Search Results

Search found 6602 results on 265 pages for 'fedora 14'.

Page 247/265 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• How do you setup the driver for a Philips based TV capture card?

  - by user8270

  Hi, I have a TV card that I have not managed to install with Ubuntu 10.10 i386. I have tried various topics in various forums and I could not install it. I hope you can help me to install it thank you. lspci 01:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) dmesg [10299.516344] saa7134 ALSA driver for DMA sound unloaded [11385.340661] Linux video capture interface: v2.00 [11385.384278] saa7130/34: v4l2 driver version 0.2.16 loaded [11385.384390] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [11385.384403] saa7130[0]: subsystem: 1131:0000, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [11385.384412] saa7130[0]: can't get MMIO memory @ 0x0 [11385.384431] saa7134: probe of 0000:01:07.0 failed with error -16 [11385.401174] saa7134 ALSA driver for DMA sound loaded [11385.401182] saa7134 ALSA: no saa7134 cards found [11477.797019] tvtime[12534]: segfault at 6b0 ip 0804cf64 sp bf928a4c error 4 in tvtime[8048000+76000] [11626.141821] tvtime[12549]: segfault at 6b0 ip 0804cf64 sp bfec357c error 4 in tvtime[8048000+76000] [12218.120632] saa7134 ALSA driver for DMA sound unloaded [12464.993061] Linux video capture interface: v2.00 [12465.028285] saa7130/34: v4l2 driver version 0.2.16 loaded [12465.028392] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [12465.028404] saa7134: <rant> [12465.028406] saa7134: Congratulations! Your TV card vendor saved a few [12465.028408] saa7134: cents for a eeprom, thus your pci board has no [12465.028411] saa7134: subsystem ID and I can't identify it automatically [12465.028414] saa7134: </rant> [12465.028416] saa7134: I feel better now. Ok, here are the good news: [12465.028418] saa7134: You can use the card=<nr> insmod option to specify [12465.028421] saa7134: which board do you have. The list: [12465.028428] saa7134: card=0 -> UNKNOWN/GENERIC [12465.028435] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001 [12465.028447] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138 [12465.028457] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138 [12465.028467] saa7134: card=4 -> EMPRESS 1131:6752 [12465.028475] saa7134: card=5 -> SKNet Monster TV 1131:4e85 [12465.028484] saa7134: card=6 -> Tevion MD 9717 [12465.028491] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01 [12465.028501] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142 [12465.028510] saa7134: card=9 -> Medion 5044 [12465.028517] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI [12465.028523] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143 [12465.028532] saa7134: card=12 -> Medion 7134 16be:0003 16be:5000 [12465.028542] saa7134: card=13 -> Typhoon TV+Radio 90031 [12465.028548] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b [12465.028557] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a [12465.028565] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840 [12465.028576] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133 [12465.028585] saa7134: card=18 -> BMK MPEX No Tuner [12465.028592] saa7134: card=19 -> Compro VideoMate TV 185b:c100 [12465.028600] saa7134: card=20 -> Matrox CronosPlus 102b:48d0 [12465.028608] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001 [12465.028617] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b [12465.028625] saa7134: card=23 -> BMK MPEX Tuner [12465.028632] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006 [12465.028640] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843 [12465.028648] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b [12465.028657] saa7134: card=27 -> Manli MuchTV M-TV002 [12465.028663] saa7134: card=28 -> Manli MuchTV M-TV001 [12465.028670] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c [12465.028679] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4 [12465.028687] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5 [12465.028695] saa7134: card=32 -> AVACS SmartTV [12465.028702] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff [12465.028710] saa7134: card=34 -> Noval Prime TV 7133 [12465.028717] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115 [12465.028725] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800 [12465.028734] saa7134: card=37 -> Items MuchTV Plus / IT-005 [12465.028740] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152 [12465.028749] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212 5169:1502 [12465.028760] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100 [12465.028768] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100 [12465.028776] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130) [12465.028783] saa7134: card=43 -> :Zolid Xpert TV7134 [12465.028790] saa7134: card=44 -> Empire PCI TV-Radio LE [12465.028796] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715 [12465.028805] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee [12465.028813] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162 [12465.028821] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158 [12465.028830] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200 [12465.028838] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d [12465.028847] saa7134: card=51 -> ProVideo PV952 1540:9524 [12465.028855] saa7134: card=52 -> AverMedia AverTV/305 1461:2108 [12465.028863] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845 [12465.028871] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 5168:5214 1489:0214 5168:0304 [12465.028884] saa7134: card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306 [12465.028894] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a [12465.028903] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f [12465.028911] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370 [12465.028924] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 [12465.028931] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502 [12465.028942] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004 [12465.028951] saa7134: card=62 -> Compro VideoMate TV Gold+II [12465.028958] saa7134: card=63 -> Kworld Xpert TV PVR7134 [12465.028964] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210 [12465.028973] saa7134: card=65 -> V-Stream Studio TV Terminator [12465.028980] saa7134: card=66 -> Yuan TUN-900 (saa7135) [12465.028986] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091 [12465.028995] saa7134: card=68 -> GoTView 7135 PCI 5456:7135 [12465.029003] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004 [12465.029011] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900 [12465.029020] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901 [12465.029028] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350 [12465.029036] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330 [12465.029045] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212 [12465.029053] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044 [12465.029062] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9 [12465.029070] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e [12465.029078] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 [12465.029087] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO [12465.029094] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210 [12465.029102] saa7134: card=81 -> Philips Tiger reference design 1131:2018 [12465.029110] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231 1462:8624 [12465.029120] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160 [12465.029128] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319 [12465.029137] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05 [12465.029147] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301 [12465.029156] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421 [12465.029165] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201 [12465.029173] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c [12465.029182] saa7134: card=90 -> Kworld ATSC110/115 17de:7350 17de:7352 [12465.029191] saa7134: card=91 -> AVerMedia A169 B 1461:7360 [12465.029200] saa7134: card=92 -> AVerMedia A169 B1 1461:6360 [12465.029208] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005 [12465.029216] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV 5168:3306 5168:3502 5168:3307 4e42:3502 [12465.029229] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138 [12465.029238] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008 16be:000d [12465.029249] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300 [12465.029259] saa7134: card=98 -> Proteus Pro 2309 0919:2003 [12465.029267] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00 [12465.029276] saa7134: card=100 -> Asus Europa2 OEM 1043:4860 [12465.029284] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f [12465.029293] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715 [12465.029301] saa7134: card=103 -> Compro Videomate DVB-T200A [12465.029308] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705 [12465.029324] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172 [12465.029332] saa7134: card=106 -> Encore ENLTV 1131:2342 1131:2341 3016:2344 [12465.029344] saa7134: card=107 -> Encore ENLTV-FM 1131:230f [12465.029352] saa7134: card=108 -> Terratec Cinergy HT PCI 153b:1175 [12465.029360] saa7134: card=109 -> Philips Tiger - S Reference design [12465.029367] saa7134: card=110 -> Avermedia M102 1461:f31e [12465.029375] saa7134: card=111 -> ASUS P7131 4871 1043:4871 [12465.029384] saa7134: card=112 -> ASUSTeK P7131 Hybrid 1043:4876 [12465.029392] saa7134: card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card 1019:4cb6 [12465.029401] saa7134: card=114 -> KWorld DVB-T 210 17de:7250 [12465.029409] saa7134: card=115 -> Sabrent PCMCIA TV-PCB05 0919:2003 [12465.029418] saa7134: card=116 -> 10MOONS TM300 TV Card 1131:2304 [12465.029426] saa7134: card=117 -> Avermedia Super 007 1461:f01d [12465.029435] saa7134: card=118 -> Beholder BeholdTV 401 0000:4016 [12465.029443] saa7134: card=119 -> Beholder BeholdTV 403 0000:4036 [12465.029451] saa7134: card=120 -> Beholder BeholdTV 403 FM 0000:4037 [12465.029459] saa7134: card=121 -> Beholder BeholdTV 405 0000:4050 [12465.029468] saa7134: card=122 -> Beholder BeholdTV 405 FM 0000:4051 [12465.029476] saa7134: card=123 -> Beholder BeholdTV 407 0000:4070 [12465.029484] saa7134: card=124 -> Beholder BeholdTV 407 FM 0000:4071 [12465.029493] saa7134: card=125 -> Beholder BeholdTV 409 0000:4090 [12465.029501] saa7134: card=126 -> Beholder BeholdTV 505 FM 5ace:5050 [12465.029510] saa7134: card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509 5ace:5070 5ace:5090 [12465.029520] saa7134: card=128 -> Beholder BeholdTV Columbus TVFM 0000:5201 [12465.029528] saa7134: card=129 -> Beholder BeholdTV 607 FM 5ace:6070 [12465.029537] saa7134: card=130 -> Beholder BeholdTV M6 5ace:6190 [12465.029545] saa7134: card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 [12465.029554] saa7134: card=132 -> Genius TVGO AM11MCE [12465.029560] saa7134: card=133 -> NXP Snake DVB-S reference design [12465.029567] saa7134: card=134 -> Medion/Creatix CTX953 Hybrid 16be:0010 [12465.029576] saa7134: card=135 -> MSI TV@nywhere A/D v1.1 1462:8625 [12465.029584] saa7134: card=136 -> AVerMedia Cardbus TV/Radio (E506R) 1461:f436 [12465.029592] saa7134: card=137 -> AVerMedia Hybrid TV/Radio (A16D) 1461:f936 [12465.029601] saa7134: card=138 -> Avermedia M115 1461:a836 [12465.029609] saa7134: card=139 -> Compro VideoMate T750 185b:c900 [12465.029617] saa7134: card=140 -> Avermedia DVB-S Pro A700 1461:a7a1 [12465.029626] saa7134: card=141 -> Avermedia DVB-S Hybrid+FM A700 1461:a7a2 [12465.029634] saa7134: card=142 -> Beholder BeholdTV H6 5ace:6290 [12465.029642] saa7134: card=143 -> Beholder BeholdTV M63 5ace:6191 [12465.029651] saa7134: card=144 -> Beholder BeholdTV M6 Extra 5ace:6193 [12465.029659] saa7134: card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636 1461:f736 [12465.029669] saa7134: card=146 -> ASUSTeK P7131 Analog [12465.029676] saa7134: card=147 -> Asus Tiger 3in1 1043:4878 [12465.029684] saa7134: card=148 -> Encore ENLTV-FM v5.3 1a7f:2008 [12465.029693] saa7134: card=149 -> Avermedia PCI pure analog (M135A) 1461:f11d [12465.029701] saa7134: card=150 -> Zogis Real Angel 220 [12465.029708] saa7134: card=151 -> ADS Tech Instant HDTV 1421:0380 [12465.029716] saa7134: card=152 -> Asus Tiger Rev:1.00 1043:4857 [12465.029725] saa7134: card=153 -> Kworld Plus TV Analog Lite PCI 17de:7128 [12465.029733] saa7134: card=154 -> Avermedia AVerTV GO 007 FM Plus 1461:f31d [12465.029742] saa7134: card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706 0070:6708 [12465.029752] saa7134: card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707 0070:6709 0070:670a [12465.029763] saa7134: card=157 -> Avermedia AVerTV Studio 507UA 1461:a11b [12465.029772] saa7134: card=158 -> AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 [12465.029780] saa7134: card=159 -> Beholder BeholdTV 505 RDS 0000:505b [12465.029789] saa7134: card=160 -> Beholder BeholdTV 507 RDS 0000:5071 [12465.029797] saa7134: card=161 -> Beholder BeholdTV 507 RDS 0000:507b [12465.029806] saa7134: card=162 -> Beholder BeholdTV 607 FM 5ace:6071 [12465.029815] saa7134: card=163 -> Beholder BeholdTV 609 FM 5ace:6090 [12465.029823] saa7134: card=164 -> Beholder BeholdTV 609 FM 5ace:6091 [12465.029832] saa7134: card=165 -> Beholder BeholdTV 607 RDS 5ace:6072 [12465.029840] saa7134: card=166 -> Beholder BeholdTV 607 RDS 5ace:6073 [12465.029849] saa7134: card=167 -> Beholder BeholdTV 609 RDS 5ace:6092 [12465.029857] saa7134: card=168 -> Beholder BeholdTV 609 RDS 5ace:6093 [12465.029866] saa7134: card=169 -> Compro VideoMate S350/S300 185b:c900 [12465.029874] saa7134: card=170 -> AverMedia AverTV Studio 505 1461:a115 [12465.029883] saa7134: card=171 -> Beholder BeholdTV X7 5ace:7595 [12465.029892] saa7134: card=172 -> RoverMedia TV Link Pro FM 19d1:0138 [12465.029900] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI 1131:2004 [12465.029909] saa7134: card=174 -> Asus Europa Hybrid OEM 1043:4847 [12465.029917] saa7134: card=175 -> Leadtek Winfast DTV1000S 107d:6655 [12465.029926] saa7134: card=176 -> Beholder BeholdTV 505 RDS 0000:5051 [12465.029934] saa7134: card=177 -> Hawell HW-404M7 [12465.029941] saa7134: card=178 -> Beholder BeholdTV H7 [12465.029948] saa7134: card=179 -> Beholder BeholdTV A7 [12465.029955] saa7134: card=180 -> Avermedia PCI M733A 1461:4155 1461:4255 [12465.029967] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] [12465.030033] saa7130[0]: can't get MMIO memory @ 0x0 [12465.030051] saa7134: probe of 0000:01:07.0 failed with error -16 [12465.053892] saa7134 ALSA driver for DMA sound loaded [12465.053900] saa7134 ALSA: no saa7134 cards found tvtime-scanner Leyendo la configuración de /etc/tvtime/tvtime.xml Leyendo la configuración de /home/ricardo/.tvtime/tvtime.xml Escaneando usando la norma de TV NTSC. /home/ricardo/.tvtime/stationlist.xml: No existing NTSC station list "Custom". videoinput: Cannot open capture device /dev/video0: No existe el dispositivo o la dirección

  Read the article

• Dual booting on separate hard drives

  - by tornadorider

  I have windows XP professional installed on 1 hard drive and Ubuntu 10.10 on my second hard drive. On start up the computer completely skips the grub menu and boots straight into 10.10. I have tried running os-prober with the windows hard drive mounted and then updating grub but it didnt work. Any ideas? I have changed the boot order so that the HDD with xp on it is first however the computer still booted into linux. I tried running grub-install /dev/sda and got this /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. /usr/sbin/grub-setup: warn: Sector 33 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. Installation finished. No error reported I checked using disk utility and the code for my xp hard drive is sdb so i ran the camand grub-install /dev/sdb shich gave me this Installation finished. No error reported. So i rebooted but it still didnt work. Any other ideas? Additional info gedit /boot/grub/grub.cfg: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### sudo fdisk -l: Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008a483 Device Boot Start End Blocks Id System /dev/sda1 * 1 9352 75112448 83 Linux /dev/sda2 9352 9734 3068929 5 Extended /dev/sda5 9352 9734 3068928 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc5d6c5d6 Device Boot Start End Blocks Id System /dev/sdb1 1 60800 488375968+ 7 HPFS/NTFS sudo blkid /dev/sda1: UUID="d682c9bd-dd89-4827-9802-a1f921ebe21c" TYPE="ext4" /dev/sda5: UUID="09e9c2cb-d903-4f0b-a181-536951845231" TYPE="swap" /dev/sdb1: UUID="B21844EB1844AFE1" TYPE="ntfs" sudo os-prober (nothing) Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for (,msdos1)/boot/grub. sda1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: _________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders, total 156368016 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 150,226,943 150,224,896 83 Linux /dev/sda2 150,228,990 156,366,847 6,137,858 5 Extended /dev/sda5 150,228,992 156,366,847 6,137,856 82 Linux swap / Solaris Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 63 976,751,999 976,751,937 7 HPFS/NTFS blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 d682c9bd-dd89-4827-9802-a1f921ebe21c ext4 /dev/sda2: PTTYPE="dos" /dev/sda5 09e9c2cb-d903-4f0b-a181-536951845231 swap /dev/sda: PTTYPE="dos" /dev/sdb1 B21844EB1844AFE1 ntfs /dev/sdb: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry "Windows XP" { set root=(hd1,1) chainloader (hd1,1)+1 } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=09e9c2cb-d903-4f0b-a181-536951845231 none swap sw 0 0 =================== sda1: Location of files loaded by Grub: =================== 51.7GB: boot/grub/core.img 58.5GB: boot/grub/grub.cfg 1.2GB: boot/initrd.img-2.6.35-22-generic 1.3GB: boot/initrd.img-2.6.35-28-generic 58.2GB: boot/vmlinuz-2.6.35-22-generic 51.7GB: boot/vmlinuz-2.6.35-28-generic 1.3GB: initrd.img 1.2GB: initrd.img.old 51.7GB: vmlinuz 58.2GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sda2 00000000 d9 ed 13 ab ff a8 33 8c 01 b2 47 99 e1 4a b1 f1 |......3...G..J..| 00000010 69 5f a7 29 a4 1a 03 9e 31 b9 45 02 71 e6 58 78 |i_.)....1.E.q.Xx| 00000020 3d f6 ee 7b 3e 33 1b 82 c6 7d cf 1a c8 e7 bc 2f |=..{>3...}...../| 00000030 b9 e1 70 75 cf 18 aa e7 d5 7e 3c f1 b4 e7 9e 3a |..pu.....~<....:| 00000040 55 38 f1 b4 ee 78 59 0b 5e f7 3c 4c 57 73 9c 2a |U8...xY.^.<LWs.*| 00000050 28 f1 19 ed 11 9c b2 19 e2 80 92 1c 7b 84 ee 0b |(...........{...| 00000060 e2 c0 ac af 0a 50 42 b9 cf 0c dc 2c 20 77 85 dc |.....PB...., w..| 00000070 8f 70 5f 7b 84 9b a1 f7 8c 2d ee 70 5c ae f7 39 |.p_{.....-.p\..9| 00000080 63 f7 09 8a ec 79 4c ed 9f cc ad 3c f8 1b 47 7d |c....yL....<..G}| 00000090 3f 97 d5 16 cb 29 45 38 25 61 36 08 de 10 93 0f |?....)E8%a6.....| 000000a0 95 4f ea 54 f9 89 ff f1 bf 9a cc bb fd b6 22 b1 |.O.T..........".| 000000b0 65 08 05 21 78 19 46 b0 24 7e fb de d4 b3 ba d6 |e..!x.F.$~......| 000000c0 ec 11 65 82 ee 10 1d 12 04 91 da 6d 67 47 ea 9b |..e........mgG..| 000000d0 6f b0 aa fb cb 67 10 64 86 e8 26 85 fb f9 50 77 |o....g.d..&...Pw| 000000e0 9d 13 9b 9e d9 11 f3 a1 50 1b 11 b7 93 79 9f ab |........P....y..| 000000f0 c1 b6 86 0f 35 ed d4 9f dc f8 db bd ed 45 3a 68 |....5........E:h| 00000100 54 68 4a 1d d1 fc b8 c9 72 b4 d7 7b 60 e7 39 2f |ThJ.....r..{`.9/| 00000110 2a 0a 4e 52 72 52 c6 e2 2a 55 6a 2a e1 82 40 71 |*.NRrR..*Uj*..@q| 00000120 11 11 e0 53 d6 ff 1b a9 c6 65 df 1e b7 15 6f a2 |...S.....e....o.| 00000130 15 02 a4 6d 19 b7 78 57 a6 ee 9e 36 08 7d 6f 7c |...m..xW...6.}o|| 00000140 fd f7 7c d5 40 ff 0f c7 97 dc aa 00 ce 8b bb dc |..|.@...........| 00000150 e2 eb 1c 50 74 d8 14 cc 9a d6 5c a2 ab f2 67 f9 |...Pt.....\...g.| 00000160 58 ed 43 79 0e 78 7a 5c a6 f8 7b e8 05 4e 62 8a |X.Cy.xz\..{..Nb.| 00000170 0a 5f 22 ee a6 38 b9 e1 32 45 97 08 cc 75 66 c6 |._"..8..2E...uf.| 00000180 b3 a2 2d 89 a1 e9 95 21 28 53 fd dd be b1 b2 a2 |..-....!(S......| 00000190 78 3f a3 c9 3d e3 31 54 88 cf 78 0d e1 21 a8 74 |x?..=.1T..x..!.t| 000001a0 06 60 9d 21 c6 7a 24 e1 cc 28 f8 98 e0 99 e3 fc |.`.!.z$..(......| 000001b0 fa 8b eb d5 56 03 20 b8 54 ba c6 ee 9f 57 00 fe |....V. .T....W..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 5d 00 00 00 |............]...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200

  Read the article

• How to allow bind in app armor?

  - by WitchCraft

  Question: I did setup bind9 as described here: http://ubuntuforums.org/showthread.php?p=12149576#post12149576 Now I have a little problem with apparmor: If I switch it off, it works. If apparmor runs, it doesn't work, and I get the following dmesg output: [ 23.809767] type=1400 audit(1344097913.519:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1540 comm="apparmor_parser" [ 23.811537] type=1400 audit(1344097913.519:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1540 comm="apparmor_parser" [ 23.812514] type=1400 audit(1344097913.523:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1540 comm="apparmor_parser" [ 23.821999] type=1400 audit(1344097913.531:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1544 comm="apparmor_parser" [ 23.845085] type=1400 audit(1344097913.555:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1543 comm="apparmor_parser" [ 23.849051] type=1400 audit(1344097913.559:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=1545 comm="apparmor_parser" [ 23.849509] type=1400 audit(1344097913.559:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1542 comm="apparmor_parser" [ 23.851597] type=1400 audit(1344097913.559:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1547 comm="apparmor_parser" [ 24.415193] type=1400 audit(1344097914.123:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1625 comm="apparmor_parser" [ 24.738631] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.005242] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 25.187939] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 26.004282] Ebtables v2.0 registered [ 26.068783] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 28.158848] postgres (1900): /proc/1900/oom_adj is deprecated, please use /proc/1900/oom_score_adj instead. [ 29.840079] xenbr0: no IPv6 routers present [ 31.502916] type=1400 audit(1344097919.088:20): apparmor="DENIED" operation="mknod" parent=1984 profile="/usr/sbin/named" name="/var/log/query.log" pid=1989 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 34.336141] xenbr0: port 1(eth0) entering forwarding state [ 38.424359] Event-channel device installed. [ 38.853077] XENBUS: Unable to read cpu state [ 38.854215] XENBUS: Unable to read cpu state [ 38.855231] XENBUS: Unable to read cpu state [ 38.858891] XENBUS: Unable to read cpu state [ 47.411497] device vif1.0 entered promiscuous mode [ 47.429245] ADDRCONF(NETDEV_UP): vif1.0: link is not ready [ 49.366219] virbr0: port 1(vif1.0) entering disabled state [ 49.366705] virbr0: port 1(vif1.0) entering disabled state [ 49.368873] virbr0: mixed no checksumming and other settings. [ 97.273028] type=1400 audit(1344097984.861:21): apparmor="DENIED" operation="mknod" parent=3076 profile="/usr/sbin/named" name="/var/log/query.log" pid=3078 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 277.790627] type=1400 audit(1344098165.377:22): apparmor="DENIED" operation="mknod" parent=3384 profile="/usr/sbin/named" name="/var/log/query.log" pid=3389 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 287.812986] type=1400 audit(1344098175.401:23): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/root/tmp-gjnX0c0dDa" pid=3400 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 287.818466] type=1400 audit(1344098175.405:24): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/root/tmp-CpOtH52qU5" pid=3400 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 323.166228] type=1400 audit(1344098210.753:25): apparmor="DENIED" operation="mknod" parent=3422 profile="/usr/sbin/named" name="/var/log/query.log" pid=3427 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 386.512586] type=1400 audit(1344098274.101:26): apparmor="DENIED" operation="mknod" parent=3456 profile="/usr/sbin/named" name="/var/log/query.log" pid=3459 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 808.549049] type=1400 audit(1344098696.137:27): apparmor="DENIED" operation="mknod" parent=3872 profile="/usr/sbin/named" name="/var/log/query.log" pid=3877 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 894.671081] type=1400 audit(1344098782.257:28): apparmor="DENIED" operation="mknod" parent=3922 profile="/usr/sbin/named" name="/var/log/query.log" pid=3927 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 968.514669] type=1400 audit(1344098856.101:29): apparmor="DENIED" operation="mknod" parent=3978 profile="/usr/sbin/named" name="/var/log/query.log" pid=3983 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1021.814582] type=1400 audit(1344098909.401:30): apparmor="DENIED" operation="mknod" parent=4010 profile="/usr/sbin/named" name="/var/log/query.log" pid=4012 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1063.856633] type=1400 audit(1344098951.445:31): apparmor="DENIED" operation="mknod" parent=4041 profile="/usr/sbin/named" name="/var/log/query.log" pid=4043 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1085.404001] type=1400 audit(1344098972.989:32): apparmor="DENIED" operation="mknod" parent=4072 profile="/usr/sbin/named" name="/var/log/query.log" pid=4077 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1108.207402] type=1400 audit(1344098995.793:33): apparmor="DENIED" operation="mknod" parent=4102 profile="/usr/sbin/named" name="/var/log/query.log" pid=4107 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1156.947189] type=1400 audit(1344099044.533:34): apparmor="DENIED" operation="mknod" parent=4134 profile="/usr/sbin/named" name="/var/log/query.log" pid=4136 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1166.768005] type=1400 audit(1344099054.353:35): apparmor="DENIED" operation="mknod" parent=4150 profile="/usr/sbin/named" name="/var/log/query.log" pid=4155 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1168.873385] type=1400 audit(1344099056.461:36): apparmor="DENIED" operation="mknod" parent=4162 profile="/usr/sbin/named" name="/var/log/query.log" pid=4167 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1181.558946] type=1400 audit(1344099069.145:37): apparmor="DENIED" operation="mknod" parent=4177 profile="/usr/sbin/named" name="/var/log/query.log" pid=4182 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1199.349265] type=1400 audit(1344099086.937:38): apparmor="DENIED" operation="mknod" parent=4191 profile="/usr/sbin/named" name="/var/log/query.log" pid=4196 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1296.805604] type=1400 audit(1344099184.393:39): apparmor="DENIED" operation="mknod" parent=4232 profile="/usr/sbin/named" name="/var/log/query.log" pid=4237 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1317.730568] type=1400 audit(1344099205.317:40): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-nuBes0IXwi" pid=4251 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1317.730744] type=1400 audit(1344099205.317:41): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-ZDJA06ZOkU" pid=4252 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1365.072687] type=1400 audit(1344099252.661:42): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-EnsuYUrGOC" pid=4290 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1365.074520] type=1400 audit(1344099252.661:43): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-LVCnpWOStP" pid=4287 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1380.336984] type=1400 audit(1344099267.925:44): apparmor="DENIED" operation="mknod" parent=4617 profile="/usr/sbin/named" name="/var/log/query.log" pid=4622 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1437.924534] type=1400 audit(1344099325.513:45): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-Uyf1dHIZUU" pid=4648 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1437.924626] type=1400 audit(1344099325.513:46): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/tmp-OABXWclII3" pid=4647 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1526.334959] type=1400 audit(1344099413.921:47): apparmor="DENIED" operation="mknod" parent=4749 profile="/usr/sbin/named" name="/var/log/query.log" pid=4754 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1601.292548] type=1400 audit(1344099488.881:48): apparmor="DENIED" operation="mknod" parent=4835 profile="/usr/sbin/named" name="/var/log/query.log" pid=4840 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 1639.543733] type=1400 audit(1344099527.129:49): apparmor="DENIED" operation="mknod" parent=4905 profile="/usr/sbin/named" name="/var/log/query.log" pid=4907 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1916.381179] type=1400 audit(1344099803.969:50): apparmor="DENIED" operation="mknod" parent=4959 profile="/usr/sbin/named" name="/var/log/query.log" pid=4961 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 1940.816898] type=1400 audit(1344099828.405:51): apparmor="DENIED" operation="mknod" parent=4991 profile="/usr/sbin/named" name="/var/log/query.log" pid=4996 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 2043.010898] type=1400 audit(1344099930.597:52): apparmor="DENIED" operation="mknod" parent=5048 profile="/usr/sbin/named" name="/var/log/query.log" pid=5053 comm="named" requested_mask="c" denied_mask="c" fsuid=107 ouid=107 [ 2084.956230] type=1400 audit(1344099972.545:53): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/var/log/tmp-XYgr33RqUt" pid=5069 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 2084.959120] type=1400 audit(1344099972.545:54): apparmor="DENIED" operation="mknod" parent=3325 profile="/usr/sbin/named" name="/var/log/tmp-vO24RHwL14" pid=5066 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 2088.169500] type=1400 audit(1344099975.757:55): apparmor="DENIED" operation="mknod" parent=5076 profile="/usr/sbin/named" name="/var/log/query.log" pid=5078 comm="named" requested_mask="c" denied_mask="c" fsuid=0 ouid=0 [ 2165.625096] type=1400 audit(1344100053.213:56): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=5124 comm="apparmor" [ 2165.625401] type=1400 audit(1344100053.213:57): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=5124 comm="apparmor" [ 2165.625608] type=1400 audit(1344100053.213:58): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=5124 comm="apparmor" [ 2165.625782] type=1400 audit(1344100053.213:59): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=5124 comm="apparmor" [ 2165.625931] type=1400 audit(1344100053.213:60): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=5124 comm="apparmor" [ 2165.626057] type=1400 audit(1344100053.213:61): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=5124 comm="apparmor" [ 2165.626181] type=1400 audit(1344100053.213:62): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=5124 comm="apparmor" [ 2165.626319] type=1400 audit(1344100053.213:63): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=5124 comm="apparmor" [ 3709.583927] type=1400 audit(1344101597.169:64): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=7484 comm="apparmor_parser" [ 3709.839895] type=1400 audit(1344101597.425:65): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=7485 comm="apparmor_parser" [ 3710.008892] type=1400 audit(1344101597.597:66): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=7483 comm="apparmor_parser" [ 3710.545232] type=1400 audit(1344101598.133:67): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=7486 comm="apparmor_parser" [ 3710.655600] type=1400 audit(1344101598.241:68): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=7481 comm="apparmor_parser" [ 3710.656013] type=1400 audit(1344101598.241:69): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7481 comm="apparmor_parser" [ 3710.656786] type=1400 audit(1344101598.245:70): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=7481 comm="apparmor_parser" [ 3710.832624] type=1400 audit(1344101598.421:71): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=7488 comm="apparmor_parser" [ 3717.573123] type=1400 audit(1344101605.161:72): apparmor="DENIED" operation="open" parent=7505 profile="/usr/sbin/named" name="/var/log/query.log" pid=7510 comm="named" requested_mask="ac" denied_mask="ac" fsuid=107 ouid=0 [ 3743.667808] type=1400 audit(1344101631.253:73): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=7552 comm="apparmor" [ 3743.668338] type=1400 audit(1344101631.257:74): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7552 comm="apparmor" [ 3743.668625] type=1400 audit(1344101631.257:75): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=7552 comm="apparmor" [ 3743.668834] type=1400 audit(1344101631.257:76): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=7552 comm="apparmor" [ 3743.668991] type=1400 audit(1344101631.257:77): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=7552 comm="apparmor" [ 3743.669127] type=1400 audit(1344101631.257:78): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=7552 comm="apparmor" [ 3743.669282] type=1400 audit(1344101631.257:79): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=7552 comm="apparmor" [ 3743.669520] type=1400 audit(1344101631.257:80): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=7552 comm="apparmor" [ 3873.572336] type=1400 audit(1344101761.161:81): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=7722 comm="apparmor_parser" [ 3873.826209] type=1400 audit(1344101761.413:82): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=7723 comm="apparmor_parser" [ 3873.988181] type=1400 audit(1344101761.577:83): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=7721 comm="apparmor_parser" [ 3874.520305] type=1400 audit(1344101762.109:84): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=7719 comm="apparmor_parser" [ 3874.520736] type=1400 audit(1344101762.109:85): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7719 comm="apparmor_parser" [ 3874.521000] type=1400 audit(1344101762.109:86): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=7719 comm="apparmor_parser" [ 3874.528878] type=1400 audit(1344101762.117:87): apparmor="STATUS" operation="profile_load" name="/usr/sbin/named" pid=7724 comm="apparmor_parser" [ 3874.930712] type=1400 audit(1344101762.517:88): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=7726 comm="apparmor_parser" [ 3971.744599] type=1400 audit(1344101859.333:89): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/libvirtd" pid=7899 comm="apparmor_parser" [ 3972.009857] type=1400 audit(1344101859.597:90): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=7900 comm="apparmor_parser" [ 3972.165297] type=1400 audit(1344101859.753:91): apparmor="STATUS" operation="profile_replace" name="/usr/lib/libvirt/virt-aa-helper" pid=7898 comm="apparmor_parser" [ 3972.587766] type=1400 audit(1344101860.173:92): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/named" pid=7901 comm="apparmor_parser" [ 3972.847189] type=1400 audit(1344101860.433:93): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=7896 comm="apparmor_parser" [ 3972.847705] type=1400 audit(1344101860.433:94): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7896 comm="apparmor_parser" [ 3972.848150] type=1400 audit(1344101860.433:95): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=7896 comm="apparmor_parser" [ 3973.147889] type=1400 audit(1344101860.733:96): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=7903 comm="apparmor_parser" [ 3988.863999] type=1400 audit(1344101876.449:97): apparmor="DENIED" operation="open" parent=7939 profile="/usr/sbin/named" name="/var/log/query.log" pid=7944 comm="named" requested_mask="ac" denied_mask="ac" fsuid=107 ouid=0 [ 4025.826132] type=1400 audit(1344101913.413:98): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=7975 comm="apparmor" [ 4025.826627] type=1400 audit(1344101913.413:99): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7975 comm="apparmor" [ 4025.826861] type=1400 audit(1344101913.413:100): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=7975 comm="apparmor" [ 4025.827059] type=1400 audit(1344101913.413:101): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=7975 comm="apparmor" [ 4025.827214] type=1400 audit(1344101913.413:102): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=7975 comm="apparmor" [ 4025.827352] type=1400 audit(1344101913.413:103): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=7975 comm="apparmor" [ 4025.827485] type=1400 audit(1344101913.413:104): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=7975 comm="apparmor" [ 4025.827624] type=1400 audit(1344101913.413:105): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=7975 comm="apparmor" [ 4027.862198] type=1400 audit(1344101915.449:106): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=8090 comm="apparmor_parser" [ 4039.500920] audit_printk_skb: 21 callbacks suppressed [ 4039.500932] type=1400 audit(1344101927.089:114): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=8114 comm="apparmor" [ 4039.501413] type=1400 audit(1344101927.089:115): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8114 comm="apparmor" [ 4039.501672] type=1400 audit(1344101927.089:116): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=8114 comm="apparmor" [ 4039.501861] type=1400 audit(1344101927.089:117): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=8114 comm="apparmor" [ 4039.502033] type=1400 audit(1344101927.089:118): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=8114 comm="apparmor" [ 4039.502170] type=1400 audit(1344101927.089:119): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=8114 comm="apparmor" [ 4039.502305] type=1400 audit(1344101927.089:120): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=8114 comm="apparmor" [ 4039.502442] type=1400 audit(1344101927.089:121): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=8114 comm="apparmor" [ 4041.425405] type=1400 audit(1344101929.013:122): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=8240 comm="apparmor_parser" [ 4041.425952] type=1400 audit(1344101929.013:123): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=8238 comm="apparmor_parser" [ 4058.910390] audit_printk_skb: 18 callbacks suppressed [ 4058.910401] type=1400 audit(1344101946.497:130): apparmor="STATUS" operation="profile_remove" name="/sbin/dhclient" pid=8264 comm="apparmor" [ 4058.910757] type=1400 audit(1344101946.497:131): apparmor="STATUS" operation="profile_remove" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8264 comm="apparmor" [ 4058.910969] type=1400 audit(1344101946.497:132): apparmor="STATUS" operation="profile_remove" name="/usr/lib/connman/scripts/dhclient-script" pid=8264 comm="apparmor" [ 4058.911185] type=1400 audit(1344101946.497:133): apparmor="STATUS" operation="profile_remove" name="/usr/lib/libvirt/virt-aa-helper" pid=8264 comm="apparmor" [ 4058.911335] type=1400 audit(1344101946.497:134): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/libvirtd" pid=8264 comm="apparmor" [ 4058.911595] type=1400 audit(1344101946.497:135): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/mysqld" pid=8264 comm="apparmor" [ 4058.911856] type=1400 audit(1344101946.497:136): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/named" pid=8264 comm="apparmor" [ 4058.912001] type=1400 audit(1344101946.497:137): apparmor="STATUS" operation="profile_remove" name="/usr/sbin/tcpdump" pid=8264 comm="apparmor" [ 4060.266700] type=1400 audit(1344101947.853:138): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=8391 comm="apparmor_parser" [ 4060.268356] type=1400 audit(1344101947.857:139): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8391 comm="apparmor_parser" [ 5909.432749] audit_printk_skb: 18 callbacks suppressed [ 5909.432759] type=1400 audit(1344103797.021:146): apparmor="DENIED" operation="open" parent=8800 profile="/usr/sbin/named" name="/var/log/query.log" pid=8805 comm="named" requested_mask="ac" denied_mask="ac" fsuid=107 ouid=0 root@zotac:~# What can I do that it still works and I don't have to disable apparmor ?

  Read the article

• Currency Conversion in Oracle BI applications

  - by Saurabh Verma

  Authored by Vijay Aggarwal and Hichem Sellami A typical data warehouse contains Star and/or Snowflake schema, made up of Dimensions and Facts. The facts store various numerical information including amounts. Example; Order Amount, Invoice Amount etc. With the true global nature of business now-a-days, the end-users want to view the reports in their own currency or in global/common currency as defined by their business. This presents a unique opportunity in BI to provide the amounts in converted rates either by pre-storing or by doing on-the-fly conversions while displaying the reports to the users. Source Systems OBIA caters to various source systems like EBS, PSFT, Sebl, JDE, Fusion etc. Each source has its own unique and intricate ways of defining and storing currency data, doing currency conversions and presenting to the OLTP users. For example; EBS stores conversion rates between currencies which can be classified by conversion rates, like Corporate rate, Spot rate, Period rate etc. Siebel stores exchange rates by conversion rates like Daily. EBS/Fusion stores the conversion rates for each day, where as PSFT/Siebel store for a range of days. PSFT has Rate Multiplication Factor and Rate Division Factor and we need to calculate the Rate based on them, where as other Source systems store the Currency Exchange Rate directly. OBIA Design The data consolidation from various disparate source systems, poses the challenge to conform various currencies, rate types, exchange rates etc., and designing the best way to present the amounts to the users without affecting the performance. When consolidating the data for reporting in OBIA, we have designed the mechanisms in the Common Dimension, to allow users to report based on their required currencies. OBIA Facts store amounts in various currencies: Document Currency: This is the currency of the actual transaction. For a multinational company, this can be in various currencies. Local Currency: This is the base currency in which the accounting entries are recorded by the business. This is generally defined in the Ledger of the company. Global Currencies: OBIA provides five Global Currencies. Three are used across all modules. The last two are for CRM only. A Global currency is very useful when creating reports where the data is viewed enterprise-wide. Example; a US based multinational would want to see the reports in USD. The company will choose USD as one of the global currencies. OBIA allows users to define up-to five global currencies during the initial implementation. The term Currency Preference is used to designate the set of values: Document Currency, Local Currency, Global Currency 1, Global Currency 2, Global Currency 3; which are shared among all modules. There are four more currency preferences, specific to certain modules: Global Currency 4 (aka CRM Currency) and Global Currency 5 which are used in CRM; and Project Currency and Contract Currency, used in Project Analytics. When choosing Local Currency for Currency preference, the data will show in the currency of the Ledger (or Business Unit) in the prompt. So it is important to select one Ledger or Business Unit when viewing data in Local Currency. More on this can be found in the section: Toggling Currency Preferences in the Dashboard. Design Logic When extracting the fact data, the OOTB mappings extract and load the document amount, and the local amount in target tables. It also loads the exchange rates required to convert the document amount into the corresponding global amounts. If the source system only provides the document amount in the transaction, the extract mapping does a lookup to get the Local currency code, and the Local exchange rate. The Load mapping then uses the local currency code and rate to derive the local amount. The load mapping also fetches the Global Currencies and looks up the corresponding exchange rates. The lookup of exchange rates is done via the Exchange Rate Dimension provided as a Common/Conforming Dimension in OBIA. The Exchange Rate Dimension stores the exchange rates between various currencies for a date range and Rate Type. Two physical tables W_EXCH_RATE_G and W_GLOBAL_EXCH_RATE_G are used to provide the lookups and conversions between currencies. The data is loaded from the source system’s Ledger tables. W_EXCH_RATE_G stores the exchange rates between currencies with a date range. On the other hand, W_GLOBAL_EXCH_RATE_G stores the currency conversions between the document currency and the pre-defined five Global Currencies for each day. Based on the requirements, the fact mappings can decide and use one or both tables to do the conversion. Currency design in OBIA also taps into the MLS and Domain architecture, thus allowing the users to map the currencies to a universal Domain during the implementation time. This is especially important for companies deploying and using OBIA with multiple source adapters. Some Gotchas to Look for It is necessary to think through the currencies during the initial implementation. 1) Identify various types of currencies that are used by your business. Understand what will be your Local (or Base) and Documentation currency. Identify various global currencies that your users will want to look at the reports. This will be based on the global nature of your business. Changes to these currencies later in the project, while permitted, but may cause Full data loads and hence lost time. 2) If the user has a multi source system make sure that the Global Currencies and Global Rate Types chosen in Configuration Manager do have the corresponding source specific counterparts. In other words, make sure for every DW specific value chosen for Currency Code or Rate Type, there is a source Domain mapping already done. Technical Section This section will briefly mention the technical scenarios employed in the OBIA adaptors to extract data from each source system. In OBIA, we have two main tables which store the Currency Rate information as explained in previous sections. W_EXCH_RATE_G and W_GLOBAL_EXCH_RATE_G are the two tables. W_EXCH_RATE_G stores all the Currency Conversions present in the source system. It captures data for a Date Range. W_GLOBAL_EXCH_RATE_G has Global Currency Conversions stored at a Daily level. However the challenge here is to store all the 5 Global Currency Exchange Rates in a single record for each From Currency. Let’s voyage further into the Source System Extraction logic for each of these tables and understand the flow briefly. EBS: In EBS, we have Currency Data stored in GL_DAILY_RATES table. As the name indicates GL_DAILY_RATES EBS table has data at a daily level. However in our warehouse we store the data with a Date Range and insert a new range record only when the Exchange Rate changes for a particular From Currency, To Currency and Rate Type. Below are the main logical steps that we employ in this process. (Incremental Flow only) – Cleanup the data in W_EXCH_RATE_G. Delete the records which have Start Date > minimum conversion date Update the End Date of the existing records. Compress the daily data from GL_DAILY_RATES table into Range Records. Incremental map uses $$XRATE_UPD_NUM_DAY as an extra parameter. Generate Previous Rate, Previous Date and Next Date for each of the Daily record from the OLTP. Filter out the records which have Conversion Rate same as Previous Rates or if the Conversion Date lies within a single day range. Mark the records as ‘Keep’ and ‘Filter’ and also get the final End Date for the single Range record (Unique Combination of From Date, To Date, Rate and Conversion Date). Filter the records marked as ‘Filter’ in the INFA map. The above steps will load W_EXCH_RATE_GS. Step 0 updates/deletes W_EXCH_RATE_G directly. SIL map will then insert/update the GS data into W_EXCH_RATE_G. These steps convert the daily records in GL_DAILY_RATES to Range records in W_EXCH_RATE_G. We do not need such special logic for loading W_GLOBAL_EXCH_RATE_G. This is a table where we store data at a Daily Granular Level. However we need to pivot the data because the data present in multiple rows in source tables needs to be stored in different columns of the same row in DW. We use GROUP BY and CASE logic to achieve this. Fusion: Fusion has extraction logic very similar to EBS. The only difference is that the Cleanup logic that was mentioned in step 0 above does not use $$XRATE_UPD_NUM_DAY parameter. In Fusion we bring all the Exchange Rates in Incremental as well and do the cleanup. The SIL then takes care of Insert/Updates accordingly. PeopleSoft:PeopleSoft does not have From Date and To Date explicitly in the Source tables. Let’s look at an example. Please note that this is achieved from PS1 onwards only. 1 Jan 2010 – USD to INR – 45 31 Jan 2010 – USD to INR – 46 PSFT stores records in above fashion. This means that Exchange Rate of 45 for USD to INR is applicable for 1 Jan 2010 to 30 Jan 2010. We need to store data in this fashion in DW. Also PSFT has Exchange Rate stored as RATE_MULT and RATE_DIV. We need to do a RATE_MULT/RATE_DIV to get the correct Exchange Rate. We generate From Date and To Date while extracting data from source and this has certain assumptions: If a record gets updated/inserted in the source, it will be extracted in incremental. Also if this updated/inserted record is between other dates, then we also extract the preceding and succeeding records (based on dates) of this record. This is required because we need to generate a range record and we have 3 records whose ranges have changed. Taking the same example as above, if there is a new record which gets inserted on 15 Jan 2010; the new ranges are 1 Jan to 14 Jan, 15 Jan to 30 Jan and 31 Jan to Next available date. Even though 1 Jan record and 31 Jan have not changed, we will still extract them because the range is affected. Similar logic is used for Global Exchange Rate Extraction. We create the Range records and get it into a Temporary table. Then we join to Day Dimension, create individual records and pivot the data to get the 5 Global Exchange Rates for each From Currency, Date and Rate Type. Siebel: Siebel Facts are dependent on Global Exchange Rates heavily and almost none of them really use individual Exchange Rates. In other words, W_GLOBAL_EXCH_RATE_G is the main table used in Siebel from PS1 release onwards. As of January 2002, the Euro Triangulation method for converting between currencies belonging to EMU members is not needed for present and future currency exchanges. However, the method is still available in Siebel applications, as are the old currencies, so that historical data can be maintained accurately. The following description applies only to historical data needing conversion prior to the 2002 switch to the Euro for the EMU member countries. If a country is a member of the European Monetary Union (EMU), you should convert its currency to other currencies through the Euro. This is called triangulation, and it is used whenever either currency being converted has EMU Triangulation checked. Due to this, there are multiple extraction flows in SEBL ie. EUR to EMU, EUR to NonEMU, EUR to DMC and so on. We load W_EXCH_RATE_G through multiple flows with these data. This has been kept same as previous versions of OBIA. W_GLOBAL_EXCH_RATE_G being a new table does not have such needs. However SEBL does not have From Date and To Date columns in the Source tables similar to PSFT. We use similar extraction logic as explained in PSFT section for SEBL as well. What if all 5 Global Currencies configured are same? As mentioned in previous sections, from PS1 onwards we store Global Exchange Rates in W_GLOBAL_EXCH_RATE_G table. The extraction logic for this table involves Pivoting data from multiple rows into a single row with 5 Global Exchange Rates in 5 columns. As mentioned in previous sections, we use CASE and GROUP BY functions to achieve this. This approach poses a unique problem when all the 5 Global Currencies Chosen are same. For example – If the user configures all 5 Global Currencies as ‘USD’ then the extract logic will not be able to generate a record for From Currency=USD. This is because, not all Source Systems will have a USD->USD conversion record. We have _Generated mappings to take care of this case. We generate a record with Conversion Rate=1 for such cases. Reusable Lookups Before PS1, we had a Mapplet for Currency Conversions. In PS1, we only have reusable Lookups- LKP_W_EXCH_RATE_G and LKP_W_GLOBAL_EXCH_RATE_G. These lookups have another layer of logic so that all the lookup conditions are met when they are used in various Fact Mappings. Any user who would want to do a LKP on W_EXCH_RATE_G or W_GLOBAL_EXCH_RATE_G should and must use these Lookups. A direct join or Lookup on the tables might lead to wrong data being returned. Changing Currency preferences in the Dashboard: In the 796x series, all amount metrics in OBIA were showing the Global1 amount. The customer needed to change the metric definitions to show them in another Currency preference. Project Analytics started supporting currency preferences since 7.9.6 release though, and it published a Tech note for other module customers to add toggling between currency preferences to the solution. List of Currency Preferences Starting from 11.1.1.x release, the BI Platform added a new feature to support multiple currencies. The new session variable (PREFERRED_CURRENCY) is populated through a newly introduced currency prompt. This prompt can take its values from the xml file: userpref_currencies_OBIA.xml, which is hosted in the BI Server installation folder, under :< home>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\userpref_currencies.xml This file contains the list of currency preferences, like“Local Currency”, “Global Currency 1”,…which customers can also rename to give them more meaningful business names. There are two options for showing the list of currency preferences to the user in the dashboard: Static and Dynamic. In Static mode, all users will see the full list as in the user preference currencies file. In the Dynamic mode, the list shown in the currency prompt drop down is a result of a dynamic query specified in the same file. Customers can build some security into the rpd, so the list of currency preferences will be based on the user roles…BI Applications built a subject area: “Dynamic Currency Preference” to run this query, and give every user only the list of currency preferences required by his application roles. Adding Currency to an Amount Field When the user selects one of the items from the currency prompt, all the amounts in that page will show in the Currency corresponding to that preference. For example, if the user selects “Global Currency1” from the prompt, all data will be showing in Global Currency 1 as specified in the Configuration Manager. If the user select “Local Currency”, all amount fields will show in the Currency of the Business Unit selected in the BU filter of the same page. If there is no particular Business Unit selected in that filter, and the data selected by the query contains amounts in more than one currency (for example one BU has USD as a functional currency, the other has EUR as functional currency), then subtotals will not be available (cannot add USD and EUR amounts in one field), and depending on the set up (see next paragraph), the user may receive an error. There are two ways to add the Currency field to an amount metric: In the form of currency code, like USD, EUR…For this the user needs to add the field “Apps Common Currency Code” to the report. This field is in every subject area, usually under the table “Currency Tag” or “Currency Code”… In the form of currency symbol ($ for USD, € for EUR,…) For this, the user needs to format the amount metrics in the report as a currency column, by specifying the currency tag column in the Column Properties option in Column Actions drop down list. Typically this column should be the “BI Common Currency Code” available in every subject area. Select Column Properties option in the Edit list of a metric. In the Data Format tab, select Custom as Treat Number As. Enter the following syntax under Custom Number Format: [$:currencyTagColumn=Subjectarea.table.column] Where Column is the “BI Common Currency Code” defined to take the currency code value based on the currency preference chosen by the user in the Currency preference prompt.

  Read the article

• Issues with signal handling [closed]

  - by user34790

  I am trying to actually study the signal handling behavior in multiprocess system. I have a system where there are three signal generating processes generating signals of type SIGUSR1 and SIGUSR1. I have two handler processes that handle a particular type of signal. I have another monitoring process that also receives the signals and then does its work. I have a certain issue. Whenever my signal handling processes generate a signal of a particular type, it is sent to the process group so it is received by the signal handling processes as well as the monitoring processes. Whenever the signal handlers of monitoring and signal handling processes are called, I have printed to indicate the signal handling. I was expecting a uniform series of calls for the signal handlers of the monitoring and handling processes. However, looking at the output I could see like at the beginning the monitoring and signal handling processes's signal handlers are called uniformly. However, after I could see like signal handler processes handlers being called in a burst followed by the signal handler of monitoring process being called in a burst. Here is my code and output #include <iostream> #include <sys/types.h> #include <sys/wait.h> #include <sys/time.h> #include <signal.h> #include <cstdio> #include <stdlib.h> #include <sys/ipc.h> #include <sys/shm.h> #define NUM_SENDER_PROCESSES 3 #define NUM_HANDLER_PROCESSES 4 #define NUM_SIGNAL_REPORT 10 #define MAX_SIGNAL_COUNT 100000 using namespace std; volatile int *usrsig1_handler_count; volatile int *usrsig2_handler_count; volatile int *usrsig1_sender_count; volatile int *usrsig2_sender_count; volatile int *lock_1; volatile int *lock_2; volatile int *lock_3; volatile int *lock_4; volatile int *lock_5; volatile int *lock_6; //Used only by the monitoring process volatile int monitor_count; volatile int usrsig1_monitor_count; volatile int usrsig2_monitor_count; double time_1[NUM_SIGNAL_REPORT]; double time_2[NUM_SIGNAL_REPORT]; //Used only by the main process int total_signal_count; //For shared memory int shmid; const int shareSize = sizeof(int) * (10); double timestamp() { struct timeval tp; gettimeofday(&tp, NULL); return (double)tp.tv_sec + tp.tv_usec / 1000000.; } pid_t senders[NUM_SENDER_PROCESSES]; pid_t handlers[NUM_HANDLER_PROCESSES]; pid_t reporter; void signal_catcher_1(int); void signal_catcher_2(int); void signal_catcher_int(int); void signal_catcher_monitor(int); void signal_catcher_main(int); void terminate_processes() { //Kill the child processes int status; cout << "Time up terminating the child processes" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); //Wait for the child processes to finish for(int i=0; i<NUM_SENDER_PROCESSES; i++) { waitpid(senders[i], &status, 0); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { waitpid(handlers[i], &status, 0); } waitpid(reporter, &status, 0); } int main(int argc, char *argv[]) { if(argc != 2) { cout << "Required parameters missing. " << endl; cout << "Option 1 = 1 which means run for 30 seconds" << endl; cout << "Option 2 = 2 which means run until 100000 signals" << endl; exit(0); } int option = atoi(argv[1]); pid_t pid; if(option == 2) { if(signal(SIGUSR1, signal_catcher_main) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, signal_catcher_main) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } if(signal(SIGINT, signal_catcher_int) == SIG_ERR) { perror("3"); exit(1); } /////////////////////////////////////////////////////////////////////////////////////// ////////////////////// Initializing the shared memory ///////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////// cout << "Initializing the shared memory" << endl; if ((shmid=shmget(IPC_PRIVATE,shareSize,IPC_CREAT|0660))< 0) { perror("shmget fail"); exit(1); } usrsig1_handler_count = (int *) shmat(shmid, NULL, 0); usrsig2_handler_count = usrsig1_handler_count + 1; usrsig1_sender_count = usrsig2_handler_count + 1; usrsig2_sender_count = usrsig1_sender_count + 1; lock_1 = usrsig2_sender_count + 1; lock_2 = lock_1 + 1; lock_3 = lock_2 + 1; lock_4 = lock_3 + 1; lock_5 = lock_4 + 1; lock_6 = lock_5 + 1; //Initialize them to be zero *usrsig1_handler_count = 0; *usrsig2_handler_count = 0; *usrsig1_sender_count = 0; *usrsig2_sender_count = 0; *lock_1 = 0; *lock_2 = 0; *lock_3 = 0; *lock_4 = 0; *lock_5 = 0; *lock_6 = 0; cout << "End of initializing the shared memory" << endl; ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////// End of initializing the shared memory /////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////Registering the signal handlers/////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal handlers" << endl; for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { if((pid = fork()) == 0) { if(i%2 == 0) { struct sigaction action; action.sa_handler = signal_catcher_1; sigset_t block_mask; action.sa_flags = 0; sigaction(SIGUSR1,&action,NULL); if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1 ,SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } struct sigaction action; action.sa_handler = signal_catcher_2; action.sa_flags = 0; sigaction(SIGUSR2,&action,NULL); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { //cout << "Registerd the handler " << pid << endl; handlers[i] = pid; } } cout << "End of registering the signal handlers" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////End of registering the signal handlers ////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// ///////////////////////////Registering the monitoring process ////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the monitoring process" << endl; if((pid = fork()) == 0) { struct sigaction action; action.sa_handler = signal_catcher_monitor; sigemptyset(&action.sa_mask); sigset_t block_mask; sigemptyset(&block_mask); sigaddset(&block_mask,SIGUSR1); sigaddset(&block_mask,SIGUSR2); action.sa_flags = 0; action.sa_mask = block_mask; sigaction(SIGUSR1,&action,NULL); sigaction(SIGUSR2,&action,NULL); if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { cout << "Monitor's pid is " << pid << endl; reporter = pid; } cout << "End of registering the monitoring process" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////End of registering the monitoring process//////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Sleep to make sure that the monitor and handler processes are well initialized and ready to handle signals sleep(5); ////////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////Registering the signal generators/////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal generators" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { if((pid = fork()) == 0) { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } srand(i); while(true) { int signal_id = rand()%2 + 1; if(signal_id == 1) { killpg(getpgid(getpid()), SIGUSR1); while(__sync_lock_test_and_set(lock_4,1) != 0) { } (*usrsig1_sender_count)++; *lock_4 = 0; } else { killpg(getpgid(getpid()), SIGUSR2); while(__sync_lock_test_and_set(lock_5,1) != 0) { } (*usrsig2_sender_count)++; *lock_5=0; } int r = rand()%10 + 1; double s = (double)r/100; sleep(s); } exit(0); } else { //cout << "Registered the sender " << pid << endl; senders[i] = pid; } } //cout << "End of registering the signal generators" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////End of registering the signal generators/////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Either sleep for 30 seconds and terminate the program or if the number of signals generated reaches 10000, terminate the program if(option = 1) { sleep(90); terminate_processes(); } else { while(true) { if(total_signal_count >= MAX_SIGNAL_COUNT) { terminate_processes(); } else { sleep(0.001); } } } } void signal_catcher_1(int the_sig) { while(__sync_lock_test_and_set(lock_1,1) != 0) { } (*usrsig1_handler_count) = (*usrsig1_handler_count) + 1; cout << "Signal Handler 1 " << *usrsig1_handler_count << endl; __sync_lock_release(lock_1); } void signal_catcher_2(int the_sig) { while(__sync_lock_test_and_set(lock_2,1) != 0) { } (*usrsig2_handler_count) = (*usrsig2_handler_count) + 1; __sync_lock_release(lock_2); } void signal_catcher_main(int the_sig) { while(__sync_lock_test_and_set(lock_6,1) != 0) { } total_signal_count++; *lock_6 = 0; } void signal_catcher_int(int the_sig) { for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); exit(3); } void signal_catcher_monitor(int the_sig) { cout << "Monitoring process " << *usrsig1_handler_count << endl; } Here is the initial segment of output Monitoring process 0 Monitoring process 0 Monitoring process 0 Monitoring process 0 Signal Handler 1 1 Monitoring process 2 Signal Handler 1 2 Signal Handler 1 3 Signal Handler 1 4 Monitoring process 4 Monitoring process Signal Handler 1 6 Signal Handler 1 7 Monitoring process 7 Monitoring process 8 Monitoring process 8 Signal Handler 1 9 Monitoring process 9 Monitoring process 9 Monitoring process 10 Signal Handler 1 11 Monitoring process 11 Monitoring process 12 Signal Handler 1 13 Signal Handler 1 14 Signal Handler 1 15 Signal Handler 1 16 Signal Handler 1 17 Signal Handler 1 18 Monitoring process 19 Signal Handler 1 20 Monitoring process 20 Signal Handler 1 21 Monitoring process 21 Monitoring process 21 Monitoring process 22 Monitoring process 22 Monitoring process 23 Signal Handler 1 24 Signal Handler 1 25 Monitoring process 25 Signal Handler 1 27 Signal Handler 1 28 Signal Handler 1 29 Here is the segment when the signal handler processes signal handlers are called in a burst Signal Handler 1 456 Signal Handler 1 457 Signal Handler 1 458 Signal Handler 1 459 Signal Handler 1 460 Signal Handler 1 461 Signal Handler 1 462 Signal Handler 1 463 Signal Handler 1 464 Signal Handler 1 465 Signal Handler 1 466 Signal Handler 1 467 Signal Handler 1 468 Signal Handler 1 469 Signal Handler 1 470 Signal Handler 1 471 Signal Handler 1 472 Signal Handler 1 473 Signal Handler 1 474 Signal Handler 1 475 Signal Handler 1 476 Signal Handler 1 477 Signal Handler 1 478 Signal Handler 1 479 Signal Handler 1 480 Signal Handler 1 481 Signal Handler 1 482 Signal Handler 1 483 Signal Handler 1 484 Signal Handler 1 485 Signal Handler 1 486 Signal Handler 1 487 Signal Handler 1 488 Signal Handler 1 489 Signal Handler 1 490 Signal Handler 1 491 Signal Handler 1 492 Signal Handler 1 493 Signal Handler 1 494 Signal Handler 1 495 Signal Handler 1 496 Signal Handler 1 497 Signal Handler 1 498 Signal Handler 1 499 Signal Handler 1 500 Signal Handler 1 501 Signal Handler 1 502 Signal Handler 1 503 Signal Handler 1 504 Signal Handler 1 505 Signal Handler 1 506 Here is the segment when the monitoring processes signal handlers are called in a burst Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Why isn't it uniform afterwards. Why are they called in a burst?

  Read the article

• Problems with capture TV card

  - by user8270

  Hi, I have a TV card that I have not managed to install with Ubuntu 10.10 i386. I have tried various topics in various forums and I could not install it. I hope you can help me to install it thank you. lspci 01:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) dmesg [10299.516344] saa7134 ALSA driver for DMA sound unloaded [11385.340661] Linux video capture interface: v2.00 [11385.384278] saa7130/34: v4l2 driver version 0.2.16 loaded [11385.384390] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [11385.384403] saa7130[0]: subsystem: 1131:0000, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [11385.384412] saa7130[0]: can't get MMIO memory @ 0x0 [11385.384431] saa7134: probe of 0000:01:07.0 failed with error -16 [11385.401174] saa7134 ALSA driver for DMA sound loaded [11385.401182] saa7134 ALSA: no saa7134 cards found [11477.797019] tvtime[12534]: segfault at 6b0 ip 0804cf64 sp bf928a4c error 4 in tvtime[8048000+76000] [11626.141821] tvtime[12549]: segfault at 6b0 ip 0804cf64 sp bfec357c error 4 in tvtime[8048000+76000] [12218.120632] saa7134 ALSA driver for DMA sound unloaded [12464.993061] Linux video capture interface: v2.00 [12465.028285] saa7130/34: v4l2 driver version 0.2.16 loaded [12465.028392] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [12465.028404] saa7134: <rant> [12465.028406] saa7134: Congratulations! Your TV card vendor saved a few [12465.028408] saa7134: cents for a eeprom, thus your pci board has no [12465.028411] saa7134: subsystem ID and I can't identify it automatically [12465.028414] saa7134: </rant> [12465.028416] saa7134: I feel better now. Ok, here are the good news: [12465.028418] saa7134: You can use the card=<nr> insmod option to specify [12465.028421] saa7134: which board do you have. The list: [12465.028428] saa7134: card=0 -> UNKNOWN/GENERIC [12465.028435] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001 [12465.028447] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138 [12465.028457] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138 [12465.028467] saa7134: card=4 -> EMPRESS 1131:6752 [12465.028475] saa7134: card=5 -> SKNet Monster TV 1131:4e85 [12465.028484] saa7134: card=6 -> Tevion MD 9717 [12465.028491] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01 [12465.028501] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142 [12465.028510] saa7134: card=9 -> Medion 5044 [12465.028517] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI [12465.028523] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143 [12465.028532] saa7134: card=12 -> Medion 7134 16be:0003 16be:5000 [12465.028542] saa7134: card=13 -> Typhoon TV+Radio 90031 [12465.028548] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b [12465.028557] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a [12465.028565] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840 [12465.028576] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133 [12465.028585] saa7134: card=18 -> BMK MPEX No Tuner [12465.028592] saa7134: card=19 -> Compro VideoMate TV 185b:c100 [12465.028600] saa7134: card=20 -> Matrox CronosPlus 102b:48d0 [12465.028608] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001 [12465.028617] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b [12465.028625] saa7134: card=23 -> BMK MPEX Tuner [12465.028632] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006 [12465.028640] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843 [12465.028648] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b [12465.028657] saa7134: card=27 -> Manli MuchTV M-TV002 [12465.028663] saa7134: card=28 -> Manli MuchTV M-TV001 [12465.028670] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c [12465.028679] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4 [12465.028687] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5 [12465.028695] saa7134: card=32 -> AVACS SmartTV [12465.028702] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff [12465.028710] saa7134: card=34 -> Noval Prime TV 7133 [12465.028717] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115 [12465.028725] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800 [12465.028734] saa7134: card=37 -> Items MuchTV Plus / IT-005 [12465.028740] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152 [12465.028749] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212 5169:1502 [12465.028760] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100 [12465.028768] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100 [12465.028776] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130) [12465.028783] saa7134: card=43 -> :Zolid Xpert TV7134 [12465.028790] saa7134: card=44 -> Empire PCI TV-Radio LE [12465.028796] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715 [12465.028805] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee [12465.028813] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162 [12465.028821] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158 [12465.028830] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200 [12465.028838] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d [12465.028847] saa7134: card=51 -> ProVideo PV952 1540:9524 [12465.028855] saa7134: card=52 -> AverMedia AverTV/305 1461:2108 [12465.028863] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845 [12465.028871] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 5168:5214 1489:0214 5168:0304 [12465.028884] saa7134: card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306 [12465.028894] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a [12465.028903] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f [12465.028911] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370 [12465.028924] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 [12465.028931] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502 [12465.028942] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004 [12465.028951] saa7134: card=62 -> Compro VideoMate TV Gold+II [12465.028958] saa7134: card=63 -> Kworld Xpert TV PVR7134 [12465.028964] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210 [12465.028973] saa7134: card=65 -> V-Stream Studio TV Terminator [12465.028980] saa7134: card=66 -> Yuan TUN-900 (saa7135) [12465.028986] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091 [12465.028995] saa7134: card=68 -> GoTView 7135 PCI 5456:7135 [12465.029003] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004 [12465.029011] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900 [12465.029020] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901 [12465.029028] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350 [12465.029036] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330 [12465.029045] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212 [12465.029053] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044 [12465.029062] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9 [12465.029070] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e [12465.029078] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 [12465.029087] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO [12465.029094] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210 [12465.029102] saa7134: card=81 -> Philips Tiger reference design 1131:2018 [12465.029110] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231 1462:8624 [12465.029120] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160 [12465.029128] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319 [12465.029137] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05 [12465.029147] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301 [12465.029156] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421 [12465.029165] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201 [12465.029173] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c [12465.029182] saa7134: card=90 -> Kworld ATSC110/115 17de:7350 17de:7352 [12465.029191] saa7134: card=91 -> AVerMedia A169 B 1461:7360 [12465.029200] saa7134: card=92 -> AVerMedia A169 B1 1461:6360 [12465.029208] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005 [12465.029216] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV 5168:3306 5168:3502 5168:3307 4e42:3502 [12465.029229] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138 [12465.029238] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008 16be:000d [12465.029249] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300 [12465.029259] saa7134: card=98 -> Proteus Pro 2309 0919:2003 [12465.029267] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00 [12465.029276] saa7134: card=100 -> Asus Europa2 OEM 1043:4860 [12465.029284] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f [12465.029293] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715 [12465.029301] saa7134: card=103 -> Compro Videomate DVB-T200A [12465.029308] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705 [12465.029324] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172 [12465.029332] saa7134: card=106 -> Encore ENLTV 1131:2342 1131:2341 3016:2344 [12465.029344] saa7134: card=107 -> Encore ENLTV-FM 1131:230f [12465.029352] saa7134: card=108 -> Terratec Cinergy HT PCI 153b:1175 [12465.029360] saa7134: card=109 -> Philips Tiger - S Reference design [12465.029367] saa7134: card=110 -> Avermedia M102 1461:f31e [12465.029375] saa7134: card=111 -> ASUS P7131 4871 1043:4871 [12465.029384] saa7134: card=112 -> ASUSTeK P7131 Hybrid 1043:4876 [12465.029392] saa7134: card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card 1019:4cb6 [12465.029401] saa7134: card=114 -> KWorld DVB-T 210 17de:7250 [12465.029409] saa7134: card=115 -> Sabrent PCMCIA TV-PCB05 0919:2003 [12465.029418] saa7134: card=116 -> 10MOONS TM300 TV Card 1131:2304 [12465.029426] saa7134: card=117 -> Avermedia Super 007 1461:f01d [12465.029435] saa7134: card=118 -> Beholder BeholdTV 401 0000:4016 [12465.029443] saa7134: card=119 -> Beholder BeholdTV 403 0000:4036 [12465.029451] saa7134: card=120 -> Beholder BeholdTV 403 FM 0000:4037 [12465.029459] saa7134: card=121 -> Beholder BeholdTV 405 0000:4050 [12465.029468] saa7134: card=122 -> Beholder BeholdTV 405 FM 0000:4051 [12465.029476] saa7134: card=123 -> Beholder BeholdTV 407 0000:4070 [12465.029484] saa7134: card=124 -> Beholder BeholdTV 407 FM 0000:4071 [12465.029493] saa7134: card=125 -> Beholder BeholdTV 409 0000:4090 [12465.029501] saa7134: card=126 -> Beholder BeholdTV 505 FM 5ace:5050 [12465.029510] saa7134: card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509 5ace:5070 5ace:5090 [12465.029520] saa7134: card=128 -> Beholder BeholdTV Columbus TVFM 0000:5201 [12465.029528] saa7134: card=129 -> Beholder BeholdTV 607 FM 5ace:6070 [12465.029537] saa7134: card=130 -> Beholder BeholdTV M6 5ace:6190 [12465.029545] saa7134: card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 [12465.029554] saa7134: card=132 -> Genius TVGO AM11MCE [12465.029560] saa7134: card=133 -> NXP Snake DVB-S reference design [12465.029567] saa7134: card=134 -> Medion/Creatix CTX953 Hybrid 16be:0010 [12465.029576] saa7134: card=135 -> MSI TV@nywhere A/D v1.1 1462:8625 [12465.029584] saa7134: card=136 -> AVerMedia Cardbus TV/Radio (E506R) 1461:f436 [12465.029592] saa7134: card=137 -> AVerMedia Hybrid TV/Radio (A16D) 1461:f936 [12465.029601] saa7134: card=138 -> Avermedia M115 1461:a836 [12465.029609] saa7134: card=139 -> Compro VideoMate T750 185b:c900 [12465.029617] saa7134: card=140 -> Avermedia DVB-S Pro A700 1461:a7a1 [12465.029626] saa7134: card=141 -> Avermedia DVB-S Hybrid+FM A700 1461:a7a2 [12465.029634] saa7134: card=142 -> Beholder BeholdTV H6 5ace:6290 [12465.029642] saa7134: card=143 -> Beholder BeholdTV M63 5ace:6191 [12465.029651] saa7134: card=144 -> Beholder BeholdTV M6 Extra 5ace:6193 [12465.029659] saa7134: card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636 1461:f736 [12465.029669] saa7134: card=146 -> ASUSTeK P7131 Analog [12465.029676] saa7134: card=147 -> Asus Tiger 3in1 1043:4878 [12465.029684] saa7134: card=148 -> Encore ENLTV-FM v5.3 1a7f:2008 [12465.029693] saa7134: card=149 -> Avermedia PCI pure analog (M135A) 1461:f11d [12465.029701] saa7134: card=150 -> Zogis Real Angel 220 [12465.029708] saa7134: card=151 -> ADS Tech Instant HDTV 1421:0380 [12465.029716] saa7134: card=152 -> Asus Tiger Rev:1.00 1043:4857 [12465.029725] saa7134: card=153 -> Kworld Plus TV Analog Lite PCI 17de:7128 [12465.029733] saa7134: card=154 -> Avermedia AVerTV GO 007 FM Plus 1461:f31d [12465.029742] saa7134: card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706 0070:6708 [12465.029752] saa7134: card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707 0070:6709 0070:670a [12465.029763] saa7134: card=157 -> Avermedia AVerTV Studio 507UA 1461:a11b [12465.029772] saa7134: card=158 -> AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 [12465.029780] saa7134: card=159 -> Beholder BeholdTV 505 RDS 0000:505b [12465.029789] saa7134: card=160 -> Beholder BeholdTV 507 RDS 0000:5071 [12465.029797] saa7134: card=161 -> Beholder BeholdTV 507 RDS 0000:507b [12465.029806] saa7134: card=162 -> Beholder BeholdTV 607 FM 5ace:6071 [12465.029815] saa7134: card=163 -> Beholder BeholdTV 609 FM 5ace:6090 [12465.029823] saa7134: card=164 -> Beholder BeholdTV 609 FM 5ace:6091 [12465.029832] saa7134: card=165 -> Beholder BeholdTV 607 RDS 5ace:6072 [12465.029840] saa7134: card=166 -> Beholder BeholdTV 607 RDS 5ace:6073 [12465.029849] saa7134: card=167 -> Beholder BeholdTV 609 RDS 5ace:6092 [12465.029857] saa7134: card=168 -> Beholder BeholdTV 609 RDS 5ace:6093 [12465.029866] saa7134: card=169 -> Compro VideoMate S350/S300 185b:c900 [12465.029874] saa7134: card=170 -> AverMedia AverTV Studio 505 1461:a115 [12465.029883] saa7134: card=171 -> Beholder BeholdTV X7 5ace:7595 [12465.029892] saa7134: card=172 -> RoverMedia TV Link Pro FM 19d1:0138 [12465.029900] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI 1131:2004 [12465.029909] saa7134: card=174 -> Asus Europa Hybrid OEM 1043:4847 [12465.029917] saa7134: card=175 -> Leadtek Winfast DTV1000S 107d:6655 [12465.029926] saa7134: card=176 -> Beholder BeholdTV 505 RDS 0000:5051 [12465.029934] saa7134: card=177 -> Hawell HW-404M7 [12465.029941] saa7134: card=178 -> Beholder BeholdTV H7 [12465.029948] saa7134: card=179 -> Beholder BeholdTV A7 [12465.029955] saa7134: card=180 -> Avermedia PCI M733A 1461:4155 1461:4255 [12465.029967] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] [12465.030033] saa7130[0]: can't get MMIO memory @ 0x0 [12465.030051] saa7134: probe of 0000:01:07.0 failed with error -16 [12465.053892] saa7134 ALSA driver for DMA sound loaded [12465.053900] saa7134 ALSA: no saa7134 cards found tvtime-scanner Leyendo la configuración de /etc/tvtime/tvtime.xml Leyendo la configuración de /home/ricardo/.tvtime/tvtime.xml Escaneando usando la norma de TV NTSC. /home/ricardo/.tvtime/stationlist.xml: No existing NTSC station list "Custom". videoinput: Cannot open capture device /dev/video0: No existe el dispositivo o la dirección ls /dev/ No video directory here

  Read the article

• How Exactly Is One Linux OS “Based On” Another Linux OS?

  - by Jason Fitzpatrick

  When reviewing different flavors of Linux, you’ll frequently come across phrases like “Ubuntu is based on Debian” but what exactly does that mean? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader PLPiper is trying to get a handle on how Linux variants work: I’ve been looking through quite a number of Linux distros recently to get an idea of what’s around, and one phrase that keeps coming up is that “[this OS] is based on [another OS]“. For example: Fedora is based on Red Hat Ubuntu is based on Debian Linux Mint is based on Ubuntu For someone coming from a Mac environment I understand how “OS X is based on Darwin”, however when I look at Linux Distros, I find myself asking “Aren’t they all based on Linux..?” In this context, what exactly does it mean for one Linux OS to be based on another Linux OS? So, what exactly does it mean when we talk about one version of Linux being based off another version? The Answer SuperUser contributor kostix offers a solid overview of the whole system: Linux is a kernel — a (complex) piece of software which works with the hardware and exports a certain Application Programming Interface (API), and binary conventions on how to precisely use it (Application Binary Interface, ABI) available to the “user-space” applications. Debian, RedHat and others are operating systems — complete software environments which consist of the kernel and a set of user-space programs which make the computer useful as they perform sensible tasks (sending/receiving mail, allowing you to browse the Internet, driving a robot etc). Now each such OS, while providing mostly the same software (there are not so many free mail server programs or Internet browsers or desktop environments, for example) differ in approaches to do this and also in their stated goals and release cycles. Quite typically these OSes are called “distributions”. This is, IMO, a somewhat wrong term stemming from the fact you’re technically able to build all the required software by hand and install it on a target machine, so these OSes distribute the packaged software so you either don’t need to build it (Debian, RedHat) or they facilitate such building (Gentoo). They also usually provide an installer which helps to install the OS onto a target machine. Making and supporting an OS is a very complicated task requiring a complex and intricate infrastructure (upload queues, build servers, a bug tracker, and archive servers, mailing list software etc etc etc) and staff. This obviously raises a high barrier for creating a new, from-scratch OS. For instance, Debian provides ca. 37k packages for some five hardware architectures — go figure how much work is put into supporting this stuff. Still, if someone thinks they need to create a new OS for whatever reason, it may be a good idea to use an existing foundation to build on. And this is exactly where OSes based on other OSes come into existence. For instance, Ubuntu builds upon Debian by just importing most packages from it and repackaging only a small subset of them, plus packaging their own, providing their own artwork, default settings, documentation etc. Note that there are variations to this “based on” thing. For instance, Debian fosters the creation of “pure blends” of itself: distributions which use Debian rather directly, and just add a bunch of packages and other stuff only useful for rather small groups of users such as those working in education or medicine or music industry etc. Another twist is that not all these OSes are based on Linux. For instance, Debian also provide FreeBSD and Hurd kernels. They have quite tiny user groups but anyway. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• CodePlex Daily Summary for Friday, March 23, 2012

  CodePlex Daily Summary for Friday, March 23, 2012Popular ReleasesSSIS Multiple Hash: Multiple Hash V1.4.1: This is a feature release. It adds the ability to select multiple rows, and change the selection of these with a single click in the check box. All lists with check boxes have this ability. It is backwards compatible with previous versions. Please ensure that you select the appropriate download file based on the version of SQL Server that you will be using. If you have used the Denali installer from V1.4 for packages that you wish to now use the SQL 2012 release version, then you MUST ma...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMetodología General Ajustada - MGA: 02.02.02: Cambios John: Cambios en los cálculos del Flujo de Caja, Flujo Económico y Resumen EF y ES. Se visualiza el reporte de Resumen EF y ES en Grilla. Se ajustan formularios de llamado. Cambios Parmenio: Cambios en el formularios de Programaciòn.MapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Telerik CAB Enabling Kit for RadControls for WinForms: TCEK 2012.1.321.20: major update, new Workspaces and UIAdapters Workspaces: - RadDockWorkspace - RadPageViewWorkspace - RadFormWorkspace - RadFormMdiWorkspace - RadTabbedMdiWorkspace UI Adapters: - RadCommandBarUIAdapter - RadRibbonBarUIAdapter - RadTreeNodeUiAdapter - RadTreeViewUIAdapter - RadItemCollectionUIAdapter - (RadMenu, RadStatusStrip, all controls that support RadItem collections)Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTAppBarUtils for Windows Phone SDK 7.1: AppBarUtils 1.2: This release contains IconUri dependency property for both AppBarItemCommand and AppBarItemTrigger as requested by shawnoster at http://appbarutils.codeplex.com/discussions/321745. When using this IconUri dependency property, please be sure to set the Type property to AppBarItemType.Button or just omit this property entirely, because it is only for app bar icon button. The demo has been updated to show how to use this new IconUri dependency property with a new lock button on the app bar. Wh...Offline Navigation for Windows Phone 7: 0.1 Alpha: This is the 0.1 alpha release of source code.SmartNet: V1.0.0.0: DY SmartNet ?????? V1.0New Projects2Sexy Content for DotNetNuke - great looking and animated content: 2Sexy Content is a DotNetNuke Extension to create attractive and designed content. It solves the common problem, allowing the web designer to create designed templates for different content elements, so that the user must only fill in fields and receive a perfectly designed and animated output. AgileMapper: AgileMapper????????????????????，?????????dto?do???????AksiMata: Berita terbaru dan peristiwa terkini di sekitar Anda... Langsung dari TKP!Caprice: Engineering adaptive privacy: Caprice is a tool aimed at supporting software engineers in the design of applications that appropriately adapt their behaviour to mitigate privacy threats. This tool helps provide software engineers design-time insight on the functional behaviour a system and associated runtime context changes that can threaten privacy.Change default Share-site group SharePoint Online (Office 365): As default when we share a site collection or site with external users, SharePoint Online show default SharePoint groups which are Visitors and Members. By using this feature, you will get a link which you can use to customize the default groups to your custom groups and other default groups. CodePlex Test Project: This is just to test how well CodePlex handles Git.Find Work Items For Source Items (Visual Studio Extension): work4source is a Visual Studio 2010 tool window which finds and lists all TFS work items associated with a specific source control file or folder, avoiding the need to view the details for every changeset. It also includes "versioned item" links which otherwise cannot be found from the source side of the link using Visual Studio. To install run the VSIX package, restart Visual Studio, then select View --> Other Windows --> "Find Work Items for Source Items" and either leave the window ...FSProject: FSProjectGit c9 Test: testing git to c9 integration possibilitiesImage 3D Viewer: A Image 3D Viewer with WPF.Jakarta Guide: Jakarta news featuring up-to-date information on attractions, hotels, restaurants, nightlife, travel tips and more.LinqLucene: Due to the fact to the original LinqToLucene project seems to have died, I have created this new project to carry on it's workLuskyCode: Just some codemaouidatest: testMarktplace: NLocalize MarketplaceMemoryLifter: MemoryLifter - the fastest way to memorize * is a virtual flashcard system, scientifically based on the Leitner card box algorithm * enables the user to lift any kind of information into long term memory * maximizes study efficiency with automation, controlled repetitionMemoryTributary - A replacement for MemoryStream: MemoryTributary is a replacement for MemoryStream that uses multiple memory chunks as its backing store, as opposed to the single byte array used by MemoryStream. The result is it can handle much larger streams and the initial allocations are more efficient. It's developed in C#.my career muse: Project configured for simultaneous use with other developersMyMusicBox: Mini-Projet MBDS Web 2.0 Michel BuffaNucleo.NET ORM: These components provide a unit of work interface that works with LINQ to SQL, Entity Framework, and Entity Framework Code First, with more ORMs to come. The idea is to create one common wrapper and base framework to make it easier to work with the various ORM products.Orchard QnA: A lightweight discussions module for the Orchard CMS.Orchard Shoutbox: A lightweight shoutbox module for the Orchard CMS:PAIN: My projects from PAIN labs, semester 2012L, department of electronics of Warsaw University of Technology.Reactifier: This project is for the windows 8 Shoutcast MediaStreamSource: Shoutcast MediaStreamSource is a MediaStreamSource implementation of the Shoutcast protocol for Silverlight. This MediaStreamSource allows both Silverlight 4+ OOB and Windows Phone 7 applications to consume a Shoutcast stream using a MediaElement. Currently, Mp3 and AAC+ Shoutcast streams are supported on Windows Phone. However, ONLY Mp3 is supported on Desktop Silverlight. There is also limited (i.e. somewhat untested) M3u and PLS playlist support. Please report any issues playing...Simple Task Manager: Politechnika Wroclawska Team Project - 2012SkyGo Media Commander: SkyGo Media Commander permette di usare le frecce della tastiera per cambiare canale e il tasto invio per aprire il menu : "Telecomando". Utile se si usa un telecomando. Perfettamente funzionante con il telecomando CIR del notebook HP DV6 2137el.sunshine Design: sunshinetesting: testing projecttesttom032012git01: testtom032012git01testtom03222012hg01: testtom03222012hg01testtom03222012tfs01: testtom03222012tfs01testtom03222012tfs02: testtom03222012tfs02TileSet Map Editor: a small side project of a tileset map editorTraffic Light Simulation Application: Traffic Light Simulation application simulates traffic on a 2D plane under different traffic light control schemes. The interface will display a 10x10 grid where each street allows one-way traffic and there is one traffic light at each intersection.Type08ScreenCapture: Type08ScreenCapture brings Windows 8-like desktop capture function to Windows 7. If you type [Windows]+[PrintScreen], it capture a main display area and save the bitmap to your picture folder. It's developed in C#/WPF.WikiPlex – a Regex Wiki Engine: A regular expression based wiki engine allowing developers to integrate a wiki experience into an existing .NET applicationWindowsQR: Windows QR is a proof of concept about capturing a qr code using a webcam in a WPF application runinng in a desktop computer with Windows 7 or similars. It uses AForge.Vision to wrap the DirectShow complexity and zxing library to decode the qr code.Working with Social Data: 1)Customizing Tag Cloud By Accountname 2)RatingWPF 3D-Model Viewer: WPF 3D-Model Viewer

  Read the article

• http request to cgi python script successful, but the script doesn't seem to run

  - by chipChocolate.py

  I have configured cgi scripts for my apache2 web server. Here is what I want to do: Client uploads the image to the server. (this already works) On success, I want to execute the python script to resize the image. I tried the following and the success function does execute but my python script does not seem to execute: Javascript code that sends the request: var input = document.getElementById('imageLoader'); imageName = input.value; var file = input.files[0]; if(file != undefined){ formData= new FormData(); console.log(formData.length); if(!!file.type.match(/image.*/)){ formData.append("image", file); $.ajax({ url: "upload.php", type: "POST", processData: false, contentType: false, success: function() { var input = document.getElementById('imageLoader'); imageName = input.value; var file = input.files[0]; formData = new FormData(); formData.append("filename", file); $.ajax({ url: "http://localhost/Main/cgi-bin/resize.py", type: "POST", data: formData, processData: false, contentType: false, success: function(data) { console.log(data); } }); // code continues... resize.py: #!/usr/bin/python import cgi import cgitb import Image cgitb.enable() data = cgi.FieldStorage() filename = data.getvalue("filename") im = Image.open("../JS/upload/" + filename) (width, height) = im.size maxWidth = 600 maxHeight = 400 if width > maxWidth: d = float(width) / maxWidth height = int(height / d) width = maxWidth if height > maxHeight: d = float(height) / maxHeight width = int(width / d) height = maxHeight size = (width, height) im = im.resize(size, Image.ANTIALIAS) im.save("../JS/upload/" + filename, quality=100) This is the apache2.conf: <Directory /var/www/html/Main/cgi-bin> AllowOverride None Options +ExecCGI SetHandler cgi-script AddHandler cgi-script .py .cgi Order allow,deny Allow from all </Directory> cgi-bin and python script file permissions: drwxrwxr-x 2 mou mou 4096 Aug 24 03:28 cgi-bin -rwxrwxrwx 1 mou mou 1673 Aug 24 03:28 resize.py Edit: Executing this code $.ajax({ url: "http://localhost/Main/cgi-bin/resize.py", type: "POST", data: formData, // formData = {"filename" : "the filename which was saved in a variable whie the image was uploaded"} processData: false, contentType: false, success: function(data) { alert(data); } }); it alerts the following: <body bgcolor="#f0f0f8"><font color="#f0f0f8" size="-5"> --> <body bgcolor="#f0f0f8"><font color="#f0f0f8" size="-5"> --> --> </font> </font> </font> </script> </object> </blockquote> </pre> </table> </table> </table> </table> </table> </font> </font> </font><body bgcolor="#f0f0f8"> <table width="100%" cellspacing=0 cellpadding=2 border=0 summary="heading"> <tr bgcolor="#6622aa"> <td valign=bottom>&nbsp;<br> <font color="#ffffff" face="helvetica, arial">&nbsp;<br><big><big><strong>&lt;type 'exceptions.TypeError'&gt;</strong></big></big></font></td ><td align=right valign=bottom ><font color="#ffffff" face="helvetica, arial">Python 2.7.6: /usr/bin/python<br>Sun Aug 24 17:24:15 2014</font></td></tr></table> <p>A problem occurred in a Python script. Here is the sequence of function calls leading up to the error, in the order they occurred.</p> <table width="100%" cellspacing=0 cellpadding=0 border=0> <tr><td bgcolor="#d8bbff"><big>&nbsp;</big><a href="file:///var/www/html/Main/cgi-bin/resize.py">/var/www/html/Main/cgi-bin/resize.py</a> in <strong><module></strong>()</td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;10</small>&nbsp;<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;11</small>&nbsp;filename&nbsp;=&nbsp;data.getvalue("filename")<br> </tt></font></td></tr> <tr><td bgcolor="#ffccee"><tt>=&gt;<small>&nbsp;&nbsp;&nbsp;12</small>&nbsp;im&nbsp;=&nbsp;Image.open("../JS/upload/"&nbsp;+&nbsp;filename)<br> </tt></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;13</small>&nbsp;<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;14</small>&nbsp;(width,&nbsp;height)&nbsp;=&nbsp;im.size<br> </tt></font></td></tr> <tr><td><small><font color="#909090">im <em>undefined</em>, <strong>Image</strong>&nbsp;= &lt;module 'Image' from '/usr/lib/python2.7/dist-packages/PILcompat/Image.pyc'&gt;, Image.<strong>open</strong>&nbsp;= &lt;function open&gt;, <strong>filename</strong>&nbsp;= '<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06\x07\x07\x06\x08\n\x10\n\n\t\t\n\x14\x0e</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>'</font></small></td></tr></table> <table width="100%" cellspacing=0 cellpadding=0 border=0> <tr><td bgcolor="#d8bbff"><big>&nbsp;</big><a href="file:///usr/lib/python2.7/dist-packages/PIL/Image.py">/usr/lib/python2.7/dist-packages/PIL/Image.py</a> in <strong>open</strong>(fp='../JS/upload/<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>', mode='r')</td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1994</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;if&nbsp;isPath(fp):<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1995</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;filename&nbsp;=&nbsp;fp<br> </tt></font></td></tr> <tr><td bgcolor="#ffccee"><tt>=&gt;<small>&nbsp;1996</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;fp&nbsp;=&nbsp;builtins.open(fp,&nbsp;"rb")<br> </tt></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1997</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;else:<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1998</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;filename&nbsp;=&nbsp;""<br> </tt></font></td></tr> <tr><td><small><font color="#909090"><strong>fp</strong>&nbsp;= '../JS/upload/<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>', <em>global</em> <strong>builtins</strong>&nbsp;= &lt;module '__builtin__' (built-in)&gt;, builtins.<strong>open</strong>&nbsp;= &lt;built-in function open&gt;</font></small></td></tr></table><p><strong>&lt;type 'exceptions.TypeError'&gt;</strong>: file() argument 1 must be encoded string without NULL bytes, not str <br><tt><small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</small>&nbsp;</tt>args&nbsp;= ('file() argument 1 must be encoded string without NULL bytes, not str',) <br><tt><small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</small>&nbsp;</tt>message&nbsp;= 'file() argument 1 must be encoded string without NULL bytes, not str' <!-- The above is a description of an error in a Python program, formatted for a Web browser because the 'cgitb' module was enabled. In case you are not reading this in a Web browser, here is the original traceback: Traceback (most recent call last): File "/var/www/html/Main/cgi-bin/resize.py", line 12, in &lt;module&gt; im = Image.open("../JS/upload/" + filename) File "/usr/lib/python2.7/dist-packages/PIL/Image.py", line 1996, in open fp = builtins.open(fp, "rb") TypeError: file() argument 1 must be encoded string without NULL bytes, not str --> Does this mean that the formData I am sending over is empty?

  Read the article

• MSCC: Global Windows Azure Bootcamp

  Mauritius participated and contributed to the Global Windows Azure Bootcamp 2014 (GWAB). Again! And this time stronger than ever, and together with 137 other locations in 56 countries world-wide. We had 62 named registrations, 7 guest additions and approximately 10 offline participants prior to the event day. Most interestingly the organisation of the GWAB through the MSCC helped to increased the number of craftsmen. The Mauritius Software Craftsmanship Community has currently 138 registered members - in less than one year! Only with those numbers we can proudly say that all the preparations and hard work towards this event already paid off. Personally, I'm really grateful that we had this kind of response and the feedback from some attendees confirmed that the MSCC is on the right track here on Cyber Island Mauritius. Inspired and motivated by the success of this event, rest assured that there will be more public events like the GWAB. This time it took some time to reflect on our meetup, following my first impression right on spot: "Wow, what an experience to organise and participate in this global event. Overall, I've been very pleased with the preparations and the event itself. Surely, there have been some nicks that we have to address and to improve for future activities like this. Quite frankly, we are not professional event organisers (not yet) but we learned a lot over the past couple of days. A big Thank You to our event sponsors, namely Microsoft Indian Ocean Islands & French Pacific, Ceridian Mauritius and Emtel. Without them this event wouldn't have happened - Thank You! And to the cool team members of Microsoft Student Partners (MSPs). You geeks did a great job! Thanks!" So, how many attendees did we actually have? 61! - Awesome - 61 cloud computing instances to help on the research of diabetes. During Saturday afternoon there was even an online publication on L'Express: Les développeurs mauriciens se joignent au combat contre le diabète Reactions of other attendees Don't take my word for granted... Here are some impressions and feedback from our participants: "Awesome event, really appreciated the presentations :-)" -- Kevin on event comments "very interesting and enriching." -- Diana on event comments "#gwab #gwabmru 2014 great success. Looking forward for gwab 2015" -- Wasiim on Twitter "Was there till the end. Awesome Event. I'll surely join upcoming meetup sessions :)" -- Luchmun on event comments "#gwabmru was not that cool. left early" -- Mohammad on Twitter The overall feedback is positive but we are absolutely aware that there quite a number of problems we had to face. We are already looking into that and ideas / action plans on how we will be able to improve it for future events. The sessions We started the day with welcoming speeches by Thierry Coret, Sr. Marketing Manager of Microsoft Indian Ocean Islands & French Pacific and Vidia Mooneegan, Managing Director and Sr. Vice President of Ceridian Mauritius. The clear emphasis was on the endless possibilities of cloud computing and how it can enable any kind of sectors here in the country. Then it was about time to set up the cloud computing services in order to contribute each attendees cloud computing resources to the global research of diabetes, a step by step guide presented by Arnaud Meslier, Technical Evangelist at Microsoft. Given a rendering package and a configuration file it was very interesting to follow the single steps in Windows Azure. Also, during the day we were not sure whether the set up had been correctly, as Mauritius didn't show up on the results board - which should have been the case after approximately 20 to 30 minutes. Anyways, let the minions work... Next, Arnaud gave a brief overview of the variety of services Windows Azure has to offer. Whether you need a development environment for your websites or mobiles app, running a virtual machine with your existing applications or simply putting a SQL database online. No worries, Windows Azure has the right packages available and the online management portal is really easy t handle. After this, we got a little bit more business oriented while Wasiim Hosenbocus, employee at Ceridian, took the attendees through the inerts of a real-life application, and demoed a couple of the existing features. He did a great job by showing how the different services of Windows Azure can be created and pulled together. After the lunch break it is always tough to keep the audience awake... And it was my turn. I gave a brief overview on operating and managing a SQL database on Windows Azure. Well, there are actually two options available and depending on your individual requirements you should be aware of both. The simpler version is called SQL Database and while provisioning only takes a couple of seconds, you should take into consideration that SQL Database has a number of constraints, like limitations on the actual database size - up to 5 GB as web edition and up to 150 GB maximum as business edition -, among others. Next, it was Chervine Bhiwoo's session on Windows Azure Mobile Services. It was absolutely amazing to see that the mobiles services directly offers you various project templates, like Windows 8 Store App, Android app, iOS app, and even Xamarin cross-platform app development. So, within a couple of minutes you can have your first mobile app active and running on Windows Azure. Furthermore, Chervine showed the attendees that adding another user interface, like Web Sites running on ASP.NET MVC 4 only takes a couple of minutes, too. And last but not least, we rounded up the day with Windows Azure Websites and hosting of Virtual Machines presented by some members of the local Microsoft Students Partners programme. Surely, one of the big advantages using Windows Azure is the availability of pre-defined installation packages of known web applications, like WordPress, Joomla!, or Ghost. Compared to running your own web site with a traditional web hoster it is surely en par, and depending on your personal level of expertise, Windows Azure provides you more liberty in terms of configuration than maybe a shared hosting environment. Running a pre-defined web application is one thing but in case that you would like to have more control over your hosting environment it is highly advised to opt for a virtual machine. Provisioning of an Ubuntu 12.04 LTS system was very simple to do but it takes some more minutes than you might expect. So, please be patient and take your time while Windows Azure gets everything in place for you. Afterwards, you can use a SecureShell (ssh) client like Putty in case of a Linux-based machine, or Remote Desktop Services when operating a Windows Server system to log in into your virtual machine. At the end of the day we had a great Q&A session and we finalised the event with our raffle of goodies. Participation in the raffle was bound to submission of the session survey and most gratefully we had a give-away for everyone. What a nice coincidence to finish of the day. Note: All session slides (and demo codes) will be made available on the MSCC event page. Please, check the Files section over there. (Some) Visual impressions from the event Just to give you an idea about what has happened during the GWAB 2014 at Ebene... Speakers and Microsoft Student Partners are getting ready for the Global Windows Azure Bootcamp 2014 GWAB 2014 attendees are fully integrated into the hands-on-labs and setting up their individuals cloud computing services 60 attendees at the GWAB 2014. Despite some technical difficulties we had a great time running the event GWAB 2014: Using the lunch break for networking and exchange of ideas - Great conversations and topics amongst attendees There are more pictures on the original event page: Questions & Answers Following are a couple of questions which have been asked and didn't get an answer during the event: Q: Is it possible to upload static pages via FTP? A: Yes, you can. Have a look at the right side column on the dashboard of your website. There you'll find information about the FTP and SFTP host names. You can use any FTP client, like ie. FileZilla to log in. FTP also gives you access to your log files. Q: What are the size limitations on SQL Database? A: 5 GB on the Web Edition, and 150 GB on the business edition. A maximum 150 databases (inclusing 'master') per SQL Database server. More details here: General Guidelines and Limitations (Azure SQL Database) Q: What's the maximum size of a SQL Server running in a Virtual Machine? A: The maximum Windows Azure VM has currently 8 CPU cores, 14 or 56 GB of RAM and 16x 1 TB hard drives. More details here: Virtual Machine and Cloud Service Sizes for Azure Q: How can we register for Windows Azure? A: Mauritius is currently not listed for phone verification. Please get in touch with Arnaud Meslier at Microsoft IOI & FP Q: Can I use my own domain name for Windows Azure websites? A: Yes, you can. But this might require to upscale your account to Standard. In case that I missed a question and answer, please use the comment section at the end of the article. Thanks! Final results Every participant was instructed during the hands-on-lab session on how to set up a cloud computing service in their account. Of course, I won't keep the results from you... Global Azure Lab GWAB 2014: Our cloud computing contribution to the research of diabetes And I would say Mauritius did a good job! Upcoming Events What are the upcoming events here in Mauritius? So far, we have the following ones (incomplete list as usual) in chronological order: Launch of Microsoft SQL Server 2014 (15.4.2014) Corsair Hackers Reboot (19.4.2014) WebCup (TBA ~ June 2014) Developers Conference (TBA ~ July 2014) Linuxfest 2014 (TBA ~ November 2014) Hopefully, there will be more announcements during the next couple of weeks and months. If you know about any other event, like a bootcamp, a code challenge or hackathon here in Mauritius, please drop me a note in the comment section below this article. Thanks! Networking and job/project opportunities Despite having technical presentations on Windows Azure an event like this always offers a great bunch of possibilities and opportunities to get in touch with new people in IT, have an exchange of experience with other like-minded people. As I already wrote about Communities - The importance of exchange and discussion - I had a great conversation with representatives of the University des Mascareignes which are currently embracing cloud infrastructure and cloud computing for their various campuses in the Indian Ocean. As for the MSCC it would be a great experience to stay in touch with them, and to work on upcoming, common activities. Furthermore, I had a very good conversation with Thierry and Ludovic of Microsoft IOI & FP on the necessity of user groups and IT communities here on the island. It's great to see that the MSCC is currently on a run and that local companies are sharing our thoughts on promoting IT careers and exchange of IT knowledge in such an open way. I'm also looking forward to be able to participate and to contribute on more events in the near future. My resume of the day We learned a lot today and there is always room for improvement! It was an awesome event and quite frankly it was a pleasure to spend the day with so many enthuastic IT people in the same room. It was a great experience to organise such event locally and participate on a global scale to support the GlyQ-IQ Technology in their research on diabetes. I was so pleased to see the involvement of new MSCC members in taking the opportunity to share and learn about the power of cloud computing. The Mauritius Software Craftsmanship Community is on the right way and this year's bootcamp on Windows Azure only marked the beginning of our journey. Thank you to our sponsors and my kudos to the MSPs! Update: Media coverage The event has been reported in local media, too. Following are some resources: Orange - Local - Business: Le cloud, pour des recherches approfondies sur le diabète Maurice Info.mu: Le cloud, pour des recherches approfondies sur le diabète Le Quotidien Pg 2: Global Windows Azure Bootcamp 2014 - Le cloud pour des recherches approfondies sur le diabète The Observer Pg 12: Le cloud, pour des recherches approfondies sur le diabète

  Read the article

• CodePlex Daily Summary for Tuesday, January 04, 2011

  CodePlex Daily Summary for Tuesday, January 04, 2011Popular ReleasesMini Memory Dump Diagnosis using Asp.Net: MiniDump HealthMonitor: Enable developers to generate mini memory dumps in case of unhandled exceptions or for specific exception scenarios without using any external tools , only using Asp.Net 2.0 and above. Many times in production , QA Servers the issues require post-mortem or low-level system debugging efforts. This Memory dump generator will help in those scenarios.EnhSim: EnhSim 2.2.9 BETA: 2.2.9 BETAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the Gobl...xUnit.net - Unit Testing for .NET: xUnit.net 1.7 Beta: xUnit.net release 1.7 betaBuild #1533 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision)...Json.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14977.000: Prerequisites: ============== o Visual Studio 2008 / Visual Studio 2010 o ReSharper 5.1.1753.4 o StyleCop 4.4.1.2 Preview This release adds no new features, has bug fixes around performance and unhandled errors reported on YouTrack.BloodSim: BloodSim - 1.3.1.0: - Restructured simulation log back end to something less stupid to drastically reduce simulation time and memory usage - Removed a debug log entry that was left over from testing of 1.3.0.0 - Fixed a rounding and calculation error with Haste rating - Added option for Rune of SwordshatteringDbDocument: DbDoc Initial Version: DbDoc Initial versionASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.2: Atomic CMS 2.1.2 release notes Atomic CMS installation guide Kind Of Magic MSBuild Task: Beta 4: Update to keep up with latest bug fixes. To those who don't like Magic/NoMagic attributes, you may change these names in KindOfMagic.targets file: Change this line: <MagicTask Assembly="@(IntermediateAssembly)" References="@(ReferencePath)"/> to something like this: <MagicTask Assembly="@(IntermediateAssembly)" References="@(ReferencePath)" MagicAttribute="MyMagicAttribute" NoMagicAttribute="MyNoMagicAttribute"/>N2 CMS: 2.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) All-round improvements and bugfixes File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open the proj...Wii Backup Fusion: Wii Backup Fusion 1.0: - Norwegian translation - French translation - German translation - WBFS dump for analysis - Scalable full HQ cover - Support for log file - Load game images improved - Support for image splitting - Diff for images after transfer - Support for scrubbing modes - Search functionality for log - Recurse depth for Files/Load - Show progress while downloading game cover - Supports more databases for cover download - Game cover loading routines improvedAutoLoL: AutoLoL v1.5.1: Fix: Fixed a bug where pressing Save As would not select the Mastery Directory by default Unexpected errors are now always reported to the user before closing AutoLoL down.* Extracted champion data to Data directory** Added disclaimer to notify users this application has nothing to do with Riot Games Inc. Updated Codeplex image * An error report will be shown to the user which can help the developers to find out what caused the error, this should improve support ** We are working on ...TortoiseHg: TortoiseHg 1.1.8: TortoiseHg 1.1.8 is a minor bug fix release, with minor improvementsBlogEngine.NET: BlogEngine.NET 2.0: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. To get started, be sure to check out our installatio...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!New Projects3D SharePoint Tag Cloud in Silverlight: This is a Silverlight Tag Cloud intended for use in SharePoint but can be configured for use separately as well. Based on a blog post from Peter Gerritsen (http://blog.petergerritsen.nl/2009/02/14/creating-a-3d-tagcloud-in-silverlight-part-1/).AffinityUI for Unity 3D: AffinityUI makes writing GUI code for Unity 3D easier with a component based API that allows you to write GUIs in a declarative fashion using a fluent interface, update events and powerful two-way databinding. A visual editor and scene GUI support are planned for the future.calendar synchronization: This will enable tight integration between ivvy core and infragistics scheduler. Will utilize oData and native isolated strorage instead of SQLite as planed earlier.Card Games Library: The aim of this project is to offer a framework for creating card games logics and rules. This project is not focused on particular games but offers a felxible and extensible base for creating card games, like; poker, solitaire, rummy, etcDbDocument: DbDoc tool seeks to be helper tool side by side with MS SQL server management studio tool, you can design your DB Tables in visualized way through Diagrams and then use “DbDoc” tool to generate design document in MS Word table formatDelux: Delux project for educationDnEcuDiag - A .NET Ecu Diagnostic Application: DnEcuDiag is an application framework for developing electronic control unit diagnostic functionality without the need to implement code.Dynamics CRM 4.0 Recycle Bin: This add-on for Microsoft Dynamics CRM 4.0 to enable Recycle Bin Features (Restore, Permenant Delete) for CRM users.EPPLib.it: Il sistema sincrono di registrazione e mantenimento dei nomi a dominio del Registro.it utilizza il protocollo EPP (Extensible Provisioning Protocol). EPPLib consente di interfacciare i propri progetti con il sistema sincrono del Registro.it.IoC4Fun: Very LightWeight IoC or DI Container only required Net Framework 3.5 written in C#. For Small Apps or Educational purpose. Not intrusion code added like others Containers. Just Plan Register Dependencies and Let Container resolve magically the Injection Dependencies.ISocial: WP7 Application, centralise les réseaux sociauxJohnnyIssa: begASP.NET Version 4.LiveCPE: LiveCPE is an Academic project based on C# and ASP.Net. It aims to be a social network website. MS CRM - Skype Connector: Skype Addon for Microsoft Dynamics CRM allows to dial CRM Contacts, Lead and so on via Skype. It's developed in ASP.NET and C#.Ryan's Projects: a group of random c# projectsSeleniuMspec: SeleniuMspec is a template for Selenium IDE that generates Selenium tests for Mspec (a .NET BDD framework). SharePoint FAQ Web Part: The SharePoint FAQ Web Part makes it easier for SharePoint Users to display FAQs feature on their SharePoint sites. You'll no longer have to maintain HTML and anchors in the Content Editor Web Part, as the FAQs are now automatically generated from a SharePoint list. Silverlight Planet: Projetos da comunidade Silverlight Planet www.silverlightplanet.net.brWP7 Expense Report: Expense Report for Windows Phone 7xll - the easy way to create Excel add-ins: The xll C++ library makes it easy to create xll add-ins for Excel. It also supports the big grid, wide-character strings, and thread-safe functions. ????????: ????，??，??，????，????，??????

  Read the article

• Looking into Enum Support in Entity Framework 5.0 Code First

  - by nikolaosk

  In this post I will show you with a hands-on demo the enum support that is available in Visual Studio 2012, .Net Framework 4.5 and Entity Framework 5.0. You can have a look at this post to learn about the support of multilple diagrams per model that exists in Entity Framework 5.0. We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. Before I move on to the actual demo I must say that in EF 5.0 an enumeration can have the following types. Byte Int16 Int32 Int64 Sbyte Obviously I cannot go into much detail on what EF is and what it does. I will give again a short introduction.The .Net framework provides support for Object Relational Mapping through EF. So EF is a an ORM tool and it is now the main data access technology that microsoft works on. I use it quite extensively in my projects. Through EF we have many things out of the box provided for us. We have the automatic generation of SQL code.It maps relational data to strongly types objects.All the changes made to the objects in the memory are persisted in a transactional way back to the data store. You can find in this post an example on how to use the Entity Framework to retrieve data from an SQL Server Database using the "Database/Schema First" approach. In this approach we make all the changes at the database level and then we update the model with those changes. In this post you can see an example on how to use the "Model First" approach when working with ASP.Net and the Entity Framework. This model was firstly introduced in EF version 4.0 and we could start with a blank model and then create a database from that model.When we made changes to the model , we could recreate the database from the new model. You can search in my blog, because I have posted many posts regarding ASP.Net and EF. I assume you have a working knowledge of C# and know a few things about EF. The Code First approach is the more code-centric than the other two. Basically we write POCO classes and then we persist to a database using something called DBContext. Code First relies on DbContext. We create 2,3 classes (e.g Person,Product) with properties and then these classes interact with the DbContext class. We can create a new database based upon our POCOS classes and have tables generated from those classes.We do not have an .edmx file in this approach.By using this approach we can write much easier unit tests. DbContext is a new context class and is smaller,lightweight wrapper for the main context class which is ObjectContext (Schema First and Model First). Let's begin building our sample application. 1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application. 2) Add a web form, default.aspx page to the application. 3) Now we need to make sure the Entity Framework is included in our project. Go to Solution Explorer, right-click on the project name.Then select Manage NuGet Packages...In the Manage NuGet Packages dialog, select the Online tab and choose the EntityFramework package.Finally click Install. Have a look at the picture below   4) Create a new folder. Name it CodeFirst . 5) Add a new item in your application, a class file. Name it Footballer.cs. This is going to be a simple POCO class.Place it in the CodeFirst folder. The code follows public class Footballer { public int FootballerID { get; set; } public string FirstName { get; set; } public string LastName { get; set; } public double Weight { get; set; } public double Height { get; set; } public DateTime JoinedTheClub { get; set; } public int Age { get; set; } public List<Training> Trainings { get; set; } public FootballPositions Positions { get; set; } }    Now I am going to define my enum values in the same class file, Footballer.cs    public enum FootballPositions    {        Defender,        Midfielder,        Striker    } 6) Now we need to create the Training class. Add a new class to your application and place it in the CodeFirst folder.The code for the class follows.     public class Training     {         public int TrainingID { get; set; }         public int TrainingDuration { get; set; }         public string TrainingLocation { get; set; }     }   7) Then we need to create a context class that inherits from DbContext.Add a new class to the CodeFirst folder.Name it FootballerDBContext.Now that we have the entity classes created, we must let the model know.I will have to use the DbSet<T> property.The code for this class follows       public class FootballerDBContext:DbContext     {         public DbSet<Footballer> Footballers { get; set; }         public DbSet<Training> Trainings { get; set; }     } Do not forget to add  (using System.Data.Entity;) in the beginning of the class file 8) We must take care of the connection string. It is very easy to create one in the web.config.It does not matter that we do not have a database yet.When we run the DbContext and query against it,it will use a connection string in the web.config and will create the database based on the classes. In my case the connection string inside the web.config, looks like this      <connectionStrings>    <add name="CodeFirstDBContext"  connectionString="server=.\SqlExpress;integrated security=true;"  providerName="System.Data.SqlClient"/>                       </connectionStrings>   9) Now it is time to create Linq to Entities queries to retrieve data from the database . Add a new class to your application in the CodeFirst folder.Name the file DALfootballer.cs We will create a simple public method to retrieve the footballers. The code for the class follows public class DALfootballer     {         FootballerDBContext ctx = new FootballerDBContext();         public List<Footballer> GetFootballers()         {             var query = from player in ctx.Footballers where player.FirstName=="Jamie" select player;             return query.ToList();         }     }   10) Place a GridView control on the Default.aspx page and leave the default name.Add an ObjectDataSource control on the Default.aspx page and leave the default name. Set the DatasourceID property of the GridView control to the ID of the ObjectDataSource control.(DataSourceID="ObjectDataSource1" ). Let's configure the ObjectDataSource control. Click on the smart tag item of the ObjectDataSource control and select Configure Data Source. In the Wizzard that pops up select the DALFootballer class and then in the next step choose the GetFootballers() method.Click Finish to complete the steps of the wizzard. Build your application.  11)  Let's create an Insert method in order to insert data into the tables. I will create an Insert() method and for simplicity reasons I will place it in the Default.aspx.cs file. private void Insert()        {            var footballers = new List<Footballer>            {                new Footballer {                                 FirstName = "Steven",LastName="Gerrard", Height=1.85, Weight=85,Age=32, JoinedTheClub=DateTime.Parse("12/12/1999"),Positions=FootballPositions.Midfielder,                Trainings = new List<Training>                             {                                     new Training {TrainingDuration = 3, TrainingLocation="MelWood"},                    new Training {TrainingDuration = 2, TrainingLocation="Anfield"},                    new Training {TrainingDuration = 2, TrainingLocation="MelWood"},                }                            },                            new Footballer {                                  FirstName = "Jamie",LastName="Garragher", Height=1.89, Weight=89,Age=34, JoinedTheClub=DateTime.Parse("12/02/2000"),Positions=FootballPositions.Defender,                Trainings = new List<Training>                                             {                                 new Training {TrainingDuration = 3, TrainingLocation="MelWood"},                new Training {TrainingDuration = 5, TrainingLocation="Anfield"},                new Training {TrainingDuration = 6, TrainingLocation="Anfield"},                }                           }                    };            footballers.ForEach(foot => ctx.Footballers.Add(foot));            ctx.SaveChanges();        }   12) In the Page_Load() event handling routine I called the Insert() method.        protected void Page_Load(object sender, EventArgs e)        {                   Insert();                }  13) Run your application and you will see that the following result,hopefully. You can see clearly that the data is returned along with the enum value.  14) You must have also a look at the database.Launch SSMS and see the database and its objects (data) created from EF Code First.Have a look at the picture below. Hopefully now you have seen the support that exists in EF 5.0 for enums.Hope it helps !!!

  Read the article

• Update records in OAF Page

  - by PRajkumar

  1. Create a Search Page to Create a page please go through the following link https://blogs.oracle.com/prajkumar/entry/create_oaf_search_page   2. Implement Update Action in SearchPG Right click on ResultTable in SearchPG > New > Item   Set following properties for New Item   Attribute Property ID UpdateAction Item Style image Image URI updateicon_enabled.gif Atribute Set /oracle/apps/fnd/attributesets/Buttons/Update Prompt Update Additional Text Update record Height 24 Width 24 Action Type fireAction Event update Submit True Parameters Name – PColumn1 Value -- ${oa.SearchVO1.Column1} Name – PColumn2 Value -- ${oa.SearchVO1.Column2}   3. Create a Update Page Right click on SearchDemo > New > Web Tier > OA Components > Page Name – UpdatePG Package – prajkumar.oracle.apps.fnd.searchdemo.webui   4. Select the UpdatePG and go to the strcuture pane where a default region has been created   5. Select region1 and set the following properties:   Attribute Property ID PageLayoutRN Region Style PageLayout AM Definition prajkumar.oracle.apps.fnd.searchdemo.server.SearchAM Window Title Update Page Window Title Update Page Auto Footer True   6. Create the Second Region (Main Content Region) Select PageLayoutRN right click > New > Region ID – MainRN Region Style – messageComponentLayout   7. Create first Item (Empty Field) MainRN > New > messageTextInput   Attribute Property ID Column1 Style Property messageTextInput Prompt Column1 Data Type VARCHAR2 Length 20 Maximum Length 100 View Instance SearchVO1 View Attribute Column1   8. Create second Item (Empty Field) MainRN > New > messageTextInput   Attribute Property ID Column2 Style Property messageTextInput Prompt Column2 Data Type VARCHAR2 Length 20 Maximum Length 100 View Instance SearchVO1 View Attribute Column2   9. Create a container Region for Apply and Cancel Button in UpdatePG Select MainRN of UpdatePG MainRN > messageLayout   Attribute Property Region ButtonLayout   10. Create Apply Button Select ButtonLayout > New > Item   Attribute Property ID Apply Item Style submitButton Attribute /oracle/apps/fnd/attributesets/Buttons/Apply   11. Create Cancel Button Select ButtonLayout > New > Item   Attribute Property ID Cancel Item Style submitButton Attribute /oracle/apps/fnd/attributesets/Buttons/Cancel   12. Add Page Controller for SearchPG Right Click on PageLayoutRN of SearchPG > Set New Controller Name – SearchCO Package -- prajkumar.oracle.apps.fnd.searchdemo.webui   Add Following code in Search Page controller SearchCO    import oracle.apps.fnd.framework.webui.OAPageContext; import oracle.apps.fnd.framework.webui.beans.OAWebBean; import oracle.apps.fnd.framework.webui.OAWebBeanConstants; import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean; public void processRequest(OAPageContext pageContext, OAWebBean webBean) {  super.processRequest(pageContext, webBean);  OAQueryBean queryBean = (OAQueryBean)webBean.findChildRecursive("QueryRN");  queryBean.clearSearchPersistenceCache(pageContext); }   public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) {  super.processFormRequest(pageContext, webBean);     if ("update".equals(pageContext.getParameter(EVENT_PARAM)))  {   pageContext.setForwardURL("OA.jsp?page=/prajkumar/oracle/apps/fnd/searchdemo/webui/UpdatePG",                                     null,                                     OAWebBeanConstants.KEEP_MENU_CONTEXT,                                                                 null,                                                                                        null,                                     true,                                                                 OAWebBeanConstants.ADD_BREAD_CRUMB_NO,                                     OAWebBeanConstants.IGNORE_MESSAGES);  }  } 13. Add Page Controller for UpdatePG Right Click on PageLayoutRN of UpdatePG > Set New Controller Name – UpdateCO Package -- prajkumar.oracle.apps.fnd.searchdemo.webui   Add Following code in Update Page controller UpdateCO    import oracle.apps.fnd.framework.webui.OAPageContext; import oracle.apps.fnd.framework.webui.beans.OAWebBean; import oracle.apps.fnd.framework.webui.OAWebBeanConstants; import oracle.apps.fnd.framework.OAApplicationModule; import java.io.Serializable;  public void processRequest(OAPageContext pageContext, OAWebBean webBean) {  super.processRequest(pageContext, webBean);  OAApplicationModule am = pageContext.getApplicationModule(webBean);  String Column1 = pageContext.getParameter("PColumn1");  String Column2 = pageContext.getParameter("PColumn2");  Serializable[] params = { Column1, Column2 };  am.invokeMethod("updateRow", params); } public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) {  super.processFormRequest(pageContext, webBean);  OAApplicationModule am = pageContext.getApplicationModule(webBean);         if (pageContext.getParameter("Apply") != null)  {    am.invokeMethod("apply");   pageContext.forwardImmediately("OA.jsp?page=/prajkumar/oracle/apps/fnd/searchdemo/webui/SearchPG",                                          null,                                          OAWebBeanConstants.KEEP_MENU_CONTEXT,                                          null,                                          null,                                          false, // retain AM                                          OAWebBeanConstants.ADD_BREAD_CRUMB_NO);  }  else if (pageContext.getParameter("Cancel") != null)  {    am.invokeMethod("rollback");   pageContext.forwardImmediately("OA.jsp?page=/prajkumar/oracle/apps/fnd/searchdemo/webui/SearchPG",                                          null,                                          OAWebBeanConstants.KEEP_MENU_CONTEXT,                                          null,                                          null,                                          false, // retain AM                                          OAWebBeanConstants.ADD_BREAD_CRUMB_NO);  } }   14. Add following Code in SearchAMImpl   import oracle.apps.fnd.framework.server.OAApplicationModuleImpl; import oracle.apps.fnd.framework.server.OAViewObjectImpl;     public void updateRow(String Column1, String Column2) {  SearchVOImpl vo = (SearchVOImpl)getSearchVO1();  vo.initQuery(Column1, Column2); }     public void apply() {  getTransaction().commit(); } public void rollback() {  getTransaction().rollback(); }   15. Add following Code in SearchVOImpl   import oracle.apps.fnd.framework.server.OAViewObjectImpl;     public void initQuery(String Column1, String Column2) {  if ((Column1 != null) && (!("".equals(Column1.trim()))))  {   setWhereClause("column1 = :1 AND column2 = :2");   setWhereClauseParams(null); // Always reset   setWhereClauseParam(0, Column1);   setWhereClauseParam(1, Column2);   executeQuery();  } }   16. Congratulation you have successfully finished. Run Your Search page and Test Your Work                          

  Read the article

• Oracle Solaris: Zones on Shared Storage

  - by Jeff Victor

  Oracle Solaris 11.1 has several new features. At oracle.com you can find a detailed list. One of the significant new features, and the most significant new feature releated to Oracle Solaris Zones, is casually called "Zones on Shared Storage" or simply ZOSS (rhymes with "moss"). ZOSS offers much more flexibility because you can store Solaris Zones on shared storage (surprise!) so that you can perform quick and easy migration of a zone from one system to another. This blog entry describes and demonstrates the use of ZOSS. ZOSS provides complete support for a Solaris Zone that is stored on "shared storage." In this case, "shared storage" refers to fiber channel (FC) or iSCSI devices, although there is one lone exception that I will demonstrate soon. The primary intent is to enable you to store a zone on FC or iSCSI storage so that it can be migrated from one host computer to another much more easily and safely than in the past. With this blog entry, I wanted to make it easy for you to try this yourself. I couldn't assume that you have a SAN available - which is a good thing, because neither do I! What could I use, instead? [There he goes, foreshadowing again... -Ed.] Developing this entry reinforced the lesson that the solution to every lab problem is VirtualBox. Oracle VM VirtualBox (its formal name) helps here in a couple of important ways. It offers the ability to easily install multiple copies of Solaris as guests on top of any popular system (Microsoft Windows, MacOS, Solaris, Oracle Linux (and other Linuxes) etc.). It also offers the ability to create a separate virtual disk drive (VDI) that appears as a local hard disk to a guest. This virtual disk can be moved very easily from one guest to another. In other words, you can follow the steps below on a laptop or larger x86 system. Please note that the ability to use ZOSS to store a zone on a local disk is very useful for a lab environment, but not so useful for production. I do not suggest regularly moving disk drives among computers. In the method I describe below, that virtual hard disk will contain the zone that will be migrated among the (virtual) hosts. In production, you would use FC or iSCSI LUNs instead. The zonecfg(1M) man page details the syntax for each of the three types of devices. Why Migrate? Why is the migration of virtual servers important? Some of the most common reasons are: Moving a workload to a different computer so that the original computer can be turned off for extensive maintenance. Moving a workload to a larger system because the workload has outgrown its original system. If the workload runs in an environment (such as a Solaris Zone) that is stored on shared storage, you can restore the service of the workload on an alternate computer if the original computer has failed and will not reboot. You can simplify lifecycle management of a workload by developing it on a laptop, migrating it to a test platform when it's ready, and finally moving it to a production system. Concepts For ZOSS, the important new concept is named "rootzpool". You can read about it in the zonecfg(1M) man page, but here's the short version: it's the backing store (hard disk(s), or LUN(s)) that will be used to make a ZFS zpool - the zpool that will hold the zone. This zpool: contains the zone's Solaris content, i.e. the root file system does not contain any content not related to the zone can only be mounted by one Solaris instance at a time Method Overview Here is a brief list of the steps to create a zone on shared storage and migrate it. The next section shows the commands and output. You will need a host system with an x86 CPU (hopefully at least a couple of CPU cores), at least 2GB of RAM, and at least 25GB of free disk space. (The steps below will not actually use 25GB of disk space, but I don't want to lead you down a path that ends in a big sign that says "Your HDD is full. Good luck!") Configure the zone on both systems, specifying the rootzpool that both will use. The best way is to configure it on one system and then copy the output of "zonecfg export" to the other system to be used as input to zonecfg. This method reduces the chances of pilot error. (It is not necessary to configure the zone on both systems before creating it. You can configure this zone in multiple places, whenever you want, and migrate it to one of those places at any time - as long as those systems all have access to the shared storage.) Install the zone on one system, onto shared storage. Boot the zone. Provide system configuration information to the zone. (In the Real World(tm) you will usually automate this step.) Shutdown the zone. Detach the zone from the original system. Attach the zone to its new "home" system. Boot the zone. The zone can be used normally, and even migrated back, or to a different system. Details The rest of this shows the commands and output. The two hostnames are "sysA" and "sysB". Note that each Solaris guest might use a different device name for the VDI that they share. I used the device names shown below, but you must discover the device name(s) after booting each guest. In a production environment you would also discover the device name first and then configure the zone with that name. Fortunately, you can use the command "zpool import" or "format" to discover the device on the "new" host for the zone. The first steps create the VirtualBox guests and the shared disk drive. I describe the steps here without demonstrating them. Download VirtualBox and install it using a method normal for your host OS. You can read the complete instructions. Create two VirtualBox guests, each to run Solaris 11.1. Each will use its own VDI as its root disk. Install Solaris 11.1 in each guest.Install Solaris 11.1 in each guest. To install a Solaris 11.1 guest, you can either download a pre-built VirtualBox guest, and import it, or install Solaris 11.1 from the "text install" media. If you use the latter method, after booting you will not see a windowing system. To install the GUI and other important things, login and run "pkg install solaris-desktop" and take a break while it installs those important things. Life is usually easier if you install the VirtualBox Guest Additions because then you can copy and paste between the host and guests, etc. You can find the guest additions in the folder matching the version of VirtualBox you are using. You can also read the instructions for installing the guest additions. To create the zone's shared VDI in VirtualBox, you can open the storage configuration for one of the two guests, select the SATA controller, and click on the "Add Hard Disk" icon nearby. Choose "Create New Disk" and specify an appropriate path name for the file that will contain the VDI. The shared VDI must be at least 1.5 GB. Note that the guest must be stopped to do this. Add that VDI to the other guest - using its Storage configuration - so that each can access it while running. The steps start out the same, except that you choose "Choose Existing Disk" instead of "Create New Disk." Because the disk is configured on both of them, VirtualBox prevents you from running both guests at the same time. Identify device names of that VDI, in each of the guests. Solaris chooses the name based on existing devices. The names may be the same, or may be different from each other. This step is shown below as "Step 1." Assumptions In the example shown below, I make these assumptions. The guest that will own the zone at the beginning is named sysA. The guest that will own the zone after the first migration is named sysB. On sysA, the shared disk is named /dev/dsk/c7t2d0 On sysB, the shared disk is named /dev/dsk/c7t3d0 (Finally!) The Steps Step 1) Determine the name of the disk that will move back and forth between the systems. root@sysA:~# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,2829@d/disk@0,0 1. c7t2d0 /pci@0,0/pci8086,2829@d/disk@2,0 Specify disk (enter its number): ^D Step 2) The first thing to do is partition and label the disk. The magic needed to write an EFI label is not overly complicated. root@sysA:~# format -e c7t2d0 selecting c7t2d0 [disk formatted] FORMAT MENU: ... format fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partition Type "y" to accept the default partition, otherwise type "n" to edit the partition table. n SELECT ONE OF THE FOLLOWING: ... Enter Selection: 1 ... G=EFI_SYS 0=Exit? f SELECT ONE... ... 6 format label ... Specify Label type[1]: 1 Ready to label disk, continue? y format quit root@sysA:~# ls /dev/dsk/c7t2d0 /dev/dsk/c7t2d0 Step 3) Configure zone1 on sysA. root@sysA:~# zonecfg -z zone1 Use 'create' to begin configuring a new zone. zonecfg:zone1 create create: Using system default template 'SYSdefault' zonecfg:zone1 set zonename=zone1 zonecfg:zone1 set zonepath=/zones/zone1 zonecfg:zone1 add rootzpool zonecfg:zone1:rootzpool add storage dev:dsk/c7t2d0 zonecfg:zone1:rootzpool end zonecfg:zone1 exit root@sysA:~# oot@sysA:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: ... rootzpool: storage: dev:dsk/c7t2d0 Step 4) Install the zone. This step takes the most time, but you can wander off for a snack or a few laps around the gym - or both! (Just not at the same time...) root@sysA:~# zoneadm -z zone1 install Created zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T163634Z.zone1.install Image: Preparing at /zones/zone1/root. AI Manifest: /tmp/manifest.xml.RXaycg SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: zone1 Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/support/ DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 183/183 33556/33556 222.2/222.2 2.8M/s PHASE ITEMS Installing new actions 46825/46825 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 1696.847 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T163634Z.zone1.install Step 5) Boot the Zone. root@sysA:~# zoneadm -z zone1 boot Step 6) Login to zone's console to complete the specification of system information. root@sysA:~# zlogin -C zone1 Answer the usual questions and wait for a login prompt. Then you can end the console session with the usual "~." incantation. Step 7) Shutdown the zone so it can be "moved." root@sysA:~# zoneadm -z zone1 shutdown Step 8) Detach the zone so that the original global zone can't use it. root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 installed /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 484M 1.51G 23% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool Step 9) Review the result and shutdown sysA so that sysB can use the shared disk. root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# init 0 Step 10) Now boot sysB and configure a zone with the parameters shown above in Step 1. (Again, the safest method is to use "zonecfg ... export" on sysA as described in section "Method Overview" above.) The one difference is the name of the rootzpool storage device, which was shown in the list of assumptions, and which you must determine by booting sysB and using the "format" or "zpool import" command. When that is done, you should see the output shown next. (I used the same zonename - "zone1" - in this example, but you can choose any valid zonename you want.) root@sysB:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysB:~# zonecfg -z zone1 info zonename: zone1 zonepath: /zones/zone1 brand: solaris autoboot: false bootargs: file-mac-profile: pool: limitpriv: scheduling-class: ip-type: exclusive hostid: fs-allowed: anet: linkname: net0 ... rootzpool: storage: dev:dsk/c7t3d0 Step 11) Attaching the zone automatically imports the zpool. root@sysB:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T184034Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T184034Z.zone1.attach root@sysB:~# zoneadm -z zone1 boot root@sysB:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 Step 12) Now let's migrate the zone back to sysA. Create a file in zone1 so we can verify it exists after we migrate the zone back, then begin migrating it back. root@zone1:~# ls /opt root@zone1:~# touch /opt/fileA root@zone1:~# ls -l /opt/fileA -rw-r--r-- 1 root root 0 Oct 22 14:47 /opt/fileA root@zone1:~# exit logout [Connection to zone 'zone1' pts/2 closed] root@sysB:~# zoneadm -z zone1 shutdown root@sysB:~# zoneadm -z zone1 detach Exported zone zpool: zone1_rpool root@sysB:~# init 0 Step 13) Back on sysA, check the status. Oracle Corporation SunOS 5.11 11.1 September 2012 root@sysA:~# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - zone1 configured /zones/zone1 solaris excl root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - Step 14) Re-attach the zone back to sysA. root@sysA:~# zoneadm -z zone1 attach Imported zone zpool: zone1_rpool Progress being logged to /var/log/zones/zoneadm.20121022T190441Z.zone1.attach Installing: Using existing zone boot environment Zone BE root dataset: zone1_rpool/rpool/ROOT/solaris Cache: Using /var/pkg/publisher. Updating non-global zone: Linking to image /. Processing linked: 1/1 done Updating non-global zone: Auditing packages. No updates necessary for this image. Updating non-global zone: Zone updated. Result: Attach Succeeded. Log saved in non-global zone as /zones/zone1/root/var/log/zones/zoneadm.20121022T190441Z.zone1.attach root@sysA:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 17.6G 11.2G 6.47G 63% 1.00x ONLINE - zone1_rpool 1.98G 491M 1.51G 24% 1.00x ONLINE - root@sysA:~# zoneadm -z zone1 boot root@sysA:~# zlogin zone1 [Connected to zone 'zone1' pts/2] Oracle Corporation SunOS 5.11 11.1 September 2012 root@zone1:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT rpool 1.98G 538M 1.46G 26% 1.00x ONLINE - Step 15) Check for the file created on sysB, earlier. root@zone1:~# ls -l /opt total 1 -rw-r--r-- 1 root root 0 Oct 22 14:47 fileA Next Steps Here is a brief list of some of the fun things you can try next. Add space to the zone by adding a second storage device to the rootzpool. Make sure that you add it to the configurations of both zones! Create a new zone, specifying two disks in the rootzpool when you first configure the zone. When you install that zone, or clone it from another zone, zoneadm uses those two disks to create a mirrored pool. (Three disks will result in a three-way mirror, etc.) Conclusion Hopefully you have seen the ease with which you can now move Solaris Zones from one system to another.

  Read the article

• File Watcher Task

  The task will detect changes to existing files as well as new files, both actions will cause the file to be found when available. A file is available when the task can open it exclusively. This is important for files that take a long time to be written, such as large files, or those that are just written slowly or delivered via a slow network link. It can also be set to look for existing files first (1.2.4.55). The full path of the found file is returned in up to three ways: The ExecValueVariable of the task. This can be set to any String variable. The OutputVariableName when specified. This can be set to any String variable. The FullPath variable within OnFileFoundEvent. This is a File Watcher Task specific event.   Advanced warning of a file having been detected, but not yet available is returned through the OnFileWatcherEvent. This event does not always coincide with the completion of the task, as completion and the OnFileFoundEvent is delayed until the file is ready for use. This event indicates that a file has been detected, and that file will now be monitored until it becomes available. The task will only detect and report on the first file that is created or changes, any subsequent changes will be ignored. Task properties and there usages are documented below: Property Data Type Description Filter String Default filter *.* will watch all files. Standard windows wildcards and patterns can be used to restrict the files monitored. FindExistingFiles Boolean Indicates whether the task should check for any existing files that match the path and filter criteria, before starting the file watcher. IncludeSubdirectories Boolean Indicates whether changes in subdirectories are accepted or ignored. OutputVariableName String The name of the variable into which the full file path found will be written on completion of the task. The variable specified should be of type string. Path String Path to watch for new files or changes to existing files. The path is a directory, not a full filename. For a specific file, enter the file name in the Filter property and the directory in the Path property. PathInputType FileWatcherTask.InputType Three input types are supported for the path: Connection - File connection manager, of type existing folder. Direct Input - Type the path directly into the UI or set on the property as a literal string. Variable – The name of the variable which contains the path. Timeout Integer Time in minutes to wait for a file. If no files are detected within the timeout period the task will fail. The default value of 0 means infinite, and will not expire. TimeoutAsWarning Boolean The default behaviour is to raise an error and fail the task on timeout. This property allows you to suppress the error on timeout, a warning event is raised instead, and the task succeeds. The default value is false.   Installation The task is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the task to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Control Flow Items tab, and then check the File Watcher Task in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Downloads The File Watcher Task  is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. File Watcher Task for SQL Server 2005 File Watcher Task for SQL Server 2008 File Watcher Task for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.16 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.14 - Fixed user interface bug. A migration problem caused the UI type editors to reference an old SQL 2005 assembly. (17 Nov 2008) Version 2.0.0.7 - SQL Server 2008 release. (20 Oct 2008) SQL Server 2005 Version 1.2.6.100 - Fixed UI bug with TimeoutAsWarning property not saving correctly. Improved expression support in UI. File availability detection changed to use read-only lock, allowing reduced permissions to be used. Corrected installed issue which prevented installation on 64-bit machines with SSIS runtime only components. (18 Mar 2007) Version 1.2.5.73 - Added TimeoutAsWarning property. Gives the ability to suppress the error on timeout, a warning event is raised instead, and the task succeeds. (Task Version 3) (27 Sep 2006) Version 1.2.4.61 - Fixed a bug which could cause a loop condition with an unexpected exception such as incorrect file permissions. (20 Sep 2006) Version 1.2.4.55 - Added FindExistingFiles property. When true the task will check for an existing file before the file watcher itself actually starts. (Task Version 2) (8 Sep 2006) Version 1.2.3.39 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. Property type validation improved. (12 Jun 2006) Version 1.2.1.0 - SQL Server 2005 IDW 16 Sept CTP. Futher UI enhancements, including expression indicator. Fixed bug caused by execution within loop Subsequent iterations detected the same file as the first iteration. Added IncludeSubdirectories property. Fixed bug when changes made in subdirectories, and folder change was detected, causing task failure. (Task Version 1) (6 Oct 2005) Version 1.2.0.0 - SQL Server 2005 IDW 15 June CTP. Changes made include an enhanced UI, the PathInputType property for greater flexibility with path input, the OutputVariableName property, and the new OnFileFoundEvent event. (7 Sep 2005) Version 1.1.2 - Public Release (16 Nov 2004) Screenshots   Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005 and SQL Server 2008. If you an error when you try and use the task along the lines of The task with the name "File Watcher Task" and the creation name ... is not registered for use on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This cache is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. The full error message is shown below for reference: TITLE: Microsoft Visual Studio ------------------------------ The task with the name "File Watcher Task" and the creation name "Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTask, Konesans.Dts.Tasks.FileWatcherTask, Version=1.2.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b" is not registered for use on this computer. Contact Information: File Watcher Task A similar error message can be shown when trying to edit the task if the Microsoft Exception Message Box is not installed. This useful component is installed as part of the SQL Server Management Studio tools but occasionally due to the custom options chosen during SQL Server 2005 setup it may be absent. If you get an error like Could not load file or assembly 'Microsoft.ExceptionMessageBox.. you can manually download and install the missing component. It is available as part of the Feature Pack for SQL Server 2005 release. The feature packs are occasionally updated by Microsoft so you may like to check for a more recent edition, but you can find the Microsoft Exception Message Box download links here - Feature Pack for Microsoft SQL Server 2005 - April 2006 If you encounter this problem on SQL Server 2008, please check that you have installed the SQL Server client components. The component is no longer available as a separate download for SQL Server 2008  as noted in the Microsoft documentation for Deploying an Exception Message Box Application The full error message is shown below for reference, although note that the Version will change between SQL Server 2005 and SQL Server 2008: TITLE: Microsoft Visual Studio ------------------------------ Cannot show the editor for this task. ------------------------------ ADDITIONAL INFORMATION: Could not load file or assembly 'Microsoft.ExceptionMessageBox, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Konesans.Dts.Tasks.FileWatcherTask) Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component? If you are still having issues then contact us, but please provide as much detail as possible about error, as well as which version of the the task you are using and details of the SSIS tools installed. Sample Code If you wanted to use the task programmatically then here is some sample code for creating a basic package and configuring the task. It uses a variable to supply the path to watch, and also sets a variable for the OutputVariableName. Once execution is complete it writes out the file found to the console. /// <summary> /// Create a package with an File Watcher Task /// </summary> public void FileWatcherTaskBasic() { // Create the package Package package = new Package(); package.Name = "FileWatcherTaskBasic"; // Add variable for input path, the folder to look in package.Variables.Add("InputPath", false, "User", @"C:\Temp\"); // Add variable for the file found, to be used on OutputVariableName property package.Variables.Add("FileFound", false, "User", "EMPTY"); // Add the Task package.Executables.Add("Konesans.Dts.Tasks.FileWatcherTask.FileWatcherTask, " + "Konesans.Dts.Tasks.FileWatcherTask, Version=1.2.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b"); // Get the task host wrapper TaskHost taskHost = package.Executables[0] as TaskHost; // Set basic properties taskHost.Properties["PathInputType"].SetValue(taskHost, 1); // InputType.Variable taskHost.Properties["Path"].SetValue(taskHost, "User::InputPath"); taskHost.Properties["OutputVariableName"].SetValue(taskHost, "User::FileFound"); #if DEBUG // Save package to disk, DEBUG only new Application().SaveToXml(String.Format(@"C:\Temp\{0}.dtsx", package.Name), package, null); #endif // Display variable value before execution to check EMPTY Console.WriteLine("Result Variable: {0}", package.Variables["User::FileFound"].Value); // Execute package package.Execute(); // Display variable value after execution, e.g. C:\Temp\File.txt Console.WriteLine("Result Variable: {0}", package.Variables["User::FileFound"].Value); // Perform simple check for execution errors if (package.Errors.Count > 0) foreach (DtsError error in package.Errors) { Console.WriteLine("ErrorCode : {0}", error.ErrorCode); Console.WriteLine(" SubComponent : {0}", error.SubComponent); Console.WriteLine(" Description : {0}", error.Description); } else Console.WriteLine("Success - {0}", package.Name); // Clean-up package.Dispose(); } (Updated installation and troubleshooting sections, and added sample code July 2009)

  Read the article

• Error Installing MS office in ubuntu 13.04

  - by Birendra

  While I am installing ms office 10 or 13 using wine it says the following: Unhandled exception: 0xc06d007e in 32-bit code (0x7b83ae0b). Register dump: CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b EIP:7b83ae0b ESP:0a6cd3f8 EBP:0a6cd45c EFLAGS:00000287( - -- I S - -P-C) EAX:7b826449 EBX:7b8b0000 ECX:0a6cd480 EDX:0a6cd41c ESI:00dd2428 EDI:00000000 Stack dump: 0x0a6cd3f8: 0a6cd4d0 00000004 000a0009 c06d007e 0x0a6cd408: 00000000 00000000 7b83ae0b 00000001 0x0a6cd418: 0a6cd480 7b8589db 7ffd0c00 00000000 0x0a6cd428: 00000000 00000000 00000000 00000000 0x0a6cd438: 00000000 7ffd0c00 00000000 7b8b0000 0x0a6cd448: 0a6cd468 7b858b2e 00dd24c0 00000000 Backtrace: =>0 0x7b83ae0b in kernel32 (+0x2ae0b) (0x0a6cd45c) 1 0x00dc93bb in msi7bec.tmp (+0x493ba) (0x0a6cd4c4) 2 0x00dc78d8 in msi7bec.tmp (+0x478d7) (0x0a6cd704) 3 0x00dc28cd in msi7bec.tmp (+0x428cc) (0x0a6cd940) 4 0x00d9caf8 in msi7bec.tmp (+0x1caf7) (0x0a6ce83c) 5 0x7def9393 CUSTOMPROC_wrapper+0xa() in msi (0x0a6ce848) 6 0x7def9671 CUSTOMPROC_wrapper+0x2e8() in msi (0x0a6ce9a8) 7 0x7def994f CUSTOMPROC_wrapper+0x5c6() in msi (0x0a6ce9f8) 8 0x7bc7f84c call_thread_func_wrapper+0xb() in ntdll (0x0a6cea08) 9 0x7bc7f89b call_thread_func+0x44() in ntdll (0x0a6ceae8) 10 0x7bc7f82a in ntdll (+0x6f829) (0x0a6ceb08) 11 0x7bc871f3 in ntdll (+0x771f2) (0x0a6cf368) 12 0xf75c5d78 start_thread+0xd7() in libpthread.so.0 (0x0a6cf468) 13 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 14 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 15 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 16 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 17 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 18 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 19 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 20 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 21 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 22 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 23 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 24 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 25 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 26 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 27 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 28 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 29 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 30 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 31 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 32 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 33 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 34 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 35 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 36 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 37 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 38 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 39 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 40 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 41 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 42 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 43 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 44 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 45 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 46 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 47 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 48 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 49 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 50 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 51 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 52 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 53 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 54 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 55 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 56 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 57 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 58 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 59 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 60 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 61 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 62 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 63 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 64 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 65 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 66 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 67 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 68 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 69 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 70 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 71 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 72 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 73 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 74 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 75 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 76 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 77 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 78 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 79 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 80 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 81 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 82 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 83 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 84 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 85 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 86 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 87 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 88 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 89 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 90 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 91 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 92 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 93 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 94 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 95 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 96 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 97 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 98 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 99 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 100 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 101 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 102 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 103 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 104 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 105 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 106 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 107 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 108 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 109 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 110 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 111 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 112 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 113 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 114 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 115 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 116 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 117 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 118 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 119 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 120 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 121 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 122 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 123 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 124 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 125 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 126 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 127 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 128 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 129 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 130 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 131 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 132 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 133 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 134 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 135 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 136 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 137 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 138 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 139 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 140 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 141 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 142 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 143 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 144 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 145 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 146 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 147 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 148 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 149 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 150 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 151 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 152 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 153 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 154 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 155 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 156 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 157 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 158 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 159 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 160 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 161 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 162 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 163 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 164 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 165 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 166 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 167 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 168 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 169 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 170 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 171 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 172 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 173 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 174 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 175 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 176 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 177 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 178 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 179 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 180 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 181 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 182 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 183 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 184 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 185 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 186 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 187 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 188 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 189 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 190 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 191 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 192 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 193 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 194 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 195 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 196 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 197 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 198 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 199 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 200 0xf74fc3de __clone+0x5d() in libc.so.6 (0x00000000) 0x7b83ae0b: subl $4,%esp Modules: Module Address Debug info Name (149 modules) PE 840000- 86f000 Deferred osetupui PE ba0000- ba7000 Deferred msi7c0d.tmp PE d40000- d51000 Deferred msi7bb6.tmp PE d80000- ddd000 Export msi7bec.tmp PE de0000- df8000 Deferred msi83ed.tmp PE e00000- e0a000 Deferred msi83f8.tmp PE f40000- 1072000 Deferred pidgenx PE 1440000- 145a000 Deferred msi958a.tmp PE 9e80000- 9edb000 Deferred msi889c.tmp PE 9ee0000- 9f0a000 Deferred msi9130.tmp PE 10000000-10593000 Deferred osetup PE 2e000000-2e119000 Deferred setup PE 41110000-41155000 Deferred msi7bd6.tmp PE 504a0000-504c7000 Deferred msi9112.tmp PE 504d0000-504f0000 Deferred msi8b04.tmp ELF 7b800000-7ba44000 Dwarf kernel32<elf> \-PE 7b810000-7ba44000 \ kernel32 ELF 7bab6000-7bb00000 Deferred libdbus-1.so.3 ELF 7bc00000-7bce4000 Dwarf ntdll<elf> \-PE 7bc10000-7bce4000 \ ntdll ELF 7be0f000-7be32000 Deferred localspl<elf> \-PE 7be10000-7be32000 \ localspl ELF 7be32000-7bf00000 Deferred libkrb5.so.3 ELF 7bf00000-7bf04000 Deferred <wine-loader> ELF 7bf09000-7bf25000 Deferred spoolss<elf> \-PE 7bf10000-7bf25000 \ spoolss ELF 7bf25000-7bf3c000 Deferred libresolv.so.2 ELF 7bf3c000-7bf64000 Deferred libk5crypto.so.3 ELF 7bf64000-7bfa1000 Deferred libgssapi_krb5.so.2 ELF 7bfa1000-7c000000 Deferred libcups.so.2 ELF 7c208000-7c2aa000 Deferred msvcrt<elf> \-PE 7c220000-7c2aa000 \ msvcrt ELF 7c2aa000-7c400000 Deferred libxml2.so.2 ELF 7c40c000-7c415000 Deferred librt.so.1 ELF 7c415000-7c427000 Deferred libavahi-client.so.3 ELF 7c427000-7c468000 Deferred winspool<elf> \-PE 7c430000-7c468000 \ winspool ELF 7c468000-7c485000 Deferred libgcc_s.so.1 ELF 7c485000-7c4c2000 Deferred libxslt.so.1 ELF 7c4c2000-7c4e9000 Deferred liblzma.so.5 ELF 7c4e9000-7c59e000 Deferred msxml3<elf> \-PE 7c4f0000-7c59e000 \ msxml3 ELF 7c59e000-7c5cd000 Deferred msxml6<elf> \-PE 7c5a0000-7c5cd000 \ msxml6 ELF 7d0e1000-7d0ea000 Deferred libkrb5support.so.0 ELF 7d0ea000-7d0f8000 Deferred libavahi-common.so.3 ELF 7d5b5000-7d5b9000 Deferred libkeyutils.so.1 ELF 7d5b9000-7d5be000 Deferred libcom_err.so.2 ELF 7d5d6000-7d63e000 Deferred riched20<elf> \-PE 7d5e0000-7d63e000 \ riched20 ELF 7d63e000-7d672000 Deferred hhctrl<elf> \-PE 7d640000-7d672000 \ hhctrl ELF 7d672000-7d696000 Deferred hlink<elf> \-PE 7d680000-7d696000 \ hlink ELF 7d696000-7d6b6000 Deferred oleacc<elf> \-PE 7d6a0000-7d6b6000 \ oleacc ELF 7d6b6000-7d6fa000 Deferred rsaenh<elf> \-PE 7d6c0000-7d6fa000 \ rsaenh ELF 7d6fa000-7d715000 Deferred imagehlp<elf> \-PE 7d700000-7d715000 \ imagehlp ELF 7d72d000-7d764000 Deferred uxtheme<elf> \-PE 7d730000-7d764000 \ uxtheme ELF 7d764000-7d76b000 Deferred libxfixes.so.3 ELF 7d76b000-7d776000 Deferred libxcursor.so.1 ELF 7d7f6000-7d81e000 Deferred libexpat.so.1 ELF 7d81e000-7d857000 Deferred libfontconfig.so.1 ELF 7d857000-7d867000 Deferred libxi.so.6 ELF 7d867000-7d872000 Deferred libxrandr.so.2 ELF 7d872000-7d87c000 Deferred libxrender.so.1 ELF 7d87c000-7d882000 Deferred libxxf86vm.so.1 ELF 7d882000-7d8a6000 Deferred imm32<elf> \-PE 7d890000-7d8a6000 \ imm32 ELF 7d8a6000-7d8ad000 Deferred libxdmcp.so.6 ELF 7d8ad000-7d8cf000 Deferred libxcb.so.1 ELF 7d8cf000-7d8d5000 Deferred libuuid.so.1 ELF 7d8d5000-7d8ef000 Deferred libice.so.6 ELF 7d8ef000-7da26000 Deferred libx11.so.6 ELF 7da26000-7da38000 Deferred libxext.so.6 ELF 7da38000-7da41000 Deferred libsm.so.6 ELF 7da41000-7daf2000 Deferred winex11<elf> \-PE 7da50000-7daf2000 \ winex11 ELF 7daf2000-7db8d000 Deferred libfreetype.so.6 ELF 7dba5000-7dbb9000 Deferred libp11-kit.so.0 ELF 7dbb9000-7dbcb000 Deferred libtasn1.so.3 ELF 7dbcb000-7dc4f000 Deferred libgcrypt.so.11 ELF 7dc4f000-7dd14000 Deferred libgnutls.so.26 ELF 7dd14000-7dd38000 Deferred cabinet<elf> \-PE 7dd20000-7dd38000 \ cabinet ELF 7dd38000-7dd61000 Deferred mpr<elf> \-PE 7dd40000-7dd61000 \ mpr ELF 7dd61000-7dd7a000 Deferred libz.so.1 ELF 7dd7b000-7dd7f000 Deferred libxcomposite.so.1 ELF 7dd7f000-7dd92000 Deferred gnome-keyring-pkcs11.so ELF 7dd92000-7de0c000 Deferred wininet<elf> \-PE 7dda0000-7de0c000 \ wininet ELF 7de0c000-7deb9000 Deferred urlmon<elf> \-PE 7de20000-7deb9000 \ urlmon ELF 7deb9000-7dfdb000 Dwarf msi<elf> \-PE 7dec0000-7dfdb000 \ msi ELF 7dfdb000-7e04b000 Deferred dbghelp<elf> \-PE 7dfe0000-7e04b000 \ dbghelp ELF 7e04b000-7e121000 Deferred crypt32<elf> \-PE 7e050000-7e121000 \ crypt32 ELF 7e121000-7e15b000 Deferred wintrust<elf> \-PE 7e130000-7e15b000 \ wintrust ELF 7e15b000-7e27a000 Deferred comctl32<elf> \-PE 7e160000-7e27a000 \ comctl32 ELF 7e27a000-7e2f0000 Deferred shlwapi<elf> \-PE 7e290000-7e2f0000 \ shlwapi ELF 7e2f0000-7e52e000 Deferred shell32<elf> \-PE 7e300000-7e52e000 \ shell32 ELF 7e52e000-7e673000 Deferred oleaut32<elf> \-PE 7e540000-7e673000 \ oleaut32 ELF 7e673000-7e754000 Deferred gdi32<elf> \-PE 7e680000-7e754000 \ gdi32 ELF 7e754000-7e8c4000 Deferred user32<elf> \-PE 7e770000-7e8c4000 \ user32 ELF 7e8c4000-7ea26000 Deferred ole32<elf> \-PE 7e8e0000-7ea26000 \ ole32 ELF 7ea26000-7eab0000 Deferred rpcrt4<elf> \-PE 7ea30000-7eab0000 \ rpcrt4 ELF 7eab0000-7eae4000 Deferred ws2_32<elf> \-PE 7eac0000-7eae4000 \ ws2_32 ELF 7eae4000-7eb56000 Deferred advapi32<elf> \-PE 7eaf0000-7eb56000 \ advapi32 ELF 7eb56000-7eb7b000 Deferred iphlpapi<elf> \-PE 7eb60000-7eb7b000 \ iphlpapi ELF 7eb7b000-7ebaa000 Deferred netapi32<elf> \-PE 7eb80000-7ebaa000 \ netapi32 ELF 7ebaa000-7ebdf000 Deferred secur32<elf> \-PE 7ebb0000-7ebdf000 \ secur32 ELF 7ebdf000-7ebfa000 Deferred version<elf> \-PE 7ebe0000-7ebfa000 \ version ELF 7ebfa000-7ec07000 Deferred libnss_files.so.2 ELF 7ec07000-7ec13000 Deferred libnss_nis.so.2 ELF 7ec13000-7ec2c000 Deferred libnsl.so.1 ELF 7ec2c000-7ec35000 Deferred libnss_compat.so.2 ELF 7efa5000-7efe8000 Deferred libm.so.6 ELF 7efe8000-7efec000 Deferred libxinerama.so.1 ELF 7efec000-7f000000 Deferred psapi<elf> \-PE 7eff0000-7f000000 \ psapi ELF f7401000-f7405000 Deferred libxau.so.6 ELF f7406000-f740b000 Deferred libdl.so.2 ELF f740b000-f75be000 Dwarf libc.so.6 ELF f75bf000-f75da000 Dwarf libpthread.so.0 ELF f75da000-f75df000 Deferred libgpg-error.so.0 ELF f75f2000-f7736000 Dwarf libwine.so.1 ELF f7738000-f775a000 Deferred ld-linux.so.2 ELF f775a000-f775b000 Deferred [vdso].so Threads: process tid prio (all id:s are in hex) 0000000e services.exe 0000005b 0 0000005c 0 00000059 0 0000002e 0 0000001f 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001d 0 0000001a 0 00000014 0 00000013 0 0000001b plugplay.exe 00000021 0 0000001e 0 0000001c 0 00000022 explorer.exe 00000023 0 0000002a (D) C:\users\birendra\Desktop\OFFICE 2010\setup.exe 0000005d 0 <== 0000002f 0 0000002b 0 00000042 OSE.EXE 00000045 0 00000047 0 0000002d 0 00000036 0 00000040 0 00000017 0 00000018 0 00000034 0 System information: Wine build: wine-1.4.1 Platform: i386 (WOW64) Host system: Linux Host version: 3.8.0-19-generic Anybody give me suggestion how to fix the problem to install it.

  Read the article

• MERGE Bug with Filtered Indexes

  - by Paul White

  A MERGE statement can fail, and incorrectly report a unique key violation when: The target table uses a unique filtered index; and No key column of the filtered index is updated; and A column from the filtering condition is updated; and Transient key violations are possible Example Tables Say we have two tables, one that is the target of a MERGE statement, and another that contains updates to be applied to the target.  The target table contains three columns, an integer primary key, a single character alternate key, and a status code column.  A filtered unique index exists on the alternate key, but is only enforced where the status code is ‘a’: CREATE TABLE #Target ( pk integer NOT NULL, ak character(1) NOT NULL, status_code character(1) NOT NULL,   PRIMARY KEY (pk) );   CREATE UNIQUE INDEX uq1 ON #Target (ak) INCLUDE (status_code) WHERE status_code = 'a'; The changes table contains just an integer primary key (to identify the target row to change) and the new status code: CREATE TABLE #Changes ( pk integer NOT NULL, status_code character(1) NOT NULL,   PRIMARY KEY (pk) ); Sample Data The sample data for the example is: INSERT #Target (pk, ak, status_code) VALUES (1, 'A', 'a'), (2, 'B', 'a'), (3, 'C', 'a'), (4, 'A', 'd');   INSERT #Changes (pk, status_code) VALUES (1, 'd'), (4, 'a');          Target                     Changes +-----------------------+    +------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦ ¦  1 ¦ A  ¦ a           ¦    ¦  1 ¦ d           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+ ¦  4 ¦ A  ¦ d           ¦ +-----------------------+ The target table’s alternate key (ak) column is unique, for rows where status_code = ‘a’.  Applying the changes to the target will change row 1 from status ‘a’ to status ‘d’, and row 4 from status ‘d’ to status ‘a’.  The result of applying all the changes will still satisfy the filtered unique index, because the ‘A’ in row 1 will be deleted from the index and the ‘A’ in row 4 will be added. Merge Test One Let’s now execute a MERGE statement to apply the changes: MERGE #Target AS t USING #Changes AS c ON c.pk = t.pk WHEN MATCHED AND c.status_code <> t.status_code THEN UPDATE SET status_code = c.status_code; The MERGE changes the two target rows as expected.  The updated target table now contains: +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦ ¦  1 ¦ A  ¦ d           ¦ <—changed from ‘a’ ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ a           ¦ <—changed from ‘d’ +-----------------------+ Merge Test Two Now let’s repopulate the changes table to reverse the updates we just performed: TRUNCATE TABLE #Changes;   INSERT #Changes (pk, status_code) VALUES (1, 'a'), (4, 'd'); This will change row 1 back to status ‘a’ and row 4 back to status ‘d’.  As a reminder, the current state of the tables is:          Target                        Changes +-----------------------+    +------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦ ¦  1 ¦ A  ¦ d           ¦    ¦  1 ¦ a           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ d           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+ ¦  4 ¦ A  ¦ a           ¦ +-----------------------+ We execute the same MERGE statement: MERGE #Target AS t USING #Changes AS c ON c.pk = t.pk WHEN MATCHED AND c.status_code <> t.status_code THEN UPDATE SET status_code = c.status_code; However this time we receive the following message: Msg 2601, Level 14, State 1, Line 1 Cannot insert duplicate key row in object 'dbo.#Target' with unique index 'uq1'. The duplicate key value is (A). The statement has been terminated. Applying the changes using UPDATE Let’s now rewrite the MERGE to use UPDATE instead: UPDATE t SET status_code = c.status_code FROM #Target AS t JOIN #Changes AS c ON t.pk = c.pk WHERE c.status_code <> t.status_code; This query succeeds where the MERGE failed.  The two rows are updated as expected: +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦ ¦  1 ¦ A  ¦ a           ¦ <—changed back to ‘a’ ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ d           ¦ <—changed back to ‘d’ +-----------------------+ What went wrong with the MERGE? In this test, the MERGE query execution happens to apply the changes in the order of the ‘pk’ column. In test one, this was not a problem: row 1 is removed from the unique filtered index by changing status_code from ‘a’ to ‘d’ before row 4 is added.  At no point does the table contain two rows where ak = ‘A’ and status_code = ‘a’. In test two, however, the first change was to change row 1 from status ‘d’ to status ‘a’.  This change means there would be two rows in the filtered unique index where ak = ‘A’ (both row 1 and row 4 meet the index filtering criteria ‘status_code = a’). The storage engine does not allow the query processor to violate a unique key (unless IGNORE_DUP_KEY is ON, but that is a different story, and doesn’t apply to MERGE in any case).  This strict rule applies regardless of the fact that if all changes were applied, there would be no unique key violation (row 4 would eventually be changed from ‘a’ to ‘d’, removing it from the filtered unique index, and resolving the key violation). Why it went wrong The query optimizer usually detects when this sort of temporary uniqueness violation could occur, and builds a plan that avoids the issue.  I wrote about this a couple of years ago in my post Beware Sneaky Reads with Unique Indexes (you can read more about the details on pages 495-497 of Microsoft SQL Server 2008 Internals or in Craig Freedman’s blog post on maintaining unique indexes).  To summarize though, the optimizer introduces Split, Filter, Sort, and Collapse operators into the query plan to: Split each row update into delete followed by an inserts Filter out rows that would not change the index (due to the filter on the index, or a non-updating update) Sort the resulting stream by index key, with deletes before inserts Collapse delete/insert pairs on the same index key back into an update The effect of all this is that only net changes are applied to an index (as one or more insert, update, and/or delete operations).  In this case, the net effect is a single update of the filtered unique index: changing the row for ak = ‘A’ from pk = 4 to pk = 1.  In case that is less than 100% clear, let’s look at the operation in test two again:          Target                     Changes                   Result +-----------------------+    +------------------+    +-----------------------+ ¦ pk ¦ ak ¦ status_code ¦    ¦ pk ¦ status_code ¦    ¦ pk ¦ ak ¦ status_code ¦ ¦----+----+-------------¦    ¦----+-------------¦    ¦----+----+-------------¦ ¦  1 ¦ A  ¦ d           ¦    ¦  1 ¦ d           ¦    ¦  1 ¦ A  ¦ a           ¦ ¦  2 ¦ B  ¦ a           ¦    ¦  4 ¦ a           ¦    ¦  2 ¦ B  ¦ a           ¦ ¦  3 ¦ C  ¦ a           ¦    +------------------+    ¦  3 ¦ C  ¦ a           ¦ ¦  4 ¦ A  ¦ a           ¦                            ¦  4 ¦ A  ¦ d           ¦ +-----------------------+                            +-----------------------+ From the filtered index’s point of view (filtered for status_code = ‘a’ and shown in nonclustered index key order) the overall effect of the query is:   Before           After +---------+    +---------+ ¦ pk ¦ ak ¦    ¦ pk ¦ ak ¦ ¦----+----¦    ¦----+----¦ ¦  4 ¦ A  ¦    ¦  1 ¦ A  ¦ ¦  2 ¦ B  ¦    ¦  2 ¦ B  ¦ ¦  3 ¦ C  ¦    ¦  3 ¦ C  ¦ +---------+    +---------+ The single net change there is a change of pk from 4 to 1 for the nonclustered index entry ak = ‘A’.  This is the magic performed by the split, sort, and collapse.  Notice in particular how the original changes to the index key (on the ‘ak’ column) have been transformed into an update of a non-key column (pk is included in the nonclustered index).  By not updating any nonclustered index keys, we are guaranteed to avoid transient key violations. The Execution Plans The estimated MERGE execution plan that produces the incorrect key-violation error looks like this (click to enlarge in a new window): The successful UPDATE execution plan is (click to enlarge in a new window): The MERGE execution plan is a narrow (per-row) update.  The single Clustered Index Merge operator maintains both the clustered index and the filtered nonclustered index.  The UPDATE plan is a wide (per-index) update.  The clustered index is maintained first, then the Split, Filter, Sort, Collapse sequence is applied before the nonclustered index is separately maintained. There is always a wide update plan for any query that modifies the database. The narrow form is a performance optimization where the number of rows is expected to be relatively small, and is not available for all operations.  One of the operations that should disallow a narrow plan is maintaining a unique index where intermediate key violations could occur. Workarounds The MERGE can be made to work (producing a wide update plan with split, sort, and collapse) by: Adding all columns referenced in the filtered index’s WHERE clause to the index key (INCLUDE is not sufficient); or Executing the query with trace flag 8790 set e.g. OPTION (QUERYTRACEON 8790). Undocumented trace flag 8790 forces a wide update plan for any data-changing query (remember that a wide update plan is always possible).  Either change will produce a successfully-executing wide update plan for the MERGE that failed previously. Conclusion The optimizer fails to spot the possibility of transient unique key violations with MERGE under the conditions listed at the start of this post.  It incorrectly chooses a narrow plan for the MERGE, which cannot provide the protection of a split/sort/collapse sequence for the nonclustered index maintenance. The MERGE plan may fail at execution time depending on the order in which rows are processed, and the distribution of data in the database.  Worse, a previously solid MERGE query may suddenly start to fail unpredictably if a filtered unique index is added to the merge target table at any point. Connect bug filed here Tests performed on SQL Server 2012 SP1 CUI (build 11.0.3321) x64 Developer Edition © 2012 Paul White – All Rights Reserved Twitter: @SQL_Kiwi Email: [email protected]

  Read the article

• CodePlex Daily Summary for Monday, November 28, 2011

  CodePlex Daily Summary for Monday, November 28, 2011Popular ReleasesCommonLibrary.NET: CommonLibrary.NET 0.9.8 - Alpha: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.8 AlphaNew Dynamic Scripting Language : workitem : 7493 Fixes 1622 6803Widget Suite for DotNetNuke: 01.04.00: The following features/enhancements are associated with this release: Bug: Removed the empty box/white space created by some widgets New Widget: FlexSlider New Widget: Google+ Button New Widget: Klout Badge Sample Widget Script FileTools for SharePoint: Reset SharePoint Configuration Cache: This tool is used to detect the existing location of the SharePoint configuration cache files then remove them to trigger the timer service to rebuild a fresh new cache. This tool runs on any SharePoint box version 2003 and above supporting x64 bit & x32 bit OS assuming .NET framework 3.5 is installed. You must run the tool with elevated privileges if running on Win 2008 server to ensure that the tool has enough rights to restart the timer service. The tool auto-detects whether its running i...WinRT File Based Database: 0.9.1.5: Implement IsBusy property to support Save button state. See Quick Start project that is distributed as part of the download for details on how to implement Save button, use IsBusy property and how to implement SimpleCommand to use behind the Save button.Multiwfn: Multiwfn2.2_source: Multiwfn2.2_sourceBatchus-GUI: Batchus-GUI-vb 0.1.3.3: Here is v0.1.3.3. It is relatively stable. Just need some more designer layout, and tutorials, and templates.Groovy IM: Groovy IM Version 0.3: Groovy IM Version 0.3 for Windows Phone 7Internet Cache Examiner: Internet Cache Examiner 0.9.2: This is the release binary for the 0.9.2 version of Internet Cache Examiner.Composite Data Service Framework: Composite Data Service Framework 1.0: This solution contains the Composite Data Service framework solution along with a Sample Project.FxCop Integrator for Visual Studio 2010: FxCop Integrator 2.0.0 RC: Replaced the MSBuild Tasks installer to fix the bug of the targets file. FxCop Integrator is not affected by this bug. (Nov 28 2011) New FeatureSupported calculating code metrics with Code Metrics PowerTool. (Work Item #6568: 6568). Provided MSBuild tasks. #7454: 7454 Supported to filter out auto-generated code from code analysis result. #7485: 7485 Supported exporting report of code analysis result. Supported multi-project analysis. Supported file level analysis. Added the featu...Terminals: Version 2 - Beta 4 Release: Beta 4 Refresh Build Dont forget to backup your config files BEFORE upgrading! As usual, please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Updated the About form to include the date and time of the build. Useful for CI builds to ensure we have the correct version "Favourites" and "History" save their expanded states after app restarts Code cleanup, secu...MiniTwitter: 1.76: MiniTwitter 1.76 ???? ?? ?????????? User Streams ???????????? User Streams ???????????、??????????????? REST ?????????? ?????????????????????????????? ??????????????????????????????Media Companion: MC 3.424b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movie Show Resolutions... Resolved issue when reverting multiselection of movies to "-none-" Added movie rename support for subtitle files '.srt' & '.sub' Finalised code for '-1' fix - radiobutton to choose either filename or title Fixed issue with Movie Batch Wizard Fanart - ...Advanced Windows Phone Enginering Tool: WPE Downloads: This version of WPE gives you basic updating, restoring, and, erasing for your Windows Phone device.Anno 2070 Assistant: Beta v1.0 (STABLE): Anno 2070 Assistant Beta v1.0 Released! Features Included: Complete Building Layouts for Ecos, Tycoons & Techs Complete Production Chains for Ecos, Tycoons & Techs Completed Credits Screen Known Issues: Not all production chains and building layouts may be on the lists because they have not yet been discovered. However, data is still 99.9% complete. Currently the Supply & Demand, including Calculator screen are disabled until version 1.1.Minemapper: Minemapper v0.1.7: Including updated Minecraft Biome Extractor and mcmap to support the new Minecraft 1.0.0 release (new block types, etc).Visual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.10: 3.6.0.10 22-Nov-2011 Update: Removed PreEmptive Platform integration (PreEmptive analytics) Removed all PreEmptive attributes Removed PreEmptive.dll assembly references from all projects Added first support to ADAM/AD LDS Thanks to PatBea. Work Item 9775: http://netsqlazman.codeplex.com/workitem/9775VideoLan DotNet for WinForm, WPF & Silverlight 5: VideoLan DotNet for WinForm, WPF, SL5 - 2011.11.22: The new version contains Silverlight 5 library: Vlc.DotNet.Silverlight. A sample could be tested here The new version add and correct many features : Correction : Reinitialize some variables Deprecate : Logging API, since VLC 1.2 (08/20/2011) Add subitem in LocationMedia (for Youtube videos, ...) Update Wpf sample to use Youtube videos Many others correctionsSharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...New ProjectsA lightweight database access component: DataAccessor?????????????，??DataAccessor????????????： 1.??????????SQL??，?????SQL???????????； 2.?????????； 3.????????????，??MSAccess??????????????????????????????????????，?????????； 4.?????????????DBMS，??：SqlServer、Oracle??MSAccess，??????DBMS???，??????N?????????； 5.????，?????????DataAccess??????DBMS； 6.???Sql????xml??????????????dbms?SQL?????，??sql??????????????； 7.???，???DLL??????????……AdHoc.Wavesque: Wavesque provides a simple infrastructure to generate waveforms.AIRO - Interoperable Experiment Automation Package: The main goal of this project is to provide engineers and scientists flexible and extendable framework for building test, measurement and control applications. This framework is compatible with IVI-COM drivers and extends IVI Instrument Classes with custom .NET (and COM) interfaces for such devices as: step motors, different positioning devices, magnet power supplies, lock-in amplifiers etc. We maintain IVI Foundation's aim: "simplify upgrading or replacing components in complex test systems...AKBK-Schulprojekt - USB-Guard: Das Projekt USB-Überwachung wird im Rahmen des Anwendungsentwicklungs-Unterrichts des Adolf-Kolping-Berufskollegs geplant und durchgeführt. Die Software wird zur Prävention von Manipulationsversuchen während einer Informatikklausur entwickelt. Sie erkennt manipulierte und nicht erlaubte USB-Datenträger, protokolliert deren Inhalt und gibt ggf. eine Warnung aus. Sie hilft dem Lehrer dabei, Manipulationsversuche schneller und effizienter zu erkennen.Android Vision: Project to learn all things Android and some image processingAuto Fill Title of Document in Document Library in SharePoint 2010: Automatically fill title of any document in any document library in SharePoint 2010.Batchus-GUI: A graphical user interface, used to create batch files.Bazeli: Windows Phone 7 application that supports tracking of expenses.Clannad: This is a family of many things.Csv2Entity: CSV 2 Entity is a serials of tools that deal with CSV files as well as Excel files and Access files. This framework include: A VSIX file which contains VB and CS source code generate wizard for CSV Objects. Read/Write CSV files facilities. Documentation Help facilities.Cypher Bot: Encrypt secrets, messages, documents, files and more. Then decrypt them. Then repeat with the US government's encryption standard: AES 256-bit (Accepted by NIST and NSA).Cypher Bot makes it fun and easy for anyone to secure files. This is the best security solution available on the web. You are now able to encrypt/decrypt files (avi, mov, mpeg, mp3, wav, png, jpg, txt, html, vb, js) and text ALL IN ONE beautiful slick interface. Cypher Bot is developed in visual basic.EmailWebLinker: A very simple text to html converter designed to deal with those email messages that contain a list of links to images. Any http links it finds to pictures are converted inline. eps files are downloaded and rendered. Can be easily extended.FileHasher: This project provides a simple tool for generating and verifying file hashes. I created this to help the QA team I work with. The project is all C# using .NET 3.5 SP1.Financial Controls: WPF/Silverlight Controls for Financial ApplicationsGroovy IM: Groovy IM makes it easy for Windows Phone 7 consumers to chat while on there Windows Phone 7 device(s). Groovy IM is developed in C# under the GPL V2 license.IBlog: Project created to learn things ASP.NETInjectivity (Dependency Injection): Injectivity is a dependency injection framework (written in C#) with a strong focus on the ease of configuration and performance. Having been written over 5 years and at version 2.8 with unit tests & intellisense comments it is a mature framework.Lizard Chess: Chess openings preparation tool using F#. WinForms C# used for UI.MCPD: I am doing a self study course for MCPD in .NET 4 (web track), so I am committing any custom source code as a result of my study in this open source location which I can later show the work for. * MCTS Exam 70-515 Web Applications Development with Microsoft .NET Framework 4MVC TreeView Helper: This fluent MVC TreeView helper makes it easy to build and customize an HTML unordered-list tree from a recursive model.Onion Architecture with ASP.NET MVC: Onion Architecture with ASP.NET MVCOpenBank: OpenBank est une application client/serveur destinée à la gestion de compte banquaire.Philosophy Widget: This Widget for the Mac OS X Dashboard aids in memorizing the association between known works of philosophy and their authors.Physic Engine: Physic EnginePUL Programming Utility Language: PUL is a programming utility language that allows people to do tasks automatically without having to manually do them, which that process would take longer. Using PUL, you can make programs that automatically do the work for you.QuakeMeApp: QuakeMeApp is a Windows Phone 7 Earthquake Alert AppSense/Net SourceCode Field Control: This is a Field Control for Sense/Net ECMS, it provides syntax highlighting.Silverlight Video CoverFlow: This a Silverlight Sample Application including a Coverflow of Video (streaming)SpaceConquest: Incorporated standard design patterns to build a peer to peer game in Java. The game rules were similar in complexity to games like Civilization and StarcraftSPGE - An XNA 2D graphics engine for Windows and Windows Phone 7.: SPGE is an open-source graphics engine build over XNA that allows the creation of simple 2D games that target Windows and Windows Phone 7. The aim of this graphic engine is to allow for an easy creation of simle 2D games, game prototyping, and teaching of game development.SQL CRUD Expression Builder: A library to build sql crud commands that is based on expressions so every part of the sql statement could be an expression like ColumnSetExpression, FilterExpression, JoinExpression, etc, is intended to be agnostic but right now is being tested only with SqlServer and MySql.TDD-Katas: *TDD-Katas* simply defines the Test Driven Development Katas. In this, I tried to create most famous katas to understand what is exactly Kata. So, get into the code and let us know for any improvementTFS Team Project Manager: TFS Team Project Manager automates various tasks across Team Projects in Team Foundation Server. If you find yourself managing multiple Team Projects for an organization and have recurring tasks and questions that repeat themselves over and over again, Team Project Manager probably has some answers for you. Team Project Manager can help you... * Manage build process templates (understanding which build templates are used by which build definitions, uploading new build process templates,...USB Camera Driver for Windows Embedded Compact 7: This project helps people to get the USB camera working on the Windows Embedded Compact 7.This is modified source of the WinCE 6.0 USB Camera Shared source available from the following link http://www.microsoft.com/download/en/details.aspx?id=19512 User Profile with RecordID replicator: <User Profile with RecordID replicator> will let SharePoint 2010 administrators create a new Profile database maintaining the RecordId of the profile to make sure the social features (I like it, tags, notes) are not gone.VS Tool for WSS 3.0: Visual Studio (2005 and 2008) add-ons for WSS. Included: - schema.xml explorerWhs2Smugmug: Windows Home Server Add-In for uploading files to Smugmug. Written in C# using .Net 3.5 and WCF. Also using the Smugmug API Project. ??UBBCODE: PHP????UBBCODE????，??????： 1.??????（10px ? 24px）； 2.????； 3.?????； 4.??????； 5.??????； 6.??????（????????????）； 7.??????； 8.?????； 9.?????； 10.???QQ??，??????； 11.???????（?????，??????????）； 12.?????????； 13.????????； 14.?????????； 15.?????????； 16.?????????。

  Read the article

• CodePlex Daily Summary for Thursday, March 17, 2011

  CodePlex Daily Summary for Thursday, March 17, 2011Popular ReleasesLeage of Legends Masteries Tool: LoLMasterSave_v1.6.1.274: -Addresses resent LoL update that interfered with the way MasterSave sets / reads masteries - Removed Shift windows since some people experiencing issues If your interested in this function i can provide it as small separate tool.ASP.NET Comet Ajax Library (Reverse Ajax - Server Push): ASP.NET Server Push Samples: This package contains 14 sample projects.LogExpert: 1.4 build 4092: TabControl: Tooltip on dropdown list shows full path names now New menu item "Lock instance" in Options menu. Only available when "Allow only one instance" is disabled in the settings. "Lock instance" will temporary enable the single instance mode. The locked instance will receive all new launched files Some NullPtrExceptions fixed (e.g. in the settings dialog) Note: The debug build is identical to the release build. But the debug version writes a log file. It also contains line numbers ...Facebook C# SDK: 5.0.6 (BETA): This is seventh BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. New in this release: Version 5.0.6 is almost completely backward compatible with 4.2.1 and 5.0.3 (BETA) Bug fixes and helpers to simplify many common scenarios For more information about this release see the following blog posts: F...SQLCE Code Generator: Build 1.0.3: New beta of the SQLCE Code Generator. New features: - Generates an IDataRepository interface that contains the generated repository interfaces that represents each table - Visual Studio 2010 Custom Tool Support Custom Tool: The custom tool is called SQLCECodeGenerator. Write this in the Custom Tool field in the Properties Window of an SDF file included in your project, this should create a code-behind file for the generated data access codeDotNetNuke® Community Edition: 06.00.00 CTP: CTP 1 (Build 155) is firmly focused around our conversion to C#. As many people have noted, this is a significant change to the platform and affects all areas of the product. This is one of the driving factors in why we felt it was important to get this release into your hands as soon as possible. We have already done quite a bit of testing on this feature internally and have fixed a number of issues in this area. We also recognize that there are probably still some more bugs to be found ...Kooboo CMS: Kooboo 3.0 RC: Bug fixes Inline editing toolbar positioning for websites with complicate CSS. Inline editing is turned on by default now for the samplesite template. MongoDB version content query for multiple filters. . Add a new 404 page to guide users to login and create first website. Naming validation for page name and datarule name. Files in this download kooboo_CMS.zip: The Kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB ...SQL Monitor - tracking sql server activities: SQL Monitor 3.2: 1. introduce sql color syntax highlighting with http://www.codeproject.com/KB/edit/FastColoredTextBox_.aspxUmbraco CMS: Umbraco 4.7.0: Service release fixing 50+ issues! Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're available from: Introduction for webmasters: http://umbraco.tv/help-and-support/video-tutorials/getting-started Understand the Umbraco concepts: http://umbraco.tv/help-and-support...ProDinner - ASP.NET MVC EF4 Code First DDD jQuery Sample App: first release: ProDinner is an ASP.NET MVC sample application, it uses DDD, EF4 Code First for Data Access, jQuery and MvcProjectAwesome for Web UI, it has Multi-language User Interface Features: CRUD and search operations for entities Multi-Language User Interface upload and crop Images (make thumbnail) for meals pagination using "more results" button very rich and responsive UI (using Mvc Project Awesome) Multiple UI themes (using jQuery UI themes)BEPUphysics: BEPUphysics v0.15.1: Latest binary release. Version HistoryIronRuby: 1.1.3: IronRuby 1.1.3 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. The main purpose of this release is to sync with IronPython 2.7 release, i.e. to keep the Dynamic Language Runtime that both these languages build on top shareable. This release also fixes a few bugs: 5763 Use...SQL Server PowerShell Extensions: 2.3.2.1 Production: Release 2.3.2.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 13 modules with 163 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler, Oracle and MySQL and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.IronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??，????。??????????All-In-One Code Framework ???，??20?Sample！！????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??： CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??： FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Note: This release may say 4.0.21 in the version bar. This is a typo and the version is actually 4.1.0, not to be confused with 4.0.10 which was released a while back. Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Relea...New ProjectsAMWC: AMWCAny Repository Membership Provider: Any Repository Membership is about easing the writing of Custom Membership Providers for ASP.NET. With Any Repository Membership you will simply need Implement an interface with few methods to configure a Data Store. Conectors for SQL Server CE, Azure and MySql Planned.Award Citation Helper: This simple Silverlight application demonstrates key concepts including using isolated storage, Silverlight to HTML communications, observable collections and context menus. It is also useful as a tool for creating award citations for your own use or on the BrainyAwards.com site.Azure Storage Backup: Provides a backup and restore function for a Windows Azure storage account, including Table Storage and Blob Storage.Babil: Babil is aimed to be an open source web based portal for software localization. It will support importing and exporting different formats such as .resx files and GNU gettext. Another goal is to have some basic project management features for managing translators and changes. BuildExplorer: Analyze a TFS2010 build whether it is finished, hanging or in progress.DHM17438: DHM17438Flowmarks Events: Data entry tool for simple time series.Go to Browser - Visual Studio 2010 Extension: This is a visual studio 2010 extension, that goes to a web browser on your repository. In order to specify the url format, you have to go solution context menu > "Go to Browser...". It is also available through Visual Studio Gallery. (Comming soon)Hierarchical State Machine Compiler: This projects helps you to easily create and generate hierarchical state machine in .NET. State, transitions, conditions, action, state inheritance Silverlight generation MVVM support iLBC.NET: A port of the iLBC (internet Low Bitrate Codec) speech codec for .NET platform.JAMBE: Simple test project for JA-BulgariaSAY IT WITH CSS! Slide Show implemented as pure CSS3 / HTML 5 solution: The solution demonstrates CSS3 coding technique, which allows to implement online slide show with "darkbox" (or "lightbox") effects using pure CSS3 and HTML5; it does not require any Javascript/jQuery coding.SharePoint Test Data Tool: This project is basically a small window based application to be able to quickly populate items in a list/library. This can be helpful while testing your code bits ( WP's etc ) Shiros: Una idea que empezó en un Japo de Seattle.TwitterOnSQLAzure: Twitter Parser used for 24 Hours of SQL Pass presentation March 2011. Pulls and parses tweet stream, based on parameters, builds database (locally). All features compliant with SQL Azure. Use SQL Azure migration wizard to move data / schema to cloud - or chg conn stringVisio Forward Engineer Addin: Somehow Microsoft decided not to include this feature in 2010 version of Visio. Visio Forward Engineer Addin for Visio 2010, adds the ability to generate the database scripts directly from the database model defined in Visio 2010. It is developed in C#.Winwise Surface & Tablet AR Drone: This is the Surface & Tablet client to pilot a Parrot AR Drone.WNY: Online gaming system that support multiple usersWow Project: Wow Project is a tool for wow users to easy manage quests and items. It's writen in VB.NET or C#

  Read the article

• CodePlex Daily Summary for Saturday, June 11, 2011

  CodePlex Daily Summary for Saturday, June 11, 2011Popular ReleasesSimplePlanner: v2.0b: For 2011-2012 Sem 1 ???2011-2012 ????Econ NetVert: 2.4.2.14 Production: Many thanks to paulhickman for testing and reporting issues. - this release has lots of bugfixes in codeconversion when using NRefactory 4.0 (local) and VisualStudio Projects conversionVisual Studio 2010 Help Downloader: 1.0.0.3: Domain name support for proxy Cleanup old packages bug Writing to EventLog with UAC enabled bug Small fixes & RefactoringMedia Companion: MC 3.406b weekly: With this version change a movie rebuild is required when first run -else MC will lock up on exit. Extract the entire archive to a folder which has user access rights, eg desktop, documents etc. Refer to the documentation on this site for the Installation & Setup Guide Important! If you find MC not displaying movie data properly, please try a 'movie rebuild' to reload the data from the nfo's into MC's cache. Fixes Movies Readded movie preference to rename invalid or scene nfo's to info ext...SCCM Client Actions Tool: SCCM Client Actions Tool v0.5.1: SCCM Client Actions Tool v0.5.1 is currently the most stable version and includes all of the functionality requested so far. It comes with following changes since last version: Fixed an incorrect path to x64 client setup folder. It comes as a ZIP file that contains three files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively a...Windows Azure VM Assistant: AzureVMAssist V1.0.0.5: AzureVMAssist V1.0.0.5 (Debug) - Test Release VersionSizeOnDisk: 1.8.0.3: Fix (issue 317): Main window icon loading error on windows server 2003 32bit runing on x86 cpu. Bypass of the Microsoft windows comexception.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9: Changes: - fix examples (include issue 16026) - add new examples - 32Bit/64Bit Walkthrough is now available in technical Documentation. Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...Reusable Library: V1.1.3: A collection of reusable abstractions for enterprise application developerClosedXML - The easy way to OpenXML: ClosedXML 0.54.0: New on this release: 1) Mayor performance improvements. 2) AdjustToContents now take into account the text rotation. 3) Fixed issues 6782, 6784, 6788HTML-IDEx: HTML-IDEx .15 ALPHA: This release fixes line counting a little bit and adds the masshighlight() sub, which highlights pasted and inserted code.AutoLoL: AutoLoL v2.0.3: - Improved summoner spells are now displayed - Fixed some of the startup errors people got - Double clicking an item selects it - Some usability changes that make using AutoLoL just a little easier - Bug fixes AutoLoL v2 is not an update, but an entirely new version! Please install to a different directory than AutoLoL v1Host Profiles: Host Profiles 1.0: Host Profiles 1.0 Release Quickly modify host file Automatically flush dnsVidCoder: 0.9.2: Updated to HandBrake 4024svn. This fixes problems with mpeg2 sources: corrupted previews, incorrect progress indicators and encodes that incorrectly report as failed. Fixed a problem that prevented target sizes above 2048 MB.SharePoint Search XSL Samples: SharePoint 2010 Samples: I have updated some of the samples from the 2007 release. These all work in SharePoint 2010. I removed the Pivot on File Extension because SharePoint 2010 search has refiners that perform the same function.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????VFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishShowUI: Write-UI -in PowerShell: ShowUI: ShowUI is a PowerShell module to help you write rich user interfaces in script.SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.0.3: Fixed User Management screen when "RequiresQuestionAndAnswer" set to true Reply to Email Address can now be customized User Management page now only displays users that reside in the membership database Web parts have been changed to inherit from System.Web.UI.WebControls.WebParts.WebPart, so that they will display on anonymous application pages For installation and configuration steps see here.TerrariViewer: TerrariViewer v2.5: Added new items associated with Terraria v1.0.3 to the character editor. Fixed multiple bugs with Piggy Bank EditoryNew Projects.NET MVC Base by OST: The OST .NET MVC project is currently in infancy but contains html helper extensions, model binders and other extensions to the mvc 3 framework. It also contains a separate project for easily consuming JQGrid requests and return the correct JSON to the jQuery plugin.Asterisk AMI Proxy suite: The AMI Proxy suite project will bridge the gap between your asterisk phone system and your windows based applications. The AMI Proxy is a service that can be used to simply proxy AMI connections to your asterisk server but also adds call stat generation and line monitors.Augusta Developers Guild: The web site for the user group Augusta Developers GuildAzure Blob Pusher: File uploader allows bulk upload of files from client to Azure blob storage. FileSystemWatcher notices new files in configured directory. SQL Express database tracks files as they are pushed up to blob storage and then processed. Local Directory is cleaned up after acknowledgement.Basic Class Library: A collection of functions created to eased up the programmers life in order to solved basic task like validation, AmountTowords, Encrypt & Decryption it also has capability to Connect and retrieve sql data just in one line of code, and some other Basic but very Important task.Basic RTS Game using RolePlayingGame Tool kit based XNA: this is a basic RTS Game. i can make it easy by using RolePlayingGame Took Kit based XNA.Batch Scheduler using .Net 4, MEF and Entity framework 4.1 (Magic Unicorn): Simple Batch Architecture written on C#. Uses the .NET 4, MEF and Entity Framework 4.1 Code First. If you dont need a scheduler, just use the sample code. Agents can be scheduled through a central database table. Plug-ins (or jobs) are launched through MEF. DropBox Linker: The goal of DropBox Linker project is to improve DropBox service client usability. It intellectually automates copying URLs to clipboard after publishing a file. Multiple files at once is supported. Additionally, it corrects URL on file rename after its link been copied.Exchange Spigot for NodeXL: Exchange Spigot for NodeXL enables Microsoft Excel plugin NodeXL to collect messaging data from the Microsoft Exchange Server and display that data as a graph. It is developed in C#.G - Low Level Graphics API: A low level graphics api, in similar style to OpenGL, but more OO. Can drastically speed up OpenGL based apps. Makes full use of Net4.0 features such as lambada expressions where useful. (C#, OpenTK powered. This is not for C++) GpgAPI - A C# Api for Gpg: GpgAPI is a C# API for Gpg. Gpg is a command line software to encrypt, decrypt files with a symmetric or assymetric key. You can also managed public keys, import keys from the web, export your public keys, etc. GpgAPI is an interface to Gpg. In C#, with a few lines, you can execute gpg to encrypt, decrypt, etc. The license of this project is "GPL v3"; it is NOT GPL v2. GPL v3 is not present in the licenses list so I had to choose GPL v2. So if use GpgAPI, you must accept the GPL v...iDreamBoard: iDreamBoard is an application to ease the process of creating and editing dreamboard themes for iOS devices. UNDER DEVELOPMENTIETouch: Use IE Touch to access multitouch events from JavaScript in IE. This project uses some of the code from Windows 7 Multitouch .NET Interop Sample Library available in http://archive.msdn.microsoft.com/WindowsTouch/Release/ProjectReleases.aspx?ReleaseId=2127iMaker-Lion: Applications post installation pour Mac OS X sur PC.Informatic System Ma Chung University Alumni Center: Informatic System Ma Chung University Alumni Center is a website for alumni at Information System Faculty at Ma Chung University at Malang, IndonesiaJasc (just another script compressor): Just another script compressor, but that's by far the easiest to use! Use Jasc to merge compress your javascript (JS) and style sheets (CSS). Just drop the executable in your javascript / CSS folder and run it. Voyla! It will handle everything by itself. Compression is based on Microsoft Ajax Minifier. Jasc can handle single or multiple files, will accept regular expressions to remove specific lines from the source code, and can also optimize the results by shrinking variable names and twe...LINQ Extensions Library: A library of useful LINQ extensions allowing for arithmetic manipulation of sequences, statistical analysis, sequence generation, sequence manipulation, pattern detection and more.Mail2FotoFrame: Pulls emails from a POP3-Account, extracts picture-attachments and saves them to a SD-card, so you can view them on a fotoframe.Make web (or sharepoint) pages screenshots with Powershell: From a text file containing url, make screenshot of each page. This powershell script use iecapt.exe project. You can manage width format and delay for each captureModé Internationalé (E-Commerce Site): Mode International is a fictional clothing store, and this website project is meant to be the e-Commerce site for this store. So far, the project has been developed using Java Enterprise Edition and Sockets, but I am considering making the use of C# in ASP .NET in the future.Music House: Site dedicado a musica e afiliadosNiphor's ToolBox: ?????????Nordic nRF24L01+ .NET Micro Framework Driver: Library that enables .NET Micro Framework developers to use Nordic 2.4 GHz wireless tranceivers. This library can be used on any net mf device with SPI interface.Petey's Game Engine: Petey's Game Engine is a XNA 4.0 game engine with a featured blog describing each step of the development. This is a learning project so people may follow and learn as my project evolves.ReportGenerator: ReportGenerator converts XML reports generated by PartCover or NCover into a readable HTML report.Rise of the rabbits: Rise of the RabbitsSapaFinance: SapaFinanceSCSM Copy Object: SCSM Copy Object is a CodePlex project that enables users to select objects in the System Center Service Manager console, click a task in the task pane and create a copy of the selected object(s). Objects can also be copied from command line executables.SharePoint 2010 Language Pack Downloader: SharePoint 2010 Language Pack Downloader is a tool to quickly download multiple language pack files for the SharePoint 2010 Server platform.SharePoint XQuery Reporting Solution: My company's project needs this technology because of the current company has a lot of data is stored in SharePoint, through Infopath data collection, data storage and not all InfoPath field values ​​are saved into a database, a considerable number of data in XML File, which caused difficulties in query and print a report, need a solution. Simply explained the thinking: First step:Put SharePoint, InfoPath XML file later (I did a small tool XMLToDB) or through the Event Handle sync sav...The Pacman: A simple single player game similar to Pacman. Developed using XNA game framework and C#. Game demonstrates usage of fuzzy logic for controlling the AI ghosts. This game is developed to test the effect of fuzzy logic AI in Pacman game.TodoStrike: Todo Strike is a simple todo list keeper.WallpaperDeleter: Simple program to delete the current background wallpaper image.Windows Phone 7 Continuous Integration Testing Framework: WP7 CI is a port of the Silverlight Toolkit Test Framework with added CI support, allowing tests to be run in the emulator from the command lineWolfpack - Distributed System Monitoring: Wolfpack is an extensible, .Net windows service framework for running jobs to monitor your software, system & business KPI's. The data collected can be sent directly to Growl, Geckoboard, WCF, SQL, SQLite, NServiceBus. It comes loaded with some tasks but it's simple to implement your own!

  Read the article

• CodePlex Daily Summary for Tuesday, May 15, 2012

  CodePlex Daily Summary for Tuesday, May 15, 2012Popular Releases51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.4.9: One Click Install from NuGet Data ChangesIncludes 42 new browser properties in both the Lite and Premium data sets. Premium Data includes many new devices including Nokia Lumia 900, BlackBerry 9220 and HTC One, the Samsung Galaxy Tab 2 range and Samsung Galaxy S III. Lite data includes devices released in January 2012. Changes to Version 2.1.4.91. Added Microsoft.Web.Infrastructure.DynamicModuleHelper back into Activator.cs to ensure redirection works when .NET 4 PreApplicationStart use...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.52: Make preprocessor comment-statements nestable; add the ///#IFNDEF statement. (Discussion #355785) Don't throw an error for old-school JScript event handlers, and don't rename them if they aren't global functions.DotNetNuke® Events: 06.00.00: This is a serious release of Events. DNN 6 form pattern - We have take the full route towards DNN6: most notably the incorporation of the DNN6 form pattern with streamlined UX/UI. We have also tried to change all formatting to a div based structure. A daunting task, since the Events module contains a lot of forms. Roger has done a splendid job by going through all the forms in great detail, replacing all table style layouts into the new DNN6 div class="dnnForm XXX" type of layout with change...LogicCircuit: LogicCircuit 2.12.5.15: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing one but nasty bug. Two functions XOR and XNOR when used with 3 or more inputs were incorrectly evaluating their results. If you have a circuit that is using these functions...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.1: Two fixes: Rar Decompression bug fixed. Error only occurred on some files Rar Decompression will throw an exception when another volume isn't found but one is expected.?????????? - ????????: All-In-One Code Framework ??? 2012-05-14: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ???OneCode??????，??????????6????Microsoft OneCode Sample，????2?Data Platform Sample?4?WPF Sample。???????????。 ????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Data Platform Sample CSUseADO CppUseADO WPF Sample CSWPFMasterDetailBinding VBWPFMasterDetailBinding CSWPFThreading VBWPFThreading ....... ???????????blog： ??，??????MSD...ZXMAK2: Version 2.6.1.7: - fix tape bug: cannot select block 0 to playLINQ to Twitter: LINQ to Twitter Beta v2.0.25: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, Client Profile, and Windows 8. 100% Twitter API coverage. Also available via NuGet! Follow @JoeMayo.ASP.net MVC HTML5 Helpers Toolkit: ASP.net MVC HTML5 Toolkit: 14th May 2012 MVC HTML5 Helpers Toolkit .NET 4 - Binary – Source code and sample site Update 14/05/2012 - Updated demo project to use MVC4 and Twitter Bootstrap. Password input type has also been added to the list.GAC Explorer: GACExplorer_x86_Setup: Version 1.0 Features -> Copy assembly(s) to clipboard. -> Copy assembly(s) to local folder. -> Open assembly(s) folder location. -> Support Shortcut keysBlogEngine.NET: BlogEngine.NET 2.6: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info BlogEngine.NET Hosting - 3 months free! Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take...BlackJumboDog: Ver5.6.2: 2012.05.07 Ver5.6.2 (1)　Web???????、????????·????????? (2)　Web???????、?????????? COMSPEC PATHEXT WINDIR SERVERADDR SERVERPORT DOCUMENTROOT SERVERADMIN REMOTE_PORT HTTPACCEPTCHRSET HTTPACCEPTLANGUAGE HTTPACCEPTEXCODINGGardens Point Parser Generator: Gardens Point Parser Generator version 1.5.0: ChangesVersion 1.5.0 contains a number of changes. Error messages are now MSBuild and VS-friendly. The default encoding of the *.y file is Unicode, with an automatic fallback to the previous raw-byte interpretation. The /report option has been improved, as has the automaton tracing facility. New facilities are included that allow multiple parsers to share a common token type. A complete change-log is available as a separate documentation file. The source project has been upgraded to Visual...Media Companion: Media Companion 3.502b: It has been a slow week, but this release addresses a couple of recent bugs: Movies Multi-part Movies - Existing .nfo files that differed in name from the first part, were missed and scraped again. Trailers - MC attempted to scrape info for existing trailers. TV Shows Show Scraping - shows available only in the non-default language would not show up in the main browser. The correct language can now be selected using the TV Show Selector for a single show. General Will no longer prompt for ...NewLife XCode ??????: XCode v8.5.2012.0508、XCoder v4.7.2012.0320: X????： 1，????For .Net 4.0?? XCoder????： 1，???????，????X????，?????? XCode????： 1，Insert/Update/Delete???????????????，???SQL???? 2，IEntityOperate?????? 3，????????IEntityTree 4，????????????????? 5，?????????? 6，??????????????Google Book Downloader: Google Books Downloader Lite 1.0: Google Books Downloader Lite 1.0Python Tools for Visual Studio: 1.5 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports Cpython, IronPython, Jython and Pypy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging...AD Gallery: AD Gallery 1.2.7: NewsFixed a bug which caused the current thumbnail not to be highlighted Added a hook to take complete control over how descriptions are handled, take a look under Documentation for more info Added removeAllImages()WebsitePanel: 1.2.2: This build is for Beta Testing only. DO NOT USE IN PRODUCTION. The following work items has been fixed/closed in WebsitePanel 1.2.2.1: 225 135 59 96 23 29 191 72 48 240 245 244 160 16 65 7 156AcDown????? - Anime&Comic Downloader: AcDown????? v3.11.6: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...New ProjectsAspose.Words for Java Examples: This project contains example code for Aspose.Words for Java. Aspose.Words is a class library for generating, converting and rendering wordprocessing documents. Aspose.Words supports DOC, OOXML, RTF, HTML, MHTML, TXT, OpenDocument, PDF, XPS, EPUB, SWF, SVG, Image, printing and other formats.Bilingual Text Matching: This project is to extract bilingual sentence pairs from text. As an important basic module, it is widely applied in many different tasks in natural language process field(NLP), such as machine translation, search engine, language study and so on.bitboxx bbnews: The bitboxx bbnews module is a DNN module for collecting and providing news on your portal. It is able to collect news from a RSS/Atom feeds or from twitter. Alternativeliy you can write your own news. News display is full templated and could be provided as RSS feed too.BlackCat: Easy-to-use tool to check, create and generate encryption data. You can: - generate RSA Keypairs for keysize 1024, 2048, 4096, 8192 bytes. - generate MD5 String Hash - compare MD5 String Hash Checksums - generate MD5 and SHA1 File Hash - compare MD5 and SHA1 File Checksums That's it!BoardSpace.net Hive Games Reviewer (Ultimate Edition): BoardSpace.net Hive Games Reviewer (Ultimate Edition)Consistent Hash: Enterprise Consistent Hash (ECH) is a consistent hashing library written in C#. It is tested to be used at production level and supports N number of nodes (servers); while most of the hashing implement out there only support limited number of nodes in the hash space to achieve the required performance speed. ESH provide the following features: 1. High performance, it implements Fowler–Noll–Vo hash algorithm by overcoming all its weakness defined in the algorithm. This implementation might...Data Mining Add-Ins for Excel Sample Data (includes Call Center): Data Mining Add-Ins for Excel Sample Data (includes Call Center) sample workbook is an update to the sample workbook that is installed when you download and install the Data Mining Add-ins. The update includes additional data that supports the Goal Seek Analysis tool, and caElectronic Diary: Electronic DiaryFileZilla Server Config File Editor: A simple program for editing FileZilla Server config file. A co-worker manages a Filezilla FTP server on Windows Server 2008. He would like to give a few people the ability to add/delete users and to grant rights for various download subfolders. He showed me the steps he has to go through to perform the tasks listed above, and felt it could be error-prone for others. So he gave me the config file ("FileZilla Server.xml") as a template to build this application for him.FIM Ultimate File Connector: Project providing an Extensible Connectivity 2.0 (ECMA) File Connector (previously Management Agent). Just the basic File Connector supporting the following OOB file formats: *Attribute Value Pair (AVP) *Delimited *Directory Services Markup Language (DSML) *Fixed *LDAP Data Interchange Format (LDIF) But has the following extra functionality: *Full Export that before ECMA had to be handled externally from FIM/ILM/MIIS *Files can be managed at FTP, FTPS, SFTP, SCP and File System ...GAC Explorer: This application can be used by DotNet Developers to download assembly(s) from Global Assembly Cache (GAC). It contains features like Copy Assembly(s) to Clipboard or Copy to some Folder in Local Machine. Best part it supports DotNet 4.0 GAC structure.GPX.NET: GPX.NET provides a set of C# classes for the GPX (GPS eXchange Format) standard. It offers a full implementation of the V1.1 standard in a clean and straightforward way using the native .NET XmlSerializer. Reading, writing and a programmatic document object model are supported.gscirc: IRC client for windows. Hard-ceded string finder: This project can help to C# developers move hard-coded string to resources file (in existing or newly generated by this program). Also it has ability to search duplicated string s in resources and source file.Image Popup Module dotnetnuke: Image Pop-up Module is a module to show image light-box pop ups in dotnetnuke websites Please Follow the steps to use this module 1 Install the module and drop on your page where you want to show the pop up 2 In your HTML module editor add the token "{imagepopup}" 3 In your HTML module editor add class="popup-img" in your images which you want to show in popup.Intercom: Intercom is a comprehensive C# API wrapper library for accessing the Intercom.IO APILakana - WPF Navigation Framework: A lightweight and powerful navigation framework for WPF.Mageris: MagerisMaLoRTLib: raytracer library used in the MaLoRT.SGP - SISTEMA DE GESTÃO PAROQUIAL: SGP - SISTEMA DE GESTÃO PAROQUIAL - VERSION 1.0Silva PeerChannel: This is a simple project using the new "Peer Channel" Technology provided by Microsoft it is an ideal project & sample for developers who wants to start developing in this area (Network) Some feature of this project: 1.Chat with unlimited clients (Chat room) 2.Send/Receive unlimited file between unlimited clients. (TCP) 3.Download files from internet 4.Search and select files to download (P2P) All the source of project is full of comments to understand every single line of code...Silver Desktop: SDSimple Hit Counter WebPart SharePoint 2010: HitCounterWebPart.wsp HitCounterWebPart Source CodeSimpleRX: SimpleRX is a educational project that shows a possible implementation of many rx commands. SimpleRX should stimulate a study with the reactive extensions. It is also a guard to extend the reactive extensions with custom commands. A introduction to simpleRX can be found at: netmatze.wordpress.com Skill Studio: Skill Studio is a Visual Code Generator for Unity. (http://unity3d.com/unity/) By now it can generate BehaviorTree and AnimationTree visually.TaskMgr2: TestTeam Foundation Server overview: This application basically just allows you to open several Team Foundation Server windows on your secondary monitor that you use a lot, so that you can enjoy task management the easy way.TongjiXuanke: An Hacker-programme for xuanke Platform of Tongji University (Shanghai,China) Visual C++ 2010 Directories Editor: Path editor of include, library, source and etc. foldersVisual Coder: VSCWirelessNetworkDetection: Project to find all your wireless access pointswith connected clients.X Window System for COSMOS: This is a project meant to provide a GUI for COSMOS. It is built upon version 89858 of COSMOS kernel and provided in .dll form that expose the most common methods to create dialog/modal windows with drag&drop, re-size, open/close facilities. This solution bases on a double-linked list principle, recursively parsing the hierarchy of windows in both ways. This allows dynamic allocation of memory for an infinite number of windows, screen refresh and active window sensitivity.

  Read the article

• Testing Entity Framework applications, pt. 3: NDbUnit

  - by Thomas Weller

  This is the third of a three part series that deals with the issue of faking test data in the context of a legacy app that was built with Microsoft's Entity Framework (EF) on top of an MS SQL Server database – a scenario that can be found very often. Please read the first part for a description of the sample application, a discussion of some general aspects of unit testing in a database context, and of some more specific aspects of the here discussed EF/MSSQL combination. Lately, I wondered how you would ‘mock’ the data layer of a legacy application, when this data layer is made up of an MS Entity Framework (EF) model in combination with a MS SQL Server database. Originally, this question came up in the context of how you could enable higher-level integration tests (automated UI tests, to be exact) for a legacy application that uses this EF/MSSQL combo as its data store mechanism – a not so uncommon scenario. The question sparked my interest, and I decided to dive into it somewhat deeper. What I've found out is, in short, that it's not very easy and straightforward to do it – but it can be done. The two strategies that are best suited to fit the bill involve using either the (commercial) Typemock Isolator tool or the (free) NDbUnit framework. The use of Typemock was discussed in the previous post, this post now will present the NDbUnit approach... NDbUnit is an Apache 2.0-licensed open-source project, and like so many other Nxxx tools and frameworks, it is basically a C#/.NET port of the corresponding Java version (DbUnit namely). In short, it helps you in flexibly managing the state of a database in that it lets you easily perform basic operations (like e.g. Insert, Delete, Refresh, DeleteAll)  against your database and, most notably, lets you feed it with data from external xml files. Let's have a look at how things can be done with the help of this framework. Preparing the test data Compared to Typemock, using NDbUnit implies a totally different approach to meet our testing needs.  So the here described testing scenario requires an instance of an SQL Server database in operation, and it also means that the Entity Framework model that sits on top of this database is completely unaffected. First things first: For its interactions with the database, NDbUnit relies on a .NET Dataset xsd file. See Step 1 of their Quick Start Guide for a description of how to create one. With this prerequisite in place then, the test fixture's setup code could look something like this: [TestFixture, TestsOn(typeof(PersonRepository))] [Metadata("NDbUnit Quickstart URL",           "http://code.google.com/p/ndbunit/wiki/QuickStartGuide")] [Description("Uses the NDbUnit library to provide test data to a local database.")] public class PersonRepositoryFixture {     #region Constants     private const string XmlSchema = @"..\..\TestData\School.xsd";     #endregion // Constants     #region Fields     private SchoolEntities _schoolContext;     private PersonRepository _personRepository;     private INDbUnitTest _database;     #endregion // Fields     #region Setup/TearDown     [FixtureSetUp]     public void FixtureSetUp()     {         var connectionString = ConfigurationManager.ConnectionStrings["School_Test"].ConnectionString;         _database = new SqlDbUnitTest(connectionString);         _database.ReadXmlSchema(XmlSchema);         var entityConnectionStringBuilder = new EntityConnectionStringBuilder         {             Metadata = "res://*/School.csdl|res://*/School.ssdl|res://*/School.msl",             Provider = "System.Data.SqlClient",             ProviderConnectionString = connectionString         };         _schoolContext = new SchoolEntities(entityConnectionStringBuilder.ConnectionString);         _personRepository = new PersonRepository(this._schoolContext);     }     [FixtureTearDown]     public void FixtureTearDown()     {         _database.PerformDbOperation(DbOperationFlag.DeleteAll);         _schoolContext.Dispose();     }     ...  As you can see, there is slightly more fixture setup code involved if your tests are using NDbUnit to provide the test data: Because we're dealing with a physical database instance here, we first need to pick up the test-specific connection string from the test assemblies' App.config, then initialize an NDbUnit helper object with this connection along with the provided xsd file, and also set up the SchoolEntities and the PersonRepository instances accordingly. The _database field (an instance of the INdUnitTest interface) will be our single access point to the underlying database: We use it to perform all the required operations against the data store. To have a flexible mechanism to easily insert data into the database, we can write a helper method like this: private void InsertTestData(params string[] dataFileNames) {     _database.PerformDbOperation(DbOperationFlag.DeleteAll);     if (dataFileNames == null)     {         return;     }     try     {         foreach (string fileName in dataFileNames)         {             if (!File.Exists(fileName))             {                 throw new FileNotFoundException(Path.GetFullPath(fileName));             }             _database.ReadXml(fileName);             _database.PerformDbOperation(DbOperationFlag.InsertIdentity);         }     }     catch     {         _database.PerformDbOperation(DbOperationFlag.DeleteAll);         throw;     } } This lets us easily insert test data from xml files, in any number and in a  controlled order (which is important because we eventually must fulfill referential constraints, or we must account for some other stuff that imposes a specific ordering on data insertion). Again, as with Typemock, I won't go into API details here. - Unfortunately, there isn't too much documentation for NDbUnit anyway, other than the already mentioned Quick Start Guide (and the source code itself, of course) - a not so uncommon problem with smaller Open Source Projects. Last not least, we need to provide the required test data in xml form. A snippet for data from the People table might look like this, for example: <?xml version="1.0" encoding="utf-8" ?> <School xmlns="http://tempuri.org/School.xsd">   <Person>     <PersonID>1</PersonID>     <LastName>Abercrombie</LastName>     <FirstName>Kim</FirstName>     <HireDate>1995-03-11T00:00:00</HireDate>   </Person>   <Person>     <PersonID>2</PersonID>     <LastName>Barzdukas</LastName>     <FirstName>Gytis</FirstName>     <EnrollmentDate>2005-09-01T00:00:00</EnrollmentDate>   </Person>   <Person>     ... You can also have data from various tables in one single xml file, if that's appropriate for you (but beware of the already mentioned ordering issues). It's true that your test assembly may end up with dozens of such xml files, each containing quite a big amount of text data. But because the files are of very low complexity, and with the help of a little bit of Copy/Paste and Excel magic, this appears to be well manageable. Executing some basic tests Here are some of the possible tests that can be written with the above preparations in place: private const string People = @"..\..\TestData\School.People.xml"; ... [Test, MultipleAsserts, TestsOn("PersonRepository.GetNameList")] public void GetNameList_ListOrdering_ReturnsTheExpectedFullNames() {     InsertTestData(People);     List<string> names =         _personRepository.GetNameList(NameOrdering.List);     Assert.Count(34, names);     Assert.AreEqual("Abercrombie, Kim", names.First());     Assert.AreEqual("Zheng, Roger", names.Last()); } [Test, MultipleAsserts, TestsOn("PersonRepository.GetNameList")] [DependsOn("RemovePerson_CalledOnce_DecreasesCountByOne")] public void GetNameList_NormalOrdering_ReturnsTheExpectedFullNames() {     InsertTestData(People);     List<string> names =         _personRepository.GetNameList(NameOrdering.Normal);     Assert.Count(34, names);     Assert.AreEqual("Alexandra Walker", names.First());     Assert.AreEqual("Yan Li", names.Last()); } [Test, TestsOn("PersonRepository.AddPerson")] public void AddPerson_CalledOnce_IncreasesCountByOne() {     InsertTestData(People);     int count = _personRepository.Count;     _personRepository.AddPerson(new Person { FirstName = "Thomas", LastName = "Weller" });     Assert.AreEqual(count + 1, _personRepository.Count); } [Test, TestsOn("PersonRepository.RemovePerson")] public void RemovePerson_CalledOnce_DecreasesCountByOne() {     InsertTestData(People);     int count = _personRepository.Count;     _personRepository.RemovePerson(new Person { PersonID = 33 });     Assert.AreEqual(count - 1, _personRepository.Count); } Not much difference here compared to the corresponding Typemock versions, except that we had to do a bit more preparational work (and also it was harder to get the required knowledge). But this picture changes quite dramatically if we look at some more demanding test cases: Ok, and what if things are becoming somewhat more complex? Tests like the above ones represent the 'easy' scenarios. They may account for the biggest portion of real-world use cases of the application, and they are important to make sure that it is generally sound. But usually, all these nasty little bugs originate from the more complex parts of our code, or they occur when something goes wrong. So, for a testing strategy to be of real practical use, it is especially important to see how easy or difficult it is to mimick a scenario which represents a more complex or exceptional case. The following test, for example, deals with the case that there is some sort of invalid input from the caller: [Test, MultipleAsserts, TestsOn("PersonRepository.GetCourseMembers")] [Row(null, typeof(ArgumentNullException))] [Row("", typeof(ArgumentException))] [Row("NotExistingCourse", typeof(ArgumentException))] public void GetCourseMembers_WithGivenVariousInvalidValues_Throws(string courseTitle, Type expectedInnerExceptionType) {     var exception = Assert.Throws<RepositoryException>(() =>                                 _personRepository.GetCourseMembers(courseTitle));     Assert.IsInstanceOfType(expectedInnerExceptionType, exception.InnerException); } Apparently, this test doesn't need an 'Arrange' part at all (see here for the same test with the Typemock tool). It acts just like any other client code, and all the required business logic comes from the database itself. This doesn't always necessarily mean that there is less complexity, but only that the complexity happens in a different part of your test resources (in the xml files namely, where you sometimes have to spend a lot of effort for carefully preparing the required test data). Another example, which relies on an underlying 1-n relationship, might be this: [Test, MultipleAsserts, TestsOn("PersonRepository.GetCourseMembers")] public void GetCourseMembers_WhenGivenAnExistingCourse_ReturnsListOfStudents() {     InsertTestData(People, Course, Department, StudentGrade);     List<Person> persons = _personRepository.GetCourseMembers("Macroeconomics");     Assert.Count(4, persons);     Assert.ForAll(         persons,         @p => new[] { 10, 11, 12, 14 }.Contains(@p.PersonID),         "Person has none of the expected IDs."); } If you compare this test to its corresponding Typemock version, you immediately see that the test itself is much simpler, easier to read, and thus much more intention-revealing. The complexity here lies hidden behind the call to the InsertTestData() helper method and the content of the used xml files with the test data. And also note that you might have to provide additional data which are not even directly relevant to your test, but are required only to fulfill some integrity needs of the underlying database. Conclusion The first thing to notice when comparing the NDbUnit approach to its Typemock counterpart obviously deals with performance: Of course, NDbUnit is much slower than Typemock. Technically,  it doesn't even make sense to compare the two tools. But practically, it may well play a role and could or could not be an issue, depending on how much tests you have of this kind, how often you run them, and what role they play in your development cycle. Also, because the dataset from the required xsd file must fully match the database schema (even in parts that otherwise wouldn't be relevant to you), it can be quite cumbersome to be in a team where different people are working with the database in parallel. My personal experience is – as already said in the first part – that Typemock gives you a better development experience in a 'dynamic' scenario (when you're working in some kind of TDD-style, you're oftentimes executing the tests from your dev box, and your database schema changes frequently), whereas the NDbUnit approach is a good and solid solution in more 'static' development scenarios (when you need to execute the tests less frequently or only on a separate build server, and/or the underlying database schema can be kept relatively stable), for example some variations of higher-level integration or User-Acceptance tests. But in any case, opening Entity Framework based applications for testing requires a fair amount of resources, planning, and preparational work – it's definitely not the kind of stuff that you would call 'easy to test'. Hopefully, future versions of EF will take testing concerns into account. Otherwise, I don't see too much of a future for the framework in the long run, even though it's quite popular at the moment... The sample solution A sample solution (VS 2010) with the code from this article series is available via my Bitbucket account from here (Bitbucket is a hosting site for Mercurial repositories. The repositories may also be accessed with the Git and Subversion SCMs - consult the documentation for details. In addition, it is possible to download the solution simply as a zipped archive – via the 'get source' button on the very right.). The solution contains some more tests against the PersonRepository class, which are not shown here. Also, it contains database scripts to create and fill the School sample database. To compile and run, the solution expects the Gallio/MbUnit framework to be installed (which is free and can be downloaded from here), the NDbUnit framework (which is also free and can be downloaded from here), and the Typemock Isolator tool (a fully functional 30day-trial is available here). Moreover, you will need an instance of the Microsoft SQL Server DBMS, and you will have to adapt the connection strings in the test projects App.config files accordingly.

  Read the article

• CodePlex Daily Summary for Friday, March 18, 2011

  CodePlex Daily Summary for Friday, March 18, 2011Popular ReleasesCraig's Utility Library: Craig's Utility Library 2.1: This update contains the following functionality additions: Added Min and Max functions to MathHelper Added code for handling comments to BlogML code. Added WMI based file search ability (at present only searches based on file extension). Added CellularTexture class Added FaultFormation class Added PerlinNoise class Added Akismet helper classes Added Gravatar image link generator Added PipeDelimited class Added FaultFormation class Added FluvialErosion functions to Image c...DirectQ: Release 1.8.7 (RC3): Release Candidate 3 of 1.8.7 fixing many bugs and adding some new functionality.Catel - WPF, Silverlight and WP7 MVVM library: 1.3: Catel history ============= (+) Added (*) Changed (-) Removed (x) Error / bug (fix) For more information about issues or new feature requests, please visit: http://catel.codeplex.com =========== Version 1.3 =========== Release date: ============= 2011/03/18 Added/fixed: ============ (+) Added BindingHelper class to evaluate binding values manually (+) UserControl<TViewModel> now supports master-detail views where the detail view would have a nested UserControl<TViewModel> and no parent ...CBM-Command: Version 2.0 - 2011-03-17 - Final Release: This is the final release of CBM-Command Version 2.0. This version is intended to replace all prior versions you may have downloaded. Please see release notes for prior versions to get comprehensive list of changes. New features since RC1: - (C64) Added double-buffering when displaying the directory in a panel. This eliminates the flickering that users were experiencing when scrolling through long directories. Changes since RC1: - (All Machines) Changed the algorithm for displaying the d...Phalanger - The PHP Language Compiler for the .NET Framework: 2.1 (March 2011) for .NET 4.0: Introducing release of Phalanger 2.1 for .NET 4.0. This release brings big performance boost about 20% in most of the operations. This improvement can be expected also in an overall performance in many PHP applications, e.g. Wordpress. It is the first release that targets .NET Framework 4.0 which allows developers to move the project forward. To migrate your old Phalanger applications from Phalanger 2.0 to 2.1 please follow Migration to 2.1. Installation package also includes basic version o...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.164: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds new layout options for groups, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Wi...Leage of Legends Masteries Tool: LoLMasterSave_v1.6.1.274: -Addresses resent LoL update that interfered with the way MasterSave sets / reads masteries - Removed Shift windows since some people experiencing issues If your interested in this function i can provide it as small separate tool.ASP.NET Comet Ajax Library (Reverse Ajax - Server Push): ASP.NET Server Push Samples: This package contains 14 sample projects.LogExpert: 1.4 build 4092: TabControl: Tooltip on dropdown list shows full path names now New menu item "Lock instance" in Options menu. Only available when "Allow only one instance" is disabled in the settings. "Lock instance" will temporary enable the single instance mode. The locked instance will receive all new launched files Some NullPtrExceptions fixed (e.g. in the settings dialog) Note: The debug build is identical to the release build. But the debug version writes a log file. It also contains line numbers ...Facebook C# SDK: 5.0.6 (BETA): This is seventh BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. New in this release: Version 5.0.6 is almost completely backward compatible with 4.2.1 and 5.0.3 (BETA) Bug fixes and helpers to simplify many common scenarios For more information about this release see the following blog posts: F...DotNetNuke® Community Edition: 06.00.00 CTP: CTP 1 (Build 155) is firmly focused around our conversion to C#. As many people have noted, this is a significant change to the platform and affects all areas of the product. This is one of the driving factors in why we felt it was important to get this release into your hands as soon as possible. We have already done quite a bit of testing on this feature internally and have fixed a number of issues in this area. We also recognize that there are probably still some more bugs to be found ...Kooboo CMS: Kooboo 3.0 RC: Bug fixes Inline editing toolbar positioning for websites with complicate CSS. Inline editing is turned on by default now for the samplesite template. MongoDB version content query for multiple filters. . Add a new 404 page to guide users to login and create first website. Naming validation for page name and datarule name. Files in this download kooboo_CMS.zip: The Kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB ...SQL Monitor - tracking sql server activities: SQL Monitor 3.2: 1. introduce sql color syntax highlighting with http://www.codeproject.com/KB/edit/FastColoredTextBox_.aspxUmbraco CMS: Umbraco 4.7.0: Service release fixing 50+ issues! Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're available from: Introduction for webmasters: http://umbraco.tv/help-and-support/video-tutorials/getting-started Understand the Umbraco concepts: http://umbraco.tv/help-and-support...ProDinner - ASP.NET MVC EF4 Code First DDD jQuery Sample App: first release: ProDinner is an ASP.NET MVC sample application, it uses DDD, EF4 Code First for Data Access, jQuery and MvcProjectAwesome for Web UI, it has Multi-language User Interface Features: CRUD and search operations for entities Multi-Language User Interface upload and crop Images (make thumbnail) for meals pagination using "more results" button very rich and responsive UI (using Mvc Project Awesome) Multiple UI themes (using jQuery UI themes)BEPUphysics: BEPUphysics v0.15.1: Latest binary release. Version HistoryLiveChat Starter Kit: LCSK v1.1: This release contains couple of new features and bug fixes including: Features: Send chat transcript via email Operator can now invite visitor to chat (pro-active chat request) Bug Fixes: Operator management (Save and Delete) bug fixes Operator Console chat small fixesIronRuby: 1.1.3: IronRuby 1.1.3 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. The main purpose of this release is to sync with IronPython 2.7 release, i.e. to keep the Dynamic Language Runtime that both these languages build on top shareable. This release also fixes a few bugs: 5763 Use...SQL Server PowerShell Extensions: 2.3.2.1 Production: Release 2.3.2.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 13 modules with 163 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler, Oracle and MySQL and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.IronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...New Projects4711 Widget: Time Widget For 4711Baidu map api: Baidu map apiBookmooch.NET: A .NET wrapper for the Bookmooch.com API.Crash Cite - Electronic Crash Reporting Software: While we were in the electronic citation business - we wrote Indiana's eCWS - we decided to write our own crash reporting software. We exited from that biz because it's too politically charged. Here for you to use is an almost complete electronic crash reporting solution. Enjoy.Curso apb: Proyecto para gestionar un curso academico basado en apb. Ejemplo para aprendizaje personalEle: simple database changes log web applicationEmptor by Intrigue Deviation: An idea for collaboration and relations between customers and businesses.FixEd: FixEd is a text editor for working with text files that require enforcement of column widths and line lengths. Fixed-Width files...Typical from mainframe datasets or csv files. It provides a plugin parser system, so that files may be exported to and imported from any format.Free inventory: InventoryFurcadia Heimdall Tester: An application that helps Furcadia technicians test the integrity of the game server. It checks for availability of each heimdall, its connectivity to the rest of the system (horton/tribble) and how often it receives a user compared to the rest of them.GestOre: Software per gestire le ore di lavoro. Creazione di report mensili.Grauers Google Chart WebPart: SharePoint Foundation Google WebPart Chart. Create a custom list and connect Grauers Google Chart with the list. The Chart is interactive. Created by Ola GrauershOcr2Pdf.NET: hOcr2Pdf.NET is program/library to convert .hOcr files into a searchable pdf. It is currently being written and tested again the .hocr files products by the Tesseract ocr engine.Hyper-V Guest Console: This application provides a console for manage VMs use within a Hyper-V guest. With HVGC an Hyper-V guest can: - Start VMs - Shutdow VMs - Stop VMs - Monitoring VMs HVGC is develop in Visual Studio 2008 using VB.NET.JUpload.Net: JUpload.Net is an Asp Net control which encapsulates the popular Jupload java applet (http://jupload.sourceforge.net). myMvcBlog: my mvc blogNGI.Framework: NGI.FrameworkOnlineLicense: OnlineLicense is a PHP, mySQL and C# project. PHP and mySQL runing at Web Server side to store the online user information, and return the proper license for desktop applications which write by C#. SharePoint 2010 Managed Metadata Import Tool: Command-line SharePoint 2010 Managed Metadata import tool. Uses (almost) same CSV format as the Microsoft importer and supports static term GUIDs. Unlike the MS tool, this importer does not cause data corruption issues when taxonomy terms are used with Content Organizer rules.Sphere Layout Library: ItemsControl library targetting WPF, Silverlight for desktop and Silverlight for WP7, allowing to layout things on a 3d Sphere.TestProject for C#: Test project to test a Team Foundation Server.TfsUtils: Simple Project to store some TFS API utility code.This Is My New Project: FasdfTidy UI: Tidy UI is a "write less - do more" framework for .NET focusing on both client components and code for easy data access. The main goal of the framework is to enable ASP.NET developers to focus more on functionality and less on the technical aspects of the development process.TönnenKlapps: XNA game where you try to smash a 3D spinning barrel using the correct coloured buttons and the right timing.yihuaisha_Window: Glest research

  Read the article

• Acer aspire 5735z wireless not working after upgrade to 11.10

  - by Jon

  I cant get my wifi card to work at all after upgrading to 11.10 Oneiric. I'm not sure where to start to fix this. Ive tried using the additional drivers tool but this shows that no additional drivers are needed. Before my upgrade I had a drivers working for the Rt2860 chipset. Any help on this would be much appreciated.... thanks Jon jon@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:72:ec:76:d5 inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:72ff:feec:76d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7846 errors:0 dropped:0 overruns:0 frame:0 TX packets:7213 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8046624 (8.0 MB) TX bytes:1329442 (1.3 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34497 (34.4 KB) TX bytes:34497 (34.4 KB) Ive included by dmesg output below [ 0.428818] NET: Registered protocol family 2 [ 0.429003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.436614] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437409] TCP: Hash tables configured (established 524288 bind 65536) [ 0.437412] TCP reno registered [ 0.437431] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437482] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437678] NET: Registered protocol family 1 [ 0.437705] pci 0000:00:02.0: Boot video device [ 0.437892] PCI: CLS 64 bytes, default 64 [ 0.437916] Simple Boot Flag at 0x57 set to 0x1 [ 0.438294] audit: initializing netlink socket (disabled) [ 0.438309] type=2000 audit(1319243447.432:1): initialized [ 0.440763] Freeing initrd memory: 13416k freed [ 0.468362] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488192] VFS: Disk quotas dquot_6.5.2 [ 0.488254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488888] fuse init (API version 7.16) [ 0.488985] msgmni has been set to 5890 [ 0.489381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.489413] io scheduler noop registered [ 0.489415] io scheduler deadline registered [ 0.489460] io scheduler cfq registered (default) [ 0.489583] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489633] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.489699] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489741] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.489800] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489841] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.489904] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489944] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.490006] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.490047] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.490126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490196] intel_idle: MWAIT substates: 0x1110 [ 0.490198] intel_idle: does not run on family 6 model 15 [ 0.491240] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.493473] ACPI: AC Adapter [ADP1] (on-line) [ 0.493590] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.496771] ACPI: Lid Switch [LID0] [ 0.496818] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.496823] ACPI: Sleep Button [SLPB] [ 0.496865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.496869] ACPI: Power Button [PWRF] [ 0.496900] ACPI: acpi_idle registered with cpuidle [ 0.498719] Monitor-Mwait will be used to enter C-1 state [ 0.498753] Monitor-Mwait will be used to enter C-2 state [ 0.498761] Marking TSC unstable due to TSC halts in idle [ 0.517627] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517630] ACPI: Thermal Zone [TZS0] (67 C) [ 0.524796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.524799] ACPI: Thermal Zone [TZS1] (67 C) [ 0.524823] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.524852] ERST: Table is not found! [ 0.524948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.680991] ACPI: Battery Slot [BAT0] (battery present) [ 0.688567] Linux agpgart interface v0.103 [ 0.688672] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.688865] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.689786] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.689912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.691006] brd: module loaded [ 0.691510] loop: module loaded [ 0.691967] Fixed MDIO Bus: probed [ 0.691990] PPP generic driver version 2.4.2 [ 0.692065] tun: Universal TUN/TAP device driver, 1.6 [ 0.692067] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.692146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.692181] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.692206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.692210] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.692255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.692289] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.696181] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.696202] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.712014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712131] hub 1-0:1.0: USB hub found [ 0.712136] hub 1-0:1.0: 6 ports detected [ 0.712230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712243] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.712247] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.712287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712315] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.716201] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.716216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.732014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.732130] hub 2-0:1.0: USB hub found [ 0.732135] hub 2-0:1.0: 6 ports detected [ 0.732209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.732223] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.732262] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.732265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.732298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.732325] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.732441] hub 3-0:1.0: USB hub found [ 0.732445] hub 3-0:1.0: 2 ports detected [ 0.732508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.732514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.732518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.732553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.732577] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.732696] hub 4-0:1.0: USB hub found [ 0.732700] hub 4-0:1.0: 2 ports detected [ 0.732762] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.732768] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.732772] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.732805] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.732829] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.732942] hub 5-0:1.0: USB hub found [ 0.732946] hub 5-0:1.0: 2 ports detected [ 0.733007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.733014] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.733017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.733057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.733082] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.733202] hub 6-0:1.0: USB hub found [ 0.733206] hub 6-0:1.0: 2 ports detected [ 0.733265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.733273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.733276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.733313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.733351] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.733466] hub 7-0:1.0: USB hub found [ 0.733470] hub 7-0:1.0: 2 ports detected [ 0.733532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.733539] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.733542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.733578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.733610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.733730] hub 8-0:1.0: USB hub found [ 0.733736] hub 8-0:1.0: 2 ports detected [ 0.733843] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.751594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.751732] mousedev: PS/2 mouse device common for all mice [ 0.752670] rtc_cmos 00:08: RTC can wake from S4 [ 0.752770] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752796] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.752907] device-mapper: uevent: version 1.0.3 [ 0.752976] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 0.753028] cpuidle: using governor ladder [ 0.753093] cpuidle: using governor menu [ 0.753096] EFI Variables Facility v0.08 2004-May-17 [ 0.753361] TCP cubic registered [ 0.753482] NET: Registered protocol family 10 [ 0.753966] NET: Registered protocol family 17 [ 0.753992] Registering the dns_resolver key type [ 0.754113] PM: Hibernation image not present or could not be loaded. [ 0.754131] registered taskstats version 1 [ 0.771553] Magic number: 15:152:507 [ 0.771667] rtc_cmos 00:08: setting system clock to 2011-10-22 00:30:48 UTC (1319243448) [ 0.772238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.772240] EDD information not available. [ 0.774165] Freeing unused kernel memory: 984k freed [ 0.774504] Write protecting the kernel read-only data: 10240k [ 0.774755] Freeing unused kernel memory: 20k freed [ 0.775093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779727] Freeing unused kernel memory: 1400k freed [ 0.801946] udevd[84]: starting version 173 [ 0.880950] sky2: driver version 1.28 [ 0.881046] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.881096] sky2 0000:02:00.0: setting latency timer to 64 [ 0.881197] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 0.881871] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.896273] sky2 0000:02:00.0: eth0: addr 00:1d:72:ec:76:d5 [ 0.910630] ahci 0000:00:1f.2: version 3.0 [ 0.910647] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.910710] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 0.910775] ahci: SSS flag set, parallel bus scan disabled [ 0.910812] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.910816] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.910821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941773] scsi0 : ahci [ 0.941954] scsi1 : ahci [ 0.942038] scsi2 : ahci [ 0.942118] scsi3 : ahci [ 0.942196] scsi4 : ahci [ 0.942268] scsi5 : ahci [ 0.942332] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 46 [ 0.942336] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 46 [ 0.942339] ata3: DUMMY [ 0.942340] ata4: DUMMY [ 0.942344] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 46 [ 0.942347] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 46 [ 1.028061] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.181775] usbcore: registered new interface driver uas [ 1.260062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.261126] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.261129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.262360] ata1.00: configured for UDMA/133 [ 1.262518] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.262716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.262824] sd 0:0:0:0: [sda] Write Protect is off [ 1.262827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287277] sda: sda1 sda2 sda3 [ 1.287693] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.581188] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 [ 1.582663] ata2.00: configured for UDMA/100 [ 1.584162] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 [ 1.585821] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.585824] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.585953] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586038] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.632061] usb 6-1: new low speed USB device number 2 using uhci_hcd [ 1.908056] ata5: SATA link down (SStatus 0 SControl 300) [ 2.228065] ata6: SATA link down (SStatus 0 SControl 300) [ 2.228955] Initializing USB Mass Storage driver... [ 2.229052] usbcore: registered new interface driver usb-storage [ 2.229054] USB Mass Storage support registered. [ 2.235827] scsi6 : usb-storage 1-5:1.0 [ 2.235987] usbcore: registered new interface driver ums-realtek [ 2.244451] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 2.244598] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.244620] usbcore: registered new interface driver usbhid [ 2.244622] usbhid: USB HID core driver [ 3.091083] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.238275] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 3.348261] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.351897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 47.138012] udevd[334]: starting version 173 [ 47.177678] lp: driver loaded but no devices found [ 47.197084] wmi: Mapper loaded [ 47.197526] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.210227] acer_wmi: Brightness must be controlled by generic video driver [ 47.566578] Disabling lock debugging due to kernel taint [ 47.584050] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 47.620666] type=1400 audit(1319239895.347:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser" [ 47.620934] type=1400 audit(1319239895.347:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser" [ 47.621108] type=1400 audit(1319239895.347:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser" [ 47.633056] [drm] Initialized drm 1.1.0 20060810 [ 47.722594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 47.722602] i915 0000:00:02.0: setting latency timer to 64 [ 47.807152] ndiswrapper (check_nt_hdr:141): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B [ 47.807159] ndiswrapper (load_sys_files:206): couldn't prepare driver 'rt2860' [ 47.807930] ndiswrapper (load_wrap_driver:108): couldn't load driver rt2860; check system log for messages from 'loadndisdriver' [ 47.856250] usbcore: registered new interface driver ndiswrapper [ 47.861772] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 47.861781] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.861783] [drm] Driver supports precise vblank timestamp query. [ 47.861842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.980620] fixme: max PWM is zero. [ 48.286153] fbcon: inteldrmfb (fb0) is primary device [ 48.287033] Console: switching to colour frame buffer device 170x48 [ 48.287062] fb0: inteldrmfb frame buffer device [ 48.287064] drm: registered panic notifier [ 48.333883] acpi device:02: registered as cooling_device2 [ 48.334053] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 48.334128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 48.334203] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 48.334644] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334652] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334673] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 48.334737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.334772] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.356107] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 48.380946] hda_codec: ALC268: BIOS auto-probing. [ 48.390242] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 48.390365] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 48.490870] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr [ 48.917990] ppdev: user-space parallel port driver [ 48.950729] type=1400 audit(1319239896.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 48.951114] type=1400 audit(1319239896.675:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 48.977706] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 49.048871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 49.078713] sky2 0000:02:00.0: eth0: enabling interface [ 49.079462] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.762266] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 50.762702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.751478] type=1400 audit(1319239902.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser" [ 54.755907] type=1400 audit(1319239902.479:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1040 comm="apparmor_parser" [ 54.756237] type=1400 audit(1319239902.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser" [ 54.756417] type=1400 audit(1319239902.483:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser" [ 54.764825] type=1400 audit(1319239902.491:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1041 comm="apparmor_parser" [ 54.768365] type=1400 audit(1319239902.495:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1041 comm="apparmor_parser" [ 54.770601] type=1400 audit(1319239902.495:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1041 comm="apparmor_parser" [ 54.770729] type=1400 audit(1319239902.495:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1038 comm="apparmor_parser" [ 54.775181] type=1400 audit(1319239902.499:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1043 comm="apparmor_parser" [ 54.775533] type=1400 audit(1319239902.499:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1043 comm="apparmor_parser" [ 54.936691] init: failsafe main process (891) killed by TERM signal [ 54.944583] init: apport pre-start process (1096) terminated with status 1 [ 55.000373] init: apport post-stop process (1160) terminated with status 1 [ 55.005291] init: gdm main process (1159) killed by TERM signal [ 59.782579] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 60.992021] eth0: no IPv6 routers present [ 61.936072] device eth0 entered promiscuous mode [ 62.053949] Bluetooth: Core ver 2.16 [ 62.054005] NET: Registered protocol family 31 [ 62.054007] Bluetooth: HCI device and connection manager initialized [ 62.054010] Bluetooth: HCI socket layer initialized [ 62.054012] Bluetooth: L2CAP socket layer initialized [ 62.054993] Bluetooth: SCO socket layer initialized [ 62.058750] Bluetooth: RFCOMM TTY layer initialized [ 62.058758] Bluetooth: RFCOMM socket layer initialized [ 62.058760] Bluetooth: RFCOMM ver 1.11 [ 62.059428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.059432] Bluetooth: BNEP filters: protocol multicast [ 62.460389] init: plymouth-stop pre-start process (1662) terminated with status 1 '

  Read the article

• CodePlex Daily Summary for Wednesday, October 23, 2013

  CodePlex Daily Summary for Wednesday, October 23, 2013Popular ReleasesImapX 2: ImapX 2.0.0.10: The long awaited ImapX 2.0.0.10 release. The library has been rewritten from scratch, massive optimizations and refactoring done. Several new features introduced. Added support for Mono. Added support for Windows Phone 7.1 and 8.0. Added support for .Net 2.0, 3.0 Simplified connecting to server by reducing the number of parameters and adding automatic port selection. Changed authentication handling to be universal and allowing to build custom providers. Added advanced server featur...ABCat: ABCat v.2.0.1a: ?????????? ???????? ? ?????????? ?????? ???? ??? Win7. ????????? ?????? ????????? ?? ???????. ????? ?????, ???? ????? ???????? ????????? ?????????? ????????? "?? ??????? ????? ???????????? ?????????? ??????...", ?? ?????????? ??????? ? ?????????? ?????? Microsoft SQL Ce ?? ????????? ??????: http://www.microsoft.com/en-us/download/details.aspx?id=17876. ???????? ?????? x64 ??? x86 ? ??????????? ?? ?????? ???????????? ???????. ??? ??????? ????????? ?? ?????????? ?????? Entity Framework, ? ???? ...NB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.8 Rel3: vv2.3.8 Rel3 updates the version number in the ManagerMenuDefault.xml. Simply update the version setting in the Back Office to 02.03.08 if you have already installed Rel2. v2.3.8 Is now DNN6 and DNN7 compatible NOTE: NB_Store v2.3.8 is NOT compatible with DNN5. SOURCE CODE : https://github.com/leedavi/NB_Store (Source code has been moved to GitHub, due to issues with codeplex SVN and the inability to move easily to GIT on codeplex)patterns & practices: Data Access Guidance: Data Access Guidance 2013: This is the 2013 release of Data Access Guidance. The documentation for this RI is also available on MSDN: Data Access for Highly-Scalable Solutions: Using SQL, NoSQL, and Polyglot Persistence: http://msdn.microsoft.com/en-us/library/dn271399.aspxLINQ to Twitter: LINQ to Twitter v2.1.10: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.Media Companion: Media Companion MC3.584b: IMDB changes fixed. Fixed* mc_com.exe - Fixed to using new profile entries. * Movie - fixed rename movie and folder if use foldername selected. * Movie - Alt Edit Movie, trailer url check if changed and confirm valid. * Movie - Fixed IMDB poster scraping * Movie - Fixed outline and Plot scraping, including removal of Hyperlink's. * Movie Poster refactoring, attempts to catch gdi+ errors Revision HistoryTerrariViewer: TerrariViewer v7.2 [Terraria Inventory Editor]: Added "Check for Update" button Hopefully fixed Windows XP issue You can now backspace in Item stack fieldsVirtual Wifi Hotspot for Windows 7 & 8: Virtual Router Plus 2.6.0: Virtual Router Plus 2.6.0Fast YouTube Downloader: Fast YouTube Downloader 2.3.0: Fast YouTube DownloaderMagick.NET: Magick.NET 6.8.7.101: Magick.NET linked with ImageMagick 6.8.7.1. Breaking changes: - Renamed Matrix classes: MatrixColor = ColorMatrix and MatrixConvolve = ConvolveMatrix. - Renamed Depth method with Channels parameter to BitDepth and changed the other method into a property.VidCoder: 1.5.9 Beta: Added Rip DVD and Rip Blu-ray AutoPlay actions for Windows: now you can have VidCoder start up and scan a disc when you insert it. Go to Start -> AutoPlay to set it up. Added error message for Windows XP users rather than letting it crash. Removed "quality" preset from list for QSV as it currently doesn't offer much improvement. Changed installer to ignore version number when copying files over. Should reduce the chances of a bug from me forgetting to increment a version number. Fixed ...MSBuild Extension Pack: October 2013: Release Blog Post The MSBuild Extension Pack October 2013 release provides a collection of over 480 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...VG-Ripper & PG-Ripper: VG-Ripper 2.9.49: changes NEW: Added Support for "ImageTeam.org links NEW: Added Support for "ImgNext.com" links NEW: Added Support for "HostUrImage.com" links NEW: Added Support for "3XVintage.com" linksmyCollections: Version 2.8.7.0: New in this version : Added Public Rating Added Collection Number Added Order by Collection Number Improved XBMC integrations Play on music item will now launch default player. Settings are now saved in database. Tooltip now display sort information. Fix Issue with Stars on card view. Fix Bug with PDF Export. Fix Bug with technical information's. Fix HotMovies Provider. Improved Performance on Save. Bug FixingMoreTerra (Terraria World Viewer): MoreTerra 1.11.3.1: Release 1.11.3.1 ================ = New Features = ================ Added markers for Copper Cache, Silver Cache and the Enchanted Sword. ============= = Bug Fixes = ============= Use Official Colors now no longer tries to change the Draw Wires option instead. World reading was breaking for people with a stock 1.2 Terraria version. Changed world name reading so it does not crash the program if you load MoreTerra while Terraria is saving the world. =================== = Feature Removal = =...patterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3): Includes all changes in v1.3 beta 1 and v1.3 beta 2 Support for Windows 8.1 RTM and VS2013 RTM Xaml: New property: AutoLoadPluginTypes to help control which stock plugins are loaded by default (requires AutoLoadPlugins = true). Support for SystemMediaTransportControls on Windows 8.1 JS: Support for visual markers in the timeline. JS: Support for markers collection and markerreached event. JS: New ChaptersPlugin to automatically populate timeline with chapter tracks. JS: Audio an...Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falsePowerShell Community Extensions: 3.1 Production: PowerShell Community Extensions 3.1 Release NotesOct 17, 2013 This version of PSCX supports Windows PowerShell 3.0 and 4.0 See the ReleaseNotes.txt download above for more information.Python Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...New ProjectsAssignment 1 - WSCC2013: Assignment 1 - Web Scripting and Content Creation Assignment 1 * Initial web 2.0 site idea * Subversion * Web Application which accepts two numbers, add them aChappie: Chappie Team Main ProjectEnable Meeting Workspaces in SharePoint 2013: This projects provides some site templates to make meeting workspaces available in SharePoint 2013. Entity Framework 6 Contrib: Entity Framework Contrib is dedicated to contribute into Entity Framework 6 with new features that can not be included into EF master branch.ExifToFileName - Rename video audio files using exif tags o files property: The software allows you to rename automatically in the format: yyyy-mm-dd hh.mm.ss.ext all video or image files of a directory.Extensible Console Application Shell: Extensible Console Shell Application for creating plug in based functionality using MEF to easily incorporate new functionality into the shell console app.GameBook Engine: A game book engine.Generic Data Access Table: This is a simple class structure that simulates a database table through reflection for extremely quick data management, ideal for basic testing and simple appsGoogle Maps MVC 4: Google Maps MVC 4Grauers Hide Ribbon Items: A SharePoint Project to hide ribbon items in librariesHandy PRISM 4 Extensions: Collection of handy PRISM 4 extensions which comes handy on day to day usageHashTag .Net Developer's Library: Collection of helpful .Net routines covering serialization, logging, reflection, hosting, cryptography, extensions, validation, and more.How to display CallerID during VoIP Calls on Website: You can follow your calls easily using Ozeki Phone System XE JavaScript API. It is simple to receive notifications on the calls made through your own website.Imagenator: Small image converter app.jean1023changebranch: 11Kormic Cash Registers: An open source cash register application for windows. See the development plan or overview for more information.Line-Graph Drawing Component for WPF: This component allows you to draw lines between UI elements in a WPF application. Those lines and the UI elements are organized as graphs to configure thatOrchard Html Injection: Orchard module for injecting html code into layouts and zones.OS simulation: It's an project that is aimed to create a simulation of operation system for studying purposes.Producttransfer: the demostation of export Project_veilingsite: HTML5 ASP siteProjeto Integrador: Senac - ProjetoSapphireForum: Telerik Academy project. Forum-like application done using ASP.NET Web Forms.Team Hambergite - Conquistador: The project is simple game. You can take question and pick answer.TFS Storage Explorer: TFS Storage Explorer allows browsing the Team Foundation Server (non-version control) storage for TFS 2013 or above.Ticket Management based on TFS: TicketM is an extension to TFS 2012 to do support ticket management. It leverages Work Item Tracking Service of TFS 2012. vwpPMCase: vwpPMCasevwpPMCommunicate: vwpPMCommunicatevwpPMConfiguration: vwpPMConfigurationvwpPMCosts: vwpPMCostsvwpPMHR: vwpPMHRvwpPMPurchase: vwpPMPurchasevwpPMQuality: vwpPMQualityvwpPMRisk: vwpPMRiskvwpPMScope: vwpPMScopevwpPMThesis: vwpPMThesisvwpPmTime: vwpPmTimevwpPMWhole: vwpPMWholeWinner - Scommessa vincente: Winner permette di scommettere diverse quote per gli incontri dei maggiori eventi sportivi, calcolare la vincita partendo da un importo inserito, e salvarla.ymproject: cocos & tools & editor & applications

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >