Search Results

Search found 11930 results on 478 pages for 'shared machines'.

Page 254/478 | < Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >

• Will I need a dedicated static IP or a unique IP is enough to SSL enable my website?

  - by Devner

  Hi, This is the first time I am dealing with SSL and Dedicated Static IP /Unique IP. Now this webhost says that they will provide Unique IP (not shared with other customers) but do NOT guarantee that it will be static. Now I plan to make my website SSL enabled and install a SSL certificate. So in order to SSL enable my website, will I really need a Dedicated Static IP or will this Unique IP (without the guarantee that it will be static) be enough? What problems will I need to face if the IP is not static? I have already bought hosting from them. And they showed me that option while adding optional services to the account (after I placed my order), so I did not even have a clue about this. Thank you all in advance.

  Read the article

• P4 vs. i3/i5 *T in power consumption and performance [migrated]

  - by Walter Zomb

  I am running an Intel P4 prescott with HT on my home server (linux file server on encrypted disks on software-RAID5 and virtualisation host for three further machines). The performance for this purpose is really okay. When the system is idle it consumes about 140W power. I am considering buying a new mainboard for an e.g. Intel i3-2100T or an Intel i5-2390T. Both are low power CPUs with a TDP about 40W. Has anyone experiences how much power a recent mainboard with one of these CPUs an 3-4 'green-energy' disks (6W each) consumes? Do I get underneath the 100W threshold? What's about the performance of these low power CPUs? Are they comparable to an Intel P4 with HT? regards, walter

  Read the article

• associate dhcp requests with subdomains in dnsmasq

  - by Dezra

  I have dnsmasq running as a dns server with a number of linux boxes using static ips that run several virtual hosts on subdomains. I currently have the following address line in my dnsmasq.conf to map the subdomain of a boxes address to the boxes static ip: address=/.devbox1.mydomain.com/192.168.1.3 address=/.devbox2.mydomain.com/192.168.1.4 e.g. site1.devbox1.mydomain.com > maps to devbox1 static ip, site1 virtual host site2.devbox1.mydomain.com > maps to devbox1 static ip, site2 virtual host site3.devbox2.mydomain.com > maps to devbox2 static ip, site3 virtual host I was wondering if I can change the machines over to DHCP addresses (instead of static) and have dnsmasq use the dhcp ip instead of the static one? Can I modify the address line to refer to the DHCP address (obviously, I cant hardcode the address)? I know I could add mac address to ip allocation, but I want to avoid this if possible.

  Read the article

• SNMPD timeout yet netcat shows port as open

  - by Kirill Gordeenko

  SNMPD config (I have this config working on a different server): com2sec readonly default public group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly view all included .1 80 access MyROGroup "" any noauth exact all none none syslocation <LOCATION> syscontact <CONTACT> When I check the port from remote machine: » nc -zvu xx.xx.xx.xx 161 Connection to xx.xx.xx.xx 161 port [udp/snmp] succeeded! This also works locally (I get all the right stats): snmpwalk -v 2c -c public localhost Yet when I try same command locally or remotely with external IP: Timeout: No Response from xx.xx.xx.xx IPTables are disabled on both machines. /etc/sysconfig/snmpd looks like this: OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid" -a /etc/default/snmpd is empty.

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• Amazon EC2, fastest way to get a node into an existing cluster

  - by imaginative

  I'm new to Amazon AWS. A lot of the time I hear about people folks spawning instances and almost instantly putting them behind a load balancer and into an existing cluster. In the traditional world of managed machines, this would include provisioning hardware, installing an OS, configuring the network on the machine and once the network is available, use a tool of your choice such as CFengine, Puppet or Chef to bootstrap the machine based on its class. It seems like there are "shortcuts" that are able to get a server of a particular class up and running in Amazon EC2. If I have a particular stack running on my server, such as erlang, tomcat6 etc.. what's the fastest way to get these up and running and hooked into Amazon's load balancer? From network, to software stack to kernel tuning? Is it a combination of creating an AMI then running a tool like Puppet against the new instance? Any idea

  Read the article

• Permission forbidden on localhost with apache2

  - by N Alex

  Here is what I am trying to do. I tried to add another folder to apache and I get the following error when trying to acces testing/index.html. The idea is that I would like to have for every customer a folder like /home/neagoe/Work/InterWebs/Projects/[PROJECT NAME]/CustomerProjects/website/dist. Forbidden You don't have permission to access /index.html on this server. Apache/2.2.22 (Ubuntu) Server at testing Port 80 Here are the steps that I followed: Step1: sudo chmod a+x /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step2: sudo chown -R www-data:www-data /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist sudo chmod -R 775 /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step3: sudo adduser $USER www-data Step4: sudo a2enmod userdir Step5: sudo cp /etc/apache/sites-available/default /etc/apache/sites-available/testing I edited the file /etc/apache/sites-available/testing so it looks like this: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName testing DocumentRoot /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Step6: I edited hosts ("/etc/hosts") so it looks like this: 127.0.0.1 localhost 127.0.0.1 testing # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Step7: sudo a2ensite testing sudo service apache2 restart I searched for about 2 hours on the internet but I can't figure out what went wrong. All the pages that I found following the same steps as described above. I know there are similar questions here on the internet, but the answer is to change permission to the directory which I did on Step2. I am sorry if this is really a duplicate but I could't find the right answer. Thank you! PS. I asked this also on AskUbuntu but didn't get any answers so I'm trying my luck here. Edit: There isn't much on the error log or the access log. On the access.log: ::1 - - [10/Aug/2013:11:23:28 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:29 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:31 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:32 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:33 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:34 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:35 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:23:23 +0300] "POST /wordpress-testing/wp-cron.php?doing_wp_cron=1376123003.7026669979095458984375 HTTP/1.0" 200 705 "-" "WordPress/3.6; http://localhost/wordpress-testing" ::1 - - [10/Aug/2013:11:23:36 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:37 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:38 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:31:32 +0300] "GET /index.html HTTP/1.1" 200 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:23.0) Gecko/20100101 Firefox/23.0" And the last line repeats for about 200 rows. On the error.log: 1. This lines repeat from time to time. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525 /msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:06:42 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations [Sat Aug 10 13:07:36 2013] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:07:37 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations 2. And this is the predominant error. (hundreds of lines) [Sat Aug 10 13:07:40 2013] [error] [client 127.0.0.1] (13)Permission denied: access to /index.html denied

  Read the article

• SELinux Contexts

  - by Josh

  I am configuring Apache\PHP and noticed Apache complaining about permissions with the php shared object. Starting httpd: httpd: Syntax error on line 206 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib/httpd/modules/libphp5.so into server: /usr/lib/httpd/modules/libphp5.so: cannot restore segment prot after reloc: Permission denied I looked at the context (started fine with enforcement off) and found: [root@HDSSERVER conf]# ls --lcontext /usr/lib/httpd/modules/libphp5.so -rwxr-xr-x 1 root:object_r:httpd_modules_t root root 15565418 May 10 08:39 /usr/lib/httpd/modules/libphp5.so Shouldn't httpd (apache) be able to access files with a context of httpd_modules_t? I got it fixed by applying chcon -t textrel_shlib_t '/usr/lib/httpd/modules/libphp5.so' But I would think the httpd version would work before this one. Can someone explain this to me?

  Read the article

• creating a journal/blog

  - by DijnsK

  hi, im trying to replace our current journal (excel sheet) with a web portal based journal. something kind of like twitter, but with more options. also needs to have a login so we can track the people entering. it can also be some sort of tool but i cant find anything that meets our demands... i could use a ITIL ticket service but that has way to much functionalities for our use. im basicly looking for a webportal with a shared blog, where users can login and creat new entries with: a topic name a automated follow-up ID number a field where they can enter specific info a reply field and a status field with pre defined statuses can anyone help me with this? thanks in advance. Koen

  Read the article

• Mod_rewrite not working on ISPConfig 3 Server

  - by Akahadaka

  Problem I recently migrated a Drupal site from a shared hosting server to my own VM. Everything appears to work correctly, except clean urls. My VM Setup Ubuntu 10.04 LAMP ISPConfig 3 What I've tried From reading up on a number of drupal forums I've tried the following in this order Check that mod_rewrite is installed and enabled Changed PHP from FastCGI to Mod_PHP (prefer to use FastCGI or suPHP though to avoid having tmp/files folders with 777 permissions) Changed the Redirect type to L in ISPConfig Sites-domain.com-Redirect Changed /etc/apache2/sites-enabled/000-default <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All ... </Directory> Not sure about points 3 and 4, I do want all domains to be able to use mod_rewrite out of the box. Question Have I done something wrong or am I missing a step? Ultimately I would like to use FastCGI and clean urls working on all ISPConfig 3 domains without having to make any changes to individual domain settings. Any ideas appreciated, I'll try them all.

  Read the article

• Reset user passwd when you don't know it

  - by warren

  I have a small problem. I have shared keys setup on my domain, so I never type my password to login anymore. I've forgotten my password now. This is a problem because only my user can sudo. Password authentication for root has been disabled, so without my password, I cannot do maintenance on my web server. Is there a way to reset my password as my [now only] key-authenticated user? Specifically, can this be done on CentOS 4?

  Read the article

• Mysql-proxy compile in CentOS

  - by gtfx

  Hey, While trying to compile Mysql-Poxy i get the following error. By the instructions here Libtool library used but `LIBTOOL' is undefined The usual way to define `LIBTOOL' is to add `AC_PROG_LIBTOOL' to `configure.in' and run `aclocal' and `autoconf' again. If `AC_PROG_LIBTOOL' is in `configure.in', make sure its definition is in aclocal's search path Libtool installed from source. Running aclocal get's no error. running ./configure ./configure: line 5821: AC_DISABLE_STATIC: command not found ./configure: line 5823: AC_PROG_LIBTOOL: command not found checking shared library path variable... configure: error: eval "libtool --config | grep ^shlibpath_var" failed Running libtool command libtool --config | grep ^shlibpath_var shlibpath_var=LD_LIBRARY_PATH What am i missing? Thank you for your time.

  Read the article

• Sending mail to local address crashes web server (sendmail)

  - by deceze

  When trying to send mail automatically from a script at example.com via PHP's mail() to [email protected], the Apache server throws an Internal Error. I believe internally it is configured to use sendmail. The message gets dropped into ~/dead.letter and the general error log reads: [Wed May 12 11:26:45 2010] [error] [client xxx.xxx.xxx.xxx] malformed header from script. Bad header=/home/example/dead.letter... S: /home/example/www/test.php Trying any other address, not @example.com, works just fine. I have googled and serverfaulted for solutions, but they all require to edit configuration files in /etc/mail and similar system places, which is not an option, since this problem occurs on a shared host in which I only have access to ~/. Does anyone have a suggestion?

  Read the article

• What's the best way to clean up after a fork bomb?

  - by raldi

  $ ls bash: no more processes Uh oh. Looks like someone made a fork bomb. Where I used to work, this pretty much meant that the shared server would need to be power-cycled, since even the sysadmins with root often couldn't get the problem cleaned up. Often, they couldn't even get a prompt. I've heard a few tricks (notably, to send STOP signals rather than KILL signals, since the latter would allow the remaining threads to immediately replace the killed ones), but I've never seen a comprehensive guide entitled So, You Have Yourself a Fork Bomb? Let's make one.

  Read the article

• How can I remove HTTP headers with .htaccess in Apache?

  - by Daniel Magliola

  I have a website that is sending out "cache-control" and "pragma" HTTP headers for PHP requests. I'm not doing that in the code, so I'm assuming it's some kind of Apache configuration, as suggested by this question (you don't really need to go there for this question's context) I don't have anything in my .htaccess files, so it's gotta be in Apache's configuration itself, but I can't access that, this is a shared hosting, I only have FTP access to my website's directory. Is there any way that I can add directives to my .htaccess files that will remove the headers added by the global configuration, or otherwise override the directive so that they're not added in the first place? Thank you very much Daniel

  Read the article

• MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

  - by TheLizardKing

  So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

  Read the article

• ffmpeg add two audio streams to video

  - by Tossin Hausen

  I tried this: ffmpeg -i /sdcard/video/transcode/video.avi -map 0:0,0 -i /sdcard/video/transcode/first.mp3 -map 1:0,1 -i /sdcard/video/transcode/second.mp3 -map 2:0,2 -acodec copy -vcodec py /sdcard/video/transcode/Output.avi to add two audio streams to one video file. But ffmpeg says the number of mappings should match the number of output streams. What is wrong here? I'm trying to work with an Android build of FFmepg "ffmpeg for android beta". "Does not work" means that this uncommunicative Android build of FFmpeg just stops without giving any error message. The -codec copy option does not work with this build. Now I tried the same set of files with the FFmpeg called command line tool that comes with Ubuntu 10. Something (can't say where it is from). The -codec copy option does not work with this FFmpeg too. Here the complete output: m30x:~/movie/Film$ ffmpeg -i input.avi -i first.mp3 -i second.mp3 -map 0 -map 1 -map 2 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x93cfd10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Input #2, mp3, from 'second.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #2.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Number of stream maps must match number of output streams Merging only one audio stream with the video stream works with Ubuntu and Android version of FFmpeg. Here the complete output: ffmpeg -i input.avi -i first.mp3 -map 0 -map 1 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x9bfad10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 576x432, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: libmp3lame, 22050 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #1.0 -> #0.1 Press [q] to stop encoding frame= 6157 fps=6156 q=-1.0 size= 31667kB time=246.28 bitrate=1053.3kbits/s Do you have an idea why it does not work with two audio streams? By the way, ffmpeg -i input_with_first_audio_stream.avi -i second.mp3 -acodec copy -vcodec copy output_two_audio_streams.avi -newaudio works with both versions of ffmpeg that I use, but the first audio stream is played too fast (x10 or more), while the second audio stream is played correct. Many thanks in advance and sorry for my unconventional question and outdated versions of ffmpeg. But I am a lamer and it is not so easy for me to compile from the source (especially for the Android version). I will try to compile an up to date version of ffmpeg with Ubuntu, but I don't have much free time.

  Read the article

• Bridge and OpenVPN with shorewall

  - by Javier Martinez

  I have this scenario and everything it's working OK, but I want to configure my Shorewall and I can't do it. My interfaces are: br0 (bridge of eth0) tun0 (OpenVPN) vnet* (each one of bridged interfaces with public IP's) Public Main IP: 188.165.X.Y OpenVPN IP's: 172.28.0.x Bridge: public ip's So, I have the next configuration for shorewall: /etc/shorewall/zones #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall inet ipv4 road ipv4 /etc/shorewall/interfaces #ZONE INTERFACE BROADCAST OPTIONS inet br0 detect routeback road tun+ detect routeback /etc/shorewall/policy #SOURCE DEST POLICY LOG LIMIT: CONNLIMIT: # LEVEL BURST MASK $FW all ACCEPT inet $FW DROP info road all DROP inet road DROP /etc/shorewall/tunnels #TYPE ZONE GATEWAY GATEWAY # ZONE openvpnserver:1194 inet 0.0.0.0/0 The problem is that even with shorewall running I am able to ping or connect to the virtual machines behind the bridge

  Read the article

• FCGI & recompiling python code without restarting apache.

  - by Zayatzz

  Hello At one hosting company, they used to run python projects with fcgi. They had set it up so that when i changed django.fcgi file, which put django & my project on pythonpath, my project code was instantly recompiled. Because of that a friend set up hosting for our shared project in his server using fastcgi. It has been set up and the python scripts execute as they should, but what we do not know is, how to set it up so that my project would be recompiled when my setup file has been changed. Alan

  Read the article

• Easy way to restrict permissions in an elementary school computer lab?

  - by Andrew

  I'm putting together an elementary school computer lab. I have nine winxp pro machines that are not networked and do not have internet access (no money to do either). I've created separate student and admin accounts, and have the students set as limited users. However, I'm interested in further restricting their permissions. I want to make it such that they cannot: -delete any files, even just from their own profile -rename any files -move around the icons on the desktop -change any display settings -access a usb device without a password (they bring in their own from home which are chock-full of viruses) Oh, one last thing, they still have to be able to save word documents. Is this even possible? I can download software, but, like I said: no internet, no server.

  Read the article

• NIC: Changing Link Speed & Duplex to Full Duplex Is Drastically Slower

  - by rism

  I have an old Win Xp box with a 100 PRO/100 VE NIC and connecting to a Win 7 box with gigabit NIC via an ASUS gigabit router and peer to peer. I was getting 76% network utilisation on the XP machine using AUTO as the value for Link Speed and Duplex which is fine. But I decided to see what would happen if i selected Full Duplex 100Mbps on the XP box. I thought at worst it would be as good as auto detect since the Win 7 box it's transferring to is faster. Instead network utilisation dropped to 0.12% (as in a 10th of a percent) and the transfers just timed out. No biggie to reverse back to Auto but my question is why is full duplex such a dog? Im not "stuck" but just dont understand. There are only 2 machines here connecting through a router so i cant see how that would cause alot of collisions etc (if thats the problem).

  Read the article

• How can I share a video file during a webinar?

  - by Brien Malone

  Here is the scenario: I have a number of remote employees around the globe. I want to have a video chatting session. No problem there. Halfway through, I want to shut off all camera video feeds and simulcast (synchronous) a training video to my team. How do I do this? We have tried office communicator, but the frame rate was awful and no audio. Adobe Connect had similar trouble. In both cases we were limited by the main office's small internet pipe, but it is clear that video delivered by shared desktop is not a good solution.

  Read the article

• What is the most suitable way to manage iSCSI storage for Virtual Environments?

  - by Gabriel Talavera

  We are planning to place a HP MSA P2000 with two FC/iSCSI controllers in our network. We have two options to provide more storage to Virtual Machines (We are running Hyper-V): A) Add iSCSI targets to the Virtual Hosts and then create VHD that we would add to each guest server. B) Directly add iSCSI targets in each guest server. Just wondering if one of those options is better than the other, and which is the common practice in a virtualized environment. Thanks in advance for any input!

  Read the article

• Mac internet problems

  - by Bradley Herman

  Our office is set up with mostly macs (7 of them) but we do have a windows laptop and a windows desktop on the network as well. The network is configured with a modem going into a switch/router throughout the office to the computers, along with a wireless router. Everything runs fine most of the time, but periodically while using the web, certain sites will stop loading and timeout repeatedly. This usually lasts 20 minutes or so and can be incredibly annoying. Resetting the modem/router and/or rebooting the computer never helps. The weirdest part is that in almost every case, the websites are fine on our Windows machines. I frequently use github, google, Stack Overflow, and jQuery reference and I can count on the sites being unavailable to me at least once a day. While I can't get them to load, I can spin my chair around to the windows server behind me and load the sites just fine. Any idea what the hell could be going on here?

  Read the article

• Fabric and cygwin don't work with windows UNC paths

  - by tcoopman

  I have some strange problems with fabric deployment to Windows Server 2008r2. The thing I try to accomplish is to copy some files to a shared folder with a fabric script (this script does a lot of other things too, but only this step gives me problems). This is the problem: When I try to access a UNC(Universal Naming convention) path I always get access denied kind of answers if I run the script in fabric. When I run the command in an ssh prompt (same user) it works fine. Examples: cmd: robocopy f:/.... //share result: in ssh this works fine, in fabric I get "Logon failure: the user has not been granted the requested logon type aat this computer." cmd: cd //share result: in ssh this works fine, in fabric I get "//share: Not a directory" Further information: uname -a and whoami return exact the same thing in fabric and ssh. I also tried things like mount, net use, but these commands all have kind of the same problem.

  Read the article

< Previous Page | 250 251 252 253 254 255 256 257 258 259 260 261  | Next Page >