Search Results

Search found 761 results on 31 pages for 'aka'.

Page 25/31 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Screen Aspect Ratio

  - by Bill Evjen

  Jeffrey Dean, Pixar Aspect Ratio is very important to home video. What is aspect ratio – the ratio from the height to the width 2.35:1 The image is 2.35 times wide as it is high Pixar uses this for half of our movies This is called a widescreen image When modified to fit your television screen They cut this to fit the box of your screen When a comparison is made huge chunks of picture is missing It is harder to find what is going on when these pieces are missing The whole is greater than the pieces themselves. If you are missing pieces – you are missing the movie The soul and the mood is in the film shots. Cutting it to fit a screen, you are losing 30% of the movie Why different aspect ratios? Film before the 1950s 1.33:1 Academy Standard There were all aspects of images though. There was no standard. Thomas Edison developed projecting images onto a wall/screen He didn’t patent it as he saw no value in it. Then 1.37:1 came about to add a strip of sound This is the same size as a 35mm film Around 1952 – TV comes along NTSC Television followed the Academy Standard (4x3) Once TV came out, movie theater attendance plummets So Film brought forth color to combat this. Also early 3D Also Widescreen was brought forth. Cinema-Scope Studios at the time made movies bigger and bigger There was a Napoleon movie that was actually 4x1 … really wide. 1.85:1 Academy Flat 2.35:1 Anamorphic Scope (aka Panavision/Cinemascope) Almost all movies are made in these two aspect ratios Pixar has done half in one and half in the other Why choose one over the other? Artist choice It is part of the story the director wants to tell Can we preserve the story outside of the theaters? TVs before 1998 – they were very square Now TVs are very wide Historical options Toy Story released as it was and people cut it in a way that wasn’t liked by the studio Pan and Scan is another option Cut and then scan left or right depending on where the action is Frame Height Pixar can go back and animate more picture to account for the bottom/top bars. You end up with more sky and more ground The characters seem to get lost in the picture You lose what the director original intended Re-staging For animated movies, you can move characters around – restage the scene. It is a new completely different version of the film This is the best possible option that Pixar came up with They have stopped doing this really as the demand as pretty much dropped off Why not 1.33 today? There has been an evolution of taste and demands. VHS is a linear item The focus is about portability and not about quality Most was pan and scan and the quality was so bad – but people didn’t notice DVD was introduced in 1996 You could have more content – two versions of the film You could have the widescreen version and the 1.33 version People realized that they are seeing more of the movie with the widescreen High Def Televisions (16x9 monitors) This was introduced in 2005 Blu-ray Disc was introduced in 2006 This is all widescreen You cannot find a square TV anymore TVs are roughly 1.85:1 aspect ratio There is a change in demand Users are used to black bars and are used to widescreen Users are educated now What’s next for in-flight entertainment? High Def IFE Personal Electronic Devices 3D inflight

  Read the article

• Handling Configuration Changes in Windows Azure Applications

  - by Your DisplayName here!

  While finalizing StarterSTS 1.5, I had a closer look at lifetime and configuration management in Windows Azure. (this is no new information – just some bits and pieces compiled at one single place – plus a bit of reality check) When dealing with lifetime management (and especially configuration changes), there are two mechanisms in Windows Azure – a RoleEntryPoint derived class and a couple of events on the RoleEnvironment class. You can find good documentation about RoleEntryPoint here. The RoleEnvironment class features two events that deal with configuration changes – Changing and Changed. Whenever a configuration change gets pushed out by the fabric controller (either changes in the settings section or the instance count of a role) the Changing event gets fired. The event handler receives an instance of the RoleEnvironmentChangingEventArgs type. This contains a collection of type RoleEnvironmentChange. This in turn is a base class for two other classes that detail the two types of possible configuration changes I mentioned above: RoleEnvironmentConfigurationSettingsChange (configuration settings) and RoleEnvironmentTopologyChange (instance count). The two respective classes contain information about which configuration setting and which role has been changed. Furthermore the Changing event can trigger a role recycle (aka reboot) by setting EventArgs.Cancel to true. So your typical job in the Changing event handler is to figure if your application can handle these configuration changes at runtime, or if you rather want a clean restart. Prior to the SDK 1.3 VS Templates – the following code was generated to reboot if any configuration settings have changed: private void RoleEnvironmentChanging(object sender, RoleEnvironmentChangingEventArgs e) {     // If a configuration setting is changing     if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))     {         // Set e.Cancel to true to restart this role instance         e.Cancel = true;     } } This is a little drastic as a default since most applications will work just fine with changed configuration – maybe that’s the reason this code has gone away in the 1.3 SDK templates (more). The Changed event gets fired after the configuration changes have been applied. Again the changes will get passed in just like in the Changing event. But from this point on RoleEnvironment.GetConfigurationSettingValue() will return the new values. You can still decide to recycle if some change was so drastic that you need a restart. You can use RoleEnvironment.RequestRecycle() for that (more). As a rule of thumb: When you always use GetConfigurationSettingValue to read from configuration (and there is no bigger state involved) – you typically don’t need to recycle. In the case of StarterSTS, I had to abstract away the physical configuration system and read the actual configuration (either from web.config or the Azure service configuration) at startup. I then cache the configuration settings in memory. This means I indeed need to take action when configuration changes – so in my case I simply clear the cache, and the new config values get read on the next access to my internal configuration object. No downtime – nice! Gotcha A very natural place to hook up the RoleEnvironment lifetime events is the RoleEntryPoint derived class. But with the move to the full IIS model in 1.3 – the RoleEntryPoint methods get executed in a different AppDomain (even in a different process) – see here.. You might no be able to call into your application code to e.g. clear a cache. Keep that in mind! In this case you need to handle these events from e.g. global.asax.

  Read the article

• Virtualized data centre&ndash;Part three: Architecture

  - by marc dekeyser

  Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

  Read the article

• Issues glVertexAttribPointer last 2 parameters?

  - by NoobScratcher

  Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

  Read the article

• Access Control Lists for Roles

  - by Kyle Hatlestad

  Back in an earlier post, I wrote about how to enable entity security (access control lists, aka ACLs) for UCM 11g PS3.  Well, there was actually an additional security option that was included in that release but not fully supported yet (only for Fusion Applications).  It's the ability to define Roles as ACLs to entities (documents and folders).  But now in PS5, this security option is now fully supported.   The benefit of defining Roles for ACLs is that those user roles come from the enterprise security directory (e.g. OID, Active Directory, etc) and thus the WebCenter Content administrator does not need to define them like they do with ACL Groups (Aliases).  So it's a bit of best of both worlds.  Users are managed through the LDAP repository and are automatically granted/denied access through their group membership which are mapped to Roles in WCC.  A different way to think about it is being able to add multiple Accounts to content items...which I often get asked about.  Because LDAP groups can map to Accounts, there has always been this association between the LDAP groups and access to the entity in WCC.  But that mapping had to define the specific level of access (RWDA) and you could only apply one Account per content item or folder.  With Roles for ACLs, it basically takes away both of those restrictions by allowing users to define more then one Role and define the level of access on-the-fly. To turn on ACLs for Roles, there is a component to enable.  On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top.   In the list of Disabled Components, enable the RoleEntityACL component. Then restart.  This is assuming the other configuration settings have been made for the other ACLs in the earlier post.   Once enabled, a new metadata field called xClbraRoleList will be created.  If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. For Users and Groups, these values are automatically picked up from the corresponding database tables.  In the case of Roles, there is an explicitly defined list of choices that are made available.  These values must match the roles that are coming from the enterprise security repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager.  On the Views tab, edit the values for the ExternalRolesView.  By default, 'guest' and 'authenticated' are added.  Once added, you can assign the roles to your content or folder. If you are a user that can both access the Security Group for that item and you belong to that particular Role, you now have access to that item.  If you don't belong to that Role, you won't! [Extra] Because the selection mechanism for the list is using a type-ahead field, users may not even know the possible choices to start typing to.  To help them, one thing you can add to the form is a placeholder field which offers the entire list of roles as an option list they can scroll through (assuming its a manageable size)  and view to know what to type to.  By being a placeholder field, it won't need to be added to the custom metadata database table or search engine.  

  Read the article

• Can you/should you develop components for ASP.NET MVC?

  - by Vilx-

  Following from the previous question I've started to wonder - is it possible to implement "Components" in ASP.NET MVC (latest version)? And should you? Let's clarify what I mean with a "component". With that I mean a "control" (aka "widget"), similar to those that ASP.NET webforms is built upon. A gridview might be a good example. In webforms I can place on my form a datasource component (one line of code), a gridview component (another line of code) and bind them together (specify an attribute on the gridview). In the codebehind file I fill the datasource with data (a few lines of DB-querying code), and I'm all set. At this point the gridview is a fully functional standalone component. I can open the form, and I'll see all the data. I can sort it by clicking on the column headers; it is split into several pages; I can drag the column headers around and rearrange columns; I can turn on "grouping" mode; etc. And I don't need to write another line of code for any of it. The gridview, as a component, already has all the code tucked away in its classes and assemblies. I just place it on the form, initialize it, and it Just Works. At some times (like sorting or navigation to a different page) it will also perform ajax callbacks to the server, but those too will be handled internally, with my code having no knowledge at all about it. And then there are also events that I can attach if I want to get notified when something happens. In MVC I cannot see a way of doing this cleanly. Sure, there are the partial views, but those only handle half of the problem - they render the initial HTML. Some more can be achieved with client-side Javascript (like column re-arranging), but when the grid needs to do an ajax callback (say, to fetch the next page of data), my code will have to get involved and process that request. At best I guess I can provide some helper methods to process it, but I'll have to write the code that calls them, and also provide a controller method with signature matching the arguments of that callback. I guess that I could make some hacks with global events or special routes or something, but that just seems... hackish. Unelegant. Perhaps this is not the MVC way? Although I've completed one project in it, I'm still far from being an MVC expert. But then what is? In the intranet application that we're building there are dozens upon dozens of such grids. Naturally I want them all to have a unified look & behavior, and I don't want to repeat the same code all over the place. So what's the "MVC" approach to this problem?

  Read the article

• Using WKA in Large Coherence Clusters (Disabling Multicast)

  - by jpurdy

  Disabling hardware multicast (by configuring well-known addresses aka WKA) will place significant stress on the network. For messages that must be sent to multiple servers, rather than having a server send a single packet to the switch and having the switch broadcast that packet to the rest of the cluster, the server must send a packet to each of the other servers. While hardware varies significantly, consider that a server with a single gigabit connection can send at most ~70,000 packets per second. To continue with some concrete numbers, in a cluster with 500 members, that means that each server can send at most 140 cluster-wide messages per second. And if there are 10 cluster members on each physical machine, that number shrinks to 14 cluster-wide messages per second (or with only mild hyperbole, roughly zero). It is also important to keep in mind that network I/O is not only expensive in terms of the network itself, but also the consumption of CPU required to send (or receive) a message (due to things like copying the packet bytes, processing a interrupt, etc). Fortunately, Coherence is designed to rely primarily on point-to-point messages, but there are some features that are inherently one-to-many: Announcing the arrival or departure of a member Updating partition assignment maps across the cluster Creating or destroying a NamedCache Invalidating a cache entry from a large number of client-side near caches Distributing a filter-based request across the full set of cache servers (e.g. queries, aggregators and entry processors) Invoking clear() on a NamedCache The first few of these are operations that are primarily routed through a single senior member, and also occur infrequently, so they usually are not a primary consideration. There are cases, however, where the load from introducing new members can be substantial (to the point of destabilizing the cluster). Consider the case where cluster in the first paragraph grows from 500 members to 1000 members (holding the number of physical machines constant). During this period, there will be 500 new member introductions, each of which may consist of several cluster-wide operations (for the cluster membership itself as well as the partitioned cache services, replicated cache services, invocation services, management services, etc). Note that all of these introductions will route through that one senior member, which is sharing its network bandwidth with several other members (which will be communicating to a lesser degree with other members throughout this process). While each service may have a distinct senior member, there's a good chance during initial startup that a single member will be the senior for all services (if those services start on the senior before the second member joins the cluster). It's obvious that this could cause CPU and/or network starvation. In the current release of Coherence (3.7.1.3 as of this writing), the pure unicast code path also has less sophisticated flow-control for cluster-wide messages (compared to the multicast-enabled code path), which may also result in significant heap consumption on the senior member's JVM (from the message backlog). This is almost never a problem in practice, but with sufficient CPU or network starvation, it could become critical. For the non-operational concerns (near caches, queries, etc), the application itself will determine how much load is placed on the cluster. Applications intended for deployment in a pure unicast environment should be careful to avoid excessive dependence on these features. Even in an environment with multicast support, these operations may scale poorly since even with a constant request rate, the underlying workload will increase at roughly the same rate as the underlying resources are added. Unless there is an infrastructural requirement to the contrary, multicast should be enabled. If it can't be enabled, care should be taken to ensure the added overhead doesn't lead to performance or stability issues. This is particularly crucial in large clusters.

  Read the article

• Get 5.1 surround sound from computer through a VCR config?

  - by Wedding Nails

  I'm posting to see if my idea of this setup is right and can be done. I currently have the following "equipment": a JVC VCR -quite old-, which has built in surround sound (aka it has several speaker outputs, which I believe is 5.1 and are connected to several speakers that are in every corner of the room), a computer with SPDIF optical output and a new flat screen TV (with built in HDMI). I want the computer to take advantage of the VCR's surround system (all the speakers in the room) in order to play mainly music and video always with all the speakers (5.1) and with the maximum sound quality. Currently, the computer plays sound only through the front speaker (I connect one output to the on board pc audio input) and the quality is really bad. As a side note, the computer video runs with S-video (old school), and the picture quality as you would imagine, is really bad with the new big LCD screen. My main goals are: to upgrade the picture with a new video card which would support HDMI (my tv has HDMI). to buy a SPDIF optical cable, connect one end to the VCR SPDIF input and the other end to the PC output This is theoretically what I've researched so far, and I came out with several questions: in this case, with the SPDIF cable connected, and all the configurations done in windows allowing the 5.1, will I get every content I play "converted" or played through all of my speakers? (I read this forum post). I already know that in order for this setup to play from all the speakers, the content/audio source has to be 5.1. but my question is, if there is a way to play from all of the speakers no matter what type of content I'm playing (that's why I said conversion there) I already know that HDMI cables carry digital sound. Is there a way I can only use said HDMI cord to the tv, and get sound through the VCR? (I'm not too sure about this, I would have to disable the TVs speakers and use the VCR surround as default, but I have no clue wether this can be done or not). Update: The ultimate question is, do I really have to rely on "sound virtualization" technology to get sound from all the speakers, no matter what content I play? (do I require a newer sound card, like a creative soundblaster with said technology?) Thanks!

  Read the article

• Windows 8 with LiveID login authenticates as Guest to remote SQl Server

  - by Tim Long

  I have a network where several users are using Office Accounting 2009 in multi-user client/server mode. OA is built on SQL Server. One PC acts as the 'server' and has the SQl Server instance, the others have only the application installed and no SQL instance, all of the apps connect remotely to the SQL instance on the 'server'. I'm using the term 'server' loosely here, it is just a normal workstation that happens to be designated as the server and runs the SQL instance. There is no NT domain, all user accounts are local accounts. The way that OA works in multi-user mode is that each user is required to have a local account with the same username and password on both the client and 'server' PCs. This has been working well, no along comes Windows 8. I use my 'Microsoft Account' aka LiveID to log into Windows 8. Office Accounting runs fine and attempts to connect to the database, but fails, 'you do not have permission to perform this operation'. In the SQL logs, I get this error: 2012-10-28 17:54:01.32 Logon Error: 18456, Severity: 14, State: 11. 2012-10-28 17:54:01.32 Logon Login failed for user 'SERVER\Guest'. Reason: Token-based server access validation failed with an infrastructure SERVER is the hostname of the server. So it seems to be authenticating as 'Guest'?? To verify this, I enabled the Guest account on the 'server' PC and then added Guest as an allowed user within Office Accounting (this simply creates the user in SQL and gives it an appropriate database role). Sure enough, My Windows 8 PC was then able to connect to the database when using Office Accounting. Clearly, having users authenticate as 'Guest' stinks from a security and auditing standpoint. So what I need are some ideas for how to work around this. I've tried switching the Windows 8 PC to a 'local account' and that works too, but requires giving up significant functionality on the Windows 8 PC. What I really need is a way to force the Windows 8 PC to use a specific set of credentials when connecting to the remote SQL instance. Office Accounting takes the logged in username, which is my LiveID and doesn't correspond to any Windows user name. Anyone solved this issue?

  Read the article

• With CentOS 6 and LXC, "ifconfig" is unable to see network interface (but busybox "ifconfig" works fine)

  - by larsks

  I've just started working with LXC under CentOS 6 (via the libvirt adapter). If I create an LXC container, I'm unable to see any network interfaces when using the native system tools: # ifconfig -a # The behavior is very odd; specifying an interface by names yields neither the expected output nor an error message. This is true even for clearly invalid interface names, like this: # ifconfig foo # The ip command exhibits the same behavior. On the other hand, if I use "ifconfig" provided by busybox, everything works as expected: # busybox ifconfig -a eth0 Link encap:Ethernet HWaddr 52:54:00:E0:12:C8 inet6 addr: fe80::5054:ff:fee0:12c8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:268 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17814 (17.3 KiB) TX bytes:552 (552.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So...what does busybox know that the native tools don't? The libvirt config for this environment is pretty standard; the network definition looks like this: <interface type='network'> <mac address='52:54:00:e0:12:c8'/> <source network='default'/> <target dev='veth0'/> </interface> The full configuration is here if you think it might help. I'm running: lxc-0.7.2-2.el6.x86_64 kernel-2.6.32-71.29.1.el6.x86_64 EDIT Weirder and weirder...it's a display issue, not a functionality issue. I can see the output of ifconfig if I pipe it into anything, so for example: # ifconfig eth0 | cat eth0 Link encap:Ethernet HWaddr 52:54:00:E0:12:C8 inet addr:192.168.10.10 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fee0:12c8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:573 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:37914 (37.0 KiB) TX bytes:552 (552.0 b) And in fact even when not piping the output, strace shows that ifconfig is in fact writing the output to file descriptor 1 (aka stdout), so it's not clear why no output is actually showing up. This could be either an LXC or a virsh issue, I guess.

  Read the article

• Seeking (somewhat) better explanations about supporting > 2.1 TB hard drives.

  - by irrational John

  Today while Googling about I stumbled across posts claiming that Seagate plans to ship a 3TB drive sometime later in 2010. Unfortunately, the stuff I looked at all seemed to contain tidbits of info which I didn't think fit together properly. (I would link to some examples, but I'm only allowed 1 link per post at the moment). Now I really don't have any "need" to better understand the underlying tedious details of this. I am just curious. And confused. So ... some questions I'm hoping someone better informed than I might answer. The talk about a potential addressing problem in both the hardware and the software confused me. The assertion is that something called something called Long LBA addressing (LLBA) is needed in the Command Descriptor Block as a way to get around the current limits to access a hard drive bigger than ~2.1 (or ~2.2?) TB. OK, fine. But I thought the last time this problem came up it was solved by extending the length of the LBA field from 28 to 48 bits. (Remember this website? www.48bitlba.com) A 6 byte LBA is clearly large enough, so what's up with this LLBA talk. I thought this was all fixed back by Win XP SP2, if not sooner? And certainly all the hardware should be up to the task, shouldn't it? The real problem as I understand it with drives much bigger than 2 TB are the 4 byte LBA fields in the Master Boot Record (MBR) used to partition just about all hard drives at the moment. The most likely solution is to migrate to Intel's GUID Partition Table (GPT). A GPT uses 8 byte fields for the LBA. What I don't understand in this context is what is the problem with booting say Windows from a 3TB drive that uses a GPT. Granted, the current PC BIOS wouldn't know how to recognize or work with a GPT. But every GPT comes with a so-called "Safety" or "Guarding" MBR in sector 0.Apple already uses a hybrid version of the MBR to allow them to boot Windows on their Intel Macs (aka Boot Camp). Couldn't something similar be done to allow the PC BIOS to recognize and boot from a partition in, say, the first 1 GB of a 3GB or larger drive? I've got more questions such as where do 4K sectors fit into all of this. But it's probably time I just shut up and posted this. ;-) -irrational john

  Read the article

• nginx can't see MySQL

  - by user135235

  I have a fully working Joomla 2.5.6 install driven by a local MySQL server, but I'd like to test nginx to see if it's a faster web serving experience than Apache. \ PHP 5.4.6 (PHP54w) \ CentOS 6.2 \ Joomla 2.5.6 \ PHP54w-fpm.i386 (FastCGI process manager) \ php -m shows: mysql & mysqli modules loaded Nginx seems to have installed fine via yum, it can process a PHP-info file via FastCGI perfectly OK (http://37.128.190.241/php.php) but when I stop Apache, start nginx instead and visit my site I get: "Database connection error (1): The MySQL adapter 'mysqli' is not available." I've tried adjusting my Joomla configuration.php to use mysql instead of mysqli but I get the same basic error, only this time "Database connection error (1): The MySQL adapter 'mysql' is not available" of course! Can anyone think what the problem might be please? I did try explicitly setting extension = mysqli.so and extension = mysql.so in my php.ini to try and force the issue (despite php -m showing they were both successfully loaded anyway) - no difference. I have a pretty standard nginx default.conf: server { listen 80; server_name www.MYDOMAIN.com; server_name_in_redirect off; access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log info; root /var/www/html/MYROOT_DIR; index index.php index.html index.htm default.html default.htm; # Support Clean (aka Search Engine Friendly) URLs location / { try_files $uri $uri/ /index.php?q=$uri&$args; } # deny running scripts inside writable directories location ~* /(images|cache|media|logs|tmp)/.*\.(php|pl|py|jsp|asp|sh|cgi)$ { return 403; error_page 403 /403_error.html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi.conf; } # caching of files location ~* \.(ico|pdf|flv)$ { expires 1y; } location ~* \.(js|css|png|jpg|jpeg|gif|swf|xml|txt)$ { expires 14d; } } Snip of output from phpinfo under nginx: Server API FPM/FastCGI Virtual Directory Support disabled Configuration File (php.ini) Path /etc Loaded Configuration File /etc/php.ini Scan this dir for additional .ini files /etc/php.d Additional .ini files parsed /etc/php.d/curl.ini, /etc/php.d/fileinfo.ini, /etc/php.d/json.ini, /etc/php.d/phar.ini, /etc/php.d/zip.ini Snip of output from phpinfo under Apache: Server API Apache 2.0 Handler Virtual Directory Support disabled Configuration File (php.ini) Path /etc Loaded Configuration File /etc/php.ini Scan this dir for additional .ini files /etc/php.d Additional .ini files parsed /etc/php.d/curl.ini, /etc/php.d/fileinfo.ini, /etc/php.d/json.ini, /etc/php.d/mysql.ini, /etc/php.d/mysqli.ini, /etc/php.d/pdo.ini, /etc/php.d/pdo_mysql.ini, /etc/php.d/pdo_sqlite.ini, /etc/php.d/phar.ini, /etc/php.d/sqlite3.ini, /etc/php.d/zip.ini Seems that with Apache, PHP is loading substantially more additional .ini files, including ones relating to mysql (mysql.ini, mysqli.ini, pdo_mysql.ini) than nginx. Any ideas how I get nginix to also call these additional .ini's ? Thanks in advance, Steve

  Read the article

• How do I configure Reverse Group Membership Maintenance on an openldap server? (memberOf)

  - by emills

  I am currently working on integrating LDAP authentication into a system and I would like to restrict access based on LDAP group. The only way to do this is via a search filter and therefore I believe my only option to be the use of the "memberOf" attribute in my search filter. It is my understanding that the "memberOf" attribute is an operational attribute which can be created by the server for me anytime a new "member" attribute is created for any "groupOfNames" entry on the server. My main goal is to be able to add a "member" attribute to an existing "groupOfNames" entry and have a matching "memberOf" attribute be added to the DN I provide. What I have managed to achieve so far: I'm still pretty new to LDAP administration but based on what I found in the openldap admin's guide, it looks like Reverse Group Membership Maintence aka "memberof overlay" would achieve exactly the effect I am looking for. My server is currently running a package installation (slapd on ubuntu) of openldap 2.4.15 which uses "cn=config" style runtime configuration. Most of the examples I have found still reference the older "slapd.conf" method of static configuration and I have tried my best to adapt the configurations to the new directory based model. I have added the following entries to enable the memberof overlay module: Enable the module with olcModuleLoad cn=config/cn\=module\{0\}.ldif dn: cn=module{0} objectClass: olcModuleList cn: module{0} olcModulePath: /usr/lib/ldap olcModuleLoad: {0}back_hdb olcModuleLoad: {1}memberof.la structuralObjectClass: olcModuleList entryUUID: a410ce98-3fdf-102e-82cf-59ccb6b4d60d creatorsName: cn=config createTimestamp: 20090927183056Z entryCSN: 20091009174548.503911Z#000000#000#000000 modifiersName: cn=admin,cn=config modifyTimestamp: 20091009174548Z Enabled the overlay for the database and allowed it to use it's default settings (groupOfNames,member,memberOf,etc) cn=config/olcDatabase={1}hdb/olcOverlay\=\{0\}memberof dn: olcOverlay={0}memberof objectClass: olcMemberOf objectClass: olcOverlayConfig objectClass: olcConfig objectClass: top olcOverlay: {0}memberof structuralObjectClass: olcMemberOf entryUUID: 6d599084-490c-102e-80f6-f1a5d50be388 creatorsName: cn=admin,cn=config createTimestamp: 20091009104412Z olcMemberOfRefInt: TRUE entryCSN: 20091009173500.139380Z#000000#000#000000 modifiersName: cn=admin,cn=config modifyTimestamp: 20091009173500Z My current result: By using the above configuration, I am able to add a NEW "groupOfNames" with any number of "member" entries and have all the involved DNs updated with a "memberOf" attribute. This is part of the behavior I would expect. While I believe the following should have been accomplished with the memberof overlay, I still do not know how to do the following and I would gladly welcome any advice: Add a "member" attribute to an EXISTING "groupOfNames" and have a corresponding "memberOf" attribute be created automatically. Remove a "member" attribute and have the corresponding "memberOf" attribute" be removed automatically.

  Read the article

• Wifi network stopped being visible (and usable) (Linksys wag320n)

  - by s427

  Basically, my wifi network simply stopped working for no apparent reason. It doesn't appear in the list of the available networks anymore. I can see all my neighbors' networks, but not mine. It's as if it doesn't exist anymore. The internet connection (non-wifi), which goes through the same modem/router, is fine though. I already had a similar problem about one year ago (see here: Wifi network SSID not visible ), just after buying this very modem. I finally got it to work after performing two factory resets and getting rid of the Cisco "Magic" software; but this time it's not working. I use a linksys router-modem (WAG320N) which is directly connected (via network cable) to my desktop computer (Windows 7). I have (mainly) two devices that use the wifi network: my phone (Samsung Galaxy Nexus) and an Asus tablet (TF201, aka Transformer Prime). I also resurrected an old laptop computer (Dell, running Windows XP) to test that, and it doesn't see anything either (apart from the 20 other wifi networks, of course ^^). This wifi network was working just fine and has been for about a year. I haven't touched the modem settings so I have no idea what's causing the problem. I tried: making my phone "forget" about my network, hoping it would see it again after that: no luck. re-entering the network informations (SSID/password) manually on my phone: still no luck (says it's not in range) exporting the modem configuration, resetting the modem (factory reset, via modem admin), restarting it, importing the configuration: nope. factory reset, turning it off for 15 minutes, restarting, re-factory reset, and entering the configuration manually: still nothing. Has anybody experienced something similar before? Have you any suggestion to fix that? Thanks in advance. PS: to clear things up, here are the settings of my modem regarding wifi: Basic wireless settings: Configuration: manual Radio Band: 2.4GHz Wireless Network Mode: B/G/N-Mixed SSID: s427 Channel Bandwidth: Wide - 40 MHz Channel Wide Channel: 9 - 2.452GHz Standard Channel: 11 - 2.462GHz SSID Broadcast: Enable Advanced Wireless Settings AP Isolation: Disable Authentication Type: Auto Basic Rate: Default Transmission Rate: Auto N Transmission Rate: Auto CTS Protection Mode: Disable Beacon Interval: 100 DTIM Interval: 1 Fragmentation Threshold: 2346 RTS Threshold: 2346

  Read the article

• Where is my app.config for SSIS?

  Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

  Read the article

• Where is my app.config for SSIS?

  Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

  Read the article

• The Complementary Roles of PLM and PIM

  - by Ulf Köster

  Oracle Product Value Chain Solutions (aka Enterprise PLM Solutions) are a comprehensive set of product management solutions that work together to provide Oracle customers with a broad array of capabilities to manage all aspects of product life: innovation, design, launch, and supply chain / commercialization processes beyond the capabilities and boundaries of traditional engineering-focused Product Lifecycle Management applications. They support companies with an integrated managed view across the product value chain: From Lab to Launch, From Farm to Fork, From Concept to Product to Customer, From Product Innovation to Product Design and Product Commercialization. Product Lifecycle Management (PLM) represents a broad suite of software solutions to improve product-oriented business processes and data. PLM success stories prove that PLM helps companies improve time to market, increase product-related revenue, reduce product costs, reduce internal costs and improve product quality. As a maturing suite of enterprise solutions, PLM is still evolving to realize the promise it can provide across all facets of a business and all phases of the product lifecycle. The vision for PLM includes everything from gathering early requirements for a product through multiple stages of the product lifecycle from product design, through commercialization and eventual product retirement or replacement. In discrete or process industries, PLM is typically more focused on Product Definition as items with respect to the technical view of a material or part, including specifications, bills of material and manufacturing data. With Agile PLM, this is specifically related to capabilities addressing Product Collaboration, Governance and Compliance, Product Quality Management, Product Cost Management and Engineering Collaboration. PLM today is mainly addressing key requirements in the early product lifecycle, in engineering changes or in the “innovation cycle”, and primarily adds value related to product design, development, launch and engineering change process. In short, PLM is the master for Product Definition, wherever manufacturing takes place. Product Information Management (PIM) is a product suite that has evolved in parallel to PLM. Product Information Management (PIM) can extend the value of PLM implementations by providing complementary tools and capabilities. More relevant in the area of Product Commercialization, the vision for PIM is to manage product information throughout an enterprise and supply chain to improve product-related knowledge management, information sharing and synchronization from multiple data sources. PIM success stories have shown the ability to provide multiple benefits, with particular emphasis on reducing information complexity and information management costs. Product Information in PIM is typically treated as the commercial view of a material or part, including sales and marketing information and categorization. PIM collects information from multiple manufacturing sites and multiple suppliers into its repository, but also provides integration tools to push the information back out to the other systems, serving as an active central repository with the aim to provide a holistic view on any product sold by a company (hence the name “Product Hub”). In short, PIM is the master of commercial Product Information. So PIM is quickly becoming mandatory because of its value in optimizing multichannel selling processes and relationships with customers, as you can see from the following table: Viewpoint PLM Current State PIM Key Benefits PIM adds to PLM Product Lifecycle Primarily R&D Front end Innovation Cycle Change process Primarily commercial / transactional state of lifecycle Provides a seamless information flow from design and manufacturing through the ultimate selling and servicing of products Data Primarily focused on “item” vs. “product” data Product structures Specifications Technical information Repository for all product information. Reaches out to entire enterprise and its various silos of product information and descriptions Provides a “trusted source” of accurate product information to the internal organization and trading partners Data Lifecycle Repository for all design iterations Historical information Released, current information, with version management and time stamping Provides a single location to track and audit historical product information Communication PLM release finished product to ERP PLM is the master for Product Definition Captures information from disparate sources, including in-house data stores Recognizes the reality of today’s data “mess” across information silos Provides the ability to package product information to its audience in the desired, relevant format to meet their exacting business requirements Departmental R&D Manufacturing Quality Compliance Procurement Strategic Marketing Focus on Marketing and Sales Gathering information from other Departments, multiple sites, multiple suppliers A singular enterprise solution that leverages existing information silos and data stores Supply Chain Multi-site internal collaboration Supplier collaboration Customer collaboration Works with customers, exchanges / data pools, and trading partners to provide relevant product information packaged the way the customer desires Provides ability to provide trading partners and internal customers with information in a manner they desire, continuously Tools Data Management Collaboration Innovation Management Cleansing Synchronization Hub functions Consistent, clean and complete commercial product information The goals of both PLM and PIM, put simply, are to help companies make more profit from their products. PLM and PIM solutions can be easily added as they share some of the same goals, while coming from two different perspectives: the definition of the product and the commercialization of the product. Both can serve as a form of product “system of record”, but take different approaches to delivering value. Oracle Product Value Chain solutions offer rich new strategies for executives to collectively leverage Agile PLM, Product Data Hub, together with Enterprise Data Quality for Products, and other industry leading Oracle applications to achieve further incremental value, like Oracle Innovation Management. This is unique on the market today.

  Read the article

• Get your content off Blogger.com

  - by Daniel Moth

  Due to blogger.com deprecating FTP users I've decided to move my blog. When I think of the content of a blog, 4 items come to mind: blog posts, comments, binary files that the blog posts linked to (e.g. images, ZIP files) and the CSS+structure of the blog. 1. Binaries The binary files you used in your blog posts are sitting on your own web space, so really blogger.com is not involved with that. Nothing for you to do at this stage, I'll come back to these in another post. 2. CSS and structure In the best case this exists as a separate CSS file on your web space (so no action for now) or in a worst case, like me, your CSS is embedded with the HTML. In the latter case, simply navigate from you dashboard to "Template" then "Edit HTML" and copy paste the contents of the box. Save that locally in a txt file and we'll come back to that in another post. 3. Blog posts and Comments The blog posts and comments exist in all the HTML files on your own web space. Parsing HTML files to extract that can be painful, so it is easier to download the XML files from blogger's servers that contain all your blog posts and comments. 3.1 Single XML file, but incomplete The obvious thing to do is go into your dashboard "Settings" and under the "Basic" tab look at the top next to "Blog Tools". There is a link there to "Export blog" which downloads an XML file with both comments and posts. The problem with that is that it only contains 200 comments - if you have more than that, you will lose the surplus. Also, this XML file has a lot of noise, compared to the better solution described next. (note that a tool I will refer to in a future post deals with either kind of XML file) 3.2 Multiple XML files First you need to find your blog ID. In case you don't know what that is, navigate to the "Template" as described in section 2 above. You will find references to the blog id in the HTML there, but you can also see it as part of the URL in your browser: blogger.com/template-edit.g?blogID=YOUR_NUMERIC_ID. Mine is 7 digits. You can now navigate to these URLs to download the XML for your posts and comments respectively: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=1 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=1 Note that you can only get 500 posts at a time and only 200 comments at a time. To get more than that you have to change the URL and download the next batch. To get you started, to get the XML for the next 500 posts and next 200 comments respectively you’d have to use these URLs: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=501 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=201 ...and so on and so forth. Keep all the XML files in the same folder on your local machine (with nothing else in there). 4. Validating the XML aka editing older blog posts The XML files you just downloaded really contain HTML fragments inside for all your blog posts. If you are like me, your blog posts did not conform to XHTML so passing them to an XML parser (which is what we will want to do) will result in the XML parser choking. So the next step is to fix that. This can be no work at all for you, or a huge time sink or just a couple hours of pain (which was my case). The process I followed was to attempt to load the XML files using XmlDocument.Load and wait for the exception to be thrown from my code. The exception would point to the exact offending line and column which would help me fix the issue. Rather than fix it in the XML itself, I would go back and edit the offending blog post and fix it there - recommended! Then I'd repeat the cycle until the XML could be loaded in the XmlDocument. To give you an idea, some of the issues I encountered are: extra or missing quotes in img and href elements, direct usage of chevrons instead of encoding them as &lt;, missing closing tags, mismatched nested pairs of elements and capitalization of html elements. For a full list of things that may go wrong see this. 5. Opportunity for other changes I also found a few posts that did not have a category assigned so I fixed those too. I took the further opportunity to create new categories and tag some of my blog posts with that. Note that I did not remove/change categories of existing posts, but only added.   In an another post we'll see how to use the XML files you stored in the local folder… Comments about this post welcome at the original blog.

  Read the article

• Do You Develop Your PL/SQL Directly in the Database?

  - by thatjeffsmith

  I know this sounds like a REALLY weird question for many of you. Let me make one thing clear right away though, I am NOT talking about creating and replacing PLSQL objects directly into a production environment. Do we really need to talk about developers in production again? No, what I am talking about is a developer doing their work from start to finish in a development database. These are generally available to a development team for building the next and greatest version of your databases and database applications. And of course you are using a third party source control system, right? Last week I was in Tampa, FL presenting at the monthly Suncoast Oracle User’s Group meeting. Had a wonderful time, great questions and back-and-forth. My favorite heckler was there, @oraclenered, AKA Chet Justice.  I was in the middle of talking about how it’s better to do your PLSQL work in the Procedure Editor when Chet pipes up - Don’t do it that way, that’s wrong Just press play to edit the PLSQL directly in the database Or something along those lines. I didn’t get what the heck he was talking about. I had been showing how the Procedure Editor gives you much better feedback and support when working with PLSQL. After a few back-and-forths I got to what Chet’s main objection was, and again I’m going to paraphrase: You should develop offline in your SQL worksheet. Don’t do anything in the database until it’s done. I didn’t understand. Were developers expected to be able to internalize and mentally model the PL/SQL engine, see where their errors were, etc in these offline scripts? No, please give Chet more credit than that. What is the ideal Oracle Development Environment? If I were back in the ‘real world’ of database development, I would do all of my development outside of the ‘dev’ instance. My development process looks a little something like this: Do I have a program that already does something like this – copy and paste Has some smart person already written something like this – copy and paste Start typing in the white-screen-of-panic and bungle along until I get something that half-works Tweek, debug, test until I have fooled my subconscious into thinking that it’s ‘good’ As you might understand, I don’t want my co-workers to see the evolution of my code. It would seriously freak them out and I probably wouldn’t have a job anymore (don’t remind me that I already worked myself out of development.) So here’s what I like to do: Run a Local Instance of Oracle on my Machine and Develop My Code Privately I take a copy of development – that’s what source control is for afterall – and run it where no one else can see it. I now get to be my own DBA. If I need a trace – no problem. If I want to run an ASH report, no worries. If I need to create a directory or run some DataPump jobs, that’s all on me. Now when I get my code ‘up to snuff,’ then I will check it into source control and compile it into the official development instance. So my teammates suddenly go from seeing no program, to a mostly complete program. Is this right? If not, it doesn’t seem wrong to me. And after talking to Chet in the car on the way to the local cigar bar, it seems that he’s of the same opinion. So what’s so wrong with coding directly into a development instance? I think ‘wrong’ is a bit strong here. But there are a few pitfalls that you might want to look out for. A few come to mind – and I’m sure Chet could add many more as my memory fails me at the moment. But here goes: Development instance isn’t properly backed up – would hate to lose that work Development is wiped once a week and copied over from Prod – don’t laugh Someone clobbers your code You accidentally on purpose clobber someone else’s code The more developers you have in a single fish pond, the greater chance something ‘bad’ will happen This Isn’t One of Those Posts Where I Tell You What You Should Be Doing I realize many shops won’t be open to allowing developers to stage their own local copies of Oracle. But I would at least be aware that many of your developers are probably doing this anyway – with or without your tacit approval. SQL Developer can do local file tracking, but you should be using Source Control too! I will say that I think it’s imperative that you control your source code outside the database, even if your development team is comprised of a single developer. Store your source code in a file, and control that file in something like Subversion. You would be shocked at the number of teams that do not use a source control system. I know I continue to be shocked no matter how many times I meet another team running by the seat-of-their-pants. I’d love to hear how your development process works. And of course I want to know how SQL Developer and the rest of our tools can better support your processes. And one last thing, if you want a fun and interactive presentation experience, be sure to have Chet in the room

  Read the article

• SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff)

  - by jamiet

  Recently I noticed a tweet from notable SQL Server author and community dude-at-large Steve Jones in which he asked how many SQL Server developers were putting their SQL Server source code (i.e. DDL) under source control (I’m paraphrasing because I can’t remember the exact tweet and Twitter’s search functionality is useless). The question surprised me slightly as I thought a more pertinent question would be “how many SQL Server developers are not using source control?” because I have been doing just that for many years now and I simply assumed that use of source control is a given in this day and age. Then I started thinking about it. “Perhaps I’m wrong” I pondered, “perhaps the SQL Server folks that do use source control in their day-to-day jobs are in the minority”. So, dear reader, I’m interested to know a little bit more about your use of source control. Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? To encourage you to contribute I have five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect to give away to what I consider to be the five best replies (“best” is totally subjective of course but this is my blog so my decision is final ), if you want to be considered don’t forget to leave contact details; email address, Twitter handle or similar will do. To start you off and to perhaps get the brain cells whirring, here are my answers to the questions above: Are you putting your SQL Server code into a source control system? As I think I’ve already said…yes. Always. If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? I move around a lot between many clients so it changes on a fairly regular basis; my current client uses Team Foundation Server (aka TFS) and as part of a separate project is trialing the use of Team Foundation Service. I have used SVN extensively in the past which I am a fan of (I generally prefer it to TFS) and am trying to get my head around Git by using it for ObjectStorageHelper. What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? On my current project, Team Explorer. In the past I have used Tortoise to connect to SVN. Why did you make those particular software choices? I generally use whatever the client uses and given that I work with SQL Server I find that the majority of my clients use TFS, I guess simply because they are Microsoft development shops. Any interesting anecdotes to share in regard to your use of source control and SQL Server? Not an anecdote as such but I am going to share some frustrations about TFS. In many ways TFS is a great product because it integrates many separate functions (source control, work item tracking, build agents) into one whole and I’m firmly of the opinion that that is a good thing if for no reason other than being able to associate your check-ins with a work-item. However, like many people there are aspects to TFS source control that annoy me day-in, day-out. Chief among them has to be the fact that it uses a file’s read-only property to determine if a file should be checked-out or not and, if it determines that it should, it will happily do that check-out on your behalf without you even asking it to. I didn’t realise how ridiculous this was until I first used SVN about three years ago – with SVN you make any changes you wish and then use your source control client to determine which files have changed and thus be checked-in; the notion of “check-out” doesn’t even exist. That sounds like a small thing but you don’t realise how liberating it is until you actually start working that way. Hoping to hear some more anecdotes and opinions in the comments. Remember….free software is up for grabs! @jamiet 

  Read the article

• Creating a Reverse Proxy with URL Rewrite for IIS

  - by OWScott

  There are times when you need to reverse proxy through a server. The most common example is when you have an internal web server that isn’t exposed to the internet, and you have a public web server accessible to the internet. If you want to serve up traffic from the internal web server, you can do this through the public web server by creating a tunnel (aka reverse proxy). Essentially, you can front the internal web server with a friendly URL, even hiding custom ports. For example, consider an internal web server with a URL of http://10.10.0.50:8111. You can make that available through a public URL like http://tools.mysite.com/ as seen in the following image. The URL can be made public or it can be used for your internal staff and have it password protected and/or locked down by IP address. This is easy to do with URL Rewrite and IIS. You will also need Application Request Routing (ARR) installed even though for a simple reverse proxy you won’t use most of ARR’s functionality. If you don’t already have URL Rewrite and ARR installed you can do so easily with the Web Platform Installer. A lot can be said about reverse proxies and many different situations and ways to route the traffic and handle different URL patterns. However, my goal here is to get you up and going in the easiest way possible. Then you can dig in deeper after you get the base configuration in place. URL Rewrite makes a reverse proxy very easy to set up. Note that the URL Rewrite Add Rules template doesn’t include Reverse Proxy at the server level. That’s not to say that you can’t create a server-level reverse proxy, but the URL Rewrite rules template doesn’t help you with that. Getting Started First you must create a website on your public web server that has the public bindings that you need. Alternately, you can use an existing site and route using conditions for certain traffic. After you’ve created your site then open up URL Rewrite at the site level. Using the “Add Rule(s)…” template that is opened from the right-hand actions pane, create a new Reverse Proxy rule. If you receive a prompt (the first time) that the proxy functionality needs to be enabled, select OK. This is telling you that a proxy can route traffic outside of your web server, which happens to be our goal in this case. Be aware that reverse proxy rules can be dangerous if you open sites from inside you network to the world, so just be aware of what you’re doing and why. The next and final step of the template asks a few questions. The first textbox asks the name of the internal web server. In our example, it’s 10.10.0.50:8111. This can be any URL, including a subfolder like internal.mysite.com/blog. Don’t include the http or https here. The template assumes that it’s not entered. You can choose whether to perform SSL Offloading or not. If you leave this checked then all requests to the internal server will be over HTTP regardless of the original web request. This can help with performance and SSL bindings if all requests are within a trusted network. If the network path between the two web servers is not completely trusted and safe then uncheck this. Next, the template enables you to create an outbound rule. This is used to rewrite links in the page to look like your public domain name rather than the internal domain name. Outbound rules have a lot of CPU overhead because the entire web content needs to be parsed and updated. However, if you need it, then it’s well worth the extra CPU hit on the web server. If you check the “Rewrite the domain names of the links in HTTP responses” checkbox then the From textbox will be filled in with what you entered for the inbound rule. You can enter your friendly public URL for the outbound rule. This will essentially replace any reference to 10.10.0.50:8111 (or whatever you enter) with tools.mysite.com in all <a>, <form>, and <img> tags on your site. That’s it! Well, there is a lot more that you can do, this but will give you the base configuration. You can now visit www.mysite.com on your public web server and it will serve up the site from your internal web server. You should see two rules show up; one inbound and one outbound. You can edit these, add conditions, and tweak them further as needed. One common issue that can occur without outbound rules has to do with compression. If you run into errors with the new proxied site, try turning off compression to confirm if that’s the issue. Here’s a link with details on how to deal with compression and outbound rules. I hope this was helpful to get started and to see how easy it is to create a simple reverse proxy using URL Rewrite for IIS.

  Read the article

• .NET Security Part 2

  - by Simon Cooper

  So, how do you create partial-trust appdomains? Where do you come across them? There are two main situations in which your assembly runs as partially-trusted using the Microsoft .NET stack: Creating a CLR assembly in SQL Server with anything other than the UNSAFE permission set. The permissions available in each permission set are given here. Loading an assembly in ASP.NET in any trust level other than Full. Information on ASP.NET trust levels can be found here. You can configure the specific permissions available to assemblies using ASP.NET policy files. Alternatively, you can create your own partially-trusted appdomain in code and directly control the permissions and the full-trust API available to the assemblies you load into the appdomain. This is the scenario I’ll be concentrating on in this post. Creating a partially-trusted appdomain There is a single overload of AppDomain.CreateDomain that allows you to specify the permissions granted to assemblies in that appdomain – this one. This is the only call that allows you to specify a PermissionSet for the domain. All the other calls simply use the permissions of the calling code. If the permissions are restricted, then the resulting appdomain is referred to as a sandboxed domain. There are three things you need to create a sandboxed domain: The specific permissions granted to all assemblies in the domain. The application base (aka working directory) of the domain. The list of assemblies that have full-trust if they are loaded into the sandboxed domain. The third item is what allows us to have a fully-trusted API that is callable by partially-trusted code. I’ll be looking at the details of this in a later post. Granting permissions to the appdomain Firstly, the permissions granted to the appdomain. This is encapsulated in a PermissionSet object, initialized either with no permissions or full-trust permissions. For sandboxed appdomains, the PermissionSet is initialized with no permissions, then you add permissions you want assemblies loaded into that appdomain to have by default: PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); // all assemblies need Execution permission to run at all restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); // grant general read access to C:\config.xml restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, @"C:\config.xml")); // grant permission to perform DNS lookups restrictedPerms.AddPermission( new DnsPermission(PermissionState.Unrestricted)); It’s important to point out that the permissions granted to an appdomain, and so to all assemblies loaded into that appdomain, are usable without needing to go through any SafeCritical code (see my last post if you’re unsure what SafeCritical code is). That is, partially-trusted code loaded into an appdomain with the above permissions (and so running under the Transparent security level) is able to create and manipulate a FileStream object to read from C:\config.xml directly. It is only for operations requiring permissions that are not granted to the appdomain that partially-trusted code is required to call a SafeCritical method that then asserts the missing permissions and performs the operation safely on behalf of the partially-trusted code. The application base of the domain This is simply set as a property on an AppDomainSetup object, and is used as the default directory assemblies are loaded from: AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = @"C:\temp\sandbox", }; If you’ve read the documentation around sandboxed appdomains, you’ll notice that it mentions a security hole if this parameter is set correctly. I’ll be looking at this, and other pitfalls, that will break the sandbox when using sandboxed appdomains, in a later post. Full-trust assemblies in the appdomain Finally, we need the strong names of the assemblies that, when loaded into the appdomain, will be run as full-trust, irregardless of the permissions specified on the appdomain. These assemblies will contain methods and classes decorated with SafeCritical and Critical attributes. I’ll be covering the details of creating full-trust APIs for partial-trust appdomains in a later post. This is how you get the strongnames of an assembly to be executed as full-trust in the sandbox: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); Creating the sandboxed appdomain So, putting these three together, you create the appdomain like so: AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); You can then load and execute assemblies in this appdomain like any other. For example, to load an assembly into the appdomain and get an instance of the Sandboxed.Entrypoint class, implementing IEntrypoint, you do this: IEntrypoint o = (IEntrypoint)sandbox.CreateInstanceFromAndUnwrap( "C:\temp\sandbox\SandboxedAssembly.dll", "Sandboxed.Entrypoint"); // call method the Execute method on this object within the sandbox o.Execute(); The second parameter to CreateDomain is for security evidence used in the appdomain. This was a feature of the .NET 2 security model, and has been (mostly) obsoleted in the .NET 4 model. Unless the evidence is needed elsewhere (eg. isolated storage), you can pass in null for this parameter. Conclusion That’s the basics of sandboxed appdomains. The most important object is the PermissionSet that defines the permissions available to assemblies running in the appdomain; it is this object that defines the appdomain as full or partial-trust. The appdomain also needs a default directory used for assembly lookups as the ApplicationBase parameter, and you can specify an optional list of the strongnames of assemblies that will be given full-trust permissions if they are loaded into the sandboxed appdomain. Next time, I’ll be looking closer at full-trust assemblies running in a sandboxed appdomain, and what you need to do to make an API available to partial-trust code.

  Read the article

• How do I prove or disprove "god" objects are wrong?

  - by honestduane

  Problem Summary: Long story short, I inherited a code base and an development team I am not allowed to replace and the use of God Objects is a big issue. Going forward, I want to have us re-factor things but I am getting push-back from the teams who want to do everything with God Objects "because its easier" and this means I would not be allowed to re-factor. I pushed back citing my years of dev experience, that I'm the new boss who was hired to know these things, etc, and so did the third party offshore companies account sales rep, and this is now at the executive level and my meeting is tomorrow and I want to go in with a lot of technical ammo to advocate best practices because I feel it will be cheaper in the long run (And I personally feel that is what the third party is worried about) for the company. My issue is from a technical level, I know its good long term but I'm having trouble with the ultra short term and 6 months term, and while its something I "know" I cant prove it with references and cited resources outside of one person (Robert C. Martin, aka Uncle Bob), as that is what I am being asked to do as I have been told having data from one person and only one person (Robert C Martin) is not good enough of an argument. Question: What are some resources I can cite directly (Title, year published, page number, quote) by well known experts in the field that explicitly say this use of "God" Objects/Classes/Systems is bad (or good, since we are looking for the most technically valid solution)? Research I have already done: I have a number of books here and I have searched their indexes for the use of the words "god object" and "god class". I found that oddly its almost never used and the copy of the GoF book I have for example, never uses it (At least according to the index in front of me) but I have found it in 2 books per the below, but I want more I can use. I checked the Wikipedia page for "God Object" and its currently a stub with little reference links so although I personally agree with that it says, It doesn't have much I can use in an environment where personal experience is not considered valid. The book cited is also considered too old to be valid by the people I am debating these technical points with as the argument they are making is that "it was once thought to be bad but nobody could prove it, and now modern software says "god" objects are good to use". I personally believe that this statement is incorrect, but I want to prove the truth, whatever it is. In Robert C Martin's "Agile Principles, Patterns, and Practices in C#" (ISBN: 0-13-185725-8, hardcover) where on page 266 it states "Everybody knows that god classes are a bad idea. We don't want to concentrate all the intelligence of a system into a single object or a single function. One of the goals of OOD is the partitioning and distribution of behavior into many classes and many function." -- And then goes on to say sometimes its better to use God Classes anyway sometimes (Citing micro-controllers as an example). In Robert C Martin's "Clean Code: A Handbook of Agile Software Craftsmanship" page 136 (And only this page) talks about the "God class" and calls it out as a prime example of a violation of the "classes should be small" rule he uses to promote the Single Responsibility Principle" starting on on page 138. The problem I have is all my references and citations come from the same person (Robert C. Martin), and am from the same single person/source. I am being told that because he is just one guy, my desire to not use "God Classes" is invalid and not accepted as a standard best practice in the software industry. Is this true? Am I doing things wrong from a technical perspective by trying to keep to the teaching of Uncle Bob? God Objects and Object Oriented Programming and Design: The more I think of this the more I think this is more something you learn when you study OOP and its never explicitly called out; Its implicit to good design is my thinking (Feel free to correct me, please, as I want to learn), The problem is I "know" this, but but not everybody does, so in this case its not considered a valid argument because I am effectively calling it out as universal truth when in fact most people are statistically ignorant of it since statistically most people are not programmers. Conclusion: I am at a loss on what to search for to get the best additional results to cite, since they are making a technical claim and I want to know the truth and be able to prove it with citations like a real engineer/scientist, even if I am biased against god objects due to my personal experience with code that used them. Any assistance or citations would be deeply appreciated.

  Read the article

• Configure IPv6 on your Linux system (Ubuntu)

  After the presentation on IPv6 at the first event of the Emtel Knowledge Series and some recent discussion on social media networks with other geeks and Linux interested IT people here in Mauritius, I thought that I should give it a try (finally) and tweak my local network infrastructure. Honestly, I have been to busy with contractual project work and it never really occurred to me to set up IPv6 in my LAN. Well, the following paragraphs are going to shed some light on those aspects of modern computer and network technology. This is the first article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. Let's embrace IPv6 The basic configuration on Linux is actually very simple as the kernel, operating system, and user-space programs support that protocol natively. If your system is ready to go for IP (aka: IPv4), then you are good to go for anything else. At least, I didn't have to install any additional packages on my system(s). We are going to assign a static IPv6 address to the system. Hence, we have to modify the definition of interfaces and check whether we have an inet6 entry specified. Open your favourite text editor and check the following entries (it should be at least similar to this): $ sudo nano /etc/network/interfaces auto eth0# IPv4 configurationiface eth0 inet static  address 192.168.1.2  network 192.168.1.0  netmask 255.255.255.0  broadcast 192.168.1.255# IPv6 configurationiface eth0 inet6 static  pre-up modprobe ipv6  address 2001:db8:bad:a55::2  netmask 64 Of course, you might have to adjust your interface device (eth0) or you might be interested to have multiple directives for additional devices (eth1, eth2, etc.). The auto instruction takes care that your device is enabled and configured during the booting phase. The use of the pre-up directive depends on your kernel configuration but in most scenarios this might be an optional line. Anyways, it doesn't hurt to have it enabled after all - just to be on the safe side. Next, either restart your network subsystem like so: $ sudo service networking restart Or you might prefer to do it manually with identical parameters, like so: $ sudo ifconfig eth0 inet6 add 2001:db8:bad:a55::2/64 In case that you're logged in remotely into your PC (ie. via ssh), it is highly advised to opt for the second choice and add the device manually. You can check your configuration afterwards with one of the following commands (depends on whether it is installed): $ sudo ifconfig eth0eth0      Link encap:Ethernet  HWaddr 00:21:5a:50:d7:94            inet addr:192.168.160.2  Bcast:192.168.160.255  Mask:255.255.255.0          inet6 addr: fe80::221:5aff:fe50:d794/64 Scope:Link          inet6 addr: 2001:db8:bad:a55::2/64 Scope:Global          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 $ sudo ip -6 address show eth03: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000    inet6 2001:db8:bad:a55::2/64 scope global        valid_lft forever preferred_lft forever    inet6 fe80::221:5aff:fe50:d794/64 scope link        valid_lft forever preferred_lft forever In both cases, it confirms that our network device has been assigned a valid IPv6 address. That's it in general for your setup on one system. But of course, you might be interested to enable more services for IPv6, especially if you're already running a couple of them in your IP network. More details are available on the official Ubuntu Wiki. Continue to configure your network to provide IPv6 address information automatically in your local infrastructure.

  Read the article

• How to build a Singleton-like dependency injector replacement (Php)

  - by Erparom

  I know out there are a lot of excelent containers, even frameworks almost entirely DI based with good strong IoC classes. However, this doesn't help me to "define" a new pattern. (This is Php code but understandable to anyone) Supose we have: //Declares the singleton class bookSingleton { private $author; private static $bookInstance; private static $isLoaned = FALSE; //The private constructor private function __constructor() { $this->author = "Onecrappy Writer Ofcheap Novels"; } //Sets the global isLoaned state and also gets self instance public static function loanBook() { if (self::$isLoaned === FALSE) { //Book already taken, so return false return FALSE; } else { //Ok, not loaned, lets instantiate (if needed and loan) if (!isset(self::$bookInstance)) { self::$bookInstance = new BookSingleton(); } self::$isLoaned = TRUE; } } //Return loaned state to false, so another book reader can take the book public function returnBook() { $self::$isLoaned = FALSE; } public function getAuthor() { return $this->author; } } Then we get the singelton consumtion class: //Consumes the Singleton class BookBorrower() { private $borrowedBook; private $haveBookState; public function __construct() { this->haveBookState = FALSE; } //Use the singelton-pattern behavior public function borrowBook() { $this->borrowedBook = BookSingleton::loanBook(); //Check if was successfully borrowed if (!this->borrowedBook) { $this->haveBookState = FALSE; } else { $this->haveBookState = TRUE; } } public function returnBook() { $this->borrowedBook->returnBook(); $this->haveBookState = FALSE; } public function getBook() { if ($this->haveBookState) { return "The book is loaned, the author is" . $this->borrowedbook->getAuthor(); } else { return "I don't have the book, perhaps someone else took it"; } } } At last, we got a client, to test the behavior function __autoload($class) { require_once $class . '.php'; } function write ($whatever,$breaks) { for($break = 0;$break<$breaks;$break++) { $whatever .= "\n"; } echo nl2br($whatever); } write("Begin Singleton test", 2); $borrowerJuan = new BookBorrower(); $borrowerPedro = new BookBorrower(); write("Juan asks for the book", 1); $borrowerJuan->borrowBook(); write("Book Borrowed? ", 1); write($borrowerJuan->getAuthorAndTitle(),2); write("Pedro asks for the book", 1); $borrowerPedro->borrowBook(); write("Book Borrowed? ", 1); write($borrowerPedro->getAuthorAndTitle(),2); write("Juan returns the book", 1); $borrowerJuan->returnBook(); write("Returned Book Juan? ", 1); write($borrowerJuan->getAuthorAndTitle(),2); write("Pedro asks again for the book", 1); $borrowerPedro->borrowBook(); write("Book Borrowed? ", 1); write($borrowerPedro->getAuthorAndTitle(),2); This will end up in the expected behavior: Begin Singleton test Juan asks for the book Book Borrowed? The book is loaned, the author is = Onecrappy Writer Ofcheap Novels Pedro asks for the book Book Borrowed? I don't have the book, perhaps someone else took it Juan returns the book Returned Book Juan? I don't have the book, perhaps someone else took it Pedro asks again for the book Book Borrowed? The book is loaned, the author is = Onecrappy Writer Ofcheap Novels So I want to make a pattern based on the DI technique able to do exactly the same, but without singleton pattern. As far as I'm aware, I KNOW I must inject the book inside "borrowBook" function instead of taking a static instance: public function borrowBook(BookNonSingleton $book) { if (isset($this->borrowedBook) || $book->isLoaned()) { $this->haveBook = FALSE; return FALSE; } else { $this->borrowedBook = $book; $this->haveBook = TRUE; return TRUE; } } And at the client, just handle the book: $borrowerJuan = new BookBorrower(); $borrowerJuan-borrowBook(new NonSingletonBook()); Etc... and so far so good, BUT... Im taking the responsability of "single instance" to the borrower, instead of keeping that responsability inside the NonSingletonBook, that since it has not anymore a private constructor, can be instantiated as many times... making instances on each call. So, What does my NonSingletonBook class MUST be in order to never allow borrowers to have this same book twice? (aka) keep the single instance. Because the dependency injector part of the code (borrower) does not solve me this AT ALL. Is it needed the container with an "asShared" method builder with static behavior? No way to encapsulate this functionallity into the Book itself? "Hey Im a book and I shouldn't be instantiated more than once, I'm unique"

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31  | Next Page >