Search Results

Search found 16808 results on 673 pages for 'computer guru'.

Page 251/673 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• Sending microphone input over Remote Desktop 7.0

  - by Taylor Price

  I am using Remote Desktop 7 (the new version that came out with Windows 7) to control a Windows XP Pro machine. I have selected "Record from this computer" in the Remote Audio settings. When I connect to the machine, go to the control panel, open the sound panel, and go to the audio tab, I find that the default sound playback device is "Microsoft RDP Audio Driver". However, there is no default sound recording device. As expected, my IP phone thinks there is no recording device. If I am sitting in front of the computer with a mic plugged in, it works just fine. Has anybody else been able to get this work appropriately? Is there anything that I have to setup on the XP machine to get this working? Thanks in advance. Edit: As John T pointed out below, you have to be connecting to a Windows 7 Enterprise or Ultimate machine for this to work. I've also found out that Multi-monitor support has the same requirement.

  Read the article

• Problem running Apache-Tomcat on every web browser installed in Windows 7

  - by Kush

  Hello everyone, I'm working on a web application in JSP and my web container is Apache Tomcat 7.0.2 (Its portable cross-platform version). As I've made extensive use of HTML5-CSS3 and my target browser is Google Chrome, I'm able to run the the Apache server only in Opera web browser, neither of the remaining installed browser run it. Here's the steps I have followed to start the server in my Windows 7 machine. -Placing the 'apache-tomcat-7.0.2' directory on my root partition (i.e. C: Drive) -Execute 'startup.bat' from 'bin' directory in it. (startup.sh if on Linux/Unix). -Then, a Console window opens that shows log during the setup of server (separately from Command Prompt), and I need to keep that console running in order to keep the Apache server running, so I minimize it. -Then, I open 'http://localhost:8080/' in various web browsers, and I could see Apache Server Homepage with same address only in Opera Web Browser (11.01), neither of other browsers installed can open it (Chrome 9, Firefox 4 Beta 10 or IE8). -I also tried other port numbers, but none of them worked. What can I do to make Apache run in every browser installed in my computer? I have my computer dual boot with Windows 7 and Ubuntu 10.10, and in Ubuntu, every web browser installed can run Apache once I start it, but same is not working in Windows.

  Read the article

• "No more threads can be created in the system" in Network and Sharing Center

  - by Zell Faze

  A while back I noticed on one of our laboratory computers (Windows 7, very little extra software installed) that the network connection icon in the system tray would claim that it had no network connection, even though it did. This issue would go away after the computer was rebooted, but would surface again the next time I looked at the computer (a few days later). Upon opening the Network and Sharing Center I am shown an actual error message, but not one that seems to give me a lot of information about what the problem is. In the place of the usual information about network adapters and whether you are connected to the Internet it simply says: "No more threads can be created in the system." The Event Viewer shows hundreds of events from different services also with the same message. "Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x800700a4, No more threads can be created in the system."; "The WinHTTP Web Proxy Auto-Discovery Service service failed to start due to the following error: A thread could not be created for the service."; "The IP Helper service terminated with the following error: No more threads can be created in the system." As far as I can tell, this message seems to mean that there is some sort of resource leak in Windows where something is creating a large number of threads and those threads are not being killed off? I've tried restarting WMI and several services related to networking, without avail. Can anyone provide more information on what "No more threads can be created in the system" might mean and what I might be able to do to fix the issue? Currently the only solution appears to be restarting.

  Read the article

• Lync CMS replication is failing for all Domain Computers

  - by Ravi Kanneganti

  I have Lync Server 2010 and Active Directory installed on 2 different Windows Server 2008 R2 machines. I have added a Windows 7 PC to AD. And I have added this computer to Trusted Application Servers Pool and published the topology. I want to build an UCMA application to extend Lync Server functionality. I have installed UCMA 3.0 SDK in the same computer where Lync Server is residing. But, CMS Replication isn't happening and "Get-CsManagementStoreReplicationStatus" always gives Uptodate as "False" for my Windows 7 PC. I have even tried "Invoke-CSManagementStoreReplication" but nothing changed. Also, this is the error message that I can see in the log file: TL_WARN(TF_COMPONENT) [2]0500.07B8::04/05/2012-14:55:07.296.00000f85 (XDS_Replica_Replicator,FileDistributeTask.Execute:filedistributetask.cs(165))(000000000043B3FA)**Could not distribute the file. Exception: [System.IO.IOException: The process cannot access the file because it is being used by another process.** at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.Move(String sourceFileName, String destFileName) at Microsoft.Rtc.Xds.Replication.Replicator.Common.FileDistributeTask.Execute()]. TL_NOISE(TF_DIAG) [2]0500.07B8::04/05/2012-14:55:07.296.00000f86 (XDS_Replica_Replicator,ReplicaTaskContainer<T>.OnError:replicataskcontainer.cs(166))(00000000005C39D4)Enter. TL_INFO(TF_COMPONENT) [2]0500.07B8::04/05/2012-14:55:07.296.00000f87 (XDS_Replica_Replicator,ReplicaTaskContainer<T>.OnError:replicataskcontainer.cs(171))(00000000005C39D4)Task error callback is about to be called. TL_VERBOSE(TF_DIAG) [2]0500.07B8::04/05/2012-14:55:07.296.00000f88 (XDS_Replica_Replicator,PerReplicaTaskManager<T>.HandleTaskError:perreplicataskmanager.cs(230))(000000000385E79C)Enter. TL_INFO(TF_COMPONENT) [2]0500.07B8::04/05/2012-14:55:07.296.00000f89 (XDS_Replica_Replicator,PerReplicaTaskManager<T>.HandleTaskError:perreplicataskmanager.cs(234))(000000000385E79C)Task encountered an error: [ReplicaTaskContainer<FileDistributeTask>{FileDistributeTask{E:\RtcReplicaRoot\xds-replica\from-master\data.zip, E:\RtcReplicaRoot\xds-replica\working\replication\from-master\data.zip, **Access failed**. (E:\RtcReplicaRoot\xds-replica\from-master\data.zip)}, FileDistributeTask{E:\RtcReplicaRoot\xds-replica\from-master\data.zip, E:\RtcReplicaRoot\xds-replica\working\replication\from-master\data.zip, }}]

  Read the article

• The boot selection failed because a required device is inaccessible 0xc000000e

  - by bbodenmiller

  A family member of mine recently went on vacation and turned off their computer, something they normally do not do, upon returning home it would not turn on and now returns the error message below. Generally friends and family come to me for help with computers and I have no problem, however this time I am a bit stumped. Any suggestions would be greatly appreciated. As you can see the error message is: Status: 0xc000000e Info: The best selection failed because a required device is inaccessible. Before going to this error message it briefly flashes the Windows loading screen. I have been able to confirm through the Windows RE Command Line and the dir command that the C: drive is accessible and likely is just suffering a bootup issue. I have tried: Launching the repair process discussed in the error message three times however each time it requires a restart and then returns to the same error message. Changing the boot order to be hard drive first Getting into safe mode; F8 just results in the same error message before I can get to the menu to select safe mode I have checked to make sure the BCD (bcdedit, Boot Configuration Data) is still intact as per https://www.symantec.com/business/support/index?page=content&id=TECH160475 I plan to try (but would like additional comments on): sfc /scannow; requires a restart and thus will likely result in the error message again A memory scan Bootrec as per http://support.microsoft.com/kb/927392#method1 Swapping IDE cables/ports Resetting the BIOS I noticed others with similar issues around the web are dual-booting however this machine is not setup in a dual-boot environment. Additionally at one point this error message supposedly showed up before I started working on the computer: The instruction at 0xfbe2584d referenced memory at 0x00000008. The memory could not be read. As previously stated any additional suggestions or words of advice would be greatly apprecaited.

  Read the article

• IIS 6.0 Application pool crash

  - by David

  One application pool on one of our webservers crashed and we found this in the Eventlog, where can we find more information about it? Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1101 Date: 11/23/2009 Time: 10:57:55 AM User: N/A Computer: ID-WEB Description: The World Wide Web Publishing Service failed to create app pool 'Global'. The data field contains the error number. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: b7 00 07 80 ·..? Attempting to manually start the application pool gives the following in the event log: Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1107 Date: 11/23/2009 Time: 3:53:13 PM User: N/A Computer: ID-WEB Description: The World Wide Web Publishing Service failed to modify app pool 'Global'. The data field contains the error number. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 05 40 00 80 .@.? We are running IIS 6.0 on a Windows server 2003 R2, 32bits.

  Read the article

• Vista Power Management GPO

  - by Matt

  Hi, I've created a loopback GPO that has several settings (both computer and user) including a Custom User Interface (Access 2007 Application) and Power Management (has the computer sleep after being idle for 2 min). I'm also filtering so that this policy does not apply to "Admins" - only to "Users". The problem I'm having is when the "Users" login the Power Management settings don’t work, but they do for "Admins". For testing I'm allowing the "Users" to launch Task Manager and use the Run line, so I'll run Explorer and look at Power Management and it shows the settings from my GPO. So I created a test OU with copies of the aforementioned GPO, but removed the Custom User Interface and found the Power Management settings do work for both the "Users" and "Admins". When I add the Custom UI the Power Management settings break for the "User" but continue to work for "Admins". Do the Power Management options need to have User Interface be "Explorer.exe"? Is this a bug or am I doing this the wrong way? BTW the tablets are using Vista SP2. Any insight or advice would be greatly appreciated. Thanks, Matt

  Read the article

• OSX esc key stops working (randomly)

  - by Jan Hancic

  I have a 2011 macbook Air with OS X Mountain Lion (I've upgraded from Lion). And ever since upgrading my escape key randomly stops working. And it's not that the keyboard on the laptop would be damaged as the same happens if I use apple's bluetooth keyboard. So I'm guessing it's a software issue. Also in some cases pressing ctrl+esc achieves the same thing as just esc so I'm 100% it's not a hardware problem. Does anybody have any idea what this might be all about and how to fix it? edit: the escape key stops working completely but it starts working again after I restart the computer. edit2: this usually happens after the computer wakes from sleep. So it's not like that is just stopps working in the middle of using it, but rather after I put it to sleep (or just close the lid) and then open it again. Has nobody got the same issue? Is there a better place to ask OSX related questions than SuperUser maybe?

  Read the article

• CHKDSK: What option DOES NOT delete files and turn them into .chk files?

  - by CHKDSKuser

  I had a recent power outage while using my computer, with a 1TB hard drive being directly accessed as the power went out. When the power came back on, and I rebooted my computer, one of my 1TB hard drives would not register with WinXP SP3, and showed a Total Space of 0, and an Available Space of 0. The file system (NTFS) also did not register...every entry for the drive was either blank or zeroed. My assumption is that the file tables were damaged/corrupted because the drive was being directly accessed when the power went out. After doing some research, I ran CHKDSK with whatever default options it runs with (I'm not sure what they are as I didn't see them displayed). Upon completion of CHKDSK, the drive registered with WinXP as a 1TB hard drive, with an accurately-reflected amount of available space. But CHKDSK also deleted about 16GB of files from their original directories, and changed them all into sequentially-named *.chk files. My question is how can CHKDSK be run in a situation like mine where the file tables needed to be restored, but without having CHKDSK delete any files from their original directories, even if they may be damaged/corrupt? I'd simply like to be able to run CHKDSK and have it restore the file tables, and repair bad sector damage, as it did, but not have it do anything else such as delete files and convert them to CHK files. Any ideas? Or is there a CHKDSK alternative that can perform the same functions without the file deletions?

  Read the article

• Time machine disk icon on boot disk

  - by Ben Lings

  The icon for Macintosh HD (my boot disk) shows as a Time Machine disk. There is a file .com.apple.timemachine.supported in the root of the disk. If I delete the file and restart the computer, the icon goes back to a normal HD icon. However, the .com.apple.timemachine.supported file is recreated at some point on boot because when I log in again, the file has been recreated. If then reboot again, the icon goes back to being a Time Machine one. Any ideas about what is creating this file and why? More importantly - how can I get it to stop? It looks like something thinks the boot disk should be a Time Machine volume, but what? Console.app shows the following messages at approximately hourly intervals: 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Starting standard backup 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Cookie file is not readable or does not exist at path: /.<12 hex digits of MAC address for en0> 19/01/2010 19:23:54 /System/Library/CoreServices/backupd[7459] Volume at path / does not appear to be the correct backup volume for this computer. (Cookies do not match) 19/01/2010 19:23:59 /System/Library/CoreServices/backupd[7459] Backup failed with error: 18 Other possibly relevant information: The boot HD isn't the original - the original failed so this is a SuperDuper'd clone of the original drive. I used to use the same disk for a SuperDuper clone as for Time Machine. These are the same same symptoms as this and this.

  Read the article

• How to easily input and display isolated japanese radicals on MacOS X?

  - by ogerard

  (This question was considered as off-topic on Japanese.SE and more suitable for SuperUser). I like to write computer notes about what I learn in Japanese. From time to time, I would like to be able to include in my text a given radical, say kokoro ?, which takes several graphic forms when used as an element in a more complex kanji, for instance . I did not succeed on my system (Mac OS X 10.7) to find the glyphs for these variants conveniently and exactly as I would like them (I would also be interested about how to do this on Windows 7 or Linux). I first tried the name of the kanji from which the radical is derived. Then I tried to use the japanese name for them, such as risshinben (as in ?) and shitagokoro (as in ?), hoping that the hiragana or katakana input would recognize them and propose me their representation, but it did not work. So I looked into the Full Japanese Character Table, under the "by radical" tab, and found at least a version of each of them : ? (CJK 5FC4) and ? (CJK 38FA) with the correct kun readings. I have them now as favorites but do I need to do that for all radicals? Do I need to register all of them in a user dictionary? I would imagine that I am not the only one who wants to do use them. Besides, the versions I have found are not suited for all occasions: they are centered on a standard kanji square. If I want them to appear near to a placeholder, or demonstrate their proportion to the rest of a typical kanji, I have to make complicated adjustments, depending on my use and the kind of radical. More generally are there computer tools for japanese dictionary editors and japanese teachers I could use on Mac OS X? (I could not add relevant tags such as : japanese or ideogram, please feel free to edit)

  Read the article

• How to repair multiple KDC an Netlogon errors

  - by Keith Sirmons

  Howdy, I have several erros in the system event log of my single Windows 2003 SP2 domain controller. Multiple member computers on the domain are listed in these errors. I am seeing two similar errors for each computer one second apart in the event log. Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was [email protected] and lookup type 0x8. followed by Event ID 7 Source KDC The Security Account Manager failed a KDC request in an unexpected way. The error is in the data field. The account name was MEMBERNAME$ and lookup type 0x8. The Lookup Types are also different, I have 0x8, 0x28, 0x0, 0x20. I am also receiving other authentication errors in the same time frame as all of the KDC errors Event ID 5722 Source NETLOGON The session setup from the computer MEMBERNAME failed to authenticate. The name(s) of the account(s) referenced in the security database is MEMBERNAME$. The following error occurred: Access is denied. I have run dcdiag /v to see if there was something wrong with Active Directory, but all tests passed. I also ran netdiag /v and it appers all of those tests ran. Any ideas on where to start for this issue? Thank you, Keith

  Read the article

• Laptop Asus P50IJ with Intel 4500M GMA output going to a Dell 1907FP external monitor will not allow

  - by ProfessionalAmateur

  Hello - I just purchased an Asus P50IJ-X2 laptop which has a Intel GMA 4500M video card running Windows7. At work I output this laptop to a Dell 1907FP LCD which has a maximum resolution of 1280x1024. Not matter what I do the Windows will not allow the laptop to set a resolution higher than 1024x768 to this LCD monitor. Ive even gone to the extent of downloading PowerStrip (I'd post a link but Im new and can only enter 1 url, if you google for powerstrip its the first option) to create a custom driver for my monitor thinking Windows was having a hard time seeing the available resolutions it would accept. However, powerstrip read the registery and properly sees the monitor and what its capable of so Im now at a complete loss as to why Windows7 will not allow me to set/use a 1280x1024 resolution for this external monitor (as my last laptop did running Vista). The Intel documentation (http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/) indicates that the GMA 4500M should be able to run up to a 2560x1600 max res. The Dell 1907FP specification states it can run up to a 1280x1024 res. But no matter what the computer will not allow me to set higher than a 1024x768. I'm completely baffled but I would really like to be able to output this laptop to a reasonable resolution, 1024x768 makes me feel like I'm using my mom's computer. Any help would be greatly appreciated! Here are some attached images (I apologize for the links, being new I cannot post images) that should help explain this better: Image 1 - This image is from powerstrip which shows the monitors max accepted resolution and at the top right the max res my PC currently allows. (http://imgur.com/agrno.png) Image 2 - This shows my Windows7 resolution picker. (http://imgur.com/3nv6q.png) Image 3 - The 'List all modes' option taken from the Screen Resolution Advanced Settings List All Modes. (http://imgur.com/AMREh.png) Image 4 - Monitor information from registry read by powerstrip, this shows the laptop is able to read the necessary info from the LCD monitor. (http://imgur.com/hUX4D.png)

  Read the article

• Reverse ssh tunneling with Tomato

  - by Deivuh

  Since my ISP restricts some incoming connections, I can't access remotely to my home pc. What I'm trying to do is make a reverse ssh connection from my home's router with Tomato firmware to the office computer, so I can access remotely from the office with that open connection. What I'm doing is running the following from the router: ssh -R 12345:localhost:22 oUser@office Then I leave run top open to keep the connection alive. And from my office what I do is run the following: ssh hUser@localhost -p 12345 but I get the following message with verbose on: OpenSSH_5.5p1 Debian-6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [::1] port 19999. debug1: Connection established. debug1: identity file /home/oUser/.ssh/id_rsa type -1 debug1: identity file /home/oUer/.ssh/id_rsa-cert type -1 debug1: identity file /home/oUser/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: identity file /home/oUser/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host I've password remote access enabled in Tomato's configuration, so I should be able to access without having the public key on *authorized_keys*, but I've even tried adding it and still the same. I've done the same with my home's computer, and it does work perfectly, but it doesn't with the router. Am I doing something wrong? Thanks in advance.

  Read the article

• How can I use Linksys WPSM54G print server as a bridge for another machine AND also share the printe

  - by user26453

  I have a Linksys WPMS54G currently sharing a printer via the USB port with the rest of my network via the wireless. Is there any way to set it up so that the ethernet port is bridged over the wireless adapter portion? i.e., be able to uplink another machine or switch into the network via the WPMS54G's ethernet port? Update: The network architecture is as follows: (1) Linksys WRT54G router that serves as a router, DHCP server, and wireless access point for the network. Fairly standard configuration (3) Laptops that are used throughout the house via wifi (1) Linksys WPSM54G printer server that connects via wireless to the router, in a separate room with a printer attached to print seerver's USB port along with (1) Un-networked desktop in the same room Since the printer is plugged into the USB port of the WPSM54G, I am wondering if I can connect the desktop to the ethernet port of the WPSM54G and have it bridged over the wifi to the router. The twist here is that the ethernet is initially used to connect the wireless print server to the router (for configuration, can't configure it wirelessly if you are initially on a encrypted network). Now instead of using that ethernet port as a way to connect the print server to the network (via the router), I want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer (attached via USB) through the print server. If this is not clear, please comment. To be clear, the computer I want to connect/bridge into the network does not have a wireless card, is far from the router, and I do not want to lay ethernet cable to connect it. While I could certainly buy a legitimate wireless bridge to accomplish this, I figured since the print server already has an ethernet port, see if I can't use that.

  Read the article

• Asus P5Q doesn't post at all

  - by Sebi

  I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

  Read the article

• What is causing random hard freezes on my system? Kaspersky?

  - by Christian Ivicevic

  The last few weeks I experienced a new strange behavior of my computer. Sometimes Windows 7 just freezes with no real reason at all. While listening to music for example the playback hangs and you can hear a very nasty sound. Neither mouse nor keyboard input is handled and everything is just stuck. Using Ubuntu this does not happen, so I think it is just a matter of driver issues or a Windows 7 bug. Furthermore I am really suspicious about Kaspersky (Internet Security 11) and so I let it perform a complete virus scan while no other app is running. At about 50% it happened again and I needed to restart the computer by holding the power button the bad way... A really weird thing is that playing Skyrim this happened once, however music playback did not stop. Only the framerate dropped to 0 and sometimes for a few seconds I am able to move. Therefore I am really confused as furthermore no bluescreen pops up. Memtest told me that everything seems to be alright... Can anyone explain me which data you need about my hardware and software (and which tools tools to use to gather the informatik) to be able to provide any help on my problem?

  Read the article

• Printer sharing problem (win7 / WinXP): Canon pixma USB printer

  - by Rabarberski

  For a friend, I am trying to share a USB Canon pixma ip3000 printer between two computers in his home network. But I can't get it to work due tot a Canon driver problem. The printer is connected to the Windows 7 (64 bit) computer, and we would like to be able to print from a Windows XP computer. 'Normally' it should be no problem to use Windows printer sharing, however, because one machine is 32-bit and the other is 64-bit, installing an extra driver is required. T he driver provided by canon (here) is described as a 'Canon Inkjet Printer Driver Add-On Module'. The problem is that the .inf file contained in the .exe file isn't accepted as a driver when prompted by the Printer Sharing Wizard, I suspect because it is an add-on driver (whatever that may be). I've connected and installed the printer locally on the XP machine first (which works), so that the XP machine would already know the driver when using it as a network printer, but that doesn't work; the wizard still wants a driver file. Anybody suggestions how to get this working? Maybe there is some sort of generic driver (would be OK even with limited functionality)?

  Read the article

• Drive XML returning Windows Volume Shadow Service Error

  - by Ssvarc

  I'm trying to image a SATA laptop hard drive, using DriveImageXML, that is attached to my computer via a USB adapter. I'm running Win7 Ultimate 64 bit. DriveXML is returning: Could not initialize Windows Volume Shadow Service (VSS). ERROR C:\Program Files (x86)\Runtime Software\Drivelmage XML\vss64.exe failed to start. ERROR TIMEOUT Make sure VSSVC.EXE is running in your task manager. Click Help for more information. VSSVC.EXE is running in Task Manager, as is VSS64.exe. Looking at the FAQ on the Runtime webpage this turned up: Please verify in Settings-Control Panel-Administrative Tools-Services that the following services are enabled: MS Software Shadow Copy Provider Volume Shadow Copy Also make sure you are able to stop and start these services. Possible reasons for VSS failures: For VSS to work, at least one volume in your computer must be NTFS. If you use only FAT drives, VSS will not function. The required NTFS volume does not need to be identical with the volume you want to image. You should make sure that VSSVC.EXE is running in your task manager. If the problems persist, registering "oleaut.dll" and "oleaut32.dll" using "regsvr32" might help. Both of those services are running and can be started and stopped without issue. Using "regsvr32" to register ""oleaut32.dll" returns successful, but "oleaut.dll" returns: The module "oleaut.dll" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Some other information that might be relevant. Browsing to the drive is successful, but accessing certain folders returns an "access" error. Windows runs a permissions adder that adds the current user profile to the NFTS permissions. Could this be the cause of the issue? DriveImage XML is running as Administrator. Thoughts?

  Read the article

• ubuntu 9.04 pptp broken after a power failure

  - by kevin42

  I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

  Read the article

• How to get decent WiFi despite a virtual Faraday cage

  - by MT_Head

  One of my clients is the local branch of an international airline. They have a small office in the secured area behind the ticket counters, and timeshare space at the ticket counter. I need to add a ticket printer out front, which I cannot (for contract/liability reasons) attach to the shared computer at the counter; the only workable solution seems to be to put the printer and its attached computer on a cart and connect to the office's network via WiFi. So far, no problem - right? Well, the terminal has been getting a facelift, which - among other things - includes decorative stainless-steel panels along the wall behind the ticket counters. This paneling acts as a seriously effective barrier to WiFi! The office's WiFi router - a brand-new D-Link DIR-815, dual-band 802.11n - is just on the other side of the pictured wall, and twenty feet or so to the right. And yet the only way I can connect AT ALL on this side of the wall is to stick the USB adapter (on the end of an extension cable) right into the crack between panels... and even then I can only see the 5GHz network, and that very weakly. Has anyone else had experience with this sort of misguided interior decoration? Any ideas on how I can improve reception on the other side of the barrier? (Needless to say, physical modifications of the environment - tempting though they might be - are strictly no-go.)

  Read the article

• Error 720 on VPN (PPTP) attempt

  - by Andy Shulman

  When I attempt to connect to a server running XP x64 (so essentially Server 2003) using a PPTP connection, it fails with client-side error Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this configuration. and server-side error Event ID: 20050 The user WINSERV3\Andy connected to port VPN8-1 has been disconnected because no network protocols were successfully negotiated. I have configured the router to pass both TCP packets on 1723 and GRE packets. I have used Wireshark (filtering out ARP, UDP, and all TCP ports other than 1723) to observe the packets received by the server. Wireshark does not explicitly name any protocol GRE, but it does tell me the server sent and received TCP, PPTP, PPP LCP, PPP CHAP, PPP CBCP, and PPP IPCP. The connection seems to go wrong at packet 30, where the protocol is PPP LCP, with the payload of the packet being labeled "Protocol Reject". Obviously, this is going from server to client. This would seem to lead to the conclusion that there is something wrong with my client, which runs Windows 7 Ultimate x64. However, it is able to connect to my house's router, which runs the DD-WRT firmware and is thus a PPTP endpoint. I'm thoroughly at a loss. Please help!

  Read the article

• How do I get more information on a potential network freeloader?

  - by Dov

  I have a home network set up, complete with a relatively good password. I'm in Mac OS X 10.6 (Snow Leopard) and have been noticing, on occasion, a computer showing up in my Finder's Shared section, that is not one of my own (the "pe-xpjalle" box pictured below). He has a tendency to come and go. How can I figure out his MAC address or something, so I can block him? I checked my "Logs and Statistics" in the Airport Utility, and didn't see that computer under DHCP clients. I'd rather not change my password, since I have quite a few devices I'd have to update. Is there any other reason he's show up on my network besides having guessed my password? Update: I fixed the Dropbox URL above (how embarrassing, I'm new to Dropbox. Thanks for the heads up, Doug.) Update 2: I tried clicking on "Connect as..." just for the hell of it, and got the dialog below. Now I have even less an idea what's going on than before. I don't have Parallels of VMware running, just the following: Transmission, NetNewsWire, Mail, Things, Safari, iTunes, Photoshop, Pages, Yojimbo, Preferences, AppleScript Editor, Software Update, Airport Utility, and Terminal. I don't think any of those create a virtual network machine, right? And no VMware machine of mine has ever had a name resembling "pe-xpjalle". Update 3: I just changed my passwords on both my N- and G-only networks, and I'm still seeing this, so I highly doubt that it's someone who's figured out my password (twice now). I'm really stumped.

  Read the article

• Can't connect to LAN when connected to D-Link DIR-615

  - by Senseful

  I'm have a D-Link DIR-615 Wireless N 300 Router. I didn't use the CD it comes with to set up the network. Instead I configured it manually through the router's settings that are accessed via a web browser. The main changes I made are: Secured the router so that a password is required before clients can use the wireless internet. Broadcasting 802.11N only (not B or G). I can connect to the router just fine and I'm able to access the internet. The only problem is that I don't see any of the other computers in my LAN. When I try connecting to another Wi-Fi router that I have (which is connected to the same network), I can see all of the computer's on my LAN just fine. Therefore, I'm guessing that the reason I can't connect to the LAN is not a problem with my computer and is a problem with the router instead. I'm on a MacBook Air running Mac OS X 10.6.6. I tried contacting D-Link technical support, but they only try to help you if you have problems connecting to the internet. They aren't really concerned with problems that have to do with the accessing PC's on the same network.

  Read the article

• Cannot Change "Log on through Terminal Services" in Local Security Policy XP from Server 2008 GP

  - by Campo

  This is a mixed AD environment, Server 2003 R2 and 2008 R2 I have a 2003 AD R2 and a 2008 R2 AD. GPO is usually managed from the 2008 R2 machine. I have a RD Gateway on another server as well. I setup the CAP and RAP to allow a normal user to log on to the departments workstation. I also adjusted the GPO for that OU to allow Log on trhough Remote Desktop Gateway for the user group. This worked on my windows 7 workstation. But unfortunately the policy is a different name in XP "allow log on through Terminal Services" I can get through right into the machine but when the log on actually happens to the local machine i get the "Cannot log on interactively" error. This is set in (for the local machine) Secpol.msc Local Security Policy "user rights assignment" but is controlled by the GPO in Computer Configuration Policies Security Settings Local Policies "User Rights Assignment" Do I simply need to adjust the same setting on the same GPO but with a server 2003 GP editor? Feel like that could cause issues... Looking for some direction. Or if anyone has run into this issue yet. UPDATE Should this work? support.microsoft.com/kb/186529 Still seems like I will have the issue as the actual GP settings for Log on through Terminal Services is still different between Server 2008 R2 and 2003 R2.... Another Thought: Should I delete the GPO made for the department and remake it with the 2003 R2 server? I have no 2008 specific settings as the whole department runs XP other than myself. If that's a solution I will move my computer out of the department as a solution... Thoughts?

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >