Search Results

Search found 7164 results on 287 pages for 'powerline networking'.

Page 253/287 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

• Connect macbook to my LAN through a VPN - best solution? [closed]

  - by LewisMc

  So I have a LAN connected via a ADSL/PPPoA, this is using a bog-standard DLink router supplied by my ISP (talktalk UK). I have a NAS within the LAN that is running FreeNAS and I want to be able to connect to it when I'm out and about. It's running an atom so it's quite low on juice consumption but I don't want to have it on all day and night so I've been waking it via a magic packet and booting it down from the web admin when I need it. So I want to connect to the LAN, I presume via a VPN, to be able to send a magic packet. But what is the best method to accomplish this, or is there an easier way? I've been looking at the cisco 857 integrated router and the Netgear prosafe 318(behind modem) but not sure If I'm on the right track with what I want to achieve as I've not much experience or knowledge with VPN's or networking (software engineering student). I have tried port forwarding but to no avail, either with magic packets or even connecting outside the LAN via DYNDNS. Thanks,

  Read the article

• Routing / binding 128 to one server

  - by Andrew

  I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Thank you

  Read the article

• Generic Windows 98 USB Drive drivers?

  - by Electrons_Ahoy

  I've got an old Win98 machine that I'd like to pull some data off of. (Tens of gigs of data, actually.) The machine still runs fine, but due to the age, it doesn't have a cd burner, and the pre-NT networking won't connect to SMB shares without a fair amount of wrenching on the registry that I don't really want to do. What I really want to do is plug in an external USB hard drive and copy the files. But - Win98 didn't ship with generic USB drive drivers, and external drives don't ship with them these days. Can anyone point me at a reputable generic driver I can install?

  Read the article

• Domain account credentials fails to start scheduled tasks

  - by neoco

  I have 2 Windows 2000 servers in a domain 'DC', which run numerous windows scheduled tasks under the 'DC\Task-User' account. These tasks are and have been running successfully in the past couple of years without any account/password modifications. Yesterday, the tasks went to 'Could not start' status. Myself having an admin account, was able to run these tasks with my credentials. Today, I ran the tasks again under the DC\Task-User account and they seem to be running fine without any issues. This has happened in the past too. I'm not into networking so don't know much about the underlying problem. Has this something to do with a Domain controller account authentication? Any pointers will be great!

  Read the article

• Windows 7: How to boot up in normal mode after improper shut down?

  - by Level1Coder

  I work in two different locations and whenever there is a power outage at one of the locations, Windows 7 detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows 7 enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows 7 always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Make user uploads go to different hard drive?

  - by Andrew Fashion

  I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

  Read the article

• Saving Proxy Settings from different networks

  - by elcool

  I go to different clients and they all have their networks with different proxy settings. So I'm always having to change the proxy settings and saving the info in a notebook, and it becomes a pain after a while. So, any good way to save all those proxies and have them recognize the network I'm on and load up? Currently I maintain two: one in IE for clients, and none in Firefox for when I'm at home. And I think the last network I was on asked me to save the proxy and I think it went to system settings. But I don't know much about networking.

  Read the article

• Folder sync application which can sync over Internet (the other machine specified by an IP)?

  - by Adal

  I need to sync some folders between two Win 7 machines. While they are connected to the same LAN, they can't see each-other over Windows Networking since sharing is disabled on both of them (security reasons). Do you know any sync app which can work over IP? The folder I need to sync has 500,000 files in it (80 GB in total), so the sync app should be pretty efficient. At the moment I copy the files from one machine to the other over FTP, but it takes forever, since a separate connection is opened for each file. Or maybe you know some app which can efficiently transfer a large number of files between two machines on the Internet?

  Read the article

• why is this happening?-"dhcpcd will not work correctly unless run as root"

  - by user330317

  i have installed archlinux and gnome on virtualbox. had no problem connecting to internet but now after installing gnome and rebooting there is no internet connection after following instructions from archwiki,i have tried . but i cant figure out the problem please help. host-63drhd% sudo netctl status enp0s3 ? [email protected] - Networking for netctl profile enp0s3 Loaded: loaded (/usr/lib/systemd/system/[email protected]; static) Active: inactive (dead) Docs: man:netctl.profile(5) host-63drhd% sudo netctl enable enp0s3 Profile 'enp0s3' does not exist or is not readable host-63drhd% sudo dhcpcd dhcpcd[1486]: sending commands to master dhcpcd process host-63drhd% dhcpcd dhcpcd[1543]: control_open: Permission denied dhcpcd[1543]: dhcpcd will not work correctly unless run as root dhcpcd[1543]: open `/run/dhcpcd.pid': Permission denied dhcpcd[1543]: control_start: Permission denied dhcpcd[1543]: version 6.3.2 starting dhcpcd[1543]: enp0s3: if_init: Permission denied dhcpcd[1543]: enp0s8: if_init: Permission denied dhcpcd[1543]: no valid interfaces found dhcpcd[1543]: no interfaces have a carrier dhcpcd[1543]: forked to background, child pid 1544

  Read the article

• Trying to figure Windows 2008 Server and Active Directory - complete novice!

  - by Simon E

  I am a novice in networking and I want to learn more about Windows Server 2008 and Active Directory. Basically I have serveral Windows 7 PC's in my home and an IBM server with Win Server 2008 installed. I have enabled Active Directory and set the server to have a static IP. Thats as far as I have got and I feel a little overwhelmed at the moment as I am not sure what to do next. What I eventually want to do is have the Windows 7 PC's to be able to be authenticated by the server - basically a mock up of what most large or medium sized businesses/organisations run. Sorry if I sound a bit sketchy, but I understand some things but not the whole picture, I guess I just need confirmation that I am sort of on the right track :) Also what are some good resources out there you can point me to, what are the absolute basics I need to to get started so I can further my learning?

  Read the article

• KVM guest storage difference with NBD and NFS

  - by WojonsTech

  I am setting up my own little private cloud for my own use maybe for a project or to. I am using linux kvm on debian 6. I have 3 servers 2 of them for compute nodes and 1 storage node. I would I have already installed kvm made a few test machines got my networking setup. I have 2 nics on each server 1 nic is for web traffic other nic is for network traffic. My first Idea was to use NFS for storing the guest machines which can range in size, maybe 8gb maybe 100gb, it just depends. I was doing have heard of nbd before seems like it could work but I dont know what the performance differences are and if it will effect my enviroment, nfs looks like it will be easier to use.

  Read the article

• Workgroup connection: You may not have permission

  - by Afiefh

  I have two Windows XP computers connected through an Ad-Hoc network, computer A creates the network and B connects to it. Both computers are on the Mshome network and have file and printer sharing enabled, and they can ping one another through the adhoc network. The result is that computer A can see computer B, but B cannot see A in the workgroup. But when A tries to access B I get a "you might not have permission to access" error telling me to contact the administrator. I tries to google the error, but most posts talk about problems connecting different versions of Windows to each other. I tried turning off the firewalls on both machines and checking if the required services are running. Nothing helped. Please excuse my ignorance on Windows networking, I haven't used Windows in around 10 years.

  Read the article

• Squid 2.7.6 not honoring ACL rules

  - by peppery

  Hello there, I have a /24 block of IP addresses assigned to a single server that I have been attempting to install Squid on an Ubuntu server machine. All of the IP addresses are set up correctly (aliases of eth0) in /etc/networking and work as they should be, using cURL I can specify an interface and it goes out on the correct address as it should be. I would like Squid to take the incoming IP address the request was sourced to and proxy the request out on the same IP (e.g incoming 123.123.123.1:3128 - 123.123.123.1, .2 - .2, etc) and have set up these ACL rules in /etc/squid.conf acl ip1 myip x.x.x.1 tcp_outgoing_address x.x.x.1 ip1 acl ip2 myip x.x.x.2 tcp_outgoing_address x.x.x.2 ip2 acl ip3 myip x.x.x.3 tcp_outgoing_address x.x.x.3 ip3 and so on, as this seems to be the only way to do what I want (from research). However, after much frustration, Squid seems to be ignoring these rules and sending requests out on the default interface. Does anybody have any suggestions? Thanks.

  Read the article

• How to configure LAMP server for iOS social/chat app?

  - by andufo

  I'm on the last developing phase of a social networking app for iOS that has a chat module. Right now I'm trying to figure out the best way to achieve these features: Send message instantly to another user. If other user is online, delivery should be instantly. If user reads the message, the remitent should be notified of that action. If a user visits my profile, I should be notified instantly. What would be, in your opinion, the best approach to achieve that experience? The server is CentOS 5.6. I've previously reviewed XMPP, sockets, but I'm still unsure on what the best approach is. Any opinions and resources will be much appreciated.

  Read the article

• Windows 7 system CPU bogged by windows services, no explanation

  - by Alex

  I'm looking at a laptop for a colleague which is running terribly slow. A quick look showed that the CPU was 100% used by 2-3 SVCHost processes, which off course doesn't tell much since those are just 'cover' processes with services running underneath them. So I fired up process explorer in hopes of finding a shady rogue service which was bogging the system, but to my suprise I found genuine MS Windows processes (or at least damn-good disguised ones) are bogging down the system: dnscache (DNS Client) IKEEXT (IKE and AuthIP IPSec Keyring modules) iphlpsvc (IP Helper) Seen separately, these processes might seem odd to be using a lot of CPU, but taking a step back one can conclude that all three services are quite closely related to networking. I've tried running: netsh int ip reset log.txt which has helped me save bizarre network-related problems in the past, but this didn't help Off course I though about a virus, but both MS Security Essentials as well as malwarebytes (let both run a full scan).

  Read the article

• Best ways to move a server room and 80 desktops to a new building

  - by Marko

  Need to plan the best way to physically move a server room (12 IBM x3400 towers) and all associated networking equipment to a new building. Everything is going, comms (80 strong call centre operation), desktops(80-90) the whole lot and has to be done efficiently over a weekend. What I cant seem to find are the best ways to move equipment, i.e is it best to remove hard drives and pack them separetely, do I pack the chassis' with foam and/or surround them in bubble wrap? Are there specific products designed to move computer equipment and where would I find these. The internet has failed me so far, please help

  Read the article

• Question about getting information off an old HD...

  - by user37983

  Ok so my old cpu was a sony vaio. its kinda old and had xp on it. My gf thrashed it - the cd drive went and she tried fixing it by messing with the configurations bios etc. the actual laptop is really fried the keyboard doesnt work, etc. However the harddrive is still intact. I tried putting the HD in my new cpu (toshiba runnig win7) and it looks like its gonna boot up it goes to the screen with the logo and the status bar starts to load. then it flashes a blue screen for a split second, and goes to the black screen where it says windows did not shut down properly and gives options to (start windows normally, safe mode, safe mode with networking, safe mode with prompts) ive tried every option but it always goes back to this screen. I need to get into the hd cuz i have very important files. is there anyway?

  Read the article

• Windows XP: How to boot up in normal mode after improper shut down?

  - by Nick

  I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• Server 2008 Hyper-V User Accounts to access each other

  - by asn1981

  Hi, I have a windows server 2008 r2 with 3 hyper-v vm's IIS server Sql server 3 - Mail server I'm new to networking/server configuration. I have created a Virtual Network and can see each of the 3 VMs as well as the host on the network. I can connect from each VM to the host using the admin account. However, what would be the best (secure) way to create connections/accounts between the VMs, presumabely this shouldn't be done with an admin account but one with lesser priveledges. For example, to be able to access the SQL Server VM from the IIS server VM?

  Read the article

• Random Connections to MySQL refused (Error 111)

  - by joatis

  A Perl/CGI webapp that has been running fine for almost a year has started to randomly been unable to connect to a remotely hosted MySQL. The Error thrown is : Can't connect to MySQL server on 'xx.x.xxx.xx' (111) Reloading the page often solves the problem The client is using Perl, DBI and SSL to connect to MySQL using the same configuration file each time. MySQL 5.0 Server Running RH EL5 Quad-Core AMD Opteron(tm) Processor 2374 HE, 8 cores Real Memory: 15.73 GB total, 11.81 GB used allows networking in my.cnf max-connections are not being met load is low. The servers firewall is open to the client's subnet. The mysql user has permissions from the client's subnet. I have my host looking into the problem but so far we're all stumped as to way the occasional connection is (increasingly getting refused) Any advice what to check that would cause the random refusal of connections?

  Read the article

• Dedicated server given, how to start?

  - by eduardito

  Hello, I've been given a dedicated server. Unfortunately, I have no idea what to do / how to manage it. I have background in many fields on Computer Science but never got to focus on networking, server management, etc. What I'm asking is for recommended books, Basically, I would like to be able to be proficient and understand well how to manage domain names, zones, setting up mail servers, being able to install easily any web server, and such. Everything needed for proper server management through the shell. I will probably stick with Parallels, or Cpanel for a bit. But I dislike those, especially how it add a lot of intruding user accounts and configs on the file system. Thank you

  Read the article

• Could 11.5 Million 401's be causing bottlenecks?

  - by roviuser

  I'm going to preface this with a warning: My knowledge about servers and networking is VERY limited, and if you provide me with technical answers, I probably won't understand much until I research your answer further. I'm trying to expand my knowledge and learn about it, though. If the information that I am able to provide in this question is insufficient to answer the question, I understand, and it can be closed. We have a SharePoint 2007 system that is extremely slow, mostly from huge amounts of use. We've been told that the main speed bottleneck is the access to the sql databases. However, they do provide a statistics dashboard, so I did some poking around, and noticed that we have 11.5 million or more 401 - access denied errors every month. Could this be causing major speed/performance decreases? Authentication for sharepoint uses active directory.

  Read the article

• Hyper-V with a single host NIC

  - by Cylindric

  I'm trying to create a simple Hyper-V test machine, and am having more problems than expected with the basic networking. All other hypervisors I've used (vmware server, vmware player, virtualbox) allow me to use the default single NIC in my machine, and then create guests with "bridged" mode so they appear like a normal machine on the network. With the Hyper-V server, when I create a Virtual Switch and set it to "external", I lose all network access from the host. The solutions I've seen online seem to rely on complex configurations requiring multiple vSwitches and RRAS on the host to get it going. Is it really that complex to get a simple, single-NIC Hyper-V server going, in such a way that I can still use the host? The host is Windows 8.

  Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >