Search Results

Search found 676 results on 28 pages for 'dt dtdg'.

Page 25/28 | < Previous Page | 21 22 23 24 25 26 27 28  | Next Page >

  • Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

    - by Biohazard
    I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

    Read the article

  • USB Diskdrive cannot be formatted nor accessed

    - by Dmolish
    So I have just recently bought and 8GB USB stick(Kingston DT 100 G2) on which I had installed Linux. However I needed to reinstall said Linux so I formatted the stick to "default" settings which includes FAT32 filesystem. Later when the install process kept getting errors, I got advice that the problem might be with the FAT filesystem. I decided to try and format the stick to NTSF (format G:/fs:ntsf) but the formatting failed and the drive broke down. And with breaking down I mean you cannot access the drive anymore and when you plug it in Windows asks if I want to format the drive but despite my will the format always fails. To fix this I tried changing it back to FAT32 (format G:/fs:fat32), but i get "Error in IOCTL-call". Second thing I tried was trying to reset the filesystem with some 3rd party application like HP USB Disk Storage Format Tool. But the programs didn´t regocnize any media on the drive. So now I´m in the situation that I haven´t got any idea on what to do next. Is the drive recoverable or did I just create a piece of waste metal.

    Read the article

  • Dataset.ReadXml() - Invalid character in the given encoding

    - by NLV
    Hello all I have saved a dataset in the sql database in an xml column using the following code. XmlDataDocument dd = new XmlDataDocument(dataset); and passing this xml document as sql parameter using param.value = new XmlNodeReader(dd); The XML is like <NewDataSet><SubContractChangeOrders><AGCol>1</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>006</Contract_x0020_Number><ContractID>30</ContractID><ChangeOrderID>211</ChangeOrderID><Amount>0.0000</Amount><Udf_CostReimbursableFlag>false</Udf_CostReimbursableFlag><Udf_CustomerCode /><Udf_SubChangeOrderStatus /></SubContractChangeOrders><SubContractChangeOrders><AGCol>2</AGCol><SCO_x0020_Number>002</SCO_x0020_Number><Contract_x0020_Number>006</Contract_x0020_Number><ContractID>30</ContractID><ChangeOrderID>212</ChangeOrderID><Amount>0.0000</Amount><Udf_CostReimbursableFlag>false</Udf_CostReimbursableFlag></SubContractChangeOrders><SubContractChangeOrders><AGCol>3</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>111</Contract_x0020_Number><ContractID>87</ContractID><ChangeOrderID>12</ChangeOrderID><Amount>300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>4</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>222</Contract_x0020_Number><ContractID>80</ContractID><ChangeOrderID>6</ChangeOrderID><Amount>100.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>5</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>777</Contract_x0020_Number><ContractID>79</ContractID><ChangeOrderID>5</ChangeOrderID><Amount>200.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>6</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>786</Contract_x0020_Number><ContractID>77</ContractID><ChangeOrderID>3</ChangeOrderID><Amount>100.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>7</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>787</Contract_x0020_Number><ContractID>78</ContractID><ChangeOrderID>4</ChangeOrderID><Amount>500.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>8</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 009</Contract_x0020_Number><ContractID>219</ContractID><ChangeOrderID>78</ChangeOrderID><Amount>9000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>9</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 010</Contract_x0020_Number><ContractID>220</ContractID><ChangeOrderID>79</ChangeOrderID><Amount>13000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>10</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 012</Contract_x0020_Number><ContractID>222</ContractID><ChangeOrderID>83</ChangeOrderID><Amount>2300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>11</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 020</Contract_x0020_Number><ContractID>226</ContractID><ChangeOrderID>86</ChangeOrderID><Amount>5400.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>12</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con 021</Contract_x0020_Number><ContractID>227</ContractID><ChangeOrderID>87</ChangeOrderID><Amount>2300.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>13</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con001</Contract_x0020_Number><ContractID>208</ContractID><ChangeOrderID>72</ChangeOrderID><Amount>3000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>14</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con002</Contract_x0020_Number><ContractID>209</ContractID><ChangeOrderID>73</ChangeOrderID><Amount>400.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>15</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con003</Contract_x0020_Number><ContractID>210</ContractID><ChangeOrderID>74</ChangeOrderID><Amount>6000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>16</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con004</Contract_x0020_Number><ContractID>211</ContractID><ChangeOrderID>75</ChangeOrderID><Amount>9000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>17</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Con005</Contract_x0020_Number><ContractID>213</ContractID><ChangeOrderID>76</ChangeOrderID><Amount>17000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>18</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>Cont001</Contract_x0020_Number><ContractID>228</ContractID><ChangeOrderID>89</ChangeOrderID><Amount>2000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>19</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>PUR001</Contract_x0020_Number><ContractID>229</ContractID><ChangeOrderID>88</ChangeOrderID><Amount>1000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>20</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>PUR002</Contract_x0020_Number><ContractID>230</ContractID><ChangeOrderID>90</ChangeOrderID><Amount>3000.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>21</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>SC-002</Contract_x0020_Number><ContractID>2</ContractID><ChangeOrderID>7</ChangeOrderID><Amount>200.0000</Amount></SubContractChangeOrders><SubContractChangeOrders><AGCol>22</AGCol><SCO_x0020_Number>001</SCO_x0020_Number><Contract_x0020_Number>SC-004</Contract_x0020_Number><ContractID>7</ContractID><ChangeOrderID>65</ChangeOrderID><Amount>1000.0000</Amount></SubContractChangeOrders></NewDataSet> I'm trying to read it back as follows using (SqlConnection con = new SqlConnection("Server=#####;Initial Catalog=#####;User ID=####;Pwd=########")) { using (SqlCommand com = new SqlCommand("select * from dbo.tbl_#####", con)) { using (SqlDataAdapter ada = new SqlDataAdapter(com)) { ada.Fill(dt); MemoryStream ms = new MemoryStream(); object contractXML1 = dt.Rows[0]["SCOXML1"]; System.Runtime.Serialization.Formatters.Binary.BinaryFormatter bf = new System.Runtime.Serialization.Formatters.Binary.BinaryFormatter(); bf.Serialize(ms, contractXML1); ms.Seek(0, SeekOrigin.Begin); ds.ReadXml(ms); } } } I'm getting the following error Data at the root level is invalid. Line 1, position 6. Any ideas? NLV

    Read the article

  • Cocos2d score resetting is messing up (long post warning)

    - by Jhon Doe
    The score is not resetting right at all,I am trying to make a high score counter where every time you passed previous high score it will update.However, right now it is resetting during the game. For example if I had high score of 2 during the game it will take 3 points just to put it up to 3 as high score instead of keep going up until it is game over. I have came to the conclusion that I need to reset it in gameoverlayer so it won't reset during game. I have been trying to to do this but no luck. hello world ./h #import "cocos2d.h" // HelloWorldLayer @interface HelloWorldLayer : CCLayer { int _score; int _oldScore; CCLabelTTF *_scoreLabel; } @property (nonatomic, assign) CCLabelTTF *scoreLabel; hello world init ./m _score = [[NSUserDefaults standardUserDefaults] integerForKey:@"score"]; _oldScore = -1; self.scoreLabel = [CCLabelTTF labelWithString:@"" dimensions:CGSizeMake(100, 50) alignment:UITextAlignmentRight fontName:@"Marker Felt" fontSize:32]; _scoreLabel.position = ccp(winSize.width - _scoreLabel.contentSize.width, _scoreLabel.contentSize.height); _scoreLabel.color = ccc3(255,0,0); [self addChild:_scoreLabel z:1]; hello world implement ./m - (void)update:(ccTime)dt { NSMutableArray *projectilesToDelete = [[NSMutableArray alloc] init]; CGRect projectileRect = CGRectMake( projectile.position.x - (projectile.contentSize.width/2), projectile.position.y - (projectile.contentSize.height/2), projectile.contentSize.width, projectile.contentSize.height); BOOL monsterHit = FALSE; NSMutableArray *targetsToDelete = [[NSMutableArray alloc] init]; for (CCSprite *target in _targets) { CGRect targetRect = CGRectMake( target.position.x - (target.contentSize.width/2), target.position.y - (target.contentSize.height/2), target.contentSize.width, target.contentSize.height); if (CGRectIntersectsRect(projectileRect, targetRect)) { CCParticleFire* explosion = [[CCParticleFire alloc] initWithTotalParticles:200]; explosion.texture =[[CCTextureCache sharedTextureCache] addImage:@"sun.png"]; explosion.autoRemoveOnFinish = YES; explosion.startSize = 20.0f; explosion.speed = 70.0f; explosion.anchorPoint = ccp(0.5f,0.5f); explosion.position = target.position; explosion.duration = 1.0f; [self addChild:explosion z:11]; [explosion release]; monsterHit = TRUE; Monster *monster = (Monster *)target; monster.hp--; if (monster.hp <= 0) { [targetsToDelete addObject:target]; [[SimpleAudioEngine sharedEngine] playEffect:@"splash.wav"]; _score ++; } break; } } for (CCSprite *target in targetsToDelete) { [_targets removeObject:target]; [self removeChild:target cleanup:YES]; } if (targetsToDelete.count > 0) { [ projectilesToDelete addObject:projectile]; } [targetsToDelete release]; if (_score > _oldScore) { _oldScore = _score; [_scoreLabel setString:[NSString stringWithFormat:@"score%d", _score]]; [[NSUserDefaults standardUserDefaults] setInteger:_oldScore forKey:@"score"]; _score = 0; } } - (void)update:(ccTime)dt { NSMutableArray *projectilesToDelete = [[NSMutableArray alloc] init]; CGRect projectileRect = CGRectMake( projectile.position.x - (projectile.contentSize.width/2), projectile.position.y - (projectile.contentSize.height/2), projectile.contentSize.width, projectile.contentSize.height); BOOL monsterHit = FALSE; NSMutableArray *targetsToDelete = [[NSMutableArray alloc] init]; for (CCSprite *target in _targets) { CGRect targetRect = CGRectMake( target.position.x - (target.contentSize.width/2), target.position.y - (target.contentSize.height/2), target.contentSize.width, target.contentSize.height); if (CGRectIntersectsRect(projectileRect, targetRect)) { CCParticleFire* explosion = [[CCParticleFire alloc] initWithTotalParticles:200]; explosion.texture =[[CCTextureCache sharedTextureCache] addImage:@"sun.png"]; explosion.autoRemoveOnFinish = YES; explosion.startSize = 20.0f; explosion.speed = 70.0f; explosion.anchorPoint = ccp(0.5f,0.5f); explosion.position = target.position; explosion.duration = 1.0f; [self addChild:explosion z:11]; [explosion release]; monsterHit = TRUE; Monster *monster = (Monster *)target; monster.hp--; if (monster.hp <= 0) { [targetsToDelete addObject:target]; [[SimpleAudioEngine sharedEngine] playEffect:@"splash.wav"]; _score ++; } break; } } for (CCSprite *target in targetsToDelete) { [_targets removeObject:target]; [self removeChild:target cleanup:YES]; } if (targetsToDelete.count > 0) { [projectilesToDelete addObject:projectile]; } [targetsToDelete release]; if (_score > _oldScore) { _oldScore = _score; [_scoreLabel setString:[NSString stringWithFormat:@"score%d", _score]]; [[NSUserDefaults standardUserDefaults] setInteger:_oldScore forKey:@"score"]; _score = 0; } The game overlayer .h file game over @interface GameOverLayer : CCLayerColor { CCLabelTTF *_label; CCSprite * background; int _score; int _oldScore; } @property (nonatomic, retain) CCLabelTTF *label; @end @interface GameOverScene : CCScene { GameOverLayer *_layer; } @property (nonatomic, retain) GameOverLayer *layer; @end .m file gameover #import "GameOverLayer.h" #import "HelloWorldLayer.h" #import "MainMenuScene.h" @implementation GameOverScene @synthesize layer = _layer; - (id)init { if ((self = [super init])) { self.layer = [GameOverLayer node]; [self addChild:_layer]; } return self; } - (void)dealloc { [_layer release]; _layer = nil; [super dealloc]; } @end @implementation GameOverLayer @synthesize label = _label; -(id) init { if( (self=[super initWithColor:ccc4(0,0,0,0)] )) { CGSize winSize = [[CCDirector sharedDirector] winSize]; self.label = [CCLabelTTF labelWithString:@"" fontName:@"Arial" fontSize:32]; _label.color = ccc3(225,0,0); _label.position = ccp(winSize.width/2, winSize.height/2); [self addChild:_label]; [self runAction:[CCSequence actions: [CCDelayTime actionWithDuration:3], [CCCallFunc actionWithTarget:self selector:@selector(gameOverDone)], nil]]; _score=0; }

    Read the article

  • PC hangs and reboots from time to time

    - by Bevor
    Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

    Read the article

  • LINQ into SortedList

    - by Chris Simmons
    I'm a complete LINQ newbie, so I don't know if my LINQ is incorrect for what I need to do or if my expectations of performance are too high. I've got a SortedList of objects, keyed by int; SortedList as opposed to SortedDictionary because I'll be populating the collection with pre-sorted data. My task is to find either the exact key or, if there is no exact key, the one with the next higher value. If the search is too high for the list (e.g. highest key is 100, but search for 105), return null. // The structure of this class is unimportant. Just using // it as an illustration. public class CX { public int KEY; public DateTime DT; } static CX getItem(int i, SortedList<int, CX> list) { var items = (from kv in list where kv.Key >= i select kv.Key); if (items.Any()) { return list[items.Min()]; } return null; } Given a list of 50,000 records, calling getItem 500 times takes about a second and a half. Calling it 50,000 times takes over 2 minutes. This performance seems very poor. Is my LINQ bad? Am I expecting too much? Should I be rolling my own binary search function?

    Read the article

  • Wpf combobox selection change breaks Datatrigger

    - by biju
    Hi, I am trying to set the selected value of a combobox from a style trigger.It works as long as we dont manually change any value in the combobox.But it stops working altogether after manually changing the selection.How can i solve this.A sample code is attached.Please do help <Window x:Class="InputGesture.Window2" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:InputGesture" Title="Window2" Height="300" Width="300" Name="Sample"> <Window.Resources> <Style TargetType="{x:Type ComboBox}"> <Setter Property="ComboBox.SelectedValue" Value="1"/> <Style.Triggers> <DataTrigger Binding="{Binding ElementName=chk,Path=IsChecked}" Value="True"> <Setter Property="ComboBox.IsEnabled" Value="False"/> <Setter Property="ComboBox.SelectedValue" Value="2"/> </DataTrigger> </Style.Triggers> </Style> </Window.Resources> <StackPanel> <CheckBox Name="chk" Height="23"/> <ComboBox Name="cmb" Height="23" DisplayMemberPath="Name" SelectedValuePath="Id" ItemsSource="{Binding ElementName=Sample,Path=DT}"> </ComboBox> <Button Height="23" Click="Button_Click"/> </StackPanel> </Window>

    Read the article

  • Javascript errors from Google Adsense

    - by Arjun
    Hey there, On several of my adsense running sites, I have been getting the following errors: Unable to post message to [http://]googleads.g.doubleclick.net. Recipient has origin http://www.anekdotz.com. Unsafe JavaScript attempt to access frame with URL [http://]www.anekdotz.com/ from frame with URL [http://]googleads.g.doubleclick.net/pagead/ads?client=ca-pub-9099580055602120&output=html&h=250&slotname=9210181593&w=300&flash=10.0.42&url=http%3A%2F%2Fwww.anekdotz.com%2F&dt=1269901036429&correlator=1269901036438&frm=0&ga_vid=711000587.1269901037&ga_sid=1269901037&ga_hid=654061172&ga_fc=0&u_tz=-240&u_his=2&u_java=1&u_h=900&u_w=1440&u_ah=878&u_aw=1436&u_cd=24&u_nplug=10&u_nmime=101&biw=1365&bih=806&eid=44901212&fu=0&ifi=1&dtd=153&xpc=Xkfk1oufPQ&p=http%3A//www.anekdotz.com. Domains, protocols and ports must match. (from the Chrome javascript console) The ads seem to show properly and it doesn't affect my native javascript code. However sometimes these errors seem to slow down page loading. How can I fix this problem? (I modified the URLs to let me post this as I'm a new user)

    Read the article

  • SQLCLR and DateTime2

    - by Moe Sisko
    Using SQL Server 2008, Visual Studio 2005, .net 2.0 with SP2 (has support for new SQL Server 2008 data types). I'm trying to write an SQLCLR function that takes a DateTime2 as input and returns another DateTime2. e.g. : using System; using System.Data.SqlTypes; using Microsoft.SqlServer.Server; namespace MyCompany.SQLCLR { public class DateTimeHelpCLR { [SqlFunction(DataAccess = DataAccessKind.None)] public static SqlDateTime UTCToLocalDT(SqlDateTime val) { if (val.IsNull) return SqlDateTime.Null; TimeZone tz = System.TimeZone.CurrentTimeZone; DateTime res = tz.ToLocalTime(val.Value); return new SqlDateTime(res); } } } Now, the above compiles fine. I want these SqlDateTimes to map to SQL Server's DateTime2, so I try to run this T-SQL : CREATE function hubg.f_UTCToLocalDT ( @dt DATETIME2 ) returns DATETIME2 AS EXTERNAL NAME [SQLCLR].[MyCompany.SQLCLR.DateTimeHelpCLR].UTCToLocalDT GO This gives the following error : Msg 6551, Level 16, State 2, Procedure f_UTCToLocalDT, Line 1 CREATE FUNCTION for "f_UTCToLocalDT" failed because T-SQL and CLR types for return value do not match. Using DATETIME (instead of DATETIME2) works fine. But I'd rather use DATETIME2 to support the increased precision. What am I doing something wrong, or is DateTime2 not (fully) supported by SQLCLR ?

    Read the article

  • sqlalchemy date type in 0.6 migration using mssql

    - by nosklo
    I'm connection to mssql server through pyodbc, via FreeTDS odbc driver, on linux ubuntu 10.04. Sqlalchemy 0.5 uses DATETIME for sqlalchemy.Date() fields. Now Sqlalchemy 0.6 uses DATE, but sql server 2000 doesn't have a DATE type. How can I make DATETIME be the default for sqlalchemy.Date() on sqlalchemy 0.6 mssql+pyodbc dialect? I'd like to keep it as clean as possible. Here's code to reproduce the issue: import sqlalchemy from sqlalchemy import Table, Column, MetaData, Date, Integer, create_engine engine = create_engine( 'mssql+pyodbc://sa:sa@myserver/mydb?driver=FreeTDS') m = MetaData(bind=engine) tb = sqlalchemy.Table('test_date', m, Column('id', Integer, primary_key=True), Column('dt', Date()) ) tb.create() And here is the traceback I'm getting: Traceback (most recent call last): File "/tmp/teste.py", line 15, in <module> tb.create() File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/schema.py", line 428, in create bind.create(self, checkfirst=checkfirst) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 1647, in create connection=connection, **kwargs) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 1682, in _run_visitor **kwargs).traverse_single(element) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/sql/visitors.py", line 77, in traverse_single return meth(obj, **kw) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/ddl.py", line 58, in visit_table self.connection.execute(schema.CreateTable(table)) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 1157, in execute params) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 1210, in _execute_ddl return self.__execute_context(context) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 1268, in __execute_context context.parameters[0], context=context) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 1367, in _cursor_execute context) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/base.py", line 1360, in _cursor_execute context) File "/home/nosklo/.local/lib/python2.6/site-packages/sqlalchemy/engine/default.py", line 277, in do_execute cursor.execute(statement, parameters) sqlalchemy.exc.ProgrammingError: (ProgrammingError) ('42000', '[42000] [FreeTDS][SQL Server]Column or parameter #2: Cannot find data type DATE. (2715) (SQLExecDirectW)') '\nCREATE TABLE test_date (\n\tid INTEGER NOT NULL IDENTITY(1,1), \n\tdt DATE NULL, \n\tPRIMARY KEY (id)\n)\n\n' ()

    Read the article

  • jquery Ajax call resulting in Undefined Error in Firefox

    - by Kamal
    Hi I've been pulling my hair out for the last few hours with this problem. And the googling has been hampered by the very vagueness of this. So let me apologise for that first. Basically I'm using jquery and ajax (with C#) to return data from the backend and display that to the screen. The code works perfectly for firefox and IE. But when the data gets too large (??) (1500+ table rows) all I get is an undefined popup. Debugging in firefox (3.6) it doesn't even go into the success method. Worse still it doesn't even go into the error method. A lot of superfluous information there, but I'd rather show everything I'm doing. The Code $j.ajax( { type: "POST", url: "AdminDetails.aspx/LoadCallDetails", data: "{" + data + "}", contentType: "application/json;charset=utf-8", dataType: "json", success: function(msg) { $j("#CallDetailsHolder").html(msg.d); $j(".pointingHand").hide(); var oTable = $j('#dt').dataTable({ "bProcessing": true, "bPaginate": true, "bSort": true, "bAutoWidth": false, "aoColumns": [ { "sType": 'html' }, { "sType": 'custdate' }, { "sType": 'html-numeric' }, { "sType": 'ariary' }, { "sType": 'html' }, { "sType": 'html' } ], "oLanguage": { "sProcessing": "Traitement...", "sLengthMenu": "_MENU_ Montrer", "sZeroRecords": "Aucun enregistrement", "sInfo": "_START_ à _END_ de _TOTAL_", "sInfoEmpty": "0 à 0 de 0", "sInfoFiltered": "(filtrée à partir de _MAX_ )", "sInfoPostFix": "", "sSearch": "Rechercher", "sUrl": "", "oPaginate": { "sFirst": "premier", "sPrevious": "Précédent", "sNext": "suivant", "sLast": "dernier" } }, "sDom": 'T<"clear">lfrtip' }); $j('#CompteBlocRight0').unblock(); $j('#btnRangeSearch').click(function() { oTable.fnDraw(); }); }, error: function(msg) { DisplayError(msg); $j('#CompteBlocRight0').unblock(); } }); //$.ajax } The code definitely works. And even displays in IE without any issues. Any help???

    Read the article

  • C# XMLRPC Multi Threaded newPost something is not right

    - by user1047463
    I recently decided to get my feet wet with c# multi threading and my progress was good until now. My program uses XML-RPC to create new posts on wordpress. When I run my app on the localhost everything works fine and i successfully able to create new posts on wordpress using a multi threaded approach. However when I try to do the same with a wordpress installed on a remote server , new posts won't appear, so when i go to see all posts, the total number of posts remains unchanged. Another thing to note is the function that creates a new post does return the ID of a supposedly created posts. But as I mentioned previously the new posts are not visible when I try to access them in admin menu. Since I'm new to the multithreading I was hoping some of you guys can help me and check if I'm doing anything wrong. Heres the code that creates threads and calls create post function. foreach (DataRow row in dt.Rows) { Thread t = null; t = new Thread(createPost); lock (t) { t.Start(); } } public void createPost() { string postid; try { icp = (IcreatePost)XmlRpcProxyGen.Create(typeof(IcreatePost)); clientProtocol = (XmlRpcClientProtocol)icp; clientProtocol.Url = xmlRpcUrl; postid = icp.NewPost(1, blogLogin, blogPass, newBlogPost, 1); currentThread--; threadCountLabel.Invoke(new MethodInvoker(delegate { threadCountLabel.Text = currentThread.ToString(); })); } catch (Exception ex) { MessageBox.Show( createPost ERROR ->" + ex.Message); } }

    Read the article

  • WebDav And Exchange2007 HTTP1.1 404 Ressource not Found!

    - by adrien
    i have Exchange2007. and i am using the url: "https://exchange2007.exchange.server.com/Exchange/username/calendar"; 'calendar', or 'mailbox'( in your language! example, "boite de reception" in french or "calendário" in portuguese) with that url that i'm using i can list my ressources, but can't send a mail or write an appointement! why?!? See that i get a response of the server 207multistatus and ok, but the return a HTTP/1.1 404 Resource Not Found i wish a 201 created!!! (for my appointement) someone have better ideia ? thx. Console: >>>>>>> to server --------------------------------------------------- PROPPATCH /Exchange/marcelo/calend%C3%A1rio HTTP/1.1 Authorization: Basic bWFyY2Vsb0BleGNoYW5nZTptdXN0YWZhMSQ= Content-Type: text/xml; charset=utf-8 User-Agent: Jakarta Commons-HttpClient/2.0final Host: exchange2007.exchange.snap.com.br Content-Length: 1407 <D:propertyupdate xmlns:D="DAV:"> <D:set> <D:prop> <mapi xmlns="xmlns"> http://schemas.microsoft.com/mapi/ </mapi> <Cmd xmlns="urn:"> saveappt </Cmd> <dtEnd xmlns="urn:schemas:calendar"> 2009-06-30T10:30:00.000Z </dtEnd> <contentclass xmlns="DAV"> urn:content-classes:Appointment </contentclass> <Subject xmlns="urn:schemas:httpmail"> Changed Test Appointment Subject </Subject> <Location xmlns="urn:schemas:calendar"> do </Location> <responserequested xmlns="urn:schemas:calendar"> 0 </responserequested> <saveappt xmlns="urn:schemas:calendar:cmd"> 1 </saveappt> <ressource xmlns="DAV"> https://exchange2007.exchange.snap.com.br/Exchange/marcelo/calendárioassuntoteste.EML </ressource> <alldayevent xmlns="urn:schemas:calendar"> 0 </alldayevent> <to xmlns="urn:schemas:header"> adrien </to> <dtStart xmlns="urn:schemas:calendar"> 2009-06-30T10:00:00.000Z </dtStart> <isfolder xmlns="DAV"> 0 </isfolder> <cmd xmlns="Cmd"> saveappt </cmd> <HtmlDescription xmlns="urn:schemas:httpmail"> Let's meet here </HtmlDescription> <outlookmessageclass xmlns="http://schemas.microsoft.com/exchange/subject-utf8=Appointment"> IPM.Appointement </outlookmessageclass> <instancetype xmlns="urn:schemas:calendar"> 0 </instancetype> <meetingstatus xmlns="urn:schemas:calendar"> CONFIRMED </meetingstatus> <finvited xmlns="urn:schemas:mapi"> 0 </finvited> <BusyType xmlns="urn:schemas:calendar"> BUSY </BusyType> </D:prop> </D:set> </D:propertyupdate> ------------------------------------------------------------------------ <<<<<<< from server --------------------------------------------------- HTTP/1.1 207 Multi-Status Date: Thu, 16 Jul 2009 20:29:40 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET MS-Exchange-Permanent-URL: https://exchange2007.exchange.snap.com.br/Exchange/marcelo/-FlatUrlSpace-/b3ee92320938254c828a96e2e269a417-a6271d Repl-UID: <rid:b3ee92320938254c828a96e2e269a417000000a6282e> Content-Type: text/xml Content-Length: 825 ResourceTag: <rt:b3ee92320938254c828a96e2e269a417000000a6282eb3ee92320938254c828a96e2e269a41700545bb4844c> MS-WebStorage: 08.01.10240 <a:multistatus xmlns:a="DAV:" xmlns:b="xmlns" xmlns:c="urn:" xmlns:d="urn:schemas:calendar" xmlns:e="DAV" xmlns:f="urn:schemas:httpmail" xmlns:g="urn:schemas:calendar:cmd" xmlns:h="urn:schemas:header" xmlns:i="Cmd" xmlns:j="http://schemas.microsoft.com/exchange/subject-utf8=Appointment" xmlns:k="urn:schemas:mapi"> <a:response> <a:href> https://exchange2007.exchange.snap.com.br/Exchange/marcelo/Calend%C3%A1rio </a:href> <a:propstat> <a:status> HTTP/1.1 200 OK </a:status> <a:prop> <b:mapi> </b:mapi> <c:Cmd> </c:Cmd> <d:dtEnd> </d:dtEnd> <e:contentclass> </e:contentclass> <f:Subject> </f:Subject> <d:Location> </d:Location> <d:responserequested> </d:responserequested> <g:saveappt> </g:saveappt> <e:ressource> </e:ressource> <d:alldayevent> </d:alldayevent> <h:to> </h:to> <d:dtStart> </d:dtStart> <e:isfolder> </e:isfolder> <i:cmd> </i:cmd> <f:HtmlDescription> </f:HtmlDescription> <j:outlookmessageclass> </j:outlookmessageclass> <d:instancetype> </d:instancetype> <d:meetingstatus> </d:meetingstatus> <k:finvited> </k:finvited> <d:BusyType> </d:BusyType> </a:prop> </a:propstat> </a:response> </a:multistatus> ------------------------------------------------------------------------ >>>>>>> to server --------------------------------------------------- PROPFIND /Exchange/marcelo/calend%C3%A1rio HTTP/1.1 Authorization: Basic bWFyY2Vsb0BleGNoYW5nZTptdXN0YWZhMSQ= Content-Type: text/xml; charset=utf-8 User-Agent: Jakarta Commons-HttpClient/2.0final Host: exchange2007.exchange.snap.com.br Content-Length: 207 Depth: 0 <D:propfind xmlns:D="DAV:"> <D:prop> <D:displayname> </D:displayname> <D:getcontentlength> </D:getcontentlength> <D:getcontenttype> </D:getcontenttype> <D:resourcetype> </D:resourcetype> <D:getlastmodified> </D:getlastmodified> <D:lockdiscovery> </D:lockdiscovery> </D:prop> </D:propfind> ------------------------------------------------------------------------ <<<<<<< from server --------------------------------------------------- HTTP/1.1 207 Multi-Status Date: Thu, 16 Jul 2009 20:29:40 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET Content-Type: text/xml Accept-Ranges: rows MS-WebStorage: 08.01.10240 Transfer-Encoding: chunked <a:multistatus xmlns:a="DAV:" xmlns:b="urn:uuid:c2f41010-65b3-11d1-a29f-00aa00c14882/" xmlns:c="xml:"> <a:response> <a:href> https://exchange2007.exchange.snap.com.br/Exchange/marcelo/Calend%C3%A1rio/ </a:href> <a:propstat> <a:status> HTTP/1.1 200 OK </a:status> <a:prop> <a:displayname> Calendário </a:displayname> <a:getcontentlength b:dt="int"> 0 </a:getcontentlength> <a:resourcetype> <a:collection> </a:collection> </a:resourcetype> <a:getlastmodified b:dt="dateTime.tz"> 2009-07-16T20:29:40.098Z </a:getlastmodified> <lockdiscovery xmlns="DAV:"> </lockdiscovery> </a:prop> </a:propstat> <a:propstat> <a:status> HTTP/1.1 404 Resource Not Found </a:status> <a:prop> <a:getcontenttype> </a:getcontenttype> </a:prop> </a:propstat> </a:response> </a:multistatus>

    Read the article

  • Trying to parse OpenCV YAML ouput with yaml-cpp

    - by Kenn Sebesta
    I've got a series of OpenCv generated YAML files and would like to parse them with yaml-cpp I'm doing okay on simple stuff, but the matrix representation is proving difficult. # Center of table tableCenter: !!opencv-matrix rows: 1 cols: 2 dt: f data: [ 240, 240] This should map into the vector 240 240 with type float. My code looks like: #include "yaml.h" #include <fstream> #include <string> struct Matrix { int x; }; void operator >> (const YAML::Node& node, Matrix& matrix) { unsigned rows; node["rows"] >> rows; } int main() { std::ifstream fin("monsters.yaml"); YAML::Parser parser(fin); YAML::Node doc; Matrix m; doc["tableCenter"] >> m; return 0; } But I get terminate called after throwing an instance of 'YAML::BadDereference' what(): yaml-cpp: error at line 0, column 0: bad dereference Abort trap I searched around for some documentation for yaml-cpp, but there doesn't seem to be any, aside from a short introductory example on parsing and emitting. Unfortunately, neither of these two help in this particular circumstance. As I understand, the !! indicate that this is a user-defined type, but I don't see with yaml-cpp how to parse that.

    Read the article

  • ASP.Net GridView UpdatePanel Paging Gives Error On Second Click

    - by joe
    I'm trying to implement a GridView with paging inside a UpdatePanel. Everything works great when I do my first click. The paging kicks in and the next set of data is loaded quickly. However, when I then try to click a link for another page of data, I get the following error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12030 aspx code <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <contenttemplate> <asp:GridView ID="GridView1" runat="server" CellPadding="2" AllowPaging="true" AllowSorting="true" PageSize="20" OnPageIndexChanging="GridView1_PageIndexChanging" OnSorting="GridView1_PageSorting" AutoGenerateColumns="False"> <Columns> <asp:BoundField DataField="ActivityLogID" HeaderText="Activity Log ID" SortExpression="ActivityLogID" /> <asp:BoundField DataField="ActivityDate" HeaderText="Activity Date" SortExpression="ActivityDate" /> <asp:BoundField DataField="ntUserID" HeaderText="NTUserID" SortExpression="ntUserID" /> <asp:BoundField DataField="ActivityStatus" HeaderText="Activity Status" SortExpression="ActivityStatus" /> </Columns> </asp:GridView> </contenttemplate> </asp:UpdatePanel> code behind private void bindGridView(string sortExp, string sortDir) { SqlCommand mySqlCommand = new SqlCommand(sSQL, mySQLconnection); SqlDataAdapter mySqlAdapter = new SqlDataAdapter(mySqlCommand); mySqlAdapter.Fill(dtDataTable); DataView myDataView = new DataView(); myDataView = dt.DefaultView; if (sortExp != string.Empty) { myDataView.Sort = string.Format("{0} {1}", sortExp, sortDir); } GridView1.DataSource = myDataView; GridView1.DataBind(); if (mySQLconnection.State == ConnectionState.Open) { mySQLconnection.Close(); } } protected void GridView1_PageIndexChanging(object sender, GridViewPageEventArgs e) { GridView1.PageIndex = e.NewPageIndex; bindGridView(); } protected void GridView1_PageSorting(object sender, GridViewSortEventArgs e) { bindGridView(e.SortExpression, sortOrder); } any clues on what is causing the error on the second click?

    Read the article

  • object reference not set to an instance of object exception coming at runtime.

    - by amby
    Hi, I am getting this error at runtime: object reference not set to an instance of object my question is that am i using stringbuilder array correctly here. Because I am new in C#. and i think its the problem with my stringbuilder array. Below is the code: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Services; using System.Web.UI; using System.Web.UI.WebControls; using System.Data; using System.Text; using System.Web.Script.Serialization; using System.Web.Script.Services; using System.Collections; public partial class Testing : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } [WebMethod] public static string SendMessage() { try { al2c00.ldap ws = new al2c00.ldap(); Hashtable htPeople = new Hashtable(); //DataTable dt = ws.GetEmployeeDetailsBy_NTID("650FA25C-9561-430B-B757-835D043EA5E5", "john"); StringBuilder[] empDetails = new StringBuilder[100]; string num = "ambreen"; empDetails[0].Append("amby"); num = empDetails[0].ToString(); htPeople.Add("bellempposreport", num); JavaScriptSerializer jss = new JavaScriptSerializer(); string output = jss.Serialize(htPeople); return output; } catch(Exception ex) { return ex.Message + "-" + ex.StackTrace; } } } please reply me what i am doing wrong here.

    Read the article

  • Creative ways to punish (or just curb) laziness in coworkers

    - by FerretallicA
    Like the subject suggests, what are some creative ways to curb laziness in co-workers? By laziness I'm talking about things like using variable names like "inttheemplrcd" instead of "intEmployerCode" or not keeping their projects synced with SVN, not just people who use the last of the sugar in the coffee room and don't refill the jar. So far the two most effective things I've done both involve the core library my company uses. Since most of our programs are in VB.net the lack of case sensitivity is abused a lot. I've got certain features of the library using Reflection to access data in the client apps, which has a negligible performance hit and introduces case sensitivity in a lot places where it is used. In instances where we have an agreed standard which is compromised by blatant laziness I take it a step further, like the DatabaseController class which will blatantly reject any DataTable passed to it which isn't named dtSomething (ie- must begin with dt and third letter must be capitalised). It's frustrating to have to resort to things like this but it has also gradually helped drill more attention to detail into their heads. Another is adding some code to the library's initialisation function to display a big and potentially embarrassing (only if seen by a client) message advising that the program is running in debug mode. We have had many instances where projects are sent to clients built in debug mode which has a lot of implications for us (especially with regard to error recovery) and doing that has made sure they always build to release before distributing. Any other creative (ie- not StyleCop etc) approaches like this?

    Read the article

  • Optimize inserts

    - by ikerib
    Hi! I did an importer in VB .Net witch get data from an SQLServer an inserts this data throught ADSL connection in a remote MySQL server. in the first time, it was like 200 records, but now there are more than 500.000 records and it expends like 11hours exporting all the data and that is bad, veryyy bad. I need to optimize my importer, witch now gets the data into a datatable an them i have a function witch with a loop (row to row) inserts the data with a "insert into" query... like this: For Each dr As DataRow In dt.Rows Console.Write(".") Dim sql As String = "INSERT INTO clientes(id,nombrefis,nombrecom,direccion,codpos,municipio_id,telefono,fax,cif)" & _ "VALUES (@id,@nombrefis,@nombrecom,@direccion,@codpos,@municipio_id,@telefono,@fax,@cif)" cmd = New MySqlCommand(sql, cnn) cmd.Parameters.AddWithValue("id", Int32.Parse(dr("ID EMPRESA").ToString)) cmd.Parameters.AddWithValue("nombrefis", dr("NOMEMP")) cmd.Parameters.AddWithValue("nombrecom", dr("EMPRESA")) cmd.Parameters.AddWithValue("direccion", dr("DIRECC")) cmd.Parameters.AddWithValue("codpos", dr("CODPOS")) cmd.Parameters.AddWithValue("municipio_id", Int32.Parse(dr("CODIGO MUNICIPIO")).ToString) cmd.Parameters.AddWithValue("telefono", dr("TELEF")) cmd.Parameters.AddWithValue("fax", dr("FAX")) cmd.Parameters.AddWithValue("cif", dr("CIF")) cmd.ExecuteNonQuery() Next any ideas or advices? thanks so much

    Read the article

  • Is it just me? I find LINQ to XML to be sort of cumbersome, compared to XPath.

    - by Cheeso
    I am a C# programmer, so I don't get to take advantage of the cool XML syntax in VB. Dim itemList1 = From item In rss.<rss>.<channel>.<item> _ Where item.<description>.Value.Contains("LINQ") Or _ item.<title>.Value.Contains("LINQ") Using C#, I find XPath to be easier to think about, easier to code, easier to understand, than performing a multi-nested select using LINQ to XML. Look at this syntax, it looks like Greek swearing: var waypoints = from waypoint in gpxDoc.Descendants(gpx + "wpt") select new { Latitude = waypoint.Attribute("lat").Value, Longitude = waypoint.Attribute("lon").Value, Elevation = waypoint.Element(gpx + "ele") != null ? waypoint.Element(gpx + "ele").Value : null, Name = waypoint.Element(gpx + "name") != null ? waypoint.Element(gpx + "name").Value : null, Dt = waypoint.Element(gpx + "cmt") != null ? waypoint.Element(gpx + "cmt").Value : null }; All the casting, the heavy syntax, the possibility for NullPointerExceptions. None of this happens with XPath. I like LINQ in general, and I use it on object collections and databases, but my first go-round with querying XML led me right back to XPath. Is it just me? Am I missing something? EDIT: someone voted to close this as "not a real question". But it is a real question, stated clearly. The question is: Am I misunderstanding something with LINQ to XML?

    Read the article

  • Hi how to show the results in a datatable while we are using yui

    - by udaya
    Hi I am using yui to display a datagrid ... <?php $host = "localhost"; //database location $user = "root"; //database username $pass = ""; //database password $db_name = "cms"; //database name //database connection $link = mysql_connect($host, $user, $pass); mysql_select_db($db_name); //sets encoding to utf8 $result = mysql_query("select dStud_id,dMarkObtained1,dMarkObtained2,dMarkObtained3,dMarkTotal from tbl_internalmarkallot"); //$res = mysql_fetch_array($result); while($res = mysql_fetch_array($result)) { //print_r($res); $JsonVar = json_encode($res); echo "<input type='text' name='json' id='json' value ='$JsonVar'>"; } //print_r (mysql_fetch_array($result)); //echo "<input type='text' name='json' id='json' value ='$JsonVar'>"; ?> <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> <title>Client-side Pagination</title> <style type="text/css"> body { margin:0; padding:0; } </style> <link rel="stylesheet" type="text/css" href="build/fonts/fonts-min.css" /> <link rel="stylesheet" type="text/css" href="build/paginator/assets/skins/sam/paginator.css" /> <link rel="stylesheet" type="text/css" href="build/datatable/assets/skins/sam/datatable.css" /> <script type="text/javascript" src="build/yahoo-dom-event/yahoo-dom-event.js"></script> <script type="text/javascript" src="build/connection/connection-min.js"></script> <script type="text/javascript" src="build/json/json-min.js"></script> <script type="text/javascript" src="build/element/element-min.js"></script> <script type="text/javascript" src="build/paginator/paginator-min.js"></script> <script type="text/javascript" src="build/datasource/datasource-min.js"></script> <script type="text/javascript" src="build/datatable/datatable-min.js"></script> <script type="text/javascript" src="YuiJs.js"></script> <style type="text/css"> #paginated { text-align: center; } #paginated table { margin-left:auto; margin-right:auto; } #paginated, #paginated .yui-dt-loading { text-align: center; background-color: transparent; } </style> </head> <body class="yui-skin-sam" onload="ProjectDatatable(document.getElementById('json').value);"> <h1>Client-side Pagination</h1> <div class="exampleIntro"> </div> <input type="hidden" id="HfId"/> <div id="paginated"> </div> <script type="text/javascript"> /*YAHOO.util.Event.onDOMReady(function() { YAHOO.example.ClientPagination = function() { var myColumnDefs = [ {key:"dStud_id", label:"ID",sortable:true, resizeable:true, editor: new YAHOO.widget.TextareaCellEditor()}, {key:"dMarkObtained1", label:"Name",sortable:true}, {key:"dMarkObtained2", label:"CycleTest1"}, {key:"dMarkObtained3", label:"CycleTest2"}, {key:"dMarkTotal", label:"CycleTest3"}, ]; var myDataSource = new YAHOO.util.DataSource("assets/php/json_proxy.php?"); myDataSource.responseType = YAHOO.util.DataSource.TYPE_JSON; myDataSource.responseSchema = { resultsList: "records", fields: ["dStud_id","dMarkObtained1","dMarkObtained2","dMarkObtained3","dMarkTotal"] }; var oConfigs = { paginator: new YAHOO.widget.Paginator({ rowsPerPage: 15 }), initialRequest: "results=504" }; var myDataTable = new YAHOO.widget.DataTable("paginated", myColumnDefs, myDataSource, oConfigs); return { oDS: myDataSource, oDT: myDataTable }; }(); });*/ </script> <?php echo "m".$res['dMarkObtained1']; echo "m".$res['dMarkObtained2']; echo "m".$res['dMarkObtained3']; echo "Tm".$res['dMarkTotal']; {?><? }?> </body> </html> </body> </html> This is my page where i am fetching the data's from the database function generateDatatable(target, jsonObj, myColumnDefs, hfId) { var root; for (key in jsonObj) { root = key; break; } var rootId = "id"; if (jsonObj[root].length > 0) { for (key in jsonObj[root][0]) { rootId = key; break; } } YAHOO.example.DynamicData = function() { var myPaginator = new YAHOO.widget.Paginator({ rowsPerPage: 10, template: YAHOO.widget.Paginator.TEMPLATE_ROWS_PER_PAGE, rowsPerPageOptions: [5, 25, 50, 100], pageLinks: 10 }); // DataSource instance var myDataSource = new YAHOO.util.DataSource(jsonObj); myDataSource.responseType = YAHOO.util.DataSource.TYPE_JSON; myDataSource.responseSchema = { resultsList: root, fields: new Array() }; myDataSource.responseSchema.fields[0] = rootId; for (var i = 0; i < myColumnDefs.length; i++) { myDataSource.responseSchema.fields[i + 1] = myColumnDefs[i].key; } // DataTable configuration var myConfigs = { sortedBy: { key: myDataSource.responseSchema.fields[1], dir: YAHOO.widget.DataTable.CLASS_ASC }, // Sets UI initial sort arrow paginator: myPaginator }; // DataTable instance var myDataTable = new YAHOO.widget.DataTable(target, myColumnDefs, myDataSource, myConfigs); myDataTable.subscribe("rowMouseoverEvent", myDataTable.onEventHighlightRow); myDataTable.subscribe("rowMouseoutEvent", myDataTable.onEventUnhighlightRow); myDataTable.subscribe("rowClickEvent", myDataTable.onEventSelectRow); myDataTable.subscribe("checkboxClickEvent", function(oArgs) { var hidObj = document.getElementById(hfId); var elCheckbox = oArgs.target; var oRecord = this.getRecord(elCheckbox); var id = oRecord.getData(rootId); if (elCheckbox.checked) { if (hidObj.value == "") { hidObj.value = id; } else { hidObj.value += "," + id; } } else { hidObj.value = removeIdFromArray("" + hfId, id); } }); myPaginator.subscribe("changeRequest", function() { if (document.getElementById(hfId).value != "") { /*if (document.getElementById("ConfirmationPanel").style.display == 'block') { document.getElementById("ConfirmationPanel").style.display = 'none'; }*/ document.getElementById(hfId).value = ""; } return true; }); myDataTable.handleDataReturnPayload = function(oRequest, oResponse, oPayload) { oPayload.totalRecords = oResponse.meta.totalRecords; return oPayload; } return { ds: myDataSource, dt: myDataTable }; } (); } function removeIdFromArray(values, id) { values = document.getElementById(values).value; if (values.indexOf(',') == 0) { values = values.substring(1); } if (values.indexOf(values.length - 1) == ",") { values = values.substring(0, values.length - 1); } var ids = values.split(','); var rtnValue = ""; for (var i = 0; i < ids.length; i++) { if (ids[i] != id) { rtnValue += "," + ids[i]; } } if (rtnValue.indexOf(",") == 0) { rtnValue = rtnValue.substring(1); } return rtnValue; } function edityuitable() { var ErrorDiv = document.getElementById("ErrorDiv"); var editId=document.getElementById("ctl00_ContentPlaceHolder1_HfId").value; if(editId.length == 0) { ErrorDiv.innerHTML = getErrorMsgStyle("Select a row for edit"); //alert("Select a row for edit"); return false; } else { var editarray = editId.split(","); if (editarray.length != 1) { ErrorDiv.innerHTML = getErrorMsgStyle("Select One row for edit"); //alert("Select One row for edit"); return false; } else if (editarray.length == 1) { return true; } } } function Deleteyuitable() { var ErrorDiv = document.getElementById("ErrorDiv"); var editId=document.getElementById("ctl00_ContentPlaceHolder1_HfId").value; if(editId.length == 0) { ErrorDiv.innerHTML = getErrorMsgStyle("Select a row for Delete"); return false; } else { return true; } } function ProjectDatatable(HfJsonValue){ alert(HfJsonValue); var myColumnDefs = [ {key:"dStud_id", label:"ID", width:150, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkObtained1", label:"Marks", width:200, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkObtained2", label:"Marks1", width:150, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkObtained3", label:"Marks2", width:200, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkTotal", label:"Total", width:150, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"", formatter:"checkbox"} ]; var jsonObj=eval('(' + HfJsonValue + ')'); var target = "paginated"; var hfId = "HfId"; generateDatatable(target,jsonObj,myColumnDefs,hfId) } // JavaScript Document This is my script page when i load the page i do get the first row from the database but the consequtive data's are not displayed in the alert box how can i receieve the data's in the datagrid

    Read the article

  • What other things would be good to include in CSS reset (along with eric meyer reset) for any projec

    - by metal-gear-solid
    I know and use eric meyer CSS reset, but is there any more things which would be good to add in reset css? and can save our time and increase compatibility. This is default meyer's latest CSS reset code. /* v1.0 | 20080212 */ html, body, div, span, applet, object, iframe, h1, h2, h3, h4, h5, h6, p, blockquote, pre, a, abbr, acronym, address, big, cite, code, del, dfn, em, font, img, ins, kbd, q, s, samp, small, strike, strong, sub, sup, tt, var, b, u, i, center, dl, dt, dd, ol, ul, li, fieldset, form, label, legend, table, caption, tbody, tfoot, thead, tr, th, td { margin: 0; padding: 0; border: 0; outline: 0; font-size: 100%; vertical-align: baseline; background: transparent; } body { line-height: 1; } ol, ul { list-style: none; } blockquote, q { quotes: none; } blockquote:before, blockquote:after, q:before, q:after { content: ''; content: none; } /* remember to define focus styles! */ :focus { outline: 0; } /* remember to highlight inserts somehow! */ ins { text-decoration: none; } del { text-decoration: line-through; } /* tables still need 'cellspacing="0"' in the markup */ table { border-collapse: collapse; border-spacing: 0; }

    Read the article

  • Simple typemap example in swig java

    - by celil
    I am trying to wrap a native C++ library using swig, and I am stuck at trying to convert time_t in C, to long in Java. I have successfully used swig with python, but so far I am unable to get the above typemap to work in Java. In python it looks like this %typemap(in) time_t { if (PyLong_Check($input)) $1 = (time_t) PyLong_AsLong($input); else if (PyInt_Check($input)) $1 = (time_t) PyInt_AsLong($input); else if (PyFloat_Check($input)) $1 = (time_t) PyFloat_AsDouble($input); else { PyErr_SetString(PyExc_TypeError,"Expected a large number"); return NULL; } } %typemap(out) time_t { $result = PyLong_FromLong((long)$1); } I guess the in map from Java to C would be: %typemap(in) time_t { $1 = (time_t) $input; } How would I complete the out map from C to Java? %typemap(out) time_t ??? Would I need typemaps like the ones below? %typemap(jni) %typemap(jtype) %typemap(jstype) I need this in order to wrap C functions like this: time_t manipulate_time (time_t dt);

    Read the article

  • I'm trying to install psycopg2 onto Mac OS 10.6.3; it claims it can't find "stdarg.h" but I can see

    - by cojadate
    I'm desperately trying to successfully install psycopg2 but keep running into errors. The latest one seems to involve it not being to find "stdarg.h" (see code below). However I can see with my own eyes that a file called stdarg.h exists at /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h (where it claims it can't find anything) so I've no idea what to do about it. I'm running Mac OS 10.6.3 and within the last few days I've made sure I have all the latest OS developer tools. I have Python 2.6.2 and PostgreSQL 8.4 if that makes any difference. python setup.py install running install running build running build_py running build_ext building 'psycopg2._psycopg' extension creating build/temp.macosx-10.3-fat-2.6 creating build/temp.macosx-10.3-fat-2.6/psycopg gcc -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -O3 -DPSYCOPG_DEFAULT_PYDATETIME=1 -DPSYCOPG_VERSION="2.2.1 (dt dec ext pq3)" -DPG_VERSION_HEX=0x080404 -DPSYCOPG_EXTENSIONS=1 -DPSYCOPG_NEW_BOOLEAN=1 -DHAVE_PQFREEMEM=1 -DHAVE_PQPROTOCOL3=1 -I/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6 -I. -I/opt/local/include/postgresql84 -I/opt/local/include/postgresql84/server -c psycopg/psycopgmodule.c -o build/temp.macosx-10.3-fat-2.6/psycopg/psycopgmodule.o In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4, from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85, from psycopg/psycopgmodule.c:27: /Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory lipo: can't figure out the architecture type of: /var/folders/MQ/MQ-tWOWWG+izzuZCrAJpzk+++TI/-Tmp-//ccakFhRS.out error: command 'gcc' failed with exit status

    Read the article

  • How do I fetch a set of rows from data table

    - by cmrhema
    Hi, I have a dataset that has two datatables. In the first datatable I have EmpNo,EmpName and EmpAddress In the second datatable I have Empno,EmpJoindate, EmpSalary. I want a result where I should show EmpName as the label and his/her details in the gridview I populate a datalist with the first table, and have EmpNo as the datakeys. Then I populate the gridview inside the datatable which has EmpNo,EmpJoinDate and EmpAddress. My code is some what as below Datalist1.DataSource = dt; Datalist1.DataBind(); for (int i = 0; i < Datalist1.Items.Count; i++) { int EmpNo = Convert.ToInt32(Datalist1.DataKeys[i]); GridView gv = (GridView)Datalist1.FindControl("gv"); gv.DataSource = dt2; gv.DataBind(); } Now I have a problem, I have to bind the Details of the corresponding Employee to the gridview. Whereas the above code will display all the details of all employees in the gridview. If we use IEnumerable we give a condition where(a=a.eno=EmpNo), and bind that list to the gridview. How do I do this in datatable. kindly do not give me suggestions of altering the stored procedure which results the values in two tables, because that cannot be altered. I have to find a solution within the existing objects I have. Regards Hema

    Read the article

  • Pronunciation of programming structures (particularly in c#)

    - by Andrzej Nosal
    As a non-English speaking person I often have problems pronouncing certain programming structures and abbreviations. I've been watching some video tutorials and listening to podcasts as well, though I couldn't catch them all. My question is what is the common or correct pronunciation of the following code snippets? Generics, like IEnumerable<int> or in a method void Swap<T>(T lhs, T rhs) Collections indexing and indexer access e.g. garage[i], rectangular arrays myArray[2,1] or jagged[1][2][3] Lambda operator =>, e.g. in a where extension method .Where(animal => animal.Color == Color.Brown) or in an anonymous method () => { return false;} Inheritance class Derived : Base (extends?) class SomeClass : IDisposable (implements?) Arithemtic operators += -= *= /= %= ! Are += and -= pronounced the same for events? Collections initializers new int[] { 4, 5, 8, 9, 12, 13, 16, 17 }; Casting MyEnum foo = (MyEnum)(int)yourFloat; (as?) Nullables DateTime? dt = new DateTime?(); I tagged the question with C# as some of them are specific to C# only.

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28  | Next Page >