Search Results

Search found 8885 results on 356 pages for 'laptop stands'.

Page 25/356 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Laptop GPU apparently blew up, motherboard doesn't even turn on its power LED. [But..]

    - by leladax
    If I take out the GPU, the motherboard LED turns on but then [if it attempts to power up and boot] it turns off after 2 seconds [fans turn on normally in that short period]. [Without the GPUs out there's not even an attempt to boot.] It's an SLI motherboard for a toshiba (model X200-219). If I take out one of the GPUs (they are on top of each other) it surprisingly lets the motherboard turn on too (as it is if both are out) but it still turns off after 2-3 seconds, same behavior. I wonder if it's the GPU that produces the 'turn off after being on' behavior and not something else. [Has anyone seen this behavior with blown up GPUs or could it be something else?]

    Read the article

  • Is there an easy way to disable this laptop's touchpad?

    - by sestocker
    Specifically, I'm on a Dell Inspiron 1525. I'd like to disable the touchpad so that I can re-enable if my mouse were to run out of batteries (so physically breaking the connection to the motherboard or uninstalling the driver will not be the best options). In the Control Panel, when I go to "Mouse" and find the touch pad, there is no disable option. Any ideas? Edit: I am on Windows 7. There is a driver on the Dell site that might allow an option to disable it, but I cannot install it on Windows 7.

    Read the article

  • Toshiba Satellite Laptop Realtek Network Driver Error code (10)?

    - by Silent
    hello all i have a Toshiba 64 bit windows vista, i tried looking for the drivers from the main website but no luck all the ones i got did not work or did not do anything. would someone know where i can find it or maybe fix this issue it will not find any network wireless or even if i hook up the Ethernet cable. i don't know why Toshiba makes it hard they should have a complete bundle. Model: A305-S687

    Read the article

  • Laptop with Intel Graphics: external VGA monitor only gets signal on boot (no "hot plugging")

    - by iveand
    I am able to get an external VGA monitor (or projector) to work if I start my laptop with it connected. However, if I start the laptop with it disconnected there is no signal on the external. The Displays screen shows the external, and thinks that it is active, but there is no signal being sent to it. This has been a persistent problem since 10.04 (I am now on 12.04.... each upgrade hoping something is improved). I should note that even when it works (starting with display connected), Displays still says the monitor is "unknown" (but it sends the signal). For the correct resolution to display, I have had to add a few xrandr lines for my monitor to my .xprofile file... otherwise resolution is limited to default 1024x768. So, resolution issues can be worked around, but the main issue is that the external doesn't get a signal without starting the machine with it connected. I have tried: adding i915.modeset=1 to grub (also i965.modeset=1 since someone posted that this helped even though lshw shows i915) adding following ppa and doing a dist-upgrade: sudo add-apt-repository ppa:xorg-edgers/ppa Here are the details: Laptop: Toshiba Tecra M10 lspci listings for video: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) sudo lshw -C video listing: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:ff400000-ff7fffff memory:e0000000-efffffff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc00000-ffcfffff "System Info" shows my graphics as the following Mobile Intel® GM45 Express Chipset x86/MMX/SSE2

    Read the article

  • Getting Xbox Live via a wired network with my laptop that has internet access wirelessly

    - by Alex Franco
    I'm running the latest version (as of yesterday anyways) of Ubuntu Desktop 64bit, but installed on my laptop if it makes a difference. I had Windows 7 preinstalled when i bought it and it worked fine with the wireless from my house and bridging the connection with a LAN to my xbox for Live. Now with Ubuntu I tried the same setup, but I'm unfamiliar with Ubuntu so I didn't get far. Best I got so far is wireless internet on my laptop and a wired connection to the xbox that continually connects and disconnects. Heres my network settings. if theres fields not included its because theyre empty on mine or theyre my MAC address or network password Wireless Network 1 settings: Connect Automatically: Checked. Available to all Users: Checked Wireless: SSID: Franco's Mode: Infrastructure MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Wired Network 1: Connect Automatically: Checked Available to all Users: Checked Wired: MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Any help would be greatly appreciated. EDIT: 6:26pm It seems to be staying connected now. Doing the Network test on my xbox it pickups the network, but cannot detect any PC. Restarting the Xbox, however, leaves my computer unable to connect bringing up the Wire Network disconnected 'blip' every minute or so again. Before I had restarted the Xbox it said "Connected 100 MB/s". Now it only says "connecting". I did have my computer and xbox on in this Wired Network Disconnected blip cycle for a long period of time so it may have finally connected, just without the ability to detect my laptop. I left for 2 hours or so in the middle of typing up the original question. I finished posting this when i got back and then tried to mess with it a bit again, in case youre wondering why i didnt include this before... I've said too much. Forgive my long-winded fingers :p

    Read the article

  • Change X settings to boot into laptop with non working screen using an external monitor

    - by dassouki
    My laptop committed suicide. Is there a way I can boot into my ubuntu using an external screen? Ubuntu 10.10 video: Nvidia 9500 gm i think I can get dual screen upto and until the ubuntu login screen at which point it goes back into laptop display only. Then I can just type and enter my password. The system (i assume boots into ubuntu) but I got no way of going onto the x or nvidia settings to change my display to external monitor EDIT well I booted into terminal using control shift F1 i think, and now I'm trying to reporgram x.org, but strangely it seems bland with not a lot of settings in it EDIT 2 xrandr returns "Can't open display" EDit 3 after some messing around with xrandr and xinit ... my x.org only displays one monitor instead of two in its settings although both, i.e. the laptop and external screens are both connected. EDIT 4 it seems that x.org now has a "screen" and "monitor" section, I can't seem to be able to boot linux into monitor. I get a "Monitor is not a valid keyword" in this subsection

    Read the article

  • Lubuntu 12.04 on Acer laptop boots to blank blue screen

    - by WGCman
    My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • Does lesser wide screen fit better than a large one?

    - by artaxerxe
    About 3 weeks ago I changed my job. At the former workplace, I had 2 monitors for doing programming (GUI and core programming). Here, at the place where I am, the administrators gave me a laptop (15.6 inch) and wanted to provide me a wider screen additional to the laptop's one. I said that for now I want to test as it is, with the laptop's screen. I also want to mention, that in the current job I'm not targeted for GUI development. My feeling until now (but it can be just a feeling) is that working on this single not so wide screen, I'm not so weary after a full day work as I was with 2 wide monitors. Does anyone have any recommendations on this problem? Does lesser screens (in my case exclusively 15.6 inch vs 20 inch screens) affect your eyes? If anyone have any knowledge about, please feel free to say what's your opinion. P.S. I think that's a good site for this kind of question. Otherwise, please guide me on what site from StackExchange should I put it. Thanks.

    Read the article

  • Dell Studio 1737 Overheating

    - by Sean
    I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

    Read the article

  • Bridging my laptop's wireless and wired adaptors

    - by stacey.richards
    I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

    Read the article

  • Fixing Windows install by connecting its hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • Fixing Windows install by connecting it's hard drive via USB to a different laptop

    - by Jason
    I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

    Read the article

  • How to Calibrate HP Laptop Battery

    - by batteryfast
    Calibrating the HP Laptop Battery This document pertains to HP Notebook PCs with Windows 7 and Vista. Calibrating the laptop battery Calibrating the battery means recharging the battery to its maximum capacity and resetting the battery gauge to display the level of charge accurately. The Windows system tray battery meter may not correctly display the battery charge level when a notebook is new or has not been used for a long period of time. If the battery gauge becomes inaccurate, use one of the methods below to calibrate the battery gauge reading. Calibrate the battery while PC is in use A calibration cycle requires that the battery be completely charged and then completely discharged. During the calibration cycle, the power management properties must be disabled to allow the battery to completely discharge.

    Read the article

  • Jupiter in Ubuntu 13.10 (Laptop Overheating)

    - by Daniel Pacheco
    I was wondering if Jupiter (Interface for display, power and device control) will work in Ubuntu 13.10, because my laptop (Toshiba Satellite C855D, AMD A6-4400M with Radeon HD Graphics running Ubuntu 13.04 x64) keeps overheating, I tried some other tools, like laptop-mode-tools or TLP, none of those work, not at all. Jupiter was the only option and it's supposedly discontinued, the version I'm using is being maintained by JoliCloud team, but they told me they're not sure if it will work with 13.10... If it doesn't work, I'm definitely not upgrading, since overheating is a major issue for me... Thanks in advance!

    Read the article

  • Still no keyboard after uninstalling Ubuntu

    - by Muhammad Rushdi Ibrahim
    I installed Ubuntu 11.04 for the first time yesterday. After rebooting for the first time, I couldn't log in because I couldn't type anything using the keyboard. After rebooting, the keyboard failed completely; I can only automatically boot into Windows since I can't choose Ubuntu. Then the problem got worse. I had to use On-Screen keyboard to log in into Windows. Still no keyboard. When I rebooted, my laptop couldn't reboot at all! I had to hard reboot. I decided to uninstall the Ubuntu, using the Add/Remove program in the Control Panel. I uninstalled it successfully. My laptop automatically boots into Windows without Ubuntu option. However, I still don't have the keyboard! Please help me. Acer Aspire 4935 Windows 7 Ultimate Thanks.

    Read the article

  • Laptop battery fails to change unless power level very low, and then dicharges quickly

    - by dana
    I've had my laptop for about 5-6 weeks. Its a DELL Alienware M15x and I have never replaced the battery,such as http://www.pcbatteria.com/dell-alienware-m15x-series.html. The past 3 weeks or so the battery can only charge when the computer is off or in a low power state. If its on and plugged in it will still lose its charge unless its already at 100%. On a full charge without being plugged in it only holds its charge for about 1 hour on "power saver". This makes it extremely hard to use it as a portable device so i'm trying to find a way to troubleshoot the problem without having to buy a new battery or laptop. Unfortunately I need it for the next few months in some of my classes so its kind of urgent. Thanks for your help!

    Read the article

  • Cannot control the fan on a Sony Vaio laptop

    - by Xobb
    I've got Sony Vaio laptop and my fan is on all the time, though the temperature on the video-adapter is always over 60°?. As I've googled, vaiofand does not support VPC-EA series. Is there anything I can do with that or I need another laptop? I'm using the following graphics card: 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] though the problem is not with the graphics card. I've mentioned its temperature as the highest (64°C now btw). Seems like the notebook is always overheated and I cannot control the fan speed to make it cooler. And yes, I'm using the proprietary driver ATI/AMD FGLRX graphics driver. I'm using Kubuntu 11.04.

    Read the article

  • Fan running constantly on a Dell D420 laptop

    - by Halik
    I'm running latest Ubuntu 12.04 beta on a Dell D420 laptop. The fan is spinning almost constantly - even after turning the PC off, letting it cool down, and then turning it back on, the fan will turn on after some idle time. Not to mention any CPU work. The CPU temps are normal, in range of 50-55 idle, and up to 70 with some load. It wouldn't be an issue, but the same PC running Fedora, or Arch Linux, had a much more modest fan profile - the temps were managed while you seldom heard the fan. To counter the problem, I currently use i8k tools, set manual temperature thresholds which seemed to have worked, but the i8kmon has a tendency to cycle the fan between lower and higher state within aboutin a second intervals - which is extremely annoying. As far as I can tell I did not run any special software (beside laptop-mode-tools), or any additional kernel modules when running Arch Linux and I can't tell about Fedora.

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >