Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 25/314 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• How do I connect my Windows XP laptop to the internet?

  - by rubysiddhi

  Hello fellow super users, The Past I have a Acer Travelmate 2300 laptop running Windows XP. 6 months ago I moved into a new apartment and got a new internet connection set up. After getting an internet connection installed in my apartment I reinstalled Windows XP and at the same time wiped my drive clean losing all the original Acer software and drivers. Once XP was reinstalled I had to find all the drivers again to get the Travelmate laptop connected to the internet. So, using my Vista laptop which was connected fine, I went to the Acer Travelmate Series drivers download page to download the necessary drivers. I transferred them to my Acer XP machine and installed them the best I could (there were no easy instructions so I just had to find all the executables and run them). I eventually got connected to the internet but not exactly in the way I had hoped for. The Present To be connected to the internet I need to have an Ethernet cord connecting my computer (via the Ethernet port) to my router. This is a problem since it defeats the purpose of having a Wireless LAN card in my Acer laptop. One of the programs I downloaded from the Acer Travelmate Series page was the Acer Wireless LAN Configuration Utility. This program allows me to see the current network I am connected to and all the available networks I could potentially connect to. It reminds me of XP's Wireless Network Connection window/utility where you can see all available wireless networks, refresh the network list and connect to one of the networks. I should mention that my ISP set up a security enabled wireless network with WPA. This network requires a network key if you want to connect to it. I guess my Vista computer has the network key entered into it already. The problem is that I do not know what the network key is. Now obviously you would say just contact my ISP to get the key. And I will but there is just one extra weird issue. I am able to connect to another unsecured wireless network in the Wireless Network Connection window/utility. I can be on it as long as my Ethernet cable is plugged in. So this is not really wireless is it? And this indicates that even if I do get that network key password from my ISP, I will only solve one of the two problems I have. I will only solve being able to get online as long as I am connected to my router via the Ethernet cable. The Main Questions So how do I enable my acer IPN2220 Wireless LAN Card so that I can use my Acer laptop from anywhere with in my apartment? Or should I first get the network key from my ISP to access my security enabled wireless network? And then deal with getting the acer IPN2220 Wireless LAN Card working? Hard & Learned VS Easy & Stupid Of course contacting the ISP would be easier. Have em just come in here and do there thing. The problem with that is that they do not speak English (yeah, im in Poland) and it'd be a hell of a time trying to understand what they are doing (uncomfortable looking over their shoulder). Also, I want to learn how to do this task myself so that I can fix the problem if it ever happens again. You know, be more self sufficient. I look forward to helpful replies. Thanks, Xaviour

  Read the article

• How To Disconnect Non-Mapped UNC Path “Drives” in Windows

  - by The Geek

  Have you ever browsed over to another PC on your network using “network neighborhood”, and then connected to one of the file shares? Without a drive letter, how do you disconnect yourself once you’ve done so? Really confused as to what I’m talking about? Let’s walk through the process. First, imagine that you browse through and connect to a share, entering your username and password to gain access. The problem is that you stay connected, and there’s no visible way to disconnect yourself. If you try and shut down the other PC, you’ll receive a message that users are still connected. So let’s disconnect! Open up a command prompt, and then type in the following: net use This will give you a list of the connected drives, including the ones that aren’t actually mapped to a drive letter. To disconnect one of the connections, you can use the following command: net use /delete \\server\sharename For example, in this instance we’d disconnect like so: net use /delete \\192.168.1.205\root$ Now when you run the “net use” command again, you’ll see that you’ve been properly disconnected. If you wanted to actually connect to a share without mapping a drive letter, you can do the following: net use /user:Username \\server\sharename Password You could then just pop \\server\sharename into a Windows Explorer window and browse the files that way. Note that this technique should work exactly the same in any version of windows. Similar Articles Productive Geek Tips Remove "Map Network Drive" Menu Item from Windows Vista or XPDisable the Annoying "This page has an unspecified potential security risk" When Using Files on a Network ShareCopy Path of a File to the Clipboard in Windows 7 or VistaMap a Network Drive from XP to Windows 7Defrag Multiple Hard Drives At Once In Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily

  Read the article

• How to setup Dual Head with "radeon" driver for R770?

  - by user1709408

  I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

  Read the article

• Loose component cables causing HDMI video problems

  - by jwir3

  I'm not sure this is the correct forum, but I'll ask anyway. I have an A/V setup at home that has something like the following: Five Components (actually a few more, like a CD player, but they don't really relate to this question): Older Pioneer Receiver Digital Set Top Box Sony BluRay Player Samsung Plasma TV Speakers The reason for the receiver is so that all the sound can go through the speakers, rather than some going to the TV speakers and some to the external speakers. They are connected as follows: Digital Set Top Box connects via component video to Samsung TV directly via Component 2 (audio goes to Older Pioneer Receiver). Sony BluRay player is connected via HDMI 1 to TV, but audio goes to the receiver. Now, the problem I'm having is that when I have the digital set top box connected, there are times when the Netflix or Hulu streams I watch through the Sony BluRay player (it's connected to a router for internet access) will lose video. What I mean by this is that the sound of the episode will keep playing, but the screen will go black. If I jiggle the component cables, it will often come back. If I disconnect the component cables, it will always come back. I've noticed that one of the connections (the red component cable) doesn't like to sit very well in the component socket in the back of the digital set top box. It seems like there is a bad connection here, but it doesn't seem like this should be affecting the HDMI input at all. What I've noticed, though, is that when I disconnect the digital set top box completely (i.e. remove the component cable from the back of the TV), the problem seems to resolve itself. I'm not talking about actually removing the cable physically, because I thought perhaps the cables were mashing against one another, and possibly jiggling each other loose. To correct this possible problem, I took the component cable completely out of the cable ties it was in in the back of my entertainment center, as well as pulled the digital set top box out from the entertainment center altogether. It's now connected directly to the TV, without any other cables touching it to cause some kind of weird interference or just physical pulling on the cable. Same problem. If, however, I disconnect the component cable and just leave it sitting behind the TV, then the problem goes away. So, my question is this - what could be causing this? Is it a case where it's an improperly shielded component cable that's causing interference with the HDMI input, or something that's wrong with the TV? It's an intermittent problem, so it's difficult to track down. The TV isn't that old, so it's probably still under warranty. I'm just wondering if there is something else I can do that might reduce this problem without having to haul a massive television set out of my house to get repaired/replaced.

  Read the article

• Is there apt-cacher for Windows?

  - by Ted Kim

  I have two computers. C1: Windows with Internet connection. C2: Ubuntu connected with C1 but not connected with Internet. I'd like to access apt repositories to update or install some packages on Ubuntu. I heard, apt-cacher is one of solutions, but I couldn't find apt-cacher for Windows (It is only one, I have, with Internet connection). Please let me know how to do. Thanks in advance Ted Kim

  Read the article

• Cannot connect to the Internet

  - by Pratap

  My desktop has Broadband wired connection - shows connected, but unable to load any web page in Ubuntu 12.04 but works fine with Windows 7. My laptop - wireless connection shows connected, but again does not load any web page. Please help. On running sudo dhclient eth1 on my laptop there is no result - see the screen output:prajna@LAPTOP:~$ sudo dhclient eth1 [sudo] password for prajna: prajna@LAPTOP:~$ sudo dhclient eth1 [sudo] password for prajna: after giving password - some time later the screen comes back to prajna@LAPTOP:~$

  Read the article

• Openconnect problems on Ubuntu 12.04

  - by Fendrix

  Getting problems on the Ubuntu 11.04 for openconnect... the failure after connecting says: Got CONNECT response: HTTP/1.1 200 OK CSTP connected. DPD 30, Keepalive 20 Connected tun0 as 172.21.246.21, using SSL DTLS handshake failed: 2 I thought it is a kernel fault so I updated to 12.04 which didn't change the message. It could be that the vpnc-script has the problem. Is there any workaround for this issue ? I already got the vpnc package and downloaded the /etc/vpnc/vpnc-script

  Read the article

• ubiquity "hangs" on first step

  - by bumbling fool

  Trying to install 11.04 daily for the last couple days but, no matter what I try (wifi connected, wifi not connected, disk blank, disk prepartitioned...), if just "hangs" at the first window (pick your language) with a non-stop hourglass after hitting next. I ran into a different issue when trying to use the alternate installer image. This is on a Stinkpad T42. Should ubiquity at least tell me whats going on?!? I tried to find a log but /var/log/installer* isn't present.

  Read the article

• Misaligned Display on Resume

  - by Shaun Killingbeck

  I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Picasa 3.9 login fails with 2-factor authentication

  - by Paul Pomes

  I've installed Picasa 3.9 via the instructions at webupd8, however the login window keeps failing with the message, "You must be connected to the Internet to use this feature." If "Try again" is tried I'll successfully pass the first login screen of username and password. Next I'm prompted for the verification code which then takes me back to the "You must be connected to the Internet to use this feature" screen again.

  Read the article

• Exadata X3 Expandability Update

  - by Bandari Huang

  Exadata Database Machine X3-2 Data Sheet New 10/29/2012 Up to 18 racks can be connected without requiring additional InfiniBand switches. Exadata Database Machine X3-8 Data Sheet New 10/24/2012 Scale by connecting multiple Exadata Database Machine X3-8 racks or Exadata Storage Expansion Racks. Up to 18 racks can be connected by simply connecting via InfiniBand cables. Larger configurations can be built with additional InfiniBand switches.  

  Read the article

• USB 3.0 controller is not recognized by Ubuntu 12.04

  - by BlueWanderer

  I have a Thinkpad E430 notebook, and the intel's USB 3.0 controller can not be recognized by Ubuntu 12.04. The LED on my USB-HDD is white instead of blue (And in Windows 7, it is blue when connected to USB 3.0 port, and is white when connected to 2.0). And the transfer speed is around 25MB/s instead of 65MB/s in Windows 7. I'm not familiar with Linux systems, so I've no clue about what's going wrong. I've searched the web, but got no solution.

  Read the article

• Dual Frame Buffer on Ubuntu 12.04 Intel HD Graphics 4600 i7-4770

  - by user3692512

  I have 2 monitors connected to the PC, one in HDMI, one in DVI. I have Intel integrated graphics HD4600 Now as far my understanding, both the monitors is connected at the same framebuffer /dev/fb0 How can I detach them and create 2 frame buffers at startup, so that I can directly write to the second monitor, by writing on the /dev/fb1, and not hamper the /dev/fb0, so that x-server can run normally on that?

  Read the article

• How to make Windows 7 use the internet connection that I specify

  - by user138957

  I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

  Read the article

• Looking for an algorithm to connect dots - shortest route

  - by e4ch

  I have written a program to solve a special puzzle, but now I'm kind of stuck at the following problem: I have about 3200 points/nodes/dots. Each of these points is connected to a few other points (usually 2-5, theoretical limit is 1-26). I have exactly one starting point and about 30 exit points (probably all of the exit points are connected to each other). Many of these 3200 points are probably not connected to neither start nor end point in any way, like a separate net, but all points are connected to at least one other point. I need to find the shortest number of hops to go from entry to exit. There is no distance between the points (unlike the road or train routing problem), just the number of hops counts. I need to find all solutions with the shortest number of hops, and not just one solution, but all. And potentially also solutions with one more hop etc. I expect to have a solution with about 30-50 hops to go from start to exit. I already tried: 1) randomly trying possibilities and just starting over when the count was bigger than a previous solution. I got first solution with 3500 hops, then it got down to about 97 after some minutes, but looking at the solutions I saw problems like unnecessary loops and stuff, so I tried to optimize a bit (like not going back where it came from etc.). More optimizations are possible, but this random thing doesn't find all best solutions or takes too long. 2) Recursively run through all ways from start (chess-problem-like) and breaking the try when it reached a previous point. This was looping at about a length of 120 nodes, so it tries chains that are (probably) by far too long. If we calculate 4 possibilities and 120 nodes, we're reaching 1.7E72 possibilities, which is not possible to calculate through. This is called Depth-first search (DFS) as I found out in the meantime. Maybe I should try Breadth-first search by adding some queue? The connections between the points are actually moves you can make in the game and the points are how the game looks like after you made the move. What would be the algorithm to use for this problem? I'm using C#.NET, but the language shouldn't matter.

  Read the article

• USB 3.0 controller is not recognized

  - by BlueWanderer

  I have a Thinkpad E430 notebook, and the intel's USB 3.0 controller can not be recognized by Ubuntu 12.04. The LED on my USB-HDD is white instead of blue (And in Windows 7, it is blue when connected to USB 3.0 port, and is white when connected to 2.0). And the transfer speed is around 25MB/s instead of 65MB/s in Windows 7. I'm not familiar with Linux systems, so I've no clue about what's going wrong. I've searched the web, but got no solution.

  Read the article

• Why is user "lightdm" trying to log into my SBS 2003?

  - by user652740

  I have 7 Ubuntu desktops connected to a SBS 2003 using Centrify. I have a rather weird scenario, whereby a user with the name lightdm is trying to log into our server, possibly automatically. I thought lightdm was the session manager, not a user? Does anybody know what could be causing this? There is no user: "lightdm" on the server and the problem only comes from one of the 7 internal desktops connected to the server (its IP address is in the local network).

  Read the article

• error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)

  - by ArunS

  Hello there, We have online shopping site. When I am going to checkout page i am getting a error like this "error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)" From the apache error log i can see some attempts to connect to api.paypal.com. Here is the part of my apache error log About to connect() to api.paypal.com port 443 (#0) Trying 66.211.168.123... * connected Connected to api.paypal.com (66.211.168.123) port 443 (#0) successfully set certificate verify locations: CAfile: none CApath: /etc/ssl/certs error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure Closing connection #0 When i tried to connect to api.paypal.com using curl i am getting a error like this curl -iv https://api.paypal.com/ * About to connect() to api.paypal.com port 443 (#0) * Trying 66.211.168.91... connected * Connected to api.paypal.com (66.211.168.91) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Request CERT (13): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS alert, Server hello (2): * error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure * Closing connection #0 curl: (35) error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure Can anyone help me to figure out this. Thanks in Advance. Arun S

  Read the article

• How can I close a port that appears to be orphaned by Xvfb?

  - by Jim Fiorato

  I'm running Xvfb on a FC8 Amazon EC2 image. On occasion Xvfb will crash (unable at the moment to find out the reason for the crash), and after crashing the TCP port will appear to be orphaned. I'm unable to get a PID to kill any process that may be using it. I'm starting Xvfb with: Xvfb :7 -screen 0 1024x768x24 & Examples of what I'm working with are below, the Xvfb port is (was) 6007: # netstat -ap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1894/sshd tcp 0 0 *:6007 *:* LISTEN - tcp 0 352 ip-10-84-69-165.ec2.int:ssh c-71-194-253-238.hsd1:51689 ESTABLISHED 2981/0 udp 0 0 *:bootpc *:* 1817/dhclient udp 0 0 *:bootpc *:* 1463/dhclient Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ] DGRAM 871 668/udevd @/org/kernel/udev/udevd unix 2 [ ACC ] STREAM LISTENING 5385 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 6 [ ] DGRAM 5353 1867/rsyslogd /dev/log unix 2 [ ] DGRAM 11861 2981/0 unix 2 [ ] DGRAM 5461 1974/crond unix 2 [ ] DGRAM 5451 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5438 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5437 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5396 1880/dbus-daemon unix 3 [ ] STREAM CONNECTED 5395 1880/dbus-daemon unix 2 [ ] DGRAM 5361 1871/rklogd # lsof -i COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dhclient 1463 root 3u IPv4 4704 UDP *:bootpc dhclient 1817 root 4u IPv4 5173 UDP *:bootpc sshd 1894 root 3u IPv4 5414 TCP *:ssh (LISTEN) sshd 2981 root 3u IPv4 11825 TCP ip-10-84-69-165.ec2.internal:ssh->c-71-194-253-238.hsd1.il.comcast.net:51689 (ESTABLISHED) Attempting to force the port closed with iptables doesn't seem to work either. iptables -A INPUT -p tcp --dport 6007 -j DROP I'm at a loss as to how to reclaim/free the port. From what I can tell, this port will remain in this state until the EC2 instance is shut down. So, how can I close this port so I can restart Xvfb?

  Read the article

• Gluster bricks are offline and errors in logs

  - by Roman Newaza

  I have substituted all the IP addresses with hostnames and renamed configs (IP to hostname) in /var/lib/glusterd by my shell script. After that I restarted Gluster Daemon and the volume. Then I checked if all the peers are connected: root@GlusterNode1a:~# gluster peer status Number of Peers: 3 Hostname: gluster-1b Uuid: 47f469e2-907a-4518-b6a4-f44878761fd2 State: Peer in Cluster (Connected) Hostname: gluster-2b Uuid: dc3a3ff7-9e30-44ac-9d15-00f9dab4d8b9 State: Peer in Cluster (Connected) Hostname: gluster-2a Uuid: 72405811-15a0-456b-86bb-1589058ff89b State: Peer in Cluster (Connected) I could see mounted volumes size change on all the nodes when I execute df command, so new data is coming. But recently I noticed error messages in app log: copy(/storage/152627/dat): failed to open stream: Structure needs cleaning readfile(/storage/1438227/dat): failed to open stream: Input/output error unlink(/storage/189457/23/dat): No such file or directory Finally, I have found out some bricks are offline: root@GlusterNode1a:~# gluster volume status Status of volume: storage Gluster process Port Online Pid ------------------------------------------------------------------------------ Brick gluster-1a:/storage/1a 24009 Y 1326 Brick gluster-1b:/storage/1b 24009 N N/A Brick gluster-2a:/storage/2a 24009 N N/A Brick gluster-2b:/storage/2b 24009 N N/A Brick gluster-1a:/storage/3a 24011 Y 1332 Brick gluster-1b:/storage/3b 24011 N N/A Brick gluster-2a:/storage/4a 24011 N N/A Brick gluster-2b:/storage/4b 24011 N N/A NFS Server on localhost 38467 Y 24670 Self-heal Daemon on localhost N/A Y 24676 NFS Server on gluster-2b 38467 Y 4339 Self-heal Daemon on gluster-2b N/A Y 4345 NFS Server on gluster-2a 38467 Y 1392 Self-heal Daemon on gluster-2a N/A Y 1402 NFS Server on gluster-1b 38467 Y 2435 Self-heal Daemon on gluster-1b N/A Y 2441 What can I do about that? I need to fix it. Note: CPU and Network usage of all the four nodes are about the same.

  Read the article

• Cannot set up dual monitors correctly in Fedora15 with KDE.

  - by adivasile

  I have 2 monitors: 24" LCD connected via DVI(primary) 19" LCD connected via VGA(secondary) Everytime Fedora starts the second display is always set to clone the first one and they both run at 1280x1024 and I always have to disable the 19" monitor, in order for the bigger one to run at 1920x1080. I want to set them up so that my secondary monitor extends the primary one.The problem is that no matter what kind of configuration I choose it has no effect.My secondary monitor remains disabled. I've tried using both the Display manager from KDE and the ATI Control Panel and the behaviour is always the same.The moment I click apply, the screen flickers and nothing changes. I've succesfully used the extended setup in Fedora15 with Gnome3. I have a RadeonHD 4300 series videocard and I'm using the drivers downloaded from the AMD site. This is the output of xrandr -q : Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920 VGA-0 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.0 70.1 66.0 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 60.0 1680x1050 59.9 1600x900 60.0 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1280x720 60.0 1152x720 60.0 1024x768 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 Later edit: The problem seems to come from the ATI drivers.I managed to set up the monitors like I wanted after I uninstalled the drivers. Unfortunately I'm working on an OpenCL project so I had to reinstall them.The moment I did that, all my previous settings were forgotten and I was back to square one.

  Read the article

• MySQL Cluster ndb_mgmd error

  - by Patryk

  I set up MySQL Cluster on Ubuntu. My ndb_mgmd.cnf file looked: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.30 Now I want to edit this configuration, so I changed this file: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.25 [MYSQLD] NodeId=5 HostName=192.168.204.26 But ndb_mgm > show; still shows: Connected to Management Server at: localhost:1186 Cluster Configuration --------------------- [ndbd(NDB)] 2 node(s) id=2 (not connected, accepting connect from 192.168.204.25) id=3 (not connected, accepting connect from 192.168.204.26) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.204.20 (mysql-5.1.51 ndb-7.1.9) [mysqld(API)] 1 node(s) id=4 (not connected, accepting connect from 192.168.204.30) I tried: sudo /etc/init.d/mysql-ndb-mgm restart sudo ndb_mgmd --initial sudo ndb_mgmd -f /etc/mysql/ndb_mgmd.cnf And nothing works. Any help?

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)

  - by ArunS

  We have online shopping site. When I am going to checkout page i am getting a error like this "error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)" From the apache error log i can see some attempts to connect to api.paypal.com. Here is the part of my apache error log * About to connect() to api.paypal.com port 443 (#0) * Trying 66.211.168.123... * connected * Connected to api.paypal.com (66.211.168.123) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure * Closing connection #0 When i tried to connect to api.paypal.com using curl i am getting a error like this curl -iv https://api.paypal.com/ * About to connect() to api.paypal.com port 443 (#0) * Trying 66.211.168.91... connected * Connected to api.paypal.com (66.211.168.91) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Request CERT (13): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS alert, Server hello (2): * error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure * Closing connection #0 curl: (35) error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure Can anyone help me to figure out this. Thanks in Advance. Arun S

  Read the article

• Internet Connection not working - USB LAN connection - from particular modem

  - by Paul

  I am trying to fix Internet connection on a friends Dell inspiron 1720 with XP service pack 3. It has an integrated network card that stopped working, after powering down/up the modem still didnt work I brought it back to my place to try a few things ie check cable, update driver etc... still didnt work. So I bought a USB LAN connector. It didnt work straight away but I went to configure the properties and changed the ConnectionType from AutoSense to 100 BaseT 10BaseT Full_Duplex, I basically just tried them all. From my place when connected to my desktop - 10 BaseT and 10BaseT Full_Duplex worked. From my place When connected to their laptop - 10 BaseT and 10BaseT Full_Duplex worked. Happy I went back to my friends house confident it would all work, and it didnt. Brought it back to mine and it did. While there, in Network Connections the connection is there recognized, enabled, 'working properly' it just says not connected. Also there is no led on the USB connector While at mine as above except there is an led on the USB connector and it says connected. Other difference I can think of is they have a cable modem, I'm plugged into the back of a Belkin wireless router - would this make a difference? Any other ideas what to try? (Would getting the model of the cable modem help anyone?) The USB connector is "DM9601 USB to Fast Ethernet"

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >