Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 248/1106 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

• Hostapd - WLAN as AP

  - by BBK

  I'm trying to start hostapd but without success. I'm using Headless Ubuntu 11.10 oneiric 3.0.0-16-server x86_64. WLAN driver is rt2800usb and my wireless nic card TP-Link TL-WN727N supports AP mode as shows below: us0# ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:27:19:be:cd:b6 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) us0# lsusb Bus 003 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter us0# lshw -C network *-network:3 description: Wireless interface physical id: 4 bus info: usb@3:2 logical name: wlan0 serial: 00:27:19:be:cd:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.0.0-16-server firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn us0# hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf Could not read interface wlan0 # The int flags: No such device nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0xd3e4a0 user_data=0xd3ecc0 handler=0x433880 ELOOP: remaining socket: sock=6 eloop_data=0xd411f0 user_data=(nil) handler=0x43cc10 us0# cat /etc/hostapd/hostapd.conf ssid=Home interface=wlan0 # The interface name of the card #driver=rt2800usb driver=nl80211 macaddr_acl=0 ieee80211n=1 channel=1 hw_mode=g auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=88888888 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP us0# iw list Wiphy phy0 Band 1: Capabilities: 0x172 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 1-stream Max AMSDU length: 7935 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-7, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning, no IBSS) * 2472 MHz [13] (20.0 dBm) (passive scanning, no IBSS) * 2484 MHz [14] (20.0 dBm) (passive scanning, no IBSS) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (68) * Unknown command (55) * Unknown command (57) * Unknown command (59) * Unknown command (67) * set_wiphy_netns * Unknown command (65) * Unknown command (66) * connect * disconnect The question is: Why the hostapd not starting?

  Read the article

• Using proxy on my Ubuntu 12.04 and proxy exception problem

  - by user1343713

  im new in linux systems. I recently installed Ubuntu 12.04 LTS and it works fine with me, but i have a problem. I live in the university dorms and in order to use internet i have to put proxy settings which require authentication, i had a problem with downloading from the store but i read the solution you wrote here still sometimes it works sometimes :( i dont know why. But the big problem is if i want to open any link from inside the university i have to disable the proxy, on Windows there were an exception for using the proxy you can easily do it. is there any possible way of doing that in Ubuntu 12.04 Thank you for being helpful

  Read the article

• How can I prevent an app from leaving full screen mode when I move the cursor to another display?

  - by dan

  When I have dual displays set up, or when I am using Synergy to use one keyboard and mouse across two computers/screens, I can't seem to retain F11 full screen mode for the top application when I mouse out of that screen. This applies to both the application and also to any Flash video that may be playing in full screen mode. Is there any way to retain full screen mode and mouse out of the display?

  Read the article

• VMWare Fusion Folder Sharing Not Working with Server

  - by Dave Long

  I have a Ubuntu Server running in VMWare Fusion 3.1.2 on my MacBook Pro for Java development and all my projects sit on my Mac in ~/Workspace/ColdFusion. I had ColdFusion/ shared with my VM through the VMWare tools, and it was working perfectly up until friday when the folder sharing just stopped. No updates on either mac or linux besides an iTunes update. I tried uninstalling the VMWare tools and reinstalling them but I get an error at the end of the install. It appears that when I reinstall the tools there are files left over from the old installation. Is there a way to force the unsinstall script to completely uninstall and remove all files for the VMWare-Tools? I know the shared folder used to mount at /mnt/hgfs/ColdFusion.

  Read the article

• Suggestion for an application to do our company car fleet management

  - by Pitto

  (As suggested I've tried asking on webapps with no luck... So I try on askubuntu: I'll be luckier :) ) Hello, everybody! Our company could be a little more open source and a little "ubuntier" if I can find an easy and user friendly web application (we already have our LAMP server based on Ubuntu 10.04 LTS) to handle company's car fleet expenses and repairs planning. Any hints? :) Thanks for any kind of help.

  Read the article

• ~/.bashrc return can only 'return' from a function or sourced script

  - by Timothy

  I am trying to setup a OpenStack box to have a look at OpenStack Object Storage (Swift). Looking through the web I found this link; http://swift.openstack.org/development_saio.html#loopback-section I followed the instructions line by line but stuck on step 7 in the "Getting the code and setting up test environment" section. When I execute ~/.bashrc I get; line 6: return: can only 'return' from a function or sourced script. Below is the Line 6 extract from ~/.bashrc. My first reaction is to comment this line out, but I dont know what it does. Can anyone help? #If not running interactively, dont't do anything [ -z "$PS1" ] && return I'm running Ubuntu 12.04 as a VM on Hyper-v if knowing that is useful.

  Read the article

• unity top menu keyboard shortcuts for desktop alone, no programs running

  - by user108754

  Alt+F1 accesses the launcher menu, with arrow keys to navigate the list (side menu). Alt+F10 accesses the top bar in an open application (or Alt+an underlined menu item letter), which allows access to the global ubuntu settings in the top right (battery, wifi/networking, audio, time/calendar, user, power). Alt+F10, when no application is open and you're just staring at the desktop, accesses those ubuntu settings immediately. But the top menu bar does list, in the top left, menu commands for the desktop per se (create new folder, go home, help, start server, etc). These can be accessed only by mouse hovering and click. No way to get to them only by keyboard (arrow keys just cycle through the settings, don't jump over to the left side of the top bar). Is there a keyboard shortcut way to access the desktop menu bar for manipulating icons on your desktop and other general things? Or is this a work in progress for unity? If you use the context menu key (or some equivalent you've set to generate that signal) along with other shortcuts for working on the desktop, you can cover most of the functionality of the top menu bar. However, I don't want to memorize those keys to become proficient. I just want a way to open and browse through those menu items (and they aren't ALL available through hotkeys anyway).

  Read the article

• PXE booting on old computer

  - by kosciak

  So my computer is not working - the disk is totally cleared, I've deleted GRUB and PLOP which I used to install new system, because CD-Rom is broken and BIOS is old (whole computer is old, it's Sony Vaio PCG-GR250) so it won't allow me to do it via USB and I got no floppy drive :) the only way is to PXE boot PLOP and install Linux from USB after PLOP has been opened. (I'm not a specialist but that's how I see it) I'm using Mac OS X 10.9 and I followed number of tutorials how to set up TFTP and DHCP server and I got PLOP here, but when I boot up with PXE it says that it found DHCP but TFTP timed out. Any help or alternative way of rescuing old laptop? Thanks in advance!

  Read the article

• Cannot install ubuntu on Asus UX51VZ

  - by Andrey Frunt

  I removed Win8, changed partition table from GPT to MBR and installed Win7. The problem is that I don't see the grub after I installed ubuntu and only win7 boots. Any ideas? I tried to reinstall all of listed above about 5 times but with no success :( I tried both 13.04 and 13.10 UPD: I also tried Boot-Repair and it installed the grub2 for me but unfortunately only with options to run ubuntu, so I repaired bootrecord using windows tools to have an ability to run to windows. Anyway I still cannot configure the dual boot. Please help :)

  Read the article

• How can I fix the "TERM environment variable not set" warning in eclipse

  - by Robert

  I'm running ubuntu 12.04 LTS and working with eclipse (juno) on a c++ project. I keep getting "TERM environment variable not set" in the console while trying to run the program. I realize this means the variable needs to get set. My question is what should it be set to and how do I set it? I've read that it should be 'xterm' in a few places. So I added export TERM=xterm in my .profile and while eclipse stopped giving me the warning, instead it would output unreadable garbage everynow and then (not a side effect of the program). It did display the program output but intermixed were weird characters. This leads me to believe it's not 'xterm' I should be setting TERM to. Or I'm setting it in an incorrect way. Any help is appreciated. Sample output: **TERM environment variable not set.** Please make a selection ----------------------- 1. Create a budget 2. Edit a budget 3. Display a budget 4. Save a budget 5. Load a budget 6. Exit What is your selection: 1 **TERM environment variable not set.** Enter the name of your budget: etc The program continues to execute as expected but the message is highly annoying As someone has commented, I do use system("clear") which is likely the source of the warning? Either way, is this likely just an eclipse issue or something I can fix in ubuntu/linux

  Read the article

• How to install Pear Linux's shell in Ubuntu?

  - by Emerson Hsieh

  For people who doesn't know what Pear Linux is: Pear Linux is a French Ubuntu-based desktop Linux distribution. Some of its features include ease-of-use, custom user interface with a Mac OS X-style dockbar, and out-of-the-box support for many popular multimedia codecs. Excerpt from Distrowatch. When this Linux Distribution came out, I immediately went to the website and found out that Pear Linux is actually Mac OSX with a pear. I was going to download it and install Pear Linux as a triple-boot on my computer (Windows and Ubuntu installed). Then I remembered that Pear Linux is Ubuntu based. So I thought of a better Idea of installing only the Comice OS Shell in Ubuntu(the Desktop environment of Pear Linux), so that I can select that in the login screen. Is that possible? EDIt: Found this.

  Read the article

• Fonts look bad in Microsoft Office using Wine

  - by amfcosta

  Office fonts in wine look very different from what they look in Windows or LibreOffice. As can be seen from the attached screenshots, they look blurry in some sizes and aliased in other sizes. You can see the differences not only in the document text but also in the ribbon menu. It happens with a lot of fonts. I'm testing it with Office 2010 now, but it also happens in Office 2007. Things I've tried: Changing fontsmooth settings with winetricks - made no difference. Copying fonts from a Windows system - made no difference. Using Ubuntu's fonts (by removing the Windows/Fonts from the wineprefix) - removed the blurriness in some fonts but increased aliasing. The three screenshots correspond to different "configurations": office_wine.png - Office Word in Wine using Wine's original fonts; office_nowinefonts.png - Office Word in Wine using Ubuntu's fonts; office_windows.png - Office Word in Windows. PS: please make sure to see the screenshots without scaling them to notice the problem. EDIT: A screenshot of how Calibri behaves in Wine here.

  Read the article

• Ubuntu 12.04 boot hangs with a black screen before grub menu after upgrade (gma500_gfx driver)

  - by Eric van der Vlist

  I am using Ubuntu on a fit-pc2 specifications and after upgrading from 10.04 to 12.04 I get a black screen at boot time (before displaying the grub menu) and the computer hangs with no disk activity. I have managed to boot Ubuntu 12.04 on a live USB key but had to add the following boot options to do so: console=tty1 or console=text acpi=off noapic nomodeset Using boot-repair, I have tried to add these options to /etc/default/grub (see this pastie log for instance) but I haven't been able to fix the black screen issue. I have tried many other things such as the workarounds mentioned on the web for PSB-GFX_drivers without any success and also to uncomment GRUB_TERMINAL=console with the result of getting a No video mode activated error. During these tests, I have managed to break /boot/grub/grub.cfg and could then hit grub in command line. This gave me the chance to check that I can boot without problem if I type: grub> set root=(hd0,1) grub> linux /vmlinuz root=/dev/sda1 ro acpi=off noapic nomodeset console=tty1 grub> initrd /initrd.img grub> boot How can I tell grub to use these options?

  Read the article

• How to detect webcam?

  - by Vishwas

  I installed Cheese but it is not yet possible for me to work with my webcam. After running lsusb I get this: Bus 007 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 044e:3012 Alps Electric Co., Ltd Bus 003 Device 004: ID 044e:3013 Alps Electric Co., Ltd Bus 003 Device 003: ID 044e:3010 Alps Electric Co., Ltd Bluetooth Adapter Bus 003 Device 002: ID 044e:3011 Alps Electric Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Tell me what should I do now?

  Read the article

• How do I get media players to play ripped dvd files using Handbrake?

  - by LibraryGeekAdam

  I want to rip my dvd collection to put on a server for my tv. I started this with trying 4 dvds using Handbrake. The first 3 ripped perfectly fine according to the directions I used from LifeHacker (http://lifehacker.com/5773000/how-to-rip-dvds-with-handbrake). The 4th dvd took about 2 secs to rip and then stopped saying it was complete. It was not. Now with the 3 files I have I tried to open and play with VLC and Miro. Neither one would play the file. It says its open but there is no sound or video and it doesn't actually show the movie playing in the progress bar. I ran it from the terminal and this is the error message I get. [0xb04c2f38] mp4 demux error: MP4 plugin discarded (no moov,foov,moof box) [mov,mp4,m4a,3gp,3g2,mj2 @ 0xa032980] moov atom not found [mov,mp4,m4a,3gp,3g2,mj2 @ 0xb0efd500] moov atom not found [0xb04c2f38] avformat demux error: Could not open ????e/boris/Videos/Movies/Taras Bulba 1962.m4v: Unknown error 1094995529 I have also changed a file name to end .mp4 instead of .m4v which is how I originally ripped them.

  Read the article

• How to "apt-get -f install" without deleting software?

  - by Jeggy

  I know Guitar pro doesn't support 64 bit, but i did get it to work with this command jeggy@jeggy-XPS:~$ sudo dpkg --force-architecture -i GuitarPro6-rev9063.deb [sudo] password for jeggy: Selecting previously unselected package guitarpro6:i386. (Reading database ... 285729 files and directories currently installed.) Unpacking guitarpro6:i386 (from GuitarPro6-rev9063.deb) ... dpkg: dependency problems prevent configuration of guitarpro6:i386: guitarpro6:i386 depends on gksu. dpkg: error processing guitarpro6:i386 (--install): dependency problems - leaving unconfigured Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Errors were encountered while processing: guitarpro6:i386 And even after i get that error the program perfectly works fine and updating and adding PPA's to the system works great, but when I'm trying to install some other software i get this error: jeggy@jeggy-XPS:~$ sudo apt-get install elinks Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: elinks : Depends: libfsplib0 (>= 0.9) but it is not going to be installed Depends: liblua50 (>= 5.0.3) but it is not going to be installed Depends: liblualib50 (>= 5.0.3) but it is not going to be installed Depends: libtre5 but it is not going to be installed Depends: elinks-data (= 0.12~pre5-7ubuntu1) but it is not going to be installed guitarpro6:i386 : Depends: gksu:i386 but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And whenever i write "apt-get -f install" i get this jeggy@jeggy-XPS:~$ sudo apt-get -f install [sudo] password for jeggy: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: dconf-gsettings-backend:i386 python-levenshtein python-indicate libav-tools libstartup-notification0:i386 libxmuu1:i386 libavfilter-extra-2 libbabl-0.0-0 libgegl-0.0-0 libgconf2-4:i386 python-vobject libgtk-3-0:i386 libpam-cap:i386 python-utidylib libdconf0:i386 python-iniparse python-xmpp libpam-gnome-keyring:i386 libxcb-util0:i386 python-farstream Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: guitarpro6:i386 0 upgraded, 0 newly installed, 1 to remove and 7 not upgraded. 1 not fully installed or removed. After this operation, 84,0 MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 286979 files and directories currently installed.) Removing guitarpro6:i386 ... dpkg: warning: while removing guitarpro6:i386, directory '/opt/GuitarPro6/updater' not empty so not removed. dpkg: warning: while removing guitarpro6:i386, directory '/opt/GuitarPro6/Data/Soundbanks' not empty so not removed. Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... And now Guitar Pro is deleted. How can i install Guitar Pro and still be able to install other software afterwards?

  Read the article

• How to create a Remote Desktop Server on Ubuntu Server per user

  - by Ali Akdurak

  I want to create an old style server - thinclient/terminal kind of work with ubuntu server 12.04. I was trying to use x11vnc to serve remote desktops to users but from what I have understood [after couple of hours] it directly serves the x display of only one user. I want to have something like windows 2008 login where every user connects and logins to his own desktop and has his own working environment. Is it possible with ubuntu server ? Thank you

  Read the article

• gcc no longer works after up grade to latest Ubuntu

  - by Hugh S. Myers

  As an example: hsmyers@ubuntu:~/c_dev$ cat hello.c #include <stdio.h> int main(int argc,char **argv) { printf("Hello World!\n"); return 0; } hsmyers@ubuntu:~/c_dev$ gcc -c -o hello.o hello.c In file included from /usr/include/stdio.h:28:0, from hello.c:1: /usr/include/features.h:323:26: fatal error: bits/predefs.h: No such file or directory compilation terminated. At a guess somewhere along the way after trying to fix the error message: /usr/bin/ld: cannot find crt1.o: No such file or directory I've munged things up completely. Could anyone please advise? --hsm

  Read the article

• Using USB to Ethernet with Linux Ubuntu 12.04

  - by Sriram

  Being a newbie, Please excuse if the technical Jargon used is not an universally accepted one :) I have a particular device (say device A) whose USB2.0 driver is available from Linux community. Linux UBUNTU12.04 based PC is able to detect that device via the available driver. My requirement is to ensure that PC can exchange the command as well as data with the device A over TCP/IP packets (In other words, instead of just a USB Based driver, there should be a TCP/IP wrapper over the device USB driver and still does the same job as the USB driver was doing before) Bought an USB (Female) to RJ-45 adapter,connected Device A (male) USB to the USB Female end of the adapter and the Ethernet end connected to the router. PC also is connected to the same router so that both Device A and the PC have the IP address in the same subnet range. So the packets produced by the device A can be routed to the PC via some binding( not sure how I can achieve this, but conceptual idea) Here are the issues I can see as of now 1) USB to RJ-45 is just a hardware signal conversion and not a NIC in itself and hence no MAC/IP ADDRESS assigned. Can we bind a virtual NIC created in PC with this connector? 2) Any available USB TO IP command as well as data translation wrappers available? e.g. command for the device A on Ethernet converted to command for the device A on USB which is then acted upon the device as a command from the USB driver There is some missing link in my understanding and hence it would be of great help if you can bounce off some ideas on how I can take this forward so that Device A and PC exchange data over IP. Thanks and Regards, Sriram

  Read the article

• How do you make Bastille work and secure Ubuntu 12.04? It doesnt work for me `sudo bastille -x`

  - by BobMil

  I was able to install bastille from the normal repositories and then run the GUI. After going through the options and clicking OK to apply, it showed these errors. Do you know why Bastille wont work on Ubuntu 12.04? NOTE: Executing PSAD Specific Configuration NOTE: Executing File Permissions Specific Configuration NOTE: Executing Account Security Specific Configuration NOTE: Executing Boot Security Specific Configuration ERROR: Unable to open /etc/inittab as the swap file /etc/inittab.bastille already exists. Rename the swap file to allow Bastille to make desired file modifications. ERROR: open /etc/inittab.bastille failed... ERROR: open /etc/inittab failed. ERROR: Couldn't insert line to /etc/inittab, since open failed.NOTE: Executing Inetd Specific Configuration

  Read the article

• Why is ssh-add adding duplicate identity keys?

  - by skyblue

  I have created a private/public SSH key pair using "ssh-keygen". I use this to authenticate to remote servers. However, I find that when I log in, "ssh-add -l" already lists my identity key even though I have not added it! If I use the command "ssh-add" it prompts me for my passphrase and loads my identity key. If I then list my keys with "ssh-add -l", it now shows two identity keys! These are obviously the same as both have the same fingerprint, but their descriptions are different (the automatically is "user@host (RSA)" and the one added using ssh-add is "/home/user/.ssh/id_rsa (RSA)"). So why does my identity key appear to be loaded without any action on my part, and why does ssh-add add the same key again? Obviously something must be doing this automatically, but what is it, and how can I stop it?

  Read the article

• Sound driver for motherboard gigabyte ga-g1975x-c (Creative Sound Blaster Live 24-bit) (alsa, ca0106)

  - by Mikl

  My motherboard is gigabyte ga-g1975x-c with integrated audio "Creative Sound Blaster Live 24-bit". I have installed Ubuntu 10.10, and there was no sound at all. Alsa drivers was already installed. Finally after long searching, i have found how to make my sound work. /etc/modprobe.d/alsa-base.conf: options snd-ca0106 subsystem=0x10121102 //i have added this line and restart After restarting my speakers and microfon works fine. Maybe somebody knows different/better subsystem code for my sound card???

  Read the article

• How do I clear xmodmap settings?

  - by Wayne Werner

  Exactly what the title asks. How do I clear xmodmap settings? I have an IBM model M, and somehow xkeycaps got it into its head that my "End" key was not any key at all. xev reports keypresses when I use it, so I know the event is being generated by the keyboard. Also, xkeycaps thinks that my arrow keys are all wonky, and apparently the scrollbar is broken so it only scrolls down - so I can't scroll up to find an IBM keyboard that just maybe is close to my map so I can fix my keys. So I'm trying to reset my keyboard to the default settings, but the xmodmap manpage is woefully devoid of "reset all" or "clear all" or anything of that nature (that I was able to find). Help would be greatly appreciated!

  Read the article

• Can't add NetworkManager applet to gnome panel

  - by Nate

  I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true I restarted NetworkManager and tried rebooting, too. At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

  Read the article

• /etc/postfix/transport missing

  - by Thufir

  I'm following the mailman guide but cannot locate /etc/postfix/: root@dur:~# ll /etc/postfix/ total 124 drwxr-xr-x 3 root root 4096 Aug 27 20:04 ./ drwxr-xr-x 170 root root 12288 Aug 27 19:58 ../ -rw-r--r-- 1 root root 373 Aug 14 01:44 dynamicmaps.cf -rw-r--r-- 1 root root 2252 Aug 27 20:04 main.cf -rw-r--r-- 1 root root 1280 Aug 16 23:59 main.cf.1.orig -rw-r--r-- 1 root root 3298 Aug 25 16:59 main.cf.2.mysql -rw-r--r-- 1 root root 1323 Aug 26 00:38 main.cf.3.dovecot -rw-r--r-- 1 root root 2092 Aug 27 20:01 main.cf.4 -rw-r--r-- 1 root root 5563 Aug 14 01:43 master.cf -rw-r--r-- 1 root root 150 Aug 17 00:21 mysql_alias.cf -rw-r--r-- 1 root root 150 Aug 17 00:22 mysql_domains.cf -rw-r--r-- 1 root root 150 Aug 17 00:21 mysql_mailbox.cf -rw-r--r-- 1 root root 19707 Apr 13 13:33 postfix-files -rwxr-xr-x 1 root root 8729 Oct 6 2011 postfix-script* -rwxr-xr-x 1 root root 26498 Apr 13 13:33 post-install* drwxr-xr-x 2 root root 4096 Apr 13 13:33 sasl/ root@dur:~#

  Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >