Search Results

Search found 761 results on 31 pages for 'aka'.

Page 24/31 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• SQL Server Configuration timeouts - and a workaround [SSIS]

  - by jamiet

  Ever since I started writing SSIS packages back in 2004 I have opted to store configurations in .dtsConfig (.i.e. XML) files rather than in a SQL Server table (aka SQL Server Configurations) however recently I inherited some packages that used SQL Server Configurations and thus had to immerse myself in their murky little world. To all the people that have ever gone onto the SSIS forum and asked questions about ambiguous behaviour of SQL Server Configurations I now say this... I feel your pain! The biggest problem I have had was in dealing with the change to the order in which configurations get applied that came about in SSIS 2008. Those changes are detailed on MSDN at SSIS Package Configurations however the pertinent bits are: As the utility loads and runs the package, events occur in the following order: The dtexec utility loads the package. The utility applies the configurations that were specified in the package at design time and in the order that is specified in the package. (The one exception to this is the Parent Package Variables configurations. The utility applies these configurations only once and later in the process.) The utility then applies any options that you specified on the command line. The utility then reloads the configurations that were specified in the package at design time and in the order specified in the package. (Again, the exception to this rule is the Parent Package Variables configurations). The utility uses any command-line options that were specified to reload the configurations. Therefore, different values might be reloaded from a different location. The utility applies the Parent Package Variable configurations. The utility runs the package. To understand how these steps differ from SSIS 2005 I recommend reading Doug Laudenschlager’s blog post Understand how SSIS package configurations are applied. The very nature of SQL Server Configurations means that the Connection String for the database holding the configuration values needs to be supplied from the command-line. Typically then the call to execute your package resembles this: dtexec /FILE Package.dtsx /SET "\Package.Connections[SSISConfigurations].Properties[ConnectionString]";"\"Data Source=SomeServer;Initial Catalog=SomeDB;Integrated Security=SSPI;\"", The problem then is that, as per the steps above, the package will (1) attempt to apply all configurations using the Connection String stored in the package for the "SSISConfigurations" Connection Manager before then (2) applying the Connection String from the command-line and then (3) apply the same configurations all over again. In the packages that I inherited that first attempt to apply the configurations would timeout (not unexpected); I had 8 SQL Server Configurations in the package and thus the package was waiting for 2 minutes until all the Configurations timed out (i.e. 15seconds per Configuration) - in a package that only executes for ~8seconds when it gets to do its actual work a delay of 2minutes was simply unacceptable. We had three options in how to deal with this: Get rid of the use of SQL Server configurations and use .dtsConfig files instead Edit the packages when they get deployed Change the timeout on the "SSISConfigurations" Connection Manager #1 was my preferred choice but, for reasons I explain below*, wasn't an option in this particular instance. #2 was discounted out of hand because it negates the point of using Configurations in the first place. This left us with #3 - change the timeout on the Connection Manager. This is done by going into the properties of the Connection Manager, opening the "All" tab and changing the Connect Timeout property to some suitable value (in the screenshot below I chose 2 seconds). This change meant that the attempts to apply the SQL Server configurations timed out in 16 seconds rather than two minutes; clearly this isn't an optimum solution but its certainly better than it was. So there you have it - if you are having problems with SQL Server configuration timeouts within SSIS try changing the timeout of the Connection Manager. Better still - don't bother using SQL Server Configuration in the first place. Even better - install RC0 of SQL Server 2012 to start leveraging SSIS parameters and leave the nasty old world of configurations behind you. @Jamiet * Basically, we are leveraging a SSIS execution/logging framework in which the client had invested a lot of resources and SQL Server Configurations are an integral part of that.

  Read the article

• WIF, ADFS 2 and WCF&ndash;Part 4: Service Client (using Service Metadata)

  - by Your DisplayName here!

  See parts 1, 2 and 3 first. In this part we will finally build a client for our federated service. There are basically two ways to accomplish this. You can use the WCF built-in tooling to generate client and configuration via the service metadata (aka ‘Add Service Reference’). This requires no WIF on the client side. Another approach would be to use WIF’s WSTrustChannelFactory to manually talk to the ADFS 2 WS-Trust endpoints. This option gives you more flexibility, but is slightly more code to write. You also need WIF on the client which implies that you need to run on a WIF supported operating system – this rules out e.g. Windows XP clients. We’ll start with the metadata way. You simply create a new client project (e.g. a console app) – call ‘Add Service Reference’ and point the dialog to your service endpoint. What will happen then is, that VS will contact your service and read its metadata. Inside there is also a link to the metadata endpoint of ADFS 2. This one will be contacted next to find out which WS-Trust endpoints are available. The end result will be a client side proxy and a configuration file. Let’s first write some code to call the service and then have a closer look at the config file. var proxy = new ServiceClient(); proxy.GetClaims().ForEach(c =>     Console.WriteLine("{0}\n {1}\n  {2} ({3})\n",         c.ClaimType,         c.Value,         c.Issuer,         c.OriginalIssuer)); That’s all. The magic is happening in the configuration file. When you in inspect app.config, you can see the following general configuration hierarchy: <client /> element with service endpoint information federation binding and configuration containing ADFS 2 endpoint 1 (with binding and configuration) ADFS 2 endpoint n (with binding and configuration) (where ADFS 2 endpoint 1…n are the endpoints I talked about in part 1) You will see a number of <issuer /> elements in the binding configuration where simply the first endpoint from the ADFS 2 metadata becomes the default endpoint and all other endpoints and their configuration are commented out. You now need to find the endpoint you want to use (based on trust version, credential type and security mode) and replace that with the default endpoint. That’s it. When you call the WCF proxy, it will inspect configuration, then first contact the selected ADFS 2 endpoint to request a token. This token will then be used to authenticate against the service. In the next post I will show you the more manual approach using the WIF APIs.

  Read the article

• GPGPU

  WhatGPU obviously stands for Graphics Processing Unit (the silicon powering the display you are using to read this blog post). The extra GP in front of that stands for General Purpose computing.So, altogether GPGPU refers to computing we can perform on GPU for purposes beyond just drawing on the screen. In effect, we can use a GPGPU a bit like we already use a CPU: to perform some calculation (that doesn’t have to have any visual element to it). The attraction is that a GPGPU can be orders of magnitude faster than a CPU.WhyWhen I was at the SuperComputing conference in Portland last November, GPGPUs were all the rage. A quick online search reveals many articles introducing the GPGPU topic. I'll just share 3 here: pcper (ignoring all pages except the first, it is a good consumer perspective), gizmodo (nice take using mostly layman terms) and vizworld (answering the question on "what's the big deal").The GPGPU programming paradigm (from a high level) is simple: in your CPU program you define functions (aka kernels) that take some input, can perform the costly operation and return the output. The kernels are the things that execute on the GPGPU leveraging its power (and hence execute faster than what they could on the CPU) while the host CPU program waits for the results or asynchronously performs other tasks.However, GPGPUs have different characteristics to CPUs which means they are suitable only for certain classes of problem (i.e. data parallel algorithms) and not for others (e.g. algorithms with branching or recursion or other complex flow control). You also pay a high cost for transferring the input data from the CPU to the GPU (and vice versa the results back to the CPU), so the computation itself has to be long enough to justify the overhead transfer costs. If your problem space fits the criteria then you probably want to check out this technology.HowSo where can you get a graphics card to start playing with all this? At the time of writing, the two main vendors ATI (owned by AMD) and NVIDIA are the obvious players in this industry. You can read about GPGPU on this AMD page and also on this NVIDIA page. NVIDIA's website also has a free chapter on the topic from the "GPU Gems" book: A Toolkit for Computation on GPUs.If you followed the links above, then you've already come across some of the choices of programming models that are available today. Essentially, AMD is offering their ATI Stream technology accessible via a language they call Brook+; NVIDIA offers their CUDA platform which is accessible from CUDA C. Choosing either of those locks you into the GPU vendor and hence your code cannot run on systems with cards from the other vendor (e.g. imagine if your CPU code would run on Intel chips but not AMD chips). Having said that, both vendors plan to support a new emerging standard called OpenCL, which theoretically means your kernels can execute on any GPU that supports it. To learn more about all of these there is a website: gpgpu.org. The caveat about that site is that (currently) it completely ignores the Microsoft approach, which I touch on next.On Windows, there is already a cross-GPU-vendor way of programming GPUs and that is the DirectX API. Specifically, on Windows Vista and Windows 7, the DirectX 11 API offers a dedicated subset of the API for GPGPU programming: DirectCompute. You use this API on the CPU side, to set up and execute the kernels that run on the GPU. The kernels are written in a language called HLSL (High Level Shader Language). You can use DirectCompute with HLSL to write a "compute shader", which is the term DirectX uses for what I've been referring to in this post as a "kernel". For a comprehensive collection of links about this (including tutorials, videos and samples) please see my blog post: DirectCompute.Note that there are many efforts to build even higher level languages on top of DirectX that aim to expose GPGPU programming to a wider audience by making it as easy as today's mainstream programming models. I'll mention here just two of those efforts: Accelerator from MSR and Brahma by Ananth. Comments about this post welcome at the original blog.

  Read the article

• SQL SERVER – Merge Operations – Insert, Update, Delete in Single Execution

  - by pinaldave

  This blog post is written in response to T-SQL Tuesday hosted by Jorge Segarra (aka SQLChicken). I have been very active using these Merge operations in my development. However, I have found out from my consultancy work and friends that these amazing operations are not utilized by them most of the time. Here is my attempt to bring the necessity of using the Merge Operation to surface one more time. MERGE is a new feature that provides an efficient way to do multiple DML operations. In earlier versions of SQL Server, we had to write separate statements to INSERT, UPDATE, or DELETE data based on certain conditions; however, at present, by using the MERGE statement, we can include the logic of such data changes in one statement that even checks when the data is matched and then just update it, and similarly, when the data is unmatched, it is inserted. One of the most important advantages of MERGE statement is that the entire data are read and processed only once. In earlier versions, three different statements had to be written to process three different activities (INSERT, UPDATE or DELETE); however, by using MERGE statement, all the update activities can be done in one pass of database table. I have written about these Merge Operations earlier in my blog post over here SQL SERVER – 2008 – Introduction to Merge Statement – One Statement for INSERT, UPDATE, DELETE. I was asked by one of the readers that how do we know that this operator was doing everything in single pass and was not calling this Merge Operator multiple times. Let us run the same example which I have used earlier; I am listing the same here again for convenience. --Let’s create Student Details and StudentTotalMarks and inserted some records. USE tempdb GO CREATE TABLE StudentDetails ( StudentID INTEGER PRIMARY KEY, StudentName VARCHAR(15) ) GO INSERT INTO StudentDetails VALUES(1,'SMITH') INSERT INTO StudentDetails VALUES(2,'ALLEN') INSERT INTO StudentDetails VALUES(3,'JONES') INSERT INTO StudentDetails VALUES(4,'MARTIN') INSERT INTO StudentDetails VALUES(5,'JAMES') GO CREATE TABLE StudentTotalMarks ( StudentID INTEGER REFERENCES StudentDetails, StudentMarks INTEGER ) GO INSERT INTO StudentTotalMarks VALUES(1,230) INSERT INTO StudentTotalMarks VALUES(2,255) INSERT INTO StudentTotalMarks VALUES(3,200) GO -- Select from Table SELECT * FROM StudentDetails GO SELECT * FROM StudentTotalMarks GO -- Merge Statement MERGE StudentTotalMarks AS stm USING (SELECT StudentID,StudentName FROM StudentDetails) AS sd ON stm.StudentID = sd.StudentID WHEN MATCHED AND stm.StudentMarks > 250 THEN DELETE WHEN MATCHED THEN UPDATE SET stm.StudentMarks = stm.StudentMarks + 25 WHEN NOT MATCHED THEN INSERT(StudentID,StudentMarks) VALUES(sd.StudentID,25); GO -- Select from Table SELECT * FROM StudentDetails GO SELECT * FROM StudentTotalMarks GO -- Clean up DROP TABLE StudentDetails GO DROP TABLE StudentTotalMarks GO The Merge Join performs very well and the following result is obtained. Let us check the execution plan for the merge operator. You can click on following image to enlarge it. Let us evaluate the execution plan for the Table Merge Operator only. We can clearly see that the Number of Executions property suggests value 1. Which is quite clear that in a single PASS, the Merge Operation completes the operations of Insert, Update and Delete. I strongly suggest you all to use this operation, if possible, in your development. I have seen this operation implemented in many data warehousing applications. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Joins, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Merge

  Read the article

• UPK 3.6.1 (is Coming)

  - by marc.santosusso

  In anticipation of the release of UPK 3.6.1, I'd like to briefly describe some of the features that will be available in this new version. Topic Editor in Tabs Topic Editors now open in tabs instead of separate Developer windows. This offers several improvements: First, the bubble editor can be docked and resized in the same way as other editor panes. That's right, you can resize the bubble editor! The second enhancement that this changes brings is an improved undo and redo which allows each action to be undone and redone in the Topic Editor. New Sound Editor The topic and web page editors include a new sound editor with all the bells and whistles necessary to record, edit, import, and export, sound. Sound can be captured during topic recording--which is great for a Subject Matter Expert (SME) to narrate what they're recording--or after the topic has been recorded. Sound can also be added to web pages and played on the concept panes of modules, sections and topics. Turn off bubbles in Topics Authors may opt to hide bubbles either per frame or for an entire topic. When you want to draw a user's attention to the content on the screen instead of the bubble. This feature works extremely well in conjunction with the new sound capabilities. For instance, consider recording conceptual information with narration and no bubbles. Presentation Output UPK content can be published as a Presentation in Microsoft PowerPoint format. Publishing for Presentation will create a presentation for each topic published. The presentation template can be customized Using the same methods offered for the UPK document outputs, allowing your UPK-generated presentations to match your corporate branding. Autosave and Recovery The Developer will automatically save your work as often as you would like. This affords authors the ability to recover these automatically saved documents if their system or UPK were to close unexpectedly. The Developer defaults to save open documents every ten minutes. Package Editor Enhancement Files in packages will now open in the associated application when double-clicked. Authors can also choose to "Open with..." from the context menu (AKA right click menu.) See It! Window See It! mode may now be launched in a non-fullscreen window. This is available from the kp.html file in any Player package. This version of See It! mode offers on-screen navigation controls including previous frame, next frame, pause etc. Firefox Enhancments The UPK Player will now offer both Do It! mode and sound playback when viewed using Firefox web browser. Player Support for Safari The UPK Player is now fully supported on the Safari web browser for both Mac OS and Windows platforms. Keep document checked out Authors may choose to keep a document checked out when performing a check in. This allows an author to have a new version created on the server and continue editing. Close button on individual tabs A close button has been added to the tabs making it easier to close a specific tab. Outline Editor Enhancements Authors will have the option to prevent concepts from immediately displaying in the Developer when an outline item is selected. This makes it faster to move around in the outline editor. Tell us which feature you're most excited to use in the comments.

  Read the article

• SOA Suite 11g Asynchronous Testing with soapUI

  - by Greg Mally

  Overview The Enterprise Manager test harness that comes bundled with SOA Suite 11g is a great tool for doing smoke tests and some minor load testing. When a more robust testing tool is needed, often times soapUI is leveraged for many reasons ranging from ease of use to cost effective. However, when you want to start doing some more complex testing other than synchronous web services with static content, then the free version of soapUI becomes a bit more challenging. In this blog I will show you how to test asynchronous web services with soapUI free edition. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/ Asynchronous Web Service Testing in soapUI When invoking an asynchronous web service, the caller must provide a callback for the response. Since our testing will originate from soapUI, then it is only natural that soapUI would provide the callback mechanism. This mechanism in soapUI is called a MockService. In a nutshell, a soapUI MockService is a simulation of a Web Service (aka, a process listening on a port). We will go through the steps in setting up the MockService for a simple asynchronous BPEL process. After creating your soapUI project based on an asynchronous BPEL process, you will see something like the following: Notice that soapUI created an interface for both the request and the response (i.e., callback). The interface that was created for the callback will be used to create the MockService. Right-click on the callback interface and select the Generate MockService menu item: You will be presented with the Generate MockService dialogue where we will tweak the Path and possibly the port (depends upon what ports are available on the machine where soapUI will be running). We will adjust the Path to include the operation name (append /processResponse in this example) and the port of 8088 is fine: Once the MockService is created, you should have something like the following in soapUI: This window acts as a console/view into the callback process. When the play button is pressed (green triangle in the upper left-hand corner), soapUI will start a process running on the configured Port that will accept web service invocations on the configured Path: At this point we are “almost” ready to try out the asynchronous test. But first we must provide the web service addressing (WS-A) configuration on the request message. We will edit the message for the request interface that was generated when the project was created (SimpleAsyncBPELProcessBinding > process > Request 1 in this example). At the bottom of the request message editor you will find the WS-A configuration by left-clicking on the WS-A label: Here we will setup WS-A by changing the default values to: Must understand: TRUE Add default wsa:Action: Add default wsa:Action (checked) Reply to: ${host where soapUI is running}:${MockService Port}${MockService Path} … in this example: http://192.168.1.181:8088/mockSimpleAsyncBPELProcessCallbackBinding/processResponse We now are ready to run the asynchronous test from soapUI free edition. Make sure that the MockService you created is running and then push the play button for the request (green triangle in the upper left-hand corner of the request editor). If everything is configured correctly, you should see the response show up in the MockService window: To view the response message/payload, just double-click on a response message in the Message Log window of the MockService: At this point you can now expand the project to include a Test Suite for some load balance tests etc. This same topic has been covered in various detail on other sites/blogs, but I wanted to simplify and detail how this is done in the context of SOA Suite 11g. It also serves as a nice introduction to another blog of mine: SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition.

  Read the article

• Pet Store Loyalty Programs: I'm Not Loyal Yet!

  - by ruth.donohue

  After two years of constantly being asked (aka "pestered) by my now eight-year-old daughter for a dog (or any pet that is more interactive than a goldfish), I've finally compromised with a hamster purely by chance. Friends of ours had recently brought home a female hamster, and (surprise, surprise) two weeks later, they were looking for homes for 11 baby hamster pups. Since the pups were not yet ready to be weaned from their mother, my daughter and I had several weeks to get ready -- and we spent that extra time visiting a number of local pet stores and purchasing an assortment of hamster books, toys, exercise equipment, food, bedding, and cage -- not cheap! Now, I'm usually an online shopper (i.e. I love reading user reviews and comparing prices), but for kids, there is absolutely no online substitute for actually walking into a store and physically picking out something you want. We have two competing pet shops within close proximity to where we live, and I signed up for their rewards programs to get discounts on select items. I'm sure it takes a while to get my data into the system (after all, I did fill out a form the old-fashioned way), but as it has been more than two weeks for one store and over a week for the other, the window of opportunity is getting smaller as we by now pretty much have most of what we think we need. Everything I've purchased has been purely hamster or small animal related, so in an ideal world, the stores would have me easily figured out as a hamster owner. Here is what I would be expecting of a loyalty rewards program: Point me to some useful links, either information provied by the company or external websites where I can learn more. Any value-add a business can provide to make my life easier makes me a much more loyal customer. What things can I expect as a new pet owner? Any hamster communities? Any hamster-related events? Any vets that specialize in small animals in the vicinity? Send me an email with other related products I may be interested in. Upsell and cross-sell to me. We've go the basics and a couple of luxuries, but at this point, I'm pretty excited (surprisingly) about the hamster, and my daughter is footing the bill with her birthday and Christmas money. She and I would be more than happy to spend her money! Get this information to me faster. As I mentioned, my window of opportunity is getting smaller, as eithe rmy daughter's money will run out on other things or we'll start losing the thrill of buying new hamster toys and treats. I realize this is easier said than done, and undoubtedly, the stores are getting value knowing my basic customer information and purchase history. Buth, they could really benefit by delivering a loyalty program that really earned my loyalty. "Goldeen" needs a new water bottle, yogurt chips, and chew toys as he doesn't seem to like the ones we bought. So for now, I'll just go to whichever store is the most convenient. Oh, and just for fun (not related to this post), here are a couple of videos my daughter really got a kick out of watching: Hamster on a Piano Tic in a Spin-Dryer

  Read the article

• Java Spotlight Episode 57: Live From #Devoxx - Ben Evans and Martijn Verburg of the London JUG with Yara Senger of SouJava

  - by Roger Brinkley

  Tweet Live from Devoxx 11,  an interview with Ben Evans and Martijn Verburg from the London JUG along with  Yara Senger from the SouJava JUG on the JCP Executive Committee Elections, JSR 248, and Adopt-a-JSR program. Both the London JUG and SouJava JUG are JCP Standard Edition Executive Committee Members. Joining us this week on the Java All Star Developer Panel are Geertjan Wielenga, Principal Product Manger in Oracle Developer Tools; Stephen Chin, Java Champion and Java FX expert; and Antonio Goncalves, Paris JUG leader. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Netbeans 7.1 JDK 7 upgrade tools Netbeans First Patch Program OpenJFX approved as an OpenJDK project Devoxx France April 18-20, 2012 Events Nov 22-25, OTN Developer Days in the Nordics Nov 22-23, Goto Conference, Prague Dec 6-8, Java One Brazil, Sao Paulo Feature interview Ben Evans has lived in "Interesting Times" in technology - he was the lead performance testing engineer for the Google IPO, worked on the initial UK trials of 3G networks with BT, built award-winning websites for some of Hollywood's biggest hits of the 90s, rearchitected and reimagined technology helping some of the most vulnerable people in the UK and has worked on everything from some of the UKs very first ecommerce sites, through to multi-billion dollar currency trading systems. He helps to run the London Java Community, and represents the JUG on the Java SE/EE Executive Committee. His first book "The Well-Grounded Java Developer" (with Martijn Verburg) has just been published by Manning. Martijn Verburg (aka 'the Diabolical Developer') herds Cats in the Java/open source communities and is constantly humbled by the creative power to be found there. Currently he resides in London where he co-leads the London JUG (a JCP EC member), runs a couple of open source projects & drinks too much beer at his local pub. You can find him online moderating at the Javaranch or discussing (ranting?) subjects on the Prgorammers Stack Exchange site. Most recently he's become a regular speaker at conferences on Java, open source and software development and has recently wrapped up his first Manning title - "The Well-Grounded Java Developer" with his co-author Ben Evans. Yara Senger is the partner and director of teacher education and Globalcode, graduated from the University of Sao Paulo, Sao Carlos, has significant experience in Brazil and abroad in developing solutions to critical Java. She is the co-creator of Java programs Academy and Academy of Web Developer, accumulating over 1000 hours in the classroom teaching Java. She currently serves as the President of Sou Java. In this interview Ben, Martijn, and Yara talk about the JCP Executive Committee Elections, JSR 348, and the Adopt-a-JSR program. Mail Bag What's Cool Show Transcripts Transcript for this show is available here when available.

  Read the article

• ASP.NET MVC, Web API, Razor and Open Source

  - by ScottGu

  Microsoft has made the source code of ASP.NET MVC available under an open source license since the first V1 release. We’ve also integrated a number of great open source technologies into the product, and now ship jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js and JSON.NET as part of it. I’m very excited to announce today that we will also release the source code for ASP.NET Web API and ASP.NET Web Pages (aka Razor) under an open source license (Apache 2.0), and that we will increase the development transparency of all three projects by hosting their code repositories on CodePlex (using the new Git support announced last week). Doing so will enable a more open development model where everyone in the community will be able to engage and provide feedback on code checkins, bug-fixes, new feature development, and build and test the products on a daily basis using the most up-to-date version of the source code and tests. We will also for the first time allow developers outside of Microsoft to submit patches and code contributions that the Microsoft development team will review for potential inclusion in the products. We announced a similar open development approach with the Windows Azure SDK last December, and have found it to be a great way to build an even tighter feedback loop with developers – and ultimately deliver even better products as a result. Very importantly - ASP.NET MVC, Web API and Razor will continue to be fully supported Microsoft products that ship both standalone as well as part of Visual Studio (the same as they do today). They will also continue to be staffed by the same Microsoft developers that build them today (in fact, we have more Microsoft developers working on the ASP.NET team now than ever before). Our goal with today’s announcement is to increase the feedback loop on the products even more, and allow us to deliver even better products.  We are really excited about the improvements this will bring. Learn More You can now browse, sync and build the source tree of ASP.NET MVC, Web API, and Razor on the http://aspnetwebstack.codeplex.com web-site.  The Git repository on the site is the live RC milestone development tree that the team has been working on the last several weeks, and the tree contains both the runtime sources + tests, and is buildable and testable by anyone.  Because the binaries produced are bin-deployable, this allows you to compile your own builds and try product updates out as soon as they are checked-in. You can also now contribute directly to the development of the products by reviewing and sending feedback on code checkins, submitting bugs and helping us verify fixes as they are checked in, suggesting and giving feedback on new features as they are implemented, as well as by submitting code fixes or code contributions of your own. Note that all code submissions will be rigorously reviewed and tested by the ASP.NET MVC Team, and only those that meet an extremely high bar for both quality and design/roadmap appropriateness will be merged into the source. Summary All of us on the team are really excited about today’s announcement – it has been something we’ve been working toward for many years.  The tighter feedback loop is going to enable us to build even better products, and take ASP.NET to the next level in terms of innovation and customer focus. Thanks, Scott P.S. In addition to blogging, I use Twitter to-do quick posts and share links. My Twitter handle is: @scottgu

  Read the article

• Inside Red Gate - The Office

  - by Simon Cooper

  The vast majority of Red Gate is on the first and second floors (the second and third floors in US parlance) of an office building in Cambridge Business Park (here we are!). As you can see, the building is split into three sections; the two wings, and the section between them. As well as being organisationally separate, the four divisions are also split up in the office; each division has it's own floor and wing, so everyone in the division is working together in the same area (.NET and DBA on the left, SQL Tools and New Business on the right). The non-divisional parts of the business share wings with the smaller divisions, again keeping each group together. The canteen One of the downsides of divisionalisation is that communication between people in different decisions is greatly reduced. This is where the canteen (aka the SQL Servery) comes in. Occupying most of the central section on the first floor, the canteen provides free cooked lunch every day, and is where everyone in the company gathers for lunch. The idea is to encourage communication between the divisions; having lunch with people in a different division you wouldn't otherwise talk to helps people keep track of what's going on elsewhere in the company. (I'm still amazed at how the canteen staff provide a wide range of superbly cooked food for over 200 people out of a kitchen in which, if you were to swing a cat, it would get severe head injuries.). There's also table tennis and table football tables that anyone can use, provided you can grab them when they're free! Office layout Cubicles are practically unheard of in the UK, and no one, including the CEOs, has separate offices. The entire office is open-plan, as you can see in this youtube video from when we first moved in (although all the empty desks are now full!). Neil & Simon, instead of having dedicated offices, move between the different divisions every few months to keep up to date with what's going on around the company; sitting with a division gives you a much better overall impression of how the division's doing than written status reports from the division heads. There's also the usual plethora of meeting rooms scattered around the place; when we first moved in in 2009 we had a competition to name them all. We've got Afoxalypse A & B, Seagulls A & B, Traffic Jam, Thinking Hats, Camelids A & B, Horses, etc. All the meeting rooms have pictures on the walls corresponding to their theme, which adds a nice bit of individuality to otherwise fairly drab meeting rooms. Generally, any meeting room can be booked by anyone at any time, although some groups have priority in certain rooms (Camelids B is used a lot for UX testing, the Interview Room is used for, well, interviews). And, as you can see from the video, each area has various pictures, post-its, notes, signs, on the walls to try and stop it being a dull office space. Yes, it's still an office, but it's designed to be as interesting and as individual as possible.

  Read the article

• concurrency::accelerator_view

  - by Daniel Moth

  Overview We saw previously that accelerator represents a target for our C++ AMP computation or memory allocation and that there is a notion of a default accelerator. We ended that post by introducing how one can obtain accelerator_view objects from an accelerator object through the accelerator class's default_view property and the create_view method. The accelerator_view objects can be thought of as handles to an accelerator. You can also construct an accelerator_view given another accelerator_view (through the copy constructor or the assignment operator overload). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator_view objects between them to determine if they refer to the same underlying accelerator. We'll see later that when we use concurrency::array objects, the allocation of data takes place on an accelerator at array construction time, so there is a constructor overload that accepts an accelerator_view object. We'll also see later that a new concurrency::parallel_for_each function overload can take an accelerator_view object, so it knows on what target to execute the computation (represented by a lambda that the parallel_for_each also accepts). Beyond normal usage, accelerator_view is a quality of service concept that offers isolation to multiple "consumers" of an accelerator. If in your code you are accessing the accelerator from multiple threads (or, in general, from different parts of your app), then you'll want to create separate accelerator_view objects for each thread. flush, wait, and queuing_mode When you create an accelerator_view via the create_view method of the accelerator, you pass in an option of immediate or deferred, which are the two members of the queuing_mode enum. At any point you can access this value from the queuing_mode property of the accelerator_view. When the queuing_mode value is immediate (which is the default), any commands sent to the device such as kernel invocations and data transfers (e.g. parallel_for_each and copy, as we'll see in future posts), will get submitted as soon as the runtime sees fit (that is the definition of immediate). When the value of queuing_mode is deferred, the commands will be batched up. To send all buffered commands to the device for execution, there is a non-blocking flush method that you can call. If you wish to block until all the commands have been sent, there is a wait method you can call. Deferring is a more advanced scenario aimed at performance gains when you are submitting many device commands and you want to avoid the tiny overhead of flushing/submitting each command separately. Querying information Just like accelerator, accelerator_view exposes the is_debug and version properties. In fact, you can always access the accelerator object from the accelerator property on the accelerator_view class to access the accelerator interface we looked at previously. Interop with D3D (aka DX) In a later post I'll show an example of an app that uses C++ AMP to compute data that is used in pixel shaders. In those scenarios, you can benefit by integrating C++ AMP into your graphics pipeline and one of the building blocks for that is being able to use the same device context from both the compute kernel and the other shaders. You can do that by going from accelerator_view to device context (and vice versa), through part of our interop API in amp.h: *get_device, create_accelerator_view. More on those in a later post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Archiving SQLHelp tweets

  - by jamiet

  #SQLHelp is a Twitter hashtag that can be used by any Twitter user to get help from the SQL Server community. I think its fair to say that in its first year of being it has proved to be a very useful resource however Kendra Little (@kendra_little) made a very salient point yesterday when she tweeted: Is there a way to search the archives of #sqlhelp Trying to remember answer to a question I know I saw a couple months ago http://twitter.com/#!/Kendra_Little/status/15538234184441856 This highlights an inherent problem with Twitter’s search capability – it simply does not reach far enough back in time. I have made steps to remedy that situation by putting into place two initiatives to archive Tweets that contain the #sqlhelp hashtag. The Archivist http://archivist.visitmix.com/ is a free service that, quite simply, archives a history of tweets that contain a given search term by periodically polling Twitter’s search service with that search term and subsequently displaying a dashboard providing an aggregate view of those tweets for things like tweet volume over time, top users and top words (Archivist FAQ). I have set up an archive on The Archivist for “sqlhelp” which you can view at http://archivist.visitmix.com/jamiet/7. Here is a screenshot of the SQLHelp dashboard 36 minutes after I set it up: There is lots of good information in there, including the fact that Jonathan Kehayias (@SQLSarg) is the most active SQLHelp tweeter (I suspect as an answerer rather than a questioner ) and that SSIS has proven to be a rather (ahem) popular subject!! Datasift The Archivist has its uses though for our purposes it has a couple of downsides. For starters you cannot search through an archive (which is what Kendra was after) and nor can you export the contents of the archive for offline analysis. For those functions we need something a bit more heavyweight and for that I present to you Datasift. Datasift is a tool (currently an alpha release) that allows you to search for tweets and provide them through an object called a Datasift stream. That sounds very similar to normal Twitter search though it has one distinct advantage that other Twitter search tools do not – Datasift has access to Twitter’s Streaming API (aka the Twitter Firehose). In addition it has access to a lot of other rather nice features: It provides the Datasift API that allows you to consume the output of a Datasift stream in your tool of choice (bring on my favourite ultimate mashup tool J ) It has a query language (called Filtered Stream Definition Language – FSDL for short) A Datasift stream can consume (and filter) other Datasift streams Datasift can (and does) consume services other than Twitter If I refer to Datasift as “ETL for tweets” then you may get some sort of idea what it is all about. Just as I did with The Archivist I have set up a publicly available Datasift stream for “sqlhelp” at http://datasift.net/stream/1581/sqlhelp. Here is the FSDL query that provides the data: twitter.text contains "sqlhelp" Pretty simple eh? At the current time it provides little more than a rudimentary dashboard but as Datasift is currently an alpha release I think this may be worth keeping an eye on. The real value though is the ability to consume the output of a stream via Datasift’s RESTful API, observe: http://api.datasift.net/stream.xml?stream_identifier=c7015255f07e982afdeebdf1ae6e3c0d&username=jamiet&api_key=XXXXXXX (Note that an api_key is required during the alpha period so, given that I’m not supplying my api_key, this URI will not work for you) Just to prove that a Datasift stream can indeed consume data from another stream I have set up a second stream that further filters the first one for tweets containing “SSIS”. That one is at http://datasift.net/stream/1586/ssis-sqlhelp and here is the FSDL query: rule "414c9845685ff8d2548999cf3162e897" and (interaction.content contains "ssis") When Datasift moves beyond alpha I’ll re-assess how useful this is going to be and post a follow-up blog. @Jamiet

  Read the article

• Implementing Database Settings Using Policy Based Management

  - by Ashish Kumar Mehta

  Introduction Database Administrators have always had a tough time to ensuring that all the SQL Servers administered by them are configured according to the policies and standards of organization. Using SQL Server’s  Policy Based Management feature DBAs can now manage one or more instances of SQL Server 2008 and check for policy compliance issues. In this article we will utilize Policy Based Management (aka Declarative Management Framework or DMF) feature of SQL Server to implement and verify database settings on all production databases. It is best practice to enforce the below settings on each Production database. However, it can be tedious to go through each database and then check whether the below database settings are implemented across databases. In this article I will explain it to you how to utilize the Policy Based Management Feature of SQL Server 2008 to create a policy to verify these settings on all databases and in cases of non-complaince how to bring them back into complaince. Database setting to enforce on each user database : Auto Close and Auto Shrink Properties of database set to False Auto Create Statistics and Auto Update Statistics set to True Compatibility Level of all the user database set as 100 Page Verify set as CHECKSUM Recovery Model of all user database set to Full Restrict Access set as MULTI_USER Configure a Policy to Verify Database Settings 1. Connect to SQL Server 2008 Instance using SQL Server Management Studio 2. In the Object Explorer, Click on Management > Policy Management and you will be able to see Policies, Conditions & Facets as child nodes 3. Right click Policies and then select New Policy…. from the drop down list as shown in the snippet below to open the  Create New Policy Popup window. 4. In the Create New Policy popup window you need to provide the name of the policy as “Implementing and Verify Database Settings for Production Databases” and then click the drop down list under Check Condition. As highlighted in the snippet below click on the New Condition… option to open up the Create New Condition window. 5. In the Create New Condition popup window you need to provide the name of the condition as “Verify and Change Database Settings”. In the Facet drop down list you need to choose the Facet as Database Options as shown in the snippet below. Under Expression you need to select Field value as @AutoClose and then choose Operator value as ‘ = ‘ and finally choose Value as False. Now that you have successfully added the first field you can now go ahead and add rest of the fields as shown in the snippet below. Once you have successfully added all the above shown fields of Database Options Facet, click OK to save the changes and to return to the parent Create New Policy – Implementing and Verify Database Settings for Production Database windows where you will see that the newly created condition “Verify and Change Database Settings” is selected by default. Continues…

  Read the article

• Some thoughts on email hosting for one’s own domain

  - by jamiet

  I have used the same email providers for my own domains for a few years now however I am considering moving over to a new provider. In this email I’ll share my current thoughts and hopefully I’ll get some feedback that might help me to decide on what to do next. What I use today I have three email addresses that I use primarily (I have changed the domains in this blog post as I don’t want to give them away to spammers): [email protected] – My personal account that I give out to family and friends and which I use to register on websites [email protected]  - An account that I use to catch email from the numerous mailing lists that I am on [email protected] – I am a self-employed consultant so this is an account that I hand out to my clients, my accountant, and other work-related organisations Those two domains (jtpersonaldomain.com & jtworkdomain.com) are both managed at http://domains.live.com which is a fantastic service provided by Microsoft that for some perplexing reason they never bother telling anyone about. It offers multiple accounts (I have seven at jtpersonaldomain.com though as already stated I only use two of them) which are accessed via Outlook.com (formerly Hotmail.com) along with usage reporting plus a few other odds and sods that I never use. Best of all though, its totally free. In addition, given that I have got both domains hosted using http://domains.live.com I can link my various accounts together and switch between them at Outlook.com without having to login and logout: N.B. You’ll notice that there are two other accounts listed there in addition to the three I already mentioned. One is my mum’s account which helps me provide IT support/spam filtering services to her and the other is the donation account for AdventureWorks on Azure. I find that linking feature to be very handy indeed. Finally, http://domains.live.com is the epitome of “it just works”. I set up jtworkdomain.com at http://domains.live.com over three years ago and I am pretty certain I haven’t been back there even once to administer it. Proposed changes OK, so if I like http://domains.live.com so much why am I considering changing? Well, I earn my corn in the Microsoft ecosystem and if I’m reading the tea-leaves correctly its looking increasingly likely that the services that I’m going to have to be familiar with in the future are all going to be running on top of and alongside Windows Azure Active Directory and Office 365 respectively. Its clear to me that Microsoft’s are pushing their customers toward cloud services and, like it or lump it, data integration developers like me may have to come along for the ride. I don’t think the day is too far off when we can log into Windows Azure SQL Database (aka SQL Azure), Team Foundation Service, Dynamics etc… using the same credentials that are currently used for Office 365 and over time I would expect those things to get integrated together a lot better – that integration will be based upon a Windows Azure Active Directory identity. This should not come as a surprise, in my opinion Microsoft’s whole enterprise play over the past 15 or 20 years can be neatly surmised as “get people onto Windows Server and Active Directory then upsell from there” – in the not-too-distant-future the only difference is that they’re trying to do it in the cloud. I want to get familiar with these services and hence I am considering moving jtworkdomain.com onto Office 365. I’ll lose the convenience of easily being able to switch to that account at Outlook.com and moreover I’ll have to start paying for it (I think it’ll be about fifty quid a year – not a massive amount but its quite a bit more than free) but increasingly this is beginning to look like a move I have to make. So that’s where my head is at right now. Anyone have any relevant thoughts or experiences to share? Please let me know in the comments below. @Jamiet

  Read the article

• Announcement: Employee Info Starter Kit (v5.0) is Released

  - by Mohammad Ashraful Alam

  Ever wanted to have a simple jQuery menu bound with ASP.NET web site map file? Ever wanted to have cool css design stuffs implemented on your ASP.NET data bound controls? Ever wanted to let Visual Studio generate logical layers for you, which can be easily tested, customized and bound with ASP.NET data controls? If your answers with respect to above questions are ‘yes’, then you will probably happy to try out latest release (v5.0) of Employee Starter Kit, which is intended to address different types of real world challenges faced by web application developers when performing common CRUD operations. Using a single database table ‘Employee’, the current release illustrates how to utilize Microsoft ASP.NET 4.0 Web Form Data Controls, Entity Framework 4.0 and Visual Studio 2010 effectively in that context. Employee Info Starter Kit is an open source ASP.NET project template that is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule, where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. This project template is titled as “Employee Info Starter Kit”, which was initially hosted on Microsoft Code Gallery and been downloaded 1, 50,000+ of copies afterword.  The latest version of this starter kit is hosted in Codeplex. Release Highlights User End Functional Specification The user end functionalities of this starter kit are pretty simple and straight forward that are focused in to perform CRUD operation on employee records as described below. Creating a new employee record Read existing employee records Update an existing employee record Delete existing employee records Architectural Overview Simple 3 layer architecture (presentation, business logic and data access layer) ASP.NET web form based user interface Built-in code generators for logical layers, implemented in Visual Studio default template engine (T4) Built-in Entity Framework entities as business entities (aka: data containers) Data Mapper design pattern based Data Access Layer, implemented in C# and Entity Framework Domain Model design pattern based Business Logic Layer, implemented in C# Object Model for Cross Cutting Concerns (such as validation, logging, exception management) Minimum System Requirements Visual Studio 2010 (Web Developer Express Edition) or higher Sql Server 2005 (Express Edition) or higher Technology Utilized Programming Languages/Scripts Browser side: JavaScript Web server side: C# Code Generation Template: T-4 Template Frameworks .NET Framework 4.0 JavaScript Framework: jQuery 1.5.1 CSS Framework: 960 grid system .NET Framework Components .NET Entity Framework .NET Optional/Named Parameters (new in .net 4.0) .NET Tuple (new in .net 4.0) .NET Extension Method .NET Lambda Expressions .NET Anonymous Type .NET Query Expressions .NET Automatically Implemented Properties .NET LINQ .NET Partial Classes and Methods .NET Generic Type .NET Nullable Type ASP.NET Meta Description and Keyword Support (new in .net 4.0) ASP.NET Routing (new in .net 4.0) ASP.NET Grid View (CSS support for sorting - (new in .net 4.0)) ASP.NET Repeater ASP.NET Form View ASP.NET Login View ASP.NET Site Map Path ASP.NET Skin ASP.NET Theme ASP.NET Master Page ASP.NET Object Data Source ASP.NET Role Based Security Getting Started Guide To see Employee Info Starter Kit in action is pretty easy! Download the latest version. Extract the file. From the extracted folder click the C# project file (Eisk.Web.csproj) to open it in Visual Studio 2010 Hit Ctrl+F5! The current release (v5.0) of Employee Info Starter Kit is properly packaged, fully documented and well tested. If you want to learn more about it in details, just check the following links: Release Home Page Installation Walkthrough Hand on Coding Walkthrough Technical Reference Enjoy!

  Read the article

• Welcome 2011

  - by WeigeltRo

  Things that happened in 2010 MIX10 was absolutely fantastic. Read my report of MIX10 to see why.   The dotnet Cologne 2010, the community conference organized by the .NET user group Köln and my own group Bonn-to-Code.Net became an even bigger success than I dared to dream of.   There was a huge discrepancy between the efforts by Microsoft to support .NET user groups to organize public live streaming events of the PDC keynote (the dotnet Cologne team joined forces with netug  Niederrhein to organize the PDCologne) and the actual content of the keynote. The reaction of the audience at our event was “meh” and even worse I seriously doubt we’ll ever get that number of people to such an event (which on top of that suffered from technical difficulties beyond our control).   What definitely would have deserved the public live streaming event treatment was the Silverlight Firestarter (aka “Silverlight Damage Control”) event. And maybe we would have thought about organizing something if it weren’t for the “burned earth” left by the PDC keynote. Anyway, the stuff shown at the firestarter keynote was the topic of conversations among colleagues days later (“did you see that? oh yeah, that was seriously cool”). Things that I have learned/observed/noticed in 2010 In the long run, there’s a huge difference between “It works pretty well” and “it just works and I never have to think about it”. I had to get rid of my USB graphics adapter powering the third monitor (read about it in this blog post). Various small issues (desktop icons sometimes moving their positions after a reboot for no apparent reasons, at least one game I couldn’t get run at all, all three monitors sometimes simply refusing to wake up after standby) finally made me buy a PCIe 1x graphics adapter. If you’re interested: The combination of a NVIDIA GTX 460 and a GT 220 is running in “don’t make me think” mode for a couple of months now.   PowerPoint 2010 is a seriously cool piece of software. Not only the new hardware-accelerated effects, but also features like built-in background removal and picture processing (which in many cases are simply “good enough” and save a lot of time) or the smart guides.   Outlook 2010 crashes on me a lot. I haven’t been successful in reproducing these crashes, they just happen when every couple of days on different occasions (only thing in common: I clicked something in the main window – yeah, very helpful observation)   Visual Studio 2010 reminds me of Visual Studio 2005 before SP1, which is actually not a good thing to say about a piece of software. I think it’s telling that Microsoft’s message regarding the beta of SP1 has been different from earlier service pack betas (promising an upgrade path for a beta to the RTM sounds to me like “please, please use it NOW!”).   I have a love/hate relationship with ReSharper. I don’t want to develop without it, but at the same time I can’t fail to notice that ReSharper is taking a heavy toll in terms of performance and sometimes stability. Things I’m looking forward to in 2011 Obviously, the dotnet Cologne 2011. We already have been able to score some big name sponsors (Microsoft, Intel), but we’re still looking for more sponsors. And be assured that we’ll make sure that our partners get the most out of their contribution, regardless of how big or small.   MIX11, period.    Silverlight 5 is going to be great. The only thing I’m a bit nervous about is that I still haven’t read anything official on whether C# next version’s async/await will be in it. Leaving that out would be really stupid considering the end-of-2011 release of SL5 (moving the next release way into the future).

  Read the article

• MySql Connector/NET 6.7.4 GA has been released

  - by fernando

  MySQL Connector/Net 6.7.4, a new version of the all-managed .NET driver for MySQL has been released.  This is the GA, is feature complete. It is recommended for production environments.  It is appropriate for use with MySQL server versions 5.0-5.7.  It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.7 version of MySQL Connector/Net brings the following new features: -  WinRT Connector. -  Load Balancing support. -  Entity Framework 5.0 support. -  Memcached support for Innodb Memcached plugin. -  This version also splits the product in two: from now on, starting version 6.7, Connector/NET will include only the former Connector/NET ADO.NET driver, Entity Framework and ASP.NET providers (Core libraries of MySql.Data, MySql.Data.Entity & MySql.Web). While all the former product Visual Studio integration (Design support, Intellisense, Debugger) are available as part of MySql Windows Installer under the name "MySql for Visual Studio".  WinRT Connector  ------------------------------------------- Now you can write MySql data access apps in Windows Runtime (aka Store Apps) using the familiar API of Connector/NET for .NET.  Load Balancing Support  -------------------------------------------  Now you can setup a Replication or Cluster configuration in the backend, and Connector/NET will balance the load of queries among all servers making up the backend topology.  Entity Framework 5.0  -------------------------------------------  Connector/NET is now compatible with EF 5, including special features of EF 5 like spatial types.  Memcached  -------------------------------------------  Just setup Innodb memcached plugin and use Connector/NET new APIs to establish a client to MySql 5.6 server's memcached daemon.  Bug fixes included in this release: - Fix for Entity Framework when inserts data having Identity columns (Oracle bug #16494585). - Fix for Connector/NET cannot read data from a MySql table using UTF-16/UTF-32 (MySql bug #69169, Oracle bug #16776818). - Fix for Malformed query in Entity Framework when eager loading due to multiple projections (MySql bug #67183, Oracle bug #16872852). - Fix for database objects with 'dbo' prefix when using automatic migrations in Entity Framework 5.0 (Oracle bug #16909439). - Fix for bug IIS application pool reset worker process causes website to crash (Oracle bug #16909237, Mysql Bug #67665). - Fix for bug Error in LINQ to Entities query when using Distinct().Count() (MySql Bug #68513, Oracle bug #16950146). - Fix for occasionally return no data when socket connection is slow, interrupted or delayed (MySql bug #69039, Oracle bug #16950212). - Fix for ConstraintException when filling a datatable (MySql bug #65065, Oracle bug #16952323). - Fix for Data Provider is not found after uninstalling Mysql for visual studio (Oracle bug #16973456). - Fix for nested sql generated for LINQ to Entities query with Take and Order by (MySql bug #65723, Oracle bug #16973939). The documentation is available at http://dev.mysql.com/doc/refman/5.7/en/connector-net.html  Enjoy and thanks for the support!  --  Fernando Gonzalez Sanchez | Software Engineer |  Oracle MySQL Windows Experience Team, Connector/NET  Guadalajara | Jalisco | Mexico 

  Read the article

• Dark Sun Dispatch 001

  - by Chris Williams

  If you aren't into tabletop (aka pen & paper) RPGs, you might as well click to the next post now... Still here? Awesome. I've recently started running a new D&D 4.0 Dark Sun campaign. If you don't know anything about Dark Sun, here's a quick intro: The campaign take place on the world of Athas, formerly a lush green world that is now a desert wasteland. Forests are rare in the extreme, as is water and metal. Coins are made of ceramic and weapons are often made of hardened wood, bone or obsidian. The green age of Athas was centuries ago and the current state was brought about through the reckless use of sorcerous magic. (In this world, you can augment spells by drawing on the life force of the world & people around you. This is called defiling. Preserving magic draws upon the casters life force and does not damage the surrounding world, but it isn't as powerful.) Humans are pretty much unchanged, but the traditional fantasy races have changed quite a bit. Elves don't live in the forest, they are shifty and untrustworthy desert traders known for their ability to run long distances through the wastes. Halflings are not short, fat, pleasant little riverside people. Instead they are bloodthirsty feral cannibals that roam the few remaining forests and ride reptilians beasts akin to raptors. Gnomes are extinct, as are orcs. Dwarves are mostly farmers and gladiators, and live out in the sun instead of staying under the mountains. Goliaths are half-giants, not known for their intellect. Muls are a Dwarf & Human crossbreed that displays the best traits of both races (human height and dwarven stoutness.) Thri-Kreen are sentient mantis people that are extremely fast. Most of the same character classes are available, with a few new twists. There are no divine characters (such as Priests, Paladins, etc) because the gods are gone. Nobody alive today can remember a time when they were still around. Instead, some folks worship the elemental forces (although they don't give out spells.) The cities are all ruled by Sorcerer King tyrants (except one city: Tyr) who are hundreds of years old and still practice defiling magic whenever they please. Serving the Sorcerer Kings are the Templars, who are also defilers and psionicists. Crossing them is as bad, in many cases, as crossing the Kings themselves. Between the cities you have small towns and trading outposts, and mostly barren desert with sometimes 4-5 days on foot between towns and the nearest oasis. Being caught out in the desert without adequate supplies and protection from the elements is pretty much a death sentence for even the toughest heroes. When you add in the natural (and unnatural) predators that roam the wastes, often in packs, most people don't last long alone. In this campaign, the adventure begins in the (small) trading fortress of Altaruk, a couple weeks walking distance from the newly freed city of Tyr. A caravan carrying trade goods from Altaruk has not made it to Tyr and the local merchant house has dispatched the heroes to find out what happened and to retrieve the goods (and drivers) if possible. The unlikely heroes consist of a human shaman, a thri-kreen monk, a human wizard, a kenku assassin and a (void aspect) genasi swordmage. Gathering up supplies and a little liquid courage, they set out into the desert and manage to find the northbound tracks of the wagon. Shortly after finding the tracks, they are ambushed by a pack of silt-runners (small lizard people with very large teeth and poisoned pointy spears.) The party makes short work of the creatures, taking a few minor wounds in the process. Proceeding onward without resting, they find the remains of the wagon and manage to sneak up on a pack of Kruthiks picking through the rubble and spilled goods. Unfortunately, they failed to take advantage of the opportunity and had a hard fight ahead of them. The party defeated the kruthiks, but took heavy damage (and almost lost a couple of their own) in the process. Once the kruthiks were dispatched, they followed a set of tracks further north to a ruined tower...

  Read the article

• Replacing ASP.NET Forms Authentication with WIF Session Authentication (for the better)

  - by Your DisplayName here!

  ASP.NET Forms Authentication and WIF Session Authentication (which has *nothing* to do with ASP.NET sessions) are very similar. Both inspect incoming requests for a special cookie that contains identity information, if that cookie is present it gets validated and if that is successful, the identity information is made available to the application via HttpContext.User/Thread.CurrentPrincipal. The main difference between the two is the identity to cookie serialization engine that sits below. Whereas ForsmAuth can only store the name of the user and an additional UserData string. It is limited to a single cookie and hardcoded to protection via the machine key. WIF session authentication in turn has these additional features: Can serialize a complete ClaimsPrincipal (including claims) to the cookie(s). Has a cookie overflow mechanism when data gets too big. In total it can create up to 8 cookies (á 4 KB) per domain (not that I would recommend round tripping that much data). Supports server side caching (which is an extensible mechanism). Has an extensible mechanism for protection (DPAPI by default, RSA as an option for web farms, and machine key based protection is coming in .NET 4.5) So in other words – session authentication is the superior technology, and if done cleverly enough you can replace FormsAuth without any changes to your application code. The only features missing is the redirect mechanism to a login page and an easy to use API to set authentication cookies. But that’s easy to add ;) FormsSessionAuthenticationModule This module is a sub class of the standard WIF session module, adding the following features: Handling EndRequest to do the redirect on 401s to the login page configured for FormsAuth. Reads the FormsAuth cookie name, cookie domain, timeout and require SSL settings to configure the module accordingly. Implements sliding expiration if configured for FormsAuth. It also uses the same algorithm as FormsAuth to calculate when the cookie needs renewal. Implements caching of the principal on the server side (aka session mode) if configured in an AppSetting. Supports claims transformation via a ClaimsAuthenticationManager. As you can see, the whole module is designed to easily replace the FormsAuth mechanism. Simply set the authentication mode to None and register the module. In the spirit of the FormsAuthentication class, there is also now a SessionAuthentication class with the same methods and signatures (e.g. SetAuthCookie and SignOut). The rest of your application code should not be affected. In addition the session module looks for a HttpContext item called “NoRedirect”. If that exists, the redirect to the login page will *not* happen, instead the 401 is passed back to the client. Very useful if you are implementing services or web APIs where you want the actual status code to be preserved. A corresponding UnauthorizedResult is provided that gives you easy access to the context item. The download contains a sample app, the module and an inspector for session cookies and tokens. Let’s hope that in .NET 4.5 such a module comes out of the box. HTH

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Using rel=next and rel=prev with multiple sets of paginated content on the same page

  - by jakejgordon

  We are running into issues with trying to figure out how to implement rel="next" and rel="prev" -- coupled with rel="canonical" -- with multiple sets of paginated content on the same page, with pages in multiple cultures. In other words, how do we implement these when we have a pager for both Product Reviews and Questions and Answers (aka "Q&A") on the same page, with duplicate content across culture-specific URLs (e.g. /us/en/my-product vs. /ca/en/my-product)? Our current implementation will actually do a full postback when you click Page 2, and will add something to the query string (e.g. website.com/ca/en/my-product?previewpage=2 or website.com/ca/en/my-product?questionpage=2). If we only had one set of paginated content then the implementation would certainly be more straightforward. Adding a second set of paginated content (i.e. Q&A) complicates things. Let's assume that we want the United States English page to be the canonical target (i.e. /us/en/my-product) based on culture. If you go to the /ca/en/my-product page you'll have a rel="canonical" href="/us/en/my-product". So far so good. Let's also assume that we are not implementing a page that lists ALL Product Reviews and Q&A. This would likely solve a number of our problems by using rel="canonical" to this page, but is not an option for reasons that are out of scope for this discussion. Now if you click on page 2 of Product Reviews, it will reload the page with /ca/en/my-product?reviewpage=2 as the URL. Given this scenario, here are my questions: On page 2 of the my-product page on the Canadian site, should there be a rel="canonical" to /us/en/my-product?reviewpage=2 (assuming the content is identical in the United States and Canada)? Should the rel="prev" go to /ca/en/my-product?reviewpage=1 or should it go to /ca/en/my-product ? The query-string version would really only be accessible if using the pager and shows the exact same content as the base page. The following two questions are closely related to this one. Should the /ca/en/my-product?reviewpage=1 have a rel canonical directly to /us/en/my-product (United States page with nothing in query string) since the content is identical)? Given that Q&A content is also paginated, should there be a rel="next" on the base page without query string? In other words, should the /ca/en/my-product page have a rel="next" to /ca/en/my-product?reviewpage=2 AND rel="next" to /ca/en/my-product?questionpage=2 . So far as I can tell it doesn't make sense to have multiple rel="next" implementations on the same page. I suspect that the pages with query string values should have rel="next" and rel="prev" that only point to other pages with query strings and not to the base page. The ?reviewpage=1 and ?questionpage=1 pages would then just have a rel="canonical" to /us/en/my-product . Thoughts? I know this is a tough one -- that's why I brought it to this community. Thanks so much for your help in advance!

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• October in Review

  - by Richard Bingham

  With OpenWorld over October was time to get back to serious work for everyone, including the Fusion Applications Developer Relations team. Don't forget the OpenWorld content is still available, including presentation downloads, for a limited period of time so be sure to grab anything you found useful or take another scan for anything you might have missed. Of all the announcements, the continued evolution of the Oracle Cloud services for extending and integrating with Fusion Applications is increasing in popularity, and certainly the Cloud Marketplace is something we're becoming involved in. More details to follow. Fusion Concepts Last week Vik from our team started the new "Fusion Concepts" series of articles, providing those new to Fusion Applications an explanation of the architectural basics, with the aim to reduce the learning curve and lay the platform for more efficient and effective development. The series begun with an insightful first post on the different schemas that exist in the Fusion Applications database. Look out for upcoming posts on multi-lingual entities, profile options, look-ups and more. New Learning Resources Our YouTube channel continued to expand with more 'how to' videos on using page composer, extending the Simplified UI (aka FUSE), and integrating BI reports and analytics. Also the Oracle Learning Library is now well established as a central resource for knowledge, now with thousands of tutorials, videos, and documents. Of particular note are the great new extensibility-related videos added by the CRM Product Management team, including more on the ever-expanding capabilities of Application Composer. To see some examples of these search using keyword 'customization' or the product 'Sales Cloud'. Finally on learning resources, as Oliver mentioned the Oracle Press book on Fusion Application Customization and Extensibility is now available for pre-order on Amazon (due out 1st Jan). Out And About October also saw us attend the annual Apps Conference held by the UK Oracle User Group in London. Interestingly there was an Applications Transformation stream of sessions and content that included Fusion Applications with all the latest in the Oracle Applications evolution, as always focused around the three tenets of social, mobile, and cloud. Read more in Richard's post-event write up. Other teams around Oracle have also been busy. Angelo from the Platform Technical Services group has done quite a bit of work using web services with Fusion SaaS and has published many interesting findings on his blog. It's definitely recommended reading if you are working on any related integration projects. The middleware-for-applications group has built a new tool called "AppAdvantage" offering an online assessment of your use of Fusion Middleware technologies with Oracle Applications. As the popularity of integrating cloud applications with on-premises systems continued to grow, leveraging existing middleware technologies (and licenses) to support the integration solution is likely to be of paramount importance. Similarly the "Build Enterprise Application Extensions with Ease" section of the related webpage has AppsUX director Killan Evers speaking about customization using the composer tools. Both are useful resources for those just getting started with a move to Fusion Applications. The Oracle A-Team, specialists in middleware technical architecture, always publish superb content via their 'chronicles' site, now with a substantial amount specifically related to Fusion Applications. Click on the Fusion Applications menu on the top right of their homepage to see more. Last month of particular note was an article on customizing the timeout pop-up message that shows to inactive users, providing design-time insight and easy-to-follow steps. Finally if you're looking at using Oracle Middleware and Cloud to tailor and extend your applications then you may also be interested in this new blog post on the roadmap for Oracle SOA and the latest on-demand Cloud Development webcast.

  Read the article

• Why is there no service-oriented language?

  - by Wolfgang

  Edit: To avoid further confusion: I am not talking about web services and such. I am talking about structuring applications internally, it's not about how computers communicate. It's about programming languages, compilers and how the imperative programming paradigm is extended. Original: In the imperative programming field, we saw two paradigms in the past 20 years (or more): object-oriented (OO), and service-oriented (SO) aka. component-based (CB). Both paradigms extend the imperative programming paradigm by introducing their own notion of modules. OO calls them objects (and classes) and lets them encapsulates both data (fields) and procedures (methods) together. SO, in contrast, separates data (records, beans, ...) from code (components, services). However, only OO has programming languages which natively support its paradigm: Smalltalk, C++, Java and all other JVM-compatibles, C# and all other .NET-compatibles, Python etc. SO has no such native language. It only comes into existence on top of procedural languages or OO languages: COM/DCOM (binary, C, C++), CORBA, EJB, Spring, Guice (all Java), ... These SO frameworks clearly suffer from the missing native language support of their concepts. They start using OO classes to represent services and records. This leads to designs where there is a clear distinction between classes that have methods only (services) and those that have fields only (records). Inheritance between services or records is then simulated by inheritance of classes. Technically, its not kept so strictly but in general programmers are adviced to make classes to play only one of the two roles. They use additional, external languages to represent the missing parts: IDL's, XML configurations, Annotations in Java code, or even embedded DSL like in Guice. This is especially needed, but not limited to, since the composition of services is not part of the service code itself. In OO, objects create other objects so there is no need for such facilities but for SO there is because services don't instantiate or configure other services. They establish an inner-platform effect on top of OO (early EJB, CORBA) where the programmer has to write all the code that is needed to "drive" SO. Classes represent only a part of the nature of a service and lots of classes have to be written to form a service together. All that boiler plate is necessary because there is no SO compiler which would do it for the programmer. This is just like some people did it in C for OO when there was no C++. You just pass the record which holds the data of the object as a first parameter to the procedure which is the method. In a OO language this parameter is implicit and the compiler produces all the code that we need for virtual functions etc. For SO, this is clearly missing. Especially the newer frameworks extensively use AOP or introspection to add the missing parts to a OO language. This doesn't bring the necessary language expressiveness but avoids the boiler platform code described in the previous point. Some frameworks use code generation to produce the boiler plate code. Configuration files in XML or annotations in OO code is the source of information for this. Not all of the phenomena that I mentioned above can be attributed to SO but I hope it clearly shows that there is a need for a SO language. Since this paradigm is so popular: why isn't there one? Or maybe there are some academic ones but at least the industry doesn't use one.

  Read the article

• JavaOne User Group Sunday

  - by Tori Wieldt

  Before any "official" sessions of JavaOne 2012, the Java community was already sizzling. User Group Sunday was a great success, with several sessions offered by Java community members for anyone wanting to attend. Sessions were both about Java and best practices for running a JUG. Technical sessions included "Autoscaling Web Java Applications: Handle Peak Traffic with Zero Downtime and Minimized Cost,"  "Using Java with HTML5 and CSS3," and "Gooey and Sticky Bits: Everything You Ever Wanted to Know About Java." Several sessions were about how to start and run a JUG, like "Getting Speakers, Finding Sponsors, Planning Events: A Day in the Life of a JUG" and "JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group." Badr ElHouari and Faiçal Boutaounte presented the session "Why Communities Are Important and How to Start One." They used the example of the Morocco JUG, which they started. Before the JUG, there was no "Java community," they explained. They shared their best practices, including: have fun, enjoy what you are doing get a free venue to have regular meetings, a University is a good choice run a conference, it gives you visibility and brings in new members students are a great way to grow a JUG Badr was proud to mention JMaghreb, a first-time conference that the Morocco JUG is hosting in November. They have secured sponsors and international speakers, and are able to offer a free conference for Java developers in North Africa. The session also included a free-flowing discussion about recruiters (OK to come to meetings, but not to dominate them), giving out email addresses (NEVER do without permission), no-show rates (50% for free events) and the importance of good content (good speakers really help!). Trisha Gee, member of the London Java Community (LJC) was one of the presenters for the session "Benefits of Open Source." She explained how open sourcing the LMAX Disruptor (a high performance inter-thread messaging library) gave her company LMAX several benefits, including more users, more really good quality new hires, and more access to 3rd party companies. Being open source raised the visibility of the company and the product, which was good in many ways. "We hired six really good coders in three months," Gee said. They also got community contributors for their code and more cred with technologists. "We had been unsuccessful at getting access to executives from other companies in the high-performance space. But once we were open source, the techies at the company had heard of us, knew our code was good, and that opened lots of doors for us." So, instead of "giving away the secret sauce," by going open source, LMAX gained many benefits. "It was a great day," said Bruno Souza, AKA The Brazilian Java Man, "the sessions were well attended and there was lots of good interaction." Sizzle and steak!

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >