Search Results

Search found 7217 results on 289 pages for 'nice'.

Page 258/289 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• Check Your Spelling, Grammar, and Style in Firefox and Chrome

  - by Matthew Guay

  Are you tired of making simple writing mistakes that get past your browser’s spell-check?  Here’s how you can get advanced grammar check and more in Firefox and Chrome with After the Deadline. Microsoft Word has spoiled us with grammar, syntax, and spell checking, but the default spell check in Firefox and Chrome still only does basic checks.  Even webapps like Google Docs don’t check more than basic spelling errors.  However, WordPress.com is an exception; it offers advanced spelling, grammar, and syntax checking with its After the Deadline proofing system.  This helps you keep from making embarrassing mistakes on your blog posts, and now, thanks to a couple free browser plugins, it can help you keep from making these mistakes in any website or webapp. After the Deadline in Google Chrome Add the After the Deadline extension (link below) to Chrome as usual. As soon as it’s installed, you’re ready to start improving your online writing.  To check spelling, grammar, and more, click the ABC button that you’ll now see at the bottom of most text boxes online. After a quick scan, grammar mistakes are highlighted in green, complex expressions and other syntax problems are highlighted in blue, and spelling mistakes are highlighted in red as would be expected.  Click on an underlined word to choose one of its recommended changes or ignore the suggestion. Or, if you want more explanation about what was wrong with that word or phrase, click Explain for more info. And, if you forget to run an After the Deadline scan before submitting a text entry, it will automatically check to make sure you still want to submit it.  Click Cancel to go back and check your writing first.   To change the After the Deadline settings, click its icon in the toolbar and select View Options.  Additionally, if you want to disable it on the site you’re on, you can click Disable on this site directly from the popup. From the settings page, you can choose extra things to check for such as double negatives and redundant phrases, as well as add sites and words to ignore. After the Deadline in Firefox Add the After the Deadline add-on to Firefox (link below) as normal. After the Deadline basically the same in Firefox as it does in Chrome.  Select the ABC icon in the lower right corner of textboxes to check them for problems, and After the Deadline will underline the problems as it did in Chrome.  To view a suggested change in Firefox, right-click on the underlined word and select the recommended change or ignore the suggestion. And, if you forget to check, you’ll see a friendly reminder asking if you’re sure you want to submit your text like it is. You can access the After the Deadline settings in Firefox from the menu bar.  Click Tools, then select AtD Preferences.  In Firefox, the settings are in a options dialog with three tabs, but it includes the same options as the Chrome settings page.  Here you can make After the Deadline as correction-happy as you like.   Conclusion The web has increasingly become an interactive place, and seldom does a day go by that we aren’t entering text in forms and comments that may stay online forever.  Even our insignificant tweets are being archived in the Library of Congress.  After the Deadline can help you make sure that your permanent internet record is as grammatically correct as possible.  Even though it doesn’t catch every problem, and even misses some spelling mistakes, it’s still a great help. Links Download the After the Deadline extension for Google Chrome Download the After the Deadline add-on for Firefox Similar Articles Productive Geek Tips Quick Tip: Disable Favicons in FirefoxStupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxHow to Disable the New Geolocation Feature in Google ChromeStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

  Read the article

• Doing unit and integration tests with the Web API HttpClient

  - by cibrax

  One of the nice things about the new HttpClient in System.Net.Http is the support for mocking responses or handling requests in a http server hosted in-memory. While the first option is useful for scenarios in which we want to test our client code in isolation (unit tests for example), the second one enables more complete integration testing scenarios that could include some more components in the stack such as model binders or message handlers for example.   The HttpClient can receive a HttpMessageHandler as argument in one of its constructors. public class HttpClient : HttpMessageInvoker { public HttpClient(); public HttpClient(HttpMessageHandler handler); public HttpClient(HttpMessageHandler handler, bool disposeHandler); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } For the first scenario, you can create a new HttpMessageHandler that fakes the response, which you can use in your unit test. The only requirement is that you somehow inject an HttpClient with this custom handler in the client code. public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } In an unit test, you can do something like this. var fakeResponse = new HttpResponse(); var fakeHandler = new FakeHttpMessageHandler(fakeResponse); var httpClient = new HttpClient(fakeHandler); var customerService = new CustomerService(httpClient); // Do something // Asserts .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } CustomerService in this case is the class under test, and the one that receives an HttpClient initialized with our fake handler. For the second scenario in integration tests, there is a In-Memory host “System.Web.Http.HttpServer” that also derives from HttpMessageHandler and you can use with a HttpClient instance in your test. This has been discussed already in these two great posts from Pedro and Filip. 

  Read the article

• Code Structure / Level Design: Plants vs Zombies game level dissection

  - by lalan

  Hi Friends, I am interested in learning the class structure of Plants vs Zombies, particularly level design; for those who haven't played it - this video contains nice play-through: http://www.youtube.com/watch?v=89DfdOIJ4xw. How would I go ahead and design the code, mostly structure & classes, which allows for maximum flexibility & clean development? I am familiar with data driven design concepts, and would use events to handle most of dynamic behavior. Dissection at macro level: (Once every Level) Load tilemap, props, etc -- basically build the map (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) Show Enemies you'll face during present level (Once every Level) Unit Selection Window/Panel - selection of defensive plants (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) HUD Creation - based on unit selection (Level Loop) Enemy creation - based on types of zombies allowed (Level Loop) Sun/Resource generation (Level Loop) Show messages like 'huge wave of zombies coming', 'final wave' (Level Loop) Other unique events - Spawn gifts, money, tombstones, etc (Once every Level) Unlock new plant Potential game scripts: a) Level definitions: Level_1_1.xml, Level_1_2.xml, etc. Level_1_1.xml :: Sample script <map> <tilemap>tilemapFrontLawn</tilemap> <SpawnPoints> tiles where particular type of zombies (land vs water) may spawn</spawnPoints> <props> position, entity array -- lawnmower, </props> </map> <zombies> <... list of zombies who gonna attack by ids...> </zombies> <plants> <... list by plants which are available for defense by ids...> </plants> <progression> <ZombieWave name='first wave' spawnScript='zombieLightWave.lua' unlock='null'> <startMessages time=1.5>Ready</startMessages> <endMessages time=1.5>Huge wave of zombies incoming</endMessages> </ZombieWave> </progression> b) Entities definitions: .xmls containing zombies, plants, sun, lawnmower, coins, etc description. Potential classes: //LevelManager - Based on the level under play, it will load level script. Few of the // functions it may have: class LevelManager { public: bool load(string levelFileName); bool enter(); bool update(float deltatime); bool exit(); private: LevelData* mLevelData; } // LevelData - Contains the details of level loaded by LevelManager. class LevelData { private: string file; // array of camera,dialog,attackwaves, etc in active level LevelCutSceneCamera** mArrayCutSceneCamera; LevelCutSceneDialog** mArrayCutSceneDialog; LevelAttackWave** mArrayAttackWave; .... // which camera,dialog,attackwave is active in level uint mCursorCutSceneCamera; uint mCursorCutSceneDialog; uint mCursorAttackWave; public: // based on cursor, get the next camera,dialog,attackwave,etc in active level // return false/true based on failure/success bool nextCutSceneCamera(LevelCutSceneCamera**); bool nextCutSceneDialog(LevelCutSceneDialog**); } // LevelUnderPlay- LevelManager class LevelUnderPlay { private: LevelCutSceneCamera* mCutSceneCamera; LevelCutSceneDialog* mCutSceneDialog; LevelAttackWave* mAttackWave; Entities** mSelectedPlants; Entities** mAllowedZombies; bool isCutSceneCameraActive; public: bool enter(); bool update(float deltatime); bool exit(); } I am totally confused.. :( Does it make sense of using class composition (have flat class hierarchy) for managing levels. Is it a good idea to just add/remove/update sprites (or any drawable stuff) to current scene from LevelManager or LevelUnderPlay? If I want to make non-linear level design, how should I go ahead? Perhaps I would need a LevelProgression class, which would decide what to do based on decision tree. Any suggestions would be appreciated very much. Thank for your time, lalan

  Read the article

• [GEEK SCHOOL] Network Security 3: Windows Defender and a Malware-Free System

  - by Ciprian Rusen

  In this second lesson we are going to talk about one of the most confusing security products that are bundled with Windows: Windows Defender. In the past, this product has had a bad reputation and for good reason – it was very limited in its capacity to protect your computer from real-world malware. However, the latest version included in Windows 8.x operating systems is much different than in the past and it provides real protection to its users. The nice thing about Windows Defender in its current incarnation, is that it protects your system from the start, so there are never gaps in coverage. We will start this lesson by explaining what Windows Defender is in Windows 7 and Vista versus what it is in Windows 8, and what product to use if you are using an earlier version. We next will explore how to use Windows Defender, how to improve its default settings, and how to deal with the alerts that it displays. As you will see, Windows Defender will have you using its list of quarantined items a lot more often than other security products. This is why we will explain in detail how to work with it and remove malware for good or restore those items that are only false alarms. Lastly, you will learn how to turn off Windows Defender if you no longer want to use it and you prefer a third-party security product in its place and then how to enable it back, if you have changed your mind about using it. Upon completion, you should have a thorough understanding of your system’s default anti-malware options, or how to protect your system expeditiously. What is Windows Defender? Unfortunately there is no one clear answer to this question because of the confusing way Microsoft has chosen to name its security products. Windows Defender is a different product, depending on the Windows operating system you are using. If you use Windows Vista or Windows 7, then Windows Defender is a security tool that protects your computer from spyware. This but one form of malware made out of tools and applications that monitor your movements on the Internet or the activities you make on your computer. Spyware tends to send the information that is collected to a remote server and it is later used in all kinds of malicious purposes, from displaying advertising you don’t want, to using your personal data, etc. However, there are many other types of malware on the Internet and this version of Windows Defender is not able to protect users from any of them. That’s why, if you are using Windows 7 or earlier, we strongly recommend that you disable Windows Defender and install a more complete security product like Microsoft Security Essentials, or third-party security products from specialized security vendors. If you use Windows 8.x operating systems, then Windows Defender is the same thing as Microsoft Security Essentials: a decent security product that protects your computer in-real time from viruses and spyware. The fact that this product protects your computer also from viruses, not just from spyware, makes a huge difference. If you don’t want to pay for security products, Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) are good alternatives. Windows Defender in Windows 8.x and Microsoft Security Essentials are the same product, only their name is different. In this lesson, we will use the Windows Defender version from Windows 8.x but our instructions apply also to Microsoft Security Essentials (MSE) in Windows 7 and Windows Vista. If you want to download Microsoft Security Essentials and try it out, we recommend you to use this page: Download Microsoft Security Essentials. There you will find both 32-bit and 64-bit editions of this product as well versions in multiple languages. How to Use and Configure Windows Defender Using Windows Defender (MSE) is very easy to use. To start, search for “defender” on the Windows 8.x Start screen and click or tap the “Windows Defender” search result. In Windows 7, search for “security” in the Start Menu search box and click “Microsoft Security Essentials”. Windows Defender has four tabs which give you access to the following tools and options: Home – here you can view the security status of your system. If everything is alright, then it will be colored in green. If there are some warnings to consider, then it will be colored in yellow, and if there are threats that must be dealt with, everything will be colored in red. On the right side of the “Home” tab you will find options for scanning your computer for viruses and spyware. On the bottom of the tab you will find information about when the last scan was performed and what type of scan it was. Update – here you will find information on whether this product is up-to-date. You will learn when it was last updated and the versions of the definitions it is using. You can also trigger a manual update. History – here you can access quarantined items, see which items you’ve allowed to run on your PC even if they were identified as malware by Windows Defender, and view a complete list with all the malicious items Windows Defender has detected on your PC. In order to access all these lists and work with them, you need to be signed in as an administrator. Settings – this is the tab where you can turn on the real-time protection service, exclude files, file types, processes, and locations from its scans as well as access a couple of more advanced settings. The only difference between Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) is that, in the “Settings” tab, Microsoft Security Essentials allows you to set when to run scheduled scans while Windows Defender lacks this option.

  Read the article

• DVD not detected?

  - by Benjamin

  As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

  Read the article

• Querying Visual Studio project files using T-SQL and Powershell

  - by jamiet

  Earlier today I had a need to get some information out of a Visual Studio project file and in this blog post I’m going to share a couple of ways of going about that because I’m pretty sure I won’t be the only person that ever wants to do this. The specific problem I was trying to solve was finding out how many objects in my database project (i.e. in my .dbproj file) had any warnings suppressed but the techniques discussed below will work pretty well for any Visual Studio project file because every such file is simply an XML document, hence it can be queried by anything that can query XML documents. Ever heard the phrase “when all you’ve got is hammer everything looks like a nail”? Well that’s me with querying stuff – if I can write SQL then I’m writing SQL. Here’s a little noddy database project I put together for demo purposes: Two views and a stored procedure, nothing fancy. I suppressed warnings for [View1] & [Procedure1] and hence the pertinent part my project file looks like this:   <ItemGroup>    <Build Include="Schema Objects\Schemas\dbo\Views\View1.view.sql">      <SubType>Code</SubType>      <SuppressWarnings>4151,3276</SuppressWarnings>    </Build>    <Build Include="Schema Objects\Schemas\dbo\Views\View2.view.sql">      <SubType>Code</SubType>    </Build>    <Build Include="Schema Objects\Schemas\dbo\Programmability\Stored Procedures\Procedure1.proc.sql">      <SubType>Code</SubType>      <SuppressWarnings>4151</SuppressWarnings>    </Build>  </ItemGroup>  <ItemGroup> Note the <SuppressWarnings> elements – those are the bits of information that I am after. With a lot of help from folks on the SQL Server XML forum  I came up with the following query that nailed what I was after. It reads the contents of the .dbproj file into a variable of type XML and then shreds it using T-SQL’s XML data type methods: DECLARE @xml XML; SELECT @xml = CAST(pkgblob.BulkColumn AS XML) FROM   OPENROWSET(BULK 'C:\temp\QueryingProjectFileDemo\QueryingProjectFileDemo.dbproj' -- <-Change this path!                    ,single_blob) AS pkgblob                    ;WITH XMLNAMESPACES( 'http://schemas.microsoft.com/developer/msbuild/2003' AS ns) SELECT  REVERSE(SUBSTRING(REVERSE(ObjectPath),0,CHARINDEX('\',REVERSE(ObjectPath)))) AS [ObjectName]        ,[SuppressedWarnings] FROM   (        SELECT  build.query('.') AS [_node]        ,       build.value('ns:SuppressWarnings[1]','nvarchar(100)') AS [SuppressedWarnings]        ,       build.value('@Include','nvarchar(1000)') AS [ObjectPath]        FROM    @xml.nodes('//ns:Build[ns:SuppressWarnings]') AS R(build)        )q And here’s the output: And that’s it – an easy way of discovering which warnings have been suppressed and for which objects in your database projects. I won’t bother going over the code as it is fairly self-explanatory – peruse it at your leisure.   Once I had the SQL above I figured I’d share it around a little in case it was ever useful to anyone else; hence I’m writing this blog post and I also posted it on the Visual Studio Database Development Tools forum at FYI: Discover which objects have had warnings suppressed. Luckily Kevin Goode saw the thread and he posted a different solution to the same problem, one that uses Powershell. The advantage of Kevin’s Powershell approach is that it is easy to analyse many .dbproj files at the same time. Below is Kevin’s code which I have tweaked ever so slightly so that it produces the same results as my SQL script (I just want any object that had had a warning suppressed whereas Kevin was querying specifically for warning 4151):   cd 'C:\Temp\QueryingProjectFileDemo\' cls $projects = ls -r -i *.dbproj Foreach($project in $projects) { $xml = new-object System.Xml.XmlDocument $xml.set_PreserveWhiteSpace( $true ) $xml.Load($project) #$xpath = @{Start="/e:Project/e:ItemGroup/e:Build[e:SuppressWarnings=4151]/@Include"} #$xpath = @{Start="/e:Project/e:ItemGroup/e:Build[contains(e:SuppressWarnings,'4151')]/@Include"} $xpath = @{Start="/e:Project/e:ItemGroup/e:Build[e:SuppressWarnings]/@Include"} $ns = @{ e = "http://schemas.microsoft.com/developer/msbuild/2003" } $xml | Select-Xml -XPath $xpath.Start -Namespace $ns |Select -Expand Node | Select -expand Value } and here’s the output: Nice reusable Powershell and SQL scripts – not bad for an evening’s work. Thank you to Kevin for allowing me to share his code. Don’t forget that these techniques can easily be adapted to query any Visual Studio project file, they’re only XML documents after all! Doubtless many people out there already have code for doing this but nonetheless here is another offering to the great script library in the sky. Have fun! @Jamiet

  Read the article

• Frameskipping in Android gameloop causing choppy sprites (Open GL ES 2.0)

  - by user22241

  I have written a simple 2d platform game for Android and am wondering how one deals with frame-skipping? Are there any alternatives? Let me explain further. So, my game loop allows for the rendering to be skipped if game updates and rendering do not fit into my fixed time-slice (16.667ms). This allows my game to run at identically perceived speeds on different devices. And this works great, things do run at the same speed. However, when the gameloop skips a render call for even one frame, the sprite glitches. And thinking about it, why wouldn't it? You're seeing a sprite move say, an average of 10 pixels every 1.6 seconds, then suddenly, there is a pause of 3.2ms, and the sprite then appears to jump 20 pixels. When this happens 3 or 4 times in close succession, the result is very ugly and not something I want in my game. Therfore, my question is how does one deal with these 'pauses' and 'jumps' - I've read every article on game loops I can find (see below) and my loops are even based off of code from these articles. The articles specifically mention frame skipping but they don't make any reference to how to deal with visual glitches that result from it. I've attempted various game-loops. My loop must have a mechanism in-place to allow rendering to be skipped to keep game-speed constant across multiple devices (or alternative, if one exists) I've tried interpolation but this doesn't eliminate this specific problem (although it looks like it may mitigate the issue slightly as when it eventually draws the sprite it 'moves it back' between the old and current positions so the 'jump' isn't so big. I've also tried a form of extrapolation which does seem to keep things smooth considerably, but I find it to be next to completely useless because it plays havoc with my collision detection (even when drawing with a 'display only' coordinate - see extrapolation-breaks-collision-detection) I've tried a loop that uses Thread.sleep when drawing / updating completes with time left over, no frame skipping in this one, again fairly smooth, but runs differently on different devices so no good. And I've tried spawning my own, third thread for logic updates, but this, was extremely messy to deal with and the performance really wasn't good. (upon reading tons of forums, most people seem to agree a 2 thread loops ( so UI and GL threads) is safer / easier). Now if I remove frame skipping, then all seems to run nice and smooth, with or without inter/extrapolation. However, this isn't an option because the game then runs at different speeds on different devices as it falls behind from not being able to render fast enough. I'm running logic at 60 Ticks per second and rendering as fast as I can. I've read, as far as I can see every article out there, I've tried the loops from My Secret Garden and Fix your timestep. I've also read: Against the grain deWITTERS Game Loop Plus various other articles on Game-loops. A lot of the others are derived from the above articles or just copied word for word. These are all great, but they don't touch on the issues I'm experiencing. I really have tried everything I can think of over the course of a year to eliminate these glitches to no avail, so any and all help would be appreciated. A couple of examples of my game loops (Code follows): From My Secret Room public void onDrawFrame(GL10 gl) { //Rre-set loop back to 0 to start counting again loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip) { SceneManager.getInstance().getCurrentScene().updateLogic(); nextGameTick += skipTicks; timeCorrection += (1000d / ticksPerSecond) % 1; nextGameTick += timeCorrection; timeCorrection %= 1; loops++; } extrapolation = (float)(System.currentTimeMillis() + skipTicks - nextGameTick) / (float)skipTicks; render(extrapolation); } And from Fix your timestep double t = 0.0; double dt2 = 0.01; double currentTime = System.currentTimeMillis()*0.001; double accumulator = 0.0; double newTime; double frameTime; @Override public void onDrawFrame(GL10 gl) { newTime = System.currentTimeMillis()*0.001; frameTime = newTime - currentTime; if ( frameTime > (dt*5)) //Allow 5 'skips' frameTime = (dt*5); currentTime = newTime; accumulator += frameTime; while ( accumulator >= dt ) { SceneManager.getInstance().getCurrentScene().updateLogic(); previousState = currentState; accumulator -= dt; } interpolation = (float) (accumulator / dt); render(interpolation); }

  Read the article

• Switching the layout in Orchard CMS

  - by Bertrand Le Roy

  The UI composition in Orchard is extremely flexible, thanks in no small part to the usage of dynamic Clay shapes. Every notable UI construct in Orchard is built as a shape that other parts of the system can then party on and modify any way they want. Case in point today: modifying the layout (which is a shape) on the fly to provide custom page structures for different parts of the site. This might actually end up being built-in Orchard 1.0 but for the moment it’s not in there. Plus, it’s quite interesting to see how it’s done. We are going to build a little extension that allows for specialized layouts in addition to the default layout.cshtml that Orchard understands out of the box. The extension will add the possibility to add the module name (or, in MVC terms, area name) to the template name, or module and controller names, or module, controller and action names. For example, the home page is served by the HomePage module, so with this extension you’ll be able to add an optional layout-homepage.cshtml file to your theme to specialize the look of the home page while leaving all other pages using the regular layout.cshtml. I decided to implement this sample as a theme with code. This way, the new overrides are only enabled as the theme is activated, which makes a lot of sense as this is going to be where you’ll be creating those additional layouts. The first thing I did was to create my own theme, derived from the default TheThemeMachine with this command: codegen theme CustomLayoutMachine /CreateProject:true /IncludeInSolution:true /BasedOn:TheThemeMachine .csharpcode, .csharpcode pre { font-size: 12px; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Once that was done, I worked around a known bug and moved the new project from the Modules solution folder into Themes (the code was already physically in the right place, this is just about Visual Studio editing). The CreateProject flag in the command-line created a project file for us in the theme’s folder. This is only necessary if you want to run code outside of views from that theme. The code that we want to add is the following LayoutFilter.cs: using System.Linq; using System.Web.Mvc; using System.Web.Routing; using Orchard; using Orchard.Mvc.Filters; namespace CustomLayoutMachine.Filters { public class LayoutFilter : FilterProvider, IResultFilter { private readonly IWorkContextAccessor _wca; public LayoutFilter(IWorkContextAccessor wca) { _wca = wca; } public void OnResultExecuting(ResultExecutingContext filterContext) { var workContext = _wca.GetContext(); var routeValues = filterContext.RouteData.Values; workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area")); workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area", "controller")); workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area", "controller", "action")); } public void OnResultExecuted(ResultExecutedContext filterContext) { } private static string BuildShapeName( RouteValueDictionary values, params string[] names) { return "Layout__" + string.Join("__", names.Select(s => ((string)values[s] ?? "").Replace(".", "_"))); } } } This filter is intercepting ResultExecuting, which is going to provide a context object out of which we can extract the route data. We are also injecting an IWorkContextAccessor dependency that will give us access to the current Layout object, so that we can add alternate shape names to its metadata. We are adding three possible shape names to the default, with different combinations of area, controller and action names. For example, a request to a blog post is going to be routed to the “Orchard.Blogs” module’s “BlogPost” controller’s “Item” action. Our filters will then add the following shape names to the default “Layout”: Layout__Orchard_Blogs Layout__Orchard_Blogs__BlogPost Layout__Orchard_Blogs__BlogPost__Item Those template names get mapped into the following file names by the system (assuming the Razor view engine): Layout-Orchard_Blogs.cshtml Layout-Orchard_Blogs-BlogPost.cshtml Layout-Orchard_Blogs-BlogPost-Item.cshtml This works for any module/controller/action of course, but in the sample I created Layout-HomePage.cshtml (a specific layout for the home page), Layout-Orchard_Blogs.cshtml (a layout for all the blog views) and Layout-Orchard_Blogs-BlogPost-Item.cshtml (a layout that is specific to blog posts). Of course, this is just an example, and this kind of dynamic extension of shapes that you didn’t even create in the first place is highly encouraged in Orchard. You don’t have to do it from a filter, we only did it this way because that was a good place where we could get the context that we needed. And of course, you can base your alternate shape names on something completely different from route values if you want. For example, you might want to create your own part that modifies the layout for a specific content item, or you might want to do it based on the raw URL (like it’s done in widget rules) or who knows what crazy custom rule. The point of all this is to show that extending or modifying shapes is easy, and the layout just happens to be a shape. In other words, you can do whatever you want. Ain’t that nice? The custom theme can be found here: Orchard.Theme.CustomLayoutMachine.1.0.nupkg Many thanks to Louis, who showed me how to do this.

  Read the article

• Write your Tests in RSpec with IronRuby

  - by kazimanzurrashid

  [Note: This is not a continuation of my previous post, treat it as an experiment out in the wild. ] Lets consider the following class, a fictitious Fund Transfer Service: public class FundTransferService : IFundTransferService { private readonly ICurrencyConvertionService currencyConvertionService; public FundTransferService(ICurrencyConvertionService currencyConvertionService) { this.currencyConvertionService = currencyConvertionService; } public void Transfer(Account fromAccount, Account toAccount, decimal amount) { decimal convertionRate = currencyConvertionService.GetConvertionRate(fromAccount.Currency, toAccount.Currency); decimal convertedAmount = convertionRate * amount; fromAccount.Withdraw(amount); toAccount.Deposit(convertedAmount); } } public class Account { public Account(string currency, decimal balance) { Currency = currency; Balance = balance; } public string Currency { get; private set; } public decimal Balance { get; private set; } public void Deposit(decimal amount) { Balance += amount; } public void Withdraw(decimal amount) { Balance -= amount; } } We can write the spec with MSpec + Moq like the following: public class When_fund_is_transferred { const decimal ConvertionRate = 1.029m; const decimal TransferAmount = 10.0m; const decimal InitialBalance = 100.0m; static Account fromAccount; static Account toAccount; static FundTransferService fundTransferService; Establish context = () => { fromAccount = new Account("USD", InitialBalance); toAccount = new Account("CAD", InitialBalance); var currencyConvertionService = new Moq.Mock<ICurrencyConvertionService>(); currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); fundTransferService = new FundTransferService(currencyConvertionService.Object); }; Because of = () => { fundTransferService.Transfer(fromAccount, toAccount, TransferAmount); }; It should_decrease_from_account_balance = () => { fromAccount.Balance.ShouldBeLessThan(InitialBalance); }; It should_increase_to_account_balance = () => { toAccount.Balance.ShouldBeGreaterThan(InitialBalance); }; } and if you run the spec it will give you a nice little output like the following: When fund is transferred » should decrease from account balance » should increase to account balance 2 passed, 0 failed, 0 skipped, took 1.14 seconds (MSpec). Now, lets see how we can write exact spec in RSpec. require File.dirname(__FILE__) + "/../FundTransfer/bin/Debug/FundTransfer" require "spec" require "caricature" describe "When fund is transferred" do Convertion_Rate = 1.029 Transfer_Amount = 10.0 Initial_Balance = 100.0 before(:all) do @from_account = FundTransfer::Account.new("USD", Initial_Balance) @to_account = FundTransfer::Account.new("CAD", Initial_Balance) currency_convertion_service = Caricature::Isolation.for(FundTransfer::ICurrencyConvertionService) currency_convertion_service.when_receiving(:get_convertion_rate).with(:any, :any).return(Convertion_Rate) fund_transfer_service = FundTransfer::FundTransferService.new(currency_convertion_service) fund_transfer_service.transfer(@from_account, @to_account, Transfer_Amount) end it "should decrease from account balance" do @from_account.balance.should be < Initial_Balance end it "should increase to account balance" do @to_account.balance.should be > Initial_Balance end end I think the above code is self explanatory, treat the require(line 1- 4) statements as the add reference of our visual studio projects, we are adding all the required libraries with this statement. Next, the describe which is a RSpec keyword. The before does exactly the same as NUnit's Setup or MsTest’s TestInitialize attribute, but in the above we are using before(:all) which acts as ClassInitialize of MsTest, that means it will be executed only once before all the test methods. In the before(:all) we are first instantiating the from and to accounts, it is same as creating with the full name (including namespace)  like fromAccount = new FundTransfer.Account(.., ..), next, we are creating a mock object of ICurrencyConvertionService, check that for creating the mock we are not using the Moq like the MSpec version. This is somewhat an interesting issue of IronRuby or maybe the DLR, it seems that it is not possible to use the lambda expression that most of the mocking tools uses in arrange phase in Iron Ruby, like: currencyConvertionService.Setup(ccv => ccv.GetConvertionRate(Moq.It.IsAny<string>(), Moq.It.IsAny<string>())).Returns(ConvertionRate); But the good news is, there is already an excellent mocking tool called Caricature written completely in IronRuby which we can use to mock the .NET classes. May be all the mocking tool providers should give some thought to add the support for the DLR, so that we can use the tool that we are already familiar with. I think the rest of the code is too simple, so I am skipping the explanation. Now, the last thing, how we are going to run it with RSpec, lets first install the required gems. Open you command prompt and type the following: igem sources -a http://gems.github.com This will add the GitHub as gem source. Next type: igem install uuidtools caricature rspec and at last we have to create a batch file so that we can execute it in the Notepad++, create a batch like in the IronRuby bin directory like my previous post and put the following in that batch file: @echo off cls call spec %1 --format specdoc pause Next, add a run menu and shortcut in the Notepad++ like my previous post. Now when we run it it will show the following output: When fund is transferred - should decrease from account balance - should increase to account balance Finished in 0.332042 seconds 2 examples, 0 failures Press any key to continue . . . You will complete code of this post in the bottom. That's it for today. Download: RSpecIntegration.zip

  Read the article

• Forcing an External Activation with Service Broker

  - by Davide Mauri

  In these last days I’ve been working quite a lot with Service Broker, a technology I’m really happy to work with, since it can give a lot of satisfaction. The scale-out solution one can easily build is simply astonishing. I’m helping a company to build a very scalable and – yet almost inexpensive – invoicing system that has to be able to scale out using commodity hardware. To offload the work from the main server to satellite “compute nodes” (yes, I’ve borrowed this term from PDW) we’re using Service Broker and the External Activator application available in the SQL Server Feature Pack. For those who are not used to work with SSB, the External Activation is a feature that allows you to intercept the arrival of a message in a queue right from your application code. http://msdn.microsoft.com/en-us/library/ms171617.aspx (Look for “Event-Based Activation”) In order to make life even more easier, Microsoft released the External Activation application that saves you even from writing even this code. http://blogs.msdn.com/b/sql_service_broker/archive/tags/external+activator/ The External Activator application can be configured to execute your own application so that each time a message – an invoice in my case – arrives in the target queue, the invoking application is executed and the invoice is calculated. The very nice feature of External Activator is that it can automatically execute as many configured application in order to process as many messages as your system can handle.  This also a lot of create a scale-out solution, leaving to the developer only a fraction of the problems that usually came with asynchronous programming. Developers are also shielded from Service Broker since everything can be encapsulated in Stored Procedures, so that – for them – developing such scale-out asynchronous solution is not much more complex than just executing a bunch of Stored Procedures. Now, if everything works correctly, you don’t have to bother of anything else. You put messages in the queue and your application, invoked by the External Activator, process them. But what happen if for some reason your application fails to process the messages. For examples, it crashes? The message is safe in the queue so you just need to process it again. But your application is invoked by the External Activator application, so now the question is, how do you wake up that app? Service Broker will engage the activation process only if certain conditions are met: http://msdn.microsoft.com/en-us/library/ms171601.aspx But how we can invoke the activation process manually, without having to wait for another message to arrive (the arrival of a new message is a condition that can fire the activation process)? The “trick” is to do manually with the activation process does: sending a system message to a queue in charge of handling External Activation messages: declare @conversationHandle uniqueidentifier; declare @n xml = N' <EVENT_INSTANCE>   <EventType>QUEUE_ACTIVATION</EventType>   <PostTime>' + CONVERT(CHAR(24),GETDATE(),126) + '</PostTime>   <SPID>' + CAST(@@SPID AS VARCHAR(9)) + '</SPID>   <ServerName>[your_server_name]</ServerName>   <LoginName>[your_login_name]</LoginName>   <UserName>[your_user_name]</UserName>   <DatabaseName>[your_database_name]</DatabaseName>   <SchemaName>[your_queue_schema_name]</SchemaName>   <ObjectName>[your_queue_name]</ObjectName>   <ObjectType>QUEUE</ObjectType> </EVENT_INSTANCE>' begin dialog conversation     @conversationHandle from service        [<your_initiator_service_name>] to service          '<your_event_notification_service>' on contract         [http://schemas.microsoft.com/SQL/Notifications/PostEventNotification] with     encryption = off,     lifetime = 6000 ; send on conversation     @conversationHandle message type     [http://schemas.microsoft.com/SQL/Notifications/EventNotification] (@n) ;     end conversation @conversationHandle; That’s it! Put the code in a Stored Procedure and you can add to your application a button that says “Force Queue Processing” (or something similar) in order to start the activation process whenever you need it (which should not occur too frequently but it may happen). PS I know that the “fire-and-forget” (ending the conversation without waiting for an answer) technique is not a best practice, but in this case I don’t see how it can hurts so I decided to stay very close to the KISS principle []

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• Token based Authentication for WCF HTTP/REST Services: Authentication

  - by Your DisplayName here!

  This post shows some of the implementation techniques for adding token and claims based security to HTTP/REST services written with WCF. For the theoretical background, see my previous post. Disclaimer The framework I am using/building here is not the only possible approach to tackle the problem. Based on customer feedback and requirements the code has gone through several iterations to a point where we think it is ready to handle most of the situations. Goals and requirements The framework should be able to handle typical scenarios like username/password based authentication, as well as token based authentication The framework should allow adding new supported token types Should work with WCF web programming model either self-host or IIS hosted Service code can rely on an IClaimsPrincipal on Thread.CurrentPrincipal that describes the client using claims-based identity Implementation overview In WCF the main extensibility point for this kind of security work is the ServiceAuthorizationManager. It gets invoked early enough in the pipeline, has access to the HTTP protocol details of the incoming request and can set Thread.CurrentPrincipal. The job of the SAM is simple: Check the Authorization header of the incoming HTTP request Check if a “registered” token (more on that later) is present If yes, validate the token using a security token handler, create the claims principal (including claims transformation) and set Thread.CurrentPrincipal If no, set an anonymous principal on Thread.CurrentPrincipal. By default, anonymous principals are denied access – so the request ends here with a 401 (more on that later). To wire up the custom authorization manager you need a custom service host – which in turn needs a custom service host factory. The full object model looks like this: Token handling A nice piece of existing WIF infrastructure are security token handlers. Their job is to serialize a received security token into a CLR representation, validate the token and turn the token into claims. The way this works with WS-Security based services is that WIF passes the name/namespace of the incoming token to WIF’s security token handler collection. This in turn finds out which token handler can deal with the token and returns the right instances. For HTTP based services we can do something very similar. The scheme on the Authorization header gives the service a hint how to deal with an incoming token. So the only missing link is a way to associate a token handler (or multiple token handlers) with a scheme and we are (almost) done. WIF already includes token handler for a variety of tokens like username/password or SAML 1.1/2.0. The accompanying sample has a implementation for a Simple Web Token (SWT) token handler, and as soon as JSON Web Token are ready, simply adding a corresponding token handler will add support for this token type, too. All supported schemes/token types are organized in a WebSecurityTokenHandlerCollectionManager and passed into the host factory/host/authorization manager. Adding support for basic authentication against a membership provider would e.g. look like this (in global.asax): var manager = new WebSecurityTokenHandlerCollectionManager(); manager.AddBasicAuthenticationHandler((username, password) => Membership.ValidateUser(username, password));   Adding support for Simple Web Tokens with a scheme of Bearer (the current OAuth2 scheme) requires passing in a issuer, audience and signature verification key: manager.AddSimpleWebTokenHandler(     "Bearer",     "http://identityserver.thinktecture.com/trust/initial",     "https://roadie/webservicesecurity/rest/",     "WFD7i8XRHsrUPEdwSisdHoHy08W3lM16Bk6SCT8ht6A="); In some situations, SAML token may be used as well. The following configures SAML support for a token coming from ADFS2: var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri("https://roadie/webservicesecurity/rest/")); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from config) adfsConfig.ServiceTokenResolver = IdentityModelConfiguration.ServiceConfiguration.CreateAggregateTokenResolver();             manager.AddSaml11SecurityTokenHandler("SAML", adfsConfig);   Transformation The custom authorization manager will also try to invoke a configured claims authentication manager. This means that the standard WIF claims transformation logic can be used here as well. And even better, can be also shared with e.g. a “surrounding” web application. Error handling A WCF error handler takes care of turning “access denied” faults into 401 status codes and a message inspector adds the registered authentication schemes to the outgoing WWW-Authenticate header when a 401 occurs. The next post will conclude with authorization as well as the source code download.   (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• Bring Office 2003 Menus Back to 2010 with UBitMenu

  - by Matthew Guay

  Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

  Read the article

• Oracle Social Network Developer Challenge Winners

  - by kellsey.ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. Now that OpenWorld 2012 has wrapped, I have time to tell you all about what happened. Maybe you recall that Noel (@noelportugal) and I were running a modified hackathon during the show, the Oracle Social Network Developer Challenge. Without further ado, congratulations to Dimitri Gielis (@dgielis) and Martin Giffy D’Souza (@martindsouza) on their winning entry, an integration between Oracle APEX and Oracle Social Network that integrates feedback and bug submission with Oracle Social Network Conversations, allowing developers, end-users and project leaders to view and discuss the feedback on their APEX applications from within Oracle Social Network. Update: Bob Rhubart of OTN (@brhubart) interviewed Dimitri and Martin right after their big win. Money quote from Dimitri when asked what he’d buy with the $500 in Amazon gift cards, “Oracle Social Network.” Nice one. In their own words: In the developers perspective it’s important to get feedback soon, so after a first iteration and end-users start to test, they can give feedback of the application. Previously it stopped there, and it was up to the developer to communicate further with email, phone etc. With OSN every feedback and communication gets logged and other people can see the discussion immediately as well. For the end users perspective he can now communicate in a more efficient way to not only the developers, but also between themselves. Maybe many end-users (in different locations) would like to change some behaviour, by using OSN they can see the entry somebody put in with a screenshot and they can just start to chat about it. Some key technical end users can have lighten the tasks of the development team by looking at the feedback first and start to communicate with their peers. For the project manager he has now the ability to really see what communication has taken place in certain areas and can make decisions on that. Later, if things come up again, he can always go back in OSN and see what was said at that moment in time. Integrating OSN in the APEX applications enhances the user experience, makes the lives of the developers easier and gives a better overview to project managers. Incidentally, you may already know Dimitri and Martin, since both are Oracle Ace Directors. I ran into Martin at the Ace Director briefings Friday before the conference started, and at that point, he wasn’t sure he’d have time to enter the Challenge. After some coaxing, he and Dimitri agreed to give it a go and banged out their entry on Tuesday night, or more accurately, very early Wednesday morning, the day of the Challenge judging. I think they said it took them about four hours of hardcore coding to get it done, very much like a traditional hackathon, which is essentially a code sprint from idea to finished product. Here are some screenshots of the workflow they built. #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } I love this idea, i.e. closing the loop between web developers and users, a very common pain point, and so did our judges. Speaking of, special thanks to our panel of three judges: Reggie Bradford (@reggiebradford), serial entrepreneur, founder of Vitrue and SVP of Cloud Product Development at Oracle Robert Hipps (@roberthipps), VP of Development for Oracle Social Network and my former boss Roland Smart (@rsmartx), VP of Social Marketing and the brains behind the Oracle Social Developer Community Finally, thanks to everyone who made this possible, including: The three other teams from HarQen (@harqen), TEAM Informatics (@teaminformatics) and Fishbowl Solutions (@fishbowle20) featuring Friend of the ‘Lab John Sim (@jrsim_uix), who finished and presented entries. I’ll be posting the details of their work this week. The one guy who finished an entry, but couldn’t make the judging, Bex Huff (@bex). Bex rallied from a hospitalization due to an allergic reaction during the show; he’s fine, don’t worry. I’ll post details of his work next week, too. The 40-plus people who registered to compete in the Challenge. Noel for all his hard work, sample code, and flying monkey target, more on that to come. The Oracle Social Network development team for supporting this event. Everyone in legal and the beta program office for their help. And finally, the Oracle Technology Network (@oracletechnet) for hosting the event and providing countless hours of operational and moral support. Sorry if I’ve missed some people, since this was a huge team effort. This event was a big success, and we plan to do similar events in the future. Stay tuned to this channel for more. 

  Read the article

• Reflections on GiveCamp

  - by Reed

  I participated in the Seattle GiveCamp over the weekend, and am entirely impressed.  GiveCamp is a great event – I especially like how rewarding it is for everybody involved.  I strongly encourage any and all developers to watch for future GiveCamp events, and consider participating, for many reasons… GiveCamp provides real value to organizations that truly need help.  The Seattle event alone succeeded in helping sixteen non-profit organizations in many different ways.  The projects involved varied dramatically, including website redesigns, SEO, reworking data management workflows, and even game development.  Many non-profits have a strong need for good, quality technical help.  However, nearly every non-profit organization has an incredibly limited budget.  GiveCamp is a way to really give back, and provide incredibly valuable help to organizations that truly benefit. My experience has shown many developers to be incredibly generous – this is a chance to dedicate your energy to helping others in a way that really takes advantage of your expertise.  Your time as a developer is incredibly valuable, and this puts something of incredible value directly into the hands of places its needed. First, and foremost, GiveCamp is about providing technical help to non-profit organizations in need. GiveCamp can make you a better developer.  This is a fantastic opportunity for us, as developers, to work with new people, in a new setting.  The incredibly short time frame (one weekend for a deliverable project) and intense motivation to succeed provides a huge opportunity for learning from peers.  I’d personally like to thank off the developers with whom I worked – I learned something from each and every one of you.  I hope to see and work with all of you again someday. GiveCamp provides an opportunity for you to work outside of your comfort zone. While it’s always nice to be an expert, it’s also valuable to work on a project where you have little or no direct experience.  My team focused on a complete reworking of our organizations message and a complete new website redesign and deployment using WordPress.  While I’d used WordPress for my blog, and had some experience, this is completely unrelated to my professional work.  In fact, nobody on our team normally worked directly with the technologies involved – yet together we managed to succeed in delivering our goals.  As developers, it’s easy to want to stay abreast of new technology surrounding our expertise, but its rare that we get a chance to sit down and work on something practical that is completely outside of our normal realm of work.  I’m a desktop developer by trade, and spent much of the weekend working with CSS and Photoshop.  Many of the projects organizations need don’t match perfectly with the skill set in the room – yet all of the software professionals rose to the occasion and delivered practical, usable applications. GiveCamp is a short term, known commitment. While this seems obvious, I think it’s an important aspect to remember.  This is a huge part of what makes it successful – you can work, completely focused, on a project, then walk away completely when you’re done.  There is no expectation of continued involvement.  While many of the professionals I’ve talked to are willing to contribute some amount of their time beyond the camp, this is not expected. The freedom this provides is immense.  In addition, the motivation this brings is incredibly valuable.  Every developer in the room was very focused on delivering in time – you have one shot to get it as good as possible, and leave it with the organization in a way that can be maintained by them.  This is a rare experience – and excellent practice at time management for everyone involved. GiveCamp provides a great way to meet and network with your peers. Not only do you get to network with other software professionals in your area – you get to network with amazing people.  Every single person in the room is there to try to help people.  The balance of altruism, intelligence, and expertise in the room is something I’ve never before experienced. During the presentations of what was accomplished, I felt blessed to participate.  I know many people in the room were incredibly touched by the level of dedication and accomplishment over the weekend. GiveCamp is fun. At the end of the experience, I would have signed up again, even if it was a painful, tedious weekend – merely due to the amazing accomplishments achieved throughout the event.  However, the event is fun.  Everybody I talked to, the entire weekend, was having a good time.  While there were many faces focused into a near grimace at times (including mine, I’ll admit), this was always in response to a particularly challenging problem or task.  The challenges just added to the overall enjoyment of the weekend – part of why I became a developer in the first place is my love for challenge and puzzles, and a short deadline using unfamiliar technology provided plenty of opportunity for puzzles.  As soon as people would stand up, it was another smile.   If you’re a developer, I’d recommend looking at GiveCamp more closely.  Watch for an event in your area.  If there isn’t one, consider building a team and organizing an event.  The experience is worth the commitment. 

  Read the article

• Creating Rich View Components in ASP.NET MVC

  - by kazimanzurrashid

  One of the nice thing of our Telerik Extensions for ASP.NET MVC is, it gives you an excellent extensible platform to create rich view components. In this post, I will show you a tiny but very powerful ListView Component. Those who are familiar with the Webforms ListView component already knows that it has the support to define different parts of the component, we will have the same kind of support in our view component. Before showing you the markup, let me show you the screenshots first, lets say you want to show the customers of Northwind database as a pagable business card style (Yes the example is inspired from our RadControls Suite) And here is the markup of the above view component. <h2>Customers</h2> <% Html.Telerik() .ListView(Model) .Name("customers") .PrefixUrlParameters(false) .BeginLayout(pager => {%> <table border="0" cellpadding="3" cellspacing="1"> <tfoot> <tr> <td colspan="3" class="t-footer"> <% pager.Render(); %> </td> </tr> </tfoot> <tbody> <tr> <%}) .BeginGroup(() => {%> <td> <%}) .Item(item => {%> <fieldset style="border:1px solid #e0e0e0"> <legend><strong>Company Name</strong>:<%= Html.Encode(item.DataItem.CompanyName) %></legend> <div> <div style="float:left;width:120px"> <img alt="<%= item.DataItem.CustomerID %>" src="<%= Url.Content("~/Content/Images/Customers/" + item.DataItem.CustomerID + ".jpg") %>"/> </div> <div style="float:right"> <ul style="list-style:none none;padding:10px;margin:0"> <li> <strong>Contact Name:</strong> <%= Html.Encode(item.DataItem.ContactName) %> </li> <li> <strong>Title:</strong> <%= Html.Encode(item.DataItem.ContactTitle) %> </li> <li> <strong>City:</strong> <%= Html.Encode(item.DataItem.City)%> </li> <li> <strong>Country:</strong> <%= Html.Encode(item.DataItem.Country)%> </li> <li> <strong>Phone:</strong> <%= Html.Encode(item.DataItem.Phone)%> </li> <li> <div style="float:right"> <%= Html.ActionLink("Edit", "Edit", new { id = item.DataItem.CustomerID }) %> <%= Html.ActionLink("Delete", "Delete", new { id = item.DataItem.CustomerID })%> </div> </li> </ul> </div> </div> </fieldset> <%}) .EmptyItem(() =>{%> <fieldset style="border:1px solid #e0e0e0"> <legend>Empty</legend> </fieldset> <%}) .EndGroup(() => {%> </td> <%}) .EndLayout(pager => {%> </tr> </tbody> </table> <%}) .GroupItemCount(3) .PageSize(6) .Pager<NumericPager>(pager => pager.ShowFirstLast()) .Render(); %> As you can see that you have the complete control on the final angel brackets and like the webform’s version you also can define the templates. You can also use this component to show Master/Detail data, for example the customers and its order like the following: I am attaching the complete source code along with the above examples for your review, what do you think, how about creating some component with our extensions? Download: MvcListView.zip

  Read the article

• BizTalk 2009 - Installing BizTalk Server 2009 on XP for Development

  - by StuartBrierley

  At my previous employer, when developing for BizTalk Server 2004 using Visual Studio 2003, we made use of separate development and deployment environments; developing in Visual Studio on our client PCs and then deploying to a seperate shared BizTalk 2004 Server from there.  This server was part of a multi-server Standard BizTalk environment comprising of separate BizTalk Server 2004 and SQL Server 2000 servers.  This environment was implemented a number of years ago by an outside consulting company, and while it worked it did occasionally cause contention issues with three developers deploying to the same server to carry out unit testing! Now that I am making the design and implementation decisions about the environment that BizTalk will be developed in and deployed to, I have chosen to create a single "server" installation on my development PC, installling SQL Server 2008, Visual Studio 2008 and BizTalk Server 2009 on a single system.  The client PC in use is actually a MacBook Pro running Windows XP; not the most powerful of systems for high volume processing but it should be powerful enough to allow development and initial unit testing to take place. I did not need to, and so chose not to, install all of the components detailed in the Microsoft guide for installing BizTalk 2009 on Windows XP but I did follow the basics of the procedures detailed within.  Outlined below are the highlights of this process and any details of what choices I made.   Install IIS I had previsouly installed Windows XP, including all current service packs and critical updates.  At the time of installation this included Service Pack 3, the .Net Framework 3.5 and MS Windows Installer 3.1.  Having a running XP system, my first step was to install IIS - this is quite straightforward and posed no difficulties. Install Visual Studio 2008 The next step for me was to install Visual Studio 2008.  Making sure to select a custom installation is crucial at this point, as you need to make sure that you deselect SQL Server 2005 Express Edition as it can cause the BizTalk installation to fail.  The installation guide suggests that you only select Visual C# when selecting features to install, but  I decided that due to some legacy systems I have code for that I would also select the VB and ASP options. Visual Studio 2008 Service Pack 1 Following the completion of the installation of Visual Studio itself you should then install the Visual Studio 2008 Service Pack 1. SQL Server 2008 Standard Edition The next step before intalling BizTalk Server 2009 itself is to install SQL Server 2008 Standard Edition. On the feature selection screen make sure that you select the follwoing options: Database Engine Services SQL Server Replication Full-Text Search Analysis Services Reporting Services Business Intelligence Development Studio Client Tools Connectivity Integration Services Management Tools Basic and Complete Use the default instance and the same accounts for all SQL server instances - in my case I used the Network Service and Local Service accounts for the two sets of accounts. On the database engine configuration screen I selected windows authentication and added the current user, adding the same user again on the Analysis services Configuration screen.  All other screens were left on the default settings. The SQL Server 2008 installation also included the installation of hotfix for XP KB942288-v3, the Windows Installer 4.5 Redistributable. System Configuration At this stage I took a moment to disable the SQL Server shared memory protocol and enable the Named Pipes and TCP/IP protocols.  These can be found in the SQL Server Configuration Manager > SQL Server Network Configuration > Protocols for MSSQLServer.  I also made sure that the DTC settings were configured correctley.   BizTalk Server 2009 The penultimate step is to install BizTalk Server 2009 Standard Edition. I had previsouly downloaded the redistributable prerequisites as a CAB file so was able to make use of this when carrying out the installation. When selecting which components to install I selected: Server Runtime BizTalk EDI/AS2 Runtime WCF Adapter Runtime Portal Components Administrative Tools WFC Administartion Tools Developer Tools and SDK, Enterprise SSO Administration Module Enterprise SSO Master Secret Server Business Rules Components BAM Alert Provider BAM Client BAM Eventing Once installation has completed clear the launch BizTalk Server Configuration check box and select finish. Verify the Installation Before configuring BizTalk Server it is a good idea to check that BizTalk Server 2009 is installed and that SQL Server 2008 has started correctly.  The easiest way to verify the BizTalk installation is check the Programs and Features in Control panel.  Check that SQL is started by looking in the SQL Server Configuration Manager. Configure BizTalk Server 2009 Finally we are ready to configure BizTalk Server 2009.  To start this I opted for a custom configuration that allowed me to choose in more detail the settings to be used. For all databases I selected the local server and default database names. For all Accounts I used a local account that had been created specifically for the BizTalk Services. For all windows groups I allowed the configuration wizard to create the default local groups. The configuration wizard then ran:   Upon completion you will be presented with a screen detailing the success or failure of the configuration.  If your configuration failed you will need to sort out the issues and try again (it is possible to save the configuration settings for later use if you want too - except passwords of course!).  If you see lots of nice green ticks - congratulations BizTalk Server 2009 on XP is now installed and configured ready for development.

  Read the article

• Is Linear Tape File System (LTFS) Best For Transportable Storage?

  - by rickramsey

  Those of us in tape storage engineering take a lot of pride in what we do, but understand that tape is the right answer to a storage problem only some of the time. And, unfortunately for a storage medium with such a long history, it has built up a few preconceived notions that are no longer valid. When I hear customers debate whether to implement tape vs. disk, one of the common strikes against tape is its perceived lack of usability. If you could go back a few generations of corporate acquisitions, you would discover that StorageTek engineers recognized this problem and started developing a solution where a tape drive could look just like a memory stick to a user. The goal was to not have to care about where files were on the cartridge, but to simply see the list of files that were on the tape, and click on them to open them up. Eventually, our friends in tape over at IBM built upon our work at StorageTek and Sun Microsystems and released the Linear Tape File System (LTFS) feature for the current LTO5 generation of tape drives as an open specification. LTFS is really a wonderful feature and we’re proud to have taken part in its beginnings and, as you’ll soon read, its future. Today we offer LTFS-Open Edition, which is free for you to use in your in Oracle Enterprise Linux 5.5 environment - not only on your LTO5 drives, but also on your Oracle StorageTek T10000C drives. You can download it free from Oracle and try it out. LTFS does exactly what its forefathers imagined. Now you can see immediately which files are on a cartridge. LTFS does this by splitting a cartridge into two partitions. The first holds all of the necessary metadata to create a directory structure for you to easily view the contents of the cartridge. The second partition holds all of the files themselves. When tape media is loaded onto a drive, a complete file system image is presented to the user. Adding files to a cartridge can be as simple as a drag-and-drop just as you do today on your laptop when transferring files from your hard drive to a thumb drive or with standard POSIX file operations. You may be thinking all of this sounds nice, but asking, “when will I actually use it?” As I mentioned at the beginning, tape is not the right solution all of the time. However, if you ever need to physically move data between locations, tape storage with LTFS should be your most cost-effective and reliable answer. I will give you a few use cases examples of when LTFS can be utilized. Media and Entertainment (M&E), Oil and Gas (O&G), and other industries have a strong need for their storage to be transportable. For example, an O&G company hunting for new oil deposits in remote locations takes very large underground seismic images which need to be shipped back to a central data center. M&E operations conduct similar activities when shooting video for productions. M&E companies also often transfers files to third-parties for editing and other activities. These companies have three highly flawed options for transporting data: electronic transfer, disk storage transport, or tape storage transport. The first option, electronic transfer, is impractical because of the expense of the bandwidth required to transfer multi-terabyte files reliably and efficiently. If there’s one place that has bandwidth, it’s your local post office so many companies revert to physically shipping storage media. Typically, M&E companies rely on transporting disk storage between sites even though it, too, is expensive. Tape storage should be the preferred format because as IDC points out, “Tape is more suitable for physical transportation of large amounts of data as it is less vulnerable to mechanical damage during transportation compared with disk" (See note 1, below). However, tape storage has not been used in the past because of the restrictions created by proprietary formats. A tape may only be readable if both the sender and receiver have the same proprietary application used to write the file. In addition, the workflows may be slowed by the need to read the entire tape cartridge during recall. LTFS solves both of these problems, clearing the way for tape to become the standard platform for transferring large files. LTFS is open and, as long as you’ve downloaded the free reader from our website or that of anyone in the LTO consortium, you can read the data. So if a movie studio ships a scene to a third-party partner to add, for example, sounds effects or a music score, it doesn’t have to care what technology the third-party has. If it’s written back to an LTFS-formatted tape cartridge, it can be read. Some tape vendors like to claim LTFS is a “standard,” but beauty is in the eye of the beholder. It’s a specification at this point, not a standard. That said, we’re already seeing application vendors create functionality to write in an LTFS format based on the specification. And it’s my belief that both customers and the tape storage industry will see the most benefit if we all follow the same path. As such, we have volunteered to lead the way in making LTFS a standard first with the Storage Network Industry Association (SNIA), and eventually through to standard bodies such as American National Standards Institute (ANSI). Expect to hear good news soon about our efforts. So, if storage transportability is one of your requirements, I recommend giving LTFS a look. It makes tape much more user-friendly and it’s free, which allows tape to maintain all of its cost advantages over disk! Note 1 - IDC Report. April, 2011. “IDC’s Archival Storage Solutions Taxonomy, 2011” - Brian Zents Website Newsletter Facebook Twitter

  Read the article

• Vacations on Rodrigues 2014

  And now something completely different compared to the usual technical or community related articles here on this blog. Yes, this time I'm writing some lines on my (and my family's) activities during our long weekend stay on Rodrigues. So, please bear with me, it's eventually a bit more personal... Grab a soda, some popcorn and a cosy place to continue to read. var googleAlbumLink = "https://plus.google.com/photos/117698191428446859536/albums/6047895311458281985"; //optional----------------------- var mySlideWidth = 580; var mySlideHeight = 340; var mySlideDelay = 7000; //delay in milliseconds Special promotions during school holidays Originally, our children started to ask more frequently about going on the plane again. Obviously, after their aunty from Germany was around during May, they were really eager to travel again. So, we decided that it might be a great opportunity to book some vacations during their school holidays. And just in time the local hotels and hotel groups started to advertise their special promotions for citizens and residents. After collecting multiple brochures over several days, we got attracted by various hotel packages on Rodrigues - most interestingly the expenses for the stay and flight ticket were less compared to other resorts here on the main island. As we have been to Rodrigues already back in 2008, we followed up on this idea and got in touch with a couple travel agencies. Well, I have to report that you should be really careful about the promotions from some of them. We had a very negative experience with Shamal Travel Agency in Quatre Bornes regarding their adverts and the actual price levels and age definition for children. Please, stay away from them if you are interested in transparent cost and services. Anyway, after some arrangements with two other close families we managed to confirm our stay at the Cotton Bay Hotel in Rodrigues. Given the fact that we already stayed there, and the hotel has been renovated recently, and it is under new management all looked very promising and relaxed for our vacation. Counting the days... As we already booked in July our children were counting down the days. And it got more interesting as soon as they were on school holidays finally. Well, the day arrived and waking them up at 2:30 hrs wasn't a problem after all. Quite the opposite it was fascinating for us parents to watch them waiting for the transport and later on during the airport transfer. Despite the early hours both didn't fall asleep and it was all so exciting. We are taking the plane! Well organised by the Cotton Bay Hotel Honestly, it was a breeze and a smooth ride during our stay at the hotel. From the airport transfer, the cleanliness of our bungalow, the organisation of our day trips, and the SPA - all very well and enjoyable. The children had great fun, and although it was a bit too windy to plunge into the pool they had a lot of fun with other activities on the beach and at the Kid's Club. Oh, and we had our private petting zoo with cows, sheep and goats just close to the terrace. Some of us went to check out the SPA facilities and I have to admit that the services regarding Hammam and Sauna are better than at some other hotels in Mauritius. I don't know after how many months or years I was once again enjoying a very hot sauna. Little draw-back but nothing to worry about... There is no cold water or at least ice cubes to cool down the body, but hey there was a nice breeze coming over the hills. Some day trips to mention Based on a friend's recommendation we walked to a "restaurant" called Chez Solange & Robert. Hahaha, restaurant is widely stretched in this case, as we enjoyed a great BBQ with fresh lobster, whole fish, and pieces of chicken breast in an open cottage. Just some wooden structure covered with dried palm leaves on the roof - island feeling pure! The other day we went to the Giant Tortoise & Cave Reserve Francois Leguat to observe the giant Aldabra turtles and to visit the Grande Caverne. The biggest limestone cave on the island. Compared to our last visit this was a novelty after checking out the Caverne Partate. The formations of stalactites and stalagmites are very impressive and imaginative. Our guide had lots of funny terms and despite the low light conditions the kids had a great time wandering around on the narrow wooden paths and stairs. And last but not least, we decided to check out the Tyrodrig zip lines... Everyone was allowed to join the trip through the air, and our little ones stayed close to our field guides. But finally went on their own on the very last traversal. Puuuh, it was astounishing to glide over the valley, and for sure something to repeat next time. Impressions of our vacation on Rodrigues 2014   Next stay has been discussed already Oh yes, Rodrigues baby! We are going to come again! Tentative dates have been discussed already and now it's up to us to earn enough our next holiday on that wonderful remote piece of paradise. Eventually, a little bit longer than this time. We'll see...

  Read the article

• Dynamically switching the theme in Orchard

  - by Bertrand Le Roy

  It may sound a little puzzling at first, but in Orchard CMS, more than one theme can be active at any given time. The reason for that is that we have an extensibility point that allows a module (or a theme) to participate in the choice of the theme to use, for each request. The motivation for building the theme engine this way was to enable developers to switch themes based on arbitrary criteria, such as user preferences or the user agent (if you want to serve a mobile theme for phones for example). The choice is made between the active themes, which is why there is a difference between the default theme and the active themes. In order to have a say in the choice of the theme, all you have to do is implement IThemeSelector. That interface is quite simple as it only has one method, GetTheme, that takes the current RequestContext and returns a ThemeSelectorResult or null if the implementation of the interface does not want to participate in the current request (we'll see an example in a moment). ThemeSelectorResult itself is just a ThemeName string property and an integer Priority. We're using a priority so that an arbitrary number of implementations of IThemeSelector can contribute to the choice of a theme. If you look for existing implementations of the interface in Orchard, you'll find four: AdminThemeSelector: selects the TheAdmin theme with a very high priority (100) if the current request is for a page that is part of the admin. Otherwise, null is returned, which enables other implementations to choose the theme. PreviewThemeSelector: selects the preview theme if there is one, with a high priority (90), and null otherwise. This enables administrators to view the site under a different theme while everybody else continues to see the current default theme. SiteThemeSelector: this is the implementation that is doing what you expect most of the time, which is to get the current theme from site settings and set it with a priority of –5. SafeModeThemeSelector: this is the fallback implementation, which should almost never win. It sets the theme as the safe mode theme, which has no style and just uses the default templates for everything. The priority is very low (-100). While this extensibility mechanism is great to have, I wanted to bring that level of choice into the hands of the site administrator rather than just developers. In order to achieve that, I built the Vandelay Theme Picker module. The module provides administration UI to create rules for theme selection. It provides its own extensibility point (the IThemeSelectionRule interface) and one implementation of a rule: UserAgentThemeSelectorRule. This rule gets the current user agent from the context and tries to match it with a regular expression that the administrator can configure in the admin UI. You can for example configure a rule with a regular expression that matches IE6 and serve a different subtheme where the stylesheet has been tweaked for such an antique browser. Another possible configuration is to detect mobile devices from their agent string and serve the mobile theme. All those operations can be done with this module entirely from the admin UI, without writing a line of code. The module also offers the administrator the opportunity to inject a link into the front-end in a specific zone and with a specific position that enables the user to switch to the default theme if he wishes to. This is especially useful for sites that use a mobile theme but still want to allow users to use the full desktop site. While the module is nice and flexible, it may be overkill. On my own personal blog, I have only two active themes: the desktop theme and the mobile theme. I'm fine with going into code to change the criteria on which to switch the theme, so I'm not using my own Theme Picker module. Instead, I made the mobile theme a theme with code (in other words there is a csproj file in the theme). The project includes a single C# file, my MobileThemeSelector for which the code is the following: public class MobileThemeSelector : IThemeSelector { private static readonly Regex _Msie678 = new Regex(@"^Mozilla\/4\.0 \(compatible; MSIE [678]" + @"\.0; Windows NT \d\.\d(.*)\)$", RegexOptions.IgnoreCase); private ThemeSelectorResult _requestCache; private bool _requestCached; public ThemeSelectorResult GetTheme(RequestContext context) { if (_requestCached) return _requestCache; _requestCached = true; var userAgent = context.HttpContext.Request.UserAgent; if (userAgent.IndexOf("phone", StringComparison.OrdinalIgnoreCase) != -1 || _Msie678.IsMatch(userAgent) || userAgent.IndexOf("windows live writer", StringComparison.OrdinalIgnoreCase) != -1) { _requestCache = new ThemeSelectorResult { Priority = 10, ThemeName = "VuLuMobile" }; } return _requestCache; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The theme selector selects the current theme for Internet Explorer versions 6 to 8, for phones, and for Windows Live Writer (so that the theme that is used when I write posts is as simple as possible). What's interesting here is that it's the theme that selects itself here, based on its own criteria. This should give you a good panorama of what's possible in terms of dynamic theme selection in Orchard. I hope you find some fun uses for it. As usual, I can't wait to see what you're going to come up with…

  Read the article

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• Surface and the Uphill Battle to Win Over iPad Users (Namely: Me)

  - by D'Arcy Lussier

  I went away this past weekend and decided to bring along the Windows 8 tablet from the Build conference last year – y’know, to give Windows 8 a try in a typical scenario. I also brought our iPad 2 along since I figured my wife would want to use that. I’d love to tell you how I found using my Windows 8 tablet but I can’t – I used the iPad exclusively the entire weekend. It was during this that I realized what Microsoft needs to do to win me over as an iPad user. As you’ll see, I’m left wondering what it is that Surface is meant to compete with: iPad and other tablets, or thin laptops like the MacBook Air or Ultrabooks. Device Size I really like the size of the iPad compared with the Build tablet. It’s not as long and the thinness/weight of the device makes it feel more like you’re holding a magazine than a computer. I’m pleased that Microsoft will be matching the thinness of the iPad with Surface, but I’m suspect as to what that actually means. The iPad’s edges slant inwards where the Surface has a thicker boxish look (similar to the iPhone 4S). So while they may have the same depth at the deepest part of both devices, I bet the iPad will come off feeling thinner. However, its not lost on me the number of external port options the Surface’s design provides over the iPad (Usb, etc.). With that said, I haven’t missed having a USB slot on my iPad. I’m not a fan of lengthening the Surface screen size to almost a full inch over the iPad, mainly because… Vertical Orientation Experience Did you notice at the announce event, in the images of the devices that have been released, and in any marketing for it, that the surface is always displayed in horizontal orientation. This is a huge beef I have with my Build tablet and why I prefer the iPad. Yes the iPad can do the wide-screenish mode, but the iPad is oriented to be vertical by nature. Don’t agree? Look at the button and camera placement – both on the shorter sides of the device. Compare that with the Surface, where the orientation for the button and camera is on the longer sides. To be fair, Blackberry and the horde of Android tablets out there haven’t gotten this either – since most monitors are widescreen nowadays tablets should be too right? Wrong. Widescreen is great for certain things, but tasks such as reading is not one of them – hence why monitor companies like Dell provide stands that allow you to flip your widescreen monitor to a vertical orientation. That Microsoft has chosen a horizontal orientation by default for Windows 8 is disappointing – hopefully hardware manufacturers will be given the option of a default vertical orientation. Fast Startup Time I like that I can turn off/turn on the iPad very quickly. Even from a true “off” mode and not just sleeping, the iPad boots up very quickly. Windows RT needs to have that same quick response. If I start finding that I’m waiting for the device to boot up for more than 30 seconds that could be a show stopper. No Heat I really hate that the Build tablet has fans that kick in to cool the procs, but its basically a slate computer and I get its part of that prototype build. For Surface, it needs to be the same type of experience as the iPad – no heat! I know Surface doesn’t have fans and uses some cool new vent system or something like that, but even then – I want to sit and read a book on my Surface without having to feel any heat coming from the device, which is the experience I have with the iPad now. What About Apps?! I am definitely not the target client when it comes to app stores. On my iPad I use: Safari Kindle Reader Twitter App Settlers of Catan TSN’s App And that’s it. So really, while its nice that some version of Office might be available, I’m not planning on utilizing a Surface for creating a PowerPoint or working on a Word document – that’s what my laptop is for. I want my tablet to be for information snacking or as an e-reader and occasionally an entertainment device. Surface vs iPad or Surface vs Air? The more that I read up on Surface, the more I wonder if it won’t be a touch-enabled MacBook Air competitor more than an iPad one. Also, I really question if Microsoft gets tablets – when one of your main selling features is a built-in physical keyboard it speaks more to a traditional laptop experience than a tablet one that’s entirely reliant on touch. Still, I really love the Windows Phone interface – way more than iOS – so I’m still very optimistic that the Metro experience on the tablet will be fantastic. I just worry that Microsoft has interpreted a tablet as a computer with a removable keyboard and a touch screen, and that’s not what tablet computing is about at all.

  Read the article

• So you want a French Site?

  - by juanlarios

  I thought I would write a quick write up of how to create a french site in SharePoint 2007. I'm not talking about a Variation but just a plain French Site from the ground up. There were some gotchas that I felt were worth blogging about. First:  go to Microsoft Telnet Article and follow the install instructions. Make sure that when you get to the download page that you select "French" as part of the drop down and you download and install the right language pack. I noticed that if you did not click the "change" button enven though I selected the 'french' language pack, it reverted back to the english language pack.   Second: You will notice a couple of things. When you go to central admin you will see the following:    Now you can pick between french site or english. You will get this if you install other language packs and they will be listed in the drop down. You will notice that you now have french headings and frech listings of sites. You see "Publishing" as a heading because I have a custom site definition that I deployed as a french site. Third: As you start navigating around and trying to create document libraries or sites you will start getting errors. Errors like the following: "Cannot make a cache safe URL for "SelectorControls.js", file not found. Please verify that the file exists under the layouts directory. " Troubleshoot issues with Windows SharePoint Services. Once you resolve the issue with this "js" file, you will find that there are other js files that are missing. The only problem is that if you are not fluent in French or the language you are trying to deploy, Well, you'll have a tough time understanding error messages as they will all be in the new language you are trying to deploy. So let's just talk about what happened when you installed the language pack. In the 12 Hive:  12/Template    you will now see a 1033 folder and a 1036 folder. The 1036 folder is the folder that was created and added as part of the language pack. What the above error is saying is that now that it's looking at the 1036 folder, well, it's missing some files. The nice thing is that these files are included in the 1033 folder (which is the English Language Pack). Simply copy and paste the controls from the one folder to the other. There will be more than one conflict so you will have to move serveral controls over. Can't remember how many but simply add them as error messages come up. I had to add some navigation controls and some content selectors.   Now that's all that you need to install the Frech Language pack anc reate site collections that are entirely in a another language. Do not mistake this with Variations, where you can have multiple language sites. For those of you doing a little bit extra with this, let me share what I was doing extra and what I needed to get it working for me. I had had a custom site definition which was obviously not showing up in my selection of french sites. I was under the impression that all sites in English would show up in french and that the sites were simply routed to a new Resource file for french content. And that is the case but there is a little extra that needs to be done if you have a custom site definition deployed:  First: Under hive 12/Template/1033/XML  there is a listing of site definition files that are deployed to the English side of things. If you navigate to 12/Template/1036/XML  and open one of the site definitions you will see that they are similar and reference the existing site definitions installed on the server, except that they have some french added to descriptions and names. Simply copy the xml file of your custom template to the 1036 folder to have it show up as a selection when you select French as the dropdown entry when create a site colleciton. You can go ahead and change the description and name to suit the language it's under.    Second: As part of my site definition, I packaed up several list templates, that were saved as STP files. When you navigate to the list template listing, well, the templates are for English sites, not French so I cannot create document libraries based on the template. What now? well here comes KWIzCom to the rescue! They seem to have put out a "STP language converter" where you can take a site template or list template and convert it to any target language you are after. It's a free download, Use it and you're good to go.  One thing I will mention is that when I convereted the English documents I whent ahead and converted them to French-Canadien. And it didn't work! so I finally figured out that the French Version it was expecting in the french site was "French-France". Don't know why that is, it's just what needs to be done to get that working. When I did that, I was able to use the List templates that I created in the English site for the French Site.   Hope it helps , good luck!

  Read the article

• A Custom View Engine with Dynamic View Location

  - by imran_ku07

      Introduction:          One of the nice feature of ASP.NET MVC framework is its pluggability. This means you can completely replace the default view engine(s) with a custom one. One of the reason for using a custom view engine is to change the default views location and sometimes you need to change the views location at run-time. For doing this, you can extend the default view engine(s) and then change the default views location variables at run-time.  But, you cannot directly change the default views location variables at run-time because they are static and shared among all requests. In this article, I will show you how you can dynamically change the views location without changing the default views location variables at run-time.       Description:           Let's say you need to synchronize the views location with controller name and controller namespace. So, instead of searching to the default views location(Views/ControllerName/ViewName) to locate views, this(these) custom view engine(s) will search in the Views/ControllerNameSpace/ControllerName/ViewName folder to locate views.           First of all create a sample ASP.NET MVC 3 application and then add these custom view engines to your application,   public class MyRazorViewEngine : RazorViewEngine { public MyRazorViewEngine() : base() { AreaViewLocationFormats = new[] { "~/Areas/{2}/Views/%1/{1}/{0}.cshtml", "~/Areas/{2}/Views/%1/{1}/{0}.vbhtml", "~/Areas/{2}/Views/%1/Shared/{0}.cshtml", "~/Areas/{2}/Views/%1/Shared/{0}.vbhtml" }; AreaMasterLocationFormats = new[] { "~/Areas/{2}/Views/%1/{1}/{0}.cshtml", "~/Areas/{2}/Views/%1/{1}/{0}.vbhtml", "~/Areas/{2}/Views/%1/Shared/{0}.cshtml", "~/Areas/{2}/Views/%1/Shared/{0}.vbhtml" }; AreaPartialViewLocationFormats = new[] { "~/Areas/{2}/Views/%1/{1}/{0}.cshtml", "~/Areas/{2}/Views/%1/{1}/{0}.vbhtml", "~/Areas/{2}/Views/%1/Shared/{0}.cshtml", "~/Areas/{2}/Views/%1/Shared/{0}.vbhtml" }; ViewLocationFormats = new[] { "~/Views/%1/{1}/{0}.cshtml", "~/Views/%1/{1}/{0}.vbhtml", "~/Views/%1/Shared/{0}.cshtml", "~/Views/%1/Shared/{0}.vbhtml" }; MasterLocationFormats = new[] { "~/Views/%1/{1}/{0}.cshtml", "~/Views/%1/{1}/{0}.vbhtml", "~/Views/%1/Shared/{0}.cshtml", "~/Views/%1/Shared/{0}.vbhtml" }; PartialViewLocationFormats = new[] { "~/Views/%1/{1}/{0}.cshtml", "~/Views/%1/{1}/{0}.vbhtml", "~/Views/%1/Shared/{0}.cshtml", "~/Views/%1/Shared/{0}.vbhtml" }; } protected override IView CreatePartialView(ControllerContext controllerContext, string partialPath) { var nameSpace = controllerContext.Controller.GetType().Namespace; return base.CreatePartialView(controllerContext, partialPath.Replace("%1", nameSpace)); } protected override IView CreateView(ControllerContext controllerContext, string viewPath, string masterPath) { var nameSpace = controllerContext.Controller.GetType().Namespace; return base.CreateView(controllerContext, viewPath.Replace("%1", nameSpace), masterPath.Replace("%1", nameSpace)); } protected override bool FileExists(ControllerContext controllerContext, string virtualPath) { var nameSpace = controllerContext.Controller.GetType().Namespace; return base.FileExists(controllerContext, virtualPath.Replace("%1", nameSpace)); } } public class MyWebFormViewEngine : WebFormViewEngine { public MyWebFormViewEngine() : base() { MasterLocationFormats = new[] { "~/Views/%1/{1}/{0}.master", "~/Views/%1/Shared/{0}.master" }; AreaMasterLocationFormats = new[] { "~/Areas/{2}/Views/%1/{1}/{0}.master", "~/Areas/{2}/Views/%1/Shared/{0}.master", }; ViewLocationFormats = new[] { "~/Views/%1/{1}/{0}.aspx", "~/Views/%1/{1}/{0}.ascx", "~/Views/%1/Shared/{0}.aspx", "~/Views/%1/Shared/{0}.ascx" }; AreaViewLocationFormats = new[] { "~/Areas/{2}/Views/%1/{1}/{0}.aspx", "~/Areas/{2}/Views/%1/{1}/{0}.ascx", "~/Areas/{2}/Views/%1/Shared/{0}.aspx", "~/Areas/{2}/Views/%1/Shared/{0}.ascx", }; PartialViewLocationFormats = ViewLocationFormats; AreaPartialViewLocationFormats = AreaViewLocationFormats; } protected override IView CreatePartialView(ControllerContext controllerContext, string partialPath) { var nameSpace = controllerContext.Controller.GetType().Namespace; return base.CreatePartialView(controllerContext, partialPath.Replace("%1", nameSpace)); } protected override IView CreateView(ControllerContext controllerContext, string viewPath, string masterPath) { var nameSpace = controllerContext.Controller.GetType().Namespace; return base.CreateView(controllerContext, viewPath.Replace("%1", nameSpace), masterPath.Replace("%1", nameSpace)); } protected override bool FileExists(ControllerContext controllerContext, string virtualPath) { var nameSpace = controllerContext.Controller.GetType().Namespace; return base.FileExists(controllerContext, virtualPath.Replace("%1", nameSpace)); } }             Here, I am extending the RazorViewEngine and WebFormViewEngine class and then appending /%1 in each views location variable, so that we can replace /%1 at run-time. I am also overriding the FileExists, CreateView and CreatePartialView methods. In each of these method implementation, I am replacing /%1 with controller namespace. Now, just register these view engines in Application_Start method in Global.asax.cs file,   protected void Application_Start() { ViewEngines.Engines.Clear(); ViewEngines.Engines.Add(new MyRazorViewEngine()); ViewEngines.Engines.Add(new MyWebFormViewEngine()); ................................................ ................................................ }             Now just create a controller and put this controller's view inside Views/ControllerNameSpace/ControllerName folder and then run this application. You will find that everything works just fine.       Summary:          ASP.NET MVC uses convention over configuration to locate views. For many applications this convention to locate views is acceptable. But sometimes you may need to locate views at run-time. In this article, I showed you how you can dynamically locate your views by using a custom view engine. I am also attaching a sample application. Hopefully you will enjoy this article too. SyntaxHighlighter.all()  

  Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >