Search Results

Search found 21196 results on 848 pages for 'software raid'.

Page 25/848 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • win2008 R2 server core software RAID

    - by shimonyk
    I am trying to set up software raid on a win2008 R2 server core. I have the disks configured as dynamic. In the server manager gui, i can see the disks, but when i right click, the option to set up "new mirrored volume" is not listed. I tried it with the command line using diskpart, and it gives the error "Virtual Disk Service Error: The size of the extent is less than the minimum." The drive are a new pair of 1Tb disks. Is this not supported in server core, or am i missing something else? Thank you

    Read the article

  • Setting up Raid 1 Array for Home Server

    - by user1048116
    I'm not sure if this is even possible, but it's worth asking on here! Essentially I have a old machine at home (well, not old hardware wise, but I recently built a new gaming rig), which I decided to install a copy of W2008 R2 on and use as a file/backup server and media center'ish machine. As of now, it has a single drive partitioned into C and D, with D being the Data partition. I have happened to find an old 1TB SATA drive lying around at home, and was wondering if it's possible to setup a Raid 1 array in my rig within Windows without needing to lose everything on my first drive (or maybe even just mirror a specific partition, say the Data partition, as this is just what stores my photos etc). Maybe this isn't possible, but you never know :) Regards, T.C

    Read the article

  • How do I completly remove software? [closed]

    - by Dustin
    Possible Duplicate: Why are the hidden settings-folders not deleted when purging an application? Ok I have 8GB on my desktop dual booting win 7. I installed a few games, assualtcube, tremolous, and spring. But I had removed them using 'remove --purge' and only to find they are still lingering and purge does not well truly purge them. I need them completely gone and not secretly hogging space when I purged them. How can i completely remove software, like it is gone and not going to take any more of my precious space? Shrinking 7 and growing Ubuntu is not an answer I am accepting, i want to know how to completely remove software. Thank you for your time and your answers.

    Read the article

  • Ubuntu Software Center (10.04LTS) Missing Packages

    - by Chris
    I recently downgraded from 11.10 to 10.04LTS for compatibility and support of specific development tools. The Ubuntu Software center is missing many packages that I had access to in 11.10, most notably LibreOffice. (Also development tools.) Is there a way to update software sources to find the missing packages? (Or are they incompatible with 10.04?) Synaptic does not have libre either. I feel like I am working with a gimped version of USC.

    Read the article

  • Alerting when a RAID Array disk fails locally on VMWare ESX or ESXi System

    - by Tim K
    With ESX and ESXi, we recently had two systems where that the boot partition became degraded due to a failed disk. The only alert we managed to capture was the visual alert on the Dell servers. We failed to received any electronic alerts regarding the failed or degraded array. Does anyone have any experience with monitoring for these types of failures? In both cases, the servers were running in a RAID 5 SCSI configuration (5 disks on one system, 3 disks on another) which if we were running a Windows Server OS, we would have had an alert created in the Eventviewer. Where would I begin to look for this solution. Can it be configured in VCenter or vFoglight?

    Read the article

  • Using cracked software and tools [closed]

    - by Lena Aslo
    I am seeing people complaining about expensive tools such as Dreamweaver or Photoshop. I am just wondering about that, because everyone knows that they can get this software running for free (if it is done illegally). Why don't they just use a cracked version? Is it so likely to get caught? I feel that nowadays a lot of people are using cracked software but whenever the topic is mentioned, they ALL say PSSST!!! or start criticizing it, even though they are doing it themselves...

    Read the article

  • Expanding RAID 1 array size (Adaptec 1420SA controller)

    - by cincura.net
    I have an Adaptec 1420SA controller in server and RAID 1 array created. The old disks slowly started to report S.M.A.R.T errors so I replaced first one, rebuild array and then other one and rebuild the array again. But the new drives are bigger, so I'd like to expand the array to use full disk capacity. Is it somehow possible? In the Adaptec configuration utility, after POST, I didn't found anything that could do it. I still have the old drives, if it helps. The array is used for system (Windows 2008 R2 SP1) booting. Thanks.

    Read the article

  • Transfer Raid Drives to External Enclosure

    - by dubbeat
    I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

    Read the article

  • FreeNAS/ZFS/Raid-Z slightly different disks

    - by muskratt
    I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

    Read the article

  • Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

    Read the article

  • Is it normal for a SAS drive to have a few bad blocks, or should I replace my drive ASAP?

    - by Nate
    I have a drive—part of a RAID 1 mirror—that has two bad blocks. Adaptec Storage Manger e-mailed me when it detected the blocks. It shows 4 medium errors for that drive, but state is still “optimal”. This is my first time using Adaptec RAID controllers. I don’t know if an occasional bad block is normal, or if I should immediately replace that drive. Update: The drive failed later the same day! The disk subsystem is: Adaptec 6405 with ZMM (2) Seagate near-line SAS drives (ST31000424SS) The other drive hasn’t reported any bad blocks yet. I am running a consistency check.

    Read the article

  • RAID 1 Mirror Error with Two Western Digital 500GB Drives

    - by bm678
    I have Windows 7 Ultimate 64 bit installed on a Western Digital 500GB drive (WD5000BEVT-22ZAT0) that was partitioned automatically by Windows as 100MB System Reserved and 465.66GB drive C. There is also an unallocated second Western Digital 500GB drive (WD5000BPVT-22HXZT1) that I want to use for RAID 1 to mirror the first drive but I get an error message stating “ALL DISKS HOLDING EXTENTS FOR A GIVEN VOLUME MUST HAVE THE SAME SECTOR SIZE, AND THE SECTOR SIZE MUST BE VALID.” I uninstalled Windows patch KB-982018 but I still get the same error message. Could you please let me know how to resolve this? Thanks.

    Read the article

  • Raid system fails to boot after moving from 2.6 kernel to 3.5

    - by user846226
    I'm running Gentoo Linux with a custom compiled kernel and I've just migrated from a 2.6 kernel to a 3.5. As my HD's are on RAID 0 mode I use a custom initrd file in order to be able to boot. While kernel 2.6 is able to boot without problems the new 3.5 compiled kernel fails to boot complaining about no block devices found. After taking a look at initrd.cpio contained scripts I can see the failure message is given by mdadm tool. Does anyone has a clue about that? Edit: this morning i noticed there was some kind of issue on my old initrd which works fine for 2.6 kernels, so created a new initrd which works fine and let me to boot into GNU/Gentoo Linux with same 3.5 bzImage. It could be an issue of mdadm, gonna check it. https://bugs.gentoo.org/show_bug.cgi?id=416081

    Read the article

  • Installing raid controller forces reinstall of Windows Server 2008

    - by Tyler
    So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

    Read the article

  • Access RAID configuration in x3550M2

    - by Mike B
    I'm trying to configure RAID in a IBM x3550 M2 server. I can't find any messages on boot about any hotkey to access the configuration utility. I wasn't able either in BIOS. The card is a on board LSI 1068e. I can't find the original CD's shipped with the server, but I downloaded Server Guide 9.21 from IBM web. Booted with that, and only getting stuck at "Windows loading"p. Tried with a 8.? version from a x3550 (M1), but it was less useful. Although I do not consider myself an expert, I'm starting to feel like a newbie luser. Any help?

    Read the article

  • Software patents [closed]

    - by user71622
    not exactly sure where I should post this but I have a question about filing for software patents. If I have an idea for a UI feature, how do I go about patenting that feature. I don't have any code written and I'm afraid my coding skills aren't up to snuff in order to code the thing I imagined but aside from that, can anyone give me any general guidance and info? I've gone through the CIPO site (Canada's patent office) but haven't come away with enough information on what I'm trying to patent but what I have understood is that I have to very thorough in describing what I'm trying to patent and showing that it could work. If anyone has gone through the process of patenting software, can you tell me about your experience? I would like to hear about US and Canadian experiences Thank you!

    Read the article

  • Optical Character Recognition software recommendations?

    - by Tim
    I have seen some ebooks/papers that were apparently scanned from their paper versions but the text in the ebooks/papers can amazingly be copied out. I suppose the directly-scanned versions must have been processed by some Optical Character Recognition software. So I would like to know what are the recommended Optical Character Recognition softwares? Especially those that are either for Ubuntu or free? If those for Windows are far more superior, please let me know as well. I am particularly interested in those OCRs that can accept a scanned pdf file as input and still produce as output another pdf file that looks the same as the input one but with its text copyable. Thanks and regards! Please limit one software per answer

    Read the article

  • Windows XP 32-bit + RocketRaid 622 + 4 x 3TB = not quite a RAID setup

    - by gmoney
    I'm looking to make a 6TB RAID 10 array from my new pile of drives under Windows XP 32-bit, however they are only for auxiliary storage. After adding all the drives to an array, and initializing them XP sees only a fraction of the storage, 2TB. I'm assuming this has to do with MBR vs GPT. Is making a series of 2TB volumes and then spanning my only solution? Most questions online have to do with booting from this setup, but I'm just using them as extra storage. Hardware: 4 x 3TB Hitachi Deskstars + RocketRaid 622 + Sans Digital TR8M TowerRAID. The array is connected via eSATA.

    Read the article

  • What are the recognized ways to increase the size of the RAID array online/offline?

    - by user149509
    Is it possible, in theory, increase the size of the RAID-array of any level just by adding new drive(s)? Variant like "backup whole data - delete old array - add/replace disks - create new array - restore data" is obvious so what are the other options? Does it depend on the RAID-level only or on the implementation of RAID-controller only, or on both? Adding new disks to a striped array necessarily leads to a rebuilding of the array with the redistribution of the strips to the new drives? What steps should be done to increase size of RAID-array in online/offline scenarios? Especially interesting RAID-5 and RAID-10. I would like to see the big picture.

    Read the article

  • NVidia raid 5 array spooling sounds and delay

    - by Chase B. Gale
    I've had a raid 5 array setup with 3 2TB WD Green drives for about 3 years now. Starting last week, when I would access the array for the first time, I hear a loud drive spooling sound and experience a ~5 second delay before being able to access\save files. This behavior happens when I don't use the array for some time (about an hour) and after occurring it doesn't happen again if I continue to access the array. I've run SMART scans on all drives and they come back as being a-ok. What's causing this? Is my array getting close to death?

    Read the article

  • Software Center crashes and terminal errors

    - by user97521
    *note*I'm a new user to Ask Ubuntu and I've only recently switched to Ubuntu 12.04. When I try to open the software center (Ubuntu 12.04 32-bit) it will flash open, load for maybe 1-2 seconds, and then close. When i try using: sudo apt-get purge software center sudo apt-get install sudo apt-get update sudo apt-get upgrade I get this within the terminal: Reading package lists... Error! E: Problem parsing dependency Depends E: Error occurred while processing printer-driver-hpcups (NewVersion2) E: Problem with MergeList /var/lib/dpkg/status E: The package lists or status file could not be parsed or opened. *The problem fixed itself after I shut down my laptop for the night and turned it back on to check my e-mail this afternoon. If anyone could tell me how to fix this problem in the future please do, I would like to learn about these kind of things because i don't plan on putting windows on my laptop again :P *

    Read the article

  • Windows shows incorrect free space on Raid 10 volume

    - by Adenverd
    I have 4 1TB hard drives in RAID 1+0 configuration. Theoretically, I should have ~2TB of available space. Windows says the drive has a total size of 1.81 TB, which I'm fine with. As far as files on the volume go, I used WinDirStat to determine that I have 552.8GB of files on the volume. This means that I should have somewhere around 1.3TB minimum of free space. Yet Windows shows the drive as only having 492GB of free space. Are there hidden files somewhere that I can't see (I have show hidden files/folders turned on)? Does Windows not recognize that old files have been deleted? Is there any way to correct this problem?

    Read the article

  • Documenting software architectures that serve multiple markets

    - by wsb3383
    Hello, I'm the lead developer/architect wanna-be on a J2EE based system/platform at work that serves both real estate and automotive markets. The systems consists of a set of database back ends, web services and two web clients. The platform ends up serving 3 different products: an internal vehicle inventory system for use by company analysts, an external dealer management system (commercialized product), and a real estate inventory system (commercialized). In other words, it follows a software product lines approach....My question is, I'm having trouble communicating to other technical and some business people how this platform architecture is one system that serves multiple markets (by leveraging some existing assets combined with minor modifications)....Is there a formal modeling language that can simplify communicating this intent? I should note that I haven't read much about software product lines, so I'm not sure if there is actually a standard modeling approach to SPL that i'm not aware of....I'm also interested in knowing if there are special configuration management practices for such systems. thanks,

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >