Search Results

Search found 7583 results on 304 pages for 'roger guess'.

Page 252/304 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• Android: SurfaceView and Z-Level Question

  - by JimBadger

  I have a FrameLayout containint first a SurfaceView, and second a RelativeLayout which in turn contians various Buttons and TextViews. Upon the canvas of the SurfaceView I am drawing numerous Bitmaps, and, via Touch and Motion Events am allowing the user to drag them around. These Bitmaps, when dragged around pass underneath the Buttons etc that are inside the RelativeLayout. Now, it's my (possibly mistaken) understanding that the "Z-level" of the SurfaceView, or whatever it has that passes for it, is entirely unrelated to the actual Z-level of the rest of the Layout. Is this the case? If so, how may I get around it, so that dragged Bitmaps are drawn ontop of other Views? Or what other way can I implement a full-screen canvas and yet not have my buttons etc act like the controls of an overlay. I guess what I actually need is an underlay, where touch events can still be picked up by the Buttons etc underneath. But I don't know how to achieve this, as, when redrawing my Canvas, I have to also redraw the background. Can I swap the order of the RelativeLayout and the SurfaceView inside the FrameLayout, and then make the background of the Canvas transparent? If so how? Will touch events still "fall through" to the buttons underneath? Thanks for bearing with me, I know I'm a bit of a waffler.

  Read the article

• algorithm - How to sort a 0/1 array with 2n/3 comparisons?

  - by Jackson Tale

  In Algorithm Design Manual, there is such an excise 4-26 Consider the problem of sorting a sequence of n 0’s and 1’s using comparisons. For each comparison of two values x and y, the algorithm learns which of x < y, x = y, or x y holds. (a) Give an algorithm to sort in n - 1 comparisons in the worst case. Show that your algorithm is optimal. (b) Give an algorithm to sort in 2n/3 comparisons in the average case (assuming each of the n inputs is 0 or 1 with equal probability). Show that your algorithm is optimal. For (a), I think it is fairly easy. I can choose a[n-1] as pivot, then do something like in quicksort partition, scan 0 to n - 2, find the middle point where left side is all 0 and right side is all 1, this take n - 1 comparisons. But for (b), I can't get a clue. It says "each of the n inputs is 0 or 1 with equal probability", so I guess I can assume the numbers of 0 and 1 equal? But how can I get a result which is related to 1/3? divide the whole array into 3 groups? Thanks

  Read the article

• Draw a comparison between an integer in a specific row and a count

  - by XCoderX

  This is a follow-up question to this one: Check for specific integer in a row WHERE user = $name I want a user to be able to comment on my site for exactly five times a day. After this five times, the user has to wait 24 hours. In order to accomplish that I raise a counter in my MYSQL database, right next to the user. So where the name of the user is, there is where the counter gets raised. When it reaches 5 it should stop counting and reset after 24 hours. In order to check the time I use a timestamp. I check if the timestamp is older than 24 hours. If that is the case, the counter gets reseted (-5) and the user can comment again. In order to do that, I use the following code, however it never stops at five, my guess is that my comparison is wrong somehow: $counter = "SELECT FROM table VALUES CommentCounterReset WHERE Name = '$name'"; if(!isset($_SESSION['ts'])); { $_SESSION['ts'] = time(); } if ($counter >= 5) { if (time() - $_SESSION['ts'] <= 60*60*24){ echo "You already wrote five comments."; } else { $sql = "UPDATE table SET CommentCounterReset = CommentCounterReset-5 WHERE Name = '$name'"; } } else { $sql = "UPDATE table SET CommentCounterReset = CommentCounterReset+1 WHERE Name = '$name'"; echo "Your comment has been added."; }

  Read the article

• Installing Mercurial on Windows Apache XAMPP Tutorial

  - by Tim Dellas

  After asking this question (http://stackoverflow.com/questions/2675764/xampp-mercurial-installation-on-windows-apache-hgwebdir-cgi-script-error) and reading though the whole internet including this question (http://stackoverflow.com/questions/644322/how-do-i-get-mercurials-hgwebdir-working-on-windows) and all its links for about 10 hours, I seem to not be able to find a solution. I begun with this tutorial http://mercurial.selenic.com/wiki/HgWebDirStepByStep ... and I really don't want to install ancient versions of Mercurial. I got my windows-apache to run Python scripts, CGI-Scripts, publish them in the wild, but hgwebdir just won't work. Question 1: Can someone please enrich his personal blog with a tutorial on how to install MERCURIAL on a WINDOWS XAMPP installation and make it visible to the world? I guarantee a lot of pageviews, as this is not a trivial problem. And this would sincerely help a lot of other people I guess. Question 2: For example, even after browsing half a day through everywhere, I just cannot find out, which version of python I need to pair with the freshest version of mercurial, and I get the "magic number is wrong"-error. This would be my question, if noone has time to make up a nice blogpost. Sorry for being a bit frustrated.

  Read the article

• How do you use stl's functions like for_each?

  - by thomas-gies

  I started using stl containers because they came in very handy when I needed functionality of a list, set and map and had nothing else available in my programming environment. I did not care much about the ideas behind it. STL documentations were only interesting up to the point where it came to functions, etc. Then I skipped reading and just used the containers. But yesterday, still being relaxed from my holidays, I just gave it a try and wanted to go a bit more the stl way. So I used the transform function (can I have a little bit of applause for me, thank you). From an academic point of view it really looked interesting and it worked. But the thing that boroughs me is that if you intensify the use of those functions, you need 10ks of helper classes for mostly everything you want to do in your code. The hole logic of the program is sliced in tiny pieces. This slicing is not the result of god coding habits. It's just a technical need. Something, that makes my life probably harder not easier. And I learned the hard way, that you should always choose the simplest approach that solves the problem at hand. And I can't see what, for example, the for_each function is doing for me that justifies the use of a helper class over several simple lines of code that sit inside a normal loop so that everybody can see what is going on. I would like to know, what you are thinking about my concerns? Did you see it like I do when you started working this way and have changed your mind when you got used to it? Are there benefits that I overlooked? Or do you just ignore this stuff as I did (and will go an doing it, probably). Thanks. PS: I know that there is a real for_each loop in boost. But I ignore it here since it is just a convenient way for my usual loops with iterators I guess.

  Read the article

• Incremental deploy from a shell script

  - by WishCow

  I have a project, where I'm forced to use ftp as a means of deploying the files to the live server. I'm developing on linux, so I hacked together a bash script that makes a backup of the ftp server's contents, deletes all the files on the ftp, and uploads all the fresh files from the mercurial repository. (and taking care of user uploaded files and folders, and making post-deploy changes, etc) It's working well, but the project is starting to get big enough to make the deployment process too long. I'd like to modify the script to look up which files have changed, and only deploy the modified files. (the backup is fine atm as it is) I'm using mercurial as a VCS, so my idea is to somehow request the changed files between two revisions from it, iterate over the changed files, and upload each modified file, and delete each removed file. I can use hg log -vr rev1:rev2, and from the output, I can carve out the changed files with grep/sed/etc. Two problems: I have heard the horror stories that parsing the output of ls leads to insanity, so my guess is that the same applies to here, if I try to parse the output of hg log, the variables will undergo word-splitting, and all kinds of transformations. hg log doesn't tell me a file is modified/added/deleted. Differentiating between modified and deleted files would be the least. So, what would be the correct way to do this? I'm using yafc as an ftp client, in case it's needed, but willing to switch.

  Read the article

• Clear tableView cell cache (or remove an entry)

  - by ManniAT

  Hi, I have the same question problem as described here http://stackoverflow.com/questions/2286669/iphone-how-to-purge-a-cached-uitableviewcell But my problem can't be solved with "resetting content". To be precise - I use a custom cell (own class). While running the application it is possible that I have to use a different "cell type". It's the same class - but it has (a lot of) differnt attributes. Of course I could always reset all the things at "PrepareForReuse" but that's not a good idea I guess (there are a lot things to reset). My idea - I do all these things in the constructor of the cell. And all the rows will use this "type of cell" later. When the (seldom) situation comes that I have to change the look of all rows I create a new instance of this kind of cell with different settings. And now I want to replace the queued cell with this new one. I tried it with simply calling the constructor with the same cellidentifier (in the hope it will replace the existing one) but that doesn't work. I also didn't find a "ClearReusableCells" or something like this. Is there a way to clear the cache - or to remove / replace a specific item? Manfred

  Read the article

• java: retrieving the "canonical value" from a Set<T> where T has a custom equals()

  - by Jason S

  I have a class Foo which overrides equals() and hashCode() properly. I would like to also would like to use a HashSet<Foo> to keep track of "canonical values" e.g. I have a class that I would like to write like this, so that if I have two separate objects that are equivalent I can coalesce them into references to the same object: class Canonicalizer<T> { final private Set<T> values = new HashSet<T>(); public T findCanonicalValue(T value) { T canonical = this.values.get(value); if (canonical == null) { // not in the set, so put it there for the future this.values.add(value); return value; } else { return canonical; } } } except that Set doesn't have a "get" method that would return the actual value stored in the set, just the "contains" method that returns true or false. (I guess that it assumes that if you have an object that is equal to a separate object in the set, you don't need to retrieve the one in the set) Is there a convenient way to do this? The only other thing I can think of is to use a map and a list: class Canonicalizer<T> { // warning: neglects concurrency issues final private Map<T, Integer> valueIndex = new HashMap<T, Integer>(); final private List<T> values = new ArrayList<T>(); public T findCanonicalValue(T value) { Integer i = this.valueIndex.get(value); if (i == null) { // not in the set, so put it there for the future i = this.values.size(); this.values.add(value); this.valueIndex.put(value, i); return value; } else { // in the set return this.values.get(i); } } }

  Read the article

• Decompiling an old Program

  - by Pedro Laranjeiro

  Hi. I have been asked to update a program written in 1987 in Delphi (I guess). I have no documentation about this program only a few side notes the programmer took that don't make too much sense to make. The cd show this files: Size | Filename - 19956 VP.DTA - 142300 VP.LEX - 404 VP.NDX - 126502 VP.RCS - 131016 VP.SCR - 150067 VP.XEL - 101791 vp.exe Is anyone of this files a database? If so can I access it's data? I tried several code decompilers but they show a message saying it was not a Win32 compatible application. The program run in MS-DOS. Is it possible to obtain the source code? Can I use this code in any way to build a new application? Thanks Update01: I can run the program in MSDOS. The program conjugate verbs and shows an example sentence where the verb can be used. The GUI is a little bit confusing and there is no help menu so I can't see all the capabilities of the program.

  Read the article

• Is it poor design to create objects that only execute code during the constructor?

  - by Curtix

  In my design I am using objects that evaluate a data record. The constructor is called with the data record and type of evaluation as parameters and then the constructor calls all of the object's code necessary to evaluate the record. This includes using the type of evaluation to find additional parameter-like data in a text file. There are in the neighborhood of 250 unique evaluation types that use the same or similar code and unique parameters coming from the text file. Some of these evaluations use different code so I benefit a lot from this model because I can use inheritance and polymorphism. Once the object is created there isn't any need to execute additional code on the object (at least for now) and it is used more like a struct; its kept on a list and 3 properties are used later. I think this design is the easiest to understand, code, and read. A logical alternative I guess would be using functions that return score structs, but you can't inherit from methods so it would make it kind of sloppy imo. I am using vb.net and these classes will be used in an asp.net web app as well as in a distributed app. thanks for your input

  Read the article

• how does MySQL implement the "group by"?

  - by user188916

  I read from the MySQL Reference Manual and find that when it can take use of index,it just do index scan,other it will create tmp tables and do things like filesort. And I also read from other article that the "Group By" result will sort by group by columns by default,if "order by null" clause added,it won't don filesort. The difference can be found from the "explain ..." clause. so my problem is:what is the difference between "group by" clause that with "order by null" and which doesn't have? I try to use profiling to see what mysql do on the background,and only see result like: result for group clause without order by null: |preparing | 0.000016 | | Creating tmp table | 0.000048 | | executing | 0.000009 | | Copying to tmp table | 0.000109 | **| Sorting result | 0.000023 |** | Sending data | 0.000027 | result for clause with "order by null": preparing | 0.000016 | | Creating tmp table | 0.000052 | | executing | 0.000009 | | Copying to tmp table | 0.000114 | | Sending data | 0.000028 | So I guess what MySQL do when the "order by null" added,it does not use filesort algorithm,maybe when it creates the tmp table,it uses index as well,and then use the index to do group by operation,when completed,it just read result from the table rows and does not sort the result. But my original opinion is that MySQL can use quicksort to sort the items and then do group by,so the result will be sorted as well. Any opinion appreciated,thanks.

  Read the article

• VC++ 6 and MS Speech SDK 5.1 fatal error C1083: Cannot open source file: 'files\microsoft': No such

  - by eg123

  Trying to compile an application (flite synthesis sapi) on vc++6. This requires Microsoft Speech SDK 5.1 Have included C:\Program Files\Microsoft Speech SDK 5.1\IDL C:\Program Files\Microsoft Speech SDK 5.1\include using Toolsoptionsdirectories and also on another attempt via ProjectSettings Repeatedly get this error microsoft fatal error C1083: Cannot open source file: 'files\microsoft': No such file or directory speech fatal error C1083: Cannot open source file: 'speech': No such file or directory sdk fatal error C1083: Cannot open source file: 'sdk': No such file or directory idl fatal error C1083: Cannot open source file: '5.1\idl': No such file or directory FliteCMUKalDiphone.idl Thought it may be spaces related so included full path in quotes in relevant .h files. No joy Installed Microsoft Speech SDK 5.1 on another machine in same folder as flite and renamed to mssdk51 (so no spaces in pathname) but same error came up. Tried pasting in contents of each .idl called in file where glitch seems to generate Still same message. I am new to C++ and programming in general. My only guess is that something in the speech sdk is calling the .idl file and I can't find where from. Of course this is probably way wrong!

  Read the article

• Re-add missing project without having to re-add it to all projects referencing it

  - by coffeeaddict

  Lets say you open a .NET solution (mine being VS 2010) after you just moved your entire folder to some new location locally. Now one of the projects that was being referenced in that solution is not there and so when you launch VS, it naturally tells you that the project is missing and therefore as always you see the project greyed out in Solution Explorer. Ok, well I can't go re-add that project (specify a different path for where that project lives) unless I remove the missing project reference and then try to re-add it back to the solution. But how can I reassociate a project without losing all references in other projects that were referencing that missing project? Is this possible? Otherwise every time I re-add that missing project, I end up having to go through about 8 projects of mine that are referencing it and re-reference it for each one of those projects which is tedious. I guess it makes sense since each project was referencing that missing project at that old path so it would break it there as well but is there an easier way to re-associate a project and references to that missing project without having to take 10 minutes every time to re-associate it all over the place if simply the path has changed?

  Read the article

• Visual Studio 2008 closes unexpectedly

  - by Jose

  I don't know if I can really get an answer to this question, but it really irks me and I would like to know if someone has an idea how to arrive to an answer. I have a pretty large solution in VS 2008 that maybe every week/every other week whenever I click properties to get to the project properties the IDE closes without warning. After that happens it will close EVERY time I try and view the properties. At that point I try and delete the .suo file, I resize the IDE, I close the tabs within the project, I restore default VS Settings(when I'm desperate). Eventually 20-30 minutes later I can actually view the properties. I haven't figured out exactly what fixes it, seems to be different every time. Once it's "fixed" I can't break it again so I can figure out what "fixed" it. This seems to be project specific, because I can view properties of other projects while this project is misbehaving. I guess my first question is, does VS log reasons for closing unexpectedly? Can I find out what the offending reason behind this is? The main frustration is I don't know that cause, nor the cure. Any ideas?

  Read the article

• Supersede users need to press enter after inputting a string in python 3.0

  - by Cimex

  I've been attempting to create a simple Rock, Paper, Scissors game in python 3.0 -- very standard task for anybody learning programming. But, as I finish up to a point, I think,"wow, that'd be awesome", or,"it'd be cool to do this!" So anyways, I keep building upon the project... I've developed a menu, a single player game vs the computer, and just finished the multiplayer game. But, I've realized, that the multiplayer game isn't very effective. It just dosen't work like the analog version of the game. Currently, it'll ask for player1's input, then player2's input, compare them, and spit out the result and the current score. What I'd rather have happen is that the program asks for both players input at the same time and both players input their choice at the same time. I understand that I can easily do that by just grabbing the index of the first and second answer and compare the 2 inputs -- easy. But what I'd rather have happen is that after both players enter their one character answers at the same time (r for rock, p for paper, or s for scissors), then the program will auto enter the input. Not needing someone to press enter. The input would be dictated by the fact that 2 characters have been entered. I guess my question is: Is there any way to dictate what can be used as an input for 'enter'?

  Read the article

• How to extend a jquery ui widget ? (1.7)

  - by Jide

  I would like to create a custom version of the sortable widget. I have been searching for documentation, but could not find something really accurate. The best information I found was : http://jqueryui.pbworks.com/Widget-factory. I tried : $.widget("ui.customsortable", $.extend($.ui.sortable, { _init: function() { $.widget.prototype._init.apply(this, arguments); } })); But $.widget.prototype._init is not the function I want to call I guess since it is the $.widget prototype. Then, I tried something I read here and there : var _init = $.ui.sortable.prototype._init; $.widget("ui.customsortable", $.extend($.ui.sortable, { _init: function() { _init.apply(this, arguments); }, })); But : I can't believe I have to store all methods I want to override like this, it is so ugly. It throws an error ("this.refresh is not a function"), which means the refresh method does not exist. Does that mean I would have to recreate all methods I want to override ? What's the point of extending in that case ? Am I missing something here ? Thanks for your help !

  Read the article

• convert old repository to mercurial

  - by nedlud

  I've been playing around with different versioning systems to find one I'm comfortable with. I started with SVN (lets call this version of the project "f1"), then changed over to GIT. But I didn't know how to convert the old SVN repo to GIT, so I just copied the folder, deleted the .svn stuff, and turned it into a GIT repo (lets call this copied version "f2"). Now I'm playing around with Mercurial and was very pleased to find that it has a Tortoise client for Windows. I was also please to find how easy it was to convert the GIT repo into Mercurial, so I preserved the history (I still cloned it first, just in case. So I'm calling this hg version "f3"). But now what I'm wondering is: what do I do with the old SVN repo that still holds my history from before I played with GIT? I guess I can convert the old SVN repo to Mercurial, but can I then merge those two histories into the one repository so I have a complete set of histories in one place? In other words, can I prepend f1 to f3?

  Read the article

• Plotting a graph with GD

  - by Nayena

  Here it goes. I have been thinking about this for a long time, and havent really been able to put up a proper way to do it yet. I havent implemented anything yet, as im still designing the thing. The idea is that i crawl a website for internal links, i got this settled, its easy, but after the crawling, i end up with an array with lots of links, and how many times those particular link appears on the site that i crawled (and how they're connected). With this huge array, i want to draw a graph somehow. Assuming i can handle the data correctly, the real question here is how i can draw this in a image by the use of the GD library. I figured if theres less than 12 elements, i can align them up on a unit circle spacing them up as a circle and then connecting them accordingly, so anything up to 12 elements shouldn't be a problem, but if theres more than 12, it could be awesome getting them lined up like this Or well, thats just a rough drawing, but i guess its just to prove a point. So i'm here looking for guidance or tips towards getting the math down to getting the stuff lined up in a good way. I have previously made bar-graphs, so i have little experience doing math with GD. If possible, id prefer not using some plotter-library - in the end, it gives me a better understanding on how things are supposed to be.

  Read the article

• How to parse time stamps with Unicode characters in Java or Perl?

  - by ram

  I'm trying to make my code as generic as possible. I'm trying to parse install time of a product installation. I will have two files in the product, one that has time stamp I need to parse and other file tells the language of the installation. This is how I'm parsing the timestamp public class ts { public static void main (String[] args){ String installTime = "2009/11/26 \u4e0b\u5348 04:40:54"; //This timestamp I got from the first file. Those unicode charecters are some Chinese charecters...AM/PM I guess //Locale = new Locale();//don't set the language yet SimpleDateFormat df = (SimpleDateFormat)DateFormat.getDateTimeInstance(DateFormat.DEFAULT,DateFormat.DEFAULT); Date instTime = null; try { instTime = df.parse(installTime); } catch (ParseException e) { // TODO Auto-generated catch block e.printStackTrace(); } System.out.println(instTime.toString()); } } The output I get is Parsing Failed java.text.ParseException: Unparseable date: "2009/11/26 \u4e0b\u5348 04:40:54" at java.text.DateFormat.parse(Unknown Source) at ts.main(ts.java:39) Exception in thread "main" java.lang.NullPointerException at ts.main(ts.java:45) It throws exception and at the end when I print it, it shows some proper date... wrong though. I would really appreciate if you could clarify me on these doubts How to parse timestamps that have unicode characters if this is not the proper way? If parsing is failed, how could instTime able to hold some date, wrong though? I know its some chinese,Korean time stamps so I set the locale to zh and ko as follows.. even then same error comes again Locale = new Locale("ko"); Locale = new Locale("ja"); Locale = new Locale("zh"); How can I do the same thing in Perl? I can't use Date::Manip package; Is there any other way?

  Read the article

• DNS protocol message example

  - by virtual-lab

  hello there, I am trying to figure out how to send out DNS messages from an application socket adapter to a DNSBL. I spent the last two days understanding the basics, including experimenting with WireShark to catch an example of message exchanged. Now I would like to query the DNS without using dig or host command (I'm using Ubuntu); how can I perform this action at low level, without the help of these tools in wrapping the request in a proper DNS message format? How the message should be post it? Hex or String? Thanks in advance for any help. Regards Alessandro Ilardo Comment added I am investigating on JDev and Oracle SOA. The platform provides a Socket Adapter which simply apply a transformation (XSLT) and send the message straight to the socket. How the payload parameters (ex. the host I'm looking up) are wrapped within the message is left to the developer. So basically I have an idea on how the all DNS message is structured, but rather than put everything on JDev stright away I'd like to make some tests on my own just to make sure I got a valid message format. So, I am not using any specific language (I don't even understand why they moved my question from serverfault) and I don't want to use any tools which would hide part of the message, such as the header. I know they work well btw. I guess this stuff has something to do with packet injection. Someone suggested me to use telnet, but I've only used for SMTP or HTTP, I haven't got a clue on how it works for DNS request. Does it make more sense now?

  Read the article

• How to set a EditText in a certain column of a TableLayout?

  - by Nick

  I have a TableLayout on one Android Activity UI. It has two columns. Now I need to add a new row, and put an EditText box in second column of that new row. And also, I want that EditText full fill the whole cell. I have some code like this: TableRow tr = new TableRow(context); EditText et = new EditText(context); et.SetMaxLines(4); etText.setLayoutParams(new TableRow.LayoutParams(1)); //set it to the second coloumn tr.addView(et); tl.addView(tr); //tl is the tableLayout It puts the EditText in the second column fine, but the EditText is too small. I tried to use etText.setLayoutParams(new LayoutParams(LayoutParams.FILL_PARENT, LayoutParams.FILL_PARENT)); but that seems to disabled the TableRow.LayoutParams setting. I guess each control can only have one LayoutParamas setting. So, how to make the EditText as a 4 lines text editor and also make sure it is in the second column of that row? Thanks.

  Read the article

• Listening socket

  - by hoodoos

  I got a strange problem, I never actually expirienced this before, here is the code of the server (client is firefox in this case), the way I create it: _Socket = new Socket( AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp ); _Socket.Bind( new IPEndPoint( Settings.IP, Settings.Port ) ); _Socket.Listen( 1000 ); _Socket.Blocking = false; the way i accept connection: while( _IsWorking ) { if( listener.Socket.Poll( -1, SelectMode.SelectRead ) ) { Socket clientSocket = listener.Socket.Accept(); clientSocket.Blocking = false; clientSocket.SetSocketOption( SocketOptionLevel.Tcp, SocketOptionName.NoDelay, true ); } } So I'm expecting it hang on listener.Socket.Poll till new connection comes, but after first one comes it hangs on poll forever. I tried to poll it constantly with smaller delay, let's say 10 microseconds, then it never goes in SelectMode.SelectRead. I guess it maybe somehow related on client's socket reuse? Maybe I don't shutdown client socket propertly and client(firefox) decides to use an old socket? I disconnect client socket this way: Context.Socket.Shutdown( SocketShutdown.Both ); // context is just a wrapper around socket Context.Socket.Close(); What may cause that problem?

  Read the article

• Google App Engine datastore encoding?

  - by sernaferna

  I'm using the GAE datastore for a Java application, and storing some text that will be in numerous languages. In my servlet, I'm first checking to see if there's any data in the data store, and, if not, I'm creating some, similar to the following: ArrayList<Lang> list = new ArrayList<Lang>(); list.add(new Lang("EN", "English", 1)); list.add(new Lang("ES", "Español", 0)); //more languages here... PersistenceManager pm = PMF.get().getPersistenceManager(); for(Lang l : list) { pm.makePersistent(l); } Since this is using JDO, I guess I should include the relevent parts of the Lang class too: @PersistenceCapable public class Lang { @PrimaryKey private String code; @Persistent private String name; @Persistent private int popularity; // getters & setters & constructors... } However, the non-ASCII characters are giving me grief. I've set my Eclipse project to use the UTF-8 encoding instead of the default Cp1252, so I think I'm okay from that perspective, but when I use the App Engine Data Viewer to look at my data, that Español entry becomes Español, and when I click on it to view it, I get a 500 Server Error. (There are some other entries with right-to-left text that don't even show up in the Data Viewer at all, but one problem at a time...) Is there anything special I can do in my code to set the character encoding, or specify to GAE that the data I'm storing is UTF-8? Or is the problem on the Eclipse side, and is there something I should be doing with my Java code?

  Read the article

• What's the correct place to share application logic in CakePHP?

  - by Pichan

  I guess simple answer to the question would be a component. Although I agree, I feel weird having to write a component for something so specific. For example, let's say I have a table of users. When a user is created, it should form a chain reaction of events, initiating different kinds of data related to the user all around the database. I figured it would be best to avoid directly manipulating the database from different controllers and instead pack all that neatly in a method. However since some logic needs to be accesed separately, I really can't have the whole package in a single method. Instead I thought it would be logical to break it up to smaller pieces(like $userModelOrController->createNew() and $candyStorageModelOrController->createNew()) that only interact with their respective database table. Now, if the logic is put to the model, it works great until I need to use other models. Of course it's possible, but when compared to loading models in a controller, it's not that simple. It's like a Cake developer telling me "Sure, it's possible if you want to do it that way but that's not how I would do it". Then, if the logic is put to the controller, I can access other models really easy through $this->loadModel(), but that brings me back to the previously explained situation since I need to be able to continue the chain reaction indefinitely. Accessing other controllers from a controller is possible, but again there doesn't seem to be any direct way of doing so, so I'm guessing I'm still not doing it right. By using a component this problem could be solved easily, since components are available to every controller I want. But like I wrote at the beginning, it feels awkward to create a component specifically for this one task. To me, components seem more like packages of extra functionality(like the core components) and not something to share controller-specific logic. Since I'm new to this whole MVC thing, I could've completely misunderstood the concept. Once again, I would be thankful if someone pointed me to the right direction :)

  Read the article

• YouTube API, jQuery attr won't swap element attributes (I think) in IE, but works in FF

  - by Anthony

  JavaScript (jQuery) function display_youtube(new_url) { $('#movie_url').removeAttr('value'); $('#embed_url').removeAttr('src'); $(document).ready(function() { $('#movie_url').attr('value', new_url); $('#embed_url').attr('src', new_url); $('#shade').css('display', 'block'); $('#youtube_player').css('display', 'block'); $('#exit_youtube').css('display', 'block'); }); } HTML <object width="720" height="480"> <param id="movie_url" name="movie" value="http://www.youtube.com/v/_eaToCSn7yU?f=user_uploads&app=youtube_gdata&autoplay=0" /> <param name="allowFullScreen" value="true" /> <param name="allowscriptaccess" value="always" /> <embed id="embed_url" src="http://www.youtube.com/v/_eaToCSn7yU?f=user_uploads&app=youtube_gdata&autoplay=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="720" height="480" /> </object> Hyperlink <a href="javascript:display_youtube('http://www.youtube.com/v/_eaToCSn7yU?f=user_uploads&app=youtube_gdata&autoplay=1');">Click Here for Fun!</a> What I've done is parsed YouTube's API for the videos on my user channel. The hyperlink above is php generated, meant to trigger the above JavaScript function, and swap the url from attributes contained in ids "movie_url" and "embed_url". Works just like it should in FF, but IE will only perform the .css commands. My guess? IE doesn't like me assigning IDs to PARAM and EMBED, perhaps? What do you think?

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >