panic transmit - Page 25

Problem calling linux C code from FIQ handler

- by fastmonkeywheels

I'm working on an armv6 core and have an FIQ hander that works great when I do all of my work in it. However I need to branch to some additional code that's too large for the FIQ memory area. The FIQ handler gets copied from fiq_start to fiq_end to 0xFFFF001C when registered static void test_fiq_handler(void) { asm volatile("\ .global fiq_start\n\ fiq_start:"); // clear gpio irq asm("ldr r10, GPIO_BASE_ISR"); asm("ldr r9, [r10]"); asm("orr r9, #0x04"); asm("str r9, [r10]"); // clear force register asm("ldr r10, AVIC_BASE_INTFRCH"); asm("ldr r9, [r10]"); asm("mov r9, #0"); asm("str r9, [r10]"); // prepare branch register asm(" ldr r11, fiq_handler"); // save all registers, build sp and branch to C asm(" adr r9, regpool"); asm(" stmia r9, {r0 - r8, r14}"); asm(" adr sp, fiq_sp"); asm(" ldr sp, [sp]"); asm(" add lr, pc,#4"); asm(" mov pc, r11"); #if 0 asm("ldr r10, IOMUX_ADDR12"); asm("ldr r9, [r10]"); asm("orr r9, #0x08 @ top/vertex LED"); asm("str r9,[r10] @turn on LED"); asm("bic r9, #0x08 @ top/vertex LED"); asm("str r9,[r10] @turn on LED"); #endif asm(" adr r9, regpool"); asm(" ldmia r9, {r0 - r8, r14}"); // return asm("subs pc, r14, #4"); asm("IOMUX_ADDR12: .word 0xFC2A4000"); asm("AVIC_BASE_INTCNTL: .word 0xFC400000"); asm("AVIC_BASE_INTENNUM: .word 0xFC400008"); asm("AVIC_BASE_INTDISNUM: .word 0xFC40000C"); asm("AVIC_BASE_FIVECSR: .word 0xFC400044"); asm("AVIC_BASE_INTFRCH: .word 0xFC400050"); asm("GPIO_BASE_ISR: .word 0xFC2CC018"); asm(".globl fiq_handler"); asm("fiq_sp: .long fiq_stack+120"); asm("fiq_handler: .long 0"); asm("regpool: .space 40"); asm(".pool"); asm(".align 5"); asm("fiq_stack: .space 124"); asm(".global fiq_end"); asm("fiq_end:"); } fiq_hander gets set to the following function: static void fiq_flip_pins(void) { asm("ldr r10, IOMUX_ADDR12_k"); asm("ldr r9, [r10]"); asm("orr r9, #0x08 @ top/vertex LED"); asm("str r9,[r10] @turn on LED"); asm("bic r9, #0x08 @ top/vertex LED"); asm("str r9,[r10] @turn on LED"); asm("IOMUX_ADDR12_k: .word 0xFC2A4000"); } EXPORT_SYMBOL(fiq_flip_pins); I know that since the FIQ handler operates outside of any normal kernel API's and that it is a rather high priority interrupt I must ensure that whatever I call is already swapped into memory. I do this by having the fiq_flip_pins function defined in the monolithic kernel and not as a module which gets vmalloc. If I don't branch to the fiq_flip_pins function, and instead do the work in the test_fiq_handler function everything works as expected. It's the branching that's causing me problems at the moment. Right after branching I get a kernel panic about a paging request. I don't understand why I'm getting the paging request. fiq_flip_pins is in the kernel at: c00307ec t fiq_flip_pins Unable to handle kernel paging request at virtual address 736e6f63 pgd = c3dd0000 [736e6f63] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT Modules linked in: hello_1 CPU: 0 Not tainted (2.6.31-207-g7286c01-svn4 #122) PC is at strnlen+0x10/0x28 LR is at string+0x38/0xcc pc : [<c016b004>] lr : [<c016c754>] psr: a00001d3 sp : c3817ea0 ip : 736e6f63 fp : 00000400 r10: c03cab5c r9 : c0339ae0 r8 : 736e6f63 r7 : c03caf5c r6 : c03cab6b r5 : ffffffff r4 : 00000000 r3 : 00000004 r2 : 00000000 r1 : ffffffff r0 : 736e6f63 Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment user Control: 00c5387d Table: 83dd0008 DAC: 00000015 Process sh (pid: 1663, stack limit = 0xc3816268) Stack: (0xc3817ea0 to 0xc3818000) Since there are no API calls in my code I have to assume that something is going wrong in the C call and back. Any help solving this is appreciated.

Read the article

problems in trying ieee 802.15.4 working from msk

- by asel

Hi, i took a msk code from dsplog.com and tried to modify it to test the ieee 802.15.4. There are several links on that site for ieee 802.15.4. Currently I am getting simulated ber results all approximately same for all the cases of Eb_No values. Can you help me to find why? thanks in advance! clear PN = [ 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0; 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0; 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0; 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1; 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1; 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0; 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1; 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1; 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1; 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1; 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1; 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0; 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0; 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1; 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0; 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0; ]; N = 5*10^5; % number of bits or symbols fsHz = 1; % sampling period T = 4; % symbol duration Eb_N0_dB = [0:10]; % multiple Eb/N0 values ct = cos(pi*[-T:N*T-1]/(2*T)); st = sin(pi*[-T:N*T-1]/(2*T)); for ii = 1:length(Eb_N0_dB) tx = []; % MSK Transmitter ipBit = round(rand(1,N/32)*15); for k=1:length(ipBit) sym = ipBit(k); tx = [tx PN((sym+1),1:end)]; end ipMod = 2*tx - 1; % BPSK modulation 0 -> -1, 1 -> 1 ai = kron(ipMod(1:2:end),ones(1,2*T)); % even bits aq = kron(ipMod(2:2:end),ones(1,2*T)); % odd bits ai = [ai zeros(1,T) ]; % padding with zero to make the matrix dimension match aq = [zeros(1,T) aq ]; % adding delay of T for Q-arm % MSK transmit waveform xt = 1/sqrt(T)*[ai.*ct + j*aq.*st]; % Additive White Gaussian Noise nt = 1/sqrt(2)*[randn(1,N*T+T) + j*randn(1,N*T+T)]; % white gaussian noise, 0dB variance % Noise addition yt = xt + 10^(-Eb_N0_dB(ii)/20)*nt; % additive white gaussian noise % MSK receiver % multiplying with cosine and sine waveforms xE = conv(real(yt).*ct,ones(1,2*T)); xO = conv(imag(yt).*st,ones(1,2*T)); bHat = zeros(1,N); bHat(1:2:end) = xE(2*T+1:2*T:end-2*T); % even bits bHat(2:2:end) = xO(3*T+1:2*T:end-T); % odd bits result=zeros(16,1); chiplen=32; seqstart=1; recovered = []; while(seqstart<length(bHat)) A = bHat(seqstart:seqstart+(chiplen-1)); for j=1:16 B = PN(j,1:end); result(j)=sum(A.*B); end [value,index] = max(result); recovered = [recovered (index-1)]; seqstart = seqstart+chiplen; end; %# create binary string - the 4 forces at least 4 bits bstr1 = dec2bin(ipBit,4); bstr2 = dec2bin(recovered,4); %# convert back to numbers (reshape so that zeros are preserved) out1 = str2num(reshape(bstr1',[],1))'; out2 = str2num(reshape(bstr2',[],1))'; % counting the errors nErr(ii) = size(find([out1 - out2]),2); end nErr/(length(ipBit)*4) % simulated ber theoryBer = 0.5*erfc(sqrt(10.^(Eb_N0_dB/10))) % theoretical ber

Read the article

1136: Incorrect number of arguments. Expected 0.? AS3 Flash Cs4 (Round 2)

- by charmaine

(I have asked this before but I dont think I was direct enough with my question and therefore it did not get resolved so here goes again!) I am working through a book called Foundation Actionscript 3.0 Animation, making things move. I am now on Chapter 9 - Collision Detection. On two lines of my code I get the 1135 error, letting me know that I have an incorrect number of arguments. I have highlighted the two areas in which this occurs with asterisks: package { import flash.display.Sprite; import flash.events.Event; public class Bubbles extends Sprite { private var balls:Array; private var numBalls:Number = 10; private var centerBall:Ball; private var bounce:Number = -1; private var spring:Number = 0.2; public function Bubbles() { init(); } private function init():void { balls = new Array(); ***centerBall = new Ball(100, 0xcccccc);*** addChild(centerBall); centerBall.x = stage.stageWidth / 2; centerBall.y = stage.stageHeight / 2; for(var i:uint = 0; i < numBalls; i++) { ***var ball:Ball = new Ball(Math.random() * 40 + 5, Math.random() * 0xffffff);*** ball.x = Math.random() * stage.stageWidth; ball.y = Math.random() * stage.stageHeight; ball.vx = Math.random() * 6 - 3; ball.vy = Math.random() * 6 - 3; addChild(ball); balls.push(ball); } addEventListener(Event.ENTER_FRAME, onEnterFrame); } private function onEnterFrame(event:Event):void { for(var i:uint = 0; i < numBalls; i++) { var ball:Ball = balls[i]; move(ball); var dx:Number = ball.x - centerBall.x; var dy:Number = ball.y - centerBall.y; var dist:Number = Math.sqrt(dx * dx + dy * dy); var minDist:Number = ball.radius + centerBall.radius; if(dist < minDist) { var angle:Number = Math.atan2(dy, dx); var tx:Number = centerBall.x + Math.cos(angle) * minDist; var ty:Number = centerBall.y + Math.sin(angle) * minDist; ball.vx += (tx - ball.x) * spring; ball.vy += (ty - ball.y) * spring; } } } private function move(ball:Ball):void { ball.x += ball.vx; ball.y += ball.vy; if(ball.x + ball.radius > stage.stageWidth) { ball.x = stage.stageWidth - ball.radius; ball.vx *= bounce; } else if(ball.x - ball.radius < 0) { ball.x = ball.radius; ball.vx *= bounce; } if(ball.y + ball.radius > stage.stageHeight) { ball.y = stage.stageHeight - ball.radius; ball.vy *= bounce; } else if(ball.y - ball.radius < 0) { ball.y = ball.radius; ball.vy *= bounce; } } } } I think this is due to the non-existance of a Ball.as, when reading the tutorial I assumed it meant that I had to create a movie clip of a ball on stage and then export it for actionscript with the class name being Ball, however when flicking back through the book I saw that a Ball.as already existed, stating that I may need to use this again later on in the book, this read: package { import flash.display.Sprite; public class Ball extends Sprite { private var radius:Number; private var color:uint; public var vx:Number=0; public var vy:Number=0; public function Ball(radius:Number=40, color:uint=0xff0000) { this.radius=radius; this.color=color; init(); } public function init():void { graphics.beginFill(color); graphics.drawCircle(0, 0, radius); graphics.endFill(); } } } This managed to stop all the errors appearing however, it did not transmit any of the effects from Bubbles.as it just braught a Red Ball on the center of the stage. How would I alter this code in order to work in favour of Bubbles.as? Please Help! Thanks!

Read the article

Microsoft and jQuery

- by Rick Strahl

The jQuery JavaScript library has been steadily getting more popular and with recent developments from Microsoft, jQuery is also getting ever more exposure on the ASP.NET platform including now directly from Microsoft. jQuery is a light weight, open source DOM manipulation library for JavaScript that has changed how many developers think about JavaScript. You can download it and find more information on jQuery on www.jquery.com. For me jQuery has had a huge impact on how I develop Web applications and was probably the main reason I went from dreading to do JavaScript development to actually looking forward to implementing client side JavaScript functionality. It has also had a profound impact on my JavaScript skill level for me by seeing how the library accomplishes things (and often reviewing the terse but excellent source code). jQuery made an uncomfortable development platform (JavaScript + DOM) a joy to work on. Although jQuery is by no means the only JavaScript library out there, its ease of use, small size, huge community of plug-ins and pure usefulness has made it easily the most popular JavaScript library available today. As a long time jQuery user, I’ve been excited to see the developments from Microsoft that are bringing jQuery to more ASP.NET developers and providing more integration with jQuery for ASP.NET’s core features rather than relying on the ASP.NET AJAX library. Microsoft and jQuery – making Friends jQuery is an open source project but in the last couple of years Microsoft has really thrown its weight behind supporting this open source library as a supported component on the Microsoft platform. When I say supported I literally mean supported: Microsoft now offers actual tech support for jQuery as part of their Product Support Services (PSS) as jQuery integration has become part of several of the ASP.NET toolkits and ships in several of the default Web project templates in Visual Studio 2010. The ASP.NET MVC 3 framework (still in Beta) also uses jQuery for a variety of client side support features including client side validation and we can look forward toward more integration of client side functionality via jQuery in both MVC and WebForms in the future. In other words jQuery is becoming an optional but included component of the ASP.NET platform. PSS support means that support staff will answer jQuery related support questions as part of any support incidents related to ASP.NET which provides some piece of mind to some corporate development shops that require end to end support from Microsoft. In addition to including jQuery and supporting it, Microsoft has also been getting involved in providing development resources for extending jQuery’s functionality via plug-ins. Microsoft’s last version of the Microsoft Ajax Library – which is the successor to the native ASP.NET AJAX Library – included some really cool functionality for client templates, databinding and localization. As it turns out Microsoft has rebuilt most of that functionality using jQuery as the base API and provided jQuery plug-ins of these components. Very recently these three plug-ins were submitted and have been approved for inclusion in the official jQuery plug-in repository and been taken over by the jQuery team for further improvements and maintenance. Even more surprising: The jQuery-templates component has actually been approved for inclusion in the next major update of the jQuery core in jQuery V1.5, which means it will become a native feature that doesn’t require additional script files to be loaded. Imagine this – an open source contribution from Microsoft that has been accepted into a major open source project for a core feature improvement. Microsoft has come a long way indeed! What the Microsoft Involvement with jQuery means to you For Microsoft jQuery support is a strategic decision that affects their direction in client side development, but nothing stopped you from using jQuery in your applications prior to Microsoft’s official backing and in fact a large chunk of developers did so readily prior to Microsoft’s announcement. Official support from Microsoft brings a few benefits to developers however. jQuery support in Visual Studio 2010 means built-in support for jQuery IntelliSense, automatically added jQuery scripts in many projects types and a common base for client side functionality that actually uses what most developers are already using. If you have already been using jQuery and were worried about straying from the Microsoft line and their internal Microsoft Ajax Library – worry no more. With official support and the change in direction towards jQuery Microsoft is now following along what most in the ASP.NET community had already been doing by using jQuery, which is likely the reason for Microsoft’s shift in direction in the first place. ASP.NET AJAX and the Microsoft AJAX Library weren’t bad technology – there was tons of useful functionality buried in these libraries. However, these libraries never got off the ground, mainly because early incarnations were squarely aimed at control/component developers rather than application developers. For all the functionality that these controls provided for control developers they lacked in useful and easily usable application developer functionality that was easily accessible in day to day client side development. The result was that even though Microsoft shipped support for these tools in the box (in .NET 3.5 and 4.0), other than for the internal support in ASP.NET for things like the UpdatePanel and the ASP.NET AJAX Control Toolkit as well as some third party vendors, the Microsoft client libraries were largely ignored by the developer community opening the door for other client side solutions. Microsoft seems to be acknowledging developer choice in this case: Many more developers were going down the jQuery path rather than using the Microsoft built libraries and there seems to be little sense in continuing development of a technology that largely goes unused by the majority of developers. Kudos for Microsoft for recognizing this and gracefully changing directions. Note that even though there will be no further development in the Microsoft client libraries they will continue to be supported so if you’re using them in your applications there’s no reason to start running for the exit in a panic and start re-writing everything with jQuery. Although that might be a reasonable choice in some cases, jQuery and the Microsoft libraries work well side by side so that you can leave existing solutions untouched even as you enhance them with jQuery. The Microsoft jQuery Plug-ins – Solid Core Features One of the most interesting developments in Microsoft’s embracing of jQuery is that Microsoft has started contributing to jQuery via standard mechanism set for jQuery developers: By submitting plug-ins. Microsoft took some of the nicest new features of the unpublished Microsoft Ajax Client Library and re-wrote these components for jQuery and then submitted them as plug-ins to the jQuery plug-in repository. Accepted plug-ins get taken over by the jQuery team and that’s exactly what happened with the three plug-ins submitted by Microsoft with the templating plug-in even getting slated to be published as part of the jQuery core in the next major release (1.5). The following plug-ins are provided by Microsoft: jQuery Templates – a client side template rendering engine jQuery Data Link – a client side databinder that can synchronize changes without code jQuery Globalization – provides formatting and conversion features for dates and numbers The first two are ports of functionality that was slated for the Microsoft Ajax Library while functionality for the globalization library provides functionality that was already found in the original ASP.NET AJAX library. To me all three plug-ins address a pressing need in client side applications and provide functionality I’ve previously used in other incarnations, but with more complete implementations. Let’s take a close look at these plug-ins. jQuery Templates http://api.jquery.com/category/plugins/templates/ Client side templating is a key component for building rich JavaScript applications in the browser. Templating on the client lets you avoid from manually creating markup by creating DOM nodes and injecting them individually into the document via code. Rather you can create markup templates – similar to the way you create classic ASP server markup – and merge data into these templates to render HTML which you can then inject into the document or replace existing content with. Output from templates are rendered as a jQuery matched set and can then be easily inserted into the document as needed. Templating is key to minimize client side code and reduce repeated code for rendering logic. Instead a single template can be used in many places for updating and adding content to existing pages. Further if you build pure AJAX interfaces that rely entirely on client rendering of the initial page content, templates allow you to a use a single markup template to handle all rendering of each specific HTML section/element. I’ve used a number of different client rendering template engines with jQuery in the past including jTemplates (a PHP style templating engine) and a modified version of John Resig’s MicroTemplating engine which I built into my own set of libraries because it’s such a commonly used feature in my client side applications. jQuery templates adds a much richer templating model that allows for sub-templates and access to the data items. Like John Resig’s original Micro Template engine, the core basics of the templating engine create JavaScript code which means that templates can include JavaScript code. To give you a basic idea of how templates work imagine I have an application that downloads a set of stock quotes based on a symbol list then displays them in the document. To do this you can create an ‘item’ template that describes how each of the quotes is renderd as a template inside of the document: <script id="stockTemplate" type="text/x-jquery-tmpl"> <div id="divStockQuote" class="errordisplay" style="width: 500px;"> <div class="label">Company:</div><div><b>${Company}(${Symbol})</b></div> <div class="label">Last Price:</div><div>${LastPrice}</div> <div class="label">Net Change:</div><div> {{if NetChange > 0}} <b style="color:green" >${NetChange}</b> {{else}} <b style="color:red" >${NetChange}</b> {{/if}} </div> <div class="label">Last Update:</div><div>${LastQuoteTimeString}</div> </div> </script> The ‘template’ is little more than HTML with some markup expressions inside of it that define the template language. Notice the embedded ${} expressions which reference data from the quote objects returned from an AJAX call on the server. You can embed any JavaScript or value expression in these template expressions. There are also a number of structural commands like {{if}} and {{each}} that provide for rudimentary logic inside of your templates as well as commands ({{tmpl}} and {{wrap}}) for nesting templates. You can find more about the full set of markup expressions available in the documentation. To load up this data you can use code like the following: <script type="text/javascript"> //var Proxy = new ServiceProxy("../PageMethods/PageMethodsService.asmx/"); $(document).ready(function () { $("#btnGetQuotes").click(GetQuotes); }); function GetQuotes() { var symbols = $("#txtSymbols").val().split(","); $.ajax({ url: "../PageMethods/PageMethodsService.asmx/GetStockQuotes", data: JSON.stringify({ symbols: symbols }), // parameter map type: "POST", // data has to be POSTed contentType: "application/json", timeout: 10000, dataType: "json", success: function (result) { var quotes = result.d; var jEl = $("#stockTemplate").tmpl(quotes); $("#quoteDisplay").empty().append(jEl); }, error: function (xhr, status) { alert(status + "\r\n" + xhr.responseText); } }); }; </script> In this case an ASMX AJAX service is called to retrieve the stock quotes. The service returns an array of quote objects. The result is returned as an object with the .d property (in Microsoft service style) that returns the actual array of quotes. The template is applied with: var jEl = $("#stockTemplate").tmpl(quotes); which selects the template script tag and uses the .tmpl() function to apply the data to it. The result is a jQuery matched set of elements that can then be appended to the quote display element in the page. The template is merged against an array in this example. When the result is an array the template is automatically applied to each each array item. If you pass a single data item – like say a stock quote – the template works exactly the same way but is applied only once. Templates also have access to a $data item which provides the current data item and information about the tempalte that is currently executing. This makes it possible to keep context within the context of the template itself and also to pass context from a parent template to a child template which is very powerful. Templates can be evaluated by using the template selector and calling the .tmpl() function on the jQuery matched set as shown above or you can use the static $.tmpl() function to provide a template as a string. This allows you to dynamically create templates in code or – more likely – to load templates from the server via AJAX calls. In short there are options The above shows off some of the basics, but there’s much for functionality available in the template engine. Check the documentation link for more information and links to additional examples. The plug-in download also comes with a number of examples that demonstrate functionality. jQuery templates will become a native component in jQuery Core 1.5, so it’s definitely worthwhile checking out the engine today and get familiar with this interface. As much as I’m stoked about templating becoming part of the jQuery core because it’s such an integral part of many applications, there are also a couple shortcomings in the current incarnation: Lack of Error Handling Currently if you embed an expression that is invalid it’s simply not rendered. There’s no error rendered into the template nor do the various template functions throw errors which leaves finding of bugs as a runtime exercise. I would like some mechanism – optional if possible – to be able to get error info of what is failing in a template when it’s rendered. No String Output Templates are always rendered into a jQuery matched set and there’s no way that I can see to directly render to a string. String output can be useful for debugging as well as opening up templating for creating non-HTML string output. Limited JavaScript Access Unlike John Resig’s original MicroTemplating Engine which was entirely based on JavaScript code generation these templates are limited to a few structured commands that can ‘execute’. There’s no code execution inside of script code which means you’re limited to calling expressions available in global objects or the data item passed in. This may or may not be a big deal depending on the complexity of your template logic. Error handling has been discussed quite a bit and it’s likely there will be some solution to that particualar issue by the time jQuery templates ship. The others are relatively minor issues but something to think about anyway. jQuery Data Link http://api.jquery.com/category/plugins/data-link/ jQuery Data Link provides the ability to do two-way data binding between input controls and an underlying object’s properties. The typical scenario is linking a textbox to a property of an object and have the object updated when the text in the textbox is changed and have the textbox change when the value in the object or the entire object changes. The plug-in also supports converter functions that can be applied to provide the conversion logic from string to some other value typically necessary for mapping things like textbox string input to say a number property and potentially applying additional formatting and calculations. In theory this sounds great, however in reality this plug-in has some serious usability issues. Using the plug-in you can do things like the following to bind data: person = { firstName: "rick", lastName: "strahl"}; $(document).ready( function() { // provide for two-way linking of inputs $("form").link(person); // bind to non-input elements explicitly $("#objFirst").link(person, { firstName: { name: "objFirst", convertBack: function (value, source, target) { $(target).text(value); } } }); $("#objLast").link(person, { lastName: { name: "objLast", convertBack: function (value, source, target) { $(target).text(value); } } }); }); This code hooks up two-way linking between a couple of textboxes on the page and the person object. The first line in the .ready() handler provides mapping of object to form field with the same field names as properties on the object. Note that .link() does NOT bind items into the textboxes when you call .link() – changes are mapped only when values change and you move out of the field. Strike one. The two following commands allow manual binding of values to specific DOM elements which is effectively a one-way bind. You specify the object and a then an explicit mapping where name is an ID in the document. The converter is required to explicitly assign the value to the element. Strike two. You can also detect changes to the underlying object and cause updates to the input elements bound. Unfortunately the syntax to do this is not very natural as you have to rely on the jQuery data object. To update an object’s properties and get change notification looks like this: function updateFirstName() { $(person).data("firstName", person.firstName + " (code updated)"); } This works fine in causing any linked fields to be updated. In the bindings above both the firstName input field and objFirst DOM element gets updated. But the syntax requires you to use a jQuery .data() call for each property change to ensure that the changes are tracked properly. Really? Sure you’re binding through multiple layers of abstraction now but how is that better than just manually assigning values? The code savings (if any) are going to be minimal. As much as I would like to have a WPF/Silverlight/Observable-like binding mechanism in client script, this plug-in doesn’t help much towards that goal in its current incarnation. While you can bind values, the ‘binder’ is too limited to be really useful. If initial values can’t be assigned from the mappings you’re going to end up duplicating work loading the data using some other mechanism. There’s no easy way to re-bind data with a different object altogether since updates trigger only through the .data members. Finally, any non-input elements have to be bound via code that’s fairly verbose and frankly may be more voluminous than what you might write by hand for manual binding and unbinding. Two way binding can be very useful but it has to be easy and most importantly natural. If it’s more work to hook up a binding than writing a couple of lines to do binding/unbinding this sort of thing helps very little in most scenarios. In talking to some of the developers the feature set for Data Link is not complete and they are still soliciting input for features and functionality. If you have ideas on how you want this feature to be more useful get involved and post your recommendations. As it stands, it looks to me like this component needs a lot of love to become useful. For this component to really provide value, bindings need to be able to be refreshed easily and work at the object level, not just the property level. It seems to me we would be much better served by a model binder object that can perform these binding/unbinding tasks in bulk rather than a tool where each link has to be mapped first. I also find the choice of creating a jQuery plug-in questionable – it seems a standalone object – albeit one that relies on the jQuery library – would provide a more intuitive interface than the current forcing of options onto a plug-in style interface. Out of the three Microsoft created components this is by far the least useful and least polished implementation at this point. jQuery Globalization http://github.com/jquery/jquery-global Globalization in JavaScript applications often gets short shrift and part of the reason for this is that natively in JavaScript there’s little support for formatting and parsing of numbers and dates. There are a number of JavaScript libraries out there that provide some support for globalization, but most are limited to a particular portion of globalization. As .NET developers we’re fairly spoiled by the richness of APIs provided in the framework and when dealing with client development one really notices the lack of these features. While you may not necessarily need to localize your application the globalization plug-in also helps with some basic tasks for non-localized applications: Dealing with formatting and parsing of dates and time values. Dates in particular are problematic in JavaScript as there are no formatters whatsoever except the .toString() method which outputs a verbose and next to useless long string. With the globalization plug-in you get a good chunk of the formatting and parsing functionality that the .NET framework provides on the server. You can write code like the following for example to format numbers and dates: var date = new Date(); var output = $.format(date, "MMM. dd, yy") + "\r\n" + $.format(date, "d") + "\r\n" + // 10/25/2010 $.format(1222.32213, "N2") + "\r\n" + $.format(1222.33, "c") + "\r\n"; alert(output); This becomes even more useful if you combine it with templates which can also include any JavaScript expressions. Assuming the globalization plug-in is loaded you can create template expressions that use the $.format function. Here’s the template I used earlier for the stock quote again with a couple of formats applied: <script id="stockTemplate" type="text/x-jquery-tmpl"> <div id="divStockQuote" class="errordisplay" style="width: 500px;"> <div class="label">Company:</div><div><b>${Company}(${Symbol})</b></div> <div class="label">Last Price:</div> <div>${$.format(LastPrice,"N2")}</div> <div class="label">Net Change:</div><div> {{if NetChange > 0}} <b style="color:green" >${NetChange}</b> {{else}} <b style="color:red" >${NetChange}</b> {{/if}} </div> <div class="label">Last Update:</div> <div>${$.format(LastQuoteTime,"MMM dd, yyyy")}</div> </div> </script> There are also parsing methods that can parse dates and numbers from strings into numbers easily: alert($.parseDate("25.10.2010")); alert($.parseInt("12.222")); // de-DE uses . for thousands separators As you can see culture specific options are taken into account when parsing. The globalization plugin provides rich support for a variety of locales: Get a list of all available cultures Query cultures for culture items (like currency symbol, separators etc.) Localized string names for all calendar related items (days of week, months) Generated off of .NET’s supported locales In short you get much of the same functionality that you already might be using in .NET on the server side. The plugin includes a huge number of locales and an Globalization.all.min.js file that contains the text defaults for each of these locales as well as small locale specific script files that define each of the locale specific settings. It’s highly recommended that you NOT use the huge globalization file that includes all locales, but rather add script references to only those languages you explicitly care about. Overall this plug-in is a welcome helper. Even if you use it with a single locale (like en-US) and do no other localization, you’ll gain solid support for number and date formatting which is a vital feature of many applications. Changes for Microsoft It’s good to see Microsoft coming out of its shell and away from the ‘not-built-here’ mentality that has been so pervasive in the past. It’s especially good to see it applied to jQuery – a technology that has stood in drastic contrast to Microsoft’s own internal efforts in terms of design, usage model and… popularity. It’s great to see that Microsoft is paying attention to what customers prefer to use and supporting the customer sentiment – even if it meant drastically changing course of policy and moving into a more open and sharing environment in the process. The additional jQuery support that has been introduced in the last two years certainly has made lives easier for many developers on the ASP.NET platform. It’s also nice to see Microsoft submitting proposals through the standard jQuery process of plug-ins and getting accepted for various very useful projects. Certainly the jQuery Templates plug-in is going to be very useful to many especially since it will be baked into the jQuery core in jQuery 1.5. I hope we see more of this type of involvement from Microsoft in the future. Kudos!© Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery ASP.NET

Read the article

webserver horrible slow, sometimes incredible fast

- by dhanke

i am running a small community ( 6000+ Members ) on a non-virtual 64-bit ubuntu 11.04 system. I am not a Linux-pro, not even advanced, i just tried to setup a webserver, which does nothing special actually. Delivering some dynamic PHP and RoR websites is its task. So it might be that my configuration files do look horrible bad. Also, i might use the wrong vocabulary, so in doubt, please ask. Having a current all-time record of 520 registered users (board-accounts, no system-users) online at same time, average server-load is about 2.0 - 5.0. Meantime (~250 users) average server load value is at about 0.4 - 0.8, sometimes, on some expensive searches a bit higher. everything fine. From time to time however, the load increases up to 120 (120.0, not 12.0 ;) ). In this time, its hard to even connect via SSH, but when i reach the server, and use top/htop/iotop to see whats happening, i cannot identify any process causing high CPU load. iotop tells me about a current reading/writing speed of about approx. 70kb/s, which is quite equal to power-off i think. Memory-Usage is max. at ~ 12GB of 16GB, so swap remains empty. now the odd (at least for me:) waiting some minutes ( since i always get a bit into a panic when this happens, it feels like 5 minutes, but i suppose its more like 20-30 minutes) and the server is back to normal. everything continues as normal. another odd fact: when i run hdparm -tT /dev/sda, i get answer like: /dev/sda: Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec when i run the same command while the server is "frozen", the answer is like /dev/sda: <- takes about 5 minutes until this line appears Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec <- 5 more minutes Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec <- another 5 minutes so the values are the same, but the quoted time is completely wrong. using time command as prefix also tells me that ~ 15 minutes were used. I searched in dmesg, /var/log/[messages|syslog] - nothing found. /var/log/errors however tells me that: Jul 4 20:28:30 localhost kernel: [19080.671415] INFO: task php5-fpm:27728 blocked for more than 120 seconds. Jul 4 20:28:30 localhost kernel: [19080.671419] "echo 0 /proc/sys/kernel/hung_task_timeout_secs" disables this message. multiple times. now that message does tell me that php5-fpm task was blocked or did block ? - but not if that is the cause or just one of the results of that "freeze". Anyone? to cut the long story short, i dont know where even to start analyzing. So if you can give me any advice by looking at following specs and configs, or ask me to provide more information, i`d be glad. Specs: 6 Core AMD Phenom(tm) II X6 1055T Processor * 16 Gigabyte Ram 2x 1.5 TB Seagate ST1500DL003-9VT16L via SATA 3 via SoftwareRaid (i suppose) Services: (due to service --status-all, those with [ + ]) nginx Webserver 1.0.14 mySQL 5.1.63 Server Ruby on Rails 2.3.11 ( passenger-nginx-module ) php5-fpm 5.3.6-13ubuntu3.7 SSH ido2db Further services: default crontab + nightly backup. syslog-ng Website consists of 2 subdomains, forum. and www. where forum is a phpBB3.x PHP-Board, and www a Ruby on Rails 2.3.11 application (portal). Mini-Note: sometimes i notice that the forum is pretty slow, in contrast to the always-fast (except for this "freeze") portal. Both share the same Database, but the portal is using it read-only. The Webserver is nginx, using phusion passenger module to communicate with the ruby-application. Also, for the forum it communicates with php5-fpm via socket: relevant nginx configuration parts ( with comments/questions starting by ; ) ; in case of freeze due to too high Filesystem activity, maybe adding a limit? #worker_rlimit_nofile 50000; user www-data; ; 6 cores, so i read 6 fits. maybe already wrong? worker_processes 6; pid /var/run/nginx.pid; events { worker_connections 1024; } http { passenger_root /var/lib/gems/1.8/gems/passenger-3.0.11; passenger_ruby /usr/bin/ruby1.8; ; the forum once featured a chat, which was working w/o websockets. ; so it was a hell of pull requests (deactivated now, freeze still happening) keepalive_timeout 65; keepalive_requests 50; gzip on; server { listen 80; server_name www.domain.tld; root /var/www/domain/rails/public; passenger_enabled on; } server { listen 80; server_name forum.domain.tld; location / { root /var/www/domain/forum; index index.php; } ; satic stuff to be handled by nginx location ~* ^/style/.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /var/www/domain/forum/; } ; now the php magic, note the "backend"-fcgi_pass location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/domain/forum$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_max_temp_file_size 0; } location ~ /\.ht { deny all; } } ;the php5-fpm socket. i read that /dev/shm/ whould be the fastes place for this. bad idea in general? upstream backend { server unix:/dev/shm/phpfpm; } ... } php5-fpm settings (i changed this values due to php5-fpm error log messages higher and higher.. (freeze-problem was there before as well)* listen = /dev/shm/phpfpm user = www-data group = www-data pm = dynamic ; holy, 4000! well, shinking this value to earth-level gave me ; 100s of 502 bad gateway commands. this values were quite stable. ; since there are only max 520 users online i dont get it, why i would need ; as many children as configured here. due to keep-alive maybe? ; asking questions is easier for me since restarting server will make ; my community-members angry ;) pm.max_children = 4000 pm.start_servers = 100 pm.min_spare_servers = 50 pm.max_spare_servers = 150 pm.max_requests = 10 pm.status_path = /status ping.path = /ping ping.response = pong slowlog = log/$pool.log.slow ;should i use rlimit? ;rlimit_files = 1024 chdir = / mysql/my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP ; high number, but less gives some phpBB errors. max_connections = 450 table_cache = 512 ; i read twice the cpu cores, bad? thread_concurrency = 12 join_buffer_size = 2084K concurrent_insert = 3 query_cache_limit = 64M query_cache_size = 512M query_cache_type = 1 log_error = /var/log/mysql/error.log log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 expire_logs_days = 10 max_binlog_size = 100M low_priority_updates=1 [mysqldump] quick quote-names max_allowed_packet = 16M [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/ I used smartctl already, hdds seem to be fine. /proc/mdstatus quotes: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sda3[1] 1459264192 blocks [2/1] [_U] md1 : active raid1 sda1[0] 3911680 blocks [2/1] [U_] unused devices: ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 127727 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 127727 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited I quote some questions in my configuration files, these are not (intentional) directly problem-related, but would be nice for me to know wether they are indeed questionable or done right. One additional Fact: my MYSQL-database is at 12GB size. i dont know if that does matter, but mytop sometimes shows me 4-5 seconds long insert queries, some are 20-30 seconds long. Its just a feeling that i am unable to prove (because i dont know how), but when i disable the database, the freeze seems not to happen. Example: i created a dummy rails application to see the development log. the app made some sql-queries, reads and inserts. the log quite often was like: DbTest Load (0.3ms) SELECT * FROM `db_test` WHERE (`db_test`.`id` = 31722) LIMIT 1 SQL (0.1ms) BEGIN DbTest Update (0.3ms) UPDATE `db_test` SET `updated_at` = '2012-07-04 23:32:34' WHERE `id` = 31722 - now the log stands still for 5-60 seconds. SQL (49.1ms) COMMIT - SQL-Update time in the log does not include freeze time Rendering test/index Completed in 96ms (View: 16, DB: 59) | 200 OK [http://localhost:9000/test] Bad part is: this mini-freeze here only happens from time to time as well. note: meanwhile i cannot even upload files via scp. I currently feel like running form bad to worse and back by googling for my server-problem due to immense lack of knowledge regarding server configurations. It still makes me wonder, why those problems even appear, since 250 users a time is not such a high amount, right? So my questions: whats wrong and how to fix? ;) or: what information can i provide to make the situation more clear? can you point at some critical bad configuration-line which i should consider to catch up in the documentation? are there any tools i can run to see some possible bottlenecks? any further advice? (next to: "pay someone who knows what he does" - its a private project, server costs enough already. :)) Thanks for your time and help. Best Regards, Daniel P.S.: i renamed the configfiles to domain.tld since i dont want to have any % more load to the server until its fixed. might be a exaggeratedly thought.. P.P.S: if i asked a complete duplicate question, sorry. my search results seemed to be quite specific in their own way.

Read the article

Set up linux box for secure local hosting a-z

- by microchasm

I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms Virtualhosts In the rssh section above I added a user to use for SFTP. In this users' home directory, I created a folder called 'https'. This is where the documents for this site will live, so I need to add a virtualhost that will point to it. I will use the above virtual interface for this site (herein called dev.site.local). vi /etc/http/conf/httpd.conf Add the following to the end of httpd.conf: <VirtualHost 192.168.1.3:80> ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> I put a dummy index.html file in the https directory just to check everything out. I tried browsing to it, and was met with permission denied errors. The logs only gave an obscure reference to what was going on: [Mon May 17 14:57:11 2010] [error] [client 192.168.1.100] (13)Permission denied: access to /index.html denied I tried chmod 777 et. al., but to no avail. Turns out, I needed to chmod+x the https directory and its' parent directories. chmod +x /home chmod +x /home/dev chmod +x /home/dev/https This solved that problem. DNS I'm handling DNS via our local Windows Server 2003 box. However, the CentOS documentation for BIND can be found here: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-bind.html SSL To get SSL working, I changed the following in httpd.conf: NameVirtualHost 192.168.1.3:443 #make sure this line is in httpd.conf <VirtualHost 192.168.1.3:443> #change port to 443 ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Unfortunately, I keep getting (Error code: ssl_error_rx_record_too_long) errors when trying to access a page with SSL. As JamesHannah gracefully pointed out below, I had not set up the locations of the certs in httpd.conf, and thusly was getting the page thrown at the broswer as the cert making the browser balk. So first, I needed to set up a CA and make certificate files. I found a great (if old) walkthrough on the process here: http://www.debian-administration.org/articles/284. Here are the relevant steps I took from that article: mkdir /home/CA cd /home/CA/ mkdir newcerts private echo '01' > serial touch index.txt #this and the above command are for the database that will keep track of certs Create an openssl.cnf file in the /home/CA/ dir and edit it per the walkthrough linked above. (For reference, my finished openssl.cnf file looked like this: http://pastebin.com/raw.php?i=hnZDij4T) openssl req -new -x509 -extensions v3_ca -keyout private/cakey.pem -out cacert.pem -days 3650 -config ./openssl.cnf #this creates the cacert.pem which gets distributed and imported to the browser(s) Modified openssl.cnf again per walkthrough instructions. openssl req -new -nodes -out dev.req.pem -config ./openssl.cnf #generates certificate request, and key.pem which I renamed dev.key.pem. Modified openssl.cnf again per walkthrough instructions. openssl ca -out dev.cert.pem -config ./openssl.cnf -infiles dev.req.pem #create and sign certificate. cp dev.cert.pem /home/dev/certs/cert.pem cp dev.key.pem /home/certs/key.pem I updated httpd.conf to reflect the certs and turn SSLEngine on: NameVirtualHost 192.168.1.3:443 <VirtualHost 192.168.1.3:443> ServerAdmin [email protected] DocumentRoot /home/dev/https SSLEngine on SSLCertificateFile /home/dev/certs/cert.pem SSLCertificateKeyFile /home/dev/certs/key.pem ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Put the CA cert.pem in a web-accessible place, and downloaded/imported it into my browser. Now I can visit https://dev.site.local with no errors or warnings. And this is where I'm at. I will keep editing this as I make progress. Any tips on how to configure SSL email would be appreciated.

Read the article

Building a better mouse-trap – Improving the creation of XML Message Requests using Reflection, XML & XSLT

- by paulschapman

Introduction The way I previously created messages to send to the GovTalk service I used the XMLDocument to create the request. While this worked it left a number of problems; not least that for every message a special function would need to created. This is OK for the short term but the biggest cost in any software project is maintenance and this would be a headache to maintain. So the following is a somewhat better way of achieving the same thing. For the purposes of this article I am going to be using the CompanyNumberSearch request of the GovTalk service – although this technique would work for any service that accepted XML. The C# functions which send and receive the messages remain the same. The magic sauce in this is the XSLT which defines the structure of the request, and the use of objects in conjunction with reflection to provide the content. It is a bit like Sweet Chilli Sauce added to Chicken on a bed of rice. So on to the Sweet Chilli Sauce The Sweet Chilli Sauce The request to search for a company based on it’s number is as follows; <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID>1</TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID>????????????????????????????????</SenderID> <Authentication> <Method>CHMD5</Method> <Value>????????????????????????????????</Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber>99999999</PartialCompanyNumber> <DataSet>LIVE</DataSet> <SearchRows>1</SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> This is the XML that we send to the GovTalk Service and we get back a list of companies that match the criteria passed A message is structured in two parts; The envelope which identifies the person sending the request, with the name of the request, and the body which gives the detail of the company we are looking for. The Chilli What makes it possible is the use of XSLT to define the message – and serialization to convert each request object into XML. To start we need to create an object which will represent the contents of the message we are sending. However there is a common properties in all the messages that we send to Companies House. These properties are as follows SenderId – the id of the person sending the message SenderPassword – the password associated with Id TransactionId – Unique identifier for the message AuthenticationValue – authenticates the request Because these properties are unique to the Companies House message, and because they are shared with all messages they are perfect candidates for a base class. The class is as follows; using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Security.Cryptography; using System.Text; using System.Text.RegularExpressions; using Microsoft.WindowsAzure.ServiceRuntime; namespace CompanyHub.Services { public class GovTalkRequest { public GovTalkRequest() { try { SenderID = RoleEnvironment.GetConfigurationSettingValue("SenderId"); SenderPassword = RoleEnvironment.GetConfigurationSettingValue("SenderPassword"); TransactionId = DateTime.Now.Ticks.ToString(); AuthenticationValue = EncodePassword(String.Format("{0}{1}{2}", SenderID, SenderPassword, TransactionId)); } catch (System.Exception ex) { throw ex; } } /// <summary> /// returns the Sender ID to be used when communicating with the GovTalk Service /// </summary> public String SenderID { get; set; } /// <summary> /// return the password to be used when communicating with the GovTalk Service /// </summary> public String SenderPassword { get; set; } // end SenderPassword /// <summary> /// Transaction Id - uses the Time and Date converted to Ticks /// </summary> public String TransactionId { get; set; } // end TransactionId /// <summary> /// calculate the authentication value that will be used when /// communicating with /// </summary> public String AuthenticationValue { get; set; } // end AuthenticationValue property /// <summary> /// encodes password(s) using MD5 /// </summary> /// <param name="clearPassword"></param> /// <returns></returns> public static String EncodePassword(String clearPassword) { MD5CryptoServiceProvider md5Hasher = new MD5CryptoServiceProvider(); byte[] hashedBytes; UTF32Encoding encoder = new UTF32Encoding(); hashedBytes = md5Hasher.ComputeHash(ASCIIEncoding.Default.GetBytes(clearPassword)); String result = Regex.Replace(BitConverter.ToString(hashedBytes), "-", "").ToLower(); return result; } } } There is nothing particularly clever here, except for the EncodePassword method which hashes the value made up of the SenderId, Password and Transaction id. Each message inherits from this object. So for the Company Number Search in addition to the properties above we need a partial number, which dataset to search – for the purposes of the project we only need to search the LIVE set so this can be set in the constructor and the SearchRows. Again all are set as properties. With the SearchRows and DataSet initialized in the constructor. public class CompanyNumberSearchRequest : GovTalkRequest, IDisposable { /// <summary> /// /// </summary> public CompanyNumberSearchRequest() : base() { DataSet = "LIVE"; SearchRows = 1; } /// <summary> /// Company Number to search against /// </summary> public String PartialCompanyNumber { get; set; } /// <summary> /// What DataSet should be searched for the company /// </summary> public String DataSet { get; set; } /// <summary> /// How many rows should be returned /// </summary> public int SearchRows { get; set; } public void Dispose() { DataSet = String.Empty; PartialCompanyNumber = String.Empty; DataSet = "LIVE"; SearchRows = 1; } } As well as inheriting from our base class, I have also inherited from IDisposable – not just because it is just plain good practice to dispose of objects when coding, but it gives also gives us more versatility when using the object. There are four stages in making a request and this is reflected in the four methods we execute in making a call to the Companies House service; Create a request Send a request Check the status If OK then get the results of the request I’ve implemented each of these stages within a static class called Toolbox – which also means I don’t need to create an instance of the class to use it. When making a request there are three stages; Get the template for the message Serialize the object representing the message Transform the serialized object using a predefined XSLT file. Each of my templates I have defined as an embedded resource. When retrieving a resource of this kind we have to include the full namespace to the resource. In making the code re-usable as much as possible I defined the full ‘path’ within the GetRequest method. requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); So we now have the full path of the file within the assembly. Now all we need do is retrieve the assembly and get the resource. asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); Once retrieved So this can be returned to the calling function and we now have a stream of XSLT to define the message. Time now to serialize the request to create the other side of this message. // Serialize object containing Request, Load into XML Document t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); First off we need the type of the object so we make a call to the GetType method of the object containing the Message properties. Next we need a MemoryStream, XmlSerializer and an XMLTextWriter so these can be initialized. The object is serialized by making the call to the Serialize method of the serializer object. The result of that is then converted into a MemoryStream. That MemoryStream is then converted into a string. ConvertByteArrayToString This is a fairly simple function which uses an ASCIIEncoding object found within the System.Text namespace to convert an array of bytes into a string. public static String ConvertByteArrayToString(byte[] bytes) { System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding(); return enc.GetString(bytes); } I only put it into a function because I will be using this in various places. The Sauce When adding support for other messages outside of creating a new object to store the properties of the message, the C# components do not need to change. It is in the XSLT file that the versatility of the technique lies. The XSLT file determines the format of the message. For the CompanyNumberSearch the XSLT file is as follows; <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="/"> <GovTalkMessage xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" > <EnvelopeVersion>1.0</EnvelopeVersion> <Header> <MessageDetails> <Class>NumberSearch</Class> <Qualifier>request</Qualifier> <TransactionID> <xsl:value-of select="CompanyNumberSearchRequest/TransactionId"/> </TransactionID> </MessageDetails> <SenderDetails> <IDAuthentication> <SenderID><xsl:value-of select="CompanyNumberSearchRequest/SenderID"/></SenderID> <Authentication> <Method>CHMD5</Method> <Value> <xsl:value-of select="CompanyNumberSearchRequest/AuthenticationValue"/> </Value> </Authentication> </IDAuthentication> </SenderDetails> </Header> <GovTalkDetails> <Keys/> </GovTalkDetails> <Body> <NumberSearchRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlgw.companieshouse.gov.uk/v1-0/schema/NumberSearch.xsd"> <PartialCompanyNumber> <xsl:value-of select="CompanyNumberSearchRequest/PartialCompanyNumber"/> </PartialCompanyNumber> <DataSet> <xsl:value-of select="CompanyNumberSearchRequest/DataSet"/> </DataSet> <SearchRows> <xsl:value-of select="CompanyNumberSearchRequest/SearchRows"/> </SearchRows> </NumberSearchRequest> </Body> </GovTalkMessage> </xsl:template> </xsl:stylesheet> The outer two tags define that this is a XSLT stylesheet and the root tag from which the nodes are searched for. The GovTalkMessage is the format of the message that will be sent to Companies House. We first set up the XslCompiledTransform object which will transform the XSLT template and the serialized object into the request to Companies House. xslt = new XslCompiledTransform(); resultStream = new MemoryStream(); writer = new XmlTextWriter(resultStream, Encoding.ASCII); doc = new XmlDocument(); The Serialize method require XmlTextWriter to write the XML (writer) and a stream to place the transferred object into (writer). The XML will be loaded into an XMLDocument object (doc) prior to the transformation. // create XSLT Template xslTemplate = Toolbox.GetRequest(Template); xslTemplate.Seek(0, SeekOrigin.Begin); templateReader = XmlReader.Create(xslTemplate); xslt.Load(templateReader); I have stored all the templates as a series of Embedded Resources and the GetRequestCall takes the name of the template and extracts the relevent XSLT file. /// <summary> /// Gets the framwork XML which makes the request /// </summary> /// <param name="RequestFile"></param> /// <returns></returns> public static Stream GetRequest(String RequestFile) { String requestFile = String.Empty; Stream sr = null; Assembly asm = null; try { requestFile = String.Format("CompanyHub.Services.Schemas.{0}", RequestFile); asm = Assembly.GetExecutingAssembly(); sr = asm.GetManifestResourceStream(requestFile); } catch (Exception) { throw; } finally { asm = null; } return sr; } // end private static stream GetRequest We first take the template name and expand it to include the full namespace to the Embedded Resource I like to keep all my schemas in the same directory and so the namespace reflects this. The rest is the default namespace for the project. Then we get the currently executing assembly (which will contain the resources with the call to GetExecutingAssembly() ) Finally we get a stream which contains the XSLT file. We use this stream and then load an XmlReader with the contents of the template, and that is in turn loaded into the XslCompiledTransform object. We convert the object containing the message properties into Xml by serializing it; calling the Serialize() method of the XmlSerializer object. To set up the object we do the following; t = Obj.GetType(); ms = new MemoryStream(); serializer = new XmlSerializer(t); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); We first determine the type of the object being transferred by calling GetType() We create an XmlSerializer object by passing the type of the object being serialized. The serializer writes to a memory stream and that is linked to an XmlTextWriter. Next job is to serialize the object and load it into an XmlDocument. serializer.Serialize(xmlTextWriter, Obj); ms = (MemoryStream)xmlTextWriter.BaseStream; xmlRequest = new XmlTextReader(ms); GovTalkRequest = Toolbox.ConvertByteArrayToString(ms.ToArray()); doc.LoadXml(GovTalkRequest); Time to transform the XML to construct the full request. xslt.Transform(doc, writer); resultStream.Seek(0, SeekOrigin.Begin); request = Toolbox.ConvertByteArrayToString(resultStream.ToArray()); So that creates the full request to be sent to Companies House. Sending the request So far we have a string with a request for the Companies House service. Now we need to send the request to the Companies House Service. Configuration within an Azure project There are entire blog entries written about configuration within an Azure project – most of this is out of scope for this article but the following is a summary. Configuration is defined in two files within the parent project *.csdef which contains the definition of configuration setting. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WebRole name="CompanyHub.Host"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="80" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="DataConnectionString" /> </ConfigurationSettings> </WebRole> <WebRole name="CompanyHub.Services"> <InputEndpoints> <InputEndpoint name="HttpIn" protocol="http" port="8080" /> </InputEndpoints> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> <Setting name="SenderId"/> <Setting name="SenderPassword" /> <Setting name="GovTalkUrl"/> </ConfigurationSettings> </WebRole> <WorkerRole name="CompanyHub.Worker"> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" /> </ConfigurationSettings> </WorkerRole> </ServiceDefinition> Above is the configuration definition from the project. What we are interested in however is the ConfigurationSettings tag of the CompanyHub.Services WebRole. There are four configuration settings here, but at the moment we are interested in the second to forth settings; SenderId, SenderPassword and GovTalkUrl The value of these settings are defined in the ServiceDefinition.cscfg file; <?xml version="1.0"?> <ServiceConfiguration serviceName="OnlineCompanyHub" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration"> <Role name="CompanyHub.Host"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="DataConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> <Role name="CompanyHub.Services"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="SenderId" value="UserID"/> <Setting name="SenderPassword" value="Password"/> <Setting name="GovTalkUrl" value="http://xmlgw.companieshouse.gov.uk/v1-0/xmlgw/Gateway"/> </ConfigurationSettings> </Role> <Role name="CompanyHub.Worker"> <Instances count="2" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="UseDevelopmentStorage=true" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Look for the Role tag that contains our project name (CompanyHub.Services). Having configured the parameters we can now transmit the request. This is done by ‘POST’ing a stream of XML to the Companies House servers. govTalkUrl = RoleEnvironment.GetConfigurationSettingValue("GovTalkUrl"); request = WebRequest.Create(govTalkUrl); request.Method = "POST"; request.ContentType = "text/xml"; writer = new StreamWriter(request.GetRequestStream()); writer.WriteLine(RequestMessage); writer.Close(); We use the WebRequest object to send the object. Set the method of sending to ‘POST’ and the type of data as text/xml. Once set up all we do is write the request to the writer – this sends the request to Companies House. Did the Request Work Part I – Getting the response Having sent a request – we now need the result of that request. response = request.GetResponse(); reader = response.GetResponseStream(); result = Toolbox.ConvertByteArrayToString(Toolbox.ReadFully(reader)); The WebRequest object has a GetResponse() method which allows us to get the response sent back. Like many of these calls the results come in the form of a stream which we convert into a string. Did the Request Work Part II – Translating the Response Much like XSLT and XML were used to create the original request, so it can be used to extract the response and by deserializing the result we create an object that contains the response. Did it work? It would be really great if everything worked all the time. Of course if it did then I don’t suppose people would pay me and others the big bucks so that our programmes do not a) Collapse in a heap (this is an area of memory) b) Blow every fuse in the place in a shower of sparks (this will probably not happen this being real life and not a Hollywood movie, but it was possible to blow the sound system of a BBC Model B with a poorly coded setting) c) Go nuts and trap everyone outside the airlock (this was from a movie, and unless NASA get a manned moon/mars mission set up unlikely to happen) d) Go nuts and take over the world (this was also from a movie, but please note life has a habit of being of exceeding the wildest imaginations of Hollywood writers (note writers – Hollywood executives have no imagination and judging by recent output of that town have turned plagiarism into an art form). e) Freeze in total confusion because the cleaner pulled the plug to the internet router (this has happened) So anyway – we need to check to see if our request actually worked. Within the GovTalk response there is a section that details the status of the message and a description of what went wrong (if anything did). I have defined an XSLT template which will extract these into an XML document. <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <xsl:template match="/"> <GovTalkStatus xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Status> <xsl:value-of select="ev:GovTalkMessage/ev:Header/ev:MessageDetails/ev:Qualifier"/> </Status> <Text> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Text"/> </Text> <Location> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Location"/> </Location> <Number> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Number"/> </Number> <Type> <xsl:value-of select="ev:GovTalkMessage/ev:GovTalkDetails/ev:GovTalkErrors/ev:Error/ev:Type"/> </Type> </GovTalkStatus> </xsl:template> </xsl:stylesheet> Only thing different about previous XSL files is the references to two namespaces ev & gt. These are defined in the GovTalk response at the top of the response; xsi:schemaLocation="http://www.govtalk.gov.uk/CM/envelope http://xmlgw.companieshouse.gov.uk/v1-0/schema/Egov_ch-v2-0.xsd" xmlns="http://www.govtalk.gov.uk/CM/envelope" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:gt="http://www.govtalk.gov.uk/schemas/govtalk/core" If we do not put these references into the XSLT template then the XslCompiledTransform object will not be able to find the relevant tags. Deserialization is a fairly simple activity. encoder = new ASCIIEncoding(); ms = new MemoryStream(encoder.GetBytes(statusXML)); serializer = new XmlSerializer(typeof(GovTalkStatus)); xmlTextWriter = new XmlTextWriter(ms, Encoding.ASCII); messageStatus = (GovTalkStatus)serializer.Deserialize(ms); We set up a serialization object using the object type containing the error state and pass to it the results of a transformation between the XSLT above and the GovTalk response. Now we have an object containing any error state, and the error message. All we need to do is check the status. If there is an error then we can flag an error. If not then we extract the results and pass that as an object back to the calling function. We go this by guess what – defining an XSLT template for the result and using that to create an Xml Stream which can be deserialized into a .Net object. In this instance the XSLT to create the result of a Company Number Search is; <?xml version="1.0" encoding="us-ascii"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ev="http://www.govtalk.gov.uk/CM/envelope" xmlns:sch="http://xmlgw.companieshouse.gov.uk/v1-0/schema" exclude-result-prefixes="ev"> <xsl:template match="/"> <CompanySearchResult xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <CompanyNumber> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyNumber"/> </CompanyNumber> <CompanyName> <xsl:value-of select="ev:GovTalkMessage/ev:Body/sch:NumberSearch/sch:CoSearchItem/sch:CompanyName"/> </CompanyName> </CompanySearchResult> </xsl:template> </xsl:stylesheet> and the object definition is; using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace CompanyHub.Services { public class CompanySearchResult { public CompanySearchResult() { CompanyNumber = String.Empty; CompanyName = String.Empty; } public String CompanyNumber { get; set; } public String CompanyName { get; set; } } } Our entire code to make calls to send a request, and interpret the results are; String request = String.Empty; String response = String.Empty; GovTalkStatus status = null; fault = null; try { using (CompanyNumberSearchRequest requestObj = new CompanyNumberSearchRequest()) { requestObj.PartialCompanyNumber = CompanyNumber; request = Toolbox.CreateRequest(requestObj, "CompanyNumberSearch.xsl"); response = Toolbox.SendGovTalkRequest(request); status = Toolbox.GetMessageStatus(response); if (status.Status.ToLower() == "error") { fault = new HubFault() { Message = status.Text }; } else { Object obj = Toolbox.GetGovTalkResponse(response, "CompanyNumberSearchResult.xsl", typeof(CompanySearchResult)); } } } catch (FaultException<ArgumentException> ex) { fault = new HubFault() { FaultType = ex.Detail.GetType().FullName, Message = ex.Detail.Message }; } catch (System.Exception ex) { fault = new HubFault() { FaultType = ex.GetType().FullName, Message = ex.Message }; } finally { } Wrap up So there we have it – a reusable set of functions to send and interpret XML results from an internet based service. The code is reusable with a little change with any service which uses XML as a transport mechanism – and as for the Companies House GovTalk service all I need to do is create various objects for the result and message sent and the relevent XSLT files. I might need minor changes for other services but something like 70-90% will be exactly the same.

Read the article

JAVA image transfer problem

- by user579098

Hi, I have a school assignment, to send a jpg image,split it into groups of 100 bytes, corrupt it, use a CRC check to locate the errors and re-transmit until it eventually is built back into its original form. It's practically ready, however when I check out the new images, they appear with errors.. I would really appreciate if someone could look at my code below and maybe locate this logical mistake as I can't understand what the problem is because everything looks ok :S For the file with all the data needed including photos and error patterns one could download it from this link:http://rapidshare.com/#!download|932tl2|443122762|Data.zip|739 Thanks in advance, Stefan p.s dont forget to change the paths in the code for the image and error files package networks; import java.io.*; // for file reader import java.util.zip.CRC32; // CRC32 IEEE (Ethernet) public class Main { /** * Reads a whole file into an array of bytes. * @param file The file in question. * @return Array of bytes containing file data. * @throws IOException Message contains why it failed. */ public static byte[] readFileArray(File file) throws IOException { InputStream is = new FileInputStream(file); byte[] data=new byte[(int)file.length()]; is.read(data); is.close(); return data; } /** * Writes (or overwrites if exists) a file with data from an array of bytes. * @param file The file in question. * @param data Array of bytes containing the new file data. * @throws IOException Message contains why it failed. */ public static void writeFileArray(File file, byte[] data) throws IOException { OutputStream os = new FileOutputStream(file,false); os.write(data); os.close(); } /** * Converts a long value to an array of bytes. * @param data The target variable. * @return Byte array conversion of data. * @see http://www.daniweb.com/code/snippet216874.html */ public static byte[] toByta(long data) { return new byte[] { (byte)((data >> 56) & 0xff), (byte)((data >> 48) & 0xff), (byte)((data >> 40) & 0xff), (byte)((data >> 32) & 0xff), (byte)((data >> 24) & 0xff), (byte)((data >> 16) & 0xff), (byte)((data >> 8) & 0xff), (byte)((data >> 0) & 0xff), }; } /** * Converts a an array of bytes to long value. * @param data The target variable. * @return Long value conversion of data. * @see http://www.daniweb.com/code/snippet216874.html */ public static long toLong(byte[] data) { if (data == null || data.length != 8) return 0x0; return (long)( // (Below) convert to longs before shift because digits // are lost with ints beyond the 32-bit limit (long)(0xff & data[0]) << 56 | (long)(0xff & data[1]) << 48 | (long)(0xff & data[2]) << 40 | (long)(0xff & data[3]) << 32 | (long)(0xff & data[4]) << 24 | (long)(0xff & data[5]) << 16 | (long)(0xff & data[6]) << 8 | (long)(0xff & data[7]) << 0 ); } public static byte[] nextNoise(){ byte[] result=new byte[100]; // copy a frame's worth of data (or remaining data if it is less than frame length) int read=Math.min(err_data.length-err_pstn, 100); System.arraycopy(err_data, err_pstn, result, 0, read); // if read data is less than frame length, reset position and add remaining data if(read<100){ err_pstn=100-read; System.arraycopy(err_data, 0, result, read, err_pstn); }else // otherwise, increase position err_pstn+=100; // return noise segment return result; } /** * Given some original data, it is purposefully corrupted according to a * second data array (which is read from a file). In pseudocode: * corrupt = original xor corruptor * @param data The original data. * @return The new (corrupted) data. */ public static byte[] corruptData(byte[] data){ // get the next noise sequence byte[] noise = nextNoise(); // finally, xor data with noise and return result for(int i=0; i<100; i++)data[i]^=noise[i]; return data; } /** * Given an array of data, a packet is created. In pseudocode: * frame = corrupt(data) + crc(data) * @param data The original frame data. * @return The resulting frame data. */ public static byte[] buildFrame(byte[] data){ // pack = [data]+crc32([data]) byte[] hash = new byte[8]; // calculate crc32 of data and copy it to byte array CRC32 crc = new CRC32(); crc.update(data); hash=toByta(crc.getValue()); // create a byte array holding the final packet byte[] pack = new byte[data.length+hash.length]; // create the corrupted data byte[] crpt = new byte[data.length]; crpt = corruptData(data); // copy corrupted data into pack System.arraycopy(crpt, 0, pack, 0, crpt.length); // copy hash into pack System.arraycopy(hash, 0, pack, data.length, hash.length); // return pack return pack; } /** * Verifies frame contents. * @param frame The frame data (data+crc32). * @return True if frame is valid, false otherwise. */ public static boolean verifyFrame(byte[] frame){ // allocate hash and data variables byte[] hash=new byte[8]; byte[] data=new byte[frame.length-hash.length]; // read frame into hash and data variables System.arraycopy(frame, frame.length-hash.length, hash, 0, hash.length); System.arraycopy(frame, 0, data, 0, frame.length-hash.length); // get crc32 of data CRC32 crc = new CRC32(); crc.update(data); // compare crc32 of data with crc32 of frame return crc.getValue()==toLong(hash); } /** * Transfers a file through a channel in frames and reconstructs it into a new file. * @param jpg_file File name of target file to transfer. * @param err_file The channel noise file used to simulate corruption. * @param out_file The name of the newly-created file. * @throws IOException */ public static void transferFile(String jpg_file, String err_file, String out_file) throws IOException { // read file data into global variables jpg_data = readFileArray(new File(jpg_file)); err_data = readFileArray(new File(err_file)); err_pstn = 0; // variable that will hold the final (transfered) data byte[] out_data = new byte[jpg_data.length]; // holds the current frame data byte[] frame_orig = new byte[100]; byte[] frame_sent = new byte[100]; // send file in chunks (frames) of 100 bytes for(int i=0; i<Math.ceil(jpg_data.length/100); i++){ // copy jpg data into frame and init first-time switch System.arraycopy(jpg_data, i*100, frame_orig, 0, 100); boolean not_first=false; System.out.print("Packet #"+i+": "); // repeat getting same frame until frame crc matches with frame content do { if(not_first)System.out.print("F"); frame_sent=buildFrame(frame_orig); not_first=true; }while(!verifyFrame(frame_sent)); // usually, you'd constrain this by time to prevent infinite loops (in // case the channel is so wacked up it doesn't get a single packet right) // copy frame to image file System.out.println("S"); System.arraycopy(frame_sent, 0, out_data, i*100, 100); } System.out.println("\nDone."); writeFileArray(new File(out_file),out_data); } // global variables for file data and pointer public static byte[] jpg_data; public static byte[] err_data; public static int err_pstn=0; public static void main(String[] args) throws IOException { // list of jpg files String[] jpg_file={ "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo1.jpg", "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo2.jpg", "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo3.jpg", "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo4.jpg" }; // list of error patterns String[] err_file={ "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 1.DAT", "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 2.DAT", "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 3.DAT", "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 4.DAT" }; // loop through all jpg/channel combinations and run tests for(int x=0; x<jpg_file.length; x++){ for(int y=0; y<err_file.length; y++){ System.out.println("Transfering photo"+(x+1)+".jpg using Pattern "+(y+1)+"..."); transferFile(jpg_file[x],err_file[y],jpg_file[x].replace("photo","CH#"+y+"_photo")); } } } }

Read the article

Garbled text in Screen [closed]

- by Prabin Dahal

The graphical Interface in my system is garbled with some text. At the beginning I thought it was due to java and tomcat that I installed. But after removing java and tomcat, it is still the same. I am using ubuntu server and i have installed xfce desktop environment with oboard softkey I have added my dmesg output to this message. What is the problem here. I am not able to figure it out. Thank you for your help. Prabin [ 0.390936] usbcore: registered new interface driver usbfs [ 0.391006] usbcore: registered new interface driver hub [ 0.391147] usbcore: registered new device driver usb [ 0.391580] PCI: Using ACPI for IRQ routing [ 0.400509] PCI: pci_cache_line_size set to 64 bytes [ 0.400669] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.400681] reserve RAM buffer: 000000007f597000 - 000000007fffffff [ 0.400699] reserve RAM buffer: 000000007f6f0000 - 000000007fffffff [ 0.401135] NetLabel: Initializing [ 0.401155] NetLabel: domain hash size = 128 [ 0.401168] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.401212] NetLabel: unlabeled traffic allowed by default [ 0.401466] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.401494] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.401520] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.408228] Switching to clocksource hpet [ 0.434341] AppArmor: AppArmor Filesystem Enabled [ 0.434447] pnp: PnP ACPI init [ 0.434531] ACPI: bus type pnp registered [ 0.434784] pnp 00:00: [bus 00-ff] [ 0.434794] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.434804] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.434813] pnp 00:00: [io 0x0d00-0xffff window] [ 0.434822] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.434831] pnp 00:00: [mem 0x00000000 window] [ 0.434840] pnp 00:00: [mem 0x80000000-0xffffffff window] [ 0.435018] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.435526] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.435537] pnp 00:01: [mem 0x7f700000-0x7f7fffff] [ 0.435545] pnp 00:01: [mem 0x7f800000-0x7fffffff] [ 0.435554] pnp 00:01: [mem 0xfee00000-0xfeefffff] [ 0.435727] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.435754] system 00:01: [mem 0x7f700000-0x7f7fffff] has been reserved [ 0.435775] system 00:01: [mem 0x7f800000-0x7fffffff] has been reserved [ 0.435796] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.435818] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.436233] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.436245] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.436414] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.436512] pnp 00:03: [io 0x0060] [ 0.436521] pnp 00:03: [io 0x0064] [ 0.436548] pnp 00:03: [irq 1] [ 0.436682] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.436825] pnp 00:04: [irq 12] [ 0.436958] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.437835] pnp 00:05: [io 0x03f8-0x03ff] [ 0.437861] pnp 00:05: [irq 4] [ 0.437870] pnp 00:05: [dma 0 disabled] [ 0.438142] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.439014] pnp 00:06: [io 0x02f8-0x02ff] [ 0.439036] pnp 00:06: [irq 3] [ 0.439045] pnp 00:06: [dma 0 disabled] [ 0.439297] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.439346] pnp 00:07: [io 0x0000-0x000f] [ 0.439355] pnp 00:07: [io 0x0081-0x0083] [ 0.439363] pnp 00:07: [io 0x0087] [ 0.439371] pnp 00:07: [io 0x0089-0x008b] [ 0.439380] pnp 00:07: [io 0x008f] [ 0.439388] pnp 00:07: [io 0x00c0-0x00df] [ 0.439563] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.439617] pnp 00:08: [io 0x0070-0x0077] [ 0.439639] pnp 00:08: [irq 8] [ 0.439751] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.439788] pnp 00:09: [io 0x0061] [ 0.439893] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.439977] pnp 00:0a: [io 0x0010-0x001f] [ 0.439986] pnp 00:0a: [io 0x0022-0x003f] [ 0.439994] pnp 00:0a: [io 0x0044-0x005f] [ 0.440055] pnp 00:0a: [io 0x0063] [ 0.440063] pnp 00:0a: [io 0x0065] [ 0.440071] pnp 00:0a: [io 0x0067-0x006f] [ 0.440079] pnp 00:0a: [io 0x0072-0x007f] [ 0.440086] pnp 00:0a: [io 0x0080] [ 0.440094] pnp 00:0a: [io 0x0084-0x0086] [ 0.440102] pnp 00:0a: [io 0x0088] [ 0.440109] pnp 00:0a: [io 0x008c-0x008e] [ 0.440117] pnp 00:0a: [io 0x0090-0x009f] [ 0.440125] pnp 00:0a: [io 0x00a2-0x00bf] [ 0.440133] pnp 00:0a: [io 0x00e0-0x00ef] [ 0.440141] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.440150] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.440160] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] [ 0.440168] pnp 00:0a: [io 0x03f4] [ 0.440175] pnp 00:0a: [io 0x03f5] [ 0.440183] pnp 00:0a: [io 0x0374] [ 0.440190] pnp 00:0a: [io 0x0375] [ 0.440405] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.440432] system 00:0a: [io 0x03f4] has been reserved [ 0.440451] system 00:0a: [io 0x03f5] has been reserved [ 0.440469] system 00:0a: [io 0x0374] has been reserved [ 0.440488] system 00:0a: [io 0x0375] has been reserved [ 0.440508] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.440550] pnp 00:0b: [io 0x00f0-0x00ff] [ 0.440572] pnp 00:0b: [irq 13] [ 0.440691] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.440770] pnp 00:0c: [io 0x0810] [ 0.440779] pnp 00:0c: [io 0x0800-0x080f] [ 0.440787] pnp 00:0c: [io 0xffff] [ 0.440947] system 00:0c: [io 0x0810] has been reserved [ 0.440970] system 00:0c: [io 0x0800-0x080f] has been reserved [ 0.440989] system 00:0c: [io 0xffff] has been reserved [ 0.441010] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.441620] pnp 00:0d: [io 0x0900-0x097f] [ 0.441630] pnp 00:0d: [io 0x09c0-0x09ff] [ 0.441639] pnp 00:0d: [io 0x0400-0x043f] [ 0.441647] pnp 00:0d: [io 0x0480-0x04bf] [ 0.441656] pnp 00:0d: [mem 0xfec00000-0xfec85fff] [ 0.441664] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff] [ 0.441673] pnp 00:0d: [mem 0x000c0000-0x000dffff] [ 0.441689] pnp 00:0d: [mem 0x000e0000-0x000effff] [ 0.441697] pnp 00:0d: [mem 0x000f0000-0x000fffff] [ 0.441706] pnp 00:0d: [mem 0xff800000-0xffffffff] [ 0.441911] system 00:0d: [io 0x0900-0x097f] has been reserved [ 0.441935] system 00:0d: [io 0x09c0-0x09ff] has been reserved [ 0.441955] system 00:0d: [io 0x0400-0x043f] has been reserved [ 0.441975] system 00:0d: [io 0x0480-0x04bf] has been reserved [ 0.441997] system 00:0d: [mem 0xfec00000-0xfec85fff] could not be reserved [ 0.442019] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.442040] system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.442061] system 00:0d: [mem 0x000e0000-0x000effff] could not be reserved [ 0.442082] system 00:0d: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.442103] system 00:0d: [mem 0xff800000-0xffffffff] has been reserved [ 0.442126] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.442308] pnp 00:0e: [mem 0xfed00000-0xfed003ff] [ 0.442454] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.442569] pnp 00:0f: [mem 0x7f6f0000-0x7f6fffff] [ 0.442762] system 00:0f: [mem 0x7f6f0000-0x7f6fffff] has been reserved [ 0.442788] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.443360] pnp: PnP ACPI: found 16 devices [ 0.443378] ACPI: ACPI bus type pnp unregistered [ 0.443395] PnPBIOS: Disabled by ACPI PNP [ 0.486106] PCI: max bus depth: 3 pci_try_num: 4 [ 0.486189] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.486217] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.486241] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff] [ 0.486266] pci 0000:00:1c.0: bridge window [mem 0xff700000-0xff7fffff pref] [ 0.486298] pci 0000:03:01.0: PCI bridge to [bus 04-04] [ 0.486319] pci 0000:03:01.0: bridge window [io 0xd000-0xdfff] [ 0.486348] pci 0000:03:01.0: bridge window [mem 0xd0000000-0xd00fffff] [ 0.486374] pci 0000:03:01.0: bridge window [mem 0xff600000-0xff6fffff 64bit pref] [ 0.486406] pci 0000:03:02.0: PCI bridge to [bus 05-05] [ 0.486444] pci 0000:03:03.0: PCI bridge to [bus 06-06] [ 0.486479] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.486499] pci 0000:02:00.0: bridge window [io 0xd000-0xdfff] [ 0.486522] pci 0000:02:00.0: bridge window [mem 0xd0000000-0xd00fffff] [ 0.486545] pci 0000:02:00.0: bridge window [mem 0xff600000-0xff6fffff 64bit pref] [ 0.486575] pci 0000:00:1c.1: PCI bridge to [bus 02-06] [ 0.486593] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.486615] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd00fffff] [ 0.486637] pci 0000:00:1c.1: bridge window [mem 0xff600000-0xff6fffff pref] [ 0.486710] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.486735] pci 0000:00:1c.0: setting latency timer to 64 [ 0.486774] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.486796] pci 0000:00:1c.1: setting latency timer to 64 [ 0.486817] pci 0000:02:00.0: setting latency timer to 64 [ 0.486836] pci 0000:03:01.0: setting latency timer to 64 [ 0.486858] pci 0000:03:02.0: setting latency timer to 64 [ 0.486880] pci 0000:03:03.0: setting latency timer to 64 [ 0.486893] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.486902] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.486912] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.486922] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff] [ 0.486932] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.486941] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff] [ 0.486951] pci_bus 0000:01: resource 2 [mem 0xff700000-0xff7fffff pref] [ 0.486961] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.486970] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff] [ 0.486980] pci_bus 0000:02: resource 2 [mem 0xff600000-0xff6fffff pref] [ 0.486989] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.486998] pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd00fffff] [ 0.487008] pci_bus 0000:03: resource 2 [mem 0xff600000-0xff6fffff 64bit pref] [ 0.487018] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.487028] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd00fffff] [ 0.487038] pci_bus 0000:04: resource 2 [mem 0xff600000-0xff6fffff 64bit pref] [ 0.487177] NET: Registered protocol family 2 [ 0.487405] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.488397] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.489792] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.490493] TCP: Hash tables configured (established 131072 bind 65536) [ 0.490525] TCP reno registered [ 0.490551] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.490590] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.490898] NET: Registered protocol family 1 [ 0.490970] pci 0000:00:02.0: Boot video device [ 0.491052] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.491092] pci 0000:00:1d.0: PCI INT A disabled [ 0.491134] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.491174] pci 0000:00:1d.1: PCI INT B disabled [ 0.491220] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.491259] pci 0000:00:1d.2: PCI INT C disabled [ 0.491307] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.864431] Freeing initrd memory: 13820k freed [ 2.088042] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.088207] pci 0000:00:1d.7: PCI INT D disabled [ 2.088267] PCI: CLS 64 bytes, default 64 [ 2.089248] audit: initializing netlink socket (disabled) [ 2.089287] type=2000 audit(1349363630.084:1): initialized [ 2.144783] highmem bounce pool size: 64 pages [ 2.144808] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.160057] VFS: Disk quotas dquot_6.5.2 [ 2.160232] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.161716] fuse init (API version 7.17) [ 2.161995] msgmni has been set to 1713 [ 2.162925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.163008] io scheduler noop registered [ 2.163023] io scheduler deadline registered [ 2.163048] io scheduler cfq registered (default) [ 2.163339] pcieport 0000:00:1c.0: setting latency timer to 64 [ 2.163530] pcieport 0000:00:1c.1: setting latency timer to 64 [ 2.163706] pcieport 0000:02:00.0: setting latency timer to 64 [ 2.163873] pcieport 0000:03:01.0: setting latency timer to 64 [ 2.163964] pcieport 0000:03:01.0: irq 40 for MSI/MSI-X [ 2.164193] pcieport 0000:03:02.0: setting latency timer to 64 [ 2.164272] pcieport 0000:03:02.0: irq 41 for MSI/MSI-X [ 2.164453] pcieport 0000:03:03.0: setting latency timer to 64 [ 2.164531] pcieport 0000:03:03.0: irq 42 for MSI/MSI-X [ 2.164783] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.164801] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.164816] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.164853] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 2.164867] pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.164880] pcieport 0000:03:01.0: Signaling PME through PCIe PME interrupt [ 2.164892] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 2.164904] pcieport 0000:03:02.0: Signaling PME through PCIe PME interrupt [ 2.164917] pcieport 0000:03:03.0: Signaling PME through PCIe PME interrupt [ 2.164932] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 2.164988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.165115] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 8110 ss_vid 8086 ss_did 8119 [ 2.165177] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 2.165199] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 8112 ss_vid 8086 ss_did 8119 [ 2.165260] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 2.165290] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.165488] intel_idle: MWAIT substates: 0x3020220 [ 2.165508] intel_idle: v0.4 model 0x1C [ 2.165513] intel_idle: lapic_timer_reliable_states 0x2 [ 2.165519] Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 2.165779] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 2.165855] ACPI: Lid Switch [LID] [ 2.165983] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.166005] ACPI: Power Button [PWRB] [ 2.173811] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.173829] ACPI: Thermal Zone [TZ00] (48 C) [ 2.174004] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.174018] ACPI: Thermal Zone [TZ01] (34 C) [ 2.174194] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.174207] ACPI: Thermal Zone [TZ02] (34 C) [ 2.174378] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.174392] ACPI: Thermal Zone [TZ03] (34 C) [ 2.174503] ERST: Table is not found! [ 2.174513] GHES: HEST is not enabled! [ 2.174601] isapnp: Scanning for PnP cards... [ 2.176175] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.196702] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.292409] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.528909] isapnp: No Plug & Play device found [ 2.588733] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.624523] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.640702] Linux agpgart interface v0.103 [ 2.645138] brd: module loaded [ 2.647452] loop: module loaded [ 2.648149] pata_acpi 0000:00:1f.1: setting latency timer to 64 [ 2.649238] Fixed MDIO Bus: probed [ 2.649315] tun: Universal TUN/TAP device driver, 1.6 [ 2.649327] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 2.649524] PPP generic driver version 2.4.2 [ 2.649824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.649884] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.649937] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.649946] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.650082] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.650148] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.654045] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.654093] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd02c4000 [ 2.668035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.668392] hub 1-0:1.0: USB hub found [ 2.668413] hub 1-0:1.0: 8 ports detected [ 2.668618] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.668666] uhci_hcd: USB Universal Host Controller Interface driver [ 2.668726] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.668751] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.668759] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.668910] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.668981] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000f040 [ 2.669335] hub 2-0:1.0: USB hub found [ 2.669355] hub 2-0:1.0: 2 ports detected [ 2.669508] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.669531] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.669538] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.669675] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.669739] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000f020 [ 2.670099] hub 3-0:1.0: USB hub found [ 2.670118] hub 3-0:1.0: 2 ports detected [ 2.670271] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.670295] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.670302] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.670435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.670502] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000f000 [ 2.670869] hub 4-0:1.0: USB hub found [ 2.670888] hub 4-0:1.0: 2 ports detected [ 2.671186] usbcore: registered new interface driver libusual [ 2.671332] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.673408] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.673437] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.673844] mousedev: PS/2 mouse device common for all mice [ 2.674272] rtc_cmos 00:08: RTC can wake from S4 [ 2.674482] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 2.674529] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 2.674691] device-mapper: uevent: version 1.0.3 [ 2.674903] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.675024] EISA: Probing bus 0 at eisa.0 [ 2.675037] EISA: Cannot allocate resource for mainboard [ 2.675050] Cannot allocate resource for EISA slot 1 [ 2.675061] Cannot allocate resource for EISA slot 2 [ 2.675072] Cannot allocate resource for EISA slot 3 [ 2.675083] Cannot allocate resource for EISA slot 4 [ 2.675094] Cannot allocate resource for EISA slot 5 [ 2.675105] Cannot allocate resource for EISA slot 6 [ 2.675116] Cannot allocate resource for EISA slot 7 [ 2.675127] Cannot allocate resource for EISA slot 8 [ 2.675137] EISA: Detected 0 cards. [ 2.675161] cpufreq-nforce2: No nForce2 chipset. [ 2.675401] cpuidle: using governor ladder [ 2.675786] cpuidle: using governor menu [ 2.675797] EFI Variables Facility v0.08 2004-May-17 [ 2.676429] TCP cubic registered [ 2.676751] NET: Registered protocol family 10 [ 2.678031] NET: Registered protocol family 17 [ 2.678052] Registering the dns_resolver key type [ 2.678107] Using IPI No-Shortcut mode [ 2.678515] PM: Hibernation image not present or could not be loaded. [ 2.678543] registered taskstats version 1 [ 2.701145] Magic number: 0:84:234 [ 2.701312] rtc_cmos 00:08: setting system clock to 2012-10-04 15:13:51 UTC (1349363631) [ 2.702280] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.702294] EDD information not available. [ 2.702858] Freeing unused kernel memory: 740k freed [ 2.703630] Write protecting the kernel text: 5816k [ 2.703692] Write protecting the kernel read-only data: 2376k [ 2.703706] NX-protecting the kernel data: 4424k [ 2.751226] udevd[84]: starting version 175 [ 2.980162] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 3.001394] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.001474] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.001554] r8169 0000:01:00.0: setting latency timer to 64 [ 3.001654] r8169 0000:01:00.0: irq 43 for MSI/MSI-X [ 3.004220] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xf8416000, 00:18:92:03:10:46, XID 1c4000c0 IRQ 43 [ 3.004254] r8169 0000:01:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 3.004347] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.005085] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.005182] r8169 0000:04:00.0: setting latency timer to 64 [ 3.005292] r8169 0000:04:00.0: irq 44 for MSI/MSI-X [ 3.007187] r8169 0000:04:00.0: eth1: RTL8168c/8111c at 0xf8418000, 00:18:92:03:10:47, XID 1c4000c0 IRQ 44 [ 3.007224] r8169 0000:04:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 3.034417] pata_sch 0000:00:1f.1: version 0.2 [ 3.034518] pata_sch 0000:00:1f.1: setting latency timer to 64 [ 3.036698] scsi0 : pata_sch [ 3.039842] scsi1 : pata_sch [ 3.040913] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf060 irq 14 [ 3.040940] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf068 irq 15 [ 3.131850] Initializing USB Mass Storage driver... [ 3.136405] scsi2 : usb-storage 1-1:1.0 [ 3.136642] usbcore: registered new interface driver usb-storage [ 3.136656] USB Mass Storage support registered. [ 3.524465] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 3.968144] usb 3-2: new full-speed USB device number 3 using uhci_hcd [ 4.137903] scsi 2:0:0:0: Direct-Access TS TS4GUFM-H 1100 PQ: 0 ANSI: 0 CCS [ 4.140067] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.140590] sd 2:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB) [ 4.141597] sd 2:0:0:0: [sda] Write Protect is off [ 4.141618] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 4.142974] sd 2:0:0:0: [sda] No Caching mode page present [ 4.143000] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 4.145837] sd 2:0:0:0: [sda] No Caching mode page present [ 4.145858] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 4.147931] sda: sda1 sda2 < sda5 > [ 4.150972] sd 2:0:0:0: [sda] No Caching mode page present [ 4.151001] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 4.151023] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.249168] input: HID 046a:004b as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 [ 4.249579] generic-usb 0003:046A:004B.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:004b] on usb-0000:00:1d.1-1/input0 [ 4.287805] input: HID 046a:004b as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3 [ 4.289235] generic-usb 0003:046A:004B.0002: input,hidraw1: USB HID v1.11 Mouse [HID 046a:004b] on usb-0000:00:1d.1-1/input1 [ 4.297604] input: EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch\xffffffc2\xffffffae\xffffffae USB Touchmonitor Interface as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 [ 4.298913] generic-usb 0003:04E7:0050.0003: input,hidraw2: USB HID v1.00 Pointer [EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch\xffffffc2\xffffffae\xffffffae USB Touchmonitor Interface] on usb-0000:00:1d.1-2/input0 [ 4.299878] usbcore: registered new interface driver usbhid [ 4.299925] usbhid: USB HID core driver [ 4.352639] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 4.352661] EXT4-fs (sda1): write access will be enabled during recovery [ 8.519257] EXT4-fs (sda1): recovery complete [ 8.564389] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 14.280922] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.280944] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.310368] udevd[308]: starting version 175 [ 14.353873] Adding 1045500k swap on /dev/sda5. Priority:-1 extents:1 across:1045500k [ 14.428718] lp: driver loaded but no devices found [ 14.521667] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.073459] [drm] Initialized drm 1.1.0 20060810 [ 15.097073] psb_gfx: module is from the staging directory, the quality is unknown, you have been warned. [ 15.180630] gma500 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.180648] gma500 0000:00:02.0: setting latency timer to 64 [ 15.182117] Stolen memory information [ 15.182127] base in RAM: 0x7f800000 [ 15.182134] size: 7932K, calculated by (GTT RAM base) - (Stolen base), seems wrong [ 15.182143] the correct size should be: 8M(dvmt mode=3) [ 15.234889] Set up 1983 stolen pages starting at 0x7f800000, GTT offset 0K [ 15.235126] [drm] SGX core id = 0x01130000 [ 15.235135] [drm] SGX core rev major = 0x01, minor = 0x02 [ 15.235143] [drm] SGX core rev maintenance = 0x01, designer = 0x00 [ 15.268796] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 15.269888] acpi device:04: registered as cooling_device2 [ 15.270568] acpi device:05: registered as cooling_device3 [ 15.270947] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 15.271238] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.271424] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 15.271434] [drm] No driver support for vblank timestamp query. [ 15.374694] type=1400 audit(1349363644.167:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=435 comm="apparmor_parser" [ 15.385518] type=1400 audit(1349363644.179:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=435 comm="apparmor_parser" [ 15.386369] type=1400 audit(1349363644.179:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=435 comm="apparmor_parser" [ 15.677514] r8169 0000:01:00.0: eth0: link down [ 15.694828] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.537490] gma500 0000:00:02.0: allocated 800x480 fb [ 16.558066] fbcon: psbfb (fb0) is primary device [ 16.747122] gma500 0000:00:02.0: BL bug: Reg 00000000 save 00000000 [ 16.775550] Console: switching to colour frame buffer device 100x30 [ 16.781804] fb0: psbfb frame buffer device [ 16.781812] drm: registered panic notifier [ 16.870168] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 [ 16.871166] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 16.871186] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 [ 16.871207] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.871284] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 29.338953] r8169 0000:01:00.0: eth0: link up [ 29.339471] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.427223] init: failsafe main process (675) killed by TERM signal [ 31.522411] type=1400 audit(1349363660.316:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=889 comm="apparmor_parser" [ 31.523956] type=1400 audit(1349363660.316:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=889 comm="apparmor_parser" [ 31.524882] type=1400 audit(1349363660.320:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=889 comm="apparmor_parser" [ 31.525940] type=1400 audit(1349363660.320:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=891 comm="apparmor_parser" [ 34.526445] postgres (1003): /proc/1003/oom_adj is deprecated, please use /proc/1003/oom_score_adj instead. [ 40.144048] eth0: no IPv6 routers present

Read the article

Array from HTML forms - Internal Server Error

- by user1392411

I try to make a requestform for our school. But if I transmit this form I get a "Internal Server Error". I searched but I found nothing like that. Also I don't get a only this error message "Internal Server Error", nothing more. Any ideas why? <!DOCTYPE html> <html> <head> <title></title> <meta charset="utf-8"> <meta name="description" content=""> <link rel="stylesheet" href="../css/normalize.css" /> <link rel="stylesheet" href="../css/bestellformular.css" />   </head> <body> <section id="head"> </section> <form action="../php/einlesen.php" method="post"> <section id="body"> <h1>Bestellung</h1> <table> <colgroup> <col width="10%"> <col width="80%"> <col width="10%"> </colgroup> <tr> <th> Artikel-Nr. </th> <th> Artikel </th> <th> Menge </th> </tr> <tr> <td> <input type="number" placeholder="Artikel-Nr." name="articelnr[]" required /> </td> <td> <input type="text" placeholder="Name des Artikels" name="articelname[]" required /> </td> <td> <input type="number" placeholder="Menge" name="quantity[]" required /> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> <tr> <td> <input type="number" name="articelnr[]" /> </td> <td> <input type="text" name="articelname[]" /> </td> <td> <input type="number" name="quantity[]"/> </td> </tr> </table> </section> <section id="info"> <div class="left"> <hr /> <p> Kundennummer <input type="text" /> </p> </div> <div class="right"> <table> <tr> <td>Firma</td> <td><input type="text" name="company"required /></td> </tr> <tr> <td>Ort, PLZ</td> <td><input type="text" name="place" required /></td> <td><input type="number" name="plz" class="number" required /></td> </tr> <tr> <td>Straße, Nr.</td> <td><input type="text" name="street"required /></td> <td><input type="number" name="streetnr" class="number" required /></td> </tr> <tr> <td>Telefon</td> <td><input type="tel" name="tel" required /></td> </tr> <tr> <td>Fax</td> <td><input type="text" name="fax" required /></td> </tr> <tr> <td>E-Mail</td> <td><input type="email" name="email" required /></td> </tr> <tr> <td>Datum</td> <td><input type="date" name="date" required placeholder="tt.mm.jj"/></td> </tr> </table> </div> </section> <section id="submit"> <input type="checkbox" name="agb" required /> Ich habe die <a href="../docs/agb.pdf">AGB</a> gelesen und akzeptiere diese. <input type="submit" value="Bestellung Abschicken"/> </section> </form> <section id="footer"> <hr /> </section> </body> </html> Any Ideas why? The data is sent to a yet empty PHP document. The bracelets in the name tag are used to get an array. My PHP version is 5.3.8

Read the article

Boot log from remotely managed/hacked iPhone for analysis

- by user1319903

in reference to my other post. syslog captured immediately after a hard reset for analysis of foul play. Apr 8, 2012 10:08:36 PM - dataaccessd [53] (Notice): 137860|CoreDAV|Warn |Account "iCloud" couldn't reach the server at p03-contacts.icloud.com: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0xde63920 {NSErrorFailingURLStringKey=https://%[email protected]/159665024/principal/, NSErrorFailingURLKey=https://%[email protected]/ /principal/, NSLocalizedDescription=The Internet connection appears to be offline., NSUnderlyingError=0xde7dc00 "The Internet connection appears to be offline."} Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection interrupted Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): DEBUG: disconnected Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: Canceling Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection invalid Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Builtin profile: container (sandbox) Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Container: /private/var/mobile/Applications/048D35CA-6427-4EC8-8B76-A194697A7CE9 [69] (sandbox) Apr 8, 2012 10:08:35 PM - wifid [29] (Error): WiFi:[355640915.904103]: Client dataaccessd set type to background application Apr 8, 2012 10:08:35 PM - dataaccessd [53] (Notice): 137860|DA|Warn |Delegate 5ADDBE3B-D5FD-43E1-87D4-C1153733EFAB finished a refresh but it is not registered with the refresh manager Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting system time to 04/09/2012 05:08:34 from GPS because time is unchanged Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting time zone to America/Los_Angeles from NITZ Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(1) Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:Sending lock change Apr 8, 2012 10:08:32 PM - profiled [20] (Notice): (Note ) profiled: Device unlock notification received Apr 8, 2012 10:08:31 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Retrieved push tokens. Dev: 0, Prod: 0 Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Media stream daemon starting... Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Notice): SMSCTServer is available and ready to rock. Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Error): mms: * isMmsConfigured = 1 Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): BT: failed to get connectable state with error 111 Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SMS Plugin initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): Telephony plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SIMToolkit plugin for SpringBoard initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): WiFi picker plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): EKAlarmEngine: Region monitoring not available or enabled. Trigger ignored! Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 0 Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Entering state unplugged_screen_on even though we are already in it, doing nothing Apr 8, 2012 10:08:24 PM - wifid [29] (Error): WiFi:[355640904.616440]: Disable WoW requested by "spd" Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Warning): Application windows are expected to have a root view controller at the end of application launch Apr 8, 2012 10:08:23 PM - SpringBoard [15] (Warning): BTM: attaching to BTServer Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated: fw len=1232920 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated - firmware checksum: 0x05935019 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 0 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 0: 0x0145 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 1: 0x7736 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=0) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=1) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - profiled [20] (Notice): (Note ) profiled: Locking device Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'cdma', ' '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function PTP Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction all functions registered- we are ready to start usb stack Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'nb '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'wb '} added to resources Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): MobileDelete: LowDisk Plugin: start Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): kqueue registration successful Apr 8, 2012 10:08:22 PM - mediaserverd [44] (Error): 22:08:22.522867 com.apple.AVConference: /SourceCache/GameKitServices/GameKitServices-344.21/AVConference.subproj/Sources/AVConferenceServer.m:1867: AVConferenceServerStart Apr 8, 2012 10:08:22 PM - CommCenter [18] (Notice): Carrier bundle value for recipient address: 28818773 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: iPod USB Interface Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice Interface: AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): IOAccessoryPortUSB::start Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): virtual bool AppleUSBDeviceMux::start(IOService*) build: Feb 1 2012 23:16:46 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): init_waste Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice::start: Host MAC address = 02:(this Mac address does not physically exist) -edit Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice: Ethernet address Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'cdma' ' ' } Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.282776]: Could not read APPLE80211_IOC_SUPPORTED_CHANNELS err=82 Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.312786]: Client itunesstored is background application Apr 8, 2012 10:08:21 PM - timed [31] (Notice): (Note ) CoreTime: Want active time in 38.24hrs. Need active time in 121.57hrs. Apr 8, 2012 10:08:21 PM - SpringBoard [15] (Notice): MultitouchHID: detection mode: 255-0 (deferring until bootloaded) Apr 8, 2012 10:08:21 PM - CLTM [12] (Error): CLTM: resetting temps: now = 1333948101, last update = -2147483648 Apr 8, 2012 10:08:21 PM - locationd [28] (Error): WiFi:[355640901.852993]: WiFiManager now available Apr 8, 2012 10:08:21 PM - OTACrashCopier [62] (Notice): (Warn ) Failed to read attributes from '/var/mobile/Library/OTALogging/.last_successful_submission_marker' Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'nb ' } Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'wb ' } Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): successful initialization Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore:initFirmware(): 2496 PropTxStatus feature is not enabled for this platform Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle():: creating virtual interface with prefix = ap Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle(): Core Driver Initialization Time 19.38798583 Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): 000019.281423 hsic-baseband::safetyNet: port is not connected Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: try to create blob Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: blob written Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 ping_configd: Not setting host name, it already has one: Pete's iPod Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 lookup_baseband_info_new: radio not ready: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says the device is: [Activated], state is 3 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says we've previously registered: [1], state is 1 Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: now listening for CT notifications Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: we've registered for notifications, now make sure we didn't miss one... Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): Posting 'com.apple.iokit.hid.displayStatus' notifyState=1 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): __IOHIDLoadBundles: Loaded 1 HID plugin Apr 8, 2012 10:08:19 PM - wifiFirmwareLoader [30] (Warning): [ 18.778 sec] Downloaded firmware, 192512 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 128 bytes of prox calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 1024 bytes of calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::attachBusGated(): Bus Driver Initialization Time 18.266927958 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore:attachBusGated(): Starting with MAC Address: 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANFirmwareManager::setNVRAMData(): received 778 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore: Ethernet address 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): Loading syscfg. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 56264 bytes of firmware data ("0x0084.bin") in 152ms. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AirPort: Enabled AppleBCMWLANCore (link 0, sys 0, user 0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANBusInterfaceHSIC::loadFirmware(): DL Ver: chip 0x4330, chiprev 0x4 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BCMWLAN Firmware Version: wl0: Dec 22 2011 19:03:58 version 5.95.45 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Firmware supports ap mode; enabling apsta feature (currently enabled) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): country code set to XX Apr 8, 2012 10:08:19 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCmdManager::processResponse(): Firmware Error "BCOM Unsupported" on command "WLC_SET_VAR: bus:txglom" (263). Transaction ID 3, length 0 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Glomming not supported on this device: BCOM Unsupported Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware: apsta set to 1 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::handleEventPacket(): WLC_E_FIFO_CREDIT_MAP,length 6 [9 2 5 3 2] Apr 8, 2012 10:08:19 PM - iapd [49] (Error): Timed out trying to acquire capabilities data. Apr 8, 2012 10:08:19 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:19 PM - com.apple.misd [63] (Notice): allowing special port forwarding for test fixtures Apr 8, 2012 10:08:19 PM - hpfd [50] (Notice): resource request { 'N94 ', ' ' } Apr 8, 2012 10:08:19 PM - mstreamd [43] (Notice): (Note ) mstreamd: mstreamd starting up. Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[44] Builtin profile: mediaserverd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[49] Builtin profile: iapd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[53] Builtin profile: dataaccessd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[60] Builtin profile: apsd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[66] Builtin profile: BTServer (sandbox) Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): mDNSResponder mDNSResponder-329.10 (Jan 15 2012 19:07:41) starting iOSVers 9 Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: SetDomainSecrets: no keychain support Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: Compiled without SnowLeopard Fine-Grained Power Management support Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): event logs in /private/var/.fseventsd out of sync with volume. destroying old logs. (10083 7 10090) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /private/var/.fseventsd getting new uuid: 8778E61A-0283-4067-B7DF-F75D109983D1 Apr 8, 2012 10:08:18 PM - fseventsd [51] (Error): failed to make the directory /.fseventsd (30/Read-only file system) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): could not open < (No such file or directory) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /tmp getting new uuid: 3919EB54-A54F-4289-864A-5158A25EF9DA Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.328610]: WiFi Preferences is up to date Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): D2DInitialize succeeded Apr 8, 2012 10:08:18 PM - fairplayd.N94 [52] (Notice): Vroum Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.537219]: WiFiManager starting, version: WiFiManager-260.9 Feb 4 2012 13:25:16 Apr 8, 2012 10:08:18 PM - configd [14] (Error): WiFi:[355640898.539342]: WiFiManager now available Apr 8, 2012 10:08:18 PM - keybagd [39] (Error): 3e828d98 main: System Keybag loaded Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [ 18.268 sec] Found AppleBCMWLANBusInterface; downloading FW.. Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/bcm94330OlympicUNO3.txt", file size = 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [ 18.276 sec] Sending NVRAM, 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/n94.trx", file size = 192512 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [ 18.300 sec] Sending firmware, 192512 bytes Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyEthernetMacAddress: got 00:f4:b9:2f:d9:8f from syscfg Apr 8, 2012 10:08:18 PM - mediaserverd [44] (Notice): 2012-04-08 10:08:18.817015 PM [AirTunes] HAL plugin started Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyBasebandBoardSnum: Could not convert baseband board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyWirelessBoardSnum: Could not convert wireless board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 lockstart_local: Build= 9B179 Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 _load_product_type: using Raptor Certs Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [ 17.590 sec] wlan AppleUSBHSICDevice found Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [ 17.590 sec] WLAN Enumeration attempt 0 / 6: Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [ 17.591 sec] Waiting for AppleBCMWLANBusInterface to enumerate... Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): MMS thread running Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): Communications Center Started. Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): STOP LOCATION UPDATE Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.704327]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.705542]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.706648]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.707418]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:15 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), RGB_CTRL (0x00000000) clk_down_ready is not set after 60 msecs Apr 8, 2012 10:08:14 PM - lockdownd [23] (Notice): 3e828d98 main: Starting Up Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 1 fHard: 1 swapBusy: 1 fController: 0 - 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_up_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): set_crc_notification_state 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 1 - 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x849d5000 0x876e8828 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), clock down RGBOUT Apr 8, 2012 10:08:14 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability Apr 8, 2012 10:08:14 PM - backupd [21] (Warning): INFO: Account changed (enabled=0, accountID=159665024) Apr 8, 2012 10:08:13 PM - kernel [0] (Debug): launchd[17] Builtin profile: ptpd (sandbox) Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): Factory called Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.157493]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158197]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158878]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Notice): (Note ) PIH: MCUEAPlugin initialized. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Error): Querying interface Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Notice): setting hostname to "Petes-iPod" Apr 8, 2012 10:08:13 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): TRACE: sending { command = kMBMessageAccountChanged; } Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Service starting... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Performing boot time checks. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: Checking for MDM installation... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: ...finished checking for MDM installation. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Checking for new carrier profile... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Installing new carrier profile. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Carrier profile has already been installed. Apr 8, 2012 10:08:12 PM - com.apple.launchd [1] (Warning): (com.apple.ptpd) The exception server is already claimed! Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: mitigation behavior enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: camera equations enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermal monitoring enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: registered for wake notification Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 0 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 1 to 546 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 2 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 3 to 6553 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 4 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 5 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 6 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 9 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 10 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor1 dithering level to 101% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor0 dithering level to 100% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set charge rate index to 0 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: HID not ready cannot set BL Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: setting thermal status level to 0 (0) [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set allowable transmit power limit to 24.000 dBm [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Error): CLTM: Could not close relay file Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermtgraphrelay is not present

Developer IT