Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 249/789 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

• How do I troubleshoot an IPsec tunnel (from a cellular router to a public server)?

  - by Hanno Fietz

  I'm new to IPsec and struggling with a setup that might soon be widely used in our operations (provided I do understand it, eventually...). A cellular router (blackbox by netModule, from its log messages it seems to be running Linux and OpenSwan) connects a sensor network on customers' sites with our public server. We need to be able to connect into the local network, so I had the cell provider give me a public IP (a dynamic one). The way their setup works, the public IPs only allow IPsec traffic. I set up OpenSwan on our Ubuntu server (running Jaunty). This is my connection config from /etc/ipsec.conf: conn gprs-field-devices left=my.pub.lic.ip [email protected] #leftsubnet=192.168.1.129/25 right=%any [email protected] #rightsubnet=192.168.1.1/25 #rightnexthop=%defaultroute auto=add On the router, all I have is the Web UI, in which I made the following settings: "Remote endpoint": public IP of server, same as "left" above "Local Network Address": 192.168.1.1 "Local Network Mask": 255.255.255.128 "Remote Network Address": 192.168.1.129 "Remote Network Mask": 255.255.255.128 The pluto process on the server is listening for connections on port 500. It can't open a tunnel, obviously, because it doesn't know at which IP the client is. I set up a passphrase as PSK for @field.econemon.com in /etc/ipsec.secrets and also configured it in the router (which doesn't seem to support certificates). My problem is, nothing happens. The router just says, IPsec is "down". When I copy-paste the IP into ipsec.conf (for "right="), and ask the server to ipsec auto --up gprs-field-devices, it just hangs until I press Ctrl-C. Is there anything wrong with my setup? How can I debug this further? My router gives the following loglines that seem related, but don't tell me anything: Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/hostkey.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/netbox0.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: "netbox00" #1: initiating Main Mode Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: 104 "netbox00" #1: STATE_MAIN_I1: initiate Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: ...could not start conn "netbox00" Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: received and ignored informational message Feb 21 23:08:28 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 0 seconds Feb 21 23:08:40 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 10 seconds Feb 21 23:08:52 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN

  Read the article

• Cannot connect to WEBrick on home network

  - by Chris Stewart

  I'm an Android developer and often my applications require server-side code. I typically use Ruby on Rails for the web app, and during development will run the server on my local machine (Mac OS X) with WEBrick. In the morning when I get to the office, I'll run ifconfig in the console to see what IP my laptop has been given that day. I'll use that IP in my Android app when making requests to the web app in question. This all works fine, when I'm in my office. When I get home, I attempt to do the same thing, find my laptop's IP via ifconfig, set it in my app's config file, but the destination can never be found. To exclude my app from the set of hurdles, I attempt to visit the web server IP (e.g., http://192.168.1.4:3000) from my phone's browser, and it cannot connect. If I try from my laptop, which is running the web server, it works fine. If I try from another machine, on the same network, it also is unable to connect. Given this, I think I've narrowed it down to some kind of configuration in my home network, but I frankly have no idea what the cause could be. I don't have anything special at home, your basic Verizon FiOS router/modem with everything connected via Wi-Fi (Wi-Fi for both phone and laptop at work as well, fyi). I've tried disabling the firewall on my Verizon router, enabling port forwarding, and just about everything else I could do for port 3000, and nothing has changed. Dear Server Fault geniuses, please help a poor developer out. :) Edit: Some follow up items to add. My Mac's firewall is not active, and all incoming requests are allowed. I've also verified on my phone and laptop, that they're on the same network (192.168.1.4 Mac, 192.168.1.9 Phone). I have no idea why this isn't working. Edit 2: I went into System Preferences, enabled Web Sharing, and tried to view the website from my phone and it didn't connect. So it's not WEBrick or related to Rails. The firewall on my machine is off and the firewall on my router is off. Edit 3: Some progress. I set up port forwarding for port 3000 to my laptop, found the external IP, and used that and it connected fine. So, there's definitely something not quite set up correctly on my internal network.

  Read the article

• VirtualDesktop &amp; Multi-monitor simplification and merging

  <b>Rms-Mit:</b> "I believe that Virtual Desktops and multi-monitor controls can be merged to make both more flexible and easy to use. I also believe that merging these concepts will simplify the virtual desktop & multi-monitor concepts."

  Read the article

• OT: Improbable use for an iPad?

  - by merrillaldrich

  Here's an interesting tidbit: I have noticed an even more pronounced trend toward centralized or virtual workstations lately. Both my wife and I can sit at home, as we are now, at the dining room table and work on our laptops (exciting life, I know!) but both of us are not actually working locally on these machines. We are both remoting into machines at our respective workplaces. Hers is a desktop machine physically located at her desk, while mine is a virtual workstation in my company's data center...(read more)

  Read the article

• Screencast Identity Management Pack for Grid Control 11g

  - by mark.wilcox

  Got a happy surprise in my inbox today. The Grid Control team has produced a screencast showing the features of the Identity Management Pack for Grid Control 11g. Grid Control 11g now works with Oracle Virtual Directory 11g. -- Posted via email from Virtual Identity Dialogue

  Read the article

• Google analytics is counting way to much

  - by Luticka

  I have a website using Google analytics but it is counting way to much. To test this i was logging all entry's to my database with time and IP address. My result for one day was: Google analytics: Visits: 4078 Absolute Unique Visitors: 3758 My Database: Visits: 4182 Unique Visitors(Only by IP): 905 I use the tracking option "One domain with multiple subdomains" because the website is accessible both on www.example.com and example.com. I'm i missing something or what could be wrong?

  Read the article

• Is this distributed database server idea feasible?

  - by David

  I often use SQLite for creating simple programs in companies. The database is placed on a file server. This works fine as long as there are not more than about 50 users working towards the database concurrently (though depending on whether it is reads or writes). Once there are more than this, they will notice a slowdown if there are a lot of concurrent writing on the server as lots of time is spent on locks, and there is nothing like a cache as there is no database server. The advantage of not needing a database server is that the time to set up something like a company Wiki or similar can be reduced from several months to just days. It often takes several months because some IT-department needs to order the server and it needs to conform with the company policies and security rules and it needs to be placed on the outsourced server hosting facility, which screws up and places it in the wrong localtion etc. etc. Therefore, I thought of an idea to create a distributed database server. The process would be as follows: A user on a company computer edits something on a Wiki page (which uses this database as its backend), to do this he reads a file on the local harddisk stating the ip-address of the last desktop computer to be a database server. He then tries to contact this computer directly via TCP/IP. If it does not answer, then he will read a file on the file server stating the ip-address of the last desktop computer to be a database server. If this server does not answer either, his own desktop computer will become the database server and register its ip-address in the same file. The SQL update statement can then be executed, and other desktop computers can connect to his directly. The point with this architecture is that, the higher load, the better it will function, as each desktop computer will always know the ip-address of the database server. Also, using this setup, I believe that a database placed on a fileserver could serve hundreds of desktop computers instead of the current 50 or so. I also do not believe that the load on the single desktop computer, which has become database server will ever be noticable, as there will be no hard disk operations on this desktop, only on the file server. Is this idea feasible? Does it already exist? What kind of database could support such an architecture?

  Read the article

• Új dimenzió middleware (Java) virtualizáció területén

  - by peter.nagy

  Korábban már írtam róla, de most megtörtént a hivatalos bejelentés. Tehát elérheto lesz a JRockit Virtual Edition ami várhatóan új mértéket teremt middleware területen. Továbbá megjelent a Virtual Assembly Builder mely a rohamosan terjedo virtualizációs környezetben használt konfiguráció menedzsmentjét támogatja hatékonyan. A termék elso nyilvános webcast-jára pedig itt tessék regisztrálni.

  Read the article

• XSIGO Product Training Now Available

  - by Cinzia Mascanzoni

  Xsigo Sales and Pre-Sales training is available via iLearning for partners registered in OPN Server and Storage Systems Knowledge Zones. The recommended online training sessions provide sales training solutions that equip partners with the product knowledge, market knowledge and selling strategies to help achieve their revenue targets. Partners are invited to learn more here: Sales Training: Product Essentials For Sales - Oracle Virtual Networking Pre-Sales Training and Product Essentials For Sales Consultants - Oracle Virtual Networking.

  Read the article

• Ubuntu and Postfix Configuration Issues

  - by Obi Hill

  I recently installed postfix on Ubuntu Natty. I'm having a problem with the configuration. Firstly here is my postfix configuration file: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. mydomain = $myorigin myhostname = mail.nairanode.com alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 mydestination = $myorigin, $myhostname, localhost.localdomain, , localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #mynetworks_style = host # ADDITIONAL unknown_local_recipient_reject_code = 550 maximal_queue_lifetime = 7d minimal_backoff_time = 1000s maximal_backoff_time = 8000s smtp_helo_timeout = 60s smtpd_recipient_limit = 16 smtpd_soft_error_limit = 3 smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit # Requirements for the sender details smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_$ # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.n$ # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_do$ # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes Here is also my /etc/postfix/aliases: # See man 5 aliases for format postmaster: root Here is also my /etc/mailname: nairanode.com I've also updated my hostname to nairanode.com However, when I run postalias /etc/postfix/aliases I get the following : postalias: warning: valid_hostname: invalid character 47(decimal): /etc/mailname postalias: fatal: file /etc/postfix/main.cf: parameter mydomain: bad parameter value: /etc/mailname Is there something I'm doing wrong?! I noticed that when I replace myorigin = /etc/mailname with myorigin = nairanode.com in my postfix config, I don't see any errors anymore after calling postalias. Is this a bug or something?!

  Read the article

• A lot of 408 errors in apache logs - how to prevent them?

  - by Robert Grezan

  I see a lot of 408 errors in my apache2 logs. I increased RequestReadTimeout and KeepAliveTimout but errors are still there. The errors look like this: xx.xx.xx.xx - - [05/Dec/2012:19:33:56 +0100] "-" 408 4561 "-" "-" xx.xx.xx.xx - - [05/Dec/2012:19:33:56 +0100] "-" 408 4561 "-" "-" I heard that these errors are related to Chrome optimization and some users did reported our site returning 408 internal error. It is interesting that we get two 408 error from same IP in sequence then it that IP start working.

  Read the article

• Oracle Identity Management 11g R1 Ps2 (11.1.1.3) Released

  - by mark.wilcox

  We released a new patchset for 11g R1 Identity Management - this includes Oracle Virtual Directory, Oracle Internet Directory and Oracle Identity Federation. This is primarily a bug fix release and is available for download from Support and eDelivery. Posted via email from Virtual Identity Dialogue

  Read the article

• Where to buy a domain for my local server [closed]

  - by Pradyut Bhattacharya

  I have made a website and hosted in my local computer using a static ip Where can i buy a domain name such as www.something.com such that it can redirect to my static IP. So that if i m using a page like a http://localhost/index.jsp it can be accessed by http://www.something.com/index.jsp Does it matter if i run the server locally or should I buy a managed web hosting server from a big company if the traffic is low on my site?

  Read the article

• git private server error: "Permission denied (publickey)."

  - by goddfree

  I followed the instructions here in order to set up a private git server on my Amazon EC2 instance. However, I am having problems when trying to SSH into the git account. Specifically, I get the error "Permission denied (publickey)." Here are the permissions of my files/folders on the EC2 server: drwx------ 4 git git 4096 Aug 13 19:52 /home/git/ drwx------ 2 git git 4096 Aug 13 19:52 /home/git/.ssh -rw------- 1 git git 400 Aug 13 19:51 /home/git/.ssh/authorized_keys Here are the permissions of my files/folders on my own computer: drwx------ 5 CYT staff 170 Aug 13 14:51 .ssh -rw------- 1 CYT staff 1679 Aug 13 13:53 .ssh/id_rsa -rw-r--r-- 1 CYT staff 400 Aug 13 13:53 .ssh/id_rsa.pub -rw-r--r-- 1 CYT staff 1585 Aug 13 13:53 .ssh/known_hosts When checking my logs in /var/log/secure, I used to get the following error message every time I tried to SSH: Authentication refused: bad ownership or modes for file /home/git/.ssh/authorized_keys However, after making a few permission changes, I no longer get this error message. Despite this, I am still getting the "Permission denied (publickey)." message every time I try to SSH. The command I am using to SSH is ssh -T git@my-ip. Here is the full log I get when I run ssh -vT [email protected]: OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to my-ip [my-ip] port 22. debug1: Connection established. debug1: identity file /Users/CYT/.ssh/id_rsa type -1 debug1: identity file /Users/CYT/.ssh/id_rsa-cert type -1 debug1: identity file /Users/CYT/.ssh/id_dsa type -1 debug1: identity file /Users/CYT/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.2 debug1: match: OpenSSH_6.2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 08:ad:8a:bc:ab:4d:5f:73:24:b2:78:69:46:1a:a5:5a debug1: Host 'my-ip' is known and matches the RSA host key. debug1: Found key in /Users/CYT/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/CYT/.ssh/id_rsa debug1: Trying private key: /Users/CYT/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I have spent a few hours going through threads on various sites, including SO and SF, looking for a solution. It seems that the permissions for my files are all okay, but I just can't figure out the problem. Any help would be greatly appreciated. Edit: EEAA: Here are the outputs you requested: $ getent passwd git git:x:503:504::/home/git:/bin/bash $ grep ssh ~git/.ssh/authorized_keys | wc -l grep: /home/git/.ssh/authorized_keys: Permission denied 0

  Read the article

• How do I install VirtualBox in 13.04?

  - by user155708

  I install the application using the .deb, but I can't get a virtual machine to boot. How to install it correctly from the beginning? Opening my newly-created XP machine yields this message: Failed to open a session for the virtual machine Windows fucking sucks. VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {db7ab4ca-2a3f-4183-9243-c1208da92392}

  Read the article

• problems in fetching upgrades

  - by andre

  presently using ubuntu 10.04 and I would like to upgrade to the latest ubuntu release but while trying to ugrade I have this errors . Can anybody help me how to solve this and proceed..just a beginner in using ubuntu. thanks W: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/l/linux-meta/linux-image-generic_2.6.32.38.44_i386.deb 404 Not Found [IP: 91.189.92.166 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/l/linux-meta/linux-headers-generic_2.6.32.38.44_i386.deb 404 Not Found [IP: 91.189.92.166 80]

  Read the article

• Two DHCP Servers, Block Clients for one of them?

  - by Rilindo

  I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

  Read the article

• why does ubuntu not recognise hard drive on windows 7

  - by kingsley osime

  Im trying to install ubuntu on window 7 virtual PC, when I boot to the ubuntu ISO image just before the partitioning stage where ubuntu confirms you have at leaset 4GB hard drive space the installer puts a cross on requirement indicating system does not have required amount of space... however I have a 220GB hard drive with 20GB used to create the virtual disk..Its all a bit weird as I can't seem figure it out

  Read the article

• Set up USB for Virtualbox

  - by kst

  I'm using Ubuntu Maverick and Virtual Box 3+ and I installed Window 7 Ultimate Editon. The problem is that it doesn't detect USB drives on Window 7 but USB peripherals (mouse + keybord) are working. I followed this instruction, but I can't find the user group vboxusers. How can I continue? I would also like to upgrade to the latest version without any risk (without losing my virtual hard disk drive).

  Read the article

• links for 2010-05-15

  - by Bob Rhubart

  Live Virtual SOA Training from Oracle University Enroll in "SOA: Architectural Concepts and Design Principles," a four-day Live Virtual Class that teaches you the key concepts associated with a SOA architecture, including principles, service design, and infrastructure. (tags: otn oracle soa architect training education)

  Read the article

• Oracle VM VirtualBox 4.3 is available

  - by uwes

  On 15th of October Oracle released Oracle VM Virtual Box 4.3. A brand-new release with a bunch of new functionality. Following are the main areas of where new things could be expected: New Platforms Hypervisor improvments Networking improvements Video capture Virtual webcam More details about the new release could be found here: What's New in VirtualBox 4.3 To download the software, go to: Oracle VM VirtualBox.

  Read the article

• How To Setup Domain Name for SchoolTool Local Server

  - by zeroseven0183

  I am currently testing SchoolTool 2.0 and I would like to do some things: This application is installed on a virtual machine running Ubuntu Server 11.10 bridged to our home network. The site is accessible through IP address. What I would like to do is setup a local domain, say schooltool.ourhomedomain.com. I thought my sister would appreciate it more if it were not via IP address. If there's anymore information needed, let me know. Thanks in advance!

  Read the article

• configure postfix to send as different domains

  - by Cerales

  I have postfix configured to receive mail for multiple domains. The primary domain goes through a standard postfix setup, whereas a secondary domain is handed by a /etc/postfix/virtual.db file which maps addresses for the secondary domain to other unix users. Incoming mail works perfectly, but when I send mail as users on the secondary domain, the mail receiver still sees it as coming from [unix username]@[primarydomain].net. Can anyone help me figure out how to configure the virtual postfix domain to send mail through the same domain it receives it as?

  Read the article

• Problem in shared folder

  - by alsadi90

  I followed the steps for sharing folders between windows 7 and Ubuntu in virtual box. but the folder appear with X sign and give me the following message when open it "the folder conent could not be displayed" and when choose "shared folder" from "Device" menu the following is written below "on the system page , you have asigned more than 50% of your computer's memory (2.93) to the virtual machine ...

  Read the article

• curl to itself behind firewall

  - by xtreaming

  I have a server A which is configured behind a firewall and has 30.x.x.x public adress and 172.x.x.x internal address. I'm trying to make a php Curl call from a script located on that server, to the 30.x.x.x external IP of that server but the curl call cannot be resolved. It seems that server A does not have a route to that IP. Did you encounter any similar situations? Any chance to solve it through static routes?

  Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >