Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 255/286 | < Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >

  • VirtualBox Issue: virtualbox changed my Computer Name's ip address in Windows

    - by suud
    I had installed virtualbox 4.2.2 in Windows 7. My Computer Name is: MY-PC My IP address (using ipconfig /all command) is: 192.168.1.101 My IP is dynamic and I set DNS to google dns (8.8.8.8) When I ping MY-PC, I got this result: Pinging MY-PC [192.168.56.1] with 32 bytes of data: Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 My virtualbox was not running and I expected the ip adress of MY-PC is 192.168.1.101, not 192.168.56.1 Then I run command: nbtstat -a MY-PC and I got this result: VirtualBox Host-Only Network: Node IpAddress: [192.168.56.1] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 08-00-27-00-60-B3 Local Area Connection: Node IpAddress: [0.0.0.0] Scope Id: [] Host not found. Wireless Network Connection: Node IpAddress: [192.168.1.101] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 94-0C-6D-E5-6D-5D So it seems virtualbox caused this problem. I want to know how to change back my Computer Name's ip address to 192.168.1.101 (or any ip address that set by my internet connection)?

    Read the article

  • Getting SMB file shares working over a PPTP VPN

    - by Ben Scott
    I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to the NIC's IP (192.168...), and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else. EDIT: The PC I'm having the issue on is running Win 7 Home Premium. After more testing I actually have two other PCs that work, one W7HP, one XP Home, and another Vista PC that doesn't work (not tested as much as the others), all four on the same internet connection (behind the same router). All of them were tested with a straight-forward, all defaults, new VPN configuration.

    Read the article

  • Group policy waited for the network subsystem

    - by the-wabbit
    In an AD domain with Windows Server 2008 R2 DCs users are complaining about delays in the bootup process of the clients. The group policy log reveals that the client is waiting ~ 20-50 seconds for "the network subsystem": Event 5322, GroupPolicy Group policy waited for 29687 milliseconds for the network subsystem at computer boot. This appears to be domain-specific as machines joining a different domain from the same network do not experience any delays and Event 5322 reports <1000 ms wait times at startup. It happens on virtual and physical machines alike, so it does not look like a hardware- or driver-related issue. Further investigation has shown that the client is taking its time before issuing DHCP requests. In the network traces, I can see IPv6 router solicitations and multicast DNS name registrations as soon as the network driver is loaded and the network connection is reported "up" in the event log (e1cexpress/36). Yet, the DHCPv4 client service seems to take another 15-50 seconds to start (Dhcp-Client/50036), so the IPv4 address remains unconfigured for a while. The DHCP client's messages in the event log are succeeding the service start of the "Sophos Anti-Virus" service (Sophos AV 10.3 package), which I suspect to be the culprit - the DHCP client service dependencies include the TDI Support driver which might be what Sophos is using to intercept network traffic: Network Location Awareness seems to break at startup as a side-effect, I see that off-site DCs are contacted due to what seems like a race condition between the GP client and the DHCP client / NLA service startup. I could set the Group Policy Client service to depend on NLA, yet this still would not eliminate the delay. Also, I am not all that sure that this is a good idea. Is there a known resolution which would eliminate the startup delay?

    Read the article

  • Subversion Apache Ubuntu - Remote Access?

    - by Hollowsteps
    Okay, a couple days ago I built a bare bones kit into a machine. I've been running through tutorials to get it to work and right now I've gotten as far as making it available in my lan, hooray! However, I cannot access the repositories remotely. Any machine on the lan can easily access it through the hostname or, using 'outbound ip/hostname' or 'outbound ip/machine ip'. The machine can be pinged from a remote, non-lan machine and responds. I just can't get anyone into it outside of my lan. I've been trying to figure it out but I'm lost. I'm breaking a few rules and if any of these would be my problem, please indicate. I don't think I have a static IP (However I check my outbound IP whenever I do testing, is that not enough? It has stayed the same for 5+ days) I have not discussed this set-up with my service provider (Does Optimum Online block port 80? If so, can I just switch apache to listen on a different port?) I am in the DMZ of my router. This is what allowed it to be pinged remotely. For security reasons the machine that is in that zone is turned off most of the time until I can get it locked down. Any help would be appreciated, even if it's just a couple of words I could google to understand what I'm doing wrong. Tortoise SVN does not allow access remotely, but it does within the LAN as well.

    Read the article

  • ntpdate -d Server dropped Strata too high

    - by AndyM
    I cannot sync with a NTP source thats coming from an internal router/firewall. Anyone help ? ntppdate -d 192.168.92.82 6 Jun 11:57:30 ntpdate[5011]: ntpdate [email protected] Tue Feb 24 06:32:26 EST 2004 (1) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) receive(192.168.92.82) transmit(192.168.92.82) 192.168.92.82: Server dropped: strata too high server 192.168.92.82, port 123 stratum 16, precision -19, leap 11, trust 000 refid [73.78.73.84], delay 0.02591, dispersion 0.00002 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 6:28:16.000 originate timestamp: d1972e03.0ae02645 Mon, Jun 6 2011 11:44:19.042 transmit timestamp: d197311b.0ffac1d2 Mon, Jun 6 2011 11:57:31.062 filter delay: 0.02609 0.02591 0.02594 0.02596 0.00000 0.00000 0.00000 0.00000 filter offset: -792.020 -792.020 -792.020 -792.020 0.000000 0.000000 0.000000 0.000000 delay 0.02591, dispersion 0.00002 offset -792.020152 6 Jun 11:57:31 ntpdate[5011]: no server suitable for synchronization found Edit The server I'm being asked to sync to is a firewall , and I've now been told that it is not syncing with anything. So I suppose I need to know if I can force my server to sync with a server that is stratum 16 i.e not sync'd. Is that possible ?

    Read the article

  • KVM recommendations

    - by alex
    I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

    Read the article

  • iptables -P FORWARD DROP makes port forwarding slow

    - by Isaac
    I have three computers, linked like this: box1 (ubuntu) box2 router & gateway (debian) box3 (opensuse) [10.0.1.1] ---- [10.0.1.18,10.0.2.18,10.0.3.18] ---- [10.0.3.15] | box4, www [10.0.2.1] Among other things I want box2 to do nat and port forwarding, so that I can do ssh -p 2223 box2 to reach box3. For this I have the following iptables script: #!/bin/bash # flush iptables -F INPUT iptables -F FORWARD iptables -F OUTPUT iptables -t nat -F PREROUTING iptables -t nat -F POSTROUTING iptables -t nat -F OUTPUT # default default_action=DROP for chain in INPUT OUTPUT;do iptables -P $chain $default_action done iptables -P FORWARD DROP # allow ssh to local computer allowed_ssh_clients="10.0.1.1 10.0.3.15" for ip in $allowed_ssh_clients;do iptables -A OUTPUT -p tcp --sport 22 -d $ip -j ACCEPT iptables -A INPUT -p tcp --dport 22 -s $ip -j ACCEPT done # allow DNS iptables -A OUTPUT -p udp --dport 53 -m state \ --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p udp --sport 53 -m state \ --state ESTABLISHED,RELATED -j ACCEPT # allow HTTP & HTTPS iptables -A OUTPUT -p tcp -m multiport --dports 80,443 -j ACCEPT iptables -A INPUT -p tcp -m multiport --sports 80,443 -j ACCEPT # # ROUTING # # allow routing echo 1 >/proc/sys/net/ipv4/ip_forward # nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # http iptables -A FORWARD -p tcp --dport 80 -j ACCEPT iptables -A FORWARD -p tcp --sport 80 -j ACCEPT # ssh redirect iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 2223 -j DNAT \ --to-destination 10.0.3.15:22 iptables -A FORWARD -p tcp --sport 22 -j ACCEPT iptables -A FORWARD -p tcp --dport 22 -j ACCEPT iptables -A FORWARD -p tcp --sport 1024:65535 -j ACCEPT iptables -A FORWARD -p tcp --dport 1024:65535 -j ACCEPT iptables -I FORWARD -j LOG --log-prefix "iptables denied: " While this works, it takes about 10 seconds to get a password promt from my ssh command. Afterwards, the connection is as responsive as could be. If I change the default policy for my FORWARD chain to "ACCEPT", then the password promt is there imediatly. I have tried analysing the logs, but I can not spot a difference in the logs for ACCEPT/DROP in my FORWARD chain. Also I have tried allowing all the unprivileged ports, as box1 uses thoses for doing ssh to box2. Any hints? (If the whole setup seems strange to you - the point of the exercise is to understand iptables ;))

    Read the article

  • scp error: "Permission denied (publickey). lost connection"

    - by Winston C. Yang
    I tried to scp an svn dump to savannah, but I got the following error at the end. Permission denied (publickey). lost connection The scp command and verbose output are below. Any ideas? [wcyang@be2-wireless-pittnet-60-37 ~]$ scp -v diffcolor-dump.bz2 [email protected]:/srv/download/diffcolor/ Executing: program /usr/bin/ssh host dl.sv.gnu.org, user wcyang, command scp -v -t /srv/download/diffcolor/ OpenSSH_5.2p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to dl.sv.gnu.org [140.186.70.73] port 22. debug1: Connection established. debug1: identity file /Users/wcyang/.ssh/identity type -1 debug1: identity file /Users/wcyang/.ssh/id_rsa type 1 debug1: identity file /Users/wcyang/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'dl.sv.gnu.org' is known and matches the RSA host key. debug1: Found key in /Users/wcyang/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/wcyang/.ssh/identity debug1: Offering public key: /Users/wcyang/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/wcyang/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). lost connection

    Read the article

  • Static IP for dynamic IP

    - by scape279
    I have a dynamic IP address. I would like to have a static IP, but Virgin Media don't allow static IPs for residential broadband services, even if you ask them really nicely and offer to pay for it without switching to a business tariff. I am already registered with a dynamic DNS service which is updated by my router eg me.example.com will always resolve to my dynamic IP. This is fine for some circumstances, but not if you can only enter an IP address into configuration files/hardware etc like firewalls, subversion services etc etc. Is there a way I can have a static IP address 'forwarding' to my dynamic IP? Would a possible solution involve tunnelling? Setting up a private proxy? Please note the following: I am able to buy an IP address from my web host. I have access to a webserver and I am able to create custom DNS zones. I'm happy to have a webserver running at home if necessary also. I do not wish to change broadband providers. I have zero control over the services that require the IP address entering so I cannot tackle the problem that way round (services I need to access are at work). PS I've tried googling this issue, but it is very difficult to search for as most results are related to dynamic dns (which I already have set up and isnt quite what I'm after)

    Read the article

  • Route specific HTTP requests through pfSense OpenVPN

    - by DennisQ
    Hi, to start, I have very little knowledge on routes, iptables, etc. That said, here's what I'm trying to accomplish and where I think I'm stumped: Problem: We have an external website which we recently firewalled so it only accepts traffic from our office IP addresses. This works well at the office, but doesn't work for remote access through VPN as we don't route all traffic through OpenVPN. I would rather avoid forcing everyone to route all traffic through just to accommodate this one site. Environment: Main router box is running pfSense. Em0 is internal IP, Em1 is external. Internal net is 10.23.x and VPN is 10.0.8.0/24 I believe what I need to do is add a route to the VPN server config to send all traffic to that IP over the VPN tunnel. I think that part's working, but I don't get a response back, so I'm assuming that I need some NAT config on the VPN server to route the response back over the tunnel? What I've found so far is to try the following, but since this is a pfSense box on FreeBSD, I can't run iptables, etc. Make sure ip forwarding is enabled: echo 1 /proc/sys/net/ipv4/ip_forward Setup NAT back out: iptables -t nat -A POSTROUTING -s 10.0.8.0/24 -o em0 -j MASQUERADE Am I on the right path, and if so how do I accomplish this through pfSense UI or FreeBSD CLI? Thanks!

    Read the article

  • apache vhost not working consistently

    - by petrus
    I have a vhost on my webserver whose sole and unique goal is to return the client IP adress: petrus@bzn:~$ cat /home/vhosts/domain.org/index.php <?php echo $_SERVER['REMOTE_ADDR']; echo "\n" ?> This helps me troubleshoot networking issues, especially when NAT is involved. As such, I don't always have domain name resolution and this service needs to work even if queried by its IP address. I'm using it this way: petrus@hive:~$ echo "GET /" | nc 88.191.124.41 80 191.51.4.55 petrus@hive:~$ echo "GET /" | nc domain.org 80 191.51.4.55 router#more http://88.191.124.41/index.php 88.191.124.254 However I found that it wasn't working from at least a computer: petrus@seth:~$ echo "GET /" | nc domain.org 80 petrus@seth:~$ petrus@seth:~$ echo "GET /" | nc 88.191.124.41 80 petrus@seth:~$ What I checked: This is not related to ipv6: petrus@seth:~$ echo "GET /" | nc -4 ydct.org 80 petrus@seth:~$ petrus@hive:~$ echo "GET /" | nc ydct.org 80 2a01:e35:ee8c:180:21c:77ff:fe30:9e36 netcat version is the same (except platform, i386 vs x64): petrus@seth:~$ type nc nc est haché (/bin/nc) petrus@seth:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@seth:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2010-06-26 14:01 /etc/alternatives/nc -> /bin/nc.openbsd petrus@hive:~$ type nc nc est haché (/bin/nc) petrus@hive:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@hive:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2011-05-26 01:23 /etc/alternatives/nc -> /bin/nc.openbsd It works when used without the pipe: petrus@seth:~$ nc domain.org 80 GET / 2a01:e35:ee8c:180:221:85ff:fe96:e485 And the piping works at least with a test service (netcat listening on 1234/tcp and output to stdout) petrus@bzn:~$ nc -l -p 1234 GET / petrus@bzn:~$ petrus@seth:~$ echo "GET /" | nc domain.org 1234 petrus@seth:~$ I don't know if this issue is more related to netcat or Apache, but I'd appreciate any pointers to troubleshoot this issue ! The IP addresses have been modified but kept consistent for easy reading. bzn is the server, hive is a working client and seth is the client on which I have the issue.

    Read the article

  • Is it possible to play multiple audio streams from one "jukebox" to multiple Airport Express devices?

    - by Alex Reynolds
    I have set up a Mac mini as a jukebox that streams audio to an Airport Express in another room in the house, using the AirPlay/AirTunes feature in iTunes. I control this with the iOS Remote app, and this works great. At the present time, it looks like the Mac mini's copy of iTunes gets taken over by the Remote app, while streaming. If I set up a second Airport Express in room B, is there a way to set it up (as well as the jukebox) so that it can receive and play its own unique music stream ("stream B"), separate from what's going on at the Mac mini, or in room A, which is playing stream A? To accomplish this, I would be happy to buy a copy of Rogue Amoeba's AirFoil if it will allow sending multiple, separate audio streams from one computer to the multiple wireless bridges, while using the Remote app (or a Rogue Amoeba equivalent for iOS). However, it is unclear to me from their site documentation, whether that is possible or not. I'd prefer to give the points to an answer that solves this problem. If you don't know if it can be done, or do not think it can be done, please allow others to answer. I appreciate your help. Thanks for your advice.

    Read the article

  • Sonicwall routing between multiple subnets on multiple interfaces

    - by Rain
    As shown by the network diagram below, I have two completely separate networks. One is being managed by a Sonicwall NSA 220, the other by some other router (the brand is not important). My goal is to allow devices within the 192.168.2.0/24 network to access devices in the 192.168.3.0/24 network. Allowing the reverse (192.168.3.0/24 - 192.168.2.0/24) is not required. So far, I have done the following: I connected the X3 Interface on the Sonicwall to the 192.168.3.0/24 network switch (shown as the dashed red line in the diagram). Next, I gave it a static ip address of 192.168.3.254 and set the Zone to LAN (the same Zone for the X0 interface). Judging by various articles and KBs I've read, this is all that should be necessary, although it does not work. I can ping 192.168.3.254 from any device in the 192.168.2.0/24 network although I cannot ping/connect to any device within the 192.168.3.0/24 network. Any help would be greatly appreciated! Network Diagram: (I asked a similar, yet more complicated, question earlier; although, I realized that I cannot solve that without first solving this (which may actually solve my original question))

    Read the article

  • Ingress filtering in Linux traffic control: Redirect traffic to IFB device

    - by Dani Camps
    I have an openwrt router and I want to shape incoming traffic in order to classify all the traffic addressed to a certain IP address in my home network as low priority. For that purpose I want to redirect all traffic incoming to the eth1 interface, the one connected to the DSL modem, to an IFB device where I will do the shaping. These are the details of my system: Linux OpenWrt 2.6.32.27 #7 Fri Jul 15 02:43:34 CEST 2011 mips GNU/Linux Here is the script I am using where the last instruction is failing: # Variable definition ETH=eth1 IFB=ifb1 IP_LP="192.168.1.22/32" DL_RATE="900kbps" HP_RATE="890kbps" LP_RATE="10kbps" TC="tc" # Configuring the ifbX interface insmod ifb insmod sch_htb insmod sch_ingress ifconfig $IFB up # Adding the HTB scheduler to the ingress interface $TC qdisc add dev $IFB root handle 1: htb default 11 # Set the maximum bandwidth that each priority class can get, and the maximum borrowing they can do $TC class add dev $IFB parent 1:1 classid 1:10 htb rate $LP_RATE ceil $DL_RATE $TC class add dev $IFB parent 1:1 classid 1:11 htb rate $HP_RATE ceil $DL_RATE # Redirect all ingress traffic arriving at $ETH to $IFB $TC qdisc del dev $ETH ingress 2>/dev/null $TC qdisc add dev $ETH ingress $TC filter add dev $ETH parent ffff: protocol ip prio 1 u32 \ match u32 0 0 flowid 1:1 \ action mirred egress redirect dev $IFB The last instruction fails with: Action 4 device ifb1 ifindex 9 RTNETLINK answers: No such file or directory We have an error talking to the kernel Does anyone know what am I doing wrong ? Best Regards Daniel

    Read the article

  • Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

    - by BlueBill
    Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

    Read the article

  • ubuntu 9.04 pptp broken after a power failure

    - by kevin42
    I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

    Read the article

  • My computer loses network connectivity every 30 minutes

    - by Logan Garland
    My LAN connected PC loses network connectivity every 30 minutes. It has a static IP address and I've checked to make sure there aren't any IP conflicts on my network. If I'm streaming from that PC to my Xbox the stream will be interrupted and it normally takes about a minute to come back online. The same happens if I'm actually on the PC and just browsing the web. I'm looking for suggestions on how to track down this issue. I've tried checking the available logs on my router to see if there is an issue with DCHP but have been unsuccessful in finding any evidence. Any suggestions would be helpful. I can't think of any recent changes to my network, PC or software installations that may have caused this. I am a software developer and have intermediate networking knowledge. EDIT: During one outage I told windows to troubleshoot the network problem and it said that it could automatically fix the problem by changing DCHP info. It basically said my network adapter from static to automatically obtain. This did fix the issue quicker than just waiting it out, but the outage occurred again 30 minutes later even when leaving those settings.

    Read the article

  • How to get decent WiFi despite a virtual Faraday cage

    - by MT_Head
    One of my clients is the local branch of an international airline. They have a small office in the secured area behind the ticket counters, and timeshare space at the ticket counter. I need to add a ticket printer out front, which I cannot (for contract/liability reasons) attach to the shared computer at the counter; the only workable solution seems to be to put the printer and its attached computer on a cart and connect to the office's network via WiFi. So far, no problem - right? Well, the terminal has been getting a facelift, which - among other things - includes decorative stainless-steel panels along the wall behind the ticket counters. This paneling acts as a seriously effective barrier to WiFi! The office's WiFi router - a brand-new D-Link DIR-815, dual-band 802.11n - is just on the other side of the pictured wall, and twenty feet or so to the right. And yet the only way I can connect AT ALL on this side of the wall is to stick the USB adapter (on the end of an extension cable) right into the crack between panels... and even then I can only see the 5GHz network, and that very weakly. Has anyone else had experience with this sort of misguided interior decoration? Any ideas on how I can improve reception on the other side of the barrier? (Needless to say, physical modifications of the environment - tempting though they might be - are strictly no-go.)

    Read the article

  • Hardware for a home server running Windows Server 2008 R2 Hyper-V or Microsoft Hyper-V Server 2008 R2

    - by David Hayes
    Hi, I'm planning to build a server to do the following Act as a file server (videos, pictures music) Run Squeezebox server Run Zune Software to allow wireless syncing to Windows Phone 7 I'd also like to aim for Low power usage (i'd settle for less than the 90-100Watts I'm using atm Flexibility, I might want to add a web server or sharepoint or... Something I can learn/test on, work is mainly a Windows shop but I do have Linux experience too I'd like to take a look at App-V (application virtualization) too I'd like it to cost less than $1000 Quiet would be nice but not essential (it'll be in the basement) I'm thinking of getting a technet subscription to get access to Windows Server 2008 R2 at a reasonable price ($199) So my plan was this Get a bunch of 2TB Caviar green drives to RAID up (RAID 1 or 6 probably) Get a Quad core CPU (Intel i5/i7 probably) Install a Hypervisor Install w2k8 R2 Storage Server for a NAS Install Windows 7 Pro to run Zune/Squeeze box Install any other machines I want to play with Questions Can anyone see any issues with this or have any better ideas? Do you think I'd need an i7 over an i5? Is 4 cores enough/too much? Can anyone sugest a nice, reasonably priced case that will hold 6-8 drives and stay cool Should I wait for Sandy Bridge parts?

    Read the article

  • DNAT to 127.0.0.1 with iptables / Destination access control for transparent SOCKS proxy

    - by cdauth
    I have a server running on my local network that acts as a router for the computers in my network. I want to achieve now that outgoing TCP requests to certain IP addresses are tunnelled through an SSH connection, without giving the people from my network the possibility to use that SSH tunnel to connect to arbitrary hosts. The approach I had in mind until now was to have an instance of redsocks listening on localhost and to redirect all outgoing requests to the IP addresses I want to divert to that redsocks instance. I added the following iptables rule: iptables -t nat -A PREROUTING -p tcp -d 1.2.3.4 -j DNAT --to-destination 127.0.0.1:12345 Apparently, the Linux kernel considers packets coming from a non-127.0.0.0/8 address to an 127.0.0.0/8 address as “Martian packets” and drops them. What worked, though, was to have redsocks listen on eth0 instead of lo and then have iptables DNAT the packets to the eth0 address instead (or using a REDIRECT rule). The problem about this is that then every computer on my network can use the redsocks instance to connect to every host on the internet, but I want to limit its usage to a certain set of IP addresses only. Is there any way to make iptables DNAT packets to 127.0.0.1? Otherwise, does anyone have an idea how I could achieve my goal without opening up the tunnel to everyone? Update: I have also tried to change the source of the packets, without any success: iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 1.2.3.4 -j SNAT --to-source 127.0.0.1 iptables -t nat -A POSTROUTING -p tcp -s 192.168.1.0/24 -d 127.0.0.1 -j SNAT --to-source 127.0.0.1

    Read the article

  • Windows Server 2008 DHCP with RRAS

    - by Guillermo Prandi
    I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP service in this server (ports 9730 and 9731). Since clients have dynamic IP addresses I cannot know in advance, I thought it would be nice to have them connected through a VPN in order to access the insecure service, but ONLY to access that service, like this: Client ------> VPN TUNNEL ------> (Insecure service at Server) | \----> (Normal internet access) I'd enable the insecure ports in the firewall only from VPN accesses. For this I configured RRAS in the server and gave it a static IP address range (172.19.1.2 through 172.19.1.254) to serve the clients. First I thought I could use DHCP to assign the addresses, but I cannot use DHCP in my LAN connection (not allowed by the hosting service). I tried configuring DHCP binding it to a Microsoft Loopback Adapter, but that's not supported as a DHCP source by RRAS. What I want to accomplish is to send specific DHCP options to the client (network mask, routing table, etc.). In particular: Prevent the client from having the server as default router (without changing the client's "use default gateway in remote network"). Have it as a route for the server's internal RRAS address only (172.19.1.1). Prevent the client from using a 255.255.0.0 mask for the 172.19.x.x network (a 255.255.255.0 mask would be better). Can I do that with RRAS only? How? Currently, the only solution I can think of is to use DHCP in the LAN adapter, but filter DHCP packets so they don't reach the provider's network. However, I'm not sure if that will work. Any suggestions are welcomed! Guille

    Read the article

  • Can a wifi AP act as a client, and a server at the same time?

    - by nbolton
    I feel this is SF worthy (as opposed to SU) as I go into a bit of detail on gateways/routing. Here's my ideal setup (if possible) -- there is a wifi network (lets call it bob's) with which I want access to, but I have a few other computers on my network which I want to keep behind a firewall. So I was thinking of buying a wireless access point so that I could set it up to connect to bob's network from the AP, and then from my server, connect to the AP via ethernet. So that's the first bit. Second part is that I want to have my own private wifi network off the back of this; can I then tell the AP to serve a new network called foobar. When I say private network, I mean that my server is actually a Debian linux install with routing configured (and I also do some QoS stuff on, etc). So ideally, I'd like all the clients on the private network to be behind the server in terms of routing. However, if the private clients connect to the server via wifi, then aren't they exposed to the "public" network? That is, if someone is savvy enough to scan for my IP range. Also, to do routing I'd need to connect two ethernet cables between the server and the AP (because you can't do routing/QoS on virtual devices) -- which isn't a problem really; but I'm not sure whether the AP will allow me to separate the public and private LANs. Or, as well as the AP, am I better getting a wifi-to-ethernet adapter for the server? I could use a wifi usb, but this can be tricky to set up on headless linux; plus the signal strength is a bit lousy. If this question is a bit vague/spurious in places, please comment and I will explain in more detail.

    Read the article

  • Virtual Machines Renaming/Backing up/Sharing

    - by evan
    I've started using VMware virtual machines for all of my software development projects and have a few questions for others doing the same thing. First, how can you rename the virtual machine and the name of the virtual hard drive? I have a base development machine that I clone for different projects. I'd like to name the machine and it's hard drive according the the project (right now when I copy them via cut and paste, the file names remain the same and I can only organize them by putting them in a specific directory). Second, what is the best way to back up a virtual machine? Is it possible (by breaking the virtual hard drive up into chunks instead of one big file) to get incremental backups working? It seems time machine always tries to make a copy of the whole thing which is time consuming because each virtual machine is around 30GB. Finally, how slow would it be to have a virtual machine shared on an NFS mount on a wireless N network and used from multiple computers (but with only one person using it at a time.) Would it be more reasonable on a gigabit lan connection? Thanks for your input! And please feel free to share any advice or wisdom about using virtual machines for software development and the best ways to speed them up!

    Read the article

  • Is there a way to tell what the download speed is from a site/server

    - by Memor-X
    i'm looking into which ISP i should go with at the place i'm moving into, one ISP which i have been told good things about has data limits (which when breached will drop your speed to dial-up speed) but multiple memberships which, apart from the cheapest membership, have the same data limits (the cheapest has a 10GB data limit) in their fine print, they say that each different membership has different port speeds, one particular part jumps out at me These speeds are the NBN (National Broadband Network) port speed and not the actual Internet data speed which will vary based on numerous factors including destination you are reaching, your network equipment, network congestion etc. i plan to use the net to download DLC and patch updates for games (particular the insanely large update for the Wii U) and games from Steam (if i find any good one other than this one JRPG) and downloading development resources from free sites like Deposit Files and Mediafire since one membership with a 1000GB data limit is $145 with the port speed being 12Mbps/1Mbps (cheapest) while another with the same limit is $190 with the port speed of 100Mbps/40Mbps (expensive) i am wondering how i can tell what the speed coming from site is since i don't want to be wasting money on speed that makes no difference (unlike memory which i rather have to spare) NOTE: the speeds are for a fiber optic network which where my new place is can only connect via fixed wireless which i may not be able to get with this ISP but if i can get this network then good NOTE 2: most of the resources i get from Deposit Files are always about 200 MB or less, if a resource pack is greater then it's split into multiple archives (like .7z.part) while Mediafire i have to see one bigger than 150MB NOTE 3: one update patch for a PS3 game is close to 4 GB (Disgaea 4) which i need to get access to the DLC and on the weekend i downloaded 5 GB for the Final Fantasy XIV Open Beta for the PS3 which took almost 5 hours

    Read the article

  • Windows 7 BSOD with Service Exception Error and Randomly Reboots

    - by Jason Shultz
    I've got a windows 7 laptop that BSOD with a Service Exception Error when I connect to a wireless network. It also does it when it's just sitting still doing nothing. I ran bluescreenview and here are the last four BSOD's from today: ================================================== Dump File : 051210-18642-01.dmp Crash Time : 5/12/2010 8:36:14 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06fda160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-18642-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-16551-01.dmp Crash Time : 5/12/2010 8:41:04 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06f40160 Parameter 4 : 00000000`00000000 Caused By Driver : ntoskrnl.exe Caused By Address : ntoskrnl.exe+70600 File Description : NT Kernel & System Product Name : Microsoft® Windows® Operating System Company : Microsoft Corporation File Version : 6.1.7600.16539 (win7_gdr.100226-1909) Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-16551-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-17269-01.dmp Crash Time : 5/12/2010 8:45:51 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`07db1160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-17269-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-19453-01.dmp Crash Time : 5/12/2010 5:46:25 PM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`02625160 Parameter 4 : 00000000`00000000 Caused By Driver : win32k.sys Caused By Address : win32k.sys+2d4201 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-19453-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ==================================================  

    Read the article

< Previous Page | 251 252 253 254 255 256 257 258 259 260 261 262  | Next Page >