bryan head - Page 248 - Developer IT

How to move MOSS 2007 to another SharePoint Farm

- by DipeshBhanani

It was time of my first onsite client assignment on SharePoint. Client had one server production environment. They wanted to upgrade the topology with completely new SharePoint Farm of three servers. So, the task was to move whole MOSS 2007 stuff to the new server environment without impacting data. The last three words “… without impacting data…” were actually putting pressure on my head. Moreover SSP was required to move because additional information has been added for users apart from AD import. I thought I had to do only backup and restore. It appeared pretty easy at first thought. Just because of these three damn scary words, I thought to check out on internet for guidance related to this scenario. I couldn’t get anything except general guidance of moving server on Microsoft TechNet site. I promised myself for starting blogs with this post if I would be successful in this task. Well, I took long time to write this but finally made it. I hope it will be useful to all guys looking for SharePoint server movement. Before beginning restoration, make sure that, there is no difference in versions of SharePoint at source and destination server. Also check whether the state of SharePoint Installation at the time of backup and restore is same or not. (E.g. SharePoint related service packs and patches if any) The main tasks of the server movement are as follow: 1. Backup all the databases 2. Install and configure SharePoint on new environment 3. Deploy all solutions (WSP Files) globally to destination server- for installing features attached to the solutions 4. Install all the custom features 5. Deploy/Copy custom pages/files which are added to the “12Hive” folder later 6. Restore SSP 7. Restore My Site 8. Restore other web application Tasks 3 to 5 are for making sure that we have configured the environment well enough for the web application to be restored successfully. The main and complex task was restoring SSP. I have started restoring SSP through Central Admin. After a while, the restoration status was updated to “unsuccessful”. “Damn it, what went wrong?” I thought looking at the error detail down the page. I couldn’t remember the error message but I had corrected and restored it again. Actually once you fail restoring SSP, until and unless you don’t clean all related stuff well, your restoration will be failed again and again. I wanted to find the actual reason. So cleaned, restored, cleaned, restored… I had tried almost 5-6 times and finally, I succeeded. I had realized how pleasant it is, to see the word “Successful” on the screen. Without wasting your much time to read, let me write all the detailed steps of restoring SSP: 1. Delete the SSP through following STSADM command. stsadm -o deletessp -title <SSP name> -deletedatabases -force e.g.: stsadm -o deletessp -title SharedServices1 -deletedatabases –force 2. Check and delete the web application associated with SSP if it exists. 3. Remove Link from Check and remove “Alternate Access Mapping” associated with SSP if it exists. 4. Check and delete IIS site as well as application pool associated with SSP if it exists. 5. Stop following services: · Office SharePoint Server Search · Windows SharePoint Services Search · Windows SharePoint Services Help Search 6. Delete all the databases associated/related to SSP from SQL Server. 7. Reset IIS. 8. Start again following services: · Office SharePoint Server Search · Windows SharePoint Services Search · Windows SharePoint Services Help Search 9. Restore the new SSP. After the SSP restoration, all other stuffs had completed very smoothly without any more issues. I did few modifications to sites for change of server name and finally, the new environment was ready.

Read the article

AppHarbor - Azure Done Right AKA Heroku for .NET

- by Robz / Fervent Coder

Easy and Instant deployments and instant scale for .NET? Awhile back a few of us were looking at Ruby Gems as the answer to package management for .NET. The gems platform supported the concept of DLLs as packages although some changes would have needed to happen to have long term use for the entire community. From that we formed a partnership with some folks at Microsoft to make v2 into something that would meet wider adoption across the community, which people now call NuGet. So now we have the concept of package management. What comes next? Heroku Instant deployments and instant scaling. Stupid simple API. This is Heroku. It doesn’t sound like much, but when you think of how fast you can go from an idea to having someone else tinker with it, you can start to see its power. In literally seconds you can be looking at your rails application deployed and online. Then when you are ready to scale, you can do that. This is power. Some may call this “cloud-computing” or PaaS (Platform as a Service). I first ran into Heroku back in July when I met Nick of RubyGems.org. At the time there was no alternative in the .NET-o-sphere. I don’t count Windows Azure, mostly because it is not simple and I don’t believe there is a free version. Heroku itself would not lend itself well to .NET due to the nature of platforms and each language’s specific needs (solution stack). So I tucked the idea in the back of my head and moved on. AppHarbor Enters The Scene I’m not sure when I first heard about AppHarbor as a possible .NET version of Heroku. It may have been in November, but I didn’t actually try it until January. I was instantly hooked. AppHarbor is awesome! It still has a ways to go to be considered Heroku for .NET, but it already has a growing community. I created a video series (at the bottom of this post) that really highlights how fast you can get a product onto the web and really shows the power and simplicity of AppHarbor. Deploying is as simple as a git/hg push to appharbor. From there they build your code, run any unit tests you have and deploy it if everything succeeds. The screen on the right shows a simple and elegant UI to getting things done. The folks at AppHarbor graciously gave me a limited number of invites to hand out. If you are itching to try AppHarbor then navigate to: https://appharbor.com/account/new?inviteCode=ferventcoder After playing with it, send feedback if you want more features. Go vote up two features I want that will make it more like Heroku. Disclaimer: I am in no way affiliated with AppHarbor and have not received any funds or favors from anyone at AppHarbor. I just think it is awesome and I want others to know about it. From Zero To Deployed in 15 Minutes (Or Less) Now I have a challenge for you. I created a video series showing how fast I could go from nothing to a deployed application. It could have been from Zero to Deployed in Less than 5 minutes, but I wanted to show you the tools a little more and give you an opportunity to beat my time. And that’s the challenge. Beat my time and show it in a video response. The video series is below (at least one of the videos has to be watched on YouTube). The person with the best time by March 15th @ 11:59PM CST will receive a prize. Ground rules: .NET Application with a valid database connection Start from Zero Deployed with AppHarbor or an alternative A timer displayed in the video that runs during the entire process Video response published on YouTube or acceptable alternative Video(s) must be published by March 15th at 11:59PM CST. Either post the link here as a comment or on YouTube as a response (also by 11:59PM CST March 15th) From Zero To Deployed In 15 Minutes (Or Less) Part 1 From Zero To Deployed In 15 Minutes (Or Less) Part 2 From Zero To Deployed In 15 Minutes (Or Less) Part 3

Read the article

Highlights from the Oracle Customer Experience Summit @ OpenWorld

- by Richard Lefebvre

The Oracle Customer Experience Summit was the first-ever event covering the full breadth of Oracle's CX portfolio -- Marketing, Sales, Commerce, and Service. The purpose of the Summit was to articulate the customer experience imperative and to showcase the suite of Oracle products that can help our customers create the best possible customer experience. This topic has always been a very important one, but now that there are so many alternative companies to do business with and because people have such public ways to voice their displeasure, it's necessary for vendors to have multiple listening posts in place to gauge consumer sentiment. They need to know what is going on in real time and be able to react quickly to turn negative situations into positive ones. Those can then be shared in a social manner to enhance the brand and turn the customer into a repeat customer. The Summit was focused on Oracle's portfolio of products and entirely dedicated to customers who are committed to building great customer experiences within their businesses. Rather than DBAs, the attendees were business people looking to collaborate with other like-minded experts and find out how Oracle can help in terms of technology, best practices, and expertise. The event was at the Westin St. Francis Hotel in San Francisco as part of Oracle OpenWorld. We had eight hundred people attend, which was great for the first year. Next year, there's no doubt in my mind, we can raise that number to 5,000. Alignment and Logic Oracle's Customer Experience portfolio is made up of a combination of acquired and organic products owned by many people who are new to Oracle. We include homegrown Fusion CRM, as well as RightNow, Inquira, OPA, Vitrue, ATG, Endeca, and many others. The attendees knew of the acquisitions, so naturally they wanted to see how the products all fit together and hear the logic behind the portfolio. To tell them about our alignment, we needed to be aligned. To accomplish that, a cross functional team at Oracle agreed on the messaging so that every single Oracle presenter could cover the big picture before going deep into a product or topic. Talking about the full suite of products in one session produced overflow value for other products. And even though this internal coordination was a huge effort, everyone saw the value for our customers and for our long-term cooperation and success. Keynotes, Workshops, and Tents of Innovation We scored by having Seth Godin as our keynote speaker ? always provocative and popular. The opening keynote was a session orchestrated by Mark Hurd, Anthony Lye, and me. Mark set the stage by giving real-world examples of bad customer experiences, Anthony clearly articulated the business imperative for addressing these experiences, and I brought it all to life by taking the audience around the Customer Lifecycle and showing demos and videos, with partners included at each of the stops around the lifecycle. Brian Curran, a VP for RightNow Product Strategy, presented a session that was in high demand called The Economics of Customer Experience. People loved hearing how to build a business case and justify the cost of building a better customer experience. John Kembel, another VP for RightNow Product Strategy, held a workshop that customers raved about. It was based on the journey mapping methodology he created, which is a way to talk to customers about where they want to make improvements to their customers' experiences. He divided the audience into groups led by facilitators. Each person had the opportunity to engage with experts and peers and construct some real takeaways. The conference hotel was across from Union Square so we used that space to set up Innovation Tents. During the day we served lunch in the tents and partners showed their different innovative ideas. It was very interesting to see all the technologies and advancements. It also gave people a place to mix and mingle and to think about the fringe of where we could all take these ideas. Product Portfolio Plus Thought Leadership Of course there is always room for improvement, but the feedback on the format of the conference was positive. Ninety percent of the sessions had either a partner or a customer teamed with an Oracle presenter. The presentations weren't dry, one-way information dumps, but more interactive. I just followed up with a CEO who attended the conference with his Head of Marketing. He told me that they are using John Kembel's journey mapping methodology across the organization to pull people together. This sort of thought leadership in these highly competitive areas gives Oracle permission to engage around the technology. We have to differentiate ourselves and it's harder to do on the product side because everyone looks the same on paper. But on thought leadership ? we can, and did, take some really big steps. David Vap Group Vice President Oracle Applications Product Development

Read the article

Rkhunter 122 suspect files; do I have a problem?

- by user276166

I am new to ubuntu. I am using Xfce Ubuntu 14.04 LTS. I have ran rkhunter a few weeks age and only got a few warnings. The forum said that they were normal. But, this time rkhunter reported 122 warnings. Please advise. casey@Shaman:~$ sudo rkhunter -c [ Rootkit Hunter version 1.4.0 ] Checking system commands... Performing 'strings' command checks Checking 'strings' command [ OK ] Performing 'shared libraries' checks Checking for preloading variables [ None found ] Checking for preloaded libraries [ None found ] Checking LD_LIBRARY_PATH variable [ Not found ] Performing file properties checks Checking for prerequisites [ Warning ] /usr/sbin/adduser [ Warning ] /usr/sbin/chroot [ Warning ] /usr/sbin/cron [ OK ] /usr/sbin/groupadd [ Warning ] /usr/sbin/groupdel [ Warning ] /usr/sbin/groupmod [ Warning ] /usr/sbin/grpck [ Warning ] /usr/sbin/nologin [ Warning ] /usr/sbin/pwck [ Warning ] /usr/sbin/rsyslogd [ Warning ] /usr/sbin/useradd [ Warning ] /usr/sbin/userdel [ Warning ] /usr/sbin/usermod [ Warning ] /usr/sbin/vipw [ Warning ] /usr/bin/awk [ Warning ] /usr/bin/basename [ Warning ] /usr/bin/chattr [ Warning ] /usr/bin/cut [ Warning ] /usr/bin/diff [ Warning ] /usr/bin/dirname [ Warning ] /usr/bin/dpkg [ Warning ] /usr/bin/dpkg-query [ Warning ] /usr/bin/du [ Warning ] /usr/bin/env [ Warning ] /usr/bin/file [ Warning ] /usr/bin/find [ Warning ] /usr/bin/GET [ Warning ] /usr/bin/groups [ Warning ] /usr/bin/head [ Warning ] /usr/bin/id [ Warning ] /usr/bin/killall [ OK ] /usr/bin/last [ Warning ] /usr/bin/lastlog [ Warning ] /usr/bin/ldd [ Warning ] /usr/bin/less [ OK ] /usr/bin/locate [ OK ] /usr/bin/logger [ Warning ] /usr/bin/lsattr [ Warning ] /usr/bin/lsof [ OK ] /usr/bin/mail [ OK ] /usr/bin/md5sum [ Warning ] /usr/bin/mlocate [ OK ] /usr/bin/newgrp [ Warning ] /usr/bin/passwd [ Warning ] /usr/bin/perl [ Warning ] /usr/bin/pgrep [ Warning ] /usr/bin/pkill [ Warning ] /usr/bin/pstree [ OK ] /usr/bin/rkhunter [ OK ] /usr/bin/rpm [ Warning ] /usr/bin/runcon [ Warning ] /usr/bin/sha1sum [ Warning ] /usr/bin/sha224sum [ Warning ] /usr/bin/sha256sum [ Warning ] /usr/bin/sha384sum [ Warning ] /usr/bin/sha512sum [ Warning ] /usr/bin/size [ Warning ] /usr/bin/sort [ Warning ] /usr/bin/stat [ Warning ] /usr/bin/strace [ Warning ] /usr/bin/strings [ Warning ] /usr/bin/sudo [ Warning ] /usr/bin/tail [ Warning ] /usr/bin/test [ Warning ] /usr/bin/top [ Warning ] /usr/bin/touch [ Warning ] /usr/bin/tr [ Warning ] /usr/bin/uniq [ Warning ] /usr/bin/users [ Warning ] /usr/bin/vmstat [ Warning ] /usr/bin/w [ Warning ] /usr/bin/watch [ Warning ] /usr/bin/wc [ Warning ] /usr/bin/wget [ Warning ] /usr/bin/whatis [ Warning ] /usr/bin/whereis [ Warning ] /usr/bin/which [ OK ] /usr/bin/who [ Warning ] /usr/bin/whoami [ Warning ] /usr/bin/unhide.rb [ Warning ] /usr/bin/mawk [ Warning ] /usr/bin/lwp-request [ Warning ] /usr/bin/heirloom-mailx [ OK ] /usr/bin/w.procps [ Warning ] /sbin/depmod [ Warning ] /sbin/fsck [ Warning ] /sbin/ifconfig [ Warning ] /sbin/ifdown [ Warning ] /sbin/ifup [ Warning ] /sbin/init [ Warning ] /sbin/insmod [ Warning ] /sbin/ip [ Warning ] /sbin/lsmod [ Warning ] /sbin/modinfo [ Warning ] /sbin/modprobe [ Warning ] /sbin/rmmod [ Warning ] /sbin/route [ Warning ] /sbin/runlevel [ Warning ] /sbin/sulogin [ Warning ] /sbin/sysctl [ Warning ] /bin/bash [ Warning ] /bin/cat [ Warning ] /bin/chmod [ Warning ] /bin/chown [ Warning ] /bin/cp [ Warning ] /bin/date [ Warning ] /bin/df [ Warning ] /bin/dmesg [ Warning ] /bin/echo [ Warning ] /bin/ed [ OK ] /bin/egrep [ Warning ] /bin/fgrep [ Warning ] /bin/fuser [ OK ] /bin/grep [ Warning ] /bin/ip [ Warning ] /bin/kill [ Warning ] /bin/less [ OK ] /bin/login [ Warning ] /bin/ls [ Warning ] /bin/lsmod [ Warning ] /bin/mktemp [ Warning ] /bin/more [ Warning ] /bin/mount [ Warning ] /bin/mv [ Warning ] /bin/netstat [ Warning ] /bin/ping [ Warning ] /bin/ps [ Warning ] /bin/pwd [ Warning ] /bin/readlink [ Warning ] /bin/sed [ Warning ] /bin/sh [ Warning ] /bin/su [ Warning ] /bin/touch [ Warning ] /bin/uname [ Warning ] /bin/which [ OK ] /bin/kmod [ Warning ] /bin/dash [ Warning ] [Press <ENTER> to continue] Checking for rootkits... Performing check of known rootkit files and directories 55808 Trojan - Variant A [ Not found ] ADM Worm [ Not found ] AjaKit Rootkit [ Not found ] Adore Rootkit [ Not found ] aPa Kit [ Not found ] Apache Worm [ Not found ] Ambient (ark) Rootkit [ Not found ] Balaur Rootkit [ Not found ] BeastKit Rootkit [ Not found ] beX2 Rootkit [ Not found ] BOBKit Rootkit [ Not found ] cb Rootkit [ Not found ] CiNIK Worm (Slapper.B variant) [ Not found ] Danny-Boy's Abuse Kit [ Not found ] Devil RootKit [ Not found ] Dica-Kit Rootkit [ Not found ] Dreams Rootkit [ Not found ] Duarawkz Rootkit [ Not found ] Enye LKM [ Not found ] Flea Linux Rootkit [ Not found ] Fu Rootkit [ Not found ] Fuck`it Rootkit [ Not found ] GasKit Rootkit [ Not found ] Heroin LKM [ Not found ] HjC Kit [ Not found ] ignoKit Rootkit [ Not found ] IntoXonia-NG Rootkit [ Not found ] Irix Rootkit [ Not found ] Jynx Rootkit [ Not found ] KBeast Rootkit [ Not found ] Kitko Rootkit [ Not found ] Knark Rootkit [ Not found ] ld-linuxv.so Rootkit [ Not found ] Li0n Worm [ Not found ] Lockit / LJK2 Rootkit [ Not found ] Mood-NT Rootkit [ Not found ] MRK Rootkit [ Not found ] Ni0 Rootkit [ Not found ] Ohhara Rootkit [ Not found ] Optic Kit (Tux) Worm [ Not found ] Oz Rootkit [ Not found ] Phalanx Rootkit [ Not found ] Phalanx2 Rootkit [ Not found ] Phalanx2 Rootkit (extended tests) [ Not found ] Portacelo Rootkit [ Not found ] R3dstorm Toolkit [ Not found ] RH-Sharpe's Rootkit [ Not found ] RSHA's Rootkit [ Not found ] Scalper Worm [ Not found ] Sebek LKM [ Not found ] Shutdown Rootkit [ Not found ] SHV4 Rootkit [ Not found ] SHV5 Rootkit [ Not found ] Sin Rootkit [ Not found ] Slapper Worm [ Not found ] Sneakin Rootkit [ Not found ] 'Spanish' Rootkit [ Not found ] Suckit Rootkit [ Not found ] Superkit Rootkit [ Not found ] TBD (Telnet BackDoor) [ Not found ] TeLeKiT Rootkit [ Not found ] T0rn Rootkit [ Not found ] trNkit Rootkit [ Not found ] Trojanit Kit [ Not found ] Tuxtendo Rootkit [ Not found ] URK Rootkit [ Not found ] Vampire Rootkit [ Not found ] VcKit Rootkit [ Not found ] Volc Rootkit [ Not found ] Xzibit Rootkit [ Not found ] zaRwT.KiT Rootkit [ Not found ] ZK Rootkit [ Not found ] [Press <ENTER> to continue] Performing additional rootkit checks Suckit Rookit additional checks [ OK ] Checking for possible rootkit files and directories [ None found ] Checking for possible rootkit strings [ None found ] Performing malware checks Checking running processes for suspicious files [ None found ] Checking for login backdoors [ None found ] Checking for suspicious directories [ None found ] Checking for sniffer log files [ None found ] Performing Linux specific checks Checking loaded kernel modules [ OK ] Checking kernel module names [ OK ] [Press <ENTER> to continue] Checking the network... Performing checks on the network ports Checking for backdoor ports [ None found ] Checking for hidden ports [ Skipped ] Performing checks on the network interfaces Checking for promiscuous interfaces [ None found ] Checking the local host... Performing system boot checks Checking for local host name [ Found ] Checking for system startup files [ Found ] Checking system startup files for malware [ None found ] Performing group and account checks Checking for passwd file [ Found ] Checking for root equivalent (UID 0) accounts [ None found ] Checking for passwordless accounts [ None found ] Checking for passwd file changes [ Warning ] Checking for group file changes [ Warning ] Checking root account shell history files [ None found ] Performing system configuration file checks Checking for SSH configuration file [ Not found ] Checking for running syslog daemon [ Found ] Checking for syslog configuration file [ Found ] Checking if syslog remote logging is allowed [ Not allowed ] Performing filesystem checks Checking /dev for suspicious file types [ Warning ] Checking for hidden files and directories [ Warning ] [Press <ENTER> to continue] System checks summary ===================== File properties checks... Required commands check failed Files checked: 137 Suspect files: 122 Rootkit checks... Rootkits checked : 291 Possible rootkits: 0 Applications checks... All checks skipped The system checks took: 5 minutes and 11 seconds All results have been written to the log file (/var/log/rkhunter.log)

Read the article

Agile Testing Days 2012 – My First Conference!

- by Chris George

I’d like to give you a bit of background first… so please bear with me! In 1996, whilst studying for my final year of my degree, I applied for a job as a C++ Developer at a small software house in Hertfordshire After bodging up the technical part of the interview I didn’t get the job, but was offered a position as a QA Engineer instead. The role sounded intriguing and the pay was pretty good so in the absence of anything else I took it. Here began my career in the world of software testing! Back then, testing/QA was often an afterthought, something that was bolted on to the development process and very much a second class citizen. Test automation was rare, and tools were basic or non-existent! The internet was just starting to take off, and whilst there might have been testing communities and resources, we were certainly not exposed to any of them. After 8 years I moved to another small company, and again didn’t find myself exposed to any of the changes that were happening in the industry. It wasn’t until I joined Red Gate in 2008 that my view of testing and software development as a whole started to expand. But it took a further 4 years for my view of testing to be totally blown open, and so the story really begins… In May 2012 I was fortunate to land the role of Head of Test Engineering. Soon after, I received an email with details for the “Agile Testi However, in my new role, I decided that it was time to bite the bullet and at least go to one conference. Perhaps I could get some new ideas to supplement and support some of the ideas I already had.ng Days” conference in Potsdam, Germany. I looked over the suggested programme and some of the talks peeked my interest. For numerous reasons I’d shied away from attending conferences in the past, one of the main ones being that I didn’t see much benefit in attending loads of talks when I could just read about stuff like that on the internet. So, on the 18th November 2012, myself and three other Red Gaters boarded a plane at Heathrow bound for Potsdam, Germany to attend Agile Testing Days 2012. Tutorial Day – “Software Testing Reloaded” We chose to do the tutorials on the 19th, I chose the one titled “Software Testing Reloaded – So you wanna actually DO something? We’ve got just the workshop for you. Now with even less powerpoint!”. With such a concise and serious title I just had to see what it was about! I nervously entered the room to be greeted by tables, chairs etc all over the place, not set out and frankly in one hell of a mess! There were a few people in there playing a game with dice. Okaaaay… this is going to be a long day! Actually the dice game was an exercise in deduction and simplification… I found it very interesting and is certainly something I’ll be using at work as a training exercise! (I won’t explain the game here cause I don’t want to let the cat out of the bag…) The tutorial consisted of several games, exploring different aspects of testing. They were all practical yet required a fair amount of thin king. Matt Heusser and Pete Walen were running the tutorial, and presented it in a very relaxed and light-hearted manner. It was really my first experience of working in small teams with testers from very different backgrounds, and it was really enjoyable. Matt & Pete were very approachable and offered advice where required whilst still making you work for the answers! One of the tasks was to devise several strategies for testing some electronic dice. The premise was that a Vegas casino wanted to use the dice to appeal to the twenty-somethings interested in tech, but needed assurance that they were as reliable and random as traditional dice. This was a very interesting and challenging exercise that forced us to challenge various assumptions, determine/clarify requirements but most of all it was frustrating because the dice made a very very irritating beeping noise. Multiple that by at least 12 dice and I was dreaming about them all that night!! Some of the main takeaways that were brilliantly demonstrated through the games were not to make assumptions, challenge requirements, and have fun testing! The tutorial lasted the whole day, but to be honest the day went very quickly! My introduction into the conference experience started very well indeed, and I would talk to both Matt and Pete several times during the 4 days. Days 1,2 & 3 will be coming soon…

Read the article

jQuery with SharePoint solutions

- by KunaalKapoor

For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced. In other words, take into account your world before applying it.Script your deployment options. Folder in SPD. Use the file system. Make external references. The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP). Drop it on the page and it’s there. Easy but dangerousCustom Actions. Great for global deployments of JQuery. Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP. Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity. Any scripts run with the same privileges of the current user. In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM. There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries. Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use. You can add it to your page with a script, put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'> if (typeof jQuery == 'undefined') document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor. You can get past that, “But it looks like SharePoint” Take a long list view and put it into JQuery with pagination, etc and you are the hero. It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem. If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers. Take into account client resourcesHarm the Farm - You need to code wisely and negatively test. Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again. So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake. They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

Read the article

Drive Online Engagement with Intuitive Portals and Websites

- by kellsey.ruppel

As more and more business is being conducted via online channels, engaging users and making them more productive and efficient though these online channels is becoming critical. These users could be customers, partners or employees and while the respective channels through which they interact might be different, these users do increasingly interact with your business through the Web, or mobile devices or now through various social mediums. Businesses need a user engagement strategy and solution that allows them to deliver targeted and personalized content and applications to users through the various online mediums and touch points. The customer experience today is made up of an ongoing set of interactions with organizations across many channels, online and offline. The Direct channel (including sales reps, email and mail) is an important point of contact, as is the Contact Center. Contact Centers rely on the phone as a means of interacting with customers, and also more now than ever, the Web as well. However, the online organization is often managed separately from the Contact Center organization within a business. In-store is an important channel for retailers, offering Point-of-Service for human interactions, and Kiosks which enable self-service. Kiosks are a Web-enabled touch point but in-store kiosks are often managed by the head of retail operations, rather than the online organization. And of course, the online channel, including customer interactions with an organization via digital means -- on the website, mobile websites, and social networking sites, has risen to paramount importance in recent years in the customer experience. Historically all of these channels have been managed separately. The result of all of this fragmentation is that the customer touch points with an organization are siloed. Their interactions online are not known and respected in their dealings in-store. Their calls to the contact center are not taken as input into what the website offers them when they arrive. Think of how many times you’ve fallen victim to this. Your experience with the company call center is different than the experience in-store. Your experience with the company website on your desktop computer is different than your experience on your iPad. I think you get the point. But the customer isn’t the only one we need to look at here, as employees and the IT organization have challenges as well when it comes to online engagement. There are many common tools and technologies that organizations have been using to try and engage users, whether it’s customers, employees or partners. Some have adopted different blog and wiki technologies (some hosted, some open source, sometimes embedded in platforms), to things like tagging, file sharing and content management, or composite applications for self-service applications and activity streams. Basically, there are so many different tools & technologies that each address different aspects of user engagement. Now, one of the challenges with this, is that if we look at each individual tool, typically just implementing for example a file sharing and basic collaboration solution, may meet the needs of the business user for one aspect of user engagement, but it may not be the best solution to engage with customers and partners, or it may not fit with IT standards such as integrating with their single sign on tools or their corporate website. Often, the scenario is that businesses are having to acquire multiple pieces and parts as well as build custom applications to meet their needs. Leaving customers and partners with a more fragmented way of interacting with the company. Every organization has some sort of enterprise balancing act between the needs of the business user and the needs and restrictions enforced by enterprise IT groups. As we’ve been discussing, we all know that the expectations for online engagement have changed since the days of the static, one-size fits all website. With these changes have come some very difficult organizational challenges as well. Today, as a business user, you want to engage with your customers, and your customers expect you to know who they are. They expect you to recall the details they’ve provided to you on your website, to your CSRs and to your sales people. They expect you to remember their purchases, their preferences and their problems. And they expect you to know who they are, equally well, across channels, including your web presence. This creates a host of challenges for today’s business users. Delivering targeted, relevant content online is now essential for converting prospects into customers and for engendering long term loyalty. Business users need the ability to leverage customer data from different sources to fuel their segmentation and targeting strategies and to easily set-up, manage and optimize online campaigns. Also critical, they need the ability to accomplish these things on-the-fly, at the speed of the marketplace, while making iterative improvements. These changing expectations put a host of demands on the IT organization as well. The web presence must be able to scale to support the delivery of personalized and targeted content to thousands of site visitors without sacrificing performance. And integration between systems becomes more important as well, as organizations strive to obtain one view of the customer culled from WCM data, CRM data and more. So then, how do you solve these challenges and meet the growing demands of your users? You need a solution that: Unifies every customer interaction across all channels Personalizes the products and content that interest the customer and to the device Delivers targeted promotions to the right customer Engages and improve employee productivity Provides self-service access to applications Includes embedded in-context social So how then do you achieve this level of online engagement, complete customer experience and engage your employees? The answer: Oracle WebCenter. If you want to learn how to get there, we encourage you to attend this webcast on Thursday Drive Online Engagement with Intuitive Portals and Websites, where we'll talk about how you are able to transform your portal experience and optimize online engagement -- making your portals more interactive and more engaging across multiple channels. Register today!

Read the article

Seizing the Moment with Mobility

- by Divya Malik

Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog. Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

Read the article

My error with upgrading 4.0 to 4.2- What NOT to do...

- by Steve Tunstall

Last week, I was helping a client upgrade from the 2011.1.4.0 code to the newest 2011.1.4.2 code. We downloaded the 4.2 update from MOS, upload and unpacked it on both controllers, and upgraded one of the controllers in the cluster with no issues at all. As this was a brand-new system with no networking or pools made on it yet, there were not any resources to fail back and forth between the controllers. Each controller had it's own, private, management interface (igb0 and igb1) and that's it. So we took controller 1 as the passive controller and upgraded it first. The first controller came back up with no issues and was now on the 4.2 code. Great. We then did a takeover on controller 1, making it the active head (although there were no resources for it to take), and then proceeded to upgrade controller 2. Upon upgrading the second controller, we ran the health check with no issues. We then ran the update and it ran and rebooted normally. However, something strange then happened. It took longer than normal to come back up, and when it did, we got the "cluster controllers on different code" error message that one gets when the two controllers of a cluster are running different code. But we just upgraded the second controller to 4.2, so they should have been the same, right??? Going into the Maintenance-->System screen of controller 2, we saw something very strange. The "current version" was still on 4.0, and the 4.2 code was there but was in the "previous" state with the rollback icon, as if it was the OLDER code and not the newer code. I have never seen this happen before. I would have thought it was a bad 4.2 code file, but it worked just fine with controller 1, so I don't think that was it. Other than the fact the code did not update, there was nothing else going on with this system. It had no yellow lights, no errors in the Problems section, and no errors in any of the logs. It was just out of the box a few hours ago, and didn't even have a storage pool yet. So.... We deleted the 4.2 code, uploaded it from scratch, ran the health check, and ran the upgrade again. once again, it seemed to go great, rebooted, and came back up to the same issue, where it came to 4.0 instead of 4.2. See the picture below.... HERE IS WHERE I MADE A BIG MISTAKE.... I SHOULD have instantly called support and opened a Sev 2 ticket. They could have done a shared shell and gotten the correct Fishwork engineer to look at the files and the code and determine what file was messed up and fixed it. The system was up and working just fine, it was just on an older code version, not really a huge problem at all. Instead, I went ahead and clicked the "Rollback" icon, thinking that the system would rollback to the 4.2 code. Ouch... What happened was that the system said, "Fine, I will delete the 4.0 code and boot to your 4.2 code"... Which was stupid on my part because something was wrong with the 4.2 code file here and the 4.0 was just fine. So now the system could not boot at all, and the 4.0 code was completely missing from the system, and even a high-level Fishworks engineer could not help us. I had messed it up good. We could only get to the ILOM, and I had to re-image the system from scratch using a hard-to-get-and-use FishStick USB drive. These are tightly controlled and difficult to get, almost always handcuffed to an engineer who will drive out to re-image a system. This took another day of my client's time. So.... If you see a "previous version" of your system code which is actually a version higher than the current version... DO NOT ROLL IT BACK.... It did not upgrade for a very good reason. In my case, after the system was re-imaged to a code level just 3 back, we once again tried the same 4.2 code update and it worked perfectly the first time and is now great and stable. Lesson learned. By the way, our buddy Ryan Matthews wanted to point out the best practice and supported way of performing an upgrade of an active/active ZFSSA, where both controllers are doing some of the work. These steps would not have helpped me for the above issue, but it's important to follow the correct proceedure when doing an upgrade. 1) Upload software to both controllers and wait for it to unpack 2) On controller "A" navigate to configuration/cluster and click "takeover" 3) Wait for controller "B" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 4) Wait for controller "B" to apply the update and finish rebooting 5) Login to controller "B", navigate to configuration/cluster and click "takeover" 6) Wait for controller "A" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 7) Wait for controller "A" to apply the update and finish rebooting 8) Login to controller "B", navigate to configuration/cluster and click "failback"

Read the article

Where would a spam bot be located?

- by Tim

I have a hosted website using a free hosting service, I received an email this afternoon saying that I have been suspended because my account has been compromised. Basically, someone is using my email account to mass send spam. I've changed all the passwords and everything but when my Gmail pulls the emails from the host it's still downloading loads of spam messages that show like this: This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] SMTP error from remote mail server after end of data: host 198.91.80.251 [198.91.80.251]: 554 5.6.0 id=23634-03 - Rejected by MTA on relaying, from MTA([127.0.0.1]:10030): 554 Error: This email address has lost rights to send email from the system ------ This is a copy of the message, including all the headers. ------ Return-path: <[email protected]> Received: from keenesystems.com ([66.135.33.211]:2370 helo=server211) by absolut.x10hosting.com with esmtpsa (TLSv1:RC4-MD5:128) (Exim 4.77) (envelope-from <[email protected]>) id 1TGwSW-002hHe-Lc for [email protected]; Wed, 26 Sep 2012 13:35:44 -0500 MIME-Version: 1.0 Date: Wed, 26 Sep 2012 13:35:43 -0500 X-Priority: 3 (Normal) X-Mailer: Ximian Evolution 3.9.9 (8.5.3-6) Subject: New staff members wanted at Auction It Online From: [email protected] Reply-To: [email protected] To: "Nadia Monti" <[email protected]> Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Message-ID: <OUTLOOK-IDM-9aed7054-6a3e-e1a4-1d5c-3e73377652a6@server211> Date : 26 September 2012=0ATime : 13:35=0ASender : Dennise Halcomb Head = Office Manager of RJ Auction Drop-Off Int.=0A=0ANice to meet you Nadia M= onti=0A=0ARJ ADO Ltd., a USA based company, offers a significant amount = of goods worldwide for our customers on eBay and other auction venues. = Our company's main target is to provide a suitable and cost-effective se= rvice for any person, company or fundraising company. The main purpose o= f the administrative assistant / sales support representative is to cont= ribute to the sales force and add convenience to our cost-effective serv= ice dedicated to individuals, businesses, and organizations worldwide. O= ur HR department obtained your resume from one of the various job-orient= ed websites just to offer you this post.=0A=0AWorking Schedule: This is = a part time and home-based offer. You won't need to spend more than 3 ho= urs each day. Your =0Aschedule will be flexible.=0A=0ASalary: At the end= of the trial period (it lasts for 1 month) you will be paid 1,800 EUR. = With the average volume of clients your overall income will raise up to = 3,000 EUR per month. After the trial period is over your base salary wil= l grow up to 2,500 EUR per month, so you will earn 5% commission from th= e transactions completed.=0A=0AWhere?: Italy Wide. As it is a stay at ho= me position all the communication will be carried out via email and via = phone.=0A=0ARequirements: Access to the internet during the workday and = basic microsoft office skills are needed. Basic knowledge of English is = required (most of the contacts will be in English).=0A=0ACosts and Fees:= There are NO costs at any time for our employees. All fees related to t= his position are covered by the RJ ADO Co. Ltd..=0A=0AFurther Hiring Pro= cess: If you are interested in position we offer, please reply to this e= mail and send us the copy of your resume for verification.=0A=0AAfter re= viewing all of the received applications we will reply to successful app= licants only. Then we'll offer to these successful applicants a position= within our firm on a trial period basis for one month beginning from th= e date you sign a trial agreement. During this trial period you will rec= eive full guidance and support. Employees on a one monthly trial period = are evaluated at least one week prior to the end of their trial. During = the trial, your supervisor can recommend termination. At the end of the = trial period, the supervisor can offer continued employment, extension o= f trial period, or termination. After the trial period you may ask for m= ore hours or continue full-time.=0A=0AIf you are interested in this posi= tion, just reply to this email and send any questions you have and the c= opy of your resume for verification.=0A=0AThank You,=0AHR-Manager of RJ = ADO Co. Ltd.=0A=0APermission Settings=0AYou have been referred to RJ Auc= tion Drop-Off If you feel you received this email in error or do not wis= h to receive future messages, please reply to this message with "remove"= in the subject field. We will immediately update our database according= ly. =0AWe apologize for any inconvenience caused.=0A=0ARJ Auction Drop-O= ff Co. Ltd. I'm not aware of how this has happened. I'm not sure how anyone could have got hold of my password. It's a simple wordpress install, at some point recently my host went down and there was a fresh install of wordpress with default admin accounts, I have a feeling it could be something to do with this. My question is, even though I've changed all my passwords it's all still happening, is there annywhere in paticular this script would be stored on my host. I really can't deal with having my hosting account suspended and my email account sending all this spam.

Read the article

SQL SERVER – Backing Up and Recovering the Tail End of a Transaction Log – Notes from the Field #042

- by Pinal Dave

[Notes from Pinal]: The biggest challenge which people face is not taking backup, but the biggest challenge is to restore a backup successfully. I have seen so many different examples where users have failed to restore their database because they made some mistake while they take backup and were not aware of the same. Tail Log backup was such an issue in earlier version of SQL Server but in the latest version of SQL Server, Microsoft team has fixed the confusion with additional information on the backup and restore screen itself. Now they have additional information, there are a few more people confused as they have no clue about this. Previously they did not find this as a issue and now they are finding tail log as a new learning. Linchpin People are database coaches and wellness experts for a data driven world. In this 42nd episode of the Notes from the Fields series database expert Tim Radney (partner at Linchpin People) explains in a very simple words, Backing Up and Recovering the Tail End of a Transaction Log. Many times when restoring a database over an existing database SQL Server will warn you about needing to make a tail end of the log backup. This might be your reminder that you have to choose to overwrite the database or could be your reminder that you are about to write over and lose any transactions since the last transaction log backup. You might be asking yourself “What is the tail end of the transaction log”. The tail end of the transaction log is simply any committed transactions that have occurred since the last transaction log backup. This is a very crucial part of a recovery strategy if you are lucky enough to be able to capture this part of the log. Most organizations have chosen to accept some amount of data loss. You might be shaking your head at this statement however if your organization is taking transaction logs backup every 15 minutes, then your potential risk of data loss is up to 15 minutes. Depending on the extent of the issue causing you to have to perform a restore, you may or may not have access to the transaction log (LDF) to be able to back up those vital transactions. For example, if the storage array or disk that holds your transaction log file becomes corrupt or damaged then you wouldn’t be able to recover the tail end of the log. If you do have access to the physical log file then you can still back up the tail end of the log. In 2013 I presented a session at the PASS Summit called “The Ultimate Tail Log Backup and Restore” and have been invited back this year to present it again. During this session I demonstrate how you can back up the tail end of the log even after the data file becomes corrupt. In my demonstration I set my database offline and then delete the data file (MDF). The database can’t become more corrupt than that. I attempt to bring the database back online to change the state to RECOVERY PENDING and then backup the tail end of the log. I can do this by specifying WITH NO_TRUNCATE. Using NO_TRUNCATE is equivalent to specifying both COPY_ONLY and CONTINUE_AFTER_ERROR. It as its name says, does not try to truncate the log. This is a great demo however how could I achieve backing up the tail end of the log if the failure destroys my entire instance of SQL and all I had was the LDF file? During my demonstration I also demonstrate that I can attach the log file to a database on another instance and then back up the tail end of the log. If I am performing proper backups then my most recent full, differential and log files should be on a server other than the one that crashed. I am able to achieve this task by creating new database with the same name as the failed database. I then set the database offline, delete my data file and overwrite the log with my good log file. I attempt to bring the database back online and then backup the log with NO_TRUNCATE just like in the first example. I encourage each of you to view my blog post and watch the video demonstration on how to perform these tasks. I really hope that none of you ever have to perform this in production, however it is a really good idea to know how to do this just in case. It really isn’t a matter of “IF” you will have to perform a restore of a production system but more of a “WHEN”. Being able to recover the tail end of the log in these sever cases could be the difference of having to notify all your business customers of data loss or not. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Note: Tim has also written an excellent book on SQL Backup and Recovery, a must have for everyone. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Taking the Plunge - or Dipping Your Toe - into the Fluffy IAM Cloud by Paul Dhanjal (Simeio Solutions)

- by Greg Jensen

In our last three posts, we’ve examined the revolution that’s occurring today in identity and access management (IAM). We looked at the business drivers behind the growth of cloud-based IAM, the shortcomings of the old, last-century IAM models, and the new opportunities that federation, identity hubs and other new cloud capabilities can provide by changing the way you interact with everyone who does business with you. In this, our final post in the series, we’ll cover the key things you, the enterprise architect, should keep in mind when considering moving IAM to the cloud. Invariably, what starts the consideration process is a burning business need: a compliance requirement, security vulnerability or belt-tightening edict. Many on the business side view IAM as the “silver bullet” – and for good reason. You can almost always devise a solution using some aspect of IAM. The most critical question to ask first when using IAM to address the business need is, simply: is my solution complete? Typically, “business” is not focused on the big picture. Understandably, they’re focused instead on the need at hand: Can we be HIPAA compliant in 6 months? Can we tighten our new hire, employee transfer and termination processes? What can we do to prevent another password breach? Can we reduce our service center costs by the end of next quarter? The business may not be focused on the complete set of services offered by IAM but rather a single aspect or two. But it is the job – indeed the duty – of the enterprise architect to ensure that all aspects are being met. It’s like remodeling a house but failing to consider the impact on the foundation, the furnace or the zoning or setback requirements. While the homeowners may not be thinking of such things, the architect, of course, must. At Simeio Solutions, the way we ensure that all aspects are being taken into account – to expose any gaps or weaknesses – is to assess our client’s IAM capabilities against a five-step maturity model ranging from “ad hoc” to “optimized.” The model we use is similar to Capability Maturity Model Integration (CMMI) developed by the Software Engineering Institute (SEI) at Carnegie Mellon University. It’s based upon some simple criteria, which can provide a visual representation of how well our clients fair when evaluated against four core categories: · Program Governance · Access Management (e.g., Single Sign-On) · Identity and Access Governance (e.g., Identity Intelligence) · Enterprise Security (e.g., DLP and SIEM) Often our clients believe they have a solution with all the bases covered, but the model exposes the gaps or weaknesses. The gaps are ideal opportunities for the cloud to enter into the conversation. The complete process is straightforward: 1. Look at the big picture, not just the immediate need – what is our roadmap and how does this solution fit? 2. Determine where you stand with respect to the four core areas – what are the gaps? 3. Decide how to cover the gaps – what role can the cloud play? Returning to our home remodeling analogy, at some point, if gaps or weaknesses are discovered when evaluating the complete impact of the proposed remodel – if the existing foundation wouldn’t support the new addition, for example – the owners need to decide if it’s time to move to a new house instead of trying to remodel the old one. However, with IAM it’s not an either-or proposition – i.e., either move to the cloud or fix the existing infrastructure. It’s possible to use new cloud technologies just to cover the gaps. Many of our clients start their migration to the cloud this way, dipping in their toe instead of taking the plunge all at once. Because our cloud services offering is based on the Oracle Identity and Access Management Suite, we can offer a tremendous amount of flexibility in this regard. The Oracle platform is not a collection of point solutions, but rather a complete, integrated, best-of-breed suite. Yet it’s not an all-or-nothing proposition. You can choose just the features and capabilities you need using a pay-as-you-go model, incrementally turning on and off services as needed. Better still, all the other capabilities are there, at the ready, whenever you need them. Spooling up these cloud-only services takes just a fraction of the time it would take a typical organization to deploy internally. SLAs in the cloud may be higher than on premise, too. And by using a suite of software that’s complete and integrated, you can dramatically lower cost and complexity. If your in-house solution cannot be migrated to the cloud, you might consider using hardware appliances such as Simeio’s Cloud Interceptor to extend your enterprise out into the network. You might also consider using Expert Managed Services. Cost is usually the key factor – not just development costs but also operational sustainment costs. Talent or resourcing issues often come into play when thinking about sustaining a program. Expert Managed Services such as those we offer at Simeio can address those concerns head on. In a cloud offering, identity and access services lend to the new paradigms described in my previous posts. Most importantly, it allows us all to focus on what we're meant to do – provide value, lower costs and increase security to our respective organizations. It’s that magic “silver bullet” that business knew you had all along. If you’d like to talk more, you can find us at simeiosolutions.com.

Read the article

Identity Globe Trotters (Sep Edition): The Social Customer

- by Tanu Sood

Welcome to the inaugural edition of our monthly series - Identity Globe Trotters. Starting today, the last Friday of every month, we will explore regional commentary on Identity Management. We will invite guest contributors from around the world to share their opinions and experiences around Identity Management and highlight regional nuances, specific drivers, solutions and more. Today's feature is contributed by Michael Krebs, Head of Business Development at esentri consulting GmbH, a (SOA) specialized Oracle Gold Partner based in Ettlingen, Germany. In his current role, Krebs is dealing with the latest developments in Enterprise Social Networking and the Integration of Social Media within business processes. By Michael Krebs The relevance of "easy sign-on" in the age of the "Social Customer" With the growth of Social Networks, the time people spend within those closed "eco-systems" is growing year by year. With social networks looking to integrate search engines, like Facebook announced some weeks ago, their relevance will continue to grow in contrast to the more conventional search engines. This is one of the reasons why social network accounts of the users are getting more and more like a virtual fingerprint. With the growing relevance of social networks the importance of a simple way for customers to get in touch with say, customer care or contract departments, will be crucial for sales processes in critical markets. Customers want to have one single point of contact and also an easy "login-method" with no dedicated usernames, passwords or proprietary accounts. The golden rule in the future social media driven markets will be: The lower the complexity of the initial contact, the better a company can profit from social networks. If you, for example, can generate a smart way of how an existing customer can use self-service portals, the cost in providing phone support can be lowered significantly. Recruiting and Hiring of "Digital Natives" Another particular example is "social" recruiting processes. The so called "digital natives" don´t want to type in their profile facts and CV´s in proprietary systems. Why not use the actual LinkedIn profile? In German speaking region, the market in the area of professional social networks is dominated by XING, the equivalent to LinkedIn. A few weeks back, this network also opened up their interfaces for integrating social sign-ons or the usage of profile data for recruiting-purposes. In the European (and especially the German) employment market, where the number of young candidates is shrinking because of the low birth rate in the region, it will become essential to use social-media supported hiring processes to find and on-board the rare talents. In fact, you will see traditional recruiting websites integrated with social hiring to attract the best talents in the market, where the pool of potential candidates has decreased dramatically over the years. Identity Management as a key factor in the Customer Experience process To create the biggest value for customers and also future employees, companies need to connect their HCM or CRM-systems with powerful Identity management solutions. With the highly efficient Oracle (social & mobile enabling) Identity Management solution, enterprises can combine easy sign on with secure connections to the backend infrastructure. This combination enables a "one-stop" service with personalized content for customers and talents. In addition, companies can collect valuable data for the enrichment of their CRM-data. The goal is to enrich the so called "Customer Experience" via all available customer channels and contact points. Those systems have already gained importance in the B2C-markets and will gradually spread out to B2B-channels in the near future. Conclusion: Central and "Social" Identity management is key to Customer Experience Management and Talent Management For a seamless delivery of "Customer Experience Management" and a modern way of recruiting the best talent, companies need to integrate Social Sign-on capabilities with modern CX - and Talent management infrastructure. This lowers the barrier for existing and future customers or employees to get in touch with sales, support or human resources. Identity management is the technology enabler and backbone for a modern Customer Experience Infrastructure. Oracle Identity management solutions provide the opportunity to secure Social Applications and connect them with modern CX-solutions. At the end, companies benefit from "best of breed" processes and solutions for enriching customer experience without compromising security. About esentri: esentri is a provider of enterprise social networking and brings the benefits of social network communication into business environments. As one key strength, esentri uses Oracle Identity Management solutions for delivering Social and Mobile access for Oracle’s CRM- and HCM-solutions. …..End Guest Post…. With new and enhanced features optimized to secure the new digital experience, the recently announced Oracle Identity Management 11g Release 2 enables organizations to securely embrace cloud, mobile and social infrastructures and reach new user communities to help further expand and develop their businesses. Additional Resources: Oracle Identity Management 11gR2 release Oracle Identity Management website Datasheet: Mobile and Social Access (pdf) IDM at OOW: Focus on Identity Management Facebook: OracleIDM Twitter: OracleIDM We look forward to your feedback on this post and welcome your suggestions for topics to cover in Identity Globe Trotters. Last Friday, every month!

Read the article

Waiting for Windows 8: A Long, Hot Summer

- by andrewbrust

Microsoft has revealed some things about Windows 8, and revealed a part of the developer story for new Windows 8 “tailored,” “immersive” applications. In retrospect, very little was shared. The bit that was revealed to us is that those applications can be developed using a combination of HTML 5 and JavaScript. Not much else was said, except that additional details would be revealed at Microsoft’s //Build/ conference in Anaheim, California in September. This has left a lot of people in suspense, and it seems that suspended state is going to last all summer. The problem, of course, is that in the absence of hard information, people fill the void with Speculation, Rumor and Gloom. That’s a bit like Fear, Uncertainty and Doubt, except that it’s self-imposed by the Microsoft community and not planted by Microsoft’s competitors. This is a less-than-perfect situation. Not only is it causing developers to worry about the value of their skill sets, but I am already hearing from consulting shops that customers are getting nervous too and, in extreme cases, opting for non-Microsoft tools for their projects as a result. I’m also hearing from dev tool ISVs that sales have suffered as a result. It’s quite possible that the customers moving off .NET wanted to do so anyway and it’s also possible that dev tool ISVs are suffering slower sales this year due a slowed rate of economic recovery. Without hard information, tend to people interpret things negatively. Actually, that’s the major point in all of this. While there is multitude of opinions about what the Windows 8 development platform will look like once fully revealed, there is an emerging consensus around one thing: it sure would help if Microsoft revealed more of its strategy…just enough to quash absurd rumors, stabilize the .NET ecosystem and get people to stay calm. We’ve had some reassurances thus far: there will be a Windows desktop mode; we’ll still have Windows Explorer, we’ll still run Office, we’ll still have a task bar, and all the skills and tools we use now will still work there. But with reassurances like that…people still feel insecure. Because telling us that Windows 8 will have what is essentially a “classic” mode sure makes it sound like today’s skill sets will soon be “classic” too…and then maybe they’ll just become obsolete. Humans find change scary; it’s natural. And when left alone with their fears – because no one is saying anything to dispel them – people can go from frightened to paranoid, and can start to viewing things in a downright conspiratorial light. It would be great if Microsoft stepped into the void now and told us what is coming – especially because whatever they tell us is bound to be at least a little better than what people think they are going to hear. I don’t know what the announcements will be, but I do have it on authority, from a number of sources, that Microsoft isn’t gong to talk until //Build/. That means no news until September September 13th. Nothing until after Labor Day. You get zippo until after the Back-to-School sales are done. What to do? Try not to let the dark voices of gloom and doom fill your head. Even in the absence of answers, we still have some important facts: The .NET developer community is huge. Microsoft’s customers have major investments in .NET, and in .NET skills. Political infighting in Redmond might make for irrational decisions, but ultimately public companies can’t just alienate their advocates and piss off their customers. Spite doesn’t trump fiduciary responsibility. The computing device markets are changing, software is changing, software business models are changing and developers are changing. Microsoft has to keep up. The HTML + JavaScript community is huge too, and it includes many of the “changed” developers. Public companies can’t ignore new markets nor the popular standards that can help them enter those new markets. Loyalty doesn’t trump fiduciary responsibility either. If Microsoft can appeal to new developers, then it should. If Microsoft can keep catering to its existing developers and customers -- not just through legacy support, but also through empowering futures -- then it probably will. You don’t have to shove your old friends out into the rain to make room for new ones; you can bring those new constituents in under a bigger tent. I hope Microsoft will enlarge the tent, and I have trouble imagining why it would not.

Read the article

Content in Context: The right medicine for your business applications

- by Lance Shaw

For many of you, your companies have already invested in a number of applications that are critical to the way your business is run. HR, Payroll, Legal, Accounts Payable, and while they might need an upgrade in some cases, they are all there and handling the lifeblood of your business. But are they really running as efficiently as they could be? For many companies, the answer is no. The problem has to do with the important information caught up within documents and paper. It’s everywhere except where it truly needs to be – readily available right within the context of the application itself. When the right information cannot be easily found, business processes suffer significantly. The importance of this recently struck me when I recently went to meet my new doctor and get a routine physical. Walking into the office lobby, I couldn't help but notice rows and rows of manila folders in racks from floor to ceiling, filled with documents and sensitive, personal information about various patients like myself. As I looked at all that paper and all that history, two things immediately popped into my head. “How do they find anything?” and then the even more alarming, “So much for information security!” It sure looked to me like all those documents could be accessed by anyone with a key to the building. Now the truth is that the offices of many general practitioners look like this all over the United States and the world. But it had me thinking, is the same thing going on in just about any company around the world, involving a wide variety of important business processes? Probably so. Think about all the various processes going on in your company right now. Invoice payments are being processed through Accounts Payable, contracts are being reviewed by Procurement, and Human Resources is reviewing job candidate submissions and doing background checks. All of these processes and many more like them rely on access to forms and documents, whether they are paper or digital. Now consider that it is estimated that employee’s spend nearly 9 hours a week searching for information and not finding it. That is a lot of very well paid employees, spending more than one day per week not doing their regular job while they search for or re-create what already exists. Back in the doctor’s office, I saw this trend exemplified as well. First, I had to fill out a new patient form, even though my previous doctor had transferred my records over months previously. After filling out the form, I was later introduced to my new doctor who then interviewed me and asked me the exact same questions that I had answered on the form. I understand that there is value in the interview process and it was great to meet my new doctor, but this simple process could have been so much more efficient if the information already on file could have been brought directly together with the new patient information I had provided. Instead of having a highly paid medical professional re-enter the same information into the records database, the form I filled out could have been immediately scanned into the system, associated with my previous information, discrepancies identified, and the entire process streamlined significantly. We won’t solve the health records management issues that exist in the United States in this blog post, but this example illustrates how the automation of information capture and classification can eliminate a lot of repetitive and costly human entry and re-creation, even in a simple process like new patient on-boarding. In a similar fashion, by taking a fresh look at the various processes in place today in your organization, you can likely spot points along the way where automating the capture and access to the right information could be significantly improved. As you evaluate how content-process flows through your organization, take a look at how departments and regions share information between the applications they are using. Business applications are often implemented on an individual department basis to solve specific problems but a holistic approach to overall information management is not taken at the same time. The end result over the years is disparate applications with separate information repositories and in many cases these contain duplicate information, or worse, slightly different versions of the same information. This is where Oracle WebCenter Content comes into the story. More and more companies are realizing that they can significantly improve their existing application processes by automating the capture of paper, forms and other content. This makes the right information immediately accessible in the context of the business process and making the same information accessible across departmental systems which has helped many organizations realize significant cost savings. Here on the Oracle WebCenter team, one of our primary goals is to help customers find new ways to be more effective, more cost-efficient and manage information as effectively as possible. We have a series of three webcasts occurring over the next few weeks that are focused on the integration of enterprise content management within the context of business applications. We hope you will join us for one or all three and that you will find them informative. Click here to learn more about these sessions and to register for them. There are many aspects of information management to consider as you look at integrating content management within your business applications. We've barely scratched the surface here but look for upcoming blog posts where we will discuss more specifics on the value of delivering documents, forms and images directly within applications like Oracle E-Business Suite, PeopleSoft Enterprise, JD Edwards Enterprise One, Siebel CRM and many others. What do you think? Are your important business processes as healthy as they can be? Do you have any insights to share on the value of delivering content directly within critical business processes? Please post a comment and let us know the value you have realized, the lessons learned and what specific areas you are interested in.

Read the article

Indexed Drawing in OpenGL not working

- by user2050846

I am trying to render 2 types of primitives- - points ( a Point Cloud ) - triangles ( a Mesh ) I am rendering points simply without any index arrays and they are getting rendered fine. To render the meshes I am using indexed drawing with the face list array having the indices of the vertices to be rendered as Triangles. Vertices and their corresponding vertex colors are stored in their corresponding buffers. But the indexed drawing command do not draw anything. The code is as follows- Main Display Function: void display() { simple->enable(); simple->bindUniform("MV",modelview); simple->bindUniform("P", projection); // rendering Point Cloud glBindVertexArray(vao); // Vertex buffer Point Cloud glBindBuffer(GL_ARRAY_BUFFER,vertexbuffer); glEnableVertexAttribArray(0); glVertexAttribPointer(0,3,GL_FLOAT,GL_FALSE,0,0); // Color Buffer point Cloud glBindBuffer(GL_ARRAY_BUFFER,colorbuffer); glEnableVertexAttribArray(1); glVertexAttribPointer(1,3,GL_FLOAT,GL_FALSE,0,0); // Render Colored Point Cloud //glDrawArrays(GL_POINTS,0,model->vertexCount); glDisableVertexAttribArray(0); glDisableVertexAttribArray(1); // ---------------- END---------------------// //// Floor Rendering glBindBuffer(GL_ARRAY_BUFFER,fl); glEnableVertexAttribArray(0); glEnableVertexAttribArray(1); glVertexAttribPointer(0,3,GL_FLOAT,GL_FALSE,0,0); glVertexAttribPointer(1,4,GL_FLOAT,GL_FALSE,0,(void *)48); glDrawArrays(GL_QUADS,0,4); glDisableVertexAttribArray(0); glDisableVertexAttribArray(1); // -----------------END---------------------// //Rendering the Meshes //////////// PART OF CODE THAT IS NOT DRAWING ANYTHING //////////////////// glBindVertexArray(vid); for(int i=0;i<NUM_MESHES;i++) { glBindBuffer(GL_ARRAY_BUFFER,mVertex[i]); glEnableVertexAttribArray(0); glEnableVertexAttribArray(1); glVertexAttribPointer(0,3,GL_FLOAT,GL_FALSE,0,0); glVertexAttribPointer(1,3,GL_FLOAT,GL_FALSE,0,(void *)(meshes[i]->vertexCount*sizeof(glm::vec3))); //glDrawArrays(GL_TRIANGLES,0,meshes[i]->vertexCount); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER,mFace[i]); //cout<<gluErrorString(glGetError()); glDrawElements(GL_TRIANGLES,meshes[i]->faceCount*3,GL_FLOAT,(void *)0); glDisableVertexAttribArray(0); glDisableVertexAttribArray(1); } glUseProgram(0); glutSwapBuffers(); glutPostRedisplay(); } Point Cloud Buffer Allocation Initialization: void initGLPointCloud() { glGenBuffers(1,&vertexbuffer); glGenBuffers(1,&colorbuffer); glGenBuffers(1,&fl); //Populates the position buffer glBindBuffer(GL_ARRAY_BUFFER,vertexbuffer); glBufferData(GL_ARRAY_BUFFER, model->vertexCount * sizeof (glm::vec3), &model->positions[0], GL_STATIC_DRAW); //Populates the color buffer glBindBuffer(GL_ARRAY_BUFFER, colorbuffer); glBufferData(GL_ARRAY_BUFFER, model->vertexCount * sizeof (glm::vec3), &model->colors[0], GL_STATIC_DRAW); model->FreeMemory(); // To free the not needed memory, as the data has been already // copied on graphic card, and wont be used again. glBindBuffer(GL_ARRAY_BUFFER,0); } Meshes Buffer Initialization: void initGLMeshes(int i) { glBindBuffer(GL_ARRAY_BUFFER,mVertex[i]); glBufferData(GL_ARRAY_BUFFER,meshes[i]->vertexCount*sizeof(glm::vec3)*2,NULL,GL_STATIC_DRAW); glBufferSubData(GL_ARRAY_BUFFER,0,meshes[i]->vertexCount*sizeof(glm::vec3),&meshes[i]->positions[0]); glBufferSubData(GL_ARRAY_BUFFER,meshes[i]->vertexCount*sizeof(glm::vec3),meshes[i]->vertexCount*sizeof(glm::vec3),&meshes[i]->colors[0]); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER,mFace[i]); glBufferData(GL_ELEMENT_ARRAY_BUFFER,meshes[i]->faceCount*sizeof(glm::vec3), &meshes[i]->faces[0],GL_STATIC_DRAW); meshes[i]->FreeMemory(); //glBindBuffer(GL_ELEMENT_ARRAY_BUFFER,0); } Initialize the Rendering, load and create shader and calls the mesh and PCD initializers. void initRender() { simple= new GLSLShader("shaders/simple.vert","shaders/simple.frag"); //Point Cloud //Sets up VAO glGenVertexArrays(1, &vao); glBindVertexArray(vao); initGLPointCloud(); //floorData glBindBuffer(GL_ARRAY_BUFFER, fl); glBufferData(GL_ARRAY_BUFFER, sizeof(floorData), &floorData[0], GL_STATIC_DRAW); glBindBuffer(GL_ARRAY_BUFFER,0); glBindVertexArray(0); //Meshes for(int i=0;i<NUM_MESHES;i++) { if(i==0) // SET up the new vertex array state for indexed Drawing { glGenVertexArrays(1, &vid); glBindVertexArray(vid); glGenBuffers(NUM_MESHES,mVertex); glGenBuffers(NUM_MESHES,mColor); glGenBuffers(NUM_MESHES,mFace); } initGLMeshes(i); } glEnable(GL_DEPTH_TEST); } Any help would be much appreciated, I have been breaking my head on this problem since 3 days, and still it is unsolved.

Read the article

HTML5 Form: Page Is Reloading Instantly After Restyling (And It Shouldn't Be)

- by user3689753

I have a form. I have made it so that if your name is not put in, a red border is put on the name field. That works, BUT...it's for a split second, and then the page reloads. I want the red border to appear, and then stay there. For some reason it's for a split second. Can someone help me make it so the page doesn't reload after displaying the red border? Here's the script. window.onload = function() { document.getElementById("Hogwarts").onsubmit = function () { window.alert("Form submitted. Owl being sent..."); var fname = document.getElementById("fName"); if(!fName.value.match("^[A-Z][A-Za-z]+( [A-Z][A-Za-z]*)*$")) { window.alert("You must enter your name."); addClass(fName, "errorDisp"); document.getElementById("fName").focus(); } else return true; } } function addClass(element, classToAdd) { var currentClassValue = element.className; if (currentClassValue.indexOf(classToAdd) == -1) { if ((currentClassValue == null) || (currentClassValue === "")) { element.className = classToAdd; } else { element.className += " " + classToAdd; } } } function removeClass(element, classToRemove) { var currentClassValue = element.className; if (currentClassValue == classToRemove) { element.className = ""; return; } var classValues = currentClassValue.split(" "); var filteredList = []; for (var i = 0 ; i < classValues.length; i++) { if (classToRemove != classValues[i]) { filteredList.push(classValues[i]); } } element.className = filteredList.join(" "); } Here's the HTML. <!DOCTYPE HTML> <html lang="en"> <head> <meta charset="UTF-8" /> <meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1"> <title>Hogwarts School of Witchcraft And Wizardry Application Form</title> <link rel="stylesheet" type="text/css" href="main.css" media="screen"/> <script src="script.js" type="text/javascript"></script> </head> <body> <section> <header> <h1>Hogwarts School of Witchcraft And Wizardry</h1> <nav></nav> </header> <main> <form method="post" id="Hogwarts"> <!--<form action="showform.php" method="post" id="Hogwarts">--!> <fieldset id="aboutMe"> <legend id="aboutMeLeg">About Me</legend> <div class="fieldleading"> <label for="fName" class="labelstyle">First name:</label> <input type="text" id="fName" name="fName" autofocus maxlength="50" value="" placeholder="First Name" size="30"> <label for="lName" class="labelstyle">Last name:</label> <input type="text" id="lName" name="lName" required maxlength="50" value="" placeholder="Last Name" pattern="^[A-Za-z ]{3,}$" size="30"> <label for="age" class="labelstyle">Age:</label> <input type="number" id="age" name="age" required min="17" step="1" max="59" value="" placeholder="Age"> </div> <div class="fieldleading"> <label for="date" class="labelstyle">Date Of Birth:</label> <input type="date" name="date1" id="date" required autofocus value=""> </div> <div id="whitegender"> <div class="fieldleading"> <label class="labelstyle">Gender:</label> </div> <input type="radio" name="sex" value="male" class="gender" required="required">Male<br/> <input type="radio" name="sex" value="female" class="gender" required="required">Female<br/> <input type="radio" name="sex" value="other" class="gender" required="required">Other </div> </fieldset> <fieldset id="contactInfo"> <legend id="contactInfoLeg">Contact Information</legend> <div class="fieldleading"> <label for="street" class="labelstyle">Street Address:</label> <input type="text" id="street" name="street" required autofocus maxlength="50" value="" placeholder="Street Address" pattern="^[0-9A-Za-z\. ]+{5,}$" size="35"> <label for="city" class="labelstyle">City:</label> <input type="text" id="city" name="city" required autofocus maxlength="30" value="" placeholder="City" pattern="^[A-Za-z ]{3,}$" size="35"> <label for="State" class="labelstyle">State:</label> <select required id="State" name="State" > <option value="Select Your State">Select Your State</option> <option value="Delaware">Delaware</option> <option value="Pennsylvania">Pennsylvania</option> <option value="New Jersey">New Jersey</option> <option value="Georgia">Georgia</option> <option value="Connecticut">Connecticut</option> <option value="Massachusetts">Massachusetts</option> <option value="Maryland">Maryland</option> <option value="New Hampshire">New Hampshire</option> <option value="New York">New York</option> <option value="Virginia">Virginia</option> </select> </div> <div class="fieldleading"> <label for="zip" class="labelstyle">5-Digit Zip Code:</label> <input id="zip" name="zip" required autofocus maxlength="5" value="" placeholder="Your Zip Code" pattern="^\d{5}$"> <label for="usrtel" class="labelstyle">10-Digit Telephone Number:</label> <input type="tel" name="usrtel" id="usrtel" required autofocus value="" placeholder="123-456-7890" pattern="^\d{3}[\-]\d{3}[\-]\d{4}$"> </div> <div class="fieldleading"> <label for="email1" class="labelstyle">Email:</label> <input type="email" name="email1" id="email1" required autofocus value="" placeholder="[email protected]" pattern="^[a-z0-9._%+-]+@[a-z0-9.-]+\.[a-z]{2,4}$" size="35"> <label for="homepage1" class="labelstyle">Home Page:</label> <input type="url" name="homepage1" id="homepage1" required autofocus value="" placeholder="http://www.hp.com" pattern="https?://.+" size="35"> </div> </fieldset> <fieldset id="yourInterests"> <legend id="yourInterestsLeg">Your Interests</legend> <label for="Major" class="labelstyle">Major/Program Choice:</label> <select required id="Major" name="Major" > <option value="">Select Your Major</option> <option value="Magic1">Magic Horticulture</option> <option value="Magic2">Black Magic</option> <option value="White">White Magic</option> <option value="Blue">Blue Magic</option> <option value="Non">Non-Wizardry Studies</option> </select> </fieldset> <button type="submit" value="Submit" class="submitreset">Submit</button> <button type="reset" value="Reset" class="submitreset">Reset</button> </form> </main> <footer> © 2014 Bennett Nestok </footer> </section> </body> </html> Here's the CSS. a:link { text-decoration: none !important; color:black !important; } a:visited { text-decoration: none !important; color:red !important; } a:active { text-decoration: none !important; color:green !important; } a:hover { text-decoration: none !important; color:blue !important; background-color:white !important; } ::-webkit-input-placeholder { color: #ffffff; } /* gray80 */ :-moz-placeholder { color: #ffffff; } /* Firefox 18- (one color)*/ ::-moz-placeholder { color: #ffffff; } /* Firefox 19+ (double colons) */ :-ms-input-placeholder { color: #ffffff; } body { margin: 0px auto; text-align:center; background-color:grey; font-weight:normal; font-size:12px; font-family: verdana; color:black; background-image:url('bgtexture.jpg'); background-repeat:repeat; } footer { text-align:center; margin: 0px auto; bottom:0px; position:absolute; width:100%; color:white; background-color:black; height:20px; padding-top:4px; } h1 { color:white; text-align:center; margin: 0px auto; margin-bottom:50px; width:100%; background-color:black; padding-top: 13px; padding-bottom: 14px; -moz-box-shadow: 0 1px 3px rgba(0,0,0,0.5); -webkit-box-shadow: 0 1px 3px rgba(0,0,0,0.5); text-shadow: 0 -1px 1px rgba(0,0,0,0.25); } button.submitreset { -moz-border-radius: 400px; -webkit-border-radius: 400px; border-radius: 400px; -moz-box-shadow: 0 1px 3px rgba(0,0,0,0.5); -webkit-box-shadow: 0 1px 3px rgba(0,0,0,0.5); text-shadow: 0 -1px 1px rgba(0,0,0,0.25); } .labelstyle { background-color:#a7a7a7; color:black; -moz-border-radius: 400px; -webkit-border-radius: 400px; border-radius: 400px; padding:3px 3px 3px 3px; } #aboutMe, #contactInfo, #yourInterests { margin-bottom:30px; text-align:left !important; padding: 10px 10px 10px 10px; } #Hogwarts { text-align:center; margin:0px auto; width:780px; padding-top: 20px !important; padding-bottom: 20px !important; background: -webkit-linear-gradient(#474747, grey); /* For Safari 5.1 to 6.0 */ background: -o-linear-gradient(#474747, grey); /* For Opera 11.1 to 12.0 */ background: -moz-linear-gradient(#474747, grey); /* For Firefox 3.6 to 15 */ background: linear-gradient(#474747, grey); /* Standard syntax */ border-color:black; border-style: solid; border-width: 2px; -moz-box-shadow: 0 1px 3px rgba(0,0,0,0.5); -webkit-box-shadow: 0 1px 3px rgba(0,0,0,0.5); text-shadow: 0 -1px 1px rgba(0,0,0,0.25); } @media (max-width: 800px){ .labelstyle { display: none; } #Hogwarts { width:300px; } h1 { width:304px; margin-bottom:0px; } .fieldleading { margin-bottom:0px !important; } ::-webkit-input-label { /* WebKit browsers */ color: transparent; } :-moz-label { /* Mozilla Firefox 4 to 18 */ color: transparent; } ::-moz-label { /* Mozilla Firefox 19+ */ color: transparent; } :-ms-input-label { /* Internet Explorer 10+ */ color: transparent; } ::-webkit-input-placeholder { /* WebKit browsers */ color: grey !important; } :-moz-placeholder { /* Mozilla Firefox 4 to 18 */ color: grey !important; } ::-moz-placeholder { /* Mozilla Firefox 19+ */ color: grey !important; } :-ms-input-placeholder { /* Internet Explorer 10+ */ color: grey !important; } #aboutMe, #contactInfo, #yourInterests { margin-bottom:10px; text-align:left !important; padding: 5px 5px 5px 5px; } } br { display: block; line-height: 10px; } .fieldleading { margin-bottom:10px; } legend { color:white; } #whitegender { color:white; } #moreleading { margin-bottom:10px; } /*opera only hack attempt*/ @media not all and (-webkit-min-device-pixel-ratio:0) { .fieldleading { margin-bottom:30px !important; } } .errorDisp { border-color: red; border-style: solid; border-width: 2px; }

Read the article

Increasing efficiency of N-Body gravity simulation

- by Postman

I'm making a space exploration type game, it will have many planets and other objects that will all have realistic gravity. I currently have a system in place that works, but if the number of planets goes above 70, the FPS decreases an practically exponential rates. I'm making it in C# and XNA. My guess is that I should be able to do gravity calculations between 100 objects without this kind of strain, so clearly my method is not as efficient as it should be. I have two files, Gravity.cs and EntityEngine.cs. Gravity manages JUST the gravity calculations, EntityEngine creates an instance of Gravity and runs it, along with other entity related methods. EntityEngine.cs public void Update() { foreach (KeyValuePair<string, Entity> e in Entities) { e.Value.Update(); } gravity.Update(); } (Only relevant piece of code from EntityEngine, self explanatory. When an instance of Gravity is made in entityEngine, it passes itself (this) into it, so that gravity can have access to entityEngine.Entities (a dictionary of all planet objects)) Gravity.cs namespace ExplorationEngine { public class Gravity { private EntityEngine entityEngine; private Vector2 Force; private Vector2 VecForce; private float distance; private float mult; public Gravity(EntityEngine e) { entityEngine = e; } public void Update() { //First loop foreach (KeyValuePair<string, Entity> e in entityEngine.Entities) { //Reset the force vector Force = new Vector2(); //Second loop foreach (KeyValuePair<string, Entity> e2 in entityEngine.Entities) { //Make sure the second value is not the current value from the first loop if (e2.Value != e.Value ) { //Find the distance between the two objects. Because Fg = G * ((M1 * M2) / r^2), using Vector2.Distance() and then squaring it //is pointless and inefficient because distance uses a sqrt, squaring the result simple cancels that sqrt. distance = Vector2.DistanceSquared(e2.Value.Position, e.Value.Position); //This makes sure that two planets do not attract eachother if they are touching, completely unnecessary when I add collision, //For now it just makes it so that the planets are not glitchy, performance is not significantly improved by removing this IF if (Math.Sqrt(distance) > (e.Value.Texture.Width / 2 + e2.Value.Texture.Width / 2)) { //Calculate the magnitude of Fg (I'm using my own gravitational constant (G) for the sake of time (I know it's 1 at the moment, but I've been changing it) mult = 1.0f * ((e.Value.Mass * e2.Value.Mass) / distance); //Calculate the direction of the force, simply subtracting the positions and normalizing works, this fixes diagonal vectors //from having a larger value, and basically makes VecForce a direction. VecForce = e2.Value.Position - e.Value.Position; VecForce.Normalize(); //Add the vector for each planet in the second loop to a force var. Force = Vector2.Add(Force, VecForce * mult); //I have tried Force += VecForce * mult, and have not noticed much of an increase in speed. } } } //Add that force to the first loop's planet's position (later on I'll instead add to acceleration, to account for inertia) e.Value.Position += Force; } } } } I have used various tips (about gravity optimizing, not threading) from THIS question (that I made yesterday). I've made this gravity method (Gravity.Update) as efficient as I know how to make it. This O(N^2) algorithm still seems to be eating up all of my CPU power though. Here is a LINK (google drive, go to File download, keep .Exe with the content folder, you will need XNA Framework 4.0 Redist. if you don't already have it) to the current version of my game. Left click makes a planet, right click removes the last planet. Mouse moves the camera, scroll wheel zooms in and out. Watch the FPS and Planet Count to see what I mean about performance issues past 70 planets. (ALL 70 planets must be moving, I've had 100 stationary planets and only 5 or so moving ones while still having 300 fps, the issue arises when 70+ are moving around) After 70 planets are made, performance tanks exponentially. With < 70 planets, I get 330 fps (I have it capped at 300). At 90 planets, the FPS is about 2, more than that and it sticks around at 0 FPS. Strangely enough, when all planets are stationary, the FPS climbs back up to around 300, but as soon as something moves, it goes right back down to what it was, I have no systems in place to make this happen, it just does. I considered multithreading, but that previous question I asked taught me a thing or two, and I see now that that's not a viable option. I've also thought maybe I could do the calculations on my GPU instead, though I don't think it should be necessary. I also do not know how to do this, it is not a simple concept and I want to avoid it unless someone knows a really noob friendly simple way to do it that will work for an n-body gravity calculation. (I have an NVidia gtx 660) Lastly I've considered using a quadtree type system. (Barnes Hut simulation) I've been told (in the previous question) that this is a good method that is commonly used, and it seems logical and straightforward, however the implementation is way over my head and I haven't found a good tutorial for C# yet that explains it in a way I can understand, or uses code I can eventually figure out. So my question is this: How can I make my gravity method more efficient, allowing me to use more than 100 objects (I can render 1000 planets with constant 300+ FPS without gravity calculations), and if I can't do much to improve performance (including some kind of quadtree system), could I use my GPU to do the calculations?

Read the article

Exiting a reboot loop

- by user12617035

If you're in a situation where the system is panic'ing during boot, you can use # boot net -s to regain control of your system. In my case, I'd added some diagnostic code to a (PCI) driver (that is used to boot the root filesystem). There was a bug in the driver, and each time during boot, the bug occurred, and so caused the system to panic: ... 000000000180b950 genunix:vfs_mountroot+60 (800, 200, 0, 185d400, 1883000, 18aec00) %l0-3: 0000000000001770 0000000000000640 0000000001814000 00000000000008fc %l4-7: 0000000001833c00 00000000018b1000 0000000000000600 0000000000000200 000000000180ba10 genunix:main+98 (18141a0, 1013800, 18362c0, 18ab800, 180e000, 1814000) %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000 %l4-7: 0000000000000001 0000000001074800 0000000000000060 0000000000000000 skipping system dump - no dump device configured rebooting... If you're logged in via the console, you can send a BREAK sequence in order to gain control of the firmware's (OBP's) prompt. Enter Ctrl-Shift-[ in order to get the TELNET prompt. Once telnet has control, enter this: telnet> send brk You'll be presented with OBP's prompt: ok You then enter the following in order to boot into single-user mode via the network: ok boot net -s Note that booting from the network under Solaris will implicitly cause the system to be INSTALLED with whatever software had last been configured to be installed. However, we are using boot net -s as a "handle" with which to get at the Solaris prompt. Once at that prompt, we can perform actions as root that will let us back out our buggy driver (ok... MY buggy driver :-)) ...and replace it with the original, non-buggy driver. Entering the boot command caused the following output, as well as left us at the Solaris prompt (in single-user-mode): Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #53463393. Ethernet address 0:3:ba:2f:c9:61, Host ID: 832fc961. Rebooting with command: boot net -s Boot device: /pci@1f,700000/network@2 File and args: -s 1000 Mbps FDX Link up Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet 4000 1000 Mbps FDX Link up Requesting Internet address for 0:3:ba:2f:c9:61 SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Booting to milestone "milestone/single-user:default". Configuring devices. Using RPC Bootparams for network configuration information. Attempting to configure interface bge0... Configured interface bge0 Requesting System Maintenance Mode SINGLE USER MODE # Our goal is to now move to the directory containing the buggy driver and replace it with the original driver (that we had saved away before ever loading our buggy driver! :-) However, since we booted from the network, the root filesystem ("/") is NOT mounted on one of our local disks. It is mounted on an NFS filesystem exported by our install server. To verify this, enter the following command: # mount | head -1 / on my-server:/export/install/media/s10u2/solarisdvd.s10s_u2dvd/latest/Solaris_10/Tools/Boot remote/read/write/setuid/devices/dev=4ac0001 on Wed Dec 31 16:00:00 1969 As a result, we have to create a temporary mount point and then mount the local disk onto that mount point: # mkdir /tmp/mnt # mount /dev/dsk/c0t0d0s0 /tmp/mnt Note that your system will not necessarily have had its root filesystem on "c0t0d0s0". This is something that you should also have recorded before you ever loaded your.. er... "my" buggy driver! :-) One can find the local disk mounted under the root filesystem by entering: # df -k / Filesystem kbytes used avail capacity Mounted on /dev/dsk/c0t0d0s0 76703839 4035535 71901266 6% / To continue with our example, we can now move to the directory of buggy-driver in order to replace it with the original driver. Note that /tmp/mnt is prefixed to the path of where we'd "normally" find the driver: # cd /tmp/mnt/platform/sun4u/kernel/drv/sparcv9 # ls -l pci\* -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch.aar -rwxr-xr-x 1 root sys 211616 Jun 8 2006 pcisch.orig # cp -p pcisch.orig pcisch We can now synchronize any in-memory filesystem data structures with those on disk... and then reboot. The system will then boot correctly... as expected: # sync;sync # reboot syncing file systems... done Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #xxxxxxxx. Ethernet address 0:3:ba:2f:c9:61, Host ID: yyyyyyyy. Rebooting with command: boot Boot device: /pci@1e,600000/ide@d/disk@0,0:a File and args: SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Hostname: my-host NIS domain name is my-campus.Central.Sun.COM my-host console login: ...so that's how it's done! Of course, the easier way is to never write a buggy-driver... but.. then.. we all "have an eraser on the end of each of our pencils"... don't we ? :-) "...thank you... and good night..."

Read the article

Multi Monitor Setup Problems

- by Shamballa

I have Ubuntu 10.04 LTS - the Lucid Lynx. I have until recently been using a nVida Graphics card (NVIDIA GeForce 9800 GT) with two monitors attached, this all worked fine and dandy. A couple of days ago I bought two new identical LCD monitors for a multi monitor setup and two ATI graphics cards (ATI Sapphire Radeon HD5450). NOTE *All monitors work fine in Windows XP, 2k, Vista and 7 After I had booted into Ubuntu only one display came on, that I kind of expected anyway, then I removed the driver for the nVidia card and downloaded the ATI version which gave me the ATI Catalyst Control Center - in that only two of the displays were showing the third was disabled and showing unknown driver. I enabled the third monitor that stated "Unkown Driver" and had to reboot, upon reboot none of the displays work. I restarted and booted up into recovery mode and from now that is only what I can get into using a failsafe driver. It seems according to the log that a server is already active for Display 0 and I have to remove /tmp/.X0-lock and start again. This is what the log file is saying: Fatal Server Error Server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again. (WW) xf86 closeconsole: KDSETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETSTATE failed: Bad file descriptor ddxSigGiveUp: closing log I have tried looking at my xorg.config file but unfortunately I have not really got a clue as to how it "should" be - I have tried regenerating it using this command from a terminal: sudo dpkg-reconfigure -phigh xserver-xorg but that had no effect so I am currently stuck in failsafe driver mode but two monitors are active but are mirroring each other. I hope that this is not to long - looking back I have been going on a bit! but I am just trying to explain as much as I can... I have asked this on Linuxquestions but nobody seems to know either or at least I have not had any responses. Could some kind soul please help explain what I can do from here? I would be eternally grateful. Chris * Update * Removing xorg.conf does nothing other than allowing me to use only two monitors - using the command: sudo aticonfig --initial generates the xorg.conf file below: but does not work either - I just get two monitors... Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I have tried using this command from a thread on the Ubuntu Forums with a question similar to mine: sudo aticonfig --initial=dual-head --adapter=all Generated xorg.conf file Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-1" Screen "aticonfig-Screen[1]-1" RightOf "aticonfig-Screen[1]-0" EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-1" Driver "fglrx" BusID "PCI:2:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" Monitor "aticonfig-Monitor[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-1" Device "aticonfig-Device[1]-1" Monitor "aticonfig-Monitor[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection This upon reboot renders ALL monitors blank and I have to go into recovery mode and use a failsafe driver. This is so much harder than I thought it would be, I don't think Ubuntu likes ATI for multi (3) monitors or maybe the other way around. Can anyone help still?

Read the article

"Mega Menus" for SEO [duplicate]

- by Thought Space Designs

This question already has an answer here: How do I handle having to many links on a webpage because of my menu 4 answers I'm using the term "Mega Menus" loosely here. I'm redesigning my WordPress site (it's going to be responsive), and as part of the redesign, I was debating incorporating some sort of descriptive menu setup. For example, normal navigation drop down menus come in the form of unordered lists of links like so: <nav> <ul> <li> <a href="#">Link1</a> </li> <li> <a href="#">Link2</a> </li> <li> <a href="#">Link3</a> <ul> <li> <a href="#">Sub Link1</a> </li> <li> <a href="#">Sub Link2</a> </li> <li> <a href="#">Sub Link3</a> </li> </ul> </li> <li> <a href="#">Link4</a> </li> </ul> </nav> What I'm looking to do is build my drop down menus with more information than your standard menu. For example, I have a top level link named "Team", and under that link, I want to make a large drop down that contains head shots, headers (in the form of styled p tags) and brief (<100 words) descriptions of each team member (only 2 currently). I want to accompany this with a "Read More" link that takes you to their actual team page. This is just one example, of course, and the other top level links would also have descriptive drop downs in the same fashion. On mobile, I was planning on hiding the "mega menu", and delivering a standard unordered list of links. Here's what I was thinking for overall structure and syntax: <nav> <ul> <li> <a href="#">Home</a> </li> <li> <a href="#">About</a> </li> <li> <a href="#">Team</a> <ul>  <li class="mega-menu row"> <a class="col-sm-6" href="#"> <div class="row"> <div class="col-sm-4"> <img src="#" alt="Team Member 1" /> </div> <div class="col-sm-8"> <p class="header">Team Member 1</p> <p>Short description goes here.</p> </div> </div> </a> <a class="col-sm-6" href="#">  </a> </li>   <li> <a href="#">Team Member 1</a> </li> <li> <a href="#">Team Member 2</a> </li>  </ul> </li> <li> <a href="#">Contact</a> </li> </ul> </nav> Can anybody think of any potential SEO ramifications of doing this? I'm not going to be loading these menus full of links, so it shouldn't hurt page rank, but what are the effects of having a good bit of text and maybe even forms within nav elements? Is there such a thing as overloading nav with HTML? EDIT: Here's an example of what the menu would look like rendered on desktop. I'm currently hovering the "Team" menu, but you can't see because my mouse went away when I took the screenshot. EDIT 2: This question is not a duplicate. I'm not going to have "too many" links in my menus. I'm wondering how having images and text inside of header navigation will affect my menus. Also, I don't just want "yes, this is bad" answers. Please cite your sources and be specific with reasoning.

Read the article

Solaris ????????????????

- by Homma

???? ???????????? CPU ?????????????????????????????????? OS ??????????????????????????????????????????????CPU ??????????????????? CPU ???????????????????????????????????????????????????????????????????????????? CPU ??????????????????????????????????? CPU ???????????????????????? CPU ????????????????????????? CPU ?????????????????????????????????????????????????????????????????????????????DTrace ????????????????? ?? ????????????????????????????????????????????? CPU ????????????????? # cat prog01.c int main() { while(1) {}; } # gcc prog01.c -o prog01 ?????????????????????pbind ?????????? CPU 1 ??????psradm ????????? CPU 1 ?????????????????????????? CPU 1 ?????????????? # ./prog01 & [1] 3247 # pbind -b 1 3247 process id 3247: was not bound, now 1 # psradm -i 1 # psrinfo 1 1 no-intr since 09/24/2012 05:46:25 ????????? Solaris 10 8/11 ????????? # cat /etc/release Oracle Solaris 10 8/11 s10x_u10wos_17b X86 Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Assembled 23 August 2011 ????????????????????????? DTrace ??????????????(??????)???????????????????????????? preempt ??????????????????? DTrace ????????????????????????????????????????????????????????????????????????????? # dtrace -qn 'BEGIN{ ts = timestamp; } sched:::preempt/pid == $target/ { printf("%d\n",timestamp - ts); ts = timestamp }' -p 3247 ?????????????????????? 200 ????????????????????? # dtrace -qn 'BEGIN{ ts = timestamp; } sched:::preempt/pid == $target/ { printf("%d\n",timestamp - ts); ts = timestamp }' -p 3247 3547836 199976558 200030610 199964001 200001048 199999666 200021432 ???????????? 200 ????? CPU ????????????? CPU ????????????????????? ??????? CPU 1 ????????????? prog01 ?????????????????????????????????? prog01 ?????????????????????????????????????????????????????????? 200 ??????????????? ????????????????????????? ?????????????????????????????? DTrace ????????DTrace ???????????????????????????????????????????????????????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_timeleft); }' -p 3247 ??????????????????????????????? 1/100 ???????? 200 ????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_timeleft); }' -p 3247 20 20 20 20 20 20 ????????? 200 ???????????????????? ???????? 200 ??????????????????????????????????????????????????????????????????????????????? DTrace ???????DTrace ??????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_cpupri); }' -p 3247 ???????????????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((tsproc_t*)curthread->t_cldata)->ts_cpupri); }' -p 3247 0 0 0 0 0 0 ????????????????? 0 ???????? 0 ?????????????????????? dispadmin ???????????????? # dispadmin -c TS -g | head # Time Sharing Dispatcher Configuration RES=1000 # ts_quantum ts_tqexp ts_slpret ts_maxwait ts_lwait PRIORITY LEVEL 200 0 50 0 50 # 0 200 0 50 0 50 # 1 200 0 50 0 50 # 2 200 0 50 0 50 # 3 200 0 50 0 50 # 4 200 0 50 0 50 # 5 ???????PRIORITY LEVEL 0 ???????? ts_quantum ? 200 ??????????? 0 ???? 200 ???????????????????????????(RES ??? 1000 ????ts_quantum ???? 1/1000 ?)? ????????? ????????????????????? mpstat ????????????????????????????icsw ??? 5 ???????????200 ?????????????????????????????????????????????????????? CPU ??? 200 ????????????? # mpstat 1 | egrep '^ 1|csw' CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 347 196 1 42 1 3 0 0 2 9 1 0 90 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 16 0 0 5 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 7 0 0 5 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 8 0 0 5 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 18 1 0 5 0 0 0 0 100 0 0 0 ???????????? Solaris ????????????????????????????????????????????? priocntl ???????????????? 1 ?????????? # priocntl -s -c FX -t 1000 -i pid `pgrep prog01` ??????? mpstat ?????????CPU ??????? 1 ?????????????????????????????????????????????????????????????????????????????????????????????????????????????? # mpstat 1 | egrep '^ 1|csw' CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 346 196 1 42 1 3 0 0 2 9 1 0 90 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 2 0 0 1 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 2 0 0 1 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 13 0 0 2 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 2 0 0 1 0 0 0 0 100 0 0 0 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 1 0 0 0 5 1 0 1 0 0 0 0 100 0 0 0 ????DTrace ????????????????????????????? # dtrace -qn 'sched:::preempt/pid == $target/ { printf("%d\n", ((fxproc_t*)curthread->t_cldata)->fx_timeleft); }' -p `pgrep prog01` 100 100 100 100 100 100 ??? Solaris ???????????????????????????????????????????????????????????????? 200 ???????????????????????????????????????????????? ??????????????????????????????????????????????????????????????? CPU ?????????I/O ?????????????????????????????????????????????????????????? ?????????????????????????? http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/disp/ ????????? ???????????????????

Read the article

Can't change text color in Microsoft Word 2010

- by Wesley

I have Microsoft Office 2010 32-bit running on Windows 7 32-bit. When text is highlighted and a color is selected from the mini-toolbar or the ribbon, the text does not change color. If I change the color for multiple words, and select a different color for each word, the toolbar and ribbon will reflect each of the different colors that I chose, however it is not displayed in the document. So it appears that Word is aware of the text color and not as if it is simply not applying the change. What may be causing this inability to view text colors and how might I fix it? My only troubleshooting attempt so far has been to perform a repair installation of Office. EDIT 1 I created a document, typed a word, selected it and changed the color. I then saved the document as HTML. The text did not change color. This is the HTML in the document: <html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"> <head> <meta http-equiv=Content-Type content="text/html; charset=windows-1252"> <meta name=ProgId content=Word.Document> <meta name=Generator content="Microsoft Word 14"> <meta name=Originator content="Microsoft Word 14"> <link rel=File-List href="Document_1_files/filelist.xml">  <link rel=themeData href="Document_1_files/themedata.thmx"> <link rel=colorSchemeMapping href="Document_1_files/colorschememapping.xml">  <style>  </style>  </head> <body lang=EN-US style='tab-interval:.5in'> <div class=WordSection1> <p class=MsoNormal><o:p> </o:p></p> <p class=MsoNormal><span class=GramE><span style='color:red'>blah</span></span><span style='color:red'><o:p></o:p></span></p> </div> </body> </html> EDIT 2 I recorded a macro and did the following: Typed a word Selected the word Changed the color. Oddly, I had some strange issues while the macro was recorded. I could not select text with my cursor. I had to select the text with control a and then apply the color change. I then couldn't deselect the selected text. Nonetheless, the text showed that it had a different color in the toolbar, but the color did not display in the document. Here's the macro: Sub Change_Text_Color() ' ' Change_Text_Color Macro ' ' Selection.TypeText Text:="Test Text" Selection.WholeStory Selection.WholeStory End Sub EDIT 3 I opened WordPad and created some text and was able to successfully change the color. If I copy and paste the colored text into a Word 2010 document, the color is lost. However, if you place the I-beam in the text and then look at the color selection drop-down menu on the ribbon or mini-toolbar, you can see that the proper color that the text should be in is highlighted. Edit 4 I uninstalled the entire Office 2010 Suite, rebooted and then reinstalled the suite. No change in behavior. Edit 5 Text cannot be colored in Excel either.

Read the article

Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

- by Brian

How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

Read the article

How do I determine if my controller is in IDE or AHCI mode in Linux?

- by philcolbourn

I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

Search Results

Search found 6764 results on 271 pages for 'bryan head'.

Page 248/271 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255 | Next Page >

- by DipeshBhanani

- by Robz / Fervent Coder

- by Richard Lefebvre

- by user276166

- by Chris George

- by KunaalKapoor

- by kellsey.ruppel

- by Divya Malik

- by Steve Tunstall

- by Tim

- by Pinal Dave

- by Greg Jensen

- by Tanu Sood

- by andrewbrust

- by Lance Shaw

- by user2050846

- by user3689753

- by Postman

- by user12617035

- by Shamballa

- by Thought Space Designs

- by Homma

- by Wesley

- by Brian

- by philcolbourn

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255 | Next Page >