Search Results

Search found 717 results on 29 pages for 'christopher young'.

Page 25/29 | < Previous Page | 21 22 23 24 25 26 27 28 29  | Next Page >

  • Windows 7 boot issues

    - by Michael
    Ok, I tried to install linux and dual boot my laptop with 7 ultimate. I messed up. When I tried to boot to 7 it said no. Something along the lines of device not found. So I being young and stupid I uninstalled linux which I could boot into, and I still could not boot to windows. Next step was to run the startup fixes from the boot cd. Swing and a miss, I also ran the fixmbr and fixboot. Which brings us up to my current place. I installed 7 again on my blank partition in hopes I could access my other partion. No dice. So my question to yall is how can I fix my original filesystem or at least get to the stuff on it. In the new 7 install the old partion does not even have a drive letter. That is my sad story any help would be apreciated.

    Read the article

  • Very high-pitched noise when computer does something intense?

    - by Starkers
    "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

    Read the article

  • Linux CentOS strange memory readings

    - by user2008937
    I am actually a young junior sys admin. I have a question - i am trying to understand how linux deals with memory... while playing around different monitoring programs I found some strange thing. When I run top on my laptop it shows me that FIREFOX process with pid 8778 takes 18,3% of memory (%MEM column). grep "MemTotal" /proc/meminfo Above command give me 1848336kb/1024 = 1805megs of memory (its ok - i have 2 gigs of ram). So if the firefox process takes 18,3% of MEM(according to tops %MEM column) then it takes 0.183 * 1805 which is approximately 325mb of memory. Quite a lot as for firefox... But well, in Linux there are lots of shared libraries that programs commonly uses (like famous libc). And those libraries are added to memory utilization of every process that uses it in the system, despite they are actually reading same file(single object in memory). So top may show too big mem utilization because of those shared libraries. Well, it is time to use PMAP which should show us the real mem utilization of process. But.. pmap -d $(pidof firefox) mapped: 983460K writeable/private: 757164K shared: 66416K so pmap shows that 983460/1024=993MB of memory is mapped to this process. It is in fact much bigger than mem utilization showed by top. Whats wrong here? How pmap can show more than top? even when top adds also the shared libraries (which in fact are single objects in memory) for each process that uses it? and pmap omits it? Regards Krzysztof

    Read the article

  • How to set an executable white list?

    - by izabera
    Under Linux, is it possible to set a white-list of executables for a certain group of users? I need them to be unable to use, for example, make, gcc and executables on removable disks. How can this be done? Edit, let me explain better. I'm dealing with a high school IT system, young geeks that (during the lessons) want to play, surf the net, damage those computer however they can. The major step to achieve this goal was to remove the system they're familiar with and install Ubuntu in all the computers. This actually works quite well, but recent events proved that this is not enough. I want to allow them to execute certain safe programs, like Open Office, and to deny any other program, whether it is preinstalled software, something they carry in usb drives, a downloaded program or a script they program on site. It's possible to remove the 'x' permission on any file on the pc, but of course it would be impractical. Furthermore, they would be able to run anything they download. I thought the best solution would be to make a white-list of safe programs and to deny anything else, but I don't really know how to do it. Any idea is helpful.

    Read the article

  • XNA Notes 002

    - by George Clingerman
    This past week (much like every week in the XNA community) was filled with things happening and people doing cool things (and getting noticed for doing cool things!). You can definitely tell there are some Xbox LIVE Indie game developers starting to make some names for themselves. Can’t wait to name drop them at bars. Me- “Oh you played Game X? Yeah, I know the guy that made that. Pretty cool guy.” Yeah, I’ll be THAT guy.   Time Critical XNA News 30 days left to submit XBLIGs made in XNA Game Studio 3.1 http://blogs.msdn.com/b/xna/archive/2011/01/08/30-days-left-to-submit-xna-gs-3-1-games-to-app-hub.aspx Jeromy Walsh wants you to know his XNA 4.0 Winter Workshop starting soon, go get signed up! And the forum is now LIVE on GameDev.net http://gamedevelopedia.com/ http://tinyurl.com/4gg2cfv The XNA Team Per Nick Gravelyn, Aaron Stebner’s blog post is a must read for icons on Windows Phone http://forums.create.msdn.com/forums/p/72022/439597.aspx#439597 http://blogs.msdn.com/b/astebner/archive/2010/10/01/10070507.aspx Shawn Hargreaves writes about Sprite Billboards in a 3D world http://blogs.msdn.com/b/shawnhar/archive/2011/01/12/spritebatch-billboards-in-a-3d-world.aspx XNA MVPs Andy “The ZMan” Dunn wants YOU to come to the MVP Summit and run a 5K http://www.indiegameguy.com/blogs/zman/archive/2010/12/26/come-to-the-mvp-summit-and-run-a-5k-yes-you.aspx Jim Perry updates his forum signature just to make it clear that he’s not speaking for Microsoft or giving official information (LOL, thanks Jim, now if only people will take the time to read that...) XNA MVP | Please use the Forum Search and read the Forum FAQs | My posts are not official info http://forums.create.msdn.com/forums/p/70849/439613.aspx#439613 XNA Developers Robert Boyd (@werezombie) working hard at converting his RPG engine used to make Breath of Death VII and Chtulu Saves the World to XNA 4.0. If you haven’t done the upgrade yet yourself, might be useful to read back through his tweets and recent forum posts to see the problems/solutions he’s encountered. http://forums.create.msdn.com/forums/p/71834/438099.aspx#438099 http://www.twitter.com/werezompire SpynDoctorGames is in the final phase before the release of Your Doodles are Bugged for the PC! Going to be interesting to watch as more XNA game developers explore the PC game market for their games. http://twitter.com/SpynDoctorGames/statuses/24503173217521664 http://www.spyn-doctor.de @DrMistry shares some details of his next title YoYoYo http://www.mstargames.co.uk/mistryblogmain/35-genblog/177-a-new-year-a-new-game-and-maybe-a-new-approach.html Travis Woodward (@RabidLionGames) has a blog post coming this weekend on Farseer and Mario-like platformer movement. http://twitter.com/RabidLionGames/statuses/24992762021548032 http://www.rabidlion.com/ S4G Interview with Radiangames http://n4g.com/news/679492/s4g-interview-with-radiangames XBLAratings.com interviews Steve Flores (@DragonDivide) developer of Alpha Squad http://www.xblaratings.com/developer-qaa/3621-alpha-squad-developer-interview XBox LIVE Indie Games If you haven’t been reading the roundups on IndieGames by NaviFairy on GayGamer, you’ve been missing out! http://gaygamer.net/2011/01/xbox_indie_review_roundup_1112.html Armless Octopus posts the Top 20 Games of 2010 Part 1 http://www.armlessoctopus.com/2011/01/10/top-20-xbox-live-indie-games-of-2010-part-1/ Armless Octopus posts the Top 20 Games of 2010 Part 2 http://www.armlessoctopus.com/2011/01/12/top-20-xbox-live-indie-games-of-2010-%E2%80%93-part-2/ Xbox LIVE Indie Game Reviews http://www.gamemarx.com/ Don’t forget to be following @XboxHornet . That’s a great way to snag free copies of Xbox LIVE Indie Games http://twitter.com/XboxHornet/statuses/24471103808208896 http://www.xboxhornet.com/wordpress/ Xbox LIVE Indie Game Review posts the top 20 Xbox 360 LIVE Indie Games of 2010 http://www.xbox-360-community-games-reviews.com/top-20-best-xbox-360-live-indie-games-of-2010/ VVGtv to Stream #XBLIG Again! Help out if you can. http://vvgtv.com/2011/01/07/vvgtv-to-stream-xblig-again/ Indie Gamer Magazine Issue 14 has a look at the Xbox LIVE Winter Indie Game Uprisiing http://www.indiegamemag.com/issue14/ XNA Game Development Andrew Russell announced and asked for help in his development of ExEn: XNA for iPhone, Android and Silverlight http://rockethub.com/projects/752-exen-xna-for-iphone-android-and-silverlight App Hub forums letting you down? Don’t forget about StackOverflow and the game development specific version gamedev.stackexchange http://stackoverflow.com/questions/tagged/xna http://gamedev.stackexchange.com/questions/tagged/xna Transmute gets an update from Aaron Foley (@slyprid) and you can now add and visually edit parallax layers to your 2D tile game. http://twitpic.com/3nudj0 http://twitter.com/slyprid/statuses/23418379574448128 http://forgottenstarstudios.com/Transmute/default.html Webcomics Weekly #75 touches on some feelings I’ve seen people try to express (myself included) when talking about game development and what types of games should be released for XBLIG http://www.pvponline.com/2011/01/05/webcomics-weekly-75-sour-oats/ Setting up a new PC for XNA development? Here’s a site that helps you quickly build a installer for all the most common applications developers use. http://ninite.com/ Fun wew thread on the XNA forums asking XBLIG/XNA developers just what their Top 10 favorite video games of all time are. http://forums.create.msdn.com/forums/107.aspx Christopher Hill (@Xalterax) stumbled across an entire community that does nothing but create box art. This is a great potential resource for Xbox LIVE Indie Game developers to get some awesome box art for their games. http://forums.create.msdn.com/forums/p/46582/441451.aspx#441451 http://www.vgboxart.com/browse/plat/360/ Don’t forget about the XNA Wiki, fantastic community resource (and roll up those sleeves and contribute already!) http://xnawiki.com/index.php?title=Main_Page

    Read the article

  • Pigs in Socks?

    - by MightyZot
    My wonderful wife Annie surprised me with a cruise to Cozumel for my fortieth birthday. I love to travel. Every trip is ripe with adventure, crazy things to see and experience. For example, on the way to Mobile Alabama to catch our boat, some dude hauling a mobile home lost a window and we drove through a cloud of busting glass going 80 miles per hour! The night before the cruise, we stayed in the Malaga Inn and I crawled UNDER the hotel to look at an old civil war bunker. WOAH! Then, on the way to and from Cozumel, the boat plowed through two beautiful and slightly violent storms. But, the adventures you have while travelling often pale in comparison to the cult of personalities you meet along the way.  :) We met many cool people during our travels and we made some new friends. Todd and Andrea are in the publishing business (www.myneworleans.com) and teaching, respectively. Erika is a teacher too and Matt has a pig on his foot. This story is about the pig. Without that pig on Matt’s foot, we probably would have hit a buoy and drowned. Alright, so…this pig on Matt’s foot…this is no henna tatt, this is a man’s tattoo. Apparently, getting tattoos on your feet is very painful because there is very little muscle and fat and lots of nifty nerves to tell you that you might be doing something stupid. Pig and rooster tattoos carry special meaning for sailors of old. According to some sources, having a tattoo of a pig or rooster on one foot or the other will keep you from drowning. There are many great musings as to why a pig and a rooster might save your life. The most plausible in my opinion is that pigs and roosters were common livestock tagging along with the crew. Since they were shipped in wooden crates, pigs and roosters were often counted amongst the survivors when ships succumbed to Davy Jones’ Locker. I didn’t spend a whole lot of time researching the pig and the rooster, so consider these musings as you would a grain of salt. And, I was not able to find a lot of what you might consider credible history regarding the tradition. What I did find was a comfort, or solace, in the maritime tradition. Seems like raw traditions like the pig and the rooster are in danger of getting lost in a sea of non-permanence. I mean, what traditions are us old programmers and techies leaving behind for future generations? Makes me wonder what Ward Christensen has tattooed on his left foot.  I guess my choice would have to be a Commodore 64.   (I met Ward, by the way, in an elevator after he received his Dvorak awards in 1992. He was a very non-assuming individual sporting business casual and was very much a “sailor” of an old-school programmer. I can’t remember his exact words, but I think they were essentially that he felt it odd that he was getting an award for just doing his work. I’m sure that Ward doesn’t know this…he couldn’t have set a more positive example for a young 22 year old programmer. Thanks Ward!)

    Read the article

  • Friday Fun: The Search For Wondla

    - by Asian Angel
    The best day of the week is finally here again, so it is time to have some fun while waiting to go home for the weekend. The game we have for you today takes you far into humanity’s future where you journey with Eva Nine in her quest to find other humans. Note: Today’s game comes with a double bonus! First, there is a sequel game that you can move on to once you have completed the first one. Second, there are three wallpapers available in multiple sizes for those who enjoy the characters and artwork presented in the game (see below). The Search For Wondla The object of the game is to find the differences between two similar looking images based on artwork from The Search For Wondla by Tony DiTerlizzi. Are you ready to join Eva Nine in her quest to find other humans in the future? Note: There is a version available for those who would like to play The Search For Wondla on their iPads! The first game has 28 levels of difference finding goodness for you to work through. Each level will list the minimum number of differences that you need to find to progress to the next level. If you need a hint along the way just click on the Shake or Reveal options at the bottom of the game play window. Get a level completed quickly enough and you get bonus points! There will also be differences in the images for individual levels each time you play the game, so have fun! Note: The second game has 12 levels to complete. To give you a good feel for the game we have covered the first six levels here and provided seven clues for each level (you are only required to find a minimum of five). Eva Nine viewing the holographic outdoor projections in the main hub of her living quarters… Eva Nine is in a grumpy mood as Muthr visits her at bedtime… Eva Nine in her secret hideaway visiting old “childhood friends” as she contemplates her recent survival test failure. Eva Nine viewing the entire set of floor plans for the underground sanctuary where she was born and has been growing up. Eva Nine’s escape to the surface as the underground sanctuary is attacked by the bounty hunter creature Besteel. Eva Nine on the surface for the first time in her young life. Will she be successful in her quest? There is only one way to find out! Play The Search For Wondla Part 1 Play The Search For Wondla Part 2 Bonus Content If you have enjoyed this game you can learn more about the book and download the three wallpapers shown here by visiting the link below! Note: The wallpapers come in the following sizes: 1024*768, 1280*800, 1280*1024, 1440*900, iPhone, iPhone4, and iPad (click on the Extras link at the bottom of the page). Visit the Search For Wondla Homepage Do you enjoy playing difference finding games? Then you will definitely want to have a look at another wonderful game that we have covered here: Friday Fun: Isis Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

    Read the article

  • SQL SERVER – Vacation, Travel and Study – A New Concept

    - by pinaldave
    Quite often when developers go to training sessions they either find it very boring because of study or great because they treat it as a vacation. There should be a perfect balance between study and extra activities. Studying is Boring Studying is very hard. Nobody likes to study, very few people are going to list “studying” as one of their favorite hobbies.  Already my young daughter knows she doesn’t want to study, and I don’t want to either.  If you read my blog regularly you know that I am always saying that we need to be students for life.  However, all philosophy aside, if you are put in a room with an instructor to study for eight hours a day, you are going to feel bored, uncomfortable, and unhappy.  I was a trainer myself, and I understand that all-day study sessions are no fun – even for the trainer.  I always tried to be entertaining, but even eight hours of jokes and laughter is tiresome.  Eight hours at a comedy club would be boring after a little while – and if we can’t even enjoy fun stuff for eight hours straight, how can we expect to study for eight hours straight? Studying for Career or Certification Even those who have advanced degrees and went to college for years, or even decades, find studying hard.  There is a difference between studying for a career and studying for a certification.  At least to get a degree there is a variety of subjects, with labs, exams, and practice problems to make things more interesting.  You can also choose your major and what you want to spend your time studying.  For certification you do not have this luxury.  You have to learn and memorize specific parts, and there is no option to change your major if you don’t like it.  Your option is to gain your certification, or fail.  Many people will find that last option unacceptable. Studying at Vacation We have established: eight hours of uninterrupted study is boring.  That is why I am so excited about what my very good friend is doing with Koenig Solutions.  His whole goal was to make classes that are intensive but not in a traditional format.  He adds in aspects of the vacation.  It is true that you will study and sit with instructors for six or eight hours a day, but in the mornings and evenings you can go out and see the sights in exotic locations.  He has chosen the locations for his training courses for their proximity to tourist attractions like the Himalayas, the Taj Mahal, and Goa, India’s most popular resort town.  Every location has access to great experiences like river rafting, safari tours, or meditation.  There are five locations to choose from: Dehli, Dehradun, Shimla (close to the Himalayas), Goa Beach, and Dubai.  After a day of classes and hours of sight-seeing, you will be more than ready to return to campus tired and ready to study.  This is the kind of study I can do! My friend’s point is that studying and fun can still go hand-in-hand.  How many times have we heard a professor say this?  But this time it is true.  There is great fun in learning in exotic locations.  If you want to travel in India and are interested in also taking the opportunity to learn something, let Koenig Solutions know. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Talking JavaOne with Rock Star Simon Ritter

    - by Janice J. Heiss
    Oracle’s Java Technology Evangelist Simon Ritter is well known at JavaOne for his quirky and fun-loving sessions, which, this year include: CON4644 -- “JavaFX Extreme GUI Makeover” (with Angela Caicedo on how to improve UIs in JavaFX) CON5352 -- “Building JavaFX Interfaces for the Real World” (Kinect gesture tracking and mind reading) CON5348 -- “Do You Like Coffee with Your Dessert?” (Some cool demos of Java of the Raspberry Pi) CON6375 -- “Custom JavaFX Charts: (How to extend JavaFX Chart controls with some interesting things) I recently asked Ritter about the significance of the Raspberry Pi, the topic of one of his sessions that consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there's one definitive thing that makes the RP significant,” observed Ritter, “but a combination of things that really makes it stand out. First, it's the cost: $35 for what is effectively a completely usable computer. OK, so you have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM processor is also significant, as it avoids problems like cooling (no heat sink or fan) and can use a USB power brick.  Combine these two things with the immense groundswell of community support and it provides a fantastic platform for teaching young and old alike about computing, which is the real goal of the project.”He informed me that he’ll be at the Raspberry Pi meetup on Saturday (not part of JavaOne). Check out the details here.JavaFX InterfacesWhen I asked about how JavaFX can interface with the real world, he said that there are many ways. “JavaFX provides you with a simple set of programming interfaces that can create complex, cool and compelling user interfaces,” explained Ritter. “Because it's just Java code you can combine JavaFX with any other Java library to provide data to display and control the interface. What I've done for my session is look at some of the possible ways of doing this using some of the amazing hardware that's available today at very low cost. The Kinect sensor has added a new dimension to gaming in terms of interaction; there's a Java API to access this so you can easily collect skeleton tracking data from it. Some clever people have also written libraries that can track gestures like swipes, circles, pushes, and so on. We use these to control parts of the UI. I've also experimented with a Neurosky EEG sensor that can in some ways ‘read your mind’ (well, at least measure some of the brain functions like attention and meditation).  I've written a Java library for this that I include as a way of controlling the UI. We're not quite at the stage of just thinking a command though!” Here Comes Java EmbeddedAnd what, from Ritter’s perspective, is the most exciting thing happening in the world of Java today? “I think it's seeing just how Java continues to become more and more pervasive,” he said. “One of the areas that is growing rapidly is embedded systems.  We've talked about the ‘Internet of things’ for many years; now it's finally becoming a reality. With the ability of more and more devices to include processing, storage and networking we need an easy way to write code for them that's reliable, has high performance, and is secure. Java fits all these requirements. With Java Embedded being a conference within a conference, I'm very excited about the possibilities of Java in this space.”Check out Ritter’s sessions or say hi if you run into him. Originally published on blogs.oracle.com/javaone.

    Read the article

  • Talking JavaOne with Rock Star Simon Ritter

    - by Janice J. Heiss
    Oracle’s Java Technology Evangelist Simon Ritter is well known at JavaOne for his quirky and fun-loving sessions, which, this year include: CON4644 -- “JavaFX Extreme GUI Makeover” (with Angela Caicedo on how to improve UIs in JavaFX) CON5352 -- “Building JavaFX Interfaces for the Real World” (Kinect gesture tracking and mind reading) CON5348 -- “Do You Like Coffee with Your Dessert?” (Some cool demos of Java of the Raspberry Pi) CON6375 -- “Custom JavaFX Charts: (How to extend JavaFX Chart controls with some interesting things) I recently asked Ritter about the significance of the Raspberry Pi, the topic of one of his sessions that consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there's one definitive thing that makes the RP significant,” observed Ritter, “but a combination of things that really makes it stand out. First, it's the cost: $35 for what is effectively a completely usable computer. OK, so you have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM processor is also significant, as it avoids problems like cooling (no heat sink or fan) and can use a USB power brick.  Combine these two things with the immense groundswell of community support and it provides a fantastic platform for teaching young and old alike about computing, which is the real goal of the project.”He informed me that he’ll be at the Raspberry Pi meetup on Saturday (not part of JavaOne). Check out the details here.JavaFX InterfacesWhen I asked about how JavaFX can interface with the real world, he said that there are many ways. “JavaFX provides you with a simple set of programming interfaces that can create complex, cool and compelling user interfaces,” explained Ritter. “Because it's just Java code you can combine JavaFX with any other Java library to provide data to display and control the interface. What I've done for my session is look at some of the possible ways of doing this using some of the amazing hardware that's available today at very low cost. The Kinect sensor has added a new dimension to gaming in terms of interaction; there's a Java API to access this so you can easily collect skeleton tracking data from it. Some clever people have also written libraries that can track gestures like swipes, circles, pushes, and so on. We use these to control parts of the UI. I've also experimented with a Neurosky EEG sensor that can in some ways ‘read your mind’ (well, at least measure some of the brain functions like attention and meditation).  I've written a Java library for this that I include as a way of controlling the UI. We're not quite at the stage of just thinking a command though!” Here Comes Java EmbeddedAnd what, from Ritter’s perspective, is the most exciting thing happening in the world of Java today? “I think it's seeing just how Java continues to become more and more pervasive,” he said. “One of the areas that is growing rapidly is embedded systems.  We've talked about the ‘Internet of things’ for many years; now it's finally becoming a reality. With the ability of more and more devices to include processing, storage and networking we need an easy way to write code for them that's reliable, has high performance, and is secure. Java fits all these requirements. With Java Embedded being a conference within a conference, I'm very excited about the possibilities of Java in this space.”Check out Ritter’s sessions or say hi if you run into him.

    Read the article

  • Challenges and Opportunities to Drive Change in the Healthcare System Explored at America’s Health Insurance Plans Exchange Conference and Institute 2013

    - by elaine blog
    The program theme at the June America’s Health Insurance Plans (AHIP) Exchange Conference and AHIP’s Institute 2013 was Transforming Our Health Care System: Navigating and Succeeding in the New Marketplace.  Topics included care delivery transformation, innovation for a new healthcare eco system, Health Insurance Exchanges, the nexus of consumerism, retail and healthcare, driving value through improved operations and leveraging technology, data and innovation to transform care. Oracle participated as a sponsor of both conferences, signaling the significant investment and activity Oracle continues to make in helping health plans, providers and government agencies become more efficient and more relevant in the healthcare market place. AHIP is a national trade association representing the health insurance industry. AHIP’s members provide health and supplemental benefits to more than 200 million Americans through employer-sponsored coverage, the individual insurance market and public programs such as Medicare and Medicaid.   AHIP advocates for public policies that expand access to affordable health care. Health plans are focusing on the Health Insurance Exchanges and the opportunities they offer to provide better access and higher quality healthcare.  With the opportunities come operational challenges to implementation and innovative technology solutions to consider.   At the Exchange Conference, Oracle hosted a breakfast symposium on “Strategies for Success:  Driving Business Transformation in the Growing Health Insurance Exchange Market”. With Health Insurance Exchanges as catalysts for change, attendees learned about how to achieve integration within an Exchange and deploy new business strategies to support health reform initiatives. Discussion covered steps and processes to successfully establish and implement enrollment systems, quote to card activities, program pricing, claims billing, automated claims processing and new customer service tools. Piyush Pushkar, COO of Benefitalign, an Oracle partner that provides solutions to adopt innovative business models for retail, HIX, consumer-centric health plan and benefits administration, spoke on the state of the Exchanges in the U.S. and the activities health plans are engaged in to support individuals entering the healthcare system, including sales automation, member enrollment automation/portals and integration strategies with the Exchanges. The Oracle and Benefitalign partnership allows seamless integration between a health plan enrollment solution with the HIX individual market and allows for the health plan to customize and characterize the offerings available to the HIX that may or may not be available through other channels.  This approach can benefit the health plan through separation of interests, but also because some state-run HIXs require such separation. Janice W. Young, Program Director, Payer IT Strategies, IDC Health Insights, reviewed a survey of health plans on their investment priorities for this last year as well as this year.  She also identified the 2013-2015 strategies of go/get to market with front end and compliance investments; leveraging existing business processes and internal technologies; and establishing best practices.  Of key interest to the audience was a reform era payer solutions platform overview mapping technologies to support the business operations. David Bonham of the Oracle Health Insurance organization moderated the panel and spoke on Oracle’s presence in healthcare and products for payers to help them drive efficiencies and gain a competitive advantage in an ever changing market. Oracle serves healthcare stakeholders with applications such as billing, rating and underwriting, analytics, CRM, enrollment, and products for processing of health insurance claims including pricing and benefits administration, as well as payment of providers through alternative, non-fee for service reimbursement methods. Oracle in Healthcare….Did you know? More than 80 healthcare payers run Oracle applications. More than 300 leading healthcare providers run Oracle applications. 10 out of the top 12 fortune Global 500 healthcare organizations run Oracle applications. For more information on Oracle solutions for healthcare payers, please visit oracle.com/insurance or these individual solution pages: Oracle Health Insurance Components Oracle Insurance Insbridge Rating and Underwriting Oracle Insurance Revenue Management and Billing Oracle Documaker Oracle Healthcare Oracle CRM Related Resources Webcast On Demand: Strategies for Success: Driving Business Transformation in the Growing Health Insurance Exchange Market Strategy Brief: Executing on the Individual Mandate: Opportunities and Challenges for Healthcare Payers White Paper: White paper: Navigating Alternative Provider Reimbursement Models of the Future Strategy Brief: Enterprise Rating Agility Improves Payer Response to Healthcare Reform Podcast: Technology Implications of Healthcare Reform Don’t forget to keep up with us year-round: Facebook: www.facebook.com/oracleinsurance Twitter: www.twitter.com/oracleinsurance YouTube: www.youtube.com/oracleinsurance

    Read the article

  • Silverlight Cream for March 08, 2011 -- #1056

    - by Dave Campbell
    In this Issue: Joost van Schaik, Manas Patnaik, Kevin Hoffman, Jesse Liberty, Deborah Kurata, Dhananjay Kumar, Dennis Delimarsky, Samuel Jack, Peter Kuhn, WindowsPhoneGeek, and Jfo. Above the Fold: Silverlight: "How I let the trees grow" Peter Kuhn WP7: "Simple Windows Phone 7 / Silverlight drag/flick behavior" Joost van Schaik Shoutouts: SilverlightShow has their top 5 from last week posted, plus the ECOContest is ready to be voted on: SilverlightShow for Feb 28 - March 06, 2011 Drew DeVault is a young man involved with the Microsoft Student Insiders. He gave a WP7 presentation at RMTT and has posted his material: Post-Session: Windows Phone 7 @ RMTT Rui Marinho has an app in the ECO Contest called Forest Findr. is based on the BIng Map Control for silverlight and Sql Spatial data, and helps you find Forests and get geolocated pictures and wikipedia information, and has a post up with a bunch of info on it here: Forest Findr. my entry on the SilverlightShow EcoContest From SilverlightCream.com: Simple Windows Phone 7 / Silverlight drag/flick behavior Joost van Schaik has a behavior that makes *anything* draggable and 'flickable' in WP7 ... read the intro, scroll to the bottom to watch the demo, and then grab up the code... cool stuff, Joost! Data Aggregation Using Presentation Model in RIA and Silverlight 4 Manas Patnaik sent me a link to his blog, and it appears he's got lots of Silverlight goodness out there so you'll be hearing more about him. This first post is on the Presentation Model in RIA and Silverlight 4... good discussion, diagrams and code... good job, Manas! WP7 for iPhone and Android Developers - Advanced UI Kevin Hoffman has part 3 of an ambitious 12-part tutorial series up on WP7 development ... this go-around is concentrating on Advanced UI - Panorama/Pivot controls, DataBinding, ObservableCollections, and Converters... whew! Sterling DB on top of Isolated Storage – 2 Jesse Liberty has part 2 of his Sterling series up... this time setting up the database in App.xaml so it can be used for dealing with tombstoning. Silverlight Charting: Formatting the Tick Marks Deborah Kurata's next chart tutorial is all about showing you how to continue to dress up your charts.. this time by formatting the tick marks... if you don't know what that is... check out the first image in the post. Stored Procedure in WCF Data Service Dhananjay Kumar has a very nice tutorial up on using a stored proc with WCF Data Services... I happen to know someone working on just that at this time. If you have this in mind, here's a step-by-step guide to getting it done. Windows Phone 7 – Episode 5 – Pages Dennis Delimarsky has part 5 of his WP7 tutorial series up and is discussing Pages in this 17 minute video. Unpacking Simon Squared: My mini framework-independent animation library Samuel Jack has not only Open-Sourced the WP7 game he built and blogged about, but he's now explaining some of the structure of the game in posts such as this one about the animation library he wrote that his game is built on. How I let the trees grow Peter Kuhn shares with us the code he used for the tree animation in his ECO Contest entry. There's a lot to learn in this post about performance ... the fully-animated tree has about 20K elements... 5K branches and 20K leaves... check it out. WP7 ToastPrompt in depth WindowsPhoneGeek takes a deep dive into the ToastPrompt control in the Coding4fun Toolkit... everything you need to completely use the control including sample code. Beware the loaded event Jfo talks about another frustration point she had with WP7 development, and that is around the use of the loaded event... read these tips from someone that's been there. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Thoughts on Thoughts on TDD

    Brian Harry wrote a post entitled Thoughts on TDD that I thought I was going to let lie, but I find that I need to write a response. I find myself in agreement with Brian on many points in the post, but I disagree with his conclusion. Not surprisingly, I agree with the things that he likes about TDD. Focusing on the usage rather than the implementation is really important, and this is important whether you use TDD or not. And YAGNI was a big theme in my Seven Deadly Sins of Programming series. Now, on to what he doesnt like. He says that he finds it inefficient to have tests that he has to change every time he refactors. Here is where we part company. If you are having to do a lot of test rewriting (say, more than a couple of minutes work to get back to green) *often* when you are refactoring your code, I submit that either you are testing things that you dont need to test (internal details rather than external implementation), your code perhaps isnt as decoupled as it could be, or maybe you need a visit to refactorers anonymous. I also like to refactor like crazy, but as we all know, the huge downside of refactoring is that we often break things. Important things. Subtle things. Which makes refactoring risky. *Unless* we have a set of tests that have great coverage. And TDD (or Example-based Design, which I prefer as a term) gives those to us. Now, I dont know what sort of coverage Brian gets with the unit tests that he writes, but I do know that for the majority of the developers Ive worked with and I count myself in that bucket the coverage of unit tests written afterwards is considerably inferior to the coverage of unit tests that come from TDD. For me, it all comes down to the answer to the following question: How do you ensure that your code works now and will continue to work in the future? Im willing to put up with a little efficiency on the front side to get that benefit later. Its not the writing of the code thats the expensive part, its everything else that comes after. I dont think that stepping through test cases in the debugger gets you what you want. You can verify what the current behavior is, sure, and do it fairly cheaply, but you dont help the guy in the future who doesnt know what conditions were important if he has to change your code. His second part that he doesnt like backing into an architecture (go read to see what he means). Ive certainly had to work with code that was like this before, and its a nightmare the code that nobody wants to touch. But thats not at all the kind of code that you get with TDD, because if youre doing it right youre doing the write a failing tests, make it pass, refactor approach. Now, you may miss some useful refactorings and generalizations for this, but if you do, you can refactor later because you have the tests that make it safe to do so, and your code tends to be easy to refactor because the same things that make code easy to write unit tests for make it easy to refactor. I also think Brian is missing an important point. We arent all as smart as he is. Im reminded a bit of the lesson of Intentional Programming, Charles Simonyis paradigm for making programming easier. I played around with Intentional Programming when it was young, and came to the conclusion that it was a pretty good thing if you were as smart as Simonyi is, but it was pretty much a disaster if you were an average developer. In this case, TDD gives you a way to work your way into a good, flexible, and functional architecture when you dont have somebody of Brians talents to help you out. And thats a good thing.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • DeveloperDeveloperDeveloper! Scotland 2010 - DDDSCOT

    - by Plip
    DDD in Scotland was held on the 8th May 2010 in Glasgow and I was there, not as is uaual at these kind of things as an organiser but actually as a speaker and delegate. The weekend started for me back on Thursday with the arrival of Dave Sussman to my place in Lancashire, after a curry and watching the Electon night TV coverage we retired to our respective beds (yes, I know, I hate to shatter the illusion we both sleep in the same bed wearing matching pijamas is something I've shattered now) ready for the drive up to Glasgow the following afternoon. Before heading up to Glasgow we had to pick up Young Mr Hardy from Wigan then we began the four hour drive back in time... Something that struck me on the journey up is just how beautiful Scotland is. The menacing landscapes bordered with fluffy sheep and whirly-ma-gigs are awe inspiring - well worth driving up if you ever get the chance. Anywho we arrived in Glasgow, got settled intot he hotel and went in search of Speakers for pre conference drinks and food. We discovered a gaggle (I believe that's the collective term) of speakers in the Bar and when we reached critical mass headed off to the Speakers Dinner location. During dinner, SOMEONE set my hair on FIRE. That's all I'm going to say on the matter. Whilst I was enjoying my evening there was something nagging at me, I realised that I should really write my session as I was due to give it the following morning. So after a few more drinks I headed back to the hotel and got some well earned sleep (and washed the fire damage out of my hair). Next day, headed off to the conference which was a lovely stroll through Glasgow City Centre. Non of us got mugged, murdered (or set on fire) arriving safely at the venue, which was a bonus.   I was asked to read out the opening Slides for Barry Carr's session which I did dilligently and with such professionalism that I shocked even myself. At which point I reliased in just over an hour I had to give my presentation, so headed back to the speaker room to finish writing it. Wham, bam and it was all over. Session seemed to go well. I was speaking on Exception Driven Development, which isn't so much a technical solution but rather a mindset around how one should treat exceptions and their code. To be honest, I've not been so nervous giving a session for years - something about this topic worried me, I was concerned I was being too abstract in my thinking or that what I was saying was so obvious that everyone would know it, but it seems to have been well recieved which makes me a happy Speaker. Craig Murphy has some brilliant pictures of DDD Scotland 2010. After my session was done I grabbed some lunch and headed back to the hotel and into town to do some shopping (thus my conspicuous omission from the above photo). Later on we headed out to the geek dinner which again was a rum affair followed by a few drinks and a little boogie woogie. All in all a well run, well attended conference, by the community for the community. I tip my hat to the whole team who put on DDD Scotland!       

    Read the article

  • My Experience at Oracle !!! By Ayush Gupta

    - by Nadiya
    Normal 0 false false false EN-US X-NONE X-NONE Hi! My name is Ayush, a Gratuate from BITS Pilani and now working and living in Bangalore. I joined Oracle in August 2013 as a Senior Consultant (SC) and would like to share my experiences over the first couple of months with you.It has been a wonderful journey so far. The last two months have been very exciting for me. First of all I would like to mention that the training program at Oracle that we went through really prepared us well. It matured us and allowed us to go from developing small applications in college to big enterprise products. Two months of initial training has had a lasting impact for me. I am also really enjoying the knowledge I have gained so far and also learning new things in the form of product training. It's really fun to work here. We are treated like adults and we are responsible for our own workloads.With that I can't keep from mentioning the fun times we as a team have in the form of Young Leadership programme in Hotel Fortune Trinity which included Luxurious buffet lunch too. Wishing it could happen more frequently.  Oracle provides one of the best opportunities to learn various technologies across different platforms. What I like best about working at Oracle is the work life balance. With the option of flexible timings, one can easily enjoy planned evenings with friends or maybe working out at the fitness centre in your building. Be it the birthday celebrations at office or the day long team outing at a resort, It’s all together a different experience. Overall, you get to take full ownership of your project and they give you a free leash on how you design your enhancements/changes.As one of the largest international companies, Oracle is obviously an expert on exploring the potential and possibility of inexperienced new hires. We were taught how to make an outstanding team work in a group training session at the first few weeks. From this experience I realized that perfect cooperation is not about where you come from or what your study background is, everyone can find his or her own role to support the team. Even though I am not that skilled in technology, my background has significantly helped me in learning new technologies in Oracle.My idea and suggestion is: for new joiners, the will to learn is be more important than what you have learnt before. Colleagues here at Oracle are professionals in their field, always friendly and glad to help. So don’t worry, all you need to do is just be confident, and have a nice attitude, Oracle will let you fully display your talent. Come and join us, here you can always find a tailor made role for you! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Graduate Life in Oracle by Ramakrishna Nalabothula

    - by david.talamelli
    Preparation for the BIG interview: I prepared in both technical and logical aspects to face the Oracle Interview. I had to cover almost all main areas in technical and many types of problems in logical areas. We attended mock- interviews and written tests at our college, browsed websites and communities. Having started with such a rigorous preparation before Oracle visited the college; it was possible for me to make it into the list of final selection. I put in a big effort to reach this position and I am very happy to achieve this. Why I chose Oracle: Oracle is one of the best technology providers and has a large customer base. I think it is not an easy job to offer services to that many customers. So, the company needs young and dynamic people and I wanted to be one among them. This gave me spirit and led me to walk into Oracle. I am working on different technologies and learning something new in the field. Having many customers is challenging Oracle and my work is challenging me. I am confident enough that customers to both me and Oracle will never lose their faith. Learning at Oracle: The style of learning is good and never resembles a classroom session in a college. It is always fun to learn here. There is no exam to track the performance. There is enough time until we completely learn it. There is no concept of stiff competition. Peers help through KT (Knowledge Transfers) and there are good resources in the Oracle to learn. People are always there to direct you to those. There are lots of opportunities for Web learning too! My Work Area: My team gives me a great opportunity to offer service to the entire product. There were no situations when I got tense with my work or targets and deliverables. I work with a Global Team and my manager is based in the UK. I have a lot of freedom and flexibility. I use the work from home option in case of any disturbances in the city or due to personal problems. I have a weekly meeting with my manager and use Instant Messenger for status updates. My manager plans very well to give me enough time to complete tasks. I have good coordination from the team towards our deadlines. My work has also brought me close to many people across various technology and product teams. I am glad to make many friends across Oracle. I am enjoying my time and work here. I cover all the major activities in the team. I am thankful to everyone from the Development and Quality Assurance Team to have high confidence in me by assigning such big responsibilities. Primary tasks are maintaining the environments that are very unstable at times. This really requires big time and effort to trace the root causes. I am working and still learning on all these areas. The happiest thing is I got chances to travel to USA & UK for training and for supporting a few customer demo projects. I have got to explore more across two countries and got sponsored to visit the places around due to Oracle's policies. I am very much thankful for these what I have from Oracle and for the cooperation there from other colleagues. Fun at Work: Oracle has a club from Employees to conduct games and events. I had an opportunity to participate in competitions, tournaments inside Oracle and Inter-Corporate for all games. I thank Oracle for providing me all these opportunities and I would like to extend my thanks to Senior Management for their confidence in me. I thank Oracle HR Recruiting Team too for selecting me into Oracle and giving me this opportunity to share my experience and feelings. Ramakrishna Nalabothula

    Read the article

  • Working for free?

    - by Jonny
    I came across this article Work for Free that got me thinking. The goal of every employer is to gain more value from workers than the firm pays out in wages; otherwise, there is no growth, no advance, and no advantage for the employer. Conversely, the goal of every employee should be to contribute more to the firm than he or she receives in wages, and thereby provide a solid rationale for receiving raises and advancement in the firm. I don't need to tell you that the refusenik didn't last long in this job. In contrast, here is a story from last week. My phone rang. It was the employment division of a major university. The man on the phone was inquiring about the performance of a person who did some site work on Mises.org last year. I was able to tell him about a remarkable young man who swung into action during a crisis, and how he worked three 19-hour days, three days in a row, how he learned new software with diligence, how he kept his cool, how he navigated his way with grace and expertise amidst some 80 different third-party plug-ins and databases, how he saw his way around the inevitable problems, how he assumed responsibility for the results, and much more. What I didn't tell the interviewer was that this person did all this without asking for any payment. Did that fact influence my report on his performance? I'm not entirely sure, but the interviewer probably sensed in my voice my sense of awe toward what this person had done for the Mises Institute. The interviewer told me that he had written down 15 different questions to ask me but that I had answered them all already in the course of my monologue, and that he was thrilled to hear all these specifics. The person was offered the job. He had done a very wise thing; he had earned a devotee for life. The harder the economic times, the more employers need to know what they are getting when they hire someone. The job applications pour in by the buckets, all padded with degrees and made to look as impressive as possible. It's all just paper. What matters today is what a person can do for a firm. The resume becomes pro forma but not decisive under these conditions. But for a former boss or manager to rave about you to a potential employer? That's worth everything. What do you think? Has anyone here worked for free? If so, has it benefited you in any way? Why should(nt) you work for free (presuming you have the money from other means to keep you going)? Can you share your experience? Me, I am taking a year out of college and haven't gotten a degree yet so that's probably why most of my job applications are getting ignored. So im thinking about working for free for the experience?

    Read the article

  • Cloud hosted CI for .NET projects

    - by Scott Dorman
    Originally posted on: http://geekswithblogs.net/sdorman/archive/2014/06/02/cloud-hosted-ci-for-.net-projects.aspxContinuous integration (CI) is important. If you don’t have it set up…you should. There are a lot of different options available for hosting your own CI server, but they all require you to maintain your own infrastructure. If you’re a business, that generally isn’t a problem. However, if you have some open source projects hosted, for example on GitHub, there haven’t really been any options. That has changed with the latest release of AppVeyor, which bills itself as “Continuous integration for busy developers.” What’s different about AppVeyor is that it’s a hosted solution. Why is that important? By being a hosted solution, it means that I don’t have to maintain my own infrastructure for a build server. How does that help if you’re hosting an open source project? AppVeyor has a really competitive pricing plan. For an unlimited amount of public repositories, it’s free. That gives you a cloud hosted CI system for all of your GitHub projects for the cost of some time to set them up, which actually isn’t hard to do at all. I have several open source projects (hosted at https://github.com/scottdorman), so I signed up using my GitHub credentials. AppVeyor fully supported my two-factor authentication with GitHub, so I never once had to enter my password for GitHub into AppVeyor. Once it was done, I authorized GitHub and it instantly found all of the repositories I have (both the ones I created and the ones I cloned from elsewhere). You can even add “build badges” to your markdown files in GitHub, so anyone who visits your project can see the status of the lasted build. Out of the box, you can simply select a repository, add the build project, click New Build and wait for the build to complete. You now have a complete CI server running for your project. The best part of this, besides the fact that it “just worked” with almost zero configuration is that you can configure it through a web-based interface which is very streamlined, clean and easy to use or you can use a appveyor.yml file. This means that you can define your CI build process (including any scripts that might need to be run, etc.) in a standard file format (the YAML format) and store it in your repository. The benefits to that are huge. The file becomes a versioned artifact in your source control system, so it can be branched, merged, and is completely transparent to anyone working on the project. By the way, AppVeyor isn’t limited to just GitHub. It currently supports GitHub, BitBucket, Visual Studio Online, and Kiln. I did have a few issues getting one of my projects to build, but the same day I posted the problem to the support forum a fix was deployed, and I had a functioning CI build about 5 minutes after that. Since then, I’ve provided some additional feature requests and had a few other questions, all of which have seen responses within a 24-hour period. I have to say that it’s easily been one of the best customer support experiences I’ve seen in a long time. AppVeyor is still young, so it doesn’t yet have full feature parity with some of the older (more established) CI systems available,  but it’s getting better all the time and I have no doubt that it will quickly catch up to those other CI systems and then pass them. The bottom line, if you’re looking for a good cloud-hosted CI system for your .NET-based projects, look at AppVeyor.

    Read the article

  • Learn Many Languages

    - by Phil Factor
    Around twenty-five years ago, I was trying to solve the problem of recruiting suitable developers for a large business. I visited the local University (it was a Technical College then). My mission was to remind them that we were a large, local employer of technical people and to suggest that, as they were in the business of educating young people for a career in IT, we should work together. I anticipated a harmonious chat where we could suggest to them the idea of mentioning our name to some of their graduates. It didn’t go well. The academic staff displayed a degree of revulsion towards the whole topic of IT in the world of commerce that surprised me; tweed met charcoal-grey, trainers met black shoes. However, their antipathy to commerce was something we could have worked around, since few of their graduates were destined for a career as university lecturers. They asked me what sort of language skills we needed. I tried ducking the invidious task of naming computer languages, since I wanted recruits who were quick to adapt and learn, with a broad understanding of IT, including development methodologies, technologies, and data. However, they pressed the point and I ended up saying that we needed good working knowledge of C and BASIC, though FORTRAN and COBOL were, at the time, still useful. There was a ghastly silence. It was as if I’d recommended the beliefs and practices of the Bogomils of Bulgaria to a gathering of Cardinals. They stared at me severely, like owls, until the head of department broke the silence, informing me in clipped tones that they taught only Modula 2. Now, I wouldn’t blame you if at this point you hurriedly had to look up ‘Modula 2′ on Wikipedia. Based largely on Pascal, it was a specialist language for embedded systems, but I’ve never ever come across it in a commercial business application. Nevertheless, it was an excellent teaching language since it taught modules, scope control, multiprogramming and the advantages of encapsulating a set of related subprograms and data structures. As long as the course also taught how to transfer these skills to other, more useful languages, it was not necessarily a problem. I said as much, but they gleefully retorted that the biggest local employer, a defense contractor specializing in Radar and military technology, used nothing but Modula 2. “Why teach any other programming language when they will be using Modula 2 for all their working lives?” said a complacent lecturer. On hearing this, I made my excuses and left. There could be no meeting of minds. They were providing training in a specific computer language, not an education in IT. Twenty years later, I once more worked nearby and regularly passed the long-deserted ‘brownfield’ site of the erstwhile largest local employer; the end of the cold war had led to lean times for defense contractors. A digger was about to clear the rubble of the long demolished factory along with the accompanying growth of buddleia and thistles, in order to lay the infrastructure for ‘affordable housing’. Modula 2 was a distant memory. Either those employees had short working lives or they’d retrained in other languages. The University, by contrast, was thriving, but I wondered if their erstwhile graduates had ever cursed the narrow specialization of their training in IT, as they struggled with the unexpected variety of their subsequent careers.

    Read the article

  • PASS Summit 2013 Review

    - by Ajarn Mark Caldwell
    As a long-standing member of PASS who lives in the greater Seattle area and has attended about nine of these Summits, let me start out by saying how GREAT it was to go to Charlotte, North Carolina this year.  Many of the new folks that I met at the Summit this year, upon hearing that I was from Seattle, commented that I must have been disappointed to have to travel to the Summit this year after 5 years in a row in Seattle.  Well, nothing could be further from the truth.  I cheered loudly when I first heard that the 2013 Summit would be outside Seattle.  I have many fond memories of trips to Orlando, Florida and Grapevine, Texas for past Summits (missed out on Denver, unfortunately).  And there is a funny dynamic that takes place when the conference is local.  If you do as I have done the last several years and saved my company money by not getting a hotel, but rather just commuting from home, then both family and coworkers tend to act like you’re just on a normal schedule.  For example, I have a young family, and my wife and kids really wanted to still see me come home “after work”, but there are a whole lot of after-hours activities, social events, and great food to be enjoyed at the Summit each year.  Even more so if you really capitalize on the opportunities to meet face-to-face with people you either met at previous summits or have spoken to or heard of, from Twitter, blogs, and forums.  Then there is also the lovely commuting in Seattle traffic from neighboring cities rather than the convenience of just walking across the street from your hotel.  So I’m just saying, there are really nice aspects of having the conference 2500 miles away. Beyond that, the training was fantastic as usual.  The SQL Server community has many outstanding presenters and experts with deep knowledge of the tools who are extremely willing to share all of that with anyone who wants to listen.  The opening video with PASS President Bill Graziano in a NASCAR race turned dream sequence was very well done, and the keynotes, as usual, were great.  This year I was particularly impressed with how well attended were the Professional Development sessions.  Not too many years ago, those were very sparsely attended, but this year, the two that I attended were standing-room only, and these were not tiny rooms.  I would say this is a testament to both the maturity of the attendees realizing how important these topics are to career success, as well as to the ever-increasing skills of the presenters and the program committee for selecting speakers and topics that resonated with people.  If, as is usually the case, you were not able to get to every session that you wanted to because there were just too darn many good ones, I encourage you to get the recordings. Overall, it was a great time as these events always are.  It was wonderful to see old friends and make new ones, and the people of Charlotte did an awesome job hosting the event and letting their hospitality shine (extra kudos to SQLSentry for all they did with the shuttle, maps, and other event sponsorships).  We’re back in Seattle next year (it is a release year, after all) but I would say that with the success of this year’s event, I strongly encourage the Board and PASS HQ to firmly reestablish the location rotation schedule.  I’ll even go so far as to suggest standardizing on an alternating Seattle – Charlotte schedule, or something like that. If you missed the Summit this year, start saving now, and register early, so you can join us!

    Read the article

  • Mobile Deals: the Consumer Wants You in Their Pocket

    - by Mike Stiles
    Mobile deals offer something we talk about a lot in social marketing, relevant content. If a consumer is already predisposed to liking your product and gets a timely deal for it that’s easy and convenient to use, not only do you score on the marketing side, it clearly generates some of that precious ROI that’s being demanded of social. First, a quick gut-check on the public’s adoption of mobile. Nielsen figures have 55.5% of US mobile owners using smartphones. If young people are indeed the future, you can count on the move to mobile exploding exponentially. Teens are the fastest growing segment of smartphone users, and 58% of them have one. But the largest demographic of smartphone users is 25-34 at 74%. That tells you a focus on mobile will yield great results now, and even better results straight ahead. So we can tell both from statistics and from all the faces around you that are buried in their smartphones this is where consumers are. But are they looking at you? Do you have a valid reason why they should? Everybody likes a good deal. BIA/Kelsey says US consumers will spend $3.6 billion this year for daily deals (the Groupons and LivingSocials of the world), up 87% from 2011. The report goes on to say over 26% of small businesses are either "very likely" or "extremely likely" to offer up a deal in the next 6 months. Retail Gazette reports 58% of consumers shop with coupons, a 40% increase in 4 years. When you consider that a deal can be the impetus for a real-world transaction, a first-time visit to a store, an online purchase, entry into a loyalty program, a social referral, a new fan or follower, etc., that 26% figure shows us there’s a lot of opportunity being left on the table by brands. The existing and emerging technologies behind mobile devices make the benefits of offering deals listed above possible. Take how mobile payment systems are being tied into deal delivery and loyalty programs. If it’s really easy to use a coupon or deal, it’ll get used. If it’s complicated, it’ll be passed over as “not worth it.” When you can pay with your mobile via technologies that connects store and user, you get the deal, you get the loyalty credit, you pay, and your receipt is uploaded, all in one easy swipe. Nothing to keep track of, nothing to lose or forget about. And the store “knows” you, so future offers will be based on your tastes. Consider the endgame. A customer who’s a fan of your belt buckle store’s Facebook Page is in one of your physical retail locations. They pull up your app, because they’ve gotten used to a loyalty deal being offered when they go to your store. Voila. A 10% discount active for the next 30 minutes. Maybe the app also surfaces social references to your brand made by friends so they can check out a buckle someone’s raving about. If they aren’t a fan of your Page or don’t have your app, perhaps they’ve opted into location-based deal services so you can still get them that 10% deal while they’re in the store. Or maybe they’ve walked in with a pre-purchased Groupon or Living Social voucher. They pay with one swipe, and you’ve learned about their buying preferences, credited their loyalty account and can encourage them to share a pic of their new buckle on social. Happy customer. Happy belt buckle company. All because the brand was willing to use the tech that’s available to meet consumers where they are, incentivize them, and show them how much they’re valued through rewards.

    Read the article

  • What Counts for a DBA: Skill

    - by drsql
    “Practice makes perfect:” right? Well, not exactly. The reality of it all is that this saying is an untrustworthy aphorism. I discovered this in my “younger” days when I was a passionate tennis player, practicing and playing 20+ hours a week. No matter what my passion level was, without some serious coaching (and perhaps a change in dietary habits), my skill level was never going to rise to a level where I could make any money at the sport that involved something other than selling tennis balls at a sporting goods store. My game may have improved with all that practice but I had too many bad practices to overcome. Practice by itself merely reinforces what we know and what we can figure out naturally. The truth is actually closer to the expression used by Vince Lombardi: “Perfect practice makes perfect.” So how do you get to become skilled as a DBA if practice alone isn’t sufficient? Hit the Internet and start searching for SQL training and you can find 100 different sites. There are also hundreds of blogs, magazines, books, conferences both onsite and virtual. But then how do you know who is good? Unfortunately often the worst guide can be to find out the experience level of the writer. Some of the best DBAs are frighteningly young, and some got their start back when databases were stored on stacks of paper with little holes in it. As a programmer, is it really so hard to understand normalization? Set based theory? Query optimization? Indexing and performance tuning? The biggest barrier often is previous knowledge, particularly programming skills cultivated before you get started with SQL. In the world of technology, it is pretty rare that a fresh programmer will gravitate to database programming. Database programming is very unsexy work, because without a UI all you have are a bunch of text strings that you could never impress anyone with. Newbies spend most of their time building UIs or apps with procedural code in C# or VB scoring obvious interesting wins. Making matters worse is that SQL programming requires mastery of a much different toolset than most any mainstream programming skill. Instead of controlling everything yourself, most of the really difficult work is done by the internals of the engine (written by other non-relational programmers…we just can’t get away from them.) So is there a golden road to achieving a high skill level? Sadly, with tennis, I am pretty sure I’ll never discover it. However, with programming it seems to boil down to practice in applying the appropriate techniques for whatever type of programming you are doing. Can a C# programmer build a great database? As long as they don’t treat SQL like C#, absolutely. Same goes for a DBA writing C# code. None of this stuff is rocket science, as long as you learn to understand that different types of programming require different skill sets and you as a programmer must recognize the difference between one of the procedural languages and SQL and treat them differently. Skill comes from practicing doing things the right way and making “right” a habit.

    Read the article

  • Software and/(x)or Hardware Projects for Pre-School Kids

    - by haylem
    I offered to participate at my kid's pre-school for various activities (yes, I'm crazy like that), and one of them is to help them discover extra-curricular (big word for a pre-school, but by lack of a better one... :)) hobbies, which may or may not relate to a professional activity. At first I thought that it wouldn't be really easy to have pre-schoolers relate to programming or the internal workings of a computer system in general (and I'm more used to teaching middle-school to university-level students), but then I thought there must be a way. So I'm trying to figure out ways to introduce very young kids (3yo) to computer systems in a fun and preferably educational way. Of course, I don't expect them to start smashing the stack for fun and profit right away (or at least not voluntarily, though I could use the occasion for some toddler tests...), but I'm confident there must be ways to get them interested in both: using the systems, becoming curious about understanding what they do, interacting with the systems to modify them. I guess this setting is not really relevant after all, it's pretty much the same as if you were aiming to achieve the same for your own kids at home. Ideas Considering we're talking 3yo pre-schoolers here, and that at this age some kids are already quite confident using a mouse (some even a keyboard, if not for typing, at least to press some buttons they've come to associate with actions) while others have not yet had any interaction with computers of any kind, it needs to be: rather basic, demonstrated and played with in less then 5 or 10 minutes, doable in in groups or alone, scalable and extendable in complexity to accommodate their varying abilities. The obvious options are: basic smallish games to play with, interactive systems like LOGO, Kojo, Squeak and clones (possibly even simpler than that), or thngs like Lego Systems. I guess it can be a thing to reflect on both at the software and the hardware levels: it could be done with a desktop or laptop machine, a tablet, a smartphone (or a crap-phone, for that matter, as long as you can modify it), or even get down to building something from scratch (Raspberry Pi and Arduino being popular options at the moment). I can probably be in the form of games, funny visualizations (which are pretty much games) w/ Prototype, virtual worlds to explore. I also thought on the moment (and I hope this won't offend anyone) that some approaches to teaching pets could work (reward systems, haptic feedback and such things could quickly point a kid in the right direction to understanding how things work, in a similar fashion - I'm not suggesting to shock the kids!). Hmm, Is There an Actual Question in There? What type of systems do you think might be a good fit, both in terms of hardware and software? Do you have seen such systems, or have anything in mind to work on? Are you aware of some research in this domain, with tangible results? Any input is welcome. It's not that I don't see options: there are tons, but I have a harder time pinpointing a more concrete and definite type of project/activity, so I figure some have valuable ideas or existing ones. Note: I am not advocating that every kid should learn to program, be interested in computer systems, or that all of them in a class would even care enough to follow such an introduction with more than a blank stare. I don't buy into the "everybody would benefit from learning to program" thing. Wouldn't hurt, but not necessary in any way. But if I can walk out of there with a few of them having smiled using the thing (or heck, cried because others took them away from them), that'd be good enough. Related Questions I've seen and that seem to complement what I'm looking for, but not exactly for the same age groups or with the same goals: Teaching Programming to Kids Recommendations for teaching kids math concepts & skills for programming?

    Read the article

  • iPhone: How to write plist array of dictionary object

    - by Alessandro
    Hello, I'm a young Italian developer for the iPhone. I have a plist file (named "Frase") with this structure: Root Array - Item 0 Dictionary Frase String Preferito Bool - Item 1 Dictionary Frase String Preferito Bool - Item 2 Dictionary Frase String Preferito Bool - Item 3 Dictionary Frase String Preferito Bool exc. An array that contains many elements dictionary, all the same, consisting of "Frase" (string) and "Preferito" (BOOL). The variable "indirizzo", increase or decrease the click of the button Next or Back. The application interface: http://img691.imageshack.us/img691/357/schermata20100418a20331.png When I click on AddPreferito button, the item "Preferito" must be YES. Subsequently, the array must be updated with the new dictionary.The code: (void)addpreferito:(id)sender { NSString *plistPath = [[NSBundle mainBundle] pathForResource:@"Frase" ofType:@"plist"]; MSMutableArray *frase = [[NSMutableArray alloc] initWithContentsOfFile:plistPath]; NSMutableDictionary *dictionary = [frase objectAtIndex:indirizzo]; [dictionary setValue: YES forKey:@"Preferito"]; [frase replaceObjectAtIndex:indirizzo withObject:dictionary]; [frase writeToFile:plistPath atomically:YES]; } Why not work? Thanks Thanks Thanks!

    Read the article

  • Open source Java CMS for Google App Engine?

    - by markvgti
    I am looking for an open source Java CMS (Web CMS, actually) to run on Google App Engine. I have looked at related older questions on this topic (What CMS runs on Google AppEngine?, CMS over Google App Engine, with SEO etc.) but the problem is that they all largely list Python-based CMSes. Plus these questions are pretty old, and since GAE is a fast-moving target, I thought it might be worthwhile to ask again. I want a CMS for creating some websites (for myself and for others), but would rather not start writing one from scratch. A "good" (very subjective, I know) open source WCMS allows me to start using a product, while still being able to add to/extend the product/project. On the one hand I am looking for a somewhat mature product/project, on the other hand it's easier to start contributing to the development cycle of a young product/project (conflicting, I know :-). Here are some features that would be preferable: [X]HTML/XML/CSS based templating Ability to create multiple blogs Galleries Ability to create a "Downloads" section (is this pretty much standard?) Separate management for digital assets (images, PDFs, binary files etc.) Roles like "Administrator", "Editor", "Contributor" etc. (or their equivalents) Ability to move/reorganize pages Export to PDF Reformat content for printing Is the CMS you are about to suggest especially well-suited to publishing an online book? My idea is that while the book may be offered as a downloadable eBook, the latest, most current version will be the one available on the website.

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29  | Next Page >