Search Results

Search found 963 results on 39 pages for 'peer pressure'.

Page 26/39 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Errno socket error in python

  - by Emma

  i wrote this code : import random import sys import urllib openfile = open(sys.argv[1]).readlines() c = random.choice(openfile) i = 0 while i < 5: i=i+1 c = random.choice(openfile) proxies = {'http': c} opener = urllib.FancyURLopener(proxies).open("http://whatismyip.com.au/").read() ::: I put 3 proxy in a txt file . : http://211.161.159.74:8080 http://119.70.40.101:8080 http://124.42.10.119:8080 but when execute it i get this error : IOError: [Errno socket error] (10054, 'Connection reset by peer') what am i going to do ? please help me .

  Read the article

• Can not clone git repo to server

  - by Classified

  I'm running the same command on 2 different servers. One works, the other doesn't. I'm running git clone https://blah.com:8443/blah.git On server A, it works fine. I get the objects, files, etc. no problems. On server B, I get the following message. git clone https://blah.com:8443/blah.git Cloning into 'blah'... error: Peer certificate cannot be authenticated with known CA certificates while accessing https://blah.com:8443/blah.git/info/refs?service=git-upload-pack fatal: HTTP request failed Does anyone know what this means or what I need to do to get this to work? Thanks in advance for any help you can give me.

  Read the article

• Which Linux distribution for vehicle LCD instrument panel

  - by Brent

  I will be designing an instrument panel for a vehicle to display the common gauges that you would find in a car - (speedometer, rpm, fuel level, oil pressure, etc.). We have selected a 7" LCD and are in the process of narrowing down the hardware (This will use an ARM processor). The idea is to read these values off of the CAN Bus and update the UI with those values. This needs to have a fairly quick boot time, 5-10 seconds would be acceptable from the time the ignigtion is turned on to the time the UI is running. I have been doing a lot of research on which linux distribution to use, but I wanted to ask the question here to get the community's suggestions. I have been a .NET programmer for years, so linux is a new world to me. Here is what I have found so far... Tizen is geared for In-Vehicle Infotainment (IVI) (plus some others). However, this project is not an IVI, and I do not need the phone dialer, navigation, etc. Meego is dead, and Tizen seems to be the replacement Angstrom, Debian... would either of these be useful? I am not tied to a particular programming language or IDE. Any help and direction is appreciated!

  Read the article

• How to implement a bidirectional "mailbox service" over tcp?

  - by igorgatis

  The idea is to allow to peer processes to exchange messages (packets) over tcp as much asynchronously as possible. The way I'd like it to work is each process to have an outbox and an inbox. The send operation is just a push on the outbox. The receive operation is just a pop on the inbox. Underlying protocol would take care of the communication details. Is there a way to implement such mechanism using a single TCP connection? How would that be implemented using BSD sockets and modern OO Socket APIs (like Java or C# socket API)?

  Read the article

• Load Sharing Regarding Large Websites

  - by JHarley1

  Hello, I have a question regarding Load Sharing for large websites. My Understanding: So if you have a website that has millions of fits a day you will need to have an architecture that can support this sort of pressure. You can either do one or two things: Invest in a single large server that has huge amounts of processing power, memory and storage (such as Microsoft's TerraServer). Spread the load of your website across a number of machines. Let me tackle the second approach, so you have a collection of machines all running Web Server Software and all having access to identical copies of the websites pages. You can either spread the load across these machines using a cyclic pattern in a DNS or you can use a Load Ballancing Switch. The advantages of this approach is: - Redundancy - servers can fail and the others would "pick up the slack" - Incremental - the ability to easily add new machines to this set-up. My Question's Is there a Virtual approach to this issue of load balancing now? If the website runs from a database - is there still only a single copy of the database? If a user had a session running on one Server (e.g. they had gone to www.example.org and had been assigned to Server 2 - were they had created a session) if they refreshed the website (and were allocated Server 3) would they still have their session? What are the other disadvantages associated with Load Balancing? Many Thanks, J

  Read the article

• Machine Learning Algorithm for Parallel Nodes

  - by FreshCode

  I want to apply machine learning to a classification problem in a parallel environment. Several independent nodes, each with multiple on/off sensors, can communicate their sensor data with the goal of classifying an event defined by a heuristic, training data or both. Each peer will be measuring the same data from their unique perspective and will attempt to classify the result while taking into account that any neighbouring node (or its sensors or just the connection to the node) could be faulty. Nodes should function as equal peers and determine the most likely classification by communicating their results. Ultimately each node should make a decision based on their own sensor data and their peers' data. If it matters, false positives are OK (albeit undesirable) but false negatives are totally unacceptable. Given that each final classification will receive good or bad feedback, what would be an appropriate machine learning algorithm to approach this problem with if the nodes could communicate with each other to determine the most likely classification?

  Read the article

• Annoying trackpad freeze on MacBook [solved]

  - by Hafthor

  NOTE: Question marked answered because it was forced after being put up for bounty. Actual solution was to have Apple repair it. Trackpad usually works, but sometimes stops responding for around 5 seconds and then suddenly starts working again. Seems to happen when I switch between typing and moving + button-clicking and also when I do a lot of double-clicking. Tried turning off the "Ignore accidental trackpad input". Apple replaced the keyboard/mouse under warranty. Problem remains. Any ideas? Edit: White non-unibody Late-2008 13" MacBook - fully up-to-date OS. Doesn't seem to matter if it is plugged in or not. Edit: Updated to Snow Leopard - seems to have made it worse. Edit: Applying even a little pressure to the left palm rest creates this condition. Apple replaced the top case again and this time it seems to have fixed it. Although, it looks like they may have added a spacer on the left palm rest to "fix" it.

  Read the article

• Errors when connecting to HTTPS using HTTP::Net routines (Ruby on Rails)

  - by jaycode

  Hi all, the code below explains the problem in detail #this returns error Net::HTTPBadResponse url = URI.parse('https://sitename.com') response = Net::HTTP.start(url.host, url.port) {|http| http.get('/remote/register_device') } #this works url = URI.parse('http://sitename.com') response = Net::HTTP.start(url.host, url.port) {|http| http.get('/remote/register_device') } #this returns error Net::HTTPBadResponse response = Net::HTTP.post_form(URI.parse('https://sitename.com/remote/register_device'), {:text => 'hello world'}) #this returns error Errno::ECONNRESET (Connection reset by peer) response = Net::HTTP.post_form(URI.parse('https://sandbox.itunes.apple.com/verifyReceipt'), {:text => 'hello world'}) #this works response = Net::HTTP.post_form(URI.parse('http://sitename.com/remote/register_device'), {:text => 'hello world'}) So... how do I send POST parameters to https://sitename.com or https://sandbox.itunes.apple.com/verifyReceipt in this example? Further information, I am trying to get this working in Rails: http://developer.apple.com/iphone/library/documentation/NetworkingInternet/Conceptual/StoreKitGuide/VerifyingStoreReceipts/VerifyingStoreReceipts.html#//apple_ref/doc/uid/TP40008267-CH104-SW1

  Read the article

• Implement a vpn

  - by jackson

  I want to build an application client(client.exe) - server to do the following: when the clients run it they are thrown in a VPN and they can communicate each other within 1 applicataion. For example : clients run client.exe and they can see each other in LAN ONLY in Starcraft. From what i have read the right type of vpn for this situation is Secured Socket Tunneling Protocol: "Secure socket tunneling protocol, also referred to as SSTP, is by definition an application-layer protocol. It is designed to employ a synchronous communication in a back and forth motion between two programs. It allows many application endpoints over one network connection, between peer nodes, thereby enabling efficient usage of the communication resources that are available to that network. " Question: I don't have experience with networking programming so my question for the ones who have, is this the right approach? PS1: i don't want something done like OpenVpn, i do this as learning exercise. PS2: the application is targeting Windows and i plan to use .NET Thanks for reading the whole story, i am waiting for your replies.

  Read the article

• How can I do a partial update (i.e., get isolated changesets) from subversion with subclipse?

  - by Ingvald

  If a file is committed several times with various changes, how can I fetch one change at a time, i.e., one changeset at a time? I use eclipse, subversion, and subclipse, and I can't change the former two for the time being (or the MS platform..). In my list/ overview a file seems to be listed only in the latest relevant changeset even if all changesets are listed. So an earlier changeset doesn't necessarily show the full set of files in the original commit, nor the original diff for a file in a commit. Update: I'm thinking about using changesets for simplified peer review, so I'd like the partial update represented for all the files commited in one changeset. It's easy to get diffs and specific revisions for specific files in eclipse, but I'd like to step through all the changes in one specific commit/ changeset in a practical manner.

  Read the article

• Stuck with luasec LUA secure socket

  - by PeterMmm

  This example code fails: require("socket") require("ssl") -- TLS/SSL server parameters local params = { mode = "server", protocol = "sslv23", key = "server.key", certificate = "server.crt", cafile = "server.key", password = "123456", verify = {"peer", "fail_if_no_peer_cert"}, options = {"all", "no_sslv2"}, ciphers = "ALL:!ADH:@STRENGTH", } local socket = require("socket") local server = socket.bind("*", 8888) local client = server:accept() client:settimeout(10) -- TLS/SSL initialization local conn,emsg = ssl.wrap(client, params) print(emsg) conn:dohandshake() -- conn:send("one line\n") conn:close() request https://localhost:8888/ output error loading CA locations ((null)) lua: a.lua:25: attempt to index local 'conn' (a nil value) stack traceback: a.lua:25: in main chunk [C]: ? Not very much info. Any idea how to trace down to the problem ?

  Read the article

• Should I partition my main table with 2 millions rows?

  - by domribaut

  Hi, I am a developer and would need some DBA-advices. We are starting to get performance problem with a MSSQL2005 database. The visible effects of the incidents is mainly CPU-hog on the server but operations reported that it was also draining resources from the SAN (not always). the main source of issues is for sure in some application but I am wondering if we should partition some of the main tables anyway in order to relax the I/O pressure. The base is about 60GB in one file. The main table (order) has 2.1 Million rows with a 215 colones (but none is huge). We have an integer as PK so it should be OK to define a partition function. Will we win something with partitioning? will partition indexes buy us something? Here are some more facts about the DB and the table database_name database_size unallocated space My_base 57173.06 MB 79.74 MB reserved data index_size unused 29 444 808 KB 26 577 320 KB 2 845 232 KB 22 256 KB name rows reserved data index_size unused Order 2 097 626 4 403 832 KB 2 756 064 KB 1 646 080 KB 1688 KB Thanks for any advice Dom

  Read the article

• Barriers to IPv6 deployment: addressing

  - by sysadmin1138

  There are several things that are keeping IPv6 deployment from being a topic of active discussion here at my work. There are the usual technical issues, but one non-technical one appears to be a major stumbling block on the path to actually getting a deployment project going. Addresses, memorizing of. Specifically, IPv4 addresses are comprehensible, and IPv6 addresses just look like a big long string of hex. The human mind has real trouble memorizing lists of more than 7-8 items, and an IPv4 address (192.168.231.148) has four items in it which makes it easy for us to memorize. A fully populated IPv6 address has not only 8 sections, but each section has 4 hex digits in it. IPv6 addresses were not designed for memorization. To the technician who knows that the DNS server is at 192.168.42.42 (or more likely "42.42", since the company prefix is likely memorized), the idea of memorizing an IPv6 address fills them with dread. Which in turn makes them much less enthusiastic about participating in an IPv6 deployment project. Because of how our network works we're not fully dynamic in terms of v4 addressing. We have several to many subnets that are entirely statically assigned for a variety of reasons, chief among them being that the overhead of static DHCP assignments is perceived as being too great. Also, some devices still aren't smart enough to pull DNS addresses out of DHCP while also having a static assignment, and therefore require manually configured DNS settings. Therefore, some v6 address memorization will have to be done. We're not under any mandate to get v6 out the door, so we don't have pressure from the top. However, it is time to start prepping our infrastructure to handle IPv6 even if we don't convert wholesale. For those of you who have been in IPv6-land for a while, what short-cut methods do you use to discuss or keep track of subnets and specific/critical IP addresses? If I can help reduce some of the dread surrounding IPv6 we might get the project going.

  Read the article

• Google bots are severely affecting site performance

  - by Lynn

  I have an aggregate site on a linux server that pulls in feeds from a universe of about 2,000 blogs. It's in Wordpress 3.4.2 and I have a cron job that is staggered to run five times an hour on another server to pull in the stories and then publish them to the front page of this site. This is so I didn't put too much pressure all on one server. However, the Google bots, which visit a few times every hour bring the server to its knees in the morning and evenings when there is an increase in traffic on the site. The bots have something like 30,000 links to follow at this point. How do I throttle the bots to simply grab the new stories off the front page and stop there? EDIT- Details of my server configuration: The way we have this set up is the server that handles all the publishing is an unmanaged instance via AWS. It mounts the NFS server and connects to the RDS to update content, etc. You get to this publishing instance via a plugin that detects the wp-admin link and then redirects you into there. The front end app server also mounts the NFS and requests data from the RDS. It is the only one that has the WP Super Cache on it.... The OS is Ubuntu on the App server and the NFS runs CentOs. The front end is Nginx and the publishing server is Apache.

  Read the article

• Why isn't my phone charging with some micro usb cables?

  - by Jacxel

  I ordered 3 microUSB cables over ebay. My phone was at about 50% battery and I wanted to use it as a hot spot for some browsing on my laptop, so I plugged it in, a charging icon appeared on the phone, my laptop showed it as a connected usb device and so I went about my business. About 30 minutes later I checked the phone and to my dismay saw 45% battery. But ahh, I thought, I have been putting the poor little thing under too much pressure, acting as a WiFi hotspot must drain the battery quicker than it can charge via usb, perhaps even using my laptops usb port wouldn't output enough power. Unscathed I continued on and when I was going to bed I plugged the usb cable into a mains adapter and switched everything battery consuming off and content, went to sleep. The next morning I was awoken by my phones alarm which got cut off unexpectedly. I attempted to unlock my phone which showed no more signs of life. Why isn't my phone charging with these new USB cables? For clarity: They transfer data with no problems The phone appears to be charging, showing all the signs and lights it normally would, the cable that came with the phone works as you would expect, so its not a fault with the phone, I think they slow the discharging of the phone, but I could be wrong. Are these just bad quality cables? Is there a way to fix this issue?

  Read the article

• Help with calling a secure (SSL) webservice in Android.

  - by mmattax

  I'm new to Android and am struggling to make a call to an SSL web service for an Android Application. My code is as follows: Log.v("fs", "Making HTTP call..."); HttpClient http = new DefaultHttpClient(); HttpGet request = new HttpGet("https://example.com/api"); try { String response = http.execute(request, new BasicResponseHandler()); Log.v("fs", response); } catch (Exception e) { Log.v("fs", e.toString()); } The Output is: Making HTTP call... javax.net.SSLPeerUnverifiedException: No peer certificate Any suggestions to make this work would be great. EDIT I should note that this is a valid cert. It is not self-signed.

  Read the article

• Users getting 'flooded' with not read notifications (NRNs) for old emails and meeting requests

  - by Exile

  I'm being placed under quite a lot of pressure from senior management over a relatively trivial issue. Basically the vast majority of users are complaining that they receive not read notifications (NRNs) for old emails and meeting requests in large numbers multiple times a day. I know something strange is happening because some are delivered at silly times in the morning (i.e 3AM or 4AM). The problem I have is that these some of these NRNs are from meeting requests and messages that are 120 days old, so some users have deleted the original message so I don’t actually know if the NRN is from an email or meeting request. This is typical of what users receive as a NRN: From: Sender Sent: 23 March 2012 04:16 To: Recepient Subject: Not read: Accepted: Status update Your message To: Sender Subject: Accepted: Status update Sent: Wednesday, November 23, 2011 8:59:00 AM (UTC) Dublin, Edinburgh, Lisbon, London was deleted without being read on Friday, March 23, 2012 4:15:32 AM (UTC) Dublin, Edinburgh, Lisbon, London. ... From: Sender Sent: 18 March 2012 01:13 To: Recepient Subject: Not read: Gold delivery - Sourcing module Your message To: Sender Subject: Gold delivery - Sourcing module Sent: Friday, November 18, 2011 9:37:58 AM (UTC) Dublin, Edinburgh, Lisbon, London was deleted without being read on Sunday, March 18, 2012 1:12:37 AM (UTC) Dublin, Edinburgh, Lisbon, London. I have done a search and found the following: http://support.microsoft.com/kb/2544246 http://support.microsoft.com/kb/2471964 But we already installed 'Update Rollup 6 for Exchange Server 2010 Service Pack 1' back in December, so I am not sure what we can do to fix this?

  Read the article

• does leaving the laptop cord in break the cord?

  - by firedrake

  i recently got a new cord for my laptop because the cord i had before broke.im not sure how it got messed up, but one moment it charged my laptop and the next moment it didn't. i then got a new cord. the new cord worked perfectly fine until now, and it has only been a month. the cord wont work unless i am pressing it into the socket, which i am currently doing. the only thing i can find in common with the cords is that i leave them plugged in 24/7. my brother says that is the problem, but i do not think it is.any tips or hints? im going to use duct tape to keep the pressure on the cord till i can find a better solution(im also thinking it could be the hole i plug it into on the back of my computer, but im focusing on the other idea for now.if i wiggle the plug part in the socket of my computer it will stop charging unless im pressing it in or to the side) any help or ideas are appreciated. not sure if this will help but i use a gateway with windows vista. thanks

  Read the article

• What Use are Threads Outside of Parallel Problems on MultiCore Systesm?

  - by Robert S. Barnes

  Threads make the design, implementation and debugging of a program significantly more difficult. Yet many people seem to think that every task in a program that can be threaded should be threaded, even on a single core system. I can understand threading something like an MPEG2 decoder that's going to run on a multicore cpu ( which I've done ), but what can justify the significant development costs threading entails when you're talking about a single core system or even a multicore system if your task doesn't gain significant performance from a parallel implementation? Or more succinctly, what kinds of non-performance related problems justify threading? Edit Well I just ran across one instance that's not CPU limited but threads make a big difference: TCP, HTTP and the Multi-Threading Sweet Spot Multiple threads are pretty useful when trying to max out your bandwidth to another peer over a high latency network connection. Non-blocking I/O would use significantly less local CPU resources, but would be much more difficult to design and implement.

  Read the article

• Reason for not properly closed socket?

  - by gc

  Here is what I am trying to do: The server sends message to connected clients when new messages are available. The client, on the other hand, when connected, tries to send a message to the server using send() and then receive message using recv(), right after that, the client calls close() to close the connection. Sometimes, after the client finishes, the server tries to receive message from client will result in a 104 - "connection reset by peer" error. When this happens, Wireshark reveals that the last two segments sent by the client is: 1. an ACK acknowledging the receipt of the message sent by the server 2. a RST/ACK No FIN is sent by the client. Why is this happening and how can I close the socket "properly" at the client?

  Read the article

• Is GOTO really as evil as we are led to believe?

  - by RoboShop

  I'm a young programmer, so all my working life I've been told GOTO is evil, don't use it, if you do, your first born son will die. Recently, I've realized that GOTO actually still exists in .NET and I was wondering, is GOTO really as bad as they say, or is it just because everyone says you shouldn't use it, so that's why you don't. I know GOTO can be used badly, but are there any legit situations where you may possibly use it. The only thing I can think of is maybe to use GOTO to break out of a bunch of nested loops. I reckon that might be better then having to "break" out of each of them but because GOTO is supposedly always bad, I would never use it and it would probably never pass a peer review. What are your views? Is GOTO always bad? Can it sometimes be good? Has anyone here actually been gutsy enough to use GOTO for a real life system?

  Read the article

• Sending bulk notification emails without blocking

  - by FreshCode

  For my client's custom-built CRM, I want users (technicians) to be notified of changes to marked cases via email. This warrants a simple subscription mapping table between users and cases and automated emails to be sent every time a change is made to a case from within the logging method. How do I send 10-100 emails to subscribed users without bogging down my logging method? My SMTP server is on a peer on my LAN, so sends should be quick, but ideally this should be handled by an external queuing process. I can have a cron job send any outstanding emails every 10 minutes, but for this specific client cases are quite time-sensitive and instant notification (as instant as email can be) would be great. How can I send bulk notification emails from within ASP.NET MVC without bogging down my logging method?

  Read the article

• Stronger laptop_mode in Linux

  - by Vi

  Can I have stronger laptop mode in Linux? I want to spin down the hard drive and prevent it to spin up even if something wants to read something not in cache. In general I want to have these modes: Normal Current laptop mode Stronger laptop mode: spin up only when needs to read something uncached (and cache it). No spinups to write something unless really memory pressure (Exception: explicit "sync" command in console). Kernel is allowed to keep processes in D-sleep for 10 seconds for that. Forced laptop mode: do not spin up, period. Keep offending processes in D-sleep unless I turn off this mode. Like there is a bomb instead of hard drive. I also want to have access times tracked (mount -o atime), but I don't want the hard drive to be spinned up only to update them. Is there some settings or kernel patches that can get closer to this? May be I should write special io scheduler for "forced laptop mode"? E.g. echo suspend > /sys/block/sda/queue/scheduler to lock the drive and echo cfq > /ys/block/sda/queue/scheduler to unlock it again?

  Read the article

• tomcat 6.0.18 HTTPS not working

  - by user180152

  Hi, I am trying to configure tomcat for HTTPS on localhost. I am using self signed certification. I added folowing line of code to server.xml. <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" minSpareThreads="25" maxSpareThreads="75" enableLookups="false" disableUploadTimeout="true" acceptCount="100" debug="0" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" SSLEngine="on" keystoreFile="path-to-keystore" keystorePass="password" /> I am getting following error in browser: An error occurred during a connection to localhost:8443. Peer reports it experienced an internal error. (Error code: ssl_error_internal_error_alert) Can anybody guide me to proper direction. Thanks.

  Read the article

• tsql sum data and include default values for missing data

  - by markpirvine

  Hi, I would like a query that will shouw a sum of columns with a default value for missing data. For example assume I have a table as follows: type_lookup: id name 1 self 2 manager 3 peer And a table as follows data: id type_lookup_id value 1 1 1 2 1 4 3 2 9 4 2 1 5 2 9 6 1 5 7 2 6 8 1 2 9 1 1 After running a query I would like a result set as follows: type_lookup_id value 1 13 2 25 3 0 I would like all rows in type_lookup table to be included in the result set - even if they don't appear in the data table. Any help would be greatly appreciated, Mark

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >