Search Results

Search found 8367 results on 335 pages for 'temporal difference'.

Page 252/335 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• Body of email breaks distribution list in exchange?

  - by widgisoft

  Hi, I have a very odd problem that I'm not sure is a programming issue or a server issue :-p. Basically I'm sending an email to an exchange distribution list that includes a PHP stack trace; during certain faults the trace includes really high level information such as the machine's environment variables (during file reads, etc.). I went through a copy of the email line by line until the email sent and it appears the line: [SUDO_COMMAND] => /etc/init.d/httpd restart is the culprit. Adding a string replacement in before the email is sent allows a successful send. What I don't understand is WHY these stream of characters are causing the issue ONLY on the distribution email. If I send the email to myself as well, i.e. "[email protected]; [email protected]", then I get the email fine. Re-ordering the list doesn't make a difference the group never gets the email. Because the individual gets the email and not the group I'm assuming the fault is with exchange and some rogue filtering - I've gone through it with the sysadmins and there's no filtering of any sort on that group... so maybe it's a bug? I can't find anyone else having recorded this specific fault so I figured I'd open it here. For now I'm just not using the distribution list but it'd be nice to eventually find the solution. Many thanks, Chris

  Read the article

• Why my hard disk can't boot from the BIOS?

  - by Mario

  I installed a new sata DVD burner. When I turned on the machine (windows 7) it didn't boot. It can boot from a lubuntu CD. There is an option on lubuntu to boot form the first hard disk. If I select it, the machine boots normally to windows 7. So from the CD I can boot but not from the BIOS. I checked all the options more than once: boot from HD, not boot from removable, boot from USB, boot from optical. The order of the boot sequence is HD then DVD. I tried booting only with the HD; I disconnected both DVDs. I even tried recovery of the MBR: bootsect, bootrec, fixmbr, buildbcd, nt60, etc. So, the question is, does this have a reason, what's the difference between booting from the BIOS (as I think) to from the DVD?. The BIOS is intel, it has BIOS codes on the right bottom corner, it stays at 5A for a while. 5A is "Resetting PATA/SATA bus and all devices".

  Read the article

• Mysql can not resolve hostnames when checking privileges

  - by Fabio

  I'm going crazy to solve this. I have a mysql installation (on machine db.example.org) which doesn't resolve a given hostname. I gave privileges using hostnames i.e. GRANT USAGE ON *.* TO 'user'@'host1.example.org' IDENTIFIED BY PASSWORD 'secret' GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, INDEX ON `my_database`.* TO 'user'@'host1.example.org' However when I try to connect using mysql -u user -p -h db.example.org I obtain ERROR 1045 (28000): Access denied for user 'user'@'192.168.11.244' (using password: YES) I already checked for correct name resolution in the dns system: $ dig -x 192.168.11.244 ;; ANSWER SECTION: 244.11.168.192.in-addr.arpa. 68900 IN PTR host1.example.org. I've also checked for skip-name-resolve option in mysql variables in fact if I can access from another machine on the same subnet using hostname privileges. The only difference is that host1.example.org and db.example.org point the same ip on the same machine i.e. both db.example.org and host1.example.org have ip 192.168.11.244. In this way all the applications using that database can use the name db.example.org and we can move the data on other hosts (if needed) just by changing the dns record, leaving the application code unchanged. What should I do to solve this or at least to understand what's happening?

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• Ubuntu 12.04 froze during update, won't boot

  - by Cichol

  I've recently installed Ubuntu 12.04 on my laptop, and every time i tried to update it, it would freeze for a few seconds, and tell me that the updates could not be downloaded. After many, many tries I managed to get them downloaded, but then in the middle of installing them, it froze. Completely. No mouse movement, no blinking lights, no nothing. After a few hours of letting it sit there, I finally hit the power button to do a hard reset, and now when I select Ubuntu on the boot screen (Dual-boot with Windows 7), I get a blank purple screen, and then nothing. Another freeze. I've tried getting into the console, but no command I input has any visible effect. I have a ton of music stored on the partition it's in, so I'd really rather not have to reinstall. My specs, to the best of my knowledge: Clevo Corp model B7130 (Sager custom) CPU: Intel Core i5 @ 2.53gHz (4 CPUs) Graphics Card: Nvidia GeForce 425m 4096 MB RAM Drivers: Whatever comes with the download of 12.04. As a side-note, I installed Ubuntu via the Windows Installer program (wubi). Does that make a difference?

  Read the article

• Why is Mac supposedly better than Windows for graphics?

  - by Svish

  Ok, people just keep telling me that if you're going to be working with graphics and design and stuff, you should get a Mac. And I just don't get the logic. Because most of these people would be working with Adobe software, which are for both Windows and Mac. To me it seems like their whole argument is based on that "everyone else does". Like, Mac had some graphics software that Windows didn't earlier in history, so most people were using Mac. And since most people were using Mac, new people also started using Mac. And since most people were using Mac, schools and universities used Mac. Which taught new people to use Mac. So they were using Mac. And told everyone they met that everyone they knew were using Mac. And so on. Anyways... What is the deal really? Is there actually any advantage in using Mac for graphics and design and such things? My take is that you pretty much have the same software and both Mac and Windows are powerful enough, support enough RAM, are stable (as long as you don't install lot's of junk or faulty drivers), et cetera. So, can anyone give me a good explanation on this? Is there a real difference or are people just brainwashed?

  Read the article

• I need help choosing between two configurations of the Dell Studio 14

  - by Adnan

  There are two configurations of the Dell Studio 14 (1458) which I'm looking at: Config 1: Core i7-720QM @ 1.6 GHz; ATI Mobility Radeon HD 5450 1GB; 4gb DDR3 RAM @ 1066 MHz; 500 GB SATA HDD @ 7200 RPM; Price: $999 Config 2: Core i5-430M; ATI Mobility Radeon HD 4530 512MB; 4GB DDR3 RAM @ 1066 MHz; 500 GV SATA HDD @ 7200 RPM; Price: $874 What I want to know is, would config 1 still be able to do decent gaming (maybe some Starcraft II), and is there a great performance difference between the i5 and i7 processors? Is the $130 extra worth it for the i7 and better graphics card? I do more than just basic computing. I plan on getting into web design (specifically using Photoshop and Dreamweaver), and I wish to do gaming. I know Conifg 1 is the better value, but I want to be sure that the $130 more is truly worth it. I dont have too much money and want to spend wisely as possible, yet I am a computer geek and plan on doing a lot more than the average user.

  Read the article

• Windows XP mounting USB drive to same letter as previously mapped network drive

  - by GAThrawn

  Why does Windows always mount a USB drive as the next drive letter after the last physical drive, even when that letter is already taken by a mapped drive, and is there any way to improve this behaviour? What happens is I tend to use a few different flash drives on my PC, as well as having both a Blackberry and a personal phone that mount as USB drives when I plug them in to charge. Being on a corporate PC I also have a number of mapped network drives (some set by login script, some set as persistent mappings in my profile). When I first login I'll have drive letters like this: C: - Local Drive D: - DVD Drive G: - Login script mapped drive J: - Login script mapped drive When I plug the Blackberry in it'll mount two drives (one for onboard storage, one for the SD card) as E: and F:. If I then plug in another USB drive it will mount as G:, even though that's already taken by a network mapped drive. This leaves me with the following drives: C: - Local Drive D: - DVD Drive E: - USB drive (Blackberry) F: - USB drive (Blackberry) G: - Login script mapped drive [G: - USB drive - mounted but not visible in Explorer or command prompt] J: - Login script mapped drive I then have to go into Disk Management, find the new USB drive that's mounted to G: and re-assign it to another letter eg Z:, once this is done Auto-Play detects it and throws up its normal dialog, and its browseable in Explorer. While this is OK to do if you only use one or two USB drives and have admin access to your PC with your login account, its a total pain in the proverbial if you regularly use a whole load of different USB devices, and corporate policy means you have one account for your normal login (that only has User access to workstations), but have to use a different account for any privileged action. I realize that one possible reason for this is the difference between hardware which is mounted and assigned drive letters at the systen level, and mapped drives which are done at the user level. For USB devices that are already plugged in before login, then obviously they're mounted before Windows knows what network drives may be mapped. However if you plug the USB devices in after you're fully logged in and have drives mapped then Windows must know which letters are available?

  Read the article

• Unzipping archives, preserving folder hierarchy

  - by Hydrangea

  I've got a problem and am not sure what it is, but hope someone can help me think this through because this has me stumped. Backstory: I wrote a Java app (Android) that unzips some zip files downloaded from the network. Until now, this was working great. Then, this week, the archives that I'm creating on my pc (in Ubuntu 12.04) unzip on the Android phone into a flat hierarchy instead of preserving the folders. I'm creating the archives the same way (right-click on folder compress) but even though my old archives (created in 10.04) still unzip as expected, the new ones don't. On Ubuntu, the new zip files look the same to me as the old ones. When unzipped on my pc the folders in these new archives are restored the same as the old ones... it's the Android app that extracts the old ones fine and the new ones flat. What I really want to know, though, is what the difference between the archives is. Question: How could one determine why one zip archive would be extracted with folder hierarchy preserved, when an identical one (to all appearances on Ubuntu 12.04) is extracted with no hierarchy? Are there different ways in which a .zip file can "have" folders, but Ubuntu doesn't distinguish between them?

  Read the article

• lxc bandwidth control using tc

  - by kumar

  I am trying to restrict bandwidth inside my containers. I have tried using the following commands , But I think it is not getting effective. cd /sys/fs/cgroup/net_cls/ echo 0x1001 > A/net_cls.classid # 10:1 echo 0x1002 > B/net_cls.classid # 10:2 tc qdisc add dev eth0 root \ handle 10: htb tc class add dev eth0 parent 10: \ classid 10:1 htb rate 40mbit tc class add dev eth0 parent 10: \ classid 10:2 htb rate 30mbit tc filter add dev eth0 parent 10: \ protocol ip prio 10 \ handle 1: cgroup Here A and B are containers created with this command. lxc-execute -n A -f configfile /bin/bash lxc-execute -n B -f configfile /bin/bash Whereas configfile contains only this entry: lxc.utsname = test_lxc AFter starting the container , I have started vsftpd inside container A and try to access the files using the ftp client from another machine. Then I killed vsftpd in container A and started vsftpd in container B and try to access the files using ftp client from another machine. I cannot observe any difference in performance, for that matter it is nowhere nearer to 40mbit/30mbit. Please correct me whether anything wrong here.

  Read the article

• Need help setting up OpenLDAP on OSX Mountain Lion

  - by rjcarr

  I'm trying to get OpenLDAP manually configured on OSX Mountain Lion. I'd prefer to do it manually instead of installing OSX server, but if that's the only option (i.e., OpenLDAP on OSX isn't meant to be used without server) then I'll just install it. I've seen guides that mostly just say to change the password in slapd.conf and then start the server and it should work. However, whenever I try to do anything with the client it tells me this: ldap_bind: Invalid credentials (49) I've tried encrypting the password as well as leaving it plain it doesn't seem to matter. The version is 2.4.28 and I've read as of 2.4 OpenLDAP uses slapd.d directories, but that doesn't seem to be the case in OSX. There was mention of an 'olcRootPW' I should use (instead of 'rootpw' in slapd.conf), but I only found that in a file named slapd.ldif. Anyway, I tried setting a password in there but it didn't make a difference). So ... I'm really confused. Has anyone got OpenLDAP working on OSX Moutain Lion without the server tools?

  Read the article

• Why is wget so much faster than Firefox at some downloads?

  - by Earlz

  Recently, I needed to do an update of Xilinx WebPack, mind you, this is one hefty piece of software. It weighs in at 6gigs, which definitely isn't "quick" on any internet I've ever had available to me. So, when I went to download it(using Firefox of course), I was very... unsettled by the fact that the download was only going at 110kByte/s. My internet connection is capable of about 2200kByte/s download, so what gives!? My workaround in the past for this issue has been to take the link to my Linode linux server and download it there with wget, where the download will zip along at 14MByte/s, and then either copying it to my website directory and downloading it that way through HTTP, or using sftp. Both ways work about as well and will sufficiently max out my connection. However, I recently figured out the missing variable. I tried doing the download locally with wget and was able to max out my connection! TL;DR; Now, my question. Why is wget so much faster than firefox at downloading this file? I hardly ever have such a difference in download speeds except for with this one file.

  Read the article

• Upgrade Nokia Maps from v2 to v3 fails

  - by ssollinger

  I'm trying to install Nokia Maps 3.0 on my Nokia N82, without much success. I believe other similar Nokia phones have the same problem. My phone is connected through USB in "PC Suite" mode, and the latest firmware available for N82 is installed. I currently have Maps 2.0 installed. I'm installing from a Windows XP PC, and tried the update first from within Ovi Suite (latest version) and from Nokia Maps Updater (latest version). In both cases it detects that there is an update available (Maps 3.0), downlowds it and starts the install. On my phone, I then get the following error message: Unable to install. Component is built in. And on the PC I get the error Error Cannot update maps application. The installation failed or was cancelled on the phone (18). I found an entry for Maps in the App. manager and deleted it (and turned phone off and on again afterwards), but this didn't make any difference (and I don't think it changed the version of Maps installed either). This is the release version of Maps 3.0, not the beta. I found the problem mentioned many times on various web sites, but couldn't find a solution anywhere. Has anybody any ideas how to get the upgrade from Maps 2.0 to Maps 3.0 to work?

  Read the article

• Server 2008 NAT Internet Not Working

  - by Jack

  I'm trying to set up Routing and Remote Access on Windows Server 2008 R2, I have a network connection that I want to share the internet from to another private network. The server has two NICs which are configured as follows: External NIC (Dynamically assigned by ISP) IP:10.175.4.150 Subnet:255.255.192.0 Gateway:10.175.0.1 DNS:10.175.0.1 Internal NIC IP:172.16.254.1 Subnet:255.255.255.0 Gateway:None DNS:None I have set the external NIC to be the public interface and enabled NAT on it in the RRAS MMC and set the internal NIC to be a private interface. I have also set up the DNS forwarding or whatever it is in the NAT section. From a client (IP:172.16.254.2) I can ping the server and access files on it, when I try to browse the web with the default gateway set to the internal NIC ip I end up getting a 404 page which is returned from the ISPs default gateway. I'm guessing it's something to do with the double NAT possibly. Trying to ping the ISPs default gateway from a private network client just times out as does accessing it directly. I've disabled and reconfigured RRAS multiple times and that doesn't seem to have made a difference, so can anyone tell me what I'm doing wrong? Thanks.

  Read the article

• Unable to connect to CopSSH when running Windows service, works when running sshd directly

  - by Joe Enos

  I've been using CopSSH (that uses OpenSSH and Cygwin, so I don't know which of the three is the problem) as my SSH server application at home on Windows 7 Ultimate 32 bit. I have used it for about a year with no real problems, other than it sometimes takes 2 or 3 connection attempts to get through, but it's always worked within a few attempts. A few days ago, it just stopped working. The Windows service is still running, and I've rebooted, restarted the service, etc. with no change. On the client (using Putty on Windows), I get the message "Software caused connection abort". On the server, my event viewer registers the following: fatal: Write failed: Socket operation on non-socket I finally got it working, but only by executing sshd.exe directly from the command line on the server. No special flags or options, just straight execution, and then when I connect remotely, it goes through. I do have firewall and anti-virus software which appears to be configured properly, but the fact that things work when running sshd.exe also indicates that the firewall is fine. I thought the service and executable did exactly the same thing, but apparently there's some difference. Does anyone have any ideas on where I should look for the problem? If I can't find something, I suppose I can write a Windows service or scheduled task that fires off sshd.exe directly and ensures that it stays running, but that's kind of a last resort, since it's just wrapping around something that should already work. I appreciate your help.

  Read the article

• APC not caching many files

  - by tetranz

  Hello I have a Drupal site running on a VPS at Linode with PHP 5.2.10 and APC 3.1.6. It never caches more than about 25 files and barely uses any of its available memory. Drupal has hundreds of php files. I have another server where APC seems to work well and does indeed cache hundreds of files. The only difference with that site is that it runs Ubuntu 10.04 and php 5.3.2. The config settings are the same. What could be wrong? I'll paste the config from apc.php below. This is after hitting multiple parts of Drupal. Thanks APC Version 3.1.6 PHP Version 5.2.10-2ubuntu6.5 APC Host xxx.example.com Server Software Apache/2.2.12 (Ubuntu) Shared Memory 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking) Start Time 2010/12/02 11:32:17 Uptime 3 minutes File Upload Support 1 File Cache Information Cached Files 21 ( 1.4 MBytes) Hits 169 Misses 21 Request Rate (hits, misses) 1.00 cache requests/second Hit Rate 0.89 cache requests/second Miss Rate 0.11 cache requests/second Insert Rate 0.17 cache requests/second Cache full count 0 User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1

  Read the article

• Datacenter IP Addressing and DNS Management

  - by user65248

  Hello everyone Basically we are setting up a small Datacenter, about 300 amps power and max 50 racks, Im saying these coz I wanna u imagine the size and requirements, I have studied networking mostly Microsoft and Windows based systems , but I cant get how the IP addressing and DNS management and configuration works in a Datacenter , and unfortunately I have to setup everything by myself but defe we will have some staff to do some job. Now my questions Datacenter IP Addressing Suppose we have got a block of 200 IP addresses from our ISP, How can I manage these block of IP addresses, is there any software out there to simplify this I heard that using DHCP server in a datacenter is not recommended, otherwise what would u say about MS DHCL server ofc considering we need to have backup serversin case of failur How can I assign a block of IPs to a specific rack, I know with different software and management its different but Im asking how it is done normally IP addresses are exposed to the whole network, what if a customer try to use an IP address and is not assigned to their server or rack , how can I prevent this or how can I track the IP usage DNS Management Im goin to setup at least two servers for our DNS servers, I know nothing about Datacenter DNS system, but I have configured DNS server in normal networks and also for webservers, Now I wanna know What exactly needs to be done for a DNS in a datacenter that is not done for normal networks. How can I configure PTR records why cant I configure PTR records on my webserver side DNS server and it should be done on datacenter DNS server , I mean what is the difference in DC DNS servers that allow us to to so , I know the question is very silly and simple but Im confused Is there any software outthere to allow doing the whole thing, I mean automatically add records to the DNS and also managin IP addresses !? Thanks in advance

  Read the article

• Explorer.exe not starting after login on Windows Server 2003 (Terminal Services and console)

  - by Pepperoni Icecream

  When users login to a Windows Server 2003 R2 running Terminal Services they have a blank desktop. Upon inspection, explorer.exe is not running. When I login as administrator, using either RDP or to the console, I am having the same issue. I can pull up the taskman and start explorer.exe manually. I have another Terminal Server setup exactly the same way (same apps, settings, GPO, etc . . .) the only difference is we deployed Symantec Endpoint Client 11.0.5 on Friday. For some reason the working Terminal Server is still on 11.0.4, but the suspect server received the 11.0.5 client upgrade. I checked the eventviewer for any relevant explorer.exe entries to no avail. It seems that if SEP is preventing explorer.exe from starting at login it would do the same for the domain admin starting explorer.exe from the taskman. I disabled the SEP client and services on the server and issued smc -stop and tried logging in again. Still no explorer.exe. So I'm not sure if the client upgrade is relevant but it is worth mentioning since that was the last system change. The 2 servers are members of a NLB group. I took the bad terminal server out of the group until the issue is resolved. Actually stopped the host using NLB manager Any help is appreciated.

  Read the article

• Site to Site VPN problem, connection succesful data only oneway?

  - by Charles

  To start things off, I'm not the actual Administrator for the VPN Server, but he is also at a loss so I thought I'd ask it here. I know it's a Cisco ASA Firewall/VPN. I have a router that connects to the Cisco VPN server, it does so succesfully. I can ping everything within the remote network and from the remote network into my own. I've been able to SSH into a remote server over VPN as well, it all seems to work; until there's some more data returned. A quick example would be an internal webserver. The default homepage simply redirects, so only sends back HTTP headers with a "Location:". I receive this on my computer, but when I request the actual page then (which isn't that big) I don't get a response at all - it just stalls. And it does this for other services as well, for example SSH. I can do a couple of things while connected, but if there's more than xx output it seems to do nothing. The connection remains active throughout all of this. Has anyone ever experienced anything like this before / know what the problem might be? Another user who has a site-to-site connection with this VPN using the -exact same setup- has no problems, the only difference is that I have around 200ms ping to the VPN server/network because of a very long distance (other continent).

  Read the article

• Websites down EC2 inaccessible via SSH CPU utilisation 100% last few hours - what should I do?

  - by fuzzybee

  I have multiple websites hosted on 1 single EC2 instance. 1 website "abc" were down for a few hours, sometimes threw database connection error and sometimes just took too long to respond. 1 website "def" were incredibly slow but still up and running the rest of the websites had the same symptoms has "abc" I can afford 15 min or less down time for "def". Should I then (in AWS console) reboot my instance or create an AMI image from my instance and launch it and associate my elastic IP to the new instance or "launch more like this" Background on what may have happened to my ec2 The last time I made changes for 21 hours ago. A cronjob to create snapshots ran around 19 hours ago and it has been running for a long time. Google Analytics shows traffic to my websites such as kidlander.sg has been nothing exceptional. Is there any other actions I should take or better options I could have? (I have already contacted AWS support but their turnaround is 12 hours so I appreciate all the help I could get) Update I got everything back up and running and CPU utilisation back to normal, around 30%. There is 1 difference between "def" and "abc" as well as my other websites "def"'s database is hosted on RDS "abc"'s database is hosted on an EC2 instance (different from my web server instance) configured by myself Nevertheless, I checked the EC2 instance I'm using as MySQL server yesterday and it was absolutely fine during the incident low CPU ultilisation I could log in using linux command line

  Read the article

• High latency issue for web service call from amazon aws ec2 to local server

  - by SibzTer

  We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

  Read the article

• The best LCD monitors for reading text?

  - by Xeoncross

  I have been using an 19" Acer AL1916A B for several years now. While possibly failing in other areas - the text was incredibly sharp. Which is very important for someone like me that spends all day writing code. My eyes are very finely tuned and I can see refresh rates and even the smallest pixel overflows from anti-aliasing. Unfortunately it finally died. I then tried a 19" widescreen Acer X193w+ and found that the text was much less sharp. I also tried a 19" widescreen Samsung 920nw and was also disappointed. (by the way, widescreen is a great invention for companies - the same price for less screen!). I am looking for a couple of options of LCD's that hands-down render text ultra sharp and clear. This isn't subjective - an LCD either has sharp text or it doesn't. Anyone with delicate eyes can see the difference and knows what I'm talking about. Please also bare in mind that you're vision can adjust to a given screen; rendering your judgment biased if you do not constantly use other monitors also. If you use windows with ClearType enabled please do not reply.

  Read the article

• Windows Service with a Logon user set

  - by David.Chu.ca

  I have a service running in a box with Windows XP and a box of Server (2008). The service is configured as autmactic mode with a logon user/pwd set. The log on user is a local user. The service requires this user setting in order to run. The issue I have right now is that the box intermittently reboot itself. I am going to investigate what is causing the reboot (hardware or application). Regardless the reason, what I need is that the service should be able to recover itself into running state after the reboot. I think the configuration should be able achieve this goal since the user/pwd having been set and its mode being automatic. Do I need to log in as that user to bring the service back? (sometimes the reboot happens in the midnight) I am not sure if there is any difference between Windows XP and Windows Server (2008). The only thing I realize is that when there is a unexpected reboot, the Windows Server will prompt a dialog to explain the previous reboot. Will this prevent any automatic service running or the service will run only the reason has been set?

  Read the article

• Bare-metal virtualisation for the desktop

  - by Andrew Taylor

  Hi, Does anyone have any knowledge about bare-metal virtualisation products? I'm interested in building a new desktop machine for home, I've been looking at the Intel Quad Core processors and I'd like to put 8GB of RAM in there, but, it got me thinking about making the most out of the available resources. I thought if I could get a good 64bit machine, put some bare-metal virtualisation on, then have a primary system, I'd also be able to bring up some extra virtualised systems as and when I needed. I know most of the bare metal systems are designed for the server market, but, is there anything out there that works well for a desktop. What are the caveats? I presume I won't be able to make the most out of any video cards I could buy, what about just getting a decent screen resolution, will this be a problem? I run a single 24" screen. What about DVD/CD writing, is this possible? I'd like to re-rip my CD collection, I was hoping the quad 64Bit goodness would help me out with the encoding. I currently use a Mac and couldn't go back to windows so that leaves Linux, I was thinking a primary OS of ubuntu. Does this make a difference? Thanks Andrew

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >