Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 247/306 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • Brocken package manager due to incorrect Banshee package

    - by user54974
    Sup, so, I'm not familiar with linux at all so help is much appreciated. I've been trying to boot my pc up from a live CD unsuccessfully. I get to the stage at which there are the options to test without installing or install or so on where I select 'Install Ubuntu.' Here it relays through some fast DOS commands until it reaches 'end trace' and then, eventually, 'Killed.' I have already got a functional 11.10 version installed, could this be a problem? The reason I am attempting a reinstall is because the package system is damaged inside 11.10, a problem I can't seem to solve. If I try to install any new software from within the software centre it tells me that two banshee extensions must be removed. I try to remove these from inside the terminal, using apt-get remove, which results in:** You might want to run apt-get -f install to correct these: The following packages have unmet dependencies. banshee-extension-ubuntuonemusicstore : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). The software centre suggests that I disable all third party repositories and run apt-get install -f I have done so but the package system remains damaged and apt-get install -fattempts to install banshee 2.2.1 but returns: Errors were encountered while processing: /var/cache/apt/archives/banshee_2.2.1-1ubuntu3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I have also tried apt-get update (runs fine) and apt-get upgrade. The upgrade command apt-get upgrade results in: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. banshee-extension-soundmenu : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is installed banshee-extension-ubuntuonemusicstore : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is installed E: Unmet dependencies. Try using -f. I seem to be going round and round in circles here! If only I could reinstall successfully. Only proposed updates (oneiric proposed) is not enabled.

    Read the article

  • How to set the initial component focus

    - by frank.nimphius
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In ADF Faces, you use the af:document tag's initialFocusId to define the initial component focus. For this, specify the id property value of the component that you want to put the initial focus on. Identifiers are relative to the component, and must account for NamingContainers. You can use a single colon to start the search from the root, or multiple colons to move up through the NamingContainers - "::" will pop out of the component's naming container and begin the search from there, ":::" will pop out of two naming containers and begin the search from there. Alternatively you can add the naming container IDs as a prefix to the component Id, e.g. nc1:nc2:comp1. http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_document.html To set the initial focus to a component located in a page fragment that is exposed through an ADF region, keep in mind that ADF Faces regions - af:region - is a naming container too. To address an input text field with the id "it1" in an ADF region exposed by an af:region tag with the id r1, you use the following reference in af:document: <af:document id="d1" initialFocusId="r1:0:it1"> Note the "0" index in the client Id. Also, make sure the input text component has its clientComponent property set to true as otherwise no client component exist to put focus on.

    Read the article

  • RAID1: can't replace faulty spare (marked again as 'faulty spare' within seconds)

    - by user212475
    I got a problem that I cannot solve: Our fileserver runs XUbuntu and 3 RAID1s. One has a problem since monday: it consists of sdb and sdc. sdb was marked as faulty by mdadm for unknown reasons. I used --remove to remove it from the RAID and then to add it by --add. All was fine, re-syncing started but never got above 0% and after a few seconds, sdb was again marked as 'faulty spare' (and therefore the RAID degraded, but clean). So I saved the first 512 byte of the old sdb to a file, bought a new HDD of same size (4TB), shut down the computer and replaced sdb physically, switched the computer back on and wrote the 512 byte back to the new drive to have the same partition info as the old drive (both are the same type, from same company). But the new drive shows the same behaviour as the old: I can add, re-syncing starts and after a few seconds its marked as 'faulty spare'. Here exactly what i did: mdadm --remove /dev/md/1 /dev/sdb maadm --detail /dev/md/1 gives me: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:56:13 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2424 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc mdadm --add /dev/md/1 /dev/sdb mdadm --detail /dev/md/1 gives me: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:49 2013 State : clean, degraded, recovering Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Rebuild Status : 0% complete Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2431 Number Major Minor RaidDevice State 2 8 16 0 faulty spare rebuilding /dev/sdb 1 8 32 1 active sync /dev/sdc and after a few seconds: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:50 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2436 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc 2 8 16 - faulty spare /dev/sdb same behaviour if I zero the superblock (mdadm --zero-superblock /dev/sdb) before adding sdb. I do all commands as root and the system holds 3 more 4TB drives, ie the mainboard can handle them. The old harddrive was checked for errors using badblocks, but all is fine. Does anybody have any idea, what the problem is?

    Read the article

  • The partition table is corrupt

    - by Tim
    I have a corrupt the partition table on the laptop that is running Ubunutu 10.4. Before the partition table was corrupt I had the following partitions: 2 primary partitions: 1st - NTFS 2nd - Extended 4 logical partitons that are built within 2nd extended: 1st NTFS (68 Gib) 2nd Linux (19 Gib) 3rd Swap (1.4 Gib) 4th Linux (24 Gib) The physical order of these partitions was the following: ( 4th Linux ) - ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) The logical order of the partition was different: ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) ( 4th Linux ) NTFS partition was big and it resided between 2 Linux partitions, neither of these partitions had enough space to install Oracle 11g. Therefore, I decided to a) either move the NTFS partion to the left or b) remove it completely and extend partition where Linux resides. As I tool I have chosen GParted. But unfortunately it was not able to move the partition because he found that in NTFS partition there are some blocks that are referenced multiple times. Also it was not able to remove the partition neither, because in this case the partitions that follow it ( 2nd Linux ) - ( 3rd Swap ) have to be in his opinion also removed, because the organization of extended partition is a linked list. Since GParted was not able to do such thing I was trying to find another tool. I found diskdrake tool on PSLinuxOS distribution of linux. That tool silently deleted ( 1st NTFS ) partition and I thought that everything was fine. But diskdrake has damaged the partition in a way that I am not able either to boot from the hard disk nor to see the partitions with GParted and even with diskdrake itself! Fortunately I have a live CD of Ubuntu 8.10 and I am able to boot and see hard disk. I have 2 ideas how I can solve the problem: 1) Manually change disk partitions and point them to the correct partitions. 2) Create partition table with GParted that as much as possible is the same with the previous one I find the 2nd approach less time consuming but some data will be lost because of it is not possible to place borders of the partitions exactly how it was before. And moreover I am not sure if such approach would work, for example, if the OS is able to locate files after repartitioning. I feel like that it will but not 100% sure. Are there some ideas how the problem may be solved?

    Read the article

  • Problem Solving vs. Solution Finding

    - by ryanabr
    By enlarge, most developers fall into these two camps I will try to explain what I mean by way of example. A manager gives the developer a task that is communicated like this: “Figure out why control A is not loading on this form”. Now, right there it could be argued that the manager should probably have given better direction and said something more like: “Control A is not loading on the Form, fix it”. They might sound like the same thing to most people, but the first statement will have the developer problem solving the reason why it is failing. The second statement should have the developer looking for the solution to make it work, not focus on why it is broken. In the end, they might be the same thing, but I usually see the first approach take way longer than the second approach. The Problem Solver: The problem solver’s approach to fixing something that is broken is likely to take the error or behavior that is being observed and start to research it using a tool like Google, or any other search engine. 7/10 times this will yield results for the most common of issues. The challenge is in the other 30% of issues that will take the problem solver down the rabbit hole and cause them not to surface for days on end while every avenue is explored for the cause of the problem. In the end, they will probably find the cause of the issue and resolve it, but the cost can be days, or weeks of work. The Solution Finder: The solution finder’s approach to a problem will begin the same way the Problem Solver’s approach will. The difference comes in the more difficult cases. Rather than stick to the pure “This has to work so I am going to work with it until it does” approach, the Solution Finder will look for other ways to get the requirements satisfied that may or may not be using the original approach. For example. there are two area of an application of externally equivalent features, meaning that from a user’s perspective, the behavior is the same. So, say that for whatever reason, area A is now not working, but area B is working. The Problem Solver will dig in to see why area A is broken, where the Solution Finder will investigate to see what is the difference between the two areas and solve the problem by potentially working around it. The other notable difference between the two types of developers described is what point they reach before they re-emerge from their task. The problem solver will likely emerge with a triumphant “I have found the problem” where as the Solution Finder will emerge with the more useful “I have the solution”. Conclusion At the end of the day, users are what drives features in software development. With out users there is no need for software. In todays world of software development with so many tools to use, and generally tight schedules I believe that a work around to a problem that takes 8 hours vs. the more pure solution to the problem that takes 40 hours is a more fruitful approach.

    Read the article

  • eSTEP Newsletter for October 2013 Now Available

    - by Cinzia Mascanzoni
    The October'13 issue of our Newsletter is now available. The issue contains information on the following topics: Oracle Open World Summary Oracle Cloud: Oracle Engineered Systems Oracle Database and Middleware Oracle Applications and Software as a Service Oracle Industries Oracle Partners and the "Internet of Things" JavaOne News MySQL News Corporate News Create Your HR Strategic Vision at Oracle HCM World Oracle Database Protection Redefined A Preview: Oracle Database Backup Logging Recovery Appliance Oracle closed Tekelec acquisition Congratulations to ORACLE TEAM USA! Tech sectionARC M6 Oracle's SPARC M6 Oracle SuperCluster M6-32 - Oracle’s Most Scalable Engineered System Oracle Multitenant on SPARC Servers and Oracle Solaris Oracle Database 12c Enterprise Edition: Plug into the Cloud Oracle In-Memory Database Cache Oracle Virtual Compute Appliance New Benchmark-Results published (Sept. 2013) Video Interview: Elasticity, the Biggest Challenge Facing Data Centers Today Tech blog Announcing New Sun Storage 2500-M2 Drives SPARC Product Line Update ZFS RAID Calculator v6 What ships with ODA X3-2? Tech Article: Oracle Multitenant on SPARC Servers and Oracle Solaris New release of Sun Rack II capacity calculator available Announcing: Oracle Solaris Cluster Product Bulletin, September 2013 Learning & events Planned TechCasts Quarterly Partner Update Live Webcast: Simplify and Accelerate Oracle Database deployment with Oracle VM Templates Join us for OTN's Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence. Learn from OOW 2013 what is going on in Virtualization How to Implementing Early Arriving Facts in ODI, Part I and Part II: Proof of Concept Overview Multi-Factor Authentication in Oracle WebLogic Using multi-factor authentication to protect web applications deployed on Oracle WebLogic. If Virtualization Is Free, It Can't Be Any Good—Right? Looking beyond System/HW SOA and User Interfaces Overcoming the challenges to developing user interfaces in a service oriented References Vodafone Romania Improves Business Agility and Customer Satisfaction, with 10x Faster Business Intelligence Delivery and 12x Faster Processing Emirates Integrated Telecommunications Captures 47% Market Share in a Competitive Market, Thanks to 24/7 Availability Home Credit and Finance Bank Accelerates Getting New Banking Products to Market Extra A Conversation with Java Champion Johan Vos You can find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below. URL: http://launch.oracle.com/ PIN: eSTEP_2011 Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab.

    Read the article

  • High CPU load for 1:30 minutes when mounting ext4-raid partition

    - by sirion
    I have a raid 5 (software) with 5x2TB drives. I encrypted the raid with cryptsetup and put an ext4-partition on top. In the beginning opening and mounting the raid took less than 10 seconds, now (for a few weeks) mounting alone takes 1:30 minutes and the cpu stays around 93% the whole time: The output of "time sudo mount /dev/mapper/8000 /media/8000" is: real 1m31.952s user 0m0.008s sys 1m25.229s At the same time only one line is added to /var/log/syslog: kernel: [ 2240.921381] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) My Ubuntu-version is "12.04.1 LTS" and no updates are pending. I checked the partition with fsck, but it says that all is ok. The "cryptsetup luksOpen" command only takes a few seconds. I also tried changing the raid-bitmap (as it was suggested in some forum) but it did not change the behaviour. sudo mdadm --grow /dev/md0 -b internal and sudo mdadm --grow /dev/md0 -b none I had the idea that it might be the hardware being slow, but a read test with "sudo hdparm -t /dev/md0" spit out values between 62 and 159 MB/sec: Timing buffered disk reads: 382 MB in 3.00 seconds = 127.14 MB/sec Timing buffered disk reads: 482 MB in 3.02 seconds = 159.62 MB/sec Timing buffered disk reads: 190 MB in 3.03 seconds = 62.65 MB/sec Timing buffered disk reads: 474 MB in 3.02 seconds = 157.12 MB/sec Although I think it is strange that the read rate jumps by more than 100% - could that mean something? The speed test when reading from the mapped (decrypted) device shows similar behavior, although it is of course much slower. "sudo hdparm -t /dev/mapper/8000": Timing buffered disk reads: 56 MB in 3.02 seconds = 18.54 MB/sec Timing buffered disk reads: 122 MB in 3.09 seconds = 39.43 MB/sec Timing buffered disk reads: 134 MB in 3.02 seconds = 44.35 MB/sec The output of a verbose mount "mount -vvv /dev/mapper/8000 /media/8000" does not help much: mount: fstab path: "/etc/fstab" mount: mtab path: "/etc/mtab" mount: lock path: "/etc/mtab~" mount: temp path: "/etc/mtab.tmp" mount: UID: 0 mount: eUID: 0 mount: spec: "/dev/mapper/8000" mount: node: "/media/8000" mount: types: "(null)" mount: opts: "(null)" mount: you didn't specify a filesystem type for /dev/mapper/8000 I will try type ext4 mount: mount(2) syscall: source: "/dev/mapper/8000", target: "/media/8000", filesystemtype: "ext4", mountflags: -1058209792, data: (null) Any idea where I could find additional information on why mounting takes so long, or what additional tests I could run?

    Read the article

  • What You Said: Staying Productive While Working from home

    - by Jason Fitzpatrick
    Earlier this week we asked you to share your telecommuting/work-from-home productivity tips. Now we’re back with a tips and tricks roundup; read on to see how your fellow readers stay focused at home. By far and away the most common technique deployed as carefully isolating work from home life. Carol writes: I love working from home and have done so for 6 years now. I have a routine just as if I was going to an office, except my commute is 12 steps. I get ready for work, grab my purse and smart phone and go to up the steps to my office. I maintain a separate phone line and voice mail for work that I cannot answer from anywhere but my work desk. I use call forwarding when I travel so only my office phone number is published. I have VOIP phone service so I can forward calls from the internet if I forget, or need to change where the phone is forwarded. I do have a wired and wireless head set so I can go get a cold drink if on one of those long boring conference calls. I plan my ‘get off from work’ time and try to stick to it, as with any job some days I am late getting off, but it all works out. I make sure my office is for work only, any other computer play time is in a different part of the house on different computer. My office has laptop, dock, couple of monitors, multipurpose printer, fax, scanner, file cabinets – just like the office at a company. I just also happen to have a couple of golden retrievers that come to work with me and usually lay quietly until 5, and yes they know it is 5pm sometimes before I do. For me, one of the biggest concerns when working from home is not being unproductive, but the danger of never stopping work. You could keep going and going because let’s face it – the company will let you do it, so I set myself up to prevent that and maintain a separateness. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

    Read the article

  • Upgrading Oracle Enterprise Manager: 12c to 12c Release 2

    - by jorge_neidisch
    1 - Download the OEM 12c R2. It can be downloaded here: http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html  Note: it is a set of three huge zips. 2 - Unzip the archives 3 - Create a directory (as the oem-owner user) where the upgraded Middleware should be installed. For instance: $ mkdir /u01/app/oracle/Middleware12cR2 4 - Back up OMS (Middleware home and inventory), Management Repository and Software Library. http://docs.oracle.com/cd/E24628_01/doc.121/e24473/ha_backup_recover.htm#EMADM10740 5 - Ensure that the Management tables don't have snapshots:  SQL> select master , log_table from all_mview_logs where log_owner='<EM_REPOS_USER>If there are snapshots drop them:  SQL> Drop snapshot log on <master> 6 - Copy emkey  from existing OMS:  $ <OMS_HOME>/bin/emctl config emkey -copy_to_repos [-sysman_pwd <sysman_pwd>]To verify whether the emkey is copied, run the following command: $ <OMS_HOME>/bin/emctl status emkeyIf the emkey is copied, then you will see the following message:The EMKey  is configured properly, but is not secure.Secure the EMKey by running "emctl config emkey -remove_from_repos". 7 - Stop the OMS and the Agent $ <OMS_HOME>/bin/emctl stop oms $ <AGENT_HOME>/bin/emctl stop agent 8 - from the unzipped directory, run $ ./runInstaller 8a - Follow the wizard: Email / MOS; Software Updates: disable or leave empty. 8b - Follow the wizard:  Installation type: Upgrade -> One System Upgrade. 8c - Installation Details: Middleware home location: enter the directory created in step 3. 8d - Enter the DB Connections Details. Credentials for SYS and SYSMAN. 8e - Dialog comes: Stop the Job Gathering: click 'Yes'. 8f- Warning comes: click 'OK'. 8g - Select the plugins to deploy along with the upgrade process 8h- Extend Weblogic: enter the password (recommended, the same password for the SYSMAN user). A new directory will be created, recommended: /u01/app/oracle/Middleware12cR2/gc_inst 8i - Let the upgrade proceed by clicking 'Install'. 8j - Run the following script (as root) and finish the 'installation':  $ /u01/app/oracle/Middleware12R2/oms/allroot.sh 9 - Turn on the Agent:  $ <AGENT_HOME>/bin/emctl start agent  Note that the $AGENT_HOME might be located in the old Middleware directory:  $ /u01/app/oracle/Middleware/agent/agent_inst/bin/emctl start agent 10 - go to the EM UI. Select the WebLogic Target and choose the option "Refresh WebLogic Domain" from the menu. 11 - Update the Agents: Setup -> Manage Cloud Control -> Upgrade Agents -> Add (+) Note that the agents may take long to show up. ... and that's it! Or that should be it !

    Read the article

  • Help writing server script to ban IP's from a list

    - by Chev_603
    I have a VPS that I use as an openvpn and web server. For some reason, my apache log files are filled with thousands of these hack attempts: "POST /xmlrpc.php HTTP/1.0" 404 395 These attack attempts fill up 90% of my logs. I think it's a WordPress vulnerability they're looking for. Obviously they are not successful (I don't even have Wordpress on my server), but it's annoying and probably resource consuming as well. I am trying to write a bash script that will do the following: Search the apache logs and grab the offending IP's (even if they try it once), Sort them into a list with each unique IP on a seperate line, And then block them using the IP table rules. I am a bash newb, and so far my script does everything except Step 3. I can manually block the IP's, but that's tedious and besides, this is Linux and it's perfectly capable of doing it for me. I also want the script to be customizable so that I (or anyone else who wants to use it) can change the variables to suit whatever situation I/they may deal with in the future. Here is the script so far: #!/bin/bash ##IP LIST GENERATOR ##Author Chev Young ##Script to search Apache logs and list IP's based on custom filters ## ##Define our variables: DIRECT=~/Script ##Location of script&where to put results/temp files LOGFILE=/var/log/apache2/access.log ## Logfile to search for offenders TEMPLIST=xml_temp ## Temporary file name IP_LIST=ipstoban ## Name of results file FILTER1=xmlrpc ## What are we looking for? (Requests we want to ban) cd $DIRECT if [ ! -f $TEMPLIST ];then touch $TEMPLIST ##Create temp file fi cat $LOGFILE | grep $FILTER1 >> $DIRECT/$TEMPLIST ## Only interested in the IP's, so: sed -e 's/\([0-9]\+\.[0-9]\+\.[0-9]\+\.[0-9]\+\).*$/\1/' -e t -e d $DIRECT/$TEMPLIST | sort | uniq > $DIRECT/$IP_LIST rm $TEMPLIST ## Clean temp file echo "Done. Results located at $DIRECT/$IP_LIST" So I need help with the next part of the script, which should ban the IP's (incoming and perhaps outgoing too) from the resulting $IP_LIST file. I don't care if it utilizes UFW or IPTables directly, as long as it bans the IP's. I'd probably run it as a cron task. What I'm having trouble with is understanding how to use line of the result file as a seperate variable to do something like: ufw deny $IP1 $IP2 $IP3, ect Any ideas? Thanks.

    Read the article

  • Simulate 'Shock absorbtion' with tire rubber in PhysX (2.8.x)

    - by Mungoid
    This is a kinda tricky question and I fear there is no easy enough solution, but I figured I'd hit SE up before giving up on it and just doing what I can. A machine I am working on has no suspension or shocks or springs of any sort in the real machine, so you would think that when it drives over bumps, it would shake like crazy but because its tires (6 of them) are quite large they seem to absorb a lot of shock from the bumps. Part of this is because the machine is around 30k lbs and it just smashes/compresses any bumps in the ground down (This is another issue im still working on) and the other part is that the tires seem to have a lot of flex to them with a lot of air as well. So my current task is to simulate shock absorption in physx without visibly separating the tires from the spindle/axle.. I have been messing with all kinds of NxMaterial, NxSpring, Joints, etc. and have had no luck getting this to work. The main problem is that the spindle attached to the tire is directly in the center and the axle is basically solidly attached to the chassis, so if i give it any spring or suspension travel, that spindle on the tires will move upwards or downwards, looking very odd because now its not any longer in the center of the tire. I tried giving it a higher restitution but that just makes it bouncy without any shock absorption. Another avenue I am messing with is to actively smooth the terrain in front of the tires so that before it hits a bumpy patch, that patch is smoothed and it doesn't bounce. The only issue with this is that it is pretty expensive to do with 6 tires, high tesselation of the terrain and other complex things going on at the same time in this simulation. I am still working on this but I am hoping to mix and match a few different aspects to get the best possible outcome. This is a bit of a complex issue so I'm not expecting anyone to have a definitive answer, just hoping someone may think of something I haven't =-) -Side note: Yes i know PhysX 2.8.x is quite outdated but we have to stick with it for this implementation. We are in the process of going to another physics engine but it is out of scope to apply that engine to this project.

    Read the article

  • Rebuilding a Mac Mini (early 2009)

    - by Kelly Jones
    This weekend I decided to rebuild the family’s Mac Mini.  It’s the early 2009 model and I hadn’t done it since we got it in March of 2009.  Even worse, I had done the import data step (or whatever Apple calls it) which brought over all of the data files and apps from our previous Mac.  AND that install goes back to before 2005, as far as I can remember.  SO, to say that “cruft” had built up in the operating system, is probably a bit of an understatement. The rebuild went pretty smoothly, especially since I had a couple of spare hard drives.  I hooked up a spare USB drive and formatted it for use with the Mac.  I then used Carbon Copy to clone the internal hard drive onto the USB drive.  (Carbon Copy is a great little app that I used several years ago and I was happy to see it was not only still around, but updated as well.) Once I had my backup, I shut down the Mac and replaced the internal hard drive.  I had purchased the hard drive last fall to use with my work laptop, but I got a new work laptop (with awesome dual SSDs) so I wasn’t using it anymore.  The replacement drive (Seagate Momentus 7200.4 ST9500420AS 500GB 7200 RPM 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive) has more than double the original’s capacity and is also faster.  I’ll have to keep an eye on the temperature, since that 7200 drive will run hotter. Opening the Mac Mini is not for the easily intimidated!  That cool little case is quite the pain to open.  Luckily, OWC put a video together here.  After replacing the drive, I then installed a clean copy of OS 10.5 using the DVDs that came with the Mac.  After the OS, it was time to reinstall the apps.  I downloaded some of the freeware, just to make sure I had the latest versions.  For the rest, I just copied from the backup cloned drive to the new drive.  (I love the way most Mac apps are written – with almost everything contained within a “package” that I can just copy from one drive to another.  MUCH better than the Windows way of using shared DLLs and the registry to store critical pieces that the app needs in order to run!) The whole process took longer than I would have preferred, but it was long overdue.  It definitely “feels” faster, especially boot time and application launches.

    Read the article

  • "You are missing the following 32-bit libraries, and Steam may not run: libc.so.6" The common fixes don't work,

    - by M_Steam_User
    So I know this is a problem that has been asked around a lot, but I've tried a bunch of solutions with no success. I'm running Ubuntu 12.04 (64 bit), and I just installed it yesterday. This is my first time working with linux. The error is: You are missing the following 32-bit libraries, and Steam may not run: libc.so.6 Things I've tried. First, I had downloaded from the steam website. I uninstalled it, and tried again from the ubuntu software centre. sudo apt-get update sudo apt-get install ia32-libs sudo apt-get upgrade This installed a bunch of the 32 bit libraries, but did not fix the issue. This seems like the major fix for most people. The direct approach of sudo apt-get install libc.so.6 returns this: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libc.so.6 E: Couldn't find any package by regex 'libc.so.6' I guess libc.so.6 isn't a package, just a single file or something? I also tried gksudo gedit /etc/ld.so.conf.d/steam.conf Added these two lines, those the second one was all ready in the file, but copied over: /usr/lib32 /usr/lib/i386-linux-gnu/mesa Then executed: sudo ldconfig But nothing seemed to happen, steam still doesn't work. So, I feel like it is more likely that I have the library and steam isn't looking in the right place. One thing I've seen is people usually reference /usr/local/lib/ for your library locations. However, I can't find where to cd into /usr/, it isn't in my home folder. If /usr/ is the home folder, there is only a /.local folder which only has /share, no lib anywhere. Sorry for my linux ignorance. I appreciate any help, I honestly have no idea how to confirm I have the library and point steam to it, or if that is even the right thing to do. Edit: Tried this, not entirely sure what it means ~$ ls -l /lib32/libc* -rwxr-xr-x 1 root root 1721832 Sep 30 11:06 /lib32/libc-2.15.so -rw-r--r-- 1 root root 185928 Sep 30 11:06 /lib32/libcidn-2.15.so lrwxrwxrwx 1 root root 15 Sep 30 11:06 /lib32/libcidn.so.1 -> libcidn-2.15.so -rw-r--r-- 1 root root 34316 Sep 30 11:06 /lib32/libcrypt-2.15.so lrwxrwxrwx 1 root root 16 Sep 30 11:06 /lib32/libcrypt.so.1 -> libcrypt-2.15.so lrwxrwxrwx 1 root root 12 Sep 30 11:06 /lib32/libc.so.6 -> libc-2.15.so

    Read the article

  • Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

    - by IcarusNM
    I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

    Read the article

  • WiFi on Ubuntu 12.04 custom: downloading unbearably slow

    - by Mark
    iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

    Read the article

  • dual boot ubuntu installation mishap

    - by user590849
    I have Windows 7 pc ,where i had 2 partitions, a c drive for my system files and a d drive for my data. I decided to install ubuntu 11.10 a couple of days ago and thought of install it in a separate partition of its own. So i made a separate Linux partition of 30GB. I downloaded ubuntu on my usb stick and installed. During the installation process i was asked where to install ubuntu so i opened up a screen that was similar to this one There were six partitions present ( I had made only 3 partition via windows). Their names were totally different from the ones that i had given in windows. So i selected a drive which had the same size as my Linux partition that i had made in windows ( no other partition had the same size). I clicked on install now and got an error message saying that "There was no root folder set". I set the newly made partition as my root folder and clicked install now. Now out of the 6 partitions that were created 3 were logical ( i had only created 3 partitions in windows). As soon as i clicked install now, the system asked me where i wanted to put my "swap space". I selected one of the logical drives and hit install. Ubuntu successfully installed on my system and at the end it asked me to reboot. I did and got the following error message: "missing operating system". I was shocked. I tried my windows recovery disk ( that i had gotten when i had purchased my laptop) and there i went into startup repair. In the startup repair option i was not able to locate windows. The system asked me to click the "Load drivers" button to load the drivers to my harddrive where windows was installed, but i could not locate any drivers to my harddrive. I tried this several times but to no success. I panicked and installed ubuntu, now this time click "ok" at every step( not worrying about the partition and all). The os installed correctly and i am now able to access my harddrive. NO data within the c drive is lost. All the windows system files are intact. I wish to recover my windows installation. How do i go about it? Thank you in advance. I do not want to format my computer and install windows again.

    Read the article

  • Need Help with partitions and such Dual Booting 13.10 w/ windows 7

    - by Aymax
    so I've spent the past couple days freaking out about this and looking for answers, and I decided to resort to asking on forums. probably should have before I wasted 2 entire days. so I am trying to DUAL-INSTALL Ubuntu 13.10 with my x64 Windows 7 home premium computer. I have 6 gb of ram, 1TB hard drive, and a 3.3GHZ dual core processer (just in case it matters). I've managed to figure some things out. I've burned the ubuntu files onto a DVD, and I have been able to successfully run it off the disk. I also shrunk my Windows partition by 120Gb and partitioned that for Ubuntu (all using the windows Disk Manager). Problems: When I turn my computer on with the DVD in the tray, the computer cant find windows. it flashes a screen real quick that says something about not being able to find an operating system, and then goes to "grub" and asks what i want to do with Ubuntu. this scares me, because I don't know if that means that I will not be able to boot windows if I install Ubuntu. The Ubuntu 13.10 installer does not detect my Windows operating system. I only have the options to Erase everything on my drive, or "something else." I choose that, which brings me to 3 I don't understand the partition table. I have no idea which drive im selecting to install stuff on, much less which one to select. I tried to tell by the amount of memory partitioned off, but none of the numbers seem to be accurate. Plus, all the names are dev/sda(#). I know Ubuntu knows the name of my partition, because on the sidebars it shows the names of the different drives, including the partition I made; so why don't they use the names? I have no idea what I'm going to be erasing. I've read that I should know which is which by the file system type, but they are all NTFS, including the one I made. my only other option was FAT, none for EXT2 or any of that like people said to do. My main concerns are that of accidentally erasing windows or not being able to access windows. any feasible solution is helpful, weather it helps me with the install or to make Ubuntu see windows. I realize this question has been asked much, but i have found no feasible answers so far. I am relatively new to this, and have never installed an operating system before, so I do not know most of the jargon. please keep it relatively simple, please. I am not a programmer. Thanks.

    Read the article

  • Laptop freezes and seems to crash, but continues working after waiting for a few minutes [closed]

    - by Corwin
    I've had this old notebook laying around and because i was missing a second machine (My wife usually steals the first ;) ) I considered installing Linux. As a php developer I work with Linux servers (usually fedora) on a daily basis and because its an older machine that I want to use for development, linux seemed the best option. Speedwise I expected a good experience, better than Windows 7 on the same machine. The results where terrible. I tried ubuntu 12.04. The shell never got past showing the background. The system doesn't freeze since the mouse still works and I can use ctrl+alt+f2 etc to enter terminal mode. I expected hardware problems en even exchanged the harddisk en Ram memory. No luck though, so I started over and tried 11.10 Same results so I tried 10.04.4 which did install properly. Not sure if unity was the problem, but it seems likely. But then I tried simply things like surfing on the net, the system frooze and I thought it crashed so after a few minutes I pulled the plug and rebooted. But it happened again and I waited. After a few minutes the system came back to life like nothing happened. Long story short. Besides the fact that the entire interface is very sluggish, any and all graphical functions freezes the system. The more elaborate the animation would be, the longer it freezes. I switch chromium from window to fullscreenmode and had to wait 15 minutes to continue. I don't see the animation that's probably supposed to be in between. It just freezes and then after unfreezing its fullscreen. I don't think its a bug. I suspect the problem is with my graphics card. Like I said, its and old system. So old that I can't even find the original Ati drivers anywere. (I'll post the details of my system at the end of my post) I'm at a loss as to what to do next. I tried other Distro's. So far only dreamlinux works normally. Linux Mint won't start as a live CD. I think I simply need a driver update but I can't find them anywhere. Does anyone have the same experience ? Maybe even someone who has or had the same notebook running Ubuntu at some point ? Anyway, here are the specs: http://www.nec-driver.com/nec-driver/NEC-Versa-P550---FP550-Driver_421.html

    Read the article

  • 11g ???:Active Data Guard

    - by JaneZhang(???)
    ?Oracle 11g??,????(physical Standby)???redo???,???????,???mount??11g??,???redo???,????????read-only??,????Active Data Guard ???Active Data Guard,?????????????????,??????????????   Active Data Guard???????????,??,????????????,????????,????redo??,????????????,??????????? Oracle Active Data Guard ?Oracle Database Enterprise Edition?????,??????????????   ????Active Data Guard, ??????? read-only ????,???? ALTER DATABASE RECOVER MANAGED STANDBY DATABASE????????????:??????COMPATIBLE ????????11.0.0?  ???????Active Data Guard,???V$DATABASE????"READ ONLY WITH APPLY':      SQL> SELECT open_mode FROM V$DATABASE;      OPEN_MODE      --------------------      READ ONLY WITH APPLY   ????????????,???????real-time apply:   SQL>ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE; ?????????read-only????????:    • Issue SELECT statements, including queries that require multiple sorts that leverage TEMP segments    • Use ALTER SESSION and ALTER SYSTEM statements    • Use SET ROLE    • Call stored procedures    • Use database links (dblinks) to write to remote databases    • Use stored procedures to call remote procedures via dblinks    • Use SET TRANSACTION READ ONLY for transaction level read consistency    • Issue complex queries (such as grouping SET queries and WITH CLAUSE queries) ??????????read-only????????:    • Any DMLs (excluding simple SELECT statements) or DDLs    • Query accessing local sequences    • DMLs to local temporary tables    ?????Active Data Guard ??: • ????????????????? • ???Oracle Real Application Clusters (Oracle RAC) ,?????? • RAC???RAC??    Oracle Data Guard ?????,,????????:    * ?????????????????:     http://docs.oracle.com/cd/B28359_01/server.111/b28294/create_ps.htm   * ???Oracle Real Application Clusters (Oracle RAC) ,??????:     http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf   * RAC ???RAC ??:     http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimaryracphysicalsta-131940.pdf  ??Active Data Guard???????,?????:    http://www.oracle.com/technetwork/database/features/availability/maa-wp-11gr1-activedataguard-1-128199.pdf     ??Oracle Maximum Availability Architecture Best Practices?????,???:   http://www.oracle.com/goto/maa

    Read the article

  • chkdsk "An unspecified error occurred (696e647863686b2e e19)"

    - by Ex Umbris
    System is Win7x64 Pro on Core i7-920, 12GB I'm experiencing some system flakiness and am trying to pin down the cause. SMART shows zero bad sectors, zero pending reallocations on all drives Memory tests show no problems. Chkdsk fails in various different ways: When run from a normal command line (no /f option) it gets to 63% and then hangs When run on boot (autocheck) it hangs immediately on starting. Actually, the countdown timer (Press any key to skip chkdsk) gets to 1 second and the system hangs. When run from the F8 "Repair System" option (the Win7 "recovery console"), with /f, it runs to about 63% (end of stage 2) and then fails as follows:   Volume label is OS. CHKDSK is verifying files (stage 1 of 3)... 5068288 file records processed. File verification completed. 308 large file records processed. 0 bad file records processed. 2 EA records processed. 77 reparse records processed. CHKDSK is verifying indexes (stage 2 of 3)... 63 percent complete. (6078872 of 7562028 index entries processed) An unspecified error occurred (696e647863686b2e e19). Unable to obtain a handle to the event log. Googling and searching on Technet for the error code and "Unable to obtain a handle to the event log" both turn up nothing useful. Anybody have any info on what the problem is?

    Read the article

  • SD Card reader not working on Sony Vaio

    - by TessellatingHeckler
    This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

    Read the article

  • How to make my SanDisk Cruzer Blade 4GB disk back to normal?

    - by Jack
    Currently, my SanDisk Cruzer Blade 4GB have become a 64MB Firebird RAW flash drive (thumb drive). I don't know why it become like this but when I plug it into a PC, it suddenly transform itself to become a 64MB flash drive. (From 4 GB to 64 MB, that is a huge change!) I read the following articles: http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/Cruzer-Blade-will-not-format/td-p/214932 http://forums.whirlpool.net.au/archive/1691847 http://forum.hddguru.com/sandiskfirebird-64mb-t23539.html and notice that their solutions does not work at all. Some of their solution is as follows: Using the HP USB Disk Storage Format Tool (http://files.extremeoverclocking.com/file.php?f=1970), which did not work for me as it could not format. Using the h2testw to see if it is genuine, which did not work for me because it is a RAW partition. Return to the vendor, which I doubt since the product only have 1 year warranty and it has expired. I also notice that the flash drive is very fragile as after a few use, the flash drive have become something like the following: (The upper cover of the USB connector was broken or torn) So, wondering if someone have any good solution to fix it back so that at least I can retrieve my data on the fragile thumb drive.

    Read the article

  • Dell VRTX - slow cluster shared storage

    - by NorbyTheGeek
    I have a brand new Dell VRTX box set up as a Failover Cluster running HA Hyper-V virtual machines. This is my first time setting up clustering, and my first time with one of these boxes, so I'm sure I've missed something. The virtual machines are experiencing high disk latency and bad performance when accessing their VHD(x) files located on a Cluster Shared Volume. The VRTX has 10 x 900 GB 10K SAS drives in RAID 6 configuration, and the VRTX has the redundant Shared PERC 8 controllers. Both blades have full access to the virtual disks. There are two M520 blades installed, each with 128 GB RAM. MPIO is configured for the PERC 8 controllers. Operating system on the blades is Server 2012 (NOT R2). The RAID 6 array is split into a small (8 GB) volume for cluster quorum witness and a large (6.5 TB) volume for a Cluster Shared Volume (mounted on the nodes as C:\ClusterStorage\Volume1) An example of slow disk access: logging into a Server 2012 VM and having Server Manager come up automatically. Disk access goes to 100%, with write speeds at 20 MB or so, read speeds of 500 KB or so, and Average Response Time of over 1000 ms, sometimes spiking at 4000-5000 ms or so. It's the latency that really worries me. Is there something specific I should look at in my configuration? It doesn't seem to matter whether I use VHD or VHDX, dynamic or static.

    Read the article

  • Motherboard HDDPWR1 connector

    - by Eric Leschinski
    I need help identifying the name of a connector. I have a Gateway DX4870-UB318 computer, I opened the case and wanted to attach another hard drive, but to my surprise one existing SATA hard drive was connected to the motherboard with this connector: And here is the spot on the Motherboard where the power was supplied. What is the name of this adapter and where can I get another one? Clues: This computer was bought new October 2013 from best buy, box number: DX4870-UB318. The gateway folks won't divulge the type of motherboard it has nor give specs on it. On the wire itself is an identification code: H.35090NJ01-000 Next to the connector on the motherboard it says: HDDPWR1 and the second one says HDDPWR2. This cable has two SATA power connectors and one mystery connector. The power supply has no molex power cables and no SATA power connectors! This is the most bizarre hard drive power system I've seen. I guess the motherboard folks are trying to remove the burden for desktop power supplies to provide adapters (molex, SATA, other) to CD's and hard drives. Can someone put a name on that white flat 6 pin HDD Power Connector? My Solution I can buy a "SATA Power Y Splitter Cable" to provide more spaces to power sata devices.

    Read the article

  • DriveImage XML fails with a Windows Volume Shadow Service Error

    - by Ssvarc
    I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

    Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >