Search Results

Search found 10812 results on 433 pages for 'boot partition'.

Page 248/433 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

  • How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

    - by igoryonya
    I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

    Read the article

  • How do I install Intel ethernet drivers?

    - by Pat
    I just bought a Lenovo T420, I booted the live CD and couldn't connect to my wireless router so I figured I needed the drivers for it. I have the last version of Ubuntu(12.04). It's a Intel® 82579 Gigabit Ethernet Controller So I went on intel's website and downloaded the Drivers for Linux and compiled them with make install. Here's the tutorial I followed: Linux Driver Install I have a few question though, What are these doing : modprobe e1000e ifconfig eth0 up dhclient eth0 ping intel.com As far as what I've read, modprobe seems to add the driver to the list of drivers for the kernel, but is that operation only good for one session? The two other lines, I don't understand either what they are doing. What does he mean at the end when he mentions : Note: Whenever the kernel version is upgraded you will need rebuild this driver. And are these steps permanent? Or do I have to add them to some boot.conf file for everytime I boot. Anyways, the steps worked for me and I have established a connection with my router, I just need to know if I need to do additional steps to keep the driver permanently etc.

    Read the article

  • Weird Screen while booting to install, while installing and after the install...and then the "panic occured" error

    - by Klyn
    I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

    Read the article

  • installing linux froom usb pen drive

    - by zulu
    I'm new to Linux. I'm using Ubuntu 11.04. Now i want to install Ubuntu 12.04 . I got an ISO image of Ubuntu 12.04 Desktop. I put this image in to a pen drive which is formated,set the boot option boot from usb but nothing happened . I searched this over the net and on Ubuntu website but nobody has given the complete steps . someone say u can install from the Ubuntu also ,someone says u can do a fresh installation from usb pen drive u need to make you pen drive bootable etc. etc. . My problem is that i don't know the exact steps how ton install Ubuntu from usb pen drive? All I want to do is to completely remove my Ubuntu 11.04 and install Ubuntu 12.04 from usb pen-drive. Can any body tell me how to make a pen drive bootable ? How to install Ubuntu 12.04 from pen-drive? Please give me a step by step procedure. please explain me how to do it step by step . Thanx in advance

    Read the article

  • Crackling sound from microphone recently, in 13.04

    - by Patrig Droumaguet
    I use 13.04 since the release and I use Skype which was working well. But recently I've had remarks saying my voice was "crackling", even if the voice from my interlocutor was perfect. Making a test with Audacity and Cheese, I've seen that every recorded sound (with the front microphone of my laptop or a jack microphone) was crackling. It's not really like saturating, the sound has a lot of annoying pops. I've tried to check the settings, they were still on PulseAudio. I've even tried the extreme solution : re-installing Ubuntu (because initially it was working)… with the same problem. If I boot on Windows (dual-boot) I have no problem (so it's not physical). If anyone could help :) My laptop is a HP dv6-6165sf. The sound card is a "IDT 92HD81B1X5" (with BeatsAudio). Thanks a lot ! New tests - july 6th Hi again, I've tried editing /etc/pulse/default.pa with these three settings : load-module module-udev-detect use_ucm=0 tsched=0 load-module module-udev-detect tsched=0 load-module module-udev-detect use_ucm=0 The three of them don't change anything, except the last one (which was by default) which makes Audacity record without any crackling sound. But in Skype, Cheese and Kazam, the sound is crackling… I've installed again Ubuntu 13.04 (from scratch, deleting everything from /home), and I've updated it. The microphone is still cracking. Thanks for your help !

    Read the article

  • Cannot get script to run at startup (tried all the simple answers)

    - by Carey Head
    I have Ubuntu Desktop 12.04 LTS running great on an older Acer desktop. I want to use this machine as an in-home server for hosting Minecraft. The command to start the Minecraft server is java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui and that works great when I cd into the correct directory and execute the above. I created a script to do this: #!/bin/bash cd /home/myuser/minecraft-server1 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & cd /home/myuser/minecraft-server2 java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui & exit 0 I made this .sh file executable, and it too runs great when I start it manually from the terminal. The problem I'm having is getting these to execute at startup. I have my user account on this machine to auto login. I have tried the following: Adding the following to "Startup Applications" : sh /home/myuser/myscript.sh (Nothing happens on reboot) Adding the same to /etc/rc.local (Nothing happens on reboot). I even tested this one by running /etc/rc.local from the terminal, and it executed great. Just not at boot/auto login Added the lines from the script directly to rc.local (Nothing happens on reboot). I can't help but think that there's something I'm missing. The script executes great when run manually, but will not run at boot/auto login. Many thanks in advance.

    Read the article

  • nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

    - by rlemon
    I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

    Read the article

  • Re-installing Ubuntu without losing files, how to?

    - by moraleida
    Sometime back i bought a second PC to serve as my backup machine, but i've never managed to have it as i would like. Now i want to start over, but i've messed so much with it's disks that i'm kinda afraid to lose something on the way, thus this question. Right now, I have a 1Tb disk partitioned like this (as per GParted): /dev/sda1 (ext4) 346.12Gb - Is almost full, has an old install of Ubuntu 11.10. It no longer boots, ever since i installed Windows7 on /sda3. Everything that matters to me is tucked into /var/www/ all the rest can just go. /dev/sda2 (ext4) 196.45Gb - has an old install of 12.04 and nothing important, it's pretty much empty and also doesn't boot. /dev/sda3 (ntfs) 377.97Gb - is my boot partition with Windows 7, some important files and I'd like to keep it untouched. /dev/sda4 (extended) 10.97Gb - was created when i first installed Ubuntu, i think. In my ideal world, I'd like to safely reinstall Ubuntu from the 12.04 liveUSB and merge sda1 and sda2 without losing any files. Is that possible? How?

    Read the article

  • Wifi interface changes name seemingly at random

    - by ray_voelker
    I'm currently having some issues getting a wireless interface to work continuously under an install of Ubuntu 12.04.1 LTS. Some of the issues I'm experiencing include Connection will drop out after some time after it has initially worked. Interface will be a different name after a reboot. For example, wlan0 will become wlan4 when using the ifconfig -a command. Ubuntu will take a long time to boot, looking for network adapters. The purpose of this build is to function as a web kiosk in a library. The computer is supposed to boot up into a web browser, and allow for browsing of the catalog. For some reason this interface does not appear to be working as it should. Are there any explanations for some of these problems I'm having, and perhaps some solutions? The wireless card appears as this after doing an lspci ... Ralink corp. RT2561/RT61 802.11g PCI In the /etc/network/interfaces file I have the following configuration for the interface. auto wlan0 iface wlan0 inet dhcp wireless-essid UDwireless wireless-mode Managed Thanks in advance for help on this.

    Read the article

  • noexec option enabled in fstab is not getting applicable for limited user. Is it a bug?

    - by user170918
    noexec option enabled in fstab is not getting applicable for limited user. Is it a bug? cat /etc/fstab # / was on /dev/sda2 during installation UUID=fd7e2645-3cc4-4c6c-8b1b-016711c2fd07 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=f3e58f86-8999-4678-a5ec-0a4b621c6e37 /boot ext4 defaults 0 2 # /home was on /dev/sda9 during installation UUID=bcbc1c4d-46a9-4b2a-bb0a-6fe1bdeaed22 /home ext4 defaults,nodev,nosuid 0 2 # /tmp was on /dev/sda5 during installation UUID=8538eecc-bd16-40fe-ad66-7d7b9287839e /tmp ext4 defaults,noexec,nosuid,nodev 0 2 # /var was on /dev/sda6 during installation UUID=292696cf-fc15-40ab-9cd8-cee9bff7e165 /var ext4 defaults,nosuid,nodev 0 2 # /var/log was on /dev/sda7 during installation UUID=fab1f85b-ae09-4ce0-b169-c01205eb8f9c /var/log ext4 defaults,noexec,nosuid,nodev 0 2 # /var/log/audit was on /dev/sda8 during installation UUID=602f5003-4ac0-49e9-99d3-b29378ce9430 /var/log/audit ext4 defaults,noexec,nosuid,nodev 0 2 # swap was on /dev/sda3 during installation UUID=a538d35b-b2e9-47f2-b72d-5dbbcf0afca0 none swap sw 0 0 /dev/sdb1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdc1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 sudo users are not able to paste executable files in /bin into the file system which have the noexec option set. But limited users are able to paste the same files into the file system which have noexec option set. Why is it so?

    Read the article

  • Is there a PROPRIETARY driver (NVIDIA or ATI) that actually works with 12.10?

    - by DS13
    NOTE: I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. THE MAIN DIFFERENCE SEEMS TO BE: I always get a black screen with a blinking cursor, while others seem to get through the boot-up and see distorted graphics or just their wallpaper. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics (even just menus) are very slow, choppy, and distorted. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: -Does anyone know of a PROPRIETARY driver that will actually work on 12.10 with a NVIDIA or ATI card? -Should I just buy a newer graphics card to put in as a replacement? MORE INFO: This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent'ish Core2Duo Intel processor (2.13Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card (NVIDIA Geforce 7350 LE) is holding me back. TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -tried installing 12.04 *same results -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail -UPDATE- Re-tried everything above with a new NVIDIA Geforce 210...same results for everything. -UPDATE #2- Re-tried everything above with a new AMD Radeon HD 6450...installed the proprietary driver from Ubuntu's "Software Sources" menu...EVERYTHING NOW WORKS. See "answer" below for summary.

    Read the article

  • Ubuntu automatic logout whenever I execute exe files

    - by KeepTrying
    I have a problem. Here's the thing. There were 4 partitions in my hard drive: One for ubuntu root folder One for ubuntu home folder One for general stuffs like music, movies... And the last one for SWAP To install Windows 7, I resized partitions and moving the order of partitions by using GParted. I moved all of the ext formatted partitions to the left, so that means the spare space would be at the right. And I formatted that spare space in NTFS and install windows 7. After successfully installing windows 7, I used LiveUSB to fix grub. I installed Boot Repair and, with just one click, now I can dual boot ubuntu and windows 7. But, the point, because of changing the order of partitions, especially the partition consisting of home folder, I couldn't log in the ubuntu. I used recovery mode and changed file /etc/passwd. Everything almost got back to normal except one thing. The windows apps that I installed via wine don't work anymore. I run them via accessing menu Applications/Wine/Programs but nothing loads. One more thing, when I double click on exe files to run them, ubuntu suddenly log outs. Thank you for reading my post, it's quite long and my English is fairly poor. I'd appreciate for anyone who reads it.

    Read the article

  • One of my VMs went boom using Virtual Box and how it got fixed

    - by Enrique Lima
    I am running an HP Envy 15, 16GB and 500GB (7200 RPM) Hard drive. Had a VM configured from another environment, created the virtual machine config file on Virtual Box, everything seemed ok. Fired it up, and it was  s   l   o   w, it took close to 10 minutes for it to load, and about 5 more to see Windows was in the process of loading before the BSOD.  Thought, maybe, just maybe it will not happen again … oh was I wrong. Frustration had already hit an all time high with this configuration and the number of issues I’ve had. How I did the troubleshooting … The best thing to do (IMO) is to step back, and gather your tools to debug this situation. Tools:  Virtual Box command line tools, Windows Debug. Virtual Box comes with a pretty good set of tools to examine, migrate and overall tasks to deal with VMs. The firs step:  use VBoxManage to prevent the VM from rebooting after the error to get enough time to really dig into the BSOD issue. Command used:   VBoxManage setextradata VMNAME "VBoxInternal/PDM/HaltOnReset" 1 Once this was done, the error reported was an “Inaccessible boot device” coming from a “Stop – 7B” type of error on the BSOD. The issue I had with this, my VM was configured to use a virtual SATA controller, and thought Windows 2008 R2 would handle this fine … again wrong!  Because the integration tools from the other product where wanting to take effect that was throwing everything off. The fix The fix was almost handed to me, edited the configuration for the VM, removed the SATA controller from it, added the virtual hard drive under an IDE controller, boot up and voilà … it works! I was then able to install the Virtual Box guest tools and such, but have decided to favor “keep on working” over “let’s try SATA again”

    Read the article

  • external usb hard drive is not being seen anymore

    - by incrediblehulk
    I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

    Read the article

  • recovering raid 0 hard disk

    - by Hiawatha
    I bumped to a huge (for me) problem. I was running dual boot system (win 7 / linux) and at some point I decided to test fedora ( I am new in Linux ). My hard disk conf: 3 hard disks each 1 TB, 2 set to raid 0 with windows running on it and 1 for linux. After installing it from live usb I found out that windows 7 is not in grub anymore and while booting shows raid error. I installed back Ubuntu and ran Disk Utility and checked now I have one disks (raid 0) failed (READ) error. First has 5 bad sectors and second has 1 bad sector. And now I dont know what to do and how to repair. further I dont know which data i could provide to get help. I tried ntfsfix and got this output: Mounting volume... NTFS signature is missing. FAILED Attempting to correct errors... NTFS signature is missing. FAILED Failed to startup volume: Invalid argument NTFS signature is missing. Trying the alternate boot sector Unrecoverable error Volume is corrupt. You should run chkdsk. #sudo ntfs-3g -o force,rw /dev/sdb /media/windows NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

    Read the article

  • Install Problems on ASUS X401A Notebook

    - by tired_of_trying
    okay... I tried many approaches to install Ubuntu 12.xxx on my new Asus notebook with varying degrees of failure... First: I'm not a newbie but I'm as frustrated as one! Install background: Install from USB DVD drive: The install went well. Re-booted machine. choose ubuntu and it errors with a MBR file error (can't remember the exact wording - something to do with missing the file. Choosing to boot W7 works fine. Install from USB Stick: Couldn't get machine to recognize the .iso Install into Oracle's Vbox: Got the boot splash screen, then hangs with a zillion errors. Note: I didn't have any problems installing ubuntu in Vbox on my iMac and it run's great. Installed using wubi: Installed fine but get errors when booting ubuntu (it doesn't find the needed wubi files). I downloaded to the C: drive and tried installing from there - no luck. For kicks: I tried running Slax Linux .iso from a USB stick and it runs fine. Some Questions: Did I use the correct .iso? (I tried 12.04.0 and 12.04.1 both 32 and 64 bit versions. I simply downloaded them from the download link and didn't use/look for an alternate version. Do I need to do something special when burning the .iso to disc? What? I did read tons of posts but, no luck with finding the solution. Any help is appreciated... thanks

    Read the article

  • Acer aspire v3 771G ubuntu 13.04

    - by Jos
    Gooday, i have this acer and i have alot of boot problems (i suspect windows 8) and now i want to try ubuntu but when i use an usb to "try" ubuntu after the boot i get a black screen. now ive read some of the forums and i found something about NOMODESET i have not tried this as i dont know what this does exactly. now i have found this wiki entry https://wiki.ubuntu.com/Bumblebee , i am by far no programmer and always reading all those commands have always kept me of linux because im scared i will !@#$ things up. is there anyway i can go to NOMODESET in the ubuntu "trial" and can i also include the bumblebee futures (coding?) and in how many ways wil this affect my laptops perfomance? reading the bumblebee entry its seems to be something about nvidia optimus and i dont reallt care much for the power saving, but will it affect any performance? im not a heavy pc gamer but i like tho do some gaming and streaming and such also on a rather big TV in wich this laptop already has it flaws in some games not running properly on 65" if this doesn't work or u advise me not to do this what else can i do to fix windows 8 or either some other linux version? i thankyou in advance

    Read the article

  • Getting error - This application has failed to start because the application configuration is incorrect. Reinsta

    - by Kaye
    I am sorry if I am repeating this issue. But I am a layman and cant understand the answers posted. I want to do away with Windows XP Professional (I have lost the product key) that I have on an old desktop PC that is more than 7/8 years old. I didnt use the PC for a couple of years as this laptop was more convenient. Now I have started to use this PC but cannot download SP2 onto the PC as it keeps asking for product key and I dont remember where I wrote it down or where I kept it. So I downloaded Ubuntu 12.10 onto the desktop screen (about 753MB and 3 hours) and then used Unetbootin to put this on my pendrive. After completing the process, I have on my pendrive 9 folders, 3 text files, 1 autorun file, 1 ldlinux file, 1 wubi application file and 5 other files - total 20 items. Though on bootup I opted for USB boot, the boot-up opens into Windows. It simply bypasses the USB where ubuntu lies. What do I do? Am I doing things correctly. Pls explain in simple terms.

    Read the article

  • b43 Firmware Error when trying to install Ubuuntu 14.04 on XP Laptop

    - by WizardNo.7
    I know I'm an Ubuntu and Linux n00b, but I've been browsing the web for a few days searching for a solution, and none of the other b43 posts etc solve my problem. I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(It's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed(which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers, and then I get the usual: [ 95.514833] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 95.514847] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 95.514855] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all the instruction on this website. After this I have to hard reboot or shut-down. I don't have a previous Linux install so cannot do the apt-get from my previous install. I cannot access the boot options menu by using F6 or similar. Any ideas? Thanks beforehand!

    Read the article

  • How do I get my Intel HD graphics to work alongside my HD7850, as my second(HDMI out) monitor?

    - by AlexTes
    Title says it all. Further info: Motherboard: http://www.asrock.com/mb/Intel/Z77%20Pro3/ Processor: http://ark.intel.com/products/65520/Intel-Core-i5-3570K-Processor-%286M-Cache-up-to-3_80-GHz%29 So currently my main screen is running on my HD7850. Got drivers from the amd website. I have looked through dozens of questions here. I'm about to try booting Ubuntu from a stick and seeing if the xorg-edgers drivers might help. When booting, all action goes down on the very screen I'm trying to get to work.*EDIT never mind this. Seems to be special boot magic. As the screen only displays whiteline errors once the gui of ubuntu has kicked in and everything graphic is happening through my graphics card again. Connected through HDMI(motherboard)-DVI. So unless having multiple displays is a huge deal the solution hopefully isn't that complicated. I just feel I'm missing something simple. If this really is complicated, I should probably just hook up the display to my graphics card. My CPU is usually the one chilling out though so I'd like to try to get that to work. Also just because I don't want to buy an extra cable and this set up makes me feel warm and fuzzy inside. Tell me what to try or look up, I'll be most appreciative. Thank you! **UPDATE The x-swat ppa installed some intel stuff. Booting with one monitor plugged into the motherboard gives nothing. Doing it with the pc already on gives the purple "Ubuntu" with 5 dots boot/shutdown screen.

    Read the article

  • How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

    - by kmm
    This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

    Read the article

  • Trouble installing from disk

    - by SuperNatural
    I'm writing this in desperation, Windows is slowly killing me and i need to change my home pc os to Ubuntu 11.04 as soon as possible. I created a USB flash drive to install ubuntu, twice, and both times they failed to begin install on restart of my pc. i read on another forum that you might have to change some boot sequence in BIOS but when pressing F2 to enter it didnt work. After a lot of cursing, I made myself an UBUNTU install cd and booted. To my excitement, it now displayed... try ubuntu and install ubuntu. i clicked install ubuntu which lead me to the preparing to install ubuntu display, i checked download updates while installing and clicked forward. The very next display is ' allocate drive space ' i assume there are meant to be options of drives provided but mine is just a blank box and underneath all the options to create a new partition table, add, change, delete and revert are all greyed out. There is a drop down menu labelled 'device for boot loader installlation' but the only option is /dev/sda. when i click install, a no root file system error comes up telling me to please correct from the partitioning menu. I am extremely frustrated. please!! can anyone help me...

    Read the article

  • Help reinstalling Ubuntu on macbook pro

    - by pipsqueaker117
    Ok. I recently installed ubuntu on my macbook pro. Unfortunately, while trying to install the nvidia graphics drivers the system wouldn't reboot, the screen grey for hours. I concluded that I had broken ubuntu, and proceeded to boot into osx and remove the ubuntu partitions. After I had done that, after a reboot, I noticed that "boot linux from hd" was still listed in the bootloader (i'm using rEFIT). I dismissed it. Now, I'm trying to reinstall ubuntu, using the same USB that I successfully installed with earlier. Now, however, when the ubuntu installer is on the "copying files" part this error (more or less) pops up. ERRNO 5: We're sorry, the installer crashed. This error frequently is caused by faulty installation media, the hard disk being too hot... and so on and so forth. I'm not sure what's causing the problem, but I have a hunch that whatever's the reason that's causing linux to show up in rEFIT is the root reason. If anyone could respond, that would be great. PS, and unfortunately no, i do not have a time machine backup.

    Read the article

  • How do I solve "System is running in low graphics issue" in Ubuntu INSTALLER ?

    - by hellodear
    I made a bootable USB for installing Ubuntu 12.04 LTS alongside Windows 8.1. I inserted my USB device and then booted into it. Then it showed me 2 options - 'Try Ubuntu' or 'Install Ubuntu'. Now I press 'Try Ubuntu' and then it says, "The system is running in low graphics mode". Then I press 'OK'. Then it showed me 4 options. Then again I click 'OK'. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. PS :- I am using Windows 8.1 with dedicated graphic card which is AMD Radeon HD 8670M. I am trying to do this in a Dell Laptop 3537 Inspiron. UPDATE :- I tried running the liveUSB session with nomodeset on and i was able to enter the installer. But when I run boot-repair(so that my Ubuntu gets detected in the GRUB menu) after installing Ubuntu successfully alongside Windows 8(following this tutorial with nomodeset on, I get the following error:- your system is running in legacy mode boot repair done

    Read the article

  • How do I get my internal HDD to mount at startup?

    - by el_gallo_azul
    It's either not intuitive or not working in Ubuntu 14.04. I want to mount my internal HDD at at startup (I boot from an SSD). I attempt to set this, following this procedure: Open Disks utility Select the disk Below the disk's Volumes, click on the More actions button Select Edit Mount Options... Select Automatic Mount Options "Off" Under Mount Options, ensure that Mount at startup is selected Click OK Enter password into Authenticate dialog box Restart but this procedure doesn't work. Upon rebooting, and after Grub attempts to start Ubuntu, I receive the error message "An error occurred while mounting /mnt/4f721fc0-8072-453f-b48f-ca686bd89549. Press S to skip mounting or M for manual recovery". That identifier "4f721fc0-8072-453f-b48f-ca686bd89549" was automatically assigned by Ubuntu. I press S and the boot process continues OK. If I try to mount the disk immediately after booting, I receive the error message "Unable to access "Storage"" (I named the volume Storage). So then I start the Disks utility and set it to Automatic Mount Options "On" and reboot. To me, it seems like this should work, but it doesn't. Here are a number of photos of the process (Alt+PrtScn doesn't work after selecting More actions).

    Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >