Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 30/314 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10?

  - by Kendall Gifford

  I'd like to move from windows with my current workstation. The only thing holding me back is that I have 3 monitors connected to the system and I really take advantage of the real estate when working. I just installed Ubuntu 10.10 on the system and one of the monitors is up and running just fine. This monitor is connected to the built-in Intel adapter. I also have two old nVidia GeForce4 MX 4000 (nv19pl) cards in my two PCI slots with two monitors connected to them respectively. I installed the legacy (and proprietary) nVidia drivers (the nvidia-96 package) that claims to support these old cards. Now the question is how to get X configured to use all adapters (using two different drivers) so I can use all three monitors (and is this even possible)? From what I've read, it looks like I'll have to write an xorg.conf file since the nVidia driver doesn't support the auto-magic configuration supported by other drivers. On this site: http://wiki.ubuntu.com/X/Config it says that on 10.10 I just need to write an xorg.conf "containing only those sections and options that you need to override Xorg's autoconfigurated settings". So, does this mean I can get away with only including the nVidia-specific configuration stuff and all else will get auto-configured? Or, will providing a config with a "Device" section overrule the auto-magic from detecting/using the Intel adapter? I ran the included nvidia-xconfig to generate a basic, nVidia-specific xorg.conf but I'm hesitant to reboot with it in place, suspecting I'll have a screwed up display. Also, is there any way (any tool or command) to generate an xorg.conf from the current, auto-configured running state of an X session? If I have to write a full, complete config, I'd rather start with one that includes everything that's been auto-detected thus far (and merge it with my nVidia version). Anyhow, any info and thoughts are greatly appreciated (as are answers).

  Read the article

• Cannot FTP without simultaneous SSH connection?

  - by Lucas

  I'm trying to set up an old box as a backup server (running 10.04.4 LTS). I intend to use 3rd party software on my PC to periodically connect to my server via FTP(S) and to mirror certain files. For some reason, all FTP connection attempts fail UNLESS I'm simultaneously connected via SSH. For example, if I use putty to test the connection to port 21, the system hangs and times out. I get: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] <cursor> However, when I'm simultaneously logged in (in another session) everything works: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] 230 Login successful. Basically, this means that my software will never be able to connect on its own, as intended. I know that the correct port is open because it works (sometimes) and nmap gives me: Starting Nmap 5.00 ( http://nmap.org ) at 2012-03-20 16:15 CDT Interesting ports on xx.xxx.xx.x: Not shown: 995 closed ports PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 53/tcp open domain 139/tcp open netbios-ssn 445/tcp open microsoft-ds Nmap done: 1 IP address (1 host up) scanned in 0.15 seconds My only hypothesis is that this has something to do with iptables. Maybe it's allowing only established connections? I don't think that's how I set it up, but maybe? Here's my iptables rules for INPUT: lucas@rearden:~$ sudo iptables -L INPUT Chain INPUT (policy DROP) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ufw-before-logging-input all -- anywhere anywhere ufw-before-input all -- anywhere anywhere ufw-after-input all -- anywhere anywhere ufw-after-logging-input all -- anywhere anywhere ufw-reject-input all -- anywhere anywhere ufw-track-input all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:ftp I'm using vsftpd. Any thoughts/resources on how I could fix this? L

  Read the article

• DSL connection not working in 10.04

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• Will Your Brand Survive the Age of Digital Darwinism?

  - by Christie Flanagan

  It’s the end of business as usual.  Trends such as the mobile web, social media, gamification and real-time are forcing businesses to rethink the way they operate.  At the same time, people are embracing a new digital culture across ever expanding networks.  Together, these trends have given rise to a new breed of connected consumer, one that is ready to shake the very foundation of business today.  This is the age of Digital Darwinism – where society and technology evolve faster than your ability to adapt.  How well poised is your brand to survive and thrive in this new environment? Attend this webcast to hear Altimeter Group digital analyst and futurist, Brian Solis, discuss the rise of connected consumerism and learn how brands can survive Digital Darwinism by better understanding customer expectations, disruptive technology, and the new opportunities that arise from them. You will learn: How brands are being redefined in the digital consumer landscape and what they can do to create and steer these experiences Why consumer influence is growing and how businesses can use this to their advantage How to connect with a rising audience through new touchpoints between consumers, brands, and influencers Why you need to create a culture of change to earn trust, influence and significance among today’s connected customers Register now.

  Read the article

• Using USB to Ethernet with Linux Ubuntu 12.04

  - by Sriram

  Being a newbie, Please excuse if the technical Jargon used is not an universally accepted one :) I have a particular device (say device A) whose USB2.0 driver is available from Linux community. Linux UBUNTU12.04 based PC is able to detect that device via the available driver. My requirement is to ensure that PC can exchange the command as well as data with the device A over TCP/IP packets (In other words, instead of just a USB Based driver, there should be a TCP/IP wrapper over the device USB driver and still does the same job as the USB driver was doing before) Bought an USB (Female) to RJ-45 adapter,connected Device A (male) USB to the USB Female end of the adapter and the Ethernet end connected to the router. PC also is connected to the same router so that both Device A and the PC have the IP address in the same subnet range. So the packets produced by the device A can be routed to the PC via some binding( not sure how I can achieve this, but conceptual idea) Here are the issues I can see as of now 1) USB to RJ-45 is just a hardware signal conversion and not a NIC in itself and hence no MAC/IP ADDRESS assigned. Can we bind a virtual NIC created in PC with this connector? 2) Any available USB TO IP command as well as data translation wrappers available? e.g. command for the device A on Ethernet converted to command for the device A on USB which is then acted upon the device as a command from the USB driver There is some missing link in my understanding and hence it would be of great help if you can bounce off some ideas on how I can take this forward so that Device A and PC exchange data over IP. Thanks and Regards, Sriram

  Read the article

• Getting Xbox Live via a wired network with my laptop that has internet access wirelessly

  - by Alex Franco

  I'm running the latest version (as of yesterday anyways) of Ubuntu Desktop 64bit, but installed on my laptop if it makes a difference. I had Windows 7 preinstalled when i bought it and it worked fine with the wireless from my house and bridging the connection with a LAN to my xbox for Live. Now with Ubuntu I tried the same setup, but I'm unfamiliar with Ubuntu so I didn't get far. Best I got so far is wireless internet on my laptop and a wired connection to the xbox that continually connects and disconnects. Heres my network settings. if theres fields not included its because theyre empty on mine or theyre my MAC address or network password Wireless Network 1 settings: Connect Automatically: Checked. Available to all Users: Checked Wireless: SSID: Franco's Mode: Infrastructure MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Wired Network 1: Connect Automatically: Checked Available to all Users: Checked Wired: MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Any help would be greatly appreciated. EDIT: 6:26pm It seems to be staying connected now. Doing the Network test on my xbox it pickups the network, but cannot detect any PC. Restarting the Xbox, however, leaves my computer unable to connect bringing up the Wire Network disconnected 'blip' every minute or so again. Before I had restarted the Xbox it said "Connected 100 MB/s". Now it only says "connecting". I did have my computer and xbox on in this Wired Network Disconnected blip cycle for a long period of time so it may have finally connected, just without the ability to detect my laptop. I left for 2 hours or so in the middle of typing up the original question. I finished posting this when i got back and then tried to mess with it a bit again, in case youre wondering why i didnt include this before... I've said too much. Forgive my long-winded fingers :p

  Read the article

• Platformer Enemy AI

  - by hayer

  I'm currently developing a platformer shooter. The game is multiplayer and while my net code could use some real work I have put that off for the time, so currently I'm trying to implement the AI. The game is pretty simple; Players run around on a map filled with a X amount of zombies that try to eat their brains, classic and overused I know. Weapons spawn at random intervals around the map. The problem is that the zombies, when they find their pray the have to follow it for some while.. And here is the problem, running the AI navcode seems to take for ever. So here is the ideas I have come up with so far Have the AI update at different intervals with a maximum of Y ms with no updates. Have the zombies assigned to groups of zombies. One is appointed the leader of the group who finds the way to the player - the rest just follows the leader. If the leader dies another one of the zombies in the group is appointed president of the zombie swarm. If there is less than five zombies in a group they try to meet up with other zombies.(Aka they are assigned to a different group and therefor a new leader) Multi-threading option one or two? For navigation I have some kinda navmesh(since the game is not tile-based) that tells the zombies where they can walk etc. If anyone else got some ideas on how to do navigation I would love some input. For LoS(zombie - player) I have split the map into grids. If the players grid is connected to the zombies grid(if I go with option two I would only need to check if leader zombies grid is connected to player, aka less checks) - if they are connected and there is more than 250ms since last check do a raytrace.. This is my first time programming AI so input on any field is appreciated.

  Read the article

• can ping, but not SSH

  - by Matt

  So I have NetworkManager, connected to an AP on wlan1. I have wlan0 connected to a AdHoc network. I have Firestarter sharing my inet on the Adhoc. I have my ipod connected to wlan0, IP 10.42.43.101. wlan0 Link encap:Ethernet HWaddr ac:xx:12:81:7f:xx inet addr:10.42.43.1 Bcast:10.255.255.255 Mask:255.0.0.0 wlan1 Link encap:Ethernet HWaddr 00:xx:b3:98:f2:xx inet addr:10.0.1.61 Bcast:10.0.1.255 Mask:255.255.255.0 Now, I can ping my Jailbroken, SSH-enabled and running ipod touch: matt: ~ $ ping 10.42.43.101 PING 10.42.43.101 (10.42.43.101) 56(84) bytes of data. 64 bytes from 10.42.43.101: icmp_req=1 ttl=64 time=168 ms 64 bytes from 10.42.43.101: icmp_req=2 ttl=64 time=256 ms 64 bytes from 10.42.43.101: icmp_req=3 ttl=64 time=151 ms ^C --- 10.42.43.101 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 151.465/191.979/256.316/46.003 But I cannot SSH it: $ ssh [email protected] -vv OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.42.43.101 [10.42.43.101] port 22. It just stays there till I ^C it.. Here's my routing: $ ip route show 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 2 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 319 169.254.0.0/16 dev vboxnet0 proto kernel scope link src 169.254.128.223 metric 204 10.0.0.0/8 dev wlan0 proto kernel scope link src 10.42.43.1 default via 10.0.1.1 dev wlan1 proto static default via 10.0.1.1 dev wlan1 metric 319

  Read the article

• Clustering in GlassFish with DCOM on Windows 7

  - by ByronNevins

  I've discovered that Windows 7 makes it very difficult to use DCOM and, mainly, the GlassFish clustering commands that rely on DCOM.  I spent a few days trying to solve the problems.  I don't yet have a cookbook for making DCOM work on Windows 7.  But here are a few tips and advice I've found. run asadmin setup-local-dcom -- It now comes automatically with the open source GlassFish 4.  It will write some critical registry entries for you.  run asadmin validate-dcom to test dcom 3.   When I ran validate-dcom on my Windows 7 network I saw the problem below: Successfully resolved host name to: gloin/10.28.51.10 Successfully connected to DCOM Port at port 135 on host gloin. Successfully connected to NetBIOS Session Service at port 139 on host gloin.Successfully connected to Windows Shares at port 445 on host gloin.Can not access the remote file system.  Is UAC on? : Access is denied. I discovered the actual problem is that Windows 7 no longer has the "C$" Administrative file share available by default. If "C$" isn't available then nothing will work. Here is how to expose the "C$" share: Registry Change -- this change allows “C$” to be accessed.  As soon as I set it -- the file copying started working!  [1] regkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System create this key, 32 bit word, with value == 1 LocalAccountTokenFilterPolicy 4.  Turn on the Remote Registry Service -- This is critical and it's easy to do. Windows 7 has it turned off by default. MyComputer-right click, manage, services, then turn on Remote Registry Service and set it to start automatically in the fture. 5. Turn off UAC: %systemroot%\system32\UserAccountControlSettings.exe 6. This is where I discovered that McAfee virus scanner blocks all the NetBios shares!  It has to be disabled.  

  Read the article

• Upgrade won't allow second display to go to 1920x1080

  - by Rick

  I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

  Read the article

• Mouse click events are delayed when moving the cursor in xubuntu 12.04

  - by bobbaluba

  I am trying out live xubuntu on my samsung n150 (netbook, similar to eeepc). So far everything seems perfect, except for this one thing. When I am clicking the mouse while moving the cursour, the click event is delayed. This is extremely annoying when i try to to move windows, because i end up clicking the window behind the window i am trying to move and thereby changing focus. This goes for all applications. I.e selecting text is difficult. There is no lag in the cursor movement, just the click event. The click event is registered with the new mouse position, not the one when the mouse was clicked. I tried searching for the problem, but all the other cases where either kind of different, or had no solution. EDIT: After testing some more, here are some more information. The click doesn't occur until i stop moving the cursor. If I move the cursor smoothly around, the click never gets through. I have ubuntu netbook remix 10.04 installed, and have no problems with the mouse there. EDIT2: Once I connected a usb-mouse, the problem dissappeared. Dragging now works perfectly with both the track pad and the usb mouse. I will update once I have installed xubuntu and figured out if this is a persistant problem. EDIT3: I have installed, and the problem is still there. It dissappears when I have a second mouse connected however, and after I resume from suspend. My solution for now, is just to keep the dongle connected all the time.

  Read the article

• Just installed 13.04 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.04 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• Looking for someone to point me in the right direction. I want to learn how to use hosted servers

  - by Leisure

  TL;DR: I want a Java program to run on a server, I want the server to forward a particular port from external to internal IP, I want store a few files on the server. Guides please. So I made a hack job Java program that acts as a server for my android application. It stores data in text files and HTML files, uploads them via FTP to my webhost, and manages socket connections (using port forwarding) with any phones connected. Right now I'm running it on NetBeans on my home computer. I know that it will probably slow down or crash once about 50 phones are connected at once. Is there any way I can run this program on a server with a high bandwidth? Can someone please find me a guide for that? I'm noob and don't know where to start looking. I seriously don't know anything about renting or using servers - I need a nice guide, and recommendations. My requirements for the server: Can handle about 2k socket connections at once Can run my Java code and store my txt files Can give me a port and an IP address so TCP/IP clients can be connected My budget: $50 CAD per month. Please someone set my ship sailing in the right direction, I really don't know where to look for resources.

  Read the article

• Oracle Java Embedded Client 1.1 Released

  - by Roger Brinkley

  Yesterday an update release of Oracle Java Embedded Client (OJEC) 1.1 quietly slipped out door for general availability. Until last year it was pretty difficult to get your hands on either a Connected Limited Device Configuration (CLDC) for small devices or a Connected Device Configuration (CDC) for medium devices java implementation without a substantial initial commitment. But with the the release of OJWC (CLDC) and OJEC (CDC) last year that has changed. OJEC 1.1 is a binary distribution designed for installation on medium configurations which is a mid range processor requiring a  slow startup time, seamless upgrades, in a cost sensitive hardware environment  anywhere from 3.5mb to 8 mb. There are headless as well as headed versions available. It is intended for devices, such as Blu-­-ray Disc players, set-­-top boxes, residential gateways,VOIP phones, and similar. From a software point of view, OJEC is the Java runtime platform implementation of Connected Device Configuration (CDC v1.1, JSR-­-218), Foundation Profile (FP v1.1, JSR-­-219), and Personal Basis Profile (PBP v1.1, JSR-­-217)  and includes optional packages RMI (JSR 66), JDBC (JSR 169) and XML API for Java ME (JSR 280), and Java TV (JSR-­-927). New to this release is support for the XML API (JSR 280) and a number of bug fixes and performance enhancements, including an improved Just-in-Time (JIT) compilation for the x86 chipset architecture. The platforms supported include ArmV5, ArmV6/ArmV7, MIPS 32 74K, and X86 in headless mode. For embedded developers there are number of advantages to using Java and if you have shied away from the JavaME edition in the past I would encourage you to look into the updated version of OJEC 1.1.

  Read the article

• Turning a problem into a data

  - by Fogmeister

  OK, I have an app that I'm creating but I'm just really not sure about how to approach the problem. The idea is fairly simple. I'm just not sure how to wrap it in a data model (or even if I should). TBH I feel like I'm making it more complicated than it needs to be. How it works. The app will have circles along the top in a row that need to be connected to circles along the bottom in a row. 10 circles at the top. 10 at the bottom. One connection per pair of dots. Anyway, I can get the dots to connect I'm just not sure how to wrap it in a data model so that I can analyse what has been connected and see if it is right or not. The circles will be questions and answers. I can make an array of question objects with a question and answer properties. I can then display these as the dot pairs. I'm just not sure how to record which questions have been connected to which answers. It is valid for a user to connect a wrong answer as they all get checked at the end. I was thinking of using SpriteKit but this isn't a restriction. I could use UIKit or something else. TBH, this question is fairly language free as I'm just after a way of modelling it.

  Read the article

• Automatically revert to laptop screen when external monitor unplugged

  - by Ryan

  I regularly use an external monitor with my laptop, so when I use it, I usually have the laptop screen disabled when the monitor is connected, and this seems to cause problems when the monitor is disconnected. If the monitor is connected while the laptop screen is disabled, I can't get the X session to show up at all: I can Ctrl+Alt+F1 to open a terminal, and that works fine.. ..but Ctrl+Alt+F7 does nothing. The display is blank, and stays blank. The same thing happens whether I put the computer to sleep with the monitor connected, or if I disconnect while the computer is still awake. Rebooting the computer fixes the issue, as does killing Xorg and starting it again, but both of those are sub-optimal since I lose my current session. I'm currently using the open source graphics driver (xserver-xorg-video-ati). This question looks like it might answer my question, but unfortunately hwinfo is no longer available in the apt repository. Is there a way with current tools to automatically detect when the external monitor is disconnected and switch to the laptop display?

  Read the article

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• How to force Multiple Monitors correct resolutions for LightDM?

  - by Hanynowsky

  I am affected by the BUG: https://bugs.launchpad.net/ubuntu/+source/unity-greeter/+bug/874241 Otherwise, if like me you have a laptop connected to a second monitor of higher resolution, LIGHTDM at the login stage, mirrors the displays in both screens and assign to them a common resolution (1024X768) in my case, instead of extending the desktop (Primary screen with the greeter and secondary with just a logo as mentioned in the Multiple Monitors UX specifications book for 12.04). Here is my xrandr -q @L502X:~$ xrandr -q Screen 0: minimum 320 x 200, current 1920 x 1848, maximum 8192 x 8192 LVDS1 connected 1366x768+309+1080 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm 1920x1080 60.0*+ 1600x1200 60.0 1680x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1280x800 59.8 1024x768 60.0 800x600 60.3 56.2 640x480 60.0 DP1 disconnected (normal left inverted right x axis y axis) I tried to force lightdm to execute some xrandr commands in order to set the right resolution for each monitor and extend the desktop, but I get a LOW GRAPHICS MODE ERROR (You're running in low graphics mode, your screen, input devices...did not get detected..) I created a simple script named lightdmxrand.sh: #!/bin/sh xrandr --output HDMI1 --primary --mode 1920x1080 --output LVDS1 --mode 1366x768 --below HDMI1 And told lightdm to run it : /etc/lightdm/lightdm.conf [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu greeter-setup-script=/usr/bin/numlockx on display-setup-script=/home/hanynowsky/lightdmxrandr.sh Someone knows what is wrong!? Thanks in advance.

  Read the article

• Second Monitor Detected, but not receiving a signal after upgrading to 12.04

  - by user62458

  After I upgraded to 12.04, my second monitor is detected (in display settings), but will not power on. I have scoured the Internet and forums for a solution and I can't find anything. I have found a couple people with the same problem, but never a solution for it. I am no expert, but I'm certainly not a noob. My computer uses AMD Radeon 6250 graphics, but I do NOT want to use the proprietary graphics drivers. They refuse to work properly with my second monitor (they ATI drivers will only mirror screens, and I've done everything to try to fix it, and I DON't want mirrored screens) Not to mention that the default open-source video drivers seem to work much better than the proprietary anyway! Again, Ubuntu's default video drivers work fine, and they even DETECT the second monitor (Dell 19'). I can drag stuff off the screen and put it on the 'space' of the second monitor and even a screen-shot shows that there are two monitors active; but the monitor is OFF. It will not power on. It goes into 'power-save' mode because it is not receiving a signal. For some reason it is not getting the signal to power on, even though Ubuntu thinks the monitor is working properly. I had this working fine on my Sony VAIO yesterday (with Radeon graphics/default Ubuntu video drivers). I upgraded to a Samsung Series 3 and now I have this issue. I can't for the life of me figure out why the monitor is connected, detected and I have screen space for the monitor, but the screen won't turn on! XRANDR Output: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected (normal left inverted right x axis y axis) 1440x900 59.9 + 75.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 60.1*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 HDMI-0 disconnected (normal left inverted right x axis y axis)

  Read the article

• Just installed 13.10 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.10 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• python Socket.IO client for sending broadcast messages to TornadIO2 server

  - by Alp

  I am building a realtime web application. I want to be able to send broadcast messages from the server-side implementation of my python application. Here is the setup: socketio.js on the client-side TornadIO2 server as Socket.IO server python on the server-side (Django framework) I can succesfully send socket.io messages from the client to the server. The server handles these and can send a response. In the following i will describe how i did that. Current Setup and Code First, we need to define a Connection which handles socket.io events: class BaseConnection(tornadio2.SocketConnection): def on_message(self, message): pass # will be run if client uses socket.emit('connect', username) @event def connect(self, username): # send answer to client which will be handled by socket.on('log', function) self.emit('log', 'hello ' + username) Starting the server is done by a Django management custom method: class Command(BaseCommand): args = '' help = 'Starts the TornadIO2 server for handling socket.io connections' def handle(self, *args, **kwargs): autoreload.main(self.run, args, kwargs) def run(self, *args, **kwargs): port = settings.SOCKETIO_PORT router = tornadio2.TornadioRouter(BaseConnection) application = tornado.web.Application( router.urls, socket_io_port = port ) print 'Starting socket.io server on port %s' % port server = SocketServer(application) Very well, the server runs now. Let's add the client code: <script type="text/javascript"> var sio = io.connect('localhost:9000'); sio.on('connect', function(data) { console.log('connected'); sio.emit('connect', '{{ user.username }}'); }); sio.on('log', function(data) { console.log("log: " + data); }); </script> Obviously, {{ user.username }} will be replaced by the username of the currently logged in user, in this example the username is "alp". Now, every time the page gets refreshed, the console output is: connected log: hello alp Therefore, invoking messages and sending responses works. But now comes the tricky part. Problems The response "hello alp" is sent only to the invoker of the socket.io message. I want to broadcast a message to all connected clients, so that they can be informed in realtime if a new user joins the party (for example in a chat application). So, here are my questions: How can i send a broadcast message to all connected clients? How can i send a broadcast message to multiple connected clients that are subscribed on a specific channel? How can i send a broadcast message anywhere in my python code (outside of the BaseConnection class)? Would this require some sort of Socket.IO client for python or is this builtin with TornadIO2? All these broadcasts should be done in a reliable way, so i guess websockets are the best choice. But i am open to all good solutions.

  Read the article

• Broadcast receiver, check status, turning off connection with F8

  - by yoann

  I am using eclipse with android sdk 3.2 I have some problems to make my broadcast receiver working when the connection is lost. first I have checked the type of network to make sure I understand well : ConnectivityManager manager = (ConnectivityManager) getSystemService(CONNECTIVITY_SERVICE); boolean is3g = manager.getNetworkInfo( ConnectivityManager.TYPE_MOBILE) .isConnectedOrConnecting(); boolean isWifi = manager.getNetworkInfo( ConnectivityManager.TYPE_WIFI) .isConnectedOrConnecting(); NetworkInfo info = manager.getActiveNetworkInfo(); if (info != null) Toast.makeText(getApplicationContext(), info.getTypeName(), Toast.LENGTH_LONG).show(); else Toast.makeText(getApplicationContext(), "Pas de connexion", Toast.LENGTH_LONG).show(); if (!is3g) Log.i("Network Listener", "DISCONNECTED"); else Log.i("Network Listener", "CONNECTED"); == this is a mobile network, I'm connected Then I press F8 or I make : telnet localhost 5554 gsm data off to stop the connection Here is my dynamic broadcast receiver in an activity : public class ActivityA extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.query); this.registerReceiver(this.networkStateReceiver, new IntentFilter( ConnectivityManager.CONNECTIVITY_ACTION)); } BroadcastReceiver networkStateReceiver = new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { ConnectivityManager connMgr = (ConnectivityManager) context .getSystemService(Context.CONNECTIVITY_SERVICE); NetworkInfo networkInfo = connMgr.getActiveNetworkInfo(); //i have tried several things : State networkState = networkInfo.getState(); // if (networkState.compareTo(State.DISCONNECTED) == 0) ... if (networkInfo != null && networkInfo.isConnected()) { Toast.makeText(getApplicationContext(), "CONNECTED", Toast.LENGTH_LONG).show(); Log.i("Network Listener", "Connected"); } else { Toast.makeText(getApplicationContext(), "DISCONNECTED", Toast.LENGTH_LONG).show(); Log.i("Network Listener", "Network Type Changed"); Intent offline = new Intent(AccountInfoActivity.this, OfflineWorkService.class); startService(offline); } }; My manifest : <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE"/> The problem is : when the activityA is launched, my broadcast receive something and it displays "Connected"(Log) and my toast. When I turn off the connection manually, nothing happend. My service is not started, log message are not displayed, only toast messages work ... And even better, when I turn on the connection again (by pressing F8), I test again the type of connection, Toast messages are shown but this time Log messages don't work. Problems happend when I press F8. Anyway, I think I miss something with broadcast receivers, it's not totally clear. Please help me.

  Read the article

• xrandr shows two displays (LVDS1), but how can I use VGA1 only?

  - by Tom Fishman

  We're running Ubuntu 11 on this hardware: Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone There is no integrated display (it is a barebone box). I connected an external VGA to it. However xrandr shows two displays: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 60.0 1280x1024 76.0 75.0 72.0 60.0 1440x900 75.0 59.9 1152x864 75.0 1024x768 75.1 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 But I don't have two displays. How can I get rid of LVDS1 and use only VGA1? The direct result is that I'm seeing a 1024x768 resolution on my VGA display, because the OS is using "mirror" mode which uses the lower resolution of the two. Turning off the mirror is not a solution. I want to fix it. Related logs: ... [ 20.019] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.019] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.019] (==) intel(0): RGB weight 888 [ 20.019] (==) intel(0): Default visual is TrueColor [ 20.019] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 20.019] (--) intel(0): Chipset: "Pineview G" [ 20.019] (**) intel(0): Relaxed fencing enabled [ 20.019] (**) intel(0): Wait on SwapBuffers? enabled [ 20.019] (**) intel(0): Triple buffering? enabled [ 20.019] (**) intel(0): Framebuffer tiled [ 20.019] (**) intel(0): Pixmaps tiled [ 20.020] (**) intel(0): 3D buffers tiled [ 20.020] (**) intel(0): SwapBuffers wait enabled [ 20.020] (==) intel(0): video overlay key set to 0x101fe [ 20.020] (II) intel(0): Output LVDS1 has no monitor section [ 20.020] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 20.080] (II) intel(0): Output VGA1 has no monitor section [ 20.080] (II) intel(0): EDID for output LVDS1 [ 20.081] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) ... [ 20.082] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.082] (II) intel(0): Printing probed modes for output LVDS1 [ 20.082] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.082] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.149] (II) intel(0): EDID for output VGA1 [ 20.149] (II) intel(0): Manufacturer: BNQ Model: 771b Serial#: 6595 [ 20.149] (II) intel(0): Year: 2008 Week: 16 [ 20.149] (II) intel(0): EDID Version: 1.3 [ 20.149] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V ... [ 20.152] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.152] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 20.152] (II) intel(0): Output LVDS1 connected [ 20.152] (II) intel(0): Output VGA1 connected [ 20.152] (II) intel(0): Using exact sizes for initial modes [ 20.152] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 20.152] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 20.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. ...

  Read the article

• The enterprise vendor con - connecting SSD's using SATA 2 (3Gbits) thus limiting there performance

  - by tonyrogerson

  When comparing SSD against Hard drive performance it really makes me cross when folk think comparing an array of SSD running on 3GBits/sec to hard drives running on 6GBits/second is somehow valid. In a paper from DELL (http://www.dell.com/downloads/global/products/pvaul/en/PowerEdge-PowerVaultH800-CacheCade-final.pdf) on increasing database performance using the DELL PERC H800 with Solid State Drives they compare four SSD drives connected at 3Gbits/sec against ten 10Krpm drives connected at 6Gbits [Tony slaps forehead while shouting DOH!]. It is true in the case of hard drives it probably doesn’t make much difference 3Gbit or 6Gbit because SAS and SATA are both end to end protocols rather than shared bus architecture like SCSI, so the hard drive doesn’t share bandwidth and probably can’t get near the 600MiBytes/second throughput that 6Gbit gives unless you are doing contiguous reads, in my own tests on a single 15Krpm SAS disk using IOMeter (8 worker threads, queue depth of 16 with a stripe size of 64KiB, an 8KiB transfer size on a drive formatted with an allocation size of 8KiB for a 100% sequential read test) I only get 347MiBytes per second sustained throughput at an average latency of 2.87ms per IO equating to 44.5K IOps, ok, if that was 3GBits it would be less – around 280MiBytes per second, oh, but wait a minute [...fingers tap desk] You’ll struggle to find in the commodity space an SSD that doesn’t have the SATA 3 (6GBits) interface, SSD’s are fast not only low latency and high IOps but they also offer a very large sustained transfer rate, consider the OCZ Agility 3 it so happens that in my masters dissertation I did the same test but on a difference box, I got 374MiBytes per second at an average latency of 2.67ms per IO equating to 47.9K IOps – cost of an 240GB Agility 3 is £174.24 (http://www.scan.co.uk/products/240gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-500mb-s-85k-iops), but that same drive set in a box connected with SATA 2 (3Gbits) would only yield around 280MiBytes per second thus losing almost 100MiBytes per second throughput and a ton of IOps too. So why the hell are “enterprise” vendors still only connecting SSD’s at 3GBits? Well, my conspiracy states that they have no interest in you moving to SSD because they’ll lose so much money, the argument that they use SATA 2 doesn’t wash, SATA 3 has been out for some time now and all the commodity stuff you buy uses it now. Consider the cost, not in terms of price per GB but price per IOps, SSD absolutely thrash Hard Drives on that, it was true that the opposite was also true that Hard Drives thrashed SSD’s on price per GB, but is that true now, I’m not so sure – a 300GByte 2.5” 15Krpm SAS drive costs £329.76 ex VAT (http://www.scan.co.uk/products/300gb-seagate-st9300653ss-savvio-15k3-25-hdd-sas-6gb-s-15000rpm-64mb-cache-27ms) which equates to £1.09 per GB compared to a 480GB OCZ Agility 3 costing £422.10 ex VAT (http://www.scan.co.uk/products/480gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-410mb-s-30k-iops) which equates to £0.88 per GB. Ok, I compared an “enterprise” hard drive with a “commodity” SSD, ok, so things get a little more complicated here, most “enterprise” SSD’s are SLC and most commodity are MLC, SLC gives more performance and wear, I’ll talk about that another day. For now though, don’t get sucked in by vendor marketing, SATA 2 (3Gbit) just doesn’t cut it, SSD need 6Gbit to breath and even that SSD’s are pushing. Alas, SSD’s are connected using SATA so all the controllers I’ve seen thus far from HP and DELL only do SATA 2 – deliberate? Well, I’ll let you decide on that one.

  Read the article

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >