Search Results

Search found 1080 results on 44 pages for 'connectivity'.

Page 25/44 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Internet printing : print to iOS gateway -> AirPrint / something -> Laser printers

  - by user75129

  I've done a bit of research on the Internet, and it looks like I'm on a dead end. My goal is to minimize cost, and be able to send and print documents AUTOMATICALLY (may be 10 or 20 pages per day) to a laser printer in a remote office. The preliminary method is to use: iOS 5.1.1 (JB'ed) with 3G connection, HP (or other brands) printer with AirPrint, iCloud's Documents and may be write some launchd scripts to monitor any new documents in iCloud. May be with other software. I am not sure yet. By using the cloud, I can upload new docs to the cloud anywhere in my city, and the iOS will be able to see them within a reasonable amount of time, then print it. But it seems this combo is not workable. Anyone got any advice on how to make this set up work, or propose other alternatives that requires NO PC or Mac? Currently I have a 3GS with 3G connectivity spare. Need to buy a new printer though.

  Read the article

• Does a single LACP channel over multiple switches increase redundancy?

  - by Sirch

  I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

  Read the article

• Windows 7 with two network cards doesn't route traffic

  - by Tomek

  I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

  Read the article

• Standalone server setup for compute capacity

  - by mikera

  I'm developing an application for my company that will require a lot of compute capacity (running some very big mathematical calculations), and looking for some form of server setup to do this. For various reasons, we want to run this on-site in our office rather than hosting it externally. It's been a while since I last had to set up my own servers so I thought I would tap into the collective wisdom of serverfault! My broad requirements are: Budget $30-50k, with an aim to get as much compute capacity as possible for that budget 64-bit servers suitable to run Ubuntu Linux + Java Some relatively standalone rack that can be installed in secure office space Fast/low latency network connections between the servers, but don't really care about connectivity to the outside world Storage capacity shared between the servers - they don't necessarily need their own storage providing they can be booted from a common image Downtime can be tolerated (since the calculations are run in batch mode) The software itself is fault-tolerant, so there is no need for extra resiliency in the server setup (cheap replaceable commodity parts will be fine in general) Given these requirements what kind of setup would you recommend and why?

  Read the article

• Get ipv6 static address teredo

  - by galets

  I have a server behind NAT, which I want to be able to access from the internet. I want to do it over ipv6. I guess my question falls into two: I don't think teredo is working on it. I have ethernet adapter ipv6 set to automatic, however I don't think there connectivity is there. So, how do I enable teredo to get a publicly accessible ipv6 address? Is it possible to claim a static address in teredo, so that every time I connect the address stays the same?

  Read the article

• Debian crashed, file system is read-only and cannot backup - How Do I find/mount a USB drive?

  - by Spiros

  We have a Debian server (vm's) here at work and the server crashed after a power failure. I can only boot the system in maintenance mode, and the whole file system is set to read only. I can run fsck though maintenance mode, however I would like to get a backup of some files before I do. Problem: I cannot access the net since there is no network connectivity in maintenance mode, and for some reason I try to add a USB flash drive to the computer but I can't find it through the console. Question: how to you find/mount a usb drive on Debian? I have tried several resources from the internet but nothing worked. Is there any other way I could get a backup of my files? I cannot start networking since the filesystem is set to read only. Any help would be appreciated.

  Read the article

• How to allow simple file sharing on Windows Server 2008R2 through VPN

  - by Martin Wiboe

  We are a small, distributed company with a Windows Server 2008R2 installation. I would like to set up a way for our employees to connect securely to this server via VPN and then be able to map a network drive. I have gotten this to work somewhat by installing the Network Policy and Access Services Role on the server and using the default settings. I have also created a network share on the server. The problem is that our connectivity is sporadic (sometimes the service stops listening on the port or simply refuses to authorize correct credentials) and slow. I can always connect through VPN, but mapping is problematic. I would be grateful for the answer on how to accomplish this as well as some guidance on whether I am on the right track. Thanks in advance!

  Read the article

• Automatically reboot Windows8 if no internet activity

  - by GrapeCamel

  I have a media server located in a very inconvenient part of my house. Occasionally I will have to reset my router or it will reset itself. The issue is the PC loses connectivity for some reason, and I am forced to walk outside, around the house, into the basement, over a bunch of toys and weights and boxes, to push a button to reboot it. I would love to have it check itself every 5-10 minutes and auto reboot if it is unable to ping a given address/IP. Any ideas how to accomplish this?

  Read the article

• HP Virtual Connect and VLAN Tagging

  - by JaapL

  We have a c7000 chasis with the ability to have 8 uplinks per ESX host. Only 6 are currenlty active. I have a Virtual Switch with multiple vlan port groups and all the VMs are working fine. Recently we've been asked to setup network load balancing for one of our VMs, so we had our Virtual Connect engineer activate the last two uplinks. We then created a new vSwitch and added the two new uplinks to this vSwitch. We then moved the VM to this new vSwitch, but we get no connectivity. What could be the issue? We also added the appropriate VLAN ID. The VConnect engineer says everything is configured correctly and networking TEAM says the appropriate trunking is setup, so we are at a loss...

  Read the article

• How to log Windows server share connections?

  - by sbussinger

  Can anyone make a suggestion for the best way to log connections and disconnections from Windows workstations to a Windows Server 2003 file share? We're having some issues with workstations that have a drive mapped to a server that seem to work fine for awhile and then suddenly appear to get disconnected from the server (with files open). Needless to say this causes some data corruption and error messages. It would help me to troubleshoot the problem if we could somehow monitor and log the session connections and disconnections, to attempt to correlate the connectivity issues with what actions the user is taking at the time and what the server is doing. I just haven't been able to find a way to do this. Specifically I'm talking about the same information that is displayed in the Computer Management control panel applet in the "System Tools|Shared Folders|Sessions" page. Thanks!

  Read the article

• OOF (Out of Office) is not working for remote users (Outlook Anywhere)

  - by Doughecka

  I'm not sure how long this issue has been happening, but recently a few of the remote sales users were going to a sales meeting and wanted to set their Out of Office... however in Outlook 2010, they get this error message: "Your automatic reply settings cannot be displayed because the server is currently unavailable" When I run the Exchange Remote Connectivity Analyzer, Autodiscover completes fine, but the next step fails: Exception details: Message: The request failed. The remote server returned an error: (403) Forbidden. Type: Microsoft.Exchange.WebServices.Data.ServiceRequestException Stack trace: at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request) at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute() at Microsoft.Exchange.WebServices.Data.ExchangeService.BindToFolder[TFolder](FolderId folderId, PropertySet propertySet) at Microsoft.Exchange.Tools.ExRca.Tests.EnsureEmptyFolderTest.PerformTestReally() Exception details: Message: The remote server returned an error: (403) Forbidden. Type: System.Net.WebException Stack trace: at System.Net.HttpWebRequest.GetResponse() at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse() at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request) I've done some research, but I have yet to find a working fix for this... it seems like some permissions are messed up in IIS, but I haven't figured out what.

  Read the article

• Windows 2008 R2 Not resolving IP's or domains

  - by InsaneAR

  I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

  Read the article

• How do I change HOMEDRIVE HOMEPATH and HOMESHARE in Windows XP?

  - by user26034

  I have got a laptop which is configured to have the user profile in a network drive. This is causing me a lot of headaches since the connectivity to my company is very slow. I want to relocate the profile of my user into a local directory. How do I do that? Those are the settings at the moment: C:\>set HOME HOMEDRIVE=P: HOMEPATH=\ HOMESHARE=\\SOMESERVER\_myuser$ The drive P is a network drive mapped to HOMESHARE. I can't find where windows is setting those environment variables, not even in the registry. The laptop is running Windows XP.

  Read the article

• Can't connect printer wirelessly to linksys wrt54g using WPS

  - by Mark J Seger

  I've already blown over 1/2 day on this. I keep checking and rechecking my router settings and they agree with what the documentation says for my brand new HP4620 printer. Supposedly I just tell the router to listen for connections and tell the printer to connect. It fails every time! Further, I have also read some opinions that when things are not configured correctly the linksys will disable WPS and it looks like that's happening as well. Further, it's causing other wireless devices in my house to lose there connectivity until I re-enable WPA networking on the router. Has anyone been here before? This is driving me crazy... -mark

  Read the article

• Cannot connect to internet with Clearwire modem

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently. EDIT: I called Clear's tech support and apparently their network is having significant problems at the moment. Guess there's nothing an end-user can do about it.

  Read the article

• Issues connecting to a pix 501 via console cable

  - by Bourne

  Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 ports so that's the first element that doesn't look right to me. Console cable light doesn't turn on when cable is plugged in and have tried rebooting it many many times to see the bootup sequence with no result. Also, I cannot connect to it via pdm or console but the traffic is permitted through. Are there any additional troubleshooting steps I could do or should I count it as dead? Thank you.

  Read the article

• Nagios: Is it possible to have multiple IPs for a host?

  - by Aknosis

  In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

  Read the article

• Unable to SSH into ESXi 4.1 host - "Access Denied"

  - by Andrew White

  I am unable to SSH into an existing ESXi server. I have a user which is in the "root" and "users" group and is able to connect via vSphere. However after enabling "Remote support (SSH)", attempting to connect by putty and entering my username/password when prompted I am presented with an "Access Denied" message. I have run through the options presented at this KB article to no avail. I have taken down the firewall on the machine (it is remote) temporarily to check if this helped - no change. The username/password are definitely correct and I can obviously get connectivity if I am presented with the username/password prompt. I am at a bit of a loss what else I can try. Thanks all

  Read the article

• Firewall is blocking internet traffic to OpenVPN clients

  - by user268905

  I have a virtual network setup with a Linux router/firewall connected to two private networks. An OpenVPN server in routing mode and a web server are in one of the networks. On the other are linux client machines which access the webserver and the Internet through the OpenVPN server. Also, external clients can access the OpenVPN from the Internet. The OpenVPN's server.conf is setup to use routing mode in udp, push DNS and routes to the network it is in so clients can access the webserver. Here are my very strict firewall rules. After connecting to the OpenVPN server, my clients can not access the Internet or the web server. When I allow FORWARD traffic to go through, it works just fine. The OpenVPN server has full internet connectivity. What firewall rule do I need to add to allow internet traffic to reach my clients?

  Read the article

• Network Performance issue

  - by qubemarker

  We have three Ubuntu 10.04 servers. One server is a storage server and the other two servers are configured as clients. The storage server has a good amount of capacity and it is integrated with windows Active directory server for Authentication. I am uploading some video files from both clients to the server and when I am uploading data from any one client alone I get about 26 MB/s data transfer rate. When I upload data from both the clients simultaneously I am only getting about 8 MB/s from each client. I have gigabit ethernet cards in all of the servers and a L2 Managed gigabit switch for connectivity. I don’t know why the data transfer rate is decreasing so much in simultaneous read and write. I have tried all of the TCP stack related settings suggested here. Can any assist with getting better read/write performance out of this setup? Any help is appreciated.

  Read the article

• How does one dismantle the ThinkPad Mini Dock Series 3 (model 4337)?

  - by Whaa

  I have a ThinkPad Mini Dock Series 3 with a spring that is too stiff, causing problems with the connectivity when a computer is docked. I tried to open it so that I can soften the spring, but hit a brick wall. I removed all the screws I could find at the the bottom and the back panel of the docking station, but the bottom part of the plastic case would still not part from the top of the plastic case. I even looked under some of the various stickers for more screws, but found nothing. Can anyone please help with pointers on dismantling this docking station?

  Read the article

• Seemingly random disconnections on Windows Server 2008 R2

  - by bobblez

  So I have a box running a Windows Server 2008 R2 in my LAN, which is running, among other things, a voip server used by other people. I myself am in the same subnet with the server, while the other users are not. Now, maybe on average twice a day, all the other users get disconnected from the server (and if I take a remote desktop connection to it, I'm not able to open any web pages either). These disconnections usually last only about 5 seconds, but sometimes they may last up to a minute. What could possibly cause this? I have all the updates installed from windows update and the motherboard of the server is asus p5b deluxe (if that is of any interest). edit: Forgot to mention that my own internet connectivity stays intact while the server's does not, and both computers are behind the same router.

  Read the article

• Minimal Lync 2013 Setup

  - by vkapadia

  I would like to install a Lync 2013 server at home. What would be the minimum requirements for it? I've seen the requirements and they seem pretty hefty, just want to know what I need for a basic set up. This will be for up to 5 users. I would like users to be able to connect from outside the network as well. From what I've been able to find, it looks like I'll need 3 servers. A domain controller, a lync front end server, and an edge server (for external connectivity, and it will need 2 network cards). Is that really all necessary? And how would they need to be connected (I've never connected a machine with multiple network cards)? Do they all have to be separate machines, or can I use VMs?

  Read the article

• Network location is not on the Domain

  - by Kyle Brandt

  I have a computer joined to the domain, but it doesn't view the network "location" as being part of the domain. I have tried removing and rejoining the domain and this doesn't help: Other computers in the same network don't have this problem. I have also tried several different icons, including both the train and the airplane which doesn't seem to make a difference. At least using nslookup, the server seems to have connectivity with the DCs in the same site. There also seem to be some errors that suggest a NULL domain: Computer: OR-WEB05.ds.stackexchange.com Description: NtpClient was unable to set a domain peer to use as a time source because of failure in establishing a trust relationship between this computer and the '' domain in order to securely synchronize time. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The trust relationship between this workstation and the primary domain failed. (0x800706FD)

  Read the article

• How to prefer ipv6 over ipv4 only for specific websites?

  - by kria

  I only have ipv6 connectivity via a HE tunnel on my router, so normally I want to prefer ipv4 over ipv6. For some websites however, I would like to prefer ipv6. Right now I have just set DisabledComponents to 0x20 and hard coded the ipv6 resolution into my hosts file for the sites i want to access over ipv6. Since these ip addresses change at times, this is not a good solution. Any ideas on how to handle this in a non-clunky way? Some kind of Chrome/Firefox add-on might do the trick, but I couldn't find one for this purpose.

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >