Search Results

Search found 2370 results on 95 pages for 'av cable'.

Page 26/95 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • router cannot get ip address

    - by user43208
    Hi guys, I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • Why maximum 1.0 Gbit Ethernet connection an old notebook, and only 100 Mbit on newer faster computer

    - by Sam
    Strange problem about Ethernet speed: recently we bought an i7 core computer running Win7 64 bit with an onboard Gigabit Ethernet controller (Realtek PCIe Gbit Ethernet Family controller). Connecting this new fast pc directly to our brand new ASUS Gigabit Ethernet router via CAT6 cable(!) shows up the adapter status (see picture attached) only 100mbit, while the router is capable of 1000 mbit. More facts: Connecting an 8 year old IBM notebook with gigabit ethernet to the same cable end shows 1.0 Gbit connection in its adapter status. Speedtest.net shows 35 mbit/s down on the new computer Speedtest.net shows 78 mbit/s down on the old rusty IBM notebook. We have an 120 mbit down internet connection, which we we truly receive on another pc (also directly connected to the router) How to get the 1.0 Gbit going in the new pc ?

    Read the article

  • Is Gmail Being Blocked by my ISP?

    - by james
    I asked this over at superuser but they weren't able to help, so I was hoping the sysadmins here will be able to advise as to what's wrong. Although the issue here is with a PC and not a server it still deals with networking so I hope it's not too irrelevant. The Issue: I have a desktop on which I cannot access Gmail and also youtube sign in (I believe since youtube is owned by google they both use the same sign in system). On other computers that uses the same connection via a wireless router I can access both gmail and youtube sign in just fine. On this computer which doesn't have a wireless card and so I have to connect via Ethernet cable (connected to a USB converter since the Ethernet port doesn't work anymore) I can access all sites and services including things like aol and hotmail. But only when it comes to gmail, do I get complete and utter throttling. I even turned off my AV ad Firewall momentarily and no luck. The gmail log in page starts to load and by mid point it just stays there loading and loading and loading... never ends. I tried everything, I reset the modem and router multiple times. I reinstalled my operating system from a vista to a windows 7 hoping that a complete reinstall would solve the issue, but no luck. And yes, I am going to call my ISP but not to solve this issue, but to cancel them. I want to upgrade to cable from DSL anyway. I didn't mention my ISP because I'm not sure if that is within the rules (if it's okay some one let me know and I will). P.S. All this happened one day, before that gmail was perfectly accessible in this computer. I can't remember anything special happening on that day prior to this. The only thing I can think of is, my ISP or Google itself is blocking this computer based on it's mac address, but I don't know if that's even done. Additional info: PC: Windows 7 Ultimate 32 bit Connection Type: DSL Connecting Medium: Ethernet cable via USB converter EDIT: I should mention I can access gmail and youtube just fine through a IP proxy service.

    Read the article

  • Is Gmail Being Blocked by my ISP?

    - by james
    EDIT: I thought I pinpointed the problem. Just now I tried to go to the firefox addons page which uses https and gmail also uses https. So I thought I am unable to load https pages on this computer. So I went to a bank site which uses https but that loads just fine. Sigh.... I asked this over at superuser but they weren't able to help, so I was hoping the sysadmins here will be able to advise as to what's wrong. Although the issue here is with a PC and not a server it still deals with networking so I hope it's not too irrelevant. The Issue: I have a desktop on which I cannot access Gmail and also youtube sign in (I believe since youtube is owned by google they both use the same sign in system). On other computers that uses the same connection via a wireless router I can access both gmail and youtube sign in just fine. On this computer which doesn't have a wireless card and so I have to connect via Ethernet cable (connected to a USB converter since the Ethernet port doesn't work anymore) I can access all sites and services including things like aol and hotmail. But only when it comes to gmail, do I get complete and utter throttling. I even turned off my AV ad Firewall momentarily and no luck. The gmail log in page starts to load and by mid point it just stays there loading and loading and loading... never ends. I tried everything, I reset the modem and router multiple times. I reinstalled my operating system from a vista to a windows 7 hoping that a complete reinstall would solve the issue, but no luck. And yes, I am going to call my ISP but not to solve this issue, but to cancel them. I want to upgrade to cable from DSL anyway. I didn't mention my ISP because I'm not sure if that is within the rules (if it's okay some one let me know and I will). P.S. All this happened one day, before that gmail was perfectly accessible in this computer. I can't remember anything special happening on that day prior to this. The only thing I can think of is, my ISP or Google itself is blocking this computer based on it's mac address, but I don't know if that's even done. Additional info: PC: Windows 7 Ultimate 32 bit Connection Type: DSL Connecting Medium: Ethernet cable via USB converter I should mention I can access gmail and youtube just fine through a IP proxy service.

    Read the article

  • Unable to extend desktop

    - by CSharperWithJava
    I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

    Read the article

  • My wifi internet router connection resets when more devices connected

    - by joeeoj
    The wifi internet router is connected directly to Internet cable. The main Pc is attached to it via LAN cable, while 1 laptop and 3 mobile phones connect to it via wifi. Whenever 2 or more devices connect via wifi, the internet connection breaks after one minute and internet connection resets. I tracked this behaviour for weeks, and came to conclusion: It seems like some 'device 1' got IP then it went to suspend mode. Then 'device 2' connected to router and got the same IP. Then the 'device 1' woke up from suspend mode and tried to use his old IP. The router sees that 2 same IP addresses exists and automatically reset internet connection. Is this possible? Have I tracked the problem correctly and how to solve it? The router is set to lease 100 IP addresses to devices who try to connect. The password is strong and no hacker's device is being connected to my wifi network. Tried changing password and AP's name.

    Read the article

  • Free MPEG cutting/cropping/editing tool

    - by Stijn Sanders
    I'm looking for a free tool to cut MPEG's that are created by recording from a USB cable receiver. There are a number of applications that do this, and some are free, but most of them take the video and audio decoded and pass them into a codec again to write the final output. I already have the MPEG's encoded the way I like, so what I need is a tool that can strip the beginning and the ending of the recording before and optionally commercial breaks, by rearranging the data within the file, not re-encoding it. Now I'm using some old software that came with the cable-receiver, but this actually re-encodes the video when exporting. I've tried VirtualDub but had major trouble getting the audio and video streams to stay in sync (and this was also re-encoding)... I found this which comes pretty close, but doesn't allow much accuracy in selecting cut positions.

    Read the article

  • Digital audio does not work on MacBook Pro

    - by mathk
    I have a MacBook Pro (8,2). Using a TOSLINK cable I have no digital output. Oddly enough, sometime I can hear a glitch when I plug in the cable or when I give it a gentle wiggle. My guess is that the output is not correctly detecting that I have a digital link. So is there a way to force digital audio output on a MacBook Pro? Some say that in the Audio MIDI Setup there is an option but I can't find it. I am running OS X 10.7.5.

    Read the article

  • Use wired LAN adapter by default

    - by Frantumn
    I am trying to find out if there's a way to set up network adapters so that if 2 are connected with network and internet access it will choose one over the other. Scenario: I have seen several computers running Windows 7 or Windows 8 where you are connected to a wireless network, working perfectly. Then when you plug in an Ethernet cable, it still shows the network icon in the taskbar as wireless. I would like to have my computer set up so that if there's an Ethernet cable plugged in, it uses that, and not the wireless adapter. 1) Is this possible / How? 2) Why does it stay on wireless over wired when given the option for both?

    Read the article

  • how to run an AFS file server on a specific ethernet card (in Debian)

    - by listboss
    I have a linux box running Debian server with minimal number of packages (so no GUI for network management). The box has two ethernet cards, one of which (eth0) is connected to a Mac OSX computer using a cross-cable. I can bring up eth0 and assign a static ip (10.10.11.16) to it. This way I can ssh to the box through the cross-cable. This is what I run on Linux box: ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up I also installed/started a file server (AFS) on Debian. So far, the file server can only be accessed through eth1 which is exposed to my home LAN and www. My goal is to set up the file server so that it's only visible through eth0. Is this possible? and if yes, how can I do it?

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

    - by user33521
    We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

    Read the article

  • pix 501, static route to d-link router (different subnet)

    - by ra170
    I have pix 501 cisco firewall with internal ip 192.168.10.1. I have connected d-link router (dir-655) to pix 501. The d-link router has internal ip 192.168.0.1 The picture would like something like that: |pix 501| has 192.168.10.1 ip |DIR-655| has 192.168.0.1 ip 1. |cable modem|----|pix 501|-------|DIR-655|-----PC 2. PC--------|pix 501|---------|DIR-655| | | |cable modem| When I'm on the wireless network (dir-655) with assigned ip of 192.168.0.x I can cross the subnet and connect to my firewall 192.168.10.1. (pic. 1) The problem is that if I'm on the 192.168.10.x network I can't connect to anything over at 192.168.0.x network. (pic.2) I've tried entering a static route like this: `route inside 192.168.0.0 255.255.255.0 192.168.10.1 1` I also tried assigning static ip to wan interface on DIR-655 to 192.168.10.30 and then tried this: route inside 192.168.0.0 255.255.255.0 192.168.10.30 1 But still, can't connect to 192.168.0.1 or anything on that subnet. Is there a way to setup a static route? Would adding a separate router between PIX 501 and DIR-655 help? I would think that static route like this should take care of it, but it doesn't. This is my route config and nat: (config)# sh route outside 0.0.0.0 0.0.0.0 (outside_IP) 1 DHCP static outside (outside_IP) 255.255.248.0 (outside_IP) 1 CONNECT static inside 192.168.0.0 255.255.255.0 192.168.10.1 1 OTHER static inside 192.168.10.0 255.255.255.0 192.168.10.1 1 CONNECT static or (route inside 192.168.0.0 255.255.255.0 192.168.10.30 1) (config)# sh nat nat (inside) 1 192.168.1.0 255.255.255.0 0 0 nat (inside) 1 192.168.10.0 255.255.255.0 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 I ended up turning DIR-655 into an Access Point (turning off DHCP and pluging cable from PIX lan interface into one of the LAN interfaces on DIR-655, and leaving WAN port empty), that works as far as DIR-655 being on the same subnet now, and I can access every machine. However the question is, why can't I simply route between those two? would router between these two help? One of the reasons is, that the PIX 501 has only 10 licences, so now I'm using almost all of them. (I have few computers, iphones, ps3, print server, etc.) I would really appreciate some help! Thanks.

    Read the article

  • assign auto static ip on ubuntu 10.04

    - by ronakin
    I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

    Read the article

  • Postfix to deliver mail to a virtual address mailbox

    - by Chloe
    Postfix version 2.6.6, Dovecot Version 2.0.9 I want to setup Postfix + Dovecot. Dovecot seems to be working. I can authenticate. However, the mailbox is empty! Nothing will get delivered! I followed many tutorials on Postfix + Dovecot but they seem to want to complicate things by using Dovecot LDA or MySQL. I just want it to be very simple and having Postfix deliver to the virtual mail boxes are fine. I don't need MySQL either. I already set up a custom password file that Dovecot uses for authentication and I can login to POP3 with SSL. I can see from the logs that Postfix is delivering to the system user accounts (the catch-all), instead of the virtual users that I set up in Dovecot. The SMTP + SSL authentication seems to work also. I can also see from the logs that Dovecot is checking the correct virtual mail folder. I just need to figure out how to get Postfix to deliver to the virtual mail boxes. I have the following which I believe are relevant. Let me know what other settings you need to see: alias_maps = hash:/etc/aliases mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = xxx.com myhostname = mail.xxx.com mynetworks = 99.99.99.99, 99.99.99.99 myorigin = $mydomain relay_domains = $mydestination, xxx.com, domain2.net, domain3.com sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = reject_non_fqdn_sender reject_non_fqdn_recipient reject_unknown_recipient_domain permit_sasl_authenticated check_relay_domains smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = check_sender_mx_access cidr:/etc/postfix/bogus_mx reject_invalid_hostname reject_unknown_sender_domain reject_non_fqdn_sender virtual_mailbox_base = /var/spool/vmail virtual_mailbox_domains = xxx.com, domain2.net, domain3.com virtual_minimum_uid = 444 Postfix master.cf: submission inet n - - - - smtpd -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject Dovecot related: mail_location = maildir:~/Maildir passdb { args = /etc/dovecot/users.conf driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } The virtual mail user: vmail:x:444:99:virtual mail users:/var/spool/vmail:/sbin/nologin Here is the /var/log/maillog when I try to send something to myself: Oct 25 22:10:05 308321 postfix/smtpd[2200]: connect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:05 308321 postfix/smtpd[2200]: D224BD4753: client=user-999.cable.mindspring.com[99.99.99.99], sasl_method=LOGIN, [email protected] Oct 25 22:10:06 308321 postfix/cleanup[2207]: D224BD4753: message-id=<7DC3C163CFFC483AB6226F8D3D9969D2@dumbopc> Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: from=<[email protected]>, size=1385, nrcpt=1 (queue active) Oct 25 22:10:06 308321 postfix/smtpd[2200]: disconnect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:06 308321 postfix/local[2208]: D224BD4753: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=1.1, delays=0.53/0.02/0/0.51, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: removed

    Read the article

  • RJ45 female to male fault

    - by GeoPhoenix
    i have the following - common - problem, on one end of the cable, there are RJ45 males T586 A which are connected to a 8-port switcher, on the other end, there supposed to be RJ45 females _T586 A which in turn will allow another RJ45 male to be connected. the commonly used color scheme was followed on males (having the head down) blue white blue orange white green green white orange brown white brown the problem i believe is located on female end of cable, which i try multiple time to follow the numbers designated by the module, which is the list above in reverse, and as listed resulting in no signal transmission. tried the T586B (both ends) for device to device once, but no results. Which is the proper way of handling this wiring? There were also additional RJ45 females with the numbers 6-5-4-3, but 1 to 8 isn't supposed to be used for this?

    Read the article

  • MacBook Pro (with DVI) to HDMI, including audio - possible?

    - by Jason
    I have a MacBook Pro with DVI. I'd like to hook it up to my living room TV for movies and such but I want to keep it out of the way. I already have HDMI cables run to the basement where I have a cable box. Is there something I could you to connect the MBP video and audio to HDMI so I only need the one cable to the TV? I'm looking for a quality picture but I don't want to spend a ton of $. I've googled a bit, but I'm looking for some recommendations.

    Read the article

  • RGB to DVI adapter not working for Projector-to-PC

    - by user897052
    We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

    Read the article

  • Windows 7 Line In Delay Issue

    - by CheeseConQueso
    Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

    Read the article

  • Best labeler for the server room?

    - by Matt Simmons
    Right now, I've got a Brother P-touch labeler that prints four or five sizes of text on one long label. It has features such as italics and bold. It's...non-ideal. What do you use in your server room? I have heard of labelers that will print vertically as well as horizontally, or which can produce labels for cable management as well. I also think it would be great to be able to produce barcodes for my tapes (LTO-3). So basically, I would like a labeler that prints normal, can print cable labels, and can print barcodes. Unicorn optional. Any ideas, or could you even suggest the best labeler for each solution?

    Read the article

  • High fan speed after return from suspend (on Ubuntu)

    - by Bolo
    Hi, I've got a HP ProBook 5310m laptop with Ubuntu 10.04 (32 bit). When I return from suspend, the fan speed is usually very high: FDTZ sensor reports "90 °C". Yes, the units are wrong, since FDTZ does not report temperature, but fan speed – that's probably just a small bug in reporting. Interestingly, when I plug or unplug the power cable for a moment, the fan speed returns back to normal. My questions: Where can I report this problem? Is it about ACPI support in the kernel? What is the address of the relevant bug tracker? As a workaround for now, how can I programmatically trigger a behavior equivalent to (un)plugging the power cable. More generally, how can I force ACPI to recalculate fan speed? Ideally, I'm looking for something like echo foo > /proc/bar. Thanks in advance!

    Read the article

  • DVI to HDMI - displaying bad.

    - by TutorialPoint
    I currently have a computer with a ASUS EAH5770 (ATi Radeon HD 5770) 1GB GDDR5 video card, and 4GB ram, 2.6 GHZ i5 processor. I just switched from a DVI (the blue one) to an HDMI cable. (Bigben Flat cable HDMI 1.3c) I use a Samsung SyncMaster 2032 MW, which has a HDMI input. The weird thing is, that my screen is off-the-corner of the tv (so it's too wide) (1920x1080), and windows icons and text are not displaying well, though 1080p videos in YouTube are looking brilliant, just like pictures. So i think it has something to do with Windows. I already have the ATI Catalyst Control Center with the drivers i received with my video card. I do not currently know how to fix these problems. Do i have to reinstall Windows or so? Or is it (hopefully) easier?

    Read the article

  • Sound problems in Windows 7

    - by Plastkort
    hi! I hope I reached the correct forum for this question. I have a media computer with a third party audio card (Soundblaster audigy SE) I use a coaxial digital audio cable connected to a Onkyo TX SR508. if I use normal audio, the sound seems very low, I have to set volume atleast to 62 in my amplifier to hear anything, however if I set digital SPDIF I have no means of controlling the audio volume from the PC (only from the amplifier) and this can be nasty if I toggle between movies that uses Digital AC3/THX and movies wihtouth, if I look at movies capable of AC3 the volume gets VERY loud if amp is set to 62, 32 is more than enough volume when using passthrough. so this bothers me is how can I get the same amount of volume with or without digital output? I tried also other soundcards, internal red light Digital audio cable... if I connect to my television I get ok sound on any sound source via HDMI... help :)

    Read the article

  • Computer sending data while turned of

    - by Nicklas Ansman
    I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >