Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 250/1834 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• How to configure 2nd network card for use in VMWare Workstation?

  - by Timo

  Hi all, I am using VMWare Workstation 6.5, connected to my network with a bridged adapter so that the virtual machine OS (Windows XP) has its own IP adress. This just worked out of the box. Now my host machine (Windows Vista) has an additional network card that is directly connected to another computer using a crossover cable (and fixed IP adress 10.1.1.4, while the "main" network connection is using DHCP with IP in the 192.68.0.* range). How can I use that network connection as well in the virtual machine? Do I need to bridge my 2nd network adapter to some VMnetX adapter? Do I need to add a host virtual adapter? I do not know much about networks, and the VMWare network settings really confuse me :-) Thanks, Timo

  Read the article

• How to fill in the network line in the ubuntu interfaces config file?

  - by matnagel

  I have to configure an ubuntu hardy server network interface. The service hoster told me that this is the network data for the machine: IP Range: 111.111.200.74 to 111.111.200.78 Netmask: 255.255.255.248 Broadcast: 111.111.200.79 Gateway: 111.111.200.73 Subnet: 111.111.200.72/29 I am only using the first IP address. I will update the /etc/hosts file with 111.111.200.74, but I am still unsure how the /etc/network/interfaces file should be. This is my plan: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 111.111.200.74 netmask 255.255.255.248 network 111.111.200.??? broadcast 111.111.200.79 gateway 111.111.200.73 As you can see I don't know how to build the network line. How would I calculate the data for the network line and what is the result? (I changed the first 2 octets of the subnet, they are not "111.111" in the real setup.)

  Read the article

• Can connect to Samba, but access denied to homes

  - by user893730

  I can connect to the samba server using both IP address and server name, and I can see the home folder name, but can't connect to it smb.cnf [global] workgroup = WORKGROUP server string = Venus wins support = no read only = no browsable = yes create mode = 0777 directory mode = 0777 case sensitive = no dns proxy = no interfaces = 127.0.0.1/8 eth0 bind interfaces only = yes log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 security = user encrypt passwords = true passdb backend = smbpasswd obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = no [homes] comment = User Directories path = /data/localdevs/%u public = no browsable = yes writable = yes the /etc/samba folder has the following files in it lmhosts smb.conf smb.conf.orig smbusers The output of "sudo pdbedit -L" is user1:500: ls -abl /data/localdevs/ drwxr-xr-x. 4 user1 user1 4096 Jul 24 17:35 user1 These are what samba logs are showing when I get the access denied to user1's home directory [2012/07/24 20:27:08.599216, 3] smbd/process.c:1489(process_smb) Transaction 24 of length 90 (0 toread) [2012/07/24 20:27:08.599350, 3] smbd/process.c:1298(switch_message) switch message SMBntcreateX (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.599373, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.599412, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.599485, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.599508, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.599552, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.599581, 3] smbd/dosmode.c:166(unix_mode) unix_mode(.) returning 0766 [2012/07/24 20:27:08.599643, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.599668, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.599707, 4] smbd/open.c:1990(open_file_ntcreate) calling open_file with flags=0x0 flags2=0x0 mode=0766, access_mask = 0x81, open_access_mask = 0x81 [2012/07/24 20:27:08.599806, 3] smbd/open.c:467(open_file) Error opening file . (NT_STATUS_ACCESS_DENIED) (local_flags=0) (flags=0) [2012/07/24 20:27:08.599838, 3] smbd/error.c:80(error_packet_set) error packet at smbd/error.c(160) cmd=162 (SMBntcreateX) NT_STATUS_ACCESS_DENIED [2012/07/24 20:27:08.604075, 3] smbd/process.c:1489(process_smb) Transaction 25 of length 90 (0 toread) [2012/07/24 20:27:08.604193, 3] smbd/process.c:1298(switch_message) switch message SMBntcreateX (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.604216, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.604268, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.604336, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.604395, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.604419, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.604442, 3] smbd/dosmode.c:166(unix_mode) unix_mode(.) returning 0766 [2012/07/24 20:27:08.604532, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.604554, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.604583, 4] smbd/open.c:1990(open_file_ntcreate) calling open_file with flags=0x0 flags2=0x0 mode=0766, access_mask = 0x81, open_access_mask = 0x81 [2012/07/24 20:27:08.604679, 3] smbd/open.c:467(open_file) Error opening file . (NT_STATUS_ACCESS_DENIED) (local_flags=0) (flags=0) [2012/07/24 20:27:08.604705, 3] smbd/error.c:80(error_packet_set) error packet at smbd/error.c(160) cmd=162 (SMBntcreateX) NT_STATUS_ACCESS_DENIED [2012/07/24 20:27:08.606977, 3] smbd/process.c:1489(process_smb) Transaction 26 of length 80 (0 toread) [2012/07/24 20:27:08.607096, 3] smbd/process.c:1298(switch_message) switch message SMBtrans2 (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.607119, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.607139, 3] smbd/trans2.c:5100(call_trans2qfilepathinfo) call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004 [2012/07/24 20:27:08.607162, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.607184, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.607208, 3] smbd/trans2.c:5226(call_trans2qfilepathinfo) call_trans2qfilepathinfo . (fnum = -1) level=1004 call=5 total_data=0 [2012/07/24 20:27:08.608306, 3] smbd/process.c:1489(process_smb) Transaction 27 of length 80 (0 toread) [2012/07/24 20:27:08.608362, 3] smbd/process.c:1298(switch_message) switch message SMBtrans2 (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.608383, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.608403, 3] smbd/trans2.c:5100(call_trans2qfilepathinfo) call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1005 [2012/07/24 20:27:08.608439, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.608461, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.608484, 3] smbd/trans2.c:5226(call_trans2qfilepathinfo) call_trans2qfilepathinfo . (fnum = -1) level=1005 call=5 total_data=0

  Read the article

• How to set up a easy-to-use proxy for the whole system with WinXP client and server?

  - by Pekka

  I am working together intensively with a colleague on the Canary Islands. We speak through live messenger and work together using a RDP software. She has frequent problems with connections to certain big-name and small-name sites (amongst others live.com, google.com, gmx.de) very likely to be caused by the spanish provider (the connections simply time out, this has been going on for weeks already). I have been thinking about setting up my computer as a proxy to make these connections work. I have a DSL connection and am behind a NAT capable router that I control. Does anybody know a simple, "one-click" way to transport ALL network traffic through a remote proxy? Without having to set proxy settings for each application that uses the internet? VPN is not an option, because I am behind a firewall that supports protocol 47 and such, but I have never succeeded in getting an incoming VPN connection to work. I can however redirect normal traffic using NAT. A VPN solution that does not need strange protocols would also be an option.

  Read the article

• Hyper-V management remotely

  - by Péter

  I'll tell you in advance that I'm newbie in the topic. I have a Win8 (Home) machine with Hyper-V installed behind a router. The router has a public IP and a domain attached. I have another Win8 (Work) machine also installed Hyper-V. I want to access to my home Hyper-V via Hyper-V Manager so I can manage my virtual machines from work. I found this article but I don't know if it's applicable to me. I thought that a simple port forwarding should work and I only need to do is grant the Work HV manager my domain and the port I choose and if it's pop a login form I only need to fill the user data of my Home computer? How can I solve this? My thoughts revolve around: - Port forwarding - set domain+port and set my home user - Set up a VPN and use the local ip address of my home computer (it looks like a little cumbersome and my router only support PPTP) I'm open to any other solution too. Thanks, Péter

  Read the article

• Is it possible to add an existing Azure VM to an Azure Virtual Network?

  - by Dan Harris

  Didn't think this was directly related to programming, so thought Superuser would be better than Stack Overflow.... Is it possible to add an existing Azure VM to an Azure Virtual Network if you didn't add it to the virtual network at the time of creation? I can't see an option to change which Virtual Network the VM is connected to. Do you just have to do it at the time you create the VM, and if you don't do it then you will need to re-create the VM and delete the existing one? Example of the scenario: No VM's or Virtual Networks exist I create a VM (VM1), there is no virtual network so it isn't added to one Later I create a Virtual Network in Azure (Network1) It is possible to create another VM (VM2) and connect it to the Virtual Network (Network1), but can I connect VM1 to Network1 or must I delete VM1 and re-create it to get it connected to Network1?

  Read the article

• Is it possible to add hardware on a remote machine and use it as if it was installed on the local machine?

  - by that0th3rGuy

  Probably a silly question. We have two computers in the apartment running Windows 7 and Windows Vista. 99% of the time we use headphones but every now and then we have a desire for some ambiance so we got a set of 2.1 speakers. But now only one of us has access to the speakers unless we move them around every now and then. So I was wondering if it's possible to add the other computer's sound card as a hardware device on my computer so that I can configure, for instance, Winamp to play through the other computer's sound card, hence the speakers connected to the other computer.

  Read the article

• RDP Connection to Windows 7 stays really slow

  - by Pavlo

  I have an Issue with connecting to Windows 7 via RDP. I can open an RDP Session, but regardless of any settings, the responce times are really long. This in particulary is the case when opening a web page in a browser. I've tried IE, Firefox and Google Chrome. I also use RDP connection to a Windows 2008 Server from the same client machine, and the speed is very normal with all features turned on. We have Gigabit Ethernet here. So I think it can not be the client's fault. What concerns Windows 7 Machine, I've tried shutting all the sraphic features off and turning the color levels to 256 colors. Result - the same. If I work locally on the machine - I can not see any lags. What else have I tried: Using old RDP 5 Client from Microsoft Setting network autotuninglevel as seen here Do You have some ideas? Thanks in advance! Update the problem seems to be with rendering window contents. All the window borders and pannes are rendered pretty quickly, but the content shows up very slowly. Also mouse movements are recognised by the Win 7 box only after some period. Are there some hidden settings in the RDP, where one could turn some advanced features off or turn some caching on? I use Bitmap Caching, but this apparently doesn't help.

  Read the article

• Trouble in Team Viewer VPN Connection

  - by Sumit Pal

  I have completed initial vpn connection setup. It has connected. I have tested with ping and it is ok. My problem is, when I want to start file transfer in VPN it asks for username & password. So what is the user name? I have tried giving Computer-Name/User-Name. I have found my Computer Name by going to Control Panel/System/ & clicking 'Computer Name' tab & username from user accounts or it is shown when I login in windows account (Please correct me if the above procedure is wrong). But what is the password? I have tried giving the account password but it always give 'The username or password is incorrect.' My Question: How to find the username & password? For Information: a) I have Team Viewer 7 installed in one Windows XP PC & one Windows 8 PC. I like to create a secure connection between these two PCs. b) The two PCs are connected in the same local network via a router. Please ask if you need additional information.

  Read the article

• Remote Software Solution that Acts as a Client

  - by Richard

  I am looking for something that I am not sure exists. I have a remote computer that will not allow incoming traffic due to ISP blocking of ports(basically double NAT situation that I am unable to get around). I am wondering if I have a computer acting as a client, is there any solution out there that will allow remote access to the computer. I do have other servers on the net that have static IP's that the computer could initiate a connection with. I am thinking of using Debian Linux, However computer is not built yet so OS is not overly important at this point.

  Read the article

• Update Billing Email Addresses in Sage MAS90

  - by ThaKidd

  I have been tasked with trying to find a method of updating about 500 customer email addresses in MAS90. I recently discovered that they had the ability to email invoices to their customers and because I opened my big mouth, they now want me to find a way to add about 500 emails into the system so they do not have to perform the task manually. The office does have an SQL server which supports ASP sites which contains a list of all of the current email addresses. My plan was to use Microsoft Access 2007 with the MAS90 ODBC connector to attempt this update. My questions are: Is this the right way to go or is there a better method of obtaining these results? Does anyone happen to know which tables I should be looking at? Any and all help is appreciated. Thanks in advance!

  Read the article

• Verizon Fivespot firewall

  - by Patrick

  I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

  Read the article

• How to use psexec without admin privileges on target machine?

  - by HighCommander4

  Is it possible to use psexec to execute a command on a remote machine without having admin privileges on the remote machine? I tried running psexec \\<machine> -u <username> -p <password>, where <username> and <password> are non-admin credentials, but I get an "access denied" error I can remote desktop into the remote machine with the same credentials without any problems. My local machine is running Windows 7 Enterprise 64-bit, and the remote machine is running Windows Server 2008 64-bit. I do have admin privileges on the local machine. EDIT: To all the people who are downvoting this question: I am not trying to circumvent any sort of security measure. I can already run the process on the remote machine by remote desktop-ing into the remote machine and running it. I'm simply looking for a command-line way to do something I can already do through a GUI.

  Read the article

• Automating the input of query criteria

  - by Steve Wren

  New user to this site and found an extremely informative answer to a question I had but can't find an answer to this one. Using Access 2010, I have 42 different criteria that I need to run individually using the same query. Rather than have 42 queries, or an input parameter dialogue box where I need to enter the criteria 42 times, can I automate this so that the 42 criteria are sourced sequentially from a different table and input to the query using a macro/ module etc. Unfortunately I have no experience of SQL/VBA so am struggling. Any help would be greatly appreciated.

  Read the article

• Is it possible to impersonate another WAP by intercepting communication with other client?

  - by OSX NINJA

  There is a well known WAP that lots of people use. Someone comes in with a laptop equipped with a sniffer. The laptop sniffs people trying to log on to the WAP. It intercepts the connection, and when people try to log on to the WAP, they unknowingly log on through that person's laptop instead. All communication between the WAP and people's laptops go through that person's laptop. That person's laptop is able to block access to certain websites that the WAP would normally allow.

  Read the article

• Problem accessing the remote working space on my new SBS 2008 box

  - by Dabblernl

  This supposedly easy to install OS is starting to drive me nuts... SYMPTOMS: When trying to connect to the remote workplace I get (and ignore) the security warning because I am currently testing with the self issued certificate. After loggin in the remote workplace's main screen displays but the images on it do not load. When I try to click the email link I am thrown back to the login screen. If I try the login to exchange directly by typing in the remote.mydomain.com/owa address I get a 403 error that I am denied access. The problem occurs on both a vista and a win 7 machine. It seems that some security setting is playing tricks with me. How can I troubleshoot this?

  Read the article

• SQL update table from another table

  - by LtDan

  Using SQL in Access, trying to "Update" a table, with the user name, from another table. The 3rd line below (SQLnm2...) says error-2465 cant find field '|'. I've tried changing the expression many ways but no success. Any assistance would be greatly appreciated. Dim SQLnm As String Dim SQLnm2 As String SQLnm2 = SQLnm2 & "', '" & [Employees]![NBK] & "');" SQLnm = " Update tbl_DateTracking SET NBK = " SQLnm = SQLnm & "'" & SQLnm2 & "' WHERE " SQLnm = SQLnm & "CaseId = '" & CaseId & "' AND OCC_Scenario = '" & OCC_Scenario & "';" DoCmd.RunSQL SQLnm

  Read the article

• Two Network Adapters on Hyper-V Host - Best way to configure?

  - by GoNorthWest

  I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

  Read the article

• Moving to the next line to populate an excel file from VBA

  - by edmon

  I have the below code that takes certain fields from my MS Access (A small Hotel Reservation Database)form and populates defined cells in the said Excel file. Dim objXLApp As Object Dim objXLBook As Object Set objXLApp = CreateObject("Excel.Application") Set objXLBook = objXLApp.Workbooks.Open("Y:\123files\File\Hotel Reservation.xls") objXLApp.Application.Visible = True objXLBook.ActiveSheet.Range("B2") = Me.GuestFirstName & " " & GuestLastName objXLBook.ActiveSheet.Range("C2") = Me.PhoneNumber objXLBook.ActiveSheet.Range("E2") = Me.cboCheckInDate objXLBook.ActiveSheet.Range("F2") = Me.cboCheckOutDate objXLBook.ActiveSheet.Range("H2") = Me.RoomType objXLBook.ActiveSheet.Range("I2") = Me.RoomNumber End Sub How can I keep populating a new Guest to the same Excel file just on the next row?

  Read the article

• Prevent acccess to the C drive

  - by Jenko

  Is it possible to prevent regular users from accessing the C drive via Windows Explorer? they should be allowed to execute certain programs. This is to ensure that employees cannot steal or copy out proprietary software even though they should be able to execute it. One way would be to change the option in windows Group Policy and set the "shell" to something other than "explorer.exe". I'm looking for a similar windows setting that just hides the C drive or otherwise prevents trivial access. This is for Windows XP/7.

  Read the article

• Why can a network address not be a valid host address?

  - by Goblinlord

  So... I have studied for CCNA and such and been working with IP networking at the least the past 8 years or so. I have always seen and been told that the network address for a subnet is not a valid host address. Now first I will start by saying I know this is true. My question is more... is there a technical reason it can not be used or was it just arbitrarily agreed upon when the specification was designed? I understand why a broadcast address can not be used (because it is ACTUALLY used). The thing is when I see a network address used it is normally only in routing which is specifically using NETWORK addresses. This being the case, (network addresses being used only when you are expecting a network address) is there some technical reason that they could not have the network address be an actual valid host address?

  Read the article

• Remote connect to mysql server?

  - by LF4

  I've been trying to figure out why I keep getting this error when I try to connect to the MySQL server with the following commands. $~ mysql -u username -h SQLserver -p Enter password: ERROR 1045 (28000): Access denied for user 'username'@'myIP' (using password: YES) I've done the following: Port is open in the firewall other wise I wouldn't get the error it'd just timeout. MySQL server not running with skip-networking or bind-address username has host as '%' and I can connect locally so the password is correct. GRANT USAGE ON *.* TO username@% IDENTIFIED BY 'password'; FLUSH PRIVILEGES; I wanted to know if anyone had ideas or ran into this issue before and solved it? mysql> select user, host from mysql.user where user='username'; +----------+------+ | user | host | +----------+------+ | username | % | +----------+------+ 1 row in set (0.00 sec) mysql> show grants for 'username'; +----------------------------------------------------------------------------------------------------------------+ | Grants for username@% | +----------------------------------------------------------------------------------------------------------------+ | GRANT ALL PRIVILEGES ON *.* TO 'username'@'%' IDENTIFIED BY PASSWORD '*F42AD03PASSWORDHASHADF4021C86B' | | GRANT ALL PRIVILEGES ON `DB2`.* TO 'username'@'%' | +----------------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• opening a GUID usb stick in windows 7

  - by altomic

  so I have a mac which I have files on. I put in a GUID formatted usb stick and dropped some files on to it. took the stick and plugged in to my netbook with win7. In Devices & Printers it shows up. It also appears in "safely remove hardware". no actual letter or device when i search for it in other ways. Question - how do I access the files of my GUID usb stick on my windows 7 netbook? thanks

  Read the article

• Format text to 5 chars from a number

  - by Wheelersg

  In Access, I used a query to sum some numbers and appended the answer to another table(table2). Now I need to export the number as a text with 5 positions but can't seem to get it to hard code all 5 positions. I have it formatted as text, field length 5, custom foramt "00000" (also tried @@@@@). Example: 3 + 3 + 1 = 7. THen append the 7 to table2. It always shows as 7. I need it to shows as 00007.

  Read the article

• How to File Transfer client to Server?

  - by Phsika

  i try to recieve a file from server but give me error on server.Start() ERROR : In a manner not permitted by the access permissions to access a socket was attempted to How can i solve it? private void btn_Recieve_Click(object sender, EventArgs e) { TcpListener server = null; // Set the TcpListener on port 13000. Int32 port = 13000; IPAddress localAddr = IPAddress.Parse("192.168.1.201"); // TcpListener server = new TcpListener(port); server = new TcpListener(localAddr, port); // Start listening for client requests. server.Start(); // Buffer for reading data Byte[] bytes = new Byte[277577]; String data; data = null; // Perform a blocking call to accept requests. // You could also user server.AcceptSocket() here. TcpClient client = server.AcceptTcpClient(); NetworkStream stream = client.GetStream(); int i; i = stream.Read(bytes, 0, 277577); BinaryWriter writer = new BinaryWriter(File.Open("GoodLuckToMe.jpg", FileMode.Create)); writer.Write(bytes); writer.Close(); client.Close(); }

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >