Search Results

Search found 8873 results on 355 pages for 'auto populate'.

Page 247/355 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• Remove Kernel Lock from Unmounted Mass Storage USB Device from the Command Line in Linux

  - by Casey

  I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. The output of gphoto2 is then: # gphoto2 --list-config /Camera Configuration/Picture Settings/resolution /Camera Configuration/Picture Settings/shutter /Camera Configuration/Picture Settings/aperture /Camera Configuration/Picture Settings/color /Camera Configuration/Picture Settings/flash /Camera Configuration/Picture Settings/whitebalance /Camera Configuration/Picture Settings/focus-mode /Camera Configuration/Picture Settings/focus-pos /Camera Configuration/Picture Settings/exp /Camera Configuration/Picture Settings/exp-meter /Camera Configuration/Picture Settings/zoom /Camera Configuration/Picture Settings/dzoom /Camera Configuration/Picture Settings/iso /Camera Configuration/Camera Settings/date-time /Camera Configuration/Camera Settings/lcd-mode /Camera Configuration/Camera Settings/lcd-brightness /Camera Configuration/Camera Settings/lcd-auto-shutoff /Camera Configuration/Camera Settings/camera-power-save /Camera Configuration/Camera Settings/host-power-save /Camera Configuration/Camera Settings/timefmt Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command. Update 1: # mount | grep sdg # mount | grep sg7 # umount /dev/sg7 umount: /dev/sg7: not mounted # umount /dev/sdg umount: /dev/sdg: not mounted # gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') ***

  Read the article

• How can I make my PCI-E graphics card visible to Ubuntu when the motherboard has integrated graphics

  - by Norman Ramsey

  I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first: Integrated graphics PCI graphics PCI-Express graphics (PEG) I set the BIOS on PEG, but I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.) I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one. Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says Current usage: Unknown There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset! Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power. It gets all its power from the PCI-E slot; there is no external power connector. The BIOS is an AMI Award BIOS. My question: how can I make the PCI Express graphics card visible to Ubuntu?

  Read the article

• Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

  - by Synetech inc.

  Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

  Read the article

• Configure IPv6 routing

  - by godlark

  I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

  Read the article

• Vista ICS issue

  - by Bill Grey

  I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

  Read the article

• How do I prevent Pidgin from loading XMPP chat room history on join?

  - by Mr. Jefferson

  In Pidgin, when I join a chat room, it loads the chat room history. iChat on the Mac has a preference in the Accounts section to set a variable amount of history to load, or disable loading history entirely. How do I do the same thing in Pidgin? Is there a preference somewhere that I've missed? The object is to have the chat room start fresh each day, so I'd also be fine with disabling chat room history entirely on the server if that's possible. But I didn't see that option either when I looked in Server Admin on the server. I found this list of XMPP room types, and it looks like creating a Temporary Room might be the best way to do this, but I don't want to have to create the room manually every morning. Right now I've got Pidgin set to auto-join the room when I log in; I want it to do that without loading history. EDIT: The XMPP multi-user chat spec referenced above also contains a section on managing history. And I got this to work by pulling up the XMPP Console plugin in Pidgin, copying the <presence /> stanza it sent when I joined the room, closing the room, pasting the stanza into the console, adding the <history /> element and sending it. When I opened the room again, I had no history. But it all came back the next time! So: how do I get Pidgin to send the <history /> stanza by default?

  Read the article

• Port forwarding + shared connection with Ubuntu

  - by Joey Adams

  Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

  Read the article

• Cachefilesd (cachefiles) everything seems to be set up, still not working

  - by Evgenius

  I'm trying to set up cachefilesd to work with my network folder shared using NFS. I have seemingly everything set up, however cachefilesd starts normally, however caching isn't functioning. Here is output of commands, which I ran in the same order 1 sudo mount ... cache-1:/mnt/datashared on /mnt/nfsshare type nfs (rw,sync,ac,acregmin=3,acregmax=60,acdirmin=30,acdirmax=300,lookupcache=pos,vers=3,fsc) ... 2 lsbmod | grep cachefiles cachefiles 40555 1 fscache 57430 4 nfs,cifs,cachefiles,nfsv4 3 [edited - deleted] 4 uname -r 3.8.0-34-generic 5 grep CONFIG_NFS_FSCACHE /boot/config-3.8.0-34-generic CONFIG_NFS_FSCACHE=y 6 lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring 7 sudo service cachefilesd restart * Restarting FilesCache daemon cachefilesd [ OK ] 8 dmesg [6211206.141781] FS-Cache: Withdrawing cache "mycache" [6211210.135236] FS-Cache: Cache "mycache" added (type cachefiles) [6211210.135242] CacheFiles: File cache on sdb1 registered [6214644.348929] CacheFiles: File cache on sdb1 unregistering [6214644.348935] FS-Cache: Withdrawing cache "mycache" [6214654.575909] FS-Cache: Cache "mycache" added (type cachefiles) [6214654.575915] CacheFiles: File cache on sdb1 registered 9 ps aux | grep cachefilesd root 65399 0.0 0.0 4460 540 ? Ss 23:14 0:00 /sbin/cachefilesd 1000 65464 0.0 0.0 8160 916 pts/0 S+ 23:16 0:00 grep --color=auto cachefilesd finally, biggest problem is 10 cat /proc/fs/nfsfs/volumes NV SERVER PORT DEV FSID FSC v3 64476645 801 0:24 233e020f0da07a93 no tl;dr I think I configured everything properly but FSC mount option + fscachefilesd don't seem to work

  Read the article

• Can't start Bind9 on Ubuntu 10.04 + Plesk 10.1 - "named: no process found"

  - by bradley.ayers

  I've installed a fresh version of Ubuntu 10.04 64bit, I didn't install bind when choosing what packages should be installed in the Ubuntu installer. I downloaded the auto installer for Plesk 10.1 and installed it successfully. When I logged into the Plesk control panel and tried to change the password, it failed because it couldn't restart bind. I SSH'd into the box and tried a sudo /etc/init.d/bind9 restart and get the following: brad@ws01:/root# sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) rndc: connect failed: 127.0.0.1#953: connection refused named: no process found [ OK ] * Starting domain name service... bind9 [fail] Looking at tail /var/log/messages reveals a whole bunch of: Feb 23 16:08:21 ws01 kernel: [ 3840.065851] type=1503 audit(1298441301.831:31): operation="open" pid=5565 parent=5563 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=108 ouid=0 name="/var/named/run-root/etc/named.conf" Edit: After following ooshro's advice, bind runs, however I still get the named: no process found error: brad@ws01:/etc/apparmor.d$ sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) named: no process found [ OK ] * Starting domain name service... bind9 [ OK ]

  Read the article

• Resizing a LUKS encrypted volume

  - by mgorven

  I have a 500GiB ext4 filesystem on top of LUKS on top of an LVM LV. I want to resize the LV to 100GiB. I know how to resize ext4 on top of an LVM LV, but how do I deal with the LUKS volume? mgorven@moab:~% sudo lvdisplay /dev/moab/backup --- Logical volume --- LV Name /dev/moab/backup VG Name moab LV UUID nQ3z1J-Pemd-uTEB-fazN-yEux-nOxP-QQair5 LV Write Access read/write LV Status available # open 1 LV Size 500.00 GiB Current LE 128000 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 2048 Block device 252:3 mgorven@moab:~% sudo cryptsetup status backup /dev/mapper/backup is active and is in use. type: LUKS1 cipher: aes-cbc-essiv:sha256 keysize: 256 bits device: /dev/mapper/moab-backup offset: 3072 sectors size: 1048572928 sectors mode: read/write mgorven@moab:~% sudo tune2fs -l /dev/mapper/backup tune2fs 1.42 (29-Nov-2011) Filesystem volume name: backup Last mounted on: /srv/backup Filesystem UUID: 63877e0e-0549-4c73-8535-b7a81eb363ed Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131071616 Reserved block count: 0 Free blocks: 112894078 Free inodes: 32044830 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stride: 128 RAID stripe width: 128 Flex block group size: 16 Filesystem created: Sun Mar 11 19:24:53 2012 Last mount time: Sat May 19 13:29:27 2012 Last write time: Fri Jun 1 11:07:22 2012 Mount count: 0 Maximum mount count: 100 Last checked: Fri Jun 1 11:03:50 2012 Check interval: 31104000 (12 months) Next check after: Mon May 27 11:03:50 2013 Lifetime writes: 118 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: 383bcbc5-fde9-4720-b98e-2d6224713ecf Journal backup: inode blocks

  Read the article

• Split horizon, route filtering, and having RIPv2 announce a non-attached route to host

  - by Paul

  Routers A, B & C live at 10.1.1.1, 10.1.1.2 and 10.1.1.3 on a /24 metro Ethernet subnet. Each router also has its own private subnet on another interface. Router B's private subnet links thru a firewall to a 10.20.20.0 network at another organization. Router B redistributes to A and C several static routes for hosts on 10.20.20.0. However, a new host 10.20.20.5/32 must be reached via a different path that goes through router C. I know that C can advertise this host-based route with no problem, but I'd like to keep all my 10.20.20.x static routes in one place. So, how can B tell A via RIPv2 to send packets for 10.20.20.5/32 to C? So far it looks like I need no ip split-horizon on router B's 10.1.1.2 interface, perhaps because B has already learned from C other routes with a next hop of 10.1.1.3. But how does RIPv2 split horizon with no auto-summary and network 10.0.0.0 really work? If B learns a route to ANY 10.x.x.x network or host from A or C, is that enough for split horizon to keep it from redistributing ip route 10.20.20.5 255.255.255.255 10.1.1.3? And if I want to suspend split horizon only for this one new host, how do I filter out the mess of regurgitated routes that B advertises when I try no ip split-horizon? Thanks much.

  Read the article

• BitLocker with Windows DPAPI Encryption Key Management

  - by bigmac

  We have a need to enforce resting encryption on an iSCSI LUN that is accessible from within a Hyper-V virtual machine. We have implementing a working solution using BitLocker, using Windows Server 2012 on a Hyper-V Virtual Server which has iSCSI access to a LUN on our SAN. We were able to successfully do this by using the "floppy disk key storage" hack as defined in THIS POST. However, this method seems "hokey" to me. In my continued research, I found out that the Amazon Corporate IT team published a WHITEPAPER that outlined exactly what I was looking for in a more elegant solution, without the "floppy disk hack". On page 7 of this white paper, they state that they implemented Windows DPAPI Encryption Key Management to securely manage their BitLocker keys. This is exactly what I am looking to do, but they stated that they had to write a script to do this, yet they don't provide the script or even any pointers on how to create one. Does anyone have details on how to create a "script in conjunction with a service and a key-store file protected by the server’s machine account DPAPI key" (as they state in the whitepaper) to manage and auto-unlock BitLocker volumes? Any advice is appreciated.

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• Lion server profile manager, device enrollment doesn't work

  - by user964406

  I am in the process of setting up Lion Servers profile manager to manage iPads on our local school network. I don't need to manage them while they are outside the network. I have successfully had it working on my personal network. The school network is behind a proxy which we have no control over. I can get the iPads to view the mydevices page and install a trust cert. I have managed to get an iPad to successfully install the remote management profile. After this the profile manager bugs out. It will list the active task of 'new device (sending)' but it's unable to complete the task. If I click on the device on profile manager and try any of the actions out they will all fail to complete. I am using the auto generated certificates and this works if I bring the server and iPad outside of the school network. Shortly after device enrollment the system log on the Lion server reports the following Replaced the actual ip address with INTERNALIP Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini applepushserviced[778]: Got connection error Error Domain=NSPOSIXErrorDomain Code=1 "The operation couldn\u2019t be completed. Operation not permitted" UserInfo=0x7fa483b1a340 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS} Jun 4 08:40:53 mini applepushserviced[778]: Failed to get client cert on attempt 2, will retry in 15 seconds Does anyone have any ideas on how to get past this stage? Thanks in advance.

  Read the article

• Selenium server causes crazy load on server - how to prevent?

  - by Eric

  I'm running this linux: Linux host.themepark.com 2.6.32-220.4.1.el6.x86_64 #1 SMP Tue Jan 24 02:13:44 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux And I run the Selenium stand-alone server on my box with this command: java -jar /home/l/cron/selenium-server-standalone-2.24.1.jar > /logs/selenium.log 2>&1 & Here's the problem: as soon as I do that, the server load starts skyrocketing. I even went back and downloaded older versions of the Selenium server, but same results with 2.23.1, 2.23.0, and 2.19.0. Note that the server load starts going nuts before I issue ANY commands to Selenium or do anything else. All I'm doing is firing up the server, per the command above. This used to work perfectly on my server without causing massive server load, so something has changed, but I'm not sure what. My server is a managed VPS so I don't know if there is some kind of auto-update script that kicked in or what... but it's a problem. (Incidentally, even though the server load climbs like crazy, everything still works: after firing up Selenium, my server creates a screen with Xvfb so Firefox will be happy, then a PHP script talks to Selenium to do what it needs to do before shutting everything down. It takes a LONG time, and the load gets all the way up to 8 [!!!] before it is finished, which kills my web server and makes the main site horribly unresponsive... but it does get everything done.) Any suggestions for what is going on, why it's started doing this and/or, most importantly, how I can make Selenium not kill the server when it starts up... would be GREATLY appreciated!

  Read the article

• o3d javascript uncaught referenceerror

  - by David

  hey, im new to javascript and am intersted in creating a small o3d script: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Test Game Website</title> </head> <body> <script type="text/javascript" src="o3djs/base.js"></script> <script type = "text/javascript" id="myscript"> o3djs.require('o3djs.camera'); window.onload = init; function init(){ document.write("jkjewfjnwle"); } </script> <div align="background"> <div id="game_container" style="margin: 0px auto; clear: both; background-image: url('./tmp.png'); width: 800px; height:600px; padding: 0px; background-repeat: no-repeat; padding-top: 1px;"></div> </div> </body> </html> the browser cant seem to find o3djs/base.js in this line <script type="text/javascript" src="o3djs/base.js"></script> and gives me an uncaught referenceerror at this line o3djs.require('o3djs.camera'); Obviously, because it can't find the o3djs/base.js... I have installed the o3d pluggin from google and they say that should be IT ive tried on firefox, ie and chrome thanks

  Read the article

• SMB access from XP to Windows 2008 R2

  - by Pablo

  Here's the thing... I have a very slow file copy performance from Windows XP clients to Windows 2008R2 servers. Here are the facts: Windows XP to Windows 2K3: Fast Windows XP to Windows 2K8: Very Slow Windows 7 to Windows (any): Fast Despite the fact that the obvious solution would be to upgrade to Windows 7, well, we have 900 desktops so it's not an option in the short time. I have tried everything: Disabling SMB2.0, disabling security signatures, changing the TCP Window size, disabling the W2K8 auto tuning, upgraded the drivers, etc. We eliminated the network; both the server and the client are connected to the same core switch (no hops, no routers, same VLAN). Upon monitoring the network with a packet capture utility, we see that the SMB packets being exchanged between the W2K8 and the XP machines are very small packets (256 bytes); despite the fact that the MTUs are properly set (1500) and there is no fragmentation whatsoever. In fact, those SMB packets show, on the IP datagram, that the window is 65535 or close. The same trace, made using the same application but instead of using a W2K8 share uses a Windows XP share (and that goes FAST) shows SMB packets of 4096 bytes. I can post the traces if necessary. So, why does XP-W2K8 negotiation arrange for 24-bytes SMB payload, whereas the XP-XP negotiation arranges for 4096 SMB packets? Any ideas? I am running short of those...

  Read the article

• Windows 2003 DNS or IIS6 Problem?

  - by Mario

  Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

• DIY NAS - links for Instructions

  - by Kaushik Gopal

  Good folk of SU, I'm planning to build a NAS (Network Access Storage). I'm planning to do it cheap (:read Old PC Config + Open source software). I was looking for good DIY links . Before you shoot this down as a Repost, I'm only looking for good links containing detailed instructions for setting up a NAS. I did a fair bit of searching and found these links (so please suggest others. While these links are great they delve more on the hardware side, i'm looking for more instructions in the software side). For the sake of the interwebs: Ubuntu: http://snarfquest.com/wiki/index.php/Setting_up_a_Home_NAS http://www.smallnetbuilder.com/content/view/27962/77/ http://jonpeck.blogspot.com/2006/11/how-to-configure-80-fileserver-in-45.html FreeNAS http://www.smallbusinesscomputing.com/webmaster/article.php/3719706 http://www.codeproject.com/KB/system/homemade_nas.aspxhttp://www.codeproject.com/KB/system/homemade_nas.aspx There was one at rubbervir.us that everyone points to, but apparently the site has gone down. A couple of other queries: Is Printer/Scanner sharing a possibility with NAS devices? Many talk of torrent support with NAS Devices, a little more light on this? Does this mean, an auto download of torrent through a feed into NAS, or just support for storing Torrent download files onto the NAS(don't see the difference between the latter and a normal file tranfer)

  Read the article

• Mounting NAS drive with cifs using credentials file through fstab does not work

  - by mahatmanich

  I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

  Read the article

• .com domain transfer failing

  - by digital

  Hi, I'm trying to transfer one of my .com addresses between registrars. I'm down as the owner contact (confirmed working) and the losing registrar is down as the tech and admin contact. Last week I received an email stating that the domain transfer had been rejected by the losing registrar. I contacted the losing registrar and they denied that. My money from the winning registrar was refunded and I was told to try again. I've initiated the transfer again and received confirmation of pending transfer, I gave the correct EPP code and confirmed the transfer. Currently the status on the domain is set as OK, should it not be transfer pending? According to my name.com transfer page if the transfer is not authd in 5 days it will auto transfer anyway. I don't believe this will happen. Name.com have been really helpful but they can't really do much more now. The losing registrar is not being helpful hence me turning here. What can I do to make sure the domain transfers? The domain transfer is set to expire on the 17th. Any help would be greatly appreciated.

  Read the article

• Windows 7: Windows Firewall: Logging/Notifying on Outgoing Request Attempts

  - by Maxim Z.

  I'm trying to configure Windows Firewall with Advanced Security to log and tell me when programs are trying to make outbound requests. I previously tried installing ZoneAlarm, which worked wonders for me with this in XP, but now, I'm unable to install ZA on Win7. My question is, is it possible to somehow monitor a log or get notifications when a program tries to do that if I set all outbound connections to auto-block, so that I can then create a specific rule for the program and block it.? Thanks! UPDATE: I've enabled all the logging options available through the Properties windows of the Windows Firewall with Advanced Security Console, but I am only seeing logs in the %systemroot%\system32\LogFiles\Firewall\pfirewall.log file, not in the Event Viewer, as the first answer suggested. However, the logs that I can see only tell me the request's or response's destination IP and whether the connection was allowed or blocked, but it doesn't tell me what executable it comes from. I want to find out the file path of the executable that each blocked request comes from. So far, I haven't been able to.

  Read the article

• PXE bootable image for terminal server?

  - by HeavenCore

  We have 300 windows xp machines on cruddy old hardware across the company. With extended support for XP ending April next year we're looking into our options. Couple of options: Replace the 300 PC's with full windows 7 PC's (£100k +?) - no use of terminal server (our current model) Replace the 300 PC's with off the shelf thin clients & make use of our terminal server - Cheaper clients but Terminal Server CALS required? Keep the 300 PC's, replace windows XP with linux thin client capable of connecting to our terminal server - no hardware costs, just Terminal Server CALS required? Keep the 300 PC's - remove hard drives and make use of a PXE bootable "thin client" to connect to our terminal server If we were to choose option 4, what our the options out there? Is there any official PXE bootable thin clients for terminal server out there? If so, what are the licence requirements? Is there options we haven’t considered? There must be lots of companies out there in this situation - curious what the current trend is for this problem? Edit: Option 5 - Create a bootable Windows PE image with RDP auto start and use that as a "thin client" for our terminal server - is Windows PE licence free in such a model?

  Read the article

• Authenticate users with Zimbra LDAP Server from other CentOS clients

  - by efesaid

  I'am wondering that how can integrate my database,web,backup etc.. centos servers with Zimbra LDAP Server. Does it require more advanced configuration than standart ldap authentication ? My zimbra server version is [zimbra@zimbra ~]$ zmcontrol -v Release 8.0.5_GA_5839.RHEL6_64_20130910123908 RHEL6_64 FOSS edition. My LDAP Server status is [zimbra@ldap ~]$ zmcontrol status Host ldap.domain.com ldap Running snmp Running stats Running zmconfigd Running I already installed nss-pam-ldapd packages to my servers. [root@www]# rpm -qa | grep ldap nss-pam-ldapd-0.7.5-18.2.el6_4.x86_64 apr-util-ldap-1.3.9-3.el6_0.1.x86_64 pam_ldap-185-11.el6.x86_64 openldap-2.4.23-32.el6_4.1.x86_64 My /etc/nslcd.conf is [root@www]# tail -n 7 /etc/nslcd.conf uid nslcd gid ldap # This comment prevents repeated auto-migration of settings. uri ldap://ldap.domain.com base dc=domain,dc=com binddn uid=zimbra,cn=admins,cn=zimbra bindpw **pass** ssl no tls_cacertdir /etc/openldap/cacerts When i run [root@www ~]# id username id: username: No such user But i am sure that username user exist on ldap server. EDIT : When i run ldapsearch command i got all result with credentials and dn. [root@www ~]# ldapsearch -H ldap://ldap.domain.com:389 -w **pass** -D uid=zimbra,cn=admins,cn=zimbra -x 'objectclass=*' # extended LDIF # # LDAPv3 # base <dc=domain,dc=com> (default) with scope subtree # filter: objectclass=* # requesting: ALL # # domain.com dn: dc=domain,dc=com zimbraDomainType: local zimbraDomainStatus: active . . .

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >