Search Results

Search found 7606 results on 305 pages for 'raam dev'.

Page 250/305 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• hdparm - how to secure erase SATA SSD over USB

  - by cc0

  I have been following this guide on how to secure erase an SSD (trying to improve the performance of mine, which currently only writes at about 30mb/s seq). However, I'm using an USB--Sata docking device to avoid having the harddrive frozen. Apparently using this solution the SATA device is recognized as a SCSI drive, which is giving me trouble. I use the "hdparm -I /dev/sda" command with those parameters, and I get the error; HDIO_DRIVE_CMD (identify) failed: Invalid Exchange After a lot of googling on the issue I can't seem to find anyone who has actually solved this problem. However, I have not tried to just go ahead and use the secure erase. So I'm not sure if this would actually still work. I would love any and all input I can get on this, especially on whether it will still work to do a secure erase with the drive being recognized as a SCSI drive. The drive itself is a Samsung 256gb SSD (pm800), I'm sure you can understand my reluctance to go through this procedure without feeling reasonably safe that I won't mess it up beyond repair.

  Read the article

• LAN->LAN IP translation (for TortoiseSVN + Artifacts + Buffalo router)

  - by Armchair Bronco

  Here's my scenario: I've got a VisualSVN server on my main dev box @ home. I'm also using Visual Studio 2010, TortoiseSVN, VisualSVN client (for source control), and Versioned 'Artifacts' (for bug tracking). (I had to modify the fake URL's below to use only one slash because as a new user, I can't post more than one real URL.) I've got my Buffalo AirStation WHR-HP-G300N router properly configured so my business partner can connect to the SVN server. I have port forwarding enabled for the internet-side IP address (like http:/99.888.77.66:443) which gets forwarded to an internal IP (like 192.168.11.6). This part is working great. The problem I'm having is with the integration piece between TortoiseSVN and my bug tracking system. I need to provide a bugtraq:url property, but I haven't been able to get relative paths to work. So I'm forced to use an absolute URL. On my end, I need to use the name of my server (for example: bugtraq:url = https:/my-server/svn/bla..), but this doesn't work for my partner. He needs to specify the IP address (for example: bugtraq:url = https:/999.888.77.66:443/svn/bla...) Is there a way to configure my router such that the IP address for this parameter gets re-routed/re-mapped to "https://my-server" if the request originates from the LAN itself? My router's software supports LAN-Internet and Internet-LAN, but I don't see LAN-LAN.

  Read the article

• How much network latency is "typical" for east - west coast USA?

  - by Jeff Atwood

  At the moment we're trying to decide whether to move our datacenter from the west coast to the east coast. However, I am seeing some disturbing latency numbers from my west coast location to the east coast. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: West coast to east coast: 215 ms latency, 46 ms transfer time, 261 ms total West coast to west coast: 114 ms latency, 41 ms transfer time, 155 ms total It makes sense that Corvallis, OR is geographically closer to my location in Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only increased 10%, yet the latency increased 100%! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... Does routing distance affect performance significantly? How does geography affect network latency? Latency in Internet connections from Europe to USA ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

  Read the article

• Fedora 17 - Dropping into debug shell after attempted partitioning

  - by i.h4d35

  So I tried creating a new partition on Fedora 17 using fdisk as follows: Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (2048-823215039, default 2048): Using default value 2048 Last cylinder or +size or +sizeM or +sizeK (1-9039, default 9039): +15G Once this was done,instead of formatting the partition I created, I ran the partprobe command to write the changes to the partition table. On rebooting the computer, it drops to the debug shell and gives me the error as follows: dracut warning:unable to process initqueue dracut warning:/dev/disk/by-uuid/vg_mymachine does not exist dropping to debug shell dracut:/# While trying to run fsck on the said partition from the debug shell, it says "etc/fstab not found" and inside /etc I see a fstab.empty file. Is it now possible to retrieve what I have from the computer? Any help would be appreciated. Thanks in advance Edit: I've also tried the following steps for additional troubleshooting: I tried to boot using the Fedora disk and tried the rescue mode - says no Linux partition detected. I tried to create an fstab file by combining the entries from blkid and the /etc/mtab file and using the UUIDs from the mtab file - It didn't work. As soon as I rebooted the machine, it promptly dropped me in to the debug shell and the fstab file which i created wansn't there anymore in /etc (part of this solution)

  Read the article

• Fedora 9 not reconizing hard drive

  - by Andrew Jones

  I am installing Fedora 9 to a PC (specifications at the bottom) and have had a lot of trouble with it recognising the hard drive. To get the Fedora installer to recognize it in the first place I had to pass "ata_generic.all_generic_ide=1 pci=nomsi" to the kernel, after which it installed OK. However, now when I boot the installed OS, I get a "could not find filesystem '/dev/root'" error. I tried passing the same arguments to the kernel at boot as I did when installing but to no avail. I have tried using the default LVM layout and defining manual ones but it made no difference. There is no option in the BIOS to enable AHCI or anything like that, in fact the BIOS is very limited in most respects. I can get into the system by using the installation CD in rescue mode (with those extra kernal parameters) but I'm not sure what to do once in there... Unfortunately using a more recent version of Fedora or even another Linux distribution altogether isn't an option becuase of outside constraints - which is annoying since I know for a fact Ubuntu works fine on this setup. I have not been using Linux that long, so treat me like an idiot - I am one. Any help would be greatly appreciated, thanks! System spec: Intel Atom Z530 CPU @ 1.6 GHz Intel US15W chipset 1 GB DDR2 160 GB SATA harddisk (Samsung HM16HI) 1000 Mbit/s Ethernet port Phoenix BIOS

  Read the article

• Weird .#filename files on remote ssh-connected systems after mcedit

  - by etranger

  I'm using MacFusion sshfs in combination with Midnight Commander, and when I edit remote text files with mcedit, weird symlinks are created on the remote system. $ ls -l .* lrwxr-xr-x 1 user group 34 Jun 27 01:54 .#filename.txt -> [email protected] where etranger is my local login name, and mbp is a hostname of my notebook running MacOS. symlinks can be removed by running remote rm command, but cannot be deleted on the mac-fuse mounted volume and thus pollutes the filesystem. I cannot figure what part of software is responsible for this, and how I could fix this, any help is appreciated. EDIT: This appears to be mcedit behavior as documented here: https://dev.openwrt.org/ticket/8245 Apparently, sshfs fails to remove symlink to the lock file for some reason (".#" in filename, perhaps), and it pollutes the filesystem. A quick workaround is possible, using another bug of Midnight Commander: editing (F4) the broken symlink effectively converts it to a missing lock file it was supposed to point to, and removes the symlink itself. The newly created file may then be deleted normally. EDIT 2: Unchecking "Follow symlink" in MacFusion apparently allows sshfs to remove dead symlinks, so the problem disappears completely.

  Read the article

• Filtering bad requests from Apache -> logger -> rsyslog to syslog-ng on a remote logging server possible?

  - by zeyus

  EDIT: Thanks for the help Here is a quick idea of the setup: webserver X In apache httpd.conf: LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vcombined CustomLog "|/usr/bin/logger -p local6.info -t access " vcombined In rsyslog.conf: *.* @logserver Logserver syslog-ng.conf: ... parser p_apache {csv-parser(columns( "APACHE.VIRTUAL_HOST", "APACHE.CLIENT_IP", "APACHE.IDENT_NAME", "APACHE.USER_NAME", "APACHE.TIMESTAMP", "APACHE.REQUEST_URL", "APACHE.REQUEST_STATUS", "APACHE.CONTENT_LENGTH", "APACHE.REFERER", "APACHE.USER_AGENT", "APACHE.PROCESS_TIME", "APACHE.SERVER_NAME") # flags: # escape-none,escape-backslash,escape-double-char, # strip-whitespace flags(escape-double-char,strip-whitespace) delimiters(" ") quote-pairs('""[]') );}; ... source s_net { udp(ip(0.0.0.0) port(514) so_rcvbuf(1048576)); }; destination hosts_acc { file("/var/log/hosts/$HOST/${APACHE.VIRTUAL_HOST}_acc.log"); }; filter f_apacheacc { facility(local6); }; log { source(s_net); parser(p_apache); filter(f_apacheacc); destination(hosts_acc); }; ... The log's get there just fine, but there are a LOT of logs like the following: -rw------- 1 root root 5726 Apr 6 01:02 xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 23435 Apr 6 01:06 \xc3\x9ed$yA;_acc.log -rw------- 1 root root 745 Apr 6 00:57 xc3\x9ed$yA;_acc.log -rw------- 1 root root 8440 Apr 5 22:50 \xc3\xaf_F\xc3\x95$yA;_acc.log -rw------- 1 root root 3112 Apr 6 00:58 xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 4220 Apr 5 22:03 xe2\x80\x98\twd\xc2\xa2\xc2\xb0\xc3\x96$yA;_acc.log -rw------- 1 root root 1055 Apr 5 22:03 xe2\x80\x98\xc2\x9dw\xc3\x94\xc3\xb4T\xc5\x93$yA;_acc.log -rw------- 1 root root 1821 Apr 6 00:58 \xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 2875 Apr 6 01:02 xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log -rw------- 1 root root 3165 Apr 5 22:48 \xe2\x80\x99-w\xc3\xaf_F\xc3\x95$yA;_acc.log -rw------- 1 root root 3165 Apr 5 22:40 \xe2\x80\x99\xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 15825 Apr 5 22:50 xe2\x80\x99\xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 1055 Apr 5 22:39 \xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 2110 Apr 5 22:50 xe2\x80\x9aw\xe2\x82\xac\xc2\xbd\xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 2034 Apr 5 22:50 \xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 4066 Apr 5 22:45 xe2\x80\x9d($yA;_acc.log -rw------- 1 root root 7212 Apr 6 13:30 \xe2\x80\xb9>$yA;_acc.log -rw------- 1 root root 3000 Apr 6 13:25 xe2\x80\xb9>$yA;_acc.log My question is where, and how can I filter these out, I don't want them on the filesystem (But actually I guess it wouldn't be a bad idea to keep them logged, but in their correct VHost file) Here is an example VHost <VirtualHost *:80> ServerAdmin [email protected] ServerName xxx.xx DocumentRoot /var/www/vhosts/xxx <Directory /var/www/vhosts/xxx> AllowOverride All Options All RewriteEngine on </Directory> </VirtualHost> And the default "catch-all" vhost at the bottom of the vhosts config file: <VirtualHost *:80> ServerName default ServerAlias * ServerAlias catchall.xxx.xx DocumentRoot /var/www/vhosts/nodomain <Directory "/var/www/vhosts/nodomain"> Options Indexes FollowSymLinks AllowOverride none Allow from All </Directory> CustomLog /dev/null combined ErrorLog /dev/null </VirtualHost> I had posted this in a related question but It's better in it's own question. Here are some examples from inside the log files r_acc.log: Apr 7 11:16:27 xxxxx access: r PC 5.0; eSobiSubscriber 2.0.4.16; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Apr 7 11:16:28 xxxxx access: r PC 5.0; eSobiSubscriber 2.0.4.16; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" ######################## D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log: Apr 7 14:54:06 xxxxx access: D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; B557000E-F20D-35DD-021A-9824EC-17A4AFV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 3BD03D7B-EEFD-83FF-7599-B751AD-6F0A2EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 9CAE0724-D455-0B31-3378-871C11-BBD0A4V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; C1E24799-3979-2452-81-3BAA0FFD361F5A; 0E701CBC-5832-5AB6-D5-CFBF9BDE863EAA; 464714B1-B3E2-774A-A4-FEA612A46CEE06; 74C817B0-D081-D2CC-6D-C4EF0F1B4F49BB; 1338B1DE-67CD-977C-B35D-1F2C4441DD6A; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; BRI/2)" ######################## V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA;_acc.log: Apr 7 14:55:04 xxxxx access: V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; FEEACE4F-092A-1D46-28E2-0FBC95-78798EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; B557000E-F20D-35DD-021A-9824EC-17A4AFV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 3BD03D7B-EEFD-83FF-7599-B751AD-6F0A2EV\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; 9CAE0724-D455-0B31-3378-871C11-BBD0A4V\xe2\x80\x94w\xe2\x80\x98\xc3\x9d\xc3\x9ed$yA; C1E24799-3979-2452-81-3BAA0FFD361F5A; 0E701CBC-5832-5AB6-D5-CFBF9BDE863EAA; 464714B1-B3E2-774A-A4-FEA612A46CEE06; 74C817B0-D081-D2CC-6D-C4EF0F1B4F49BB; 1338B1DE-67CD-977C-B35D-1F2C4441DD6A; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; BRI/2)" ################### xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA;_acc.log: Apr 7 19:48:39 xxxxx access: xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 3C12D25C-9D40-91CF-1F40-AC-B1A083426DV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; D4713FA8-0142-A0C2-4812-BA-E03221005BV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 199BAF2A-ECD5-39FA-65C3-E8-B107FAFF08V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 384BDA70-9954-7744-05A0-C4-C7D9FEA685V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; EE7292A9-333C-AF70-5A7F-55-CAA7D0BA39V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; -AD7D48FA3A55-2A33-D10B-B4B66276D8B8; -166A9C6A2E71-24DF-A192-C8258AA4DE14; -00077C6C84E0-A302-4954-3D6D17C54D31; 3F56C318-EC3C-432B-680F-7E4BB2B852C4; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Apr 7 19:48:39 xxxxx access: xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 3C12D25C-9D40-91CF-1F40-AC-B1A083426DV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; D4713FA8-0142-A0C2-4812-BA-E03221005BV-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 199BAF2A-ECD5-39FA-65C3-E8-B107FAFF08V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; 384BDA70-9954-7744-05A0-C4-C7D9FEA685V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; EE7292A9-333C-AF70-5A7F-55-CAA7D0BA39V-w\xc2\x90\xc3\x91\xc3\x94\xc2\xab$yA; -AD7D48FA3A55-2A33-D10B-B4B66276D8B8; -166A9C6A2E71-24DF-A192-C8258AA4DE14; -00077C6C84E0-A302-4954-3D6D17C54D31; 3F56C318-EC3C-432B-680F-7E4BB2B852C4; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)" Thanks

  Read the article

• Linux: Force fsck of a read-only mounted filesystem?

  - by Timothy Miller

  I'm developing for a headless embedded appliance, running CentOS 6.2. The user can connect a keyboard, but not a monitor, and a serial console would require opening the case, something we don't want the user to have to do. This all pretty much obviates the possibility of using a recovery USB drive to boot from, unless all it does is blindly reimage the harddrive. I would like to provide some recovery facilities, and I have written a tool that comes up on /dev/tty1 in place of getty to provide these functions. One such function is fsck. I have found out how to remount the root and other file systems read-only. Now that they are read-only, it should be safe to fsck them and then reboot. Unfortunately, fsck complains to me that the filesystems are mounted and refuses to do anything. How can I force fsck to run on a read-only mounted partition? Based on my research, this is going to have to be something obscure. "-f" just means to force repair of a clean (but unmounted) partition. I need to repair a clean or unclean mounted partition. From what I read, this is something "only experts" should do, but no one has bothered to explain how the experts do it. I'm hoping someone can reveal this to me. BTW, I've noticed that e2fsck 1.42.4 on Gentoo will let you fsck a mounted partition, even mounted read-write, but it seems only to do so if fsck is run from a terminal, so it can ask the user if they're sure they want to do something so dangerous. I'm not sure if the CentOS version does the same thing, but it appears that fsck CAN repair a mounted partition, but it flatly refuses to when not run from a terminal. One last-resort option is for me to compile my own hacked fsck. But I'm afraid I'll mess it up in some unexpected way. Thanks! Note: Originally posted here.

  Read the article

• cups log kills ubuntu 12.04 and sudoer permissions changed

  - by peterretief

  I am using Ubuntu 12.04 as a desktop and recently had a weird crash with the log file for cups filling up the entire drive and not letting me back in, also what changed was /var/lib/sudo had changed from root to peter (me) I didn't make this change - I checked the history! I set the sudoers back to root and capped the max size for cups log Anyone had a similar experience? It feels like someone is messing around with my settings Is there any way to trace how the error occurred? Logs auth.log Jan 1 02:04:13 peter-desktop lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jan 1 02:04:13 peter-desktop lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 Jan 1 02:06:53 peter-desktop lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jan 1 02:06:53 peter-desktop lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 syslog Jan 1 02:04:13 peter-desktop rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="903" x-info="http://www.rsyslog.com"] start Jan 1 02:04:13 peter-desktop rsyslogd: rsyslogd's groupid changed to 103 Jan 1 02:04:13 peter-desktop rsyslogd: rsyslogd's userid changed to 101 Jan 1 02:04:13 peter-desktop rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Jan 1 02:04:13 peter-desktop bluetoothd[898]: Failed to init gatt_example plugin Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Linux version 3.2.0-25-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP Wed May 23 22:11:24 UTC 2012 (Ubuntu 3.2.0-25.40-generic-pae 3.2.18) Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] KERNEL supported cpus: Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] Intel GenuineIntel Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] AMD AuthenticAMD Jan 1 02:04:13 peter-desktop kernel: [ 0.000000] NSC Geode by NSC

  Read the article

• Migrating to CF9: trouble getting JRun working with SSL

  - by DaveBurns

  I have a client on MX7 who wants to migrate to CF9. I have a dev environment for them on my WinXP machine where I've configured MX7 to run with JRun's built-in web server. I've had that working for a long time with both regular and SSL connections. I installed CF9 yesterday side-by-side with the existing MX7 install to start testing. The install was smooth and detected MX7, adjusted CF9's port numbers for no conflict, etc. Testing started well: MX7 over regular and SSL still worked and CF9 worked over regular HTTP. But I can't get CF9 to work with SSL. I installed a new certificate with keytool, FireFox (v3.6) complained about it being unsigned, I added it to the exception list, and now I get this: Secure Connection Failed An error occurred during a connection to localhost:9101. Peer reports it experienced an internal error. (Error code: ssl_error_internal_error_alert) I've been Googling that in all variations but can't find much help to get past this. I don't see any info in any log files either. FWIW, here's my SSL config from SERVER-INF/jrun.xml: <service class="jrun.servlet.http.SSLService" name="SSLService"> <attribute name="enabled">true</attribute>` <attribute name="interface">*</attribute> <attribute name="port">9101</attribute> <attribute name="keyStore">{jrun.rootdir}/lib/mykey</attribute> <attribute name="keyStorePassword">*deleted*</attribute> <attribute name="trustStore">{jrun.rootdir}/lib/trustStore</attribute> <attribute name="socketFactoryName">jrun.servlet.http.JRunSSLServerSocketFactory</attribute> <attribute name="deactivated">false</attribute> <attribute name="bindAddress">*</attribute> <attribute name="clientAuth">false</attribute> </service> Anyone here know of any issues re setting up SSL and CF9? Anyone had success with it? Dave

  Read the article

• Change the default route without affecting existing TCP connections

  - by Patrick Horn

  Let's say I have two public network addresses on my server: one NAT through an ISP (192.168.99.0/24), and a VPN through a different ISP (192.168.1.0/24), already configured with a per-host route to the VPN server through my ISP. Here is my initial routing table. I am currently routing through my ISP on subnet 192.168.99.0/24. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.99.1 0.0.0.0 UG 0 0 0 eth1 55.66.77.88 192.168.99.1 255.255.255.255 UGH 0 0 0 eth1 192.168.99.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Now, I want new TCP connections to switch to my 192.168.1.0/24 so I type the following: $ route add -net 0.0.0.0 gw 192.168.1.1 dev tap0 When I do this, it causes some long-standing TCP connections to hang. Is there a way to I safely change the default interface for new connections, while allowing existing TCP connections to use the old route (i.e. do I need enable some sort of stateful routing table)? I am okay with a solution that only works with established TCP connections, and I don't care how hacky it is. For example, if there is a way to add temporary iptables rules for existing connections to force them over the old route. But there has to be some way to do this. EDIT: Just a note about a simple "route add -host ... " for existing connections: this solution would work if I am fine with leaving a subset of IPs on the old interface. However, in my application, this actually doesn't solve my problem because I want to allow new connections to come on the new interface even if they have the same source IP. I'm now looking at using the "ip route" command to set source-based routing rules.

  Read the article

• Instabilities with Bridged and bonded interfaces

  - by Henry-Nicolas Tourneur

  I did post yesterday to get a working setup with several bridged interfaces used for virtual machines (KVM/libvirt). One of the bridged interface is just using eth3 as its ports while the second one (public traffic) is using an ethernet bonded interface. That setup is working but not all the time ! I can start a download from a vm, then it will stop and freeze! So I don't know if my bridge parameters are correct, could you check the below config ? iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.255 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.255 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.255 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.255 And yes, it also sometimes speaks about martian on the host: kernel: [249146.055172] martian source 10.160.0.17 from 10.160.0.10, on dev vnet2 kernel: [249146.073122] ll header: ff:ff:ff:ff:ff:ff:54:52:00:76:c3:5c:08:06

  Read the article

• ServerName not working in Apache2 and Ubuntu

  - by CreativeNotice

  Setting up a dev LAMP server and I wish to allow dynamic subdomains, aka ted.servername.com, bob.servername.com. Here's my sites-active file <VirtualHost *:80> # Admin Email, Server Name, Aliases ServerAdmin [email protected] ServerName happyslice.net ServerAlias *.happyslice.net # Index file and Document Root DirectoryIndex index.html DocumentRoot /home/sysadmin/public_html/happyslice.net/public # Custom Log file locations LogLevel warn ErrorLog /home/sysadmin/public_html/happyslice.net/log/error.log CustomLog /home/sysadmin/public_html/happyslice.net/log/access.log combined And here's the output from sudo apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and default servers: *:80 is a NameVirtualHost default server happyslice.net (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost happyslice.net (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost happyslice.net (/etc/apache2/sites-enabled/happyslice.net:5) Syntax OK The server hostname is srv.happyslice.net. As you can see from apache2ctl when I use happyslice.net I get the default virtual host, when I use a subdomain, I get the happyslice.net host. So the later is working how I want, but the main url does not. I've tried all kinds of variations here, but it appears that ServerName just isn't being tied to the correct location. Thoughts? I'm stumped. FYI, I'm running Apache2.1 and Ubuntu 10.04 LTS

  Read the article

• Setting up Windows SBS 2008 network on Xen

  - by samyboy

  I'm trying to install a Windows SBS 2008 server in a Xen environment. The OS is booting fine. Unfortunately I can't figure out how to set up the network settings. Dom0 is a Debian Lenny hosting around 10 virtual servers. Here are the settings I'm using in the hosted Windows SBS: IP address: 10.20.0.8 Network mask: 255.255.0.0 Gateway: 10.20.0.1 Note that during the installation stage, Windows set the net mask at 255.255.255.0 without letting me choose. Gross. Windows SBS tells me I have a "limited connection". I can't ping the gateway nor any other IP except localhost and it's own IP (10.20.0.8). Here is the Xen config file: kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder = 'hvm' memory = '4096' device_model='/usr/lib/xen-3.2-1/bin/qemu-dm' acpi=1 apic=1 pae=1 vcpus=1 name = 'winexchange' # Disks disk = [ 'phy:/dev/wnghosts/exchange-disk,ioemu:hda,w', 'file:/mnt/freespace/ISO/DVD1_Installation.iso,ioemu:hdc:cdrom,r' ] # Networking vif = [ 'mac=00:16:3E:0A:D0:1B, type=ioemu, bridge=xenbr0'] # video stdvga=0 serial='pty' ne2000=0 # Behaviour boot='c' sdl=0 # VNC vfb = [ 'type=vnc' ] vnc=1 vncdisplay=1 vncunused=1 usbdevice='tablet' This config is working with others Windows XP domU's. I tried to change the ne2000 values with 0 and 1 with no effect. I am far from having good Windows administration skills so I guess I definitely need some help on this case. Thanks.

  Read the article

• Issue running 32-bit executable on 64-bit Windows

  - by David Murdoch

  I'm using wkhtmltopdf to convert HTML web pages to PDFs. This works perfectly on my 32-bit dev server [unfortunately, I can't ship my machine :-p ]. However, when I deploy to the web application's 64-bit server the following errors are displayed: (running from cmd.exe) C:\>wkhtmltopdf http://www.google.com google.pdf Loading pages (1/5) QFontEngine::loadEngine: GetTextMetrics failed () ] 10% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () QFontEngine::loadEngine: GetTextMetrics failed () ] 36% QFontEngineWin: GetTextMetrics failed () QFontEngineWin: GetTextMetrics failed () // ...etc.... and the PDF is created and saved... just WITHOUT text. All form-fields, images, borders, tables, divs, spans, ps, etc are rendered accurately...just void of any text at all. Server information: Windows edition: Windows Server Standard Service Pack 2 Processor: Intel Xeon E5410 @ 2.33GHz 2.33 GHz Memory: 8.00 GB System type: 64-bit Operating System Can anyone give me a clue as to what is happening and how I can fix this? Also, I wasn't sure what to tag/title this question with...so if you can think of better tags/title comment them or edit the question. :-)

  Read the article

• Issues with ASP.NET via Apache/mod_mono on Ubuntu.

  - by Matthew Scharley

  I run an Ubuntu test server, and my deployment system is also Ubuntu. I've recently been trying to get ASP.NET to work on my test server so that we can take it live. I managed to get it installed, and configured properly, and my application is installed and running, but I can't get anything to work. The error I keep receiving is below, if anyone has any clue what might be going on, it would be greatly appreciated. Server Error in '/' Application Standard output has not been redirected or process has not been started. Description: HTTP 500. Error processing request. Stack Trace: System.InvalidOperationException: Standard output has not been redirected or process has not been started. at System.Diagnostics.Process.CancelErrorRead () [0x00000] at (wrapper remoting-invoke-with-check) System.Diagnostics.Process:CancelErrorRead () at Mono.CSharp.CSharpCodeCompiler.CompileFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at Mono.CSharp.CSharpCodeCompiler.CompileAssemblyFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromFile (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath, System.CodeDom.Compiler.CompilerParameters options) [0x00000] at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] at System.Web.Compilation.BuildManager.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] Version information: Mono Version: 2.0.50727.42; ASP.NET Version: 2.0.50727.42 Apache version String: Apache/2.2.11 (Ubuntu) mod_mono/2.0 PHP/5.2.6-3ubuntu4.2 with Suhosin-Patch Server at dev Port 80 PS: I had to add three DLL's to the /bin directory in my application, copying them from Windows because I couldn't find them in any of Mono's packages. This might or might not be causing problems, I don't know. The list that I had to add is: System.Web.Abstractions System.Web.Routing System.Web.Mvc

  Read the article

• Getting Grub2 to recognize a Raid 10 boot/root

  - by xenoterracide

  I've been trying to get my raid to boot from grub2 for about 2 days now and I don't seem to be getting closer. The problem appears to be that it doesn't recognize my raid at all. It doesn't see (md0) etc. I'm not sure Why or how to change this. I'm using mdadm, 2 device (essentially a raid1) raid10,f2, which is currently degraded. I have tried adding the raid and mdraid modules with grub install along with others. I've tried several variation on grub-install such as grub-install --debug --no-floppy --modules="biosdisk part_msdos chain raid mdraid ext2 linux search ata normal" /dev/md0 I've been searching the net for an answer to what I haven't done but no luck. On my other drive which I plan on removing the raid is initialized and mounted fine on boot, but it's not the boot/root for that setup. My grub.cfg isn't recognized by grub since it can't read the raid partition so I'm not posting that. md0 is not listed in my /boot/grub/device.map.

  Read the article

• Burn bootable iso image to USB stick using dd: Won't boot (despite USB first in boot sequence)

  - by Nicolas Raoul

  I have installed Ubuntu on a Lenovo Thinkpad R500 2732, and I must update the BIOS. On the Lenovo website, I am offered this: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad R500 I guess a bootable CD that would do a BIOS update is indeed what I need. (still wondering why it says "Windows" though... if it is bootable should not it be OS-agnostic?) Not wanting to waste a CD, I copied the image to my USB stick: sudo dd if=/home/nico/7yuj40uc.iso of=/dev/sdb1 bs=1M And rebooted, after making sure USB is first in the boot sequence. PROBLEM: It does not boot. Did I forget one step? Details about the iso image (readme): ls -lh 7yuj40uc.iso 25M file 7yuj40uc.iso /home/nico/7yuj40uc.iso: # ISO 9660 CD-ROM filesystem data '7YUJ40US ' (bootable) (Scroll to the right: it says "bootable") UNetbootin does not work because it is not a Linux image. Some people on the Internet advise to copy the content of the ISO and do other steps. This ISO has zero ISO content so it would not work. If I mount the ISO, I can see it contains zero files.

  Read the article

• Issue with InnoDB engine while enabling and [ skip-innodb ] - [ERROR] Plugin 'InnoDB' init function returned error

  - by Ahn

  How to enable InnoDB, which was previously disabled with skip-innodb option. Case 1: Disabled the innodb with skip-innodb option and show engines givens as below. Engine | Support ... | InnoDB | NO ...... Case 2: As I want to enable the innodb, I commanded the #skip-innodb option and restarted. But now the show engines even not showing the InnoDB engine in the list. ? Mysql Version : 5.1.57-community-log OS : CentOS release 5.7 (Final) Log: 120622 13:06:36 InnoDB: Initializing buffer pool, size = 8.0M 120622 13:06:36 InnoDB: Completed initialization of buffer pool InnoDB: No valid checkpoint found. InnoDB: If this error appears when you are creating an InnoDB database, InnoDB: the problem may be that during an earlier attempt you managed InnoDB: to create the InnoDB data files, but log file creation failed. InnoDB: If that is the case, please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/error-creating-innodb.html 120622 13:06:36 [ERROR] Plugin 'InnoDB' init function returned error. 120622 13:06:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 120622 13:06:36 [Note] Event Scheduler: Loaded 0 events 120622 13:06:36 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.57-community-log' socket: '/data/mysqlsnd/mysql.sock1' port: 3307 MySQL Community Server (GPL)

  Read the article

• Samba server NETBIOS name not resolving, WINS support not working

  - by Eric

  When I try to connect to my CentOS 6.2 x86_64 server's samba shares using address \\REPO (NETBIOS name of REPO), it times out and shows an error; if I do so directly via IP, it works fine. Furthermore, my server does not work correctly as a WINS server despite my samba settings being correct for it (see below for details). If I stop the iptables service, things work properly. I'm using this page as a reference for which ports to use: http://www.samba.org/samba/docs/server_security.html Specifically: UDP/137 - used by nmbd UDP/138 - used by nmbd TCP/139 - used by smbd TCP/445 - used by smbd I really really really want to keep the secure iptables design I have below but just fix this particular problem. SMB.CONF [global] netbios name = REPO workgroup = AWESOME security = user encrypt passwords = yes # Use the native linux password database #passdb backend = tdbsam # Be a WINS server wins support = yes # Make this server a master browser local master = yes preferred master = yes os level = 65 # Disable print support load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes # Restrict who can access the shares hosts allow = 127.0.0. 10.1.1. [public] path = /mnt/repo/public create mode = 0640 directory mode = 0750 writable = yes valid users = mangs repoman IPTABLES CONFIGURE SCRIPT # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming HTTP #iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -p udp --dport 137 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 137 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp --dport 138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 445 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 445 -m state --state ESTABLISHED -j ACCEPT # Make these rules permanent service iptables save service iptables restart**strong text**

  Read the article

• How to "swap in" again memory from page file to physical memory in Windows at once (like linux swap-off)

  - by Arnout

  Is there a way to swap back in (to put back all the memory data that was put into the page file (or swap, whatever you prefer)) memory on a windows PC? On linux, one can easily do this with the swapoff /dev/sdaX, where X is the swap partition. On windows, it seems to ask me to reboot each time.. The reason I'd like to do this, is that, even though swapping out the data to the swap file allows me to play a resource-hungry game fully in physical ram, when I stop the game, all the rest of my programs run slow. This is or course normal; all the programs were pushed into the page file because my RAM was too small, and all memory access to those programs after gaming bumps into hard page faults, with major delays and some frustration as a consequence. However, that frustration could easily be avoided, by simply allowing the PC to copy all data back into the physical memory for a minute or so, and then resume working on a fast working PC! (rather than having to endure the slowness -while- working) Thanks in advance for any advice on this! Kind regards

  Read the article

• Poor Write Performance in VM inside Proxmox PVE 2.0

  - by sorsenne

  I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

  Read the article

• With Ubuntu 9.10, my DVD keeps spinning up

  - by Ken

  I have Ubuntu 9.10 on my Intel Mac Mini. When there's a DVD in the drive, and even if there's no program open at all (just looking at the desktop), every minute or so the disc spins up with a loud whirring noise, and I can hear it cranking the motor to seek across the disc. How do I find out what's causing this? And how can I make it stop? Thanks! EDIT: I straced nautilus, and saw nothing it's doing directly, even when the disc spins up. It does poll inotify regularly, but I don't know how to trace what it's watching, or if that's even how it receives disc-inserted notifications. It doesn't call inotify_add_watch when I insert a disc or mount it (or eject or umount), but it could be watching all of /dev already or something like that. Of course, a DVD is mounted read-only, so whether it's inotify or something else, it should never need to poll anything on that. And if it is inotify, it's happening in the kernel, and the kernel should really never need to poll a device it's mounted to check for notifications.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >