Search Results

Search found 2748 results on 110 pages for 'paste'.

Page 26/110 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Can't Copy to Clipboard from Vim

    - by maksim
    I'm running Vim 7.3 under Linux Mint 13 (using MATE) and I'm not able to save text to the system clipboard. I run Vim in the terminal and copy text from the terminal with CTRLINSERT. When I select text in Vim (either with the mouse or in visual mode), CTRLINSERT doesn't copy any text. In addition when I right-click, Copy is grayed out. Further, I can't write to the system buffer by yanking to the corresponding register using vim commands. However, I'm able to paste while in insert mode (using SHIFTINSERT or right-click paste). I'm also able to copy text directly from the terminal using the same technique, just not text from Vim. Here is my current ~/.vimrc. The relevant part is most likely set clipboard=autoselect,unnamed,exclude:cons\|linux. If I put finish at the top of my ~/.vimrc, I have the same issue, so I think the line is wrong, but I've tried set clipboard=unnamed and had the same behavior. Could there be another config file affecting Vim's behavior? How can I change my ~/.vimrc to allow me to copy text from Vim?

    Read the article

  • Excel VBA: select every other cell in a row range to be copied and pasted vertically

    - by terry alexander
    i have a 2200+ page text file. It is delivered from a customer through a data exchange to us with astericks to separate values and tildes (~) to denote the end of a row. The file is sent to me as a text file in Word. Most rows are split in two (1 row covers a full line and part of a second line). i transfer segments (10 page chunks) of it at a time into Excel where, unfortunately, any zeroes that occur at the end of a row get discarded in the "text to columns" procedure. So, i eyeball every "long" row to insure that zeroes were not lost and manually re-enter any that were. Here is a small bit of sample data: SDQ EA 92 1551 378 1601 151 1603 157 1604 83 The "SDQ, EA, and 92" are irrelevant (artifacts of data transmission). i want to use Excel VBA to select 1551, 1601, 1603, and 1604 (these are store numbers) so that i can copy those values and transpose paste them vertically. i will then go back and copy 378, 151, 157, and 83 (sales values) so that i can transpose paste them next to the store numbers. The next two rows of data contain the same store numbers but give the corresponding dollar values. i will only need to copy the dollar values so they can be transpose pasted vertically next to unit values (e.g. 378, 151, 157, and 83). Just being able to put my cursor on the first cell of interest in the row and run a macro to copy every other cell would speed up my work tremendously. i have tried using activecell and offset references to select a range to copy but have not been successful. Does any have any suggestions for me? Thanks in advance for the help.

    Read the article

  • Can not copy files from NTFS partition

    - by Ali
    I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

    Read the article

  • Move an existing RAID 5 array from Ubuntu to Gentoo

    - by Cocoabean
    I have a 64-bit Ubuntu machine with a 4-disk RAID 5 using software raid (md). I've been able to boot an Ubuntu LiveCD and recognize the array with a simple mdadm -A /dev/md0. It was easy to mount after that and nothing had to rebuild. I'm installing Gentoo on this box now (multi-boot, non-RAID root partition) and I have md auto-detect turned on in the kernel. When I boot Gentoo I get: "invalid superblock magic on sdd" for each of the drives in the array. I boot back to Ubuntu and they mount no problem. I tried copying the mdadm.conf that works in Ubuntu to Gentoo, and then ran mdadm -A /dev/md0 but it reports that there is no array named md0. I don't want to lose data (obviously) and I don't want to have to let the RAID rebuild every time I switch between OSes. Any help is appreciated. Both are using mdadm 3.1.4 Both are running 64-bit kernels. mdadm -D /dev/md0 from Ubuntu yields: http://pastebin.com/5gj2QNkV UPDATE: After rebooting I noticed that it still complains about invalid blocks, but cat /proc/mdstat shows an inactive /dev/md127 with the same disks as my raid. I want to mount it but I don't want to get stuck waiting for a rebuild or destroying it inadvertently. mdadm -D /dev/md127 Here is pastebin of mdadm -D /dev/md127 on gentoo: http://pastebin.com/gDCWn0Rn UPDATE II: dmesg output about 'invalid raid superblocks' http://paste.ubuntu.com/885471/ fdisk -l from Ubuntu, /dev/md0 does not have any partitions but I do have it mounted and accessible: http://paste.ubuntu.com/885475/

    Read the article

  • File corruption after copying files in Windows 7 64 bit using two methods

    - by DustByte
    I have 5000 pictures and other files in a directory taking up 35 GB. I want to duplicate this directory. Method 1: I do a simple copy and paste of the directory in explorer. I have the habit of checking the checksums after copying important files. In this case I noticed that around 2000 files failed the MD5 test. At a closer inspection of a randomly chosen JPEG with different checksums it turns out that some XMP metadata had changed. In particular, the tag <MicrosoftPhoto:DateAcquired> had changed the date from 2009 to today (possibly around the time I was copying the files). I have no idea what triggered this XMP data to be changed and exactly when it was changed and why for these particular files, but at least it seems to explain the checksum discrepancy. Method 2: As I want the exact files to be duplicated, I tried the program FreeFileSync to mirror the directory, hoping no XMP metadata would mysteriously change. A checksum test in addition to a thorough file comparison test in FreeFileSync lead to two similar but yet different results: 31 files fail the checksum test, 23 files fail the file comparison test. The smaller set is not entirely contained in the bigger set, although many files occur in both. What is alarming here is that not only JPEGs are flagged as altered but also som AVIs, MPGs and a large 7-zip file. Closer inspection of a JPEG indicates that it is indeed corrupt: the bottom half of the picture is simply plain gray. Due to the size of the 7-zip file, I have not been able to pin down the discrepancy. Note, in both methods, every file has its correct file size after being copied. Question: Any thoughts on what is possibly going on here? I have never had this problem before, and I am now terrified that files get corrupted after simple actions like copy/paste and file sync. Even if I manage to successfully copy the files somehow, I would still like an explanation to this.

    Read the article

  • MS Word 2010: Hide citation title when 2 publications by same first author from different years are in one citation block

    - by srunni
    I'm trying to hide the display of the titles for two publications by the same first author from different years that are in the same citation block. By default, the title is shown in citations when there are two publications by the same author in a given document. The easiest way to get around this is to right click on the citation, click "Edit Citation", and then suppress the title. However, the issue with this is that if there are 2 citations in 1 citation block (i.e., "(Smith, J., et al. 2010, Smith, J., et al. 2011)" rather than "(Smith, J., et al. 2010) (Smith, J., et al. 2011)"), then using that suppress option only suppresses the title for the first citation (in this case, the 2010 publication). OTOH, if I try to initially insert the publications in separate citation blocks, I can suppress the title in both citations, but I can't cut and paste one into the other's citation block. I can click "Cut" and the citation that was just cut disappears, but the "Paste" option is not available when my cursor is in the second citation block. Any ideas? Thanks!

    Read the article

  • Hardware issue: computer plays beep sounds at startup, and then turns off

    - by Darkkurama
    Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

    Read the article

  • Save and restore multiple layers within a Photoshop action that flattens

    - by SuitCase
    I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

    Read the article

  • Can not copy files after installing windows

    - by Ali
    I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

    Read the article

  • Finding matching columns in excel

    - by fakaff
    I've never used excel before so I need the simplest solution available, and this is a work assignment due this week so I didn't have time read much of the documentation. Basically, I have two tables, A and B, and they are both thousands of rows long. Description of my task: right now (since I don't know better) I'm manually doing this: Go to row i in table B. Select entries in columns B(a, b, c) of that same row. Look for a row in table A where column A(b) matches row B(a). Paste the entries of columns B(a) of row i at the end of the row found in the last step. Repeat for row i + 1. Example: row B(cat, dog, mouse) matches A(mammal, cat, Mr. Whiskers). So I would paste B after A and have A(mammal, cat, Mr. Whiskers, cat, dog, mouse). Note: I am not joining tables. I am merely extending table A by pasting row A(b) if row A(b) matches row B(a). Also, sometimes entries are spelled slightly differently. Using wildcards to search for candidates would be of help. As the description should let on, this task is very tedious and inefficient if I don't know how to automate some operations (there are thousands of entries). Any quick tips as to how to be more productive is a big help.

    Read the article

  • How could I embed formatted XML source in WORD documents?

    - by eckes
    I'm writing a documentation with WORD that contains XML source code (whole files) as examples. The way I'm embedding the currently XML is quite cumbersome and doesn't seem to me as really maintainable: I'm finishing the editing of the document in WORD and create a PDF from it using Acrobat next, I open my XML files (2x input files, 2x generated output files) with IE and print them with the PDF printer supplied by Acrobat now, I open up Acrobat Pro and attach the four XML-PDF files to my original document The problem with that work flow for me is that it involves too much manual labor in order to get the documentation done. What I've tried up to now is not really satisfying for me: converting each XML to PDF and appending them like described above opening the XML files with SCiTE, copy as RTF and paste into Word playing around with the LaTeX packages minted, pygments and listings (I could write the docs with LaTeX too) but found some unsolvable problems in each of these packages I'm searching for a way that produces my documentation more automatic. For example embedding the XML files including formatting of IE (which I find quite readable). The files should be included by reference so that I don't have to paste the XML sources manually every time the XML changes.

    Read the article

  • Proper approach to debug PC startup problems (POST)

    - by saurabhj
    My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

    Read the article

  • How can I read PDFs with e-reader on a Lenovo tablet?

    - by Jack M
    This is my first time using a tablet and I'm totally lost - this must be what computers look like to old people. This is a Lenovo Thinkpad tablet. I don't see a specific model number on it (it was passed down to me second hand). What I'd like to do is read a PDF. I'm fairly certain I successfully transferred the PDF onto the tablet via an SD card, and I noticed this thing has an app called "eReader" on it, so I started that up. All I see are empty bookshelves, and no obvious buttons or settings anywhere. I saw in multiple places that you have to, as one site puts it: ...copy and paste the relevant files into the eBooks folder and they will appear on the eReader shelf for your consumption... But I have no idea how to: Access the file system. Locate the eBooks folder. Copy and paste files. Will I need a file explorer app? If so, how can I install that given that my only method of getting data onto this tablet is an SD card (no wireless internet).

    Read the article

  • Save and restore multiple layers within a Photoshop action that flattens

    - by SuitCase
    I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

    Read the article

  • Strange Behaviour with Unicode Characters in Windows

    - by open_sourse
    Ok, I do not know if this is a programming question, but it certainly is a technical one so I am asking it here. I was working on some internationalization stuff in my PHP code, and in order to ensure that my generated HTML shows up Unicode correctly based on the encoding and stuff I decided to add some Chinese text to my PHP page, which then echoes it into the browser to complete my test case. So I went into google and typed "Chinese", copied the first Chinese text that the search returned (which was ??/??). I then copied it into Notepad++ which is my editor, and to my surprise showed up as boxes similar to [][]/[][]. So I thought the encoding in Notepad++ was messed up and I changed the encoding to UTF-8 and UCS, neither worked. I did it fresh in a newly encoded file, still I got the boxes. The same content when I paste into Google and StackOverFlow (like I did in this posting) shows up correct Chinese! I even opened up Windows Clipboard Viewer and the content is represented in the Clipboard as boxes! I tried pasting it into Windows Explorer address bar and using to rename a file to, but I still get boxes. But it shows up correctly when pasted into my Chrome Browser address bar! Is this a Windows issue? Since I am able to paste it correctly in SO, the data in memory should be encoded correctly right? But if that is the case why does it show up as boxes in the Clipboard Viewer? I am confused here...By the way I am using Windows XP with SP3. (I am asking this question here, even if it is not programmatic, because it is preventing me from running my programming test cases..)

    Read the article

  • NOTEPAD++ Need macro or typeitin for automation of large lists

    - by user2526699
    I'm sure there is a way to do this but I can not seem to figure it out. I will try my best to explain this. I have a list with 20,000 lines in notepad++. I have two tabs open in notepad++. The right side tab is the main list. The left side tab is what needs to be added to the beginning of each line in the right tab. Here is an image of my notepad++ to give you a better understanding. I need to be able to do the following in an automated way as I have over 20,000 lines to do this way. copy line 1 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 1 of tab 'new 7') at beginning of line 1 tab 'new 6' switch back to tab 'new 7' copy line 2 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 2 of tab 'new 7') at beginning of line 2 tab 'new 6' I have both pasteitin and typeitin download but if i need some other program/app or if it's built in to notepad++ that would be great. I need to do this by the program itself or for me to only have to press a button to do each of these.

    Read the article

  • Run Windows in Ubuntu with VMware Player

    - by Matthew Guay
    Are you an enthusiast who loves their Ubuntu Linux experience but still needs to use Windows programs?  Here’s how you can get the full Windows experience on Ubuntu with the free VMware Player. Linux has become increasingly consumer friendly, but still, the wide majority of commercial software is only available for Windows and Macs.  Dual-booting between Windows and Linux has been a popular option for years, but this is a frustrating solution since you have to reboot into the other operating system each time you want to run a specific application.  With virtualization, you’ll never have to make this tradeoff.  VMware Player makes it quick and easy to install any edition of Windows in a virtual machine.  With VMware’s great integration tools, you can copy and paste between your Linux and Windows programs and even run native Windows applications side-by-side with Linux ones. Getting Started Download the latest version of VMware Player for Linux, and select either the 32-bit or 64-bit version, depending on your system.  VMware Player is a free download, but requires registration.  Sign in with your VMware account, or create a new one if you don’t already have one. VMware Player is fairly easy to install on Linux, but you will need to start out the installation from the terminal.  First, enter the following to make sure the installer is marked as executable, substituting version/build_number for the version number on the end of the file you downloaded. chmod +x ./VMware-Player-version/build_number.bundle Then, enter the following to start the install, again substituting your version number: gksudo bash ./VMware-Player-version/build_number.bundle You may have to enter your administrator password to start the installation, and then the VMware Player graphical installer will open.  Choose whether you want to check for product updates and submit usage data to VMware, and then proceed with the install as normal. VMware Player installed in only a few minutes in our tests, and was immediately ready to run, no reboot required.  You can now launch it from your Ubuntu menu: click Applications \ System Tools \ VMware Player. You’ll need to accept the license agreement the first time you run it. Welcome to VMware Player!  Now you can create new virtual machines and run pre-built ones on your Ubuntu desktop. Install Windows in VMware Player on Ubuntu Now that you’ve got VMware setup, it’s time to put it to work.  Click the Create a New Virtual Machine as above to start making a Windows virtual machine. In the dialog that opens, select your installer disk or ISO image file that you want to install Windows from.  In this example, we’re select a Windows 7 ISO.  VMware will automatically detect the operating system on the disk or image.  Click Next to continue. Enter your Windows product key, select the edition of Windows to install, and enter your name and password. You can leave the product key field blank and enter it later.  VMware will ask if you want to continue without a product key, so just click Yes to continue. Now enter a name for your virtual machine and select where you want to save it.  Note: This will take up at least 15Gb of space on your hard drive during the install, so make sure to save it on a drive with sufficient storage space. You can choose how large you want your virtual hard drive to be; the default is 40Gb, but you can choose a different size if you wish.  The entire amount will not be used up on your hard drive initially, but the virtual drive will increase in size up to your maximum as you add files.  Additionally, you can choose if you want the virtual disk stored as a single file or as multiple files.  You will see the best performance by keeping the virtual disk as one file, but the virtual machine will be more portable if it is broken into smaller files, so choose the option that will work best for your needs. Finally, review your settings, and if everything looks good, click Finish to create the virtual machine. VMware will take over now, and install Windows without any further input using its Easy Install.  This is one of VMware’s best features, and is the main reason we find it the easiest desktop virtualization solution to use.   Installing VMware Tools VMware Player doesn’t include the VMware Tools by default; instead, it automatically downloads them for the operating system you’re installing.  Once you’ve downloaded them, it will use those tools anytime you install that OS.  If this is your first Windows virtual machine to install, you may be prompted to download and install them while Windows is installing.  Click Download and Install so your Easy Install will finish successfully. VMware will then download and install the tools.  You may need to enter your administrative password to complete the install. Other than this, you can leave your Windows install unattended; VMware will get everything installed and running on its own. Our test setup took about 30 minutes, and when it was done we were greeted with the Windows desktop ready to use, complete with drivers and the VMware tools.  The only thing missing was the Aero glass feature.  VMware Player is supposed to support the Aero glass effects in virtual machines, and although this works every time when we use VMware Player on Windows, we could not get it to work in Linux.  Other than that, Windows is fully ready to use.  You can copy and paste text, images, or files between Ubuntu and Windows, or simply drag-and-drop files between the two. Unity Mode Using Windows in a window is awkward, and makes your Windows programs feel out of place and hard to use.  This is where Unity mode comes in.  Click Virtual Machine in VMware’s menu, and select Enter Unity. Your Windows desktop will now disappear, and you’ll see a new Windows menu underneath your Ubuntu menu.  This works the same as your Windows Start Menu, and you can open your Windows applications and files directly from it. By default, programs from Windows will have a colored border and a VMware badge in the corner.  You can turn this off from the VMware settings pane.  Click Virtual Machine in VMware’s menu and select Virtual Machine Settings.  Select Unity under the Options tab, and uncheck the Show borders and Show badges boxes if you don’t want them. Unity makes your Windows programs feel at home in Ubuntu.  Here we have Word 2010 and IE8 open beside the Ubuntu Help application.  Notice that the Windows applications show up in the taskbar on the bottom just like the Linux programs.  If you’re using the Compiz graphics effects in Ubuntu, your Windows programs will use them too, including the popular wobbly windows effect. You can switch back to running Windows inside VMware Player’s window by clicking the Exit Unity button in the VMware window. Now, whenever you want to run Windows applications in Linux, you can quickly launch it from VMware Player. Conclusion VMware Player is a great way to run Windows on your Linux computer.  It makes it extremely easy to get Windows installed and running, lets you run your Windows programs seamlessly alongside your Linux ones.  VMware products work great in our experience, and VMware Player on Linux was no exception. If you’re a Windows user and you’d like to run Ubuntu on Windows, check out our article on how to Run Ubuntu in Windows with VMware Player. Link Download VMware Player 3 (Registration required) Download Windows 7 Enterprise 90-day trial Similar Articles Productive Geek Tips Enable Copy and Paste from Ubuntu VMware GuestInstall VMware Tools on Ubuntu Edgy EftRestart the Ubuntu Gnome User Interface QuicklyHow to Add a Program to the Ubuntu Startup List (After Login)How To Run Ubuntu in Windows 7 with VMware Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

    Read the article

  • Visual Studio 2010 Extension Manager (and the new VS 2010 PowerCommands Extension)

    - by ScottGu
    This is the twenty-third in a series of blog posts I’m doing on the VS 2010 and .NET 4 release. Today’s blog post covers some of the extensibility improvements made in VS 2010 – as well as a cool new "PowerCommands for Visual Studio 2010” extension that Microsoft just released (and which can be downloaded and used for free). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Extensibility in VS 2010 VS 2010 provides a much richer extensibility model than previous releases.  Anyone can build extensions that add, customize, and light-up the Visual Studio 2010 IDE, Code Editors, Project System and associated Designers. VS 2010 Extensions can be created using the new MEF (Managed Extensibility Framework) which is built-into .NET 4.  You can learn more about how to create VS 2010 extensions from this this blog post from the Visual Studio Team Blog. VS 2010 Extension Manager Developers building extensions can distribute them on their own (via their own web-sites or by selling them).  Visual Studio 2010 also now includes a built-in “Extension Manager” within the IDE that makes it much easier for developers to find, download, and enable extensions online.  You can launch the “Extension Manager” by selecting the Tools->Extension Manager menu option: This loads an “Extension Manager” dialog which accesses an “online gallery” at Microsoft, and then populates a list of available extensions that you can optionally download and enable within your copy of Visual Studio: There are already hundreds of cool extensions populated within the online gallery.  You can browse them by category (use the tree-view on the top-left to filter them).  Clicking “download” on any of the extensions will download, install, and enable it. PowerCommands for Visual Studio 2010 This weekend Microsoft released the free PowerCommands for Visual Studio 2010 extension to the online gallery.  You can learn more about it here, and download and install it via the “Extension Manager” above (search for PowerCommands to find it). The PowerCommands download adds dozens of useful commands to Visual Studio 2010.  Below is a screen-shot of just a few of the useful commands that it adds to the Solution Explorer context menus: Below is a list of all the commands included with this weekend’s PowerCommands for Visual Studio 2010 release: Enable/Disable PowerCommands in Options dialog This feature allows you to select which commands to enable in the Visual Studio IDE. Point to the Tools menu, then click Options. Expand the PowerCommands options, then click Commands. Check the commands you would like to enable. Note: All power commands are initially defaulted Enabled. Format document on save / Remove and Sort Usings on save The Format document on save option formats the tabs, spaces, and so on of the document being saved. It is equivalent to pointing to the Edit menu, clicking Advanced, and then clicking Format Document. The Remove and sort usings option removes unused using statements and sorts the remaining using statements in the document being saved. Note: The Remove and sort usings option is only available for C# documents. Format document on save and Remove and sort usings both are initially defaulted OFF. Clear All Panes This command clears all output panes. It can be executed from the button on the toolbar of the Output window. Copy Path This command copies the full path of the currently selected item to the clipboard. It can be executed by right-clicking one of these nodes in the Solution Explorer: The solution node; A project node; Any project item node; Any folder. Email CodeSnippet To email the lines of text you select in the code editor, right-click anywhere in the editor and then click Email CodeSnippet. Insert Guid Attribute This command adds a Guid attribute to a selected class. From the code editor, right-click anywhere within the class definition, then click Insert Guid Attribute. Show All Files This command shows the hidden files in all projects displayed in the Solution Explorer when the solution node is selected. It enhances the Show All Files button, which normally shows only the hidden files in the selected project node. Undo Close This command reopens a closed document , returning the cursor to its last position. To reopen the most recently closed document, point to the Edit menu, then click Undo Close. Alternately, you can use the CtrlShiftZ shortcut. To reopen any other recently closed document, point to the View menu, click Other Windows, and then click Undo Close Window. The Undo Close window appears, typically next to the Output window. Double-click any document in the list to reopen it. Collapse Projects This command collapses a project or projects in the Solution Explorer starting from the root selected node. Collapsing a project can increase the readability of the solution. This command can be executed from three different places: solution, solution folders and project nodes respectively. Copy Class This command copies a selected class entire content to the clipboard, renaming the class. This command is normally followed by a Paste Class command, which renames the class to avoid a compilation error. It can be executed from a single project item or a project item with dependent sub items. Paste Class This command pastes a class entire content from the clipboard, renaming the class to avoid a compilation error. This command is normally preceded by a Copy Class command. It can be executed from a project or folder node. Copy References This command copies a reference or set of references to the clipboard. It can be executed from the references node, a single reference node or set of reference nodes. Paste References This command pastes a reference or set of references from the clipboard. It can be executed from different places depending on the type of project. For CSharp projects it can be executed from the references node. For Visual Basic and Website projects it can be executed from the project node. Copy As Project Reference This command copies a project as a project reference to the clipboard. It can be executed from a project node. Edit Project File This command opens the MSBuild project file for a selected project inside Visual Studio. It combines the existing Unload Project and Edit Project commands. Open Containing Folder This command opens a Windows Explorer window pointing to the physical path of a selected item. It can be executed from a project item node Open Command Prompt This command opens a Visual Studio command prompt pointing to the physical path of a selected item. It can be executed from four different places: solution, project, folder and project item nodes respectively. Unload Projects This command unloads all projects in a solution. This can be useful in MSBuild scenarios when multiple projects are being edited. This command can be executed from the solution node. Reload Projects This command reloads all unloaded projects in a solution. It can be executed from the solution node. Remove and Sort Usings This command removes and sort using statements for all classes given a project. It is useful, for example, in removing or organizing the using statements generated by a wizard. This command can be executed from a solution node or a single project node. Extract Constant This command creates a constant definition statement for a selected text. Extracting a constant effectively names a literal value, which can improve readability. This command can be executed from the code editor by right-clicking selected text. Clear Recent File List This command clears the Visual Studio recent file list. The Clear Recent File List command brings up a Clear File dialog which allows any or all recent files to be selected. Clear Recent Project List This command clears the Visual Studio recent project list. The Clear Recent Project List command brings up a Clear File dialog which allows any or all recent projects to be selected. Transform Templates This command executes a custom tool with associated text templates items. It can be executed from a DSL project node or a DSL folder node. Close All This command closes all documents. It can be executed from a document tab. How to temporarily disable extensions Extensions provide a great way to make Visual Studio even more powerful, and can help improve your overall productivity.  One thing to keep in mind, though, is that extensions run within the Visual Studio process (DevEnv.exe) and so a bug within an extension can impact both the stability and performance of Visual Studio.  If you ever run into a situation where things seem slower than they should, or if you crash repeatedly, please temporarily disable any installed extensions and see if that fixes the problem.  You can do this for extensions that were installed via the online gallery by re-running the extension manager (using the Tools->Extension Manager menu option) and by selecting the “Installed Extensions” node on the top-left of the dialog – and then by clicking “Disable” on any of the extensions within your installed list: Hope this helps, Scott

    Read the article

  • Add Free Google Apps to Your Website or Blog

    - by Matthew Guay
    Would you like to have an email address from your own domain, but prefer Gmail’s interface and integration with Google Docs?  Here’s how you can add the free Google Apps Standard to your site and get the best of both worlds. Note: To signup for Google Apps and get it setup on your domain, you will need to be able to add info to your WordPress blog or change Domain settings manually. Getting Started Head to the Google Apps signup page (link below), and click the Get Started button on the right.  Note that we are signing up for the free Google Apps which allows a max of 50 users; if you need more than 50 email addresses for your domain, you can choose Premiere Edition instead for $50/year. Select that you are the Administrator of the domain, and enter the domain or subdomain you want to use with Google Apps.  Here we’re adding Google Apps to the techinch.com site, but we could instead add Apps to mail.techinch.com if needed…click Get Started. Enter your name, phone number, an existing email address, and other Administrator information.  The Apps signup page also includes some survey questions about your organization, but you only have to fill in the required fields. On the next page, enter a username and password for the administrator account.  Note that the user name will also be the administrative email address as [email protected]. Now you’re ready to authenticate your Google Apps account with your domain.  The steps are slightly different depending on whether your site is on WordPress.com or on your own hosting service or server, so we’ll show how to do it both ways.   Authenticate and Integrate Google Apps with WordPress.com To add Google Apps to a domain you have linked to your WordPress.com blog, select Change yourdomain.com CNAME record and click Continue. Copy the code under #2, which should be something like googleabcdefg123456.  Do not click the button at the bottom; wait until we’ve completed the next step.   Now, in a separate browser window or tab, open your WordPress Dashboard.  Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Google Apps. Scroll down to the Google Apps section, and paste your code from Google Apps into the verification code field.  Click Generate DNS records when you’re done. This will add the needed DNS settings to your records in the box above the Google Apps section.  Click Save DNS records. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Authenticate Google Apps on Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Google Apps to your domain.  You can add a CNAME record to your domain host using the same information that you would use with a WordPress account, or you can upload an HTML file to your site’s main directory.  In this test we’re going to upload an HTML file to our site for verification. Copy the code under #1, which should be something like googleabcdefg123456.  Do not click the button at the bottom; wait until we’ve completed the next step first. Create a new HTML file and paste the code in it.  You can do this easily in Notepad: create a new document, paste the code, and then save as googlehostedservice.html.  Make sure to select the type as All Files or otherwise the file will have a .txt extension. Upload this file to your web server via FTP or a web dashboard for your site.  Make sure it is in the top level of your site’s directory structure, and try visiting it at yoursite.com/googlehostedservice.html. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Setup Your Email on Google Apps When this is done, your Google Apps account should be activated and ready to finish setting up.  Google Apps will offer to launch a guide to step you through the rest of the process; you can click Launch guide if you want, or click Skip this guide to continue on your own and go directly to the Apps dashboard.   If you choose to open the guide, you’ll be able to easily learn the ropes of Google Apps administration.  Once you’ve completed the tutorial, you’ll be taken to the Google Apps dashboard. Most of the Google Apps will be available for immediate use, but Email may take a bit more setup.  Click Activate email to get your Gmail-powered email running on your domain.    Add Google MX Records to Your Server You will need to add Google MX records to your domain registrar in order to have your mail routed to Google.  If your domain is hosted on WordPress.com, you’ve already made these changes so simply click I have completed these steps.  Otherwise, you’ll need to manually add these records before clicking that button.   Adding MX Entries is fairly easy, but the steps may depend on your hosting company or registrar.  With some hosts, you may have to contact support to have them add the MX records for you.  Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Add MX Entries through cPanel Login to your site’s cPanel, and click the MX Entry link under Mail. Delete any existing MX Records for your domain or subdomain first to avoid any complications or interactions with Google Apps.  If you think you may want to revert to your old email service in the future, save a copy of the records so you can switch back if you need. Now, enter the MX Records that Google listed.  Here’s our account after we added all of the entries to our account. Finally, return to your Google Apps Dashboard and click the I have completed these steps button at the bottom of the page. Activating Service You’re now officially finished activating and setting up your Google Apps account.  Google will first have to check the MX records for your domain; this only took around an hour in our test, but Google warns it can take up to 48 hours in some cases. You may then see that Google is updating its servers with your account information.  Once again, this took much less time than Google’s estimate. When everything’s finished, you can click the link to access the inbox of your new Administrator email account in Google Apps. Welcome to Gmail … at your own domain!  All of the Google Apps work just the same in this version as they do in the public @gmail.com version, so you should feel right at home. You can return to the Google Apps dashboard from the Administrative email account by clicking the Manage this domain at the top right. In the Dashboard, you can easily add new users and email accounts, as well as change settings in your Google Apps account and add your site’s branding to your Apps. Your Google Apps will work just like their standard @gmail.com counterparts.  Here’s an example of an inbox customized with the techinch logo and a Gmail theme. Links to Remember Here are the common links to your Google Apps online.  Substitute your domain or subdomain for yourdomain.com. Dashboard https://www.google.com/a/cpanel/yourdomain.com Email https://mail.google.com/a/yourdomain.com Calendar https://www.google.com/calendar/hosted/yourdomain.com Docs https://docs.google.com/a/yourdomain.com Sites https://sites.google.com/a/yourdomain.com Conclusion Google Apps offers you great webapps and webmail for your domain, and let’s you take advantage of Google’s services while still maintaining the professional look of your own domain.  Setting up your account can be slightly complicated, but once it’s finished, it will run seamlessly and you’ll never have to worry about email or collaboration with your team again. Signup for the free Google Apps Standard Similar Articles Productive Geek Tips Mysticgeek Blog: Create Your Own Simple iGoogle GadgetAccess Your Favorite Google Services in Chrome the Easy WayRevo Uninstaller Pro [REVIEW]Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPFind Similar Websites in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

    Read the article

  • Integrating NetBeans for Raspberry Pi Java Development

    - by speakjava
    Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit.  It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi.  What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it.  This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK.  I will also assume that you have installed the JDK and NetBeans on your PC.  These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine.  I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off.  The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters.  For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line.  To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically.  You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options.  Select '8 Advanced Options' and on the next screen select 'A$ SSH'.  Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address.  You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file.  You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces.  In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static     address 10.0.0.2     gateway 10.0.0.254     netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key.  We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory.  Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist).  Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default.  To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine.  Follow the instructions to generate a key.  I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file".  Use PuTTY to connect to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist).  Paste the key information at the end of this file and save it. Logout and then start PuTTY again.  This time we need to create a saved session using the private key.  Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category.  Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below.  Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans).  It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project.  You will see a build.xml file.  Double click this to edit it. This file will mostly be comments.  At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="scp" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="[email protected]:NetBeans/CopyTest"/>   </exec>  </target> For Windows it will be slightly different: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="pi@raspi:NetBeans/CopyTest"/>   </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

    Read the article

  • VBA nested Loop flow control

    - by PCGIZMO
    I will be brief and stick to what I know. This code for the most part works as it should. The only issue is in the iteration of the x and z loop. these to loops should set the range and yLABEL for the Y loop. I can get through a set and come up with the correct range after that things go bonkers. I know some of it has to do with not breaking out of x to set z and then back to x update the range. It should work z is found then x. the range between them is set for y. then next x but y stays then rang between y and x is set for y.. so on and so forth kinda like a slinky down the stairs. or a slide rule depending on how I set the loops either way I end up all over the place after a couple iterations. I have done a few things but each time I break out of x to set z , X restarts at the top of the range. At least that's what I think I am seeing. In the example sheet i have since changed the way the way the offset works with the loop but the idea is still the same. I have goto statements at this time i was going to try figuring out conditional switches after the loops were working. Any help direction or advice is appreciated. Option Explicit Sub parse() Application.DisplayAlerts = False 'Application.EnableCancelKey = xlDisabled Dim strPath As String, strPathused As String strPath = "C:\clerk plan2" Dim objfso As FileSystemObject, objFolder As Folder, objfile As Object Set objfso = CreateObject("Scripting.FileSystemObject") Set objFolder = objfso.GetFolder(strPath) 'Loop through objWorkBooks For Each objfile In objFolder.Files If objfso.GetExtensionName(objfile.Path) = "xlsx" Then Dim objWorkbook As Workbook Set objWorkbook = Workbooks.Open(objfile.Path) ' Set path for move to at end of script strPathused = "C:\prodplan\used\" & objWorkbook.Name objWorkbook.Worksheets("inbound transfer sheet").Activate objWorkbook.Worksheets("inbound transfer sheet").Cells.UnMerge 'Range management WB Dim SRCwb As Worksheet, SRCrange1 As Range, SRCrange2 As Range, lastrow As Range Set SRCwb = objWorkbook.Worksheets("inbound transfer sheet") Set SRCrange1 = SRCwb.Range("g3:g150") Set SRCrange2 = SRCwb.Range("a1:a150") Dim DSTws As Worksheet Set DSTws = Workbooks("clerkplan2.xlsm").Worksheets("transfer") Dim STR1 As String, STR2 As String, xVAL As String, zVAL As String, xSTR As String, zSTR As String STR1 = "INBOUND TRANS" STR2 = "INBOUND CA TRANS" Dim x As Variant, z As Variant, y As Variant, zxRANGE As Range For Each z In SRCrange2 zSTR = Mid(z, 1, 16) If zSTR <> STR2 Then GoTo zNEXT If zSTR = STR2 Then zVAL = z End If For Each x In SRCrange2 xSTR = Mid(x, 1, 13) If xSTR <> STR1 Then GoTo xNEXT If xSTR = STR1 Then xVAL = x End If Dim yLABEL As String If xVAL = x And zVAL = z Then If x.Row > z.Row Then Set zxRANGE = SRCwb.Range(x.Offset(1, 0).Address & " : " & z.Offset(-1, 0).Address) yLABEL = z.Value Else Set zxRANGE = SRCwb.Range(z.Offset(-1, 0).Address & " : " & x.Offset(1, 0).Address) yLABEL = x.Value End If End If MsgBox zxRANGE.Address ' DEBUG For Each y In zxRANGE If y.Offset(0, 6) = "Temp" Or y.Offset(0, 14) = "Begin Time" Or y.Offset(0, 15) = "End Time" Or _ Len(y.Offset(0, 6)) = 0 Or Len(y.Offset(0, 14)) = 0 Or Len(y.Offset(0, 15)) = "0" Then yNEXT Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("c" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) y.Offset(0, 6).Copy lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False DSTws.Activate ActiveCell.Offset(0, -1) = objWorkbook.Name ActiveCell.Offset(0, -2) = yLABEL objWorkbook.Activate y.Offset(0, 14).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("d" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False objWorkbook.Activate y.Offset(0, 15).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("e" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False yNEXT: Next y xNEXT: Next x zNEXT: Next z strPathused = "C:\clerk plan2\used\" & objWorkbook.Name objWorkbook.Close False 'Move proccesed file to new Dir Dim OldFilePath As String Dim NewFilePath As String OldFilePath = objfile 'original file location NewFilePath = strPathused ' new file location Name OldFilePath As NewFilePath ' move the file End If Next End Sub

    Read the article

  • How to use a list of values in Excel as filter in a query

    - by Luca Zavarella
    It often happens that a customer provides us with a list of items for which to extract certain information. Imagine, for example, that our clients wish to have the header information of the sales orders only for certain orders. Most likely he will give us a list of items in a column in Excel, or, less probably, a simple text file with the identification code:     As long as the given values ??are at best a dozen, it costs us nothing to copy and paste those values ??in our SSMS and place them in a WHERE clause, using the IN operator, making sure to include the quotes in the case of alphanumeric elements (the database sample is AdventureWorks2008R2): SELECT * FROM Sales.SalesOrderHeader AS SOH WHERE SOH.SalesOrderNumber IN ( 'SO43667' ,'SO43709' ,'SO43726' ,'SO43746' ,'SO43782' ,'SO43796') Clearly, the need to add commas and quotes becomes an hassle when dealing with hundreds of items (which of course has happened to us!). It’d be comfortable to do a simple copy and paste, leaving the items as they are pasted, and make sure the query works fine. We can have this commodity via a User Defined Function, that returns items in a table. Simply we’ll provide the function with an input string parameter containing the pasted items. I give you directly the T-SQL code, where comments are there to clarify what was written: CREATE FUNCTION [dbo].[SplitCRLFList] (@List VARCHAR(MAX)) RETURNS @ParsedList TABLE ( --< Set the item length as your needs Item VARCHAR(255) ) AS BEGIN DECLARE --< Set the item length as your needs @Item VARCHAR(255) ,@Pos BIGINT --< Trim TABs due to indentations SET @List = REPLACE(@List, CHAR(9), '') --< Trim leading and trailing spaces, then add a CR\LF at the end of the list SET @List = LTRIM(RTRIM(@List)) + CHAR(13) + CHAR(10) --< Set the position at the first CR/LF in the list SET @Pos = CHARINDEX(CHAR(13) + CHAR(10), @List, 1) --< If exist other chars other than CR/LFs in the list then... IF REPLACE(@List, CHAR(13) + CHAR(10), '') <> '' BEGIN --< Loop while CR/LFs are over (not found = CHARINDEX returns 0) WHILE @Pos > 0 BEGIN --< Get the heading list chars from the first char to the first CR/LF and trim spaces SET @Item = LTRIM(RTRIM(LEFT(@List, @Pos - 1))) --< If the so calulated item is not empty... IF @Item <> '' BEGIN --< ...insert it in the @ParsedList temporary table INSERT INTO @ParsedList (Item) VALUES (@Item) --(CAST(@Item AS int)) --< Use the appropriate conversion if needed END --< Remove the first item from the list... SET @List = RIGHT(@List, LEN(@List) - @Pos - 1) --< ...and set the position to the next CR/LF SET @Pos = CHARINDEX(CHAR(13) + CHAR(10), @List, 1) --< Repeat this block while the upon loop condition is verified END END RETURN END At this point, having created the UDF, our query is transformed trivially in: SELECT * FROM Sales.SalesOrderHeader AS SOH WHERE SOH.SalesOrderNumber IN ( SELECT Item FROM SplitCRLFList('SO43667 SO43709 SO43726 SO43746 SO43782 SO43796') AS SCL) Convenient, isn’t it? You can find the script DBA_SplitCRLFList.sql here. Bye!!

    Read the article

  • News From EAP Testing

    - by Fatherjack
    There is a phrase that goes something like “Watch the pennies and the pounds/dollars will take care of themselves”, meaning that if you pay attention to the small things then the larger things are going to fare well too. I am lucky enough to be a Friend of Red Gate and once in a while I get told about new features in their tools and have a test copy of the software to trial. I got one of those emails a week or so ago and I have been exploring the SQL Prompt 6 EAP since then. One really useful feature of long standing in SQL Prompt is the idea of a code snippet that is automatically pasted into the SSMS editor when you type a few key letters. For example I can type “ssf” and then press the tab key and the text is expanded to SELECT * FROM. There are lots of these combinations and it is possible to create your own really easily. To create your own you use the Snippet Manager interface to define the shortcut letters and the code that you want to have put in their place. Let’s look at an example. Say I am writing a blog about something and want to have the demo code create a temporary table. It might looks like this; The first time you run the code everything is fine, a lovely set of dates fill the results grid but run it a second time and this happens.   Yep, we didn’t destroy the temporary table so the CREATE statement fails when it finds the table already exists. No matter, I have a snippet created that takes care of this.   Nothing too technical here but you will see that in the Code section there is $CURSOR$, this isn’t a TSQL keyword but a marker for SQL Prompt to place the cursor in that position when the Code is pasted into the SSMS Editor. I just place my cursor above the CREATE statement and type “ifobj” – the shortcut for my code to DROP the temporary table – which has been defined in the Snippet Manager as below. This means I am right-away ready to type the name of the offending table. Pretty neat and it’s been very useful in saving me lots of time over many years.   The news for SQL Prompt 6 is that Red Gate have added a new Snippet Command of $PASTE$. Let’s alter our snippet to the following and try it out   Once again, we will type type “ifobj” in the SSMS Editor but first of all, highlight the name of the table #TestTable and copy it to your clipboard. Now type “ifobj” and press Tab… Wherever the string $PASTE$ is placed in the snippet, the contents of your clipboard are merged into the pasted TSQL. This means I don’t need to type the table name into the code snippet, it’s already there and I am seeing a fully functioning piece of TSQL ready to run. This means it is it even easier to write TSQL quickly and consistently. Attention to detail like this from Red Gate means that their developer tools stay on track to keep winning awards year after year and help take the hard work out of writing neat, accurate TSQL. If you want to try out SQL Prompt all the details are at http://www.red-gate.com/products/sql-development/sql-prompt/.

    Read the article

  • How do you go from a so so programmer to a great one? [closed]

    - by Cervo
    How do you go from being an okay programmer to being able to write maintainable clean code? For example David Hansson was writing Basecamp when in the process he created Rails as part of writing Basecamp in a clean/maintainable way. But how do you know when there is value in a side project like that? I have a bachelors in computer science, and I am about to get a masters and I will say that colleges teach you to write code to solve problems, not neatly or anything. Basically you think of a problem, come up with a solution, and write it down...not necessarily the most maintainable way in the world. Also my first job was in a startup, and now my third is in a small team in a large company where the attitude was/is get it done yesterday (also most of my jobs are mainly database development with SQL with a few ASP.NET web pages/.NET apps on the side). So of course cut/paste is more favored than making things more cleanly. And they would rather have something yesterday even if you have to rewrite it next month rather than to have something in a week that lasts for a year. Also spaghetti code turns up all over the place, and it takes very smart people to write/understand/maintain spaghetti code...However it would be better to do things so simple/clean that even a caveman/woman could do maintenance. Also I get very bored/unmotivated having to go modify the same things cut/pasted in a few locations. Is this the type of skill that you need to learn by working with a serious software organization that has an emphasis on maintenance and maybe even an architect who designs a system architecture and reviews code? Could you really learn it by volunteering on an open source project (it seems to me that a full time programmer job is way more practice than a few hours a week on an open source project)? Is there some course where you can learn this? I can attest that graduate school and undergraduate school do not really emphasize clean software at all. They just teach the structures/algorithms and then send you off into the world to solve problems. Overall I think the first thing is learning to write clean/maintainable code within the bounds of the project in order to become a good programmer. Then the next thing is learning when you need to do a side project (like a framework) to make things more maintainable/clean even while you still deliver things for the deadline in order to become a great programmer. For example, you are making an SQL report and someone gives you 100 calculations for individual columns. At what point does it make sense to construct a domain specific language to encode the rules in simply and then generate all the SQL as opposed to cut/pasting the query from the table a bunch of times and then adjusting each query to do the appropriate calculations. This is the type of thing I would say a great programmer would know. He/she would maybe even know ways to avoid the domain specific language and to still do all the calculations without creating an unmaintainable mess or a ton of repetitive code to cut/paste everywhere.

    Read the article

  • jqtouch / google maps api v3 issue

    - by Rigo Vides
    Hi everyone, I'm having a hard time triying to make jQtouch and Google Maps api V3 together. I've tried almost everything. It seems that the only source of information is here I checked every single post. I'm starting with jQuery and css... so there's a lot of stuff I don't understand. First of all, I'm using jQtouch framework to build a web app with google maps integration, the problem is that whenever I pan the map, strange flickering occurs. It's like jQtouch and the map are trying to fight for a callback. I'm using the latest revision out there. And have several bugs, regarding transition/animation functionality (since I don't wrap the map and all the element's divs within the #jqt wrapper) and css issues with some styling. Anyone has successfully achieve a functional setup build for this scenario? (google maps api v3 & jqtouch), I think is not necessary to paste you some code (But if you think is necessary please let me know and I'll do it), If you paste me a minimal example with a map (detailing jqtouch version, and modification to the styles/.js files), and some transition back and forth from the map to another div/section/page, you'll get the bounty. Thanks a lot in advance. And please, let me know if this is kind of 'legal' here, I mean, there's too loose information on the official wiki, and like 13 'solutions' but nothing concrete... I'm just triying to help anyone who step on in this problem in the future.

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >