Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 247/301 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• New router messed up server 2003 setup...

  - by Aceth

  Hey, We were sent a new 2wire router today configured it as best we can to match the old bt voyager. We've also got X static IP's. We've manage to get our webserver on one of the new IP's public facing. then we use a hardware firewall which is in a DMZ again with a different static IP. This firewall then is our gateway for our internal LAN. with a few servers etc. The problem we're having is only our PDC (primary Domain controller which has exchange 2003 on) can't ping externally even an external IP. We've connected laptops to the 2wire router and obtain a private ip 192.168.1.X and it works fine can ping etc. our other servers with an internal ip behind the firewall can ping out fine. We've connected to the firewalls logging console and the pings from the server are allowed through so its fine there. The server in question is a Windows server 2003 R2 Enterprise SP2 + Exchange 2003 Server doesn't have firewall turned on. it has static private IP .. gateway is pointing to the right one External Static IP is routing fine inwards We've ran out of ideas .. help??

  Read the article

• "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

  - by Luke

  First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

  Read the article

• Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

  - by Sid

  I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

  Read the article

• How can find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• Inter-VLAN Malicious Code Scanning

  - by Jackthedog

  I am trying to find an inbuilt solution on a Cisco Catayst 3750X Switch to scan all traffic routed from one VLAN to another for malicious code. The situation is that we currently have a development environment which is currently being redesigned to upgrade the network infrastructure to use the 3750X switches to manage server and workstation connectivity as well as inter-VLAN routing. We also have another system that is responsible for taking the builds created on the development environment and imaging various HDDs. Because these are two separate systems, we have a requirement in the workplace to anti-virus scan any data transferred between these systems. This is done by copying the data from the originating system to external USB HDD, scanning in a standalone workstation and then copying the data on to the receiving system. As you can imagine this is extremely tedious and impractical most of the time... (I don't make the rules). Anyway, with this redesign going on, we would like to join the imaging system to the network infrastructure of the development system, keeping separation by the use of VLANs and restricting traffic by using ACLs. As we still have the requirement to scan all traffic I would like to configure some sort of malicious code scanning when ever traffic is routed between these VLANs. I am aware I could install a separate in-line IPS/IDS device, however both systems will be using multiple ports on the switch (obviously), and we won't be able to put a device on each port. I would would prefer not to add additional hardware if the 3750x switch is capable of doing the job. Is anyone aware of any Cisco solution that I could use here, that ideally can be incorporated into the 3750x switch? Thanks in advance.

  Read the article

• Swapping Function (Fn) and Control (Ctrl) Keys on Lenovo ThinkPad W500

  - by Howiecamp

  I'd like to swap the Fn and Ctrl keys on my ThinkPad W500 (like many others! See: How can I switch the function and control keys on my laptop? and Intercepting the Fn key on laptops) Numerous folks indicate that Windows doesn't register the Fn key as a keypress but using Mihov ASCII Master 2.0, that gives the ASCII value of a keypress, I see the Fn key returning FF (perhaps FF in this case means 'not registered'). I also see that keys like Ctrl register with one ASCII code when pressed alone and another when pressed in combo with another key. Fn will only register when pressed alone, so Windows definitely isn't seeing the combo. This took a solution like AutoHotKey off the table. I ran KeyTweak (which shows you the hardware scan codes of a keypress and the Fn key registerd as 57443). Using this program I remapped Fn to the Ctrl key; this worked perfectly. However, I suspect that because of the issue in #1, the combo of, for example, Fn + C did not execute a copy. Short of retraining my pinky I'm actually considering removing the keyboard and resoldering the connections to swap those keys. I'd love to get some input as to the root technical issue(s) and possible solutions here.

  Read the article

• HP Officejet 4500 G510n-z Not Showing up in Remote Desktop (Terminal Services)

  - by Greg_the_Ant

  I installed this printer on a windows XP machine. First using the wireless option, and later using USB. In both cases when I connect to my other computer (also Windows XP) via terminal services and check printers in the local resources tab it does not show up on the remote session. I used to have a Samsung connected to my local computer over USB and and that worked fine over terminal services. Things I tried so far: I did read this page and installed the software fix on both computers: (Printers that use ports that do not begin with...) I installed the minimum HP software install on the remote computer and that didn't help either. I also tried running the add new printer wizard on the remote computer: I selected "local printer attached to this computer" and did not check the "automatically.." option. On the next page of the wizard I can select an option for "use the following port". I see options for TS001 through TS009 there. I'm assuming those are coming from the local machine. I tried clicking each one and then checking "have disk" and pointing it to C:\3be8dc611b11322e8ddf8a67\i386\msxpsdrv.inf 1 but for every single TS00.. port it says "The specified location does not contain information about your hardware." Any help would be greatly appreciated. I'm pretty stuck at this point. 1 C:\3be8dc611b11322e8ddf8a67 is the folder I extracted the HP driver software to after I downloaded it.

  Read the article

• Cisco Multi-DMZ firewall

  - by BParker

  I need to find a firewall that will give me 1 LAN port, and 5-7 DMZ ports. I have a requirement to replace some FreeBSD systems that are used to run some testing equipment. It is essential that the DMZ ports cannot communicate with each other, but the LAN port can communicate with everyone. That way a user on the LAN can connect to the test systems, but the test systems are isolated entirely and cannot interfere with each other. One of the DMZ's will be connected to a VMWare ESXi server, one to a standard server, and the rest to various types of equipment. The lan port will be connected to the corporate LAN switch. Sorry if i am a little vague, I am just trying to work all this out myself! Currently we have a FreeBSD configured, but the quad port NIC's are pretty expensive, and the PC itself is old, so i would prefer to replace it with a dedicate piece of kit which can do the same job, but more reliably! These test rigs are used all over the place, and get moved quite often, so i am aiming for Cisco kit for ease of configuration and reliability of the hardware itself. Thanks

  Read the article

• What could cause a huge packet loss in Ubuntu 9.10, for both wired and wireless?

  - by xzenox

  I was previously using 9.04 fine (and in fact, I am posting this from my old 9.04 live cd). I tested the following install steps in a virtualbox vm prior to following the sames ones to upgrade my laptop: Download/burn ubuntu minimal cd (12mb one) Install ubuntu minimal sudo apt-get update sudo apt-get upgrade sudo apt-get ubuntu-desktop ubuntu-standard In the VM worked fine and I found myself with a working 9.10 ubuntu, network worked fine and I was able to test my backups and DropBox without a hitch (host was 9.04). When I followed the same steps on my laptop, everything worked up to after 9.10 being installed and working. As far as I can tell, everything besides eth0/wireless works. For some reason, I am unable to access the internet. Ping reports that over 99% of packets get lost (over an hour or so of pinging). This means for example that if I try hard enough, I can load a webpage but only at the cost of much patience... This happens both for a wired and wireless connection to my wrt310n (updated with latest firmware). At first I thought that it could be related to the ipv6 issues ppl have been experiencing however even after disabling ipv6 at the kernel level (through grub), I still get the issue. I do not think this is related to DNS issues or the likes since even when I ping my ISP's gateway IP, I have the same amount of packet loss. No DNS resolving should be required there. Access to my router works peachy with no packet loss there. I've tried different MTU values but to no avail. Note that this issue affects every web-enabled application: firefox, ping, synaptic, etc. The same hardware/router combo works with 9.04 but not with 9.10. In fact, when I did: sudo apt-get ubuntu-desktop ubuntu-standard after 9.10 minimal was installed, it downloaded over 400mb of packages without a hitch so my guess is that one of those packages either in ubuntu-desktop or ubuntu-standard is causing havok. Thoughts?

  Read the article

• Windows Server 2003 SBS domain in multiple sites

  - by E3 Group

  We have about 25 employees in our current office and are looking to open up another office in another capital city housing about 15 employees. In our current office, we are running a domain hosted by a 2003 SBS server and I've been tasked by the boss to expand our infrastructure to the new office in the cheapest way possible (cheapest way in the short run that is, because my boss doesn't think more than 6 months ahead). So I'm looking to get a second hand server and have it run Server 2003 Std with exchange server 2003. These are the things that it needs to do: Replicate shared folders that are hosted in the parent LAN. Deliver emails hosted in the parent Exchange Server Somehow link up with the parent domain controller and push the AD to the remote site I'm pretty sure 3 is impossible but the DC would be available if a VPN connection is present, right? On that note, would I be looking at hardware VPN connections? I'm not sure how to deploy the new site as this is my first time doing it and i'm making it especially difficult for myself, seeing as the AD and DC is on an SBS server. Would I first start by establishing a VPN connection and then joining the new server to the domain? Will things 'just work' if I install exchange onto the new server and point outlooks to it? and how would I be able to replicate shared folders?

  Read the article

• Best practices for settings for Oracle database creation

  - by Gary

  When installing an Oracle Database, what non-default settings would you normally apply (or consider applying) ? I'm not after hardware dependent setting (eg memory allocation) or file locations, but more general items. Similarly anything that is a particular requirement for a specific application rather than generally applicable isn't really useful. Do you separate out code/API schemas (PL/SQL owners) from data schemes (table owners) ? Do you use default or non-default roles, and if the latter, do you password protect the role ? I'm also interested in whether there's any places where you do a REVOKE of a GRANT that is installed by default. That may be version dependent as 11g seems more locked down for its default install. These are ones I used in a recent setup. I'd like to know whether I missed anything or where you disagree (and why). Database Parameters Auditing (AUDIT_TRAIL to DB and AUDIT_SYS_OPERATIONS to YES) DB_BLOCK_CHECKSUM and DB_BLOCK_CHECKING (both to FULL) GLOBAL_NAMES to true OPEN_LINKS to 0 (did not expect them to be used in this environment) Character set - AL32UTF8 Profiles I created an amended password verify function that used the apex dictionary table (FLOWS_030000.wwv_flow_dictionary$) as an extra check to prevent simple passwords. Developer logins CREATE PROFILE profile_dev LIMIT FAILED_LOGIN_ATTEMPTS 8 PASSWORD_LIFE_TIME 32 PASSWORD_REUSE_TIME 366 PASSWORD_REUSE_MAX 12 PASSWORD_LOCK_TIME 6 PASSWORD_GRACE_TIME 8 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME 1080 IDLE_TIME 180 LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Application login CREATE PROFILE profile_app LIMIT FAILED_LOGIN_ATTEMPTS 3 PASSWORD_LIFE_TIME 999 PASSWORD_REUSE_TIME 999 PASSWORD_REUSE_MAX 1 PASSWORD_LOCK_TIME 999 PASSWORD_GRACE_TIME 999 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME unlimited IDLE_TIME unlimited LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Privileges for a standard schema owner account CREATE CLUSTER CREATE TYPE CREATE TABLE CREATE VIEW CREATE PROCEDURE CREATE JOB CREATE MATERIALIZED VIEW CREATE SEQUENCE CREATE SYNONYM CREATE TRIGGER

  Read the article

• Least CPU intensive way of streaming your screen on windows?

  - by sinni800

  Hello, sometimes I like capturing my screen for others to see. Only thing: I am playing games while I do it. I have tried a few streaming solutions where Windows Media Encoder coupled with my own Windows server appealed to me most, because I can change resolutions, etc. I also tried ustream coupled with the Flash applet and the Adobe Flash Encoder recording a Camtasia source. Camtasia has the disadvantage though that it shows the green-and-black-alternating borders and can not be targeted fullscreen. I like how xfire does it. But it doesn't work with every game, many are simply not supported. A few thoughts about this: Is there a program which captures like Fraps or XFire (based on Direct3D and OpenGL outputs) and exposes the output to a DirectShow source filter? Which brings me to: Is there hardware accelerated capturing directly from the graphics card? Maybe including direct encoding with help from OpenCL? Modern graphic cards decode BluRay content directly for example. I should have a modern enough graphics processor for this to be possible (see below). If using Windows Media Encoder: Which are the least CPU intensive settings? Which codec? Is there a newer codec than Windows Media 9? Is it less CPU intensive? I only have 7, 8 and 9 inside the Encoder Could the performance be massively increased by having a Quad-Core CPU (see below)? Bandwidth is no problem up to 1000 to 1500 kbit/s (I have 2048). My Computer specs: Intel Core 2 Duo E8400 4 GB DDR2-800 Ram Ati Radeon HD5770 Using Windows 7 Professional

  Read the article

• ash scripting: space-containing variable refuses to be grepped

  - by Luci Sandor

  I am trying to run the script listed at http://talk.maemo.org/showthread.php?t=70866&page=2 on its intended hardware, a Nokia Linux phone running BusyBox ash. The script receives the name of WiFi network as a parameter, and tries to connect the phone to it. I suspect the script works, but my SSID, BU (802.1x), has space and parentheses in it. So when I type at the command prompt autoconnect.sh BU\ \(802.1x\) I get various errors. First, LIST=`iwconfig wlan0 | awk -F":" '/ESSID/{print $2}'` if [ $LIST = "\"$1\"" ]; then ...fails, even I am connected to the network. The error is not avoided by using single or double quotes instead of escaping characters at the command prompt. Second, if [ -z `iwlist wlan0 scan | grep -m 1 -o \"$1\"` ]; then echo SSID \"$1\" not found; shows that grep does not find the string, although the same grep, typed directly into the command prompt, does find 'BU (802.1x)'. How do I quote $1 in the two circumstances above so that it will work with my network SSID, containing spaces and parentheses? Thank you.

  Read the article

• How to eliminate the downtime when a dynamic IP address changes?

  - by xenon

  We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

  Read the article

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• Updating Dell PowerEdge firmware on Ubuntu?

  - by Shtééf

  The company I work for recently got hands on a batch of second hand PowerEdge SC1425 machines. We'd like to put these to good use. Our operating system of choice is Ubuntu Server 10.04 64-bit, which installs just peachy on this type of machine. Now I'd like to install the firmware updates from Dell, which are apparently marked as recommended. This includes the updates for the BIOS, the BMC, and possibly some other hardware. I find it incredibly difficult to locate the files on the Dell website, and install any of them on an Ubuntu system: I downloaded the file OM_6.2.0_SUU_A01.iso. I believe I've read that the SUU DVD should be able to update any recent PowerEdge. Is this correct? Is this the latest version? Besides the version number, does A01 have any meaning? Is this image bootable? (At the moment, I just nosed around with a loop device mount.) Running /bin/bash ./suu from the DVD, I get: # /bin/bash ./suu ./suu: line 262: ./java/linux/i386/bin/java: No such file or directory The file exists and is executable, though. But I cannot execute it directly from the shell either.

  Read the article

• Windows XP mounting USB drive to same letter as previously mapped network drive

  - by GAThrawn

  Why does Windows always mount a USB drive as the next drive letter after the last physical drive, even when that letter is already taken by a mapped drive, and is there any way to improve this behaviour? What happens is I tend to use a few different flash drives on my PC, as well as having both a Blackberry and a personal phone that mount as USB drives when I plug them in to charge. Being on a corporate PC I also have a number of mapped network drives (some set by login script, some set as persistent mappings in my profile). When I first login I'll have drive letters like this: C: - Local Drive D: - DVD Drive G: - Login script mapped drive J: - Login script mapped drive When I plug the Blackberry in it'll mount two drives (one for onboard storage, one for the SD card) as E: and F:. If I then plug in another USB drive it will mount as G:, even though that's already taken by a network mapped drive. This leaves me with the following drives: C: - Local Drive D: - DVD Drive E: - USB drive (Blackberry) F: - USB drive (Blackberry) G: - Login script mapped drive [G: - USB drive - mounted but not visible in Explorer or command prompt] J: - Login script mapped drive I then have to go into Disk Management, find the new USB drive that's mounted to G: and re-assign it to another letter eg Z:, once this is done Auto-Play detects it and throws up its normal dialog, and its browseable in Explorer. While this is OK to do if you only use one or two USB drives and have admin access to your PC with your login account, its a total pain in the proverbial if you regularly use a whole load of different USB devices, and corporate policy means you have one account for your normal login (that only has User access to workstations), but have to use a different account for any privileged action. I realize that one possible reason for this is the difference between hardware which is mounted and assigned drive letters at the systen level, and mapped drives which are done at the user level. For USB devices that are already plugged in before login, then obviously they're mounted before Windows knows what network drives may be mapped. However if you plug the USB devices in after you're fully logged in and have drives mapped then Windows must know which letters are available?

  Read the article

• 32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

  - by Tejaswi Rana

  I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

  Read the article

• Can't install SB750 RAID drivers in Windows 7 for two additional storage drives

  - by jf46

  Mobo: ASUS M4A79XTD, 790X/SB750 OS: Windows 7 x64 I currently have SATA 1-4 set to RAID and SATA 5-6 set to IDE. I have an SSD connected to SATA5 with Windows 7 installed on it, and that works fine. I also have configured a RAID 1 array of two 1TB HDDs, connected to SATA 1 and 2. These don't show up in Windows, and I'm having trouble getting the RAID driver installed. I even tried booting from the Windows DVD and repairing or installing Windows, but when I navigated to the relevant .sys files on my motherboard's driver CD, Windows setup told me that the files in question weren't relevant to my hardware. To be clear: I'm not trying to install Windows on a RAID. I have Windows installed on a separate disk on a separate SATA controller. I just want to get the SB750 RAID drivers installed so that the Windows disk utility can see my RAID 1 array, which is composed of two other disks. Do I need to wipe my SSD and reinstall Windows to get the RAID driver installed? That seems kind of ridiculous, and given what I described above, I'm not even sure it would work. Any help or guidance would be appreciated - thanks! Edit: Also, I've copied the driver files from the mobo CD into system32 and rebooted, no luck. Then I changed HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV\Start from 3 to 0, and that didn't work either.

  Read the article

• Copying large files from USB devices to the internal hard drive fails on Mac OS

  - by John M. P. Knox

  I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

  Read the article

• How to change controller numbering/enumeration in Solaris 10?

  - by Jim

  After moving a Solaris 10 server to a new machine, the rpool disk is now c1t0d0. We have some third party applications hard coded for c0t0d0. How can I change the controller enumeration on this machine? There is no longer a c0. I've tried rebuilding the /etc/path_to_inst, but the instance numbers don't seem to match up with the controller numbers. Also, it's not clear if i86pc platforms use this file. I've tried devfsadm -C to clear the dangling links, but I'm not sure how to cause devfsadm to start numbering from 0 again (or force certain devices in the tree to a specific controller number). Next I am going to try to create the symlinks manually in /dev/dsk and rdsk to point to the correct /devices. I feel like I am going way off path here. Any suggestions? Thanks Update: This is on virtual ESXi hardware with an additional pass-through HBA. There is no controller 0 on the machine, that is for sure. devfsadm -C cleans up all the c0 device symlinks but keeps the already linked controllers at their current ids.

  Read the article

• What is the latest on Microsoft Expression Studio licensing?

  - by DanM

  In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

  Read the article

• Dropped connections between Linux Servers in Data Center

  - by Emil H

  I have a number of linux servers at a us-based datacenter. The servers were installed by the hosting company, and are running fedora core. We're experiencing problems with dropped connections. The issue seems to be that when we attempt to connect to one of the other servers after a period of inactivity, the first connection attempt will fail, and sometimes the second. However, after that the connection succeds and it works for a while. This happens for both mysql connections and raw socket connections, but only seems to occur when connecting to some of our servers. The confusing part is that it some of the servers for which we see different behaviors have identical hardware configuration and software. For example, it happens when connecting to a server called mysql2, but not for a server called mysql3. These servers were installed at the same time, but the same specifications. The problem can be reproduced somewhat reliably, but only after waiting fifteen minutes to half an hour. This makes it hard to diagnose, and even harder since I'm not really sure what to look for. I realize that connections sometimes failed, and that we should write our applications to compensate for this but these servers all in the same data center. Why would it matter if two servers haven't communicated for a while? Does anybody have an idea what might be causing this? Is it a server configuration problem or a network problem that I should contact the hosting company about. What do I tell them to look for? Unfortunately our experience has been that the support staff doesn't investigate problems in depth unless we give them detailed directions.

  Read the article

• Migrate Domain from Server 2008 R2 to Small Business Server 2011

  - by josecortesp

  I'm looking for some advice here, rather than the big how to do it I'm looking for what do to I have this home server, quad core and 4 GB of ram (I really can't afford more right now). With a Windows Serve 2008 R2 With ActiveDirectory and a Hyper-V-Virtual machine with SharePoint, TFS and a couple of more thigs. I have a least 10 remote users, all of them joined a Hamachi VPN (working great by the way). But I want to migrate that to a Small Business Server 2011 Standard. I tried to make a VM to join the domain and then promote that VM, back up it and then format the physical server, boot up the VM, Promote the Phisical and then erase the VM, but I can't do that because of SBS requiring a least 4 GB of ram to install (so I can't give all the 4 GB of physical ram to a VM). I was thinking in using a laptop (All the clients are laptop) as a temporal server, join the domain, promote it, then format the server and install SBS on the server and do all again. I really need some advice. Thanks in advance. BTW, I know that the software I'm using is kindda expensive, and I can't afford more hardware. I have access to MS downloads by a University partnership so I have all this software for free.

  Read the article

• Streaming to PS3 with NAS and built-in dlna server?

  - by philt

  With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >