Search Results

Search found 36003 results on 1441 pages for 'try catch'.

Page 246/1441 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro to watch TV and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing TV okay (with the new DirecTV) before I tried to run setup. (I ran setup to try to do recording with Media Center.) Hardware/Software: Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• How to set CA cert file for LDAP backend server in smbpasswd configuration

  - by hayalci

  I am having a problem with smbpasswd, an LDAP backend server and SSL/TLS certificates. The client machine that I run smbpasswd on is a Debian Etch machine, and the Ldap server is Sun DS running on Solaris. All the following occurs on the client. When I disable SSL, by setting "ldap ssl = no" in smb.conf, the smbpasswd program works without errors. When I set "ldap ssl = start tls", the following messages are printed by smbpasswd and there is a long timeout period before any password is asked by it Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! ..... long delay ..... New SMB password: Retype new SMB password: Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! smbpasswd: /tmp/buildd/openldap2-2.1.30/libraries/liblber/io.c:702: ber_get_next: Assertion `0' failed. Aborted I conducted some tests with "ldapsearch -ZZ". It was not working at first, but after I added the TLS_CACERT line to /etc/ldap/ldap.conf, /etc/libnss-ldap.conf and /etc/pam_ldap.conf, it started working. So relevant TLS sections in all those files are: ssl start_tls tls_checkpeer no tls_cacertfile /path/to/ca-root.pem TLS_CACERT /path/to/ca-root.pem But the smbpasswd program continued giving the error. I tried creating /etc/smbldap-tools/smbldap.conf file with following content (after consulting debian docs for smbldap-tools package) But as I see, smbpasswd comes with samba-common package and does not use the configuration for smbldap-tools utilities. verify="optional" cafile="/path/to/ca-root.pem" My question is: How can I set which SSL CA Certificate is used by smbpasswd program ?

  Read the article

• apt-get : Size mismatch

  - by Cédric Girard

  I created a private deb repository to spread a software and it's updates to 600 Ubuntu netbooks. Each time the network is connected, my script try to do a apt-get update. But sometimes (quite often in fact), I have this : Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch The server is an 2.2 Apache, HTTPS only. There is no error on it's logs. Here is the script : apt-get update apt-get dist-upgrade --force-yes --yes Here is the complete output of apt-get Ign https://myserver maverick Release.gpg Ign https://myserver/ubuntu/ maverick/main Translation-en Ign https://myserver maverick Release Ign https://myserver maverick/main i386 Packages/DiffIndex Ign https://myserver maverick/main i386 Packages Ign https://myserver maverick/main i386 Packages Hit https://myserver maverick/main i386 Packages Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following packages will be upgraded: majdb utilitaires voosicomat 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 6207kB/6273kB of archives. After this operation, 0B of additional disk space will be used. WARNING: The following packages cannot be authenticated! utilitaires voosicomat majdb Get:1 https://myserver/ubuntu/ maverick/main voosicomat all 2.0.1 [4755kB] Get:2 https://myserver/ubuntu/ maverick/main majdb all 1.0.17 [1452kB] Failed to fetch https://myserver/ubuntu/dists/maverick/main/binary-i386/voosicomat.deb Size mismatch Fetched 7091kB in 21s (324kB/s) E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Regards Cédric

  Read the article

• How to make ssh connection between servers using public-key authentication

  - by Rafael

  I am setting up a continuos integration(CI) server and a test web server. I would like that CI server would access web server with public key authentication. In the web server I have created an user and generated the keys sudo useradd -d /var/www/user -m user sudo passwd user sudo su user ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/var/www/user/.ssh/id_rsa): Created directory '/var/www/user/.ssh'. Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /var/www/user/.ssh/id_rsa. Your public key has been saved in /var/www/user/.ssh/id_rsa.pub. However othe side, CI server copies the key to the host but still asks password ssh-copy-id -i ~/.ssh/id_rsa.pub user@webserver-address user@webserver-address's password: Now try logging into the machine, with "ssh 'user@webserver-address'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. I checked on the web server and the CI server public key has been copied to web server authorized_keys but when I connect, It asks password. ssh 'user@webserver-address' user@webserver-address's password: If I try use root user rather than my created user (both users are with copied public keys). It connects with the public key ssh 'root@webserver-address' Welcome to Ubuntu 11.04 (GNU/Linux 2.6.18-274.7.1.el5.028stab095.1 x86_64) * Documentation: https://help.ubuntu.com/ Last login: Wed Apr 11 10:21:13 2012 from ******* root@webserver-address:~#

  Read the article

• How to enabled Printer Sharing on Web Server 2008?

  - by FarrEver

  I am installing Web Server 2008 for my home network. I have 2 USB printers that I am connecting to this machine and want to share these printers so that my other machines can print to these 2 USB printers. (I previously had Win Server 2003 on this machine and was able to share both printers fine.) File and Printer sharing Inbound Role for my Private network is enabled, when I go into Network and Sharing Center and try to turn ON Printer Sharing, it never sticks. It always stays on OFF. I go to my installed printers and try to Share them and get the following error message: Printer Settings could not be saved. Remote connections to the Print Spooler are blocked by a policy set on your machine. I have not been able to find a policy on my machine that is preventing this. I have searched a lot over the past few days and most of the results say what I have done should work and there are also a number of search results that say Printer Sharing on Web Server 2008 is not allowed and you have to hack it. Has anyone installed Web Server 2008 and shared printers before? If so, what are the detailed steps you took to get this to work?

  Read the article

• 1and1 ssh - connection refused

  - by kitensei

  I'm having troubles connecting through SSH to my 1&1 account. When I try to connect with command userXXX@host -p22 -vv I have the following output: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to mySite.com [ip_here] port 22. debug1: connect to address ip_here port 22: Connection refused Moreover, once I try to connect through SSH and it fails, even the HTTP access is dead, I cannot access the website through explorer anymore :/ please help < I'm running ubuntu 11.10 EDIT: don't know if it can help, here's the .htaccess of the 1and1 server Options +Indexes Satisfy any Order Deny,Allow Allow from 212.227.X.X Deny from all RemoveType .html .gif AuthType Basic AuthName "Access to /logs" AuthUserFile /kunden/homepages/43/d376072470/htpasswd Require user "user_here" and sftp.log: Mar 26 09:21:24 193.251.X USER_HERE Connection from 193.251.X port 51809 Mar 26 09:21:30 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:39 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:41 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:45 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:57 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 10:53:36 212.227.X tmp64459736-3228 Connection from 212.227.X port 23275 Mar 26 10:53:36 212.227.X tmp64459736-3228 Accepted password for tmp64459736-3228 from 212.227.X port 23275 ssh2 Mar 26 11:53:37 212.227.X tmp64459736-3228 Connection closed by 212.227.X Mar 26 18:58:17 212.227.X tmp64459736-5363 Connection from 212.227.X port 23353 Mar 26 18:58:17 212.227.X tmp64459736-5363 Accepted password for tmp64459736-5363 from 212.227.X port 23353 ssh2 Mar 26 19:53:36 212.227.X tmp64459736-8525 Connection from 212.227.X port 5166 Mar 26 19:53:36 212.227.X tmp64459736-8525 Accepted password for tmp64459736-8525 from 212.227.X port 5166 ssh2 Mar 26 19:58:17 212.227.X tmp64459736-5363 Connection closed by 212.227.X

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• How can I recover a Fedora 12 installation that is showing signs of disk errors?

  - by Bob Cross

  I am currently overseas (i.e., very far from my normal library of tools) and my primary machine that would normally act as the data server in the performance test that we're trying to run is failing to boot to Fedora 12 properly. This is a machine that, as of yesterday, was booting fine. However, this morning, very strange portions of the boot process were complaining with messages such as "unexpected 0x0 in rpcbind" and "bad file descriptor" (I don't have the error in front of me - scavenged a windows installation to get onto serverfault). Eventually, the boot hung for a long time at the NFS service and then brought up what looked like the KDE login screen but neither the mouse nor keyboard functioned. In olden days, I would try to get to a point where I could manage to run fsck and pray that the bad sectors would come back into alignment just long enough for me to scrape the critical data off of the machine. However, now that we live in the future, it seems like our options in situations like this should be a little more varied. Is there a way to recover a Fedora 12 installation with bad disk sectors that won't boot properly? For completeness, I am comfortable working with bootable recovery distros-on-CD and such but I don't know which one is likely to work best with modern Fedora. In the absence of guidance, I'm frantically torrenting the Fedora 12 Live CD and DVD, hoping to try rescue mode before tomorrow morning.

  Read the article

• Installing Joomla on Windows Server 2008 with IIS 7.0

  - by Greg Zwaagstra

  Hi, I have been spending the past while trying to install Joomla on a server running Windows Server 2008. I have successfully installed PHP (using Microsoft's web tool for installing PHP with IIS) and MySQL and am now trying to run the browser-based installation. Everything comes up green, I fill in the appropriate information regarding the site name, MySQL information, etc. and no errors are thrown. However, when I get to the step that asks me to remove the installation directory, I am unable to do so as Windows states it is in use by another program (I cannot fathom how this is true). Also, there is no configuration.php file that is created so if I were to manage to delete this folder I have a feeling that there would be problems. I was thinking there was some kind of a permissions issue and have set the permissions for IIS_IUSRS to have read, write, and execute permissions for the entire folder that Joomla resides in but this has not helped. Any help in this matter is greatly appreciated. ;) Greg EDIT: I decided to try and manually install Joomla by manually editing the configuration.php file. This has worked great and now I am certain there is some kind of a permissions issue going on because I am able to do everything that involves the MySQL database (create an article, edit menu items, etc.), but anything that involves making changes to Joomla installation's directory does not work (install plugins, edit configuration settings using the Global Configuration menu within Joomla, etc.) I have granted IIS_IUSRS every permission except Full Control (reading on the Joomla! forums shows that this should be enough for everything to work). This is confusing to me and I am quite stuck on this problem. EDIT 2: The bizarre thing is that in the System Info under Directory Permissions, everything turns up as Writable but then whenever I try to actually use Joomla to, for example, edit the configuration.php file using the interface, it says it is unable to edit the file.

  Read the article

• MySQL Error: FUNCTION LEVENSHTEIN already exists

  - by kgrote

  I've got an ExpressionEngine database and I exported a couple of tables from it, then dropped those tables. When I try to re-import the tables in PHPMyAdmin, I get this error: SQL query: -- -- Database: `my_db` -- DELIMITER $$ -- -- Functions -- CREATE DEFINER=`my_username`@`%` FUNCTION `LEVENSHTEIN`(s1 VARCHAR(255), s2 VARCHAR(255)) RETURNS int(11) DETERMINISTIC BEGIN DECLARE s1_len, s2_len, i, j, c, c_temp, cost INT; DECLARE s1_char CHAR; DECLARE cv0, cv1 VARBINARY(256); SET s1_len = CHAR_LENGTH(s1), s2_len = CHAR_LENGTH(s2), cv1 = 0x00, j = 1, i = 1, c = 0; IF s1 = s2 THEN RETURN 0; ELSEIF s1_len = 0 THEN RETURN s2_len; ELSEIF s2_len = 0 THEN RETURN s1_len; ELSE WHILE j <= s2_len DO SET cv1 = CONCAT(cv1, UNHEX(HEX(j))), j = j + 1; END WHILE; WHILE i <= s1_len DO SET s1_char = SUBSTRING(s1, i, 1), c = i, cv0 = UNHEX(HEX(i)), j = 1; WHILE j <= s2_len DO SET c = c + 1; IF s1_char = SUBSTRING(s2, j, 1) THEN SET cost = 0; ELSE SET cost = 1; END IF; SET c_temp = CONV(HEX(SUBSTRING(cv1, j, 1)), 16, 10) + cost; IF c > c_temp THEN SET c = [...] MySQL said: Documentation #1304 - FUNCTION LEVENSHTEIN already exists I get this error even if I drop all tables from the DB and try to import anything. The only way I can get the error to go away is to totally delete the database and re-create it. What's causing that error and how can I stop it from happening?

  Read the article

• Copying compressed files from Server 2008 R2 network share to XP client via VPN fails

  - by Dejan Janjuševic

  At the first sight the question looks similar to this one. I have experienced an odd behavior while trying to copy a certain file from Windows Server 2008 R2 network share to Windows XP Professional client via VPN. The VPN was set up using RRAS on the server machine. I will try to provide as much informations as possible in order to make the issue more clear. When trying to copy the compressed file sized ~2.5 MB (via Explorer or CMD, doesn't matter), the process stalls after some 20%, producing an error message after few seconds: Cannot copy filename: The specified network name is no longer available. If i start the command ping -t 192.168.2.1 (where the IP address specified belongs to the server) side by side with the copy command, I can clearly see that the ping command times out for few seconds as the copy process stalls. When this happens all network activities are frozen. After a few seconds, the network recovers, ping continues to run normally, however the copy process stands still before it displays the above error message. Copying other files (I tried 4-5 files), of which some are larger and some are smaller, succeeds. Seems to me that I can copy all uncompressed files. As soon as I try to copy an archive, the process freezes. Even a 707 KB large archive can't be copied. I can only reproduce this behavior on 2 machines, both Windows XP Professional, one is w/ SP2 and the other w/ SP3. Other XP clients don't have this problem, neither do Windows 7 clients. If I connect to the server using Remote Desktop Connection without using VPN from either of these 2 machines (using the same user account), I can copy anything I want normally, even these "problematic" files. Does anyone have any clue about what could possibly be going on?

  Read the article

• USB 3.0 hard disk not detected on a particular host controller?

  - by Alvin Wong

  I have a USB 3.0 hard disk which has always been working on my desktop with an XHCI. Now I just bought a notebook with an XHCI (something with Intel's Ivy Bridge setup). The first time I plug the hard disk in its 3.0 port it is detected and working. A few hours later I try to connect it again, but seems that the notebook just ignored it! The light on the hard disk didn't blink as usual (instead it is hold at on). I then tested it with my desktop again and it is working perfectly. It gets trickier when I plug it in the USB 2.0 port of that notebook it is detected and working perfectly (despite the slower speed). Then I try to plug in an USB 2.0 USB flash drive to that USB 3.0 port, and it is detected (of course as USB 2.0). So, there are two USB 3.0 ports on my notebook's XHCI. Both of them are not working with my hard disk but working perfectly fine with my USB 2.0 UFD. What's wrong with it? When I plug in the hard disk, device manager doesn't change. I've tried re-installing the driver for the XHCI, but it changes nothing. Had I broke the USB 3.0-specific pins of both USB 3.0 ports?

  Read the article

• ESXi 4.1 host not recognising existing VMFS datastore

  - by ThatGraemeGuy

  Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

  Read the article

• Monitor reset itself and now I can't set the resolution/settings back to how it was before

  - by verve

  I've had my LG 24" widescreen monitor since 2009 and 2 weeks ago I noticed the monitor turned itself off (never had it done this before) so I switched it back on to find all the settings like gamma, resolution etc. different = looked like it had been reset. Everyone in the house swears they never unplugged and plugged it back in. When I opened a webpage the fonts and zoom on the pages were different and my desktop was strange too; fonts of the icons were different etc. The screen seems blurry and when I watch movies the faces look distorted so I thought I would try to first figure out the resolution it used to be but when I go under "Adjust screen resolution" none of the options work and there is no recommended resolution marked; all the options stretch out the screen and looks terrible so right now I have it set to the least distorted one. Then since the resolution wasn't working I set the other manual settings(done by physical buttons on the monitor) back to how it used to be (luckily, I had written these down). The monitor looks better but the resolution makes it a strain to use. I thought maybe some Windows update caused this crap so I tried to System Restore: didn't work. What went wrong? A few questions: 1) What was the likely cause of the monitor shutting down itself and screwing up the settings I have been using since the day I bought the monitor? 2) Why have the fonts changed everywhere unless this is a HDD/video card problem? 3) How do I find the perfect resolution it used to be? The monitor wants me to set it to 1920 x 1080 but that isn't one of the options although I don't remember what resolution I used before. I use the 16:9 setting while I try the available resolution options but nothing looks good! How do I find what it used to be? Manual available in PDF under Support: http://www.lg.com/ca_en/computer-products/monitors/LG-lcd-monitor-W2442PA-BF.jsp Win 7. IE 9.

  Read the article

• Why does notepad crash on desktop files in the save-as dialog?

  - by deepc

  Here's a puzzling problem - maybe somebody has an idea. Right now I am out of ideas. On Win7 64bit, the following crashes Notepad: On Desktop, right click, select "New | Text Document". This creates "New Text Document.txt". Right click on that file, select "Edit". This opens notepad with the empty file. Select "File | Save as": Notepad crashes and Win7 reports that "Notepad has stopped working". Now, move the file to c:\temp and repeat steps 2 and 3: no crash this time and the save-as dialog appears normally. I can create similar steps for the "open" dialog. Things I have tried: Safe mode - does not work, same problem Create a new user and try again logged in as that user - no crash Name file differently, or create elsewhere and then move to desktop - same problem Use Wordpad instead - same problem Review shell extensions with ShellExView - nothing extraordinary here Stare at the event log entries for each of the crashes. Does not enlighten me. At time of crash look at the process explorer stack view. Hangs at a function "TaskDialog". sfc.exe /scannow repaired some files but the problem persists. This is how the event log entries look like: Log Name: Application Source: Application Error Date: 14.12.2010 00:33:48 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Description: Faulting application name: NOTEPAD.EXE, version: 6.1.7600.16385, time stamp: 0x4a5bc9b3 Faulting module name: COMCTL32.dll, version: 6.10.7600.16661, time stamp: 0x4c6f6e4b Exception code: 0xc000041d Fault offset: 0x00000000000db770 Faulting process id: 0x198 Faulting application start time: 0x01cb9b1e140ab92a Faulting application path: C:\Windows\system32\NOTEPAD.EXE Faulting module path: C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_fa62ad231704eab7\COMCTL32.dll What else should I try, short of dumping my user and starting over with a new profile? Thanks...

  Read the article

• How to link to a subfolder of a share?

  - by Nicolas Raoul

  On my Windows XP server, a folder called Share2 is shared. It contains a subfolder called folder3. The guest account is protected by a password, which means network users have to type the guest password to access it. When a user types \\server\Share2 in his file explorer, he is prompted for a password. When a user types \\server\Share2\folder3 in his file explorer, an error appears. He is not even prompted for a password. This is problematic because I want to link to this particular folder. How can I link to folder3? Notes: - Both Desktop shortcuts and HTML links in IE7/8 give an error if I link to folder3, but work if I just link to Share2. - Using the file:// syntax instead of the \\ syntax leads to the same results. - Password setting per http://www.lancelhoff.com/how-to-password-protect-a-shared-folder - Not using "Simple File Sharing" - The error message is ???????????????????????? which means "could not find it. check the path and try again". No English Windows around to try, sorry! It is easy to reproduce the problem though, so can anyone post the English error message for the sake of searchability? Thanks!

  Read the article

• Thundrbird 3: can't change column width?

  - by rumtscho

  I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly?

  Read the article

• CentOS 5.6: How to resolve php53 RPM dependency conflict with php-mcrypt and php-common?

  - by Stefan Lasiewski

  We are running a CentOS 5.6 system, and want to install php53 with php-mcrypt. However, this introduces a dependency conflict between php-common & php53-common. Does anyone have a good workaround for this problem? host # yum install php-mcrypt Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: linux.mirrors.es.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-mcrypt.x86_64 0:5.1.6-15.el5.centos.1 set to be updated --> Processing Dependency: php-api = 20041225 for package: php-mcrypt --> Processing Dependency: php >= 5.1.6 for package: php-mcrypt --> Running transaction check ---> Package php.x86_64 0:5.1.6-27.el5_5.3 set to be updated --> Processing Dependency: php-cli = 5.1.6-27.el5_5.3 for package: php ---> Package php-common.x86_64 0:5.1.6-27.el5_5.3 set to be updated --> Running transaction check ---> Package php-cli.x86_64 0:5.1.6-27.el5_5.3 set to be updated --> Processing Conflict: php53-common conflicts php-common --> Finished Dependency Resolution php53-common-5.3.3-1.el5_6.1.x86_64 from installed has depsolving problems --> php53-common conflicts with php-common Error: php53-common conflicts with php-common You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest This is apparently a known problem (See php-devel, Bug 700179 and Bug 695708) and this post at the CentOS forums, but there is no official fix yet.

  Read the article

• Windows Media Center showing Jerky Video on PC

  - by Kris Erickson

  I had to repave my Windows 7 x64 box last week due to a hard drive crash, and for a while everything was running perfectly but now all videos in Windows Media Center are jerky (the sound is fine, they just seem to skip a ton of frames all the time). This is on the local machine, but the same thing happens when I try to stream to my Xbox. The videos all show fine in VLC and Windows Media Player. I guess I must have installed something recently (in the process of getting all the apps I usually have running on my PC) that caused this but for the life of me I can't figure it out. I have updated to the latest video driver (and then rolled back to the standard Windows 7 driver), I have rolled back all the other drivers that I have installed (I believe). I have uninstalled all the codec packs (I also run TVersity, so I hate the TVersity codec pack installed), and I uninstalled TVersity. Nothing seems to help. I have uninstalled windows media center, and reinstalled it from the Programs and Features. I have basically ran out of things to try to fix this, and am almost thinking about reinstalling Windows again. Any suggestions?

  Read the article

• 403 with Apache and Symfony on Ubuntu 10.04

  - by Dominic Santos

  I'm trying to run symfony on my apache installation (I'm using xampp for the whole package) and it keeps giving me a 403 error every time I try to access my website. I've got vhosts set up with the following: <VirtualHost *:80> ServerName localhost DocumentRoot "/opt/lampp/htdocs" DirectoryIndex index.php <Directory "/opt/lampp/htdocs"> AllowOverride All Allow from All </Directory> </VirtualHost> <VirtualHost *:80> ServerName servername.localhost DocumentRoot /home/me/web/server/web DirectoryIndex index.php Alias /sf "/lib/vendor/symfony/data/bin/web/sf" <Directory "/home/me/web/server/web"> AllowOverride All Allow from All </Directory> </VirtualHost> <Directory "/lib/vendor/symfony/data/bin/web/sf"> Allow from All </Directory> I've also added "127.0.0.1 servername.localhost" in my hosts file. When I try to access "servername.localhost" it just gives me a 403 error. I've chmod'd 777 the symfony directory and my website directory in my home directory and used './symfony project:permissions' to let symfony check that permissions are set up correctly but still not result. If I move my website directory into "/opt/lampp/htdocs" then it will serve it from there but still has problems access the symfony stuff such as the debug toolbar. Any help would be appreciated.

  Read the article

• ios7 loops on the "trust this computer" dialog

  - by gcb

  trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

  Read the article

• not able to register sip user on red5server, using red5phone

  - by sunil221

  I start the red5, and then i start red5phone i try to register sip user , details i provide are username = 999999 password = **** ip = asteriskserverip and i got --- Registering contact -- sip:[email protected]:5072 the right contact could be --- sip :99999@asteriskserverip this is the log: SipUserAgent - listen -> Init... Red5SIP register [SIPUser] register RegisterAgent: Registering contact <sip:[email protected]:5072> (it expires in 3600 secs) RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout RegisterAgent: Failed Registration stop try. Red5SIP Client leaving app 1 Red5SIP Client closing client 35C1B495-E084-1651-0C40-559437CAC7E1 Release ports: sip port 5072 audio port 3002 Release port number:5072 Release port number:3002 [SIPUser] close1 [SIPUser] hangup [SIPUser] closeStreams RTMPUser stopStream [SIPUser] unregister RegisterAgent: Unregistering contact <sip:[email protected]:5072> SipUserAgent - hangup -> Init... SipUserAgent - closeMediaApplication -> Init... [SIPUser] provider.halt RegisterAgent: Registration failure: No response from server. [SIPUser] SIP Registration failure Timeout please let me know if i am doing anything wrong. regards Sunil

  Read the article

• Need Help getting perl module DBD::mysql installed for bugzilla on RedHat.

  - by Alos Diallo

  Hi everyone I am having some issues getting Bugzilla setup, I have the software on the server and am trying to get the pre-rec's setup. I am using RedHat 4.1.2-42. I have all of the required perl modules save one:DBD::mysql When I try: sudo perl install-module.pl DBD::mysql I get the following response(this is only an excerpt): rm -f blib/arch/auto/DBD/mysql/mysql.so LD_RUN_PATH="/usr/lib64/mysql:/usr/lib64:/lib64" /usr/bin/perl myld gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic dbdimp.o mysql.o -o blib/arch/auto/DBD/mysql/mysql.so \ -L/usr/lib64/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -L/usr/lib64 -lssl -lcrypto \ /usr/bin/ld: skipping incompatible /usr/lib/libssl.so when searching for -lssl /usr/bin/ld: skipping incompatible /usr/lib/libssl.a when searching for -lssl /usr/bin/ld: cannot find -lssl collect2: ld returned 1 exit status make: * [blib/arch/auto/DBD/mysql/mysql.so] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible I then tried the following: CFLAGS="-I/usr/lib64/mysql:/usr/lib64:/lib64" perl install-module.pl DBD::mysql I get the same result. I have also tried to install it using CPAN but also get the same result. Right now I have DBD-mysql v3.0007 but need (v4.00) Also when I try to install open ssl it says I have the latest version. Does anyone know what I have to do to get this to work? Any help would be greatly appreciated. Thank you

  Read the article

• Does MySQL log successful or attempted queries?

  - by Nathan Long

  I'm trying to track down a hit-or-miss bug in a web application. Sometimes a request completes just fine; sometimes it hangs and never finishes. I see that Apache now has several requests listed on the server-status page as "sending reply," and that doesn't change. I'm testing on localhost, so there shouldn't ever be more than one. Out of curiosity, I set MySQL to log all queries and I'm tail -fing the log file. When things go OK, I see a pattern like this: 20 Connect root@localhost on dbname 20 Query (some query #1) 20 Query (some query #2) (etc) 20 Quit 21 Connect (etc) When it hangs, I see a pattern like this: 22 Connect root@localhost on dbname 22 Query (some query #1) //nothing happens, so I try the post again 23 Connect root@localhost on dbname 23 Query (some query #1) //nothing happens; try again 24 Connect (etc) Here's my question: is MySQL logging attempted queries, or successful queries? In other words, if the last line I see is query #1, does that imply that query #1 or query #2 is hanging? My guess is that the one I don't see is the problem, because the last one I see looks fine, but maybe the one I don't see is too screwed-up for MySQL to process. Thoughts?

  Read the article

• How to route public static IP to a virtual machine on a vmware ESXi host?

  - by Kevin Southworth

  I have 5 static IPs from my ISP (Comcast) and I have a physical machine with VMware ESXi 4.0 on it that is hosting multiple virtual machines. Right now I am just using the default vmware virtual network (vswitch0) with DHCP from the Comcast IP Gateway Router and everything is working fine. Each virtual machine can access the internet, etc. One of my virtual machines is a webserver (Windows Server 2008) and I want to assign it to 1 of my 5 static IPs so it's accessible from the public internet, while leaving the other VMs on the internal LAN still using DHCP. If I just plug my laptop directly into the Comcast IP Gateway (it has 4 ports on the back) and assign my laptop a Static IP using the windows networking dialogs, then I can hit my laptop from the public internet and it works great. However, if I try to do the same steps to set a static IP config on my Windows Server 2008 VM, it does not work. The VM cannot access the internet (open Firefox and try to visit google.com), and I cannnot see the VM from the public internet either. I'm assuming I'm missing something in the ESXi config somewhere, but I'm pretty new to ESXi and I'm not sure how to configure it to work this way.

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >