Search Results

Search found 2396 results on 96 pages for 'inner'.

Page 26/96 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Is there an excuse for excessively short variable names?

    - by KChaloux
    This has become a large frustration with the codebase I'm currently working in; many of our variable names are short and undescriptive. I'm the only developer left on the project, and there isn't documentation as to what most of them do, so I have to spend extra time tracking down what they represent. For example, I was reading over some code that updates the definition of an optical surface. The variables set at the start were as follows: double dR, dCV, dK, dDin, dDout, dRin, dRout dR = Convert.ToDouble(_tblAsphere.Rows[0].ItemArray.GetValue(1)); dCV = convert.ToDouble(_tblAsphere.Rows[1].ItemArray.GetValue(1)); ... and so on Maybe it's just me, but it told me essentially nothing about what they represented, which made understanding the code further down difficult. All I knew was that it was a variable parsed out specific row from a specific table, somewhere. After some searching, I found out what they meant: dR = radius dCV = curvature dK = conic constant dDin = inner aperture dDout = outer aperture dRin = inner radius dRout = outer radius I renamed them to essentially what I have up there. It lengthens some lines, but I feel like that's a fair trade off. This kind of naming scheme is used throughout a lot of the code however. I'm not sure if it's an artifact from developers who learned by working with older systems, or if there's a deeper reason behind it. Is there a good reason to name variables this way, or am I justified in updating them to more descriptive names as I come across them?

    Read the article

  • Should you create a class within a method?

    - by Amndeep7
    I have made a program using Java that is an implementation of this project: http://nifty.stanford.edu/2009/stone-random-art/sml/index.html. Essentially, you create a mathematical expression and, using the pixel coordinate as input, make a picture. After I initially implemented this in serial, I then implemented it in parallel due to the fact that if the picture size is too large or if the mathematical expression is too complex (especially considering the fact that I made the expression recursively), it takes a really long time. During this process, I realized that I needed two classes which implemented the Runnable interface as I had to put in parameters for the run method, which you aren't allowed to do directly. One of these classes ended up being a medium sized static inner class (not large enough to make an independent class file for it though). The other though, just needed a few parameters to determine some indexes and the size of the for loop that I was making run in parallel - here it is: class DataConversionRunnable implements Runnable { int jj, kk, w; DataConversionRunnable(int column, int matrix, int wid) { jj = column; kk = matrix; w = wid; } public void run() { for(int i = 0; i < w; i++) colorvals[kk][jj][i] = (int) ((raw[kk][jj][i] + 1.0) * 255 / 2.0); increaseCounter(); } } My question is should I make it a static inner class or can I just create it in a method? What is the general programming convention followed in this case?

    Read the article

  • XSL Template outputting massive chunk of text, rather than HTML. But only on one section

    - by Throlkim
    I'm having a slightly odd situation with an XSL template. Most of it outputs fine, but a certain for-each loop is causing me problems. Here's the XML: <area> <feature type="Hall"> <Heading><![CDATA[Hall]]></Heading> <Para><![CDATA[Communal gardens, pathway leading to PVCu double glazed communal front door to]]></Para> </feature> <feature type="Entrance Hall"> <Heading><![CDATA[Communal Entrance Hall]]></Heading> <Para><![CDATA[Plain ceiling, centre light fitting, fire door through to inner hallway, wood and glazed panelled front door to]]></Para> </feature> <feature type="Inner Hall"> <Heading><![CDATA[Inner Hall]]></Heading> <Para><![CDATA[Plain ceiling with pendant light fitting and covings, security telephone, airing cupboard housing gas boiler serving domestic hot water and central heating, telephone point, storage cupboard housing gas and electric meters, wooden panelled doors off to all rooms.]]></Para> </feature> <feature type="Lounge (Reception)" width="3.05" length="4.57" units="metre"> <Heading><![CDATA[Lounge (Reception)]]></Heading> <Para><![CDATA[15' 6" x 10' 7" (4.72m x 3.23m) Window to the side and rear elevation, papered ceiling with pendant light fitting and covings, two double panelled radiators, power points, wall mounted security entry phone, TV aerial point.]]></Para> </feature> <feature type="Kitchen" width="3.05" length="3.66" units="metre"> <Heading><![CDATA[Kitchen]]></Heading> <Para><![CDATA[12' x 10' (3.66m x 3.05m) Double glazed window to the rear elevation, textured ceiling with strip lighting, range of base and wall units in Beech with brushed aluminium handles, co-ordinated working surfaces with inset stainless steel sink with mixer taps over, co-ordinated tiled splashbacks, gas and electric cooker points, large storage cupboard with shelving, power points.]]></Para> </feature> <feature type="Entrance Porch"> <Heading><![CDATA[Balcony]]></Heading> <Para><![CDATA[Views across the communal South facing garden, wrought iron balustrade.]]></Para> </feature> <feature type="Bedroom" width="3.35" length="3.96" units="metre"> <Heading><![CDATA[Bedroom One]]></Heading> <Para><![CDATA[13' 6" x 11' 5" (4.11m x 3.48m) Double glazed windows to the front and side elevations, papered ceiling with pendant light fittings and covings, single panelled radiator, power points, telephone point, security entry phone.]]></Para> </feature> <feature type="Bedroom" width="3.05" length="3.35" units="metre"> <Heading><![CDATA[Bedroom Two]]></Heading> <Para><![CDATA[11' 4" x 10' 1" (3.45m x 3.07m) Double glazed window to the front elevation, plain ceiling with centre light fitting and covings, power points.]]></Para> </feature> <feature type="bathroom"> <Heading><![CDATA[Bathroom]]></Heading> <Para><![CDATA[Obscure double glazed window to the rear elevation, textured ceiling with centre light fitting and extractor fan, suite in white comprising of low level WC, wall mounted wash hand basin and walk in shower housing 'Triton T80' electric shower, co-ordinated tiled splashbacks.]]></Para> </feature> </area> And here's the section of my template that processes it: <xsl:for-each select="area"> <li> <xsl:for-each select="feature"> <li> <h5> <xsl:value-of select="Heading"/> </h5> <xsl:value-of select="Para"/> </li> </xsl:for-each> </li> </xsl:for-each> And here's the output: Hall Communal gardens, pathway leading to PVCu double glazed communal front door to Communal Entrance Hall Plain ceiling, centre light fitting, fire door through to inner hallway, wood and glazed panelled front door to Inner Hall Plain ceiling with pendant light fitting and covings, security telephone, airing cupboard housing gas boiler serving domestic hot water and central heating, telephone point, storage cupboard housing gas and electric meters, wooden panelled doors off to all rooms. Lounge (Reception) 15' 6" x 10' 7" (4.72m x 3.23m) Window to the side and rear elevation, papered ceiling with pendant light fitting and covings, two double panelled radiators, power points, wall mounted security entry phone, TV aerial point. Kitchen 12' x 10' (3.66m x 3.05m) Double glazed window to the rear elevation, textured ceiling with strip lighting, range of base and wall units in Beech with brushed aluminium handles, co-ordinated working surfaces with inset stainless steel sink with mixer taps over, co-ordinated tiled splashbacks, gas and electric cooker points, large storage cupboard with shelving, power points. Balcony Views across the communal South facing garden, wrought iron balustrade. Bedroom One 13' 6" x 11' 5" (4.11m x 3.48m) Double glazed windows to the front and side elevations, papered ceiling with pendant light fittings and covings, single panelled radiator, power points, telephone point, security entry phone. Bedroom Two 11' 4" x 10' 1" (3.45m x 3.07m) Double glazed window to the front elevation, plain ceiling with centre light fitting and covings, power points. Bathroom Obscure double glazed window to the rear elevation, textured ceiling with centre light fitting and extractor fan, suite in white comprising of low level WC, wall mounted wash hand basin and walk in shower housing 'Triton T80' electric shower, co-ordinated tiled splashbacks. For reference, here's the entire XSLT: http://pastie.org/private/eq4gjvqoc1amg9ynyf6wzg The rest of it all outputs fine - what am I missing from the above section?

    Read the article

  • Refresh Button in java

    - by lakshmi
    I need to make a simple refresh button for a gui java program I have the button made but its not working properly. I just am not sure what the code needs to be to make the button work. Any help would be really appreciated.I figured the code below ` public class CompanySample extends Panel { DBServiceAsync dbService = GWT.create(DBService.class); Panel panel = new Panel(); public Panel CompanySampledetails(com.viji.example.domain.Record trec, int count) { panel.setWidth(800); Panel borderPanel = new Panel(); Panel centerPanel = new Panel(); final FormPanel formPanel = new FormPanel(); formPanel.setFrame(true); formPanel.setLabelAlign(Position.LEFT); formPanel.setPaddings(5); formPanel.setWidth(800); final Panel inner = new Panel(); inner.setLayout(new ColumnLayout()); Panel columnOne = new Panel(); columnOne.setLayout(new FitLayout()); GridPanel gridPanel = null; if (gridPanel != null) { gridPanel.getView().refresh(); gridPanel.clear(); } gridPanel = new SampleGrid(trec); gridPanel.setHeight(450); gridPanel.setTitle("Company Data"); final RowSelectionModel sm = new RowSelectionModel(true); sm.addListener(new RowSelectionListenerAdapter() { public void onRowSelect(RowSelectionModel sm, int rowIndex, Record record) { formPanel.getForm().loadRecord(record); } }); gridPanel.setSelectionModel(sm); gridPanel.doOnRender(new Function() { public void execute() { sm.selectFirstRow(); } }, 10); columnOne.add(gridPanel); inner.add(columnOne, new ColumnLayoutData(0.6)); final FieldSet fieldSet = new FieldSet(); fieldSet.setLabelWidth(90); fieldSet.setTitle("company Details"); fieldSet.setAutoHeight(true); fieldSet.setBorder(false); final TextField txtcompanyname = new TextField("Name", "companyname", 120); final TextField txtcompanyaddress = new TextField("Address", "companyaddress", 120); final TextField txtcompanyid = new TextField("Id", "companyid", 120); txtcompanyid.setVisible(false); fieldSet.add(txtcompanyid); fieldSet.add(txtcompanyname); fieldSet.add(txtcompanyaddress); final Button addButton = new Button(); final Button deleteButton = new Button(); final Button modifyButton = new Button(); final Button refeshButton = new Button(); addButton.setText("Add"); deleteButton.setText("Delete"); modifyButton.setText("Modify"); refeshButton.setText("Refresh"); fieldSet.add(addButton); fieldSet.add(deleteButton); fieldSet.add(modifyButton); fieldSet.add(refeshButton); final ButtonListenerAdapter buttonClickListener = new ButtonListenerAdapter() { public void onClick(Button button, EventObject e) { if (button == refeshButton) { sendDataToServ("Refresh"); } } }; addButton.addListener(new ButtonListenerAdapter() { @Override public void onClick(Button button, EventObject e) { if (button.getText().equals("Add")) { sendDataToServer("Add"); } } private void sendDataToServer(String action) { String txtcnameToServer = txtcompanyname.getText().trim(); String txtcaddressToServer = txtcompanyaddress.getText().trim(); if (txtcnameToServer.trim().equals("") || txtcaddressToServer.trim().equals("")) { Window .alert("Incomplete Data. Fill/Select all the needed fields"); action = "Nothing"; } AsyncCallback ascallback = new AsyncCallback<String>() { @Override public void onFailure(Throwable caught) { Window.alert("Record not inserted"); } @Override public void onSuccess(String result) { Window.alert("Record inserted"); } }; if (action.trim().equals("Add")) { System.out.println("Before insertServer"); dbService.insertCompany(txtcnameToServer, txtcaddressToServer, ascallback); } } }); deleteButton.addListener(new ButtonListenerAdapter() { @Override public void onClick(Button button, EventObject e) { if (button.getText().equals("Delete")) { sendDataToServer("Delete"); } } private void sendDataToServer(String action) { String txtcidToServer = txtcompanyid.getText().trim(); String txtcnameToServer = txtcompanyname.getText().trim(); String txtcaddressToServer = txtcompanyaddress.getText().trim(); if (!action.equals("Delete")) { if (txtcidToServer.trim().equals("") || txtcnameToServer.trim().equals("") || txtcaddressToServer.trim().equals("")) { Window .alert("Incomplete Data. Fill/Select all the needed fields"); action = "Nothing"; } } else if (txtcidToServer.trim().equals("")) { Window.alert("Doesn't deleted any row"); } AsyncCallback ascallback = new AsyncCallback<String>() { @Override public void onFailure(Throwable caught) { // TODO Auto-generated method stub Window.alert("Record not deleted"); } @Override public void onSuccess(String result) { Window.alert("Record deleted"); } }; if (action.trim().equals("Delete")) { System.out.println("Before deleteServer"); dbService.deleteCompany(Integer.parseInt(txtcidToServer), ascallback); } } }); modifyButton.addListener(new ButtonListenerAdapter() { @Override public void onClick(Button button, EventObject e) { if (button.getText().equals("Modify")) { sendDataToServer("Modify"); } } private void sendDataToServer(String action) { // TODO Auto-generated method stub System.out.println("ACTION :----->" + action); String txtcidToServer = txtcompanyid.getText().trim(); String txtcnameToServer = txtcompanyname.getText().trim(); String txtcaddressToServer = txtcompanyaddress.getText().trim(); if (txtcnameToServer.trim().equals("") || txtcaddressToServer.trim().equals("")) { Window .alert("Incomplete Data. Fill/Select all the needed fields"); action = "Nothing"; } AsyncCallback ascallback = new AsyncCallback<String>() { @Override public void onFailure(Throwable caught) { Window.alert("Record not Updated"); } @Override public void onSuccess(String result) { Window.alert("Record Updated"); } }; if (action.equals("Modify")) { System.out.println("Before UpdateServer"); dbService.modifyCompany(Integer.parseInt(txtcidToServer), txtcnameToServer, txtcaddressToServer, ascallback); } } }); inner.add(new PaddedPanel(fieldSet, 0, 10, 0, 0), new ColumnLayoutData( 0.4)); formPanel.add(inner); borderPanel.add(centerPanel, new BorderLayoutData(RegionPosition.CENTER)); centerPanel.add(formPanel); panel.add(borderPanel); return panel; } public void sendDataToServ(String action) { AsyncCallback<com.viji.example.domain.Record> callback = new AsyncCallback<com.viji.example.domain.Record>() { @Override public void onFailure(Throwable caught) { System.out.println("Failure"); } public void onSuccess(com.viji.example.domain.Record result) { CompanySampledetails(result, 1); } }; dbService.getRecords(callback); } } class SampleGrid extends GridPanel { private static BaseColumnConfig[] columns = new BaseColumnConfig[] { new ColumnConfig("Name", "companyname", 120, true), new ColumnConfig("Address", "companyaddress", 120, true), }; private static RecordDef recordDef = new RecordDef(new FieldDef[] { new IntegerFieldDef("companyid"), new StringFieldDef("companyname"), new StringFieldDef("companyaddress") }); public SampleGrid(com.viji.example.domain.Record trec) { Object[][] data = new Object[0][];// getCompanyDataSmall(); MemoryProxy proxy = new MemoryProxy(data); ArrayReader reader = new ArrayReader(recordDef); Store store = new SimpleStore(new String[] { "companyid", "companyname", "companyaddress" }, new Object[0][]); store.load(); ArrayList<Company> Companydetails = trec.getCompanydetails(); for (int i = 0; i < Companydetails.size(); i++) { Company company = Companydetails.get(i); store.add(recordDef.createRecord(new Object[] { company.getCompanyid(), company.getCompanyName(), company.getCompanyaddress() })); } store.commitChanges(); setStore(store); ColumnModel columnModel = new ColumnModel(columns); setColumnModel(columnModel); } } `

    Read the article

  • How to generate DELETE statements in PL/SQL, based on the tables FK relations?

    - by The chicken in the kitchen
    Is it possible via script/tool to generate authomatically many delete statements based on the tables fk relations, using Oracle PL/SQL? In example: I have the table: CHICKEN (CHICKEN_CODE NUMBER) and there are 30 tables with fk references to its CHICKEN_CODE that I need to delete; there are also other 150 tables foreign-key-linked to that 30 tables that I need to delete first. Is there some tool/script PL/SQL that I can run in order to generate all the necessary delete statements based on the FK relations for me? (by the way, I know about cascade delete on the relations, but please pay attention: I CAN'T USE IT IN MY PRODUCTION DATABASE, because it's dangerous!) I'm using Oracle DataBase 10G R2. This is the result I've written, but it is not recursive: This is a view I have previously written, but of course it is not recursive! CREATE OR REPLACE FORCE VIEW RUN ( OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME, VINCOLO ) AS SELECT OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME, '(' || LTRIM ( EXTRACT (XMLAGG (XMLELEMENT ("x", ',' || COLUMN_NAME)), '/x/text()'), ',') || ')' VINCOLO FROM ( SELECT CON1.OWNER OWNER_1, CON1.TABLE_NAME TABLE_NAME_1, CON1.CONSTRAINT_NAME CONSTRAINT_NAME_1, CON1.DELETE_RULE, CON1.STATUS, CON.TABLE_NAME, CON.CONSTRAINT_NAME, COL.POSITION, COL.COLUMN_NAME FROM DBA_CONSTRAINTS CON, DBA_CONS_COLUMNS COL, DBA_CONSTRAINTS CON1 WHERE CON.OWNER = 'TABLE_OWNER' AND CON.TABLE_NAME = 'TABLE_OWNED' AND ( (CON.CONSTRAINT_TYPE = 'P') OR (CON.CONSTRAINT_TYPE = 'U')) AND COL.TABLE_NAME = CON1.TABLE_NAME AND COL.CONSTRAINT_NAME = CON1.CONSTRAINT_NAME --AND CON1.OWNER = CON.OWNER AND CON1.R_CONSTRAINT_NAME = CON.CONSTRAINT_NAME AND CON1.CONSTRAINT_TYPE = 'R' GROUP BY CON1.OWNER, CON1.TABLE_NAME, CON1.CONSTRAINT_NAME, CON1.DELETE_RULE, CON1.STATUS, CON.TABLE_NAME, CON.CONSTRAINT_NAME, COL.POSITION, COL.COLUMN_NAME) GROUP BY OWNER_1, CONSTRAINT_NAME_1, TABLE_NAME_1, TABLE_NAME; ... and it contains the error of using DBA_CONSTRAINTS instead of ALL_CONSTRAINTS... Please pay attention to this: http://stackoverflow.com/questions/485581/generate-delete-statement-from-foreign-key-relationships-in-sql-2008/2677145#2677145 Another user has just written it in SQL SERVER 2008, anyone is able to convert to Oracle 10G PL/SQL? I am not able to... :-( This is the code written by another user in SQL SERVER 2008: DECLARE @COLUMN_NAME AS sysname DECLARE @TABLE_NAME AS sysname DECLARE @IDValue AS int SET @COLUMN_NAME = '<Your COLUMN_NAME here>' SET @TABLE_NAME = '<Your TABLE_NAME here>' SET @IDValue = 123456789 DECLARE @sql AS varchar(max) ; WITH RELATED_COLUMNS AS ( SELECT QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME) AS [OBJECT_NAME] ,c.COLUMN_NAME FROM PBANKDW.INFORMATION_SCHEMA.COLUMNS AS c WITH (NOLOCK) INNER JOIN PBANKDW.INFORMATION_SCHEMA.TABLES AS t WITH (NOLOCK) ON c.TABLE_CATALOG = t.TABLE_CATALOG AND c.TABLE_SCHEMA = t.TABLE_SCHEMA AND c.TABLE_NAME = t.TABLE_NAME AND t.TABLE_TYPE = 'BASE TABLE' INNER JOIN ( SELECT rc.CONSTRAINT_CATALOG ,rc.CONSTRAINT_SCHEMA ,lkc.TABLE_NAME ,lkc.COLUMN_NAME FROM PBANKDW.INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS rc WITH (NOLOCK) INNER JOIN PBANKDW.INFORMATION_SCHEMA.KEY_COLUMN_USAGE lkc WITH (NOLOCK) ON lkc.CONSTRAINT_CATALOG = rc.CONSTRAINT_CATALOG AND lkc.CONSTRAINT_SCHEMA = rc.CONSTRAINT_SCHEMA AND lkc.CONSTRAINT_NAME = rc.CONSTRAINT_NAME INNER JOIN PBANKDW.INFORMATION_SCHEMA.TABLE_CONSTRAINTS tc WITH (NOLOCK) ON rc.CONSTRAINT_CATALOG = tc.CONSTRAINT_CATALOG AND rc.CONSTRAINT_SCHEMA = tc.CONSTRAINT_SCHEMA AND rc.UNIQUE_CONSTRAINT_NAME = tc.CONSTRAINT_NAME INNER JOIN PBANKDW.INFORMATION_SCHEMA.KEY_COLUMN_USAGE rkc WITH (NOLOCK) ON rkc.CONSTRAINT_CATALOG = tc.CONSTRAINT_CATALOG AND rkc.CONSTRAINT_SCHEMA = tc.CONSTRAINT_SCHEMA AND rkc.CONSTRAINT_NAME = tc.CONSTRAINT_NAME WHERE rkc.COLUMN_NAME = @COLUMN_NAME AND rkc.TABLE_NAME = @TABLE_NAME ) AS j ON j.CONSTRAINT_CATALOG = c.TABLE_CATALOG AND j.CONSTRAINT_SCHEMA = c.TABLE_SCHEMA AND j.TABLE_NAME = c.TABLE_NAME AND j.COLUMN_NAME = c.COLUMN_NAME ) SELECT @sql = COALESCE(@sql, '') + 'DELETE FROM ' + [OBJECT_NAME] + ' WHERE ' + [COLUMN_NAME] + ' = ' + CONVERT(varchar, @IDValue) + CHAR(13) + CHAR(10) FROM RELATED_COLUMNS PRINT @sql Thank to Charles, this is the latest not working release of the software, I have added a parameter with the OWNER because the referential integrities propagate through about 5 other Oracle users (!!!): CREATE OR REPLACE PROCEDURE delete_cascade ( parent_table VARCHAR2, parent_table_owner VARCHAR2) IS cons_name VARCHAR2 (30); tab_name VARCHAR2 (30); tab_name_owner VARCHAR2 (30); parent_cons VARCHAR2 (30); parent_col VARCHAR2 (30); delete1 VARCHAR (500); delete2 VARCHAR (500); delete_command VARCHAR (4000); CURSOR cons_cursor IS SELECT constraint_name, r_constraint_name, table_name, constraint_type FROM all_constraints WHERE constraint_type = 'R' AND r_constraint_name IN (SELECT constraint_name FROM all_constraints WHERE constraint_type IN ('P', 'U') AND table_name = parent_table AND owner = parent_table_owner) AND delete_rule = 'NO ACTION'; CURSOR tabs_cursor IS SELECT DISTINCT table_name FROM all_cons_columns WHERE constraint_name = cons_name; CURSOR child_cols_cursor IS SELECT column_name, position FROM all_cons_columns WHERE constraint_name = cons_name AND table_name = tab_name; BEGIN FOR cons IN cons_cursor LOOP cons_name := cons.constraint_name; parent_cons := cons.r_constraint_name; SELECT DISTINCT table_name, owner INTO tab_name, tab_name_owner FROM all_cons_columns WHERE constraint_name = cons_name; delete_cascade (tab_name, tab_name_owner); delete_command := ''; delete1 := ''; delete2 := ''; FOR col IN child_cols_cursor LOOP SELECT DISTINCT column_name INTO parent_col FROM all_cons_columns WHERE constraint_name = parent_cons AND position = col.position; IF delete1 IS NULL THEN delete1 := col.column_name; ELSE delete1 := delete1 || ', ' || col.column_name; END IF; IF delete2 IS NULL THEN delete2 := parent_col; ELSE delete2 := delete2 || ', ' || parent_col; END IF; END LOOP; delete_command := 'delete from ' || tab_name_owner || '.' || tab_name || ' where (' || delete1 || ') in (select ' || delete2 || ' from ' || parent_table_owner || '.' || parent_table || ');'; INSERT INTO ris VALUES (SEQUENCE_COMANDI.NEXTVAL, delete_command); COMMIT; END LOOP; END; / In the cursor CONS_CURSOR I have added the condition: AND delete_rule = 'NO ACTION'; in order to avoid deletion in case of referential integrities with DELETE_RULE = 'CASCADE' or DELETE_RULE = 'SET NULL'. Now I have tried to turn from stored procedure to stored function, but the delete statements are not correct: CREATE OR REPLACE FUNCTION deletecascade ( parent_table VARCHAR2, parent_table_owner VARCHAR2) RETURN VARCHAR2 IS cons_name VARCHAR2 (30); tab_name VARCHAR2 (30); tab_name_owner VARCHAR2 (30); parent_cons VARCHAR2 (30); parent_col VARCHAR2 (30); delete1 VARCHAR (500); delete2 VARCHAR (500); delete_command VARCHAR (4000); AT_LEAST_ONE_ITERATION NUMBER DEFAULT 0; CURSOR cons_cursor IS SELECT constraint_name, r_constraint_name, table_name, constraint_type FROM all_constraints WHERE constraint_type = 'R' AND r_constraint_name IN (SELECT constraint_name FROM all_constraints WHERE constraint_type IN ('P', 'U') AND table_name = parent_table AND owner = parent_table_owner) AND delete_rule = 'NO ACTION'; CURSOR tabs_cursor IS SELECT DISTINCT table_name FROM all_cons_columns WHERE constraint_name = cons_name; CURSOR child_cols_cursor IS SELECT column_name, position FROM all_cons_columns WHERE constraint_name = cons_name AND table_name = tab_name; BEGIN FOR cons IN cons_cursor LOOP AT_LEAST_ONE_ITERATION := 1; cons_name := cons.constraint_name; parent_cons := cons.r_constraint_name; SELECT DISTINCT table_name, owner INTO tab_name, tab_name_owner FROM all_cons_columns WHERE constraint_name = cons_name; delete1 := ''; delete2 := ''; FOR col IN child_cols_cursor LOOP SELECT DISTINCT column_name INTO parent_col FROM all_cons_columns WHERE constraint_name = parent_cons AND position = col.position; IF delete1 IS NULL THEN delete1 := col.column_name; ELSE delete1 := delete1 || ', ' || col.column_name; END IF; IF delete2 IS NULL THEN delete2 := parent_col; ELSE delete2 := delete2 || ', ' || parent_col; END IF; END LOOP; delete_command := 'delete from ' || tab_name_owner || '.' || tab_name || ' where (' || delete1 || ') in (select ' || delete2 || ' from ' || parent_table_owner || '.' || parent_table || ');' || deletecascade (tab_name, tab_name_owner); INSERT INTO ris VALUES (SEQUENCE_COMANDI.NEXTVAL, delete_command); COMMIT; END LOOP; IF AT_LEAST_ONE_ITERATION = 1 THEN RETURN ' where COD_CHICKEN = V_CHICKEN AND COD_NATION = V_NATION;'; ELSE RETURN NULL; END IF; END; / Please assume that V_CHICKEN and V_NATION are the criteria to select the CHICKEN to delete from the root table: the condition is: "where COD_CHICKEN = V_CHICKEN AND COD_NATION = V_NATION" on the root table.

    Read the article

  • Unknown Space between 2 Container Divs

    - by Paul
    Im trying to determine why there would be space between 2 Containing Divs as shown, and I would appreciate any insight as to why this is occurring: The unknown space occurs between the mid-feature div (olive) and bottom-wrap div (orange) I have no heights set anywhere. I would like to see the orange div up against the olive div just above it. I can post all of the CSS, or you can FireBug this: www.davincispainting.com Here is all of the CSS: *{ margin:0; padding:0 } body { /*background: url("/images/blueback5.jpg") repeat-x scroll 0 0 transparent;*/ background-color: #9EB0C8; font-family: Arial,Helvetica,sans-serif; font-size: 62.5%; } #top-wrap { height: 126px; width: 940px; /*background-color: Yellow;*/ margin: 5px 0 0 0; } #head-logo { background: url("/images/logo3.png") no-repeat scroll 0 0 transparent; /*background-color: Green;*/ height: 126px; width: 214px; margin: 0px 0 0 58px; position: absolute; z-index: 100; } #submenu1 { border: 0 solid #000000; color: #FFFFFF; /*background-color:Green;*/ font-family: Arial,Impact,Impact5,Charcoal6,sans-serif; font-size: 1.6em; height: 35px; width: 155px; /*padding: 10px 0 0;*/ margin: 7px 0 0 774px; position: absolute; } #submenu2 { /*border: 0 solid #000000;*/ color: #FFFFFF; /*background-color:Blue;*/ font-family: Arial,Impact,Impact5,Charcoal6,sans-serif; font-size: 1.8em; text-align: right; height: 20px; width: 114px; margin: 30px 0 0 818px; /*padding: 5px 0 0;*/ } a.contact { background-image: url("/images/RapidButton2.png"); /*border: 1px solid #CCCCCC;*/ /*clear: both;*/ /*color: #FFFFFF;*/ display: block; font-size: 11px; /*margin-bottom: 1px;*/ /*padding: 3px 5px;*/ text-align: center; width: 165px; height: 27px; } a.contact:hover { background-image: url("/images/RapidButtonHov2.png"); } #navigation-primary { margin: 12px 0 0 276px; position: absolute; } #global-wrap { margin: 0 auto; text-align: left; width: 880px; overflow: hidden; } #global-inner { background: url("/images/main_bg.gif") repeat-y scroll 0 0 #E4EAEF; font-family: Arial; font-size: 1.2em; margin: 15px 0 55px 0; overflow: hidden; text-align: left; width: 880px; } #global-inner .topleft { background: url("/images/main_left_top_corner2.jpg") no-repeat scroll left top transparent; float: left; height: 9px; width: 9px; } #global-inner .topright { background: url("/images/main_right_top_corner2.jpg") no-repeat scroll right top transparent; float: right; height: 9px; width: 9px; } #global-inner .bottomleft { background: url("/images/main_left_bottom_corner.jpg") no-repeat scroll left bottom transparent; float: left; height: 9px; margin-top: -8px; /*margin: 776px 0 0 0;*/ width: 9px; } #global-inner .bottomright { background: url("/images/main_right_bottom_corner.jpg") no-repeat scroll right bottom transparent; float: right; height: 9px; margin-top: -8px; /*margin: 776px 0 0 0;*/ width: 9px; } #top-feature { height:330px; width: 848px; margin: 12px 0 0 16px; background: #E4EAEF; /*background: orange;*/ /*padding: 10px 0 0 10px;*/ position: absolute; text-align: left; } .slideshow { height: 330px; width: 848px; margin: 0 0 0 0; /*background: blue;*/ position: absolute; } #mid-feature { margin:350px 0 0 16px; width:848px; height:318px; background-color:Olive; position:relative; overflow:hidden; } #mid-featureleft { height:318px; width:552px; /*background-color:Purple;*/ float:left; position:relative; } #mid-featureright { height:318px; width:296px; background-color:#B9C1CC; /*background-color: red;*/ float:left; position: relative; } #mid-featureleft h1 { color: #FF0000; font-family: Arial,Helvetica,sans-serif; font-size: 2.1em; } #mid-featureleft .contentbox { padding:7px 7px 7px 7px; } #mid-featureleft p { color: #0C2A55; margin:0px 0 11px 0px; /*font-style:normal;*/ /*width: 97%;*/ /*font-size: .5em;*/ font-size: 12px; } #bottom-wrap { height:60px; width: 868px; margin: auto 0 0 6px; background:orange; position: relative; } #copyright { float: left; /*background-color:Teal;*/ width: 260px; height: 60px; text-align: left; position: absolute; margin:0 0 0 6px; } #bottom-logos { height:60px; width:596px; margin:0 0 0 267px; background: url("/images/logos2.png") no-repeat scroll 0 0 transparent; /*background-color:red;*/ position:absolute; }

    Read the article

  • Using the new CSS Analyzer in JavaFX Scene Builder

    - by Jerome Cambon
    As you know, JavaFX provides from the API many properties that you can set to customize or make your components to behave as you want. For instance, for a Button, you can set its font, or its max size.Using Scene Builder, these properties can be explored and modified using the inspector. However, JavaFX also provides many other properties to have a fine grained customization of your components : the css properties. These properties are typically set from a css stylesheet. For instance, you can set a background image on a Button, change the Button corners, etc... Using Scene Builder, until now, you could set a css property using the inspector Style and Stylesheet editors. But you had to go to the JavaFX css documentation to know the css properties that can be applied to a given component. Hopefully, Scene Builder 1.1 added recently a very interesting new feature : the CSS Analyzer.It allows you to explore all the css properties available for a JavaFX component, and helps you to build your css rules. A very simple example : make a Button rounded Let’s take a very simple example:you would like to customize your Buttons to make them rounded. First, enable the CSS Analyzer, using the ‘View->Show CSS Analyzer’ menu. Grow the main window, and the CSS Analyzer to get more room: Then, drop a Button from the Library to the ContentView: the CSS Analyzer is now showing the Button css properties: As you can see, there is a ‘-fx-background-radius’ css property that allow to define the radius of the background (note that you can get the associated css documentation by clicking on the property name). You can then experiment this by setting the Button style property from the inspector: As you can see in the css doc, one can set the same radius for the 4 corners by a simple number. Once the style value is applied, the Button is now rounded, as expected.Look at the CSS Analyzer: the ‘-fx-background-radius’ property has now 2 entries: the default one, and the one we just entered from the Style property. The new value “win”: it overrides the default one, and become the actual value (to highlight this, the cell background becomes blue). Now, you will certainly prefer to apply this new style to all the Buttons of your FXML document, and have a css rule for this.To do this, save you document first, and create a css file in the same directory than the new document.Create an empty css file (e.g. test.css), and attach it the the root AnchorPane, by first selecting the AnchorPane, then using the Stylesheets editor from the inspector: Add the corresponding css rule to your new test.css file, from your preferred editor (Netbeans for me ;-) and save it. .button { -fx-background-radius: 10px;} Now, select your Button and have a look at the CSS Analyzer. As you can see, the Button is inheriting the css rule (since the Button is a child of the AnchorPane), and still have its inline Style. The Inline style “win”, since it has precedence on the stylesheet. The CSS Analyzer columns are displayed by precedence order.Note the small right-arrow icons, that allow to jump to the source of the value (either test.css, or the inspector in this case).Of course, unless you want to set a specific background radius for this particular Button, you can remove the inline Style from the inspector. Changing the color of a TitledPane arrow In some cases, it can be useful to be able to select the inner element you want to style directly from the Content View . Drop a TitledPane to the Content View. Then select from the CSS Analyzer the CSS cursor (the other cursor on the left allow you to come back to ‘standard’ selection), that will allow to select an inner element: height: 62px;" align="LEFT" border="0"> … and select the TitledPane arrow, that will get a yellow background: … and the Styleable Path is updated: To define a new css rule, you can first copy the Styleable path : .. then paste it in your test.css file. Then, add an entry to set the -fx-background-color to red. You should have something like: .titled-pane:expanded .title .arrow-button .arrow { -fx-background-color : red;} As soon as the test.css is saved, the change is taken into account in Scene Builder. You can also use the Styleable Path to discover all the inner elements of TitledPane, by clicking on the arrow icon: More details You can see the CSS Analyzer in action (and many other features) from the Java One BOF: BOF4279 - In-Depth Layout and Styling with the JavaFX Scene Builder presented by my colleague Jean-Francois Denise. On the right hand, click on the Media link to go to the video (streaming) of the presa. The Scene Builder support of CSS starts at 9:20 The CSS Analyzer presentation starts at 12:50

    Read the article

  • Connection Pooling is Busted

    - by MightyZot
    A few weeks ago we started getting complaints about performance in an application that has performed very well for many years.  The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database.  Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc.  (PaperWise is a document management and workflow system.)  A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler.  All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero.  After getting nowhere with SQL Profiler, the situation was escalated to me.  I decided to take a peek with Process Monitor.  Procmon revealed some “gaps” in the TCP/IP traffic.  There were notable delays between send and receive pairs.  The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send.  You might expect some delay because, presumably, the application is doing some thinking in-between the pairs.  But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed.  Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms.  Not only that, but connections to a file share containing images were taking 2 seconds!  So, I asked about a trust.  Sure enough there was a trust between two domains and the file share was on the second domain.  Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share.  Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets.  TDS is the protocol that SQL Server uses to communicate.  There is a certificate exchange and some SSL that occurs during authentication.  All of this was evident in the network traffic.  After staring at the network traffic for a while, and examining packets, I decided to call it a night.  On the way home that night, something about the traffic kept nagging at me.  Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well.  Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port.  After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports.  SQL Server would execute a single query and respond on a port, then open a new port and execute the next query.  Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis.  Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop.  Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection.  After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors.  Server-side cursors are the default, by the way.  Voila!  After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away.  Believe it or not, this is actually documented by Microsoft, and rather difficult to find.  (At least it was while we were trying to troubleshoot the problem!)  So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor.  If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries.  I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries.  In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two.  Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem.  Maybe they can explain to us why this is appropriate behavior.  :)

    Read the article

  • Guide to reduce TFS database growth using the Test Attachment Cleaner

    - by terje
    Recently there has been several reports on TFS databases growing too fast and growing too big.  Notable this has been observed when one has started to use more features of the Testing system.  Also, the TFS 2010 handles test results differently from TFS 2008, and this leads to more data stored in the TFS databases. As a consequence of this there has been released some tools to remove unneeded data in the database, and also some fixes to correct for bugs which has been found and corrected during this process.  Further some preventive practices and maintenance rules should be adopted. A lot of people have blogged about this, among these are: Anu’s very important blog post here describes both the problem and solutions to handle it.  She describes both the Test Attachment Cleaner tool, and also some QFE/CU releases to fix some underlying bugs which prevented the tool from being fully effective. Brian Harry’s blog post here describes the problem too This forum thread describes the problem with some solution hints. Ravi Shanker’s blog post here describes best practices on solving this (TBP) Grant Holidays blogpost here describes strategies to use the Test Attachment Cleaner both to detect space problems and how to rectify them.   The problem can be divided into the following areas: Publishing of test results from builds Publishing of manual test results and their attachments in particular Publishing of deployment binaries for use during a test run Bugs in SQL server preventing total cleanup of data (All the published data above is published into the TFS database as attachments.) The test results will include all data being collected during the run.  Some of this data can grow rather large, like IntelliTrace logs and video recordings.   Also the pushing of binaries which happen for automated test runs, including tests run during a build using code coverage which will include all the files in the deployment folder, contributes a lot to the size of the attached data.   In order to handle this systematically, I have set up a 3-stage process: Find out if you have a database space issue Set up your TFS server to minimize potential database issues If you have the “problem”, clean up the database and otherwise keep it clean   Analyze the data Are your database( s) growing ?  Are unused test results growing out of proportion ? To find out about this you need to query your TFS database for some of the information, and use the Test Attachment Cleaner (TAC) to obtain some  more detailed information. If you don’t have too many databases you can use the SQL Server reports from within the Management Studio to analyze the database and table sizes. Or, you can use a set of queries . I find queries often faster to use because I can tweak them the way I want them.  But be aware that these queries are non-documented and non-supported and may change when the product team wants to change them. If you have multiple Project Collections, find out which might have problems: (Disclaimer: The queries below work on TFS 2010. They will not work on Dev-11, since the table structure have been changed.  I will try to update them for Dev-11 when it is released.) Open a SQL Management Studio session onto the SQL Server where you have your TFS Databases. Use the query below to find the Project Collection databases and their sizes, in descending size order.  use master select DB_NAME(database_id) AS DBName, (size/128) SizeInMB FROM sys.master_files where type=0 and substring(db_name(database_id),1,4)='Tfs_' and DB_NAME(database_id)<>'Tfs_Configuration' order by size desc Doing this on one of our SQL servers gives the following results: It is pretty easy to see on which collection to start the work   Find out which tables are possibly too large Keep a special watch out for the Tfs_Attachment table. Use the script at the bottom of Grant’s blog to find the table sizes in descending size order. In our case we got this result: From Grant’s blog we learnt that the tbl_Content is in the Version Control category, so the major only big issue we have here is the tbl_AttachmentContent.   Find out which team projects have possibly too large attachments In order to use the TAC to find and eventually delete attachment data we need to find out which team projects have these attachments. The team project is a required parameter to the TAC. Use the following query to find this, replace the collection database name with whatever applies in your case:   use Tfs_DefaultCollection select p.projectname, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by p.projectname order by sum(a.compressedlength) desc In our case we got this result (had to remove some names), out of more than 100 team projects accumulated over quite some years: As can be seen here it is pretty obvious the “Byggtjeneste – Projects” are the main team project to take care of, with the ones on lines 2-4 as the next ones.  Check which attachment types takes up the most space It can be nice to know which attachment types takes up the space, so run the following query: use Tfs_DefaultCollection select a.attachmenttype, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by a.attachmenttype order by sum(a.compressedlength) desc We then got this result: From this it is pretty obvious that the problem here is the binary files, as also mentioned in Anu’s blog. Check which file types, by their extension, takes up the most space Run the following query use Tfs_DefaultCollection select SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999)as Extension, sum(compressedlength)/1024 as SizeInKB from tbl_Attachment group by SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999) order by sum(compressedlength) desc This gives a result like this:   Now you should have collected enough information to tell you what to do – if you got to do something, and some of the information you need in order to set up your TAC settings file, both for a cleanup and for scheduled maintenance later.    Get your TFS server and environment properly set up Even if you have got the problem or if have yet not got the problem, you should ensure the TFS server is set up so that the risk of getting into this problem is minimized.  To ensure this you should install the following set of updates and components. The assumption is that your TFS Server is at SP1 level. Install the QFE for KB2608743 – which also contains detailed instructions on its use, download from here. The QFE changes the default settings to not upload deployed binaries, which are used in automated test runs. Binaries will still be uploaded if: Code coverage is enabled in the test settings. You change the UploadDeploymentItem to true in the testsettings file. Be aware that this might be reset back to false by another user which haven't installed this QFE. The hotfix should be installed to The build servers (the build agents) The machine hosting the Test Controller Local development computers (Visual Studio) Local test computers (MTM) It is not required to install it to the TFS Server, test agents or the build controller – it has no effect on these programs. If you use the SQL Server 2008 R2 you should also install the CU 10 (or later).  This CU fixes a potential problem of hanging “ghost” files.  This seems to happen only in certain trigger situations, but to ensure it doesn’t bite you, it is better to make sure this CU is installed. There is no such CU for SQL Server 2008 pre-R2 Work around:  If you suspect hanging ghost files, they can be – with some mental effort, deduced from the ghost counters using the following SQL query: use master SELECT DB_NAME(database_id) as 'database',OBJECT_NAME(object_id) as 'objectname', index_type_desc,ghost_record_count,version_ghost_record_count,record_count,avg_record_size_in_bytes FROM sys.dm_db_index_physical_stats (DB_ID(N'<DatabaseName>'), OBJECT_ID(N'<TableName>'), NULL, NULL , 'DETAILED') The problem is a stalled ghost cleanup process.  Restarting the SQL server after having stopped all components that depends on it, like the TFS Server and SPS services – that is all applications that connect to the SQL server. Then restart the SQL server, and finally start up all dependent processes again.  (I would guess a complete server reboot would do the trick too.) After this the ghost cleanup process will run properly again. The fix will come in the next CU cycle for SQL Server R2 SP1.  The R2 pre-SP1 and R2 SP1 have separate maintenance cycles, and are maintained individually. Each have its own set of CU’s. When it comes I will add the link here to that CU. The "hanging ghost file” issue came up after one have run the TAC, and deleted enourmes amount of data.  The SQL Server can get into this hanging state (without the QFE) in certain cases due to this. And of course, install and set up the Test Attachment Cleaner command line power tool.  This should be done following some guidelines from Ravi Shanker: “When you run TAC, ensure that you are deleting small chunks of data at regular intervals (say run TAC every night at 3AM to delete data that is between age 730 to 731 days) – this will ensure that small amounts of data are being deleted and SQL ghosted record cleanup can catch up with the number of deletes performed. “ This rule minimizes the risk of the ghosted hang problem to occur, and further makes it easier for the SQL server ghosting process to work smoothly. “Run DBCC SHRINKDB post the ghosted records are cleaned up to physically reclaim the space on the file system” This is the last step in a 3 step process of removing SQL server data. First they are logically deleted. Then they are cleaned out by the ghosting process, and finally removed using the shrinkdb command. Cleaning out the attachments The TAC is run from the command line using a set of parameters and controlled by a settingsfile.  The parameters point out a server uri including the team project collection and also point at a specific team project. So in order to run this for multiple team projects regularly one has to set up a script to run the TAC multiple times, once for each team project.  When you install the TAC there is a very useful readme file in the same directory. When the deployment binaries are published to the TFS server, ALL items are published up from the deployment folder. That often means much more files than you would assume are necessary. This is a brute force technique. It works, but you need to take care when cleaning up. Grant has shown how their settings file looks in his blog post, removing all attachments older than 180 days , as long as there are no active workitems connected to them. This setting can be useful to clean out all items, both in a clean-up once operation, and in a general There are two scenarios we need to consider: Cleaning up an existing overgrown database Maintaining a server to avoid an overgrown database using scheduled TAC   1. Cleaning up a database which has grown too big due to these attachments. This job is a “Once” job.  We do this once and then move on to make sure it won’t happen again, by taking the actions in 2) below.  In this scenario you should only consider the large files. Your goal should be to simply reduce the size, and don’t bother about  the smaller stuff. That can be left a scheduled TAC cleanup ( 2 below). Here you can use a very general settings file, and just remove the large attachments, or you can choose to remove any old items.  Grant’s settings file is an example of the last one.  A settings file to remove only large attachments could look like this: <!-- Scenario : Remove large files --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> </Attachment> </DeletionCriteria> Or like this: If you want only to remove dll’s and pdb’s about that size, add an Extensions-section.  Without that section, all extensions will be deleted. <!-- Scenario : Remove large files of type dll's and pdb's --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="dll" /> <Include value="pdb" /> </Extensions> </Attachment> </DeletionCriteria> Before you start up your scheduled maintenance, you should clear out all older items. 2. Scheduled maintenance using the TAC If you run a schedule every night, and remove old items, and also remove them in small batches.  It is important to run this often, like every night, in order to keep the number of deleted items low. That way the SQL ghost process works better. One approach could be to delete all items older than some number of days, let’s say 180 days. This could be combined with restricting it to keep attachments with active or resolved bugs.  Doing this every night ensures that only small amounts of data is deleted. <!-- Scenario : Remove old items except if they have active or resolved bugs --> <DeletionCriteria> <TestRun> <AgeInDays OlderThan="180" /> </TestRun> <Attachment /> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved"/> </LinkedBugs> </DeletionCriteria> In my experience there are projects which are left with active or resolved workitems, akthough no further work is done.  It can be wise to have a cleanup process with no restrictions on linked bugs at all. Note that you then have to remove the whole LinkedBugs section. A approach which could work better here is to do a two step approach, use the schedule above to with no LinkedBugs as a sweeper cleaning task taking away all data older than you could care about.  Then have another scheduled TAC task to take out more specifically attachments that you are not likely to use. This task could be much more specific, and based on your analysis clean out what you know is troublesome data. <!-- Scenario : Remove specific files early --> <DeletionCriteria> <TestRun > <AgeInDays OlderThan="30" /> </TestRun> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="iTrace"/> <Include value="dll"/> <Include value="pdb"/> <Include value="wmv"/> </Extensions> </Attachment> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved" /> </LinkedBugs> </DeletionCriteria> The readme document for the TAC says that it recognizes “internal” extensions, but it does recognize any extension. To run the tool do the following command: tcmpt attachmentcleanup /collection:your_tfs_collection_url /teamproject:your_team_project /settingsfile:path_to_settingsfile /outputfile:%temp%/teamproject.tcmpt.log /mode:delete   Shrinking the database You could run a shrink database command after the TAC has run in cases where there are a lot of data being deleted.  In this case you SHOULD do it, to free up all that space.  But, after the shrink operation you should do a rebuild indexes, since the shrink operation will leave the database in a very fragmented state, which will reduce performance. Note that you need to rebuild indexes, reorganizing is not enough. For smaller amounts of data you should NOT shrink the database, since the data will be reused by the SQL server when it need to add more records.  In fact, it is regarded as a bad practice to shrink the database regularly.  So on a daily maintenance schedule you should NOT shrink the database. To shrink the database you do a DBCC SHRINKDATABASE command, and then follow up with a DBCC INDEXDEFRAG afterwards.  I find the easiest way to do this is to create a SQL Maintenance plan including the Shrink Database Task and the Rebuild Index Task and just execute it when you need to do this.

    Read the article

  • MVVM: How to handle interaction between nested ViewModels?

    - by Dan Bryant
    I'm been experimenting with the oft-mentioned MVVM pattern and I've been having a hard time defining clear boundaries in some cases. In my application, I have a dialog that allows me to create a Connection to a Controller. There is a ViewModel class for the dialog, which is simple enough. However, the dialog also hosts an additional control (chosen by a ContentTemplateSelector), which varies depending on the particular type of Controller that's being connected. This control has its own ViewModel. The issue I'm encountering is that, when I close the dialog by pressing OK, I need to actually create the requested connection, which requires information captured in the inner Controller-specific ViewModel class. It's tempting to simply have all of the Controller-specific ViewModel classes implement a common interface that constructs the connection, but should the inner ViewModel really be in charge of this construction? My general question is: are there are any generally-accepted design patterns for how ViewModels should interact with eachother, particularly when a 'parent' VM needs help from a 'child' VM in order to know what to do?

    Read the article

  • Nested SQL Select statement fails on SQL Server 2000, ok on SQL Server 2005

    - by Jay
    Here is the query: INSERT INTO @TempTable SELECT UserID, Name, Address1 = (SELECT TOP 1 [Address] FROM (SELECT TOP 1 [Address] FROM [UserAddress] ua INNER JOIN UserAddressOrder uo ON ua.UserID = uo.UserID WHERE ua.UserID = u.UserID ORDER BY uo.AddressOrder ASC) q ORDER BY AddressOrder DESC), Address2 = (SELECT TOP 1 [Address] FROM (SELECT TOP 2 [Address] FROM [UserAddress] ua INNER JOIN UserAddressOrder uo ON ua.UserID = uo.UserID WHERE ua.UserID = u.UserID ORDER BY uo.AddressOrder ASC) q ORDER BY AddressOrder DESC) FROM User u In this scenario, users have multiple address definitions, with an integer field specifying the preferred order. "Address2" (the second preferred address) attempts to take the top two preferred addresses, order them descending, then take the top one from the result. You might say, just use a subquery which does a SELECT for the record with "2" in the Order field, but the Order values are not contiguous. How can this be rewritten to conform to SQL 2000's limitations? Very much appreciated.

    Read the article

  • RIA Services Filter descriptor

    - by Mohit
    I have a Filterdescriptor as shown below. The propertypath is of type 'char?' I get following InvalidOperationException when I filter by entering a value Y InnerException {System.InvalidOperationException: A FilterDescriptor with its PropertyPath equal to 'Valid' cannot be evaluated. --- System.ArgumentException: Operator 'StartsWith' incompatible with operand types 'Char?' and 'Char?' --- System.ArgumentNullException: Value cannot be null. Parameter name: method at System.Linq.Expressions.Expression.ValidateCallArgs(Expression instance, MethodInfo method, ReadOnlyCollection1& arguments) at System.Linq.Expressions.Expression.Call(Expression instance, MethodInfo method, IEnumerable1 arguments) at System.Linq.Expressions.Expression.Call(Expression instance, MethodInfo method, Expression[] arguments) at System.Windows.Controls.LinqHelper.GenerateMethodCall(String methodName, Expression left, Expression right) at System.Windows.Controls.LinqHelper.GenerateStartsWith(Expression left, Expression right) at System.Windows.Controls.LinqHelper.BuildFilterExpression(Expression propertyExpression, FilterOperator filterOperator, Expression valueExpression, Boolean isCaseSensitive, Expression& filterExpression) --- End of inner exception stack trace --- --- End of inner exception stack trace ---} System.Exception {System.InvalidOperationException}

    Read the article

  • .Net Intermittent System.Web.Services.Protocols.SoapHeaderException

    - by ScottE
    We have a .net 3.5 web app that consumes third party web services. The proxy was created by adding a web reference to their wsdl. This proxy is not compiled. Our error logging is picking up frequent but intermittent exceptions: An exception of type 'System.Web.Services.Protocols.SoapHeaderException' occurred and was caught If I follow the url to the page that generated the exception, I can't recreate it. Edit: Here is most of the exception - where it bubbled up from Message : Internal Error Type : System.Web.Services.Protocols.SoapHeaderException, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a Source : System.Web.Services Help link : Actor : Code : http://schemas.xmlsoap.org/soap/envelope/:Client Detail : Lang : Node : Role : SubCode : Data : System.Collections.ListDictionaryInternal TargetSite : System.Object[] ReadResponse(System.Web.Services.Protocols.SoapClientMessage, System.Net.WebResponse, System.IO.Stream, Boolean) Stack Trace : at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Vendor.getSearch(getSearchRequest getSearchRequest) in c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\be43c34e\b09edc7e\App_WebReferences.pww-cf-q.0.cs:line 73 Edit 2: Inner exceptions: I sometimes get the following inner exceptions logged: Message : Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. Type : System.IO.IOException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Source : System Help link : Data : System.Collections.ListDictionaryInternal TargetSite : Int32 Read(Byte[], Int32, Int32) Stack Trace : at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Net.TlsStream.CallProcessAuthentication(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) And/Or: Message : An existing connection was forcibly closed by the remote host Type : System.Net.Sockets.SocketException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Source : System Help link : ErrorCode : 10054 SocketErrorCode : ConnectionReset NativeErrorCode : 10054 Data : System.Collections.ListDictionaryInternal TargetSite : Int32 Receive(Byte[], Int32, Int32, System.Net.Sockets.SocketFlags) Stack Trace : at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) Update We're still working on it. Originally there was a route issue, which was resolved. We're still getting the inner exception with socket errors. We had MS support involved today, and they looked at some traces and network captures. The web service host does round-robin DNS, and they may be responding on a different IP address for the syn syn/ack from one ip, and the next from a different ip. This is not good. This is likely quite specific to our situation, but perhaps it applies to others as well. Microsoft Network Monitor and an application trace got us the information we needed.

    Read the article

  • onload script does not work in subview page in JSF

    - by jackrobert
    Hi, Here i write two jsp page like outerPage.jsp and innerPage.jsp The outer page include innerPage.jsp The inner page have one textfield and one button.. I need focus for textFiled while page loading(innerPage.jsp).. I write a javascript, but not work it... The code is outerPage.jsp <%@page contentType="text/html" pageEncoding="UTF-8"% <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" % <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" % <%@ taglib uri="http://richfaces.org/a4j" prefix="a4j" % <%@ taglib uri="http://richfaces.org/rich" prefix="rich"% <f:view> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Outer Viewer</title> <meta name="description" content="Outer Viewer" /> </head> <body id="outerMainBody"> <rich:page id="richPage"> <rich:layout> <rich:layoutPanel position="center" width="100*"> <a4j:outputPanel> <f:verbatim><table style="padding: 5px;"><tbody><tr> <td> <jsp:include page="innerPage.jsp" flush="true"/> </td> </tr></tbody></table></f:verbatim> </a4j:outputPanel> </rich:layoutPanel> </rich:layout> </rich:page> </body> </f:view> innerPage.jsp <%@page contentType="text/html" pageEncoding="UTF-8"% <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" % <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" % <%@ taglib uri="http://richfaces.org/a4j" prefix="a4j" % <%@ taglib uri="http://richfaces.org/rich" prefix="rich"% <f:subview id="innerViewerSubviewId"> <f:verbatim><head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title>Inner Viewer </title> <script type="text/javascript"> //This script does not called during the page loading (onload) function cursorFocus() { alert("Cursor Focuse Method called..."); document.getElementById("innerViewerForm:innerNameField").focus(); alert("Cursor Focuse method end!!!"); } </script> </head> <body onload="cursorFocus();"></f:verbatim> <h:form id="innerViewerForm"> <rich:panel id="innerViewerRichPanel"> <f:facet name="header"> <h:outputText value="Inner Viewer" /> </f:facet> <a4j:outputPanel id="innerViewerOutputPanel" > <h:panelGrid id="innerViewerSearchGrid" columns="2" cellpadding="3" cellspacing="3"> //<%-- Row 1 For Text Field --%> <h:outputText value="inner Name : " /> <h:inputText id="innerNameField" value=""/> //<%-- Row 2 For Test Button --%> <h:outputText value="" /> <h:commandButton value="TestButton" action="test" /> </h:panelGrid> </a4j:outputPanel> </rich:panel> </h:form> <f:verbatim></body></f:verbatim> </f:subview> <f:verbatim></html></f:verbatim> The cursorFocus script does not called... Here i need cursor focus for textFiled after display the page ... Thanks in advance.

    Read the article

  • What is syncobj in SQL Server

    - by hgulyan
    Hi. I run this script to search particular text in sys.columns and I get a lot of "dbo.syncobj_0x3934443438443332" this kind of result. SELECT c.name, s.name + '.' + o.name FROM sys.columns c INNER JOIN sys.objects o ON c.object_id=o.object_id INNER JOIN sys.schemas s ON o.schema_id=s.schema_id WHERE c.name LIKE '%text%' If I get it right, they are replication objects. Is it so? Can i just throw them away from my query just like o.name NOT LIKE '%syncobj%' or there's another way? Thank you.

    Read the article

  • In NHibernate, how do I combine two DetachedCriteria instances

    - by Trevor
    My scenario is this: I have a base NHibernate query to run of the form (I've coded it using DetachedCriteria , but describe it here using SQL syntax): SELECT * FROM Items I INNER JOIN SubItems S on S.FK = I.Key The user interface to show the results of this join allows the user to specify additional criteria: Say: I.SomeField = 'UserValue'. Now, I need the final load command to be: SELECT * FROM Items I INNER JOIN SubItems S on S.FK = I.Key WHERE I.SomeField = 'UserValue' My problem is: I've created a DetachedCriteria with the 'static' aspect of the query (the top join) and the UI creates a DetachedCriteria with the 'dynamic' component of the query. I need to combine the two into a final query that I can execute on the NHibernate session. DefaultCriteria.Add() takes an ICriterion (which are created using the Expression class, and maybe other classes I don't know of which could be the solution to my problem). Does anyone know how I might do what I want?

    Read the article

  • Drupal Views Duplicate values being returned when using a relationship

    - by Linda
    I am having a problem with views. I have a view and am passing it a taxonomy term by name to it. I then have a relationship to a related node. For my output fields I am returning the related Title and related Body. I however have duplicates in my results. I have turned distinct to yes but believe this is working on the nodes being return and not the related node. Any ideas how I can remove the duplicates? Update Below is the query being run when I only get the title SELECT DISTINCT(node.nid) AS nid, node_node_data_field_wine_company.title AS node_node_data_field_wine_company_title, node_node_data_field_wine_company.nid AS node_node_data_field_wine_company_nid FROM node node LEFT JOIN content_type_wine node_data_field_wine_company ON node.vid = node_data_field_wine_company.vid INNER JOIN node node_node_data_field_wine_company ON node_data_field_wine_company.field_wine_company_nid = node_node_data_field_wine_company.nid LEFT JOIN term_node term_node ON node.vid = term_node.vid INNER JOIN term_data term_data ON term_node.tid = term_data.tid WHERE term_data.name = 'test' GROUP BY nid It looks like I should be grouping by node_node_data_field_wine_company_nid or selecting distinct values from there. Any ideas?

    Read the article

  • SQL : where vs. on in join

    - by Erwin
    Perhaps a dumb question, but consider these 2 tables : T1 Store Year 01 2009 02 2009 03 2009 01 2010 02 2010 03 2010 T2 Store 02 Why is this INNER JOIN giving me the results I want (filtering the [year] in the ON clause) : select t1.* from t1 inner join t2 on t1.store = t2.store and t1.[year] = '2009' Store Year 02 2009 And why the LEFT OUTER JOIN include records of year 2010 ? select t1.* from t1 left outer join t2 on t1.store = t2.store and t1.year = '2009' where t2.store is null 01 2009 03 2009 01 2010 02 2010 03 2010 And I have to write the [year] filter in the 'WHERE' clause : select t1.* from t1 left outer join t2 on t1.store = t2.store where t2.store is null and t1.year = '2009' 01 2009 03 2009 Like I said, perhaps a dumb question, but it's bugging me !

    Read the article

  • Co-Authors Wordpress Plugin: coauthors_wp_list_authors function not working correctly

    - by rayne
    The Co-Authors Plus Plugin for Wordpress has a very annoying bug. The custom function coauthors_wp_list_authors lists authors the same way the wordpress function wp_list_authors does, but it does not include authors in the list who don't have a post of their own - if they have only entries in which they are listed as co-author but not as author, they will not be included in the list. That is of course missing a very important point. I've looked at the faulty SQL statement, but unfortunately my knowledge of advanced SQL, especially when it comes to JOINs, as well as my knowledge of the wp database structure is too limited and I remain clueless. There is a topic in the WP support forum, but unfortunately the information there is very outdated and the fix is not applicable anymore. I couldn't find any other, more current solutions on the internet. I'd be glad if somewhere here could help fix the SQL statement so it also lists co-authors who don't have posts where they're the sole author, as well as display the correct post count for all authors. Here's the entire function for reference purposes with a comment marking the SQL statement: function coauthors_wp_list_authors($args = '') { global $wpdb, $coauthors_plus; $defaults = array( 'optioncount' => false, 'exclude_admin' => true, 'show_fullname' => false, 'hide_empty' => true, 'feed' => '', 'feed_image' => '', 'feed_type' => '', 'echo' => true, 'style' => 'list', 'html' => true ); $r = wp_parse_args( $args, $defaults ); extract($r, EXTR_SKIP); $return = ''; $authors = $wpdb->get_results("SELECT ID, user_nicename from $wpdb->users " . ($exclude_admin ? "WHERE user_login <> 'admin' " : '') . "ORDER BY display_name"); $author_count = array(); # this is the SQL statement which doesn't work correctly: $query = "SELECT DISTINCT $wpdb->users.ID AS post_author, $wpdb->terms.name AS user_name, $wpdb->term_taxonomy.count AS count"; $query .= " FROM $wpdb->posts"; $query .= " INNER JOIN $wpdb->term_relationships ON ($wpdb->posts.ID = $wpdb->term_relationships.object_id)"; $query .= " INNER JOIN $wpdb->term_taxonomy ON ($wpdb->term_relationships.term_taxonomy_id = $wpdb->term_taxonomy.term_taxonomy_id)"; $query .= " INNER JOIN $wpdb->terms ON ($wpdb->term_taxonomy.term_id = $wpdb->terms.term_id)"; $query .= " INNER JOIN $wpdb->users ON ($wpdb->terms.name = $wpdb->users.user_login)"; $query .= " WHERE post_type = 'post' AND " . get_private_posts_cap_sql( 'post' ); $query .= " AND $wpdb->term_taxonomy.taxonomy = '$coauthors_plus->coauthor_taxonomy'"; $query .= " GROUP BY post_author"; foreach ((array) $wpdb->get_results($query) as $row) { $author_count[$row->post_author] = $row->count; } foreach ( (array) $authors as $author ) { $link = ''; $author = get_userdata( $author->ID ); $posts = (isset($author_count[$author->ID])) ? $author_count[$author->ID] : 0; $name = $author->display_name; if ( $show_fullname && ($author->first_name != '' && $author->last_name != '') ) $name = "$author->first_name $author->last_name"; if( !$html ) { if ( $posts == 0 ) { if ( ! $hide_empty ) $return .= $name . ', '; } else $return .= $name . ', '; continue; } if ( !($posts == 0 && $hide_empty) && 'list' == $style ) $return .= '<li>'; if ( $posts == 0 ) { if ( ! $hide_empty ) $link = $name; } else { $link = '<a href="' . get_author_posts_url($author->ID, $author->user_nicename) . '" title="' . esc_attr( sprintf(__("Posts by %s", 'co-authors-plus'), $author->display_name) ) . '">' . $name . '</a>'; if ( (! empty($feed_image)) || (! empty($feed)) ) { $link .= ' '; if (empty($feed_image)) $link .= '('; $link .= '<a href="' . get_author_feed_link($author->ID) . '"'; if ( !empty($feed) ) { $title = ' title="' . esc_attr($feed) . '"'; $alt = ' alt="' . esc_attr($feed) . '"'; $name = $feed; $link .= $title; } $link .= '>'; if ( !empty($feed_image) ) $link .= "<img src=\"" . esc_url($feed_image) . "\" style=\"border: none;\"$alt$title" . ' />'; else $link .= $name; $link .= '</a>'; if ( empty($feed_image) ) $link .= ')'; } if ( $optioncount ) $link .= ' ('. $posts . ')'; } if ( !($posts == 0 && $hide_empty) && 'list' == $style ) $return .= $link . '</li>'; else if ( ! $hide_empty ) $return .= $link . ', '; } $return = trim($return, ', '); if ( ! $echo ) return $return; echo $return; }

    Read the article

  • SQL Server 2008 ContainsTable, CTE, and Paging

    - by David Murdoch
    I'd like to perform efficient paging using containstable. The following query selects the top 10 ranked results from my database using containstable when searching for a name (first or last) that begins with "Joh". DECLARE @Limit int; SET @Limit = 10; SELECT TOP @Limit c.ChildID, c.PersonID, c.DOB, c.Gender FROM [Person].[vFullName] AS v INNER JOIN CONTAINSTABLE( [Person].[vFullName], (FullName), IS ABOUT ( "Joh*" WEIGHT (.4), "Joh" WEIGHT (.6)) ) AS k3 ON v.PersonID = k3.[KEY] JOIN [Child].[Details] c ON c.PersonID = v.PersonID JOIN [Person].[Details] p ON p.PersonID = c.PersonID ORDER BY k3.RANK DESC, FullName ASC, p.Active DESC, c.ChildID ASC I'd like to combine it with the following CTE which returns the 10th-20th results ordered by ChildID (the primary key): DECLARE @Start int; DECLARE @Limit int; SET @Start = 10; SET @Limit = 10; WITH ChildEntities AS ( SELECT ROW_NUMBER() OVER (ORDER BY ChildID) AS Row, ChildID FROM Child.Details ) SELECT c.ChildID, c.PersonID, c.DOB, c.Gender FROM ChildEntities cte INNER JOIN Child.Details c ON cte.ChildID = c.ChildID WHERE cte.Row BETWEEN @Start+1 AND @Start+@Limit ORDER BY cte.Row ASC

    Read the article

  • FTP OVER SSL - Invalid Token Error

    - by crazsmith
    I am trying to implement FTP over SSL to upload encrypted files. I've created a SSL certificate and send it to the vendor. But I couldn't make a FTPS connection to the server. When connecting via FTPS, I'm authenticating using my private key file. I have tried .NET FTPWebRequest, SmartFTp,CuteFTP Pro. I am getting the following error:- A call to SSPI failed. See inner exception. The inner exception is "The token supplied to the function is invalid" FtpWebRequest request = (FtpWebRequest)FtpWebRequest.Create("ftp://RemoteHost.Com"); request.Credentials = new NetworkCredential("UserName", "Password"); request.KeepAlive = false; request.EnableSsl = true; X509Certificate2 cert2 = new X509Certificate2("PrivateKeyFile.pfx", "password"); request.ClientCertificates.Add(cert2); FtpWebResponse response = (FtpWebResponse)request.GetResponse(); Any Help Appreciated. Thanks.

    Read the article

  • How to only round selected corners in a fancytitle box with Tikz

    - by Christian Jonassen
    If you take a look at http://www.texample.net/tikz/examples/boxes-with-text-and-math/ the boxes there are with rounded corners. In the examples, both the box itself and the title is a box. I want the title box to not have the bottom corners rounded. On page 120 in the manual, there is a description of how to draw with and without rounded corners. However, I want to use this in a fancytitle. It looks a bit silly to have the fancytitle as a box where all corners are rounded when it is as wide as the box itself. \begin{tikzpicture}[baseline=-2cm] \node [mybox] (box){ \begin{minipage}[t!]{0.50\textwidth} Help, I'm a box \end{minipage} }; \node[fancytitle, text width=0.5423\textwidth, text centered, rounded corners] at (box.north) {Help, I'm a title}; \end{tikzpicture} The style I use is this \tikzstyle{mybox} = [draw=red, fill=blue!20, very thick, rectangle, rounded corners, inner sep=10pt, inner ysep=20pt] \tikzstyle{fancytitle} = [fill=red, text=white]

    Read the article

  • Constructing dynamic columns from parameters in Sybase

    - by Chapax
    Hi, I'm trying to write a stored proc (SP) in Sybase. The SP takes 5 varchar parameters. Based on the parameters passed, I want to construct the column names to be selected from a particular table. The below works: DECLARE @TEST VARCHAR(50) SELECT @TEST = "country" --print @TEST execute("SELECT DISTINCT id_country AS id_level, Country AS nm_level FROM tempdb..tbl_books INNER JOIN (tbl_ch2_bespoke_report INNER JOIN tbl_ch2_bespoke_rpt_mapping ON tbl_ch2_bespoke_report.id_report = tbl_ch2_bespoke_rpt_mapping.id_report) ON id_" + @TEST + "= tbl_ch2_bespoke_rpt_mapping.id_pnl_level WHERE tbl_ch2_bespoke_report.id_report = 14") but gives me multiple results: 1 1 row(s) affected. id_level nm_level 1 4376 XYZ 2 4340 ABC I would like to however only obtain the 2nd result. Do I need to necessarily use dynamic SQL to achieve this? Many thanks for your help. --Chapax

    Read the article

  • Scala: How to combine parser combinators from different objects

    - by eed3si9n
    Given a family of objects that implement parser combinators, how do I combine the parsers? Since Parsers.Parser is an inner class, and in Scala inner classes are bound to the outer object, the story becomes slightly complicated. Here's an example that attempts to combine two parsers from different objects. import scala.util.parsing.combinator._ class BinaryParser extends JavaTokenParsers { def anyrep: Parser[Any] = rep(any) def any: Parser[Any] = zero | one def zero: Parser[Any] = "0" def one: Parser[Any] = "1" } object LongChainParser extends BinaryParser { def parser1: Parser[Any] = zero~zero~one~one } object ShortChainParser extends BinaryParser { def parser2: Parser[Any] = zero~zero } object ExampleParser extends BinaryParser { def parser: Parser[Any] = (LongChainParser.parser1 ||| ShortChainParser.parser2) ~ anyrep def main(args: Array[String]) { println(parseAll(parser, args(0) )) } } This results to the following error: <console>:11: error: type mismatch; found : ShortChainParser.Parser[Any] required: LongChainParser.Parser[?] def parser: Parser[Any] = (LongChainParser.parser1 ||| ShortChainParser.parser2) ~ anyrep I've found the solution to this problem already, but since it was brought up recently on scala-user ML (Problem injecting one parser into another), it's probably worth putting it here too.

    Read the article

  • Query for props list with or without values

    - by vitto
    Hi, I'm trying to make a SELECT on three relational tables like these ones: table_materials -> material_id - material_name table_props -> prop_id - prop_name table_materials_props - row_id -> material_id -> prop_id - prop_value On my page, I'd like to get a result like this one but i have some problem with the query: material prop A prop B prop C prop D prop E wood 350 NULL NULL 84 16 iron NULL 17 NULL NULL 201 copper 548 285 99 NULL NULL so the query should return something like: material prop_name prop_value wood prop A 350 wood prop B NULL wood prop C NULL wood prop D 84 wood prop E 16 // and go on with others rows i thought to use something like: SELECT * FROM table_materials AS m INNER JOIN table_materials_props AS mp ON m.material_id = mp.material_id INNER JOIN table_materials_props AS p ON mp.prop_id = p.prop_id ORDER BY p.prop_name the problem is the query doesn't return the NULL values, and I need the same prop order for all the materials regardless of prop values are NULL or not I hope this example is clear!

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >