Search Results

Search found 1967 results on 79 pages for 'round robin'.

Page 25/79 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • NIC Bonding/balance-rr with Dell PowerConnect 5324

    - by Branden Martin
    I'm trying to get NIC bonding to work with balance-rr so that three NIC ports are combined, so that instead of getting 1 Gbps we get 3 Gbps. We are doing this on two servers connected to the same switch. However, we're only getting the speed of one physical link. We are using 1 Dell PowerConnect 5324, SW version 2.0.1.3, Boot version 1.0.2.02, HW version 00.00.02. Both servers are CentOS 5.9 (Final) running OnApp Hypervisor (CloudBoot) Server 1 is using ports g5-g7 in port-channel 1. Server 2 is using ports g9-g11 in port-channel 2. Switch show interface status Port Type Duplex Speed Neg ctrl State Pressure Mode -------- ------------ ------ ----- -------- ---- ----------- -------- ------- g1 1G-Copper -- -- -- -- Down -- -- g2 1G-Copper Full 1000 Enabled Off Up Disabled Off g3 1G-Copper -- -- -- -- Down -- -- g4 1G-Copper -- -- -- -- Down -- -- g5 1G-Copper Full 1000 Enabled Off Up Disabled Off g6 1G-Copper Full 1000 Enabled Off Up Disabled Off g7 1G-Copper Full 1000 Enabled Off Up Disabled On g8 1G-Copper Full 1000 Enabled Off Up Disabled Off g9 1G-Copper Full 1000 Enabled Off Up Disabled On g10 1G-Copper Full 1000 Enabled Off Up Disabled On g11 1G-Copper Full 1000 Enabled Off Up Disabled Off g12 1G-Copper Full 1000 Enabled Off Up Disabled On g13 1G-Copper -- -- -- -- Down -- -- g14 1G-Copper -- -- -- -- Down -- -- g15 1G-Copper -- -- -- -- Down -- -- g16 1G-Copper -- -- -- -- Down -- -- g17 1G-Copper -- -- -- -- Down -- -- g18 1G-Copper -- -- -- -- Down -- -- g19 1G-Copper -- -- -- -- Down -- -- g20 1G-Copper -- -- -- -- Down -- -- g21 1G-Combo-C -- -- -- -- Down -- -- g22 1G-Combo-C -- -- -- -- Down -- -- g23 1G-Combo-C -- -- -- -- Down -- -- g24 1G-Combo-C Full 100 Enabled Off Up Disabled On Flow Link Ch Type Duplex Speed Neg control State -------- ------- ------ ----- -------- ------- ----------- ch1 1G Full 1000 Enabled Off Up ch2 1G Full 1000 Enabled Off Up ch3 -- -- -- -- -- Not Present ch4 -- -- -- -- -- Not Present ch5 -- -- -- -- -- Not Present ch6 -- -- -- -- -- Not Present ch7 -- -- -- -- -- Not Present ch8 -- -- -- -- -- Not Present Server 1: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:55 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:28:ae USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:28:af USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.52.1 NETMASK=255.255.0.0 GATEWAY=10.200.2.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:55 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:ae Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:af Server 2: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:a7 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:30:30 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:30:31 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.53.1 NETMASK=255.255.0.0 GATEWAY=10.200.3.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:a7 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:30 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:31 Here are the results of iperf. ------------------------------------------------------------ Client connecting to 10.200.52.1, TCP port 5001 TCP window size: 27.7 KByte (default) ------------------------------------------------------------ [ 3] local 10.200.3.254 port 53766 connected with 10.200.52.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 950 MBytes 794 Mbits/sec

    Read the article

  • Using jQuery validation plugin with tabbed navigation

    - by user3438917
    I have a tabbed navigation wizard, for which the first section needs to be validated before proceeding to the next tab. The validation should trigger when the user hits the "next" button. I am unable to get the validation to trigger though: <form id="target-group" novalidate="novalidate"> <div class="box"> <div class='box-header-main'><h2><img src="assets/img/list.png" /> Target Group Information</h2></div> <br /> <div class='box'> <div class='box-header-property'><h2><span data-bind="text:Name">New Target Group</span> | <i class='fa fa-file'></i></h2></div> <br /> <div class='row'> <div id='flight-wizard'> <div id='content' class='col-lg-12'> <div class='col-lg-12'> <div id='tabs'> <ul> <li id="targetgroup-info-tab"><a href='#tabs-1'><i class="fa fa-info-circle"></i>Target Group Info</a></li> <li id="zone-tab"><a href='#tabs-2'><i class="fa fa-map-marker"></i>Zones</a></li> </ul> <div id='tabs-1'> <div class='row'> <div class='col-xs-6'> <div class='form-group'> Name<sup>*</sup> <input id="selectError0" name="name" class='form-control col-xs-12' data-bind="value: asdf" placeholder='Enter Name ...' /> </div> <form class='form-horizontal'> <div class='form-group'> Product(s)<sup>*</sup> <div class='controls' id='products'> <select id='selectError3' class='form-control' data-bind="options:test, optionsText: 'Name', optionsValue : 'test', value: test, optionsCaption: 'Choose Product...'"></select> </div> </div> </form> </div> <!--RIGHT PANE--> <div class='col-xs-6'> <div class='form-group'> Platform<sup>*</sup> <div class='controls'> <select id="selectError2" class='form-control' data-bind="options:test, optionsText: 'Name', optionsValue: 'test', value : test, optionsCaption: 'Choose Platform...'"></select> </div> </div> <form class='form-horizontal'> <div class='form-group'> AdTypes(s)<sup>*</sup> <div class='controls' id='adtypes'> <select multiple="" id='adtypesselect' class='form-control' data-rel="chosen" data-bind="options:test, optionsText: 'Name', optionsValue : 'test', selectedOptions: test, optionsCaption: 'test...'"></select> </div> </div> </form> <button id="btn_cancel_large" class='btn btn-large btn-primary btn-round'><i class='fa fa-ban' /></i> Cancel</button> <button id="btn-next-large" class='btn btn-large btn-primary btn-round'>Next <i class='fa fa-arrow-circle-right'></i></button> </div> <!--end of right pane--> </div> </div> <div id='tabs-2'> <div class='row'> <div class='col-lg-12'> <div class='row'> <div class='col-lg-12'> <div id='zones_list' class='box-content'> <div id='add-new-targetgroupzone' class='add-new'><i class='fa fa-plus-circle'></i><a href='/#/inventory/targeting/' onclick="return false;">Add Zone</a></div> <table id="results" width="100%"> <thead> <tr> <th>Publisher</th> <th>Property</th> <th>Zone</th> <th>AdTypes</th> <th width='10%'>Quick&nbsp;Actions</th> </tr> </thead> </table> </div> </div> </div> </div> </div> <br /> <div class="btn_row"> <button id="btn_cancel_large2" class='btn btn-large btn-primary btn-round'><i class='fa fa-ban' /></i> Cancel</button> <button id="btn-submit-large" class='btn btn-large btn-primary btn-round'>Submit <i class='fa fa-arrow-circle-down'></i></button> </div> </div> </div> </div> </div> </div> </div> </div> </div> </form> <form id="zones-form" style="display: none;" novalidate="novalidate" class="slideup-form"> <div class="box"> <div class="box-header-panel"> <h2>Add Target Group Zone</h2> <div class="box-icon" id="zones-form-close"> <i class="fa fa-arrow-circle-down"></i> </div> </div> <div class="box-content clearfix"> <div class="box-content"> <table id="zones-list" width="100%"> <thead> <tr> <th>Publisher</th> <th>Property</th> <th>Zone</th> <th>AdTypes</th> <th width='10%'>Quick&nbsp;Actions</th> </tr> </thead> </table> </div> </div> </div> </div> </form> jQuery: $("#target-group").validate({ rules: { name: { required: true } }, messages: { name: "Name required", } }); $('#btn-next-large').click(function () { if ($('#target-group').valid()) $tabs.tabs('select', $(this).attr("rel")); });

    Read the article

  • Instructions on how to configure a WebLogic Cluster and use it with Oracle Http Server

    - by Laurent Goldsztejn
    On October 17th I delivered a webcast on WebLogic Clustering that included a demo with Apache as the proxy server.  I realized that many steps are needed to set up the configuration I used during the demo.  The purpose of this article is to go through these steps to show how quickly and easily one can define a new cluster and then proxy requests via an Oracle Http Server (OHS). The domain configuration wizard offers the option to create a cluster.  The administration console or WLST, the Weblogic scripting tool can also be used to define a new cluster.  It can be created at any time but the servers that will participate in it cannot be in a running state. Cluster Creation using the configuration wizard Network and architecture requirements need to be considered while choosing between unicast and multicast. Multicast Vs. Unicast with WebLogic Clustering is of great help to make the best decision between the two messaging modes.  In addition, Configure Cluster offers details on each single field displayed above. After this initial configuration page, individual servers could be assigned to this newly created cluster although servers can be added later to the cluster.  What is not recommended is for the Admin server to participate in a cluster as the main purpose of the Admin server is to perform the bulk of the processing for the domain.  Servers need to stop before being assigned to a cluster.  There is also no minimum number of servers that have to participate in the cluster. At this point the configuration should be done and the cluster created successfully.  This can easily be verified from the console. Each clustered managed server can be launched to join the cluster.   At startup the following messages should be logged for each clustered managed server: <Notice> <WeblogicServer> <BEA-000365> <Server state changed to STARTING> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using messaging_mode cluster messaging> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of cluster_name>  It's time to try sending requests to the cluster and we will do this with the help of Oracle Http Server to play the role of a proxy server to demonstrate load balancing.  Proxy Server configuration  The first step is to download Weblogic Server Web Server Plugin that will enhance the web server by handling requests aimed at being sent to the Weblogic cluster.  For our test Oracle Http Server (OHS) will be used.  However plug-ins are also available for Apache Http server, Microsoft Internet Information Server (IIS), Oracle iPlanet Webserver or even WebLogic Server with the HttpClusterServlet. Once OHS is installed on the system, the configuration file, mod_wl_ohs.conf, will need to be altered to include Weblogic proxy specifics. First of all, add the following directive to instruct Apache to load the Weblogic shared object module extracted from the plugins file just downloaded. LoadModule weblogic_module modules/mod_wl_ohs.so and then create an IfModule directive to encapsulate the following location block so that proxy will be enabled by path (each request including /wls will be directed directly to the WebLogic Cluster).  You could also proxy requests by MIME type using MatchExpression in the Location block. <IfModule weblogic_module> <Location /wls>    SetHandler weblogic-handler    PathTrim /wls    WebLogicCluster MS1_URL:port,MS2_URL:port    Debug ON    WLLogFile        c:/tmp/global_proxy.log     WLTempDir        "c:/myTemp"    DebugConfigInfo  On </Location> </IfModule> SetHandler specifies the handler for the plug-in module  PathTrim will instruct the plug-in to trim /w ls from the URL before forwarding the request to the cluster. The list of WebLogic Servers defined in WeblogicCluster could contain a mixed set of clustered and single servers.  However, the dynamic list returned for this parameter will only contain valid clustered servers and may contain more servers if not all clustered servers are listed in WeblogicCluster. Testing proxy and load balancing It's time to start OHS web server which should at this point be configured correctly to proxy requests to the clustered servers.  By default round-robin is the load balancing strategy set by WebLogic. Testing the load balancing can be easily done by disabling cookies on your browser given that a request containing a cookie attempts to connect to the primary server. If that attempt fails, the plug-in attempts to make a connection to the next available server in the list in a round-robin fashion.  With cookies enabled, you could use two different browsers to test the load balancing with a JSP page that contains the following: <%@ page contentType="text/html; charset=iso-8859-1" language="java"  %>  <%  String path = request.getContextPath();   String getProtocol=request.getScheme();   String getDomain=request.getServerName();   String getPort=Integer.toString(request.getLocalPort());   String getPath = getProtocol+"://"+getDomain+":"+getPort+path+"/"; %> <html> <body> Receiving Server <%=getPath%> </body> </html>  Assuming that you name the JSP page Test.jsp and the webapp that contains it TestApp, your browsers should open the following URL: http://localhost/wls/TestApp/Test.jsp  Each browser should connect to a different clustered server and this simple JSP should confirm that.  The webapp that contains the JSP needs to be deployed to the cluster. You can also verify that the load is correctly balanced by looking at the proxy log file.  Each request generates a set of log entries that starts with : timestamp ================New Request: Each request is associated with a primary server and a secondary server if one is available.  For our test request, the following entries should appear in the log as well:Using Uri /wls/TestApp/Test.jsp After trimming path: '/TestApp/Test.jsp' The final request string is '/TestApp/Test.jsp' If an exception occurs, it should also be logged in the proxy log file with the prefix:timestamp *******Exception type   WeblogicBridgeConfig DebugConfigInfo enables runtime statistics and the production of configuration information.  For security purposes, this parameter should be turned off in production. http://webserver_host:port/path/xyz.jsp?__WebLogicBridgeConfig will display a proxy bridge page detailing the plugin configuration followed by runtime statistics which could help in diagnosing issues along with the analyzing of the proxy log file.  In our example the url would be: http://localhost/wls/TestApp/Test.jsp?__WebLogicBridgeConfig  Here is how the top section of the screen can look like: The bottom part of the page contains runtime statistics, here is a snippet of it (unrelated with the previous JSP example).   This entire plugin configuration should be very similar with other web servers, what varies is the name of the proxy server configuration file. So, as you can see, it only takes a few minutes to configure a Weblogic cluster and get servers to join it. 

    Read the article

  • File Fix-it codegolf (GCJ 2010 1B-A)

    - by KirarinSnow
    Last year (2009), the Google Code Jam featured an interesting problem as the first problem in Round 1B: Decision Tree As the problem seemed tailored for Lisp-like languages, we spontaneously had an exciting codegolf here on SO, in which a few languages managed to solve the problem in fewer characters than any Lisp variety, using quite a number of different techniques. This year's Round 1B Problem A (File Fix-it) also seems tailored for a particular family of languages, Unix shell scripts. So continuing the "1B-A tradition" would be appropriate. :p But which language will end up with the shortest code? Let us codegolf and see! Problem description (adapted from official page): You are given T test cases. Each test case contains N lines that list the full path of all directories currently existing on your computer. For example: /home/awesome /home/awesome/wheeeeeee /home/awesome/wheeeeeee/codegolfrocks /home/thecakeisalie Next, you are given M lines that list the full path of directories you would like to create. They are in the same format as the previous examples. You can create a directory using the mkdir command, but you can only do so if the parent directory already exists. For example, to create the directories /pyonpyon/fumufumu/yeahyeah and /pyonpyon/fumufumu/yeahyeahyeah, you would need to use mkdir four times: mkdir /pyonpyon mkdir /pyonpyon/fumufumu mkdir /pyonpyon/fumufumu/yeahyeah mkdir /pyonpyon/fumufumu/yeahyeahyeah For each test case, return the number of times you have to call mkdir to create all the directories you would like to create. Input Input consists of a text file whose first line contains the integer T, the number of test cases. The rest of the file contains the test cases. Each test case begins with a line containing the integers N and M, separated by a space. The next N lines contain the path of each directory currently existing on your computer (not including the root directory /). This is a concatenation of one or more non-empty lowercase alphanumeric strings, each preceded by a single /. The following M lines contain the path of each directory you would like to create. Output For each case, print one line containing Case #X: Y, where X is the case number and Y is the solution. Limits 1 = T = 100. 0 = N = 100. 1 = M = 100. Each path contains at most 100 characters. Every path appears only once in the list of directories already on your computer, or in the list of desired directories. However, a path may appear on both lists, as in example case #3 below. If a directory is in the list of directories already on your computer, its parent directory will also be listed, with the exception of the root directory /. The input file is at most 100,000 bytes long. Example Larger sample test cases may be downloaded here. Input: 3 0 2 /home/sparkle/pyon /home/sparkle/cakes 1 3 /z /z/y /z/x /y/y 2 1 /moo /moo/wheeeee /moo Output: Case #1: 4 Case #2: 4 Case #3: 0 Code Golf Please post your shortest code in any language that solves this problem. Input and output may be handled via stdin and stdout or by other files of your choice. Please include a disclaimer if your code has the potential to modify or delete existing files when executed. Winner will be the shortest solution (by byte count) in a language with an implementation existing prior to the start of Round 1B 2010.

    Read the article

  • sql perfomance on new server

    - by Rapunzo
    My database is running on a pc (AMD Phenom x6, intel ssd disk, 8GB DDR3 RAM and windows 7 OS + sql server 2008 R2 sp3 ) and it started working hard, timeout problems and up to 30 seconds long queries after 200 mb of database And I also have an old server pc (IBM x-series 266: 72*3 15k rpm scsi discs with raid5, 4 gb ram and windows server 2003 + sql server 2008 R2 sp3 ) and same query start to give results in 100 seconds.. I tried query analyser tool for tuning my indexed. but not so much improvements. its a big dissapointment for me. because I thought even its an old server pc it should be more powerfull with 15k rpm discs with raid5. what should I do. do I need $10.000 new server to get a good performance for my sql server? cant I use that IBM server? Extra information: there is 50 sql users and its an ERP program. There is my query ALTER FUNCTION [dbo].[fnDispoTerbiye] ( ) RETURNS TABLE AS RETURN ( SELECT MD.dispoNo, SV.sevkNo, M1.musteriAdi AS musteri, SD.tipTurId, TT.tipTur, SD.tipNo, SD.desenNo, SD.varyantNo, SUM(T.topMetre) AS toplamSevkMetre, MD.dispoMetresi, DT.gelisMetresi, ISNULL(DT.fire, 0) AS fire, SV.sevkTarihi, DT.gelisTarihi, SP.mamulTermin, SD.miktar AS siparisMiktari, M.musteriAdi AS boyahane, MD.akisNotu AS islemler, --dbo.fnAkisIslemleri(MD.dispoNo) DT.partiNo, DT.iplikBoyaId, B.tanimAd AS BoyaTuru, MAX(HD.hamEn) AS hamEn, MAX(HD.hamGramaj) AS hamGramaj, TS.mamulEn, TS.mamulGramaj, DT.atkiCekmesi, DT.cozguCekmesi, DT.fiyat, DV.dovizCins, DT.dovizId, (SELECT CASE WHEN DT.dovizId = 2 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 2 ORDER BY tarih DESC), 2) AS numeric(18, 2)) WHEN DT.dovizId = 3 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 3 ORDER BY tarih DESC), 2) AS numeric(18, 2)) WHEN DT.dovizId = 1 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 1 ORDER BY tarih DESC), 2) AS numeric(18, 2)) END AS Expr1) AS ToplamTLfiyat, DT.aciklama, MD.dispoNotu, SD.siparisId, SD.siparisDetayId, DT.sqlUserName, DT.kayitTarihi, O.orguAd, 'Çözgü=(' + (SELECT dbo.fnTipIplikler(SD.tipTurId, SD.tipNo, SD.desenNo, SD.varyantNo, 1) AS Expr1) + ')' + ' Atki=(' + (SELECT dbo.fnTipIplikler(SD.tipTurId, SD.tipNo, SD.desenNo, SD.varyantNo, 2) AS Expr1) + ')' AS iplikAciklama, DT.prosesOk, dbo.[fnYikamaTalimat](SP.siparisId) yikamaTalimati FROM tblDoviz AS DV WITH(NOLOCK) INNER JOIN tblDispoTerbiye AS DT WITH(NOLOCK) INNER JOIN tblTanimlar AS B WITH(NOLOCK) ON DT.iplikBoyaId = B.tanimId AND B.tanimTurId = 2 ON DV.id = DT.dovizId RIGHT OUTER JOIN tblMusteri AS M1 WITH(NOLOCK) INNER JOIN tblSiparisDetay AS SD WITH(NOLOCK) INNER JOIN tblDispo AS MD WITH(NOLOCK) ON SD.siparisDetayId = MD.siparisDetayId INNER JOIN tblTipTur AS TT WITH(NOLOCK) ON SD.tipTurId = TT.tipTurId INNER JOIN tblSiparis AS SP WITH(NOLOCK) ON SD.siparisId = SP.siparisId ON M1.musteriNo = SP.musteriNo INNER JOIN tblTip AS TP WITH(NOLOCK) ON SD.tipTurId = TP.tipTurId AND SD.tipNo = TP.tipNo AND SD.desenNo = TP.desen AND SD.varyantNo = TP.varyant INNER JOIN tblOrgu AS O WITH(NOLOCK) ON TP.orguId = O.orguId INNER JOIN tblMusteri AS M WITH(NOLOCK) INNER JOIN tblSevkiyat AS SV WITH(NOLOCK) ON M.musteriNo = SV.musteriNo INNER JOIN tblSevkDetay AS SVD WITH(NOLOCK) ON SV.sevkNo = SVD.sevkNo ON MD.mamulDispoHamSevkno = SV.sevkNo LEFT OUTER JOIN tblTop AS T WITH(NOLOCK) INNER JOIN tblDispo AS HD WITH(NOLOCK) ON T.dispoNo = HD.dispoNo AND T.dispoTuruId = HD.dispoTuruId ON SVD.dispoTuruId = T.dispoTuruId AND SVD.dispoNo = T.dispoNo AND SVD.topNo = T.topNo AND MD.siparisDetayId = HD.siparisDetayId ON DT.dispoTuruId = MD.dispoTuruId AND DT.dispoNo = MD.dispoNo LEFT OUTER JOIN tblDispoTerbiyeTest AS TS WITH(NOLOCK) ON DT.dispoTuruId = TS.dispoTuruId AND DT.dispoNo = TS.dispoNo --WHERE DT.gelisTarihi IS NULL -- OR DT.gelisTarihi > GETDATE()-30 GROUP BY MD.dispoNo, DT.partiNo, DT.iplikBoyaId, TS.mamulEn, TS.mamulGramaj, DT.gelisMetresi, DT.gelisTarihi, DT.atkiCekmesi, DT.cozguCekmesi, DT.fire, DT.fiyat, DT.aciklama, DT.sqlUserName, DT.kayitTarihi, SD.tipTurId, TT.tipTur, SD.tipNo, SD.desenNo, SD.varyantNo, SD.siparisId, SD.siparisDetayId, B.tanimAd, M.musteriAdi, M.musteriAdi, M1.musteriAdi, O.orguAd, TP.iplikAciklama, SD.miktar, MD.dispoNotu, SP.mamulTermin, DT.dovizId, DV.dovizCins, MD.dispoMetresi, MD.akisNotu, SV.sevkNo, SV.sevkTarihi, DT.prosesOk,SP.siparisId )

    Read the article

  • Updating D3 column chart with different values and different data sizes

    - by mbeasley
    Background I am attempting to create a reusable chart object with D3.js. I have setup a chart() function that will produce a column chart. On a click event on any of the columns, the chart will update with a new random data array that will contain a random number of data points (i.e. the original chart could have 8 columns, but upon update, could have 20 columns or 4 columns). Problem Say I have 8 data points (and thus 8 columns) in my original dataset. When I update the chart with random data, the columns appropriately adjust their height to the new values - but new bars aren't added. Additionally, while the width of the columns appropriately adjust to accommodate the width of the container and the new number of data points, if that number of data points is less than the original set, then some of those columns from the original dataset will linger until the number of data points is greater than or equal than the original. My end goal is to have new data dynamically added or old data outside of the range of the new data count dynamically removed. I've created a jsfiddle of the behavior. You may have to click the columns a couple of times to see the behavior I'm describing. Additionally, I've pasted my code below. Thanks in advance! function chart(config) { // set default options var defaultOptions = { selector: '#chartZone', class: 'chart', id: null, data: [1,2,6,4, 2, 6, 7, 2], type: 'column', width: 200, height: 200, callback: null, interpolate: 'monotone' }; // fill in unspecified settings in the config with the defaults var settings = $.extend(defaultOptions, config); function my() { // generate chart with this function var w = settings.width, h = settings.height, barPadding = 3, scale = 10, max = d3.max(settings.data); var svg = d3.select(settings.selector) // create the main svg container .append("svg") .attr("width",w) .attr("height",h); var y = d3.scale.linear().range([h, 0]), yAxis = d3.svg.axis().scale(y).ticks(5).orient("left"), x = d3.scale.linear().range([w, 0]); y.domain([0, max]).nice(); x.domain([0, settings.data.length - 1]).nice(); var rect = svg.selectAll("rect") .data(settings.data) .enter() .append("rect") .attr("x", function(d,i) { return i * (w / settings.data.length); }) .attr("y", function(d) { return h - h * (d / max); }) .attr("width", w / settings.data.length - barPadding) .attr("height", function(d) { return h * (d / max); }) .attr("fill", "rgb(90,90,90)"); svg.append("svg:g") .attr("class", "y axis") .attr("transform", "translate(-4,0)") .call(yAxis); svg.on("click", function() { var newData = [], maxCap = Math.round(Math.random() * 100); for (var i = 0; i < Math.round(Math.random()*100); i++) { var newNumber = Math.random() * maxCap; newData.push(Math.round(newNumber)); } newMax = d3.max(newData); y.domain([0, newMax]).nice(); var t = svg.transition().duration(750); t.select(".y.axis").call(yAxis); rect.data(newData) .transition().duration(750) .attr("height", function(d) { return h * (d / newMax); }) .attr("x", function(d,i) { return i * (w / newData.length); }) .attr("width", w / newData.length - barPadding) .attr("y", function(d) { return h - h * (d / newMax); }); }); } my(); return my; } var myChart = chart();

    Read the article

  • Thread not behaving correctly

    - by ivor
    Hello, I wonder if anyone can help me to understand where I could be going wrong with this code; Basically I'm working on a turorial and calling the class below from another class - and it is getting the following error; Exception in thread "Thread-1" java.lang.NullPointerException at org.newdawn.spaceinvaders.TCPChat.run(TCPChat.java:322) at java.lang.Thread.run(Unknown Source) I realise the error is beibg flagged in another class- but I have tested the other class with a small class which sets up a separate thread - and it works fine, but as soon as I try and implement a new thread in this class - it causes all sorts of problems. Am I setting up the thread correctly in this class? Basically I can set up a thread in this class, with a test loop and it's fine, but when I bring in the functionality of the rest of the game it sometimes hangs, or does not display at all. Any suggestions on where I could be going wrong would be greatly appreciated. Thanks for looking. package org.newdawn.spaceinvaders; import java.awt.BorderLayout; import java.awt.Canvas; import java.awt.Color; import java.awt.Dimension; import java.awt.FlowLayout; import java.awt.Graphics2D; import java.awt.GridLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyAdapter; import java.awt.event.KeyEvent; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import java.awt.image.BufferStrategy; import java.util.ArrayList; import java.util.Scanner; import java.awt.*;//maybe not needed import javax.swing.*;//maybenot needed import java.util.Random; //import java.io.*; /** * The main hook of our game. This class with both act as a manager * for the display and central mediator for the game logic. * * Display management will consist of a loop that cycles round all * entities in the game asking them to move and then drawing them * in the appropriate place. With the help of an inner class it * will also allow the player to control the main ship. * * As a mediator it will be informed when entities within our game * detect events (e.g. alient killed, played died) and will take * appropriate game actions. * * @author Kevin Glass */ public class Game extends Canvas implements Runnable{ /** The stragey that allows us to use accelerate page flipping */ private BufferStrategy strategy; /** True if the game is currently "running", i.e. the game loop is looping */ private boolean gameRunning = true; /** The list of all the entities that exist in our game */ private ArrayList entities = new ArrayList(); /** The list of entities that need to be removed from the game this loop */ private ArrayList removeList = new ArrayList(); /** The entity representing the player */ private Entity ship; /** The speed at which the player's ship should move (pixels/sec) */ private double moveSpeed = 300; /** The time at which last fired a shot */ private long lastFire = 0; /** The interval between our players shot (ms) */ private long firingInterval = 500; /** The number of aliens left on the screen */ private int alienCount; /** The number of levels progressed */ private double levelCount; /** high score for the user */ private int highScore; /** high score for the user */ private String player = "bob"; //private GetUserInput getPlayer; /** The list of entities that need to be removed from the game this loop */ /** The message to display which waiting for a key press */ private String message = ""; /** True if we're holding up game play until a key has been pressed */ private boolean waitingForKeyPress = true; /** True if the left cursor key is currently pressed */ private boolean leftPressed = false; /** True if the right cursor key is currently pressed */ private boolean rightPressed = false; /** True if we are firing */ private boolean firePressed = false; /** True if game logic needs to be applied this loop, normally as a result of a game event */ private boolean logicRequiredThisLoop = false; //private Thread cThread = new Thread(this); //public Thread t = new Thread(this); //private Thread g = new Thread(this); void setHighscore(int setHS) { highScore = setHS; } public int getHighscore() { return highScore; } public void setPlayer(String setPlayer) { player = setPlayer; } public String getPlayer() { return player; } public void run() { //setup(); System.out.println("hello im running bob"); /*int count = 1; do { System.out.println("Count is: " + count); count++; try{Thread.sleep(1);} catch(InterruptedException e){} } while (count <= 2000000);*/ //Game g =new Game(); //Game g = this; // Start the main game loop, note: this method will not // return until the game has finished running. Hence we are // using the actual main thread to run the game. //setup(); //this.gameLoop(); //try{thread.sleep(1);} //catch{InterruptedException e} } /** * Construct our game and set it running. */ public Game () { //Thread t = new Thread(this);//set up new thread for invaders game //t.run();//run the run method of the game //Game g =new Game(); //setup(); //Thread t = new Thread(this); //thread.start(); //SwingUtilities.invokeLater(this); Thread er = new Thread(this); er.start(); } public void setup(){ //initialise highscore setHighscore(0); // create a frame to contain our game JFrame container = new JFrame("Space Invaders 101"); // get hold the content of the frame and set up the resolution of the game JPanel panel = (JPanel) container.getContentPane(); panel.setPreferredSize(new Dimension(800,600)); //panel.setLayout(null); // setup our canvas size and put it into the content of the frame setBounds(0,0,800,600); panel.add(this); // Tell AWT not to bother repainting our canvas since we're // going to do that our self in accelerated mode setIgnoreRepaint(true); // finally make the window visible container.pack(); container.setResizable(false); container.setVisible(true); // add a listener to respond to the user closing the window. If they // do we'd like to exit the game container.addWindowListener(new WindowAdapter() { public void windowClosing(WindowEvent e) { //cThread.interrupt(); System.exit(0); } }); // add a key input system (defined below) to our canvas // so we can respond to key pressed addKeyListener(new KeyInputHandler()); // request the focus so key events come to us requestFocus(); // create the buffering strategy which will allow AWT // to manage our accelerated graphics createBufferStrategy(2); strategy = getBufferStrategy(); // initialise the entities in our game so there's something // to see at startup initEntities(); } /** * Start a fresh game, this should clear out any old data and * create a new set. */ private void startGame() { // clear out any existing entities and intialise a new set entities.clear(); initEntities(); //initialise highscore setHighscore(0); // blank out any keyboard settings we might currently have leftPressed = false; rightPressed = false; firePressed = false; } /** * Initialise the starting state of the entities (ship and aliens). Each * entitiy will be added to the overall list of entities in the game. */ //private void initEntities() { public void initEntities() { Random randomAlien = new Random(); // create the player ship and place it roughly in the center of the screen //ship = new ShipEntity(this,"sprites/ship.gif",370,550);//orignal ship = new ShipEntity(this,"sprites/ship.gif",700,300);//changed postioning to right hand side entities.add(ship); // create a block of aliens (5 rows, by 12 aliens, spaced evenly) alienCount = 0; levelCount = 1.02; for (int row=0;row<7;row++) {//altered number of rows for (int x=0;x<5;x++) { int r = randomAlien.nextInt(100);//loop added to produce random aliens if (r < 50){ //Entity alien = new AlienEntity(this,"sprites/alien.gif",/*100+*/(x*50),(50)+row*30); Entity alien = new AlienEntity(this,"sprites/alien.gif",100+(x*90),(12)+row*85); entities.add(alien); alienCount++; } } } } //private void initEntities() { public void initAlienEntities() { Random randomAlien = new Random(); // create the player ship and place it roughly in the center of the screen //ship = new ShipEntity(this,"sprites/ship.gif",370,550);//orignal //ship = new ShipEntity(this,"sprites/ship.gif",700,300);//changed postioning to right hand side //entities.add(ship); // create a block of aliens (5 rows, by 12 aliens, spaced evenly) alienCount = 0; levelCount = levelCount + 0.10;//this increases the speed on every level for (int row=0;row<7;row++) {//altered number of rows for (int x=0;x<5;x++) { int r = randomAlien.nextInt(100);//loop added to produce random aliens if (r < 50){//randome check to show alien //Entity alien = new AlienEntity(this,"sprites/alien.gif",/*100+*/(x*50),(50)+row*30); Entity alien = new AlienEntity(this,"sprites/alien.gif",-250+(x*90),(12)+row*85); entities.add(alien); alienCount++; } } } advanceAlienSpeed(levelCount); } /** * Notification from a game entity that the logic of the game * should be run at the next opportunity (normally as a result of some * game event) */ public void updateLogic() { logicRequiredThisLoop = true; } /** * Remove an entity from the game. The entity removed will * no longer move or be drawn. * * @param entity The entity that should be removed */ public void removeEntity(Entity entity) { removeList.add(entity); } /** * Notification that the player has died. */ public void notifyDeath() { message = "Oh no! They got you, try again?"; waitingForKeyPress = true; } /** * Notification that the player has won since all the aliens * are dead. */ public void notifyWin() { message = "Well done! You Win!"; waitingForKeyPress = true; } /** * Notification that an alien has been killed */ public void notifyAlienKilled() { // reduce the alient count, if there are none left, the player has won! alienCount--; if (alienCount == 0) { //notifyWin();win not relevant here... this.initAlienEntities();//call fresh batch of aliens } // if there are still some aliens left then they all need to get faster, so // speed up all the existing aliens advanceAlienSpeed(1.30); } public void advanceAlienSpeed(double speed) { // if there are still some aliens left then they all need to get faster, so // speed up all the existing aliens for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); if (entity instanceof AlienEntity) { // speed up by 2% entity.setHorizontalMovement(entity.getHorizontalMovement() * speed); //entity.setVerticalMovement(entity.getVerticalMovement() * 1.02); } } } /** * Attempt to fire a shot from the player. Its called "try" * since we must first check that the player can fire at this * point, i.e. has he/she waited long enough between shots */ public void tryToFire() { // check that we have waiting long enough to fire if (System.currentTimeMillis() - lastFire < firingInterval) { return; } // if we waited long enough, create the shot entity, and record the time. lastFire = System.currentTimeMillis(); ShotEntity shot = new ShotEntity(this,"sprites/shot.gif",ship.getX()+10,ship.getY()-30); entities.add(shot); } /** * The main game loop. This loop is running during all game * play as is responsible for the following activities: * <p> * - Working out the speed of the game loop to update moves * - Moving the game entities * - Drawing the screen contents (entities, text) * - Updating game events * - Checking Input * <p> */ public void gameLoop() { long lastLoopTime = System.currentTimeMillis(); // keep looping round til the game ends while (gameRunning) { // work out how long its been since the last update, this // will be used to calculate how far the entities should // move this loop long delta = System.currentTimeMillis() - lastLoopTime; lastLoopTime = System.currentTimeMillis(); // Get hold of a graphics context for the accelerated // surface and blank it out Graphics2D g = (Graphics2D) strategy.getDrawGraphics(); g.setColor(Color.black); g.fillRect(0,0,800,600); // cycle round asking each entity to move itself if (!waitingForKeyPress) { for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); entity.move(delta); } } // cycle round drawing all the entities we have in the game for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); entity.draw(g); } // brute force collisions, compare every entity against // every other entity. If any of them collide notify // both entities that the collision has occured for (int p=0;p<entities.size();p++) { for (int s=p+1;s<entities.size();s++) { Entity me = (Entity) entities.get(p); Entity him = (Entity) entities.get(s); if (me.collidesWith(him)) { me.collidedWith(him); him.collidedWith(me); } } } // remove any entity that has been marked for clear up entities.removeAll(removeList); removeList.clear(); // if a game event has indicated that game logic should // be resolved, cycle round every entity requesting that // their personal logic should be considered. if (logicRequiredThisLoop) { //g.drawString("Press any key",(800-g.getFontMetrics().stringWidth("Press any key"))/2,300); for (int i=0;i<entities.size();i++) { Entity entity = (Entity) entities.get(i); entity.doLogic(); } logicRequiredThisLoop = false; } // if we're waiting for an "any key" press then draw the // current message //show highscore at top of screen //show name at top of screen g.setColor(Color.white); g.drawString("Player : "+getPlayer()+" : Score : "+getHighscore(),20,20); if (waitingForKeyPress) { g.setColor(Color.white); g.drawString(message,(800-g.getFontMetrics().stringWidth(message))/2,250); g.drawString("Press any key",(800-g.getFontMetrics().stringWidth("Press any key"))/2,300); } // finally, we've completed drawing so clear up the graphics // and flip the buffer over g.dispose(); strategy.show(); // resolve the movement of the ship. First assume the ship // isn't moving. If either cursor key is pressed then // update the movement appropraitely ship.setVerticalMovement(0);//set to vertical movement if ((leftPressed) && (!rightPressed)) { ship.setVerticalMovement(-moveSpeed);//**took out setHorizaontalMOvement } else if ((rightPressed) && (!leftPressed)) { ship.setVerticalMovement(moveSpeed);//**took out setHorizaontalMOvement } // if we're pressing fire, attempt to fire if (firePressed) { tryToFire(); } // finally pause for a bit. Note: this should run us at about // 100 fps but on windows this might vary each loop due to // a bad implementation of timer try { Thread.sleep(10); } catch (Exception e) {} } } /** * A class to handle keyboard input from the user. The class * handles both dynamic input during game play, i.e. left/right * and shoot, and more static type input (i.e. press any key to * continue) * * This has been implemented as an inner class more through * habbit then anything else. Its perfectly normal to implement * this as seperate class if slight less convienient. * * @author Kevin Glass */ private class KeyInputHandler extends KeyAdapter { /** The number of key presses we've had while waiting for an "any key" press */ private int pressCount = 1; /** * Notification from AWT that a key has been pressed. Note that * a key being pressed is equal to being pushed down but *NOT* * released. Thats where keyTyped() comes in. * * @param e The details of the key that was pressed */ public void keyPressed(KeyEvent e) { // if we're waiting for an "any key" typed then we don't // want to do anything with just a "press" if (waitingForKeyPress) { return; } // if (e.getKeyCode() == KeyEvent.VK_LEFT) { ////leftPressed = true; ///} //// if (e.getKeyCode() == KeyEvent.VK_RIGHT) { //rightPressed = true; if (e.getKeyCode() == KeyEvent.VK_UP) { leftPressed = true; } if (e.getKeyCode() == KeyEvent.VK_DOWN) { rightPressed = true; } if (e.getKeyCode() == KeyEvent.VK_SPACE) { firePressed = true; } } /** * Notification from AWT that a key has been released. * * @param e The details of the key that was released */ public void keyReleased(KeyEvent e) { // if we're waiting for an "any key" typed then we don't // want to do anything with just a "released" if (waitingForKeyPress) { return; } if (e.getKeyCode() == KeyEvent.VK_UP) {//changed from VK_LEFT leftPressed = false; } if (e.getKeyCode() == KeyEvent.VK_DOWN) {//changed from VK_RIGHT rightPressed = false; } if (e.getKeyCode() == KeyEvent.VK_SPACE) { firePressed = false; } } /** * Notification from AWT that a key has been typed. Note that * typing a key means to both press and then release it. * * @param e The details of the key that was typed. */ public void keyTyped(KeyEvent e) { // if we're waiting for a "any key" type then // check if we've recieved any recently. We may // have had a keyType() event from the user releasing // the shoot or move keys, hence the use of the "pressCount" // counter. if (waitingForKeyPress) { if (pressCount == 1) { // since we've now recieved our key typed // event we can mark it as such and start // our new game waitingForKeyPress = false; startGame(); pressCount = 0; } else { pressCount++; } } // if we hit escape, then quit the game if (e.getKeyChar() == 27) { //cThread.interrupt(); System.exit(0); } } } /** * The entry point into the game. We'll simply create an * instance of class which will start the display and game * loop. * * @param argv The arguments that are passed into our game */ //public static void main(String argv[]) { //Game g =new Game(); // Start the main game loop, note: this method will not // return until the game has finished running. Hence we are // using the actual main thread to run the game. //g.gameLoop(); //} }

    Read the article

  • Sneak peek at next generation Three MiFi unit – Huawei E585

    - by Liam Westley
    Last Wednesday I was fortunate to be invited to a sneak preview of the next generation Three MiFi unit, the Huawei E585. Many thanks to all those who posted questions both via this blog or via @westleyl on Twitter. I think I made sure I asked every question posed to the MiFi product manager from Three UK, and so here's the answers you were after. What is a MiFi? For those who are wondering, a MiFi unit is a 3G broadband modem combined with a WiFi access point, providing 3G broadband data access to up to five devices simultaneously via standard WiFi connections. What is different? It appears the prime task of enhancing the MiFi was to improve the user experience and user interface, both in terms of the device hardware and within the management software to configure the device.  I think this was a very sensible decision as these areas had substantial room for improvement. Single button operation to switch on, enable WiFi and connect to 3G Improved OELD display (see below), replacing the multi coloured LEDs; including signal strength, SMS notifications, the number of connected clients and data usage Management is via a web based dashboard accessible from any web browser. This is a big win for those running Linux, Mac OS/X, iPad users and, for me, as I can now configure the device from Windows 7 64-bit Charging is via micro USB, the new standard for small USB devices; you cannot use your old charger for the new MiFi unit Automatic reconnection when regaining a signal Improved charging time, which should allow recharging of the device when in use Although subjective, the black and silver design does look more classy than the silver and white plastic of the original MiFi What is the same? Virtually the same size and weight The battery is the same unit as the original MiFi so you’ll have a handy spare if you upgrade Data plans remain the same as the current MiFi, so cheapest price for upgraders will be £49 pay as you go Still only works on 3G networks, with no fallback to GPRS or EDGE There is no specific upgrade path for existing three customers, either from dongle or from the original MiFi My opinion I think three have concentrated on the correct areas of usability and user experience rather than trying to add new whizz bang technology features which aren’t of interest to mainstream users. The one button operation and the improved device display will make it much easier to use when out and about. If the automatic reconnection proves reliable that will remove a major bugbear that I experienced the previous evening when travelling on the First Great Western line from Paddington to Didcot Parkway.  The signal was repeatedly lost as we sped through tunnels and cuttings, and without automatic reconnection is was a real pain to keep pressing the data button on the MiFi to re-establish my data connection. And finally, the web based dashboard will mean I no longer need to resort to my XP based netbook to configure the SSID and password. My everyday laptop runs Windows 7 64-bit which appears to confuse the older 3 WiFi manager which cannot locate the MiFi when connected. Links to other sites, and other images of the device Good first impressions from Ben Smith, http://thereallymobileproject.com/2010/06/3uk-announce-a-new-mifi-with-a-screen/ Also, a round up of other sneak preview posts, http://www.3mobilebuzz.com/2010/06/11/mifi-round-two-your-view/ Pictures Here is a comparison of the old MiFi device next to the new device, complete with OLED display and the Huawei logo now being a prominent feature on the front of the device. One of my fellow bloggers had a Linux based netbook, showing off the web based dashboard complete with Text messages panel to manage SMS. And finally, I never thought that my blog sub title would ever end up printed onto a cup cake, ... and here's some of the other cup cakes ...

    Read the article

  • XNA Notes 008

    - by George Clingerman
    This week has been a rough one. I’ve been sick and then in some kind of slump for my afternoon coding sessions. It could be from the cold, could be I’m still tired from writing that Windows Phone 7 game development book (which is out now!) or it could just be I’m tired of winter and want some sunshine. All I know is that even while I’m stick, the XNA world keeps going along at it’s whirlwind pace. Below are the things I caught in between my coughing fits.. Time Critical XNA News: The 2011 MVP summit is almost here so pass along your feelings and thoughts so the MVPs can take them and share them with the team in person http://forums.create.msdn.com/forums/p/76317/464136.aspx#464136 Dream Build Play - there’s no new announcement yet, but you can’t get much more to the end of February than this! http://www.dreambuildplay.com/Main/Home.aspx XNA Team: Dean Johnson from the XNA team shares an excellent way of handling Guide.IsTrialMode on WP7 http://blogs.msdn.com/b/dejohn/archive/2011/02/21/calling-guide-istrialmode-on-windows-phone-7.aspx Nick Gravelyn tries a new tactic in deciding if there’s enough interest to develop a sequel or not. Don’t YOU want Pixel Man 2 to come out? http://nickgravelyn.com/pixelman2/ XNA MVPs: Andy “The ZMan” Dunn finally shares what he’s been secretly working on these past 4 months http://twitter.com/#!/The_Zman/status/40590269392887808 http://www.youtube.com/watch?v=Rg8Z0ZdYbvg&feature=youtu.be Joel Martinez lets developers around NYC know they should by signing up for Game Hack Day http://twitter.com/joelmartinez/statuses/41118590862102528 http://gamehackday.org/71fdk XNA Developers: Michael McLaughlin shares an XNA RenderTarget2D Sample http://geekswithblogs.net/mikebmcl/archive/2011/02/18/xna-rendertarget2d-sample.aspx Martin Caine starts a new series on Deferred Rendering in XNA 4.0 http://twitter.com/#!/MartinCaine/status/39735221339291648 http://martincaine.com/xna/deferred_rendering_in_xna_4_introduction ElemenyCy posts about his fun time with the IntermediateSerializer http://www.ubergamermonkey.com/xna/holy-bloated-xml-batman/ Ben Kane releases a narrated dev diary video for Project Splice. Let him know if you’d like to see more! (I know I do!) http://twitter.com/#!/benkane/status/39846959498002432 http://www.youtube.com/watch?v=1EmziXZUo08&feature=youtu.be Jason Swearingen (of Novaleaf) posts his part 1 of Spatial Partitioning solutions http://altdevblogaday.org/2011/02/21/spatial-partitioning-part-1-survey-of-spatial-partitioning-solutions/ Brian Lawson of Dark Flow Studios shares what his been up to lately with lots of pretty screenshots and hints of announcements from Microsoft... http://www.darkflowstudios.com/entry/short-and-sweet-part-1 Luke Avery starts a new blog where he plans on making XNA tutorials for beginners (and he’s got a few started already!) http://programmingwithovery.wordpress.com/ Xbox LIVE Indie Games (XBLIG): GameMarx Episode 10 http://www.gamemarx.com/video/the-show/24/ep-10-february-18-2010.aspx Minecraft clone FortressCraft coming to XBLIG http://www.eurogamer.net/articles/2011-02-23-minecraft-clone-fortresscraft-hits-xblig ezMuze+ starts an IndieGoGo fundraiser campaign to help fund their second game and get it onto even more devices! http://www.indiegogo.com/ezmuze Gamergeddon XBLIG round up http://www.gamergeddon.com/2011/02/20/xbox-indie-game-round-up-february-20th/?utm_campaign=twitter&utm_medium=twitter&utm_source=twitter JForce Games loses their Ego http://jforcegames.com/blog/index.php?itemid=121&catid=4 XNA Game Development: @BallerIndustry reminds all XNA developers that the Maths are important ;) http://twitter.com/#!/BallerIndustry/status/39317618280243200 http://www.youtube.com/watch?v=MjV3XDFsjP4&feature=player_embedded#at=106 @suhinini stumbles on an older but extremely useful post on XNA Content Pipeline debugging http://twitter.com/#!/suhinini/status/39270189476352000 http://badcorporatelogo.wordpress.com/2010/10/31/xna-content-pipeline-debugging-4-0/ XNA Game Development Workshops at Singapore Universities http://innovativesingapore.com/2011/02/xna-game-development-workshops-at-singapore-universities/ Indiefreaks announces that IGF v0.3 is out with Xbox 360 support, SunBurn 2.0.12 and it’s now Open Source! http://twitter.com/#!/indiefreaks/status/39391953971982336 @liotral announces a new series on properly designing a game http://twitter.com/#!/liortal53/status/39466905081217024 http://liortalblog.wordpress.com/2011/02/20/hello-cosmos/ Indies and XNA at CodeStock 2011 http://www.gamemarx.com/news/2011/02/20/indies-and-xna-at-codestock-2011.aspx Train Frontier Express posts about XNA Content Hotloading http://trainfrontierexpress.blogspot.com/2011/02/xna-content-hotloading-overview.html Slyprid announces a new character editor in Transmute http://twitter.com/#!/slyprid/status/40146992818696192 http://www.youtube.com/watch?v=OKhFAc78LDs&feature=youtu.be The XNA 2D from the ground up tutorial series http://xna-uk.net/blogs/darkgenesis/archive/2011/02/23/recap-the-xna-2d-from-the-ground-up-tutorial-series.aspx Sgt.Conker posts a “Clingerman” (hey that’s me!) to stay relevant http://www.sgtconker.com/2011/02/posting-a-clingerman-to-stay-relevant/

    Read the article

  • default xna 4.0 gametime don´t works well for 2D physics

    - by EusKoder
    I am developing a game using Visual Studio 2010 and XNA 4.0, after advancing to some extent with the project (a platform based 2d platformer msdn starter kit) I got to test it on different computers with different hardware (CPU, graphics, etc.) and I found that the speed of movement object of the game is quite different, I implemented the PSK physics msdn that are based on time, /// <summary> /// Updates the player's velocity and position based on input, gravity, etc. /// </summary> public void ApplyPhysics(GameTime gameTime) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; Vector2 previousPosition = Position; // Base velocity is a combination of horizontal movement control and // acceleration downward due to gravity. velocity.X += movement * MoveAcceleration * elapsed; velocity.Y = MathHelper.Clamp(velocity.Y + GravityAcceleration * elapsed, -MaxFallSpeed, MaxFallSpeed); velocity.Y = DoJump(velocity.Y, gameTime); // Apply pseudo-drag horizontally. if (IsOnGround) velocity.X *= GroundDragFactor; else velocity.X *= GroundDragFactor; //velocity.X *= AirDragFactor; // Prevent the player from running faster than his top speed. velocity.X = MathHelper.Clamp(velocity.X, -MaxMoveSpeed, MaxMoveSpeed); // Apply velocity. Position += velocity *elapsed; Position = new Vector2((float)Math.Round(Position.X), (float)Math.Round(Position.Y)); // If the player is now colliding with the level, separate them. HandleCollisions(gameTime); // If the collision stopped us from moving, reset the velocity to zero. if (Position.X == previousPosition.X) velocity.X = 0; if (Position.Y == previousPosition.Y) { velocity.Y = 0; jumpTime = 0.0f; } } tested eg with a PC (PC1) 2.13GHz Intel Core 2 6400 / ATI Radeon HD 4670 and another one: (pc2) 3.00GHz Intel Pentium D / Intel 82945G Express Chipset Family by displacement difference (moving x axis at supossed (position = velocity * gametime.ElapsedGameTime.TotalSeconds) constant velocity, for example) is 3 seconds in a total of 20 (example: moving pc1 player sprite 6000 pixels in the x-axis at 20 seconds and pc 2 runs the same distance in 17 ). Tested on a 3rd PC: i72700k / Gigabyte GTX 560 TI the results are even worse, after some time after starting the game gets like 3 times slower and showing the number of pixels in each frame moved in a debug window in the game (counting updatespersecond with counter variable for updates cuantity and gametime for counting a second show 63fps), it appears as if the number is always constant ( refreshments lose the Update method?). In this pc if I put the game in fullscreen during the course of the game, the effect of "go slow" is immediate and restore window mode sometimes yield returns to "normal" and sometimes not. Eventually I began to try a new project to test whether the movement is constant in different pc loading only one sprite and its position value in screen printing. Occur The same. I even tried moving a constant amount of pixels explicitly (position + = 5) and different speeds in different pc quantities of pixels moved in x time. I have the game loop as the default (fixedTimeStep=true;SynchronizeWithVerticalRetrace=true;). I've also tried turning off and creating another timestep as discussed in different post (eg http://gafferongames.com/game-physics/fix-your-timestep/ but i can´t achieve the desired result, move the same number of pixels in X seconds on different computers with windows. All pc used for tests use windows 7 enterprise pc1 == x86 the others are x64. The weirdest thing is that I find information about people describing the same problem and that I wear long nights of searches. Thanks for your help.

    Read the article

  • Friday Fun: Spell Blazer

    - by Asian Angel
    Are you ready for some fun and adventure after a long week back at work? This week’s game combines jewel-matching style game play with an RPG story for an awesome mix of fun and fiction. Your goal is to help a young wizard reach the magic academy in Raven as the forces of darkness are building. Spell Blazer The object of the game is to help young Kaven reach the Lightcaster Academy in Raven alive, but he will encounter many dangers along the way. Are you ready to begin the quest? As soon as you click Start Game the intro will automatically begin. If this is your first time playing the game the intro provides a nice background story for the game and what is happening in the game environment. Once you are past the intro, you will see a map of the region with your starting point in the Farmlands, various towns and the roads connecting them, along with your final destination of Raven. Notice that some of the roads are different colors…those colors indicate the “danger levels” for each part of your journey (green = good, yellow = some danger, etc.). To begin your journey click on the Town of Goose with your mouse. You will encounter your first monster part of the way towards Goose. This first round takes you through the game play process step-by-step. Once you have clicked Okay you will see the details about the monster you have just encountered. It is very important that you do not click on Fight! or Flee! until viewing and noting the types of spells that the monster is resistant to or has a weakness against. Choose your spells wisely based on the information provided about the monster. Keep in mind that the healing spell can be very useful depending on the monster you meet and your current health status. Note: Spells shown in order here are Healing, Fireball, Icebolt, & Lightning. Ready to fight! The first battle will also explain how to fight…click Okay to get started. Once the main window is in full view there are details that you need to look at. Beneath each of the combatants you will see the three attacks that each brings to the battle and at the bottom you will see their respective health points. We got lucky and had an Icebolt attack that we could utilize on the first play! Note: You can exchange two squares without making a match in order to try and line up an attack. While it happened too quickly to capture in our screenshot, there will be cool lightning bolt effects shoot out from matched up squares to the opposite combatant. You will also see the amount of damage inflicted from a particular attack on top of the avatars. Victory! Once you have won a round of combat a window will appear showing the amount of gold coins left behind by the monster. When you reach a town you will have the opportunity to stop over and rest or directly continue on with your journey. On to Halgard after a good rest! Play Spell Blazer Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video] Convert or View Documents Online Easily with Zoho, No Account Required Build a Floor Scrubbing Robot out of Computer Fans and a Frisbee Serene Blue Windows Wallpaper for Your Desktop 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video]

    Read the article

  • OOW 2013 Summary for Fusion Middleware Architects & Administrators by Simon Haslam

    - by JuergenKress
    OOW 2013 Summary for Fusion Middleware Architects & Administrators by Simon Haslam This September during Oracle OpenWorld 2013 the weather in San Francisco, as you see can from the photo, was exceptionally sunny. The dramatic final few days of the Americas Cup sailing competition, being held every day in the bay, coincided with the conference and meant that there was almost a holiday feel to the whole event. Here's my annual round-up of what I think was most interesting at OpenWorld 2013 for Fusion Middleware architects and administrators; I hope you find it useful and if you think I've missed something please add a comment! WebLogic and Cloud Application Foundation (CAF) The big WebLogic release of the year has already happened a few months ago with 12.1.2 so I won't duplicate that here. Will Lyons discussed the WebLogic and Coherence roadmap which essentially is that 12.1.3 will probably be released to coincide with SOA 12c next year and that 12.1.4, the next feature-rich WebLogic release, is more likely to be in 2015. This latter release will probably include full Java EE 7 support, have enhancements for multi-tenancy and further auto-scaling features to support increased density (i.e. more WebLogic usage for the same amount of hardware). There's a new Oracle Virtual Assembly Builder (OVAB) out already and an Oracle Traffic Director (OTD) 12c release round the corner too. Also of relevance to administrators is that Oracle has increased the support lifetime for Fusion Middleware 11g (e.g. WebLogic 10.3.6) so that Premier Support will now run to the end of 2018 and Extended Support until 2021 - this should remove any Oracle-driven pressure to upgrade at least. Java Mission Control Java Mission Control (JMC) is the HotSpot Java 7 version of JRockit 6 Mission Control, a very nice performance monitoring tool from Oracle's BEA acquisition. Flight Recorder is a feature built into the JVM which records diagnostic events into, typically, a circular buffer which can then be used for historical analysis, particularly in the case of a JVM crash or hang. It's been available separately for WebLogic only for perhaps a year now but, more significantly, it now includes JVM events and was bundled in with JDK7 Update 40 a few weeks ago. I attended a couple of interesting Java One sessions on JMC/Flight Recorder and have to say it's looking really good - it has all the previous JRMC features except for memory leak detector, plus some enhancements around operative sets and ECID filtering I think. Marcus also showed how you could add your own events into flight recorder by building your own event class - they are then available for graphing alongside all the other events in JMC. This uses a currently an unsupported/undocumented API, but it's also the same one that WebLogic uses for WLDF events so I imagine it is stable. I'm not sure quite whether this would be useful to custom applications, as opposed to infrastructure services or ISV packaged applications, but it was a very nice demonstration. I've been testing JMC / FR enabling on several environments recently and my confidence is growing - it feels robust and I think could very soon be part of my standard builds. Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: OOW,Simon Haslam,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Fastest pathfinding for static node matrix

    - by Sean Martin
    I'm programming a route finding routine in VB.NET for an online game I play, and I'm searching for the fastest route finding algorithm for my map type. The game takes place in space, with thousands of solar systems connected by jump gates. The game devs have provided a DB dump containing a list of every system and the systems it can jump to. The map isn't quite a node tree, since some branches can jump to other branches - more of a matrix. What I need is a fast pathfinding algorithm. I have already implemented an A* routine and a Dijkstra's, both find the best path but are too slow for my purposes - a search that considers about 5000 nodes takes over 20 seconds to compute. A similar program on a website can do the same search in less than a second. This website claims to use D*, which I have looked into. That algorithm seems more appropriate for dynamic maps rather than one that does not change - unless I misunderstand it's premise. So is there something faster I can use for a map that is not your typical tile/polygon base? GBFS? Perhaps a DFS? Or have I likely got some problem with my A* - maybe poorly chosen heuristics or movement cost? Currently my movement cost is the length of the jump (the DB dump has solar system coordinates as well), and the heuristic is a quick euclidean calculation from the node to the goal. In case anyone has some optimizations for my A*, here is the routine that consumes about 60% of my processing time, according to my profiler. The coordinateData table contains a list of every system's coordinates, and neighborNode.distance is the distance of the jump. Private Function findDistance(ByVal startSystem As Integer, ByVal endSystem As Integer) As Integer 'hCount += 1 'If hCount Mod 0 = 0 Then 'Return hCache 'End If 'Initialize variables to be filled Dim x1, x2, y1, y2, z1, z2 As Integer 'LINQ queries for solar system data Dim systemFromData = From result In jumpDataDB.coordinateDatas Where result.systemId = startSystem Select result.x, result.y, result.z Dim systemToData = From result In jumpDataDB.coordinateDatas Where result.systemId = endSystem Select result.x, result.y, result.z 'LINQ execute 'Fill variables with solar system data for from and to system For Each solarSystem In systemFromData x1 = (solarSystem.x) y1 = (solarSystem.y) z1 = (solarSystem.z) Next For Each solarSystem In systemToData x2 = (solarSystem.x) y2 = (solarSystem.y) z2 = (solarSystem.z) Next Dim x3 = Math.Abs(x1 - x2) Dim y3 = Math.Abs(y1 - y2) Dim z3 = Math.Abs(z1 - z2) 'Calculate distance and round 'Dim distance = Math.Round(Math.Sqrt(Math.Abs((x1 - x2) ^ 2) + Math.Abs((y1 - y2) ^ 2) + Math.Abs((z1 - z2) ^ 2))) Dim distance = firstConstant * Math.Min(secondConstant * (x3 + y3 + z3), Math.Max(x3, Math.Max(y3, z3))) 'Dim distance = Math.Abs(x1 - x2) + Math.Abs(z1 - z2) + Math.Abs(y1 - y2) 'hCache = distance Return distance End Function And the main loop, the other 30% 'Begin search While openList.Count() != 0 'Set current system and move node to closed currentNode = lowestF() move(currentNode.id) For Each neighborNode In neighborNodes If Not onList(neighborNode.toSystem, 0) Then If Not onList(neighborNode.toSystem, 1) Then Dim newNode As New nodeData() newNode.id = neighborNode.toSystem newNode.parent = currentNode.id newNode.g = currentNode.g + neighborNode.distance newNode.h = findDistance(newNode.id, endSystem) newNode.f = newNode.g + newNode.h newNode.security = neighborNode.security openList.Add(newNode) shortOpenList(OLindex) = newNode.id OLindex += 1 Else Dim proposedG As Integer = currentNode.g + neighborNode.distance If proposedG < gValue(neighborNode.toSystem) Then changeParent(neighborNode.toSystem, currentNode.id, proposedG) End If End If End If Next 'Check to see if done If currentNode.id = endSystem Then Exit While End If End While If clarification is needed on my spaghetti code, I'll try to explain.

    Read the article

  • Using Appendbuffers in unity for terrain generation

    - by Wardy
    Like many others I figured I would try and make the most of the monster processing power of the GPU but I'm having trouble getting the basics in place. CPU code: using UnityEngine; using System.Collections; public class Test : MonoBehaviour { public ComputeShader Generator; public MeshTopology Topology; void OnEnable() { var computedMeshPoints = ComputeMesh(); CreateMeshFrom(computedMeshPoints); } private Vector3[] ComputeMesh() { var size = (32*32) * 4; // 4 points added for each x,z pos var buffer = new ComputeBuffer(size, 12, ComputeBufferType.Append); Generator.SetBuffer(0, "vertexBuffer", buffer); Generator.Dispatch(0, 1, 1, 1); var results = new Vector3[size]; buffer.GetData(results); buffer.Dispose(); return results; } private void CreateMeshFrom(Vector3[] generatedPoints) { var filter = GetComponent<MeshFilter>(); var renderer = GetComponent<MeshRenderer>(); if (generatedPoints.Length > 0) { var mesh = new Mesh { vertices = generatedPoints }; var colors = new Color[generatedPoints.Length]; var indices = new int[generatedPoints.Length]; //TODO: build this different based on topology of the mesh being generated for (int i = 0; i < indices.Length; i++) { indices[i] = i; colors[i] = Color.blue; } mesh.SetIndices(indices, Topology, 0); mesh.colors = colors; mesh.RecalculateNormals(); mesh.Optimize(); mesh.RecalculateBounds(); filter.sharedMesh = mesh; } else { filter.sharedMesh = null; } } } GPU code: #pragma kernel Generate AppendStructuredBuffer<float3> vertexBuffer : register(u0); void genVertsAt(uint2 xzPos) { //TODO: put some height generation code here. // could even run marching cubes / dual contouring code. float3 corner1 = float3( xzPos[0], 0, xzPos[1] ); float3 corner2 = float3( xzPos[0] + 1, 0, xzPos[1] ); float3 corner3 = float3( xzPos[0], 0, xzPos[1] + 1); float3 corner4 = float3( xzPos[0] + 1, 0, xzPos[1] + 1 ); vertexBuffer.Append(corner1); vertexBuffer.Append(corner2); vertexBuffer.Append(corner3); vertexBuffer.Append(corner4); } [numthreads(32, 1, 32)] void Generate (uint3 threadId : SV_GroupThreadID, uint3 groupId : SV_GroupID) { uint2 currentXZ = unint2( groupId.x * 32 + threadId.x, groupId.z * 32 + threadId.z); genVertsAt(currentXZ); } Can anyone explain why when I call "buffer.GetData(results);" on the CPU after the compute dispatch call my buffer is full of Vector3(0,0,0), I'm not expecting any y values yet but I would expect a bunch of thread indexes in the x,z values for the Vector3 array. I'm not getting any errors in any of this code which suggests it's correct syntax-wise but maybe the issue is a logical bug. Also: Yes, I know I'm generating 4,000 Vector3's and then basically round tripping them. However, the purpose of this code is purely to learn how round tripping works between CPU and GPU in Unity.

    Read the article

  • Investigating on xVelocity (VertiPaq) column size

    - by Marco Russo (SQLBI)
      In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

    Read the article

  • Libgdx 2D Game, Random generated World of random size, how to get mouse coordinates?

    - by Solom
    I'm a noob and English is not my mothertongue, so please bear with me! I'm generating a map for a Sidescroller out of a 2D-array. That is, the array holds different values and I create blocks based on that value. Now, my problem is to match mouse coordinates on screen with the actual block the mouse is pointing at. public class GameScreen implements Screen { private static final int WIDTH = 100; private static final int HEIGHT = 70; private OrthographicCamera camera; private Rectangle glViewport; private Spritebatch spriteBatch; private Map map; private Block block; ... @Override public void show() { camera = new OrthographicCamera(WIDTH, HEIGHT); camera.position.set(WIDTH/2, HEIGHT/2, 0); glViewport = new Rectangle(0, 0, WIDTH, HEIGHT); map = new Map(16384, 256); map.printTileMap(); // Debugging only spriteBatch = new SpriteBatch(); } @Override public void render(float delta) { // Clear previous frame Gdx.gl.glClearColor(1, 1, 1, 1 ); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); GL30 gl = Gdx.graphics.getGL30(); // gl.glViewport((int) glViewport.x, (int) glViewport.y, (int) glViewport.width, (int) glViewport.height); spriteBatch.setProjectionMatrix(camera.combined); camera.update(); spriteBatch.begin(); // Draw Map this.drawMap(); // spriteBatch.flush(); spriteBatch.end(); } private void drawMap() { for(int a = 0; a < map.getHeight(); a++) { // Bounds check (y) if(camera.position.y + camera.viewportHeight < a)// || camera.position.y - camera.viewportHeight > a) break; for(int b = 0; b < map.getWidth(); b++) { // Bounds check (x) if(camera.position.x + camera.viewportWidth < b)// || camera.position.x > b) break; // Dynamic rendering via BlockManager int id = map.getTileMap()[a][b]; Block block = BlockManager.map.get(id); if(block != null) // Check if Air { block.setPosition(b, a); spriteBatch.draw(block.getTexture(), b, a, 1 ,1); } } } } As you can see, I don't use the viewport anywhere. Not sure if I need it somewhere down the road. So, the map is 16384 blocks wide. One block is 16 pixels in size. One of my naive approaches was this: if(Gdx.input.isButtonPressed(Input.Buttons.LEFT)) { Vector3 mousePos = new Vector3(); mousePos.set(Gdx.input.getX(), Gdx.input.getY(), 0); camera.unproject(mousePos); System.out.println(Math.round(mousePos.x)); // *16); // Debugging // TODO: round // map.getTileMap()[mousePos.x][mousePos.y] = 2; // Draw at mouse position } I confused myself somewhere down the road I fear. What I want to do is, update the "block" (or rather the information in the Map/2D-Array) so that in the next render() there is another block. Basically drawing on the spriteBatch g So if anyone could point me in the right direction this would be highly appreciated. Thanks!

    Read the article

  • Investigating on xVelocity (VertiPaq) column size

    - by Marco Russo (SQLBI)
      In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

    Read the article

  • Is there any kind of established architecture for browser based games?

    - by black_puppydog
    I am beginning the development of a broser based game in which players take certain actions at any point in time. Big parts of gameplay will be happening in real life and just have to be entered into the system. I believe a good kind of comparison might be a platform for managing fantasy football, although I have virtually no experience playing that, so please correct me if I am mistaken here. The point is that some events happen in the program (i.e. on the server, out of reach for the players) like pulling new results from some datasource, starting of a new round by a game master and such. Other events happen in real life (two players closing a deal on the transfer of some team member or whatnot - again: have never played fantasy football) and have to be entered into the system. The first part is pretty easy since the game masters will be "staff" and thus can be trusted to a certain degree to not mess with the system. But the second part bothers me quite a lot, especially since the actions may involve multiple steps and interactions with different players, like registering a deal with the system that then has to be approved by the other party or denied and passed on to a game master to decide. I would of course like to separate the game logic as far as possible from the presentation and basic form validation but am unsure how to do this in a clean fashion. Of course I could (and will) put some effort into making my own architectural decisions and prototype different ideas. But I am bound to make some stupid mistakes at some point, so I would like to avoid some of that by getting a little "book smart" beforehand. So the question is: Is there any kind of architectural works that I can read up on? Papers, blogs, maybe design documents or even source code? Writing this down this seems more like a business application with business rules, workflows and such... Any good entry points for that? EDIT: After reading the first answers I am under the impression of having made a mistake when including the "MMO" part into the title. The game will not be all fancy (i.e. 3D or such) on the client side and the logic will completely exist on the server. That is, apart from basic form validation for the user which will also be mirrored on the server side. So the target toolset will be HTML5, JavaScript, probably JQuery(UI). My question is more related to the software architecture/design of a system that enforces certain rules. Separation of ruleset and presentation One problem I am having is that I want to separate the game rules from the presentation. The first step would be to make an own module for the game "engine" that only exposes an interface that allows all actions to be taken in a clean way. If an action fails with regard to some pre/post condition, the engine throws an exception which is then presented to the user like "you cannot sell something you do not own" or "after that you would end up in a situation which is not a valid game state." The problem here is that I would like to be able to not even present invalid action in the first place or grey out the corresponding UI elements. Changing and tweaking the ruleset Another big thing is the ruleset. It will probably evolve over time and most definitely must be tweaked. What's more, it should be possible (to a certain extent) to build a ruleset that fits a specific game round, i.e. choosing different kinds of behaviours in different aspects of the game. This would do something like "we play it with extension A today but we throw out extension B." For me, this screams "Architectural/Design pattern" but I have no idea on who might have published on something like this, not even what to google for.

    Read the article

  • Adding visible "Markers" to represent Geopoints to a MapView using ItemizedOverlay in Android

    - by LordSnoutimus
    Hello, I am building an application which stores GPS locations in a SQLite database and then outputs the data onto a MapView using an Overlay by drawing a red line between the points. I want to be able to show graphical markers (images) for each of these points as well as the red line. My code is as follows: public class MyOverlay extends ItemizedOverlay { // private Projection projection; private Paint linePaint; private Vector points; public MyOverlay(Drawable defaultMarker) { super(defaultMarker); points = new Vector<GeoPoint>(); //set colour, stroke width etc. linePaint = new Paint(); linePaint.setARGB(255, 255, 0, 0); linePaint.setStrokeWidth(3); linePaint.setDither(true); linePaint.setStyle(Style.FILL); linePaint.setAntiAlias(true); linePaint.setStrokeJoin(Paint.Join.ROUND); linePaint.setStrokeCap(Paint.Cap.ROUND); } public void addPoint(GeoPoint point) { populate(); points.addElement(point); } //public void setProjection(Projection projection) { // this.projection = projection; // } public void draw(Canvas canvas, MapView view, boolean shadow) { populate(); int size = points.size(); Point lastPoint = new Point(); if(size == 0) return; view.getProjection().toPixels(points.get(0), lastPoint); Point point = new Point(); for(int i = 1; i<size; i++){ view.getProjection().toPixels(points.get(i), point); canvas.drawLine(lastPoint.x, lastPoint.y, point.x, point.y, linePaint); lastPoint = point; } } @Override protected OverlayItem createItem(int arg0) { // TODO Auto-generated method stub return null; } @Override public int size() { // TODO Auto-generated method stub return 0; } } What would be the easiest way to implement adding markers for each GeoPoint? Thanks

    Read the article

  • FullCalendar and events: function

    - by Ernest
    I am trying to display my events from a MySQL database. I'm using the events function. My XML file being returned is pretty basic. I've looked at all of the FullCalendar questions and most of them talk about JSON and point to the documentation for JSON. I can't use JSON. I have to go XML. Can you tell me where I'm off. Here is a sample of what my xml looks like: Grow Your Business on the Web 2010-06-05T9:30 2010-06-05T12:30 O The whole file is prefaced with a tag and closed with a tag. My jquery is as follows: $(document).ready(function() { $('#calendar').fullCalendar({ height: 550, theme: true, header: { left: 'prev,next today', center: 'title', right: 'month,agendaWeek,agendaDay' }, editable: true, events: function(start, end, callback) { $.ajax({ url: 'ncludeFiles/sbdp-cal-xml.php', dataType: 'xml', data: { // our hypothetical feed requires UNIX timestamps start: Math.round(start.getTime() / 1000), end: Math.round(end.getTime() / 1000) }, success: function(doc) { var events = []; $(doc).find('event').each(function() { events.push({ title: $(this).attr('title'), start: $(this).attr('start'), end: $(this).attr('end'), className: $(this).attr('className'), url: $(this).attr('url') }); }); callback(events); } }); } }); }); I'd appreciate any help you could give me. Thanks!

    Read the article

  • Overlay only draws line between first 2 GPS points in Android

    - by LordSnoutimus
    Hi, I am experiencing an unusual error using ItemizedOverlay in Android. I am creating a GPS tracking device that plots a route between waypoints stored in a database. When I provide the first two sets of longitude and latitude points through the emulator in Eclipse, it draws a red line just how I want it, but if I send another GPS point, it animates to the point, but does not draw a line from the last point. public class MyOverlay extends ItemizedOverlay { // private Projection projection; private Paint linePaint; private Vector points; public MyOverlay(Drawable defaultMarker) { super(defaultMarker); points = new Vector<GeoPoint>(); //set colour, stroke width etc. linePaint = new Paint(); linePaint.setARGB(255, 255, 0, 0); linePaint.setStrokeWidth(3); linePaint.setDither(true); linePaint.setStyle(Style.FILL); linePaint.setAntiAlias(true); linePaint.setStrokeJoin(Paint.Join.ROUND); linePaint.setStrokeCap(Paint.Cap.ROUND); } public void addPoint(GeoPoint point) { points.addElement(point); } public void draw(Canvas canvas, MapView view, boolean shadow) { int size = points.size(); Point lastPoint = new Point(); if(size == 0) return; view.getProjection().toPixels(points.get(0), lastPoint); Point point = new Point(); for(int i = 1; i<size; i++){ view.getProjection().toPixels(points.get(i), point); canvas.drawLine(lastPoint.x, lastPoint.y, point.x, point.y, linePaint); lastPoint = point; } } @Override protected OverlayItem createItem(int arg0) { // TODO Auto-generated method stub return null; } @Override public int size() { // TODO Auto-generated method stub return 0; } }

    Read the article

  • Web crawler update strategy

    - by superb
    I want to crawl useful resource (like background picture .. ) from certain websites. It is not a hard job, especially with the help of some wonderful projects like scrapy. The problem here is I not only just want crawl this site ONE TIME. I also want to keep my crawl long running and crawl the updated resource. So I want to know is there any good strategy for a web crawler to get updated pages? Here's a coarse algorithm I've thought of. I divided the crawl process into rounds. Each round URL repository will give crawler a certain number (like , 10000) of URLs to crawl. And then next round. The detailed steps are: crawler add start URLs to URL repository crawler ask URL repository for at most N URL to crawl crawler fetch the URLs, and update certain information in URL repository, like the page content, the fetch time and whether the content has been changed. just go back to step 2 To further specify that, I still need to solve following question: How to decide the "refresh-ness" of a web page, which indicates the probability that this web page has been updated ? Since that is an open question, hopefully it will brought some fruitful discussion here.

    Read the article

  • How to add Custom View +Relative Layout into ViewGroup

    - by TimothyMiller
    Hi I am creating a View where you can draw on the screen, using a view, where I would like to have a button/titlebar drawn at the top of the screen. Here is my current code public class FingerPaint extends Activity implements ColorPickerDialog.OnColorChangedListener { private Paint mPaint; private MyView mView; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); LinearLayout main = new LinearLayout(this); mView = new MyView(this); main.addView(this.getLayoutInflater().inflate( R.layout.topbar, null )); main.addView(mView); main.bringChildToFront(mView); setContentView(main); // mView.addView(this.getLayoutInflater().inflate( R.layout.topbar, null )); mPaint = new Paint(); mPaint.setAntiAlias(true); mPaint.setDither(true); mPaint.setColor(0xFFFF0000); mPaint.setStyle(Paint.Style.STROKE); mPaint.setStrokeJoin(Paint.Join.ROUND); mPaint.setStrokeCap(Paint.Cap.ROUND); mPaint.setStrokeWidth(12); mBitmaps=new Bitmap[100]; location=0; actualSize=0; mEmboss = new EmbossMaskFilter(new float[] { 1, 1, 1 }, 0.4f, 6, 3.5f); mBlur = new BlurMaskFilter(8, BlurMaskFilter.Blur.NORMAL); setContentView(main); } public class MyView extends View{ ......... } But when run, only the topbar.xml view is shown. I want the status bar from topbar and the rest down to be from the myView (for drawing on the screen like paint). Am I using ViewGroup properly?

    Read the article

  • Spikes in Socket Performance

    - by Harun Prasad
    We are facing random spikes in high throughput transaction processing system using sockets for IPC. Below is the setup used for the run: The client opens and closes new connection for every transaction, and there are 4 exchanges between the server and the client. We have disabled the TIME_WAIT, by setting the socket linger (SO_LINGER) option via getsockopt as we thought that the spikes were caused due to the sockets waiting in TIME_WAIT. There is no processing done for the transaction. Only messages are passed. OS used Centos 5.4 The average round trip time is around 3 milli seconds, but some times the round trip time ranges from 100 milli seconds to couple of seconds. Steps used for Execution and Measurement and output Starting the server $ python sockServerLinger.py /dev/null & Starting the client to post 1 million transactions to the server. And logs the time for a transaction in the client.log file. $ python sockClient.py 1000000 client.log Once the execution finishes the following command will show the execution time greater than 100 milliseconds in the format <line_number>:<execution_time>. $ grep -n "0.[1-9]" client.log | less Below is the example code for Server and Client. Server # File: sockServerLinger.py import socket, traceback,time import struct host = '' port = 9999 l_onoff = 1 l_linger = 0 lingeropt = struct.pack('ii', l_onoff, l_linger) s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) s.setsockopt(socket.SOL_SOCKET, socket.SO_LINGER, lingeropt) s.bind((host, port)) s.listen(1) while 1: try: clientsock, clientaddr = s.accept() print "Got connection from", clientsock.getpeername() data = clientsock.recv(1024*1024*10) #print "asdasd",data numsent=clientsock.send(data) data1 = clientsock.recv(1024*1024*10) numsent=clientsock.send(data) ret = 1 while(ret>0): data1 = clientsock.recv(1024*1024*10) ret = len(data) clientsock.close() except KeyboardInterrupt: raise except: print traceback.print_exc() continue Client # File: sockClient.py import socket, traceback,sys import time i = 0 while 1: try: st = time.time() s = socket.socket(socket.AF_INET,socket.SOCK_STREAM) while (s.connect_ex(('127.0.0.1',9999)) != 0): continue numsent=s.send("asd"*1000) response = s.recv(6000) numsent=s.send("asd"*1000) response = s.recv(6000) i+=1 if i == int(sys.argv[1]): break except KeyboardInterrupt: raise except: print "in exec:::::::::::::",traceback.print_exc() continue print time.time() -st

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >