Search Results

Search found 29627 results on 1186 pages for 'auto update'.

Page 251/1186 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• Installation problems with Gimp 2.8 on Kubuntu 12

  - by Martyn

  I've just upgraded to Kubuntu 12.04 and having problems installing Gimp 2.8, I was wondering if anyone can help me? I've followed these instructions: sudo add-apt-repository ppa:otto-kesselgulasch/gimp sudo apt-get update sudo apt-get install gimp but get this error: The following packages have unmet dependencies. gimp : Depends: libwebkitgtk-1.0-0 (>= 1.3.10) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I've tried running these and trying again with the same problems: sudo apt-get clean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install also running sudo apt-get install libwebkitgtk-1.0-0 gives me this error The following packages have unmet dependencies. libwebkitgtk-1.0-0 : Depends: libgail18 (>= 1.18.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. and then running sudo apt-get install libgail18 gives me this error The following packages have unmet dependencies. libgail18 : Depends: libgtk2.0-0 (= 2.24.10-0ubuntu6) but 2.24.10-1oneiric6~ppa is to be installed E: Unable to correct problems, you have held broken packages. The bit that caught my attention was but 2.24.10-1oneiric6~ppa is to be installed - but I don't know what to do with this. I've rebooted and the error messages are the same. Can anyone help? ** EDIT ** I've found someone with the same problem, unfortunately the link is in German so I can't completely understand what the solution (last post) is - here's the google translated link : http://translate.google.com/translate?sl=auto&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwebcache.googleusercontent.com%2Fsearch%3Fq%3Dcache%3A1U2Uat6XqUsJ%3Aforum.ubuntuusers.de%2Ftopic%2Fprobleme-nach-update-fehlerhafte-pakete-aus-on%2F%2B%26cd%3D3%26hl%3Den%26ct%3Dclnk%26gl%3Duk&act=url

  Read the article

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• Installing Visual Studio 2010 Service Pack 1

  - by Martin Hinshelwood

  As has become customary when the product team releases a new patch, SP or version I like to document the install. This post seams almost redundant as I had no problems, but I think that is as valuable to other thinking of installing the Service Pack as all the problems that we sometimes get. As per Brian's post I am Installing Visual Studio Team Foundation Server Service Pack 1 first and indeed as this is a single server local deployment I need to install both. If I only install one it will leave the other product broken. Figure: Hopefully this will be more uneventful It takes a little while for your system to be checked to see what components need updating. On my main computer this was pretty quick, but on the laptop it took some time. Figure: There are a lot of components to update With this update also comes an update to .NET as well as many other components. Figure: I downloaded the full 1.5GB’s, but you could do a web install It depends on how good you internet connection is to how long it would take to download, but as I am now in the US I decided not to trust the internet connection speeds. It took around 30-40 minutes to download the full thing which is a little slow. Figure: I did not need to download, but that would increase the install time So on my main computer again this was fast, but again on my netbook this took a little while. Figure: The actual install took around 30-40 minutes (2 hours on netbook) I was pretty impressed with the speed of the install, and as Team Explore is now out of the box with Visual Studio 2010 I don’t get the problem of the SP being installed before Team Explorer and having a disjointed experience Figure: As I suspected, no problems with the install Figure: Checking in Visual Studio shows that all the servicing points were successful This was an easy experience even if the SP was over 1.5GB’s to download Hopefully I will be discovering things that work better for a good while to come, as well as not seeing holes in the product that I had no encountered yet. What were your experiences of installing Visual Studio 2010 Service pack 1?

  Read the article

• Detecting walls or floors in pygame

  - by Serial

  I am trying to make bullets bounce of walls, but I can't figure out how to correctly do the collision detection. What I am currently doing is iterating through all the solid blocks and if the bullet hits the bottom, top or sides, its vector is adjusted accordingly. However, sometimes when I shoot, the bullet doesn't bounce, I think it's when I shoot at a border between two blocks. Here is the update method for my Bullet class: def update(self, dt): if self.can_bounce: #if the bullet hasnt bounced find its vector using the mousclick pos and player pos speed = -10. range = 200 distance = [self.mouse_x - self.player[0], self.mouse_y - self.player[1]] norm = math.sqrt(distance[0] ** 2 + distance[1] ** 2) direction = [distance[0] / norm, distance[1 ] / norm] bullet_vector = [direction[0] * speed, direction[1] * speed] self.dx = bullet_vector[0] self.dy = bullet_vector[1] #check each block for collision for block in self.game.solid_blocks: last = self.rect.copy() if self.rect.colliderect(block): topcheck = self.rect.top < block.rect.bottom and self.rect.top > block.rect.top bottomcheck = self.rect.bottom > block.rect.top and self.rect.bottom < block.rect.bottom rightcheck = self.rect.right > block.rect.left and self.rect.right < block.rect.right leftcheck = self.rect.left < block.rect.right and self.rect.left > block.rect.left each test tests if it hit the top bottom left or right side of the block its colliding with if self.can_bounce: if topcheck: self.rect = last self.dy *= -1 self.can_bounce = False print "top" if bottomcheck: self.rect = last self.dy *= -1 #Bottom check self.can_bounce = False print "bottom" if rightcheck: self.rect = last self.dx *= -1 #right check self.can_bounce = False print "right" if leftcheck: self.rect = last self.dx *= -1 #left check self.can_bounce = False print "left" else: # if it has already bounced and colliding again kill it self.kill() for enemy in self.game.enemies_list: if self.rect.colliderect(enemy): self.kill() #update position self.rect.x -= self.dx self.rect.y -= self.dy This definitely isn't the best way to do it but I can't think of another way. If anyone has done this or can help that would be awesome!

  Read the article

• Why can't I install from software center?

  - by user64720

  There was a problem upgrading to Firefox 13. This error kept returning: /var/cache/apt/archives/firefox_13.0+build1-0ubuntu0.12.04.1_i386.deb W: Waited for dpkg --assert-multi-arch but was not there - dpkgGo (10: There are no "child" processes). Now it seems that there is some problem with dpkg and I can't install anything from software center. I already tried to clean previous packages with sudo rm /var/lib/apt/lists/* -vf and then sudo apt-get update, it didn't work. When running sudo dpkg --configure -a, I get this: dpkg: problems with dependencies prevent the configuration of firefox-globalmenu: firefox-globalmenu depends on firefox (= 13.0+build1-0ubuntu0.12.04.1); however: The package is not installed. dpkg: error while processing firefox-globalmenu (--configure): problems com dependencies - leaving unconfigured There has been found errors while processing: firefox-globalmenu What should I do to fix this?? EDIT: I don't have the necessary expertise to understand why what I did worked and what was causing the conflict, but anyway, since there was a problem with firefox-globalmenu:, I went to synaptics package manager, I removed this particular package and reinstalled it. After that, I was able to install Firefox from synaptics and also any other applications from software center. However, still there was a problem, when running sudo apt-get update, the following kept returning: Failed to get gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages Verification code hash doesn't match. E: Some archives index failed at being downloaded. They have been ignored, or older copies are used instead. So I typed sudo rm /var/lib/apt/lists/* -vf in terminal and then again sudo apt-get update and everything is fine now. I did this before an answer was posted, anyway I agree the problem was that particular package and its removal. So I'll mark the below answer as accepted.

  Read the article

• Animation Trouble with Java Swing Timer - Also, JFrame Will Not Exit_On_Close

  - by forgotton_semicolon

  So, I am using a Java Swing Timer because putting the animation code in a run() method of a Thread subclass caused an insane amount of flickering that is really a terrible experience for any video game player. Can anyone give me any tips on: Why there is no animation... Why the JFrame will not close when it is coded to Exit_On_Close 2 times My code is here: import java.awt.; import java.awt.event.; import javax.swing.*; import java.net.URL; //////////////////////////////////////////////////////////////// TFQ public class TFQ extends JFrame { DrawingsInSpace dis; //========================================================== constructor public TFQ() { dis = new DrawingsInSpace(); JPanel content = new JPanel(); content.setLayout(new FlowLayout()); this.setContentPane(dis); this.setDefaultCloseOperation(EXIT_ON_CLOSE); this.setTitle("Plasma_Orbs_Off_Orion"); this.setSize(500,500); this.pack(); //... Create timer which calls action listener every second.. // Use full package qualification for javax.swing.Timer // to avoid potential conflicts with java.util.Timer. javax.swing.Timer t = new javax.swing.Timer(500, new TimePhaseListener()); t.start(); } /////////////////////////////////////////////// inner class Listener thing class TimePhaseListener implements ActionListener, KeyListener { // counter int total; // loop control boolean Its_a_go = true; //position of our matrix int tf = -400; //sprite directions int Sprite_Direction; final int RIGHT = 1; final int LEFT = 2; //for obstacle Rectangle mega_obstacle = new Rectangle(200, 0, 20, HEIGHT); public void actionPerformed(ActionEvent e) { //... Whenever this is called, repaint the screen dis.repaint(); addKeyListener(this); while (Its_a_go) { try { dis.repaint(); if(Sprite_Direction == RIGHT) { dis.matrix.x += 2; } // end if i think if(Sprite_Direction == LEFT) { dis.matrix.x -= 2; } } catch(Exception ex) { System.out.println(ex); } } // end while i think } // end actionPerformed @Override public void keyPressed(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyReleased(KeyEvent arg0) { // TODO Auto-generated method stub } @Override public void keyTyped(KeyEvent event) { // TODO Auto-generated method stub if (event.getKeyChar()=='f'){ Sprite_Direction = RIGHT; System.out.println("matrix should be animating now "); System.out.println("current matrix position = " + dis.matrix.x); } if (event.getKeyChar()=='d') { Sprite_Direction = LEFT; System.out.println("matrix should be going in reverse"); System.out.println("current matrix position = " + dis.matrix.x); } } } //================================================================= main public static void main(String[] args) { JFrame SafetyPins = new TFQ(); SafetyPins.setVisible(true); SafetyPins.setSize(500,500); SafetyPins.setResizable(true); SafetyPins.setLocationRelativeTo(null); SafetyPins.setDefaultCloseOperation(EXIT_ON_CLOSE); } } class DrawingsInSpace extends JPanel { URL url1_plasma_orbs; URL url2_matrix; Image img1_plasma_orbs; Image img2_matrix; // for the plasma_orbs Rectangle bbb = new Rectangle(0,0, 0, 0); // for the matrix Rectangle matrix = new Rectangle(-400, 60, 430, 200); public DrawingsInSpace() { //load URLs try { url1_plasma_orbs = this.getClass().getResource("plasma_orbs.png"); url2_matrix = this.getClass().getResource("matrix.png"); } catch(Exception e) { System.out.println(e); } // attach the URLs to the images img1_plasma_orbs = Toolkit.getDefaultToolkit().getImage(url1_plasma_orbs); img2_matrix = Toolkit.getDefaultToolkit().getImage(url2_matrix); } public void paintComponent(Graphics g) { super.paintComponent(g); // draw the plasma_orbs g.drawImage(img1_plasma_orbs, bbb.x, bbb.y,this); //draw the matrix g.drawImage(img2_matrix, matrix.x, matrix.y, this); } } // end class enter code here

  Read the article

• Why can't I compare two Texture2D's?

  - by Fiona

  I am trying to use an accessor, as it seems to me that that is the only way to accomplish what I want to do. Here is my code: Game1.cs public class GroundTexture { private Texture2D dirt; public Texture2D Dirt { get { return dirt; } set { dirt = value; } } } public class Main : Game { public static Texture2D texture = tile.Texture; GroundTexture groundTexture = new GroundTexture(); public static Texture2D dirt; protected override void LoadContent() { Tile tile = (Tile)currentLevel.GetTile(20, 20); dirt = Content.Load<Texture2D>("Dirt"); groundTexture.Dirt = dirt; Texture2D texture = tile.Texture; } protected override void Update(GameTime gameTime) { if (texture == groundTexture.Dirt) { player.TileCollision(groundBounds); } base.Update(gameTime); } } I removed irrelevant information from the LoadContent and Update functions. On the following line: if (texture == groundTexture.Dirt) I am getting the error Operator '==' cannot be applied to operands of type 'Microsoft.Xna.Framework.Graphics.Texture2D' and 'Game1.GroundTexture' Am I using the accessor correctly? And why do I get this error? "Dirt" is Texture2D, so they should be comparable. This using a few functions from a program called Realm Factory, which is a tile editor. The numbers "20, 20" are just a sample of the level I made below: tile.Texture returns the sprite, which here is the content item Dirt.png Thank you very much! (I posted this on the main Stackoverflow site, but after several days didn't get a response. Since it has to do mainly with Texture2D, I figured I'd ask here.)

  Read the article

• zlib/libxml2 duplicate package?

  - by Fusion

  I've been updating my amazon ec2 micro instance every month till now. when i try to "yum update" i receive this error : zlib-1.2.5-7.11.amzn1.x86_64 has installed conflicts libxml2 < ('0', '2.7.7', None): libxml2-2.7.6-4.12.amzn1.x86_64 zlib-1.2.5-7.11.amzn1.x86_64 is a duplicate with zlib-1.2.3-27.9.amzn1.x86_64 yum update output: http://pastebin.com/Dfq0yphN I've tried to update separately zlib and libxml2 zlib: same "duplicate" error. libxml2: Transaction Check Error: package libxml2-2.7.8-10.24.amzn1.x86_64 is already installed what can i do?

  Read the article

• "unresolvable problem" error when upgrading from 12.04 to 14.04

  - by flyingfisch

  So I have solved this issue, but now I have another problem: An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. I am not upgrading to a pre-release version of Ubuntu and I am not running a pre-release either. I have unchecked all my 3rd-party packages using Ubuntu Software Manager, EditSoftware Sources... What else might be wrong? UPDATE After doing sudo update-manager -d and sudo apt-get update;sudo apt-get dist-upgrade as per JimB's post, and then running sudo do-release-upgrade, here what I get: Err http://extras.ubuntu.com trusty/main Translation-en Err http://extras.ubuntu.com trusty/main Translation-en_US Err http://extras.ubuntu.com trusty/main Translation-en Ign http://extras.ubuntu.com trusty/main Translation-en_US Ign http://extras.ubuntu.com trusty/main Translation-en Fetched 0 B in 0s (0 B/s) Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done === Command detached from window (Mon Aug 18 23:53:10 2014) === === Command terminated with exit status 1 (Mon Aug 18 23:53:10 2014) ===

  Read the article

• Java : 2D Collision Detection

  - by neko

  I'm been working on 2D rectangle collision for weeks and still cannot get this problem fixed. The problem I'm having is how to adjust a player to obstacles when it collides. I'm referencing this link. The player sometime does not get adjusted to obstacles. Also, it sometimes stuck in obstacle guy after colliding. Here, the player and the obstacle are inheriting super class Sprite I can detect collision between the two rectangles and the point by ; public Point getSpriteCollision(Sprite sprite, double newX, double newY) { // set each rectangle Rectangle spriteRectA = new Rectangle( (int)getPosX(), (int)getPosY(), getWidth(), getHeight()); Rectangle spriteRectB = new Rectangle( (int)sprite.getPosX(), (int)sprite.getPosY(), sprite.getWidth(), sprite.getHeight()); // if a sprite is colliding with the other sprite if (spriteRectA.intersects(spriteRectB)){ System.out.println("Colliding"); return new Point((int)getPosX(), (int)getPosY()); } return null; } and to adjust sprites after a collision: // Update the sprite's conditions public void update() { // only the player is moving for simplicity // collision detection on x-axis (just x-axis collision detection at this moment) double newX = x + vx; // calculate the x-coordinate of sprite move Point sprite = getSpriteCollision(map.getSprite().get(1), newX, y);// collision coordinates (x,y) if (sprite == null) { // if the player is no colliding with obstacle guy x = newX; // move } else { // if collided if (vx > 0) { // if the player was moving from left to right x = (sprite.x - vx); // this works but a bit strange } else if (vx < 0) { x = (sprite.x + vx); // there's something wrong with this too } } vx=0; y+=vy; vy=0; } I think there is something wrong in update() but cannot fix it. Now I only have a collision with the player and an obstacle guy but in future, I'm planning to have more of them and making them all collide with each other. What would be a good way to do it? Thanks in advance.

  Read the article

• Unable to run 'sudo apt-get dist-upgrade' due to authentication issues

  - by TobyG

  I've just attempted to run sudo apt-get dist-upgrade on my Ubuntu box, but am getting the following error... WARNING: The following packages cannot be authenticated! librdbmspp php5-ioncube-loader sw-libboost-date-time1.49.0 sw-libboost-system1.49.0 sw-libboost-filesystem1.49.0 sw-libboost-program-options1.49.0 sw-libboost-regex1.49.0 sw-libboost-serialization1.49.0 sw-libpoco I've tried running... $ sudo apt-key update $ sudo apt-get update ... as found in this question, but I'm still getting the error. Can anyone help, please? Update on 5th June Repos currently in /etc/apt/sources.list (links broken due to reputation being too low to include more than 2 links)… deb http: //gb.archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http: //gb.archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http: //gb.archive.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http: //archive.canonical.com/ubuntu precise partner deb-src http://archive.canonical.com/ubuntu precise partner deb http: //security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb-src http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http: //autoinstall.plesk.com/ubuntu/PSA_11.5.30 precise all deb http: //autoinstall.plesk.com/debian/SITEBUILDER_11.5.10 all all deb http: //autoinstall.plesk.com/debian/BILLING_11.5.30 all all

  Read the article

• JEOS

  - by john.graves(at)oracle.com

  JEOS stands for Just Enough Operating System.  It is  great environment for building virtual machines without all the clutter of a windowing system, games, office products, etc.  It is from Ubuntu and you install it using the Ubuntu server install, but rather than picking a standard install, press F4 and choose “Install a minimal system.” Note: The “Install a minimal virtual machine” is specific to VMWare and I plan to use VirtualBox. Be sure to include Open SSH in the install so that it installs sshd. *** Also, if you plan to install XE, you’ll need to modify the partitions to have a larger swap space (at least 1.5 G). *** Once the install is done, I find it useful to install a few other items. Update Ubuntu apt-get update Install some other tools apt-get openjdk-6-jre Yes, java will be included in any of the WebLogic installs, but I need this one if I want to do remote display (for config wizards, etc). apt-get gcc Some apps require to rebuild the kernel modules, so you’ll need a basic compiler. Install guest additions (Choose the VirtualBox Devices->Install Guest Additions…” option.  This sets up a /dev/cdrom or /dev/cdrom1.  You’ll need to manually mount this temporarily: sudo mount /dev/cdrom /mnt Then run the linux .bin file. Update nofile limits.  Most java apps fail with the standard ubuntu settings: edit /etc/security/limits.conf and add these lines at the end: *     soft nofile 65535 *     hard nofile 65535 root  soft nofile 65535 root  hard nofile 65535 These numbers are very high and I wouldn’t do this on a production system, but for this environment it is fin. To get rid of the annoying piix error on boot, add the following line to the /etc/modprobe.d/blacklist.conf file blacklist i2c_piix4

  Read the article

• Updating sprite location with controls

  - by iQue

  So ive got a character in a 2D game using surfaceView that I want to be able to move using a button(eventually a joystick), but my game crashes as soon as I try to move my sprite. This is my onTouch-method for my steering button: public void handleActionDown(int eventX, int eventY) { if (eventX >= (x - bitmap.getWidth() / 2) && (eventX <= (x + bitmap.getWidth()/2))) { if (eventY >= (y - bitmap.getHeight() / 2) && (y <= (y + bitmap.getHeight() / 2))) { setTouched(true); } else { setTouched(false); } } else { setTouched(false); } and if I try to put this in my update-method: public void update() { x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } the sprite moves on its own just fine, but as soon as I add: public void update() { if(steering.isTouched()){ x += (speed.getXv() * speed.getxDirection()); y += (speed.getYv() * speed.getyDirection()); } the game crashes. Does any1 know why this is or how to fix it? I cannot figure it out. Im using MotionEvent.ACTION_DOWN to check if the user if pressing the screen. }

  Read the article

• Java Deployment with automatic updates (without user confirmation)

  - by Svanste

  Here in our company our users use 1 Java application which is updated every monday and always needs the latest java update. We install Java on Clients through SCCM 2012 R2. I already know how to this, the only thing i can't figure out is how to automatically update Java on computers. This has to be silent, so we don't want users to get a pop up asking if they want to install the latest the Java update. We want Java to autoupdate when users logon on monday morning, with no possibility to cancel it. (At least no obvious way to cancel it, so no cancel button or anything basic) Been searching on google for a while now but most scenario's involve NOT wanting autoupdate.

  Read the article

• Tips on how to notify a user of new features in your game

  - by brent777

  I have noticed a problem when releasing new features for a game that I wrote for Android and published on Google Play Store. Because my game is "stage-based" - and not a game like Hay Day, for example, where users will just go into the game every day since it can't really be finished - my users are not aware of new features that I release for the game. For example, if I publish a new version of my game and it contains a couple new stages, most of their devices will just auto-update the game and they don't even notice this and think to check out what's new. So this is why an approach like popping open a dialog that showcases the new feature(s) when they open the game for the first time after the update was done is not really sufficient. I am looking for some tips on an approach that will draw my users back into the game and then they could read more detail about new features on such a dialog. I was thinking of something like a notification that tells them to check out the new features after an update is done but I am not sure if this is a good idea. Any suggestions to help me solve this problem would be awesome.

  Read the article

• How to Find Out What Version of Display Driver is Installed

  - by Artium

  One of my favorite games, "Wolfenstein Enemy Territory", has stopped working lately. It throws a segfault during the initialization phase. I suspect that the reason is a recent update to the video card driver. The problem started after I updated Ubuntu but I do not remember if there was a driver update in the list. My question is how can I check this. How can I view the current version of the display driver installed and the date it was last updated? If I discover that this is indeed the problem, will it be possible to revert the update and stay with the previous version of the driver?

  Read the article

• CentOS 6.5 server time zone won't persist?

  - by Codemonkey

  I'm setting my timezone like so: ln -sf /usr/share/zoneinfo/Europe/London /etc/localtime It works fine, I check with date and all is good. But then a few days later I'll realise it's reset itself to CEST, so 9am becomes 10am, etc. The server is located in Paris, in the CEST time zone. But I should be able to use any zone I want, surely? I (and most of my users) am based in the UK, so I want to operate on that timezone. I just did a yum update and noticed it wanted to update tzdata. That had the effect of changing from BST to CEST, but I don't think it's the only thing that triggers the change, as I'm sure it's gone wrong on days where I've done no such update. I could be wrong though. What's the trick to set a timezone permanently? Thanks

  Read the article

• NHibernate Pitfalls: Cascades

  - by Ricardo Peres

  This is part of a series of posts about NHibernate Pitfalls. See the entire collection here. For entities that have associations – one-to-one, one-to-many, many-to-one or many-to-many –, NHibernate needs to know what to do with their related entities, in three particular moments: when saving, updating or deleting. In particular, there are two possible behaviors: either ignore these related entities or cascade changes to them. NHibernate allows setting the cascade behavior for each association, and the default behavior is not to cascade (ignore). The possible cascade options are: None Ignore, this is the default Save-Update If the entity is being saved or updated, also save any related entities that are either not saved or have been modified and associate these related entities to the root entity. Generally safe Delete If the entity is being deleted, also delete the related entities. This is only useful for parent-child relations Delete-Orphan Identical to Delete, with the addition that if once related entity is removed from the association – orphaned –, also delete it. Also only for parent-child All Combination of Save-Update and Delete, usually that’s what we want (for parent-child relations, of course) All-Delete-Orphan Same as All plus delete any related entities who lose their relationship In summary, Save-Update is generally what you want in most cases. As for the Delete variations, they should only be used if the related entities depend on the root entity (parent-child), so that deleting the root entity and not their related entities would result in a constraint violation on the database.

  Read the article

• Problem with missing JSON functions on PHP 5.2.6 / Plesk 8.4

  - by Drachenviech

  I have a vserver running openSuse 10.3, Apache 2 and Plesk 8.4. I can update/upgrade neither, as it is apparently not recommended to upgrade openSuse 10.3 (and an update to the EOL 10.4 does not seem to make much sense) and Plesk fails to update no matter what version I try (even fails to upgrade to 8.4.1). Still I can live with that somehow, primarily because I don’t have the time to do a fresh remote install on the vserver. What really is a problem is, that though the installed PHP is 5.2.6 it has no zip library and no json functions. The first is probably because PHP was not compiled with --enable-zip. The second is a big mystery though. As I understand it, it always comes with PHP unless its compiled with the --disable-json configure option. This is however not the case. And the json extension module is just not there. I even tried to enable it with extension=json.so with no luck either. the configure options of my PHP are (as shipped with Plesk 8.4) '../configure' '--prefix=/usr' '--datadir=/usr/share/php5' '--mandir=/usr/share/man' '--bindir=/usr/bin' '--with-libdir=lib' '--includedir=/usr/include' '--sysconfdir=/etc/php5/apache2' '--with-config-file-path=/etc/php5/apache2' '--with-config-file-scan-dir=/etc/php5/conf.d' '--enable-libxml' '--enable-session' '--with-mm' '--with-pcre-regex=/usr' '--enable-xml' '--enable-simplexml' '--enable-spl' '--enable-filter' '--disable-debug' '--enable-inline-optimization' '--disable-rpath' '--disable-static' '--enable-shared' '--program-suffix=5' '--with-pic' '--with-gnu-ld' '--with-system-tzdata=/usr/share/zoneinfo' '--with-apxs2=/usr/sbin/apxs2' '--disable-all' '--disable-cli' As I understand it, PECL is not an option with 5.2.6. Or am I mistaken? Even if I was not, the openSuse repository only goes as far as PHP 5.2.4. The openSuse install even came without zypper, which I had to manually install. So is there a way to get ziplib and json running in PHP 5.2.6 without having to recompile the binary?

  Read the article

• Memory allocation strategy for the vertex buffers (DirectX 10/11)

  - by Alex

  I have the following question. I write CAD system. So I have a 3D scene and there are many different objects (walls, doors, windows and so on). User can add or delete some objects. The question is: how can I organise the keeping of vertices for all my objects. I can create vertex buffer for every object. But I think drawing/switching from one buffer to another would have performance penalty. Another way - I can create several big buffers for every object type. But I don't understand how to update such buffers. It is too big to update whole buffer (for example buffer for all walls). What I need to do if I want to delete the object from the middle of the buffer? Actually I have the similar question: http://stackoverflow.com/questions/5515700/how-to-properly-update-vertex-buffers-in-directx-10 Most examples I've found work with very static models. Therefore, they tend to create a single vertex buffer with their list of points, and then are just manipulated by matrix transformations. I, on the other hand, will be updating the scene very often.

  Read the article

• Kill .so file process

  - by demonofnight

  I have a program, I cannot change the code. It calls some .so file's function, but don't delete the object in the end. When the owner of the program tries to update the program he kills it and send the update, but the .so file is in use so he can't update the file. It's on an AIX platform. Is it possible to force to kill the .so file? If I do a fuser -f on the file it returns nothing. Can I create another program to kill the program, is there any command to do that?

  Read the article

• Oracle Solaris 11 How To Guides

  - by glynn

  Over the past year or so I've been writing a lot of How To Guides for different technologies. While we have really excellent product documentation (including the best set of manual pages available on any UNIX or Linux platform), the various How To Guides we have help to complement some of that learning, giving administrators a chance to learn the motivations for different technologies with a simple set of examples. Not only are they fun to research and write, they're also one of the more popular items on our Oracle Solaris 11 technology pages on OTN. So here's a link to bookmark and come back to on a regular basis: Oracle Solaris 11 How To Guides. We've got an excellent line up of articles there, and below is a list of the ones I've been involved in writing. Let us know if there are technologies that you think a How To Guide would help with and we'd be happy to get them onto our list! TitleLink Taking your First Steps with Oracle Solaris 11An introduction to installing Oracle Solaris 11, including the steps for installing new software and administering other system configuration. Introducing the basics of IPS on Oracle Solaris 11How to administer an Oracle Solaris 11 system using IPS, including how to deal with software package repositories, install and uninstall packages, and update systems. Advanced administration with IPS on Oracle Solaris 11Take a deeper look at advanced IPS to learn how to determine package dependencies, explore manifests, perform advanced searches, and analyze the state of your system. How to create and publish packages with IPS on Oracle Solaris 11How to create new software packages for Oracle Solaris 11 and publish them to a network package repository. How to update your Oracle Solaris 11 systems using Support Repository UpdatesThe steps for updating an Oracle Solaris 11 system with software packages provided by an active Oracle support agreement, plus how to ensure the update is successful and safe. Introducing the basics of SMF on Oracle Solaris 11Simple examples of administering services on Oracle Solaris 11 with the Service Management Facility. Advanced administration with SMF on Oracle Solaris 11Advanced administrative tasks with SMF, including an introduction to service manifests, understanding layering within the SMF configuration repository, and how best to apply configuration to a system.

  Read the article

• How to Enable Priority Inbox on Android (and Setup Important-Only Notifications)

  - by The Geek

  Yesterday Google released an updated Gmail application for Android 2.2 phones that supports the Priority Inbox feature—and more importantly, allows you to change your notifications to only alert you for important email. Let’s take a look. Note: If you’ve never used Priority Inbox, you should really give it a try—it rearranges your email into what is and isn’t important, and you can customize how it classifies messages easily. The idea is that it learns over time, so if you send a lot of emails back and forth with somebody, it will know that they are probably important—you can manually adjust the settings as well. To update the Gmail application, you’ll want to head into the Market and access Menu –> Downloads, where you should see Gmail in the list, and it should let you update from there. If you don’t see an update, you’re either not running Android 2.2, or it has already updated automatically Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

  Read the article

• Updating windows xp hard drive controller from ubuntu live disk

  - by Joel

  The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

  Read the article

• The clock problem - to if or not to if?

  - by trejder

  Let's say, we have a simple digital clock. To "power" it, we use a routine executed every second. We update seconds part in it. But, what about minutes and hours part? What is better / more professional / offers better performance: Ignore all checking and update hour, minute and seconds part each time, every second. Use if + a variable for checking, if 60 (or 3600) seconds passed and update minute / hour part only at that precise moments. This leads us to a question, what is better -- unnecessary drawings (first approach) or extra ifs? I've just spotted a Javascript digital clock, one of millions similar on one of billions pages. And I noticed that all three parts (hours, minutes and seconds) are updated every second, though first changes its value only once per 3600 seconds and second once per 60 seconds. I'm not to experienced developer, so I might me wrong. But everything, what I've learnt up until now, tells me, that if are far better then executing drawing / refreshing sequences only to draw the same content.

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >