Search Results

Search found 8042 results on 322 pages for 'days'.

Page 259/322 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

  • What is the benefit of using ONLY OpenID authentication on a site?

    - by Peter
    From my experience with OpenID, I see a number of significant downsides: Adds a Single Point of Failure to the site It is not a failure that can be fixed by the site even if detected. If the OpenID provider is down for three days, what recourse does the site have to allow its users to login and access the information they own? Takes a user to another sites content and every time they logon to your site Even if the OpenID provider does not have an error, the user is re-directed to their site to login. The login page has content and links. So there is a chance a user will actually be drawn away from the site to go down the Internet rabbit hole. Why would I want to send my users to another company's website? [ Note: my provider no longer does this and seems to have fixed this problem (for now).] Adds a non-trivial amount of time to the signup To sign up with the site a new user is forced to read a new standard, chose a provider, and signup. Standards are something that the technical people should agree to in order to make a user experience frictionless. They are not something that should be thrust on the users. It is a Phisher's Dream OpenID is incredibly insecure and stealing the person's ID as they log in is trivially easy. [ taken from David Arno's Answer below ] For all of the downside, the one upside is to allow users to have fewer logins on the Internet. If a site has opt-in for OpenID then users who want that feature can use it. What I would like to understand is: What benefit does a site get for making OpenID mandatory?

    Read the article

  • How to detect a gamepad button press on OSX 10.5 and higher?

    - by Steph Thirion
    How do I detect a button press on a USB gamepad on OSX 10.5 and higher? I can't wrap my head around the ridiculously complex HID Manager (even though apparently it was simplified with 10.5), and the code samples at Apple have thousands of lines of code that would take days to understand and isolate what I need, so I'd appreciate if someone posts a simple, and fully coded solution for this isolated problem. EDIT: so far all answers are links to source code or semi obscure libraries for all kinds of HID devices, which will require more research time than what I'd like to invest on this. I am starting a bounty to get an actual snippet of code that solves this simple problem (using an external library or not). EDIT POS BOUNTY: thanks to all for you help; but unfortunately the answer that has been automatically selected by the system is not working for me, can't figure out why; and the author has not yet replied to my comments. Any insight would be appreciated, but until a fix is found, anyone looking for resources on this topic should take this answer with a pinch of salt.

    Read the article

  • Software Company Library

    - by dbemerlin
    Hi. A few days ago i had the idea to create a company library since my company has no training and many developers still develop as they did when they learned it 5 years ago. My hope is that they can lend books, read them and hopefully learn something from them (for example: object oriented programming or unit testing, which noone here knows how to use). After asking around most agreed that it was a good idea, so i brought my books, made a simple printed sheet with "Book A belongs to B" and "Developer A took the Book on dd.mm.yyyy" to get it started. Now i want to get some ideas for Books that i could add to the shelf (sadly from my own money since 100€/month for training is too much money for this multi-million euro company). We develop mostly PHP & MySQL so books specific to this topic would be preferred but i think if people learn other languages they might get ideas on how to develop better with the current language so other books are ok, too. Which books would you recommend? PS: Personally i'd like to add some Project Management books, too, as it's a topic i'm interested in, eventhough i'm just a junior developer (We've got Peopleware already, great book btw).

    Read the article

  • PyQt QAbstractListModel seems to ignore tristate flags

    - by mcieslak
    I've been trying for a couple days to figure out why my QAbstractLisModel won't allow a user to toggle a checkable item in three states. The model returns the Qt.IsTristate and Qt.ItemIsUserCheckable in the flags() method, but when the program runs only Qt.Checked and Qt.Unchecked are toggled on edit. class cboxModel(QtCore.QAbstractListModel): def __init__(self, parent=None): super(cboxModel, self).__init__(parent) self.cboxes = [ ['a',0], ['b',1], ['c',2], ['d',0] ] def rowCount(self,index=QtCore.QModelIndex()): return len(self.cboxes) def data(self,index,role): if not index.isValid: return QtCore.QVariant() myname,mystate = self.cboxes[index.row()] if role == QtCore.Qt.DisplayRole: return QtCore.QVariant(myname) if role == QtCore.Qt.CheckStateRole: if mystate == 0: return QtCore.QVariant(QtCore.Qt.Unchecked) elif mystate == 1: return QtCore.QVariant(QtCore.Qt.PartiallyChecked) elif mystate == 2: return QtCore.QVariant(QtCore.Qt.Checked) return QtCore.QVariant() def setData(self,index,value,role=QtCore.Qt.EditRole): if index.isValid(): self.cboxes[index.row()][1] = value.toInt()[0] self.emit(QtCore.SIGNAL("dataChanged(QModelIndex,QModelIndex)"), index, index) print self.cboxes return True return False def flags(self,index): if not index.isValid(): return QtCore.Qt.ItemIsEditable return QtCore.Qt.ItemIsEnabled | QtCore.Qt.ItemIsEditable | QtCore.Qt.ItemIsUserCheckable | QtCore.Qt.ItemIsTristate You can test it with this, class MainForm(QtGui.QMainWindow): def __init__(self, parent=None): super(MainForm, self).__init__(parent) model = cboxModel(self) self.view = QtGui.QListView() self.view.setModel(model) self.setCentralWidget(self.view) app = QtGui.QApplication(sys.argv) form = MainForm() form.show() app.exec_() and see that only 2 states are available. I'm assuming there's something simple I'm missing. Any ideas? Thanks!

    Read the article

  • Working with datetime type in Quickbooks My Time files

    - by jakemcgraw
    I'm attempting to process Quickbooks My Time imt files using PHP. The imt file is a plaintext XML file. I've been able to use the PHP SimpleXML library with no issues but one: The numeric representations of datetime in the My Time XML files is something I've never seen before: <object type="TIMEPERIOD" id="z128"> <attribute name="notes" type="string"></attribute> <attribute name="start" type="date">308073428.00000000000000000000</attribute> <attribute name="running" type="bool">0</attribute> <attribute name="duration" type="double">3600</attribute> <attribute name="datesubmitted" type="date">310526237.59616601467132568359</attribute> <relationship name="activity" type="1/1" destination="ACTIVITY" idrefs="z130"></relationship> </object> You can see that attritube[@name='start'] has a value of: 308073428.00000000000000000000 This is not Excel based method of storage 308,073,428 is too many days since 1900-01-00 and it isn't Unix Epoch either. So, my question is, has anyone ever seen this type of datetime representation?

    Read the article

  • Get the last checked checkboxes...

    - by Sara
    Hi everyone, I'm not sure how to accomplish this issue which has been confusing me for a few days. I have a form that updates a user record in MySQL when a checkbox is checked. Now, this is how my form does this: if (isset($_POST['Update'])) { $paymentr = $_POST['paymentr']; //put checkboxes array into variable $paymentr2 = implode(', ', $paymentr); //implode array for mysql $query = "UPDATE transactions SET paymentreceived=NULL"; $result = mysql_query($query); $query = "UPDATE transactions SET paymentdate='0000-00-00'"; $result = mysql_query($query); $query = "UPDATE transactions SET paymentreceived='Yes' WHERE id IN ($paymentr2)"; $result = mysql_query($query); $query = "UPDATE transactions SET paymentdate=NOW() WHERE id IN ($paymentr2)"; $result = mysql_query($query); foreach ($paymentr as $v) { //should collect last updated records and put them into variable for emailing. $query = "SELECT id, refid, affid FROM transactions WHERE id = '$v'"; $result = mysql_query($query) or die("Query Failed: ".mysql_errno()." - ".mysql_error()."<BR>\n$query<BR>\n"); $trans = mysql_fetch_array($result, MYSQL_ASSOC); $transactions .= '<br>User ID:'.$trans['id'].' -- '.$trans['refid'].' -- '.$trans['affid'].'<br>'; } } Unfortunately, it then updates ALL the user records with the latest date which is not what I want it to do. The alternative I thought of was, via Javascript, giving the checkbox a value that would be dynamically updated when the user selected it. Then, only THOSE checkboxes would be put into the array. Is this possible? Is there a better solution? I'm not even sure I could wrap my brain around how to do that WITH Javascript. Does the answer perhaps lie in how my mysql code is written? Thanks - I sincerely appreciate it!!!

    Read the article

  • Still don't understand file upload-folder permissions

    - by Camran
    I have checked out articles and tutorials. I don't know what to do about the security of my picture upload-folder. It is pictures for classifieds which should be uploaded to the folder. This is what I want: Anybody may upload images to the folder. The images will be moved to another folder, by another php-code later on (automatic). Only I may manually remove them, as well as another php file on the server which automatically empties the folder after x-days. What should I do here? The images are uploaded via a php-upload script. This script checks to see if the extension of the file is actually a valid image-file. When I try this: chmod 755 images the images wont be uploaded. But like this it works: chmod 777 images But 777 is a security risk right? Please give me detailed information... The Q is, what to do to solve this problem, not info about what permissions there are etc etc... Thanks If you need more info let me know...

    Read the article

  • Python on Mac: Fink? MacPorts? Builtin? Homebrew? Binary installer?

    - by BastiBechtold
    For the last few days, I have been trying to use Python for some audio development. The thing is, Mac OSX does not handle uninstalling stuff well. Actually, there is no way to uninstall anything. Once it is on your system, you better pray that it didn't do any funny stuff. Hence, I don't really want to rely on installer packages for Python. So I turn to Homebrew and install Python using Homebrew. Works fabulously. Using pip, Numpy, SciPy, Matplotlib were no (big) problem, either. Now I want to play audio. There is a host of different packages out there, but pip does not seem willing to install any. But, there is a binary distribution for PyGame, which I guess should work with the built-in Python. Hence my question: What would you do? Would you just install the binary distributions and hope that they interoperate well and never need uninstalling? Would you hack your way through whichever package control management system you prefer and deal with its problems? Something else?

    Read the article

  • What could cause these Apache crash errors ?

    - by jacobanderssen
    Hello guys. I had a server crash several days ago. I use Cacti to keep stats: at the time when the server crashed, a huge spike from Load 1 to Load 200 occurred, with over 800 processes in the run queue ( from 300 average). Upon checking /var/log/httpd I notice this: * glibc detected /usr/sbin/httpd: double free or corruption (out): 0x00002b8f3142c2f0 ** Followed by alot of these: [Sat Mar 13 19:20:20 2010] [warn] child process 3090 still did not exit, sending a SIGTERM [Sat Mar 13 19:20:20 2010] [warn] child process 3091 still did not exit, sending a SIGTERM Followed by this: ======= Backtrace: ========= /lib64/libc.so.6[0x2b8f1463c2ef] /lib64/libc.so.6(cfree+0x4b)[0x2b8f1463c73b] /usr/lib64/libapr-1.so.0(apr_pool_destroy+0x131)[0x2b8f13f98821] /usr/sbin/httpd[0x2b8f126df47e] /usr/sbin/httpd[0x2b8f126df4ab] /lib64/libpthread.so.0[0x2b8f141b87c0] /etc/httpd/modules/mod_file_cache.so[0x2b8f1cdf00fb] ======= Memory map: ======== And finally a lot of these: [Sat Mar 13 19:20:27 2010] [error] could not make child process 733 exit, attempting to continue anyway [Sat Mar 13 19:20:27 2010] [error] could not make child process 24560 exit, attempting to continue anyway [Sat Mar 13 19:20:27 2010] [error] could not make child process 31384 exit, attempting to continue anyway I am also noticing one or two lines like this: [Mon Mar 15 01:17:26 2010] [notice] child pid 20765 exit signal Segmentation fault (11) Please help me shed some light on this. Thanks !

    Read the article

  • Using DotNetOpenAuth AccessToken for uploading docx file to google

    - by PrashantC
    Hi , I am using DotNetOpenAuth Package, I am trying to upload a package to google docs, Using client credentials i am able to do it successfully using following code, DocumentEntry objDocumentEntry = new DocumentEntry(); objDocumentsService.setUserCredentials(strUserName,strPassWord); string strAuthenticationToken = objDocumentsService.QueryAuthenticationToken(); objDocumentEntry = objDocumentsService.UploadDocument(Server.MapPath("test.docx"), "New Name"); I want achieve save with plain oAuth, I am having following code written for it, if (this.TokenManager != null) { if (!IsPostBack) { var google = new WebConsumer(GoogleConsumer.ServiceDescription, this.TokenManager); // Is Google calling back with authorization? var accessTokenResponse = google.ProcessUserAuthorization(); if (accessTokenResponse != null) { this.AccessToken = accessTokenResponse.AccessToken; } else if (this.AccessToken == null) { // If we don't yet have access, immediately request it. GoogleConsumer.RequestAuthorization(google, GoogleConsumer.Applications.DocumentsList); } } } I successfully get "AccessToken", But i am not sure how to use it.. Do we need to exchange this token? what excatly to do with this token? Is it a sessionToken? Please provide some inputs, I am badly stuck with this problem from last 3 days, Prashant C

    Read the article

  • Displaying same record twice- SQL Reporting Services

    - by RyanW
    Ok, here's the situation: I need to display the same record in two different sections. stupid i know, but here's why. The Report I am building is grouped by one Field, called Day. Each record has date/times, an expected arrival date time, and an expected departure date/time. so, at this point we have something like this: Day..............Arrival Time..................Departure Time 18/5.............18/5 9.00am.........19/5 11.00am The boss only wants to show times that relate to the current day in the arrive/depart coloumns (easy enough with expressions), which ends up like this: Day..............Arrival Time..................Departure Time 18/5..............9.00am.........................- the next thing he wants is to display the departing time in the correct day 'group', but as you can imagine as soon as you move to the next row, well you move to the next row of the table. So the question is: is there anyway to display the same record on multiple coloumns? Have i missed something or have i got an unsolvable problem? NOTE: this is not the only data in my table either. there is (for example) a name coloumn which also needs to be displayed on both days.

    Read the article

  • Boost Asio UDP retrieve last packet in socket buffer

    - by Alberto Toglia
    I have been messing around Boost Asio for some days now but I got stuck with this weird behavior. Please let me explain. Computer A is sending continuos udp packets every 500 ms to computer B, computer B desires to read A's packets with it own velocity but only wants A's last packet, obviously the most updated one. It has come to my attention that when I do a: mSocket.receive_from(boost::asio::buffer(mBuffer), mEndPoint); I can get OLD packets that were not processed (almost everytime). Does this make any sense? A friend of mine told me that sockets maintain a buffer of packets and therefore If I read with a lower frequency than the sender this could happen. ¡? So, the first question is how is it possible to receive the last packet and discard the ones I missed? Later I tried using the async example of the Boost documentation but found it did not do what I wanted. http://www.boost.org/doc/libs/1_36_0/doc/html/boost_asio/tutorial/tutdaytime6.html From what I could tell the async_receive_from should call the method "handle_receive" when a packet arrives, and that works for the first packet after the service was "run". If I wanted to keep listening the port I should call the async_receive_from again in the handle code. right? BUT what I found is that I start an infinite loop, it doesn't wait till the next packet, it just enters "handle_receive" again and again. I'm not doing a server application, a lot of things are going on (its a game), so my second question is, do I have to use threads to use the async receive method properly, is there some example with threads and async receive? Thanks for you attention.

    Read the article

  • I Cannot retrieve ARPINSTALLLOCATION so we know where to install a new version [WIX]

    - by Birkoff
    I am trying to retrieve the ARPINSTALLLOCATION during the installation of a Major Upgrade version of the software. Following this info I managed to set the ARPINSTALLLOCATION to the custom path. However, retrieving it again isn't working. I've tried many things over the past days but it keeps defaulting back to the default installation path instead of the custom one. <InstallUISequence> <AppSearch After="FindRelatedProducts"/> ... </InstallUISequence> <Property Id="WIXUI_INSTALLDIR" Value="APPROOTDIRECTORY"> <RegistrySearch Id="FindInstallLocation" Root="HKLM" Key="Software\Microsoft\Windows\CurrentVersion\Uninstall\[OLDERVERSIONBEINGUPGRADED]" Name="InstallLocation" Type="raw" /> </Property> In the custom WixUI_InstallDir UI I have this in the CustomInstallDirDlg <Control Id="Folder" Type="PathEdit" X="20" Y="90" Width="260" Height="18" Property="WIXUI_INSTALLDIR" Indirect="yes" /> The alternative install path is in the registry, but it isn't retrieved and shown in the control. What am I doing wrong here? -Birkoff

    Read the article

  • PHP script stops running arbitrarily with no errors.

    - by RobHardgood
    I was working on a fairly long script that seemed to stop running after about 20 minutes. After days of trying to figure out why, I decided to make a very simple script to see how long it would run without any complex code to confuse me. I found that the same thing was happening with this simple infinite loop. At some point between 15 and 25 minutes of running, it simply stopped. There is no error output at all. The bottom of the browser simply says "Done" and nothing else is processed. I've been over every single possible thing I could think of... set_time_limit, session.gc_maxlifetime in the php.ini as well as memory_limit and max_execution_time. The point that the script is stopped is never consistent. Sometimes it will stop at 15 minutes, sometimes 22 minutes, sometimes 17... But it's always long enough to be a PITA to test. Please, any help would be greatly appreciated. It is hosted on a 1and1 server. I contacted them and they couldn't help me... but I have a feeling they just didn't know enough.

    Read the article

  • How do I make this nested for loop, testing sums of cubes, more efficient?

    - by Brian J. Fink
    I'm trying to iterate through all the combinations of pairs of positive long integers in Java and testing the sum of their cubes to discover if it's a Fibonacci number. I'm currently doing this by using the value of the outer loop variable as the inner loop's upper limit, with the effect being that the outer loop runs a little slower each time. Initially it appeared to run very quickly--I was up to 10 digits within minutes. But now after 2 full days of continuous execution, I'm only somewhere in the middle range of 15 digits. At this rate it may end up taking a whole year just to finish running this program. The code for the program is below: import java.lang.*; import java.math.*; public class FindFib { public static void main(String args[]) { long uLimit=9223372036854775807L; //long maximum value BigDecimal PHI=new BigDecimal(1D+Math.sqrt(5D)/2D); //Golden Ratio for(long a=1;a<=uLimit;a++) //Outer Loop, 1 to maximum for(long b=1;b<=a;b++) //Inner Loop, 1 to current outer { //Cube the numbers and add BigDecimal c=BigDecimal.valueOf(a).pow(3).add(BigDecimal.valueOf(b).pow(3)); System.out.print(c+" "); //Output result //Upper and lower limits of interval for Mobius test: [c*PHI-1/c,c*PHI+1/c] BigDecimal d=c.multiply(PHI).subtract(BigDecimal.ONE.divide(c,BigDecimal.ROUND_HALF_UP)), e=c.multiply(PHI).add(BigDecimal.ONE.divide(c,BigDecimal.ROUND_HALF_UP)); //Mobius test: if integer in interval (floor values unequal) Fibonacci number! if (d.toBigInteger().compareTo(e.toBigInteger())!=0) System.out.println(); //Line feed else System.out.print("\r"); //Carriage return instead } //Display final message System.out.println("\rDone. "); } } Now the use of BigDecimal and BigInteger was delibrate; I need them to get the necessary precision. Is there anything other than my variable types that I could change to gain better efficiency?

    Read the article

  • problems with retrieving data that was saved outside of a grails webflow

    - by callie16
    Hi, this is actually connected to an earlier question of mine here. Anyway, I have 3 domains that look like this: class A { ... static hasMany = [ b : B ] ... } class B { ... static belongsTo = [ a : A ] static hasMany = [ c : C ] ... } class C { ... static belongsTo = [ b : B ] ... } In my GSP page, I call an action in the Controller via a remote function in a javascript block (I'm using Dojo so I'm passing data to be saved this way... it's not a form per se so I use JSON for now to pass the data to the Controller). Let's say, I'm calling something like this: def someAction = { def jsonArr = [parse the JSON here] def tmpA = A.get(params.id) ... def tmpB = new B() b.someParam = jsonArr.someParam ... def tmpC = new C() tmpC.cParam = jsonArr.cParam tmpB.addToC(tmpC) tmpB.save(flush: true) //this may or may not be here but I'm adding it for the sake of completeness tmpA.addToB(tmpB) tmpA.save(flush: true) // NOTE: If I check here via println or whatnot, tmpA has a tmpB which has a tmpC... in other words, the data got saved. It's also in the DB. redirect(action: 'order' ...) } Then comes the fun part. Here's the webflow sample: def orderFlow = { ... someStateIShouldEndUpIn { on("next") { // or on previous... doesn't matter def anId = params.id def currA = A.get(anId) // this does NOT return a null value def testB = currA.b // this DOES return a null value }.to("somePage") ... } ... } Any ideas on why this happens? Moreover, when I dump the data of currA, b=null... instead of b=[] or b=[contents of tmpB]. Any help would be seriously appreciated... been at this for a couple of days now... Thanks!

    Read the article

  • Calc_Anniversary Function with a Loop

    - by Rachel Ann Arndt
    Name: Calc_Anniversary Input: Pay_Date, Hire_Date, Termination_Date Output: "Y" if is the anniversary of the employee's Hire_Date, "N" if it is not, and "T" if he has been terminated before his anniversary. Description: Create local variables to hold the month and day of the employee's Date_of_Hire, Termination_Date, and of the processing date using the TO_CHAR function. First check to see if he was terminated before his anniversary. The anniversary could be on any day during the pay period, so there will be a loop to check all 14 days in the pay period to see if one was his anniversary. CREATE OR replace FUNCTION Calc_anniversary( incoming_anniversary_date IN VARCHAR2) RETURN BOOLEAN IS hiredate VARCHAR2(20); terminationdate VARCHAR(20); employeeid VARCHAR2(38); paydate NUMBER := 0; BEGIN SELECT Count(arndt_raw_time_sheet_data.pay_date) INTO paydate FROM arndt_raw_time_sheet_data; WHILE paydate <= 14 LOOP SELECT To_char(employee_id, '999'), To_char(hire_date, 'DD-MON'), To_char(termination_date, 'DD-MON') INTO employeeid, hiredate, terminationdate FROM employees, time_sheet WHERE employees.employee_id = time_sheet.employee_id AND paydate = pay_date; IF terminationdate > hiredate THEN RETURN 'T'; ELSE IF To_char(SYSDATE, 'DD-MON') = To_char(hiredate, 'DD-MON')THEN RETURN 'Y'; ELSE RETURN 'N'; END IF; END IF; paydate := paydate + 1; END LOOP; END; I need help with the loop..

    Read the article

  • Custom Silverlight Splash Screen causes White Screen of Death

    - by wickster05
    I'm developing a Silverlight 4 application and I've created a custom splash screen. At first glance, the custom splash screen worked well - really well. After a few days I started noticing that the splash screen would no longer show and the screen would remain blank. This seems to only occur when I open multiple IE tabs/windows all pointing to this same application. The first few will load fine, while the following tabs/windows will remain "white" - as if nothing has/is loaded. This doesn't appear to be an issue with other browsers that I've tested with (i.e., Firefox and Chrome). Unfortunately, this product requires multiple screens to be open (and I'm not going to require our users to use a non-Microsoft internet browser). Furthermore, we have another product that hosts this Silverlight application inside a WPF WebBrowser control (which is similar to IE - and experiences the same issues as delineated above). Does anyone have any ideas on how to get around this? This is becoming increasingly frustrating. I should also point out, that the default splash screen seems to avoid these issues. When I remove the custom splash screen, we no longer see these problems. ANY help would be appreciated greatly! -Tom

    Read the article

  • Integer array or struct array - which is better?

    - by MusiGenesis
    In my app, I'm storing Bitmap data in a two-dimensional integer array (int[,]). To access the R, G and B values I use something like this: // read: int i = _data[x, y]; byte B = (byte)(i >> 0); byte G = (byte)(i >> 8); byte R = (byte)(i >> 16); // write: _data[x, y] = BitConverter.ToInt32(new byte[] { B, G, R, 0 }, 0); I'm using integer arrays instead of an actual System.Drawing.Bitmap because my app runs on Windows Mobile devices where the memory available for creating bitmaps is severely limited. I'm wondering, though, if it would make more sense to declare a structure like this: public struct RGB { public byte R; public byte G; public byte B; } ... and then use an array of RGB instead of an array of int. This way I could easily read and write the separate R, G and B values without having to do bit-shifting and BitConverter-ing. I vaguely remember something from days of yore about byte variables being block-aligned on 32-bit systems, so that a byte actually takes up 4 bytes of memory instead of just 1 (but maybe this was just a Visual Basic thing). Would using an array of structs (like the RGB example` above) be faster than using an array of ints, and would it use 3/4 the memory or 3 times the memory of ints?

    Read the article

  • HTML5 or Flash?

    - by lewiguez
    I have to write a web application for a client soon. Looking at the specs, there is no reason why the project couldn't be an HTML5/CSS/Javascript project, but the client is arguing that it has to be Flash. The project has a number of dynamic elements and is web-based. It'll only be used in-house by a small number of people and all of those people use either Google Chrome or Safari 4. They are all pretty tech-savvy to boot. My question is this: what are some of the reasons (preferably technical since this is Stack Overflow) I can present to my client as to why HTML5 is better than Flash (that's assuming I'm right and it is in this case)? Is it OK to use HTML5 even though it's still a draft spec (I'm assuming it is after checking out all those Apple HTML5 demos a few days ago)? Also, would a hybrid approach be preferable for now? Something that uses Flash wherever the canvas object would've been used in the HTML5 approach and that conforms to a normal XHTML approach. Help!

    Read the article

  • Django 1.1 template question

    - by Bovril
    Hi All, I'm a little stuck trying to get my head around a django template. I have 2 objects, a cluster and a node I would like a simple page that lists... [Cluster 1] [associated node 1] [associated node 2] [associated node 3] [Cluster 2] [associated node 4] [associated node 5] [associated node 6] I've been using Django for about 2 days so if i've missed the point, please be gentle :) Models - class Node(models.Model): name = models.CharField(max_length=30) description = models.TextField() cluster = models.ForeignKey(Cluster) def __unicode__(self): return self.name class Cluster(models.Model): name = models.CharField(max_length=30) description = models.TextField() def __unicode__(self): return self.name Views - def DSAList(request): clusterlist = Cluster.objects.all() nodelist = Node.objects.all() t = loader.get_template('dsalist.html') v = Context({ 'CLUSTERLIST' : clusterlist, 'NODELIST' : nodelist, }) return HttpResponse(t.render(v)) Template - <body> <TABLE> {% for cluster in CLUSTERLIST %} <tr> <TD>{{ cluster.name }}</TD> {% for node in NODELIST %} {% if node.cluster.id == cluster.id %} <tr> <TD>{{ node.name }}</TD> </tr> {% endif %} {% endfor %} </tr> {% endfor %} </TABLE> </body> Any ideas ?

    Read the article

  • How to create a snowstorm on your Windows desktop?

    - by Vilx-
    Practical uses aside, how (if it is possible at all) could you create a "snowing" effect on your desktop PC running Windows? Preferably with nothing but raw C/C++ and WinAPI. The requirements for the snow are: Appears over everything else shown; Snowflakes are small, possibly simple dots or clusters of a few white pixels; Does not bother working with the computer (clicking a snowflake sends the click through to the underlying window); Plays nicely with users dragging windows; Multimonitor capable. Bonus points for any of the following features: Snow accumulates on the lower edge of the window or the taskbar (if it's at the bottom of the screen); Snow accumulates also on top-level windows. Or perhaps some snow accumulates, some continues down, accumulating on every window with a title bar; Snow accumulated on windows gets "shaken off" when windows are dragged; Snow accumulated on taskbar is aware of the extended "Start" button under Vista/7. Snowflakes have shadows/outlines, so they are visible on white backgrounds; Snowflakes have complex snowflike-alike shapes (they must still be tiny). Most of these effects are straightforward enough, except the part where snow is click-through and plays nicely with dragging of windows. In my early days I've made an implementation that draws on the HDC you get from GetDesktopWindow(), which was click-through, but had problems with users dragging windows (snowflakes rendered on them got "dragged along"). The solution may use Vista/7 Aero features, but, of course, a universal solution is preferred. Any ideas? :)

    Read the article

  • Intermittent Issue Writing to Google Appengine Datastore

    - by user242153
    Hi, I have a functioning app and recently have had intermittent problems writing to the datastore. I did not make any relevant code changes, however in the last few days my attempts to write to the datastore sometimes work and sometimes don't. I am trying to save an object that is in a many to one relationship with an existing persisted parent. So, the logic works like this: 1) Parent pulled from the datastore 2) Child created / instantiated using constructor 3) Parent.addSingleChild(child); // the "addSingleChild" method just adds the object argument to the collection of children 4) child.setParent(Parent); // sets the Parent object to the parent field I am using transactions as explained in the documentation ending with "finally {if (tx.isActive()) {tx.rollback(); } }" When the servlet is called, the parent is called from the datastore and the child object is created and added to the many to one mapping to the pre-existing parent. The child should automatically be persisted, since the parent is already persistent, and the child is added to the collection of children that map to the parent. And it worked this way in the past. However, to be sure, i did add a pm.makePersistent(child). Doesn't seem to help, still have the intermittent problem. Any suggestions would be appreciated, and if you need to see the actual code I can post. Thanks

    Read the article

  • Cheap cloning/local branching in Mercurial

    - by Zack
    Hi, Just started working with Mercurial a few days ago and there's something I don't understand. I have an experimental thing I want to do, so the normal thing to do would be to clone my repository, work on the clone and if eventually I want to keep those changes, I'll push them to my main repository. Problem is cloning my repository takes alot of time (we have alot of code) and just compiling the cloned copy would take up to an hour. So I need to somehow work on a different repository but still in my original working copy. Enter local branches. Problem is just creating a local branch takes forever, and working with them isn't all that fun either. Because when moving between local branches doesn't "revert" to the target branch state, I have to issue a hg purge (to remove files that were added in the moved from branch) and then hg update -c (to revert modified files in the moved from branch). (note: I did try PK11 fork of local branch extension, it a simple local branch creation crashes with an exception) At the end of the day, this is just too complex. What are my options?

    Read the article

  • Best way to create a SPARQL endpoint for a RDBMS (MySQL database)

    - by Ankur
    I am doing (want to do) some experiments with Linked Open Datasets particularly those put out by governments. I have a RDBMS (more specifically MySQL). I designed it with semantic web ideas in mind i.e. I have a information stored as objects, predicates and classes which define objects. In turn all objects are related to each other though statements of the form subject -- predicate -- object (where the subjects are from the objects table). I want to be able to query other RDF triple stores from my application and let other triple stores query my data. Is it possible to "set something up" so that this is possible? I have looked at Jena. Using Jena seems to mean I have to it as a storage application rather than MySQL - the only problem with this is that I include a new concept called a category (which I don't think is part of the semantic web languages). I will use categories to help with displaying information (they don't have any other meaning) but using Jena seems to mean that I can't organise predicates under categories for more convenient viewing. I am using Java so a JAVA API is preferred. It's also possible I misunderstood the purpose of Jena, and maybe that can be of use, but I am not sure how. I am sure four days from now this question will seem rather silly, but at the moment I am somewhat confused about how to proceed.

    Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >