backup profile - Page 247

interesting uses for a headless host running Ubuntu.

- by Manuel

Hey! So, I have configured a pc with no monitor, keyboard or mouse running Ubuntu. I use it as a ssh server, file backup, web server, etc. Though, it seems as if I could use it for sooo much more. The problem is I can't think of many more uses. What interesting uses of a headless host have you heard of? Is there a cool trick you want to share? Thanks! Manuel

Read the article

How can I connect a SAS drive to USB? [closed]

- by dave

I have a Dell T710 with Seagate Cheetah 15k.7 SAS disks. If the T710 motherboard dies, I'll need to resort to one of my nightly off-site backups and salvage the journal/logfile from the SAS disk to bring the backup bang up-to-date. I need a way of reading the healthy-but-inaccessible SAS disc that does not depend on the only SAS-capable machine I have to hand. So I bought: SAS to SATA Adapter and: USB 2.0 to SATA Adapter with Power ...so that I could read the SAS drive via USB. I can plug it all together just fine. The chain looks like: USB - SATA - SAS. But the drive does not spin up and the computer doesn't even acknowledge anything being attached by USB. Is there a cheap external enclosure I can buy for SAS drives? I can't believe these USB to SATA adapters are everywhere but the USB to SAS adapters are almost non-existent...

Read the article

Minidump folder cannot be found

- by Saxtus

Although I have enabled the creation of minidump files in my system, it appears that either Windows doesn't create them where the Startup and recovery dialog points to (%SystemRoot%\Minidump) or at least I can't find them. Even the Minidump folder under Windows directory is missing and I had numerous BSODs till now. I've searched all my HDs for mini*.dmp files only to find some old ones in a backup folder from my Vista 32-bit installation, before I install Windows 7 64-bit. Any thoughts of why this is happening and how to fix it?

Read the article

How to selectively route network traffic through VPN on Mac OSX Leopard?

- by newtonapple

I don't want to send all my network traffic down to VPN when I'm connected to my company's network (via VPN) from home. For example, when I'm working from home, I would like to be able to backup my all files to the Time Capsule at home and still be able to access the company's internal network. I'm using Leopard's built-in VPN client. I've tried unchecking "Send all traffic over VPN connection." If I do that I will lose access to my company's internal websites be it via curl or the web browser (though internal IPs are still reachable). It'd be ideal if I can selectively choose a set of IPs or domains to be routed through VPN and keep the rest on my own network. Is this achievable with Leopard's built-in VPN client? If you have any software recommendations, I'd like to hear them as well.

Read the article

CentOS PAM+LDAP login and host attribute

- by pianisteg

My system is CentOS 6.3, openldap is configured well, PAM authorization works fine. But after turning pam_check_host_attr to yes, all LDAP-auths fail with message "Access denied for this host". hostname on the server returns correct value, the same value is listed in user's profile. "pam_check_host_attr no" works fine and allows everyone with correct uid/password a piece of /var/log/secure: Sep 26 05:33:01 ldap sshd[1588]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=my-host user=my-username Sep 26 05:33:01 ldap sshd[1588]: Failed password for my-username from 77.AA.BB.CC port 58528 ssh2 Sep 26 05:33:01 ldap sshd[1589]: fatal: Access denied for user my-username by PAM account configuration Another two servers (CentOS 5.7 Debian) authorizes on this LDAP server correctly. Even with pam_check_host_attr yes! I didn't edit /etc/security/access.conf, it is empty, only default comments. I don't know what to do! How to fix this?

Read the article

Unable to create system partition or locate existing system partition during Windows-7 installation

- by glenneroo

I have Windows XP 32-bit installed on an ASUS A8N-SLI Deluxe with 2x 500gb drives in RAID1 using the NV RAID controller. On this there are 3 partitions (XP, XP backup and DATA) There are also 4x 500gb drives in RAID10 using the Silicon Image 3114R RAID controller. I just purchased a Windows 7 64-bit as an ISO download upgrade version which I promptly burned to DVD and attempted to perform an upgrade installation. Here is the error message I am getting: Firstly, where are these "Setup log files" located? Second, does this mean I need to find compatible (64-bit?) drivers for the Mainboard and put them on floppy? EDIT: As suggested on another forum, I tried downloading the nVidia Mainboard RAID drivers for Windows 2003 64-bit. I loaded the drivers successfully using the Load Driver button, but pressing NEXT still returns this error.

Read the article

OpenLDAP Password Expiration with pwdReset=TRUE?

- by jsight

I have configured the ppolicy overlay for OpenLDAP to enable password policies. These things work: Password lockouts on too many failed attempts Password Change required once pwdReset=TRUE added to user entry Password Expirations If the account is locked out due to intrusion attempts (too many bad passwords) or time (expiration time hit), the account must be reset by an administrator. However, when the administrator sets pwdReset=TRUE in the profile, this seems to also override the expiration policy. So, the password that the administrator sent out (which should be a temporary password) ends up being valid permanently. Is there a way in OpenLDAP to have a password that must be changed, but also MUST expire?

Read the article

VMware - I/O error - how to fix?

- by Maya-G

I'm running XP pro on VMware - it mounts and runs just fine. However, if I power down the VM and try to copy it, or even if I try to do a simple Mac Backup (using Carbon Copy Cloner), I get an i/o error at one very specific VMDK file. Here's a sample of the error - this from CCC: "12/20 22:49:30 Detected input/output error 12/20 22:49:33 rsync: read errors mapping "/Users/blahblah/Documents/Virtual Machines.localized/WindowsXP-Professional150G.vmwarevm/WindowsXP-Professional150G-000001-s065.vmdk": Input/output error (5)" How can I regain my ability to do backups of my Mac without this I/O error?

Read the article

Sending Mail on Linux via Bash/Command line

- by Fanvaron

I'm currently trying to send mails via bash script on linux I searched the internet and found this code: echo "This is my body" | mail -s"this is my header" [email protected] I don't get any response either in the bash nor when I type it directly in the command line. I waited for at least 3 hours now and still got no mail. I just found that the log says stat=Deferred: Connection timed out with backup-mx.mcs.de. when sending to my Mail address but also has some entries with to<[email protected]> and stat=Sent greetings

Read the article

Encoding movie files into h264

- by Shiki

Found some topics about archiving into h264, but those were about the generic questions (does it worth it, which codec to use.) I want to use h264 (with CUDA (if possible)). So far I only found Avidemux a usable encoder with x264 but it makes an unwatchable video file after the encoding (using the best profile, all setting maxed out), really blurry. Please write down detailed what to use, where to get it (if its free, doesnt matter), what to set, etc. Thanks in advance. (OS: Windows 7 ulti x64, VGA is VP2 capable with CUDA GTX260 XFX) Of course, if there is an up to date duplicate, just comment with the link and I'll remove the question ASAP.

Read the article

My PowerShell functions do not appear to be used

- by Frank

Hi there, I have a ps1 script in which I define 2 functions as such: function Invoke-Sql([string]$query) { Invoke-Sqlcmd -ServerInstance $Server -Database $DB -User $User -Password $Password -Query $query } function Get-Queued { Invoke-Sql "Select * From Comment where AwaitsModeration = 1" } I then call the ps1 file by typing it in (it's in a folder in the path, and autocompletion works) However, I cannot start using the functions. I am confused, because when I copy / paste the functions into the console, all is fine and they work. I also have a function defined in my profile, and it works. Where am I thinking wrong, why doesn't it work what I'm trying to do?

Read the article

Snow Leopard: Optimization

- by Shyam

Hi, I have bunch of questions: I have a Mac network, which has five Mac's. Right now, they are individually getting software updates. Is there a way to download the patches/security updates in a single place (repository) and point all machines to this location? Personally, I have tools like Monolingual and Onyx, but are there tools you could recommend that affect the performance of the Operating System positively? Tweaks would be nice. Links and pointers, would be really appreciated. I've read about Time machine, is there a way to backup all machines to a network drive using this tool? Thanks!

Read the article

Swapping 3Ware Raid Card - Best Procedure

- by Brian Lee Jackson

We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

Read the article

Compiling LaTeX document makes Google Drive crash

- by Sander

I've the issue that when I compile a LaTeX document that is located inside my Google Drive this will after a few turns make the OSX Google Drive application crash. As this is an important document I want to keep it all the time inside the Google Drive location to ensure cloud backup but this ofcourse is not guaranteed if this makes my Google Drive crash all the time. I don't seem te be able to identify what is causing this and I was hoping that maybe some people here have any idea what might cause this? We're talking about a 8 pages document with 3 images, so nothing crazy big or complex.

Read the article

Firefox / Iceweasel hangs at exit

- by mxp

On my Debian (testing) system, I found that for some time now Firefox hangs when exiting. There is no window visible anymore and the process utilizes one CPU core to 100%. No other instances can be started until that process is killed. I tried the Basic Troubleshooting guide but that didn't help. Starting it with iceweasel -safe-mode and then choosing none of the options but just clicking "quit" caused the same behavior. Creating a new profile also didn't change anything. Any ideas what else I could try?

Read the article

Resize Ubuntu Linux system to smaller disk inside VMware ESXi

- by mlambie

I have several Ubuntu Linux virtual machines running on VMware ESXi hosts that have all been allocated disks much larger than their required capacity. As space is now becoming an issue on our SAN, I'd like to investigate downsizing the allocated disk space on these machines. All systems will be completely backed up imaged before I begin making changes, and I will always retain a pristine backup in case the partition resizing does not work. Is there an easier way than the following procedure, or is their a better solution entirely? Shutdown and assign a second disk to the virtual machine Boot using the SystemRescueCD Use GParted to resize the original (source) partition, making it smaller Clone the new, smaller partition to the second disk Shutdown and remove initial disk from the virtual machine Reboot and force fsck to check the filesystem

Read the article

Windows Server 2012 Essentials - Trying to setup "Anywhere Access" but the "Computer Access" list for users is blank

- by tetranz

I have a new installation of Windows Server 2012 Essentials and I'm trying to setup "Anywhere Access" for both VPN and remote desktop. The basic setup is all working. Shared folders is working but remote desktop has no computers available. On the server, if I edit a user with the Essentials Dashboard and go to "Computer access", the list is empty. The desktop computers have been joined to the domain. I can see them in AD under "Computers". I think our mistake was that we didn't use the connector tool to join the domain. We moved from a previous domain and went to Computer / Properties, changed the domain and started with a new profile. Is there something I can do now to make these desktops available for remote desktop? I can access a desktop directly no problem by going directly to it with the RDP client on port 3389. I do that from the outside world through an SSH tunnel.

Read the article

Check if all files in a directory exists elsewhere

- by aioobe

I'm about to remove an old backup directory, but before doing so I'd like to make sure that all these files exist in a newer directory. Is there a tool for this? Or am I best off doing this "manually" using find, md5sum, sorting, comparing, etc? Clarification: If I have the following directory listings /path/to/old_backup/dir1/fileA /path/to/old_backup/dir1/fileB /path/to/old_backup/dir2/fileC and /path/to/new_backup/dir1/fileA /path/to/new_backup/dir2/fileB /path/to/new_backup/dir2/fileD then fileA and fileB exists in new_backup (fileA in its original directory, and fileB has moved from dir1 to dir2). fileC on the other hand is missing in new_backup and fileD has been created. In this situation I'd like the output to be something like fileC exists in old_backup, but not in new_backup.

Read the article

Munin "Available entropy" when using address space layout randomization

- by clawspoon

Having just configured Munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

Read the article

Losing windows XP files. How to retrieve them?

- by ravi

I have a portable 500 GB HDD.Since last few days, all files of some folder are getting kinda corrupted.I can't access/delete them. Here is the example. If I try to access these files/folders, I get following error. This thing is kinda spreading in my HDD.Till now it has affected two folders worth 70 GB.In which one folder is backup folder where all my important data resides.So I am really in loss if I loose this data. How can I retrieve this data? Please help.

Read the article

Does SpinRite do what it claims to do?

- by romandas

I don't have any real (i.e. professional) experience with Steve Gibson's SpinRite so I'd like to put this to the SF community. Does SpinRite actually do what it claims? Is it a good product to use? With a proper backup solution and RAID fault tolerance, I've never found need for it, but I'm curious. There seems to be some conflicting messages regarding it, and no hard data to be found either way. On one hand, I've heard many home users claim it helped them, but I've heard home users say a lot of things -- most of the time they don't have the knowledge or experience to accurately describe what really happened. On the other hand, Steve's own description and documentation don't give me a warm fuzzy about it either. So what is the truth of the matter? Would you use it?

Read the article

Toolkit & Habits for Linux Network & System Administration [closed]

- by slashmais

I am tasked with the administration of a small office network as well as several workstations running mostly Debian and Ubuntu. There are two servers: one database & print-server, and one backup & file server. Being relatively new to this side of things, knowing enough to help myself to some degree on Linux, I would like to know what software tools and tasks/habits I can use/acquire to learn this field and be effective while doings so. I don't need to know what is the best, just what a newbie sys-admin can use as a starter-pack to learn and use as a base to grow into proper system administration. [edit] What I need is those few basic tools to start with, and the kind of things I need to do regularly, e.g.: which logs to check, when & what to monitor, the kind of 'right' place to start and to which I can ad as I need.

Read the article

maven scm plugin deleting output folder in every execution

- by Udo Fholl

Hi all, I need to download from 2 different svn locations to the same output directory. So i configured 2 different executions. But every time it executes a checkout deletes the output directory so it also deletes the already downloaded projects. Here is a sample of my pom.xml: <profiles> <profile> <id>checkout</id> <activation> <property> <name>checkout</name> <value>true</value> </property> </activation> <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-scm-plugin</artifactId> <version>1.3</version> <configuration> <username>${svn.username}</username> <password>${svn.pass}</password> <checkoutDirectory>${path}</checkoutDirectory> <skipCheckoutIfExists /> </configuration> <executions> <execution> <id>checkout_a</id> <configuration> <connectionUrl>scm:svn:https://host_n/folder</connectionUrl> <checkoutDirectory>${path}</checkoutDirectory> </configuration> <phase>process-resources</phase> <goals> <goal>checkout</goal> </goals> </execution> <execution> <id>checkout_b</id> <configuration> <connectionUrl>scm:svn:https://host_l/anotherfolder</connectionUrl> <checkoutDirectory>${path}</checkoutDirectory> </configuration> <phase>process-resources</phase> <goals> <goal>checkout</goal> </goals> </execution> </executions> </plugin> </plugins> </build> </profile> Is there any way to prevent the executions to delete the folder ${path} ? Thank you. PS: I cant format the pom.xml fragment correctly, sorry!

Read the article

Call an member function implementing the {{#linkTo ...}} helper from javascript code

- by gonvaled

I am trying to replace this navigation menu: <nav> {{#linkTo "nodes" }}  {{t generic.nodes}} {{grayOut "(temporal)"}}{{/linkTo}} {{#linkTo "services" }}  {{t generic.services}}{{/linkTo}} {{#linkTo "agents" }}  {{t generic.agents}}{{/linkTo}} {{#linkTo "extensions" }}  {{t generic.extensions}}{{/linkTo}} {{#linkTo "voiceMenus" }}  {{t generic.voicemenus}}{{/linkTo}} {{#linkTo "queues" }}  {{t generic.queues}}{{/linkTo}} {{#linkTo "contacts" }}  {{t generic.contacts}}{{/linkTo}} {{#linkTo "accounts" }}  {{t generic.accounts}}{{/linkTo}} {{#linkTo "locators" }}  {{t generic.locators}}{{/linkTo}} {{#linkTo "phonelocations" }}  {{t generic.phonelocations}}{{/linkTo}} {{#linkTo "billing" }}  {{t generic.billing}}{{/linkTo}} {{#linkTo "profile" }}  {{t generic.profile}}{{/linkTo}} {{#linkTo "audio" }}  {{t generic.audio}}{{/linkTo}} {{#linkTo "editor" }}  {{t generic.node_editor}}{{/linkTo}} </nav> With a more dynamic version. What I am trying to do is to reproduce the html inside Ember.View.render, but I would like to reuse as much Ember functionality as possible. Specifically, I would like to reuse the {{#linkTo ...}} helper, with two goals: Reuse existing html rendering implemented in the {{#linkTo ...}} helper Get the same routing support that using the {{#linkTo ...}} in a template provides. How can I call this helper from within javascript code? This is my first (incomplete) attempt. The template: {{view SettingsApp.NavigationView}} And the view: var trans = Ember.I18n.t; var MAIN_MENU = [ { 'linkTo' : 'nodes', 'i-class' : 'icon-cloud', 'txt' : trans('generic.nodes') }, { 'linkTo' : 'services', 'i-class' : 'icon-phone', 'txt' : trans('generic.services') }, ]; function getNavIcon (data) { var linkTo = data.linkTo, i_class = data['i-class'], txt = data.txt; var html = '  ' + txt; return html; } SettingsApp.NavigationView = Ember.View.extend({ menu : MAIN_MENU, render: function(buffer) { for (var i=0, l=this.menu.length; i<l; i++) { var data = this.menu[i]; // TODO: call the ember function implementing the {{#linkTo ...}} helper buffer.push(getNavIcon(data)); } return buffer; } });

Read the article

Best way to grow Linux software RAID 1 to RAID 10

- by Hans Malherbe

mdadm does not seem to support growing an array from level 1 to level 10. I have two disks in RAID 1. I want to add two new disks and convert the array to a four disk RAID 10 array. My current strategy: Make good backup. Create a degraded 4 disk RAID 10 array with two missing disks. rsync the RAID 1 array with the RAID 10 array. fail and remove one disk from the RAID 1 array. Add the available disk to the RAID 10 array and wait for resynch to complete. Destroy the RAID 1 array and add the last disk to the RAID 10 array. The problem is the lack of redundancy at step 5. Is there a better way?

Search Results

Search found 9620 results on 385 pages for 'backup profile'.

Page 247/385 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254 | Next Page >

- by Manuel

- by dave

- by Saxtus

- by newtonapple

- by pianisteg

- by glenneroo

- by jsight

- by Maya-G

- by Fanvaron

- by Shiki

- by Frank

- by Shyam

- by Brian Lee Jackson

- by Sander

- by mxp

- by mlambie

- by tetranz

- by aioobe

- by clawspoon

- by ravi

- by romandas

- by slashmais

- by Udo Fholl

- by gonvaled

- by Hans Malherbe

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254 | Next Page >