Search Results

Search found 705 results on 29 pages for 'cfg'.

Page 26/29 | < Previous Page | 22 23 24 25 26 27 28 29  | Next Page >

• Plymouth and GRUB do not show at all

  - by WarriorIng64

  I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

  Read the article

• Non-standard installation (installing Linux from Linux)

  - by Evan Plaice

  So, here's my setup. I have one partition with the newest version installed, a second partition with an older version installed (as a backup just in case), a swap partition that both share, and a boot partition so the bootloader doesn't need to be setup after each upgrade. Partitions: sda1 ext3 /boot sda2 ext4 / (current version) sda3 ext4 / (old version) sda4 swap /swap sda5 ntfs (contains folders symbolically linked to /home on /) So far it has been a very good setup. I can create new boot loaders without screwing it up and adding my personal files into a new install is as simple as creating some symbolic links (the partition is NTFS in case I need to load windows on the system again). Here's the issue. I'd like to be able to drop the install into /distro on the current version and install a new version on / on the old version effectively replacing/upgrading it. The goal is to be able to just swap out new versions as they are released while maintaining redundancy in case I don't like th update. So far I have: downloaded the install.iso created a folder in /distro copied the install.iso into /distro extracted vmlinuz and initrd.lz into /distro Then I modified /boot/grub/menu.lst with the following entry: title Install Linux root (hd0,1) kernel /distro/vmlinuz initrd /distro/initrd.lz vmlinuz loads perfectly but it says it can't find initrd.lz on boot. I have also tried to uncompress the image with: unlzma < initrd.lz > initrd.img And, updating the menu.lst file to match; but that doesn't work either. I'm assuming that vmlinuz (linux kernel) loads, fires up the virtual filesystem by creating a ramdisk (initrd), mounts the iso, and launches the installer. Am I missing something here? Update: First, I wanted to say that the accepted answer would have been the best option if I was doing a normal Ubuntu install. Unfortunately, I was installing Linux Mint (which lacks the script needed to make debootstrap work. So the problem I with the above approach was, I was missing the command that vmlinuz (linux kernel) needed to execute to start boot into LiveCD mode. By looking in the /boot/grub/grub.cfg file I found what I was missing. Although this method will work, it requires that the installation files reside on their own partition. I took the easy route and used unetbootin to drop the LiveCD on a usb drive and booted from that. Like I said before. Debootstrap would have been the ideal solution here. Even though I couldn't use it I wrote down the steps it would've taken to use it. Step One: Format sda3 (the partition with the old copy of linux that's being overwritten) I used gparted to format it as ext4 from within the current linux install. How this is done varies based on what tools you prefer to use. Step Two: Mount the newly formatted partition (we'll call the mount ubuntu for simplicity) sudo mkdir /mnt/ubuntu sudo mount -o -loop /dev/sda3 /mnt/ubuntu Step Three: Get debootstrap sudo apt-get install debootstrap Step Four: Mount the install disk (replace ubuntu.iso with the name if your install disk) sudo mkdir /media/cdrom sudo mount -o loop ~/ubuntu.iso /media/cdrom Step Five: Install the OS using debootstrap (replace fiesty with the version you're installing and amd64 with your processor's architecture) sudo debootstrap --arch amd64 fiesty /mnt/ubuntu file:/media/cdrom The settings here varies. While I loaded debootstrap using an install iso, you can also have debootstrap automatically download and install if with a repository link (While most of these repositories contain debian versions I'm still not clear as to whether Ubuntu has similar repositories). Here a list of the debian package repositories and their mirrors. This is how you'd deploy debootstrap if you were doing it directly from a repository: sudo debootstrap --arch amd64 squeeze /mnt/debian http://ftp.us.debian.org/debian Here's the link that I primarily used to figure this out.

  Read the article

• Removing old kernel entries in Grub

  - by To Do

  I regularly delete old kernels leaving only the latest two entries using Synaptic. I'm using Precise. However in my Grub "previous Linux version" menu there are quite a few entries labelled 2.6.8. I cannot find these linux-images in Synaptic. dpkg -l | grep linux-image Gives: rc linux-image-3.0.0-17-generic 3.0.0-17.30 Linux kernel image for version 3.0.0 on x86/x86_64 ii linux-image-3.2.0-27-generic 3.2.0-27.43 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.2.0-29-generic 3.2.0-29.46 Linux kernel image for version 3.2.0 on 32 bit x86 SMP ii linux-image-3.4.0-030400-generic 3.4.0-030400.201205210521 Linux kernel image for version 3.4.0 on 32 bit x86 SMP ii linux-image-generic 3.2.0.29.31 Generic Linux kernel image Sudo update-grub gives: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.4.0-030400-generic Found initrd image: /boot/initrd.img-3.4.0-030400-generic Found linux image: /boot/vmlinuz-3.2.0-29-generic Found initrd image: /boot/initrd.img-3.2.0-29-generic Found linux image: /boot/vmlinuz-3.2.0-27-generic Found initrd image: /boot/initrd.img-3.2.0-27-generic Found linux image: /boot/vmlinuz-2.6.38-11-generic Found initrd image: /boot/initrd.img-2.6.38-11-generic Found linux image: /boot/vmlinuz-2.6.38-10-generic Found initrd image: /boot/initrd.img-2.6.38-10-generic Found linux image: /boot/vmlinuz-2.6.38-8-generic Found initrd image: /boot/initrd.img-2.6.38-8-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows Vista (loader) on /dev/sda1 sudo apt-get remove linux-image-2.6.8-8-generic gives: E: Unable to locate package linux-image-2.6.8-8-generic E: Couldn't find any package by regex 'linux-image-2.6.8-8-generic' My boot folder contains the following: abi-2.6.38-10-generic initrd.img-3.4.0-030400-generic abi-2.6.38-11-generic memtest86+.bin abi-2.6.38-8-generic memtest86+_multiboot.bin abi-3.2.0-27-generic System.map-2.6.38-10-generic abi-3.2.0-29-generic System.map-2.6.38-11-generic abi-3.4.0-030400-generic System.map-2.6.38-8-generic config-2.6.38-10-generic System.map-3.2.0-27-generic config-2.6.38-11-generic System.map-3.2.0-29-generic config-2.6.38-8-generic System.map-3.4.0-030400-generic config-3.2.0-27-generic vmcoreinfo-2.6.38-10-generic config-3.2.0-29-generic vmcoreinfo-2.6.38-11-generic config-3.4.0-030400-generic vmcoreinfo-2.6.38-8-generic extlinux vmlinuz-2.6.38-10-generic grub vmlinuz-2.6.38-11-generic initrd.img-2.6.38-10-generic vmlinuz-2.6.38-8-generic initrd.img-2.6.38-11-generic vmlinuz-3.2.0-27-generic initrd.img-2.6.38-8-generic vmlinuz-3.2.0-29-generic initrd.img-3.2.0-27-generic vmlinuz-3.4.0-030400-generic initrd.img-3.2.0-29-generic and ls -l /etc/grub.d yields: total 56 -rwxr-xr-x 1 root root 6715 Apr 17 20:16 00_header -rwxr-xr-x 1 root root 5522 Oct 1 2011 05_debian_theme -rwxr-xr-x 1 root root 7407 May 17 09:22 10_linux -rwxr-xr-x 1 root root 6335 Apr 17 20:16 20_linux_xen -rwxr-xr-x 1 root root 1588 May 3 2011 20_memtest86+ -rwxr-xr-x 1 root root 7603 Apr 17 20:16 30_os-prober -rwxr-xr-x 1 root root 214 Oct 1 2011 40_custom -rwxr-xr-x 1 root root 95 Oct 1 2011 41_custom -rw-r--r-- 1 root root 483 Oct 1 2011 README gdisk -l /dev/sda yields: Partition table scan: MBR: MBR only BSD: not present APM: not present GPT: not present *************************************************************** Found invalid GPT and valid MBR; converting MBR to GPT format. *************************************************************** Disk /dev/sda: 312581808 sectors, 149.1 GiB Logical sector size: 512 bytes Disk identifier (GUID): F832A498-05E1-4615-B5B1-757ACB4A757A Partition table holds up to 128 entries First usable sector is 34, last usable sector is 312581774 Partitions will be aligned on 2048-sector boundaries Total free space is 4183661 sectors (2.0 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 61442047 29.3 GiB 0700 Microsoft basic data 3 163842048 169986047 2.9 GiB 8200 Linux swap 4 169986048 312578047 68.0 GiB 0700 Microsoft basic data 5 61444096 159666175 46.8 GiB 8300 Linux filesystem Please help with removing the old and inexistent kernels from Grub.

  Read the article

• Bluetooth not found on BCM43228

  - by TK Kocheran

  I've got a Broadcom BCM43228 mPCIe card which came with my motherboard (ASUS ROG Maximus V Extreme, can't seem to find a link to what the card is) which is working great for WiFi right now, but I can't detect the Bluetooth hardware onboard. In Windows, I have full Bluetooth 4.0 support. $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1c.6 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 7 (rev c4) 00:1c.7 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 8 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1189 (rev a1) 01:00.1 Audio device: NVIDIA Corporation Device 0e0a (rev a1) 0d:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 10:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 12:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n 17:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) The key line seems to be: 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n If I try to detect the Bluetooth card, I don't see anything: $ hcitool dev Devices: rfkill list all: Output lspci: Output lsusb: Output I finally found the card with usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17b5 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=############ C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) I've heard that this card needs to have firmware injected into it in order to function. If that's the case, how do I do it?

  Read the article

• Barcodes and Bugs

  - by Tim Dexter

  A great mail from Mike at Browning last week. He has been through the ringer getting his BIP barcoding sorted out but he's now out of the woods. Here's the final result. By way of explanation, an excerpt from Mike's email:   This is an example of the GS1_128 carton shipping labels we are now producing with BIP in our web application for our vendors who drop ship products to our dealers. It produces 4 labels per printed page, in PDF format, on peel & stick label paper. Each label has a unique carton number, and a unique carton serial number in the SSCC-18 barcode. This example is for Cabelas (each customer has slightly different GS1-128 label format requirements – custom template for each - a pain!). I am using custom java encoders I wrote for the UPC and SSCC-18 barcodes, and a standard encoder (code128b) for the ShipTo zip barcode. Is there any way yet to get around that SUPER ANNOYING bug when opening the rtf template in MS Word, and it replaces my xsl code text in the barcode fields with gibberish??? Every time I open it I have to re-enter all the xsl code. Not only to be able to read & edit it, but also to get it to work in BIP (BIP doesn’t like the gibberish if I upload the template that has it). Mike's last point, regarding the annoying bug in the template builder, is one that I have experienced occasionally. The development team have looked at it and found it to be an issue with MSWord and not a plugin problem. That's all well and good but how can you get around it? Well, you can take advantage of the font mapping that BIP offers to get the barcodes into the PDF output. As many of you know, getting a barcode font to appear in the PDF output, you need employ the use of the xdo.cfg file in the template builder config directory.You would normally have an entry such as this:         <font family="Code 128" style="normal" weight="normal">        <truetype path="C:\windows\fonts\128R00.TTF" />       </font>to map a barcode font to get it to render in the PDF output when testing from the template builder plugin.   Mike's issue is only present when the formfield is highlighted with a barcode font. The other fields in the template are OK. What you can do to get around the issue is to bend the config entry to get around having to use the barcode font in the template at all. Changing the entry to something like:         <font family="Calibri" style="normal" weight="normal">        <truetype path="C:\windows\fonts\128R00.TTF" />       </font>   Note that we are mapping the Calibri; a humanly readable and non 'erroring' font in the template, to the code 128 barcode font. Where you used to highlight the field with the barcode in MSWord, you now use the Calibri font instead. At run time, BIP will go look for the Calibri font mapping and will drop in the Code128 font. Of course, Calibri is an example; you need to pick a font that you are not going to use any where else in the layout.

  Read the article

• Ubuntu 10.04 and fedora 14 grub conflict

  - by sawren

  I tried to triple boot Windows xp, Fedora 14 and Ubuntu 10.04. I first installed Windows xp, then fedora followed by Ubuntu. The problem is that i don't get option to boot Ubuntu while Xp boots fine. It seems Ubuntu was unable to replace Fedora's grub with its own at MBR. Looking at their grub conf file, Fedora and Ubuntu identifies same harddisk as two different devices and i do have another 80 GB harddisk which doesn't have any OS. Below is the details on my partitions and partial information from grub files of both OS. Device Boot Start End Blocks Id System /dev/sda1 * 63 40965749 20482843+ 7 HPFS/NTFS /dev/sda2 102414436 312576704 105081134+ f W95 Ext'd (LBA) /dev/sda3 40965750 102414374 30724312+ 83 Linux - /Home (for fedora) /dev/sda5 102414438 204812684 51199123+ 7 HPFS/NTFS /dev/sda6 204812748 253634219 24410736 83 Linux -- ubuntu /dev/sda7 253634283 302455754 24410736 83 Linux -- fedora /dev/sda8 302455818 312576704 5060443+ 82 Linux swap / Solaris grub.cfg from ubuntu ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 ro quiet splash initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd1,7)' search --no-floppy --fs-uuid --set cd55e078-a2c1-4d8a-9e87-ae838b6f4a05 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sdb1)" { insmod ntfs set root='(hd1,1)' search --no-floppy --fs-uuid --set cad48cc6d48cb5eb drivemap -s (hd0) ${root} chainloader +1 } menuentry "Fedora (2.6.35.14-96.fc14.i686) (on /dev/sdb6)" { insmod ext2 set root='(hd1,6)' search --no-floppy --fs-uuid --set 6aee34cf-f77a-489a-9361-85d07194b84b linux /boot/vmlinuz-2.6.35.14-96.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.14-96.fc14.i686.img } menuentry "Fedora (2.6.35.6-45.fc14.i686) (on /dev/sdb6)" { insmod ext2 set root='(hd1,6)' search --no-floppy --fs-uuid --set 6aee34cf-f77a-489a-9361-85d07194b84b linux /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img } ### END /etc/grub.d/30_os-prober ### grub.conf from fedora default=0 timeout=5 splashimage=(hd0,5)/boot/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.35.14-96.fc14.i686) root (hd0,5) kernel /boot/vmlinuz-2.6.35.14-96.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.14-96.fc14.i686.img title Fedora (2.6.35.6-45.fc14.i686) root (hd0,5) kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=6aee34cf-f77a-489a-9361-85d07194b84b rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img title Other rootnoverify (hd0,0) chainloader +1

  Read the article

• How do I configure WakeOnUSB properly?

  - by wishi

  How do I configure Wake-On-USB properly on a 10.04 or 10.10 Ubuntu (2.6.36 and higher if needed)? (Wake-on-USB is when the computer is asleep and for example a USB Keyboard event wakes up the machine!) The notebook is an Acer Aspire Timeline X 1830T. I don't know in which way the Linux Kernel supports the controllers. There are different ways to approach this, for example /proc/acpi/wakeup... or UDEV... or something with HAL? /proc/acpi/wakeup shows every device in S4, but I need S3. Device S-state Status Sysfs node P0P2 S4 *disabled PEGP S4 *disabled P0P1 S0 *disabled pci:0000:00:1e.0 EHC1 S4 *disabled pci:0000:00:1d.0 USB1 S4 *enabled USB2 S4 *disabled USB3 S4 *disabled USB4 S4 *disabled EHC2 S4 *disabled pci:0000:00:1a.0 USB5 S4 *disabled USB6 S4 *disabled USB7 S4 *disabled HDEF S0 *disabled pci:0000:00:1b.0 RP01 S5 *disabled pci:0000:00:1c.0 PXSX S5 *disabled pci:0000:01:00.0 RP02 S0 *disabled pci:0000:00:1c.1 PXSX S5 *disabled pci:0000:02:00.0 RP03 S0 *disabled PXSX S5 *disabled RP04 S0 *disabled PXSX S5 *disabled RP05 S0 *disabled PXSX S5 *disabled RP07 S0 *disabled PXSX S5 *disabled RP08 S0 *disabled PXSX S5 *disabled GLAN S0 *disabled PEG3 S4 *disabled PEG5 S4 *disabled PEG6 S4 *disabled SLPB S3 *enabled S4, which is Suspend-To-Disk afaik... doesn't seem to work either if I echo USB1 into the wakeup table. It just sets an S4 flag. can I get the USB ports in S3? I want to make the machine wakeup from Suspend-To-Ram (S3, ACPI standard) in case a key on my external keyboard is pressed. It only wakes up if a key on the internal Laptop keyboard is pressed... from Suspend To Ram. It seems if I plug in a USB mouse, that the USB port isn't even powered. I have no BIOS option to change this. Further specific information regarding the device: usb-devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04d9 ProdID=1603 Rev=03.10 S: Manufacturer= S: Product=USB Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid root@underwater-laptop:/# lsusb [...] Bus 001 Device 013: ID 04d9:1603 Holtek Semiconductor, Inc. Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [...] If this doesn't work I have to properly explain why :( - but I think it is very hard to research this kernel internal. Any hints for good information here? I hope it's possible... I'm just looking for any solution. edit: this, waking up on USB, works on Windows! Thanks a lot, Marius

  Read the article

• nvidia driver problems after upgrading to 3.2.0-26 on Ubuntu 12.04 64bit

  - by Lev Levitsky

  After installing latest updates I can't set screen resolution higher than 1024x768; every time after the boot I get a message Could not apply the stored configuration for the monitors (Note: removing ~/.config/monitors.xml stopped the message, but not the problem) I can boot with 3.2.0-25 and the graphics look normal. Here's what I have in /var/log/apt/term.log (excerpt): Setting up linux-image-3.2.0-26-generic (3.2.0-26.41) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic update-initramfs: Generating /boot/initrd.img-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found linux image: /boot/vmlinuz-3.2.0-25-generic Found initrd image: /boot/initrd.img-3.2.0-25-generic Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found linux image: /boot/vmlinuz-3.0.0-17-generic Found initrd image: /boot/initrd.img-3.0.0-17-generic Found memtest86+ image: /boot/memtest86+.bin I went to "additional drivers" and saw some updates available there, but an attempt to install them failed, leaving the following in /var/log/jockey.log (long log, pasted here). The full log won't fit in the question, so I'm showing $ fgrep 'ERROR' /var/log/jockey.log 2012-06-30 17:29:57,897 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-06-30 17:29:57,937 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-06-30 17:29:58,072 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-06-30 17:29:58,240 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:58,293 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:29:58,351 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:58,385 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:58,420 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-06-30 17:29:58,455 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-06-30 17:29:58,478 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-06-30 17:29:58,531 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-06-30 17:29:58,588 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-06-30 17:29:59,537 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:59,613 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:59,686 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:59,764 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,544 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,545 ERROR: XorgDriverHandler.enable(): package or module not installed, aborting I'm not sure if it's a bug, as the first log shows some errors. What can I try?

  Read the article

• Grub2 : Windows 7 can't boot installing with Ubuntu 10.04 on different hard drive

  - by dellphi

  I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. ================ fdisk -l ================================ dellph1@dellph1-desktop:~$ fdisk -l omitting empty partition (5) Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00087dec Device Boot Start End Blocks Id System /dev/sda1 * 1 23104 185582848+ 7 HPFS/NTFS /dev/sda2 23105 121601 791177122 5 Extended /dev/sda5 36107 74408 307660783+ 7 HPFS/NTFS /dev/sda6 74409 100081 206218341 7 HPFS/NTFS /dev/sda7 100082 121601 172859368+ 7 HPFS/NTFS Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6d43dfb2 Device Boot Start End Blocks Id System /dev/sdb1 1 10030 80560066 5 Extended /dev/sdb5 * 1 5560 44657601 83 Linux /dev/sdb6 5560 9387 30736384 83 Linux /dev/sdb7 9387 10030 5164032 82 Linux swap / Solaris dellph1@dellph1-desktop:~$ ================= grub.cfg ================== # DO NOT EDIT THIS FILE # It is automatically generated by /usr/sbin/grub-mkconfig using templates from /etc/grub.d and settings from /etc/default/grub # BEGIN /etc/grub.d/00_header if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=5 fi END /etc/grub.d/00_header BEGIN /etc/grub.d/05_debian_theme insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 insmod jpeg if background_image /usr/share/backgrounds/CurlsbyCandy.jpg ; then set color_normal=white/black set color_highlight=black/light-gray else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi END /etc/grub.d/05_debian_theme BEGIN /etc/grub.d/10_linux menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 linux /boot/vmlinuz-2.6.32-24-generic root=UUID=2f014a3a-35f3-4d05-87aa-34ca677160b7 ro splash vga=795 quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap initrd /boot/initrd.img-2.6.32-24-generic } menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,5)' search --no-floppy --fs-uuid --set 2f014a3a-35f3-4d05-87aa-34ca677160b7 echo 'Loading Linux 2.6.32-24-generic ...' linux /boot/vmlinuz-2.6.32-24-generic root=UUID=2f014a3a-35f3-4d05-87aa-34ca677160b7 ro single splash vga=795 echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-24-generic } END /etc/grub.d/10_linux BEGIN /etc/grub.d/30_os-prober menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod ntfs set root='(hd0,1)' search --no-floppy --fs-uuid --set 5cac2139ac210f58 chainloader +1 } END /etc/grub.d/30_os-prober BEGIN /etc/grub.d/40_multisystem Ajout de MultiSystem MULTISYSTEM MENU menuentry "PLoP Boot Manager" { linux16 /boot/plpbt } menuentry "Smart Boot Manager" { search --set -f /boot/sbootmgr.dsk linux16 /boot/memdisk initrd16 /boot/sbootmgr.dsk } FIN MULTISYSTEM MENU END /etc/grub.d/40_multisystem ================================================ I want to keep the Grub on the second HDD. I have been using the Startup Manager, Boot Manager and Grub Customizer, and this problem still unsolved. The easiest thing that I can possibly do is to install Grub on first HDD, but I was curious and maybe someone can help.

  Read the article

• Linux Mint 10 LXDE computer to act as LTSP Server without luck

  - by Rautamiekka

  So I've tried to make our screen-broken HP laptop to also serve as LTSP Server in addition to various other tasks, without luck, which may be cuz I'm running LM10 LXDE while the instructions are for Ubuntu. Excuse my ignorance. The entire output from Terminal after installing LTSP stuff along with a Server kernel and a load of other packages: administrator@rauta-mint-turion ~ $ sudo lt ltrace ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-kernels find: `/opt/ltsp/': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo ltsp-update-image Cannot determine assigned port. Assigning to port 2000. mkdir: cannot create directory `/opt/ltsp/i386/etc/ltsp': No such file or directory /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent Regenerating kernel... chroot: failed to run command `/usr/share/ltsp/update-kernels': No such file or directory Done. Configuring inetd... Done. Updating pxelinux default configuration...Done. Skipping invalid chroot: /opt/ltsp/i386 chroot: failed to run command `test': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-chroot chroot: failed to run command `/bin/bash': No such file or directory administrator@rauta-mint-turion ~ $ bash administrator@rauta-mint-turion ~ $ exit exit administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp i386 administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp/i386 removed directory: `/opt/ltsp/i386' administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ aptitude search ltsp p fts-ltsp-ldap - LDAP LTSP module for the TFTP/Fuse supplicant p ltsp-client - LTSP client environment p ltsp-client-core - LTSP client environment (core) p ltsp-cluster-accountmanager - Account creation and management daemon for LTSP p ltsp-cluster-control - Web based thin-client configuration management p ltsp-cluster-lbagent - LTSP loadbalancer agent offers variables about the state of the ltsp server p ltsp-cluster-lbserver - LTSP loadbalancer server returns the optimal ltsp server to terminal p ltsp-cluster-nxloadbalancer - Minimal NX loadbalancer for ltsp-cluster p ltsp-cluster-pxeconfig - LTSP-Cluster symlink generator p ltsp-controlaula - Classroom management tool with ltsp clients p ltsp-docs - LTSP Documentation p ltsp-livecd - starts an LTSP live server on an Ubuntu livecd session p ltsp-manager - Ubuntu LTSP server management GUI i A ltsp-server - Basic LTSP server environment i ltsp-server-standalone - Complete LTSP server environment i A ltspfs - Fuse based remote filesystem for LTSP thin clients p ltspfsd - Fuse based remote filesystem hooks for LTSP thin clients p ltspfsd-core - Fuse based remote filesystem daemon for LTSP thin clients p python-ltsp - provides ltsp related functions administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server ltsp-server-standalone ltspfs The following packages will be REMOVED: debconf-utils{u} debootstrap{u} dhcp3-server{u} gstreamer0.10-pulseaudio{u} ldm-server{u} libpulse-browse0{u} ltsp-server{p} ltsp-server-standalone{p} ltspfs{p} nbd-server{u} openbsd-inetd{u} pulseaudio{u} pulseaudio-esound-compat{u} pulseaudio-module-x11{u} pulseaudio-utils{u} squashfs-tools{u} tftpd-hpa{u} 0 packages upgraded, 0 newly installed, 17 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 6,996kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158454 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 158195 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing dhcp3-server ... * Stopping DHCP server dhcpd3 [ OK ] Removing gstreamer0.10-pulseaudio ... Removing ldm-server ... Removing pulseaudio-module-x11 ... Removing pulseaudio-esound-compat ... Removing pulseaudio ... * PulseAudio configured for per-user sessions Removing pulseaudio-utils ... Removing libpulse-browse0 ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 157944 files and directories currently installed.) Removing ltspfs ... Processing triggers for man-db ... (Reading database ... 157932 files and directories currently installed.) Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Removing tftpd-hpa ... tftpd-hpa stop/waiting Processing triggers for ureadahead ... Processing triggers for man-db ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: dhcp3-server{p} libpulse-browse0{p} nbd-server{p} openbsd-inetd{p} pulseaudio{p} tftpd-hpa{p} 0 packages upgraded, 0 newly installed, 6 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157881 files and directories currently installed.) Removing dhcp3-server ... Purging configuration files for dhcp3-server ... Removing libpulse-browse0 ... Purging configuration files for libpulse-browse0 ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Removing pulseaudio ... Purging configuration files for pulseaudio ... Removing tftpd-hpa ... Purging configuration files for tftpd-hpa ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... Setting up openbsd-inetd (0.20080125-4ubuntu2) ... * Stopping internet superserver inetd [ OK ] * Starting internet superserver inetd [ OK ] Selecting previously deselected package ldm-server. (Reading database ... 157877 files and directories currently installed.) Unpacking ldm-server (from .../ldm-server_2%3a2.1.3-0ubuntu1_all.deb) ... Selecting previously deselected package debconf-utils. Unpacking debconf-utils (from .../debconf-utils_1.5.32ubuntu3_all.deb) ... Selecting previously deselected package debootstrap. Unpacking debootstrap (from .../debootstrap_1.0.23ubuntu1_all.deb) ... Selecting previously deselected package nbd-server. Unpacking nbd-server (from .../nbd-server_1%3a2.9.14-2ubuntu1_i386.deb) ... Selecting previously deselected package squashfs-tools. Unpacking squashfs-tools (from .../squashfs-tools_1%3a4.0-8_i386.deb) ... Selecting previously deselected package ltsp-server. GNU nano 2.2.4 File: /etc/ltsp/ltsp-update-image.conf # Configuration file for ltsp-update-image # By default, do not compress the image # as it's reported to make it unstable NO_COMP="-noF -noD -noI -no-exports" [ Switched to /etc/ltsp/ltsp-update-image.conf ] administrator@rauta-mint-turion ~ $ ls /opt/ firefox/ ltsp/ mint-flashplugin/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/ i386 administrator@rauta-mint-turion ~ $ sudo ltsp ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ ^C administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp ltspfs ltsp-server ltsp-server-standalone administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server The following packages will be REMOVED: ltsp-server{p} 0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 1,073kB will be freed. The following packages have unmet dependencies: ltsp-server-standalone: Depends: ltsp-server but it is not going to be installed. The following actions will resolve these dependencies: Remove the following packages: 1) ltsp-server-standalone Accept this solution? [Y/n/q/?] The following packages will be REMOVED: debconf-utils{u} debootstrap{u} ldm-server{u} ltsp-server{p} ltsp-server-standalone{a} ltspfs{u} nbd-server{u} openbsd-inetd{u} squashfs-tools{u} 0 packages upgraded, 0 newly installed, 9 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 2,437kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158244 files and directories currently installed.) Removing ltsp-server-standalone ... (Reading database ... 158240 files and directories currently installed.) Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 157987 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing ldm-server ... Removing ltspfs ... Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Processing triggers for man-db ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: ltsp-server-standalone{p} nbd-server{p} openbsd-inetd{p} 0 packages upgraded, 0 newly installed, 3 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157871 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/t teamspeak-server/ tftpboot/ transmission-daemon/ administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/tftpboot removed `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg/default' removed directory: `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg' removed directory: `/var/lib/tftpboot/ltsp/i386' removed directory: `/var/lib/tftpboot/ltsp' removed directory: `/var/lib/tftpboot' administrator@rauta-mint-turion ~ $ sudo find / -name "ltsp" /opt/ltsp administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp removed directory: `/opt/ltsp/i386' removed directory: `/opt/ltsp' administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... GNU nano 2.2.4 New Buffer GNU nano 2.2.4 File: /etc/ltsp/dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } [ Wrote 22 lines ] administrator@rauta-mint-turion ~ $ sudo service dhcp3-server start * Starting DHCP server dhcpd3 [ OK ] administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo cat /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging case "$MODE" in after-install) echo LTSP_CHROOT=$ROOT >> $ROOT/etc/ltsp_chroot ;; esac administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ltsp_chroot bash: cd: /etc/ltsp_chroot: No such file or directory administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ administrator@rauta-mint-turion /etc $ ls acpi chatscripts emacs group insserv.conf.d logrotate.conf mysql php5 rc6.d smbnetfs.conf UPower adduser.conf ConsoleKit environment group- iproute2 logrotate.d nanorc phpmyadmin rc.local snmp usb_modeswitch.conf alternatives console-setup esound grub.d issue lsb-base nbd-server pm rcS.d sound usb_modeswitch.d anacrontab cron.d firefox gshadow issue.net lsb-base-logging.sh ndiswrapper pnm2ppa.conf request-key.conf ssh ushare.conf apache2 cron.daily firefox-3.5 gshadow- java lsb-release netscsid.conf polkit-1 resolvconf ssl vga apm cron.hourly firestarter gtk-2.0 java-6-sun ltrace.conf network popularity-contest.conf resolv.conf sudoers vim apparmor cron.monthly fonts gtkmathview kbd ltsp NetworkManager ppp rmt sudoers.d vlc apparmor.d crontab foomatic gufw kernel lxdm networks printcap rpc su-to-rootrc vsftpd.conf apport cron.weekly fstab hal kernel-img.conf magic nsswitch.conf profile rsyslog.conf sweeprc w3m apt crypttab ftpusers hdparm.conf kerneloops.conf magic.mime ntp.conf profile.d rsyslog.d sysctl.conf wgetrc at.deny cups fuse.conf host.conf kompozer mailcap obex-data-server protocols samba sysctl.d wildmidi auto-apt dbconfig-common gai.conf hostname ldap mailcap.order ODBCDataSources psiconv sane.d teamspeak-server wodim.conf avahi dbus-1 gamin hosts ld.so.cache manpath.config odbc.ini pulse screenrc terminfo wpa_supplicant bash.bashrc debconf.conf gconf hosts.allow ld.so.conf menu openal purple securetty thunderbird X11 bash_completion debian_version gdb hosts.deny ld.so.conf.d menu-methods openoffice python security timezone xdg bash_completion.d default gdm hp legal mime.types opt python2.6 sensors3.conf transmission-daemon xml bindresvport.blacklist defoma ghostscript ifplugd lftp.conf mke2fs.conf pam.conf python2.7 sensors.d ts.conf xulrunner-1.9.2 blkid.conf deluser.conf gimp inetd.conf libpaper.d modprobe.d pam.d python3.1 services ucf.conf zsh_command_not_found blkid.tab depmod.d gnome init libreoffice modules pango rc0.d sgml udev bluetooth dhcp gnome-system-tools init.d linuxmint motd papersize rc1.d shadow ufw bonobo-activation dhcp3 gnome-vfs-2.0 initramfs-tools locale.alias mplayer passwd rc2.d shadow- updatedb.conf ca-certificates dictionaries-common gnome-vfs-mime-magic inputrc localtime mtab passwd- rc3.d shells update-manager ca-certificates.conf doc-base gre.d insserv logcheck mtab.fuselock pcmcia rc4.d skel update-motd.d calendar dpkg groff insserv.conf login.defs mtools.conf perl rc5.d smb2www update-notifier administrator@rauta-mint-turion /etc $ cd ltsp/ administrator@rauta-mint-turion /etc/ltsp $ ls dhcpd.conf ltsp-update-image.conf administrator@rauta-mint-turion /etc/ltsp $ cat dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } administrator@rauta-mint-turion /etc/ltsp $

  Read the article

• TPROXY Not working with HAProxy, Ubuntu 14.04

  - by Nyxynyx

  I'm trying to use HAProxy as a fully transparent proxy using TPROXY in Ubuntu 14.04. HAProxy will be setup on the first server with eth1 111.111.250.250 and eth0 10.111.128.134. The single balanced server has eth1 and eth0 as well. eth1 is the public facing network interface while eth0 is for the private network which both servers are in. Problem: I'm able to connect to the balanced server's port 1234 directly (via eth1) but am not able to reach the balanced server via Haproxy port 1234 (which redirects to 1234 via eth0). Am I missing out something in this configuration? On the HAProxy server The current kernel is: Linux extremehash-lb2 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux The kernel appears to have TPROXY support: # grep TPROXY /boot/config-3.13.0-24-generic CONFIG_NETFILTER_XT_TARGET_TPROXY=m HAProxy was compiled with TPROXY support: haproxy -vv HA-Proxy version 1.5.3 2014/07/25 Copyright 2000-2014 Willy Tarreau <[email protected]> Build options : TARGET = linux26 CPU = x86_64 CC = gcc CFLAGS = -g -fno-strict-aliasing OPTIONS = USE_LINUX_TPROXY=1 USE_LIBCRYPT=1 USE_STATIC_PCRE=1 Default settings : maxconn = 2000, bufsize = 16384, maxrewrite = 8192, maxpollevents = 200 Encrypted password support via crypt(3): yes Built without zlib support (USE_ZLIB not set) Compression algorithms supported : identity Built without OpenSSL support (USE_OPENSSL not set) Built with PCRE version : 8.31 2012-07-06 PCRE library supports JIT : no (USE_PCRE_JIT not set) Built with transparent proxy support using: IP_TRANSPARENT IPV6_TRANSPARENT IP_FREEBIND Available polling systems : epoll : pref=300, test result OK poll : pref=200, test result OK select : pref=150, test result OK Total: 3 (3 usable), will use epoll. In /etc/haproxy/haproxy.cfg, I've configured a port to have the following options: listen test1235 :1234 mode tcp option tcplog balance leastconn source 0.0.0.0 usesrc clientip server balanced1 10.111.163.76:1234 check inter 5s rise 2 fall 4 weight 4 On the balanced server In /etc/networking/interfaces I've set the gateway for eth0 to be the HAProxy box 10.111.128.134 and restarted networking. auto eth0 eth1 iface eth0 inet static address 111.111.250.250 netmask 255.255.224.0 gateway 111.131.224.1 dns-nameservers 8.8.4.4 8.8.8.8 209.244.0.3 iface eth1 inet static address 10.111.163.76 netmask 255.255.0.0 gateway 10.111.128.134 ip route gives: default via 111.111.224.1 dev eth0 10.111.0.0/16 dev eth1 proto kernel scope link src 10.111.163.76 111.111.224.0/19 dev eth0 proto kernel scope link src 111.111.250.250

  Read the article

• JNDI Datasource Problem on Tomcat 6, Hibernate

  - by Asuman AKYILDIZ

  I am using Tomcat 6 as application server, Struts-Hibernate and MyEclipse 6.0. My application uses JDBC driver but I should modify it to use JNDI Datasource. I followed steps as described in tomcat 6.0 howto tutorial. I defined my resource in tomcatconf: <Resource name="jdbc/ats" global="jdbc/ats" auth="Container" type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@//localhost:1521/MISDEV" username="TEST" password="TEST" maxActive="20" maxIdle="10" maxWait="-1" validationQuery="SELECT 1 from dual" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="false"/> I gave reference in my application web.xml: <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ats</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I defined datasource-dialect in my hibernate-cfg.xml <property name="connection.datasource">java:comp/env/jdbc/ats</property> <property name="dialect">org.hibernate.dialect.Oracle9Dialect</property> But when I create hibernate session, it can not open the connection: 09:18:11,322 ERROR JDBCExceptionReporter:72 - Connections could not be acquired from the underlying database! org.hibernate.exception.GenericJDBCException: Cannot open connection I also tried to set the properties at runtime: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); It does not open connection again. But, when I use JDBC driver it works: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.connection.url", "jdbc:oracle:thin:@//localhost:1521/MISDEV"); configuration.setProperty("hibernate.connection.username", "test"); configuration.setProperty("hibernate.connection.password", "test"); configuration.setProperty("hibernate.connection.driver_class", "oracle.jdbc.OracleDriver"); configuration.setProperty("hibernate.transaction.factory_class", "org.hibernate.transaction.JDBCTransactionFactory"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); I have been searching for 3 days and no success. What may be de problem?

  Read the article

• Kickstart based installation of RHEL 6.4 from USB

  - by Peter

  I want to setup some brand new servers with RHEL 6.4. Servers do not have DVD, so, I have to use USB for the installation. I already have a custom ISO with a kickstart file that I use on servers with DVD flawlessly. I used iso2usb to move the ISO t? my USB. When I boot from the USB, the ks file is found, anaconda starts, but then stops with the following error: "The installation source given by device ['sda1'] could not be found. Please check your parameters and try again" Notes: The USB IS the sda. My custom ISO file is renamed to linux.iso from iso2usb and it is present in the root directory of the USB. Kickstart file has the following entry: harddrive --partition=sda1 --dir=/ Please help me to automate the installation with kickstart. Edit 1: This the anaconda.log file: 09:01:57,029 INFO : no /etc/zfcp.conf; not configuring zfcp 09:01:57,259 INFO : created new libuser.conf at /tmp/libuser.4rAbps with instPath="/mnt/sysimage" 09:01:57,259 INFO : anaconda called with cmdline = ['/usr/bin/anaconda', '--stage2', 'hd:sda1:///images/install.img', '--dlabel', '--kickstart', '/tmp/ks.cfg', '--graphical', '--selinux', '--lang', 'en_US.UTF-8', '--keymap', 'us', '--repo', 'hd:sda1:/'] 09:01:57,260 INFO : Display mode = g 09:01:57,260 INFO : Default encoding = utf-8 09:01:59,444 DEBUG : X server has signalled a successful start. 09:01:59,446 INFO : Starting window manager, pid 1345. 09:01:59,537 INFO : Starting graphical installation. 09:01:59,741 INFO : Detected 7968M of memory 09:01:59,741 INFO : Swap attempt of 7968M 09:02:00,840 INFO : ISCSID is /usr/sbin/iscsid 09:02:00,840 INFO : no initiator set Edit 2: This is the part of anaconda log that indicates that it found the USB etc: 09:01:47,918 INFO : starting STEP_STAGE2 09:01:47,918 INFO : partition is sda1, dir is //images/install.img 09:01:47,918 INFO : mounting device sda1 for hard drive install 09:01:48,005 INFO : Path to stage2 image is /mnt/isodir///images/install.img 09:01:54,214 INFO : mounted loopback device /mnt/runtime on /dev/loop0 as /tmp/install.img 09:01:54,214 INFO : Looking for updates for HD in /mnt/isodir///images/updates.img 09:01:54,214 INFO : Looking for product for HD in /mnt/isodir///images/product.img 09:01:54,227 INFO : got stage2 at url hd:sda1:///images/install.img 09:01:54,254 INFO : Loading SELinux policy 09:01:54,700 INFO : getting ready to spawn shell now 09:01:54,975 INFO : Running anaconda script /usr/bin/anaconda 09:01:56,882 INFO : _Fedora is the highest priority installclass, using it 09:01:56,921 INFO : Running kickstart %%pre script(s) 09:01:56,922 WARNING : '/bin/sh' specified as full path 09:01:56,926 INFO : All kickstart %%pre script(s) have been run

  Read the article

• HAProxy + Percona XtraDB Cluster

  - by rottmanj

  I am attempting to setup HAproxy in conjunction with Percona XtraDB Cluster on a series of 3 EC2 instances. I have found a few tutorials online dealing with this specific issue, but I am a bit stuck. Both the Percona servers and the HAproxy servers are running ubuntu 12.04. The HAProxy version is 1.4.18, When I start HAProxy I get the following error: Server pxc-back/db01 is DOWN, reason: Socket error, check duration: 2ms. I am not really sure what the issue could be. I have verified the following: EC2 security groups ports are open Poured over my config files looking for issues. I currently do not see any. Ensured that xinetd was installed Ensured that I am using the correct ip address of the mysql server. Any help with this is greatly appreciated. Here are my current config Load Balancer /etc/haproxy/haproxy.cfg global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy debug #quiet daemon defaults log global mode http option tcplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend pxc-front bind 0.0.0.0:3307 mode tcp default_backend pxc-back frontend stats-front bind 0.0.0.0:22002 mode http default_backend stats-back backend pxc-back mode tcp balance leastconn option httpchk server db01 10.86.154.105:3306 check port 9200 inter 12000 rise 3 fall 3 backend stats-back mode http balance roundrobin stats uri /haproxy/stats MySql Server /etc/xinetd.d/mysqlchk # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID #only_from = 0.0.0.0/0 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } MySql Server /etc/services Added the line mysqlchk 9200/tcp # mysqlchk MySql Server /usr/bin/clustercheck # GNU nano 2.2.6 File: /usr/bin/clustercheck #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="testuser" MYSQL_PASSWORD="" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" fi

  Read the article

• Where is all the memory being consumed?

  - by Mark L

  Hello, I have a Dell R300 Ubuntu 9.10 box with 4GB of memory. All I'm running on there is haproxy, nagios and postfix yet there is ~2.7GB of memory being consumed. I've run ps and I can't get the sums to add up. Could anyone shed any light on where all the memory is being used? Cheers, Mark $ sudo free -m total used free shared buffers cached Mem: 3957 2746 1211 0 169 2320 -/+ buffers/cache: 256 3701 Swap: 6212 0 6212 Sorry for pasting all of ps' output but I'm keen to get to the bottom of this. $ sudo ps aux [sudo] password for mark: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 19320 1656 ? Ss May20 0:05 /sbin/init root 2 0.0 0.0 0 0 ? S< May20 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< May20 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S< May20 0:16 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/0] root 6 0.0 0.0 0 0 ? S< May20 0:03 [migration/1] root 7 0.0 0.0 0 0 ? S< May20 3:10 [ksoftirqd/1] root 8 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/1] root 9 0.0 0.0 0 0 ? S< May20 0:00 [migration/2] root 10 0.0 0.0 0 0 ? S< May20 0:19 [ksoftirqd/2] root 11 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/2] root 12 0.0 0.0 0 0 ? S< May20 0:01 [migration/3] root 13 0.0 0.0 0 0 ? S< May20 0:41 [ksoftirqd/3] root 14 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/3] root 15 0.0 0.0 0 0 ? S< May20 0:03 [events/0] root 16 0.0 0.0 0 0 ? S< May20 0:10 [events/1] root 17 0.0 0.0 0 0 ? S< May20 0:08 [events/2] root 18 0.0 0.0 0 0 ? S< May20 0:08 [events/3] root 19 0.0 0.0 0 0 ? S< May20 0:00 [cpuset] root 20 0.0 0.0 0 0 ? S< May20 0:00 [khelper] root 21 0.0 0.0 0 0 ? S< May20 0:00 [netns] root 22 0.0 0.0 0 0 ? S< May20 0:00 [async/mgr] root 23 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/0] root 24 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/1] root 25 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/2] root 26 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/3] root 27 0.0 0.0 0 0 ? S< May20 0:00 [kblockd/0] root 28 0.0 0.0 0 0 ? S< May20 0:01 [kblockd/1] root 29 0.0 0.0 0 0 ? S< May20 0:04 [kblockd/2] root 30 0.0 0.0 0 0 ? S< May20 0:02 [kblockd/3] root 31 0.0 0.0 0 0 ? S< May20 0:00 [kacpid] root 32 0.0 0.0 0 0 ? S< May20 0:00 [kacpi_notify] root 33 0.0 0.0 0 0 ? S< May20 0:00 [kacpi_hotplug] root 34 0.0 0.0 0 0 ? S< May20 0:00 [ata/0] root 35 0.0 0.0 0 0 ? S< May20 0:00 [ata/1] root 36 0.0 0.0 0 0 ? S< May20 0:00 [ata/2] root 37 0.0 0.0 0 0 ? S< May20 0:00 [ata/3] root 38 0.0 0.0 0 0 ? S< May20 0:00 [ata_aux] root 39 0.0 0.0 0 0 ? S< May20 0:00 [ksuspend_usbd] root 40 0.0 0.0 0 0 ? S< May20 0:00 [khubd] root 41 0.0 0.0 0 0 ? S< May20 0:00 [kseriod] root 42 0.0 0.0 0 0 ? S< May20 0:00 [kmmcd] root 43 0.0 0.0 0 0 ? S< May20 0:00 [bluetooth] root 44 0.0 0.0 0 0 ? S May20 0:00 [khungtaskd] root 45 0.0 0.0 0 0 ? S May20 0:00 [pdflush] root 46 0.0 0.0 0 0 ? S May20 0:09 [pdflush] root 47 0.0 0.0 0 0 ? S< May20 0:00 [kswapd0] root 48 0.0 0.0 0 0 ? S< May20 0:00 [aio/0] root 49 0.0 0.0 0 0 ? S< May20 0:00 [aio/1] root 50 0.0 0.0 0 0 ? S< May20 0:00 [aio/2] root 51 0.0 0.0 0 0 ? S< May20 0:00 [aio/3] root 52 0.0 0.0 0 0 ? S< May20 0:00 [ecryptfs-kthrea] root 53 0.0 0.0 0 0 ? S< May20 0:00 [crypto/0] root 54 0.0 0.0 0 0 ? S< May20 0:00 [crypto/1] root 55 0.0 0.0 0 0 ? S< May20 0:00 [crypto/2] root 56 0.0 0.0 0 0 ? S< May20 0:00 [crypto/3] root 70 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_0] root 71 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_1] root 74 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_2] root 75 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_3] root 82 0.0 0.0 0 0 ? S< May20 0:00 [kstriped] root 83 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/0] root 84 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/1] root 85 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/2] root 86 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/3] root 87 0.0 0.0 0 0 ? S< May20 0:00 [kmpath_handlerd] root 88 0.0 0.0 0 0 ? S< May20 0:00 [ksnapd] root 89 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/0] root 90 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/1] root 91 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/2] root 92 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/3] root 93 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/0] root 94 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/1] root 95 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/2] root 96 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/3] root 97 0.0 0.0 0 0 ? S< May20 0:00 [krfcommd] root 315 0.0 0.0 0 0 ? S< May20 0:09 [mpt_poll_0] root 317 0.0 0.0 0 0 ? S< May20 0:00 [mpt/0] root 547 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_4] root 587 0.0 0.0 0 0 ? S< May20 0:11 [kjournald2] root 636 0.0 0.0 12748 860 ? S May20 0:00 upstart-udev-bridge --daemon root 657 0.0 0.0 17064 924 ? S<s May20 0:00 udevd --daemon root 666 0.0 0.0 8192 612 ? Ss May20 0:00 dd bs=1 if=/proc/kmsg of=/var/run/rsyslog/kmsg root 774 0.0 0.0 17060 888 ? S< May20 0:00 udevd --daemon root 775 0.0 0.0 17060 888 ? S< May20 0:00 udevd --daemon syslog 825 0.0 0.0 191696 1988 ? Sl May20 0:31 rsyslogd -c4 root 839 0.0 0.0 0 0 ? S< May20 0:00 [edac-poller] root 870 0.0 0.0 0 0 ? S< May20 0:00 [kpsmoused] root 1006 0.0 0.0 5988 604 tty4 Ss+ May20 0:00 /sbin/getty -8 38400 tty4 root 1008 0.0 0.0 5988 604 tty5 Ss+ May20 0:00 /sbin/getty -8 38400 tty5 root 1015 0.0 0.0 5988 604 tty2 Ss+ May20 0:00 /sbin/getty -8 38400 tty2 root 1016 0.0 0.0 5988 608 tty3 Ss+ May20 0:00 /sbin/getty -8 38400 tty3 root 1018 0.0 0.0 5988 604 tty6 Ss+ May20 0:00 /sbin/getty -8 38400 tty6 daemon 1025 0.0 0.0 16512 472 ? Ss May20 0:00 atd root 1026 0.0 0.0 18708 1000 ? Ss May20 0:03 cron root 1052 0.0 0.0 49072 1252 ? Ss May20 0:25 /usr/sbin/sshd root 1084 0.0 0.0 5988 604 tty1 Ss+ May20 0:00 /sbin/getty -8 38400 tty1 root 6320 0.0 0.0 19440 956 ? Ss May21 0:00 /usr/sbin/xinetd -pidfile /var/run/xinetd.pid -stayalive -inetd_compat -inetd_ipv6 nagios 8197 0.0 0.0 27452 1696 ? SNs May21 2:57 /usr/sbin/nagios3 -d /etc/nagios3/nagios.cfg root 10882 0.1 0.0 70280 3104 ? Ss 10:30 0:00 sshd: mark [priv] mark 10934 0.0 0.0 70432 1776 ? S 10:30 0:00 sshd: mark@pts/0 mark 10935 1.4 0.1 21572 4336 pts/0 Ss 10:30 0:00 -bash root 10953 1.0 0.0 15164 1136 pts/0 R+ 10:30 0:00 ps aux haproxy 12738 0.0 0.0 17208 992 ? Ss Jun08 0:49 /usr/sbin/haproxy -f /etc/haproxy/haproxy.cfg root 23953 0.0 0.0 37012 2192 ? Ss Jun04 0:03 /usr/lib/postfix/master postfix 23955 0.0 0.0 39232 2356 ? S Jun04 0:00 qmgr -l -t fifo -u postfix 32603 0.0 0.0 39072 2132 ? S 09:05 0:00 pickup -l -t fifo -u -c Here's meminfo: $ cat /proc/meminfo MemTotal: 4052852 kB MemFree: 1240488 kB Buffers: 173172 kB Cached: 2376420 kB SwapCached: 0 kB Active: 1479288 kB Inactive: 1081876 kB Active(anon): 11792 kB Inactive(anon): 0 kB Active(file): 1467496 kB Inactive(file): 1081876 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 6361700 kB SwapFree: 6361700 kB Dirty: 44 kB Writeback: 0 kB AnonPages: 11568 kB Mapped: 5844 kB Slab: 155032 kB SReclaimable: 145804 kB SUnreclaim: 9228 kB PageTables: 1592 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 8388124 kB Committed_AS: 51732 kB VmallocTotal: 34359738367 kB VmallocUsed: 282604 kB VmallocChunk: 34359453499 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 6784 kB DirectMap2M: 4182016 kB Here's slabinfo: $ cat /proc/slabinfo slabinfo - version: 2.1 # name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> : tunables <limit> <batchcount> <sharedfactor> : slabdata <active_slabs> <num_slabs> <sharedavail> ip6_dst_cache 50 50 320 25 2 : tunables 0 0 0 : slabdata 2 2 0 UDPLITEv6 0 0 960 17 4 : tunables 0 0 0 : slabdata 0 0 0 UDPv6 68 68 960 17 4 : tunables 0 0 0 : slabdata 4 4 0 tw_sock_TCPv6 0 0 320 25 2 : tunables 0 0 0 : slabdata 0 0 0 TCPv6 72 72 1792 18 8 : tunables 0 0 0 : slabdata 4 4 0 dm_raid1_read_record 0 0 1064 30 8 : tunables 0 0 0 : slabdata 0 0 0 kcopyd_job 0 0 368 22 2 : tunables 0 0 0 : slabdata 0 0 0 dm_uevent 0 0 2608 12 8 : tunables 0 0 0 : slabdata 0 0 0 dm_rq_target_io 0 0 376 21 2 : tunables 0 0 0 : slabdata 0 0 0 uhci_urb_priv 0 0 56 73 1 : tunables 0 0 0 : slabdata 0 0 0 cfq_queue 0 0 168 24 1 : tunables 0 0 0 : slabdata 0 0 0 mqueue_inode_cache 18 18 896 18 4 : tunables 0 0 0 : slabdata 1 1 0 fuse_request 0 0 632 25 4 : tunables 0 0 0 : slabdata 0 0 0 fuse_inode 0 0 768 21 4 : tunables 0 0 0 : slabdata 0 0 0 ecryptfs_inode_cache 0 0 1024 16 4 : tunables 0 0 0 : slabdata 0 0 0 hugetlbfs_inode_cache 26 26 608 26 4 : tunables 0 0 0 : slabdata 1 1 0 journal_handle 680 680 24 170 1 : tunables 0 0 0 : slabdata 4 4 0 journal_head 144 144 112 36 1 : tunables 0 0 0 : slabdata 4 4 0 revoke_table 256 256 16 256 1 : tunables 0 0 0 : slabdata 1 1 0 revoke_record 512 512 32 128 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_inode_cache 53306 53424 888 18 4 : tunables 0 0 0 : slabdata 2968 2968 0 ext4_free_block_extents 292 292 56 73 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_alloc_context 112 112 144 28 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_prealloc_space 156 156 104 39 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_system_zone 0 0 40 102 1 : tunables 0 0 0 : slabdata 0 0 0 ext2_inode_cache 0 0 776 21 4 : tunables 0 0 0 : slabdata 0 0 0 ext3_inode_cache 0 0 784 20 4 : tunables 0 0 0 : slabdata 0 0 0 ext3_xattr 0 0 88 46 1 : tunables 0 0 0 : slabdata 0 0 0 dquot 0 0 256 16 1 : tunables 0 0 0 : slabdata 0 0 0 shmem_inode_cache 606 620 800 20 4 : tunables 0 0 0 : slabdata 31 31 0 pid_namespace 0 0 2112 15 8 : tunables 0 0 0 : slabdata 0 0 0 UDP-Lite 0 0 832 19 4 : tunables 0 0 0 : slabdata 0 0 0 RAW 183 210 768 21 4 : tunables 0 0 0 : slabdata 10 10 0 UDP 76 76 832 19 4 : tunables 0 0 0 : slabdata 4 4 0 tw_sock_TCP 80 80 256 16 1 : tunables 0 0 0 : slabdata 5 5 0 TCP 81 114 1664 19 8 : tunables 0 0 0 : slabdata 6 6 0 blkdev_integrity 144 144 112 36 1 : tunables 0 0 0 : slabdata 4 4 0 blkdev_queue 64 64 2024 16 8 : tunables 0 0 0 : slabdata 4 4 0 blkdev_requests 120 120 336 24 2 : tunables 0 0 0 : slabdata 5 5 0 fsnotify_event 156 156 104 39 1 : tunables 0 0 0 : slabdata 4 4 0 bip-256 7 7 4224 7 8 : tunables 0 0 0 : slabdata 1 1 0 bip-128 0 0 2176 15 8 : tunables 0 0 0 : slabdata 0 0 0 bip-64 0 0 1152 28 8 : tunables 0 0 0 : slabdata 0 0 0 bip-16 84 84 384 21 2 : tunables 0 0 0 : slabdata 4 4 0 sock_inode_cache 224 276 704 23 4 : tunables 0 0 0 : slabdata 12 12 0 file_lock_cache 88 88 184 22 1 : tunables 0 0 0 : slabdata 4 4 0 net_namespace 0 0 1920 17 8 : tunables 0 0 0 : slabdata 0 0 0 Acpi-ParseExt 640 672 72 56 1 : tunables 0 0 0 : slabdata 12 12 0 taskstats 48 48 328 24 2 : tunables 0 0 0 : slabdata 2 2 0 proc_inode_cache 1613 1750 640 25 4 : tunables 0 0 0 : slabdata 70 70 0 sigqueue 100 100 160 25 1 : tunables 0 0 0 : slabdata 4 4 0 radix_tree_node 22443 22475 560 29 4 : tunables 0 0 0 : slabdata 775 775 0 bdev_cache 72 72 896 18 4 : tunables 0 0 0 : slabdata 4 4 0 sysfs_dir_cache 9866 9894 80 51 1 : tunables 0 0 0 : slabdata 194 194 0 inode_cache 2268 2268 592 27 4 : tunables 0 0 0 : slabdata 84 84 0 dentry 285907 286062 192 21 1 : tunables 0 0 0 : slabdata 13622 13622 0 buffer_head 256447 257472 112 36 1 : tunables 0 0 0 : slabdata 7152 7152 0 vm_area_struct 1469 1541 176 23 1 : tunables 0 0 0 : slabdata 67 67 0 mm_struct 82 95 832 19 4 : tunables 0 0 0 : slabdata 5 5 0 files_cache 104 161 704 23 4 : tunables 0 0 0 : slabdata 7 7 0 signal_cache 163 187 960 17 4 : tunables 0 0 0 : slabdata 11 11 0 sighand_cache 145 165 2112 15 8 : tunables 0 0 0 : slabdata 11 11 0 task_xstate 118 140 576 28 4 : tunables 0 0 0 : slabdata 5 5 0 task_struct 128 165 5808 5 8 : tunables 0 0 0 : slabdata 33 33 0 anon_vma 731 896 32 128 1 : tunables 0 0 0 : slabdata 7 7 0 shared_policy_node 85 85 48 85 1 : tunables 0 0 0 : slabdata 1 1 0 numa_policy 170 170 24 170 1 : tunables 0 0 0 : slabdata 1 1 0 idr_layer_cache 240 240 544 30 4 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-8192 27 32 8192 4 8 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-4096 291 344 4096 8 8 : tunables 0 0 0 : slabdata 43 43 0 kmalloc-2048 225 240 2048 16 8 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-1024 366 432 1024 16 4 : tunables 0 0 0 : slabdata 27 27 0 kmalloc-512 536 544 512 16 2 : tunables 0 0 0 : slabdata 34 34 0 kmalloc-256 406 528 256 16 1 : tunables 0 0 0 : slabdata 33 33 0 kmalloc-128 503 576 128 32 1 : tunables 0 0 0 : slabdata 18 18 0 kmalloc-64 3467 3712 64 64 1 : tunables 0 0 0 : slabdata 58 58 0 kmalloc-32 1520 1920 32 128 1 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-16 3547 3840 16 256 1 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-8 4607 4608 8 512 1 : tunables 0 0 0 : slabdata 9 9 0 kmalloc-192 4620 5313 192 21 1 : tunables 0 0 0 : slabdata 253 253 0 kmalloc-96 1780 1848 96 42 1 : tunables 0 0 0 : slabdata 44 44 0 kmem_cache_node 0 0 64 64 1 : tunables 0 0 0 : slabdata 0 0 0

  Read the article

• JNDI Datasource Problem on Tomcat 6, Hibernate

  - by Asuman AKYILDIZ

  Hello; I am using Tomcat 6 as application server, Struts-Hibernate and MyEclipse 6.0. My application uses JDBC driver but I should modify it to use JNDI Datasource. I followed steps as described in tomcat 6.0 howto tutorial. I defined my resource in tomcatconf: <Resource name="jdbc/ats" global="jdbc/ats" auth="Container" type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@//localhost:1521/MISDEV" username="TEST" password="TEST" maxActive="20" maxIdle="10" maxWait="-1" validationQuery="SELECT 1 from dual" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="false"/> I gave reference in my application web.xml: <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ats</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I defined datasource-dialect in my hibernate-cfg.xml <property name="connection.datasource">java:comp/env/jdbc/ats</property> <property name="dialect">org.hibernate.dialect.Oracle9Dialect</property> But when I create hibernate session, it can not open the connection: 09:18:11,322 ERROR JDBCExceptionReporter:72 - Connections could not be acquired from the underlying database! org.hibernate.exception.GenericJDBCException: Cannot open connection I also tried to set the properties at runtime: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); It does not open connection again. But, when I use JDBC driver it works: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.connection.url", "jdbc:oracle:thin:@//localhost:1521/MISDEV"); configuration.setProperty("hibernate.connection.username", "test"); configuration.setProperty("hibernate.connection.password", "test"); configuration.setProperty("hibernate.connection.driver_class", "oracle.jdbc.OracleDriver"); configuration.setProperty("hibernate.transaction.factory_class", "org.hibernate.transaction.JDBCTransactionFactory"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); I have been searching for 3 days and no success. What may be de problem?

  Read the article

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• How to force Debian to boot new Kernel?

  - by ThE_-_BliZZarD

  I'm running Debian 6, Debian GNU/Linux, with Linux 2.6.32-5-amd64 under Grub2 ( 1.98+20100804-14+squeeze1) on a remote system (no possibility to view the pre-boot messages). I compiled and installed a new kernel, but I can not get it to boot. What I have done: Installed the packages via: dpkg -i linux-headers-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb linux-image-3.5.3.20120914-amd64_3.5.3.20120914-amd64-10.00.Custom_amd64.deb This updated the Grub configuration. My /boot/grub/grub.cfg now contains: menuentry 'Debian GNU/Linux, with Linux 3.5.3.20120914-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 3.5.3.20120914-amd64 ...' linux /vmlinuz-3.5.3.20120914-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-3.5.3.20120914-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod raid insmod mdraid insmod part_msdos insmod part_msdos insmod ext2 set root='(md0)' search --no-floppy --fs-uuid --set 5a3882a9-c7df-4f6a-9feb-f03e3e37be01 echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=003242b5-121b-49f3-b32f-1b40aea56eed ro acpi=ht quiet panic=10 echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } I used grub-set-default "Debian GNU/Linux, with Linux 2.6.32-5-amd64" to set the old kernel as default and then grub-reboot "Debian GNU/Linux, with Linux 3.5.3.20120914-amd64" to boot into the new kernel once. After update-grub I rebooted the system, but everytime it comes back up with the old kernel (2.6). I tried setting the new one as default (grub-set-default 0, update-grub, reboot) but, still the old one. The Syslogs contain NO hint whatsoever about trying to boot the new kernel - only the old one. Would there be any hints regarding problems with a kernel? Is there a way to enable debug-logging in grub? What am I doing wrong? How can I force the system to boot the new kernel? Edit: Hardware of remote machine. CPU cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 5 model name : AMD Athlon(tm) II X4 605e Processor stepping : 3 cpu MHz : 2294.898 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt bogomips : 4589.77 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate (copied only the first, 3 more follow) The server is a Fujitsu PRIMERGY MX130 S1.

  Read the article

• Pxe net install Centos with Static IP

  - by Stu2000

  I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by Mindful

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails. UPDATE: here's my Grub.Conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd1,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.30.10-105.2.23.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.10-105.2.23.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.10-105.2.23.fc11.i686.PAE.img title Fedora (2.6.30.9-102.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.9-102.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.9-102.fc11.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img title Fedora (2.6.27.21-170.2.56.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.21-170.2.56.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.21-170.2.56.fc10.i686.img title Fedora (2.6.27.19-170.2.35.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.19-170.2.35.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img title Upgrade to Fedora 10 (Cambridge) kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=http://chi-10g-1-mirror.fastsoft.net/pub/linux/fedora/linux/releases/10/Fedora/i386/os/images/install.img ks=hd:UUID=f11769ba-29bc-46de-8c40-a949720a438e:/upgrade/ks.cfg initrd /upgrade/initrd.img title Win rootnoverify (hd0,0) chainloader +1

  Read the article

• "log on as a batch job" user rights removed by what GPO?

  - by LarsH

  I am not much of a server administrator, but get my feet wet when I have to. Right now I'm running some COTS software on a Windows 2008 Server machine. The software installer creates a few user accounts for running its processes, and then gives those users the right to "log on as a batch job". Every so often (e.g. yesterday at 2:52pm and this morning at 7:50am), those rights disappear. The software then stops working. I can verify that the user rights are gone by using secedit /export /cfg e:\temp\uraExp.inf /areas USER_RIGHTS and I have a script that does this every 30 seconds and logs the results with a timestamp, so I know when the rights disappear. What I see from the export is that in the "good" state, i.e. after I install the software and it's working correctly, the line for SeBatchLogonRight from the secedit export includes the user accounts created by the software. But every few hours (sometimes more), those user accounts are removed from that line. The same thing can be seen by using the GUI tool Local Security Policy > Security Settings > Local Policies > User Rights Assignment > Log on as a batch job: in the "good" state, that policy includes the needed user accounts, and in the bad state, the policy does not. Based on the above-mentioned logging script and the timestamps at which the user rights are being removed, I can see clearly that some GPOs are causing the change. The GPO Operational log shows GPOs being processed at exactly the right times. E.g.: Starting Registry Extension Processing. List of applicable GPOs: (Changes were detected.) Local Group Policy I have run GPOs on demand using gpupdate /force, and was able to verify that this caused the User Rights to be removed. We have looked over local group policies till our eyes are crossed, trying to figure out which one might be stripping these User Rights to "log on as a batch job." We have not configured any local group policies on this machine, that we know of; so is there a default local group policy that might typically do such a thing? Are there typical domain policies that would do this? I have been working with our IT staff colleagues to troubleshoot the problem, but none of them are really GPO experts... They wear many hats, and they do what they need to do in order to keep most things running. Any suggestions would be greatly appreciated!

  Read the article

• Ubuntu getting wrong hostname from DHCP

  - by sam

  When provisioning new Ubuntu Precise (12.04) servers, the hostname they're getting seems to be generated from the DNS search path, not a reverse lookup on the hostname. Take the following configuration BIND is configured with the hostname, and reverse name Normal zone $TTL 600 $ORIGIN srv.local.net. @ IN SOA ns0.local.net. hostmaster.local.net. ( 2014082101 10800 3600 604800 600 ) @ IN NS ns0.local.net. @ IN MX 5 mail.local.net. my-new-server IN A 10.32.2.30 And reverse @ IN SOA ns0.local.net. hostmaster.local.net. ( 2014082101 10800 3600 604800 600 ) @ IN NS ns0.local.net. $ORIGIN 32.10.in-addr.arpa. 30.2 IN PTR my-new-server.srv.local.net. Then DHCPD is configured to hand out static leases based on mac addresses like so subnet 10.32.2.0 netmask 255.255.254.0 { option subnet-mask 255.255.254.0; option routers 10.32.2.1; option domain-name-servers 10.32.2.1; option domain-name "util.of1.local.net of1.local.net srv.local.net"; site-option-space "pxelinux"; option pxelinux.magic f1:00:74:7e; if exists dhcp-parameter-request-list { option dhcp-parameter-request-list = concat(option dhcp-parameter-request-list,d0,d1,d2,d3); } group { option pxelinux.configfile "pxelinux.cfg/pxeboot"; host my-new-server { fixed-address my-new-server.srv.local.net; hardware ethernet aa:aa:aa:bb:bb:bb; } } } So the hostname should be my-new-server.srv.local.net, however when building a Ubuntu 12.04 node, the hostname ends up as my-new-server.util.of1.local.net When building Lucid (10.04) hosts, the hostname will be correct, it's only on Precise/12.04 nodes we have the problem. Doing a normal and reverse lookup on the host and IP returns the correct result Sams-MacBook-Pro:~ sam$ host my-new-server my-new-server.srv.local.net has address 10.32.2.30 Sams-MacBook-Pro:~ sam$ host my-new-server.srv.local.net my-new-server.srv.local.net has address 10.32.2.30 Sams-MacBook-Pro:~ sam$ host 10.32.2.30 30.2.32.10.in-addr.arpa domain name pointer my-new-server.srv.local.net. The contents of the hosts file is incorrect too 127.0.0.1 localhost 127.0.1.1 my-new-server.util.of1.local.net of1.local.net srv.local.net my-new-server So it looks like when it creates the hosts file, it puts the entire contents of the DNS search path into the local address so the FQDN according to the server is the short hostname as defined, then the first domain in the search path. Is there a way to get around this behaviour, or fix this so it gets the hostname correctly? It's picking up the first part of the hostname, then the rest is wrong.

  Read the article

• Why is domU faster than dom0 on IO?

  - by Paco

  I have installed debian 7 on a physical machine. This is the configuration of the machine: 3 hard drives using RAID 5 Strip element size: 1M Read policy: Adaptive read ahead Write policy: Write Through /boot 200 MB ext2 / 15 GB ext3 SWAP 10GB LVM rest (~500GB) emphasized text I installed postgresql, created a big database (over 1GB). I have an SQL request that takes a lot of time to run (a SELECT statement, so it only reads data from the database). This request takes approximately 5.5 seconds to run. Then, I installed XEN, created a domU, with another debian distro. On this OS, I also installed postgresql, with the same database. The same SQL request takes only 2.5 seconds to run. I checked the kernel on both dom0 and domU. uname-a returns "Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2+deb7u2 x86_64 GNU/Linux" on both systems. I checked the kernel parameters, which are approximately the same. For those that are relevant, I changed their values to make them match on both systems using sysctl. I saw no changes (the requests still take the same amount of time). After this, I checked the file systems. I used ext3 on domU. Still no changes. I installed hdparm, and ran hdparm -Tt on both systems, on all my partitions on both systems, and I get similar results. Now, I am stuck, I don't know what is different, and what could be the cause of such a big difference. Additional Info: Debian runs on a Dell server PowerEdge 2950 postgresql: 9.1.9 (both dom0 and domU) xen-linux-system: 3.2.0 xen-hypervisor: 4.1 Thanks EDIT: As Krzysztof Ksiezyk suggested, it might be due to some file caching system. I ran the dd command to test both the read and write speed. Here is domU: root@test1:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 18.8289 s, 107 MB/s root@test1:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 2020+0 records in 2020+0 records out 2020000000 bytes (2.0 GB) copied, 15.0549 s, 134 MB/s And here is dom0: root@debian:~# dd if=/dev/zero of=/root/dd count=5MB bs=1MB ^C1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 8.87281 s, 191 MB/s root@debian:~# dd if=/root/dd of=/dev/null count=5MB bs=1MB 1693+0 records in 1693+0 records out 1693000000 bytes (1.7 GB) copied, 0.501509 s, 3.4 GB/s What can be the cause of this caching system? And how can we "fix" it? Can we apply it to dom0? EDIT 2: I switched my virtual disk type. To do so I followed this article. I did a dd if=/dev/vg0/test1-disk of=/mnt/test1-disk.img bs=16M Then in /etc/xen/test1.cfg, I changed the disk parameter to use file: instead of phy: it should have removed the file caching, but I still get the same numbers (domU being much faster for Postgres)

  Read the article

• while running mvn jetty:run showing the following error ..

  - by munna

  C:\source\myprojectmvn jetty:run [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------ [INFO] Building AppFuse Spring MVC Application [INFO] task-segment: [jetty:run] [INFO] ------------------------------------------------------------------------ [INFO] Preparing jetty:run [WARNING] POM for 'xfire:xfire-jsr181-api:pom:1.0-M1:compile' is invalid. Its dependencies (if any) will NOT be available to the current build. [INFO] [warpath:add-classes {execution: default}] [INFO] [aspectj:compile {execution: default}] [INFO] [native2ascii:native2ascii {execution: native2ascii-utf8}] [INFO] [native2ascii:native2ascii {execution: native2ascii-8859_1}] [INFO] [resources:resources {execution: default-resources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. b uild is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 12 resources [INFO] Copying 1 resource [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] [compiler:compile {execution: default-compile}] [INFO] Nothing to compile - all classes are up to date [INFO] [resources:testResources {execution: default-testResources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. b uild is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 4 resources [INFO] Copying 9 resources [INFO] Preparing hibernate3:hbm2ddl [WARNING] Removing: hbm2ddl from forked lifecycle, to prevent recursive invocati on. [INFO] [warpath:add-classes {execution: default}] [INFO] [aspectj:compile {execution: default}] [INFO] [native2ascii:native2ascii {execution: native2ascii-utf8}] [INFO] [native2ascii:native2ascii {execution: native2ascii-8859_1}] [INFO] [resources:resources {execution: default-resources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. b uild is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 12 resources [INFO] Copying 1 resource [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] Copying 26 resources [INFO] [hibernate3:hbm2ddl {execution: default}] [INFO] Configuration XML file loaded: file:/C:/source/myproject/src/main/resourc es/hibernate.cfg.xml [INFO] Configuration XML file loaded: file:/C:/source/myproject/src/main/resourc es/hibernate.cfg.xml [INFO] Configuration Properties file loaded: C:\source\myproject\target\classes\ jdbc.properties alter table user_role drop foreign key FK143BF46A4FD90D75; alter table user_role drop foreign key FK143BF46AF503D155; drop table if exists app_user; drop table if exists role; drop table if exists user_role; create table app_user (id bigint not null auto_increment, account_expired bit no t null, account_locked bit not null, address varchar(150), city varchar(50) not null, country varchar(100), postal_code varchar(15) not null, province varchar(1 00), credentials_expired bit not null, email varchar(255) not null unique, accou nt_enabled bit, first_name varchar(50) not null, last_name varchar(50) not null, password varchar(255) not null, password_hint varchar(255), phone_number varcha r(255), username varchar(50) not null unique, version integer, website varchar(2 55), primary key (id)) ENGINE=InnoDB; create table role (id bigint not null auto_increment, description varchar(64), n ame varchar(20), primary key (id)) ENGINE=InnoDB; create table user_role (user_id bigint not null, role_id bigint not null, primar y key (user_id, role_id)) ENGINE=InnoDB; alter table user_role add index FK143BF46A4FD90D75 (role_id), add constraint FK1 43BF46A4FD90D75 foreign key (role_id) references role (id); alter table user_role add index FK143BF46AF503D155 (user_id), add constraint FK1 43BF46AF503D155 foreign key (user_id) references app_user (id); [INFO] [compiler:testCompile {execution: default-testCompile}] [INFO] Nothing to compile - all classes are up to date [INFO] [dbunit:operation {execution: test-compile}] [INFO] [jetty:run {execution: default-cli}] [INFO] Configuring Jetty for project: AppFuse Spring MVC Application [INFO] Webapp source directory = C:\source\myproject\src\main\webapp [INFO] web.xml file = C:\source\myproject\src\main\webapp\WEB-INF\web.xml [INFO] Classes = C:\source\myproject\target\classes [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\applicationContext-validation.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\applicationContext.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\dispatcher-servlet.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\menu-config.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\urlrewrite.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\validation.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\validator-rules-custom.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\validator-rules.xml [INFO] Adding extra scan target from pattern: C:\source\myproject\src\main\webap p\WEB-INF\web.xml 2010-06-02 15:13:28.921::INFO: Logging to STDERR via org.mortbay.log.StdErrLog [INFO] Context path = / [INFO] Tmp directory = determined at runtime [INFO] Web defaults = org/mortbay/jetty/webapp/webdefault.xml [INFO] Web overrides = none [INFO] Webapp directory = C:\source\myproject\src\main\webapp [INFO] Starting jetty 6.1.9 ... 2010-06-02 15:13:28.983::INFO: jetty-6.1.9 2010-06-02 15:13:28.248::INFO: No Transaction manager found - if your webapp re quires one, please configure one. 2010-06-02 15:13:28.482:/:INFO: Initializing Spring root WebApplicationContext [myproject] ERROR [main] ContextLoader.initWebApplicationContext(215) | Context initialization failed org.springframework.beans.factory.BeanDefinitionStoreException: IOException pars ing XML document from ServletContext resource [/WEB-INF/xfire-servlet.xml]; nest ed exception is java.io.FileNotFoundException: Could not open ServletContext res ource [/WEB-INF/xfire-servlet.xml] at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:349) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:310) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:423) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:353) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler. java:540) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.jav a:1220) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 510) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448 ) at org.mortbay.jetty.plugin.Jetty6PluginWebAppContext.doStart(Jetty6Plug inWebAppContext.java:110) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHan dlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.plugin.Jetty6PluginServer.start(Jetty6PluginServer. java:132) at org.mortbay.jetty.plugin.AbstractJettyMojo.startJetty(AbstractJettyMo jo.java:357) at org.mortbay.jetty.plugin.AbstractJettyMojo.execute(AbstractJettyMojo. java:293) at org.mortbay.jetty.plugin.AbstractJettyRunMojo.execute(AbstractJettyRu nMojo.java:203) at org.mortbay.jetty.plugin.Jetty6RunMojo.execute(Jetty6RunMojo.java:184 ) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:348) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: java.io.FileNotFoundException: Could not open ServletContext resource [/WEB-INF/xfire-servlet.xml] at org.springframework.web.context.support.ServletContextResource.getInp utStream(ServletContextResource.java:116) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:336) ... 51 more 2010-06-02 15:13:29.919::WARN: Failed startup of context org.mortbay.jetty.plug in.Jetty6PluginWebAppContext@1ba4806{/,C:\source\myproject\src\main\webapp} org.springframework.beans.factory.BeanDefinitionStoreException: IOException pars ing XML document from ServletContext resource [/WEB-INF/xfire-servlet.xml]; nest ed exception is java.io.FileNotFoundException: Could not open ServletContext res ource [/WEB-INF/xfire-servlet.xml] at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:349) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:310) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:423) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:353) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler. java:540) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.jav a:1220) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 510) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448 ) at org.mortbay.jetty.plugin.Jetty6PluginWebAppContext.doStart(Jetty6Plug inWebAppContext.java:110) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHan dlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.plugin.Jetty6PluginServer.start(Jetty6PluginServer. java:132) at org.mortbay.jetty.plugin.AbstractJettyMojo.startJetty(AbstractJettyMo jo.java:357) at org.mortbay.jetty.plugin.AbstractJettyMojo.execute(AbstractJettyMojo. java:293) at org.mortbay.jetty.plugin.AbstractJettyRunMojo.execute(AbstractJettyRu nMojo.java:203) at org.mortbay.jetty.plugin.Jetty6RunMojo.execute(Jetty6RunMojo.java:184 ) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:348) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: java.io.FileNotFoundException: Could not open ServletContext resource [/WEB-INF/xfire-servlet.xml] at org.springframework.web.context.support.ServletContextResource.getInp utStream(ServletContextResource.java:116) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:336) ... 51 more 2010-06-02 15:13:29.152::WARN: Nested in org.springframework.beans.factory.Bean DefinitionStoreException: IOException parsing XML document from ServletContext r esource [/WEB-INF/xfire-servlet.xml]; nested exception is java.io.FileNotFoundEx ception: Could not open ServletContext resource [/WEB-INF/xfire-servlet.xml]: java.io.FileNotFoundException: Could not open ServletContext resource [/WEB-INF/ xfire-servlet.xml] at org.springframework.web.context.support.ServletContextResource.getInp utStream(ServletContextResource.java:116) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:336) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:310) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:124) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:92) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:423) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:353) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler. java:540) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.jav a:1220) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 510) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:448 ) at org.mortbay.jetty.plugin.Jetty6PluginWebAppContext.doStart(Jetty6Plug inWebAppContext.java:110) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHan dlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection .java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 130) at org.mortbay.jetty.Server.doStart(Server.java:222) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 39) at org.mortbay.jetty.plugin.Jetty6PluginServer.start(Jetty6PluginServer. java:132) at org.mortbay.jetty.plugin.AbstractJettyMojo.startJetty(AbstractJettyMo jo.java:357) at org.mortbay.jetty.plugin.AbstractJettyMojo.execute(AbstractJettyMojo. java:293) at org.mortbay.jetty.plugin.AbstractJettyRunMojo.execute(AbstractJettyRu nMojo.java:203) at org.mortbay.jetty.plugin.Jetty6RunMojo.execute(Jetty6RunMojo.java:184 ) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:348) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) 2010-06-02 15:13:29.417::INFO: Started [email protected]:8080 [INFO] Started Jetty Server [INFO] Starting scanner at interval of 3 seconds.

  Read the article

• How to Get All the Windows 8 Editions on One Install Disk

  - by Taylor Gibb

  There are a lot of different versions of Windows, but you probably didn’t know that short of the Enterprise edition, the disc or image that you own contains all versions for that architecture. Read on to see how we can use them to make a universal Windows 8 install disc. Things You Will Need A x86 Version of Windows 8 A x64 Version of Windows 8 A x86 Version of Windows 8 Enterprise A x64 Version of Windows 8 Enterprise A Windows 8 PC Note: While we will use all the images above you don’t really need the Enterprise Edition. You could always leave out parts of the tutorial if you know what you are doing, if you are not comfortable with that and still want to follow through you could always grab the Enterprise evaluation images that are available for free to the public, on MSDN. Getting Started To get started you will need to Download the Windows 8 ADK from Microsoft. Once downloaded go ahead and install it, you will only need the Deployment tools so be sure to uncheck the rest of the options. Lastly you will also need to create the following folder structure on the root of your C:\ drive to make things a bit easier. C:\Windows8Root C:\Windows8Root\x86 C:\Windows8Root\x64 C:\Windows8Root\Enterprisex86 C:\Windows8Root\Enterprisex64 C:\Windows8Root\Temp C:\Windows8Root\Final OK lets get started. Making The Image The first thing we need to do is create a base image, so mount the x86 version of Windows 8 and copy its files to: C:\Windows8Root\Final Now move the install.wim file from: C:\Windows8Root\Final\sources To: C:\Windows8Root\x86 Next go ahead and copy the install.wim file from the other 3 images, Windows 8 x64, Windows 8 Enterprise x86 and Windows 8 Enterprise x64 to the respective folders in Windows8Root, the install.wim file can be located at: D:\sources\install.wim Note: The above assumes that the images are always mounted at drive D. Remember that each install.wim is different so don’t copy them to the wrong directories or the rest of the tutorial wont work. Next switch to the Metro Start Screen and open the Deployment and Imaging Tools Environment. Note: If you are not a local administrator on your PC, you will need to right-click on it and choose to run it as an administrator. Now run the following commands: Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Next navigate to: C:\Windows8Root\sources\ And create a new text file. You will need to call it: EI.cfg Then edit it to look like the following: The last thing we need to do is work some magic to get Windows Media Center added to the WMC editions of Windows 8. For that I have written a little script to make it easier for everybody, you can grab it here. Once you have downloaded it extract it. In order to use it right-click in the bottom left hand corner of the screen, and open an elevated command prompt. Then go ahead and paste the following into the command prompt window. powershell.exe -ExecutionPolicy Unrestricted -File C:\Users\Taylor\Documents\HTGWindows8Converter.ps1 Note: You will need to replace the path to the script, another thing to note is that if the path you replace it with has spaces you will need to enclose the path in quotes. The script should kick off straight away and has some progress bars you can watch while it does its thing. Half way through another Window will pop open, which will start creating your final ISO image. When its complete, close the command prompt and you should have an ISO image on the root of your C drive called: HTGWindows8.iso That’s all there is to it. 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29  | Next Page >