Search Results

Search found 8039 results on 322 pages for 'init param'.

Page 251/322 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• The Raspberry Pi JavaFX In-Car System (Part 3)

  - by speakjava

  Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

  Read the article

• Android Bitmap : collision Detecting [on hold]

  - by user2505374

  I am writing an Android game right now and I would need some help in the collision of the wall on screen. When I drag the ball in the top and right it able to collide in wall but when I drag it faster it was able to overlap in the wall. public boolean onTouchEvent(MotionEvent event) { int x = (int) event.getX(); int y = (int) event.getY(); switch (event.getAction()) { // if the player moves case MotionEvent.ACTION_MOVE: { if (playerTouchRect.contains(x, y)) { boolean left = false; boolean right = false; boolean up = false; boolean down = false; boolean canMove = false; boolean foundFinish = false; if (x != pLastXPos) { if (x < pLastXPos) { left = true; } else { right = true; } pLastXPos = x; } if (y != pLastYPos) { if (y < pLastYPos) { up = true; } else { down = true; } pLastYPos = y; } plCellRect = getRectFromPos(x, y); newplRect.set(playerRect); newplRect.left = x - (int) (playerRect.width() / 2); newplRect.right = x + (int) (playerRect.width() / 2); newplRect.top = y - (int) (playerRect.height() / 2); newplRect.bottom = y + (int) (playerRect.height() / 2); int currentRow = 0; int currentCol = 0; currentRow = getRowFromYPos(newplRect.top); currentCol = getColFromXPos(newplRect.right); if(!canMove){ canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] == Cell.wall; canMove =true; } finishTest = mapManager.getCurrentTile().pMaze[currentRow][currentCol]; foundA = finishTest == Cell.valueOf(letterNotGet + ""); canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] != Cell.wall; canMove = (finishTest == Cell.floor || finishTest == Cell.pl) && canMove; if (canMove) { invalidate(); setTitle(); } if (foundA) { mapManager.getCurrentTile().pMaze[currentRow][currentCol] = Cell.floor; // finishTest letterGotten.add(letterNotGet); playCurrentLetter(); /*sounds.play(sExplosion, 1.0f, 1.0f, 0, 0, 1.5f);*/ foundS = letterNotGet == 's'; letterNotGet++; }if(foundS){ AlertDialog.Builder builder = new AlertDialog.Builder(mainActivity); builder.setTitle(mainActivity.getText(R.string.finished_title)); LayoutInflater inflater = mainActivity.getLayoutInflater(); View view = inflater.inflate(R.layout.finish, null); builder.setView(view); View closeButton =view.findViewById(R.id.closeGame); closeButton.setOnClickListener(new OnClickListener() { @Override public void onClick(View clicked) { if(clicked.getId() == R.id.closeGame) { mainActivity.finish(); } } }); AlertDialog finishDialog = builder.create(); finishDialog.show(); } else { Log.d(TAG, "INFO: updated player position"); playerRect.set(newplRect); setTouchZone(); updatePlayerCell(); } } // end of (CASE) if playerTouch break; } // end of (SWITCH) Case motion }//end of Switch return true; }//end of TouchEvent private void finish() { // TODO Auto-generated method stub } public int getColFromXPos(int xPos) { val = xPos / (pvWidth / mapManager.getCurrentTile().pCols); if (val == mapManager.getCurrentTile().pCols) { val = mapManager.getCurrentTile().pCols - 1; } return val; } /** * Given a y pixel position, return the row of the cell it is in This is * used when determining the type of adjacent Cells. * * @param yPos * y position in pixels * @return The cell this position is in */ public int getRowFromYPos(int yPos) { val = yPos / (pvHeight / mapManager.getCurrentTile().pRows); if (val == mapManager.getCurrentTile().pRows) { val = mapManager.getCurrentTile().pRows - 1; } return val; } /** * When preserving the position we need to know which cell the player is in, * so calculate it from the centre on its Rect */ public void updatePlayerCell() { plCell.x = (playerRect.left + (playerRect.width() / 2)) / (pvWidth / mapManager.getCurrentTile().pCols); plCell.y = (playerRect.top + (playerRect.height() / 2)) / (pvHeight / mapManager.getCurrentTile().pRows); if (mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] == Cell.floor) { for (int row = 0; row < mapManager.getCurrentTile().pRows; row++) { for (int col = 0; col < mapManager.getCurrentTile().pCols; col++) { if (mapManager.getCurrentTile().pMaze[row][col] == Cell.pl) { mapManager.getCurrentTile().pMaze[row][col] = Cell.floor; break; } } } mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] = Cell.pl; } } public Rect getRectFromPos(int x, int y) { calcCell.left = ((x / cellWidth) + 0) * cellWidth; calcCell.right = calcCell.left + cellWidth; calcCell.top = ((y / cellHeight) + 0) * cellHeight; calcCell.bottom = calcCell.top + cellHeight; Log.d(TAG, "Rect: " + calcCell + " Player: " + playerRect); return calcCell; } public void setPlayerRect(Rect newplRect) { playerRect.set(newplRect); } private void setTouchZone() { playerTouchRect.set( playerRect.left - playerRect.width() / TOUCH_ZONE, playerRect.top - playerRect.height() / TOUCH_ZONE, playerRect.right + playerRect.width() / TOUCH_ZONE, playerRect.bottom + playerRect.height() / TOUCH_ZONE); } public Rect getPlayerRect() { return playerRect; } public Point getPlayerCell() { return plCell; } public void setPlayerCell(Point cell) { plCell = cell; }

  Read the article

• Identity in .NET 4.5&ndash;Part 2: Claims Transformation in ASP.NET (Beta 1)

  - by Your DisplayName here!

  In my last post I described how every identity in .NET 4.5 is now claims-based. If you are coming from WIF you might think, great – how do I transform those claims? Sidebar: What is claims transformation? One of the most essential features of WIF (and .NET 4.5) is the ability to transform credentials (or tokens) to claims. During that process the “low level” token details are turned into claims. An example would be a Windows token – it contains things like the name of the user and to which groups he belongs to. That information will be surfaced as claims of type Name and GroupSid. Forms users will be represented as a Name claim (all the other claims that WIF provided for FormsIdentity are gone in 4.5). The issue here is, that your applications typically don’t care about those low level details, but rather about “what’s the purchase limit of alice”. The process of turning the low level claims into application specific ones is called claims transformation. In pre-claims times this would have been done by a combination of Forms Authentication extensibility, role manager and maybe ASP.NET profile. With claims transformation all your identity gathering code is in one place (and the outcome can be cached in a single place as opposed to multiple ones). The structural class to do claims transformation is called ClaimsAuthenticationManager. This class has two purposes – first looking at the incoming (low level) principal and making sure all required information about the user is present. This is your first chance to reject a request. And second – modeling identity information in a way it is relevant for the application (see also here). This class gets called (when present) during the pipeline when using WS-Federation. But not when using the standard .NET principals. I am not sure why – maybe because it is beta 1. Anyhow, a number of people asked me about it, and the following is a little HTTP module that brings that feature back in 4.5. public class ClaimsTransformationHttpModule : IHttpModule {     public void Dispose()     { }     public void Init(HttpApplication context)     {         context.PostAuthenticateRequest += Context_PostAuthenticateRequest;     }     void Context_PostAuthenticateRequest(object sender, EventArgs e)     {         var context = ((HttpApplication)sender).Context;         // no need to call transformation if session already exists         if (FederatedAuthentication.SessionAuthenticationModule != null &&             FederatedAuthentication.SessionAuthenticationModule.ContainsSessionTokenCookie(context.Request.Cookies))         {             return;         }         var transformer = FederatedAuthentication.FederationConfiguration.IdentityConfiguration.ClaimsAuthenticationManager;         if (transformer != null)         {             var transformedPrincipal = transformer.Authenticate(context.Request.RawUrl, context.User as ClaimsPrincipal);             context.User = transformedPrincipal;             Thread.CurrentPrincipal = transformedPrincipal;         }     } } HTH

  Read the article

• Access denied error while mounting a shared folder?

  - by SSH

  I am a linux newbie and I have a very basic question. I have three machines - machineA 10.108.24.132 machineB 10.108.24.133 machineC 10.108.24.134 and all those machines have Ubuntu 12.04 installed in it and I have root access to all those three machines. Now I am supposed to do below things in my above machines - Create mount point /opt/exhibitor/conf Mount the directory in all servers. sudo mount <NFS-SERVER>:/opt/exhibitor/conf /opt/exhibitor/conf/ I have already created /opt/exhibitor/conf directory in all those three machines as mentioned above. Now I am trying to create a Mount Point on all those three machines. So I followed the below process - Install NFS support files and NFS kernel server in all the above three machines $ sudo apt-get install nfs-common nfs-kernel-server Create the shared directory in all the above three machines $ mkdir /opt/exhibitor/conf/ Edited the /etc/exports and added the entry like this in all the above three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.*(rw) Run exportfs in all the above three machines root@machineA:/# exportfs -rv exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "10.108.24.*:/opt/exhibitor/conf/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exporting 10.108.24.*:/opt/exhibitor/conf Now I did showmount on machineA root@machineA:/# showmount -e 10.108.24.132 Export list for 10.108.24.132: /opt/exhibitor/conf 10.108.24.* And also I have started the NFS server like this in all the above three machines - sudo /etc/init.d/nfs-kernel-server start And now when I did this, I am getting an error - root@machineA:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ mount.nfs: access denied by server while mounting 10.108.24.132:/opt/exhibitor/conf I have also tried doing the same thing from machineB and machineC as well and still I get the same error- root@machineB:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ root@machineC:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ Did my /etc/exports file looks good? As I have the same content in all the three machines. And also are there any logs related to NFS which I can see to find any clues? Any idea what wrong I am doing here? UPDATE:- So my etc/exports files would be like this in all the three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.132(rw) /opt/exhibitor/conf/ 10.108.24.133(rw) /opt/exhibitor/conf/ 10.108.24.134(rw) Just a quick check - The IP Address that I am taking for each machine as mentioned above is like this - root@machineB:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:56:ad:5b:a7 inet addr:10.108.24.133 Bcast:10.108.27.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5696812 errors:0 dropped:12462 overruns:0 frame:0 TX packets:5083427 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7904369145 (7.9 GB) TX bytes:601844910 (601.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187144 errors:0 dropped:0 overruns:0 frame:0 TX packets:187144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:24012302 (24.0 MB) TX bytes:24012302 (24.0 MB) Here the IP Address that I am taking for machineB is 10.108.24.133.

  Read the article

• Using Unity – Part 4

  - by nmarun

  In this part, I’ll be discussing about constructor and property or setter injection. I’ve created a new class – Product3: 1: public class Product3 : IProduct 2: { 3: public string Name { get; set; } 4: [Dependency] 5: public IDistributor Distributor { get; set; } 6: public ILogger Logger { get; set; } 7:  8: public Product3(ILogger logger) 9: { 10: Logger = logger; 11: Name = "Product 1"; 12: } 13:  14: public string WriteProductDetails() 15: { 16: StringBuilder productDetails = new StringBuilder(); 17: productDetails.AppendFormat("{0}<br/>", Name); 18: productDetails.AppendFormat("{0}<br/>", Logger.WriteLog()); 19: productDetails.AppendFormat("{0}<br/>", Distributor.WriteDistributorDetails()); 20: return productDetails.ToString(); 21: } 22: } This version has a property of type IDistributor and takes a constructor parameter of type ILogger. The IDistributor property has a Dependency attribute (Microsoft.Practices.Unity namespace) applied to it. IDistributor and its implementation are shown below: 1: public interface IDistributor 2: { 3: string WriteDistributorDetails(); 4: } 5:  6: public class Distributor : IDistributor 7: { 8: public List<string> DistributorNames = new List<string>(); 9:  10: public Distributor() 11: { 12: DistributorNames.Add("Distributor1"); 13: DistributorNames.Add("Distributor2"); 14: DistributorNames.Add("Distributor3"); 15: DistributorNames.Add("Distributor4"); 16: } 17: public string WriteDistributorDetails() 18: { 19: StringBuilder distributors = new StringBuilder(); 20: for (int i = 0; i < DistributorNames.Count; i++) 21: { 22: distributors.AppendFormat("{0}<br/>", DistributorNames[i]); 23: } 24: return distributors.ToString(); 25: } 26: } ILogger and the FileLogger have the following definition: 1: public interface ILogger 2: { 3: string WriteLog(); 4: } 5:  6: public class FileLogger : ILogger 7: { 8: public string WriteLog() 9: { 10: return string.Format("Type: {0}", GetType()); 11: } 12: } The Unity container creates an instance of the dependent class (the Distributor class) within the scope of the target object (an instance of Product3 class that will be called by doing a Resolve<IProduct>() in the calling code) and assign this dependent object to the attributed property of the target object. To add to it, property injection is a form of optional injection of dependent objects.The dependent object instance is generated before the container returns the target object. Unlike constructor injection, you must apply the appropriate attribute in the target class to initiate property injection. Let’s see how to change the config file to make this work. The first step is to add all the type aliases: 1: <typeAlias alias="Product3" type="ProductModel.Product3, ProductModel"/> 2: <typeAlias alias="ILogger" type="ProductModel.ILogger, ProductModel"/> 3: <typeAlias alias="FileLogger" type="ProductModel.FileLogger, ProductModel"/> 4: <typeAlias alias="IDistributor" type="ProductModel.IDistributor, ProductModel"/> 5: <typeAlias alias="Distributor" type="ProductModel.Distributor, ProductModel"/> Now define mappings for these aliases: 1: <type type="ILogger" mapTo="FileLogger" /> 2: <type type="IDistributor" mapTo="Distributor" /> Next step is to define the constructor and property injection in the config file: 1: <type type="IProduct" mapTo="Product3" name="ComplexProduct"> 2: <typeConfig extensionType="Microsoft.Practices.Unity.Configuration.TypeInjectionElement, Microsoft.Practices.Unity.Configuration"> 3: <constructor> 4: <param name="logger" parameterType="ILogger" /> 5: </constructor> 6: <property name="Distributor" propertyType="IDistributor"> 7: <dependency /> 8: </property> 9: </typeConfig> 10: </type> There you see a constructor element that tells there’s a property named ‘logger’ that is of type ILogger. By default, the type of ILogger gets resolved to type FileLogger. There’s also a property named ‘Distributor’ which is of type IDistributor and which will get resolved to type Distributor. On the calling side, I’ve added a new button, whose click event does the following: 1: protected void InjectionButton_Click(object sender, EventArgs e) 2: { 3: unityContainer.RegisterType<IProduct, Product3>(); 4: IProduct product3 = unityContainer.Resolve<IProduct>(); 5: productDetailsLabel.Text = product3.WriteProductDetails(); 6: } This renders the following output: This completes the part for constructor and property injection. In the next blog, I’ll talk about Arrays and Generics. Please see the code used here.

  Read the article

• Why do my pyramids fade black and then back to colour again

  - by geminiCoder

  I have the following vertecies and norms GLfloat verts[36] = { -0.5, 0, 0.5, 0, 0, -0.5, 0.5, 0, 0.5, 0, 0, -0.5, 0.5, 0, 0.5, 0, 1, 0, -0.5, 0, 0.5, 0, 0, -0.5, 0, 1, 0, 0.5, 0, 0.5, -0.5, 0, 0.5, 0, 1, 0 }; GLfloat norms[36] = { 0, -1, 0, 0, -1, 0, 0, -1, 0, -1, 0.25, 0.5, -1, 0.25, 0.5, -1, 0.25, 0.5, 1, 0.25, -0.5, 1, 0.25, -0.5, 1, 0.25, -0.5, 0, -0.5, -1, 0, -0.5, -1, 0, -0.5, -1 }; I am writing my fists Open GL game, But I need to know for sure if my Normals are correct as the colours aren't rendering correctly. my Pyramids are coloured then fade to black every half rotation then back again. My app so far is based on the boiler plate code provided by apple. heres my modified setUp Method [EAGLContext setCurrentContext:self.context]; [self loadShaders]; self.effect = [[GLKBaseEffect alloc] init]; self.effect.light0.enabled = GL_TRUE; self.effect.light0.diffuseColor = GLKVector4Make(1.0f, 0.4f, 0.4f, 1.0f); glEnable(GL_DEPTH_TEST); glGenVertexArraysOES(1, &_vertexArray); //create vertex array glBindVertexArrayOES(_vertexArray); glGenBuffers(1, &_vertexBuffer); glBindBuffer(GL_ARRAY_BUFFER, _vertexBuffer); glBufferData(GL_ARRAY_BUFFER, sizeof(verts) + sizeof(norms), NULL, GL_STATIC_DRAW); //create vertex buffer big enough for both verts and norms and pass NULL as data.. uint8_t *ptr = (uint8_t *)glMapBufferOES(GL_ARRAY_BUFFER, GL_WRITE_ONLY_OES); //map buffer to pass data to it memcpy(ptr, verts, sizeof(verts)); //copy verts memcpy(ptr+sizeof(verts), norms, sizeof(norms)); //copy norms to position after verts glUnmapBufferOES(GL_ARRAY_BUFFER); glEnableVertexAttribArray(GLKVertexAttribPosition); glVertexAttribPointer(GLKVertexAttribPosition, 3, GL_FLOAT, GL_FALSE, 0, BUFFER_OFFSET(0)); //tell GL where verts are in buffer glEnableVertexAttribArray(GLKVertexAttribNormal); glVertexAttribPointer(GLKVertexAttribNormal, 3, GL_FLOAT, GL_FALSE, 0, BUFFER_OFFSET(sizeof(verts))); //tell GL where norms are in buffer glBindVertexArrayOES(0); And the update method. - (void)update { float aspect = fabsf(self.view.bounds.size.width / self.view.bounds.size.height); GLKMatrix4 projectionMatrix = GLKMatrix4MakePerspective(GLKMathDegreesToRadians(65.0f), aspect, 0.1f, 100.0f); self.effect.transform.projectionMatrix = projectionMatrix; GLKMatrix4 baseModelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -4.0f); baseModelViewMatrix = GLKMatrix4Rotate(baseModelViewMatrix, _rotation, 0.0f, 1.0f, 0.0f); // Compute the model view matrix for the object rendered with GLKit GLKMatrix4 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, -1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); self.effect.transform.modelviewMatrix = modelViewMatrix; // Compute the model view matrix for the object rendered with ES2 modelViewMatrix = GLKMatrix4MakeTranslation(0.0f, 0.0f, 1.5f); modelViewMatrix = GLKMatrix4Rotate(modelViewMatrix, _rotation, 1.0f, 1.0f, 1.0f); modelViewMatrix = GLKMatrix4Multiply(baseModelViewMatrix, modelViewMatrix); _normalMatrix = GLKMatrix3InvertAndTranspose(GLKMatrix4GetMatrix3(modelViewMatrix), NULL); _modelViewProjectionMatrix = GLKMatrix4Multiply(projectionMatrix, modelViewMatrix); _rotation += self.timeSinceLastUpdate * 0.5f; } But providing I understand this correct one pyramid is using the GLKit base effect shaders and the other the shaders which are included in the project. So for both of them to have the same error, I thought it would be the Norms?

  Read the article

• Questions to ask to ensure someone understands programming? (and iOS)

  - by Stephen J

  So, I've been tutoring my friend for 2 years. Most people learn programming on their own in 3-6 months, (sans algorithms). It's confusing 'cause he'll run anywhere I tell him to, understands how to read C and C++ honestly better than the average college student, and he'll modify and repeat anything I do... but for the love of god he doesn't move on to new things and he still has test anxiety. I've recently realized he's copied and toyed with existing, but not once gained an understanding of why. I was under the impression he was learning fast because he could write it, but when you say "Make a function that takes an NSString" and he says "How?" and I say "The same way you make ANY function that takes any parameter, NSString is just a type like int" and all I hear is "No, it's an NSString, it's a special thing." and we get into an arguing match 'cause I'm like "It's just a class like any other class, you've used them for months now" and blah... I've subconsciously avoided comprehension questions because of this. Anyway, if you have him copy a program and say "Just initialize it" "Where?" "I don't care, didLoad or initWithCoder or Awake from nib, anywhere it gets initialized" and "No, it has to be exactly where you had it!" "No it doesn't!" I'm sick of this, but he won't give up. So I'm done avoiding these yelling matches and becoming a sadist from now on. I would like some help in finding questions to ask him that force him to understand what he's doing. I'd like some help and any resources I can find. CQuestions looked like a good site, but now I need some iPhone stuff. For example: *What do properties do? How are they changed? How do you change the name of the getter? *Why are Booleans inefficent? What advantage does int have over a boolean and how does the bit-shift operator help? *What does Copy do to a string? *What's the difference between a view controller and a uiview? *Write a program from memory that displays blah on screen, and flashes each view one by one. From beginner up to intermediate, hobbyist with some algebra at most. I'm just looking for resources to work with. I left in backstory so you know to "twist" the questions so he doesn't know he's supposed to init a variable here or there, but has to figure it out, and learn why it goes "here" or that "anywhere is fine as long as it's". Sample programs, anything. I'm relatively open about this because, being a programmer, I seriously doubt he's the only one who has this issue. I'd like to know how others have overcome similar. What made things "click"? for you? Did you have a hard time finding answers on Google, and how did you learn a better way to find what you were looking for? (He's so exact, he'll search for how to write a checkers program with color X and Y inside a uiview, as his search string, instead of breaking it up into components, I need help with that too, and believe it is related). This type of problem has to remind one of us of someone they know. So, Exercises to force them to think? Ways we overcame this thing in the past? I greatly appreciate any help.

  Read the article

• Bounding Box Collision Glitching Problem (Pygame)

  - by Ericson Willians

  So far the "Bounding Box" method is the only one that I know. It's efficient enough to deal with simple games. Nevertheless, the game I'm developing is not that simple anymore and for that reason, I've made a simplified example of the problem. (It's worth noticing that I don't have rotating sprites on my game or anything like that. After showing the code, I'll explain better). Here's the whole code: from pygame import * DONE = False screen = display.set_mode((1024,768)) class Thing(): def __init__(self,x,y,w,h,s,c): self.x = x self.y = y self.w = w self.h = h self.s = s self.sur = Surface((64,48)) draw.rect(self.sur,c,(self.x,self.y,w,h),1) self.sur.fill(c) def draw(self): screen.blit(self.sur,(self.x,self.y)) def move(self,x): if key.get_pressed()[K_w] or key.get_pressed()[K_UP]: if x == 1: self.y -= self.s else: self.y += self.s if key.get_pressed()[K_s] or key.get_pressed()[K_DOWN]: if x == 1: self.y += self.s else: self.y -= self.s if key.get_pressed()[K_a] or key.get_pressed()[K_LEFT]: if x == 1: self.x -= self.s else: self.x += self.s if key.get_pressed()[K_d] or key.get_pressed()[K_RIGHT]: if x == 1: self.x += self.s else: self.x -= self.s def warp(self): if self.y < -48: self.y = 768 if self.y > 768 + 48: self.y = 0 if self.x < -64: self.x = 1024 + 64 if self.x > 1024 + 64: self.x = -64 r1 = Thing(0,0,64,48,1,(0,255,0)) r2 = Thing(6*64,6*48,64,48,1,(255,0,0)) while not DONE: screen.fill((0,0,0)) r2.draw() r1.draw() # If not intersecting, then moves, else, it moves in the opposite direction. if not ((((r1.x + r1.w) > (r2.x - r1.s)) and (r1.x < ((r2.x + r2.w) + r1.s))) and (((r1.y + r1.h) > (r2.y - r1.s)) and (r1.y < ((r2.y + r2.h) + r1.s)))): r1.move(1) else: r1.move(0) r1.warp() if key.get_pressed()[K_ESCAPE]: DONE = True for ev in event.get(): if ev.type == QUIT: DONE = True display.update() quit() The problem: In my actual game, the grid is fixed and each tile has 64 by 48 pixels. I know how to deal with collision perfectly if I moved by that size. Nevertheless, obviously, the player moves really fast. In the example, the collision is detected pretty well (Just as I see in many examples throughout the internet). The problem is that if I put the player to move WHEN IS NOT intersecting, then, when it touches the obstacle, it does not move anymore. Giving that problem, I began switching the directions, but then, when it touches and I press the opposite key, it "glitches through". My actual game has many walls, and the player will touch them many times, and I can't afford letting the player go through them. The code-problem illustrated: When the player goes towards the wall (Fine). When the player goes towards the wall and press the opposite direction. (It glitches through). Here is the logic I've designed before implementing it: I don't know any other method, and I really just want to have walls fixed in a grid, but move by 1 or 2 or 3 pixels (Slowly) and have perfect collision without glitching-possibilities. What do you suggest?

  Read the article

• Login via XDMCP not possible to 12.04 from Squeeze box

  - by Joysn

  Can anybody tell me whats wrong with my 12.04/lightdm/XDMCP setup? i activated X11 remote via tcp and XDMCP on lightdm and restarted lightdm: [SeatDefaults] user-session=ubuntu greeter-session=unity-greeter xserver-allow-tcp=true [XDMCPServer] enabled=true whenever i try to login to the remove lightdm via Xephyr Xephyr -query <remote ip> :10 i get the following trace: SELinux: Disabled on system, not enabling in X server [dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. Ignoring device from udev. *** glibc detected *** Xephyr: free(): corrupted unsorted chunks: 0x08659088 *** ======= Backtrace: ========= /lib/i686/cmov/libc.so.6(+0x6af71)[0xb72b6f71] /lib/i686/cmov/libc.so.6(+0x6c7c8)[0xb72b87c8] /lib/i686/cmov/libc.so.6(cfree+0x6d)[0xb72bb8ad] Xephyr(Xfree+0x21)[0x81ddcd1] Xephyr(SrvXkbResizeKeyType+0x59e)[0x81ca01e] Xephyr[0x81ab8eb] Xephyr[0x81ac8c2] Xephyr[0x8088807] Xephyr[0x807c16a] /lib/i686/cmov/libc.so.6(__libc_start_main+0xe6)[0xb7262ca6] Xephyr[0x8061081] ======= Memory map: ======== 08048000-08204000 r-xp 00000000 fd:00 1148994 /usr/bin/Xephyr 08204000-08210000 rw-p 001bc000 fd:00 1148994 /usr/bin/Xephyr 08210000-08239000 rw-p 00000000 00:00 0 08496000-087ac000 rw-p 00000000 00:00 0 [heap] b5600000-b5621000 rw-p 00000000 00:00 0 b5621000-b5700000 ---p 00000000 00:00 0 b5762000-b588f000 rw-p 00000000 00:00 0 b588f000-b58b3000 r-xp 00000000 fd:00 50040 /usr/lib/libexpat.so.1.5.2 b58b3000-b58b5000 rw-p 00024000 fd:00 50040 /usr/lib/libexpat.so.1.5.2 b58d0000-b5ae4000 r-xp 00000000 fd:00 1212530 /usr/lib/dri/swrast_dri.so b5ae4000-b5ae9000 rw-p 00214000 fd:00 1212530 /usr/lib/dri/swrast_dri.so b5ae9000-b5af8000 rw-p 00000000 00:00 0 b5af8000-b5c24000 rw-s 00000000 00:04 1420132375 /SYSV00000000 (deleted) b5c24000-b5c28000 r-xp 00000000 fd:00 770089 /usr/lib/libXfixes.so.3.1.0 b5c28000-b5c29000 rw-p 00003000 fd:00 770089 /usr/lib/libXfixes.so.3.1.0 b5c29000-b5c31000 r-xp 00000000 fd:00 772923 /usr/lib/libXrender.so.1.3.0 b5c31000-b5c32000 rw-p 00007000 fd:00 772923 /usr/lib/libXrender.so.1.3.0 b5c32000-b5c3a000 r-xp 00000000 fd:00 49913 /usr/lib/libXcursor.so.1.0.2 b5c3a000-b5c3b000 rw-p 00007000 fd:00 49913 /usr/lib/libXcursor.so.1.0.2 b5c3b000-b5c58000 r-xp 00000000 09:02 466930 /lib/libgcc_s.so.1 b5c58000-b5c59000 rw-p 0001c000 09:02 466930 /lib/libgcc_s.so.1 b5c59000-b5c5b000 rw-p 00000000 00:00 0 b5c5b000-b7121000 r-xp 00000000 fd:00 49164 /usr/lib/libnvidia-glcore.so.256.53 b7121000-b7178000 rwxp 014c6000 fd:00 49164 /usr/lib/libnvidia-glcore.so.256.53 b7178000-b7188000 rwxp 00000000 00:00 0 b7188000-b7189000 r-xp 00000000 fd:00 49193 /usr/lib/tls/libnvidia-tls.so.256.53 b7189000-b718a000 rw-p 00000000 fd:00 49193 /usr/lib/tls/libnvidia-tls.so.256.53 b718a000-b718b000 rw-p 00000000 00:00 0 b718b000-b7190000 r-xp 00000000 fd:00 50172 /usr/lib/libfontenc.so.1.0.0 b7190000-b7191000 rw-p 00005000 fd:00 50172 /usr/lib/libfontenc.so.1.0.0 b7191000-b71a1000 r-xp 00000000 09:02 466849 /lib/libbz2.so.1.0.4 b71a1000-b71a2000 rw-p 00010000 09:02 466849 /lib/libbz2.so.1.0.4 b71a2000-b71b5000 r-xp 00000000 fd:00 52002 /usr/lib/libz.so.1.2.3.4 b71b5000-b71b6000 rw-p 00013000 fd:00 52002 /usr/lib/libz.so.1.2.3.4 b71b6000-b722a000 r-xp 00000000 fd:00 51162 /usr/lib/libfreetype.so.6.6.0 b722a000-b722e000 rw-p 00073000 fd:00 51162 /usr/lib/libfreetype.so.6.6.0 b722e000-b7246000 r-xp 00000000 fd:00 49652 /usr/lib/libxcb.so.1.1.0 b7246000-b7247000 rw-p 00017000 fd:00 49652 /usr/lib/libxcb.so.1.1.0 b7247000-b7248000 rw-p 00000000 00:00 0 b7248000-b724b000 r-xp 00000000 fd:00 54148 /usr/lib/libgpg-error.so.0.4.0 b724b000-b724c000 rw-p 00002000 fd:00 54148 /usr/lib/libgpg-error.so.0.4.0 b724c000-b738c000 r-xp 00000000 09:02 467095 /lib/i686/cmov/libc-2.11.3.so

  Read the article

• What's new in Servlet 3.1 ? - Java EE 7 moving forward

  - by arungupta

  Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

  Read the article

• Why is the framerate (fps) capped at 60?

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

  Read the article

• Application using JOGL stays in Limbo when closing

  - by Roy T.

  I'm writing a game using Java and OpenGL using the JOGL bindings. I noticed that my game doesn't terminate properly when closing the window even though I've set the closing operation of the JFrame to EXIT_ON_CLOSE. I couldn't track down where the problem was so I've made a small reproduction case. Note that on some computers the program terminates normally when closing the window but on other computers (notably my own) something in the JVM keeps lingering, this causes the JFrame to never be disposed and the application to never exit. I haven't found something in common between the computers that had difficulty terminating. All computers had Windows 7, Java 7 and the same version of JOGL and some terminated normally while others had this problem. The test case is as follows: public class App extends JFrame implements GLEventListener { private GLCanvas canvas; @Override public void display(GLAutoDrawable drawable) { GL3 gl = drawable.getGL().getGL3(); gl.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); gl.glClear(GL3.GL_COLOR_BUFFER_BIT); gl.glFlush(); } // The overrides for dispose (the OpenGL one), init and reshape are empty public App(String title, boolean full_screen, int width, int height) { //snipped setting the width and height of the JFRAME GLProfile profile = GLProfile.get(GLProfile.GL3); GLCapabilities capabilities = new GLCapabilities(profile); canvas = new GLCanvas(capabilities); canvas.addGLEventListener(this); canvas.setSize(getWidth(), getHeight()); add(canvas); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //!!! setVisible(true); } @Override public void dispose() { System.out.println("HELP"); // } public static void main( String[] args ) { new App("gltut 01", false, 1280, 720); } } As you can see this doesn't do much more than adding a GLCanvas to the frame and registering the main class as the GLEventListener. So what keeps lingering? I'm not sure. I've made some screenshots. The application running normally. The application after the JFrame is closed, note that the JVM still hasn't exited or printed a return code. The application after it was force closed. Note the return code -1, so it wasnt just the JVM standing by or something the application really hadn't exited yet. So what is keeping the application in Limbo? Might it be the circular reference between the GLCanvas and the JFrame? I thought the GC could figure that out. If so how should I deal with that when I want to exit? Is there any other clean-up required when using JOGL? I've tried searching but it doesn't seem to be necessary. Edit, to clarify: there are 2 dispose functions dispose(GLAutoDrawable arg) which is a member of GLEventListener and dispose() which is a member of JFrame. The first one is called correctly (but I wouldn't know what to there, destroying the GLAutoDrawable or the GLCanvas gives an infinite exception loop) the second one is never called.

  Read the article

• SDL Bullet Movement

  - by Code Assasssin

  I'm currently working on my first space shooter, and I'm in the process of making my ship shoot some bullets/lasers. Unfortunately, I'm having a hard time getting the bullets to fly vertically. I'm a total noob when it comes to this so you might have a hard time understanding my code :/ // Position Bullet Function projectilex = x + 17; projectiley = y + -20; if(keystates[SDLK_SPACE]) { alive = true; } And here's my show function if(alive) { if(frame == 2) { frame = 0; } apply_surface(projectilex,projectiley,ShootStuff,screen,&lazers[frame]); frame++; projectiley + 1; } I'm trying to get the bullet to fly vertically... and I have no clue how to do that. I've tried messing with the y coordinate but that makes things worse. The laser/bullet just follows the ship :( How would I get it to fire at the starting position and keep going in a vertical line without it following the ship? int main( int argc, char* args[] ) { Player p; Timer fps; bool quit = false; if( init() == false ) { return 1; } //Load the files if( load_files() == false ) { return 1; } clip[ 0 ].x = 0; clip[ 0 ].y = 0; clip[ 0 ].w = 30; clip[ 0 ].h = 36; clip[ 1 ].x = 31; clip[ 1 ].y = 0; clip[ 1 ].w = 39; clip[ 1 ].h = 36; clip[ 2 ].x = 71; clip[ 2 ].y = 0; clip[ 2 ].w = 29; clip[ 2 ].h = 36; lazers [ 0 ].x = 0; lazers [ 0 ].y = 0; lazers [ 0 ].w = 3; lazers [ 0 ].h = 9; lazers [ 1 ].x = 5; lazers [ 1 ].y = 0; lazers [ 1 ].w = 3; lazers [ 1 ].h = 7; while( quit == false ) { fps.start(); //While there's an event to handle while( SDL_PollEvent( &event ) ) { p.handle_input(); //If a key was pressed //If the user has Xed out the window if( event.type == SDL_QUIT ) { //Quit the program quit = true; } } //Scroll background bgX -= 8; //If the background has gone too far if( bgX <= -GameBackground->w ) { //Reset the offset bgX = 0; } p.move(); apply_surface( bgX, bgY,GameBackground, screen ); apply_surface( bgX + GameBackground->w, bgY, GameBackground, screen ); apply_surface(0,0, FullHealthBar,screen); p.shoot(); p.show(); //Apply the message //Update the screen if( SDL_Flip( screen ) == -1 ) { return 1; } SDL_Flip(GameBackground); if( fps.get_ticks() < 1000 / FRAMES_PER_SECOND ) { SDL_Delay( ( 1000 / FRAMES_PER_SECOND ) - fps.get_ticks() ); } } //Clean up clean_up(); return 0; }

  Read the article

• ORA-4031 Troubleshooting Tool ???

  - by Takeyoshi Sasaki

  ORA-4031 ???????????????????? SGA ????????????(??????)??????????????????????????????????????????????????? ORA-4031 ??????????????????? ORA-4031 Troubleshooting Tool ??????????? ORA-4031 Troubleshooting Tool ?? ORA-4031 Troubleshooting Tool ? ORA-4031 ????????? ORA-4031 ???????????????????????????????????WEB????????????????????????????????My Oracle Support ??????????????????????? ORA-4031 ??????????????????????????????ORA-4031 ?????????????????????????????? ORA-4031 Troubleshooting Tool ???????? My Oracle Support ?????? Diagnostic Tools Catalog ??  ORA-4031 Troubleshooting Tool ???????????????? ORA-4031 Troubleshooting Tool ??????????????? ORA-4031 Troubleshooting Tool ????? ???2??????????????? ORA-4031 ?????????????????????????????ORA-4031 Troubleshooting Tool ????????????????????????????????????????ORA-4031 ???????????????????? ??????????????? ORA-4031???????????? ????????????? ORA-4031 ?????? AWR???????????????????????????????????????????????????????????? ????·???????·???????????? ORA-4031 ?????????? ????????? SR ?????????????????????????? [ADR] ????·??????·?????????? [10g ???] AWR?????(STATSPACK????)???? ?????????? ORA-4031 ????????????????????????????????????????????? ORA-4031 ?????????????? ORA-4031 ??????1?1??????????? ORA-4031 Troubleshooting Tool ???????????(??????????????)???????? ORA-4031 ????????? ???????????????????????????????????????????????? ??????????????????????????????????????1)High Session_Cached_Cursor Setting Causing Excessive Consumption of Shared Pool???SESSION_CACHED_CURSOR ??????????????????????????????????????????????2)Insufficient SGA Free Memory at StartupThis issue could occur if in the init.ora parameters of your Alert log, (shared_pool_size + large_pool_size + java_pool_size + db_keep_cache_size + streams_pool_size + db_cache_size) / sga_target is greater than 90%.????????????????????????? ?????????????? shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size, db_cache_size ????? /sga_target ??? 90% ??????????????????sga_target ??? memory_target ??????????????????????????????????????????????????????????????????? shared_pool_size ???????????????????????????????????????????????????????????????????????(?????????)? sga_target ????????????????????????????????????????????????????????????? ?????????????????????????????????????????????1)In your Alert log,* Look for parameters under "System parameters with non-default values:". If session_cached_cursor * 2000 / shared_pool_size is greater than 10%, then session_cached_cursors are consuming significant shared_pool_size.??? ????????????? "System parameters with non-default values:" ????  session_cached_cursor * 2000 ??? shared_pool_size ? 10% ???????????????????????? ???2) In your Alert log, SGA Utilization (Sum of shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size and db_cache_size over sga_target) is 99%, which might be too high. ??? shared_pool_size, large_pool_size, java_pool_size, db_keep_cache_size, streams_pool_size and db_cache_size ???? sga_target ? 99% ???????????????????? ?????????????????????????????? My Oracle Support ??????????????????????????1)Decrease the parameter SESSION_CACHED_CURSORSSESSION_CACHED_CURSORS ???????????????????????2)Reduce the minimum values for the dynamic SGA components to allow memory manager to make changes as neededSGA ?????????????????(???)?????????????????? 2????????????????????? ORA-4031 Trobuleshooting Tool ????????????????????????????????????????? ORA-4031 Troubleshooting Tool ?????? ORA-4031 ??????????????????????ORA-4031 Troubleshooting Tool ???????????????????????????????????????????????????????ORA-4031 ????????????????????????????ORA-4031 ??????????????? ORA-4031 Troubleshooting Tool ?????????

  Read the article

• Redundant Interconnect with Highly Available IP (HAIP) ??

  - by JaneZhang(???)

    ?11.2.0.2??,Oracle ?????Grid Infrastructure(GI)????Redundant Interconnect with Highly Available IP(HAIP).  ?11.2.0.2??,???????????OS?????????,??HAIP??,?????????????????????  ???GI????,??????????????????,??:   ???,HAIP???????169.254.*.*,????????????HAIP ???1?,???4?(???????),???????????  ??:$ crsctl stat res -t -init NAME           TARGET  STATE        SERVER   STATE_DETAILS Cluster Resources--------------------------------------------------------------------------------ora.cluster_interconnect.haip       1        ONLINE  ONLINE       node2                       #ifconfig -aeth1      Link encap:Ethernet  HWaddr 00:14:22:BD:59:DE  <=====????          inet addr:192.168.10.2  Bcast:192.168.10.255  Mask:255.255.255.0          inet6 addr: fe80::214:22ff:febd:59de/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:54297359 errors:0 dropped:0 overruns:0 frame:0          TX packets:58151488 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:1000           RX bytes:837602539 (798.8 MiB)  TX bytes:3809085161 (3.5 GiB)          Interrupt:169 eth1:1    Link encap:Ethernet  HWaddr 00:14:22:BD:59:DE  <=====????????          inet addr:169.254.185.195  Bcast:169.254.255.255  Mask:255.255.0.0          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          Interrupt:169 ???????HAIP??cluster interconnect: Cluster communication is configured to use the following interface(s) for this instance  169.254.185.195cluster interconnect IPC version:Oracle UDP/IP (generic)IPC Vendor 1 proto 2ASM ?????? HAIP ??cluster interconnect: Cluster communication is configured to use the following interface(s) for this instance  169.254.185.195cluster interconnect IPC version:Oracle UDP/IP (generic)IPC Vendor 1 proto 2  Oracle????ASM??????HAIP??????????????????????,????????????????????,???????????,????HAIP????????????????,???????????  HAIP ????????????,?????????????????   ??HAIP?????,???My Oracle Support Note ??1210883.1.

  Read the article

• Core Data managed object context thread synchronisation

  - by Ben Reeves

  I'm have an issue where i'm updating a many-to-many relationship in a background thread, which works fine in that threa, but when I send the object back to the main thread the changes do not show. If I close the app and reopen the data is saved fine and the changes show on the main thread. Also using [context lock] instead of a different managed object context works fine. I have tried NSManagedObjectContext: - (BOOL)save:(NSError **)error; - (void)refreshObject:(NSManagedObject *)object mergeChanges:(BOOL)flag; at different stages throughout the process but it doesn't seem to help. My core data code uses the following getter to ensure any operations are thread safe: - (NSManagedObjectContext *) managedObjectContext { NSThread * thisThread = [NSThread currentThread]; if (thisThread == [NSThread mainThread]) { //Main thread just return default context return managedObjectContext; } else { //Thread safe trickery NSManagedObjectContext * threadManagedObjectContext = [[thisThread threadDictionary] objectForKey:CONTEXT_KEY]; if (threadManagedObjectContext == nil) { threadManagedObjectContext = [[[NSManagedObjectContext alloc] init] autorelease]; [threadManagedObjectContext setPersistentStoreCoordinator: [self persistentStoreCoordinator]]; [[thisThread threadDictionary] setObject:threadManagedObjectContext forKey:CONTEXT_KEY]; } return threadManagedObjectContext; } } and when I pass object between threads i'm using -(NSManagedObject*)makeSafe:(NSManagedObject*)object { if ([object managedObjectContext] != [self managedObjectContext]) { NSError * error = nil; object = [[self managedObjectContext] existingObjectWithID:[object objectID] error:&error]; if (error) { NSLog(@"Error makeSafe: %@", error); } } return object; } Any help appreciated

  Read the article

• Android ADT Eclipse plugin, parseSDKContent failed

  - by Sebastian Ganslandt

  I've just set up my first Android development environment consisting of Eclipse 3.5 Mac OSX 10.5 Android SDK for x86 macs ADT Eclipse plugin 0.9.6 I've set set $PATH to my SDK/tools directory (which shouldn't matter if I only use Eclipse right?) and started Eclipse, but when I try to set the path to the SDK in Eclipse, i get the error "parseSdkContent failed". The stack trace of from the thrown exception is java.lang.IllegalArgumentException: http://www.w3.org/2001/XMLSchema at javax.xml.validation.SchemaFactory.newInstance(SchemaFactory.java:181) at com.android.ide.eclipse.adt.internal.sdk.LayoutDevicesXsd.getValidator(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.parseLayoutDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.loadDefaultLayoutDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.loadDefaultAndUserDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.Sdk.<init>(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.Sdk.loadSdk(Unknown Source) at com.android.ide.eclipse.adt.AdtPlugin$13.run(Unknown Source) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) I can't see that I've missed anything in the setup process, according to the instructions it should basically just work out of the box. Any ideas as to why this might fail?

  Read the article

• Parsing nested JSON objects with JSON Framework for Objective-C

  - by Sheehan Alam

  I have the following JSON object: { "response": { "status": 200 }, "messages": [ { "message": { "user": "value" "pass": "value", "url": "value" } ] } } I am using JSON-Framework (also tried JSON Touch) to parse through this and create a dictionary. I want to access the "message" block and pull out the "user", "pass" and "url" values. In Obj-C I have the following code: // Create new SBJSON parser object SBJSON *parser = [[SBJSON alloc] init]; // Prepare URL request to download statuses from Twitter NSURLRequest *request = [NSURLRequest requestWithURL:[NSURL URLWithString:myURL]]; // Perform request and get JSON back as a NSData object NSData *response = [NSURLConnection sendSynchronousRequest:request returningResponse:nil error:nil]; // Get JSON as a NSString from NSData response NSString *json_string = [[NSString alloc] initWithData:response encoding:NSUTF8StringEncoding]; //Print contents of json-string NSArray *statuses = [parser objectWithString:json_string error:nil]; NSLog(@"Array Contents: %@", [statuses valueForKey:@"messages"]); NSLog(@"Array Count: %d", [statuses count]); NSDictionary *results = [json_string JSONValue]; NSArray *tweets = [[results objectForKey:@"messages"] objectForKey:@"message"]; for (NSDictionary *tweet in tweets) { NSString *url = [tweet objectForKey:@"url"]; NSLog(@"url is: %@",url); } I can pull out "messages" and see all of the "message" blocks, but I am unable to parse deeper and pull out the "user", "pass", and "url".

  Read the article

• SSH / SFTP connection issue using Tamir.SharpSsh

  - by jinsungy

  This is my code to connect and send a file to a remote SFTP server. public static void SendDocument(string fileName, string host, string remoteFile, string user, string password) { Scp scp = new Scp(); scp.OnConnecting += new FileTansferEvent(scp_OnConnecting); scp.OnStart += new FileTansferEvent(scp_OnProgress); scp.OnEnd += new FileTansferEvent(scp_OnEnd); scp.OnProgress += new FileTansferEvent(scp_OnProgress); try { scp.To(fileName, host, remoteFile, user, password); } catch (Exception e) { throw e; } } I can successfully connect, send and receive files using CoreFTP. Thus, the issue is not with the server. When I run the above code, the process seems to stop at the scp.To method. It just hangs indefinitely. Anyone know what might my problem be? Maybe it has something to do with adding the key to the a SSH Cache? If so, how would I go about this? EDIT: I inspected the packets using wireshark and discovered that my computer is not executing the Diffie-Hellman Key Exchange Init. This must be the issue. EDIT: I ended up using the following code. Note, the StrictHostKeyChecking was turned off to make things easier. JSch jsch = new JSch(); jsch.setKnownHosts(host); Session session = jsch.getSession(user, host, 22); session.setPassword(password); System.Collections.Hashtable hashConfig = new System.Collections.Hashtable(); hashConfig.Add("StrictHostKeyChecking", "no"); session.setConfig(hashConfig); try { session.connect(); Channel channel = session.openChannel("sftp"); channel.connect(); ChannelSftp c = (ChannelSftp)channel; c.put(fileName, remoteFile); c.exit(); } catch (Exception e) { throw e; } Thanks.

  Read the article

• Stack Overflow Problem in DotNetNuke

  - by Vivek

  Hi, I'm getting this error message when I try to access my website. Can someone please tell me what is going on? Thanks. V Server Error in '/' Application. Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.] AspDotNetStorefrontExcelWrapper.ExcelToXml.SetLicense() +0 AspDotNetStorefrontCommon.AppLogic.ApplicationStart() +150 AspDotNetStorefrontDNNComponents.AppStart..cctor() +103 [TypeInitializationException: The type initializer for 'AspDotNetStorefrontDNNComponents.AppStart' threw an exception.] AspDotNetStorefrontDNNComponents.AppStart.Execute() +0 AspDotNetStorefront.HttpModules.InitializerModule.System.Web.IHttpModule.Init(HttpApplication context) +42 System.Web.HttpApplication.InitModulesCommon() +65 System.Web.HttpApplication.InitModules() +43 System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers) +729 System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context) +298 System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context) +107 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +289 Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

  Read the article

• Sqlite Database LEAK FOUND exception in android?

  - by androidbase

  hi all, i am getting this exception in database Leak Found my LOGCAT Shows this: 02-17 17:20:37.857: INFO/ActivityManager(58): Starting activity: Intent { cmp=com.example.brown/.Bru_Bears_Womens_View (has extras) } 02-17 17:20:38.477: DEBUG/dalvikvm(434): GC freed 1086 objects / 63888 bytes in 119ms 02-17 17:20:38.556: ERROR/Database(434): Leak found 02-17 17:20:38.556: ERROR/Database(434): java.lang.IllegalStateException: /data/data/com.example.brown/databases/BRUNEWS_DB_01.db SQLiteDatabase created and never closed 02-17 17:20:38.556: ERROR/Database(434): at android.database.sqlite.SQLiteDatabase.<init>(SQLiteDatabase.java:1694) 02-17 17:20:38.556: ERROR/Database(434): at android.database.sqlite.SQLiteDatabase.openDatabase(SQLiteDatabase.java:738) 02-17 17:20:38.556: ERROR/Database(434): at android.database.sqlite.SQLiteDatabase.openOrCreateDatabase(SQLiteDatabase.java:760) 02-17 17:20:38.556: ERROR/Database(434): at android.database.sqlite.SQLiteDatabase.openOrCreateDatabase(SQLiteDatabase.java:753) 02-17 17:20:38.556: ERROR/Database(434): at android.app.ApplicationContext.openOrCreateDatabase(ApplicationContext.java:473) 02-17 17:20:38.556: ERROR/Database(434): at android.content.ContextWrapper.openOrCreateDatabase(ContextWrapper.java:193) 02-17 17:20:38.556: ERROR/Database(434): at android.database.sqlite.SQLiteOpenHelper.getWritableDatabase(SQLiteOpenHelper.java:98) 02-17 17:20:38.556: ERROR/Database(434): at com.example.brown.Brown_Splash.onCreate(Brown_Splash.java:52) 02-17 17:20:38.556: ERROR/Database(434): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 02-17 17:20:38.556: ERROR/Database(434): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2459) 02-17 17:20:38.556: ERROR/Database(434): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2512) 02-17 17:20:38.556: ERROR/Database(434): at android.app.ActivityThread.access$2200(ActivityThread.java:119) 02-17 17:20:38.556: ERROR/Database(434): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1863) 02-17 17:20:38.556: ERROR/Database(434): at android.os.Handler.dispatchMessage(Handler.java:99) 02-17 17:20:38.556: ERROR/Database(434): at android.os.Looper.loop(Looper.java:123) 02-17 17:20:38.556: ERROR/Database(434): at android.app.ActivityThread.main(ActivityThread.java:4363) 02-17 17:20:38.556: ERROR/Database(434): at java.lang.reflect.Method.invokeNative(Native Method) 02-17 17:20:38.556: ERROR/Database(434): at java.lang.reflect.Method.invoke(Method.java:521) 02-17 17:20:38.556: ERROR/Database(434): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 02-17 17:20:38.556: ERROR/Database(434): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 02-17 17:20:38.556: ERROR/Database(434): at dalvik.system.NativeStart.main(Native Method) how can i solve it??? thanks in advance...

  Read the article

• Set UIImageView Size?

  - by Tronic

  hi, i have following problem: i generate subviews UIView in an UIScrollView including UIImageViews. NSArray *bilder = [[NSArray alloc] initWithObjects:@"lol.jpg", @"lol2.jpg", nil]; NSArray *added = [[NSMutableArray alloc] init]; UIImageView *tmpView; for (NSString *name in bilder) { UIImage *image = [UIImage imageNamed:name]; tmpView = [[UIImageView alloc] initWithImage:image]; tmpView.contentMode = UIViewContentModeScaleAspectFit; tmpView.frame = CGRectMake(0, 0, 300, 300); [added addObject:tmpView]; [tmpView release]; } CGSize framy = mainFrame.frame.size; NSUInteger x = 0; for (UIView *view in added) { [mainFrame addSubview:view]; view.frame = CGRectMake(framy.height * x++, 0, framy.height, framy.width); } mainFrame.scrollEnabled = YES; mainFrame.pagingEnabled = YES; mainFrame.contentSize = CGSizeMake(framy.height * [added count], framy.width); mainFrame.backgroundColor = [UIColor blackColor]; i get image file names out of an array. now i want to resize the imageview to a specific size, but it won't work. any advice? thanks + regards

  Read the article

• PYTHON: ntlm authentication

  - by Svetlana

  Hello!! I'm trying to implement NTLM authentication on IIS (Windows Server 2003) from Windows 7 with python. LAN Manager Authentication Level: Send NTLM response only. Client machine and server are in the same domain. Domain controller (AD) is on another server (also running Windows Server 2003). I recieve 401.1 - Unauthorized: Access is denied due to invalid credentials. Could you please help me find out what is wrong with this code and/or show me the other possible directions to solve this problem (using NTLM or Kerberos)? [python] import sys, httplib, base64, string import urllib2 import win32api import sspi import pywintypes import socket class WindoewNtlmMessageGenerator: def __init__(self,user=None): import win32api,sspi if not user: user = win32api.GetUserName() self.sspi_client = sspi.ClientAuth("NTLM",user) def create_auth_req(self): import pywintypes output_buffer = None error_msg = None try: error_msg, output_buffer = self.sspi_client.authorize(None) except pywintypes.error: return None auth_req = output_buffer[0].Buffer auth_req = base64.encodestring(auth_req) auth_req = string.replace(auth_req,'\012','') return auth_req def create_challenge_response(self,challenge): import pywintypes output_buffer = None input_buffer = challenge error_msg = None try: error_msg, output_buffer = self.sspi_client.authorize(input_buffer) except pywintypes.error: return None response_msg = output_buffer[0].Buffer response_msg = base64.encodestring(response_msg) response_msg = string.replace(response_msg,'\012','') return response_msg fname='request.xml' request = file(fname).read() ip_host = '10.0.3.112' ntlm_gen = WindoewNtlmMessageGenerator() auth_req_msg = ntlm_gen.create_auth_req() auth_req_msg_dec = base64.decodestring(auth_req_msg) auth_req_msg = string.replace(auth_req_msg,'\012','') webservice = httplib.HTTPConnection(ip_host) webservice.putrequest("POST", "/idc/idcplg") webservice.putheader("Content-length", "%d" % len(request)) webservice.putheader('Authorization', 'NTLM'+' '+auth_req_msg) webservice.endheaders() resp = webservice.getresponse() resp.read() challenge = resp.msg.get('WWW-Authenticate') challenge_dec = base64.decodestring(challenge.split()[1]) msg3 = ntlm_gen.create_challenge_response(challenge_dec) webservice = httplib.HTTP(ip_host) webservice.putrequest("POST", "/idc/idcplg?IdcService=LOGIN&Auth=Intranet") webservice.putheader("Host", SHOD) webservice.putheader("Content-length", "%d" % len(request)) webservice.putheader('Authorization', 'NTLM'+' '+msg3) webservice.putheader("Content-type", "text/xml; charset=\"UTF-8\"") webservice.putheader("SOAPAction", "\"\"") webservice.endheaders() webservice.send(request) statuscode, statusmessage, header = webservice.getreply() res = webservice.getfile().read() res_file = file('result.txt','wb') res_file.write(res) res_file.close() [/python] sspi.py is available here: http://www.koders.com/python/fidF3B0061A07CD13BA35FF263E3E45252CFABFAA3B.aspx?s=timer Thanks!

  Read the article

• Spring, JPA, Hibernate, Jetty 7 Integration

  - by Jewel

  Have anyone successfully run any spring and JPA application in jetty 7? I am getting following exception. This application throws no error in jetty 6. INFO [main] org.eclipse.jetty.util.log - Logging to org.slf4j.impl.Log4jLoggerAdapter(org.eclipse.jetty.util.log) via org.eclipse.jetty.util.log.Slf4jLog INFO [main] org.eclipse.jetty.util.log - jetty-7.1.2.v20100523 INFO [main] org.eclipse.jetty.util.log - Deployment monitor G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\contexts at interval 5 INFO [main] org.eclipse.jetty.util.log - Deployment monitor G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\webapps at interval 5 INFO [main] org.eclipse.jetty.util.log - Deployable added: G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\webapps\gwtrpc-spring.war INFO [main] org.eclipse.jetty.util.log - Copying WEB-INF/lib jar:file:/G:/_Java/_Jetty/jetty-distribution-7.1.2.v20100523/webapps/gwtrpc-spring.war!/WEB-INF/lib/ to C:\Documents and Settings\Jewel2\Local Settings\Temp\Jetty_0_0_0_0_8080_gwtrpc.spring.war__gwtrpc.spring__az1wdj\webinf\WEB-INF\lib INFO [main] org.eclipse.jetty.util.log - Copying WEB-INF/classes from jar:file:/G:/_Java/_Jetty/jetty-distribution-7.1.2.v20100523/webapps/gwtrpc-spring.war!/WEB-INF/classes/ to C:\Documents and Settings\Jewel2\Local Settings\Temp\Jetty_0_0_0_0_8080_gwtrpc.spring.war__gwtrpc.spring__az1wdj\webinf\WEB-INF\classes INFO [main] /gwtrpc-spring - Initializing Spring root WebApplicationContext INFO [main] org.springframework.web.context.ContextLoader - Root WebApplicationContext: initialization started INFO [main] org.springframework.web.context.support.XmlWebApplicationContext - Refreshing Root WebApplicationContext: startup date [Thu Jun 10 00:13:32 GMT+06:00 2010]; root of context hierarchy INFO [main] org.springframework.beans.factory.xml.XmlBeanDefinitionReader - Loading XML bean definitions from ServletContext resource [/WEB-INF/applicationContext.xml] INFO [main] org.springframework.beans.factory.support.DefaultListableBeanFactory - Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@467991: defining beans [org.springframework.context.annotation.internalConfigurationAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,greetingServiceImpl,testService,testService2,taskExecutor,dataSource,entityManagerFactory,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,transactionManager,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor#0]; root of factory hierarchy INFO [main] org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor - Initializing ExecutorService 'taskExecutor' INFO [main] org.springframework.jdbc.datasource.DriverManagerDataSource - Loaded JDBC driver: com.mysql.jdbc.Driver INFO [main] org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean - Building JPA container EntityManagerFactory for persistence unit 'gwtrpc-spring-data-source' INFO [main] org.hibernate.cfg.annotations.Version - Hibernate Annotations 3.4.0.GA INFO [main] org.hibernate.cfg.Environment - Hibernate 3.3.1.GA INFO [main] org.hibernate.cfg.Environment - hibernate.properties not found INFO [main] org.hibernate.cfg.Environment - Bytecode provider name : javassist INFO [main] org.hibernate.cfg.Environment - using JDK 1.4 java.sql.Timestamp handling INFO [main] org.hibernate.annotations.common.Version - Hibernate Commons Annotations 3.1.0.GA INFO [main] org.hibernate.ejb.Version - Hibernate EntityManager 3.4.0.GA INFO [main] org.hibernate.ejb.Ejb3Configuration - Processing PersistenceUnitInfo [ name: gwtrpc-spring-data-source ...] INFO [main] org.springframework.beans.factory.support.DefaultListableBeanFactory - Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@467991: defining beans [org.springframework.context.annotation.internalConfigurationAnnotationProcessor,org.springframework.context.annotation.internalAutowiredAnnotationProcessor,org.springframework.context.annotation.internalRequiredAnnotationProcessor,org.springframework.context.annotation.internalCommonAnnotationProcessor,org.springframework.context.annotation.internalPersistenceAnnotationProcessor,greetingServiceImpl,testService,testService2,taskExecutor,dataSource,entityManagerFactory,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,transactionManager,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor#0]; root of factory hierarchy INFO [main] org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor - Shutting down ExecutorService 'taskExecutor' ERROR [main] org.springframework.web.context.ContextLoader - Context initialization failed org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'entityManagerFactory' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1403) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:513) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:450) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:290) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:287) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:189) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:545) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:871) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:423) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:272) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:196) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47) at org.eclipse.jetty.server.handler.ContextHandler.startContext(ContextHandler.java:636) at org.eclipse.jetty.servlet.ServletContextHandler.startContext(ServletContextHandler.java:188) at org.eclipse.jetty.webapp.WebAppContext.startContext(WebAppContext.java:995) at org.eclipse.jetty.server.handler.ContextHandler.doStart(ContextHandler.java:579) at org.eclipse.jetty.webapp.WebAppContext.doStart(WebAppContext.java:381) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.bindings.StandardStarter.processBinding(StandardStarter.java:36) at org.eclipse.jetty.deploy.AppLifeCycle.runBindings(AppLifeCycle.java:182) at org.eclipse.jetty.deploy.DeploymentManager.requestAppGoal(DeploymentManager.java:497) at org.eclipse.jetty.deploy.DeploymentManager.addApp(DeploymentManager.java:135) at org.eclipse.jetty.deploy.providers.ScanningAppProvider$1.fileAdded(ScanningAppProvider.java:61) at org.eclipse.jetty.util.Scanner.reportAddition(Scanner.java:436) at org.eclipse.jetty.util.Scanner.reportDifferences(Scanner.java:349) at org.eclipse.jetty.util.Scanner.scan(Scanner.java:306) at org.eclipse.jetty.util.Scanner.start(Scanner.java:242) at org.eclipse.jetty.deploy.providers.ScanningAppProvider.doStart(ScanningAppProvider.java:136) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.DeploymentManager.startAppProvider(DeploymentManager.java:562) at org.eclipse.jetty.deploy.DeploymentManager.doStart(DeploymentManager.java:212) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.server.Server.doStart(Server.java:209) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.xml.XmlConfiguration$1.run(XmlConfiguration.java:1018) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.jetty.xml.XmlConfiguration.main(XmlConfiguration.java:983) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.jetty.start.Main.invokeMain(Main.java:447) at org.eclipse.jetty.start.Main.start(Main.java:605) at org.eclipse.jetty.start.Main.parseCommandLine(Main.java:238) at org.eclipse.jetty.start.Main.main(Main.java:77) Caused by: javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1093) at org.hibernate.ejb.Ejb3Configuration.addClassesToSessionFactory(Ejb3Configuration.java:871) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:758) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:425) at org.hibernate.ejb.HibernatePersistence.createContainerEntityManagerFactory(HibernatePersistence.java:131) at org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean.createNativeEntityManagerFactory(LocalContainerEntityManagerFactoryBean.java:225) at org.springframework.orm.jpa.AbstractEntityManagerFactoryBean.afterPropertiesSet(AbstractEntityManagerFactoryBean.java:308) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1460) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1400) ... 45 more Caused by: java.lang.ClassNotFoundException: WEB-INF.classes.org.gwtrpcspring.example.server.Person at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Unknown Source) at org.hibernate.util.ReflectHelper.classForName(ReflectHelper.java:135) at org.hibernate.ejb.Ejb3Configuration.classForName(Ejb3Configuration.java:1009) at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1081) ... 53 more WARN [main] org.eclipse.jetty.util.log - Failed startup of context WebAppContext@149f041@149f041/gwtrpc-spring,file:/C:/Documents and Settings/Jewel2/Local Settings/Temp/Jetty_0_0_0_0_8080_gwtrpc.spring.war__gwtrpc.spring__az1wdj/webinf/;jar:file:/G:/_Java/_Jetty/jetty-distribution-7.1.2.v20100523/webapps/gwtrpc-spring.war!/;,G:\_Java\_Jetty\jetty-distribution-7.1.2.v20100523\webapps\gwtrpc-spring.war org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'entityManagerFactory' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1403) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:513) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:450) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:290) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:287) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:189) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:545) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:871) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:423) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:272) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:196) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47) at org.eclipse.jetty.server.handler.ContextHandler.startContext(ContextHandler.java:636) at org.eclipse.jetty.servlet.ServletContextHandler.startContext(ServletContextHandler.java:188) at org.eclipse.jetty.webapp.WebAppContext.startContext(WebAppContext.java:995) at org.eclipse.jetty.server.handler.ContextHandler.doStart(ContextHandler.java:579) at org.eclipse.jetty.webapp.WebAppContext.doStart(WebAppContext.java:381) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.bindings.StandardStarter.processBinding(StandardStarter.java:36) at org.eclipse.jetty.deploy.AppLifeCycle.runBindings(AppLifeCycle.java:182) at org.eclipse.jetty.deploy.DeploymentManager.requestAppGoal(DeploymentManager.java:497) at org.eclipse.jetty.deploy.DeploymentManager.addApp(DeploymentManager.java:135) at org.eclipse.jetty.deploy.providers.ScanningAppProvider$1.fileAdded(ScanningAppProvider.java:61) at org.eclipse.jetty.util.Scanner.reportAddition(Scanner.java:436) at org.eclipse.jetty.util.Scanner.reportDifferences(Scanner.java:349) at org.eclipse.jetty.util.Scanner.scan(Scanner.java:306) at org.eclipse.jetty.util.Scanner.start(Scanner.java:242) at org.eclipse.jetty.deploy.providers.ScanningAppProvider.doStart(ScanningAppProvider.java:136) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.deploy.DeploymentManager.startAppProvider(DeploymentManager.java:562) at org.eclipse.jetty.deploy.DeploymentManager.doStart(DeploymentManager.java:212) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.server.Server.doStart(Server.java:209) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:55) at org.eclipse.jetty.xml.XmlConfiguration$1.run(XmlConfiguration.java:1018) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.jetty.xml.XmlConfiguration.main(XmlConfiguration.java:983) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.jetty.start.Main.invokeMain(Main.java:447) at org.eclipse.jetty.start.Main.start(Main.java:605) at org.eclipse.jetty.start.Main.parseCommandLine(Main.java:238) at org.eclipse.jetty.start.Main.main(Main.java:77) Caused by: javax.persistence.PersistenceException: [PersistenceUnit: gwtrpc-spring-data-source] class or package not found at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1093) at org.hibernate.ejb.Ejb3Configuration.addClassesToSessionFactory(Ejb3Configuration.java:871) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:758) at org.hibernate.ejb.Ejb3Configuration.configure(Ejb3Configuration.java:425) at org.hibernate.ejb.HibernatePersistence.createContainerEntityManagerFactory(HibernatePersistence.java:131) at org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean.createNativeEntityManagerFactory(LocalContainerEntityManagerFactoryBean.java:225) at org.springframework.orm.jpa.AbstractEntityManagerFactoryBean.afterPropertiesSet(AbstractEntityManagerFactoryBean.java:308) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1460) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1400) ... 45 more Caused by: java.lang.ClassNotFoundException: WEB-INF.classes.org.gwtrpcspring.example.server.Person at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Unknown Source) at org.hibernate.util.ReflectHelper.classForName(ReflectHelper.java:135) at org.hibernate.ejb.Ejb3Configuration.classForName(Ejb3Configuration.java:1009) at org.hibernate.ejb.Ejb3Configuration.addNamedAnnotatedClasses(Ejb3Configuration.java:1081) ... 53 more INFO [main] org.eclipse.jetty.util.log - Started [email protected]:8080 And this is my applicationContext.xml file <?xml version="1.0" encoding="UTF-8"?> <beans> <context:annotation-config /> <context:component-scan base-package="org.gwtrpcspring.example.server" /> <bean id="taskExecutor" class="org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor"> <property name="corePoolSize" value="5" /> <property name="maxPoolSize" value="10" /> <property name="queueCapacity" value="25" /> </bean> <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"> <property name="driverClassName" value="com.mysql.jdbc.Driver" /> <property name="url" value="jdbc:mysql://localhost:3306/test" /> <property name="username" value="jewel" /> <property name="password" value="jewel" /> </bean> <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="dataSource" ref="dataSource" /> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter"> <property name="databasePlatform" value="org.hibernate.dialect.MySQLDialect" /> <!-- <property name="databasePlatform" value="org.hibernate.dialect.HSQLDialect" /> --> <property name="showSql" value="false" /> <property name="generateDdl" value="true" /> </bean> </property> </bean> <tx:annotation-driven /> <bean id="transactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory" /> </bean> <bean class="org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor" /> </beans>

  Read the article

• MPNowPlayingInfoCenter defaultCenter will not update or retrieve information

  - by Jayson Lane

  I'm working to update the MPNowPlayingInfoCenter and having a bit of trouble. I've tried quite a bit to the point where I'm at a loss. The following is my code: self.audioPlayer.allowsAirPlay = NO; Class playingInfoCenter = NSClassFromString(@"MPNowPlayingInfoCenter"); if (playingInfoCenter) { NSMutableDictionary *songInfo = [[NSMutableDictionary alloc] init]; MPMediaItemArtwork *albumArt = [[MPMediaItemArtwork alloc] initWithImage:[UIImage imageNamed:@"series_placeholder"]]; [songInfo setObject:thePodcast.title forKey:MPMediaItemPropertyTitle]; [songInfo setObject:thePodcast.author forKey:MPMediaItemPropertyArtist]; [songInfo setObject:@"NCC" forKey:MPMediaItemPropertyAlbumTitle]; [songInfo setObject:albumArt forKey:MPMediaItemPropertyArtwork]; [[MPNowPlayingInfoCenter defaultCenter] setNowPlayingInfo:songInfo]; } This isn't working, I've also tried: [[MPNowPlayingInfoCenter defaultCenter] setNowPlayingInfo:nil]; In an attempt to get it to remove the existing information from the iPod app (or whatever may have info there). In addition, just to see if I could find out the problem, I've tried retrieving the current information on app launch: NSDictionary *info = [[MPNowPlayingInfoCenter defaultCenter] nowPlayingInfo]; NSString *title = [info valueForKey:MPMediaItemPropertyTitle]; NSString *author = [info valueForKey:MPMediaItemPropertyArtist]; NSLog(@"Currently playing: %@ // %@", title, author); and I get Currently playing: (null) // (null) I've researched this quite a bit and the following articles explain it pretty thoroughly, however, I am still unable to get this working properly. Am I missing something? Would there be anything interfering with this? Is this a service something my app needs to register to access (didn't see this in any docs)? Apple's Docs Change lock screen background audio controls Now playing info ignored UPDATE: I've created a tutorial outlining how I was able to get this functioning properly: http://jaysonlane.net/tech-blog/2012/04/lock-screen-now-playing-with-mpnowplayinginfocenter/

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >