Search Results

Search found 1613 results on 65 pages for 'peter nguyen'.

Page 25/65 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Varnish VCL not allowing two separate IP addresses as backends

  - by Peter Griffin

  Every time I attempt to add an extra back end into our VCL file, it's fails. Here is the DAEMON_OPTS we are running off: DAEMON_OPTS="-a :80 \ -T localhost:6082 \ -f /etc/varnish/custom.vcl \ -u varnish -g varnish \ -S /etc/varnish/secret \ -s malloc,10G" And here is the offending backend(s) backend default { .host = "114.123.456.789"; .port = "8080"; } backend alt { .host = "203.123.456.789"; .port = "80"; } Any Ideas ? Gut feeling is it might need the backends to be set somewhere, but I'm not sure where.

  Read the article

• How to get list of defined shortcut keys in the Start menu?

  - by Peter Mortensen

  How can I find out which keyboard shortcuts are defined inside the Start menu? And what shortcuts they are assigned to? Platform: Windows XP SP2 64 bit. Example: I open my main Visual Studio solution with a shortcut key, Ctrl+Alt+M. This is setup by having a shortcut inside the Start menu with: Target: "D:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe" D:\dproj\MSQall\MSQuant\MSQuant.sln Shortcut key: Ctrl+ALT+M If a new shortcut is added and its shortcut key is also set to Ctrl+Alt+M then there are now two shortcuts with the same shortcut key (conflict). To prevent this it would be nice to know which shortcut keys are already assigned and to which shortcuts.

  Read the article

• MS Paint: how to enter proper text?

  - by Peter Mortensen

  How do I enter normal text in Microsoft Paint? Normally I don't have any problems adding text to an image in Paint. But I ran into this problem: The text is supposed to be "abcdefd" (entered in a text editor and pasted). The same characters appear if typed directly. So apparently it is using some other character set. How do I restore normal operation? Platform: MS Paint 5.2, Windows XP Professional x64 SP2, 8 GB RAM.

  Read the article

• Gmail label search (and not) [closed]

  - by Peter Turner

  I wish that label:Receipts and not label:Red-Box worked, but it doesn't I want to delete all my redbox advertising, but keep my red-box receipts (which are doubly labeled). Seems easy but I could spend all day trying to figure out their syntax and am pretty sure that someone has the cheat sheet I couldn't find on their website.

  Read the article

• Word 2010 does not save as Word 2003 XML

  - by Peter

  I have a document which was created in Word 2010, but for use in a particular application, it needs to be saved in Word 2003 XML format. When I try the normal "Save as" via the File menu (choosing Word 2003 XML format to save as), Word 2010 thinks for a while, and then presents the "Save as" dialog to me again, suggesting that I save the document as .docx. Trying to get around this, I saved the document as .doc (i.e. Word 97-2003 document). This worked fine. But when I try to save this .doc file as Word 2003 XML, again Word 2010 thinks for a while, and then presents the "Save as" dialog, suggesting this time that I save the document as .doc. Oh, and I need to say that this only happens on a specific document - all others work fine. I know I should try a process of elimination and see what is causing the symptoms, but it would nice to have an answer "in principle". Is there perhaps a setting somewhere that I have enable? Does anyone know what's going on here?

  Read the article

• Reliable custom Windows shortcut keys?

  - by Peter Baer

  I have global Windows shortcut keys assigned to several different cmd.exe instances. I do this by creating shortcuts to cmd.exe on my desktop, and assigning each one a unique shortcut key (for example, CTRL + SHIFT + U). Pretty basic stuff. I'm using Win2K8 (R1 and R2). This works just fine... most of the time. But with infuriating regularity, sometimes it doesn't. Or it will work with a long delay (many seconds). It doesn't matter what app currently has focus (it can even be one of the command prompts). It doesn't matter what keys I assign (I've tried a few variations of WIN, CTRL and SHIFT). I did notice that this is often, but not always, correlated with explorer.exe struggling in some way or another (say, an explorer window opened to a file share that's unavailable, or an app being unresponsive, or whatever). In other words the shortcut key handling appears to be very sensitive to unrelated system activity. Note that whenever I have this problem I can always successfully ALT + TAB to the window I want to get to, but that's tedious. I use the shortcuts to these command windows hundreds of times a day so even a 1% failure rate becomes really annoying. Is there a way to fix this, or is there some third-party utility out there that will RELIABLY intercept custom key combinations to bring focus to whatever apps I want, in a way that is independent of other system activity? ADDENDUM: There is a property of the Windows shortcuts that I would not want to lose if switching to a third-party hotkey tool: Windows shortcuts are idempotent. Once you've launched a shortcut to some app, pressing the shortcut key combo again takes you to the already launched process - it does not launch a new process.

  Read the article

• How do I change the default browser in lotus notes when opening links in emails?

  - by peter

  I can't seem to figure out how to change the default browser for email/sametime links from opening with lotus notes to say chrome/firefox/ie. All links open with a new tab in lotus notes, which always gives scripting errors as it appears to be using ie as it's rendering engine to open up webpages. Is there something in the preferences that I'm missing that I'm not seeing? I've hunted around for awhile and am not seeing an option to change it. I've also tried to change it within the internet options for default applications, but nothing's working. I'm using lotus notes 8 on windows xp if that helps anyone helping me.

  Read the article

• Can't access files on external drive after reformatting Macbook Pro

  - by Peter Wells

  I recently had to reformat my Macbook Pro, and imported my account and settings from Time Machine via the Migration Assistant. Everything on the Mac itself is fine, but now I don't have permission to access almost everything on my external drive. A number of folders have the little red 'no access' sign on them and I can't rename or move anything. Looking at the info for these files, it appears that access rights were attached only to my old user account. Is there some way to reassign these files and folders to my new user account? Thanks.

  Read the article

• Windows 7 - File Type config

  - by Peter Boughton

  In XP, I could go ToolsOptionsFile Types and modify descriptions, icons and actions. Does this still exist in Windows 7? I'm not finding anything explicitly saying so, but there are lots of recommendations to download assorted random software to do it. There must be a way to change this without having to use third party stuff?

  Read the article

• Cobbler 2.2.2 problems

  - by Peter

  I have setup a dedicated LAN for Cobbler tests. My setup is: Cobbler server: openSUSE 12.3, cobbler 2.2.2 (from openSUSE repos) Imported distros: Centos 6.5, Red Hat 6.5, Red Hat 7.0, openSUSE 13.1 Target Machine: VMs in a Windows 7 Virtualbox Systems provisioning works OK, but I have some problems. The first one is that cobbler does not honor the "pxe_just_once: 1" setting. When the setup of the target OS is finished, after the reboot the target systems continues to PXE boot! The second problem is that the target server is not correctly configured! See my setup: cobbler system report --name=test Name : test TFTP Boot Files : {} Comment : Fetchable Files : {} Gateway : 192.168.0.1 Hostname : testcob1.example.com Image : IPv6 Autoconfiguration : False IPv6 Default Device : Kernel Options : {} Kernel Options (Post Install) : {} Kickstart : <<inherit>> Kickstart Metadata : {} LDAP Enabled : False LDAP Management Type : authconfig Management Classes : [] Management Parameters : <<inherit>> Monit Enabled : False Name Servers : ['192.168.0.1', '8.8.8.8'] Name Servers Search Path : [] Netboot Enabled : False Owners : ['admin'] Power Management Address : Power ID : Power Password : Power Management Type : ipmitool Power Username : Profile : RHEL-6.5-x86_64 Proxy : <<inherit>> Red Hat Management Key : <<inherit>> Red Hat Management Server : <<inherit>> Repos Enabled : False Server Override : <<inherit>> Status : testing Template Files : {} Virt Auto Boot : <<inherit>> Virt CPUs : <<inherit>> Virt Disk Driver Type : <<inherit>> Virt File Size(GB) : <<inherit>> Virt Path : <<inherit>> Virt RAM (MB) : <<inherit>> Virt Type : <<inherit>> Interface ===== : eth0 Bonding Opts : Bridge Opts : DHCP Tag : DNS Name : Master Interface : Interface Type : IP Address : 192.168.0.200 IPv6 Address : IPv6 Default Gateway : IPv6 MTU : IPv6 Secondaries : [] IPv6 Static Routes : [] MAC Address : Management Interface : True MTU : Subnet Mask : 255.255.255.0 Static : True Static Routes : [] Virt Bridge : So, although I have setup the hostname and the network interface of the target system, after the setup, the hostname is set to localhost.localdomain and eth0 is configured as a DHCP not static! How can I find the problem and fix it? Note that I have synced and restarted cobbler a couple of times, but the problems persists.

  Read the article

• Less reboots on Windows Server Core, is this true or just a myth?

  - by Peter Hahndorf

  Because there are less components installed on a Windows Server core OS, it needs less patches than the full OS. I read in several places that therefor it needs less reboots after patching. I'm running Server 2012 core in production since September 2012 now and I don't remember a single patch-Tuesday when I did not have to reboot the server after installing Windows updates. Are there any hard numbers out there that compare the required reboots for core vs. Full OS? Less reboots may be the main reason why people choose to go with Server core. If it actually requires just as many reboots as the full OS install, they may think again the next time they set up a server.

  Read the article

• Internet Explorer 8 only running as process not application

  - by Lord Peter

  Internet Explorer 8 on XP SP3 starts without browser window. Task manager doesn't show application, but iexplore.exe is listed twice in process window. Process Explorer reports "no visible windows found for this process" when I try to "bring to front" in the iexplore.exe properties dialog. Have reinstalled (twice), full scanned with MBAM/MSSE/SpyBot etc, re-registered ieproxy.dll (another Google-inspired tip!), run without addons (-extoff switch), and still same problem. Recently uninstalled VMWare Player and wondered whether problem related to VM network adapter somehow, but Firefox still works perfectly. This is one of my home machines, not critical, and it is backed up, so I will restore if I have to. But any and all suggestions will be gratefully received. It would be nice to understand what might have happened, and perhaps others may benefit from any knowledge that comes to light.

  Read the article

• Is it possible to make Ctrl+C as responsive as Ctrl+Break in the Windows 7 console?

  - by Peter Graham

  Is it possible to make Ctrl+C act like Ctrl+Break in the Windows 7 cmd.exe console? By default Ctrl+C seems to only send a signal the next time the input buffer is read, where Ctrl+Break sends a signal immediately. This makes Ctrl+C useless for ending processes because when I want to end a process I want to end it immediately. I'm using Ctrl+Break for now but it's far harder to type. It looks like in DOS you can add BREAK=ON to CONFIG.SYS to achieve this, but not in Windows 7?

  Read the article

• Address already in use - Amazon AWS

  - by Peter

  I've run into a really weird issue. I was debugging a server 500 error script on our EC2 instance and found that we didn't have ioncube loaders installed. So I went to go install them and I created a new file at /etc/php.d/zend.ini and initially I inserted the value of extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so and restarted httpd at which point it told me: The ionCube Loader is a Zend-Engine extension and not a module Please specify the Loader using 'zend_extension' in php.ini PHP Fatal error: Unable to start ionCube Loader module in Unknown on line 0 So I changed the contents of zend.ini to zend_extension=/usr/...etc. Now when I attempt to restart httpd I get this error: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs I can't even run /etc/init.d/httpd stop without it erroring. I've since removed zend.ini to see if that's what caused it and it doesn't seem to be. Any ideas?

  Read the article

• IE9 freezes with Protected Mode enabled

  - by Peter Wone

  After a disk failure and a new build of Win7, IE9 locks up on most web pages including Bing. Running it as Admin works, and turning off Protected Mode also works. Neither of these was necessary prior to the rebuild and examination of colleagues' workstation config show that it's only my workstation with this quirk. Can anyone suggest a remedy? I have tried bcdedit /set {current} nx AlwaysOff and a reboot, with no effect.

  Read the article

• Spreadsheet application that can handle big data OS X

  - by Peter

  I've been working with Excel for quite a while for some statistical analysis that I do regularly. The size of the data that I'm working with has gotten much larger as of late, however. The layout of the databases in question is quite simple, usually just three rows which includes a UNIX timestamp, and EST value, a proprietary numeric value and finally an average of the rows that have a timestamp +/- 1000 that row's timestamp (little AVERAGEIFS() formula). That formula and the EST conversion are the only formulas in the sheet. I'm beginning to work with files with 500,000+ rows. Running the average formula down the entire row takes forever. The end result is the production of print-worthy graphs. I'm looking for either a UNIX CL utility or separate spreadsheet/database application that can handle this amount of data without melting my CPU or making me wait an hour. Is there anything out there? TL;DR: Simple excel sheet with over half a million rows is getting too slow to work with. OS X alternatives?

  Read the article

• Why am I getting 'undefined method' exceptions when executing 'run_list add', 'run_list remove' and 'rackspace server delete'?

  - by Peter Groves

  [Originally posted this to opscode forum, got no response] I’m testing out a free hosted chef-server account and multiple subcommands are failing with ‘Unexpected Errors’. Perhaps my version and the server version are incompatible? OS: Ubuntu 12.04LTS Local Chef: 10.12.0 (Installed through gem) Local Ruby: 1.8.7 Also, the workstation machine has been manually configured, but the client(s) I’ve been experimenting with are launched with the Rackspace plugin (using ‘knife rackspace server create…’) The problem commands seem to fail when talking to the host chef-server, however, before it ever tries to modify the client, so I don’t believe that’s where the problem exists. The virtual-servers that are launched by ‘knife rackspace server create’ are launched properly but then deleting them with knife fails. If I include a recipe in the run_list when I create the server, the recipe is properly added to the run_list. If I try to add it later or remove the one that there server was initialized with, those commands fail. Here is the output of a few relevant commands (with stacktraces): https://gist.github.com/7100ada3fd6690113697

  Read the article

• Linux Mint Debian Cinammon soundcard selection

  - by Peter Gridling

  i use said OS and i am missing a window or setting to set the default soundcard. I have a builtin analog soundcard which works just fine and is set as default, also i have a usb headset which works fine eg. with mumble i set input and output on my headset and it just works, also the mute button and volume control on the headset works, but on the default soundcard lol. what i am missing is to set my headset as the default soudcard. i also tried some stuff from there: http://wiki.debian.org/ALSA/ but it seems that alsa is not supported 100% :( some1 here to help? best regards

  Read the article

• Application Virtualization

  - by Peter Versnee

  I have been looking for a solution to virtualize my desktop application as a SaaS. After picking Citrix XenApp as the best solution for my case and trying for ever to get it to work (with some more experienced people) I can't help but to conclude that Citrix has too much problems for my case. Every time I fix one thing some other thing pops up. As I can't imagine Citrix XenApp is the only way to deliver my application to my clients, I'd like to ask you experienced guys if you think there is an other way to deliver it whilst meeting my requirements. I've got no money issues - time on the other hand... My requirements: My application must run on a windows server; The application should be virtualized with the application window only (no desktop); Content Redirection (my application is the only one virtualized, so PDF, DOC(X) etc. is on the users' system); Easy user management; SSO;* Cross platform (Windows, Linux, Mac OSX).* I truly hope I don't annoy you with another of the same question. I've tried to find the same question here and - obviously - didn't found it. *) these I can live without, however very much appreciated

  Read the article

• How do I get around restrictive email policies by ISP?

  - by Peter Turner

  Apparently we've been restricted (though packet filtering) to some arbitrarily small and untenable number of emails a day by some bankrupt ISP (and they say that's how it's always been chortle). We've been using our own mail server for the last 15 years, and only recently they've been giving us guff. Is there a way for a legitimate business to email their clients, who really want to receive these emails, by bypassing the ISP? The way we've been doing it is by breaking up into 20 or 30 emails, but that gets complicated and requires a lot of manual labor by the receptionist, and unless she's really careful we wind up emailing lots of people twice. So what are my options (Hosted Email, Lithuanian Proxy Server, Different ISP, not writing awful PHP that sends out zillions of emails and gets us blacklisted)?

  Read the article

• Logfiles filling with iptables logging

  - by Peter I

  OS: Debian 6 Server Version I have different logfiles which are filling up: user@server:/var/log$ ls -lahS | head total 427G -rw-r--r-- 1 root root 267G Nov 2 17:29 bandwidth -rw-r----- 1 root adm 44G Nov 2 17:29 kern.log -rw-r----- 1 root adm 27G Nov 2 17:29 debug -rw-r----- 1 root adm 23G Oct 27 06:33 kern.log.1 -rw-r----- 1 root adm 17G Nov 2 17:29 messages -rw-r----- 1 root adm 14G Oct 27 06:33 debug.1 -rw-r----- 1 root adm 12G Nov 2 17:29 syslog -rw-r----- 1 root adm 12G Nov 1 06:26 syslog.1 -rw-r----- 1 root adm 9.0G Oct 27 06:33 messages.1 So I looked up the file /etc/iptables.up.rules which had those lines in it: -A FORWARD -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A FORWARD -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A OUTPUT -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A INPUT -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: So deleting those lines will solve my problem. But how would I edit those lines without losing their functionality?

  Read the article

• Emacs protection against simultaneous editing by same user

  - by Peter Eisentraut

  Emacs has elaborate protection against simultaneous editing by two different users. If there a way to have that same facility for protecting against simultaneous editing by the same user? With lots of windows and workspaces open, it's easy to reopen a file that you already have open somewhere else. But because it does not detect a lock conflict when you open the file, you will only learn about the collision when you save.

  Read the article

• How to migrate WinXP from failing old HD to new one

  - by Péter Török

  Following this issue, we have all our important data backed up now. I also bought and installed a new replacement hard disk (WD 160GB PATA) as secondary (slave) drive. I created two primary NTFS partitions on it: a 40 GB system partition, and a 110GB data partition. In theory I could start reinstalling WinXP from scratch on the new system partition, then copying over all user data from the old drive to the new data partition. Once this is done, I could even throw away the old drive, or keep it just to see what happens. (Note: I don't want to clone the whole drive as it contains a dual boot setup with an old Linux installation which I don't need anymore, and anyway, a fresh reinstall would do WinXP good to get rid of many years' clutter.) However, I am lazy :-) The old HD is still functioning, the problem has not manifested again since. So I feel there is no need to hurry with a complete OS reinstall. What I don't know though is whether I will be able to install WinXP on the new system partition at a later stage without affecting the contents of the data partition on the same drive. If this is possible, I can just move over all our data to the new data partition to have it safe, then continue running WinXP from the old drive as long as it works. Does anyone see any problems/risks with this plan?

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >