Search Results

Search found 1868 results on 75 pages for 'board'.

Page 25/75 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • Video: A Peek Inside the HTC Incredible Phone

    <b>Wired: </b>"TechRestore, an electronics repair shop, has taken apart the Incredible and then it put all back together. What's fascinating to watch in the video is how small and compact the components are and how well they pack into the circuit board."

    Read the article

  • The EU Commission's Digital Agenda Plan

    <b>Groklaw:</b> "I can't help but think of Microsoft's recent bragging about not being fully interoperable with Google Docs. I think they're not yet on the interoperability train that is already leaving the station, and I hope they hop on board before it's too late."

    Read the article

  • Why do programs take more than 2 seconds to load on my Ubuntu 12.04?

    - by Gaige
    Here's a description of my build (simple) Processor: AMD Phenom II x6 1090t Ram: 16gb 1333 mhz Board: TA990FXE Video Card : HD 6870 HDD Ubuntu is installed on: 320gb caviar blue 7200rpm That should be sufficient enough to diagnose this. Yes I did install the AMD video drivers recommended by Ubuntu. Programs take 2+ seconds to load, and I really don't tolerate that...Windows 7 loads programs as fast as my hdd allows Unless this is how Ubuntu is meant to work...then I'll just go back to Debian command-line.

    Read the article

  • 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

    - by T.J. Crowder
    (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

    Read the article

  • Can I have a single solid state drive and a RAID array on the same machine?

    - by jaminto
    Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

    Read the article

  • How to plug power/reset buttons from case to motherboard leads?

    - by MaxMackie
    I have a motherboard I salvaged from a pre-assembled computer. Except now I'm trying to use it in my own custom build. The problem is, this motherboard doesn't have any documentation because it was never meant to be used by consumers (as far as I know). I need to plug in my case's power/reset/hdd-light plugs into the motherboard. I usually check the documentation of the board to see which leads go to what connector, but I have no documentation for the board. So, as I see it, I have two options: I find the documentation (I've emailed gateway customer service, but I'm unsure of how successful I'll be with that). I simply test the leads one after the other (can this cause damage if plugged into the wrong leads?) However, there might even be a standard for which leads do what action (I'm not sure about this). For reference, my motherboard's SN/MD (?) is: H57M01G1-1.1-8EKS3H Does anyone have any idea if I can find documentation or find another way to be sure if my connections are correct?

    Read the article

  • On Windows XP, Start > Run "My Documents" sometimes doesn't work

    - by Clayton Hughes
    On all of my home computers, I can enter "my documents" into the Start Run prompt and the My Documents folder of the current profile will open up. What's more, I can continue typing subfolders, files, etc. and auto-complete works and it's smart and enjoyable. I can't check at the moment, but I'm almost positive entries like "My Pictures" and "My Music" also go to their correct folders. On my work computers, if I enter "my documents" into the Start Run prompt, I get the following error: "Windows cannot find 'my'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start Button, and then click Search." I can sort of circumvent this by creating a shortcut in my PATH named 'my' that points to My Documents folder, but this doesn't solve the auto-complete option (and it's otherwise imperfect, of course, because "my pictures" or "my music" all direct to the same place. A google search doesn't provide much help on this, although it does identify a poster in 2007 with this same question at another board: http://www.msfn.org/board/lofiversion/index.php/t124813.html (Login required, but Google cache available here: http://preview.tinyurl.com/ygxhwwl) Is this just a limitation of the networks belonging to a domain, or is there some way I can get this functionality back? My documents folder does live in the standard place (C:\Documents and Settings{username}\My Documents), and not on a network drive or anything. It's probably worth adding that the computers are part of some freakish Novell domain thing, too. I'm not in IT here so I'm not too up on the details. Thanks for any help/suggestions!

    Read the article

  • Officially announced RAM support size doesn't apply to one of twin rigs with just one difference

    - by Deniz
    It'll take a little long to describe my situation but here goes the story : In January 2009 we bought (the OEM parts) two similar systems with just one difference. One of them had a Phenom X4 cpu and the other one (mine) a Phenom X3 cpu. At the beginning we had problems with both systems to power them on whilst having all of their ram slots being full. We decided to install the systems with just 2 slots populated and later try to install the rest of ram sticks. Both systems did succeed to support 3 sticks. We tried many different procedures to make the systems work with their fourth ram slots being populated. We waited for new bios updates and flashed the boards when they were available, we tried different ram sticks with different frequencies etc. One day while we were trying to install the fourth stick, the X4 machine did accept it. The other one did not. The most mind boggling thing was that after one of my trials the X3 system begun to not operate with the third slot populated. Our boards did have AMD 770 chipsets and we even tried to change the board of the X3 machine with another 770 chipset board. Now my questions are : Should we change the cpu ? What is causing the X3 system to not accept the fourth (or now the third) ram stick ? The manufacturers sites do claim that this boards do accept 4 ram sticks (but they only tested them with certain ram brands and models). What are the limitations for maximum ram configurations on motherboards ? Are there some "rules of thumb" except frequency, voltage, chip type considerations for which we did check our parts ? Our boards are : Gigabyte GA-MA770-DS3 Sapphire PC-AM2RX780 - PURE CrossFireX 770

    Read the article

  • Enabling AHCI in BIOS for SSD

    - by Robert
    I am trying to help a friend with a desktop upgrade. It is an old machine with an Intel DG31 main board. The board has 1 IDE port to which a DVD-ROM drive is connected, and 2 SATA ports. 1 SATA port had a hard drive with XP on it. I have made that the secondary drive now and wiped the OS as requested, so it is just for data. The new SSD has been installed but I read that for best results one must enable AHCI in the BIOS? So I checked and in the BIOS there is a SATA Mode setting with 2 options - Native and Legacy. I think Native means AHCI? After setting to Native, I installed Windows 7 Home Premium and all the latest drivers from Intel's website and all Windows Updates. Now when I check Device Manager I see this: Also Microsoft says HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV\Start should have value 0 for AHCI but I see that the value is 3 for both. So does this mean that Native mode is not AHCI? Or Windows 7 ignored BIOS setting and installed in IDE mode, maybe because both cables are present? Please help me enable AHCI on this system. Thanks!

    Read the article

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

  • Disaster After Removing Two HDD From LaCie RAID 0 Case

    - by John
    This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be written, and to remove the data ASAP. I did that and erased and reinitialized the RAID. System reported it was fine, no issues. I wrote to the RAID again and the system reported the same issue. So, I removed the drives and tested them individually thinking one must have gone bad. Sure enough, one HDD reported all bad blocks, every single one after the Master Boot Record. I didn't think much about it because of the age of the drives, 5 years old. So, I bought two new drives plugged them in and started up the RAID again. Exactly the same thing happened. All was fine after initializing the RAID and then the next day after powering on the RAID the exact same issue. The HDD sitting in the same position as the first "bad" HDD reported all bad blocks. Obviously, this is an issue with LaCie's bridge board not with the drives. No utility I have used has been able to bring this HDD back to life. I thought I would just copy the MBR from the good drive to the new one using a sector editor but am hesitant. Is it possible the firmware on the HDD has been corrupted by the LaCie bridge board?? What else could be the cause of such an issue? How can I fix this drive?

    Read the article

  • USB Mouse and Keyboard not working in Linux 4 Tegra

    - by Sijo
    I am a new person in Tegra Linux development. I have Tamontem NG Evaluation board with Tegra 3 Chip. I installed L4T sample file system from NVIDIA tegra Resources (https://developer.nvidia.com/linux-tegra) and installed the file system as described in the documentation provided in NVIDIA site. Already these was an SD card with L4T running. i dont want to change the boot loader. So I copied the boot.scr.uimg to root (/) folder and uImage to boot(/boot/) and it starts booting from the existing SD card. After that while booting, some errors occurred in some Bluetooth devices (there is no bluetooth device in the board). So I disabled Bluetooth by giving the following command sudo mv /etc/init/bluetooth.conf /etc/init/bluetooth.conf.noexec Now the problem is that mouse and keyboard are not working. So i cannot login. Even though i installed desktop, the mouse and keyboard are not working. But mouse and keyboard are enumerating. lsusb command is showing the USB mouse and keyboard. The installed file system is Ubuntu 13.04. Linux Kernel version is 3.1 What to do. Please help.Thanks in Advance.

    Read the article

  • How to get an ARM CPU clock speed in Linux?

    - by MiKy
    I have an ARM-based embedded machine based on S3C2416 board. According to the specifications I have available there should be a 533 MHz ARM9 (ARM926EJ-S according to /proc/cpuinfo), however the software running on it "feels" slow, compared to the same software on my Android phone with a 528MHz ARM CPU. /proc/cpuinfo tells me that BogoMIPS is 266.24. I know that I should not trust BogoMIPS regarding performance ("Bogo" = bogus), however I would like to get a measurement on the actual CPU speed. On x86, I could use the rdtsc instruction to get the time stamp counter, wait a second (sleep(1)), read the counter again to get an approximation on the CPU speed, and according to my experience, this value was close enough to the real CPU speed. How can I find the actual CPU speed of given ARM processor? Update I found this simple Pi calculator, which I compiled both for my Android phone and the ARM board. The results are as follows: S3C2416 # cat /proc/cpuinfo Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 266.24 Features : swp half fastmult edsp java ... #./pi_arm 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 8.50 sec. (real time) Android # cat /proc/cpuinfo Processor : ARMv6-compatible processor rev 2 (v6l) BogoMIPS : 527.56 Features : swp half thumb fastmult edsp java # ./pi_android 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 5.95 sec. (real time) So it seems that the ARM926EJ-S is slower than my Android phone, but not twice slower as I would expect by the BogoMIPS figures. I am still unsure about the clock speed of the ARM9 CPU.

    Read the article

  • Static noise in headphones

    - by John Murdoch
    I have a Asus P6T based system. I was using the on-board sound (plugging in Logitech X-230 2.1 analog speakers in the green "front speakers" 3.5mm analog output, then plugging in my headphones in that). I was quite happy with the sound quality (didn't hear any static noise if volume was turned down to my normal listening level). Then about a week ago I started having terrible static noise from the left channel, and no normal audio on that left channel. Right channel had more static noise than usual but did have a bit of sound. I tried using the AC'97 in front of my case but that seemed to have no signal. I decided my on-board sound card has gone bad and bought an internal sound card to replace it (Startech 7.1Ch PCI). This fixed the "no sound from left channel problem", but I had much more audible static noise. I decided the card was low quality and/or it had interference from all the other things happening inside the computer case, and bought a Sweex SC016 external USB sound card. But even with that I have static noise in headphones. Positioning the USB sound card differently doesn't seem to help. Trying the other analog outputs (e.g., surround) doesn't help. The static noise in all cases is proportional to the volume. I have tried different headphones, but the situation is situation though perhaps the flavour of the static noise changes slightly. So what are my options? a) Get another, more expensive, external USB sound card hoping the quality will improve? b) Get another, more expensive, internal sound card (PCIe 1x perhaps) hoping the quality will improve? c) Get a dedicated DAC box? d) Get some Hi-Fi earphones? Suggestions? tl;dr - Two different sound cards both still have static noise in headphones.

    Read the article

  • How do I boot [embedded] linux from sd card?

    - by Brandon Yates
    I am hacking together a quick embedded linux system on a DM816x evm board. Previously I have been using TFTP and NFS to load my kernel and root filesystem to the board. I am now trying to switch over to loading everything from an SD card. I have my card partitioned such that uBoot and my kernel image are in one partition, and my rootFS in another partition. At power-on, Uboot starts correctly and successfully launches the kernel. However, the kernel is unable to mount the root file system. It appears that it doesn't recognize any SD (mmc) cards. It gives this error message. VFS: Cannot open root device "mmcblk0p2" or unknown-block(2,0) Please append a correct "root=" boot option; here are the available partitions: 1f00 256 mtdblock0 (driver?) 1f01 8 mtdblock1 (driver?) 1f02 2560 mtdblock2 (driver?) 1f03 1272 mtdblock3 (driver?) 1f04 2432 mtdblock4 (driver?) 1f05 128 mtdblock5 (driver?) 1f06 4352 mtdblock6 (driver?) 1f07 204928 mtdblock7 (driver?) 1f08 50304 mtdblock8 (driver?) Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) I feel like I'm missing something fundamental here. Why does it not recognize the root device I am trying to load from? Here is my uBoot boot script that is running: setenv bootargs console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw mem=124M earlyprink vram=50M ti816xfb.vram=0:16M,1:16M,2:6M ip=off noinitrd;mmc init;fatload mmc 1 0x80009000 uImage;bootm 0x80009000

    Read the article

  • Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

    - by Emerson
    I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

    Read the article

  • Are flash drives and hard drives thought of as "an ocean of bytes"?

    - by Jian Lin
    Why can a USB Flash drive be formatted as NTFS or FAT32? Is the USB Flash Drive and Hard Drive just to be thought of as "an ocean of bytes"? I get very used to hearing formatting a hard drive as FAT32 or NTFS, but we can also format a USB Flash drive as NTFS or FAT32? Is it because a hard drive or Flash drive both can be thought of as "an ocean of bits" or "an ocean of bytes"? I remember RAM as: it takes 16 bit or 32 bit as an address signal (the 16 or 32 copper footing on the circuit board), and give out 8 bit of data (the other 8 copper footing on the circuit board). So can a hard drive be thought of as working that way too? So that's why a Flash drive can be the same too? Just an "ocean of bytes". But is it true that hard drive's hardware make it an ocean of sector or something else, that is, the smaller unit of read / write is not byte but something else? So with this "ocean of bytes", NTFS has the format that says, "if the first byte is __, then it means __ (it is a file or folder, and link to which sector, indicated by byte 2 and 3, etc, etc)"

    Read the article

  • How important is dual-gigabit lan for a super user's home NAS?

    - by Andrew
    Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

    Read the article

  • How to determine the root cause of a system lockup on Ubuntu 8.04 LTS?

    - by jdt141
    I'm currently working a project that involves setting up a PC/104 stack and running Ubuntu 8.04 LTS. We need to use the PC/104 stack because its an embedded application - and we're required to use a DeviceNet peripheral card to communicate to other devices. (DeviceNet is just a protocol on top of CAN.) Anyway, the following hardware is on the stack: Kontron MOPSPM104 with a 1GHz Intel Celeron processor ConnectTech FlashDrive/104 4GB Industrial Temp (-40 to +85 C) Woodhead (Molex) PC104DVNIO DeviceNet card A run of the mill 104 power supply The Kontron Board offers two serial ports, one VGA out, and two USB ports. The DeviceNet card is an ISA card. Because of this (per the User's Guide for the Kontron Board), I have manually set the IRQs in the BIOS to be appropriately configured, and turned off ACPI in both the BIOS and passed the appropriate flag in GRUB. I've installed Ubuntu 8.04 desktop, 32 bit. The problem that I'm having is that, from time to time, the entire 104 stack locks up. This only seems to happen in two cases, both of which we're running GNOME. We have a custom application that uses the DeviceNet card, and the system will lock up, or (more frequently) when we're running Firefox and either surfing for some information or trying to test it - typically by streaming video from a IP-camera. The reason I ask this questions is I cannot determine the root cause of this lockup. The IRQs appear to correctly configured in the BIOS and as the Kernel sees them, and nothing is logged to dmesg. If you all could help me determine the root cause of this lockup, I would greatly appreciate it. Thanks.

    Read the article

  • Expresscard Not Detected in PCI-E Adapter

    - by maxpower47
    I'm trying to put an expresscard TV tuner (Avermedia HC82) into my HTPC using this expresscard to PCI-E adapter. I've verified that the tuner works fine in my laptop. The motherboard is a Biostar TF7050-M2. When I install it and turn it on, the light on the back of the adapter comes on fine (there are two indicator lights on the back to show if it is using PCI-E or USB communication, USB communication goes through a USB cable connected between the card and a header on the motherboard) showing that it is working in PCI-E mode. However, the device is never detected in Windows 7 Professional x64. The auto detect never happens, it doesn't show up in the device manager, and I can have it rescan for new hardware and nothing is found. I tested the whole setup (tuner + adapter) in another PC (also using Win 7 Pro x64) and it worked fine. I also tried: Plugging the adapter in to the PCI-E x16 slot on the motherboard (I verified first that the x16 slot worked by installing a video card in it) Booting into safe mode and rescanning Updating the chipset drivers Installing the tuner drivers first Using a different USB cable, plugged in to one of the known good ports on the back of the board Trying it without the USB cable plugged in Removing the other PCI cards that were installed on the board Looking through the BIOS for any setting that might be disabling it somehow to no avail. I'm at a loss for what else to try. I really don't want to RMA it (the shipping back to newegg will be almost as much as it cost to buy in the first place. Any ideas?

    Read the article

  • Compaq Motherboard gives "CPU Fan Error"

    - by John
    I have a motherboard for a HP business desktop dx5150 PC. The model written on the board is "MS-7050" and it is for an AMD socket 939 processor. I got everything installed in it, and when I turned it on, it showed a message stating that there was a "CPU Fan Error" (or some similar language) and then turned off. It never stays on for more than about 30 seconds, probably less. The fan had previously been working great, but I replaced it anyway with a brand new Cooler Master fan. This did not work. I then reset the BIOS with the jumpers on the board, no dice. I replaced the CMOS battery. Same error. I then replaced the entire computer power supply with a brand new Antec, same error. The fan header is keyed, and has room for 3 pins. The CPU fan is designed the same way, so its not that I'm missing a temperature sensor or anything. Can anyone give some suggestions? Especially maybe some secret keystrokes to bypass this error?

    Read the article

  • AHCI, Windows 7 and can only boot with Windows DVD present

    - by Rob Pridham
    Foolishly, I installed Windows 7 with my new SSD set to IDE. I would like to change it to AHCI. I have done this before, with a different motherboard. What happens: I set the controller to AHCI in the BIOS; I also check correct boot order On boot, I get the 'BOOTMGR not found' error I use the Windows Recovery Console on the DVD Diskpart etc can see the disks, and bootrec claims to have rewritten the MBR/bootloader I reboot, same problem Recovery Console again and it detects a problem, fixes, reboots Recovery Console again and it detects the OS, and a problem - fixes, reboots I ignore the 'press any key to boot from DVD' prompt Windows boots fine I restart without the DVD and I'm back to square one That optional 'press a key to boot from DVD' stage is something that the recovery process introduces - normally you have to choose to boot to the DVD at the BIOS stage. You also see this when installing Windows. I suspect that whatever temporary state that is is compatible with AHCI - but not the standard it returns to. I have done the msahci/iaStorV registry hacks to no avail (this worked with the previous board). I can put it back to IDE where normal service is resumed. The board is an Asus M5A99X, the southbridge is AMD SB950, and this is Windows 7 x64. I would quite like not to have to reinstall it again. Any ideas as to what I can do as a permanent fix?

    Read the article

  • Short, intermittent USB port timeouts

    - by jacobsee
    I have a data acquisition application controlled by a Windows PC. I am using an Intel Desktop Board DH67CL motherboard. This has 6 USB2 ports along with 2 of the new blue USB3 ports. The DAQ instrument connects via USB to the computer. Roughly once every day or two there is a short communication glitch with the USB that causes the instrument to disconnect briefly and then reconnect. This is logged so I know whenever it happens. Occasionally it will cause the data acquisition to stop. I've verified that the glitches will go away if I use the USB3 ports, or if I use a PCI add-on card with USB ports. So it seems that there is something going on with these built-in USB2 ports on this motherboard. I haven't yet had a chance to test with other motherboards. My question: what could be causing these glitches and how to get rid of them for this board, or is there a better motherboard to use? We have standardized on the DH67CL because it's inexpensive, has 3 PCI slots that we need, and is readily available. We don't need the power of higher-end server boards but reliability is important. Thanks. Update: This problem has been reproduced many times on different hardware, though we always use the same model of motherboard (DH67CL) and power supply (Antec EA-430D). I don't think the power requirements are very high but will check on that.

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >