Search Results

Search found 639 results on 26 pages for 'brain pusher'.

Page 25/26 | < Previous Page | 21 22 23 24 25 26  | Next Page >

• Bug Triage

  In this blog post brain dump, I'll attempt to describe the process my team tries to follow when dealing with new bug reports (specifically, code defect reports). This is not official Microsoft policy, just the way we do things… if you do things differently and want to share, you can do so at the bottom in the comments (or on your blog).Feature Triage TeamA subset of the feature crew, the triage team (which has representations from the PM, Dev and QA disciplines), looks at all unassigned bugs at regular intervals. This can be weekly or daily (or other frequency) dependent on which part of the product cycle we are in and what the untriaged bug load looks like. They discuss each bug considering the evidence and make a decision of whether the bug goes from Not Yet Assigned to Assigned (plus the name of the DEV to fix this) or whether it goes from Active to Resolved (which means it gets assigned back to the requestor for closure or further debate if they were not present at the triage meeting). Close to critical milestones, the feature triage team needs to further justify bugs they take to additional higher-level triage teams.Bug Opened = Not Yet AssignedSomeone (typically an SDET from the QA team) creates the bug item (e.g. in TFS), ensuring they populate all the relevant fields including: Title, Description, Repro Steps (including the Actual Result at the end of the steps), attachments of code and/or screenshots, Build number that they observed the issue in, regression details if applicable, how it was found, if a test case exists or needs to be created etc. They also indicate their opinion on the Priority and Severity. The bug status is left as Not Yet Assigned."Issue" versus "Fix for issue"The solution to some bugs is easy to determine, e.g. "bug: the column name is misspelled". Obviously the fix is to correct the spelling – still, the triage team should be explicit and enter the correct spelling in the bug's Description. Note that a bad bug name here would be "bug: fix the spelling of the column" (it describes the solution, rather than the problem).Other solutions are trickier to establish, e.g. "bug: the column header is not accessible (can only be clicked on with the mouse, not reached via keyboard)". What is the correct solution here? The last thing to do is leave this undetermined and just assign it to a developer. The solution has to be entered in the description. Behind this type of a bug usually hides a spec defect or a new feature request.The person opening the bug should focus on describing the issue, rather than the solution. The person indicates what the fix is in their opinion by stating the Expected Result (immediately after stating the Actual Result). If they have a complex suggested solution, that should be split out in a separate part, but the triage team has the final say before assigning it. If the solution is lengthy/complicated to describe, the bug can be assigned to the PM. Note: the strict interpretation suggests that any bug with no clear, obvious solution is always a hole in the spec and should always go to the PM. This also ensures the spec gets updated.Not Yet Assigned - Not Yet Assigned (on someone else's plate)If the bug is observed in our feature, but the cause is actually another team, we change the Area Path (which is the way we identify teams in TFS) and leave it as Not Yet Assigned. The triage team may add more comments as appropriate including potentially changing the repro steps. In some cases, we may even resolve the bug in our area path and open a new bug in the area path of the other team.Even though there is no action on a dev on the team, the bug still needs to be tracked. One way of doing this is to implement some notification system that informs the team when the tracked bug changed status; another way is to occasionally run a global query (against all area paths) for bugs that have been opened by a member of the team and follow up with the current owners for stale bugs.Not Yet Assigned - ResolvedThis state transition can only be made by the Feature Triage Team.0. Sometimes the bug description is not clear and in that case it gets Resolved as More Information Needed, so the original requestor can provide it.After understanding what the bug item is about, the first decision is to determine whether it needs to go to a dev.1. If it is a known bug, it gets resolved as "Duplicate" and linked to the existing bug.2. If it is "By Design" it gets resolved as such, indicating that the triage team does not think this is a bug.3. If the bug does not repro on latest bits, it is resolved as "No Repro"4. The most painful: If it is decided that we cannot fix it for this release it gets resolved as "Postponed" or "Won't Fix". The former is typically due to resources and time constraints, while the latter is due to deciding that it is not important enough to consume our resources in any release (yes, not all bugs must be fixed!). For both cases, there are other factors that contribute to the decision such as: existence of a reasonable workaround, frequency we expect users to encounter the issue, dependencies on other team to offer a solution, whether it breaks a core scenario, whether it prohibits customer feedback on a major feature, is it a regression from a previous release, impact of the fix on other partner teams (e.g. User Education, User Experience, Localization/Globalization), whether this is the right fix, does the fix impact performance goals, and last but not least, severity of bug (e.g. loss of customer data, security threat, crash, hang). The bar for fixing a bug goes up as the release date approaches. The triage team becomes hardnosed about which bugs to take, while the developers are busy resolving assigned bugs thus everyone drives for Zero Bug Bounce (ZBB). ZBB is when you have 0 active bugs older than 48 hours.Not Yet Assigned - AssignedIf the bug is something we decide to fix in this release and the solution is known, then it is assigned to a DEV. This is either the developer that will do the work, or a Lead that can further assign it to one of his developer team based on a load balancing algorithm of their choosing.Sometimes, the triage team needs the dev to do some investigation work before deciding whether to take the fix; similarly, the checkin for the fix may be gated on code review by the triage team. In these cases, these instructions are provided in the comments section of the bug and when the developer is done they notify the triage team for final decision.Additionally, a Priority and Severity (from 0 to 4) has to be entered, e.g. a P0 means "drop anything you are doing and fix this now" whereas a P4 is something you get to after all P0,1,2,3 bugs are fixed.From a testing perspective, if the bug was found through ad-hoc testing or an external team, the decision is made whether test cases should be added to avoid future regressions. This is communicated to the QA team.Assigned - ResolvedWhen the developer receives the bug (they should be checking daily for new bugs on their plate looking at bugs in order of priority and from older to newer) they can send it back to triage if the information is not clear. Otherwise, they investigate the bug, setting the Sub Status to "Investigating"; if they cannot make progress, they set the Sub Status to "Blocked" and discuss this with triage or whoever else can help them get unblocked. Once they are unblocked, they set the Sub Status to "Working on Solution"; once they are code complete they send a code review request, setting the Sub Status to "Fix Available". After the iterative code review process is over and everyone is happy with the fix, the developer checks it in and changes the state of the bug from Active (and Assigned to them) to Resolved (and Assigned to someone else).The developer needs to ensure that when the status is changed to Resolved that it is assigned to a QA person. For example, maybe the PM opened the bug, but it should be a QA person that will verify the fix - the developer needs to manually change the assignee in that case. Typically the QA person will send an email to the original requestor notifying them that the fix is verified.Resolved - ??In all cases above, note that the final state was Resolved. What happens after that? The final step should be Closed. The bug is closed once the QA person verifying the fix is happy with it. If the person is not happy, then they change the state from Resolved to Active, thus sending it back to the developer. If the developer and QA person cannot reach agreement, then triage can be brought into it. An easy way to do that is change the status back to Not Yet Assigned with appropriate comments so the triage team can re-review.It is important to note that only QA can close a bug. That means that if the opener of the bug was a PM, when the bug gets resolved by the dev it may land on the PM's plate and after a quick review, the PM would re-assign to an SDET, which is the only role that can close bugs. One exception to this is if the person that filed the bug is external: in that case, we leave it Resolved and assigned to them and also send them a notification that they need to verify the fix. Another exception is if specialized developer knowledge is needed for verifying the bug fix (e.g. it was a refactoring suggestion bug typically not observable by the user) in which case it is fine to have a developer verify the fix, and ideally a different developer to the one that opened the bug.Other links on bug triageA quick search reveals that others have talked about this subject, e.g. here, here, here, here and here.Your take?If you have other best practices your team uses to deal with incoming bug reports, feel free to share in the comments below or on your blog. Comments about this post welcome at the original blog.

  Read the article

• Productivity Tips

  - by Brian T. Jackett

  A few months ago during my first end of year review at Microsoft I was doing an assessment of my year.  One of my personal goals to come out of this reflection was to improve my personal productivity.  While I hear many people say “I wish I had more hours in the day so that I could get more done” I feel like that is the wrong approach.  There is an inherent assumption that you are being productive with your time that you already have and thus more time would allow you to be as productive given more time.    Instead of wishing I could add more hours to the day I’ve begun adopting a number of processes or behavior changes in my personal life to make better use of my time with the goal of improving productivity.  The areas of focus are as follows: Focus Processes Tools Personal health Email Note: A number of these topics have spawned from reading Scott Hanselman’s blog posts on productivity, reading of David Allen’s book Getting Things Done, and discussions with friends and coworkers who had great insights into this topic.   Focus Pre-reading / viewing: Overcome your work addiction Millennials paralyzed by choice Its Not What You Read Its What You Ignore (Scott Hanselman video)    I highly recommend Scott Hanselman’s video above and this post before continuing with this article.  It is well worth the 40+ mins price of admission for the video and couple minutes for article.  One key takeaway for me was listing out my activities in an average week and realizing which ones held little or no value to me.  We all have a finite amount of time to work each day.  Do you know how much time and effort you spend on various aspects of your life (family, friends, religion, work, personal happiness, etc.)?  Do your actions and commitments reflect your priorities?    The biggest time consumers with little value for me were time spent on social media services (Twitter and Facebook), playing an MMO video game, and watching TV.  I still check up on Facebook, Twitter, Microsoft internal chat forums, and other services to keep contact with others but I’ve reduced that time significantly.  As for TV I’ve cut the cord and no longer subscribe to cable TV.  Instead I use Netflix, RedBox, and over the air channels but again with reduced time consumption.  With the time I’ve freed up I’m back to working out 2-3 times a week and reading 4 nights a week (both of which I had been neglecting previously).  I’ll mention a few tools for helping measure your time in the Tools section.   Processes    Do not multi-task.  I’ll say it again.  Do not multi-task.  There is no such thing as multi tasking.  The human brain is optimized to work on one thing at a time.  When you are “multi-tasking” you are really doing 2 or more things at less than 100%, usually by a wide margin.  I take pride in my work and when I’m doing something less than 100% the results typically degrade rapidly.    Now there are some ways of bending the rules of physics for this one.  There is the notion of getting a double amount of work done in the same timeframe.  Some examples would be listening to podcasts / watching a movie while working out, using a treadmill as your work desk, or reading while in the bathroom.    Personally I’ve found good results in combining one task that does not require focus (making dinner, playing certain video games, working out) and one task that does (watching a movie, listening to podcasts).  I believe this is related to me being a visual and kinesthetic (using my hands or actually doing it) learner.  I’m terrible with auditory learning.  My fiance and I joke that sometimes we talk and talk to each other but never really hear each other.   Goals / Tasks    Goals can give us direction in life and a sense of accomplishment when we complete them.  Goals can also overwhelm us and give us a sense of failure when we don’t complete them.  I propose that you shift your perspective and not dwell on all of the things that you haven’t gotten done, but focus instead on regularly setting measureable goals that are within reason of accomplishing.    At the end of each time frame have a retrospective to review your progress.  Do not feel guilty about what you did not accomplish.  Feel proud of what you did accomplish and readjust your goals for the next time frame to more attainable goals.  Here is a sample schedule I’ve seen proposed by some.  I have not consistently set goals for each timeframe, but I do typically set 3 small goals a day (this blog post is #2 for today). Each day set 3 small goals Each week set 3 medium goals Each month set 1 large goal Each year set 2 very large goals   Tools    Tools are an extension of our human body.  They help us extend beyond what we can physically and mentally do.  Below are some tools I use almost daily or have found useful as of late. Disclaimer: I am not getting endorsed to promote any of these products.  I just happen to like them and find them useful. Instapaper – Save internet links for reading later.  There are many tools like this but I’ve found this to be a great one.  There is even a “read it later” JavaScript button you can add to your browser so when you navigate to a site it will then add this to your list. Stacks for Instapaper – A Windows Phone 7 app for reading my Instapaper articles on the go.  It does require a subscription to Instapaper (nominal $3 every three months) but is easily worth the cost.  Alternatively you can set up your Kindle to sync with Instapaper easily but I haven’t done so. SlapDash Podcast – Apps for Windows Phone and  Windows 8 (possibly other platforms) to sync podcast viewing / listening across multiple devices.  Now that I have my Surface RT device (which I love) this is making my consumption easier to manage. Feed Reader – Simple Windows 8 app for quickly catching up on my RSS feeds.  I used to have hundreds of unread items all the time.  Now I’m down to 20-50 regularly and it is much easier and faster to consume on my Surface RT.  There is also a free version (which I use) and I can’t see much different between the free and paid versions currently. Rescue Time – Have you ever wondered how much time you’ve spent on websites vs. email vs. “doing work”?  This service tracks your computer actions and then lets you report on them.  This can help you quantitatively identify areas where your actions are not in line with your priorities. PowerShell – Windows automation tool.  It is now built into every client and server OS.  This tool has saved me days (and I mean the full 24 hrs worth) of time and effort in the past year alone.  If you haven’t started learning PowerShell and you administrating any Windows OS or server product you need to start today. Various blogging tools – I wrote a post a couple years ago called How I Blog about my blogging process and tools used.  Almost all of it still applies today.   Personal Health    Some of these may be common sense or debatable, but I’ve found them to help prioritize my daily activities. Get plenty of sleep on a regular basis.  Sacrificing sleep too many nights a week negatively impacts your cognition, attitude, and overall health. Exercise at least three days.  Exercise could be lifting weights, taking the stairs up multiple flights of stairs, walking for 20 mins, or a number of other "non-traditional” activities.  I find that regular exercise helps with sleep and improves my overall attitude. Eat a well balanced diet.  Too much sugar, caffeine, junk food, etc. are not good for your body.  This is not a matter of losing weight but taking care of your body and helping you perform at your peak potential.   Email    Email can be one of the biggest time consumers (i.e. waster) if you aren’t careful. Time box your email usage.  Set a meeting invite for yourself if necessary to limit how much time you spend checking email. Use rules to prioritize your email.  Email from external customers, my manager, or include me directly on the To line go into my inbox.  Everything else goes a level down and I have 30+ rules to further sort it, mostly distribution lists. Use keyboard shortcuts (when available).  I use Outlook for my primary email and am constantly hitting Alt + S to send, Ctrl + 1 for my inbox, Ctrl + 2 for my calendar, Space / Tab / Shift + Tab to mark items as read, and a number of other useful commands.  Learn them and you’ll see your speed getting through emails increase. Keep emails short.  No one Few people like reading through long emails.  The first line should state exactly why you are sending the email followed by a 3-4 lines to support it.  Anything longer might be better suited as a phone call or in person discussion.   Conclusion    In this post I walked through various tips and tricks I’ve found for improving personal productivity.  It is a mix of re-focusing on the things that matter, using tools to assist in your efforts, and cutting out actions that are not aligned with your priorities.  I originally had a whole section on keyboard shortcuts, but with my recent purchase of the Surface RT I’m finding that touch gestures have replaced numerous keyboard commands that I used to need.  I see a big future in touch enabled devices.  Hopefully some of these tips help you out.  If you have any tools, tips, or ideas you would like to share feel free to add in the comments section.         -Frog Out   Links Scott Hanselman Productivity posts http://www.hanselman.com/blog/CategoryView.aspx?category=Productivity Overcome your work addiction http://blogs.hbr.org/hbsfaculty/2012/05/overcome-your-work-addiction.html?awid=5512355740280659420-3271   Millennials paralyzed by choice http://priyaparker.com/blog/millennials-paralyzed-by-choice   Its Not What You Read Its What You Ignore (video) http://www.hanselman.com/blog/ItsNotWhatYouReadItsWhatYouIgnoreVideoOfScottHanselmansPersonalProductivityTips.aspx   Cutting the cord – Jeff Blankenburg http://www.jeffblankenburg.com/2011/04/06/cutting-the-cord/   Building a sitting standing desk – Eric Harlan http://www.ericharlan.com/Everything_Else/building-a-sitting-standing-desk-a229.html   Instapaper http://www.instapaper.com/u   Stacks for Instapaper http://www.stacksforinstapaper.com/   Slapdash Podcast Windows Phone -  http://www.windowsphone.com/en-us/store/app/slapdash-podcasts/90e8b121-080b-e011-9264-00237de2db9e Windows 8 - http://apps.microsoft.com/webpdp/en-us/app/slapdash-podcasts/0c62e66a-f2e4-4403-af88-3430a821741e/m/ROW   Feed Reader http://apps.microsoft.com/webpdp/en-us/app/feed-reader/d03199c9-8e08-469a-bda1-7963099840cc/m/ROW   Rescue Time http://www.rescuetime.com/   PowerShell Script Center http://technet.microsoft.com/en-us/scriptcenter/bb410849.aspx

  Read the article

• Mr Flibble: As Seen Through a Lens, Darkly

  - by Phil Factor

  One of the rewarding things about getting involved with Simple-Talk has been in meeting and working with some pretty daunting talents. I’d like to say that Dom Reed’s talents are at the end of the visible spectrum, but then there is Richard, who pops up on national radio occasionally, presenting intellectual programs, Andrew, master of the ukulele, with his pioneering local history work, and Tony with marathon running and his past as a university lecturer. However, Dom, who is Red Gate’s head of creative design and who did the preliminary design work for Simple-Talk, has taken the art photography to an extreme that was impossible before Photoshop. He’s not the first person to take a photograph of himself every day for two years, but he is definitely the first to weave the results into a frightening narrative that veers from comedy to pathos, using all the arts of Photoshop to create a fictional character, Mr Flibble.   Have a look at some of the Flickr pages. Uncle Spike The B-Men – Woolverine The 2011 BoyZ iN Sink reunion tour turned out to be their last Error 404 – Flibble not found Mr Flibble is not a normal type of alter-ego. We generally prefer to choose bronze age warriors of impossibly magnificent physique and stamina; superheroes who bestride the world, scorning the forces of evil and anarchy in a series noble and righteous quests. Not so Dom, whose Mr Flibble is vulnerable, and laid low by an addiction to toxic substances. His work has gained an international cult following and is used as course material by several courses in photography. Although his work was for a while ignored by the more conventional world of ‘art’ photography they became famous through the internet. His photos have received well over a million views on Flickr. It was definitely time to turn this work into a book, because the whole sequence of images has its maximum effect when seen in sequence. He has a Kickstarter project page, one of the first following the recent UK launch of the crowdfunding platform. The publication of the book should be a major event and the £45 I shall divvy up will be one of the securest investments I shall ever make. The local news in Cambridge picked up on the project and I can quote from the report by the excellent Cabume website , the source of Tech news from the ‘Cambridge cluster’ Put really simply Mr Flibble likes to dress up and take pictures of himself. One of the benefits of a split personality, however is that Mr Flibble is supported in his endeavour by Reed’s top notch photography skills, supreme mastery of Photoshop and unflinching dedication to the cause. The duo have collaborated to take a picture every day for the past 730-plus days. It is not a big surprise that neither Mr Flibble nor Reed watches any TV: In addition to his full-time role at Cambridge software house,Red Gate Software as head of creativity and the two to five hours a day he spends taking the Mr Flibble shots, Reed also helps organise the . And now Reed is using Kickstarter to see if the world is ready for a Mr Flibble coffee table book. Judging by the early response it is. At the time of writing, just a few days after it went live, ‘I Drink Lead Paint: An absurd photography book by Mr Flibble’ had raised £1,545 of the £10,000 target it needs to raise by the Friday 30 November deadline from 37 backers. Following the standard Kickstarter template, Reed is offering a series of rewards based on the amount pledged, ranging from a Mr Flibble desktop wallpaper for pledges of £5 or more to a signed copy of the book for pledges of £45 or more, right up to a starring role in the book for £1,500. Mr Flibble is unquestionably one of the more deranged Kickstarter hopefuls, but don’t think for a second that he doesn’t have a firm grasp on the challenges he faces on the road to immortalisation on 150 gsm stock. Under the section ‘risks and challenges’ on his Kickstarter page his statement begins: “An angry horde of telepathic iguanas discover the world’s last remaining stock of vintage lead paint and hold me to ransom. Gosh how I love to guzzle lead paint. Anyway… faced with such brazen bravado, I cower at the thought of taking on their combined might and die a sad and lonely Flibble deprived of my one and only true liquid love.” At which point, Reed manages to wrestle away the keyboard, giving him the opportunity to present slightly more cogent analysis of the obstacles the project must still overcome. We asked Reed a few questions about Mr Flibble’s Kickstarter adventure and felt that his responses were worth publishing in full: Firstly, how did you manage it – holding down a full time job and also conceiving and executing these ideas on a daily basis? I employed a small team of ferocious gerbils to feed me ideas on a daily basis. Whilst most of their ideas were incomprehensibly rubbish and usually revolved around food, just occasionally they’d give me an idea like my B-Men series. As a backup plan though, I found that the best way to generate ideas was to actually start taking photos. If I were to stand in front of the camera, pull a silly face, place a vegetable on my head or something else equally stupid, the resulting photo of that would typically spark an idea when I came to look at it. Sitting around idly trying to think of an idea was doomed to result in no ideas. I admit that I really struggled with time. I’m proud that I never missed a day, but it was definitely hard when you were late from work, tired or doing something socially on the same day. I don’t watch TV, which I guess really helps, because I’d frequently be spending 2-5 hours taking and processing the photos every day. Are there any overlaps between software development and creative thinking? Software is an inherently creative business and the speed that it moves ensures you always have to find solutions to new things. Everyone in the team needs to be a problem solver. Has it helped me specifically with my photography? Probably. Working within teams that continually need to figure out new stuff keeps the brain feisty I suppose, and I guess I’m continually exposed to a lot of possible sources of inspiration. How specifically will this Kickstarter project allow you to test the commercial appeal of your work and do you plan to get the book into shops? It’s taken a while to be confident saying it, but I know that people like the work that I do. I’ve had well over a million views of my pictures, many humbling comments and I know I’ve garnered some loyal fans out there who anticipate my next photo. For me, this Kickstarter is about seeing if there’s worth to my work beyond just making people smile. In an online world where there’s an abundance of freely available content, can you hope to receive anything from what you do, or would people just move onto the next piece of content if you happen to ask for some support? A book has been the single-most requested thing that people have asked me to produce and it’s something that I feel would showcase my work well. It’s just hard to convince people in the publishing industry just now to take any kind of risk – they’ve been hit hard. If I can show that people would like my work enough to buy a book, then it sends a pretty clear picture that publishers might hear, or it gives me the confidence enough to invest in myself a bit more – hard to do when you’re riddled with self-doubt! I’d love to see my work in the shops, yes. I could see it being the thing that someone flips through idly as they’re Christmas shopping and recognizing that it’d be just the perfect gift for their difficult to buy for friend or relative. That said, working in the software industry means I’m clearly aware of how I could use technology to distribute my work, but I can’t deny that there’s something very appealing to having a physical thing to hold in your hands. If the project is successful is there a chance that it could become a full-time job? At the moment that seems like a distant dream, as should this be successful, there are many more steps I’d need to take to reach any kind of business viability. Kickstarter seems exactly that – a way for people to help kick start me into something that could take off. If people like my work and want me to succeed with it, then taking a look at my Kickstarter page (and hopefully pledging a bit of support) would make my elbows blush considerably. So there is is. An opportunity to open the wallet just a bit to ensure that one of the more unusual talents sees the light in the format it deserves.  

  Read the article

• T-SQL Tuesday #33: Trick Shots: Undocumented, Underdocumented, and Unknown Conspiracies!

  - by Most Valuable Yak (Rob Volk)

  Mike Fal (b | t) is hosting this month's T-SQL Tuesday on Trick Shots.  I love this choice because I've been preoccupied with sneaky/tricky/evil SQL Server stuff for a long time and have been presenting on it for the past year.  Mike's directives were "Show us a cool trick or process you developed…It doesn’t have to be useful", which most of my blogging definitely fits, and "Tell us what you learned from this trick…tell us how it gave you insight in to how SQL Server works", which is definitely a new concept.  I've done a lot of reading and watching on SQL Server Internals and even attended training, but sometimes I need to go explore on my own, using my own tools and techniques.  It's an itch I get every few months, and, well, it sure beats workin'. I've found some people to be intimidated by SQL Server's internals, and I'll admit there are A LOT of internals to keep track of, but there are tons of excellent resources that clearly document most of them, and show how knowing even the basics of internals can dramatically improve your database's performance.  It may seem like rocket science, or even brain surgery, but you don't have to be a genius to understand it. Although being an "evil genius" can help you learn some things they haven't told you about. ;) This blog post isn't a traditional "deep dive" into internals, it's more of an approach to find out how a program works.  It utilizes an extremely handy tool from an even more extremely handy suite of tools, Sysinternals.  I'm not the only one who finds Sysinternals useful for SQL Server: Argenis Fernandez (b | t), Microsoft employee and former T-SQL Tuesday host, has an excellent presentation on how to troubleshoot SQL Server using Sysinternals, and I highly recommend it.  Argenis didn't cover the Strings.exe utility, but I'll be using it to "hack" the SQL Server executable (DLL and EXE) files. Please note that I'm not promoting software piracy or applying these techniques to attack SQL Server via internal knowledge. This is strictly educational and doesn't reveal any proprietary Microsoft information.  And since Argenis works for Microsoft and demonstrated Sysinternals with SQL Server, I'll just let him take the blame for it. :P (The truth is I've used Strings.exe on SQL Server before I ever met Argenis.) Once you download and install Strings.exe you can run it from the command line.  For our purposes we'll want to run this in the Binn folder of your SQL Server instance (I'm referencing SQL Server 2012 RTM): cd "C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn" C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.dll > sqldll.txt C:\Program Files\Microsoft SQL Server\MSSQL11\MSSQL\Binn> strings *sql*.exe > sqlexe.txt   I've limited myself to DLLs and EXEs that have "sql" in their names.  There are quite a few more but I haven't examined them in any detail. (Homework assignment for you!) If you run this yourself you'll get 2 text files, one with all the extracted strings from every SQL DLL file, and the other with the SQL EXE strings.  You can open these in Notepad, but you're better off using Notepad++, EditPad, Emacs, Vim or another more powerful text editor, as these will be several megabytes in size. And when you do open it…you'll find…a TON of gibberish.  (If you think that's bad, just try opening the raw DLL or EXE file in Notepad.  And by the way, don't do this in production, or even on a running instance of SQL Server.)  Even if you don't clean up the file, you can still use your editor's search function to find a keyword like "SELECT" or some other item you expect to be there.  As dumb as this sounds, I sometimes spend my lunch break just scanning the raw text for anything interesting.  I'm boring like that. Sometimes though, having these files available can lead to some incredible learning experiences.  For me the most recent time was after reading Joe Sack's post on non-parallel plan reasons.  He mentions a new SQL Server 2012 execution plan element called NonParallelPlanReason, and demonstrates a query that generates "MaxDOPSetToOne".  Joe (formerly on the Microsoft SQL Server product team, so he knows this stuff) mentioned that this new element was not currently documented and tried a few more examples to see what other reasons could be generated. Since I'd already run Strings.exe on the SQL Server DLLs and EXE files, it was easy to run grep/find/findstr for MaxDOPSetToOne on those extracts.  Once I found which files it belonged to (sqlmin.dll) I opened the text to see if the other reasons were listed.  As you can see in my comment on Joe's blog, there were about 20 additional non-parallel reasons.  And while it's not "documentation" of this underdocumented feature, the names are pretty self-explanatory about what can prevent parallel processing. I especially like the ones about cursors – more ammo! - and am curious about the PDW compilation and Cloud DB replication reasons. One reason completely stumped me: NoParallelHekatonPlan.  What the heck is a hekaton?  Google and Wikipedia were vague, and the top results were not in English.  I found one reference to Greek, stating "hekaton" can be translated as "hundredfold"; with a little more Wikipedia-ing this leads to hecto, the prefix for "one hundred" as a unit of measure.  I'm not sure why Microsoft chose hekaton for such a plan name, but having already learned some Greek I figured I might as well dig some more in the DLL text for hekaton.  Here's what I found: hekaton_slow_param_passing Occurs when a Hekaton procedure call dispatch goes to slow parameter passing code path The reason why Hekaton parameter passing code took the slow code path hekaton_slow_param_pass_reason sp_deploy_hekaton_database sp_undeploy_hekaton_database sp_drop_hekaton_database sp_checkpoint_hekaton_database sp_restore_hekaton_database e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\hkproc.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matgen.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\matquery.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\sqlmeta.cpp e:\sql11_main_t\sql\ntdbms\hekaton\sqlhost\sqllang\resultset.cpp Interesting!  The first 4 entries (in red) mention parameters and "slow code".  Could this be the foundation of the mythical DBCC RUNFASTER command?  Have I been passing my parameters the slow way all this time? And what about those sp_xxxx_hekaton_database procedures (in blue)? Could THEY be the secret to a faster SQL Server? Could they promise a "hundredfold" improvement in performance?  Are these special, super-undocumented DIB (databases in black)? I decided to look in the SQL Server system views for any objects with hekaton in the name, or references to them, in hopes of discovering some new code that would answer all my questions: SELECT name FROM sys.all_objects WHERE name LIKE '%hekaton%' SELECT name FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%hekaton%' Which revealed: name ------------------------ (0 row(s) affected) name ------------------------ sp_createstats sp_recompile sp_updatestats (3 row(s) affected)   Hmm.  Well that didn't find much.  Looks like these procedures are seriously undocumented, unknown, perhaps forbidden knowledge. Maybe a part of some unspeakable evil? (No, I'm not paranoid, I just like mysteries and thought that punching this up with that kind of thing might keep you reading.  I know I'd fall asleep without it.) OK, so let's check out those 3 procedures and see what they reveal when I search for "Hekaton": sp_createstats: -- filter out local temp tables, Hekaton tables, and tables for which current user has no permissions -- Note that OBJECTPROPERTY returns NULL on type="IT" tables, thus we only call it on type='U' tables   OK, that's interesting, let's go looking down a little further: ((@table_type<>'U') or (0 = OBJECTPROPERTY(@table_id, 'TableIsInMemory'))) and -- Hekaton table   Wellllll, that tells us a few new things: There's such a thing as Hekaton tables (UPDATE: I'm not the only one to have found them!) They are not standard user tables and probably not in memory UPDATE: I misinterpreted this because I didn't read all the code when I wrote this blog post. The OBJECTPROPERTY function has an undocumented TableIsInMemory option Let's check out sp_recompile: -- (3) Must not be a Hekaton procedure.   And once again go a little further: if (ObjectProperty(@objid, 'IsExecuted') <> 0 AND ObjectProperty(@objid, 'IsInlineFunction') = 0 AND ObjectProperty(@objid, 'IsView') = 0 AND -- Hekaton procedure cannot be recompiled -- Make them go through schema version bumping branch, which will fail ObjectProperty(@objid, 'ExecIsCompiledProc') = 0)   And now we learn that hekaton procedures also exist, they can't be recompiled, there's a "schema version bumping branch" somewhere, and OBJECTPROPERTY has another undocumented option, ExecIsCompiledProc.  (If you experiment with this you'll find this option returns null, I think it only works when called from a system object.) This is neat! Sadly sp_updatestats doesn't reveal anything new, the comments about hekaton are the same as sp_createstats.  But we've ALSO discovered undocumented features for the OBJECTPROPERTY function, which we can now search for: SELECT name, object_definition(OBJECT_ID) FROM sys.all_objects WHERE object_definition(OBJECT_ID) LIKE '%OBJECTPROPERTY(%'   I'll leave that to you as more homework.  I should add that searching the system procedures was recommended long ago by the late, great Ken Henderson, in his Guru's Guide books, as a great way to find undocumented features.  That seems to be really good advice! Now if you're a programmer/hacker, you've probably been drooling over the last 5 entries for hekaton (in green), because these are the names of source code files for SQL Server!  Does this mean we can access the source code for SQL Server?  As The Oracle suggested to Neo, can we return to The Source??? Actually, no. Well, maybe a little bit.  While you won't get the actual source code from the compiled DLL and EXE files, you'll get references to source files, debugging symbols, variables and module names, error messages, and even the startup flags for SQL Server.  And if you search for "DBCC" or "CHECKDB" you'll find a really nice section listing all the DBCC commands, including the undocumented ones.  Granted those are pretty easy to find online, but you may be surprised what those web sites DIDN'T tell you! (And neither will I, go look for yourself!)  And as we saw earlier, you'll also find execution plan elements, query processing rules, and who knows what else.  It's also instructive to see how Microsoft organizes their source directories, how various components (storage engine, query processor, Full Text, AlwaysOn/HADR) are split into smaller modules. There are over 2000 source file references, go do some exploring! So what did we learn?  We can pull strings out of executable files, search them for known items, browse them for unknown items, and use the results to examine internal code to learn even more things about SQL Server.  We've even learned how to use command-line utilities!  We are now 1337 h4X0rz!  (Not really.  I hate that leetspeak crap.) Although, I must confess I might've gone too far with the "conspiracy" part of this post.  I apologize for that, it's just my overactive imagination.  There's really no hidden agenda or conspiracy regarding SQL Server internals.  It's not The Matrix.  It's not like you'd find anything like that in there: Attach Matrix Database DM_MATRIX_COMM_PIPELINES MATRIXXACTPARTICIPANTS dm_matrix_agents   Alright, enough of this paranoid ranting!  Microsoft are not really evil!  It's not like they're The Borg from Star Trek: ALTER FEDERATION DROP ALTER FEDERATION SPLIT DROP FEDERATION   #tsql2sday

  Read the article

• Professional Scrum Developer (.NET) Training in London

  - by Martin Hinshelwood

  On the 26th - 30th July in Microsoft’s offices in London Adam Cogan from SSW will be presenting the first Professional Scrum Developer course in the UK. I will be teaching this course along side Adam and it is a fantastic experience. You are split into teams and go head-to-head to deliver units of potentially shippable work in four two hour sprints. The Professional Scrum Developer course is the only course endorsed by both Microsoft and Ken Schwaber and they have worked together very effectively in brining this course to fruition. This course is the brain child of Richard Hundhausen, a Microsoft Regional Director, and both Adam and I attending the Trainer Prep in Sydney when he was there earlier this year. He is a fantastic trainer and no matter where you do this course you can be safe in the knowledge that he has trained and vetted all of the teachers. A tools version of Ken if you will Find a course and register Download this syllabus Download the Scrum Guide What is the Professional Scrum Developer course all about? Professional Scrum Developer course is a unique and intensive five-day experience for software developers. The course guides teams on how to turn product requirements into potentially shippable increments of software using the Scrum framework, Visual Studio 2010, and modern software engineering practices. Attendees will work in self-organizing, self-managing teams using a common instance of Team Foundation Server 2010. Who should attend this course? This course is suitable for any member of a software development team – architect, programmer, database developer, tester, etc. Entire teams are encouraged to attend and experience the course together, but individuals are welcome too. Attendees will self-organize to form cross-functional Scrum teams. These teams require an aggregate of skills specific to the selected case study. Please see the last page of this document for specific details. Product Owners, ScrumMasters, and other stakeholders are welcome too, but keep in mind that everyone who attends will be expected to commit to work and pull their weight on a Scrum team. What should you know by the end of the course? Scrum will be experienced through a combination of lecture, demonstration, discussion, and hands-on exercises. Attendees will learn how to do Scrum correctly while being coached and critiqued by the instructor, in the following topic areas: Form effective teams Explore and understand legacy “Brownfield” architecture Define quality attributes, acceptance criteria, and “done” Create automated builds How to handle software hotfixes Verify that bugs are identified and eliminated Plan releases and sprints Estimate product backlog items Create and manage a sprint backlog Hold an effective sprint review Improve your process by using retrospectives Use emergent architecture to avoid technical debt Use Test Driven Development as a design tool Setup and leverage continuous integration Use Test Impact Analysis to decrease testing times Manage SQL Server development in an Agile way Use .NET and T-SQL refactoring effectively Build, deploy, and test SQL Server databases Create and manage test plans and cases Create, run, record, and play back manual tests Setup a branching strategy and branch code Write more maintainable code Identify and eliminate people and process dysfunctions Inspect and improve your team’s software development process What does the week look like? This course is a mix of lecture, demonstration, group discussion, simulation, and hands-on software development. The bulk of the course will be spent working as a team on a case study application delivering increments of new functionality in mini-sprints. Here is the week at a glance: Monday morning and most of the day Friday will be spent with the computers powered off, so you can focus on sharpening your game of Scrum and avoiding the common pitfalls when implementing it. The Sprints Timeboxing is a critical concept in Scrum as well as in this course. We expect each team and student to understand and obey all of the timeboxes. The timebox duration will always be clearly displayed during each activity. Expect the instructor to enforce it. Each of the ½ day sprints will roughly follow this schedule: Component Description Minutes Instruction Presentation and demonstration of new and relevant tools & practices 60 Sprint planning meeting Product owner presents backlog; each team commits to delivering functionality 10 Sprint planning meeting Each team determines how to build the functionality 10 The Sprint The team self-organizes and self-manages to complete their tasks 120 Sprint Review meeting Each team will present their increment of functionality to the other teams = 30 Sprint Retrospective A group retrospective meeting will be held to inspect and adapt 10 Each team is expected to self-organize and manage their own work during the sprint. Pairing is highly encouraged. The instructor/product owner will be available if there are questions or impediments, but will be hands-off by default. You should be prepared to communicate and work with your team members in order to achieve your sprint goal. If you have development-related questions or get stuck, your partner or team should be your first level of support. Module 1: INTRODUCTION This module provides a chance for the attendees to get to know the instructors as well as each other. The Professional Scrum Developer program, as well as the day by day agenda, will be explained. Finally, the Scrum team will be selected and assembled so that the forming, storming, norming, and performing can begin. Trainer and student introductions Professional Scrum Developer program Agenda Logistics Team formation Retrospective Module 2: SCRUMDAMENTALS This module provides a level-setting understanding of the Scrum framework including the roles, timeboxes, and artifacts. The team will then experience Scrum firsthand by simulating a multi-day sprint of product development, including planning, review, and retrospective meetings. Scrum overview Scrum roles Scrum timeboxes (ceremonies) Scrum artifacts Simulation Retrospective It’s required that you read Ken Schwaber’s Scrum Guide in preparation for this module and course. MODULE 3: IMPLEMENTING SCRUM IN VISUAL STUDIO 2010 This module demonstrates how to implement Scrum in Visual Studio 2010 using a Scrum process template*. The team will learn the mapping between the Scrum concepts and how they are implemented in the tool. After connecting to the shared Team Foundation Server, the team members will then return to the simulation – this time using Visual Studio to manage their product development. Mapping Scrum to Visual Studio 2010 User Story work items Task work items Bug work items Demonstration Simulation Retrospective Module 4: THE CASE STUDY In this module the team is introduced to their problem domain for the week. A kickoff meeting by the Product Owner (the instructor) will set the stage for the why and what that will take during the upcoming sprints. The team will then define the quality attributes of the project and their definition of “done.” The legacy application code will be downloaded, built, and explored, so that any bugs can be discovered and reported. Introduction to the case study Download the source code, build, and explore the application Define the quality attributes for the project Define “done” How to file effective bugs in Visual Studio 2010 Retrospective Module 5: HOTFIX This module drops the team directly into a Brownfield (legacy) experience by forcing them to analyze the existing application’s architecture and code in order to locate and fix the Product Owner’s high-priority bug(s). The team will learn best practices around finding, testing, fixing, validating, and closing a bug. How to use Architecture Explorer to visualize and explore Create a unit test to validate the existence of a bug Find and fix the bug Validate and close the bug Retrospective Module 6: PLANNING This short module introduces the team to release and sprint planning within Visual Studio 2010. The team will define and capture their goals as well as other important planning information. Release vs. Sprint planning Release planning and the Product Backlog Product Backlog prioritization Acceptance criteria and tests Sprint planning and the Sprint Backlog Creating and linking Sprint tasks Retrospective At this point the team will have the knowledge of Scrum, Visual Studio 2010, and the case study application to begin developing increments of potentially shippable functionality that meet their definition of done. Module 7: EMERGENT ARCHITECTURE This module introduces the architectural practices and tools a team can use to develop a valid design on which to develop new functionality. The teams will learn how Scrum supports good architecture and design practices. After the discussion, the teams will be presented with the product owner’s prioritized backlog so that they may select and commit to the functionality they can deliver in this sprint. Architecture and Scrum Emergent architecture Principles, patterns, and practices Visual Studio 2010 modeling tools UML and layer diagrams SPRINT 1 Retrospective Module 8: TEST DRIVEN DEVELOPMENT This module introduces Test Driven Development as a design tool and how to implement it using Visual Studio 2010. To maximize productivity and quality, a Scrum team should setup Continuous Integration to regularly build every team member’s code changes and run regression tests. Refactoring will also be defined and demonstrated in combination with Visual Studio’s Test Impact Analysis to efficiently re-run just those tests which were impacted by refactoring. Continuous integration Team Foundation Build Test Driven Development (TDD) Refactoring Test Impact Analysis SPRINT 2 Retrospective Module 9: AGILE DATABASE DEVELOPMENT This module lets the SQL Server database developers in on a little secret – they can be agile too. By using the database projects in Visual Studio 2010, the database developers can join the rest of the team. The students will see how to apply Agile database techniques within Visual Studio to support the SQL Server 2005/2008/2008R2 development lifecycle. Agile database development Visual Studio database projects Importing schema and scripts Building and deploying Generating data Unit testing SPRINT 3 Retrospective Module 10: SHIP IT Teams need to know that just because they like the functionality doesn’t mean the Product Owner will. This module revisits acceptance criteria as it pertains to acceptance testing. By refining acceptance criteria into manual test steps, team members can execute the tests, recording the results and reporting bugs in a number of ways. Manual tests will be defined and executed using the Microsoft Test Manager tool. As the Sprint completes and an increment of functionality is delivered, the team will also learn why and when they should create a branch of the codeline. Acceptance criteria Testing in Visual Studio 2010 Microsoft Test Manager Writing and running manual tests Branching SPRINT 4 Retrospective Module 11: OVERCOMING DYSFUNCTION This module introduces the many types of people, process, and tool dysfunctions that teams face in the real world. Many dysfunctions and scenarios will be identified, along with ideas and discussion for how a team might mitigate them. This module will enable you and your team to move toward independence and improve your game of Scrum when you depart class. Scrum-butts and flaccid Scrum Best practices working as a team Team challenges ScrumMaster challenges Product Owner challenges Stakeholder challenges Course Retrospective What will be expected of you and you team? This is a unique course in that it’s technically-focused, team-based, and employs timeboxes. It demands that the members of the teams self-organize and self-manage their own work to collaboratively develop increments of software. All attendees must commit to: Pay attention to all lectures and demonstrations Participate in team and group discussions Work collaboratively with other team members Obey the timebox for each activity Commit to work and do your best to deliver All teams should have these skills: Understanding of Scrum Familiarity with Visual Studio 201 C#, .NET 4.0 & ASP.NET 4.0 experience*  SQL Server 2008 development experience Software testing experience * Check with the instructor ahead of time for the exact technologies Self-organising teams Another unique attribute of this course is that it’s a technical training class being delivered to teams of developers, not pairs, and not individuals. Ideally, your actual software development team will attend the training to ensure that all necessary skills are covered. However, if you wish to attend an open enrolment course alone or with just a couple of colleagues, realize that you may be placed on a team with other attendees. The instructor will do his or her best to ensure that each team is cross-functional to tackle the case study, but there are no guarantees. You may be required to try a new role, learn a new skill, or pair with somebody unfamiliar to you. This is just good Scrum! Who should NOT take this course? Because of the nature of this course, as explained above, certain types of people should probably not attend this course: Students requiring command and control style instruction – there are no prescriptive/step-by-step (think traditional Microsoft Learning) labs in this course Students who are unwilling to work within a timebox Students who are unwilling to work collaboratively on a team Students who don’t have any skill in any of the software development disciplines Students who are unable to commit fully to their team – not only will this diminish the student’s learning experience, but it will also impact their team’s learning experience Find a course and register Download this syllabus Download the Scrum Guide Technorati Tags: Scrum,SSW,Pro Scrum Dev

  Read the article

• CodePlex Daily Summary for Saturday, May 12, 2012

  CodePlex Daily Summary for Saturday, May 12, 2012Popular ReleasesKanboxAPI: KanboxAPI beta: ????? Token Info List DownloadMedia Companion: Media Companion 3.502b: It has been a slow week, but this release addresses a couple of recent bugs: Movies Multi-part Movies - Existing .nfo files that differed in name from the first part, were missed and scraped again. Trailers - MC attempted to scrape info for existing trailers. TV Shows Show Scraping - shows available only in the non-default language would not show up in the main browser. The correct language can now be selected using the TV Show Selector for a single show. General Will no longer prompt for ...NewLife XCode ??????: XCode v8.5.2012.0508、XCoder v4.7.2012.0320: X????： 1，????For .Net 4.0?? XCoder????： 1，???????，????X????，?????? XCode????： 1，Insert/Update/Delete???????????????，???SQL???? 2，IEntityOperate?????? 3，????????IEntityTree 4，????????????????? 5，?????????? 6，??????????????dycom: v1.0: DYCom ????????：Silverlight, Windows phone 7.5.NETMF_for_STM32: Beta 1 Release: First public beta release.Google Book Downloader: Google Books Downloader Lite 1.0: Google Books Downloader Lite 1.0Python Tools for Visual Studio: 1.5 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports Cpython, IronPython, Jython and Pypy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 1: JayData 1.0.0 RC1 Refresh 1 JayData is a unified data access API to webSQL, indexedDB, OData, Facebook and YQL. Overview The major feature of this release is related to OData provider, FunctionImport is now generally supported. Now you can consume OData service operations (WebMethods). We extended the JaySvcUtil to generate the necessary metadata. We included many fixes, such as the Visual Studio 2010 IntelliSense optimalization (RC1 was optimized only to VS11). It's recommended to upgrade...AD Gallery: AD Gallery 1.2.7: NewsFixed a bug which caused the current thumbnail not to be highlighted Added a hook to take complete control over how descriptions are handled, take a look under Documentation for more info Added removeAllImages()51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.4.8: One Click Install from NuGet Data ChangesIncludes 42 new browser properties in both the Lite and Premium data sets. Premium Data includes many new devices including Nokia Lumia 900, BlackBerry 9220 and HTC One, the Samsung Galaxy Tab 2 range and Samsung Galaxy S III. Lite data includes devices released in January 2012. Changes to Version 2.1.4.81. The IsFirstTime method of the RedirectModule will now return the same value when called multiple times for the same request. This was prevent...Mugen Injection: Mugen Injection ver 2.2 (WinRT supported): Added NamedParameterAttribute, OptionalParameterAttribute. Added behaviors ICycleDependencyBehavior, IResolveUnregisteredTypeBehavior. Added WinRT support. Added support for NET 4.5. Added support for MVC 4.NShape - .Net Diagramming Framework for Industrial Applications: NShape 2.0.1: Changes in 2.0.1:Bugfixes: IRepository.Insert(Shape shape) and IRepository.Insert(IEnumerable<Shape> shapes) no longer insert shape connections. Several context menu items did display although the required permission was not granted Display did not reset the visible and active layers when changing the diagram NullReferenceException when pressing Del key and no shape was selected Changed Behavior: LayerCollection.Find("") no longer throws an exception. Improvements: Display does not rese...AcDown????? - Anime&Comic Downloader: AcDown????? v3.11.6: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...sb0t: sb0t 4.64: New commands added: #scribble <url> #adminscribble on #adminscribble offDocument.Editor: 2012.4: Whats new for Document.Editor 2012.4: Improved Template support Improved Options Dialog Minor Bug Fix's, improvements and speed upsJson.NET: Json.NET 4.5 Release 5: New feature - Added ItemIsReference, ItemReferenceLoopHandling, ItemTypeNameHandling, ItemConverterType to JsonPropertyAttribute New feature - Added ItemRequired to JsonObjectAttribute New feature - Added Path to JsonWriterException Change - Improved deserializer call stack memory usage Change - Moved the PDB files out of the NuGet package into a symbols package Fix - Fixed infinite loop from an input error when reading an array and error handling is enabled Fix - Fixed base objec...BlackJumboDog: Ver5.6.1: 2012.05.07 Ver5.6.1 (1)????????????????(Ver5.6.0??)??? (2)HTTP?????SSL????????????（Ver5.6.0??）??? (3)HTTP?????2G??????????????????????????? (4)HTP????　?????????ExtAspNet: ExtAspNet v3.1.5: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-05-06 v3.1.5 -????????：grid/grid_twogrid.aspx。 +?...SharpDevelop: SharpDevelop 4.2: Please see http://community.sharpdevelop.net/forums/t/15772.aspx for the release announcement.Desktop Google Reader: 1.4.4: Taskbar icon overlay (number of unread items) can now be switched off in preferences (Windows Vista / 7 only) Maximize button now can be toggled to be fullscreen (as befor) or only normal maximize (taskbar stays visible) in preferences List of feeds is now sorted by alphabetNew Projects3D Scene Editor: A generic 3d level editor built using XNA to speed up designing and building game levels.Attribute Based Cache using Unity Interception: Unity interception handler attribute for Caching which allows to apply boiler plate caching pattern to classes, and class members directly, without configuring them in the application configuration file. Configure your choice of Cache Provider (ObjectCache, Azure included) in the Unity IoC Container and apply the attribute to the method which you want to cache AutoCompleteBox for WinRT: None yetBAC2 Bachelor's Thesis Source Code: The source code of my Bachelor's ThesisBAMabase: It's a bamabase.BBSProject: BBSProjectBrain 2 - Game Engine: Brain 2 is a Game Engine that runs on multiple platforms.cobra-winldtp: Cobra - Windows version of Linux Desktop Testing Project (WinLDTP) - http://ldtp.freedesktop.org LDTP is a GUI test automation tool works on both Windows and Linux platform Windows GUI test automation tool written in C# and test scripts can be written in Python for now. Ruby API will be added soon.CS322: C# Programski jezikDoxBotPlugin: The DoxBotPlugin is a Plug-In for Ice-Chat9 that allows a user to use Icechat9 as both a normal IRC client and to switch on bot mode in certain channels to have DoxBotPlugin act on their behalf.dycom: DYCom??(DY Communication)???????????,?????????????????.????????????????. ??????????????????????,?????????????????。Eyes Protector: PL: Program pomagajacy w ochronie oczu przed przemeczeniem zwiazanym ze zbyt dluga praca przy komputerze. EN: ---kshell: ????Linux??????Lumia: This is Lumia project.MacroDoc: MacroDoc is an engine written in C# for composing documents from reusable pieces of structure and content.Mssql: This is Sql Server project.NETMF_for_STM32: This is the Codeplex project for NETMF for STM32 (F4 Edition). Ocular - a free, open source WYSIWYG editor for HTML: Ocular is a free C# WYSIWYG HTML editor, similar to Adobe Dreamweaver. We are always looking for contributors, so please help us!PeopleCredit: Prototype web service to maintain all employee credits.Project Server workflow: This workflow creates the project site for Basic project plan EPT when workflow task is approved.(This is the correction done over the Branching workflow provided with Project Server 2010 SDK). Workflow task is created using PSWApprovalTask Content type in Project Server Workflow Task List. Quick Reminder: PL: Program pomagajacy zapisac szybkie przypomnienia podczas pracy przy komputerze. EN: ---Random Projects: My random projects...Recommendation Engine Demo: How does the Amazon recommendation works? This is about visualizing the item to item collaborations filtering mechanism using a item-to-item matrix table. The item-to-item matrix, the vectors and the calculated data values are displayed. There are n different items and the item recommendation can display up to m items. There are implemented different item-to-item neighborhood functions. A simple max count of seen neighbor items, the Cosine Similarity and the Jaccard Index. A t...SaveSeaTurtle: Sea TurtleSharpGpx: SharpGpx implements an object model for reading and writing GPX (GPS eXchange Format).SlimDo: SlimDo is a scripting language coded in C#Spring: This is Spring.Net projectSQL Server Quick Tools Pack: SQL Server Quick Tools Pack for your sql server SuLD framework: Supported Link Discovery framework (SuLD) is a tool to discover links to multiple Linked Data datasets. Finding is supported by various features like synonym module or autocomplete.TQuery.Net: .Net??????WAAP - World of warcraft Auction house Analysis Project: A project in which we try to analyse prices and auctioneers on the various World of Warcraft Auction housesxhttp.net: The Xhttp.Net framework is a dotnet implementation of the Extended Hypertext Transfer Protocol (http://www.xhttp.org), with simple service integration, full arguments support including Base64 and DateTime, single and multiple asynchronous requests, data streaming, remote API creation from XHTTP service schemas, and a runtime plugin architecture.

  Read the article

• How I Record Screencasts

  - by Daniel Moth

  I get this asked a lot so here is my brain dump on the topic. What A screencast is just a demo that you present to yourself while recording the screen. As such, my advice for clearing your screen for demo purposes and setting up Visual Studio still applies here (adjusting for the fact I wrote those blog posts when I was running Vista and VS2008, not Windows 8 and VS2012). To see examples of screencasts, watch any of my screencasts on channel9. Why If you are a technical presenter, think of when you get best reactions from a developer audience in your sessions: when you are doing demos, of course. Imagine if you could package those alone and share them with folks to watch over and over? If you have ever gone through a tutorial trying to recreate steps to explore a feature, think how much more helpful it would be if you could watch a video and follow along. Think of how many folks you "touch" with a conference presentation, and how many more you can reach with an online shorter recording of the demo. If you invest so much of your time for the first type of activity, isn't the second type of activity also worth an investment? Fact: If you are able to record a screencast of a demo, you will be much better prepared to deliver it in person. In fact lately I will force myself to make a screencast of any demo I need to present live at an upcoming event. It is also a great backup - if for whatever reason something fails (software, network, etc) during an attempt of a live demo, you can just play the recorded video for the live audience. There are other reasons (e.g. internal sharing of the latest implemented feature) but the context above is the one within which I create most of my screencasts. Software & Hardware I use Camtasia from Tech Smith, version 7.1.1. Microsoft has a variety of options for capturing the screen to video, but I have been using this software for so long now that I have not invested time to explore alternatives… I also use whatever cheapo headset is near me, but sometimes I get some complaints from some folks about the audio so now I try to remember to use "the good headset". I do not use a web camera as I am not a huge fan of PIP. Preparation First you have to know your technology and demo. Once you think you know it, write down the outline and major steps of the demo. Keep it short 5-20 minutes max. I break that rule sometimes but try not to. The longer the video is the more chances that people will not have the patience to sit through it and the larger the download wmv file ends up being. Run your demo a few times, timing yourself each time to ensure that you have the planned timing correct, but also to make sure that you are comfortable with what you are going to demo. Unlike with a live audience, there is no live reaction/feedback to steer you, so it can be a bit unnerving at first. It can also lead you to babble too much, so try extra hard to be succinct when demoing/screencasting on your own. TIP: Before recording, hide your desktop/taskbar clock if it is showing. Recording To record you start the Camtasia Recorder tool Configure the settings thought the menus Capture menu to choose custom size or full screen. I try to use full screen and remember to lower the resolution of your screen to as low as possible, e.g. 1024x768 or 1360x768 or something like that. From the Tools -> Options dialog you can choose to record audio and the volume level. Effects menu I typically leave untouched but you should explore and experiment to your liking, e.g. how the mouse pointer is captured, and whether there should be a delay for the recording when you start it. Once you've configured these settings, typically you just launch this tool and hit the F9 key to start recording. TIP: As you record, if you ever start to "lose your way" hit F9 again to pause recording, regroup your thoughts and flow, and then hit F9 again to resume. Finally, hit F10 to stop recording. At that point the video starts playing for you in the recorder. This is where you can preview the video to see that you are happy with it before saving. If you are happy, hit the Save As menu to choose where you want to save the video.     TIP: If you've really lost your way to the extent where you'll need to do some editing, hit F10 to stop recording, save the video and then record some more - you'll be able to stitch the videos together later and this will make it easier for you to delete the parts where you messed up. TIP: Before you commit to recording the whole demo, every time you should record 5 seconds and preview them to ensure that you are capturing the screen the way you want to and that your audio is still correctly configured and at the right level. Trust me, you do not want to be recording 15 minutes only to find out that you messed up on the configuration somewhere. Editing To edit the video you launch another Camtasia app, the Camtasia Studio. File->New Project. File->Save Project and choose location. File->Import Media and choose the video(s) you saved earlier. These adds them to the area at the top/middle but not at the timeline at the bottom. Right click on the video and choose Add to timeline. It will prompt you for the Editing dimensions and I always choose Recording Dimensions. Do whatever edits you want to do for this video, then add the next video if you have one to stitch and repeat. In terms of edits there are many options. The simplest is to do nothing, which is the option I did when I first starting doing these in 2006. Nowadays, I typically cut out pieces that I don't like and also lower/mute the audio in other areas and also speed up the video in some areas. A full tutorial on how to do this is beyond the scope of this blog post, but your starting point is to select portions on the timeline and then open the Edit menu at the very top (tip: the context menu doesn't have all options). You can spend hours editing a recording, so don’t lose track of time! When you are done editing, save again, and you are now ready to Produce. Producing Production is specific to where you will publish. I've only ever published on channel9, so for that I do the following File -> Produce and share. This opens a wizard dialog In the dropdown choose Custom production settings Hit Next and then choose WMV Hit Next and keep the default of Camtasia Studio Best Quality and File Size (recommended) Hit Next and choose Editing dimensions video size Hit Next, hit Options and you get a dialog. Enter a Title for the project tab and then on the author tab enter the Creator and Homepage. Hit OK Hit Next. Hit Next again. Enter a video file name in the Production name textbox and then hit Finish. Now do other stuff while you wait for the video to be produced and you hear it playing. After the video is produced watch it to ensure it was produced correctly (e.g. sometimes you get mouse issues) and then you are ready for publishing it. Publishing Follow the instructions of the place where you are going to publish. If you are MSFT internal and want to choose channel9 then contact those folks so they can share their instructions (if you don't know who they are ping me and I'll connect you but they are easy to find in the GAL). For me this involves using a tool to point to the video, choosing a file name (again), choosing an image from the video to display when it is not playing, choosing what output formats I want, and then later on a webpage adding tags, adding a description, and adding a title. That’s all folks, have fun! Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• How I understood monads, part 1/2: sleepless and self-loathing in Seattle

  - by Bertrand Le Roy

  For some time now, I had been noticing some interest for monads, mostly in the form of unintelligible (to me) blog posts and comments saying “oh, yeah, that’s a monad” about random stuff as if it were absolutely obvious and if I didn’t know what they were talking about, I was probably an uneducated idiot, ignorant about the simplest and most fundamental concepts of functional programming. Fair enough, I am pretty much exactly that. Being the kind of guy who can spend eight years in college just to understand a few interesting concepts about the universe, I had to check it out and try to understand monads so that I too can say “oh, yeah, that’s a monad”. Man, was I hit hard in the face with the limitations of my own abstract thinking abilities. All the articles I could find about the subject seemed to be vaguely understandable at first but very quickly overloaded the very few concept slots I have available in my brain. They also seemed to be consistently using arcane notation that I was entirely unfamiliar with. It finally all clicked together one Friday afternoon during the team’s beer symposium when Louis was patient enough to break it down for me in a language I could understand (C#). I don’t know if being intoxicated helped. Feel free to read this with or without a drink in hand. So here it is in a nutshell: a monad allows you to manipulate stuff in interesting ways. Oh, OK, you might say. Yeah. Exactly. Let’s start with a trivial case: public static class Trivial { public static TResult Execute<T, TResult>( this T argument, Func<T, TResult> operation) { return operation(argument); } } This is not a monad. I removed most concepts here to start with something very simple. There is only one concept here: the idea of executing an operation on an object. This is of course trivial and it would actually be simpler to just apply that operation directly on the object. But please bear with me, this is our first baby step. Here’s how you use that thing: "some string" .Execute(s => s + " processed by trivial proto-monad.") .Execute(s => s + " And it's chainable!"); What we’re doing here is analogous to having an assembly chain in a factory: you can feed it raw material (the string here) and a number of machines that each implement a step in the manufacturing process and you can start building stuff. The Trivial class here represents the empty assembly chain, the conveyor belt if you will, but it doesn’t care what kind of raw material gets in, what gets out or what each machine is doing. It is pure process. A real monad will need a couple of additional concepts. Let’s say the conveyor belt needs the material to be processed to be contained in standardized boxes, just so that it can safely and efficiently be transported from machine to machine or so that tracking information can be attached to it. Each machine knows how to treat raw material or partly processed material, but it doesn’t know how to treat the boxes so the conveyor belt will have to extract the material from the box before feeding it into each machine, and it will have to box it back afterwards. This conveyor belt with boxes is essentially what a monad is. It has one method to box stuff, one to extract stuff from its box and one to feed stuff into a machine. So let’s reformulate the previous example but this time with the boxes, which will do nothing for the moment except containing stuff. public class Identity<T> { public Identity(T value) { Value = value; } public T Value { get; private set;} public static Identity<T> Unit(T value) { return new Identity<T>(value); } public static Identity<U> Bind<U>( Identity<T> argument, Func<T, Identity<U>> operation) { return operation(argument.Value); } } Now this is a true to the definition Monad, including the weird naming of the methods. It is the simplest monad, called the identity monad and of course it does nothing useful. Here’s how you use it: Identity<string>.Bind( Identity<string>.Unit("some string"), s => Identity<string>.Unit( s + " was processed by identity monad.")).Value That of course is seriously ugly. Note that the operation is responsible for re-boxing its result. That is a part of strict monads that I don’t quite get and I’ll take the liberty to lift that strange constraint in the next examples. To make this more readable and easier to use, let’s build a few extension methods: public static class IdentityExtensions { public static Identity<T> ToIdentity<T>(this T value) { return new Identity<T>(value); } public static Identity<U> Bind<T, U>( this Identity<T> argument, Func<T, U> operation) { return operation(argument.Value).ToIdentity(); } } With those, we can rewrite our code as follows: "some string".ToIdentity() .Bind(s => s + " was processed by monad extensions.") .Bind(s => s + " And it's chainable...") .Value; This is considerably simpler but still retains the qualities of a monad. But it is still pointless. Let’s look at a more useful example, the state monad, which is basically a monad where the boxes have a label. It’s useful to perform operations on arbitrary objects that have been enriched with an attached state object. public class Stateful<TValue, TState> { public Stateful(TValue value, TState state) { Value = value; State = state; } public TValue Value { get; private set; } public TState State { get; set; } } public static class StateExtensions { public static Stateful<TValue, TState> ToStateful<TValue, TState>( this TValue value, TState state) { return new Stateful<TValue, TState>(value, state); } public static Stateful<TResult, TState> Execute<TValue, TState, TResult>( this Stateful<TValue, TState> argument, Func<TValue, TResult> operation) { return operation(argument.Value) .ToStateful(argument.State); } } You can get a stateful version of any object by calling the ToStateful extension method, passing the state object in. You can then execute ordinary operations on the values while retaining the state: var statefulInt = 3.ToStateful("This is the state"); var processedStatefulInt = statefulInt .Execute(i => ++i) .Execute(i => i * 10) .Execute(i => i + 2); Console.WriteLine("Value: {0}; state: {1}", processedStatefulInt.Value, processedStatefulInt.State); This monad differs from the identity by enriching the boxes. There is another way to give value to the monad, which is to enrich the processing. An example of that is the writer monad, which can be typically used to log the operations that are being performed by the monad. Of course, the richest monads enrich both the boxes and the processing. That’s all for today. I hope with this you won’t have to go through the same process that I did to understand monads and that you haven’t gone into concept overload like I did. Next time, we’ll examine some examples that you already know but we will shine the monadic light, hopefully illuminating them in a whole new way. Realizing that this pattern is actually in many places but mostly unnoticed is what will enable the truly casual “oh, yes, that’s a monad” comments. Here’s the code for this article: http://weblogs.asp.net/blogs/bleroy/Samples/Monads.zip The Wikipedia article on monads: http://en.wikipedia.org/wiki/Monads_in_functional_programming This article was invaluable for me in understanding how to express the canonical monads in C# (interesting Linq stuff in there): http://blogs.msdn.com/b/wesdyer/archive/2008/01/11/the-marvels-of-monads.aspx

  Read the article

• CodePlex Daily Summary for Sunday, December 12, 2010

  CodePlex Daily Summary for Sunday, December 12, 2010Popular ReleasesWii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...WPF Multiple Document Interface (MDI): Beta Release v1.1: WPF.MDI is a library to imitate the traditional Windows Forms Multiple Document Interface (MDI) features in WPF. This is Beta release, means there's still work to do. Please provide feedback, so next release will be better. Features: Position dependency property MdiLayout dependency property Menu dependency property Ctrl + F4, Ctrl + Tab shortcuts should work Behavior: don’t allow negative values for MdiChild position minimized windows: remember position, tile multiple windows, ...EnhSim: EnhSim 2.2.1 ALPHA: 2.2.1 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated th...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.DNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration value .NET Version: 3.5 sp1My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).SharePoint Packager: SharePoint Packager release: Full source code and precompiled / ILmerged exeTweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingNew ProjectsABR Manager: Fast and small Adobe brushes preset files manager developed in native c++.Aplicativo lembretes: Com esse aplicativo você poderá agentar atividades de forma que quando o dia e a hora do compromisso marcado chegar, o aplicativo ira lembra-lo com um sinal sonoro e visual e até poderá desligar seu pc. O programa ficará em execução de forma discreta no canto direito superiorBrogue: Grevious Sword of Carnage: * 24 damage * makes annoying sound on hitsC# LZF Real-Time Compression Algorithm: Improved C# LZF Compressor, a very small and extremely efficient real-time data compression library. The compression algorithm is extremely fast. Well suited for real-time data intensive applications (e.g.: packet streaming, embedded devices...).GIFT: gift appHeroBeastCodeProject: create a HeroBeastCodeProjects project,opensource my codeiFinance: The wpf/sl solution for personal finance manager.MailOnSocketChange: Send an alert via email, if a certain socket/TCP-connection-changes state on the PC running the MailOnSocketChange applicationMath Teacher for kids: This application will help your kids learn and practice Math. midnc: Proyecto en silverlight para el control interno de registro de actividades y eventosMusicWho: MusicWho compose music. It use biological neuron firing signals to generate music. so, what will the brain sound like? we'll see.Nabaztag Enterprise Services: The goal of the Nabaztag Enterprise Services is to come up with a free .NET implementation of the Nabaztag server. Additionally we think of building a whole platform around the core services using the newsest an coolest .NET technologies.pkEditor: pkEditor is a Poketscript or Pokescript script generator and editor.Second Block: Second Block is an block-based 3D multiplayer game.Share my speed: Coding4Fun Window Phone 7 "Share my speed" applicationSharePoint Image Resizer: Image Resizer allows to create custom policies to control image size of pictures in WSS 3.0/SharePoint 2007.ShoutStreamSource: ShoutStreamSource provides you an implementation of the MediaStreamSource of the ShoutCast protocol for the Windows Phone 7. It makes it possible to play a ShoutCast stream using a MediaElement on the phone.SSIS Reporting Pack: A suite of SQL Server Reporting Services reports that operate over the SSIS catalog in SQL Server code-named DenaliSunshine2011: testTrabalhando com Functoid Table Looping: Usado em conjunto com o Functoid “Table Extractor”, serve para criar estruturas de any registros podendo conter valores de campos, valores constantes, e valores que resultam de outros functoids. VKontakte API SDK: SDK for work with most popular russian social site VKontakte.ruwho's who: iYasmin: Yasmin - A WPF based Anime Database.YiDeSOFT: YiDe is EzDesk~!?????????? ?????: ?????????? ????? ?????????? ? ?????????????? ????????? ??????? ?????????????????? ? ????????? ???????

  Read the article

• Guest Post: Using IronRuby and .NET to produce the &lsquo;Hello World of WPF&rsquo;

  - by Eric Nelson

  [You might want to also read other GuestPosts on my blog – or contribute one?] On the 26th and 27th of March (2010) myself and Edd Morgan of Microsoft will be popping along to the Scottish Ruby Conference. I dabble with Ruby and I am a huge fan whilst Edd is a “proper Ruby developer”. Hence I asked Edd if he was interested in creating a guest post or two for my blog on IronRuby. This is the second of those posts. If you should stumble across this post and happen to be attending the Scottish Ruby Conference, then please do keep a look out for myself and Edd. We would both love to chat about all things Ruby and IronRuby. And… we should have (if Amazon is kind) a few books on IronRuby with us at the conference which will need to find a good home. This is me and Edd and … the book: Order on Amazon: http://bit.ly/ironrubyunleashed Using IronRuby and .NET to produce the ‘Hello World of WPF’ In my previous post I introduced, to a minor extent, IronRuby. I expanded a little on the basics of by getting a Rails app up-and-running on this .NET implementation of the Ruby language — but there wasn't much to it! So now I would like to go from simply running a pre-existing project under IronRuby to developing a whole new application demonstrating the seamless interoperability between IronRuby and .NET. In particular, we'll be using WPF (Windows Presentation Foundation) — the component of the .NET Framework stack used to create rich media and graphical interfaces. Foundations of WPF To reiterate, WPF is the engine in the .NET Framework responsible for rendering rich user interfaces and other media. It's not the only collection of libraries in the framework with the power to do this — Windows Forms does the trick, too — but it is the most powerful and flexible. Put simply, WPF really excels when you need to employ eye candy. It's all about creating impact. Whether you're presenting a document, video, a data entry form, some kind of data visualisation (which I am most hopeful for, especially in terms of IronRuby - more on that later) or chaining all of the above with some flashy animations, you're likely to find that WPF gives you the most power when developing any of these for a Windows target. Let's demonstrate this with an example. I give you what I like to consider the 'hello, world' of WPF applications: the analogue clock. Today, over my lunch break, I created a WPF-based analogue clock using IronRuby... Any normal person would have just looked at their watch. - Twitter The Sample Application: Click here to see this sample in full on GitHub. Using Windows Presentation Foundation from IronRuby to create a Clock class Invoking the Clock class   Gives you The above is by no means perfect (it was a lunch break), but I think it does the job of illustrating IronRuby's interoperability with WPF using a familiar data visualisation. I'm sure you'll want to dissect the code yourself, but allow me to step through the important bits. (By the way, feel free to run this through ir first to see what actually happens). Now we're using IronRuby - unlike my previous post where we took pure Ruby code and ran it through ir, the IronRuby interpreter, to demonstrate compatibility. The main thing of note is the very distinct parallels between .NET namespaces and Ruby modules, .NET classes and Ruby classes. I guess there's not much to say about it other than at this point, you may as well be working with a purely Ruby graphics-drawing library. You're instantiating .NET objects, but you're doing it with the standard Ruby .new method you know from Ruby as Object#new — although, the root object of all your IronRuby objects isn't actually Object, it's System.Object. You're calling methods on these objects (and classes, for example in the call to System.Windows.Controls.Canvas.SetZIndex()) using the underscored, lowercase convention established for the Ruby language. The integration is so seamless. The fact that you're using a dynamic language on top of .NET's CLR is completely abstracted from you, allowing you to just build your software. A Brief Note on Events Events are a big part of developing client applications in .NET as well as under every other environment I can think of. In case you aren't aware, event-driven programming is essentially the practice of telling your code to call a particular method, or other chunk of code (a delegate) when something happens at an unpredictable time. You can never predict when a user is going to click a button, move their mouse or perform any other kind of input, so the advent of the GUI is what necessitated event-driven programming. This is where one of my favourite aspects of the Ruby language, blocks, can really help us. In traditional C#, for instance, you may subscribe to an event (assign a block of code to execute when an event occurs) in one of two ways: by passing a reference to a named method, or by providing an anonymous code block. You'd be right for seeing the parallel here with Ruby's concept of blocks, Procs and lambdas. As demonstrated at the very end of this rather basic script, we are using .NET's System.Timers.Timer to (attempt to) update the clock every second (I know it's probably not the best way of doing this, but for example's sake). Note: Diverting a little from what I said above, the ticking of a clock is very predictable, yet we still use the event our Timer throws to do this updating as one of many ways to perform that task outside of the main thread. You'll see that all that's needed to assign a block of code to be triggered on an event is to provide that block to the method of the name of the event as it is known to the CLR. This drawback to this is that it only allows the delegation of one code block to each event. You may use the add method to subscribe multiple handlers to that event - pushing that to the end of a queue. Like so: def tick puts "tick tock" end timer.elapsed.add method(:tick) timer.elapsed.add proc { puts "tick tock" } tick_handler = lambda { puts "tick tock" } timer.elapsed.add(tick_handler)   The ability to just provide a block of code as an event handler helps IronRuby towards that very important term I keep throwing around; low ceremony. Anonymous methods are, of course, available in other more conventional .NET languages such as C# and VB but, as usual, feel ever so much more elegant and natural in IronRuby. Note: Whether it's a named method or an anonymous chunk o' code, the block you delegate to the handling of an event can take arguments - commonly, a sender object and some args. Another Brief Note on Verbosity Personally, I don't mind verbose chaining of references in my code as long as it doesn't interfere with performance - as evidenced in the example above. While I love clean code, there's a certain feeling of safety that comes with the terse explicitness of long-winded addressing and the describing of objects as opposed to ambiguity (not unlike this sentence). However, when working with IronRuby, even I grow tired of typing System::Whatever::Something. Some people enjoy simply assuming namespaces and forgetting about them, regardless of the language they're using. Don't worry, IronRuby has you covered. It is completely possible to, with a call to include, bring the contents of a .NET-converted module into context of your IronRuby code - just as you would if you wanted to bring in an 'organic' Ruby module. To refactor the style of the above example, I could place the following at the top of my Clock class: class Clock include System::Windows::Shape include System::Windows::Media include System::Windows::Threading # and so on...   And by doing so, reduce calls to System::Windows::Shapes::Ellipse.new to simply Ellipse.new or references to System::Windows::Threading::DispatcherPriority.Render to a friendlier DispatcherPriority.Render. Conclusion I hope by now you can understand better how IronRuby interoperates with .NET and how you can harness the power of the .NET framework with the dynamic nature and elegant idioms of the Ruby language. The manner and parlance of Ruby that makes it a joy to work with sets of data is, of course, present in IronRuby — couple that with WPF's capability to produce great graphics quickly and easily, and I hope you can visualise the possibilities of data visualisation using these two things. Using IronRuby and WPF together to create visual representations of data and infographics is very exciting to me. Although today, with this project, we're only presenting one simple piece of information - the time - the potential is much grander. My day-to-day job is centred around software development and UI design, specifically in the realm of healthcare, and if you were to pay a visit to our office you would behold, directly above my desk, a large plasma TV with a constantly rotating, animated slideshow of charts and infographics to help members of our team do their jobs. It's an app powered by WPF which never fails to spark some conversation with visitors whose gaze has been hooked. If only it was written in IronRuby, the pleasantly low ceremony and reduced pre-processing time for my brain would have helped greatly. Edd Morgan blog Related Links: Getting PhP and Ruby working on Windows Azure and SQL Azure

  Read the article

• CodePlex Daily Summary for Tuesday, May 29, 2012

  CodePlex Daily Summary for Tuesday, May 29, 2012Popular ReleasesDotNetNuke Azure Accelerator: DotNetNuke Azure Accelerator 6.2: Windows Azure deployments of DotNetNuke Community using virtual hard drive (cloud-drive) image that is created dynamically on the cloud. Enables the creation of new DotNetNuke host instances from on-premise to the cloud using a wizard that guides you on this process, creating the SQL Azure database, uploading the solution engine and associated service configurations. New features in this releaseModified the web roles endpoints to allow traffic on port 443 Changed the package unzip operati...Thales Simulator Library: Version 0.9.6: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptographic device. This release fixes a problem with the FK command and a bug in the implementation of PIN block 05 format deconstruction. A new 0.9.6.Binaries file has been posted. This includes executable programs without an installer, including the GUI and console simulators, the key manager and the PVV clashing demo. Please note that you will need ...myManga: myManga v1.0.0.2: Fixed the 'Lost+Brain' error on MangaReader. The main download has this update. The second download is for those who have already downloaded the old v1.0.0.2. DELETE OLD EXE and DLLs before you copy the new files over.To update from v1.0.0.1:Extract new myManga EXE and DLLs from Zip to folder of choosing. Copy MangaInfo and MangaArchives folder from old myManga folder to new folder from step 1. ORDelete: The new myManga.exe contains the CoreMangaClasses.dll and Manga.dll internally. Delet...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...Indent Guides for Visual Studio: Indent Guides v12: Version History Changed in v12: background document analysis new options dialog with Quick Set selections for behavior new "glow" style for guides new menu icon in VS 11 preview control now uses editor theming highlighting can be customised on each line fixed issues with collapsed code blocks improved behaviour around left-aligned pragma/preprocessor commands (C#/C++) new settings for controlling guides in empty lines restructured settings storage (should be more reliable) ...callisto: callisto 2.0.29: Added DNS functionality to scripting. See documentation section for details of how to incorporate this into your scripts.ZXMAK2: Version 2.6.2.2: - implemented read port #7FFD glitch for ULA128 (fusetest) - fix unhandled exception inside open dialog - fix Z80 format serializer (support 55 bytes header & non compressed 128 blocks - thanks to Ralf) This release include SPRINTER emulation, but boot system disk image was removed.Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...ScreenShot: InstallScreenShot: This is the current stable release.????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ????SDK for .Net 4.X???????PHP?SDK???OAuth??API???Client???。 ??????API?? ???????OAuth2.0???? ???：????????，DEMO??AppKey????????????????，?????AppKey，????AppKey???????????，?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitExpression Tree Visualizer for VS 2010: Expression Tree Visualizer Beta: This is a beta release, in this release some expression types are not handled and use a default visualization behavior. The first release will be published soon. Wait for it...Ulfi: Ulfi source: Build with Visual Studio 2010 Express C# or betterJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...Christoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.New ProjectsActive Log Reader: The active log reader provides the ability for a client to subscribe to specific changes in a set of files in a directory. For example, it allows you to actively monitor all .log files in your C:\Windows directory (and sub-directories) and callback whenever the word "ERROR" shows up (or any regular expression you can come up with). The accompanying test project outlines example usage.ADO.NET light wrapper: ADO.NET light wrapper is thin IEnumerable layer about ADO.NET for provide easy way to access data with strong typing support. Allen Neighborhood Center: Allen Neighborhood Center data interactionsCildads: The first attempt at centryCMT: Course Management Tool ProjectCode Builder: this is the Builder project.Connect: this is the Connect project.Craig's Framework: A basic framework that is used to speed up building MVC applications and make certain things simpler.CRM 2011 Fetch XML Execute Tool: This is a dev tool used to execute fetch xml to get the results from the connected CRM 2011 instanceDallasDB: A struct based database. DallasDB will have no full functionality until at least version 0.0.1, and won't be ready for professional use until version 1.0.0. EasyMvc: It provides a trainning sample to develop a web application base on MVC3 EF4.0 SQL Compact 4. Besides, a common business permission, logging, configration have been applied simply. Share with some implement idea about web, mvc, jquery,orm. Appreciate your advice.Entity: this is the Entity project.FogLampz: FogLampz is a .NET wrapper around around the FogBugz API.Geeba: Geeba Forum for Students in BGU UniversityHibernate: this is the Hibernate project.JSense - IntelliSense for JavaScript: JSense provides JavaScript IntelliSense meta-automation for Visual Studio 2010 projectsMichael: this is Michael's project.ModAdder: Minecraft Mod InstallerMVVM ORM: The purpose of MVVM ORM is to create models and their interactions as defined in some database for WPF applications Models are derived from tables, views and stored procedures. Interactions include insert/update/delete, with FK relationships taken into account. nihao: The summary is required.Report: this is the Report project.REST Start Kit for BizTalk: This project enables BizTalk Server to expose RESTFul services through the WCF-Custom adapter. The library supports both receive and send, both XML and JSON with all HTTP verbs (GET, POST, PUT and DELETE). The solution is based on two custom WCF behaviors, one to be used on Receive Locations and one on Send Ports. Hopeully you'll find them easy to use, but if you have any issues, please use the discussions forum.RovignetaWinPhone7: bla bla blaScreenShot: A simple utility that enhances the experience of taking screenshots and annotating them. And all of it happens with the screenshot key that you are most used to. PrintScreen. Give it a try. You will forget the traditional tedious screenshot mechanism.SDM Exam 2012: This is an exam project for 4th semester.Struts: this is the Struts project.TheStoreDepot: depot for the StoreTibiaBot: TibiaBot is an open source application dedicated to extend your gaming experience in MMORPG game called Tibia. Besides of very many built-in functions, TibiaBot has implemented IronRuby script engine, which allows You to creating new functionality to base program.TopicInterDisciplinary: Topic inter-disciplinary owner: sherry, chen1984yangWebAppMatrix: ??WebApp??，?????！

  Read the article

• Entity Framework and multi-tenancy database design

  - by Junto

  I am looking at multi-tenancy database schema design for an SaaS concept. It will be ASP.NET MVC - EF, but that isn't so important. Below you can see an example database schema (the Tenant being the Company). The CompanyId is replicated throughout the schema and the primary key has been placed on both the natural key, plus the tenant Id. Plugging this schema into the Entity Framework gives the following errors when I add the tables into the Entity Model file (Model1.edmx): The relationship 'FK_Order_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderId, CompanyId}' of the table 'Order'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Order' uses the set of foreign keys '{OrderId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_Order_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderId, CompanyId}' of the table 'Order'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Customer' uses the set of foreign keys '{CustomerId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Order' uses the set of foreign keys '{OrderId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The relationship 'FK_OrderLine_Product' uses the set of foreign keys '{ProductId, CompanyId}' that are partially contained in the set of primary keys '{OrderLineId, CompanyId}' of the table 'OrderLine'. The set of foreign keys must be fully contained in the set of primary keys, or fully not contained in the set of primary keys to be mapped to a model. The question is in two parts: Is my database design incorrect? Should I refrain from these compound primary keys? I'm questioning my sanity regarding the fundamental schema design (frazzled brain syndrome). Please feel free to suggest the 'idealized' schema. Alternatively, if the database design is correct, then is EF unable to match the keys because it perceives these foreign keys as a potential mis-configured 1:1 relationships (incorrectly)? In which case, is this an EF bug and how can I work around it?

  Read the article

• Streaming a webcam from Silverlight 4 (Beta)

  - by Ken Smith

  The new webcam stuff in Silverlight 4 is darned cool. By exposing it as a brush, it allows scenarios that are way beyond anything that Flash has. At the same time, accessing the webcam locally seems like it's only half the story. Nobody buys a webcam so they can take pictures of themselves and make funny faces out of them. They buy a webcam because they want other people to see the resulting video stream, i.e., they want to stream that video out to the Internet, a lay Skype or any of the dozens of other video chat sites/applications. And so far, I haven't figured out how to do that with It turns out that it's pretty simple to get a hold of the raw (Format32bppArgb formatted) bytestream, as demonstrated here. But unless we want to transmit that raw bytestream to a server (which would chew up way too much bandwidth), we need to encode that in some fashion. And that's more complicated. MS has implemented several codecs in Silverlight, but so far as I can tell, they're all focused on decoding a video stream, not encoding it in the first place. And that's apart from the fact that I can't figure out how to get direct access to, say, the H.264 codec in the first place. There are a ton of open-source codecs (for instance, in the ffmpeg project here), but they're all written in C, and they don't look easy to port to C#. Unless translating 10000+ lines of code that look like this is your idea of fun :-) const int b_xy= h->mb2b_xy[left_xy[i]] + 3; const int b8_xy= h->mb2b8_xy[left_xy[i]] + 1; *(uint32_t*)h->mv_cache[list][cache_idx ]= *(uint32_t*)s->current_picture.motion_val[list][b_xy + h->b_stride*left_block[0+i*2]]; *(uint32_t*)h->mv_cache[list][cache_idx+8]= *(uint32_t*)s->current_picture.motion_val[list][b_xy + h->b_stride*left_block[1+i*2]]; h->ref_cache[list][cache_idx ]= s->current_picture.ref_index[list][b8_xy + h->b8_stride*(left_block[0+i*2]>>1)]; h->ref_cache[list][cache_idx+8]= s->current_picture.ref_index[list][b8_xy + h->b8_stride*(left_block[1+i*2]>>1)]; The mooncodecs folder within the Mono project (here) has several audio codecs in C# (ADPCM and Ogg Vorbis), and one video codec (Dirac), but they all seem to implement just the decode portion of their respective formats, as do the java implementations from which they were ported. I found a C# codec for Ogg Theora (csTheora, http://www.wreckedgames.com/forum/index.php?topic=1053.0), but again, it's decode only, as is the jheora codec on which it's based. Of course, it would presumably be easier to port a codec from Java than from C or C++, but the only java video codecs that I found were decode-only (such as jheora, or jirac). So I'm kinda back at square one. It looks like our options for hooking up a webcam (or microphone) through Silverlight to the Internet are: (1) Wait for Microsoft to provide some guidance on this; (2) Spend the brain cycles porting one of the C or C++ codecs over to Silverlight-compatible C#; (3) Send the raw, uncompressed bytestream up to a server (or perhaps compressed slightly with something like zlib), and then encode it server-side; or (4) Wait for someone smarter than me to figure this out and provide a solution. Does anybody else have any better guidance? Have I missed something that's just blindingly obvious to everyone else? (For instance, does Silverlight 4 somewhere have some classes I've missed that take care of this?)

  Read the article

• Using DateTime in a SqlParameter for Stored Procedure, format error

  - by Matt

  I'm trying to call a stored procedure (on a SQL 2005 server) from C#, .NET 2.0 using DateTime as a value to a SqlParameter. The SQL type in the stored procedure is 'datetime'. Executing the sproc from SQL Management Studio works fine. But everytime I call it from C# I get an error about the date format. When I run SQL Profiler to watch the calls, I then copy paste the exec call to see whats going on. These are my observations and notes about what I've attempted: 1) If I pass the DateTime in directly as a DateTime or converted to SqlDateTime, the field is surrounding by a PAIR of single quotes, such as @Date_Of_Birth=N''1/8/2009 8:06:17 PM'' 2) If I pass the DateTime in as a string, I only get the single quotes 3) Using SqlDateTime.ToSqlString() does not result in a UTC formatted datetime string (even after converting to universal time) 4) Using DateTime.ToString() does not result in a UTC formatted datetime string. 5) Manually setting the DbType for the SqlParameter to DateTime does not change the above observations. So, my questions then, is how on earth do I get C# to pass the properly formatted time in the SqlParameter? Surely this is a common use case, why is it so difficult to get working? I can't seem to convert DateTime to a string that is SQL compatable (e.g. '2009-01-08T08:22:45') EDIT RE: BFree, the code to actually execute the sproc is as follows: using (SqlCommand sprocCommand = new SqlCommand(sprocName)) { sprocCommand.Connection = transaction.Connection; sprocCommand.Transaction = transaction; sprocCommand.CommandType = System.Data.CommandType.StoredProcedure; sprocCommand.Parameters.AddRange(parameters.ToArray()); sprocCommand.ExecuteNonQuery(); } To go into more detail about what I have tried: parameters.Add(new SqlParameter("@Date_Of_Birth", DOB)); parameters.Add(new SqlParameter("@Date_Of_Birth", DOB.ToUniversalTime())); parameters.Add(new SqlParameter("@Date_Of_Birth", DOB.ToUniversalTime().ToString())); SqlParameter param = new SqlParameter("@Date_Of_Birth", System.Data.SqlDbType.DateTime); param.Value = DOB.ToUniversalTime(); parameters.Add(param); SqlParameter param = new SqlParameter("@Date_Of_Birth", SqlDbType.DateTime); param.Value = new SqlDateTime(DOB.ToUniversalTime()); parameters.Add(param); parameters.Add(new SqlParameter("@Date_Of_Birth", new SqlDateTime(DOB.ToUniversalTime()).ToSqlString())); Additional EDIT The one I thought most likely to work: SqlParameter param = new SqlParameter("@Date_Of_Birth", System.Data.SqlDbType.DateTime); param.Value = DOB; Results in this value in the exec call as seen in the SQL Profiler @Date_Of_Birth=''2009-01-08 15:08:21:813'' If I modify this to be @Date_Of_Birth='2009-01-08T15:08:21' It works, but it won't parse with pair of single quotes, and it wont convert to a datetime correctly with the space between the date and time and with the milliseconds on the end. Update and Success First and foremost, thank you everyone for the answers. I post this for the sake of completeness and accuracy on SO - because I certainly do not do it for my pride... I had copy/pasted the code above after the request from below. I trimmed things here and there to be concise. Turns out my problem was in the code I left out, which I'm sure any one of you would have spotted in an instant. I had wrapped my sproc calls inside a transaction. Turns out that I was simply not doing transaction.Commit()!!!!! I'm ashamed to say it, but there you have it. I still don't know what's going on with the syntax I get back from the profiler. A coworker watched with his own instance of the profiler from his computer, and it returned proper syntax. Watching the very SAME executions from my profiler showed the incorrect syntax. It acted as a red-herring, making me believe there was a query syntax problem instead of the much more simple and true answer, which was that I need to commit the transaction! I marked an answer below as correct, and threw in some up-votes on others because they did, after all, answer the question, even if they didn't fix my specific (brain lapse) issue. Thanks again for the help.

  Read the article

• building median for each string in IList<IDictionary<string, double>>

  - by Oliver

  Actually i have a little brain bender and and just can't find the right direction to get it to work: Given is an IList<IDictionary<string, double>> and it is filled as followed: Name|Value ----+----- "x" | 3.8 "y" | 4.2 "z" | 1.5 ----+----- "x" | 7.2 "y" | 2.9 "z" | 1.3 ----+----- ... | ... To fill this up with some random data i used the following methods: var list = CreateRandomPoints(new string[] { "x", "y", "z" }, 20); This will work as followed: private IList<IDictionary<string, double>> CreateRandomPoints(string[] variableNames, int count) { var list = new List<IDictionary<string, double>>(count); list.AddRange(CreateRandomPoints(variableNames).Take(count)); return list; } private IEnumerable<IDictionary<string, double>> CreateRandomPoints(string[] variableNames) { while (true) yield return CreateRandomLine(variableNames); } private IDictionary<string, double> CreateRandomLine(string[] variableNames) { var dict = new Dictionary<string, double>(variableNames.Length); foreach (var variable in variableNames) { dict.Add(variable, _Rand.NextDouble() * 10); } return dict; } Also i can say that it is already ensured that every Dictionary within the list contains the same keys (but from list to list the names and count of the keys can change). So that's what i got. Now to the things i need: I'd like to get the median (or any other math aggregate operation) of each Key within all the dictionaries, so that my function to call would look something like: IDictionary<string, double> GetMedianOfRows(this IList<IDictionary<string, double>> list) The best would be to give some kind of aggregate operation as a parameter to the function to make it more generic (don't know if the func has the correct parameters, but should imagine what i'd like to do): private IDictionary<string, double> Aggregate(this IList<IDictionary<string, double>> list, Func<IEnumerable<double>, double> aggregator) Also my actual biggest problem is to do the job with a single iteration over the list, cause if within the list are 20 variables with 1000 values i don't like to iterate 20 times over the list. Instead i would go one time over the list and compute all twenty variables at once (The biggest advantage of doing it that way would be to use this also as IEnumerable<T> on any part of the list in a later step). So here is the code i already got: public static IDictionary<string, double> GetMedianOfRows(this IList<IDictionary<string, double>> list) { //Check of parameters is left out! //Get first item for initialization of result dictionary var firstItem = list[0]; //Create result dictionary and fill in variable names var dict = new Dictionary<string, double>(firstItem.Count); //Iterate over the whole list foreach (IDictionary<string, double> row in list) { //Iterate over each key/value pair within the list foreach (var kvp in row) { //How to determine median of all values? } } return dict; } Just to be sure here is a little explanation about the Median.

  Read the article

• How to Access a descendant object's internal method in C#

  - by Giovanni Galbo

  I'm trying to access a method that is marked as internal in the parent class (in its own assembly) in an object that inherits from the same parent. Let me explain what I'm trying to do... I want to create Service classes that return IEnumberable with an underlying List to non-Service classes (e.g. the UI) and optionally return an IEnumerable with an underlying IQueryable to other services. I wrote some sample code to demonstrate what I'm trying to accomplish, shown below. The example is not real life, so please remember that when commenting. All services would inherit from something like this (only relevant code shown): public class ServiceBase<T> { protected readonly ObjectContext _context; protected string _setName = String.Empty; public ServiceBase(ObjectContext context) { _context = context; } public IEnumerable<T> GetAll() { return GetAll(false); } //These are not the correct access modifiers.. I want something //that is accessible to children classes AND between descendant classes internal protected IEnumerable<T> GetAll(bool returnQueryable) { var query = _context.CreateQuery<T>(GetSetName()); if(returnQueryable) { return query; } else { return query.ToList(); } } private string GetSetName() { //Some code... return _setName; } } Inherited services would look like this: public class EmployeeService : ServiceBase<Employees> { public EmployeeService(ObjectContext context) : base(context) { } } public class DepartmentService : ServiceBase<Departments> { private readonly EmployeeService _employeeService; public DepartmentService(ObjectContext context, EmployeeService employeeService) : base(context) { _employeeService = employeeService; } public IList<Departments> DoSomethingWithEmployees(string lastName) { //won't work because method with this signature is not visible to this class var emps = _employeeService.GetAll(true); //more code... } } Because the parent class lives is reusable, it would live in a different assembly than the child services. With GetAll(bool returnQueryable) being marked internal, the children would not be able to see each other's GetAll(bool) method, just the public GetAll() method. I know that I can add a new internal GetAll method to each service (or perhaps an intermediary parent class within the same assembly) so that each child service within the assembly can see each other's method; but it seems unnecessary since the functionality is already available in the parent class. For example: internal IEnumerable<Employees> GetAll(bool returnIQueryable) { return base.GetAll(returnIQueryable); } Essentially what I want is for services to be able to access other service methods as IQueryable so that they can further refine the uncommitted results, while everyone else gets plain old lists. Any ideas? EDIT You know what, I had some fun playing a little code golf with this... but ultimately I wouldn't be able to use this scheme anyway because I pass interfaces around, not classes. So in my example GetAll(bool returnIQueryable) would not be in the interface, meaning I'd have to do casting, which goes against what I'm trying to accomplish. I'm not sure if I had a brain fart or if I was just too excited trying to get something that I thought was neat to work. Either way, thanks for the responses.

  Read the article

• How do I get a Java to call data from the Internet? Where to even start??

  - by cdg

  Hello oh great wizards of all things android. I really need your help. Mostly because my little brain just doesn't know were to start. I am trying to pull data from the internet to make a widget for the home screen. I have the layout built: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/Layout" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="@drawable/widget_bg_normal" android:clipChildren="false" > <TextView android:id="@+id/text_view" android:layout_width="100px" android:layout_height="wrap_content" android:paddingTop="18px" android:layout_centerHorizontal="true" android:textSize="8px" android:text="158x154 Image downloaded from the internet goes here. Needs to be updated every evening at midnight or unless the button below is pressed. Now if I could only figure out exactly how to do this, life would be good." /> <Button android:id="@+id/new_button" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="Get New" android:layout_below="@+id/scroll_image" android:layout_centerHorizontal="true" android:padding="0px" android:textSize="10px" android:height="8px" android:includeFontPadding="false" /> </RelativeLayout> Got the provider xml bulit: <?xml version="1.0" encoding="utf-8"?> <appwidget-provider xmlns:android="http://schemas.android.com/apk/res/android" android:minWidth="150dip" android:minHeight="150dip" android:updatePeriodMillis="10000" android:initialLayout="@layout/widget" /> The Manifest works great. <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.dge.myandroid" android:versionCode="1" android:versionName="1.0"> <application android:icon="@drawable/icon" android:label="@string/app_name"> <activity android:name=".myactivty" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <!-- Widget --> <receiver android:name=".mywidget" android:label="@string/app_name" > <intent-filter> <action android:name="android.appwidget.action.APPWIDGET_UPDATE" /> </intent-filter> <meta-data android:name="android.appwidget.widgetprovider" android:resource="@xml/widgetprovider" /> </receiver> <!-- Widget End --> </application> <uses-permission android:name="android.permission.INTERNET" /> <uses-sdk android:minSdkVersion="7" /> </manifest> The data it is calling looks something like this when it is called. It basically goes to a website that uses php to random the image: <html><body bgcolor="#000000">center> <a href="http://www.website.com" target="_blank"> <img border="0" src="http://www.webiste.com//0.gif"></a> <img src="http://www.webiste.com" style="border:none;" /> </center></body></html> But here is were I am stuck. I just don't know where to start at all. The java is so far beyond my little head that I don't know what to do. package com.dge.myandroid; import android.appwidget.AppWidgetProvider; public class mywidget extends AppWidgetProvider { } The wiki example just confused me more. I just don't know where to begin. Please help.

  Read the article

• TripleDES in Perl/PHP/ColdFusion

  - by Seidr

  Recently a problem arose regarding hooking up an API with a payment processor who were requesting a string to be encrypted to be used as a token, using the TripleDES standard. Our Applications run using ColdFusion, which has an Encrypt tag - that supports TripleDES - however the result we were getting back was not what the payment processor expected. First of all, here is the resulting token the payment processor were expecting. AYOF+kRtg239Mnyc8QIarw== And below is the snippet of ColdFusion we were using, and the resulting string. <!--- Coldfusion Crypt (here be monsters) ---> <cfset theKey="123412341234123412341234"> <cfset theString = "username=test123"> <cfset strEncodedEnc = Encrypt(theString, theKey, "DESEDE", "Base64")> <!--- resulting string(strEncodedEnc): tc/Jb7E9w+HpU2Yvn5dA7ILGmyNTQM0h ---> As you can see, this was not returning the string we were hoping for. Seeking a solution, we ditched ColdFusion for this process and attempted to reproduce the token in PHP. Now I'm aware that various languages implement encryption in different ways - for example in the past managing encryption between a C# application and PHP back-end, I've had to play about with padding in order to get the two to talk, but my experience has been that PHP generally behaves when it comes to encryption standards. Anyway, on to the PHP source we tried, and the resulting string. /* PHP Circus (here be Elephants) */ $theKey="123412341234123412341234"; $theString="username=test123"; $strEncodedEnc=base64_encode(mcrypt_ecb (MCRYPT_3DES, $theKey, $theString, MCRYPT_ENCRYPT)); /* resulting string(strEncodedEnc): sfiSu4mVggia8Ysw98x0uw== */ As you can plainly see, we've got another string that differs from both the string expected by the payment processor AND the one produced by ColdFusion. Cue head-against-wall integration techniques. After many to-and-fro communications with the payment processor (lots and lots of reps stating 'we can't help with coding issues, you must be doing it incorrectly, read the manual') we were finally escalated to someone with more than a couple of brain-cells to rub together, who was able to step back and actually look at and diagnose the issue. He agreed, our CF and PHP attempts were not resulting in the correct string. After a quick search, he also agreed that it was not neccesarily our source, but rather how the two languages implemented their vision of the TripleDES standard. Coming into the office this morning, we were met by an email with a snippet of source code, in Perl. This is was the code they were directly using on their end to produce the expected token. #!/usr/bin/perl # Perl Crypt Calamity (here be...something) use strict; use CGI; use MIME::Base64; use Crypt::TripleDES; my $cgi = CGI->new(); my $param = $cgi->Vars(); $param->{key} = "123412341234123412341234"; $param->{string} = "username=test123"; my $des = Crypt::TripleDES->new(); my $enc = $des->encrypt3($param->{string}, $param->{key}); $enc = encode_base64($enc); $enc =~ s/\n//gs; # resulting string (enc): AYOF+kRtg239Mnyc8QIarw== So, there we have it. Three languages, three implementations of what they quote in the documentation as TripleDES Standard Encryption, and three totally different resulting strings. My question is, from your experience of these three languages and their implementations of the TripleDES algorithm, have you been able to get any two of them to give the same response, and if so what tweaks to the code did you have to make in order to come to the result? I understand this is a very drawn out question, but I wanted to give clear and precise setting for each stage of testing that we had to perform. I'll also be performing some more investigatory work on this subject later, and will post any findings that I come up with to this question, so that others may avoid this headache.

  Read the article

• C# Accessing controls from an outside class without "public"

  - by Kurt W

  I know this has been asked before but I believe my situation is a bit different -- or I don't understand the answers given. I have spent about 4 hours working on this solidly and finally realized, I just don't know what to do. I have 2 Forms (Form1, Settings) and a class I created called Themes. I have get/set properties that currently work but are all within Form1 and I would like to move as much code related to themeing as I can OUTSIDE of Form1 and into Themes.cs. Changing Theme: To change the theme, the user opens up the Settings form and selects a theme from the dropdown menu and presses the 'Set' button -- this all works, but now I want to move it into my own class and I can't get the code to compile. Here is example code that works before moving -- note that this is only 2 different controls I want to modify but there are about 30 total. I am abridging the code: Form 1: public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void btnSettings_Click(object sender, EventArgs e) { Settings frm = new Settings(this); frm.Show(); } private Color txtRSSURLBGProperty; private Color txtRSSURLFGProperty; public Color TxtRSSURLBGProperty { get { return txtRSSURLBGProperty; } set { txtRSSURL.BackColor = value; } } public Color TxtRSSURLFGProperty { get { return txtRSSURLFGProperty; } set { txtRSSURL.ForeColor = value; } } Settings Form: public partial class Settings : Form { public Settings() { InitializeComponent(); } private Form1 rssReaderMain = null; public Settings(Form requestingForm) { rssReaderMain = requestingForm as Form1; InitializeComponent(); } private void button2_Click(object sender, EventArgs args) { // Appearence settings for DEFAULT THEME if (cbThemeSelect.SelectedIndex == 1) { this.rssReaderMain.TxtRSSURLBGProperty = Color.DarkSeaGreen; this.rssReaderMain.TxtRSSURLFGProperty = Color.White; [......about 25 more of these....] } The theme class is currently empty. Again, the goal is to move as much code into the themes class (specifically the get/set statements if at all possible!) and hopefully just use a method similar to this within the Settings form once the proper drowndown item is selected: SetTheme(Default); I hope someone can help, and I hope I explained it right! I have been racking my brain and I need to have this done fairly soon! Much thanks in advance as I'm sure everyone says. I have teamviewer or logmein if someone wants to remote in -- that is just as easy. I can also send my project as a zip if needed. Thanks so much, Kurt Modified code for review: Form1 form: public partial class Form1 : ThemeableForm { public Form1() { InitializeComponent(); } ThemeableForm form: internal abstract class ThemeableForm : Form { private Color rssLabelBGProperty; private Color rssLabelFGProperty; public Color RssLabelBGProperty { get { return rssLabelBGProperty; } set { lRSS.BackColor = value; } } public Color RssLabelFGProperty { get { return rssLabelFGProperty; } set { lRSS.ForeColor = value; } } Settings form: public Settings(ThemeableForm requestingForm) { rssReaderMain = requestingForm as ThemeableForm; InitializeComponent(); } private ThemeableForm rssReaderMain = null; private void button2_Click(object sender, EventArgs args) { // Appearence settings for DEFAULT THEME if (cbThemeSelect.SelectedIndex == 1) { this.rssReaderMain.LRSSBGProperty = Color.DarkSeaGreen; this.rssReaderMain.LRSSFGProperty = Color.White; } Now the all the controls in my get/set (lRSS in the example code above) error out with does not exist in the current context. I also get the warning: Warning 1The designer could not be shown for this file because none of the classes within it can be designed. The designer inspected the following classes in the file: Form1 --- The base class 'RSSReader_BKRF.ThemeableForm' could not be loaded. Ensure the assembly has been referenced and that all projects have been built. 0 0

  Read the article

• Increase RGB components every Hour (r), Minute (g), Second (b) for digital clock

  - by TJ Fertterer

  So I am taking my first javascript class (total noob) and one of the assignments is to modify a digital clock by assigning the color red to hours, green minutes, blue to seconds, then increase the respective color component when it changes. I have successfully assigned a decimal color value (ex. "#850000" to each element (hours, minutes, seconds), but my brain is fried trying to figure out how to increase the brightness when hours, minutes, seconds change, i.e. red goes up to "#870000" changing from 1:00:00 pm to 2:00:00 pm. I've searched everywhere with no help on how to successfully do this. Here is what I have so far and any help on this would be greatly appreciated. TJ <script type="text/javascript"> <!-- function updateClock() { var currentTime = new Date(); var currentHours = currentTime.getHours(); var currentMinutes = currentTime.getMinutes(); var currentSeconds = currentTime.getSeconds(); // Pad the minutes with leading zeros, if required currentMinutes = ( currentMinutes < 10 ? "0" : "" ) + currentMinutes; // Pad the seconds with leading zeros, if required currentSeconds = ( currentSeconds < 10 ? "0" : "" ) + currentSeconds; // Choose either "AM" or "PM" as appropriate var timeOfDay = ( currentHours < 12 ) ? "AM" : "PM"; // Convert the hours component to 12-hour format currentHours = ( currentHours > 12 ) ? currentHours - 12 : currentHours; // Convert an hours component if "0" to "12" currentHours = ( currentHours == 0 ) ? 12 : currentHours; // Get hold of the html elements by their ids var hoursElement = document.getElementById("hours"); document.getElementById("hours").style.color = "#850000"; var minutesElement = document.getElementById("minutes"); document.getElementById("minutes").style.color = "#008500"; var secondsElement = document.getElementById("seconds"); document.getElementById("seconds").style.color = "#000085"; var am_pmElement = document.getElementById("am_pm"); // Put the clock sections text into the elements' innerHTML hoursElement.innerHTML = currentHours; minutesElement.innerHTML = currentMinutes; secondsElement.innerHTML = currentSeconds; am_pmElement.innerHTML = timeOfDay; } // --> </script> </head> <body onload="updateClock(); setInterval( 'updateClock()', 1000 )"> <h1 align="center">The JavaScript digital clock</h1> <h2 align="center">Thomas Fertterer - Lab 2</h2> <div id='clock' style="text-align: center"> <span id="hours"></span>: <span id='minutes'></span>: <span id='seconds'></span> <span id='am_pm'></span> </div> </body> </html>

  Read the article

• What does the `forall` keyword in Haskell/GHC do?

  - by JUST MY correct OPINION

  I've been banging my head on this one for (quite literally) years now. I'm beginning to kinda/sorta understand how the foreach keyword is used in so-called "existential types" like this: data ShowBox = forall s. Show s => SB s (This despite the confusingly-worded explanations of it in the fragments found all around the web.) This is only a subset, however, of how foreach is used and I simply cannot wrap my mind around its use in things like this: runST :: forall a. (forall s. ST s a) -> a Or explaining why these are different: foo :: (forall a. a -> a) -> (Char,Bool) bar :: forall a. ((a -> a) -> (Char, Bool)) Or the whole RankNTypes stuff that breaks my brain when "explained" in a way that makes me want to do that Samuel L. Jackson thing from Pulp Fiction. (Don't follow that link if you're easily offended by strong language.) The problem, really, is that I'm a dullard. I can't fathom the chicken scratchings (some call them "formulae") of the elite mathematicians that created this language seeing as my university years are over two decades behind me and I never actually had to put what I learnt into use in practice. I also tend to prefer clear, jargon-free English rather than the kinds of language which are normal in academic environments. Most of the explanations I attempt to read on this (the ones I can find through search engines) have these problems: They're incomplete. They explain one part of the use of this keyword (like "existential types") which makes me feel happy until I read code that uses it in a completely different way (like runST, foo and bar above). They're densely packed with assumptions that I've read the latest in whatever branch of discrete math, category theory or abstract algebra is popular this week. (If I never read the words "consult the paper whatever for details of implementation" again, it will be too soon.) They're written in ways that frequently turn even simple concepts into tortuously twisted and fractured grammar and semantics. (I suspect that the last two items are the biggest problem. I wouldn't know, though, since I'm too much a dullard to comprehend them.) It's been asked why Haskell never really caught on in industry. I suspect, in my own humble, unintelligent way, that my experience in figuring out one stupid little keyword -- a keyword that is increasingly ubiquitous in the libraries being written these days -- are also part of the answer to that question. It's hard for a language to catch on when even its individual keywords cause years-long quests to comprehend. Years-long quests which end in failure. So... On to the actual question. Can anybody completely explain the foreach keyword in clear, plain English (or, if it exists somewhere, point to such a clear explanation which I've missed) that doesn't assume I'm a mathematician steeped in the jargon?

  Read the article

• Snake game, can't add new rectangles?

  - by user1814358

  I had seen some problem on other forum, and i tried to solve them but unsuccesfully, now is too intersting for me and i just need to solve this for my ego... lol Main problem is when snake eat first food, snake added one rectangle, when snake eat second food nothings changed? When snake head position and food position are same, then i try to add another rectangle, i have list where i stored rectangles coordinates x and y. What do you think, how i can to solve this problem? I think that i'm so close, but my brain has stopped. :( code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; namespace Zmijice { enum Kontrole { Desno,Levo,Gore,Dole,Stoj } public partial class Zmijice : Form { int koox; int kooy; private int x; private int y; private int c; private int b; private const int visina=20; //width private const int sirina=20; //height //private int m = 20; //private int n = 20; private List<int> SegmentX = new List<int>(); private List<int> SegmentY = new List<int>(); Random rnd = new Random(); private Kontrole Pozicija; public Zmijice() { InitializeComponent(); //slucajne pozicije pri startu x = rnd.Next(1, 20) * 20; y = rnd.Next(1, 20) * 20; c = rnd.Next(1, 20) * 20; b = rnd.Next(1, 20) * 20; Pozicija = Kontrole.Stoj; //stop on start } private void Tajmer_Tick(object sender, EventArgs e) { if (Pozicija == Kontrole.Stoj) { //none } if (Pozicija == Kontrole.Desno) { x += 20; } else if (Pozicija == Kontrole.Levo) { x -= 20; } else if (Pozicija == Kontrole.Gore) { y -= 20; } else if (Pozicija == Kontrole.Dole) { y += 20; } Invalidate(); } private void Zmijice_KeyDown(object sender, KeyEventArgs e) { if (e.KeyCode == Keys.Down) { Pozicija = Kontrole.Dole; } else if (e.KeyCode == Keys.Up) { Pozicija = Kontrole.Gore; } else if (e.KeyCode == Keys.Right) { Pozicija = Kontrole.Desno; } else if (e.KeyCode == Keys.Left) { Pozicija = Kontrole.Levo; } } private void Zmijice_Paint(object sender, PaintEventArgs e) { int counter = 1; //ako je pojela hranu if (x==c && y==b) { counter++; c = rnd.Next(1, 20); //nova pozicija hrrane c = c * 20; b = rnd.Next(1, 20); b = b * 20; //povecaj zmijicu SegmentX.Add(x); SegmentY.Add(y); //label1.Text = SegmentX.Count().ToString() + " " + SegmentY.Count().ToString(); //left if (Pozicija == Kontrole.Levo) { koox = x+20; kooy = y; } //right if (Pozicija == Kontrole.Desno) { koox = x-20; kooy = y; } //up if (Pozicija == Kontrole.Gore) { koox = x; kooy = y+20; } //down if (Pozicija == Kontrole.Dole) { koox = x; kooy = y-20; } } foreach (int k in SegmentX) { foreach (int l in SegmentY) { e.Graphics.FillRectangle(Brushes.Orange, koox, kooy, sirina, visina); } } koox = x; kooy = y; e.Graphics.FillRectangle(Brushes.DarkRed, x, y, sirina, visina); e.Graphics.FillRectangle(Brushes.Aqua, c, b, sirina, visina); } } }

  Read the article

• Binary operator overloading on a templated class (C++)

  - by GRB

  Hi all, I was recently trying to gauge my operator overloading/template abilities and as a small test, created the Container class below. While this code compiles fine and works correctly under MSVC 2008 (displays 11), both MinGW/GCC and Comeau choke on the operator+ overload. As I trust them more than MSVC, I'm trying to figure out what I'm doing wrong. Here is the code: #include <iostream> using namespace std; template <typename T> class Container { friend Container<T> operator+ <> (Container<T>& lhs, Container<T>& rhs); public: void setobj(T ob); T getobj(); private: T obj; }; template <typename T> void Container<T>::setobj(T ob) { obj = ob; } template <typename T> T Container<T>::getobj() { return obj; } template <typename T> Container<T> operator+ <> (Container<T>& lhs, Container<T>& rhs) { Container<T> temp; temp.obj = lhs.obj + rhs.obj; return temp; } int main() { Container<int> a, b; a.setobj(5); b.setobj(6); Container<int> c = a + b; cout << c.getobj() << endl; return 0; } This is the error Comeau gives: Comeau C/C++ 4.3.10.1 (Oct 6 2008 11:28:09) for ONLINE_EVALUATION_BETA2 Copyright 1988-2008 Comeau Computing. All rights reserved. MODE:strict errors C++ C++0x_extensions "ComeauTest.c", line 27: error: an explicit template argument list is not allowed on this declaration Container<T> operator+ <> (Container<T>& lhs, Container<T>& rhs) ^ 1 error detected in the compilation of "ComeauTest.c". I'm having a hard time trying to get Comeau/MingGW to play ball, so that's where I turn to you guys. It's been a long time since my brain has melted this much under the weight of C++ syntax, so I feel a little embarrassed ;). Thanks in advance. EDIT: Eliminated an (irrelevant) lvalue error listed in initial Comeau dump.

  Read the article

• Haskell Monad bind currying

  - by Chime

  I am currently in need of a bit of brain training and I found this article on Haskell and Monads I'm having trouble with exercise 7 re. Randomised function bind. To make the problem even simpler to experiment, I replaced the StdGen type with an unspecified type. So instead of... bind :: (a -> StdGen -> (b,StdGen)) -> (StdGen -> (a,StdGen)) -> (StdGen -> (b,StdGen)) I used... bind :: (a -> c -> (b,c)) -> (c -> (a,c)) -> (c -> (b,c)) and for the actual function impelemtation (just straight from the exercise) bind f x seed = let (x',seed') = x seed in f x' seed' and also 2 randomised functions to trial with: rndf1 :: (Num a, Num b) => a -> b -> (a,b) rndf1 a s = (a+1,s+1) rndf2 :: (Num a, Num b) => a -> b -> (a,b) rndf2 a s = (a+8,s+2) So with this in a Haskell compiler (ghci), I get... :t bind rndf2 bind rndf2 :: (Num a, Num c) => (c -> (a, c)) -> c -> (a, c) This matches the bind curried with rndf2 as the first parameter. But the thing I don't understand is how... :t bind rndf2 . rndf1 Suddenly gives bind rndf2 . rndf1 :: (Num a, Num c) => a -> c -> (a, c) This is the correct type of the composition that we are trying to produce because bind rndf2 . rndf1 Is a function that: takes the same parameter type(s) as rndf1 AND takes the return from rndf1 and pipes it as an input of rndf2 to return the same type as rndf2 rndf1 can take 2 parameters a -> c and rndf2 returns (a, c) so it matches that a composition of these function should have type: bind rndf2 . rndf1 :: (Num a, Num c) => a -> c -> (a, c) This does not match the naive type that I initially came up with for bind bind f :: (a -> b -> (c, d)) -> (c, d) -> (e, f) Here bind mythically takes a function that takes two parameters and produces a function that takes a tuple in order that the output from rndf1 can be fed into rndf2 why the bind function needs to be coded as it is Why the bind function does not have the naive type

  Read the article

• Issue with undefined namespace

  - by SoBeK

  "xmlns="VL01" Seems to be causing the style-sheet to fail(works fine if removed), do no know how to address it the style-sheet. I feel like this is basic XLST 101 but I am having a hard time wrapping my brain around it. Any assisting would be greatly appreciated. Cheers XML <?xml version="1.0" encoding="utf-8"?> <Report xsi:schemaLocation="VL01 http://site.com/ReportServer?%2FVMS%20Reports%2FVL01&amp;rs%3ACommand=Render&amp;rs%3AFormat=XML&amp;rs%3ASessionID=lk44ff55z5q3ck3b5pfuxo45&amp;rc%3ASchema=True" Name="VL01" textbox41="VL01 - Checklist Report&#xD;&#xA;" textbox1946=" 2) Target Element&#xD;&#xA;     Target Element List&#xD;&#xA;        Windows 7&#xD;&#xA;3) Report Options&#xD;&#xA; xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="VL01"> <list2> <Item_Collection> <Item /> </Item_Collection> </list2> <list1> <list1_Details_Group_Collection> <list1_Details_Group Key="V0001070" EffectiveDate="04 Mar 1998 16:03:47:000" LongName2="Name..."/> </list1_Details_Group_Collection> </list1> </Report> XSL <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <xsl:output method="xml" version="4.0" indent="yes"/> <xsl:variable name="var-checklist_name"> <xsl:value-of select="substring-after(substring-before(translate(Report/@textbox1946, '&#xD;&#xA;', ''),'3)'),'Target&#x00A0;Element&#x00A0;List')"/> </xsl:variable><xsl:template match="/"> <html> <body> <table> <xsl:apply-templates select="Report/list1/list1_Details_Group_Collection"/> </table> </body> </html> </xsl:template> <xsl:template match="Report/list1/list1_Details_Group_Collection"> <xsl:for-each select="list1_Details_Group"> <Import_List> <Checklist_Name> <xsl:value-of select="normalize-space(translate($var-checklist_name, '&#x00A0;', ' '))"/> </Checklist_Name> <Vuln_ID><xsl:value-of select="number(substring-after(@VulKey,'V'))"/></Vuln_ID> <Short_Name><xsl:value-of select="substring(@LongName2,1,255)"/></Short_Name> <Release_Date><xsl:value-of select="substring(@EffectiveDate,1,11)"/></Release_Date> </Import_List> </xsl:for-each> </xsl:template> </xsl:stylesheet>

  Read the article

< Previous Page | 21 22 23 24 25 26  | Next Page >