Search Results

Search found 8543 results on 342 pages for 'documentation'.

Page 249/342 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

• Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

  - by Tim Visher

  Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

  Read the article

• How to configure postfix for per-sender SASL authentication

  - by Marwan

  I have two gmail accounts, and I want to configure my local postfix server as a client which does SASL authentication with smtp.gmail.com:587 with credentials that depend on the sender address. So, let's say that my gmail accounts are: [email protected] and [email protected]. If I sent a mail with [email protected] in the FROM header field, then postfix should use the credentials: [email protected]:psswd1 to do SASL authentication with gmail SMTP server. Similarly with [email protected], it should use [email protected]:passwd2. Sounds fairly simple. Well, I followed the postfix official documentation at http://www.postfix.org/SASL_README.html, and I ended up with the following relevant configurations: /etc/postfix/main.cf smtp_sasl_auth_enable = yes smtp_sasl_security_options = noanonymous smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sender_dependent_authentication = yes sender_dependent_relayhost_maps = hash:/etc/postfix/sender_relay smtp_tls_security_level = secure smtp_tls_CAfile = /etc/ssl/certs/Equifax_Secure_CA.pem smtp_tls_CApath = /etc/ssl/certs smtp_tls_session_cache_database = btree:/etc/postfix/smtp_scache smtp_tls_session_cache_timeout = 3600s smtp_tls_loglevel = 1 tls_random_source = dev:/dev/urandom relayhost = smtp.gmail.com:587 /etc/postfix/sasl_passwd [email protected] [email protected]:passwd1 [email protected] [email protected]:passwd2 smtp.gmail.com:587 [email protected]:passwd1 /etc/postfix/sender_relay [email protected] smtp.gmail.com:587 [email protected] smtp.gmail.com:587 After I'm done with the configurations I did: $ postmap /etc/postfix/sasl_passwd $ postmap /etc/postfix/sender_relay $ /etc/init.d/postfix restart The problem is that when I send a mail from [email protected], the message ends up in the destination with sender address [email protected] and NOT [email protected], which means that postfix always ignores the per-sender configurations and send the mail using the default credentials (the third line in /etc/postfix/sasl_passwd above). I checked the configurations multiple times and even compared them to those in various blog posts addressing the same issue but found them to be more or less the same as mine. So, can anyone point me in the right direction, in case I'm missing something? Many thanks.

  Read the article

• Dell Management Packs in System Center Operations Manager 2007 R2?

  - by bwerks

  Hey all, I recently set up SCOM in a small business network environment. The root management server is a Dell Poweredge 2950, and I'd like to use SCOM to monitor it using Dell's management packs. I've imported the management packs into the SCOM deployment and followed Dell's installation instructions, but it doesn't seem to be fully working yet. Currently, the Diagram views in the Dell tree (Monitoring tab) seem to show me the server's place in the network topology, so it seems that at least part of it is working. However, none of the reports under "Performance and Power Monitoring Views" provide any information. When clicking on one of them (Power Consumption (Watts), for instance), the display area is blank and there is a tooltip visible that reads "No performance counter is selected. To select a counter, place a check mark in the Show column in legend below." However, in the legend, there's nothing there for me to check. I've installed OpenManage 6.2 on the server as per the Dell documentation, but I don't know what else I could have done that I missed. Does this sound like a familiar problem to anyone?

  Read the article

• How do Opera's keyboard shortcut settings work?

  - by zem

  Firefox 4 beta is starting to freeze up the way Firefox 3 used to on my machine, and I want a browser that'll play gifs at full speed, so on a Mac my only other choice seems to be Opera. There are just two issues I have with it right now: one, the scrolling is weird compared to every other Mac application, but I can get used to that if there's no way to fix it. Two, cmd-1 through cmd-9 activate the "speed dial" bookmarks instead of selecting tabs 1-9, like in Firefox and Chrome. I can disable those shortcuts easily enough, so I don't keep accidentally loading a different page when I instinctively try to do that, but in an ideal world I could remap those commands to do what I want. The keyboard shortcut editor is weird: There seems to be a scrappy little language for associating actions with commands. It has some limited autocompletion when you type stuff in, and I couldn't find a "select specific tab" action, but some of the existing commands are complicated enough that I'd be surprised if there's not a way to do it. Is there documentation for this language anywhere? Clicking "help" just brings me to this page, which is not very helpful.

  Read the article

• Is it possible to play multiple audio streams from one "jukebox" to multiple Airport Express devices?

  - by Alex Reynolds

  I have set up a Mac mini as a jukebox that streams audio to an Airport Express in another room in the house, using the AirPlay/AirTunes feature in iTunes. I control this with the iOS Remote app, and this works great. At the present time, it looks like the Mac mini's copy of iTunes gets taken over by the Remote app, while streaming. If I set up a second Airport Express in room B, is there a way to set it up (as well as the jukebox) so that it can receive and play its own unique music stream ("stream B"), separate from what's going on at the Mac mini, or in room A, which is playing stream A? To accomplish this, I would be happy to buy a copy of Rogue Amoeba's AirFoil if it will allow sending multiple, separate audio streams from one computer to the multiple wireless bridges, while using the Remote app (or a Rogue Amoeba equivalent for iOS). However, it is unclear to me from their site documentation, whether that is possible or not. I'd prefer to give the points to an answer that solves this problem. If you don't know if it can be done, or do not think it can be done, please allow others to answer. I appreciate your help. Thanks for your advice.

  Read the article

• Cygwin vim doesn't load files in runtimepath

  - by durron597

  I created a custom syntax file, and but none of the files in $VIMRUNTIME seem to load. I followed these pieces of the documentation: http://vimdoc.sourceforge.net/htmldoc/filetype.html#new-filetype http://vimdoc.sourceforge.net/htmldoc/syntax.html#mysyntaxfile When I do :echo &runtimepath I get: /home/durron597/.vim,/usr/share/vim/vimfiles,/usr/share/vim/vim73,/usr/share/vim/vimfiles/after,/home/durron597/.vim/after However, if I open a file with vim -D, here's the listed files as I type f: /etc/vimrc /home/durron597/.vimrc /usr/share/vim/vim73/plugin/getscriptPlugin.vim /usr/share/vim/vim73/plugin/gzip.vim /usr/share/vim/vim73/plugin/matchparen.vim /usr/share/vim/vim73/plugin/netrwPlugin.vim /usr/share/vim/vim73/plugin/rrhelper.vim /usr/share/vim/vim73/plugin/spellfile.vim /usr/share/vim/vim73/plugin/tarPlugin.vim /usr/share/vim/vim73/plugin/tohtml.vim /usr/share/vim/vim73/plugin/vimballPlugin.vim /usr/share/vim/vim73/plugin/zipPlugin.vim Here's the output of ls -lR durron597@Durron597 ~/.vim $ ls -lR .: total 0 drwxr-xr-x+ 1 durron597 None 0 Jun 3 11:06 ftdetect drwxr-xr-x+ 1 durron597 None 0 Jun 3 11:06 syntax ./ftdetect: total 1.0K -rw-r--r-- 1 durron597 None 45 Jun 3 11:06 mytype.vim ./syntax: total 4.0K -rw-r--r-- 1 durron597 None 740 Jun 3 11:06 mytype.vim The exact exact paths are: /home/durron597/.vim/ftdetect/mytype.vim /home/durron597/.vim/syntax/mytype.vim Note: the problem is that these files don't seem to be loaded at all, not that these files have internal mistakes Output of :filetype filetype detection:ON plugin:ON indent:OFF Edit 3: No, really, the files are in the right place: $ find /home -name '*.vim' /home/durron597/.vim /home/durron597/.vim/ftdetect/fix.vim /home/durron597/.vim/syntax/fix.vim

  Read the article

• Using the RST3 plugin in the Leo Outliner

  - by T-Boy

  I'm currently trying out the Leo Outliner, and I've heard quite a bit about the RST3 plugin that it has. I'm not planning to use Leo to program just yet -- at this point I'm wondering if it might be useful for generating HTML and PDF documents, as I'm quite currently enamored with RST and how it works. I'm using my Ubuntu Netbook Remix netbook (running 9.10, I believe). I think I've got it down pat, more or less -- I've installed docutils using the Synaptics Package Manager, and I think I've gotten SilverCity installed, as per the requirements -- I've downloaded the archive, and then run "sudo python setup.py install" with no errors. The thing is, I'm not exactly sure how to invoke the rst3 plugin itself. It doesn't appear in the Plugins menu for Leo right now, and the documentation I've managed to source doesn't seem to clearly explain how to use the plugin. Has anyone had any experience in using the rst3 plugin in Leo? It's a little confusing right now, and searches on Google doesn't seem to be helping much any more. I'm using the latest 4.7.1 final version of Leo from the Synaptics Package Manager (was informed that this would have offered the best integration with UNR, so I figured, what the heck). Have I missed out on any steps here, and are there any useful tutorials on how to use the rst3 plugin?

  Read the article

• Converting Lighttpd config to NginX with php-fpm

  - by Le Dude

  Having so much issue with NginX configuration since I'm new with NginX. Been using Lighttpd for quite sometime. Here are the base info. New Machine - CentOS 6.3 64 Bit - NginX 1.2.4-1.e16.ngx - Php-FPM 5.3.18-1.e16.remi Old Machine - CentOS 6.2 64Bit - Lighttpd 1.4.25-3.e16 Original Lighttpd config file: ####################################################################### ## ## /etc/lighttpd/lighttpd.conf ## ## check /etc/lighttpd/conf.d/*.conf for the configuration of modules. ## ####################################################################### ####################################################################### ## ## Some Variable definition which will make chrooting easier. ## ## if you add a variable here. Add the corresponding variable in the ## chroot example aswell. ## var.log_root = "/var/log/lighttpd" var.server_root = "/var/www" var.state_dir = "/var/run" var.home_dir = "/var/lib/lighttpd" var.conf_dir = "/etc/lighttpd" ## ## run the server chrooted. ## ## This requires root permissions during startup. ## ## If you run Chrooted set the the variables to directories relative to ## the chroot dir. ## ## example chroot configuration: ## #var.log_root = "/logs" #var.server_root = "/" #var.state_dir = "/run" #var.home_dir = "/lib/lighttpd" #var.vhosts_dir = "/vhosts" #var.conf_dir = "/etc" # #server.chroot = "/srv/www" ## ## Some additional variables to make the configuration easier ## ## ## Base directory for all virtual hosts ## ## used in: ## conf.d/evhost.conf ## conf.d/simple_vhost.conf ## vhosts.d/vhosts.template ## var.vhosts_dir = server_root + "/vhosts" ## ## Cache for mod_compress ## ## used in: ## conf.d/compress.conf ## var.cache_dir = "/var/cache/lighttpd" ## ## Base directory for sockets. ## ## used in: ## conf.d/fastcgi.conf ## conf.d/scgi.conf ## var.socket_dir = home_dir + "/sockets" ## ####################################################################### ####################################################################### ## ## Load the modules. include "modules.conf" ## ####################################################################### ####################################################################### ## ## Basic Configuration ## --------------------- ## server.port = 80 ## ## Use IPv6? ## #server.use-ipv6 = "enable" ## ## bind to a specific IP ## #server.bind = "localhost" ## ## Run as a different username/groupname. ## This requires root permissions during startup. ## server.username = "lighttpd" server.groupname = "lighttpd" ## ## enable core files. ## #server.core-files = "disable" ## ## Document root ## server.document-root = server_root + "/lighttpd" ## ## The value for the "Server:" response field. ## ## It would be nice to keep it at "lighttpd". ## #server.tag = "lighttpd" ## ## store a pid file ## server.pid-file = state_dir + "/lighttpd.pid" ## ####################################################################### ####################################################################### ## ## Logging Options ## ------------------ ## ## all logging options can be overwritten per vhost. ## ## Path to the error log file ## server.errorlog = log_root + "/error.log" ## ## If you want to log to syslog you have to unset the ## server.errorlog setting and uncomment the next line. ## #server.errorlog-use-syslog = "enable" ## ## Access log config ## include "conf.d/access_log.conf" ## ## The debug options are moved into their own file. ## see conf.d/debug.conf for various options for request debugging. ## include "conf.d/debug.conf" ## ####################################################################### ####################################################################### ## ## Tuning/Performance ## -------------------- ## ## corresponding documentation: ## http://www.lighttpd.net/documentation/performance.html ## ## set the event-handler (read the performance section in the manual) ## ## possible options on linux are: ## ## select ## poll ## linux-sysepoll ## ## linux-sysepoll is recommended on kernel 2.6. ## server.event-handler = "linux-sysepoll" ## ## The basic network interface for all platforms at the syscalls read() ## and write(). Every modern OS provides its own syscall to help network ## servers transfer files as fast as possible ## ## linux-sendfile - is recommended for small files. ## writev - is recommended for sending many large files ## server.network-backend = "linux-sendfile" ## ## As lighttpd is a single-threaded server, its main resource limit is ## the number of file descriptors, which is set to 1024 by default (on ## most systems). ## ## If you are running a high-traffic site you might want to increase this ## limit by setting server.max-fds. ## ## Changing this setting requires root permissions on startup. see ## server.username/server.groupname. ## ## By default lighttpd would not change the operation system default. ## But setting it to 2048 is a better default for busy servers. ## ## With SELinux enabled, this is denied by default and needs to be allowed ## by running the following once : setsebool -P httpd_setrlimit on server.max-fds = 2048 ## ## Stat() call caching. ## ## lighttpd can utilize FAM/Gamin to cache stat call. ## ## possible values are: ## disable, simple or fam. ## server.stat-cache-engine = "simple" ## ## Fine tuning for the request handling ## ## max-connections == max-fds/2 (maybe /3) ## means the other file handles are used for fastcgi/files ## server.max-connections = 1024 ## ## How many seconds to keep a keep-alive connection open, ## until we consider it idle. ## ## Default: 5 ## #server.max-keep-alive-idle = 5 ## ## How many keep-alive requests until closing the connection. ## ## Default: 16 ## #server.max-keep-alive-requests = 18 ## ## Maximum size of a request in kilobytes. ## By default it is unlimited (0). ## ## Uploads to your server cant be larger than this value. ## #server.max-request-size = 0 ## ## Time to read from a socket before we consider it idle. ## ## Default: 60 ## #server.max-read-idle = 60 ## ## Time to write to a socket before we consider it idle. ## ## Default: 360 ## #server.max-write-idle = 360 ## ## Traffic Shaping ## ----------------- ## ## see /usr/share/doc/lighttpd/traffic-shaping.txt ## ## Values are in kilobyte per second. ## ## Keep in mind that a limit below 32kB/s might actually limit the ## traffic to 32kB/s. This is caused by the size of the TCP send ## buffer. ## ## per server: ## #server.kbytes-per-second = 128 ## ## per connection: ## #connection.kbytes-per-second = 32 ## ####################################################################### ####################################################################### ## ## Filename/File handling ## ------------------------ ## ## files to check for if .../ is requested ## index-file.names = ( "index.php", "index.rb", "index.html", ## "index.htm", "default.htm" ) ## index-file.names += ( "index.xhtml", "index.html", "index.htm", "default.htm", "index.php" ) ## ## deny access the file-extensions ## ## ~ is for backupfiles from vi, emacs, joe, ... ## .inc is often used for code includes which should in general not be part ## of the document-root url.access-deny = ( "~", ".inc" ) ## ## disable range requests for pdf files ## workaround for a bug in the Acrobat Reader plugin. ## $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## ## url handling modules (rewrite, redirect) ## #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" ) ## ## both rewrite/redirect support back reference to regex conditional using %n ## #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} ## ## which extensions should not be handle via static-file transfer ## ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi ## static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" ) ## ## error-handler for status 404 ## #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' ## #server.errorfile-prefix = "/srv/www/htdocs/errors/status-" ## ## mimetype mapping ## include "conf.d/mime.conf" ## ## directory listing configuration ## include "conf.d/dirlisting.conf" ## ## Should lighttpd follow symlinks? ## server.follow-symlink = "enable" ## ## force all filenames to be lowercase? ## #server.force-lowercase-filenames = "disable" ## ## defaults to /var/tmp as we assume it is a local harddisk ## server.upload-dirs = ( "/var/tmp" ) ## ####################################################################### ####################################################################### ## ## SSL Support ## ------------- ## ## To enable SSL for the whole server you have to provide a valid ## certificate and have to enable the SSL engine.:: ## ## ssl.engine = "enable" ## ssl.pemfile = "/path/to/server.pem" ## ## The HTTPS protocol does not allow you to use name-based virtual ## hosting with SSL. If you want to run multiple SSL servers with ## one lighttpd instance you must use IP-based virtual hosting: :: ## ## $SERVER["socket"] == "10.0.0.1:443" { ## ssl.engine = "enable" ## ssl.pemfile = "/etc/ssl/private/www.example.com.pem" ## server.name = "www.example.com" ## ## server.document-root = "/srv/www/vhosts/example.com/www/" ## } ## ## If you have a .crt and a .key file, cat them together into a ## single PEM file: ## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \ ## > /etc/ssl/private/lighttpd.pem ## #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" ## ## optionally pass the CA certificate here. ## ## #ssl.ca-file = "" ## ####################################################################### ####################################################################### ## ## custom includes like vhosts. ## #include "conf.d/config.conf" #include_shell "cat /etc/lighttpd/vhosts.d/*.conf" ## ####################################################################### ####################################################################### ### Custom Added by me #url.rewrite-once = (".*\.(js|ico|gif|jpg|png|css|jar|class)$" => "$0", "" => "/index.php") url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) # expire.url = ( "" => "access 1 days" ) include "myvhost-vhosts.conf" ####################################################################### Here is my Vhost file for lighttpd $HTTP["host"] =~ "192.168.8.35$" { server.document-root = "/var/www/lighttpd/qc41022012/public" server.errorlog = "/var/log/lighttpd/error.log" accesslog.filename = "/var/log/lighttpd/access.log" server.error-handler-404 = "/e404.php" } and here is my nginx.conf file user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/testsite/logs/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; # include /etc/nginx/conf.d/*.conf; ## I added this ## include /etc/nginx/sites-available/*; } Here is my NginX Vhost file server { server_name 192.168.8.91; access_log /var/log/nginx/myapps/logs/access.log; error_log /var/log/nginx/myapps/logs/error.log; root /var/www/html/myapps/public; location / { index index.html index.htm index.php; } location = /favicon.ico { return 204; access_log off; log_not_found off; } # location ~ \.php$ { # try_files $uri /index.php; # include /etc/nginx/fastcgi_params; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_param SCRIPT_NAME $fastcgi_script_name; location ~ \.php.*$ { rewrite ^(.*.php)/ $1 last; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_intercept_errors on; # fastcgi_param SCRIPT_FILENAME $document_root/index.php; # fastcgi_param PATH_INFO $uri; # fastcgi_pass 127.0.0.1:9000; # include fastcgi_params; } } We have a custom apps that we created that works great with lighttpd. I went through some headache also when we were trying to figure out how to make it work with lighttpd. this is the line that helps make it work in lighttpd. url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) but I couldn't figure out how to make it works in NginX. The webserver run just fine when we use the phpinfo.php test file. However as soon as I point it to my apps, nothing comes up. Check the error.log file and there's no error. Very mind boggling. I spent over 1 week trying to figure it out with no luck.. Please help?

  Read the article

• SQL Server 2008: Can't connect to remote server via management studio but can telnet in fine

  - by WarpKid

  Hi, I am in the process of trying to configure SQL Server 2008 to accept remote connections. I have been through all the documentation I can find and yet when I attempt to connect through management studio I get an error stating that the server could not be found. Interestingly I can connect through telnet to the remote server via the port that sql server is listening on. In the SQL Server logs I can see the connection attempt. So SQL Server is up and running and listening on the correct port - no firewall blocking it. It would appear that by default SQL Server is listening on port 50314 by default but management studio attempts to connect on port 1433.Weird. Server Management Studio = no dice. Anyone got any ideas? Server is set to allow remote connections - TCP IP is enabled, firewall is off. Thanks UPDATE FOR TO CLEAR THINGS UP A BIT We are seeing the connection attempt when we telnet in on port 50314 in the sql server logs. When we login through management studio we see it attempting connection on port 1433. There is no sign of this connection attempt in the logs.

  Read the article

• JBossMQ - Clustered Queues/NameNotFoundException: QueueConnectionFactory error

  - by mfarver

  I am trying to get an application working on a JBoss Cluster. It uses Queues internally, and the developer claims that it should work correctly in a clustered environment. I have jbossmq setup as a ha-singleton on the cluster. The application works correctly on whichever node currently is running the queue, but fails on the other nodes with a: "javax.naming.NameNotFoundException: QueueConnectionFactory not bound" error. I can look at JNDIview from the jmx-console and see that indeed the QueueConnectionFactory class only appears on the primary node in the Global context. Is there a way to see the Cluster's JNDI listing instead of each server? The steps I took from a default Jboss 4.2.3.GA installation were to use the "all" configuration. Then removed /server/all/deploy/hsqldb-ds.xml and /deploy-hasingleton/jms/hsqldb-jdbc2-service.xml, copying the example/jms/mysq-jdbc2-service.xml file into its place (editing that file to use DefaultDS instead of MySqlDS). Finally I created a mysql-ds.xml file in the deploy directory pointing "DefaultDS" at an empty database. I created a -services.xml file in the deploy directory with the queue definition. like the one below: <server> <mbean code="org.jboss.mq.server.jmx.Queue" name="jboss.mq.destination:service=Queue,name=myfirstqueue"> <depends optional-attribute-name="DestinationManager"> jboss.mq:service=DestinationManager </depends> </mbean> </server> All of the other cluster features of working, the servers list each other in the view, and sessions are replicating back and forth. The JBoss documentation is somewhat light in this area, is there another setting I might have missed? Or is this likely to be a code issue (is there different code to do a JNDI lookup in a clusted environment?) Thanks

  Read the article

• Installing Munin on Centos 6

  - by justinhj

  I've hit problems installing munin on Centos 6. This seems to be a conflict between parts of Perl. I think the version of Perl is newer on Centos 6 (v5.10.1) When installing munin via yum I get errors relating to perl dependencies as below. I'm not a big enough whiz at yum or rpm to figure out the issue. Munin documentation does not yet talk about installing to Centos 6.0 Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(Net::SNMP) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: bitstream-vera-fonts Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(HTML::Template) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-SNMP Error: Package: munin-common-1.4.2-0.rpl1.el5.noarch (/munin-common-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(DBI) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Log::Log4perl) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(LWP::Simple) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(RRDs) Error: Package: munin-node-1.4.2-0.rpl1.el5.noarch (/munin-node-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-Server Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Date::Manip) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(:MODULE_COMPAT_5.8.8) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl-Net-Server Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(CGI::Fast) Error: Package: munin-1.4.2-0.rpl1.el5.noarch (/munin-1.4.2-0.rpl1.el5.noarch) Requires: perl(Time::HiRes)

  Read the article

• Passenger error: No such file or directory - config/environment.rb

  - by JJD

  I installed Redmine on MacOSX Server 10.6.8 according to this installation description. So far everything works fine: When I start webrick the server serves the Redmine pages. The gems and redmine are installed under the user "redmine". After that I aimed configuring apache2 with passenger as described here. As suggested by the description I also installed the passenger-pane which stores its virtual host configuration files in /private/etc/apache2/passenger_pane_vhosts. This is what I came up with after a lot of manual try and error. At least, now I can reach a passenger error page. // redmine.vhost.conf <VirtualHost *:80> ServerName host ServerAlias localhost DocumentRoot "/Users/redmine/Sites/redmine" # RackEnv production # RackBaseURI / RailsEnv production RailsBaseURI / # PassengerUser www-data # PassengerGroup www-data <Directory "/Users/redmine/Sites/redmine"> Order allow,deny Allow from all </Directory> </VirtualHost> However, the passenger module still runs into the following errors. Error message: No such file or directory - config/environment.rb The /var/log/apache2/error_log of the web server stated the following. [warn] NameVirtualHost *:80 has no VirtualHosts [notice] Apache/2.2.21 (Unix) Phusion_Passenger/3.0.12 configured -- resuming normal operations [ pid=21824 thr=2151905620 file=utils.rb:176 time=2012-06-01 18:22:07.126 ]: *** Exception Errno::ENOENT in PhusionPassenger::ClassicRails::ApplicationSpawner (No such file or directory - config/environment.rb) (process 21824, thread #<Thread:0x0000010086f2a8>): I experimented with the user switch functionality of passenger as described in the documentation - as you can tell from my configuration file. Though, I was not successful.

  Read the article

• Have powershell zip the contents of a bunch of folders, individual zip for each folder

  - by WebDevHobo

  Recently, I asked how to do this with a .bat file and an answer was provided. for /D %%d in (*.*) do "C:\Program Files\7-Zip\7z\7za.exe" a -tzip %%d.zip %%d However, this proved useful only for folders that have no spaces in their name. The reason being that batch will do the following: if the folder name is "jef's vacation pics", the variables will be: %%d = jef's %%e = vacation %%f = pics And then it tries to pass only %%d to the 7-zip program, which will not find such a folder and therefor will not create a zip file. I've tried looking up some tutorials, documentation sites and such, but I haven't been able to come up with an answer. There may be an answer, but I want to take this opportunity to try my hand at powershell. I was thinking that a function with 1 argument, that being the parent-folder of the sub-folders that need to be zipped, would be the best approach. So here's what I have, which doesn't work, probably due to my general in-experience with powershell: function zipFolders($parent) { $zip = "C:\Program Files\7-Zip\7z\7za.exe"; $parents | ForEach-Object $zip a -tzip }

  Read the article

• Scheduled tasks fail to start unless I'm logged in to the server

  - by Chuck

  Tasks need to open a CMD window and pass net use commands, then do a DIR command, pipping the output to a file on the server. Log in as either me (Sysadmin) or with one of the system accounts and task will only run if I'm physically logged into the server. Run as batch file is set in security properties for both users (me and service account), security is granted to all directories, etc. It almost acts like a scheduled task, since it is not physically connected to a display can't create a CMD window and pass the WinID so the command can be sent. I'm guessing. Anyone know of a document that explains how the server handles initiation of a window if done via scheduled task and no attached user is associated with the task? If I log onto the box and run the scheduled tasks they run fine, but produce no errors or event log entries and then just show that it ran successfully and sets the next run time. Have tried both with the run if logged in checkbox on and off and makes no difference. Other tasks work fine, except that they are acting on local drives with no display writing or updating taking place, so I'm guessing the system either can't instantiate a window if no display is connected to a logged on user, or it can't establish a point if it is trying to create a virtual screen. You'd think it is just creating a memory map and then mapping it to a device to display, but that doesn't seem to be the case, but I can find no documentation on how the system handles a scheduled task and how to invoke a fake or virtual screen that it could write to so it appears that a user was connected. Thanks This is driving me nuts and I've tried everything I can think of as well as our network boys ideas and nothing seems to work.

  Read the article

• red5 Install on Ubuntu 10.04? Problems with libslf4j

  - by mrgordon

  I've been trying for many days to get Red5 to install on Ubuntu 10.04. I finally managed to get red5.sh to stop hanging a few seconds in but now I'm getting the following error: Setting default logging context: default Exception in thread "main" java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.red5.server.Bootstrap.bootStrap(Bootstrap.java:135) at org.red5.server.Bootstrap.main(Bootstrap.java:50) Caused by: java.lang.NoSuchMethodError: org.slf4j.impl.StaticLoggerBinder.getContextSelector()Lch/qos/logback/classic/selector/ContextSelector; at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:121) at org.red5.logging.Red5LoggerFactory.getLogger(Red5LoggerFactory.java:108) at org.red5.server.Launcher.launch(Launcher.java:51) ... 6 more I suspected that this had to do with slf4j not being installed or on my classpath. I installed logback and libslf4j-java from aptitude and I see related files in my red5 lib directories. For example: /usr/share/red5/lib/slf4j-api-1.6.1.jar /usr/share/red5/lib/log4j-over-slf4j-1.6.1.jar /usr/share/red5/lib/logback-classic-0.9.26.jar /usr/share/red5/lib/logback-core-0.9.26.jar /usr/share/red5/lib/jcl-over-slf4j-1.6.1.jar /usr/share/red5/lib/jul-to-slf4j-1.6.1.jar And I set my classpath to /usr/share/red5/lib/ Any ideas on where to proceed from here? There seem to be a lot of people having trouble getting 10.04 and red5 0.9 working together. I've tried red5-0.9.1.tar.gz and red5_0.9.0-RC1_all.deb. The libraries above should be all that are needed according to Red5's documentation and I got the latest version of each.

  Read the article

• Why the system information message when accessing an Ubuntu server doesn't match free -m?

  - by Andres

  Each time I SSH into my AWS Ubuntu servers I see a system information message, showing load, memory usage and packages available to install, like this: Welcome to Ubuntu 12.04.3 LTS (GNU/Linux 3.2.0-51-virtual x86_64) * Documentation: https://help.ubuntu.com/ System information as of Sun Nov 10 18:06:43 EST 2013 System load: 0.08 Processes: 127 Usage of /: 4.9% of 98.43GB Users logged in: 1 Memory usage: 69% IP address for eth0: 10.236.136.233 Swap usage: 100% Graph this data and manage this system at https://landscape.canonical.com/ 13 packages can be updated. 0 updates are security updates. Get cloud support with Ubuntu Advantage Cloud Guest http://www.ubuntu.com/business/services/cloud Use Juju to deploy your cloud instances and workloads. https://juju.ubuntu.com/#cloud-precise *** /dev/xvda1 will be checked for errors at next reboot *** *** System restart required *** My question is about the memory percentage shown. In this case, it's showing a 69% of memory usage, but since the swap usage was 100% I checked it by myself. So when I run free -m I get this: total used free shared buffers cached Mem: 1652 1635 17 0 4 29 -/+ buffers/cache: 1601 51 Swap: 895 895 0 And that's of course closer to 100% than to 69%

  Read the article

• How can I filter /var/adm/wtmpx on Solaris 10?

  - by Yanick Girouard

  Some of our Solaris 10 servers are monitored using SiteScope, which uses Telnet to probe certain ports (SSH is one of them) every few minutes. This is creating an insane amount of lines in /var/adm/wtmpx, and eventually make it so big (2,5G+) that we can no longer run the last command, or that the uptime command is unable to accurately show the true uptime of the server. The error we get when trying to run the last command is this: /var/adm/wtmpx: Value too large for defined data type I have found ways we can clean this accounting log using a cron job (with the command /usr/lib/acct/fwtmp), and this works. This is not the issue. I was wondering if there would be a way to simply prevent connections from the monitoring user (in our case, user monsite) from creating entries in this accounting log at all. Is this possible, and if so, how can I do it? I've looked around and searched Google for a while, but couldn't find an answer to this question. NOTE: We are very well aware that the monitoring solution we employ is perhaps not the best one, but we cannot change it at this time. Therefore, suggesting that we change it is not pertinent to this question. If you want to read more on the Sitescope monitoring solution we employ for those servers, please see its documentation here and look for Port Monitor, and Connecting to remote UNIX servers, which explains how it works.

  Read the article

• can't find port 22 traffic under VirtualBox

  - by telliott99

  I'm trying to learn to use tcpdump. I thought I'd eavesdrop on my ssh login. The setup is a bit unusual, I have OS X Lion running VirtualBox, with Ubuntu running in the VM. I have ssh enabled and can login from OS X normally: > ssh -p 22 10.0.1.2 -l telliott Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-17-generic i686) * Documentation: https://help.ubuntu.com/ 0 packages can be updated. 0 updates are security updates. Last login: Sat Mar 31 19:54:36 2012 from toms-mac-mini.local telliott@U32:~$ logout Connection to 10.0.1.2 closed. > I have not obfuscated the ssh port on Ubuntu. From OS X, stroke gives what I expect: > ./stroke 10.0.1.2 22 22 Port Scanning host: 10.0.1.2 Open TCP Port: 22 ssh So from OS X I do: > sudo tcpdump -i en1 -v port 22 Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes Then I login from OS X to Ubuntu using ssh, but I see nothing with tcpdump. Here is ifconfig from Ubuntu: telliott@U32:~$ ifconfig eth1 Link encap:Ethernet HWaddr 08:00:27:d7:ba:0e inet addr:10.0.1.2 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fed7:ba0e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:799 errors:0 dropped:0 overruns:0 frame:0 TX packets:465 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:96863 (96.8 KB) TX bytes:68638 (68.6 KB) Where are the packets I was hoping to see? Thanks for any help.

  Read the article

• Setting Ubuntu Global PATH for Ruby Enterprise Edition

  - by Wally Glutton

  Context: I recently installed Ruby Enterprise Edition (REE) on an Ubuntu 8.04 server. I would like for this new version of Ruby to globally supersede (for all users, crontabs, etc) the older version in /usr/local/bin. Attempted Solution #1: The REE documentation recommends placing the REE bin folder at the beginning of the global PATH in /etc/environment. I altered the PATH line in this file to read: PATH="/opt/ruby_ee/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" This did affect my PATH at all. Attempted Solution #2: Next I followed these instructions and updated the PATH setting in the /etc/login.defs and /etc/crontab files. (I did not change /etc/sudoers.) This didn't affect my PATH either, even after logging out and rebooting the server. Other information: I seem to be having the same problem described here. I'm testing using the command: echo $PATH My shell is bash. My .bashrc doesn't not alter my PATH. I'm ssh'ed into the system for all testing. /opt/ruby_ee/ is a sym-link to /opt/ruby-enterprise-1.8.7-2011.03/

  Read the article

• Getting AWStats to work in Ubuntu 12.04

  - by koogee

  I'm new to apache and i'm trying to set up AWStats on my ubuntu 12.04 server. I've followed the guide at Ubuntu docs https://help.ubuntu.com/community/AWStats I set it up according to the instructions and awstats is able to generate initial stats from apache log successfully. I placed the links to awstats in the default virtual host file. However when I try to run http://server-ip-address:8080/awstats/awstats.pl, I get: Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats. Setup ('/etc/awstats/awstats.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). Here is my /etc/apache2/sites-available/default file: <VirtualHost *:8080> ServerAdmin webmaster@localhost DocumentRoot /home/saad/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/saad/www/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /awstatsclasses "/usr/share/awstats/lib/" Alias /awstats-icon "/usr/share/awstats/icon/" Alias /awstatscss "/usr/share/doc/awstats/examples/css" ScriptAlias /awstats/ /usr/lib/cgi-bin/ Options ExecCGI -MultiViews +SymLinksIfOwnerMatch ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> The only three variables I edited in /etc/awstats/awstats.conf are: LogFile="/var/log/apache2/access.log" SiteDomain="server-name.noip.org" HostAliases="localhost 127.0.0.1 server-name.no-ip.org" The apache server works fine and i'm able to access other pages stored on the server. Any guidance would be welcome.

  Read the article

• PBS batch jobs - the qalter command

  - by Ryan Budney

  I've got a giant computation running on a Scientific Linux cluster. At present I have over 600 jobs parked in the queue, waiting for processor time, while a few are running. I'm trying to use the qalter command on some of the idle but scheduled jobs. I'd like to schedule them for a later time, so that other users can jump part of the queue, sort of as an act of politeness. Is this doable? For example, JOBNAME 292399 is currently idle, scheduled to be run whenever a spot in the queue opens up. But if I run qalter -a 10051000 292398 followed by qrerun 292398 I get qrerun: Request invalid for state of job 292398.euler. From the qalter documentation, I thought 10051000 refers to tomorrow (oct 5th, 10am) but perhaps I'm misunderstanding something? If I'm going about this the wrong way, please let me know. The main thing I'm looking for is a command that's easily scriptable, so that I can modify when my queued tasks get run. qalter seems good for those purposes if I can get it working. I'd rather avoid running qdel and re qsubbing the computations, as there's a bookkeeping issue on which tasks to restart (vs which ones not to). I want to avoid that kind of bookkeeping. From googling around I notice some qalter commands have rather different date formats, but the above appears to be correct, as far as I can tell from the man docs. Any help would be appreciated.

  Read the article

• Running Mathematica-5 remotely

  - by oxinabox.ucc.asn.au

  I have Mathematica 5 - a powerful CAS. I have a cheap netbook (running Windows XP), wich not only is too slow to run mathmatica on, I doubt it has the harddrive space. I do however have remote access to a number of very powerful computers, (most of wich run variose Linuxes, but one of which is Windows Server 2008, though I'ld rather not use this one*). Mostly over SSH but other protocols can be arraged for some, I'm sure. So I'ld like to install Mathematica onto one of these machine and then run it remotely. Either from the command line via Putty or via some other method. I glanced through the mathematical documentation and read something about using some MathLink program, which links the front end installed on my computer to a remote kernel. Anyone have any experience with this? I'm not sure if this belongs here or in SuperUser. At the moment, it's being tinkered with, and when the tinkering stops it'll likely be used to run multiple thin terms. As compared to the Linux machines: I have access to a dual 2.4 Xeon with 3GB RAM, which the rest of the world seems to have completely forgotten about (runs freeBSD!).

  Read the article

• Network monitoring tools with API features

  - by Kev

  We use ks-soft's Advanced Hostmonitor package to monitor around 2000 items on our network. We think it's great, the chap that supports it is fantastic, the product is fast, stable and mature but I feel as as we grow as a company it's beginning to show some friction points in the area of integration with our back office admin systems. One of the things we'd like to do is be able to add new tests to whatever monitoring tool we use via an API. For example, when orders for servers come from our retail interface, the server gets built automatically, and as part of the automated build process we'd like to automatically add new tests to the network monitoring systems. Hostmonitor has some support for this via a feature called HM Script but we're starting to encounter some speedbumps - we can't add new operators/users we can't define new "Action Profiles" - these are the actions to be taken when a test goes good or bad. What we love about hostmonitor though are the Action Profiles. For example if a Windows IIS box goes bad our action profile for a bad test does something like: Check host again (one time) Wait another 30 seconds then test again Try restart app pool on remote machine (up to two times) Send an email to ops about the restart failure Try restarting IIS on remote machine (up to four times) Page duty admin (up to 5 times - stops after duty admin ACKS alert) Page backup duty admin (5 times - stops after duty admin ACKS alert) I'm starting to look around at other network monitoring tools and I'm looking for: a comprehensive API to be able to add/remove/control tests/test "action profiles"/operators (not just plugins, we need control and admin interfaces) the ability to have quite detailed action/escalation profiles (and define these via an API) I've looked at Nagios and Icinga but Ican't seem to glean from their documentation whether we could have these features or not, or if we could, how much work would be involved to implement/customise. Can anyone provide any advice, guidance or experiences?

  Read the article

• How do I effectively use WinSCP on my GoDaddy Dedicated Hosting

  - by Scott

  After being told that Virtual Private Servers would not fit the scope of my project, I have timidly entered the world of dedicated hosting. Unfortunately, this is forcing me how to learn the basics of being a Linux server admin. GoDaddy has a master account for the server. When you use SSH, they want you to use "su" to switch to the root user. Thus far, I have been able to do everything I have needed to thus far via the command line as this root user. However, now I need to upload files to my server. I'm used to using WinSCP to upload files. I can use my general server account to view the files but when I try to drag or create files its says that I cannot because I do not have permission to do so. I have researched the WinSCP documentation and it seems that this "su" function is beyond the scope of the program. How am I to grant myself access to upload these files using SSH? Should I create a user with the proper permissions? I'm happy to do this but thus far I have not been able to make sense of what I have found online. I'm going to try and move forward but any help and/or insight is appreciated.

  Read the article

• Bacula v5.0.2 Windows Installation Issues

  - by JohnyD

  First off, I am very new to Bacula but I'm very intriqued from what I've read. I'm looking to set up Bacula 5.0.2 on a Windows 2008 R2 server. I've run the installer and at the end it asks me to configure DIR name, DIR password, DIR Address. Windows documentation is somewhat hard to come by and I'm not certain what exactly I'm supposed to enter here. Do I need to create a local account that matches this info? Will the installation process create the account for me? Will this be the account that handles the FD daemon/service? I'm also not certain if Address means network location or local direcory. I apologize for my ignorance. Currently I'm trying to use the following information: Name: john pass: john address: thin1 (server name although I have also tried thin1.fqdm.local and 10.0.0.104) This info allows for the installer to complete successfully. However, when I run the BAT it hangs at, "Connecting to Director thin1:9101". The Bacula File Service is currently running under the local system account. What am I doing wrong? What do I have yet to do? Once I get this working properly I assume I will need to install clients on all my Windows boxes? Also, this is a 64-bit cpu but I am installing the 32-bit client. Are there any issues with this? Should I be using the 32-bit client? Thanks very much for the help.

  Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >