Search Results

Search found 32568 results on 1303 pages for 'linux pwns mac'.

Page 26/1303 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Mac Management and Security

    - by Bart Silverstrim
    I was going through some literature on managing OS X laptops and asked someone some questions about usage scenarios when using the MacBooks. I asked someone more knowledgeable than I about whether it was possible for my Mac to be taken over if I were visiting another site for a conference or if I went on a wifi network at a local coffee house with policies from an OS X Server with workgroup manager (either legit for the site or someone running a version of OS X Server on hardware they have hidden somewhere on the network), which apparently could be set up to do things like limit my access to Finder or impose other neat whiz-bang management features. He said that it is indeed possible for it to happen as it would be assigned via the DHCP server and the OS X server would assume my Mac is a guest and could hand out restrictions and apparently my Mac will happily accept them without notifying me or giving me an option, unlike Windows which I believe would need to be joined to a domain before it becomes "managed" by Active Directory. So my question is as network admins and sysadmins with users traveling with MacBooks, is there a way to reasonably protect your users from having their machines hijacked without resorting to just turning off networking all the time? Or isn't this much of a security hazard? What threat does this pose to the road warriors in your businesses?

    Read the article

  • Mac Management Without Permission and Security

    - by Bart Silverstrim
    I was going through some literature on managing OS X laptops and asked someone some questions about usage scenarios when using the MacBooks. I asked someone more knowledgeable than I about whether it was possible for my Mac to be taken over if I were visiting another site for a conference or if I went on a wifi network at a local coffee house with policies from an OS X Server with workgroup manager (either legit for the site or someone running a version of OS X Server on hardware they have hidden somewhere on the network), which apparently could be set up to do things like limit my access to Finder or impose other neat whiz-bang management features. He said that it is indeed possible for it to happen as it would be assigned via the DHCP server and the OS X server would assume my Mac is a guest and could hand out restrictions and apparently my Mac will happily accept them without notifying me or giving me an option, unlike Windows which I believe would need to be joined to a domain before it becomes "managed" by Active Directory. So my question is as network admins and sysadmins with users traveling with MacBooks, is there a way to reasonably protect your users from having their machines hijacked without resorting to just turning off networking all the time? Or isn't this much of a security hazard? What threat does this pose to the road warriors in your businesses?

    Read the article

  • Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

    - by Starchy
    I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

    Read the article

  • I can't connect new Windows 7 PC to Mac iBook with OS 10.3.9

    - by Jeff Humm
    Help ! I have an old iBook wired to a router and a new PC linking wirelessly to same router. On the Mac I have 'seen' the PC but not been able to connect to it. On the PC, the Network and Sharing Centre lists 'IBOOK'. When I click on this, 'Windows Security' asks me to 'Enter Network Password', asking for User name and password. I have tried: 1) The user name and password of my admin account on the iBook. This returns a 'logon failure' message but lists the user name as [NAME_OF_PC\User Name], suggesting it was looking for the user name of the PC, not the Mac. 2) The user name and password of my account on the PC. This also returns a 'logon failure' message. 3) The user name of my account on the PC and the 'homegroup password' given to me by Windows when setting up the PC. This also returns a 'logon failure' message. Today I've tried connecting the two machines via a patch cable - still no joy. Can anyone help? It is 20 years since I wrestled with any OS other than Mac, and 10 years since I've done mich wrangling with the Macs, so please assume no knowledge! Thanks in advance,

    Read the article

  • Format & Fresh Install Mac os x snow leopard in mac mini.

    - by sagar
    Hello Every one. I have purchased dvd of Snow leopard 10.6.2. But actually I purchased mac mini with 10.5.7 leopard I tried to install snow leopard 10.6.2. Everything went perfectly. system was installed successfully. But the problem that I faced is as follows. System was installed but my older data remained as it is. ( means installation didn't format every thing - means installation was done on upgrade basis. ) Now, my system works with very low speed. Previous performance of mac mini was double as compare to current upgrade version. Now - my question are as follows. Does upgrade installation causes the performance in specially osx ? ( means anyone faced this kind of problem ? ) Or 10.6.2 snow leopard is heavy weight system for mac mini ? ( 2Ghz Intel core2duo,1GB RAM - is this configuration OK for snow leopard 10.6.2 ? ) Fresh install works better then upgrade in os x ?

    Read the article

  • Host spreads wrong MAC Adress of router on the WIFI

    - by JavaIsMyIsland
    Strange things are going on our network. Since yesterday a host which is actually not on our subnet spreads wrong ARP Replys on our network. To be precise, only on the WIFI. If I connect my Laptop to the cable ethernet, it gets the right MAC adress of the router. Also my Android phone and my Ubuntu system do get the right MAC Adress. So I took a look at wireshark. When I clear the ARP cache of the windows machine, the first ARP response is correct and comes from the router. But like 10 ms later another ARP response comes from another host in the WIFI. The host changes its IP Adresses from time to time and they look like they are not on our subnet. So I can not use the internet because DNS is not working anymore. Sometimes the router wins the race condition and the mac adress is set correctly in the arp cache. I first thought, this is an arp-poisoning mitm attack but it does not make sense if the packets get not routed correctly?! I restarted the router but it didn't help. I have no access to the router, else I would change the shared key to make sure there is no intruder on the wifi.

    Read the article

  • yum update works but yum --security update fails to work in Fedora 12

    - by bobo
    I had already installed the yum-security before. And I was going to do an update by entering the following command: [root@localhost /]# yum update Loaded plugins: presto, priorities, refresh-packagekit, security Skipping security plugin, no data Setting up Update Process Resolving Dependencies Skipping security plugin, no data --> Running transaction check ---> Package eject.i686 0:2.1.5-17.fc12 set to be updated ---> Package glibc.i686 0:2.11.1-4 set to be updated ---> Package glibc-common.i686 0:2.11.1-4 set to be updated ---> Package glibc-devel.i686 0:2.11.1-4 set to be updated ---> Package glibc-headers.i686 0:2.11.1-4 set to be updated ---> Package gnome-themes.noarch 0:2.28.1-3.fc12 set to be updated ---> Package gtk2.i686 0:2.18.9-3.fc12 set to be updated ---> Package gtk2-immodule-xim.i686 0:2.18.9-3.fc12 set to be updated ---> Package kernel-PAE.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-PAE-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-PAEdebug-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-debug-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-firmware.noarch 0:2.6.32.11-99.fc12 set to be updated ---> Package kernel-headers.i686 0:2.6.32.11-99.fc12 set to be updated ---> Package libnetfilter_conntrack.i686 0:0.0.101-1.fc12 set to be updated ---> Package media-player-info.noarch 0:5-1.fc12 set to be updated ---> Package nscd.i686 0:2.11.1-4 set to be updated ---> Package perf.noarch 0:2.6.32.11-99.fc12 set to be updated ---> Package rhythmbox.i686 0:0.12.6-5.fc12 set to be updated ---> Package sysvinit-tools.i686 0:2.87-3.dsf.fc12 set to be updated --> Finished Dependency Resolution --> Running transaction check ---> Package kernel-PAE.i686 0:2.6.31.12-174.2.3.fc12 set to be erased --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: kernel-PAE i686 2.6.32.11-99.fc12 updates 20 M kernel-PAE-devel i686 2.6.32.11-99.fc12 updates 6.2 M kernel-PAEdebug-devel i686 2.6.32.11-99.fc12 updates 6.2 M kernel-debug-devel i686 2.6.32.11-99.fc12 updates 6.2 M kernel-devel i686 2.6.32.11-99.fc12 updates 6.1 M Updating: eject i686 2.1.5-17.fc12 updates 49 k glibc i686 2.11.1-4 updates 4.2 M glibc-common i686 2.11.1-4 updates 14 M glibc-devel i686 2.11.1-4 updates 953 k glibc-headers i686 2.11.1-4 updates 590 k gnome-themes noarch 2.28.1-3.fc12 updates 1.5 M gtk2 i686 2.18.9-3.fc12 updates 3.2 M gtk2-immodule-xim i686 2.18.9-3.fc12 updates 60 k kernel-firmware noarch 2.6.32.11-99.fc12 updates 968 k kernel-headers i686 2.6.32.11-99.fc12 updates 749 k libnetfilter_conntrack i686 0.0.101-1.fc12 updates 37 k media-player-info noarch 5-1.fc12 updates 32 k nscd i686 2.11.1-4 updates 189 k perf noarch 2.6.32.11-99.fc12 updates 79 k rhythmbox i686 0.12.6-5.fc12 updates 4.0 M sysvinit-tools i686 2.87-3.dsf.fc12 updates 58 k Removing: kernel-PAE i686 2.6.31.12-174.2.3.fc12 @updates 72 M Transaction Summary ================================================================================ Install 5 Package(s) Upgrade 16 Package(s) Remove 1 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) Total download size: 75 M Is this ok [y/N]: But then I changed my mind, I decided to do a security-only update instead of a full update, so I entered the following command: [root@localhost /]# yum --security update Loaded plugins: presto, priorities, refresh-packagekit, security Setting up Update Process Resolving Dependencies Limiting packages to security relevant ones http://download.fedoraproject.org/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.cuhk.edu.hk/pub/linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.cuhk.edu.hk/pub/linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.cuhk.edu.hk/pub/linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.riken.jp/Linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.riken.jp/Linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirror.cse.iitk.ac.in/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirror.cse.iitk.ac.in/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirrors.isu.net.sa/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirrors.isu.net.sa/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. ftp://ftp.chu.edu.tw/linux/Fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno -1] Metadata file does not match checksum Trying other mirror. http://mirror.yandex.ru/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirror.yandex.ru/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://linus.iyte.edu.tr/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://linus.iyte.edu.tr/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.jaist.ac.jp/pub/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.jaist.ac.jp/pub/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.kddilabs.jp/Linux/packages/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://srv2.ftp.ne.jp/Linux/packages/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://www.ftp.ne.jp/Linux/distributions/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://srv2.ftp.ne.jp/Linux/distributions/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.rhd.ru/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.rhd.ru/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirrors.163.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirrors.163.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirror.nus.edu.sg/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirror.nus.edu.sg/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.yz.yamagata-u.ac.jp/pub/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.yz.yamagata-u.ac.jp/pub/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.linux.org.tr/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.linux.org.tr/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirrors.cytanet.com.cy/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirrors.cytanet.com.cy/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://fedoramirror.hnsdc.com/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://fedoramirror.hnsdc.com/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.twaren.net/Linux/Fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://c147.twaren.net/pub/Linux/Fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.mirror.tw/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.mirror.tw/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.cs.pu.edu.tw/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.cs.pu.edu.tw/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ubuntu.cn99.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ubuntu.cn99.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. Error: failure: repodata/updateinfo.xml.gz from updates: [Errno 256] No more mirrors to try. You could try using --skip-broken to work around the problem ^C[root@localhost /]# As it can be seen in the output, when I run the yum --security update command, it did show the Limiting packages to security relevant ones message so it's aware of the option. But I don't know why it keeps reporting the http error 416. I searched in google and found the following description of the error but it doesn't seem to help much. HTTP ERROR 416 - Requested Range Not Satisfiable A 416 status code indicates that the server was unable to fulfill the request. This may be, for example, because the client asked for the 800th-900th bytes of a document, but the document was only 200 bytes long. It suggests me to use the --skip-broken option, I tried and the output is the same. I already tested many times, it just doesn't work when the --security option is used. What could be the possible cause for this problem?

    Read the article

  • Using 1920x1200 mode on SyncMaster T260HD in Linux

    - by dagorym
    I just got a Samsung SyncMaster T260HD monitor. It works straight out of the box with Windows but I can't seem to get it to work with Linux, which is my primary OS for day to day work. The computer boots up but when going into graphical mode on Linux the monitor gives me a "Mode not supported" error and doesn't display anything. I booted up windows and, using PowerStrip, grabbed the exact ModeLine that should be used to get the equivalent setting in Linux and added it to my xorg config file but it doesn't seem to help. the ModeLine is: ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync This is the modeline for the working display settings in windows but it doesn't seem to work in Linux My complete entry in the xorg.conf file for the monitor is Section "Monitor" Identifier "Monitor0" ModelName "SyncMaster" DisplaySize 518 324 HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "dpms" ModeLine "1920x1200" 153.9 1920 1984 2016 2080 1200 1203 1209 1235 +hsync -vsync EndSection I'm running Scientific Linux 5.4 (clone of Redhat Enterprise Linux 5.4) but I've tried booting with a recent Linux Mint Distro as well as Ubuntu 9.04 and had the same problem. Any suggestions on other things I should try or might be missing? If anyone's gotten this to work I'd love to know. Thanks.

    Read the article

  • LogMeIn Hamachi for Linux

    - by tlunter
    So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

    Read the article

  • Browsing Pictures on a Mac

    - by Mr Woody
    Hi. After many years using linux, I decided to buy a mac. Now my main problem is: how do I synchronize pictures within my linux machines and the mac? I have been using digikam in linux, and I like it because I can just browse the pictures directly from my directories (and it is easy for me to keep directories synchronized within mac and linux). I have been testing iphoto and aperture, which are quite nice but if use them, my understanding is that I have to import all the pictures into these softwares, and this doesn't seem to be the ideal solution for me. I tried picasa, but I don't find it as good as iphoto and aperture. On the other hand it allows me to browse directories, without having two copies of the same pictures. I didn't try lightroom yet, would that be a good solution? I would appreciate any suggestion on this. Thanks!

    Read the article

  • Linux Mint Constantly freezing on Dell XPS L502X

    - by Josh
    I recently partitioned my hard drive to dual boot the existing Windows 7 with Linux Mint because I am tired of using Windows, especially the lack of terminal. I want to eventually remove Windows 7 and just run it from a VM within Linux Mint, but I want to make sure that I like the Mint before going all in. I ran Linux Mint on a VM inside Windows for a while, enjoyed it, and never had any issues with it. Since installing on my hard drive it has started freezing every 5-10 minutes, and the only way to get it back is to either power down, or close the lid and reopen once it sleeps. I've also tried running Ubuntu on dual boot in the past, and while it never froze, the battery life was terrible, and the fan was constantly running. I'm experiencing the same battery/fan problem with Mint, which doesn't make sense to me, as Linux should be lighter on the CPU than windows. If I had to guess I'd say it's probably a driver thing, with my video card or fan or something. My battery life in Windows is ~2 hours and its about 40 minutes in Linux. At this point, that is even if my laptop doesn't freeze before then. On a less important note, I also have an intel Centrino 6150 WiMax card that I'd like to be able to use, but that won't register on the Linux system either. I have tried downloading drivers for both of these, but neither have solved my problems. I'm definitely getting frustrated and am getting close to giving up on Linux even though I dread working on a Windows machine.

    Read the article

  • Methods to transfer files from Windows server to linux server

    - by Raze2dust
    Hi, I need to transfer webserver-log-like-files containing periodically from windows production servers in the US to linux servers here in India. The files are ~4 MB in size each and I get about 1 file per minute. I can take about 5 mins lag between the files getting written in windows and them being available in the linux machines. I am a bit confused between the various options here as I am quite inexperienced in such design: I am thinking of writing a service in C#.NET which will periodically archive, compress and send them over to the linux machines. These files are pretty compressible. WinRAR can convert 32 MB of these files into a 1.2 MB archive. So that should solve the network transfer speed issue. But then how exactly do I transfer files to linux? I could mount linux drive on windows server using samba, or should I create an ftp server, or send the file serialized as a POST request. Which one would be good? Also, I have to minimize the load on the windows server. Mount the windows drive on linux instead. I could use the mount command or I could use samba here (What are the pros and cons of these two?). I can then write the compressing and copying part in linux itself. I don't trust the internet connection to be very stable, so there should be a good retry mechanism and failure protection too. What are the potential gotchas in these situations, and other points that I must be worried about? Thanks, Hari

    Read the article

  • Mac/Linux Dual Boot

    - by user38008
    I trying to create a dual boot of linux and mac without bootcamp. But I'm nervous that I'll screw up or lose my data. In disk utilitys I made a 45gig partion called linux but I dont know how to format it and if it matters at all.... Also, when the partition is done. I press cntrl when booting up select that Linux partition and put in the livebootUSB or CD right?

    Read the article

  • Android: How to obtain Mac Address of WiFi Network Interface?

    - by Gubatron
    It seems the java.net.NetworkInterface implementation of android does not have a byte[] getHardwareAddress() method http://developer.android.com/reference/java/net/NetworkInterface.html I've found several forums of people trying to do this with no definitive answer, I need to get a somewhat cross-device UUID, so I can't rely on phone numbers or in ANDROID_ID (which can be overwritten and which I think depends on the user having a google account) http://developer.android.com/reference/android/provider/Settings.Secure.html#ANDROID_ID In linux you can use ifconfig or read from /proc/net/arp and you can easily get the Hardware address. Is there a file in android that I can read? There has to be a way to get this address since it's shown in the "Settings About Phone Status" of the phone.

    Read the article

  • Windows XP Network installation from Linux server ( RHEL 5)

    - by Kumar P
    How can i make network installation ( for install Windows XP ) from Linux ( RHEL 5 Server ) ? There is option in linux server to install client machine with linux by network installation. As same as windows server have option to install client machine with windows operating system. Now i want to know steps for linux server (RHEL5) to install client machine with windows operating system (Windows XP) *sorry for poor english

    Read the article

  • Linux Kernel Driver for video capture

    - by Stoopkid
    I have this EasyCap video capture thing with a USBTV007 chip and I really would like to get it working on my little linux mint 17 laptop so that I can capture video for my RC stuff. But I do not know what to do with this linux kernel driver. I don't even know how to get these files, I assume it is something like git. http://linuxtv.org/wiki/index.php/Easycap#USBTV007_EasyCAP I am looking for a beginner friendly explanation on what to do with this: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/media/usb/usbtv

    Read the article

  • Linux not picking up new partition correctly on emc pseudo device

    - by James
    Hi We have a database server running oracle rac. We were recently running out of space on the main LUN that it is attached to. I created a new 100GB LUN and concatenated this onto the existing LUN creating a new MetaLUN. After some messing I managed to get linux to recognise the new space. I then created a new partition in on the pseudo device, to use the new space. Previously when I have done this on other system the next step is to create an ASM disk on the new partition and add this disk to the oracle disk group. This however fails. I am aware of various issues with ASM and powerpath, but I don't think this is the issue here. As on while investigating the issue I discovered that one of the underlying logical device is not reflecting the size change. See below; Powermt displays all of the underlying logical units [root@XXXXX~]# powermt display dev=emcpowerd Pseudo name=emcpowerd CLARiiON ID=CKM00091500009 [VFRAC2] Logical device ID=6006016030312200787502866C65DE11 [LUN 30] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A Array failover mode: 1 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 3 qla2xxx sde SP A0 active alive 0 0 3 qla2xxx sdj SP B0 active alive 0 0 4 qla2xxx sdo SP A1 active alive 0 0 4 qla2xxx sdt SP B1 active alive 0 0 Fdisk on the pseudo device shows correct space. [root@XXXXX ~]# fdisk -l /dev/emcpowerd Disk /dev/emcpowerd: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowerd1 1 39162 314568733+ 83 Linux /dev/emcpowerd2 39163 52216 104856255 83 Linux fdisk on one of the logical units is wrong [root@XXXXX~]# fdisk -l /dev/sde Disk /dev/sde: 322.1 GB, 322122547200 bytes 255 heads, 63 sectors/track, 39162 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 39162 314568733+ 83 Linux /dev/sde2 39163 52216 104856255 83 Linux fdisk on the rest of the units is fine [root@XXXXX ~]# fdisk -l /dev/sdj Disk /dev/sdj: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 39162 314568733+ 83 Linux /dev/sdj2 39163 52216 104856255 83 Linux Also when I created the the partition linux did not create the any entries in the /dev directory for the second partition so I created these manually [root@XXXXX dev]# mknod sde2 b 8 66 [root@XXXXX dev]# ls -al sd[ejot]? brw-r----- 1 root disk 8, 65 Dec 29 14:20 sde1 brw-r--r-- 1 root disk 8, 66 Apr 8 20:31 sde2 brw-r----- 1 root disk 8, 145 Dec 29 14:19 sdj1 brw-r--r-- 1 root disk 8, 146 Apr 8 20:33 sdj2 brw-r----- 1 root disk 8, 225 Apr 6 23:12 sdo1 brw-r--r-- 1 root disk 8, 226 Apr 8 20:33 sdo2 brw-r----- 1 root disk 65, 49 Dec 29 14:19 sdt1 brw-r--r-- 1 root disk 65, 50 Apr 8 20:33 sdt2 This is a production server that we cannot easily reboot. Any ideas would be much appreciated. J

    Read the article

  • how to create a bootable usb on mac to install ubuntu into a formatted PC?

    - by kutayk
    hi I have a working MacBook Pro and a crashed Windows 7 PC. I was running Ubuntu on my PC but after a recurrent issue now I can't boot either OS. I would like to install only ubuntu to my PC and will make Windows 7 history for good. But I am a bit puzzled with cretatinf bootable usb options on the website. If I create a bootable USB on my MAc following the instructions for MAc OS, would it boot in A PC?

    Read the article

  • Essential topics to be discussed in Linux 101

    - by zengr
    Hi, We are organizing a Linux 101 Workshop for undergrad and grad students. Can you share some ideas/topics that are must for people who are just starting with Linux. Preconditions: No knowledge of Linux OS, philosophy and technical aspects (kernel, shell, commands) Post conditions: A basic crash course of Linux which will give them a good start and answer some basic questions asked on it.

    Read the article

  • Boot Ubuntu on USB flash drive in Mac OS X 10.4... and Ubuntu

    - by thetester
    I would like to create an OS-agnostic installation of Ubuntu on a flash drive, that boots under Ubuntu and under Mac OS X. Ideally the process would look like: Install Ubuntu 11.10 (or 12.04 if necessary) on a flash drive (from Ubuntu). Boot from flash drive (on PC) to modify files, etc. Plug drive into Mac with OS X 10.4, boot to Ubuntu from it, and use. I have an 8G flash drive. What is the sanest way to do this?

    Read the article

  • ARM Linux kernel debugging on AT91SAM9261

    - by agg
    I have ported Linux to AT91SAM9261 board, I have compiled my own Bootstrap, Uboot, Kernel and filesystem. Now I want to debug my Linux kernel 2.6.30 using KGDB and GDB. I have host with Ubuntu installed and target (AT91SAM9261) with kernel 2.6.30, I want to debug my Linux kernel 2.6.30 using serial/Ethernet. In KGDB official site they have given KGDB patch for x86, but not for ARM. Is it possible to debug my ARM linux kernel on AT91SAM9261?

    Read the article

  • Linux Device Driver: Symbol "memcpy" not found

    - by Hinton
    Hello, I'm trying to write a Linux device driver. I've got it to work really well, until I tried to use "memcpy". I don't even get a compiler error, when I "make" it just warns me: WARNING: "memcpy" [/root/homedir/sv/main.ko] undefined! OK and when I try to load via insmod, I get on the console: insmod: error inserting './main.ko': -1 Unknown symbol in module and on dmesg: main: Unknown symbol memcpy (err 0) I include the following: #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/kernel.h> /* printk() */ #include <linux/slab.h> /* kmalloc() */ #include <linux/fs.h> /* everything... */ #include <linux/errno.h> /* error codes */ #include <linux/types.h> /* size_t */ #include <linux/fcntl.h> /* O_ACCMODE */ #include <linux/cdev.h> #include <asm/system.h> /* cli(), *_flags */ #include <asm/uaccess.h> /* copy_*_user */ The function using memcpy: static int dc_copy_to_user(char __user *buf, size_t count, loff_t *f_pos, struct sv_data_dev *dev) { char data[MAX_KEYLEN]; size_t i = 0; /* Copy the bulk as long as there are 10 more bytes to copy */ while (i < (count + MAX_KEYLEN)) { memcpy(data, &dev->data[*f_pos + i], MAX_KEYLEN); ec_block(dev->key, data, MAX_KEYLEN); if (copy_to_user(&buf[i], data, MAX_KEYLEN)) { return -EFAULT; } i += MAX_KEYLEN; } return 0; } Could someone help me? I thought the thing was in linux/string.h, but I get the error just the same. I'm using kernel 2.6.37-rc1 (I'm doing in in user-mode-linux, which works only since 2.6.37-rc1). Any help is greatly appreciated. # Context dependent makefile that can be called directly and will invoke itself # through the kernel module building system. KERNELDIR=/usr/src/linux ifneq ($(KERNELRELEASE),) EXTRA_CFLAGS+=-I $(PWD) -ARCH=um obj-m := main.o else KERNELDIR ?= /lib/modules/$(shell uname -r)/build PWD = $(shell pwd) all: $(MAKE) V=1 ARCH=um -C $(KERNELDIR) M=$(PWD) modules clean: rm -rf Module.symvers .*.cmd *.ko .*.o *.o *.mod.c .tmp_versions *.order endif

    Read the article

  • How to Bridge Two Ethernet Ports on Mac OS X

    - by Rabarberski
    How can I bridge two wired ethernet interfaces on Mac OS X (e.g. the current MacPro comes with two ethernet ports)? Googling turned up (e.g. this Apple forum post and this openvpn post) that this is fairly easy on Linux (using the brctl command) and under Windows (via Network Connections right-click Bridge Connections), but how is it done under Mac OS X? BTW: There also doesn't seem to be a macport for brctl ('port search brctl' didn't turn up any results) Note: I don't want to have 'internet sharing', which creates a new network (by handing out network addresses in a new range). I want to really 'bridge' two interfaces so to keep the same network subnet.

    Read the article

  • How to read MAC address with python

    - by getjoefree
    Earlier, I could read MAC address with awk tools in Windows or Windows PE 4.0, but now it don't support Windows PE 4.0 64-bit. I want to get this result "set mac=A4BADB9D1E8E" with python 2.6, who could help to me. As follows: ipconfig -all|sed -nrf getmac.sed | sed -e "s/-//g" > D:\LOG\WINMAC.BAT getmac.sed: /Realtek/ { n; s/.*: ([-0-9A-F]+)/set winmac=\1/p; } and "ipconfig -all" command log as bellows ipconfig -all >mac.log Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : WKSCN.WISTRON Description . . . . . . . . . . . : Realtek PCIe FE Family Controller Physical Address. . . . . . . . . : 24-B6-FD-1F-41-E7 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes --------------------------------------- we can get Physical Address when plug in lan cable, but not plug the network cable, it is impossible to obtain IP address.

    Read the article

  • Mac Mini Wake on Lan

    - by ILMV
    My Mac Mini has a setting in the Energy Saver category called Wake for Ethernet network access. Now the way I read this option is that any network access to the Mac whilst it is asleep will wake it up, but it doesn't. I have read that I have to send it the magic packet to wake it up, but what I really want to do is be able to simply attempt to access the Mini over the network and it wake up on demand without sending a magic packet. Can this be done? If it helps I am using a Netgear router.

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >