Search Results

Search found 9403 results on 377 pages for 'high tech'.

Page 256/377 | < Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >

• Installing drivers for switchable graphics

  - by Anonymous

  I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

  Read the article

• 404 Error - HEAD request on default page

  - by Matt

  I am working on a project where we are about to go to internal release. So we are working to clean up the small problems before then. I was looking at our logs and noticed a high number of 404 errors. On further inspection it seems that all of them are related to HEAD requests. I haven't been able to find any substantive information about the preferred method for handling this in a standards compliant manner. Is there anything out there that can point out the proper way to handle that.

  Read the article

• 2D colliding n-body simulation (fast Collision Detection for large number of balls)

  - by osgx

  Hello I want to write a program for simulating a motion of high number (N = 1000 - 10^5 and more) of bodies (circles) on 2D plane. All bodies have equal size and the only force between them is elastic collision. I want to get something like but in larger scale, with more balls and more dense filling of the plane (not a gas model as here, but smth like boiling water model). So I want a fast method of detection that ball number i does have any other ball on its path within 2*radius+V*delta_t distance. I don't want to do a full search of collision with N balls for each of i ball. (This search will be N^2.) PS Sorry for loop-animated GIF. Just press Esc to stop it. (Will not work in Chrome).

  Read the article

• Recommended Reading for iPhone Core Animation

  - by morgman

  Can anyone here recommend any good books for getting my head around Core animation? I've been through the Apple docs and while I'm sure it's all there, I haven't been able to grok Core Animation yet... Is there an a good example I've missed? or some starting document I've overlooked? If not are there any good books out there on Core Animation... the few hits I've gotten while looking on Amazon don't rate anything too high, mostly MacOSX little iphone. Thanks in advance for any suggestions

  Read the article

• Algorithm to generate numerical concept hierarchy

  - by Christophe Herreman

  I have a couple of numerical datasets that I need to create a concept hierarchy for. For now, I have been doing this manually by observing the data (and a corresponding linechart). Based on my intuition, I created some acceptable hierarchies. This seems like a task that can be automated. Does anyone know if there is an algorithm to generate a concept hierarchy for numerical data? To give an example, I have the following dataset: Bangladesh 521 Brazil 8295 Burma 446 China 3259 Congo 2952 Egypt 2162 Ethiopia 333 France 46037 Germany 44729 India 1017 Indonesia 2239 Iran 4600 Italy 38996 Japan 38457 Mexico 10200 Nigeria 1401 Pakistan 1022 Philippines 1845 Russia 11807 South Africa 5685 Thailand 4116 Turkey 10479 UK 43734 US 47440 Vietnam 1042 for which I created the following hierarchy: LOWEST ( < 1000) LOW (1000 - 2500) MEDIUM (2501 - 7500) HIGH (7501 - 30000) HIGHEST ( 30000)

  Read the article

• Laptop LCD sometimes stops working on reboot. Please help.

  - by J Ringle

  I have a Gateway P-6831FX Laptop with Vista Ultimate. The Laptop LCD will sometimes not come on after I reboot the computer. I don't even close the lid and it happens. It isn't dim, it doesn't come on at all. No posting of CMOS (BIOS), nothing. Please note... this happens sometimes, not every time. Frustrating! When plugged into an external monitor, which works fine, Vista display properties can't even "sense" the laptop LCD. I try to enable the laptop LCD for dual display, turning on the laptop LCD, and it does nothing. It's like the laptop LCD is not even there. Manually taking a magnet in my hand to the laptop lid sensing switch (the sensor that turns off display/sleep mode when you close lid), sometimes causes the LCD backlight to "turn on" but not display any images. By "turn on" I mean I can see the screen backlight turn on to a 'dark gray' screen instead of pitch black. Subsequent reboot the laptop display is not working again! Here are the facts: Only happens at random and only after a reboot. Waking from Sleep mode isn't a problem. Pressing F4 function key for dual display does nothing when this happens. Closing lid doesn't seem to be related. (unless it is only after reboot.) using external magnet from laptop screen sensor sometimes triggers backlight to turn on but reboot back to square one with no LCD display. an external display always works fine. I have taken apart LCD, checked all wires and ribbons for loose connections or damage. I have replaced the Inverter. It doesn't seem to be heat related as I can put in sleep mode and resume fine when very hot. (external monitor works fine too). Sometimes the screen works fine as if there is not a problem at all. Even after a reboot... This is random. Any ideas out there? If it is a bad part... which one? The LCD seems to be fine. What are the odds of 2 bad inverters? The backlight is fine. The LCD wires/ribbons seem to be fine. I am at a loss. No warranty left and Gateway tech support is clueless. Thanks for any feedback that might help.

  Read the article

• What are modern and old compilers written in?

  - by ulum

  As a compiler, other than an interpreter, only needs to translate the input and not run it the performance of itself should be not that problematic as with an interpreter. Therefore, you wouldn't write an interpreter in, let's say Ruby or PHP because it would be far too slow. However, what about compilers? If you would write a compiler in a scripting language maybe even featuring rapid development you could possibly cut the source code and initial development time by halv, at least I think so. To be sure: With scripting language I mean interpreted languages having typical features that make programming faster, easier and more enjoyable for the programmer, usually at least. Examples: PHP, Ruby, Python, maybe JavaScript though that may be an odd choice for a compiler What are compilers normally written in? As I suppose you will respond with something low-level like C, C++ or even Assembler, why? Are there compilers written in scripting languages? What are the (dis)advantages of using low or high level programming languages for compiler writing?

  Read the article

• ffmpeg - How to determine if -movflags faststart is enabled? PHP

  - by IIIOXIII

  While I am able to encode an mp4 file which I can plan on my local windows machine, I am having trouble encoding files to mp4 which are readable when streaming by safari, etc. After a bit of reading, I believe my issue is that I must move the metadata from the end of the file to the beginning in order for the converted mp4 files to be streamable. To that end, I am trying to find out if the build of ffmpeg that I am currently using is able to use the -movflags faststart option through php - as my current outputted mp4 files are not working when streamed online. This is the way I am now echoing the -help, -formats, -codecs, but I am not seeing anything about -movflags faststart in any of the lists: exec($ffmpegPath." -help", $codecArr); for($ii=0;$ii<count($codecArr);$ii++){ echo $codecArr[$ii].'</br>'; } Is there a similar method of determining if -movflags fastart is available to my ffmpeg build? Any other way? Should it be listed with any of the previously suggested commands? -help/-formats? Can someone that knows it is enabled in their version of ffmpeg check to see if it is listed under -help or -formats, etc.? TIA. EDIT: COMPLETE CONSOLE OUTPUT FOR BOTH THE CONVERSION COMMAND AND -MOVFLAGS COMMAND BELOW: COMMAND: ffmpeg_new -i C:\vidtests\Wildlife.wmv -s 640x480 C:\vidtests\Wildlife.mp4 OUTPUT: ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 [asf @ 00000000002ed760] Stream #0: not enough frames to estimate rate; consider increasing probesize Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from 'C:\vidtests\Wildlife.wmv' : Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 Duration: 00:00:30.09, start: 0.000000, bitrate: 6977 kb/s Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, fltp , 192 kb/s Stream #0:1(eng): Video: vc1 (Advanced) (WVC1 / 0x31435657), yuv420p, 1280x7 20, 5942 kb/s, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 00000000002e6980] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 00000000002e6980] profile High, level 3.0 [libx264 @ 00000000002e6980] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife.mp4': Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (vc1 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libvo_aacenc) Press [q] to stop, [?] for help frame= 53 fps= 49 q=29.0 size= 0kB time=00:00:00.13 bitrate= 2.9kbits/ frame= 63 fps= 40 q=29.0 size= 0kB time=00:00:00.46 bitrate= 0.8kbits/ frame= 74 fps= 35 q=29.0 size= 0kB time=00:00:00.83 bitrate= 0.5kbits/ frame= 85 fps= 32 q=29.0 size= 0kB time=00:00:01.20 bitrate= 0.3kbits/ frame= 95 fps= 30 q=29.0 size= 0kB time=00:00:01.53 bitrate= 0.3kbits/ frame= 107 fps= 28 q=29.0 size= 0kB time=00:00:01.93 bitrate= 0.2kbits/ Queue input is backward in time [mp4 @ 00000000003ef800] Non-monotonous DTS in output stream 0:1; previous: 7616 , current: 7063; changing to 7617. This may result in incorrect timestamps in th e output file. frame= 118 fps= 28 q=29.0 size= 113kB time=00:00:02.30 bitrate= 402.6kbits/ frame= 129 fps= 26 q=29.0 size= 219kB time=00:00:02.66 bitrate= 670.7kbits/ frame= 141 fps= 26 q=29.0 size= 264kB time=00:00:03.06 bitrate= 704.2kbits/ frame= 152 fps= 25 q=29.0 size= 328kB time=00:00:03.43 bitrate= 782.2kbits/ frame= 163 fps= 25 q=29.0 size= 431kB time=00:00:03.80 bitrate= 928.1kbits/ frame= 174 fps= 24 q=29.0 size= 568kB time=00:00:04.17 bitrate=1116.3kbits/ frame= 190 fps= 25 q=29.0 size= 781kB time=00:00:04.70 bitrate=1359.9kbits/ frame= 204 fps= 25 q=29.0 size= 1006kB time=00:00:05.17 bitrate=1593.1kbits/ frame= 218 fps= 25 q=29.0 size= 1058kB time=00:00:05.63 bitrate=1536.8kbits/ frame= 229 fps= 25 q=29.0 size= 1093kB time=00:00:06.00 bitrate=1490.9kbits/ frame= 239 fps= 24 q=29.0 size= 1118kB time=00:00:06.33 bitrate=1444.4kbits/ frame= 251 fps= 24 q=29.0 size= 1150kB time=00:00:06.74 bitrate=1397.9kbits/ frame= 265 fps= 24 q=29.0 size= 1234kB time=00:00:07.20 bitrate=1402.3kbits/ frame= 278 fps= 25 q=29.0 size= 1332kB time=00:00:07.64 bitrate=1428.3kbits/ frame= 294 fps= 25 q=29.0 size= 1403kB time=00:00:08.17 bitrate=1405.7kbits/ frame= 308 fps= 25 q=29.0 size= 1547kB time=00:00:08.64 bitrate=1466.4kbits/ frame= 323 fps= 25 q=29.0 size= 1595kB time=00:00:09.14 bitrate=1429.5kbits/ frame= 337 fps= 25 q=29.0 size= 1702kB time=00:00:09.60 bitrate=1450.7kbits/ frame= 351 fps= 25 q=29.0 size= 1755kB time=00:00:10.07 bitrate=1427.1kbits/ frame= 365 fps= 25 q=29.0 size= 1820kB time=00:00:10.54 bitrate=1414.1kbits/ frame= 381 fps= 25 q=29.0 size= 1852kB time=00:00:11.07 bitrate=1369.6kbits/ frame= 396 fps= 26 q=29.0 size= 1893kB time=00:00:11.57 bitrate=1339.5kbits/ frame= 409 fps= 26 q=29.0 size= 1923kB time=00:00:12.01 bitrate=1311.8kbits/ frame= 421 fps= 25 q=29.0 size= 1967kB time=00:00:12.41 bitrate=1298.3kbits/ frame= 434 fps= 25 q=29.0 size= 1998kB time=00:00:12.84 bitrate=1274.0kbits/ frame= 445 fps= 25 q=29.0 size= 2018kB time=00:00:13.21 bitrate=1251.3kbits/ frame= 458 fps= 25 q=29.0 size= 2048kB time=00:00:13.64 bitrate=1229.5kbits/ frame= 471 fps= 25 q=29.0 size= 2067kB time=00:00:14.08 bitrate=1202.3kbits/ frame= 484 fps= 25 q=29.0 size= 2189kB time=00:00:14.51 bitrate=1235.5kbits/ frame= 497 fps= 25 q=29.0 size= 2260kB time=00:00:14.94 bitrate=1238.3kbits/ frame= 509 fps= 25 q=29.0 size= 2311kB time=00:00:15.34 bitrate=1233.3kbits/ frame= 523 fps= 25 q=29.0 size= 2429kB time=00:00:15.81 bitrate=1258.1kbits/ frame= 535 fps= 25 q=29.0 size= 2541kB time=00:00:16.21 bitrate=1283.5kbits/ frame= 548 fps= 25 q=29.0 size= 2718kB time=00:00:16.64 bitrate=1337.5kbits/ frame= 560 fps= 25 q=29.0 size= 2845kB time=00:00:17.05 bitrate=1367.1kbits/ frame= 571 fps= 25 q=29.0 size= 2965kB time=00:00:17.41 bitrate=1394.6kbits/ frame= 580 fps= 25 q=29.0 size= 3025kB time=00:00:17.71 bitrate=1398.7kbits/ frame= 588 fps= 25 q=29.0 size= 3098kB time=00:00:17.98 bitrate=1411.1kbits/ frame= 597 fps= 25 q=29.0 size= 3183kB time=00:00:18.28 bitrate=1426.1kbits/ frame= 606 fps= 24 q=29.0 size= 3279kB time=00:00:18.58 bitrate=1445.2kbits/ frame= 616 fps= 24 q=29.0 size= 3441kB time=00:00:18.91 bitrate=1489.9kbits/ frame= 626 fps= 24 q=29.0 size= 3650kB time=00:00:19.25 bitrate=1553.0kbits/ frame= 638 fps= 24 q=29.0 size= 3826kB time=00:00:19.65 bitrate=1594.7kbits/ frame= 649 fps= 24 q=29.0 size= 3950kB time=00:00:20.02 bitrate=1616.3kbits/ frame= 660 fps= 24 q=29.0 size= 4067kB time=00:00:20.38 bitrate=1634.1kbits/ frame= 669 fps= 24 q=29.0 size= 4121kB time=00:00:20.68 bitrate=1631.8kbits/ frame= 682 fps= 24 q=29.0 size= 4274kB time=00:00:21.12 bitrate=1657.9kbits/ frame= 696 fps= 24 q=29.0 size= 4446kB time=00:00:21.58 bitrate=1687.1kbits/ frame= 709 fps= 24 q=29.0 size= 4590kB time=00:00:22.02 bitrate=1707.3kbits/ frame= 719 fps= 24 q=29.0 size= 4772kB time=00:00:22.35 bitrate=1748.5kbits/ frame= 732 fps= 24 q=29.0 size= 4852kB time=00:00:22.78 bitrate=1744.3kbits/ frame= 744 fps= 24 q=29.0 size= 4973kB time=00:00:23.18 bitrate=1756.9kbits/ frame= 756 fps= 24 q=29.0 size= 5099kB time=00:00:23.59 bitrate=1770.8kbits/ frame= 768 fps= 24 q=29.0 size= 5149kB time=00:00:23.99 bitrate=1758.4kbits/ frame= 780 fps= 24 q=29.0 size= 5227kB time=00:00:24.39 bitrate=1755.7kbits/ frame= 797 fps= 24 q=29.0 size= 5377kB time=00:00:24.95 bitrate=1765.0kbits/ frame= 813 fps= 24 q=29.0 size= 5507kB time=00:00:25.49 bitrate=1769.5kbits/ frame= 828 fps= 24 q=29.0 size= 5634kB time=00:00:25.99 bitrate=1775.5kbits/ frame= 843 fps= 24 q=29.0 size= 5701kB time=00:00:26.49 bitrate=1762.9kbits/ frame= 859 fps= 24 q=29.0 size= 5830kB time=00:00:27.02 bitrate=1767.0kbits/ frame= 872 fps= 24 q=29.0 size= 5926kB time=00:00:27.46 bitrate=1767.7kbits/ frame= 888 fps= 24 q=29.0 size= 6014kB time=00:00:27.99 bitrate=1759.7kbits/ frame= 900 fps= 24 q=29.0 size= 6332kB time=00:00:28.39 bitrate=1826.9kbits/ frame= 901 fps= 24 q=-1.0 Lsize= 6717kB time=00:00:30.10 bitrate=1828.0kbits /s video:6211kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.513217% [libx264 @ 00000000002e6980] frame I:8 Avg QP:21.77 size: 39744 [libx264 @ 00000000002e6980] frame P:433 Avg QP:25.69 size: 11490 [libx264 @ 00000000002e6980] frame B:460 Avg QP:29.25 size: 2319 [libx264 @ 00000000002e6980] consecutive B-frames: 5.4% 78.6% 2.7% 13.3% [libx264 @ 00000000002e6980] mb I I16..4: 21.8% 48.8% 29.5% [libx264 @ 00000000002e6980] mb P I16..4: 0.7% 4.0% 1.3% P16..4: 37.1% 22.2 % 15.5% 0.0% 0.0% skip:19.2% [libx264 @ 00000000002e6980] mb B I16..4: 0.1% 0.5% 0.2% B16..8: 43.5% 7.0 % 2.1% direct: 2.2% skip:44.5% L0:36.4% L1:52.7% BI:10.9% [libx264 @ 00000000002e6980] 8x8 transform intra:62.8% inter:56.2% [libx264 @ 00000000002e6980] coded y,uvDC,uvAC intra: 74.2% 78.8% 44.0% inter: 2 3.6% 14.5% 1.0% [libx264 @ 00000000002e6980] i16 v,h,dc,p: 48% 24% 9% 20% [libx264 @ 00000000002e6980] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 17% 15% 7% 8% 11% 8% 10% 8% [libx264 @ 00000000002e6980] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 17% 15% 7% 10% 11% 8% 7% 7% [libx264 @ 00000000002e6980] i8c dc,h,v,p: 53% 21% 18% 7% [libx264 @ 00000000002e6980] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 00000000002e6980] ref P L0: 62.4% 19.0% 12.0% 6.6% 0.0% [libx264 @ 00000000002e6980] ref B L0: 90.5% 8.9% 0.7% [libx264 @ 00000000002e6980] ref B L1: 97.9% 2.1% [libx264 @ 00000000002e6980] kb/s:1692.37 AND THE –MOVFLAGS COMMAND: C:\XSITE\SITE>ffmpeg_new -i C:\vidtests\Wildlife.mp4 -movflags faststart C:\vidtests\Wildlife_fs.mp4 AND THE –MOVFLAGS OUTPUT ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'C:\vidtests\Wildlife.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD encoder : Lavf55.10.100 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball copyright : -¬ 2008 Microsoft Corporation Duration: 00:00:30.13, start: 0.036281, bitrate: 1826 kb/s Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x480, 1692 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 12 8 kb/s Metadata: handler_name : SoundHandler [libx264 @ 0000000004360620] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 0000000004360620] profile High, level 3.0 [libx264 @ 0000000004360620] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife_fs.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Metadata: handler_name : SoundHandler Stream mapping: Stream #0:0 -> #0:0 (h264 -> libx264) Stream #0:1 -> #0:1 (aac -> libvo_aacenc) Press [q] to stop, [?] for help frame= 52 fps=0.0 q=29.0 size= 29kB time=00:00:01.76 bitrate= 133.9kbits/ frame= 63 fps= 60 q=29.0 size= 104kB time=00:00:02.14 bitrate= 397.2kbits/ frame= 74 fps= 47 q=29.0 size= 176kB time=00:00:02.51 bitrate= 573.2kbits/ frame= 87 fps= 41 q=29.0 size= 265kB time=00:00:02.93 bitrate= 741.2kbits/ frame= 101 fps= 37 q=29.0 size= 358kB time=00:00:03.39 bitrate= 862.8kbits/ frame= 113 fps= 34 q=29.0 size= 437kB time=00:00:03.79 bitrate= 943.7kbits/ frame= 125 fps= 33 q=29.0 size= 520kB time=00:00:04.20 bitrate=1012.2kbits/ frame= 138 fps= 32 q=29.0 size= 606kB time=00:00:04.64 bitrate=1069.8kbits/ frame= 151 fps= 31 q=29.0 size= 696kB time=00:00:05.06 bitrate=1124.3kbits/ frame= 163 fps= 30 q=29.0 size= 780kB time=00:00:05.47 bitrate=1166.4kbits/ frame= 176 fps= 30 q=29.0 size= 919kB time=00:00:05.90 bitrate=1273.9kbits/ frame= 196 fps= 31 q=29.0 size= 994kB time=00:00:06.57 bitrate=1237.4kbits/ frame= 213 fps= 31 q=29.0 size= 1097kB time=00:00:07.13 bitrate=1258.8kbits/ frame= 225 fps= 30 q=29.0 size= 1204kB time=00:00:07.53 bitrate=1309.8kbits/ frame= 236 fps= 30 q=29.0 size= 1323kB time=00:00:07.91 bitrate=1369.4kbits/ frame= 249 fps= 29 q=29.0 size= 1451kB time=00:00:08.34 bitrate=1424.6kbits/ frame= 263 fps= 29 q=29.0 size= 1574kB time=00:00:08.82 bitrate=1461.3kbits/ frame= 278 fps= 29 q=29.0 size= 1610kB time=00:00:09.30 bitrate=1416.9kbits/ frame= 296 fps= 30 q=29.0 size= 1655kB time=00:00:09.91 bitrate=1368.0kbits/ frame= 313 fps= 30 q=29.0 size= 1697kB time=00:00:10.48 bitrate=1326.4kbits/ frame= 330 fps= 30 q=29.0 size= 1737kB time=00:00:11.05 bitrate=1286.5kbits/ frame= 345 fps= 30 q=29.0 size= 1776kB time=00:00:11.54 bitrate=1260.4kbits/ frame= 361 fps= 30 q=29.0 size= 1813kB time=00:00:12.07 bitrate=1230.3kbits/ frame= 377 fps= 30 q=29.0 size= 1847kB time=00:00:12.59 bitrate=1201.4kbits/ frame= 395 fps= 30 q=29.0 size= 1880kB time=00:00:13.22 bitrate=1165.0kbits/ frame= 410 fps= 30 q=29.0 size= 1993kB time=00:00:13.72 bitrate=1190.2kbits/ frame= 424 fps= 30 q=29.0 size= 2080kB time=00:00:14.18 bitrate=1201.4kbits/ frame= 439 fps= 30 q=29.0 size= 2166kB time=00:00:14.67 bitrate=1209.4kbits/ frame= 455 fps= 30 q=29.0 size= 2262kB time=00:00:15.21 bitrate=1217.5kbits/ frame= 469 fps= 30 q=29.0 size= 2341kB time=00:00:15.68 bitrate=1223.0kbits/ frame= 484 fps= 30 q=29.0 size= 2430kB time=00:00:16.19 bitrate=1229.1kbits/ frame= 500 fps= 30 q=29.0 size= 2523kB time=00:00:16.71 bitrate=1236.3kbits/ frame= 515 fps= 30 q=29.0 size= 2607kB time=00:00:17.21 bitrate=1240.4kbits/ frame= 531 fps= 30 q=29.0 size= 2681kB time=00:00:17.73 bitrate=1238.2kbits/ frame= 546 fps= 30 q=29.0 size= 2758kB time=00:00:18.24 bitrate=1238.2kbits/ frame= 561 fps= 30 q=29.0 size= 2824kB time=00:00:18.75 bitrate=1233.4kbits/ frame= 576 fps= 30 q=29.0 size= 2955kB time=00:00:19.25 bitrate=1256.8kbits/ frame= 586 fps= 29 q=29.0 size= 3061kB time=00:00:19.59 bitrate=1279.6kbits/ frame= 598 fps= 29 q=29.0 size= 3217kB time=00:00:19.99 bitrate=1318.4kbits/ frame= 610 fps= 29 q=29.0 size= 3354kB time=00:00:20.39 bitrate=1347.2kbits/ frame= 622 fps= 29 q=29.0 size= 3483kB time=00:00:20.78 bitrate=1372.6kbits/ frame= 634 fps= 29 q=29.0 size= 3593kB time=00:00:21.19 bitrate=1388.6kbits/ frame= 648 fps= 29 q=29.0 size= 3708kB time=00:00:21.66 bitrate=1402.3kbits/ frame= 661 fps= 29 q=29.0 size= 3811kB time=00:00:22.08 bitrate=1413.5kbits/ frame= 674 fps= 29 q=29.0 size= 3978kB time=00:00:22.53 bitrate=1446.3kbits/ frame= 690 fps= 29 q=29.0 size= 4133kB time=00:00:23.05 bitrate=1468.4kbits/ frame= 706 fps= 29 q=29.0 size= 4263kB time=00:00:23.58 bitrate=1480.4kbits/ frame= 721 fps= 29 q=29.0 size= 4391kB time=00:00:24.08 bitrate=1493.8kbits/ frame= 735 fps= 29 q=29.0 size= 4524kB time=00:00:24.55 bitrate=1509.4kbits/ frame= 748 fps= 29 q=29.0 size= 4661kB time=00:00:24.98 bitrate=1528.2kbits/ frame= 763 fps= 29 q=29.0 size= 4835kB time=00:00:25.50 bitrate=1553.1kbits/ frame= 778 fps= 29 q=29.0 size= 4993kB time=00:00:25.99 bitrate=1573.6kbits/ frame= 795 fps= 29 q=29.0 size= 5149kB time=00:00:26.56 bitrate=1588.1kbits/ frame= 814 fps= 29 q=29.0 size= 5258kB time=00:00:27.18 bitrate=1584.4kbits/ frame= 833 fps= 29 q=29.0 size= 5368kB time=00:00:27.82 bitrate=1580.2kbits/ frame= 851 fps= 29 q=29.0 size= 5469kB time=00:00:28.43 bitrate=1575.9kbits/ frame= 870 fps= 29 q=29.0 size= 5567kB time=00:00:29.05 bitrate=1569.5kbits/ frame= 889 fps= 29 q=29.0 size= 5688kB time=00:00:29.70 bitrate=1568.4kbits/ Starting second pass: moving header on top of the file frame= 902 fps= 28 q=-1.0 Lsize= 6109kB time=00:00:30.14 bitrate=1659.8kbits /s dup=1 drop=0 video:5602kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.566600% [libx264 @ 0000000004360620] frame I:8 Avg QP:20.52 size: 39667 [libx264 @ 0000000004360620] frame P:419 Avg QP:25.06 size: 10524 [libx264 @ 0000000004360620] frame B:475 Avg QP:29.03 size: 2123 [libx264 @ 0000000004360620] consecutive B-frames: 3.2% 79.6% 0.3% 16.9% [libx264 @ 0000000004360620] mb I I16..4: 20.7% 52.3% 26.9% [libx264 @ 0000000004360620] mb P I16..4: 0.7% 4.2% 1.1% P16..4: 39.4% 21.4 % 13.8% 0.0% 0.0% skip:19.3% [libx264 @ 0000000004360620] mb B I16..4: 0.1% 0.9% 0.3% B16..8: 41.8% 6.4 % 1.7% direct: 1.7% skip:47.1% L0:36.4% L1:53.3% BI:10.3% [libx264 @ 0000000004360620] 8x8 transform intra:65.7% inter:58.8% [libx264 @ 0000000004360620] coded y,uvDC,uvAC intra: 71.2% 76.6% 35.7% inter: 2 0.7% 13.0% 0.5% [libx264 @ 0000000004360620] i16 v,h,dc,p: 48% 24% 8% 20% [libx264 @ 0000000004360620] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 17% 18% 15% 6% 8% 11% 8% 10% 8% [libx264 @ 0000000004360620] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 16% 15% 7% 10% 11% 8% 8% 7% [libx264 @ 0000000004360620] i8c dc,h,v,p: 51% 22% 19% 9% [libx264 @ 0000000004360620] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 0000000004360620] ref P L0: 63.4% 19.7% 11.0% 5.9% 0.0% [libx264 @ 0000000004360620] ref B L0: 90.7% 8.7% 0.7% [libx264 @ 0000000004360620] ref B L1: 98.4% 1.6% [libx264 @ 0000000004360620] kb/s:1524.54

  Read the article

• Are the ASP.net __EVENTTARGET and __EVENTARGUMENT susceptible to SQL injection?

  - by Schleichermann

  A security review was done against one of our ASP.net applications and returned in the test results was a SQL Injection Exposures considered to be a high risk item. The test that was performed passed a SQL statement as the value of the __EVENTTARGET and the __EVENTARGUMENT. I am wondering since these 2 values are ASP.net auto-generated hidden fields used for the Auto-Postback feature of the framework and hold information specific to the controls initiating the postback, is there really the potential for SQL injection if you are never manually calling and or pulling values out of these parameters in your code behind?

  Read the article

• Figuring out the required MaxReceivedMessageSize in WCF with NetTcpBinding

  - by Flo

  I'm using NetTcpBinding in WCF and i want to send a Stream which does not exceed the size of 1 MB. I have set the MaxReceivedMessageSize to a really high number and that works fine of course. But I am curious: Does setting the MaxReceivedMessageSize to a very hight number have any (negative) impact or would it be useful to set it just above the size I actually want to send/receive? What kind of overhead can I expect when using the NetTcpBinding to transfer a stream? Meaning: when I send a stream of 1 MB, how large does my MaxReceivedMessageSize has to be?

  Read the article

• Boost asio async vs blocking reads, udp speed/quality

  - by Dolphin

  I have a quick and dirty proof of concept app that I wrote in C# that reads high data rate multicast UDP packets from the network. For various reasons the full implementation will be written in C++ and I am considering using boost asio. The C# version used a thread to receive the data using blocking reads. I had some problems with dropped packets if the computer was heavily loaded (generally with processing those packets in another thread). What I would like to know is if the async read operations in boost (which use overlapped io in windows) will help ensure that I receive the packets and/or reduce the cpu time needed to receive the packets. The single thread doing blocking reads is pretty straightforward, using the async reads seems like a step up in complexity, but I think it would be worth it if it provided higher performance or dropped fewer packets on a heavily loaded system. Currently the data rate should be no higher than 60Mb/s.

  Read the article

• Norton Ghost EBAB03F1: The specified network name is no longer available

  - by Breck Carter

  After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

  Read the article

• How to count each digit in a range of integers?

  - by Carlos Gutiérrez

  Imagine you sell those metallic digits used to number houses, locker doors, hotel rooms, etc. You need to find how many of each digit to ship when your customer needs to number doors/houses: 1 to 100 51 to 300 1 to 2,000 with zeros to the left The obvious solution is to do a loop from the first to the last number, convert the counter to a string with or without zeros to the left, extract each digit and use it as an index to increment an array of 10 integers. I wonder if there is a better way to solve this, without having to loop through the entire integers range. Solutions in any language or pseudocode are welcome. Edit: Answers review John at CashCommons and Wayne Conrad comment that my current approach is good and fast enough. Let me use a silly analogy: If you were given the task of counting the squares in a chess board in less than 1 minute, you could finish the task by counting the squares one by one, but a better solution is to count the sides and do a multiplication, because you later may be asked to count the tiles in a building. Alex Reisner points to a very interesting mathematical law that, unfortunately, doesn’t seem to be relevant to this problem. Andres suggests the same algorithm I’m using, but extracting digits with %10 operations instead of substrings. John at CashCommons and phord propose pre-calculating the digits required and storing them in a lookup table or, for raw speed, an array. This could be a good solution if we had an absolute, unmovable, set in stone, maximum integer value. I’ve never seen one of those. High-Performance Mark and strainer computed the needed digits for various ranges. The result for one millon seems to indicate there is a proportion, but the results for other number show different proportions. strainer found some formulas that may be used to count digit for number which are a power of ten. Robert Harvey had a very interesting experience posting the question at MathOverflow. One of the math guys wrote a solution using mathematical notation. Aaronaught developed and tested a solution using mathematics. After posting it he reviewed the formulas originated from Math Overflow and found a flaw in it (point to Stackoverflow :). noahlavine developed an algorithm and presented it in pseudocode. A new solution After reading all the answers, and doing some experiments, I found that for a range of integer from 1 to 10n-1: For digits 1 to 9, n*10(n-1) pieces are needed For digit 0, if not using leading zeros, n*10n-1 - ((10n-1) / 9) are needed For digit 0, if using leading zeros, n*10n-1 - n are needed The first formula was found by strainer (and probably by others), and I found the other two by trial and error (but they may be included in other answers). For example, if n = 6, range is 1 to 999,999: For digits 1 to 9 we need 6*105 = 600,000 of each one For digit 0, without leading zeros, we need 6*105 – (106-1)/9 = 600,000 - 111,111 = 488,889 For digit 0, with leading zeros, we need 6*105 – 6 = 599,994 These numbers can be checked using High-Performance Mark results. Using these formulas, I improved the original algorithm. It still loops from the first to the last number in the range of integers, but, if it finds a number which is a power of ten, it uses the formulas to add to the digits count the quantity for a full range of 1 to 9 or 1 to 99 or 1 to 999 etc. Here's the algorithm in pseudocode: integer First,Last //First and last number in the range integer Number //Current number in the loop integer Power //Power is the n in 10^n in the formulas integer Nines //Nines is the resut of 10^n - 1, 10^5 - 1 = 99999 integer Prefix //First digits in a number. For 14,200, prefix is 142 array 0..9 Digits //Will hold the count for all the digits FOR Number = First TO Last CALL TallyDigitsForOneNumber WITH Number,1 //Tally the count of each digit //in the number, increment by 1 //Start of optimization. Comments are for Number = 1,000 and Last = 8,000. Power = Zeros at the end of number //For 1,000, Power = 3 IF Power 0 //The number ends in 0 00 000 etc Nines = 10^Power-1 //Nines = 10^3 - 1 = 1000 - 1 = 999 IF Number+Nines <= Last //If 1,000+999 < 8,000, add a full set Digits[0-9] += Power*10^(Power-1) //Add 3*10^(3-1) = 300 to digits 0 to 9 Digits[0] -= -Power //Adjust digit 0 (leading zeros formula) Prefix = First digits of Number //For 1000, prefix is 1 CALL TallyDigitsForOneNumber WITH Prefix,Nines //Tally the count of each //digit in prefix, //increment by 999 Number += Nines //Increment the loop counter 999 cycles ENDIF ENDIF //End of optimization ENDFOR SUBROUTINE TallyDigitsForOneNumber PARAMS Number,Count REPEAT Digits [ Number % 10 ] += Count Number = Number / 10 UNTIL Number = 0 For example, for range 786 to 3,021, the counter will be incremented: By 1 from 786 to 790 (5 cycles) By 9 from 790 to 799 (1 cycle) By 1 from 799 to 800 By 99 from 800 to 899 By 1 from 899 to 900 By 99 from 900 to 999 By 1 from 999 to 1000 By 999 from 1000 to 1999 By 1 from 1999 to 2000 By 999 from 2000 to 2999 By 1 from 2999 to 3000 By 1 from 3000 to 3010 (10 cycles) By 9 from 3010 to 3019 (1 cycle) By 1 from 3019 to 3021 (2 cycles) Total: 28 cycles Without optimization: 2,235 cycles Note that this algorithm solves the problem without leading zeros. To use it with leading zeros, I used a hack: If range 700 to 1,000 with leading zeros is needed, use the algorithm for 10,700 to 11,000 and then substract 1,000 - 700 = 300 from the count of digit 1. Benchmark and Source code I tested the original approach, the same approach using %10 and the new solution for some large ranges, with these results: Original 104.78 seconds With %10 83.66 With Powers of Ten 0.07 A screenshot of the benchmark application: If you would like to see the full source code or run the benchmark, use these links: Complete Source code (in Clarion): http://sca.mx/ftp/countdigits.txt Compilable project and win32 exe: http://sca.mx/ftp/countdigits.zip Accepted answer noahlavine solution may be correct, but l just couldn’t follow the pseudo code, I think there are some details missing or not completely explained. Aaronaught solution seems to be correct, but the code is just too complex for my taste. I accepted strainer’s answer, because his line of thought guided me to develop this new solution.

  Read the article

• Is there a log file analyzer for log4j files?

  - by Juha Syrjälä

  I am looking for some kind of analyzer tool for log files generated by log4j files. I am looking something more advanced than grep? What are you using for log file analysis? I am looking for following kinds of features: The tool should tell me how many time a given log statement or a stack trace has occurred, preferably with support for some kinds of patterns (eg. number of log statements matching 'User [a-z]* logged in'). Breakdowns by log level (how many INFO, DEBUG lines) and by class that initiated the log message would be nice. Breakdown by date (how many log statements in given time period) What log lines occur commonly together? Support for several files since I am using log rolling Hot spot analysis: find if there is a some time period when there is unusually high number of log statements Either command-line or GUI are fine Open Source is preferred but I am also interested in commercial offerings My log4j configuration uses org.apache.log4j.PatternLayout with pattern %d %p %c - %m%n but that could be adapted for analyzer tool.

  Read the article

• What is a good layout for a somewhat advanced home network and storage solution?

  - by Shaun

  My home network/storage needs are changing and I am searching for some opinions and starting points on what a good network/storage layout would be that can serve my needs for a few years into the future. I think I have a decent starting point for equipment, but I am also willing to invest fairly heavily in a solution that can last me for a while. I am a bit of a tech nerd and I have a moderate tolerance for setup of the solution. I would prefer if maintenance of the system is somewhat low once it is setup, but I am willing to accept some tradeoffs. Existing equipment: Router - Netgear WNDR3700 (gigabit) Router - DLink Gamerlounge DGL-4300 (gigabit) Switch - 16 port Trendnet green switch (gigabit) Switch - 5 port Trendnet green (gigabit) Computer - i7-950 office computer (gigabit ethernet) Computer - Q6600 quad core media center, hooked up to TV, records shows (gigabit ethernet) Computer - Acer 1810T ultraportable laptop (gigabit and N ethernet) NAS - Intel SS4200-E (gigabit) External hard drive - 2TB WD Green drive (esata) All kinds of miscellaneous network connected TV, Bluray, Verizon network extender, HDhomerun TV tuners, etc. Requirements: -Robust backup solution for a growing collection of huge family picture files and personal files, around 1.5TB. (Including offsite backup) -Central location for all user's files, while also keeping them secure from each other. -Storage for terabytes of movie backups and recorded TV, and access to them from all computers (maybe around 4TB eventually) -Possibility to host files to friends and family easily Nice to have: -Backup of terabytes of movie backups Intriguing possibilities: -Capability to have users' Windows desktops and files look the same from all network computers I am not sure if the new Windows Home Server 2011 would fit into this well, if I need a domain server, how best to organize my backups, or how to most effectively use RAID. Currently I am simply backing up all computers to a RAID 1 on the NAS box, which I was thinking could prevent a situation where I reach for a backup and find that the disk is corrupt. One possibility that I am thinking about now is simply using my media center PC with a huge RAID of hard drives on which all files are stored. Pseudo-backup of all files would be present because of the RAID, but important files would also be backed up off site via carrying hard drives to work. But what if corruption seeps into the files and the corrupted data is then backed up? Does RAID protect against this? I really want to take next to zero risks with the irreplaceable files. I can handle some degree of risk with the movies and other files. I'm looking for critiques on this idea as well as other possibilities. To summarize, my goal is high functionality, media capable, and robust backup of irreplaceable files.

  Read the article

• ASP.NET MVC vs. ASP.NET 4.0

  - by CodeMonkey

  I watched this webcast recently, and I got the sense that a lot of the "cool stuff" from ASP.NET MVC is getting pulled back into the ASP.NET framework. At the moment I'm setting the ground-work for a project at my company using ASP.NET MVC, but after watching this, I'm beginning to wonder if that's the right choice, and whether it would behoove me to wait for ASP.NET 4.0. I realize ASP.NET MVC 2.0 is getting close to an actual release. If High-Testability, loose coupling, and having Full control of our HTML are top priorities, which should I choose, ASP.NET 4.0 or ASP.NET MVC?

  Read the article

• Shopping Portal based on XML Data - XSLT or PHP?

  - by buggy1985

  For my bachelor thesis I want to implement a shopping (price comparison) portal prototype based on XML Data. The main requirement is to get a very clear and customizable HTML template, which should be hosted by the customer on his own webserver. I'm not very sure if XSLT meets this requirements, as it generates a lot of xsl-related code. It is not easy to understand for people with little HTML skills. I have some experience with the PHP templating engine Smarty. The syntax is much better, but I'm not sure if it's a good idea to parse the XML data with PHP, as it is very complex. Which language should I choose for a web application with high complexity? XSLT or PHP?

  Read the article

• Language Design: Combining Gotos and Functions

  - by sub

  I'm designing and currently rethinking a low-level interpreted programming language with similarities to assembler. I very soon came across the functions/loops/gotos decision problem and thought that while loops like while and for would be too high-level and unfitting, gotos would be too low level, unmaintainable and generally evil again. Functions like you know them from most languages that have return values and arguments aren't fitting in the language's concept either. So I tried to figure out something between a function and a goto which is capable of Recursion Efficient loops After some thinking I came up with the idea of subroutines: They have a beginning and an end like a function They have a name but no arguments like a goto You can go into one with jump and go out of it again before its end with return (doesn't give back any result, only stops the subroutine) Handled just like normal code - Global scope like goto So I wanted to know: Is the idea above good? What are the (dis)advantages? Would there be a better combination of function and goto or even a completely new idea?

  Read the article

• What is the fastest way to unzip textfiles in Matlab during a function?

  - by Paul

  Hello all, I would like to scan text of textfiles in Matlab with the textscan function. Before I can open the textfile with fid = fopen('C:\path'), I need to unzip the files first. The files have the extension: *.gz There are thousands of files which I need to analyze and high performance is important. I have two ideas: (1) Use an external program an call it from the command line in Matlab (2) Use a Matlab 'zip'toolbox. I have heard of gunzip, but don't know about its performance. Does anyone knows a way to unzip these files as quick as possible from within Matlab? Thanks!

  Read the article

• SElinux process killed while trying to set boolean

  - by Antonio

  I've got a strange problem. I can not allow apache to connect to database at my CentOC 6.4 box: [root@centos6 ~]# setsebool -P httpd_can_network_connect on Killed [root@centos6 ~]# sestatus -b | grep httpd_can_network_connect httpd_can_network_connect off httpd_can_network_connect_cobbler off httpd_can_network_connect_db off I watched log file, but there was no log messages: tail -f /var/log/audit/audit.log UPDATE: There are some information in /var/log/messages: Nov 9 19:07:16 vs302 kernel: setsebool invoked oom-killer: gfp_mask=0x280da, order=0, oom_adj=0, oom_score_adj=0 Nov 9 19:07:16 vs302 kernel: setsebool cpuset=/ mems_allowed=0 Nov 9 19:07:16 vs302 kernel: Pid: 1660, comm: setsebool Not tainted 2.6.32-358.23.2.el6.x86_64 #1 Nov 9 19:07:16 vs302 kernel: Call Trace: Nov 9 19:07:16 vs302 kernel: [<ffffffff810cb641>] ? cpuset_print_task_mems_allowed+0x91/0xb0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111ce40>] ? dump_header+0x90/0x1b0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111d2c2>] ? oom_kill_process+0x82/0x2a0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111d201>] ? select_bad_process+0xe1/0x120 Nov 9 19:07:16 vs302 kernel: [<ffffffff8111d700>] ? out_of_memory+0x220/0x3c0 Nov 9 19:07:16 vs302 kernel: [<ffffffff8112c3dc>] ? __alloc_pages_nodemask+0x8ac/0x8d0 Nov 9 19:07:16 vs302 kernel: [<ffffffff81160d6a>] ? alloc_pages_vma+0x9a/0x150 Nov 9 19:07:16 vs302 kernel: [<ffffffff81143f0b>] ? handle_pte_fault+0x76b/0xb50 Nov 9 19:07:16 vs302 kernel: [<ffffffff81228664>] ? task_has_capability+0xb4/0x110 Nov 9 19:07:16 vs302 kernel: [<ffffffff81004a49>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e Nov 9 19:07:16 vs302 kernel: [<ffffffff8114452a>] ? handle_mm_fault+0x23a/0x310 Nov 9 19:07:16 vs302 kernel: [<ffffffff811485b6>] ? vma_adjust+0x556/0x5e0 Nov 9 19:07:16 vs302 kernel: [<ffffffff810474e9>] ? __do_page_fault+0x139/0x480 Nov 9 19:07:16 vs302 kernel: [<ffffffff81148b8a>] ? vma_merge+0x29a/0x3e0 Nov 9 19:07:16 vs302 kernel: [<ffffffff81149fdc>] ? do_brk+0x26c/0x350 Nov 9 19:07:16 vs302 kernel: [<ffffffff8100ba1d>] ? retint_restore_args+0x5/0x6 Nov 9 19:07:16 vs302 kernel: [<ffffffff81513bfe>] ? do_page_fault+0x3e/0xa0 Nov 9 19:07:16 vs302 kernel: [<ffffffff81510fb5>] ? page_fault+0x25/0x30 Nov 9 19:07:16 vs302 kernel: Mem-Info: Nov 9 19:07:16 vs302 kernel: Node 0 DMA per-cpu: Nov 9 19:07:16 vs302 kernel: CPU 0: hi: 0, btch: 1 usd: 0 Nov 9 19:07:16 vs302 kernel: Node 0 DMA32 per-cpu: Nov 9 19:07:16 vs302 kernel: CPU 0: hi: 186, btch: 31 usd: 30 Nov 9 19:07:16 vs302 kernel: active_anon:132249 inactive_anon:46 isolated_anon:0 Nov 9 19:07:16 vs302 kernel: active_file:56 inactive_file:59 isolated_file:0 Nov 9 19:07:16 vs302 kernel: unevictable:0 dirty:2 writeback:0 unstable:0 Nov 9 19:07:16 vs302 kernel: free:1369 slab_reclaimable:1774 slab_unreclaimable:11588 Nov 9 19:07:16 vs302 kernel: mapped:54 shmem:48 pagetables:1211 bounce:0 Nov 9 19:07:16 vs302 kernel: Node 0 DMA free:2440kB min:72kB low:88kB high:108kB active_anon:12156kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:14648kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:24kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:16kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes Nov 9 19:07:16 vs302 kernel: lowmem_reserve[]: 0 590 590 590 Nov 9 19:07:16 vs302 kernel: Node 0 DMA32 free:3036kB min:3072kB low:3840kB high:4608kB active_anon:516840kB inactive_anon:184kB active_file:224kB inactive_file:236kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:604988kB mlocked:0kB dirty:8kB writeback:0kB mapped:216kB shmem:192kB slab_reclaimable:7072kB slab_unreclaimable:46344kB kernel_stack:880kB pagetables:4828kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:128 all_unreclaimable? no Nov 9 19:07:16 vs302 kernel: lowmem_reserve[]: 0 0 0 0 Nov 9 19:07:16 vs302 kernel: Node 0 DMA: 0*4kB 1*8kB 0*16kB 0*32kB 0*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 2440kB Nov 9 19:07:16 vs302 kernel: Node 0 DMA32: 129*4kB 67*8kB 30*16kB 19*32kB 6*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3036kB Nov 9 19:07:16 vs302 kernel: 182 total pagecache pages Nov 9 19:07:16 vs302 kernel: 0 pages in swap cache Nov 9 19:07:16 vs302 kernel: Swap cache stats: add 0, delete 0, find 0/0 Nov 9 19:07:16 vs302 kernel: Free swap = 0kB Nov 9 19:07:16 vs302 kernel: Total swap = 0kB Nov 9 19:07:16 vs302 kernel: 157439 pages RAM Nov 9 19:07:16 vs302 kernel: 6271 pages reserved Nov 9 19:07:16 vs302 kernel: 2686 pages shared Nov 9 19:07:16 vs302 kernel: 146395 pages non-shared Nov 9 19:07:16 vs302 kernel: [ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name Nov 9 19:07:16 vs302 kernel: [ 271] 0 271 2798 231 0 -17 -1000 udevd Nov 9 19:07:16 vs302 kernel: [ 476] 0 476 2797 230 0 -17 -1000 udevd Nov 9 19:07:16 vs302 kernel: [ 718] 0 718 2279 122 0 0 0 dhclient Nov 9 19:07:16 vs302 kernel: [ 762] 0 762 6909 58 0 -17 -1000 auditd Nov 9 19:07:16 vs302 kernel: [ 787] 0 787 62270 147 0 0 0 rsyslogd Nov 9 19:07:16 vs302 kernel: [ 801] 25 801 40326 2655 0 0 0 named Nov 9 19:07:16 vs302 kernel: [ 850] 0 850 16563 172 0 -17 -1000 sshd Nov 9 19:07:16 vs302 kernel: [ 875] 0 875 23451 240 0 0 0 sshd Nov 9 19:07:16 vs302 kernel: [ 966] 498 966 4780 44 0 0 0 wrapper Nov 9 19:07:16 vs302 kernel: [ 968] 498 968 497404 40812 0 0 0 java Nov 9 19:07:16 vs302 kernel: [ 1057] 0 1057 20216 225 0 0 0 master Nov 9 19:07:16 vs302 kernel: [ 1064] 89 1064 20278 209 0 0 0 qmgr Nov 9 19:07:16 vs302 kernel: [ 1071] 0 1071 27075 121 0 0 0 bash Nov 9 19:07:16 vs302 kernel: [ 1111] 0 1111 24880 350 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1117] 48 1117 24913 351 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1118] 48 1118 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1119] 48 1119 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1120] 48 1120 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1121] 48 1121 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1122] 48 1122 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1124] 48 1124 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1125] 48 1125 24880 337 0 0 0 httpd Nov 9 19:07:16 vs302 kernel: [ 1129] 0 1129 29313 151 0 0 0 crond Nov 9 19:07:16 vs302 kernel: [ 1143] 0 1143 1018 22 0 0 0 agetty Nov 9 19:07:16 vs302 kernel: [ 1146] 0 1146 1015 22 0 0 0 mingetty Nov 9 19:07:16 vs302 kernel: [ 1514] 0 1514 23451 237 0 0 0 sshd Nov 9 19:07:16 vs302 kernel: [ 1517] 0 1517 27075 113 0 0 0 bash Nov 9 19:07:16 vs302 kernel: [ 1641] 89 1641 20236 218 0 0 0 pickup Nov 9 19:07:16 vs302 kernel: [ 1659] 0 1659 25234 39 0 0 0 tail Nov 9 19:07:16 vs302 kernel: [ 1660] 0 1660 89903 85712 0 0 0 setsebool Nov 9 19:07:16 vs302 kernel: Out of memory: Kill process 1660 (setsebool) score 568 or sacrifice child Nov 9 19:07:16 vs302 kernel: Killed process 1660, UID 0, (setsebool) total-vm:359612kB, anon-rss:342708kB, file-rss:140kB

  Read the article

• Rails Associations Question

  - by Mutuelinvestor

  I'm new to rails and have volunteered to help out the local High School Track team with a simple database that tracks the runners performances. For the moment, I have three models: Runners, Race_Data and Races. I have the following associations. Runners have_many Race_Data Races have_many Race_Data I also want create the association Runners Have_Many Races Through Race_Data, but as my look at the diagram I have drawn, there is already a many to one relationship from Race_data to Races. Does the combination of Runners having many Race_Data and Race_Data having one Race imply a Many_to_Many relationship between Runners and Races?

  Read the article

• Python imaging alternatives

  - by Paul McMillan

  I have python code that needs to do just a couple simple things to photographs: crop, resize, and overlay a watermark. I've used PIL, and the resample/resize results are TERRIBLE. I've used imagemagick, and the interface and commands were designed by packaging a cat in a box, and then repeatedly throwing it down a set of stairs at a keyboard. I'm looking for something which is not PIL or Imagemagick that I can use with python to do simple, high-quality image transformations. For that matter, it doesn't even have to have python bindings if the command line interface is good. Oh, and it needs to be relatively platform agnostic, our production servers are linux, but some of our devs develop on windows. It can't require the installation of a bunch of silly gui code to use as a library, either.

  Read the article

• ASP.NET MVC View Engine Comparison

  - by McKAMEY

  EDIT: added a community wiki to begin capturing people's experience with various View Engines. Please respectfully add any experiences you've had. I've been searching on SO & Google for a breakdown of the various View Engines available for ASP.NET MVC, but haven't found much more than simple high-level descriptions of what a view engine is. I'm not necessarily looking for "best" or "fastest" but rather some real world comparisons of advantages / disadvantages of the major players (e.g. the default WebFormViewEngine, MvcContrib View Engines, etc.) for various situations. I think this would be really helpful in determining if switching from the default engine would be advantageous for a given project or development group. Has anyone encountered such a comparison?

  Read the article

• Distributing APNS providers

  - by Sam

  I'm writing a business-focused iPhone app which includes a self-hosted server component. I'd like to include push notification functionality in the server; reading through the programming guide it looks as if this would involve either: Distributing the provider certificate with the server component - this doesn't sound like a terribly good idea (even if Apple permits it?) Hosting a shared notification provider and forwarding notifications to APNS from the servers. For an ongoing, high-availability service, this is likely to require including a subscription pricing component, which I would prefer to avoid. Require customers to apply for their own provider certificate. However, it's not clear whether multiple organisations are allowed to apply for provider certificates with a single bundle ID, and it would significantly increase the barrier to adoption. APNS looks to me as if it's specifically geared for centrally hosted services. Is anyone distributing self-hosted notification providers? Are there any other options?

  Read the article

• How to add a view on top of a UIPopoverController

  - by Noah Witherspoon

  I've got an iPad app with a “drawer” table displayed in a popover. The user can tap-and-hold on an item in the drawer to drag that item out of it and into my main view. That part works fine; unfortunately, the view being dragged appears under the popover, and is too small to be visible until it's dragged out from underneath it. If I add the view as a subview of the view controller in the popover, it gets clipped by the popover's frame, and as I can't access the UIPopoverController's view, I can't disable its layer's masksToBounds—and that probably wouldn't be a great idea anyway. I suspect that I could use an additional UIWindow with a high windowLevel value to force the dragged view to appear on top of the popover, but this seems like overkill. Is there a better solution?

  Read the article

< Previous Page | 252 253 254 255 256 257 258 259 260 261 262 263  | Next Page >