Search Results

Search found 7756 results on 311 pages for 'hardware acceleration'.

Page 251/311 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• Why would more CPU cores on virtual machine slow compile times?

  - by Sid

  [edit#2] If anyone from VMWare can hit me up with a copy of VMWare Fusion, I'd be more than happy to do the same as a VirtualBox vs VMWare comparison. Somehow I suspect the VMWare hypervisor will be better tuned for hyperthreading (see my answer too) I'm seeing something curious. As I increase the number of cores on my Windows 7 x64 virtual machine, the overall compile time increases instead of decreasing. Compiling is usually very well suited for parallel processing as in the middle part (post dependency mapping) you can simply call a compiler instance on each of your .c/.cpp/.cs/whatever file to build partial objects for the linker to take over. So I would have imagined that compiling would actually scale very well with # of cores. But what I'm seeing is: 8 cores: 1.89 sec 4 cores: 1.33 sec 2 cores: 1.24 sec 1 core: 1.15 sec Is this simply a design artifact due to a particular vendor's hypervisor implementation (type2:virtualbox in my case) or something more pervasive across more VMs to make hypervisor implementations more simpler? With so many factors, I seem to be able to make arguments both for and against this behavior - so if someone knows more about this than me, I'd be curious to read your answer. Thanks Sid [edit:addressing comments] @MartinBeckett: Cold compiles were discarded. @MonsterTruck: Couldn't find an opensource project to compile directly. Would be great but can't screwup my dev env right now. @Mr Lister, @philosodad: Have 8 hw threads, using VirtualBox, so should be 1:1 mapping without emulation @Thorbjorn: I have 6.5GB for the VM and a smallish VS2012 project - it's quite unlikely that I'm swapping in/out trashing the page file. @All: If someone can point to an open source VS2010/VS2012 project, that might be a better community reference than my (proprietary) VS2012 project. Orchard and DNN seem to need environment tweaking to compile in VS2012. I really would like to see if someone with VMWare Fusion also sees this (for VMWare vs VirtualBox compartmentalization) Test details: Hardware: Macbook Pro Retina CPU : Core i7 @ 2.3Ghz (quad core, hyper threaded = 8 cores in windows task manager) Memory : 16 GB Disk : 256GB SSD Host OS: Mac OS X 10.8 VM type: VirtualBox 4.1.18 (type 2 hypervisor) Guest OS: Windows 7 x64 SP1 Compiler: VS2012 compiling a solution with 3 C# Azure projects Compile times measure by VS2012 plugin called 'VSCommands' All tests run 5 times, first 2 runs discarded, last 3 averaged

  Read the article

• My co-worker has not been doing such a good job for the past decade. What do I do? [closed]

  - by stijn

  Possible Duplicate: How do I approach a coworker about his or her code quality? I started working with him almost a decade ago and back then I had never really programmed before, being a young hardware engineer. Right now however I have made quite some progress in all areas being part of software design and i am much, much more skilled than my co-worker who is 15 years older and has been programming more than twice as long. He is super nice and definitely smart enough, but lately his lack of skill and performance are starting to drag me down because we're more and more working on the same codebase. And soon we are going to do a quite ambitious start from scratch creating a whole new hard/software system. I feel it is time to address all issues now, but i do not know how to start. Here are some of the things that I would like to see him improve on: no consistent usage of style, spaces nor tabs (eg if(something ) a =b ) adds newlines around pieces of code to make it easier to read, then commits those with messages like 'no changes made' overall commit messages are useless and so are most of the comments, if there are any (eg 'remove solves for bug Rik' if Rik reported a bug). There is no function/class documentation. lots of spelling errors, in both English and native language, which sometimes are mixed 6/7/8 level deep deep nesting is no exception, a lot of functions start with one level already like if(ptr!=Null){ even when ptr is the result of allocation via new in the constructor numerous source files have over 10k lines of those lines, a major part is simply a result of copy-pasting functionality instead of using a function. This includes copying comments so we end up with 50 occurrences of var=NULL; //TODO TEST this!!!!!!! another part is hundreds of lines of dead code knows what versioning does, yet comments out old code and places new code underneath it when making changes coding skills are below par, especially for the type of rather high precision applications we do. Yet somehow, after a lot of trying and testing, stuff starts to work. But then breaks again some time later because every change casues a waterfall effect. violates every single item in the C++ FAQ lite, practices every bad practice I can think of still doesn't know how to properly use the debugger, but spends hours inspecting messy logfiles in notepad on a tiny laptop screen. Does not make any adjustments to the settings of the software he uses. Never uses keyboard shortcuts. does not seem to progress or learn new things at all. Work rather slow, mostly due to the lack of planning and incorrect usage of tools. How does one deal with this? For starters, how do I make him aware of all these problems? Should I tell the staff about it? And the next step, how to get him to learn new things and adopt another way of working?

  Read the article

• Compiling for T4

  - by Darryl Gove

  I've recently had quite a few queries about compiling for T4 based systems. So it's probably a good time to review what I consider to be the best practices. Always use the latest compiler. Being in the compiler team, this is bound to be something I'd recommend But the serious points are that (a) Every release the tools get better and better, so you are going to be much more effective using the latest release (b) Every release we improve the generated code, so you will see things get better (c) Old releases cannot know about new hardware. Always use optimisation. You should use at least -O to get some amount of optimisation. -xO4 is typically even better as this will add within-file inlining. Always generate debug information, using -g. This allows the tools to attribute information to lines of source. This is particularly important when profiling an application. The default target of -xtarget=generic is often sufficient. This setting is designed to produce a binary that runs well across all supported platforms. If the binary is going to be deployed on only a subset of architectures, then it is possible to produce a binary that only uses the instructions supported on these architectures, which may lead to some performance gains. I've previously discussed which chips support which architectures, and I'd recommend that you take a look at the chart that goes with the discussion. Crossfile optimisation (-xipo) can be very useful - particularly when the hot source code is distributed across multiple source files. If you're allowed to have something as geeky as favourite compiler optimisations, then this is mine! Profile feedback (-xprofile=[collect: | use:]) will help the compiler make the best code layout decisions, and is particularly effective with crossfile optimisations. But what makes this optimisation really useful is that codes that are dominated by branch instructions don't typically improve much with "traditional" compiler optimisation, but often do respond well to being built with profile feedback. The macro flag -fast aims to provide a one-stop "give me a fast application" flag. This usually gives a best performing binary, but with a few caveats. It assumes the build platform is also the deployment platform, it enables floating point optimisations, and it makes some relatively weak assumptions about pointer aliasing. It's worth investigating. SPARC64 processor, T3, and T4 implement floating point multiply accumulate instructions. These can substantially improve floating point performance. To generate them the compiler needs the flag -fma=fused and also needs an architecture that supports the instruction (at least -xarch=sparcfmaf). The most critical advise is that anyone doing performance work should profile their application. I cannot overstate how important it is to look at where the time is going in order to determine what can be done to improve it. I also presented at Oracle OpenWorld on this topic, so it might be helpful to review those slides.

  Read the article

• Data Virtualization: Federated and Hybrid

  - by Krishnamoorthy

  Data becomes useful when it can be leveraged at the right time. Not only enterprises application stores operate on large volume, velocity and variety of data. Mobile and social computing are in the need of operating in foresaid data. Replicating and transferring large swaths of data is one challenge faced in the field of data integration. However, smaller chunks of data aggregated from a variety of sources presents and even more interesting challenge in the industry. Over the past few decades, technology trends focused on best user experience, operating systems, high performance computing, high performance web sites, analysis of warehouse data, service oriented architecture, social computing, cloud computing, and big data. Operating on the ‘dark data’ becomes mandatory in the future technology trend, although, no solution can make dark data useful data in a single day. Useful data can be quantified by the facts of contextual, personalized and on time delivery. In most cases, data from a single source may not be complete the picture. Data has to be combined and computed from various sources, where data may be captured as hybrid data, meaning the combination of structured and unstructured data. Since related data is often found across disparate sources, effectively integrating these sources determines how useful this data ultimately becomes. Technology trends in 2013 are expected to focus on big data and private cloud. Consumers are not merely interested in where data is located or how data is retrieved and computed. Consumers are interested in how quick and how the data can be leveraged. In many cases, data virtualization is the right solution, and is expected to play a foundational role for SOA, Cloud integration, and Big Data. The Oracle Data Integration portfolio includes a data virtualization product called ODSI (Oracle Data Service Integrator). Unlike other data virtualization solutions, ODSI can perform both read and write operations on federated/hybrid data (RDBMS, Webservices,  delimited file and XML). The ODSI Engine is built on XQuery, hence ODSI user can perform computations on data either using XQuery or SQL. Built in data and query caching features, which reduces latency in repetitive calls. Rightly positioning ODSI, can results in a highly scalable model, reducing spend on additional hardware infrastructure.

  Read the article

• Seven Accounting Changes for 2010

  - by Theresa Hickman

  I read a very interesting article called Seven Accounting Changes That Will Affect Your 2010 Annual Report from SmartPros that nicely summarized how 2010 annual financial statements will be impacted.  Here’s a Reader’s Digest version of the changes: 1.  Changes to revenue recognition if you sell bundled products with multiple deliverables: Old Rule: You needed to objectively establish the “fair value” of each bundled item. So if you sold a dishwasher plus installation and could not establish the fair value of the installation, you might have to delay recognizing revenue of the dishwasher days or weeks later until it was installed. New Rule (ASU 2009-13): “Objective” proof of each service or good is no longer required; you can simply estimate the selling price of the installation and warranty. So the dishwasher vendor can recognize the dishwasher revenue immediately at the point of sale without waiting a few weeks for the installation. Then they can recognize the estimated value of the installation after it is complete. 2.  Changes to revenue recognition for devices with embedded software: Old Rule: Hardware devices with embedded software, such as the iPhone, had to follow stringent software revrec rules. This forced Apple to recognize iPhone revenues over two years, the period of time that software updates were provided. New Rule (ASU 2009-14): Software revrec rules no longer apply to these devices with embedded software; these devices can now follow ASU 2009-13. This allows vendors, such as Apple, to recognize revenue sooner. 3.  Fair value disclosures: Companies (both public and private) now need to spend extra time gathering, summarizing, and disclosing information about items measured at fair value, such as significant transfers in and out of Level 1(quoted market price), Level 2 (valuation based on observable markets), and Level 3 (valuations based on internal information). 4.  Consolidation of variable interest entities (a.k.a special purpose entities): Consolidation rules for variable interest entities now require a qualitative, not quantitative, analysis to determine the primary beneficiary. Instead of simply looking at the percentage of voting interests, the primary beneficiary could have less than the majority interests as long as it has the power to direct the activities and absorb any losses.  5.  XBRL: Starting in June 2011, all U.S. public companies are required to file financial statements to the SEC using XBRL. Note: Oracle supports XBRL reporting. 6.  Non-GAAP financial disclosures: Companies that report non-GAAP measures of performance, such as EBITDA in SEC filings, have more flexibility.  The new interpretations can be found here: http://www.sec.gov/divisions/corpfin/guidance/nongaapinterp.htm.  7.  Loss contingencies disclosures: Companies should expect additional scrutiny of their loss disclosures, such as those from litigation losses, in their annual financial statements. The SEC wants more disclosures about loss contingencies sooner instead of after the cases are settled.

  Read the article

• Fail to start windows after Ubuntu 11.10 install

  - by user49995

  Computer: HP Pavilion dv7-6140eo OS: Originally Win7 I recently decided to try out Ubuntu, and I decided to dual-boot it with Windows 7. First I googled some how-to's, then I downloaded Ubuntu onto a memory stick and made a second partition (I originally only had one partition that I shrunk and used the unallocated space to install onto during the Ubuntu install). During the install I set format type to xt4 (or something, it was the default option), chose the "in the beginning" option and set the last option as "\". The install was successful. Although, when I restarted my computer I weren't able to choose which operating system to start; it went right into windows. After showing the windows logo for half a second before rebooting, I get a blue screen (see bottom of the page). Trying to fix it, I deleted the newly made partition I had just installed Ubuntu onto (seeing it wasn't working either). This made no difference. I proceeded with installing Ubuntu again, so I would at least have a functioning computer, and now Ubuntu works fine (on it now). The only difference on start-up is that I get a Grub window asking me to between several options including Linux and Windows 7 (loader). Now, if I choose Windows 7, I get the message "Windows was unable to start. A recent software or hardware change might be the cause". It recommends me to choose the first option of the two it provides; to start start-up repair tool. The second option being starting windows normally. If I start windows normally, the same thing happens as earlier. My computer does not have a windows installation CD. Although, it has (at least it used to, if I haven't screwed that too up) a 17gb recovery partition. In addition I made an image of the computer onto a external hard drive when I first got it. Though, I have no idea how to use either. If anyone has any idea how I can make windows work again or reinstall it (already backed up my files) it would be greatly appreciated. I still prefer to dual boot between the two functioning operating systems, but I will settle for a functioning windows 7. Thanks a lot for any replies. Blue screen: A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove and newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configures and terminated. Run CMKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: **STOP: 0x0000007B (0xFFFFF880009A97E8,0xFFFFFFFFC0000034, 0x0000000000000000,0x0000000000000000

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• Addressing threats introduced by the BYOD trend

  - by kyap

  With the growth of the mobile technology segment, enterprises are facing a new type of threats introduced by the BYOD (Bring Your Own Device) trend, where employees use their own devices (laptops, tablets or smartphones) not necessarily secured to access corporate network and information.In the past - actually even right now, enterprises used to provide laptops to their employees for their daily work, with specific operating systems including anti-virus and desktop management tools, in order to make sure that the pools of laptop allocated are spyware or trojan-horse free to access the internal network and sensitive information. But the BYOD reality is breaking this paradigm and open new security breaches for enterprises as most of the username/password based systems, especially the internal web applications, can be accessed by less or none protected device.To address this reality we can adopt 3 approaches:1. Coué's approach: Close your eyes and assume that your employees are mature enough to know what he/she should or should not do.2. Consensus approach: Provide a list of restricted and 'certified' devices to the internal network. 3. Military approach: Access internal systems with certified laptop ONLYIf you choose option 1: Thanks for visiting my blog and I hope you find the others entries more useful :)If you choose option 2: The proliferation of new hardware and software updates every quarter makes this approach very costly and difficult to maintain.If you choose option 3: You need to find a way to allow the access into your sensitive application from the corporate authorized machines only, managed by the IT administrators... but how? The challenge with option 3 is to find out how end-users can restrict access to certain sensitive applications only from authorized machines, or from another angle end-users can not access the sensitive applications if they are not using the authorized machine... So what if we find a way to store the applications credential secretly from the end-users, and then automatically submit them when the end-users access the application? With this model, end-users do not know the username/password to access the applications so even if the end-users use their own devices they will not able to login. Also, there's no need to reconfigure existing applications to adapt to the new authenticate scheme given that we are still leverage the same username/password authenticate model at the application level. To adopt this model, you can leverage Oracle Enterprise Single Sign On. In short, Oracle ESSO is a desktop based solution, capable to store credentials of Web and Native based applications. At the application startup and if it is configured as an esso-enabled application - check out my previous post on how to make Skype essso-enabled, Oracle ESSO takes over automatically the sign-in sequence with the store credential on behalf of the end-users. Combined with Oracle ESSO Provisioning Gateway, the credentials can be 'pushed' in advance from an actual provisioning server, like Oracle Identity Manager or Tivoli Identity Manager, so the end-users can login into sensitive application without even knowing the actual username and password, so they can not login with other machines rather than those secured by Oracle ESSO.Below is a graphical illustration of this approach:With this model, not only you can protect the access to sensitive applications only from authorized machine, you can also implement much stronger Password Policies in terms of Password Complexity as well as Password Reset Frequency but end-users will not need to remember the passwords anymore.If you are interested, do not hesitate to check out the Oracle Enterprise Single Sign-on products from OTN !

  Read the article

• Oracle Virtualization Friday Spotlight - November 8, 2013

  - by Monica Kumar

  Hands-on Private Cloud Simulator In One Hour Submitted by: Doan Nguyen, Senior Principal Product Marketing Director My aeronautics instructor used to say, "you can’t appreciate flying until you take flight." To clarify, this is not about gearing up in a flying squirrel suit and hopping off a cliff (topic for another blog!) but rather about flying an airplane. The idea is to get hands-on with the controls at the cockpit and experience flight before you actually fly a real plane. After the initial 40 hours of flight time, the concept sank in and it really made sense.This concept is what inspired our technical experts to put together the hands-on lab for a private cloud deployment and management self-service model. Yes, we are comparing the lab to a flight simulator! Let’s look at the parallels: To get trained to fly, starting in the simulator gets you off the ground quicker. There is no need to have a real plane to begin with. In a hands-on lab, there is no need for a real server, with networking and real storage installed. All you need is your laptop The simulator is pre-configured, pre-flight check done. Similarly, in a hands-on lab, Oracle VM and Oracle Enterprise Manager are pre-configured and assembled using Oracle VM VirtualBox as the container. Software installations are not needed. After time spent training at the controls, you can really appreciate the practical experience of flying. Along the same lines, the hands-on lab is a guided learning path, without the encumbrances of hardware, software installation, so you can learn about cloud deployment and management.  However, unlike the simulator training, your time investment with the lab is only about an hour and not 40 hours! This hands-on lab takes you through private cloud deployment and management using Oracle VM and  Oracle Enterprise Manager Cloud Control 12c in an Infrastructure as a service IaaS model. You will first configure the IaaS cloud as the cloud administrator and then deploy guest virtual machines (VMs) as a self-service user. Then you are ready to take flight into the cloud! Why not step into the cockpit now!

  Read the article

• Can't boot Ubuntu 12.10 graphics problem

  - by Frantumn

  I can't boot since installing Ubuntu 12.10 When I try to run Ubuntu My computer never gets to the Ubuntu screen with the loading dots. I tried to run in recovery mode with safe graphics (failsafex) When I do this a message pops up saying "the system is running in low graphics mode", If I click okay I am asked what would I like to do and am given four options. I tried running low graphics for one session and then a message appears with a progress bar and says standby one minute while the display restarts. The progress bar never moves and if I click okay the whole process just restarts. I Don't know what to do from here I can't get into the OS. I'm not sure whether the problem is related to compatibility with my laptop monitor or my graphic card nvidia360m I had to install using a safe graphics mode. To learn about how I installed see this link. This link also has information on my computer hardware. Can't install Ubuntu since 10.10 ----UPDATE--- I was able to get into a desktop environment By installing Nvidia-current however it is messy. I have a screen and I am able to see my desktop however there is no unity bar and none of the keyboard controls work. I can right click and create a folder on the desktop and then I can see inside that folder in a traditional browser window. There is still no top menu or unity bar. When I boot normally I don't get into the desktop environment and I get this message in tty 'GPU lockup switching to software FBCON' Okay, I've played around with tips the pages from comments. I've been able to consistantly get into a safemode desktop environment using the xorg & nouveau drivers. I've tried switching between the 5 different options in the Additional Drivers tab in Software Sources. The nVidia (proprietary, tested) driver gets beyond the GPU lockup on a normal boot and actually gets into a Desktop. The issue is then that there is no Unity bar, or top screen menu bar and the resolution is very low. I've tried switching to the (prop, tested) driver and then reinstalling Unity and Ubuntu-Desktop but that didn't work either.

  Read the article

• WHERE x = @x OR @x IS NULL

  - by steveh99999

  Every SQL DBA and developer should read the blog of MVP Erland Sommarskog – but particularly  his article on dynamic search conditions in T-SQL. I’ve linked above to his SQL 2005 article but his 2008 version is also a must-read. I seem to regularly come across uses of the SQL in the title above… Erland’s article explains in detail why this is inefficient, but I came across a nice example recently… A stored procedure contained the following code :- WHERE @Name is null or [Name] like @Name as a nonclustered index exists on the Name column, you might assume this would be handled efficiently by SQL Server. However, I got the following output from SET STATISTICS IO Table 'xxxxx'. Scan count 15, logical reads 47760, physical reads 9, read-ahead reads 13872, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Note the high number of logical reads… After a bit of investigation, we found that @Name could never actually be set to NULL in this particular example. ie the @x IS NULL was spurious… So, we changed the call to WHERE  [Name] like @Name Now, how much more efficient is this code ? Table 'xxxxx'. Scan count 3, logical reads 24, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0 A nice easy win in this case…… a full index scan has been replaced by a significantly more efficient index seek. I managed to recreate the same behaviour on Adventureworks – here’s a quick query to demonstrate :- USE adventureworks SET STATISTICS IO ON DECLARE @id INT = 51721 SELECT * FROM Sales.SalesOrderDetail WHERE @id IS NULL OR salesorderid = @id SELECT * FROM Sales.SalesOrderDetail WHERE salesorderid = @id Take a look at the STATISTICS IO output and compare the actual query plans used to prove the impact of  WHERE @id IS NULL. And just to follow some of Erland’s advice – here’s how you could get similar performance if it was possible that @id could actually sometimes contain NULL. DECLARE @sql NVARCHAR(4000), @parameterlist NVARCHAR(4000) DECLARE @id INT = 51721 – or change to NULL to prove query is functionally correct SET @sql = 'SELECT * FROM Sales.SalesOrderDetail WHERE 1 = 1' IF @id IS NOT NULL SET @sql = @sql + ' AND salesorderid = @id' IF @id IS NULL SET @sql = @sql + ' AND salesorderid IS NULL' SET @parameterlist = '@id INT' EXEC sp_executesql @sql, @parameterlist,@id Sometimes I think we focus too much on hardware and SQL Server configuration – when really the answer is focus on writing efficient SQL.

  Read the article

• S11 launched

  - by unixman

  Now that Oracle Solaris 11 is out, its time to do 2 things -- 1) Its time to see what's in it, what's new and why its important, and then assess why it might make sense to begin evaluating it for your needs and 2) Its time to acknowledge, give thanks to and congratulate all the R&D personnel, architects, engineers, designers and testers who've put in so much effort and energy into helping make Solaris 11 (and SunOS 5.11) what it has become -- starting way back circa 2004 and, more importantly, culminating in the recent years and months -- staying focused on the execution, unwavering in the face of various challenges. For #1 above, here are a few good things to get going with - Watch the product launch replay - Visit the Solaris 11 Spotlight section on oracle.com - Get comfortable through introductory videos and detailed "how-to" guides (ex: how to create and publish IPS packages), white papers on the new default root file system, ZFS, and reap the benefits brought on by the fundamental shift in easing the administration experience - Look at the next level of software lifecycle management that is enabled by technologies such as Automated Installer and Image Packaging System -- that dramatically address patch management-related challenges - Understand how we continue to innovate in areas of service intelligence, reliability and availability - Start to evaluate enhancements in virtualization capabilities -- whether influenced by the need to consolidate or motivated by the need to have increased service mobility across physical systems, leveraging hardware-level abstractions - Gain more control over your network-centric services through enhancements in network resource management, observability and I/O performance - Look beyond your existing infrastructure with confidence that you can re-host and transition to newer systems with the use of Solaris 10 zones running on top of Solaris 11 - Relish in the fact that you can do all this, get your data to be secure and encrypted and more, on both, SPARC and x86-based systems. - Stay informed by keeping an eye on relevant blogs, which we've begun turning up recently. - Go through a hands-on lab - Sign up to take a class or just opt to watch various videos to begin to raise your comfort level with these technologies For #2 above -- There are many ways to do that. One way is to just say "thanks" with an email, a post, or a simple card,  similar to this one seen at a Barnes and Noble store recently.  The front of the card is followed by what's inside... and as the saying goes, now more then ever "it's what's inside that counts" And here's the inside of the card: So, what are you waiting for ? Go download and try it out, and please let us know what you think of it!

  Read the article

• Ubuntu doesn't "see" external USB Hard Disk

  - by Mina Michael

  It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

  Read the article

• Software Architecture Analysis Method (SAAM)

  Software Architecture Analysis Method (SAAM) is a methodology used to determine how specific application quality attributes were achieved and how possible changes in the future will affect quality attributes based on hypothetical cases studies. Common quality attributes that can be utilized by this methodology include modifiability, robustness, portability, and extensibility. Quality Attribute: Application Modifiability The Modifiability quality attribute refers to how easy it changing the system in the future will be. This to me is a very open-ended attribute because a business could decide to transform a Point of Sale (POS) system in to a Lead Tracking system overnight. (Yes, this did actually happen to me) In order for SAAM to be properly applied for checking this attribute specific hypothetical case studies need to be created and review for the modifiability attribute due to the fact that various scenarios would return various results based on the amount of changes. In the case of the POS change out a payment gateway or adding an additional payment would have scored very high in comparison to changing the system over to a lead management system. I personally would evaluate this quality attribute based on the S.O.I.L.D Principles of software design. I have found from my experience the use of S.O.I.L.D in software design allows for the adoption of changes within a system. Quality Attribute: Application Robustness The Robustness quality attribute refers to how an application handles the unexpected. The unexpected can be defined but is not limited to anything not anticipated in the originating design of the system. For example: Bad Data, Limited to no network connectivity, invalid permissions, or any unexpected application exceptions. I would personally evaluate this quality attribute based on how the system handled the exceptions. Robustness Considerations Did the system stop or did it handle the unexpected error? Did the system log the unexpected error for future debugging? What message did the user receive about the error? Quality Attribute: Application Portability The Portability quality attribute refers to the ease of porting an application to run in a new operating system or device. For example, It is much easier to alter an ASP.net website to be accessible by a PC, Mac, IPhone, Android Phone, Mini PC, or Table in comparison to desktop application written in VB.net because a lot more work would be involved to get the desktop app to the point where it would be viable to port the application over to the various environments and devices. I would personally evaluate this quality attribute based on each new environment for which the hypothetical case study identifies. I would pay particular attention to the following items. Portability Considerations Hardware Dependencies Operating System Dependencies Data Source Dependencies Network Dependencies and Availabilities  Quality Attribute: Application Extensibility The Extensibility quality attribute refers to the ease of adding new features to an existing application without impacting existing functionality. I would personally evaluate this quality attribute based on each new environment for the following Extensibility  Considerations Hard coded Variables versus Configurable variables Application Documentation (External Documents and Codebase Documentation.) The use of Solid Design Principles

  Read the article

• Fuji camera "mounts" but folder not in Dolphin After Kubuntu 13.10 upgrade

  - by user207207

  Fuji camera mount reported in attached devices but not visible in Dolphin After Kubuntu 13.10 upgrade Have reinstalled the driver, and a few other suggestions, for other cameras mounts failing on previous Ubuntu upgrades. I have already spent a couple of hours trying to get my photo's off the camera, very annoying. Worked perfectly in 11.04, 11.10, 12.04, 12.10 and 13.04. dmesg | tail; lsusb; lsb_release -a [ 6181.858786] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90009400000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396236] CPUM: APIC 00 at 00000000fee00000 (mapped at ffffc90000c6a000) - ver 0x80050010, lint0=0x10700 lint1=0x00400 pc=0x00400 thmr=0x10000 [17261.396239] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90000c72000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396241] CPUM: APIC 02 at 00000000fee00000 (mapped at ffffc90000c70000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396255] CPUM: APIC 01 at 00000000fee00000 (mapped at ffffc90000c6e000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [32456.884907] usb 2-5: new high-speed USB device number 2 using ehci-pci [32457.654046] usb 2-5: New USB device found, idVendor=04cb, idProduct=01e8 [32457.654050] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [32457.654052] usb 2-5: Product: Digital Camera [32457.654053] usb 2-5: SerialNumber: 4C3230302020091117CAA59WP18548 Bus 002 Device 002: ID 04cb:01e8 Fuji Photo Film Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 2013:024f PCTV Systems nanoStick T2 290e Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub No LSB modules are available. Distributor ID: Ubuntu vissibleDescription: Ubuntu 13.10 Release: 13.10 Codename: saucy sudo apt-get install gvfs-bin gvfs-mount gphoto2://[usb:002,002] Error mounting location: Error initializing camera: -108: No such file or directory ...... I have reported a bug in Dolphin, which has been transferred to Solid. Further information : I ran solid-hardware list details udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:04.1/usb2/2-5' parent = '/org/kde/solid/udev' (string) vendor = '04cb' (string) product = 'Digital Camera' (string) description = 'Camera' (string) Block.major = 189 (0xbd) (int) Block.minor = 137 (0x89) (int) Block.device = '/dev/bus/usb/002/010' (string) Camera.supportedProtocols = {'ptp'} (string list) Camera.supportedDrivers = {'gphoto'} (string list) I still can't get my photo's off, I can see the folders using the Gimp menu. If anyone has got any ideas, I'm willing to try them.

  Read the article

• What's about Java?

  - by Silviu Turuga

  What is Java? In very short words, Java is a programming language that let you make an application that can be run on different operating systems, no matter we are talking about Windows, Mac OS, Linux or even embedded devices, such as RaspberryPi. When you compile a Java program, instead of getting a binary output as you get on other programming languages, you'll get a Java intermediate code, called Java bytecode. This is interpreted at run time, by a virtual machine that is specifically for the hardware and operating system you are using. What Java do i need? There are 5 major versions of Java: Java SE(Standard Edition) - this is what I'll use on most of my tutorials. Most of the examples will run on Java 6, but for others you'll need Java 7. Java EE (Enterprise Edition) - used for enterprise development Java ME (Micro Edition) - for running Java on mobile and different embedded devices such as PDAs, TV set-top boxes, printers, etc. Java Embedded - for some embedded devices such as Raspberry Pi, where the resources are limited JavaFX - to develop rich content User Interfaces. This is also something that will use a lot. More detailed information can be found on Oracle's website If you just want to run java applications you'll need the JRE (Java Runtime Environment) installed. If you want to program and create new applications, then you'll need the JDK (Java Development Kit).  How to check if Java is already installed? From command line, if you are on Windows, or from Terminal on Mac enter the following: java -version You should get something like this, if you have java installed on your system: java version "1.6.0_37" Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909) Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode) Note: your current Java version might be different from mine. More information https://www.java.com/en/download/faq/whatis_java.xml http://en.wikipedia.org/wiki/Java_(programming_language) Next steps Install Java SDK Chose an IDE. I recommend NetBeans as it is very easy to use and also let you quickly create the GUI of your application Alternatives are Eclipse, Komodo Edit (for Mac), etc. There are plenty of solutions both free or paid. Resources on web Oracle Tutorials - lot of tutorials and useful resources JavaRanch - forum about java

  Read the article

• High CPU load for 1:30 minutes when mounting ext4-raid partition

  - by sirion

  I have a raid 5 (software) with 5x2TB drives. I encrypted the raid with cryptsetup and put an ext4-partition on top. In the beginning opening and mounting the raid took less than 10 seconds, now (for a few weeks) mounting alone takes 1:30 minutes and the cpu stays around 93% the whole time: The output of "time sudo mount /dev/mapper/8000 /media/8000" is: real 1m31.952s user 0m0.008s sys 1m25.229s At the same time only one line is added to /var/log/syslog: kernel: [ 2240.921381] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) My Ubuntu-version is "12.04.1 LTS" and no updates are pending. I checked the partition with fsck, but it says that all is ok. The "cryptsetup luksOpen" command only takes a few seconds. I also tried changing the raid-bitmap (as it was suggested in some forum) but it did not change the behaviour. sudo mdadm --grow /dev/md0 -b internal and sudo mdadm --grow /dev/md0 -b none I had the idea that it might be the hardware being slow, but a read test with "sudo hdparm -t /dev/md0" spit out values between 62 and 159 MB/sec: Timing buffered disk reads: 382 MB in 3.00 seconds = 127.14 MB/sec Timing buffered disk reads: 482 MB in 3.02 seconds = 159.62 MB/sec Timing buffered disk reads: 190 MB in 3.03 seconds = 62.65 MB/sec Timing buffered disk reads: 474 MB in 3.02 seconds = 157.12 MB/sec Although I think it is strange that the read rate jumps by more than 100% - could that mean something? The speed test when reading from the mapped (decrypted) device shows similar behavior, although it is of course much slower. "sudo hdparm -t /dev/mapper/8000": Timing buffered disk reads: 56 MB in 3.02 seconds = 18.54 MB/sec Timing buffered disk reads: 122 MB in 3.09 seconds = 39.43 MB/sec Timing buffered disk reads: 134 MB in 3.02 seconds = 44.35 MB/sec The output of a verbose mount "mount -vvv /dev/mapper/8000 /media/8000" does not help much: mount: fstab path: "/etc/fstab" mount: mtab path: "/etc/mtab" mount: lock path: "/etc/mtab~" mount: temp path: "/etc/mtab.tmp" mount: UID: 0 mount: eUID: 0 mount: spec: "/dev/mapper/8000" mount: node: "/media/8000" mount: types: "(null)" mount: opts: "(null)" mount: you didn't specify a filesystem type for /dev/mapper/8000 I will try type ext4 mount: mount(2) syscall: source: "/dev/mapper/8000", target: "/media/8000", filesystemtype: "ext4", mountflags: -1058209792, data: (null) Any idea where I could find additional information on why mounting takes so long, or what additional tests I could run?

  Read the article

• Java @Contented annotation to help reduce false sharing

  - by Dave

  See this posting by Aleksey Shipilev for details -- @Contended is something we've wanted for a long time. The JVM provides automatic layout and placement of fields. Usually it'll (a) sort fields by descending size to improve footprint, and (b) pack reference fields so the garbage collector can process a contiguous run of reference fields when tracing. @Contended gives the program a way to provide more explicit guidance with respect to concurrency and false sharing. Using this facility we can sequester hot frequently written shared fields away from other mostly read-only or cold fields. The simple rule is that read-sharing is cheap, and write-sharing is very expensive. We can also pack fields together that tend to be written together by the same thread at about the same time. More generally, we're trying to influence relative field placement to minimize coherency misses. Fields that are accessed closely together in time should be placed proximally in space to promote cache locality. That is, temporal locality should condition spatial locality. Fields accessed together in time should be nearby in space. That having been said, we have to be careful to avoid false sharing and excessive invalidation from coherence traffic. As such, we try to cluster or otherwise sequester fields that tend to written at approximately the same time by the same thread onto the same cache line. Note that there's a tension at play: if we try too hard to minimize single-threaded capacity misses then we can end up with excessive coherency misses running in a parallel environment. Theres no single optimal layout for both single-thread and multithreaded environments. And the ideal layout problem itself is NP-hard. Ideally, a JVM would employ hardware monitoring facilities to detect sharing behavior and change the layout on the fly. That's a bit difficult as we don't yet have the right plumbing to provide efficient and expedient information to the JVM. Hint: we need to disintermediate the OS and hypervisor. Another challenge is that raw field offsets are used in the unsafe facility, so we'd need to address that issue, possibly with an extra level of indirection. Finally, I'd like to be able to pack final fields together as well, as those are known to be read-only.

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• How / Where can I host my Java web application? [closed]

  - by Huliax

  Possible Duplicate: How to find web hosting that meets my requirements? In case you want to skip to the crux of my inquiry just read the bold type. I just finished my CS degree (at 39 years old :-)). For my final project I designed and built a system that can provide local positioning / location awareness to mobile wifi devices (only have Android client thus far). The server receives data from clients, processes it, and responds to the clients with a messages containing information about their respective locations. I would like to continue the project (perhaps release as open source but that is a different discussion). Thus far my server application has been running on the CS department's hardware where I could pretty much do whatever I wanted. I'm getting kicked off that system in a few weeks so I have to find a new home for my server application. I need a host that will let me run my Java server (along w/ mySQL db) -- preferably on the cheap since I haven't yet got a job. I have very little experience with the "real world" of web development / hosting. I'm having trouble figuring out what kind of hosting service will let me run my application as is. If that turns out to be a tall order then I need to know what my options are for changing thing so that I can get up and running with some hosting. As an aside, I'm also researching whether or not I should rewrite this in a different language. Trying to figure out if there is a substantially better (for whatever reason) one for what I'm doing. This might also potentially have a bearing on my hosting needs. One possibility is to write the server in something more widely accepted by hosting services. I have been searching for answers to my question and haven't found quite what I'm looking for. Part of the problem might be that I don't know exactly what terminology to use. If there is a good answer to this question elsewhere please feel free to point me towards it. Thanks for help / advice.

  Read the article

• Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

  - by IcarusNM

  I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

  Read the article

• Does OO, TDD, and Refactoring to Smaller Functions affect Speed of Code?

  - by Dennis

  In Computer Science field, I have noticed a notable shift in thinking when it comes to programming. The advice as it stands now is write smaller, more testable code refactor existing code into smaller and smaller chunks of code until most of your methods/functions are just a few lines long write functions that only do one thing (which makes them smaller again) This is a change compared to the "old" or "bad" code practices where you have methods spanning 2500 lines, and big classes doing everything. My question is this: when it call comes down to machine code, to 1s and 0s, to assembly instructions, should I be at all concerned that my class-separated code with variety of small-to-tiny functions generates too much extra overhead? While I am not exactly familiar with how OO code and function calls are handled in ASM in the end, I do have some idea. I assume that each extra function call, object call, or include call (in some languages), generate an extra set of instructions, thereby increasing code's volume and adding various overhead, without adding actual "useful" code. I also imagine that good optimizations can be done to ASM before it is actually ran on the hardware, but that optimization can only do so much too. Hence, my question -- how much overhead (in space and speed) does well-separated code (split up across hundreds of files, classes, and methods) actually introduce compared to having "one big method that contains everything", due to this overhead? UPDATE for clarity: I am assuming that adding more and more functions and more and more objects and classes in a code will result in more and more parameter passing between smaller code pieces. It was said somewhere (quote TBD) that up to 70% of all code is made up of ASM's MOV instruction - loading CPU registers with proper variables, not the actual computation being done. In my case, you load up CPU's time with PUSH/POP instructions to provide linkage and parameter passing between various pieces of code. The smaller you make your pieces of code, the more overhead "linkage" is required. I am concerned that this linkage adds to software bloat and slow-down and I am wondering if I should be concerned about this, and how much, if any at all, because current and future generations of programmers who are building software for the next century, will have to live with and consume software built using these practices. UPDATE: Multiple files I am writing new code now that is slowly replacing old code. In particular I've noted that one of the old classes was a ~3000 line file (as mentioned earlier). Now it is becoming a set of 15-20 files located across various directories, including test files and not including PHP framework I am using to bind some things together. More files are coming as well. When it comes to disk I/O, loading multiple files is slower than loading one large file. Of course not all files are loaded, they are loaded as needed, and disk caching and memory caching options exist, and yet still I believe that loading multiple files takes more processing than loading a single file into memory. I am adding that to my concern.

  Read the article

• Building Enterprise Smartphone App &ndash; Part 3: Key Concerns

  - by Tim Murphy

  This is part 3 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Keys Concerns Of Smartphones In The Enterprise These are the factors that you need to be aware of and address in order to build successful enterprise smartphone applications.  Most of them have nothing to do with the application itself as you will see here. Managing Devices Managing devices is a factor that is going to effect how much your company will have to spend outside of developing the applications.  How will you track the devices within the corporation?  How often will you have to replace phones and as a consequence have to upgrade your applications to support new phones?  The devices can represent a significant investment of capital.  If these questions are not addressed you will find a number of hidden costs throughout the life of your solution. Purchase or BYOD We have seen the trend of Bring Your Own Device (BYOD) lately within the enterprise.  How many meetings have you been in where someone is on their personal iPad, iPhone, Android phone or Windows Phone?  The issue is if you can afford to support everyone's choice in device? That is a lot to take on even if you only support the current release of each platform. Do you go with the most popular device or do you pick a platform that best matches your current ecosystem and distribute company owned devices?  There is no easy answer here, but you should be able give some dollar value to both hardware and development costs related to platform coverage. Asset Tracking/Insurance Smartphones are devices that are easier to lose or have stolen than laptops and desktops. Not only do you have your normal asset management concerns but also assignment of financial responsibility. You also will need to insure them against damage and theft and add legal documents that spell out the responsibilities of the employees that use these devices. Personal vs. Corporate Data What happens when you terminate an employee?  How do you recover the device?  What happens when they have put personal data on the device?  These are all situation that can cause possible loss of corporate intellectual property or legal repercussions of reclaiming a device with personal data on it.  Policies need to be put in place that protect the company from being exposed to type of loss.  This can mean significant legal and procedural cost that you need to consider. Coming Up In the last installment of this series I will cover application development considerations. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

  Read the article

• is a factory pattern to prevent multuple instances for same object (instance that is Equal) good design?

  - by dsollen

  I have a number of objects storing state. There are essentially two types of fields. The ones that uniquly define what the object is (what node, what edge etc), and the oens that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methdos, so these objects all act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approch which accepts a Builder object and construct the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquly defines the type of object (this is node A nto node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows it's state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overiding of serlization methods to make it work (ensure when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in it's place), as well as using a weakHashMap as if it was a weakHashSet to know rather an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to it's own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state taht is different then my memory; to tell my memory when it's own state is inconsistent. I believe this is possible despit their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect I'm posting).

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >