Search Results

Search found 1024 results on 41 pages for 'boots'.

Page 26/41 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Upgraded to a GTX 580 - no video signal on boot

  - by MGOwen

  I have: New Corsair 550w PSU (should be more than enough) AsRock H61M u3s3 mobo (with latest updated BIOS) Just replaced my faithful HD 7790 GPU with a refurbished EVGA GTX 580 1.5GB. When I boot, it sounds like the PC boots to windows, and the 580's fan is spinning, but I can't get any video signal from the card. Old card and integrated graphics still work fine (when I replace and use those instead). I am using the DVI ports on the card with a DVI-VGA adapter until I can get my hands on a mini HDMI adapter tomorrow. Anyone ever heard of a GPU needed something special to make the VGA signal work? Hold down a key on startup or something? I can't even find a manual for this card.

  Read the article

• Windows 7: How to boot up in normal mode after improper shut down?

  - by Level1Coder

  I work in two different locations and whenever there is a power outage at one of the locations, Windows 7 detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows 7 enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows 7 always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• How to fix Ubuntu 10.10 black screen from terminal?

  - by none

  I'm trying to install Ubuntu Desktop 10.10 on an Intel Atom mainboard (Intel D945GCLF2) with CRT that has been running Ubuntu 9.x previously. Both, Desktop live CD / installer and alternate install CD cause the screen to go black (and the status LED blinks). I was able to get a bit further into the boot process with nomodeset as parameter with the Live CD, unfortunately I can't pass GRUB any parameters now that I have used the alternate Install CD by pressing 'e', it just boots. So now I have Ubuntu installed, I get a terminal with CTRL-ALT-F1 but I don't know what I need to do now or how to adjust resolution or video settings from command line.

  Read the article

• Debian doesn't boot after removing secondary hard drive

  - by Daveel

  In the beginning I had Debian 6 running on one hard drive (/dev/sda1). Then I decided to keep all my stuff(pics, videos, etc..) in another slave hard drive (/dev/sdb1). So sda1 has Debian OS sdb1 doesn't contain any OS files I have made it to mount automatically by adding a row in /etc/fstab (UUID and directory to mount to) Time have passed and when I tried to change that secondary hard drive with another hard drive with bigger capacity, for some reason Debian won't boot (just itself sda1) after removing secondary hard drive (sdb1) But if I plug sdb1 back, it boots just fine. I tried to comment line out from /etc/fstab, so it doesn't mount And also did update-grub after umount /dev/sdb1 What's the right way to remove hard drive secondary hard drive?

  Read the article

• route command not being executed in rc.local

  - by user1265478

  I tried adding route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 to my Fedora rc.local file, but it's not being executed when Fedora boots up. What can I do to fix this? update: i changed to the full path cmd in my rc.local /sbin/route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 but its not being executed. I change it to sudo /sbin/route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 it still doesnt work although it works when i manually enter it in the terminal.

  Read the article

• Converting an Small Business Server to a Workstation

  - by noway

  I am planning to buy a Dell PowerEdge T110 Server and convert it to workstation similar to Dell PowerEdge Precision T1700. The reasoning behind is the cost, if I do it by myself, it costs two times cheaper. However, I wonder what might go wrong in this way? The things I have thought of are: Client OSes are not officially supported. There might be some driver problems. The chasis is designed to be a server case, so there are not many useful inputs in the front side of the case. The server boots slower than usual PCs. What might else be a problem?

  Read the article

• Asus Z8NA-D6, not powering up/no signal for monitor

  - by s093294

  I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

  Read the article

• What would Stack Exchange's yearly expenses be if it were to be using a third party host?

  - by abel

  StackExchange manages it's own servers, as it should, but if SE were to be hosted on a 3rd party "cloud" hosting (like Amazon's), what would it's monthly / yearly expenses be(keeping everything else the same)? A detailed answer comparing it to the bills that Stackexchange boots currently (including power/property/staff) would help. (PS: I know that the blog is a good resource. I also understand that managing your own hosting is almost the same as setting up a hosting company and using it for your own needs. Plus is this a question for meta or does it fit within serverfault's purview?)

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• Windows XP occasionally hangs for 2-3 minutes as the splash screen fades in.

  - by marcusw

  This is a bit of a rare problem, I have not been able to debug or fix it or find anyone else with the issue. I hope someone here can help me out. Once in a while, I boot up Windows XP from the first partition of the first disk (using grub, the computer dual-boots ubuntu) and it hangs as the Windows XP splash image fades in, leaving the screen with a dim image of the splash screen. After 2-3 minutes, it continues to boot as normal, no error messages or strange behavior. I have noticed that this happens about 75% of the time when the last time the computer was shut down it was from Ubuntu, and maybe 5-10% of the time otherwise. I have looked at system logs as far as I was able, and did not find anything the miss. What is causing this and how can I fix it?

  Read the article

• nvidia ignores the resolution listed in xorg.conf, even though I have 'nvidia-settings --load-config-only' on startup

  - by ihadanny

  when my machine boots, I see a nice 1920X1080 resolution screen, but the minute I login to my user, it's reverted to an ugly 720Xwhatever. When I run nvidia-settings and select 1920X1080, it's ok again. What am I missing??? my /etc/X11/xorg.conf contains: Section "Screen" ... Option "metamodes" "nvidia-auto-select +0+0; 1920x1080 +0+0" ... EndSection I'm using unity 3.8.16 on ubuntu 11.04, and when I check on gnome-session-properties I see that I have sh -c '/usr/bin/nvidia-settings --load-config-only on my startup.

  Read the article

• Disable RDC Welcome Screen in Windows 2008 R2

  - by mikebridge

  Is there a way to disable or bypass the "Welcome" screen I see when I'm using RDC to log in to a machine using saved credentials? I have startup task which launches an RDP session automatically to localhost when the machine boots. This works, except that the remote desktop window stops and waits for an "OK" on the Welcome screen: MACHINENAME-A.B.C.D(Server ID:Console 0) Welcome [OK] This screen is preventing me from automating this login. Is there any way to get around it? EDIT: Here's the command line I'm currently using to launch it: start /min C:\windows\system32\mstsc.exe c:\rdp\ServiceRunner.rdp

  Read the article

• Windows XP: How to boot up in normal mode after improper shut down?

  - by Nick

  I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• How to remove the pause during JBoss 5.1.0 GA boot between ProfileServiceBootstrap and AnnotationCreator?

  - by rrc7cz

  I've managed to strip down my JBoss profile enough that it boots in 1.5 minutes. I started with the web profile and started pulling out stuff I didn't need. The bulk of my boot time can be seen here: ... 15:21:51,890 INFO [ProfileServiceBootstrap] Loading profile: ProfileKey@86d597[domain=default, server=default, name=np] 15:22:55,406 WARN [AnnotationCreator] No ClassLoader provided, using TCCL: org.jboss.managed.api.annotation.ManagementComponent 15:22:55,578 WARN [AnnotationCreator] No ClassLoader provided, using TCCL: org.jboss.managed.api.annotation.ManagementComponent ... Does anyone have any idea what JBoss is doing here for 1 minute? If so, is there any way to speed it up or skip it entirely? This is for developer instances, so boot time is quite important.

  Read the article

• Will the VMs on the ESXi cluster be running after disconnection from the network?

  - by John

  What will happen if I disconnect the ESXi cluster configured with HA from the switch(I need to change the power source on the main switch) and there is no management port redundancy? I'm going to disable the host monitoring and VM monitoring within HA settings, and connect to the switch after it boots up. Will the virtual machines be running if I disconnect the hosts from the network so they will not see any other ESXi host? I hope everything will work fine and the hosts will join the cluster after they connect to the network again, but I would like to be sure ..

  Read the article

• Monitor does not turn on until reset

  - by eggonlegs

  I have a system with an ATI 4870 hooked up to a Samsung P2350 using DVI. My motherboard is a GA-EP45 DS4P with the latest BIOS. The situation is: I turn on my PC (with the power switch) I get a blank screen I hit reset and the PC boots up normally, i.e. the monitor turns on and This has been the case for a couple of months (Was away for a while, came back and it was the same case). I was hoping the situation would somehow fix itself but alas, nothing. I have tried numerous settings in the BIOS (Combinations of different settings of the ACPI and power saving options) and have tried different cables. Has anyone experienced this before? I don't know where to go from here. It is pretty infuriating because it means I can't put my computer to sleep, as the monitor won't come on. Any help is appreciated. Thanks

  Read the article

• Two NICs, one server.

  - by kobrien

  I have two NICs on a fresh install of Ubuntu 10.04 LTS. Both are config'd be dhcp. Both cards are on the same lan with same gateway. everything about the cards is the same except the IPs they get, which is what I want. What I'm trying to achieve is having both NICs operational at the same time. Currently when the server boots, it activates both NICs, but the server can't resolve any domains. If I ifdown one of them and bring it back up, the server is able to resolve domains, but the NIC I bring up won't respond to any traffic. Any ideas?

  Read the article

• Timing startup processes?

  - by acidzombie24

  My Windows 7 use to boot up fast and now its getting rather slow. I suspect one program is eating up all the time yet i cant tell what it is since task manager shows <40% of the cpu being used. What can i use to track how long each process takes when my computer boots/starts up? Note: Except for launchy which i used before my comp became slow, all my startup and services are all signed and known (broadcom, VMWare, Google Inc, Intel, etc) Note2: I am mostly considering the time it takes after i login but i suspect the time before that is slightly slower (i dont think very much though)

  Read the article

• Third monitor randomly defaults to 640 x 480 on startup

  - by ajbdev

  I purchased a PowerColor HD 5770 video card so I could get a third monitor working. I have two widescreen monitors, one attached via HDMI and the other attached via DVI. My third monitor is attached from DisplayPort to VGA (using a passive connector like this one) The third monitor is a 19" Hyundai L90D. I was unable to find any Windows 7 (or Vista for that matter) drivers for the monitor, so it's stuck with "Generic Non-PNP Monitor". It's native resolution is 1280 x 1024. Randomly Windows will boot up in the correct native res, but sometimes it boots up in 640 x 480 res. When it does boot up into 640 x 480 res, the screen resolution slider is stuck and I cannot slide it back to 1280 x 1024. I cannot find a pattern for when or why it will do this, I've tried rebooting five or six times in a row at times to get it to boot into native res, but this doesn't always work.

  Read the article

• RAID 1 in ubuntu 12.04

  - by Bavly Hanna

  Right now I have a small file server to which I have loaded ubuntu 12.04 desktop on a small 160gb harddrive. This harddrive is the primary drive from which the OS boots. I want to move all my data to my file server so it can be shared on the network (contain in 2x2TB harddrives in my desktop. The 2TB drivers are in raid 1 (hardware). I simply want to move them to the file server and set it up so that they are in software raid 1. If at all possible I'd like to be able to do this without losing any info on the drives. I've searched around and the guides i find describe raiding drives for boot driver, but these wouldn't be boot drives just regular storage drives. If someone could tell me how to perform this or point me in the right direction it would be much appreciated.

  Read the article

• How to prevent Windows 8 of erasing GRUB?

  - by dirleyrls

  I'm doing dualboot with Ubuntu and Windows 8 on my DELL Laptop. EFI is enabled, secure boot is not. My partitions are GPT. Everything seems to work for some time. After some normal use, GRUB stops working. The "ubuntu" EFI entry is still there on top of everything else. But the computer boots directly into the Windows Bootloader, skipping GRUB. Any clues on why is that happening or how can I prevent that? My current partiton setup is: - /dev/sda1 NTFS Windows recovery - /dev/sda2 FAT32 UEFI boot (with boot flag) - /dev/sda3 unknown (msftres flag) - /dev/sda4 NTFS Windows Drive C - /dev/sda5 ext4 /home - /dev/sda6 ext4 / I usually reinstall GRUB through chrooting from a Live Session and doing a apt-get install --reinstall grub-efi-amd64.

  Read the article

• USB-based AV application that restores compromised Windows files from CD/DVD?

  - by overtherainbow

  Hello I just tried a couple of rescue disks (AVG and Kaspersky), and I was wondering if someone knew of a solution that would work like this: The AV solution boots from a USB key, and works entirely from RAM (where the latest virus DB is downloaded) The user inserts his Windows CD/DVD in the drive If any Windows file is compromised, the AV application fetches a clean version from the CD/DVD and restores it on the hard drive optionally, any compromised drive/user-land application is quarantied, and it is up to the user to reinstall those after he successfully rebooted into a restored Windows setup Have you heard of a solution like this? It seems silly to reinstall a whole Windows computer just because one or a few system files were compromised. Thank you.

  Read the article

• Can I set osx to boot with several spaces containing a different set of apps in each?

  - by Jay

  When my system boots I would love to have it to create three spaces: First Space: email and things (my to do list program) Second Space: textmate and a browser containing first site I am developing Third Space: textmate and a browser containing my second site Is it possible to set it up to do that each time? I'd prefer not to use the reopen windows option on shutdown because most days I have a bunch of things open that I won't need the next day. Thanks. UPDATE: I found TotalSpaces2 and it will open all the same spaces when I reboot. I suppose that I might need some kind of hack to get the applications to start in the appropriate space at boot.

  Read the article

• Deleting Windows 8 install

  - by Yann4

  I have a windows 7 pc, and I had installed windows 8 on an SSD, so it was the only partition on that SSD. I've now realised that I never use it, so I went to uninstall it and followed these steps. The PC now boots into 7, as expected, however I can't delete or format the drive that has windows 8 on it. The format dropdown selection is greyed out, and I tried to just simply delete all of the files and use the disk as is, but as windows 8 isn't there, I no longer have rights to delete all of the files, apparently. The drive in question has 3 partitions, one that I made for the win8 system, and 2 smaller system-created partitions (one 300MB recovery and 1 100MB EFI) How do I go about formatting the drive?

  Read the article

• Converted VmWare Image does not boot in Virtual Box

  - by vBox Question

  I have a .vddx virtual image which boots in VmWare, but I'm having trouble getting it to work with Sun Virtual Box. In Sun Virtual Box, I created a new Virtual Machine and pointed it at the vddx file from VmWare. When I try to boot the virtual machine, Sun Virtual Box says that the volume is not bootable. VmWare is able to boot from this virtual machine. Does anyone have any suggestions about what might be causing the problem? Is there a conversion utility that I need to run? Any debugging options that I could turn on?

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >