Search Results

Search found 1314 results on 53 pages for 'locate'.

Page 25/53 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • Compressed disk image on Linux

    - by Aaron Digulla
    I just got my new computer with a much bigger harddisk. I think I copied all important files over but just to be sure, I'd like to keep a disk image of my old disk. To save space, I'd like to compress it but I didn't find an option to mount a compressed image. My goals: Result must be easy to access No need to decompress the whole thing before I can access anything Files should be quick to locate - no TAR/CPIO archive Necessary space should be less than just copying the files over So ideally, I'm looking for a read-only, compressed file system which I can create in a file and which grows automatically.

    Read the article

  • How to charge an iPhone on a Windows PC without Installaing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • How can I troubleshoot SSD disconnection problems on Windows 7?

    - by 0xC0000022L
    I have a small SSD (Transcend StoreJet TS256GESD200K) which I am using on several computers. The drive is formatted with NTFS and recently I started noticing disconnects. Normally one probably wouldn't notice (you don't even get the notification sound in Windows when it disconnects), but since I use USBDLM and run a VM from that SSD, I get to see this first-hand. How could I best figure out whether the problem is the hardware (SSD, USB socket, USB cable or something in the PC) or software? In short: how can I locate the source of the disruption so that I can work on removing the problem? Side-note: SMART status for the SSD is clean.

    Read the article

  • Domain Controller Placement

    - by Matt
    I've been working through some Exchange training documentation (the official MS e-learning package) and all of the design scenarios allude to placing at least one DC from your forest root domain in every site. I'm not sure whether this just relates to Exchange, but I can think of a number of issues we experience in our forest that would be resolved by this. For example, a Microsoft support engineer has stated that EVERY client in a child domain (i.e. all workstations and member servers) need access to a forest root DC to check certificate/template permissions, even on a subordinate CA. I have attempted to locate documentation or guidelines from Microsoft on this, but have not been able to find anything. I found the Domain Controller Placement guide, but it's only a form - you would use it to document where you will place your DCs, but it doesn't give any guidance on where you should deploy them. Does anyone know where, or if, I can find any such documentation?

    Read the article

  • Sharepoint insists it knows the link to my UNC and won't let me remove hyperlink formatting

    - by ray023
    We have a file share at work (one I do not have the power to rename) and it contains a space in it: \\WorkFileShare\Visual Studio\SP1 I'm creating a Wiki Entry that informs users they can locate the VS2010 SP1 download on this Share. For some reason, SharePoint will highlight and hyperlink the UNC up to the space. (I've been dealing with this behavior for years in Outlook and I fix by putting focus on the character before the space and then hitting backspace to remove the formatting). Simple enough and SharePoint also removes the formatting when you backspace on the character before the space. However, as soon as I move away from the link, SharePoint goes right back to highlighting and hyperlinking what it thinks is the UNC. Naughty Sharepoint!! So does anyone have any idea how to clear the formatting? NOTE: Highlighting the text and clicking on the "Clear Format" icon does not work.

    Read the article

  • .VBS scripts have stopped running... No idea why!

    - by Django Reinhardt
    We have two .vbs scripts that are run by our Task Scheduler that have suddenly stopped working for no reason we can fathom. We haven't significantly altered our system configuration in the last 24 hours, and the scripts have run without a hitch for months. According to the Task Scheduler the scripts just keep running and never stop, which is never the case. I stopped all running versions through the Scheduler and manually attempted to run one of the .vbs scripts. I got the following error message: Line: 15 Error: The system cannot locate the resource specified. Code: 800C0005 Source: msxml3.dll Line 15 (or 16 to be more accurate - line 15 itself is blank, but so is line 1) is: xml.Send Would could have suddenly caused this? Looking in system32\ and sysWOW64\ shows that msxml3.dll exists. Anybody got any ideas? Thanks a lot!

    Read the article

  • Differences between FCKeditor and CKeditor?

    - by matt74tm
    Sorry, but I've not been able to locate anything (even on the official pages) informing me of the differences between the two versions. Even a query on their official forum has been unanswered for many months - http://cksource.com/forums/viewtopic.php?f=11&t=17986&start=0 The license page talks a bit about the "internal" differences http://ckeditor.com/license CKEditor Commercial License - CKSource Closed Distribution License - CDL ... This license offers a very flexible way to integrate CKEditor in your commercial application. These are the main advantages it offers over an Open Source license: * Modifications and enhancements doesn't need to be released under an Open Source license; * There is no need to distribute any Open Source license terms alongside with your product and no reference to it have to be done; * No references to CKEditor have to be done in any file distributed with your product; * The source code of CKEditor doesn’t have to be distributed alongside with your product; * You can remove any file from CKEditor when integrating it with your product.

    Read the article

  • Canon HV20 recognized, but no drivers in Windows 7 x64

    - by Tuminoid
    My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

    Read the article

  • Windows 7 - Windows 8 dual boot installation error

    - by Nikhil
    I am trying to dual boot Windows 8 with Windows 7 . But I keep getting an error while selecting the drive to install on . The error is ""Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." " . What might be the problem ? Also previously I tried to install only Windows 7 on my HDD . I downloaded the ISO from digital river . Made bootable usb . I got the same above error . But when I tried to install it via other usb which had pirated Windows 7 downloaded from torrents it gave no error . My system config is Motherboard - Gigabyte G41 MT S2P HDD - 160 GB SATA RAM - 8 GB Help !!!

    Read the article

  • How do I change the .bash_history file location?

    - by Brian Graham
    I'm running CentOS 6.x and want to move the .bash_history to a different location. The home directories of my users are (because I run a VPS) in /var/www/vhost/<domain>.<tld> which is FTP accessible (and it should be). Because of this, I have changed the AuthorizedKeysFile for SSH connections out of the normal ~/.ssh/authorized_keys since FTP connections would easily be able to locate them. At the same time I want to move the .bash_history file to /home/%u/.bash_history where %u is the current user.

    Read the article

  • modprobe not found at all

    - by timmeyh
    I know that a lot of people had problems finding modprobe which was mostely due to an unconfigured $PATH. This time however I logged into a machine (Linux mymachine 2.6.32-6-pve #1 SMP Mon Jan 23 08:27:52 CET 2012 i686 GNU/Linux with root rights) and modprobe wasn't found at all. This are the steps I have taken so far: - which modprobe => no results - locate modprobe => no results - my $PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11: - find / -name "modprobe*" => /proc/sys/kernel/modprobe - cat /proc/sys/kernel/modprobe => /sbin/modprobe - /sbin/modprobe => no such file or directory Ass you can see no modprobe at all. Does anyone else has a suggestion/ sollution so I can use modprobe?

    Read the article

  • Windows 2003 - RAS service - VPN client can only connect to server, not internal network

    - by Gk
    Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/ Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The problem is when a client connect to server, client can connect to server(10.10.0.10), but cannot connect to another host locate in internal network (10.10.0.11) even cannot ping to 10.10.0.50. RAS configured with IP routing enabled, client connect with options: Use default gateway on remote network. I'm messed up and can not figure out what wrong. Please help me T_T. TIA, giobuon

    Read the article

  • How to charge an iPhone on a Windows PC without Installing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • Laptop white screen on power-up. Still displays via HDMI output

    - by Inno
    my wife's laptop recently started displaying a white screen. It doesn't show post or anything, just a white screen when it's powered on. However, it works normally with HDMI output to our television. I took it apart and fiddled with both ends of the display cable, but I either didn't fiddle correctly or that's just not the problem. I also noticed that the screen won't turn off anymore when the laptop is closed. Is there a name for the mechanism that controls this function, so I can try and locate it? My guesses are that the problem lies with the screen itself or the display cable, but I'm curious if there's anything else I might be overlooking. Also of note is that the left hinge is partially broken. The corner of the plastic computer case broke off, so the hinge is exposed and doesn't stay in place. I've tried holding it in place, wiggling it around, tapping various parts of the computer, but the white screen remains.

    Read the article

  • How to disable Spotlight content indexing in Mac OS

    - by o.v.
    From Windows experience, I could always elect Live search to only index file names not their content. Is this something that can be done with Spotlight on a Mac? It used to index absolutely everything, for instance it would return a bunch of video files for any obscure character combination typed into the search field. Right now I've disabled Spotlight entirely as per this answer, but it seems to have disabled searching altogether. For instance, Finder is yet to locate any .pdf files in a small directory as I'm typing this question (unlike windows search which would still be able to work even with indexing disabled) Alternatively, if there is any way (including a trusted third-party app) that will index file names and metadata e.g. ID3 tags that would likely be the preferred option.

    Read the article

  • Windows 7 Refuses To Install To A Partition

    - by PP
    I have 4 HDDs in my PC on a Gigabyte EP45-UD3 rev1.0 motherboard on SATA ports 0-3 and running AHCI mode. Windows 7 refuses to let me install to any partitions or disks I select saying Setup was unable to create a new system partition or locate an existing system partition. I will get to the bottom of this, after I sacrifice my Friday nights and weekends to Microsoft (they don't just want my money, they want my soul). Keep tuned, if no one has the answer, I will find one. I suspect I have to rip out 3 HDDs so that the n00bs at Microsoft can actually deal with spinning media. Really angers me how paid-for-products are so inferior to Linux they don't even qualify to be called "software".

    Read the article

  • linking Office 365 and ADFS on Azure

    - by Gaurav
    i am trying to link my ADFS to Office 365 in order to set up Single Sign On for Office 365. I am going over this blog post. at Step 5, i am supposed to run Powershell commands so i can connect the ADFS to Office 365. Set-MsolAdfscontext -Computer <AD FS server FQDN> Convert-MsolDomainToFederated -DomainName <domain name> i am unable to determine the FQDN for the ADFS server. i searched around a lot on the web, but was not able to locate the solution. i am just getting started with all configuration of ADFS and Office 365, but was not able to find out a solution. any answers?

    Read the article

  • Windows PC's Intermittant Network faults.

    - by Kristiaan
    Hello everyone, im running into some issues with our client PC's (windows xp sp3 systems). this morning we ran into some problems with PC's not connecting to internal / external systems intermittantly. this would manifest as a problem connecting to any service, email, web, backoffice database systems etc. given a random amount of time be it a few minutes etc the problem would disapear and the pc would carry on as normal, some systems however have not been able to connect to certain sytems since the problem initally happened. im hoping for some suggestions / network diag advice really to help me locate the cause of this problem. all the clients are windows xp, connecting to a domain controller that is windows 2003 std this server also acts as a DNS server for us. we also have websense 7.0.1 installed on it to filter traffic.

    Read the article

  • rsnapshot stats

    - by Obscur Moirage
    I'd like to retrieve the following stats from rsnapshot files synced added files modded files deleted files Is there a feature to retrieve these in rsnapshot, or is there another product that's able to do it? EDIT: As requested, I'll try to show that I'm not just asking what I want to do without any research. I wasn't able to locate any rsnapshot feature doing this. Maybe I'm searching in a wrong direction. So, I've built a not very pretty script, called each time before rsnapshot is ran. This Perl script stores each file MD5, in order to compare backup files structures between rsnapshot updates. I'm pretty sure it's worthless to show this code here. I think that keeping an eye on what change on a server, for example, is a useful feature. So, I'm asking. @pauska Most of the time, I'm trying to search for an answer myself, which is not the case here. Thanks

    Read the article

  • iTunes + External Hard Drive problem

    - by Samwho
    Okay, so I've always stored my music on my external hard drive and run it from there with iTunes. Recently, however, it's being a little awkward. I think it was because I accidentally tried to run a song off my hard drive when it wasn't plugged in and, as would be expected, it said it couldn't find it. So I plug the hard drive in, locate the file and off it goes. But now it won't find any of the files... When I go to the "Get Info" page on the right click menu on a song I notice it has prepended file://localhost/ to everything, so my paths look like this: "file://localhost/E:/Sam/Media/Music/[song name]" I went into the iTunes Music Library.xml file and did a search and replace for file://localhost/ and replaced it with nothing and tried opening iTunes again and it just added file://localhost/ to every file again! Anyone have any idea why it does this and how to fix it without reimporting my library?

    Read the article

  • Cannot access Samba Share that is on Linux

    - by doug
    I have 3 virtual machines; Windows Server 2012, Windows 8, and CentOS Linux. The Server is configured with active domain. The CentOS VM has a Samba Share which has rights for the domain Administrator. Now, the Windows Server 2012 DC can successfully locate the share, but cannot access it (with Admin) ? Is it not possible for the Server to have access to it has Domain Client Admin, not Server Admin ? Hope this is clear? Thanks

    Read the article

  • centos 6 nfs: logs not showing anywhere

    - by ancillary
    Can someone please tell me where NFS logs in centos 6? Or perhaps where I can tell NFS to send logs? At the present time, there appears to be no such setting. Trying to get the thing to work without logs is quite frustrating. [root@houston netshare]# locate nfs| grep log [root@houston netshare]# [root@houston netshare]# grep -Rni "nfs" /var/log /var/log/anaconda.storage.log:23:20:41:33,962 DEBUG : registered device format class NFS as nfs /var/log/anaconda.storage.log:24:20:41:33,962 DEBUG : registered device format class NFSv4 as nfs4 This is a day-old centos 6 install from livecd and yum update has been run.

    Read the article

  • Upgrading Fedora on Amazon to 12 but getting libssl.so.* & libcrypto.so.* are missing

    - by bateman_ap
    I am upgrading to Fedora 12 on a Amazon EC2 using help here: http://www.ioncannon.net/system-administration/894/fedora-12-bootable-root-ebs-on-ec2/ I managed to do a 64 bit instance OK, however facing some problems with a standard one. On the final bit of the install from 11 to 12 I am getting an error: Error: Missing Dependency: libcrypto.so.8 is needed by package httpd-tools-2.2.1.5-1.fc11.1.i586 (installed) Error: Missing Dependency: libssl.so.8 is needed by package httpd-tools-2.2.1.5-1.fc11.1.i586 (installed) This is referenced in the comments from the link above but all it says is: Q: Apache failed, or libssl.so.* & libcrypto.so.* are missing A: These versions are mssing the symlinks they require. Easy fix, go symlink them to the newest versions in /lib However I am afraid I don't know how to do this. If it is any help I tried running the command locate libssl.so and got: /lib/libssl.so.0.9.8b /lib/libssl.so.6

    Read the article

  • Audible Books does not install my books into my iTunes and wants me to do it manually, I can't figure out how

    - by Alice
    Audible Books fails to install into iTunes I am using a desktop with Windows 7 64 bit. I have been downloading Audible Books for 3 years and have 85 installed. Several months ago downloading them did not put them in iTunes and the system wants me to import them manually. You start with "C\Program Files\iTunes\ and add two lines..... I know I need to choose the destination for 64 bit, but I do not see iTunes and I do not know how to put this title into iTunes if I can locate it? The folks at Audible wasted a lot of my time but were zero help! How can I get these books into my computer?

    Read the article

  • Apache Key: Which is it using?

    - by quindraco
    I'm running an Apache server on Ubuntu. When I restart it, it asks me for a pass phrase; here's what the dialog looks like: Apache/2.2.16 mod_ssl/2.2.16 (Pass Phrase Dialog) Some of your private key files are encrypted for security reasons. In order to read them you have to provide the pass phrases. Server 127.0.0.1:443 (RSA) Enter pass phrase: I've already worked out how to remove the pass phrase from the key file in question, but I can't find any information anywhere on how to determine which key file Apache is complaining about in the above dialog. I have dozens of key files on the server in question, although I don't know which ones are in active use (all I did is 'locate .pem' and ignore the false positives). Does anyone know how to track down which pem file I need to remove the passphrase from?

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >