Search Results

Search found 10492 results on 420 pages for 'online backups'.

Page 259/420 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

• How long do managed gigabit ethernet switches take to boot up?

  - by Warren P

  One critical drawback that I have found in researching managed-switches, and one that I have some past experience with is that anything with "lots" of firmware is going to have lots of issues associated with that firmware. We are in the middle of researching rackmount gigabit switches (48 port). It looks like for 48 ports, our only choice is managed switches (Dell, Cisco/Linksys,HP, etc). What I want to know, that I can not find out much about is the boot-time for various managed switches. If you own one, can you please answer with the model number, and the cold boot time in seconds. I have read online that Linksys (now Cisco) SRW series sometimes take almost 5 minutes before they are fully booted up, and that is an unacceptable cost for us. I particularly want to know about Dell PowerConnect managed switch bootup time (model 3548 and 5448), and would like to confirm the 5-minute boot time on the SRW2048 or similar model, and any HP ProCurve boot up times. The composite of all those figures ought to form an interesting overall performance picture.

  Read the article

• How can I receive more traffic? My VPS fails!!!

  - by Vic

  I have a web site - photo gallery. About 400 photos. Site on Gallery 3. mySQL. Hosted on VPS from myhosting.com (CPU 1792 MHz, 2048 MB RAM). Everything seems to be ok, but there is one big problem. Once traffic reaches ~ 20 people (online) - website start loading really really slow. Actually website can't be loaded about 30-60 sec. What should I do? Buy more RAM / CPU on the same VPS? Move to a dedicated server or maybe myhosting.com just sucks? What do you recommend?

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• Reliable Linux RAID Card

  - by Chris S

  Can anyone recommend an appropriate RAID card for use under Linux (Ubuntu)? I have three Western Digital SATA drives, and would like to setup either RAID-1 or RAID-5. Software RAID has been very flakey and unreliable for me (e.g. it doesn't seem to mirror the boot partition). Unfortunately, most RAID cards I've seen online don't mention any Linux driver support. Would most cards work in Linux, or do I have to look at a select few that explicitly support Linux?

  Read the article

• How to make outlook.com/Office 365 use plain text and/or conventional quotes?

  - by user23122

  I am forced to use the web version of Outlook at Office 365. I really dislike how it formats e-mail as well as how it handles quoting when replying. In the desktop version of Outlook you can at least force it too display the messages in plain text and then you can manually bottom post/post interleaved. Plain text also changes how it handles quotes: " " is used rather than some braindead RTF version of format=flowed (I like format=flowed when it is implemented without bugs) although the attribution line is completely useless but in the online version I can't find a way to achieve even this. Any ideas? I guess a Greasemonkey script could do this?

  Read the article

• windows server backup 2008 R2 - what is generating all the change data?

  - by bobjandal

  We have a small relatively idle windows server 2008 R2 installation that does basic filesharing and exchange for about 10 not very active users. When running a windows server backup, the incremental data daily is about 20GB. This is not coming from users shared files, nor from changes in their mailbox sizes. The total size of the installation is 249GB, which is mostly old files. Where is all this data coming from, and how can I reduce it ? Using online backup of the vhd file from the backup is taking a while because of this daily change. Is there some way I can at least see what files are changing and contributing to this data ? Options I can think of but am not sure about: 1) pagefile churning - altho the backup does not include the pagefile, perhaps the changed blocks left behind are included ? 2) logs or something ? but the installation size stays the same every day 3) should I zero free space using sdelete before backing up perhaps ?

  Read the article

• Active Directory Corrupted In Windows Small Business Server 2011 - Server No Longer Domain Controller

  - by ThinkerIV

  I have a rather bad problem with my Windows SBS 2011. First of all, I'll give the background to what caused the problem. I was setting up a new small business server network. I had my job about finished. The server was working great, all the workstations had joined the domain, and I had all my applications and data moved to the server. I thought I was done. But then it happened. I tried adding one more computer to the domain, and to my dismay the computer name was set to the same name as the server. Apparently when a computer joins a domain with the same name as another machine that is already on the domain, it overrides the first one. For normal workstations, this is not a big deal, you just delete the computer from AD and rejoin the original computer to the domain. However, for a server that is the domain controller it is a whole different story. Since the server got overridden in AD, it is no longer the domain controller. The DNS service is not working and all kinds of other services are failing also. So the question is, what are my options? I am embarrassed to admit it, but since this is a new server one thing I did not have setup yet was backup. So I have no backups to work from. I am worried that things are broken enough that I might need to do a reinstall. However, I already have several days worth of configuration into this server, so I would obviously prefer if there was a fix that would prevent me from needing to do a reinstall. All the server components are there and installed correctly, but they are misconfigured (I think it is basically just Active Directory). So I have the feeling that if I did the right thing I could solve the issue without a reinstall. Is there anyway to rerun the component that installs the initial configuration to "convert" the base windows server 2008 r2 install into a SBS? In other words in the program files folder there is an application called SBSsetup.exe, is there anyway to rerun this and have it reconfigure AD, etc. to work with SBS? Any insight will be greatly appreciated. Thanks.

  Read the article

• How to find out if the screen is WLED or RGBLED on Dell Studio XPS 16?

  - by Abhijeet

  I just ordered the Dell Studio XPS 16 with i7 and 16" RGBLED screen. This upgrade from WLED LCD to RGBLED LCD charged me more $$. But now when I view the order online, it lists this part as "320-8335 Premium FHD WLED Display, Obsidian Black, 2.0 MP Webcam". When called Dell, the rep says this part is RGBLED screen and the "premium" is for RGBLED. I want to make sure they are shipping me the RGBLED screen and not the WLED. Is there any way to verify this after I receive (either from Device Manager or BIOS or somewhere in system settings)? Also, is there any published specifications / criteria that we can run (some third party software) on this monitor which can tell if this is WLED or RGBLED?

  Read the article

• Cheapest way to go for somebody who wants to accept payments, but won't be accepting hundreds of ord

  - by blockhead

  I have a client who lectures, and wants to sell spots to his lecture online. I would preferably like to set him up with a solution that allows me to collect billing information on his site. My experience with e-commerce is in using solutions like Authorize.net, however this does not seem cost effective since I can't imagine he's making a huge profit off of this. I'm afraid he would lose money in the cost of using Authorize.net (or any payment gateway for the matter). I could use google checkout or paypal express, but this would require me to leave his site (although with google checkout, it looks like, from a glance, that I could just submit to their form from my server, and likely with paypal as well, but I don't know if this is against their TOS). What is the most cost-effective solution for accepting credit card payments in this situation?

  Read the article

• Uninstall or Disable Dell Wave

  - by Onion-Knight

  The image we put on our company laptops includes the Dell Wave interface for Biometric log in. The Wave UI increases boot time by about 5 minutes (because it loads the fingerprint database(a feature I don't use)), so I'm trying to uninstall it, but with little success. There is no line-item in the Add/Remove Programs menu to formally delete it, nor is there a Service I can stop/remove to disable the Wave UI. I've tried looking online, but all I find instead are hits for Google Wave and virus-removal forums with HyjackThis dumps that include Dell Wave records. Any ideas? Edit: Removal isn't entirely necessary. Disabling the Wave UI is good enough.

  Read the article

• Sonicwall Enhanced With One-To-One NAT, Firewall Blocking Everything

  - by Justin

  Hello, just migrated from a Sonicwall TZ180 (Standard) to a Sonicwall TZ200 (Enhanced). Everything is working except the firewall rules are blocking everything. All hosts are online, and being assigned correct ip addresses. I can browse the internet on the hosts. I am using one-to-one NAT translating public ip addresses to private. 64.87.28.98 -> 192.168.1.2 64.87.28.99 -> 192.168.1.3 etc First order of business is to get ping working. My rule is in the new firewall is (FROM WAN to LAN): SOURCE DESTINATION SERVICE ACTION USERS ANY 192.168.1.2-192.168.1.6 PING ALLOW ALL This should be working, but not. I even tried changing the destination to the public ip addresses, but still no luck. SOURCE DESTINATION SERVICE ACTION USERS ANY 64.87.28.98-64.87.28.106 PING ALLOW ALL Any ideas what I am doing wrong?

  Read the article

• booting FreeBSD 9 from USB stick: boot error

  - by ssc

  I am trying to boot FreeBSD 9 from a USB stick that I created following the official guidelines: dd if=FreeBSD-9.0-RELEASE-i386-memstick.img of=/dev/da0 bs=64k Booting fails with a simple 'boot error'. I have used this USB stick for quite a while for the very purpose of booting / installing new OSs, but I tried a different one anyway - same problem. I have also reproduced the issue on a different machine. I've acquired to image file over torrent which AFAIK has an md5 check built in, but I downloaded it again anyway directly from a FreeBSD mirror. Same result. Does anyone have any success with this ? I did not find anything related online which seems to suggest this is not a well-known problem. Does anyone have a thought where else to search for the cause of the problem ?

  Read the article

• Open Microsoft Publisher Document on Linux

  - by Peter

  I'm pretty sure the options consist of Just don't do it (use a nice open standard file format). Not great when someone sends you something. Translate the format on Windows. I think you need Publisher, the viewer won't even print. But you can download a trial version for a once off (been there, done that). Submit the file for online translation to PDF. www.pdfonline.com/convert-pdf/ Use a Windows VM, wine, crossover office, Win4Lin, or otherwise run Publisher "under" linux. What I really want to do is convert it to something nicer natively under Linux.

  Read the article

• What happens with the Guest OS's on ESXi in the event of a power failure?

  - by Jeremy Holovacs

  Many small businesses would prefer to let their server drop on power failure than to pay even $100 for a cheap UPS. It's often difficult to convince them of the value of something like that; it's why they like ESXi. It's free, they can save a lot of cash by putting a bunch of linux servers on one machine, and then I get paid. :) If the ESXi server experiences a power outage, it is set to come back on automatically when power is restored. What happens with the guest OS's? Ideally I would like them to all come online again as well, assuming they were on when power was lost, but I see no option for choosing this. I don't want to yank power to the system just to try it out, of course. I'm sure someone knows what happens by default, and perhaps how to make my system to work as I would wish.

  Read the article

• Browsing not working in Windows 8

  - by Jonathan Perry

  I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

  Read the article

• How do you sync photos with your family?

  - by romkyns

  We've always been trying to share photos within our family, despite all living in different countries. This has been very challenging. We have about 50GB of photos that we share with each other. Everyone organizes them differently, so rsync/Syncplicity don't work. Everyone likes their photos on the fast hard drive rather than a slow website with reduced quality, so online sharing websites are a no-go. So far we have been essentially syncing them manually, via a shared folder that new photos are placed to and collected from. This is laborious and prone to errors, that usually leave one of us without all the photos without even knowing. To those who are in a similar situation, how do you solve this?

  Read the article

• In general, do 3rd-party laptop AC adapters / chargers work reliably?

  - by MGOwen

  The AC adapters for my 2 dell laptops wore out very quickly. One supplies power but won't charge the battery (it's about 3 years old, the other is a bit newer). Both have worn through to the shielding around the notebook connector and look like they'll be unusable soon. Checking user reviews of the replacement adapter on Dell's own website, it appears they usually fail this fast. Apparently Dell does this deliberately to make money (their adapters sell for about 10-15 times what they cost to make). Same with replacement batteries. I can see there are plenty of much cheaper ($50 less) compatible AC adapters on eBay. Does anyone have experience with these? Naturally I'm nervous a crappy knock-off could fry my notebook, but has this ever actually happened to anyone recently? Has anyone had a good experience? Can anyone recommend a good online seller (who doesn't charge nonsensical shipping costs to Australia, preferably?)

  Read the article

• Lenovo G530 laptop screen flicker

  - by Kevin

  I have a Lenovo G530 laptop that has an issue with screen flicker that is getting worse. The computer screen will start going thru a crazy screen flicker then will stop and start again. I have already checked cable connection to lcd on motherboard and reseated connection as someone suggested in another posting I found online that resolved issue. I am starting to think it might be a bad inverter or screen because I have hooked up laptop to external monitor and it is running fine with no flickering happening when the flickering is occurring on laptop. I am attaching a link to a small video I shot of the issue as it is occurring on laptop screen. Does anyone have any further suggestions? Bad inverter or screen? Screen flicker vid

  Read the article

• Securing a local server physically

  - by Daniele

  We are an online business. We have a very powerful server with hard disk mirroring in our office that we are using for a variety of internal business-critical functions. We want to keep that machine in our office but we want to make sure it is as secure as possible (within reason). Obviously we are already backing it up everyday off-site. My question is more about not-too-expensive physical measures to protect the machine against thieves and disasters such as fire. What would you suggest?

  Read the article

• Ping: Destination Host Unreachable, from the destination host itself

  - by phunehehe

  I have a server that responds in a weird way to ping: $ ping hostname.com PING hostname.com (<IP address>) 56(84) bytes of data. From hostname.com (<IP address>) icmp_seq=1 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=2 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=3 Destination Host Unreachable From hostname.com (<IP address>) icmp_seq=4 Destination Host Unreachable I'm confused, as the messages come from the server that I want to ping, and at the same time it's saying Destination Host (itself) Unreachable. Pinging by IP address yields the same result. The server is online and operating normally. What could be the cause?

  Read the article

• make sure i've configured dns correctly

  - by user22817

  Hi, On my server with Windows Server 2008, i've added a new zone with my new domain: biografica.ro. I've added a name server for it: ns.biografica.ro and the ip of the server. Also i added two A hosts for ns.biografica.ro and www.biografica.ro. I've also defined first that name server on the site where i bought the domain and pointed it to my ip. Now, i understood that i have to wait 24-48 hours for this new domain to be available online. Question: - is this a way to check on the server that i've succesfully configured it? For instance: nslookup biografica.ro or nslookup www.biografica.ro or ping www.biografica.ro do not work locally, on the server... Can you give me an advice? Thanks.

  Read the article

• Connect android to database

  - by danny

  I am doing a school project where we need to create an android application which needs to connect to a database. the application needs to gain and store information for people's profiles on the database. But unfortunatly we are a little bit stuck at this point because there are numerous ways to link the application such as http request through apache or through the SOAP/REST protocol. But it's really hard to find good instructions or tutorials on the problem since I can't really find them. Maybe that's cause i'm probably using the wrong words on google. Unfortunately I have little relevant information. So if anyone can help me with finding relevant links to good online tutorials or howto's than those are very welcome.

  Read the article

• xampp admin page access forbidden

  - by Vihaan Verma

  I m new to apache world ! I read some docs online to setup virtual host . Which works fine ! Here are the content of httpd-vhosts.conf file <Directory C:/vhosts> Order Deny,Allow Allow from all </Directory> NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot "C:/htdocs" ServerName localhost </VirtualHost> <VirtualHost *:80> DocumentRoot "C:/vhosts/phpdw" ServerName phpdw </VirtualHost> But now when I access the xampp control panel and try accessing the apache admin page I get access defined eror (403) . My guess is that there needs to be some more configuration in this file to allow access to localhost. I could not find anything relevant . Thanks

  Read the article

• How to create limited user accounts in Linux

  - by James Willson

  I want to create a user account for each of the key programs installed on my debian server. For example, for the following programs: Tomcat Nginx Supervisor PostgreSQL This seems to be recommended based on my reading online. However, I want to restrict these user accounts as much as possible, so that they dont have a shell login, dont have access to the other programs and are as limited as possible but still functional. Would anyone mind telling me how this could be achieved? My reading so far suggests this: echo "/usr/sbin/nologin" /etc/shells useradd -s /usr/sbin/nologin tomcat But I think there may be a more complete way of doing it. EDIT: I'm using debian squeeze

  Read the article

• Active DFS node did not restore after failure

  - by Mark Henderson

  On Tuesday we had a Server 2008 R2 DFS-R node go offline unexpectedly. DFS did the right thing and started routing requests to a different node, which was in a remote site. This is by design, because even though it's slow, at least it's still working. We had the local DFS-R node back online within an hour, and it had synced all its changes 10 minutes after that. 3 of the 5 terminal servers reset themselves to the local DFS node, but the other two stayed pointing at the remote DFS node for three days, until someone finally piped up about how slow requests were. What reasons could there be why some, but not all, of the server reverted? Is the currently active DFS node for a namespace exposed anywhere in the OS (WMI, or even scripts) so that we can monitor the active nodes?

  Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >