Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 255/1206 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

  • Can we sniff packets between 2 machines in a network from a third machine using wireshark or etherea

    - by coolcake
    I have a small network in which there are 2 electronic devices and one desktop connected using a switch. Through the desktop with Ethereal/wireshark installed on it, can I sniff the packets that are being communicated between the 2 electronic devices? I cannot install ethereal or wireshark on either of the electronic devices, but need to monitor the traffic between the 2 devices from my desktop, which is connected via the same switch.

    Read the article

  • Other than UDP Broadcast or Multicast, what other methods can I use on a WiFI network to discover co

    - by Gubatron
    I've implemented a simple ping/pong protocol to discover other computers connected to the same WiFI router. This works fine on many routers, but it seems some public routers have UDP traffic blocked or disabled. What other options do I have to discover the computers connected to the router? I was thinking of brute forcing TCP attempts (trying to open connections to all possible IPs on my subnetwork) but this would be very costly and I would have to cycle several times and still not find every machine that's recently connected to the network.

    Read the article

  • How can I check the network connection type using the Windows API?

    - by Jufkey
    How can I programmatically retrieve the current connection type (eg. LAN or Direct connection)? InternetGetConnectedState() isn't very reliable. For instance, I'm connected to a wireless network, but ConTypeRet is 18, which is INTERNET_CONNECTION_LAN & INTERNET_RAS_INSTALLED. Isn't there any way to make sure that ConTypeRet is either INTERNET_CONNECTION_LAN or INTERNET_CONNECTION_MODEM?

    Read the article

  • Insufficient Permissions Problems with MSDeploy and TFS Build 2010

    - by jdanforth
    I ran into these problems on a TFS 2010 RC setup where I wanted to deploy a web site as part of the nightly build: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (3481): Web deployment task failed.(An error occurred when reading the IIS Configuration File 'MACHINE/REDIRECTION'. The identity performing the operation was 'NT AUTHORITY\NETWORK SERVICE'.)  An error occurred when reading the IIS Configuration File 'MACHINE/REDIRECTION'. The identity performing the operation was 'NT AUTHORITY\NETWORK SERVICE'. Filename: \\?\C:\Windows\system32\inetsrv\config\redirection.config Error: Cannot read configuration file due to insufficient permissions  As you can see I’m running the build service as NETWORK SERVICE which is quite usual. The first thing I did then was to give NETWORK SERVICE read access to the whole directory where redirection.config is sitting; C:\Windows\system32\inetsrv\config. That gave me a new error: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Web\Microsoft.Web.Publishing.targets (3481): Web deployment task failed. (Attempted to perform an unauthorized operation.) The reason for this problem was that NETWORK SERVICE didn’t have write permission to the place where I’ve told MSDeploy to put the web site physically on the disk. Once I’d given the NETWORK SERVICE the right permissions, MSDeploy completed as expected! NOTE! I’ve not had this problem with TFS 2010 RTM, so it might be just a RC issue!

    Read the article

  • Problems compiling scangearmp

    - by maat
    I have already installed some missing packages, but i still get that error. Can anyone help me identify what is missing ? Thanks a lot psr@psr-EasyNote-TM85:~/Downloads/scangearmp-source-2.10-1/scangearmp$ make make all-recursive make[1]: Entering directory `/home/psr/Downloads/scangearmp-source-2.10-1/scangearmp' Making all in po make[2]: Entering directory `/home/psr/Downloads/scangearmp-source-2.10-1/scangearmp/po' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/psr/Downloads/scangearmp-source-2.10-1/scangearmp/po' Making all in backend make[2]: Entering directory `/home/psr/Downloads/scangearmp-source-2.10-1/scangearmp/backend' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=1 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp_tools.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp_tools.Tpo -c -o libsane_canon_mfp_la-canon_mfp_tools.lo `test -f 'canon_mfp_tools.c' || echo './'`canon_mfp_tools.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=1 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp_tools.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp_tools.Tpo -c canon_mfp_tools.c -fPIC -DPIC -o .libs/libsane_canon_mfp_la-canon_mfp_tools.o canon_mfp_tools.c:40:17: fatal error: usb.h: No such file or directory #include ^ compilation terminated. make[2]: *** [libsane_canon_mfp_la-canon_mfp_tools.lo] Error 1 make[2]: Leaving directory `/home/psr/Downloads/scangearmp-source-2.10-1/scangearmp/backend' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/psr/Downloads/scangearmp-source-2.10-1/scangearmp' make: *** [all] Error 2 psr@psr-EasyNote-TM85:~/Downloads/scangearmp-source-2.10-1/scangearmp$

    Read the article

  • Windows 7 intermittently drops wired internet/lan connection.

    - by CraigTP
    In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

    Read the article

  • Php pdo_dblib - cannot find/unable to load freetds

    - by MaxPowers
    Self-hosted box, RHEL 6 PHP 5.3.3 PDO installed freetds installed pdo_dblib - so far no luck installing My goal is to use PDO with sybase. Attempting to install pdo_dblib from the appropriate version php source code. I have tried a variety of methods and searched quite a bit for help on this topic, but have yet to be successful. Method 1 Install freetds $ ./configure $ make $ su root Password: $ make install This is successful Install pdo_dblib inside the /ext/pdo_dblib folder: $ phpize $ ./configure $ make $ make test Error output: PHP Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 That doesn't look good...I researched this and found an interesting hack for this here. But changing pdo.ini to pdo_0.ini was not the solution, as I still got the same errors on make test. $ su $ make install Output: Installing shared extensions: /usr/lib64/php/modules/ That seems strange...and no, it doesn't actually install (not showing up on phpinfo after apache restart). Method 2 Install freetds following the instructions exactly, i add the prefix $ ./configure --prefix=/usr/local/freetds $ make $ su root Password: $ make install This is successful Install pdo_dblib inside the /ext/pdo_dblib folder: $ phpize $ ./configure --with-sybase=/usr/local/freetds This produces the following error at the bottom of the output ... checking for PDO_DBLIB support via FreeTDS... yes, shared configure: error: Cannot find FreeTDS in known installation directories Method 3 freetds ./configure variation (including or not include the --prefix...) did not change the result of this so I'll skip it. Install pdo_dblib pecl extension following the method specified here. pecl download pdo_dblib tar -xzvf PDO_DBLIB-1.0.tgz Removed the line, <dep type=”ext” rel=”ge” version=”1.0?>pdo</dep> Saved the package.xml file, and moved it in to the PDO_DBLIB directory. mv package.xml ./PDO_DBLIB-1.0 Navigated to the PDO_DBLIB directory, then installed the package from the directory. cd ./PDO_DBLIB-1.0 pecl install package.xml But, this command gives me the following error output, same as Method 2. checking for PDO_DBLIB support via FreeTDS... yes, shared configure: error: Cannot find FreeTDS in known installation directories ERROR: `/home/sybase/Install_items/pecl_pdo_dblib/PDO_DBLIB-1.0/configure' failed

    Read the article

  • Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

    - by Jeff
    Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

    Read the article

  • Cannot get realtek8188ee to work in 14.04

    - by dang42
    I have a Toshiba Satellite C55-A5300 laptop. When I run lspci -nn it shows 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01) It has always had the common problem others have asked about here (and many, many other places on the web) where it would connect, then drop the connection at random intervals. I tried every solution I could find, here & elsewhere, and they always caused errors after running "make" (more details below), but as I could still connect to networks I just dealt with it. I upgraded to 14.04 a few days ago and now it won't connect at all - I need help getting this to work. I originally followed the instructions posted by chili555 found here: Wireless not working on Toshiba Satellite C55-A5281, but I get the following errors when running "make": /home/dan/backports-3.11-rc3-1/net/wireless/sysfs.c:151:2: error: unknown field ‘dev_attrs’ specified in initializer .dev_attrs = ieee80211_dev_attrs, ^ /home/dan/backports-3.11-rc3-1/net/wireless/sysfs.c:151:2: warning: initialization from incompatible pointer type [enabled by default] /home/dan/backports-3.11-rc3-1/net/wireless/sysfs.c:151:2: warning: (near initialization for ‘ieee80211_class.suspend’) [enabled by default] make[6]: * [/home/dan/backports-3.11-rc3-1/net/wireless/sysfs.o] Error 1 make[5]: [/home/dan/backports-3.11-rc3-1/net/wireless] Error 2 make[4]: [module/home/dan/backports-3.11-rc3-1] Error 2 make[3]: [modules] Error 2 make2: [modules] Error 2 make1: * [modules] Error 2 make: * [default] Error 2 I have no clue how to diagnose the problem or how to proceed from here. I also don't know what information one might need from me in order to move forward. I'll be happy to share anything you'd like to know if it results in this thing (finally!) working properly. Thanks in advance for any / all help. ETA: I did see this post - Realtek 8188ee wireless driver SOLVED - and it looks like it is discussing the same problem I'm having, but I cannot for the life of me figure out what I had to add the testing repository to my /etc/apt/sources.list means, so I am still stuck.

    Read the article

  • How to permanently add wireless interfaces with iw

    - by walli
    How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

    Read the article

  • SRs @ Oracle: How do I License Thee?

    - by [email protected]
    With the release of the new Sun Ray product last week comes the advent of a different software licensing model. Where Sun had initially taken the approach of '1 desktop device = one license', we later changed things to be '1 concurrent connection to the server software = one license', and while there were ways to tell how many connections there were at a time, it wasn't the easiest thing to do.  And, when should you measure concurrency?  At your busiest time, of course... but when might that be?  9:00 Monday morning this week might yield a different result than 9:00 Monday morning last week.In the acquisition of this desktop virtualization product suite Oracle has changed things to be, in typical Oracle fashion, simpler.  There are now two choices for customers around licensing: Named User licenses and Per Device licenses.Here's how they work, and some examples:The Rules1) A Sun Ray device, and PC running the Desktop Access Client (DAC), are both considered unique devices.OR, 2) Any user running a session on either a Sun Ray or an DAC is still just one user.So, you have a choice of path to go down.Some Examples:Here are 6 use cases I can think of right now that will help you choose the Oracle server software licensing model that is right for your business:Case 1If I have 100 Sun Rays for 100 users, and 20 of them use DAC at home that is 100 user licenses.If I have 100 Sun Rays for 100 users, and 20 of them use DAC at home that is 120 device licenses.Two cases using the same metrics - different licensing models and therefore different results.Case 2If I have 100 Sun Rays for 200 users, and 20 of them use DAC at home that is 200 user licenses.If I have 100 Sun Rays for 200 users, and 20 of them use DAC at home that is 120 device licenses.Same metrics - very different results.Case 3If I have 100 Sun Rays for 50 users, and 20 of them use DAC at home that is 50 user licenses.If I have 100 Sun Rays for 50 users, and 20 of them use DAC at home that is 120 device licenses.Same metrics - but again - very different results.Based on the way your business operates you should be able to see which of the two licensing models is most advantageous to you.Got questions?  I'll try to help.(Thanks to Brad Lackey for the clarifications!)

    Read the article

  • sudo -i not behaving as expected

    - by jpdoyle
    Why sudo -i command is not setting the TERM, PATH, HOME, SHELL, LOGNAME, USER and USERNAME on my fresh Ubuntu 12.04.1 LTS as decribed in the manual? # sudo -u johnny -i echo $HOME && echo $USER /root root Using -H is not setting $HOME either. And my user does exist with a home : # cat /etc/passwd [..] johnny:x:1000:1000::/home/johnny:/bin/bash Update : Why am I having this issue? Because I am trying to create an ubuntu upstart job for multiple unicorn applications & I am using user installation of RVM + Bundle : without $HOME being properly evaluated, RVM do not find ~/.rvm.

    Read the article

  • Segmentation Fault (11) with modwsgi on CentOS 5.7 when running pyramid app

    - by carbotex
    I'm getting Segmentation fault error when trying to access the "Hello World" pyramid app. This error only occurs when running against CentOS 5.7 setup, but no problem whatsoever when tested against OSX and Arch Linux. Could it be a CentOS specific issue? [error] [client 10.211.55.2] Premature end of script headers: pyramid.wsgi [notice] child pid 31212 exit signal Segmentation fault (11) I have tried to follow the troubleshooting guides posted here http://code.google.com/p/modwsgi/wiki/InstallationIssues which suggests that it might caused by missing Shared Library. A quick check reveals that shared library is not the issue. [centos57@localhost modules]$ ldd mod_wsgi.so linux-gate.so.1 => (0x00e6a000) libpython2.7.so.1.0 => /home/python/lib/libpython2.7.so.1.0 (0x0024c000) libpthread.so.0 => /lib/libpthread.so.0 (0x00da8000) libdl.so.2 => /lib/libdl.so.2 (0x00cd6000) libutil.so.1 => /lib/libutil.so.1 (0x00110000) libm.so.6 => /lib/libm.so.6 (0x0085c000) libc.so.6 => /lib/libc.so.6 (0x00682000) /lib/ld-linux.so.2 (0x0012b000) Then I found another clue that might be able to solve my problem. Unfortunately libexpat is not the source of the problem. http://code.google.com/p/modwsgi/wiki/IssuesWithExpatLibrary [centos57@localhost bin]$ ldd ~/httpd/bin/httpd | grep expat libexpat.so.1 => /usr/local/lib/libexpat.so.1 (0x00b00000) [centos57@localhost bin]$ strings /usr/local/lib/libexpat.so.1 | grep expat libexpat.so.1 expat_2.0.1 [centos57@localhost bin]$ python Python 2.7.2 (default, Nov 26 2011, 08:08:44) [GCC 4.1.2 20080704 (Red Hat 4.1.2-51)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pyexpat >>> pyexpat.version_info (2, 0, 0) >>> I've been pulling my hair out trying to figure out what I'm missing in my setup. Why the problem only occurs with CentOS? Here is the detailed setup: Apache 2.2.19 Python 2.7.2 mod_wsgi-3.3 /home/httpd/conf/extra/pyramid.wsgi from pyramid.paster import get_app application = get_app('/home/homecamera/hcadmin/root/production.ini', 'main') /home/httpd/conf/extra/modwsgi.conf LoadModule wsgi_module modules/mod_wsgi.so WSGIScriptAlias /myapp /home/root/test.wsgi <Directory /home/root> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> # Use only 1 Python sub-interpreter. Multiple sub-interpreters # play badly with C extensions. WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On WSGIDaemonProcess pyramid user=daemon group=daemon processes=1 \ threads=4 \ python-path=/home/python/lib/python2.7/site-packages WSGIScriptAlias /hello /home/httpd/conf/extra/pyramid.wsgi <Directory /home/httpd/conf/extra> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> Again this same setup works on OSX and Arch Linux but not on CentOS 5.7. Could someone out there point me to the right direction before I ran out of my hair. ==================================================================================== When apache started with gdb, I got a couple of warnings Reading symbols from /home/httpd/bin/httpd...done. Attaching to program: /home/httpd/bin/httpd, process 1821 warning: .dynamic section for "/lib/libcrypt.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libutil.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations gdb output. After hitting refresh button, to load pyramid. (gdb) cont Continuing. warning: .dynamic section for "/usr/lib/libgssapi_krb5.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/usr/lib/libkrb5.so.3" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libresolv.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x8edbb90 (LWP 1824)] 0x0814c120 in EVP_PKEY_CTX_dup () apache_error_log [info] mod_wsgi (pid=1821): Starting process 'pyramid' with threads=1. [info] mod_wsgi (pid=1821): Initializing Python. [info] mod_wsgi (pid=1821): Attach interpreter ''. [info] mod_wsgi (pid=1821): Create interpreter 'web.domain.com:20000|/hcadmin'. [info] [client 10.211.55.2] mod_wsgi (pid=1821, process='pyramid', application='web.domain.com:20000|/hcadmin'): Loading WSGI script '/home/httpd/conf/extra/pyramid.wsgi'. [error] hello 1

    Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >