compiler optimization - Page 257

Disk is spinning down each minute, unable to disable it

- by lzap

I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

Read the article

hyperv vss writer unexpected error

- by Eric Martin

I am using Mozy Pro to backup our Hyperv servers. I am doing this without any issues on a 2nd server but this box hasn't backed up sucessfully yet. I was told by the support tech at Mozy to type: vssadmin list providers >c:\providers.txt vssadmin list writers >c:\writers.txt Writers.txt: vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2013 Microsoft Corp. Writer name: 'Task Scheduler Writer' Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124} Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b} State: [1] Stable Last error: No error Writer name: 'VSS Metadata Store Writer' Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06} Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93} State: [1] Stable Last error: No error Writer name: 'Performance Counters Writer' Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2} Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381} State: [1] Stable Last error: No error Writer name: 'System Writer' Writer Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Instance Id: {506e7d9c-ded3-4edf-824a-4dd9af7f7538} State: [1] Stable Last error: No error Writer name: 'ASR Writer' Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4} Writer Instance Id: {1de438e4-09de-487c-9ea8-eeafbe3fd210} State: [1] Stable Last error: No error Writer name: 'COM+ REGDB Writer' Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f} Writer Instance Id: {511d23d9-4cbb-400f-b739-e6e0a8ecdbee} State: [1] Stable Last error: No error Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {32f41185-2b20-41ff-a7aa-92c262f578cd} State: [1] Stable Last error: Unexpected error Writer name: 'Registry Writer' Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485} Writer Instance Id: {fa328ece-623f-43cc-9888-e897e108c40e} State: [1] Stable Last error: No error Writer name: 'Shadow Copy Optimization Writer' Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f} Writer Instance Id: {7b582861-7f7f-4c10-adb1-5106bcab3902} State: [1] Stable Last error: No error Writer name: 'WMI Writer' Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0} Writer Instance Id: {d2f73a0f-c19a-44cc-bcd2-6c84ac6e516b} State: [1] Stable Last error: No error Writer name: 'MSMQ Writer (MSMQ)' Writer Id: {7e47b561-971a-46e6-96b9-696eeaa53b2a} Writer Instance Id: {95ea6efc-c00c-47ca-90d1-28fbe6d7a8d0} State: [1] Stable Last error: No error Writer name: 'IIS Config Writer' Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6} Writer Instance Id: {d5a32f43-0675-400d-8502-cdece4c867e1} State: [1] Stable Last error: No error Providers.txt: vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2013 Microsoft Corp. Provider name: 'Microsoft File Share Shadow Copy provider' Provider type: Fileshare Provider Id: {89300202-3cec-4981-9171-19f59559e0f2} Version: 1.0.0.1 Provider name: 'Microsoft Software Shadow Copy provider 1.0' Provider type: System Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5} Version: 1.0.0.7 The tech said I needed to resolve this issue: Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {32f41185-2b20-41ff-a7aa-92c262f578cd} State: [1] Stable Last error: Unexpected error I checked the event viewer and this is the only thing I found related to hyperv: I don't know where to start to resolve this or to find out where the issue is at. I know nothing of the vss writer for hyperv so any input would be greatly appreciated.

Read the article

ConfigurationManager.AppSettings is empty?

- by Mattousai

Hello All, I have a VS2008 ASP.NET Web Service Application running on the local IIS of my XP machine. A separate project in the same solution uses test methods to invoke the WS calls, and run their processes. When I added a web reference to the WS App, VS2008 created a Settings.settings file in the Properties folder to store the address of the web reference. This process also created a new section in the Web.config file called applicationSettings to store the values from Settings.settings When my application attempts to retrieve configuration values from the appSettings section of the Web.config file, via ConfigurationManager.AppSettings[key], all values are null and AppSettings.AllKeys.Length is always zero. I even reverted the Web.config file to before the web reference was added, and made sure it was exactly the same as a system-generated web.config file for a new project that works fine. After comparing the reverted Web.config and a new Web.config, I addded one simple value in the appSettings section, and still no luck with ConfigurationManager.AppSettings[key]. Here is the reverted Web.config that cannot be read from <?xml version="1.0"?> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings> <add key="testkey" value="testvalue"/> </appSettings> <connectionStrings/> <system.web>  <compilation debug="false"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation>  <authentication mode="Windows" />  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule" /> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory" /> <remove name="ScriptHandlerFactoryAppServices" /> <remove name="ScriptResource" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> </configuration> Has anyone experienced this, or know how to solve the problem? TIA -Matt

Read the article

Maven: Unresolved references to [org.osgi.service.http]

- by Simone Vellei

I'm trying to create a bundle using HttpService for register Servlet using maven-bundle-plugin. The pom.xml of the project is: <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>felix-tutorial</groupId> <artifactId>example-1</artifactId> <version>1.0</version> <packaging>bundle</packaging> <name>Apache Felix Tutorial Example 1</name> <description>Apache Felix Tutorial Example 1</description>  <build> <plugins> <plugin> <groupId>org.apache.felix</groupId> <artifactId>maven-bundle-plugin</artifactId> <extensions>true</extensions> <configuration> <instructions> <Bundle-SymbolicName>${pom.groupId}.${pom.artifactId}</Bundle-SymbolicName> <Bundle-Name>Service listener example</Bundle-Name> <Bundle-Description>A bundle that displays messages at startup and when service events occur</Bundle-Description> <Bundle-Vendor>Apache Felix</Bundle-Vendor> <Bundle-Version>1.0.0</Bundle-Version> <Bundle-Activator>tutorial.example1.Activator</Bundle-Activator> <Import-Package>org.osgi.framework;version="1.0.0", javax.servlet, javax.servlet.http</Import-Package> </instructions> </configuration> </plugin> </plugins> </build>  <dependencies> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.framework</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>4.8.1</version> <scope>test</scope> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.api</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.base</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.bridge</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.bundle</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.proxy</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.whiteboard</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.osgi</groupId> <artifactId>osgi_R4_compendium</artifactId> <version>1.0</version> </dependency> </dependencies> </project> "mvn install" command returns the following error: [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------ [INFO] Building Apache Felix Tutorial Example 1 [INFO] task-segment: [install] [INFO] ------------------------------------------------------------------------ Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-resources-plugin/2.3/maven-resources-plugin-2.3.pom Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-resources-plugin/2.3/maven-resources-plugin-2.3.jar Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-install-plugin/2.2/maven-install-plugin-2.2.pom Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-install-plugin/2.2/maven-install-plugin-2.2.jar Downloading: http://repo1.maven.org/maven2/org/apache/maven/shared/maven-filtering/1.0-beta-2/maven-filtering-1.0-beta-2.pom Downloading: http://repo1.maven.org/maven2/org/codehaus/plexus/plexus-interpolation/1.6/plexus-interpolation-1.6.pom Downloading: http://repo1.maven.org/maven2/org/codehaus/plexus/plexus-interpolation/1.6/plexus-interpolation-1.6.jar Downloading: http://repo1.maven.org/maven2/org/apache/maven/shared/maven-filtering/1.0-beta-2/maven-filtering-1.0-beta-2.jar [INFO] [resources:resources {execution: default-resources}] [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] skip non existing resourceDirectory C:\eclipse\ws\stripes-bundle\src\main\resources [INFO] [compiler:compile {execution: default-compile}] [INFO] Nothing to compile - all classes are up to date [INFO] [resources:testResources {execution: default-testResources}] [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] skip non existing resourceDirectory C:\eclipse\ws\stripes-bundle\src\test\resources [INFO] [compiler:testCompile {execution: default-testCompile}] [INFO] Nothing to compile - all classes are up to date [INFO] [surefire:test {execution: default-test}] [INFO] Surefire report directory: C:\eclipse\ws\stripes-bundle\target\surefire-reports ------------------------------------------------------- T E S T S ------------------------------------------------------- Running com.beanopoly.stripes.AppTest Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.031 sec Results : Tests run: 1, Failures: 0, Errors: 0, Skipped: 0 [INFO] [bundle:bundle {execution: default-bundle}] [ERROR] Error building bundle felix-tutorial:example-1:bundle:1.0 : Unresolved references to [org.osgi.service.http] by class(es) on the Bundle-Classpath[Jar:do [ERROR] Error(s) found in bundle configuration [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Error(s) found in bundle configuration [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 12 seconds [INFO] Finished at: Sat Mar 27 13:11:47 CET 2010 [INFO] Final Memory: 12M/21M [INFO] ------------------------------------------------------------------------

Read the article

Steganography : Encoded audio and video file not being played, getting corrupted. What is the issue

- by Shantanu Gupta

I have made a steganography program to encrypt/Decrypt some text under image audio and video. I used image as bmp(54 byte header) file, audio as wav(44 byte header) file and video as avi(56 byte header) file formats. When I tries to encrypt text under all these file then it gets encrypted successfully and are also getting decrypted correctly. But it is creating a problem with audio and video i.e these files are not being played after encrypted result. What can be the problem. I am working on Turbo C++ compiler. I know it is super outdated compiler but I have to do it in this only. Here is my code to encrypt. int Binary_encode(char *txtSourceFileName, char *binarySourceFileName, char *binaryTargetFileName,const short headerSize) { long BinarySourceSize=0,TextSourceSize=0; char *Buffer; long BlockSize=10240, i=0; ifstream ReadTxt, ReadBinary; //reads ReadTxt.open(txtSourceFileName,ios::binary|ios::in);//file name, mode of open, here input mode i.e. read only if(!ReadTxt) { cprintf("\nFile can not be opened."); return 0; } ReadBinary.open(binarySourceFileName,ios::binary|ios::in);//file name, mode of open, here input mode i.e. read only if(!ReadBinary) { ReadTxt.close();//closing opened file cprintf("\nFile can not be opened."); return 0; } ReadBinary.seekg(0,ios::end);//setting pointer to a file at the end of file. ReadTxt.seekg(0,ios::end); BinarySourceSize=(long )ReadBinary.tellg(); //returns the position of pointer TextSourceSize=(long )ReadTxt.tellg(); //returns the position of pointer ReadBinary.seekg(0,ios::beg); //sets the pointer to the begining of file ReadTxt.seekg(0,ios::beg); //sets the pointer to the begining of file if(BinarySourceSize<TextSourceSize*50) //Minimum size of an image should be 50 times the size of file to be encrypted { cout<<"\n\n"; cprintf("Binary File size should be bigger than text file size."); ReadBinary.close(); ReadTxt.close(); return 0; } cout<<"\n"; cprintf("\n\nSize of Source Image/Audio File is : "); cout<<(float)BinarySourceSize/1024; cprintf("KB"); cout<<"\n"; cprintf("Size of Text File is "); cout<<TextSourceSize; cprintf(" Bytes"); cout<<"\n"; getch(); //write header to file without changing else file will not open //bmp image's header size is 53 bytes Buffer=new char[headerSize]; ofstream WriteBinary; // writes to file WriteBinary.open(binaryTargetFileName,ios::binary|ios::out|ios::trunc);//file will be created or truncated if already exists ReadBinary.read(Buffer,headerSize);//reads no of bytes and stores them into mem, size contains no of bytes in a file WriteBinary.write(Buffer,headerSize);//writes header to 2nd image delete[] Buffer;//deallocate memory /* Buffer = new char[sizeof(long)]; Buffer = (char *)(&TextSourceSize); cout<<Buffer; */ WriteBinary.write((char *)(&TextSourceSize),sizeof(long)); //writes no of byte to be written in image immediate after header ends //to decrypt file if(!(Buffer=new char[TextSourceSize])) { cprintf("Enough Memory could not be assigned."); return 0; } ReadTxt.read(Buffer,TextSourceSize);//read all data from text file ReadTxt.close();//file no more needed WriteBinary.write(Buffer,TextSourceSize);//writes all text file data into image delete[] Buffer;//deallocate memory //replace Tsize+1 below with Tsize and run the program to see the change //this is due to the reason that 50-54 byte no are of colors which we will be changing ReadBinary.seekg(TextSourceSize+1,ios::cur);//move pointer to the location-current loc i.e. 53+content of text file //write remaining image content to image file while(i<BinarySourceSize-headerSize-TextSourceSize+1) { i=i+BlockSize; Buffer=new char[BlockSize]; ReadBinary.read(Buffer,BlockSize);//reads no of bytes and stores them into mem, size contains no of bytes in a file WriteBinary.write(Buffer,BlockSize); delete[] Buffer; //clear memory, else program can fail giving correct output } ReadBinary.close(); WriteBinary.close(); //Encoding Completed return 0; } Code to decrypt int Binary_decode(char *binarySourceFileName, char *txtTargetFileName, const short headerSize) { long TextDestinationSize=0; char *Buffer; long BlockSize=10240; ifstream ReadBinary; ofstream WriteText; ReadBinary.open(binarySourceFileName,ios::binary|ios::in);//file will be appended if(!ReadBinary) { cprintf("File can not be opened"); return 0; } ReadBinary.seekg(headerSize,ios::beg); Buffer=new char[4]; ReadBinary.read(Buffer,4); TextDestinationSize=*((long *)Buffer); delete[] Buffer; cout<<"\n\n"; cprintf("Size of the File that will be created is : "); cout<<TextDestinationSize; cprintf(" Bytes"); cout<<"\n\n"; sleep(1); WriteText.open(txtTargetFileName,ios::binary|ios::out|ios::trunc);//file will be created if not exists else truncate its data while(TextDestinationSize>0) { if(TextDestinationSize<BlockSize) BlockSize=TextDestinationSize; Buffer= new char[BlockSize]; ReadBinary.read(Buffer,BlockSize); WriteText.write(Buffer,BlockSize); delete[] Buffer; TextDestinationSize=TextDestinationSize-BlockSize; } ReadBinary.close(); WriteText.close(); return 0; } int text_encode(char *SourcefileName, char *DestinationfileName) { ifstream fr; //reads ofstream fw; // writes to file char c; int random; clrscr(); fr.open(SourcefileName,ios::binary);//file name, mode of open, here input mode i.e. read only if(!fr) { cprintf("File can not be opened."); getch(); return 0; } fw.open(DestinationfileName,ios::binary|ios::out|ios::trunc);//file will be created or truncated if already exists while(fr) { int i; while(fr!=0) { fr.get(c); //reads a character from file and increments its pointer char ch; ch=c; ch=ch+1; fw<<ch; //appends character in c to a file } } fr.close(); fw.close(); return 0; } int text_decode(char *SourcefileName, char *DestinationName) { ifstream fr; //reads ofstream fw; // wrrites to file char c; int random; clrscr(); fr.open(SourcefileName,ios::binary);//file name, mode of open, here input mode i.e. read only if(!fr) { cprintf("File can not be opened."); return 0; } fw.open(DestinationName,ios::binary|ios::out|ios::trunc);//file will be created or truncated if already exists while(fr) { int i; while(fr!=0) { fr.get(c); //reads a character from file and increments its pointer char ch; ch=c; ch=ch-1; fw<<ch; //appends character in c to a file } } fr.close(); fw.close(); return 0; }

Read the article

TomCat starts, but does not load properly

- by user37136

Hey guys, I've been working on this for a day now and still don't know what's wrong. I am essentially building a second environment for our web and app server. I got apache to load up just fine, but tomcat is proving to be difficult. It appears to start and load just fine, but when it comes to loading our application, its just got stuck for 2-5 minutes and then shut down. Here is the log on the original machine where it works fine: 2010-02-12 11:52:40,506 INFO Web application servlet context is initializing... 2010-02-12 11:52:40,540 DEBUG Servlet context attribute added: select_jobType=[{1,Undefined}, {100,Completion}, {200,Plugging}, {300,R+M}, {400,Workover}, {500,Swab - tubing}, {600,Swab - fluid}] 2010-02-12 11:52:40,540 DEBUG Servlet context attribute added: select_jobTaskType=[{1,Undefined}, {100,Rod part}, {200,Tubing leak}, {300,Pump change}, {400,Stripping job}, {500,Long stroke}, {600,A/L optimization}] 2010-02-12 11:52:40,541 DEBUG Servlet context attribute added: select_wellType=[{1,Undefined}, {100,Rod pump}, {200,ESP}, {300,Injector}, {400,PC pump}, {500,Co-Rod}, {600,Flowing}, {700,Storage}] 2010-02-12 11:52:40,541 DEBUG Servlet context attribute added: select_assetType=[{1,Rig}, {100,Disabled rig}] 2010-02-12 11:52:40,542 DEBUG Servlet context attribute added: select_state=[{AL,Alabama}, {AK,Alaska}, {AZ,Arizona}, {AR,Arkansas}, {CA,California}, {CO,Colorado}, {CT,Connecticut}, {DE,Delaware}, {FL,Florida}, {GA,Georgia}, {HI,Hawaii}, {ID,Idaho}, {IL,Illinois}, {IN,Indiana}, {IA,Iowa}, {KS,Kansas}, {KY,Kentucky}, {LA,Louisiana}, {ME,Maine}, {MD,Maryland}, {MA,Massachusetts}, {MI,Michigan}, {MN,Minnesota}, {MS,Mississippi}, {MO,Missouri}, {MT,Montana}, {NE,Nebraska}, {NV,Nevada}, {NH,New Hampshire}, {NJ,New Jersey}, {NM,New Mexico}, {NY,New York}, {NC,North Carolina}, {ND,North Dakota}, {OH,Ohio}, {OK,Oklahoma}, {OR,Oregon}, {PA,Pennsylvania}, {RI,Rhode Island}, {SC,South Carolina}, {SD,South Dakota}, {TN,Tennessee}, {TX,Texas}, {UT,Utah}, {VT,Vermont}, {VA,Virginia}, {WA,Washington}, {WV,West Virginia}, {WI,Wisconsin}, {WY,Wyoming}, {ACO,Atlantic Coast Offshore}, {FOAK,Federal Offshore Alaska}, {NGOM,Northern Gulf of Mexico}, {PCO,Pacific Coastal Offshore}] 2010-02-12 11:52:40,542 INFO KeyviewContextMonitor.contextInitialized: Loaded drop-down lists:com/key/portal/web/common/lists.properties 2010-02-12 11:52:40,937 DEBUG Servlet context attribute added: org.apache.struts.action.SERVLET_MAPPING=*.do 2010-02-12 11:52:40,937 DEBUG Servlet context attribute added: org.apache.struts.action.ACTION_SERVLET=org.apache.struts.action.ActionServlet@155d578 2010-02-12 11:52:41,939 DEBUG Servlet context attribute added: org.apache.struts.action.MODULE=org.apache.struts.config.impl.ModuleConfigImpl@e08e9d 2010-02-12 11:52:41,962 DEBUG Servlet context attribute added: org.apache.struts.action.FORM_BEANS=org.apache.struts.action.ActionFormBeans@b31c3c 2010-02-12 11:52:41,967 DEBUG Servlet context attribute added: org.apache.struts.action.FORWARDS=org.apache.struts.action.ActionForwards@102c646 2010-02-12 11:52:41,973 DEBUG Servlet context attribute added: org.apache.struts.action.MAPPINGS=org.apache.struts.action.ActionMappings@127276a 2010-02-12 11:52:41,974 DEBUG Servlet context attribute added: org.apache.struts.action.MESSAGE=org.apache.struts.util.PropertyMessageResources@18cae13 2010-02-12 11:52:41,984 DEBUG Servlet context attribute added: org.apache.struts.action.PLUG_INS=[Lorg.apache.struts.action.PlugIn;@f875ae 2010-02-12 11:52:46,816 INFO Sucessfully loaded application properties com/key/core/properties/application On my second environment, it didn't execute the last line. I start tomcat with the exact same command line !/bin/ksh export JAVA_HOME=/app/java export CATALINA_HOME=/app/tomcat export CATALINA_BASE=/app/keyview/appserver CATALINA_OPTS=" -Xms128m -Xmx800m -Dapplication.props=com/key/core/properties/application -Dlog4j.configuration=com/key/core/log/log4j.xml -Djava.awt.headless=true -Dlog4j.debug" export CATALINA_OPTS ${CATALINA_HOME}/bin/startup.sh I bolded the line that I think are in error. Thanks

Read the article

rotating bitmaps. In code.

- by Marco van de Voort

Is there a faster way to rotate a large bitmap by 90 or 270 degrees than simply doing a nested loop with inverted coordinates? The bitmaps are 8bpp and typically 2048*2400*8bpp Currently I do this by simply copying with argument inversion, roughly (pseudo code: for x = 0 to 2048-1 for y = 0 to 2048-1 dest[x][y]=src[y][x]; (In reality I do it with pointers, for a bit more speed, but that is roughly the same magnitude) GDI is quite slow with large images, and GPU load/store times for textures (GF7 cards) are in the same magnitude as the current CPU time. Any tips, pointers? An in-place algorithm would even be better, but speed is more important than being in-place. Target is Delphi, but it is more an algorithmic question. SSE(2) vectorization no problem, it is a big enough problem for me to code it in assembler Duplicates How do you rotate a two dimensional array?. Follow up to Nils' answer Image 2048x2700 - 2700x2048 Compiler Turbo Explorer 2006 with optimization on. Windows: Power scheme set to "Always on". (important!!!!) Machine: Core2 6600 (2.4 GHz) time with old routine: 32ms (step 1) time with stepsize 8 : 12ms time with stepsize 16 : 10ms time with stepsize 32+ : 9ms Meanwhile I also tested on a Athlon 64 X2 (5200+ iirc), and the speed up there was slightly more than a factor four (80 to 19 ms). The speed up is well worth it, thanks. Maybe that during the summer months I'll torture myself with a SSE(2) version. However I already thought about how to tackle that, and I think I'll run out of SSE2 registers for an straight implementation: for n:=0 to 7 do begin load r0, <source+n*rowsize> shift byte from r0 into r1 shift byte from r0 into r2 .. shift byte from r0 into r8 end; store r1, <target> store r2, <target+1*<rowsize> .. store r8, <target+7*<rowsize> So 8x8 needs 9 registers, but 32-bits SSE only has 8. Anyway that is something for the summer months :-) Note that the pointer thing is something that I do out of instinct, but it could be there is actually something to it, if your dimensions are not hardcoded, the compiler can't turn the mul into a shift. While muls an sich are cheap nowadays, they also generate more register pressure afaik. The code (validated by subtracting result from the "naieve" rotate1 implementation): const stepsize = 32; procedure rotatealign(Source: tbw8image; Target:tbw8image); var stepsx,stepsy,restx,resty : Integer; RowPitchSource, RowPitchTarget : Integer; pSource, pTarget,ps1,ps2 : pchar; x,y,i,j: integer; rpstep : integer; begin RowPitchSource := source.RowPitch; // bytes to jump to next line. Can be negative (includes alignment) RowPitchTarget := target.RowPitch; rpstep:=RowPitchTarget*stepsize; stepsx:=source.ImageWidth div stepsize; stepsy:=source.ImageHeight div stepsize; // check if mod 16=0 here for both dimensions, if so -> SSE2. for y := 0 to stepsy - 1 do begin psource:=source.GetImagePointer(0,y*stepsize); // gets pointer to pixel x,y ptarget:=Target.GetImagePointer(target.imagewidth-(y+1)*stepsize,0); for x := 0 to stepsx - 1 do begin for i := 0 to stepsize - 1 do begin ps1:=@psource[rowpitchsource*i]; // ( 0,i) ps2:=@ptarget[stepsize-1-i]; // (maxx-i,0); for j := 0 to stepsize - 1 do begin ps2[0]:=ps1[j]; inc(ps2,RowPitchTarget); end; end; inc(psource,stepsize); inc(ptarget,rpstep); end; end; // 3 more areas to do, with dimensions // - stepsy*stepsize * restx // right most column of restx width // - stepsx*stepsize * resty // bottom row with resty height // - restx*resty // bottom-right rectangle. restx:=source.ImageWidth mod stepsize; // typically zero because width is // typically 1024 or 2048 resty:=source.Imageheight mod stepsize; if restx>0 then begin // one loop less, since we know this fits in one line of "blocks" psource:=source.GetImagePointer(source.ImageWidth-restx,0); // gets pointer to pixel x,y ptarget:=Target.GetImagePointer(Target.imagewidth-stepsize,Target.imageheight-restx); for y := 0 to stepsy - 1 do begin for i := 0 to stepsize - 1 do begin ps1:=@psource[rowpitchsource*i]; // ( 0,i) ps2:=@ptarget[stepsize-1-i]; // (maxx-i,0); for j := 0 to restx - 1 do begin ps2[0]:=ps1[j]; inc(ps2,RowPitchTarget); end; end; inc(psource,stepsize*RowPitchSource); dec(ptarget,stepsize); end; end; if resty>0 then begin // one loop less, since we know this fits in one line of "blocks" psource:=source.GetImagePointer(0,source.ImageHeight-resty); // gets pointer to pixel x,y ptarget:=Target.GetImagePointer(0,0); for x := 0 to stepsx - 1 do begin for i := 0 to resty- 1 do begin ps1:=@psource[rowpitchsource*i]; // ( 0,i) ps2:=@ptarget[resty-1-i]; // (maxx-i,0); for j := 0 to stepsize - 1 do begin ps2[0]:=ps1[j]; inc(ps2,RowPitchTarget); end; end; inc(psource,stepsize); inc(ptarget,rpstep); end; end; if (resty>0) and (restx>0) then begin // another loop less, since only one block psource:=source.GetImagePointer(source.ImageWidth-restx,source.ImageHeight-resty); // gets pointer to pixel x,y ptarget:=Target.GetImagePointer(0,target.ImageHeight-restx); for i := 0 to resty- 1 do begin ps1:=@psource[rowpitchsource*i]; // ( 0,i) ps2:=@ptarget[resty-1-i]; // (maxx-i,0); for j := 0 to restx - 1 do begin ps2[0]:=ps1[j]; inc(ps2,RowPitchTarget); end; end; end; end;

Read the article

Ubuntu Server 12.04 CPU Load

- by zertux

I have a Server (2x Hexa-Core Xeon E5649 2.53GHz w/HT with 32GB RAM and 20000 GB Bandwidth) running Ubuntu Server 12.04 LTS. The server runs LAMP and serves one website only, the estimated number of users is to be ~ 15,000 at the same time. At the moment i have around 2000 users online each of them runs 50 MySQL queries (small values mostly select and insert) from the beginning until the end of the session. Server CPU Load is high at this number of connections while the RAM usage is almost 1GB out of 32GB its worth mentioning that the server was running very fast with no problems at all but am concerned about the load average. http://s12.postimage.org/z7hi6mz3h/photo.png top - 03:02:43 up 9 min, 2 users, load average: 50.83, 30.14, 12.83 Tasks: 432 total, 1 running, 430 sleeping, 0 stopped, 1 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 66.5%id, 33.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32939992k total, 3111604k used, 29828388k free, 84108k buffers Swap: 2048280k total, 0k used, 2048280k free, 1621640k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2860 root 20 0 25820 2288 1420 S 3 0.0 0:11.18 htop 1182 root 20 0 0 0 0 D 2 0.0 0:01.46 kjournald 1935 mysql 20 0 12.3g 161m 7924 S 1 0.5 102:31.45 mysqld 11 root 20 0 0 0 0 S 0 0.0 0:00.38 kworker/0:1 1822 www-data 20 0 247m 25m 4188 D 0 0.1 0:01.81 apache2 2920 www-data 20 0 0 0 0 Z 0 0.0 0:01.20 apache2 <defunct> 2942 www-data 20 0 247m 23m 3056 D 0 0.1 0:00.20 apache2 3516 www-data 20 0 247m 23m 3028 D 0 0.1 0:00.06 apache2 3521 www-data 20 0 247m 23m 3020 D 0 0.1 0:00.09 apache2 3664 www-data 20 0 247m 23m 3132 D 0 0.1 0:00.09 apache2 3674 www-data 20 0 247m 23m 3252 D 0 0.1 0:00.06 apache2 3713 www-data 20 0 247m 23m 3040 D 0 0.1 0:00.09 apache2 1 root 20 0 24328 2284 1344 S 0 0.0 0:03.09 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.01 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 root@server:~/codes# vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 19 0 0 29684012 86112 1689844 0 0 19 590 254 231 48 0 47 5 23 0 0 29704812 86128 1697672 0 0 4 320 11100 8121 77 1 22 0 33 0 0 29671044 86156 1705308 0 0 0 5440 13190 9140 95 1 4 0 33 3 0 29670088 86160 1706288 0 0 0 32932 12275 7297 99 0 1 0 35 0 0 29693456 86188 1710724 0 0 4 676 12701 7867 98 1 1 0 ^C I have not changed any of the default configurations that comes with Ubuntu. Is this load normal for such powerful server ? is there any optimization i can make to Apache/MySQL to minimize the load ? What do you recommend ?

Read the article

how to bind repeater control as message threading

- by Shalin Gajjar

i have crm application. i have one difficulties that how i bind repeater control as message threading. like first thread as question and second thread as answer of that question. if user asked multiple question then first,second,.. threads as question and.as it is like message chatting... for keeping data from database i use this stored procedure: set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[ViewMessageThreads] (@inquiry_id varchar(50)) AS BEGIN SET NOCOUNT ON; select i.body as master_body, h.body as history_body, q.body as question_body, q.Created_date as question_timestamp, a.body as answer_body, a.Created_date as answer_timestamp, t.Type_name as user_type from tbl_Inquiry_History i left join tbl_Inquiry_master h on h.Inquiry_id=i.Inquiry_id left join tbl_Question q on q.Inquiry_id=i.Inquiry_id left join tbl_Answer a on a.Question_id=q.Inquiry_id left join tbl_User_master u on u.Id=i.User_id left join tbl_Login_master l on l.Id=u.User_id left join tbl_Type t on t.Id = l.type_id where (i.Inquiry_id=@inquiry_id) END and this gives me result as: master_body history_body question_body question_t.. answer_body answer_t.. user_type __________________________________________________________________________________________ question 1 NULL question 1 2005-03-14... NULL NULL User question 1 NULL question 2 2005-03-14... NULL NULL User and i include this design source of repeater: <asp:Repeater ID="Repeater_Inquiry_Messages" runat="server"> <ItemTemplate> <table id="ctl00_ContentPlaceHolder1_dl_ticketmsg" cellspacing="0" border="0" style="width:100%;border-collapse:collapse;"> <tbody><tr> <td style="background-color:#F5F5FF;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody><tr> <td class="header"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> <td class="normaltext" valign="bottom"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_tagline">Message By <b><asp:Label ID="lbl_user_t" runat="server" Text='<%#Eval("user_type")%>'/></b> on <asp:Label ID="lbldatetime" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "question_timestamp","{0:ddd, dd MMMM yyyy}")%>'/></span></td> </tr> <tr> <td class="header">  </td> <td class="normaltext" valign="bottom"> <b>Message :</b><br> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_Label1"><asp:Label ID="lbl_inquiry_desc" runat="server" Text='<%#Eval("question_body")%>'/></span></td> </tr> </tbody></table> </td> </tr> </tbody></table> </ItemTemplate> <SeparatorTemplate> <table> <tr> <td style="height:3px"></td> </tr> </table> </SeparatorTemplate> <ItemTemplate> <table id="ctl00_ContentPlaceHolder1_dl_ticketmsg1" cellspacing="0" border="0" style="width:100%;border-collapse:collapse;"> <tbody><tr> <td style="background-color:#F5F5FF;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody><tr> <td class="header"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> <td class="normaltext" valign="bottom"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_lbl_tagline">Message By <b><asp:Label ID="Label1" runat="server" Text='<%#Eval("user_type")%>'/></b> on <asp:Label ID="Label2" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "answer_timestamp","{0:ddd, dd MMMM yyyy}")%>'/></span></td> </tr> <tr> <td class="header">  </td> <td class="normaltext" valign="bottom"> <b>Message :</b><br> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_Label1"><asp:Label ID="Label3" runat="server" Text='<%#Eval("answer_body")%>'/></span></td> </tr> <tr> <td class="header">  </td> <td class="normaltext" valign="bottom"> <b></b> </td> </tr> </tbody></table> </td> </tr> </tbody></table> </ItemTemplate> </asp:Repeater> how ever this gives me only question thread while i commenting up this second message thread. ----------------------------------------Updated--------------------------------------- please help me.. ---------------------------------------Updated---------------------------------------- Server Error in '/OmInvestmentStockMarketing_new' Application. Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS1026: ) expected Source Error: Line 162: <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> Line 163: <td class="normaltext" valign="bottom"> Line 164: <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_tagline">Message By <b><asp:Label ID="lbl_user_t" runat="server" Text='<%# If(Eval("cargo2").ToString() Is "Admin", "You", Eval("cargo2"))%>'/></b> Line 165: on <asp:Label ID="lbldatetime" runat="server" Text='<%# DataBinder.Eval(Container.DataItem,"cargo1","{0:ddd, dd MMMM yyyy}")%>'/></span></td> Line 166: </tr> Source File: c:\Documents and Settings\Vishal\My Documents\Visual Studio 2005\WebSites\OmInvestmentStockMarketing_new\Admin\OWM_Inquiry.aspx Line: 164 Show Detailed Compiler Output: Show Complete Compilation Source: Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.3053

Read the article

How to tune system settings for mongoDB on Linux?

- by jsh

Trying to squeeze a lot out of one question here -- please bear with me. Although the MongoDB man pages make several useful recommendations about system settings like ulimit (http://docs.mongodb.org/manual/reference/ulimit/), and other production factors (http://docs.mongodb.org/manual/administration/production-notes/) they seem mysteriously silent on things like virtual memory and swap settings. The closest we get to a hint is that "...the operating system’s virtual memory subsystem manages MongoDB’s memory..." (http://docs.mongodb.org/manual/faq/fundamentals/#does-mongodb-require-a-lot-of-ram). Running the same job - high writes and high reads on about 10,000,000 records in a single collection -- on my 4-processor, 4GB RAM macbook and an 8-core ubuntu box with 64GB RAM I saw dramatically WORSE read performance on the linux box with factory settings, and could hear the disk constantly spinning, indicating high I/O and presumably swapping. Yes, other things were happening on the box, but there was plenty of free RAM, disk space, etc.; furthermore, I did not see evidence that Mongo was expanding to take advantage of all that free RAM as it is touted to do. Linux box default settings were as follows: vm.swappiness =60 vm.dirty_background_ratio = 10 vm.dirty_ratio = 20 vm.dirty_expire_centisecs =3000 vm.dirty_writeback_centisecs=500 I hazarded some guesses looking at docs and blogs for other types of databases (Oracle, MYSQL, etc.), experimented, and adjusted as below. vm.swappiness=10 vm.dirty_background_ratio=5 vm.dirty_ratio=5 vm.dirty_writeback_centisecs=250 vm.dirty_expire_centisecs=500 I saw some immediate apparent improvements in read time. However, when I ran my test jobs again, read performance continued to be painfully sluggish during heavy writes. Then, I REBUILT the collection from an available data source - and suddenly I can read at 1ms or less per record WHILE doing the write job! So the question is really two-fold: 1) What are appropriate VM settings for MongoDB on Linux? 2) (bonus) Does Mongo do some checking or optimization with the OS while data is being built? In other words, if I have built a large data set with suboptimal VM or I/O settings, does Mongo make assumptions during the memory-mapping process that will fail to take advantage of optimizations down the road? Obviously I don't fully grok memory mapping under the hood (I was hoping I wouldn't have to). Any help appreciated...thanks! -j

Read the article

Adobe Photoshop Vs Lightroom Vs Aperture

- by Aditi

Adobe Photoshop is the standard choice for photographers, graphic artists and Web designers. Adobe Photoshop Lightroom & Apple’s Aperture are also in the same league but the usage is vastly different. Although Photoshop is most popular & widely used by photographers, but in many ways it’s less relevant to photographers than ever before. As Lightroom & Aperture is aimed squarely at photographers for photo-processing. With this write up we are going to help you choose what is right for you and why. Adobe Photoshop Adobe Photoshop is the most liked tool for the detailed photo editing & designing work. Photoshop provides great features for rollover and Image slicing. Adobe Photoshop includes comprehensive optimization features for producing the highest quality Web graphics with the smallest possible file sizes. You can also create startling animations with it. Designers & Editors know how important precise masking is, PhotoShop lets you do that with various detailing tools. Art history brush, contact sheets, and history palette are some of the smart features, which add to its viability. Download Whether you’re producing printed pages or moving images, you can work more efficiently and produce better results because of its smooth integration across other adobe applications. Buy supporting layer effects, it allows you to quickly add drop shadows, inner and outer glows, bevels, and embossing to layers. It also provides Seamless Web Graphics Workflow. Photoshop is hands-down the BEST for editing. Photoshop Cons: • Slower, less precise editing features in Bridge • Processing lots of images requires actions and can be slower than exporting images from Lightroom • Much slower with editing and processing a large number of images Aperture Apple Aperture is aimed at the professional photographer who shoots predominantly raw files. It helps them to manage their workflow and perform their initial Raw conversion in a better way. Aperture provides adjustment tools such as Histogram to modify color and white balance, but most of the editing of photos is left for Photoshop. It gives users the option of seeing their photographs laid out like slides or negatives on a light table. It boasts of – stars, color-coding and easy techniques for filtering and picking images. Aperture has moved forward few steps than Photoshop, but most of the editing work has been left for Photoshop as it features seamless Photoshop integration. Aperture Pros: Aperture is a step up from the iPhoto software that comes with every Mac, and fairly easy to learn. Adjustments are made in a logical order from top to bottom of the menu. You can store the images in a library or any folder you choose. Aperture also works really well with direct Canon files. It is just $79 if you buy it through Apple’s App Store Moving forward, it will run on the iPad, and possibly the iPhone – Adobe products like Lightroom and Photoshop may never offer these options It is much nicer and simpler user interface. Lightroom Lightroom does a smashing job of basic fixing and editing. It is more advanced tool for photographers. They can use it to have a startling photography effect. Light room has many advanced features, which makes it one of the best tools for photographers and far ahead of the other two. They are Nondestructive editing. Nothing is actually changed in an image until the photo is exported. Better controls over organizing your photos. Lightroom helps to gather a group of photos to use in a slideshow. Lightroom has larger Compare and Survey views of images. Quickly customizable interface. Simple keystrokes allow you to perform different All Lightroom controls are kept available in panels right next to the photos. Always-available History palette, it doesn’t go when you close lightroom. You gain more colors to work with compared to Photoshop and with more precise control. Local control, or adjusting small parts of a photo without affecting anything else, has long been an important part of photography. In Lightroom 2, you can darken, lighten, and affect color and change sharpness and other aspects of specific areas in the photo simply by brushing your cursor across the areas. Photoshop has far more power in its Cloning and Healing Brush tools than Lightroom, but Lightroom offers simple cloning and healing that’s nondestructive. Lightroom supports the RAW formats of more cameras than Aperture. Lightroom provides the option of storing images outside the application in the file system. It costs less than photoshop. Download Why PhotoShop is advanced than Lightroom? There are countless image processing plug-ins on the market for doing specialized processing in Photoshop. For example, if your image needs sophisticated noise reduction, you can use the Noiseware plug-in with Photoshop to do a much better job or noise removal than Lightroom can do. Lightroom’s advantages over Aperture 3 Will always have better integration with Photoshop. Lightroom is backed by bigger and more active user community (So abundant availability for tutorials, etc.) Better noise reduction tool. Especially for photographers the Lens-distortion correction tool is perfect Lightroom Cons: • Have to Import images to work on them • Slows down with over 10,000 images in the catalog • For processing just one or two images this is a slower workflow Photoshop Pros: • ACR has the same RAW processing controls as Lightroom • ACR Histogram is specialized to the chosen color space (Lightroom is locked into ProPhoto RGB color space with an sRGB tone curve) • Don’t have to Import images to open in Bridge or ACR • Ability to customize processing of RAW images with Photoshop Actions Pricing and Availability Get LightRoomGet PhotoShop Latest version Of Photoshop can be purchased from Adobe store and Adobe authorized reseller and it costs US$999. Latest version of Aperture can be bought for US$199 from Apple Online store or Mac App Store. You can buy latest version of LightRoom from Adobe Store or Adobe Authorized reseller for US$299. Related posts:Adobe Photoshop CS5 vs Photoshop CS5 extended Web based Alternatives to Photoshop 10 Free Alternatives for Adobe Photoshop Software

Read the article

Parallelism in .NET – Part 20, Using Task with Existing APIs

- by Reed

Although the Task class provides a huge amount of flexibility for handling asynchronous actions, the .NET Framework still contains a large number of APIs that are based on the previous asynchronous programming model. While Task and Task<T> provide a much nicer syntax as well as extending the flexibility, allowing features such as continuations based on multiple tasks, the existing APIs don’t directly support this workflow. There is a method in the TaskFactory class which can be used to adapt the existing APIs to the new Task class: TaskFactory.FromAsync. This method provides a way to convert from the BeginOperation/EndOperation method pair syntax common through .NET Framework directly to a Task<T> containing the results of the operation in the task’s Result parameter. While this method does exist, it unfortunately comes at a cost – the method overloads are far from simple to decipher, and the resulting code is not always as easily understood as newer code based directly on the Task class. For example, a single call to handle WebRequest.BeginGetResponse/EndGetReponse, one of the easiest “pairs” of methods to use, looks like the following: var task = Task.Factory.FromAsync<WebResponse>( request.BeginGetResponse, request.EndGetResponse, null); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The compiler is unfortunately unable to infer the correct type, and, as a result, the WebReponse must be explicitly mentioned in the method call. As a result, I typically recommend wrapping this into an extension method to ease use. For example, I would place the above in an extension method like: public static class WebRequestExtensions { public static Task<WebResponse> GetReponseAsync(this WebRequest request) { return Task.Factory.FromAsync<WebResponse>( request.BeginGetResponse, request.EndGetResponse, null); } } This dramatically simplifies usage. For example, if we wanted to asynchronously check to see if this blog supported XHTML 1.0, and report that in a text box to the user, we could do: var webRequest = WebRequest.Create("http://www.reedcopsey.com"); webRequest.GetReponseAsync().ContinueWith(t => { using (var sr = new StreamReader(t.Result.GetResponseStream())) { string str = sr.ReadLine();; this.textBox1.Text = string.Format("Page at {0} supports XHTML 1.0: {1}", t.Result.ResponseUri, str.Contains("XHTML 1.0")); } }, TaskScheduler.FromCurrentSynchronizationContext()); By using a continuation with a TaskScheduler based on the current synchronization context, we can keep this request asynchronous, check based on the first line of the response string, and report the results back on our UI directly.

Read the article

Oracle OpenWorld Preview: Real World Perspectives from Oracle WebCenter Customers

- by Christie Flanagan

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} If you frequent the Oracle WebCenter blog you’ve probably read a lot about the customer experience revolution over the last few months. An important aspect of the customer experience revolution is the increasing role that peers play in influencing how others perceive a product, brand or solution, simply by sharing their own, real-world experiences. Think about it, who do you trust more -- marketers and sales people pitching polished messages or peers with similar roles and similar challenges to the ones you face in your business every day? With this spirit in mind, this polished marketer personally invites you to hear directly from Oracle WebCenter customers about their real-life experiences during our customer panel sessions at Oracle OpenWorld next week. If you’re currently using WebCenter, thinking about it, or just want to find out more about best practices in social business, next-generation portals, enterprise content management or web experience management, be sure to attend these sessions: CON8899 - Becoming a Social Business: Stories from the Front Lines of Change Wednesday, Oct 3, 11:45 AM - 12:45 PM - Moscone West - 3000Priscilla Hancock - Vice President/CIO, University of Louisville Kellie Christensen - Director of Information Technology, Banner EngineeringWhat does it really mean to be a social business? How can you change your organization to embrace social approaches? What pitfalls do you need to avoid? In this lively panel discussion, customer and industry thought leaders in social business explore these topics and more as they share their stories of the good, the bad, and the ugly that can happen when embracing social methods and technologies to improve business success. Using moderated questions and open Q&A from the audience, the panel discusses vital topics such as the critical factors for success, the major issues to avoid, how to gain senior executive support for social efforts, how to handle undesired behavior, and how to measure business impact. This session will take a thought-provoking look at becoming a social business from the inside. CON8900 - Building Next-Generation Portals: An Interactive Customer Panel DiscussionWednesday, Oct 3, 5:00 PM - 6:00 PM - Moscone West - 3000Roberts Wayne - Director, IT, Canadian Partnership Against CancerMike Beattie - VP Application Development, Aramark Uniform ServicesJohn Chen - Utilities Services Manager 6, Los Angeles Department of Water & PowerJörg Modlmayr - Head of Product Managment, Siemens AGSocial and collaborative technologies have changed how people interact, learn, and collaborate, and providing a modern, social Web presence is imperative to remain competitive in today’s market. Can your business benefit from a more collaborative and interactive portal environment for employees, customers, and partners? Attend this session to hear from Oracle WebCenter Portal customers as they share their strategies and best practices for providing users with a modern experience that adapts to their needs and includes personalized access to content in context. The panel also addresses how customers have benefited from creating next-generation portals by migrating from older portal technologies to Oracle WebCenter Portal. CON8898 - Land Mines, Potholes, and Dirt Roads: Navigating the Way to ECM NirvanaThursday, Oct 4, 12:45 PM - 1:45 PM - Moscone West - 3001Stephen Madsen - Senior Management Consultant, Alberta Agriculture and Rural DevelopmentHimanshu Parikh - Sr. Director, Enterprise Architecture & Middleware, Ross Stores, Inc.Ten years ago, people were predicting that by this time in history, we’d be some kind of utopian paperless society. As we all know, we're not there yet, but are we getting closer? What is keeping companies from driving down the road to enterprise content management bliss? Most people understand that using ECM as a central platform enables organizations to expedite document-centric processes, but most business processes in organizations are still heavily paper-based. Many of these processes could be automated and improved with an ECM platform infrastructure. In this panel discussion, you’ll hear from Oracle WebCenter customers that have already solved some of these challenges as they share their strategies for success and roads to avoid along your journey. CON8897 - Using Web Experience Management to Drive Online Marketing SuccessThursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West - 3001Blane Nelson - Chief Architect, Ancestry.comMike Remedios - CIO, ArbonneCaitlin Scanlon - Product Manager, Monster WorldwideEvery year, the online channel becomes more imperative for driving organizational top-line revenue, but for many companies, mastering how to best market their products and services in a fast-evolving online world with high customer expectations for personalized experiences can be a complex proposition. Come to this panel discussion, and hear directly from customers on how they are succeeding today by using Web experience management to drive marketing success, using capabilities such as targeting and optimization, user-generated content, mobile site publishing, and site visitor personalization to deliver engaging online experiences. Your Handy Guide to WebCenter at Oracle OpenWorld Want a quick and easy guide to all the keynotes, demos, hands-on labs and WebCenter sessions you definitely don't want to miss at Oracle OpenWorld? Download this handy guide, Focus on WebCenter. More helpful links: * Oracle OpenWorld* Oracle Customer Experience Summit @ OpenWorld* Oracle OpenWorld on Facebook * Oracle OpenWorld on Twitter* Oracle OpenWorld on LinkedIn* Oracle OpenWorld Blog

Read the article

CodePlex Daily Summary for Sunday, March 07, 2010

CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

Read the article

ASP.NET Server-side comments

- by nmarun

I believe a good number of you know about Server-side commenting. This blog is just like a revival to refresh your memories. When you write comments in your .aspx/.ascx files, people usually write them as: 1:  To show that it actually makes a difference for using the server-side commenting technique, I’ve started a web application project and my default.aspx page looks like this: 1: <%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="ServerSideComment._Default" %> 2: <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> 3: </asp:Content> 4: <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> 5: <h2> 6:  7: Welcome to ASP.NET! 8: </h2> 9: <p> 10: To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>. 11: </p> 12: <p> 13: You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&clcid=0x409" 14: title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>. 15: </p> 16: </asp:Content> See the comment in line 6 and when I run the app, I can do a view source on the browser which shows up as: 1: <h2> 2:  3: Welcome to ASP.NET! 4: </h2> Using Fiddler shows the page size as: Let’s change the comment style and use server-side commenting technique. 1: <h2> 2: <%-- This is a comment --%> 3: Welcome to ASP.NET! 4: </h2> Upon rendering, the view source looks like: 1: <h2> 2: 3: Welcome to ASP.NET! 4: </h2> Fiddler now shows the page size as: The difference is that client-side comments are ignored by the browser, but they are still sent down the pipe. With server-side comments, the compiler ignores everything inside this block. Visual Studio’s Text Editor toolbar also puts comments as server-side ones. If you want to give it a shot, go to your design page and press Ctrl+K, Ctrl+C on some selected text and you’ll see it commented in the server-side commenting style.

Read the article

Getting the innermost .NET Exception

- by Rick Strahl

Here's a trivial but quite useful function that I frequently need in dynamic execution of code: Finding the innermost exception when an exception occurs, because for many operations (for example Reflection invocations or Web Service calls) the top level errors returned can be rather generic. A good example - common with errors in Reflection making a method invocation - is this generic error: Exception has been thrown by the target of an invocation In the debugger it looks like this: In this case this is an AJAX callback, which dynamically executes a method (ExecuteMethod code) which in turn calls into an Amazon Web Service using the old Amazon WSE101 Web service extensions for .NET. An error occurs in the Web Service call and the innermost exception holds the useful error information which in this case points at an invalid web.config key value related to the System.Net connection APIs. The "Exception has been thrown by the target of an invocation" error is the Reflection APIs generic error message that gets fired when you execute a method dynamically and that method fails internally. The messages basically says: "Your code blew up in my face when I tried to run it!". Which of course is not very useful to tell you what actually happened. If you drill down the InnerExceptions eventually you'll get a more detailed exception that points at the original error and code that caused the exception. In the code above the actually useful exception is two innerExceptions down. In most (but not all) cases when inner exceptions are returned, it's the innermost exception that has the information that is really useful. It's of course a fairly trivial task to do this in code, but I do it so frequently that I use a small helper method for this: /// <summary> /// Returns the innermost Exception for an object /// </summary> /// <param name="ex"></param> /// <returns></returns> public static Exception GetInnerMostException(Exception ex) { Exception currentEx = ex; while (currentEx.InnerException != null) { currentEx = currentEx.InnerException; } return currentEx; } This code just loops through all the inner exceptions (if any) and assigns them to a temporary variable until there are no more inner exceptions. The end result is that you get the innermost exception returned from the original exception. It's easy to use this code then in a try/catch handler like this (from the example above) to retrieve the more important innermost exception: object result = null; string stringResult = null; try { if (parameterList != null) // use the supplied parameter list result = helper.ExecuteMethod(methodToCall,target, parameterList.ToArray(), CallbackMethodParameterType.Json,ref attr); else // grab the info out of QueryString Values or POST buffer during parameter parsing // for optimization result = helper.ExecuteMethod(methodToCall, target, null, CallbackMethodParameterType.Json, ref attr); } catch (Exception ex) { Exception activeException = DebugUtils.GetInnerMostException(ex); WriteErrorResponse(activeException.Message, ( HttpContext.Current.IsDebuggingEnabled ? ex.StackTrace : null ) ); return; } Another function that is useful to me from time to time is one that returns all inner exceptions and the original exception as an array: /// <summary> /// Returns an array of the entire exception list in reverse order /// (innermost to outermost exception) /// </summary> /// <param name="ex">The original exception to work off</param> /// <returns>Array of Exceptions from innermost to outermost</returns> public static Exception[] GetInnerExceptions(Exception ex) { List<Exception> exceptions = new List<Exception>(); exceptions.Add(ex); Exception currentEx = ex; while (currentEx.InnerException != null) { exceptions.Add(ex); } // Reverse the order to the innermost is first exceptions.Reverse(); return exceptions.ToArray(); } This function loops through all the InnerExceptions and returns them and then reverses the order of the array returning the innermost exception first. This can be useful in certain error scenarios where exceptions stack and you need to display information from more than one of the exceptions in order to create a useful error message. This is rare but certain database exceptions bury their exception info in mutliple inner exceptions and it's easier to parse through them in an array then to manually walk the exception stack. It's also useful if you need to log errors and want to see the all of the error detail from all exceptions. None of this is rocket science, but it's useful to have some helpers that make retrieval of the critical exception info trivial. Resources DebugUtils.cs utility class in the West Wind Web Toolkit© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp .NET

Read the article

SQLAuthority News – Community Tech Days – A SQL Legends in Ahmedabad – December 11, 2010

- by pinaldave

Ahmedabad is going to be fortunate city again on December 11. We are going to have SQL Server Legends present at the prestigious event of Community Tech Days in Ahmedabad. The venue details are as following: H K Hall, H K College Campus, Near Handloom House, Opp. Natraj Cinema, Ashram Road, Ahmedabad – 380009 Click here to Registration for the event. Agenda of the event is as following. 10:15am – 10:30am Welcome – Pinal Dave 10:30am – 11:15am SQL Tips and Tricks for .NET Developers by Jacob Sebastian 11:15am – 11:30am Tea Break 11:30am – 12:15pm Best Database Practice for SharePoint Server by Pinal Dave 12:15pm – 01:00pm Self Service Business Intelligence by Rushabh Mehta 01:00pm – 02:00pm Lunch 02:00pm – 02:45pm Managing your future, Managing your time by Vinod Kumar 02:45pm – 03:30pm Windows Azure News and Introducing Storage Services by Mahesh Devjibhai Dhola 03:30pm – 03:45pm Tea Break 03:45pm – 04:30pm Improve Silverlight application with Threads and MEF by Prabhjot Singh Bakshi 04:30pm – 04:45pm Thank you – Mahesh Devjibhai Dhola Ahmedabad considers itself extremely fortunate when there are SQL Legends presenting on various subjects in front of community. Here is brief introduction about them in my own words. (Their names are in order of the agenda). 1) Jacob Sebastian (SQL Server MVP) – This person needs no introduction. Every developer and programmer in Ahmedabad and India knows him. He is the one man who is founder of various community-related ideas like SQL Challenges, SQL Quiz and BeyondRelational. He works with me on all the community-related activities; we are extremely good friends. 2) Rushabh Mehta (SQL Server MVP) – If you use SQL Server – you know this man. He is the President of SQL Server of Professional Association (PASS) and one of the leading Business Intelligence (BI) Experts renowned in the world. He has blessed Ahmedabad once before and now doing once again this year. 3) Vinod Kumar (Microsoft Evangelist – SQL Server & BI) – Ahmedabad remembers him very well. During his last visit to Ahmedabad, a fight had almost broke outside the hall amidst the rush to listen him. There were more people standing and listening to him than those who were seated. This is one man Ahmedabad will never forget. 4) and Myself. I will not rate myself in the league of abovementioned experts, but I must say that I am fortunate to have friends like those above. We also have two strong .NET presenters – Mahesh and Prabhjot. During this event, there will be plenty of giveaways, lots of fun, demos and pure technical talk, specifically no marketing and promotion – just pure technical talk. The most interesting part is that all the SQL Legends – Jacob, Rushabh and Vinod are for sure presenting on SQL Server but with a twist. Jacob – He is going to talk about .NET and SQL – Optimization Techniques Rushabh – He is going to talk about SQL and BI – Self Service BI Vinod – He is going to talk about professional development of developers – Managing Time Pinal – Best Practices for SharePoint Database Administrators – SharePoint DBA – I have presented this session earlier. I promise this event is going to be one of the best events held ever. You can read about the earlier event over here. ?Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

Read the article

Subterranean IL: Pseudo custom attributes

- by Simon Cooper

Custom attributes were designed to make the .NET framework extensible; if a .NET language needs to store additional metadata on an item that isn't expressible in IL, then an attribute could be applied to the IL item to represent this metadata. For instance, the C# compiler uses DecimalConstantAttribute and DateTimeConstantAttribute to represent compile-time decimal or datetime constants, which aren't allowed in pure IL, and FixedBufferAttribute to represent fixed struct fields. How attributes are compiled Within a .NET assembly are a series of tables containing all the metadata for items within the assembly; for instance, the TypeDef table stores metadata on all the types in the assembly, and MethodDef does the same for all the methods and constructors. Custom attribute information is stored in the CustomAttribute table, which has references to the IL item the attribute is applied to, the constructor used (which implies the type of attribute applied), and a binary blob representing the arguments and name/value pairs used in the attribute application. For example, the following C# class: [Obsolete("Please use MyClass2", true)] public class MyClass { // ... } corresponds to the following IL class definition: .class public MyClass { .custom instance void [mscorlib]System.ObsoleteAttribute::.ctor(string, bool) = { string('Please use MyClass2' bool(true) } // ... } and results in the following entry in the CustomAttribute table: TypeDef(MyClass) MemberRef(ObsoleteAttribute::.ctor(string, bool)) blob -> {string('Please use MyClass2' bool(true)} However, there are some attributes that don't compile in this way. Pseudo custom attributes Just like there are some concepts in a language that can't be represented in IL, there are some concepts in IL that can't be represented in a language. This is where pseudo custom attributes come into play. The most obvious of these is SerializableAttribute. Although it looks like an attribute, it doesn't compile to a CustomAttribute table entry; it instead sets the serializable bit directly within the TypeDef entry for the type. This flag is fully expressible within IL; this C#: [Serializable] public class MySerializableClass {} compiles to this IL: .class public serializable MySerializableClass {} For those interested, a full list of pseudo custom attributes is available here. For the rest of this post, I'll be concentrating on the ones that deal with P/Invoke. P/Invoke attributes P/Invoke is built right into the CLR at quite a deep level; there are 2 metadata tables within an assembly dedicated solely to p/invoke interop, and many more that affect it. Furthermore, all the attributes used to specify p/invoke methods in C# or VB have their own keywords and syntax within IL. For example, the following C# method declaration: [DllImport("mscorsn.dll", SetLastError = true)] [return: MarshalAs(UnmanagedType.U1)] private static extern bool StrongNameSignatureVerificationEx( [MarshalAs(UnmanagedType.LPWStr)] string wszFilePath, [MarshalAs(UnmanagedType.U1)] bool fForceVerification, [MarshalAs(UnmanagedType.U1)] ref bool pfWasVerified); compiles to the following IL definition: .method private static pinvokeimpl("mscorsn.dll" lasterr winapi) bool marshal(unsigned int8) StrongNameSignatureVerificationEx( string marshal(lpwstr) wszFilePath, bool marshal(unsigned int8) fForceVerification, bool& marshal(unsigned int8) pfWasVerified) cil managed preservesig {} As you can see, all the p/invoke and marshal properties are specified directly in IL, rather than using attributes. And, rather than creating entries in CustomAttribute, a whole bunch of metadata is emitted to represent this information. This single method declaration results in the following metadata being output to the assembly: A MethodDef entry containing basic information on the method Four ParamDef entries for the 3 method parameters and return type An entry in ModuleRef to mscorsn.dll An entry in ImplMap linking ModuleRef and MethodDef, along with the name of the function to import and the pinvoke options (lasterr winapi) Four FieldMarshal entries containing the marshal information for each parameter. Phew! Applying attributes Most of the time, when you apply an attribute to an element, an entry in the CustomAttribute table will be created to represent that application. However, some attributes represent concepts in IL that aren't expressible in the language you're coding in, and can instead result in a single bit change (SerializableAttribute and NonSerializedAttribute), or many extra metadata table entries (the p/invoke attributes) being emitted to the output assembly.

Read the article

ASP.NET, HTTP 404 and SEO

- by paxer

The other day our SEO Manager told me that he is not happy about the way ASP.NET application return HTTP response codes for Page Not Found (404) situation. I've started research and found interesting things, which could probably help others in similar situation. 1) By default ASP.NET application handle 404 error by using next web.config settings <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.html"/> </customErrors> However this approach has a problem, and this is actually what our SEO manager was talking about. This is what HTTP return to request in case of Page not Found situation. So first of all it return HTTP 302 Redirect code and then HTTP 200 - ok code. The problem : We need to have HTTP 404 response code at the end of response for SEO purposes. Solution 1 Let's change a bit our web.config settings to handle 404 error not on static html page but on .aspx page <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.aspx"/> </customErrors> And now let's add in Page_Load event on 404.aspx page next lines protected void Page_Load(object sender, EventArgs e) { Response.StatusCode = 404; } Now let's run our test again Now it has got better, last HTTP response code is 404, but my SEO manager still was not happy, becouse we still have 302 code before it, and as he said this is bad for Google search optimization. So we need to have only 404 HTTP code alone. Solution 2 Let's comment our web.config settings  Now, let's open our Global.asax file, or if it does not exist in your project - add it. Then we need to add next logic which will detect if server error code is 404 (Page not found) then handle it. protected void Application_Error(object sender, EventArgs e) { Exception ex = Server.GetLastError(); if (ex is HttpException) { if (((HttpException)(ex)).GetHttpCode() == 404) Server.Transfer("~/404.html"); } // Code that runs when an unhandled error occurs Server.Transfer("~/GenericError.htm"); } Cool, now let's start our test again... Yehaa, looks like now we have only 404 HTTP response code, SEO manager and Google are happy and so do i:) Hope this helps!

Read the article

Oracle Enterprise Data Quality: Ever Integration-ready

- by Mala Narasimharajan

It is closing in on a year now since Oracle’s acquisition of Datanomic, and the addition of Oracle Enterprise Data Quality (EDQ) to the Oracle software family. The big move has caused some big shifts in emphasis and some very encouraging excitement from the field. To give an illustration, combined with a shameless promotion of how EDQ can help to give quick insights into your data, I did a quick Phrase Profile of the subject field of emails to the Global EDQ mailing list since it was set up last September. The results revealed a very clear theme: Integration, Integration, Integration! As well as the important Siebel and Oracle Data Integrator (ODI) integrations, we have been asked about integration with a huge variety of Oracle applications, including EBS, Peoplesoft, CRM on Demand, Fusion, DRM, Endeca, RightNow, and more - and we have not stood still! While it would not have been possible to develop specific pre-integrations with all of the above within a year, we have developed a package of feature-rich out-of-the-box web services and batch processes that can be plugged into any application or middleware technology with ease. And with Siebel, they work out of the box. Oracle Enterprise Data Quality version 9.0.4 includes the Customer Data Services (CDS) pack – a ready set of standard processes with standard interfaces, to provide integrated: Address verification and cleansing Individual matching Organization matching The services can are suitable for either Batch or Real-Time processing, and are enabled for international data, with simple configuration options driving the set of locale-specific dictionaries that are used. For example, large dictionaries are provided to support international name transcription and variant matching, including highly specialized handling for Arabic, Japanese, Chinese and Korean data. In total across all locales, CDS includes well over a million dictionary entries. Excerpt from EDQ’s CDS Individual Name Standardization Dictionary CDS has been developed to replace the OEM of Informatica Identity Resolution (IIR) for attached Data Quality on the Oracle price list, but does this in a way that creates a ‘best of both worlds’ situation for customers, who can harness not only the out-of-the-box functionality of pre-packaged matching and standardization services, but also the flexibility of OEDQ if they want to customize the interfaces or the process logic, without having to learn more than one product. From a competitive point of view, we believe this stands us in good stead against our key competitors, including Informatica, who have separate ‘Identity Resolution’ and general DQ products, and IBM, who provide limited out-of-the-box capabilities (with a steep learning curve) in both their QualityStage data quality and Initiate matching products. Here is a brief guide to the main services provided in the pack: Address Verification and Standardization EDQ’s CDS Address Cleaning Process The Address Verification and Standardization service uses EDQ Address Verification (an OEM of Loqate software) to verify and clean addresses in either real-time or batch. The Address Verification processor is wrapped in an EDQ process – this adds significant capabilities over calling the underlying Address Verification API directly, specifically: Country-specific thresholds to determine when to accept the verification result (and therefore to change the input address) based on the confidence level of the API Optimization of address verification by pre-standardizing data where required Formatting of output addresses into the input address fields normally used by applications Adding descriptions of the address verification and geocoding return codes The process can then be used to provide real-time and batch address cleansing in any application; such as a simple web page calling address cleaning and geocoding as part of a check on individual data. Duplicate Prevention Unlike Informatica Identity Resolution (IIR), EDQ uses stateless services for duplicate prevention to avoid issues caused by complex replication and synchronization of large volume customer data. When a record is added or updated in an application, the EDQ Cluster Key Generation service is called, and returns a number of key values. These are used to select other records (‘candidates’) that may match in the application data (which has been pre-seeded with keys using the same service). The ‘driving record’ (the new or updated record) is then presented along with all selected candidates to the EDQ Matching Service, which decides which of the candidates are a good match with the driving record, and scores them according to the strength of match. In this model, complex multi-locale EDQ techniques can be used to generate the keys and ensure that the right balance between performance and matching effectiveness is maintained, while ensuring that the application retains control of data integrity and transactional commits. The process is explained below: EDQ Duplicate Prevention Architecture Note that where the integration is with a hub, there may be an additional call to the Cluster Key Generation service if the master record has changed due to merges with other records (and therefore needs to have new key values generated before commit). Batch Matching In order to allow customers to use different match rules in batch to real-time, separate matching templates are provided for batch matching. For example, some customers want to minimize intervention in key user flows (such as adding new customers) in front end applications, but to conduct a more exhaustive match on a regular basis in the back office. The batch matching jobs are also used when migrating data between systems, and in this case normally a more precise (and automated) type of matching is required, in order to minimize the review work performed by Data Stewards. In batch matching, data is captured into EDQ using its standard interfaces, and records are standardized, clustered and matched in an EDQ job before matches are written out. As with all EDQ jobs, batch matching may be called from Oracle Data Integrator (ODI) if required. When working with Siebel CRM (or master data in Siebel UCM), Siebel’s Data Quality Manager is used to instigate batch jobs, and a shared staging database is used to write records for matching and to consume match results. The CDS batch matching processes automatically adjust to Siebel’s ‘Full Match’ (match all records against each other) and ‘Incremental Match’ (match a subset of records against all of their selected candidates) modes. The Future The Customer Data Services Pack is an important part of the Oracle strategy for EDQ, offering a clear path to making Data Quality Assurance an integral part of enterprise applications, and providing a strong value proposition for adopting EDQ. We are planning various additions and improvements, including: An out-of-the-box Data Quality Dashboard Even more comprehensive international data handling Address search (suggesting multiple results) Integrated address matching The EDQ Customer Data Services Pack is part of the Enterprise Data Quality Media Pack, available for download at http://www.oracle.com/technetwork/middleware/oedq/downloads/index.html.

Read the article

Getting a Web Resource Url in non WebForms Applications

- by Rick Strahl

WebResources in ASP.NET are pretty useful feature. WebResources are resources that are embedded into a .NET assembly and can be loaded from the assembly via a special resource URL. WebForms includes a method on the ClientScriptManager (Page.ClientScript) and the ScriptManager object to retrieve URLs to these resources. For example you can do: ClientScript.GetWebResourceUrl(typeof(ControlResources), ControlResources.JQUERY_SCRIPT_RESOURCE); GetWebResourceUrl requires a type (which is used for the assembly lookup in which to find the resource) and the resource id to lookup. GetWebResourceUrl() then returns a nasty old long URL like this: WebResource.axd?d=-b6oWzgbpGb8uTaHDrCMv59VSmGhilZP5_T_B8anpGx7X-PmW_1eu1KoHDvox-XHqA1EEb-Tl2YAP3bBeebGN65tv-7-yAimtG4ZnoWH633pExpJor8Qp1aKbk-KQWSoNfRC7rQJHXVP4tC0reYzVw2&t=634533278261362212 While lately excessive resource usage has been frowned upon especially by MVC developers who tend to opt for content distributed as files, I still think that Web Resources have their place even in non-WebForms applications. Also if you have existing assemblies that include resources like scripts and common image links it sure would be nice to access them from non-WebForms pages like MVC views or even in plain old Razor Web Pages. Where's my Page object Dude? Unfortunately natively ASP.NET doesn't have a mechanism for retrieving WebResource Urls outside of the WebForms engine. It's a feature that's specifically baked into WebForms and that relies specifically on the Page HttpHandler implementation. Both Page.ClientScript (obviously) and ScriptManager rely on a hosting Page object in order to work and the various methods off these objects require control instances passed. The reason for this is that the script managers can inject scripts and links into Page content (think RegisterXXXX methods) and for that a Page instance is required. However, for many other methods - like GetWebResourceUrl() - that simply return resources or resource links the Page reference is really irrelevant. While there's a separate ClientScriptManager class, it's marked as sealed and doesn't have any public constructors so you can't create your own instance (without Reflection). Even if it did the internal constructor it does have requires a Page reference. No good… So, can we get access to a WebResourceUrl generically without running in a WebForms Page instance? We just have to create a Page instance ourselves and use it internally. There's nothing intrinsic about the use of the Page class in ClientScript, at least for retrieving resources and resource Urls so it's easy to create an instance of a Page for example in a static method. For our needs of retrieving ResourceUrls or even actually retrieving script resources we can use a canned, non-configured Page instance we create on our own. The following works just fine: public static string GetWebResourceUrl(Type type, string resource ) { Page page = new Page(); return page.ClientScript.GetWebResourceUrl(type, resource); } A slight optimization for this might be to cache the created Page instance. Page tends to be a pretty heavy object to create each time a URL is required so you might want to cache the instance: public class WebUtils { private static Page CachedPage { get { if (_CachedPage == null) _CachedPage = new Page(); return _CachedPage; } } private static Page _CachedPage; public static string GetWebResourceUrl(Type type, string resource) { return CachedPage.ClientScript.GetWebResourceUrl(type, resource); } } You can now use GetWebResourceUrl in a Razor page like this: <!DOCTYPE html> <html <head> <script src="@WebUtils.GetWebResourceUrl(typeof(ControlResources),ControlResources.JQUERY_SCRIPT_RESOURCE)"> </script> </head> <body> <div class="errordisplay"> <img src="@WebUtils.GetWebResourceUrl(typeof(ControlResources),ControlResources.WARNING_ICON_RESOURCE)" /> This is only a Test! </div> </body> </html> And voila - there you have WebResources served from a non-Page based application. WebResources may be a on the way out, but legacy apps have them embedded and for some situations, like fallback scripts and some common image resources I still like to use them. Being able to use them from non-WebForms applications should have been built into the core ASP.NETplatform IMHO, but seeing that it's not this workaround is easy enough to implement.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET MVC Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

SQLAuthority News – Training and Consultancy and Travel – Story of 30 Last 30 Days

- by pinaldave

Today’s blog post is not technical as usual. Here, I present a real story, and I also invite you all to share your thoughts or opinions on this post. I am a professional SQL Server Trainer; I also do consultation in the area of the Performance Tuning and Query Optimizations. In any month, I like the mix of both in my schedule. I prefer to do training for one week, and then commit the next week for some consultation work. Due to the advancement in technology, for most of the consultation works, there is no client location visit or first time visit for understanding the project. Usually, I conduct high-end training sessions or 400 level training, and these training sessions are very intensive most of the time. Always after completing the training for 5 days straight away at 400 level, I make sure to take out some time to cool down and relax. During this time, I prefer to work on optimization projects. Consultancy is great as it keeps me updated regarding what is going on in the real world. As we all know, all those trainers who have real world experience are always considered to be the best trainers. My learning is immense during my consultations with the real client and while resolving real problems. I share the same with my students the very next week when I go for training sessions. For the same reason, every class is different from the previous ones. An experience trainer would tell you that the class is best if it is driven by Students the way instructor wants! The best scenario is as described above; but you won’t get the best scenario all the time. I was on road for nearly 25 days out of the last 30 days and involved in doing various SQL Server-related trainings. Here is what I have done in the last 30 days. I have gathered the following details from my expenditure reports, which are maintained by my wife. There are few points related to my personal expenses and few other related to business. I maintain a separate list for each of these expenses, but here I have aggregated them. Last 30 days - Training 23 days - 4 – two days training classes – 8 days of training 3 – five days training classes – 15 days of training 1 – one day training classes – 2 days of training Flights 18 flights - 8 – Kingfisher 6 – Spicejet 2 – Jet light 2 – Jet connect Stay in different cities Hyderabad – 16 days Chennai – 6 days Bangalore – 2 days Ahmedabad – 6 days (Hometown) Meals – 54 (Averaging less than 2 per day) Room Services – 16 times Training Campuses – 20 times Restaurants – 6 times Home – 12 times Taxi/Cabs – 64 times (Averaging more than 2 per day) Hotel Cab – 34 times Meru Cab – 8 times Easy Cabs – 10 times Auto Rickshaw – 2 times Looking at the above statistics, I can see that I have eaten less than what I should have, which is not good, and traveled in taxi more than what I should have. Also the temperatures in different cities were very different, not to mention the humidity as well. I missed my family, especially my little girl (9 months). When I was at home, I used to have a proper healthy meal every single day; however, when I was traveling, the food was something I had to compromise on. I have previously written about my travel experience with different airlines, my opinion is still same about them. Well, I have question to all of you road warriors, how do you manage your health and enthusiasm during situations I am going through. I have couple of time stomach upset as well sour throat. I drink lots of water and do my best to keep up. Any idea? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Off The Beaten Path—Three Things Growing Midsize Companies are Thankful For

- by Christine Randle

By: Jim Lein, Senior Director, Oracle Accelerate Last Sunday I went on a walkabout. That’s when I just step out the door of my Colorado home and hike through the mountains for hours with no predetermined destination. I favor “social trails”, the unmapped routes pioneered by both animal and human explorers. These tracks are usually more challenging than established, marked routes and you can’t be 100% sure of where you’re going to end up. But I’ve found the rewards to be much greater. For awhile, I pondered on how—depending upon your perspective—the current economic situation worldwide could be viewed as either a classic “the glass is half empty” or a “the glass is half full” scenario. Midsize companies buy Oracle to grow and so I’m continually amazed and fascinated by the success stories our customers relate to me. Oracle’s successful midsize companies are growing via innovation, agility, and opportunity. For them, the glass isn’t half full—it’s overflowing. Growing Midsize Companies are Thankful for: Innovation The sun angling through the pine trees reminded me of a conversation with a European customer a year ago May. You might not recognize the name but, chances are, your local evening weather report relies on this company’s weather observation, monitoring and measurement products. For decades, the company was recognized in its industry for product innovation, but its recent rapid growth comes from tailoring end to end product and service solutions based on the needs of distinctly different customer groups across industrial, public sector, and defense sectors. Hours after that phone call I was walking my dog in a local park and came upon a small white plastic box sprouting short antennas and dangling by a nylon cord from a tree branch. I cut it down. The name of that customer’s company was stamped on the housing. “It’s a radiosonde from a high altitude weather balloon,” he told me the next day. “Keep it as a souvenir.” It sits on my fireplace mantle and elicits many questions from guests. Growing Midsize Companies are Thankful for: Agility In July, I had another interesting discussion with the CFO of an Asia-Pacific company which owns and operates a large portfolio of leisure assets. They are best known for their epic outdoor theme parks. However, their primary growth today is coming from a chain of indoor amusement centers in the USA where billiards, bowling, and laser tag take the place of roller coasters, kiddy rides, and wave pools. With mountains and rivers right out my front door, I’m not much for theme parks, but I’ll take a spirited game of laser tag any day. This company has grown dramatically since first implementing Oracle ERP more than a decade ago. Their profitable expansion into a completely foreign market is derived from the ability to replicate proven and efficient best business practices across diverse operating environments. They recently went live on Oracle’s Fusion HCM and Taleo. Their CFO explained to me how, with thousands of employees in three countries, Fusion HCM and Taleo would enable them to remain incredibly agile by acting on trends linking individual employee performance to their management, establishing and maintaining those best practices. Growing Midsize Companies are Thankful for: Opportunity I have three GPS apps on my iPhone. I use them mainly to keep track of my stats—distance, time, and vertical gain. However, every once in awhile I need to find the most efficient route back home before dark from my current location (notice I didn’t use the word “lost”). In August I listened in on an interview with the CFO of another European company that designs and delivers telematics solutions—the integrated use of telecommunications and informatics—for managing the mobile workforce. These solutions enable customers to achieve evolutionary step-changes in their performance and service delivery. Forgive the overused metaphor, but this is route optimization on steroids. The company’s executive team saw an opportunity in this emerging market and went “all in”. Consequently, they are being rewarded with tremendous growth results and market domination by providing the ability for their clients to collect and analyze performance information related to fuel consumption, service workforce safety, and asset productivity. This Thanksgiving, I’m thankful for health, family, friends, and a career with an innovative company that helps companies leverage top tier software to drive and manage growth. And I’m thankful to have learned the lesson that good things happen when you get off the beaten path—both when hiking and when forging new routes through a complex world economy. Halfway through my walkabout on Sunday, after scrambling up a long stretch of scree-covered hill, I crested a ridge with an obstructed view of 14,265 ft Mt Evans just a few miles to the west. There, nowhere near a house or a trail, someone had placed a wooden lounge chair. Its wood was worn and faded but it was sturdy. I had lunch and a cold drink in my pack. Opportunity knocked and I seized it. Happy Thanksgiving.

Read the article

NoSQL Memcached API for MySQL: Latest Updates

- by Mat Keep

With data volumes exploding, it is vital to be able to ingest and query data at high speed. For this reason, MySQL has implemented NoSQL interfaces directly to the InnoDB and MySQL Cluster (NDB) storage engines, which bypass the SQL layer completely. Without SQL parsing and optimization, Key-Value data can be written directly to MySQL tables up to 9x faster, while maintaining ACID guarantees. In addition, users can continue to run complex queries with SQL across the same data set, providing real-time analytics to the business or anonymizing sensitive data before loading to big data platforms such as Hadoop, while still maintaining all of the advantages of their existing relational database infrastructure. This and more is discussed in the latest Guide to MySQL and NoSQL where you can learn more about using the APIs to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database The native Memcached API is part of the MySQL 5.6 Release Candidate, and is already available in the GA release of MySQL Cluster. By using the ubiquitous Memcached API for writing and reading data, developers can preserve their investments in Memcached infrastructure by re-using existing Memcached clients, while also eliminating the need for application changes. Speed, when combined with flexibility, is essential in the world of growing data volumes and variability. Complementing NoSQL access, support for on-line DDL (Data Definition Language) operations in MySQL 5.6 and MySQL Cluster enables DevOps teams to dynamically update their database schema to accommodate rapidly changing requirements, such as the need to capture additional data generated by their applications. These changes can be made without database downtime. Using the Memcached interface, developers do not need to define a schema at all when using MySQL Cluster. Lets look a little more closely at the Memcached implementations for both InnoDB and MySQL Cluster. Memcached Implementation for InnoDB The Memcached API for InnoDB is previewed as part of the MySQL 5.6 Release Candidate. As illustrated in the following figure, Memcached for InnoDB is implemented via a Memcached daemon plug-in to the mysqld process, with the Memcached protocol mapped to the native InnoDB API. Figure 1: Memcached API Implementation for InnoDB With the Memcached daemon running in the same process space, users get very low latency access to their data while also leveraging the scalability enhancements delivered with InnoDB and a simple deployment and management model. Multiple web / application servers can remotely access the Memcached / InnoDB server to get direct access to a shared data set. With simultaneous SQL access, users can maintain all the advanced functionality offered by InnoDB including support for Foreign Keys, XA transactions and complex JOIN operations. Benchmarks demonstrate that the NoSQL Memcached API for InnoDB delivers up to 9x higher performance than the SQL interface when inserting new key/value pairs, with a single low-end commodity server supporting nearly 70,000 Transactions per Second. Figure 2: Over 9x Faster INSERT Operations The delivered performance demonstrates MySQL with the native Memcached NoSQL interface is well suited for high-speed inserts with the added assurance of transactional guarantees. You can check out the latest Memcached / InnoDB developments and benchmarks here You can learn how to configure the Memcached API for InnoDB here Memcached Implementation for MySQL Cluster Memcached API support for MySQL Cluster was introduced with General Availability (GA) of the 7.2 release, and joins an extensive range of NoSQL interfaces that are already available for MySQL Cluster Like Memcached, MySQL Cluster provides a distributed hash table with in-memory performance. MySQL Cluster extends Memcached functionality by adding support for write-intensive workloads, a full relational model with ACID compliance (including persistence), rich query support, auto-sharding and 99.999% availability, with extensive management and monitoring capabilities. All writes are committed directly to MySQL Cluster, eliminating cache invalidation and the overhead of data consistency checking to ensure complete synchronization between the database and cache. Figure 3: Memcached API Implementation with MySQL Cluster Implementation is simple: 1. The application sends reads and writes to the Memcached process (using the standard Memcached API). 2. This invokes the Memcached Driver for NDB (which is part of the same process) 3. The NDB API is called, providing for very quick access to the data held in MySQL Cluster’s data nodes. The solution has been designed to be very flexible, allowing the application architect to find a configuration that best fits their needs. It is possible to co-locate the Memcached API in either the data nodes or application nodes, or alternatively within a dedicated Memcached layer. The benefit of this flexible approach to deployment is that users can configure behavior on a per-key-prefix basis (through tables in MySQL Cluster) and the application doesn’t have to care – it just uses the Memcached API and relies on the software to store data in the right place(s) and to keep everything synchronized. Using Memcached for Schema-less Data By default, every Key / Value is written to the same table with each Key / Value pair stored in a single row – thus allowing schema-less data storage. Alternatively, the developer can define a key-prefix so that each value is linked to a pre-defined column in a specific table. Of course if the application needs to access the same data through SQL then developers can map key prefixes to existing table columns, enabling Memcached access to schema-structured data already stored in MySQL Cluster. Conclusion Download the Guide to MySQL and NoSQL to learn more about NoSQL APIs and how you can use them to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database See how to build a social app with MySQL Cluster and the Memcached API from our on-demand webinar or take a look at the docs Don't hesitate to use the comments section below for any questions you may have

Read the article

WordPress SEO Plugins to make your Blog Search Engine Friendly

- by Vaibhav

WordPress is the most common blogging system in use today and its use as a CMS is also wide spread. With hundreds of millions of sites using wordpress, getting correct SEO for your WordPress based Blog or Site is very important. We get regular queries from people who want Search Engine Optimisation for their site or blog which is made using wordpress. Here is a list of 16 of the best WordPress Plug-ins That can help you achieve better rankings: All in one SEO Pack This is most popular plugin among all SEO plugins for WordPress. It is easy to use and is compatible with most of the WordPress plugins. It works as a complete package of SEO plugin – automatically generating META tags and optimizing search engines for your titles and avoiding duplicate content. You can also include META tags manually (Met title, Meta description and Met keywords) for all pages and post in your website. HeadSpace2 HeasSpace2 is available in different languages , you can manage a wide range of SEO Tasks related with meta data, you can tag your posts, Custom descriptions and titles. So your page can rank the created relevancy on Search engines and you can load different settings for different pages. Platinum SEO plugin Automatic 301 redirects permalink changes, META tags generation, avoids duplicate content, and does SEO optimization of post and page titles and a lots of other features. TGFI.net SEO WordPress Plugin It’s a modified version of all-in-one SEO Pack. It has some unique feature over All-in-one SEO plugin, It generate titles, meta descriptions and meta keywords automatically when overrides are not present. Google XML Sitemaps Sitemaps Generated by this tool are supported by Google, Yahoo, Bing, and Ask. We all know Sitemaps make indexing of web pages easier for web crawlers. Crawlers can retrieve complete structure of site and more information by sitemaps. They notify all major search engines about new posts every time you create a new post. Sitemap Generator You can generate highly customizable sitemap for your WordPress page. You can choose what to show and what not to show, you can list the items in your choice of orde. It supports pages and permalinks and multi-level categories. SEO Slugs They can generate more search engine friendly URLs for your site. Slugs are filename assigned to your post , this plugin removes all common words like ‘a’, ‘the’, ‘in’, ‘what’, ‘you’ from slug which are assigned automatically to your post. SEO Post Links This is a similar plugin to SEO Slug, it removes unnecessary keywords from slug to make it short and SEO friendly and you can fix the number of characters in your post. Automatic SEO links With this tool you can create auto linking in your post. You can use this tool for inter linking or external linking too. Just select your words, anchor text target URL nature of links ( Do fallow / No follow ). This plugin will replace the matches found in post, WP Backlinks A helpful plugin for link exchange , whenever any webmaster submits a link for link exchange, the plugin will spider webmasters site for reciprocal link, and if everything is found good , your link will be exchanged. SEO Title Tag You can optimize your Title tags of Word press blog through this plugin . You can also override the title tag with custom titles , mass editing and title tags for 404 pages which are the main feature of this plugin. 404 SEO plugin With this Plugin you can customize 404 page of your site; you can give customized error message and links to relevant pages of your site. Redirection A powerful plugins to manage 301 redirection and logs related with redirection, with this plugin you can track 404 errors and track the log of all redirected URLs , this plugin can redirect post automatically when URL changes for that post. AddToAny This plugin helps your readers to share, save, email and bookmark your posts and pages. It supports more than a hundred social bookmarking , networking and sharing sites. SEO Friendly Images You can make SEO friendly images available on your site with the help of this tool. It updates images with proper titles and ALT tags. Robots Meta A plugin which prevents Search engines to index comments on your post, login and admin pages. It also allows to add tags for individual pages.

Search Results

Search found 7672 results on 307 pages for 'compiler optimization'.

Page 257/307 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264 | Next Page >

- by lzap

- by Eric Martin

- by Mattousai

- by Simone Vellei

- by Shantanu Gupta

- by user37136

- by Marco van de Voort

- by zertux

- by Shalin Gajjar

- by jsh

- by Aditi

- by Reed

- by Christie Flanagan

- by nmarun

- by Rick Strahl

- by pinaldave

- by Simon Cooper

- by paxer

- by Mala Narasimharajan

- by Rick Strahl

- by pinaldave

- by Christine Randle

- by Mat Keep

- by Vaibhav

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264 | Next Page >